Loading...
1/*
2 * Copyright (C) 2012-2013 MundoReader S.L.
3 * Author: Heiko Stuebner <heiko@sntech.de>
4 *
5 * based in parts on Nook zforce driver
6 *
7 * Copyright (C) 2010 Barnes & Noble, Inc.
8 * Author: Pieter Truter<ptruter@intrinsyc.com>
9 *
10 * This software is licensed under the terms of the GNU General Public
11 * License version 2, as published by the Free Software Foundation, and
12 * may be copied, distributed, and modified under those terms.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20#include <linux/module.h>
21#include <linux/hrtimer.h>
22#include <linux/slab.h>
23#include <linux/input.h>
24#include <linux/interrupt.h>
25#include <linux/i2c.h>
26#include <linux/delay.h>
27#include <linux/gpio.h>
28#include <linux/device.h>
29#include <linux/sysfs.h>
30#include <linux/input/mt.h>
31#include <linux/platform_data/zforce_ts.h>
32#include <linux/of.h>
33#include <linux/of_gpio.h>
34
35#define WAIT_TIMEOUT msecs_to_jiffies(1000)
36
37#define FRAME_START 0xee
38#define FRAME_MAXSIZE 257
39
40/* Offsets of the different parts of the payload the controller sends */
41#define PAYLOAD_HEADER 0
42#define PAYLOAD_LENGTH 1
43#define PAYLOAD_BODY 2
44
45/* Response offsets */
46#define RESPONSE_ID 0
47#define RESPONSE_DATA 1
48
49/* Commands */
50#define COMMAND_DEACTIVATE 0x00
51#define COMMAND_INITIALIZE 0x01
52#define COMMAND_RESOLUTION 0x02
53#define COMMAND_SETCONFIG 0x03
54#define COMMAND_DATAREQUEST 0x04
55#define COMMAND_SCANFREQ 0x08
56#define COMMAND_STATUS 0X1e
57
58/*
59 * Responses the controller sends as a result of
60 * command requests
61 */
62#define RESPONSE_DEACTIVATE 0x00
63#define RESPONSE_INITIALIZE 0x01
64#define RESPONSE_RESOLUTION 0x02
65#define RESPONSE_SETCONFIG 0x03
66#define RESPONSE_SCANFREQ 0x08
67#define RESPONSE_STATUS 0X1e
68
69/*
70 * Notifications are sent by the touch controller without
71 * being requested by the driver and include for example
72 * touch indications
73 */
74#define NOTIFICATION_TOUCH 0x04
75#define NOTIFICATION_BOOTCOMPLETE 0x07
76#define NOTIFICATION_OVERRUN 0x25
77#define NOTIFICATION_PROXIMITY 0x26
78#define NOTIFICATION_INVALID_COMMAND 0xfe
79
80#define ZFORCE_REPORT_POINTS 2
81#define ZFORCE_MAX_AREA 0xff
82
83#define STATE_DOWN 0
84#define STATE_MOVE 1
85#define STATE_UP 2
86
87#define SETCONFIG_DUALTOUCH (1 << 0)
88
89struct zforce_point {
90 int coord_x;
91 int coord_y;
92 int state;
93 int id;
94 int area_major;
95 int area_minor;
96 int orientation;
97 int pressure;
98 int prblty;
99};
100
101/*
102 * @client the i2c_client
103 * @input the input device
104 * @suspending in the process of going to suspend (don't emit wakeup
105 * events for commands executed to suspend the device)
106 * @suspended device suspended
107 * @access_mutex serialize i2c-access, to keep multipart reads together
108 * @command_done completion to wait for the command result
109 * @command_mutex serialize commands sent to the ic
110 * @command_waiting the id of the command that is currently waiting
111 * for a result
112 * @command_result returned result of the command
113 */
114struct zforce_ts {
115 struct i2c_client *client;
116 struct input_dev *input;
117 const struct zforce_ts_platdata *pdata;
118 char phys[32];
119
120 bool suspending;
121 bool suspended;
122 bool boot_complete;
123
124 /* Firmware version information */
125 u16 version_major;
126 u16 version_minor;
127 u16 version_build;
128 u16 version_rev;
129
130 struct mutex access_mutex;
131
132 struct completion command_done;
133 struct mutex command_mutex;
134 int command_waiting;
135 int command_result;
136};
137
138static int zforce_command(struct zforce_ts *ts, u8 cmd)
139{
140 struct i2c_client *client = ts->client;
141 char buf[3];
142 int ret;
143
144 dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
145
146 buf[0] = FRAME_START;
147 buf[1] = 1; /* data size, command only */
148 buf[2] = cmd;
149
150 mutex_lock(&ts->access_mutex);
151 ret = i2c_master_send(client, &buf[0], ARRAY_SIZE(buf));
152 mutex_unlock(&ts->access_mutex);
153 if (ret < 0) {
154 dev_err(&client->dev, "i2c send data request error: %d\n", ret);
155 return ret;
156 }
157
158 return 0;
159}
160
161static int zforce_send_wait(struct zforce_ts *ts, const char *buf, int len)
162{
163 struct i2c_client *client = ts->client;
164 int ret;
165
166 ret = mutex_trylock(&ts->command_mutex);
167 if (!ret) {
168 dev_err(&client->dev, "already waiting for a command\n");
169 return -EBUSY;
170 }
171
172 dev_dbg(&client->dev, "sending %d bytes for command 0x%x\n",
173 buf[1], buf[2]);
174
175 ts->command_waiting = buf[2];
176
177 mutex_lock(&ts->access_mutex);
178 ret = i2c_master_send(client, buf, len);
179 mutex_unlock(&ts->access_mutex);
180 if (ret < 0) {
181 dev_err(&client->dev, "i2c send data request error: %d\n", ret);
182 goto unlock;
183 }
184
185 dev_dbg(&client->dev, "waiting for result for command 0x%x\n", buf[2]);
186
187 if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0) {
188 ret = -ETIME;
189 goto unlock;
190 }
191
192 ret = ts->command_result;
193
194unlock:
195 mutex_unlock(&ts->command_mutex);
196 return ret;
197}
198
199static int zforce_command_wait(struct zforce_ts *ts, u8 cmd)
200{
201 struct i2c_client *client = ts->client;
202 char buf[3];
203 int ret;
204
205 dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
206
207 buf[0] = FRAME_START;
208 buf[1] = 1; /* data size, command only */
209 buf[2] = cmd;
210
211 ret = zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
212 if (ret < 0) {
213 dev_err(&client->dev, "i2c send data request error: %d\n", ret);
214 return ret;
215 }
216
217 return 0;
218}
219
220static int zforce_resolution(struct zforce_ts *ts, u16 x, u16 y)
221{
222 struct i2c_client *client = ts->client;
223 char buf[7] = { FRAME_START, 5, COMMAND_RESOLUTION,
224 (x & 0xff), ((x >> 8) & 0xff),
225 (y & 0xff), ((y >> 8) & 0xff) };
226
227 dev_dbg(&client->dev, "set resolution to (%d,%d)\n", x, y);
228
229 return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
230}
231
232static int zforce_scan_frequency(struct zforce_ts *ts, u16 idle, u16 finger,
233 u16 stylus)
234{
235 struct i2c_client *client = ts->client;
236 char buf[9] = { FRAME_START, 7, COMMAND_SCANFREQ,
237 (idle & 0xff), ((idle >> 8) & 0xff),
238 (finger & 0xff), ((finger >> 8) & 0xff),
239 (stylus & 0xff), ((stylus >> 8) & 0xff) };
240
241 dev_dbg(&client->dev,
242 "set scan frequency to (idle: %d, finger: %d, stylus: %d)\n",
243 idle, finger, stylus);
244
245 return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
246}
247
248static int zforce_setconfig(struct zforce_ts *ts, char b1)
249{
250 struct i2c_client *client = ts->client;
251 char buf[7] = { FRAME_START, 5, COMMAND_SETCONFIG,
252 b1, 0, 0, 0 };
253
254 dev_dbg(&client->dev, "set config to (%d)\n", b1);
255
256 return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
257}
258
259static int zforce_start(struct zforce_ts *ts)
260{
261 struct i2c_client *client = ts->client;
262 const struct zforce_ts_platdata *pdata = ts->pdata;
263 int ret;
264
265 dev_dbg(&client->dev, "starting device\n");
266
267 ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
268 if (ret) {
269 dev_err(&client->dev, "Unable to initialize, %d\n", ret);
270 return ret;
271 }
272
273 ret = zforce_resolution(ts, pdata->x_max, pdata->y_max);
274 if (ret) {
275 dev_err(&client->dev, "Unable to set resolution, %d\n", ret);
276 goto error;
277 }
278
279 ret = zforce_scan_frequency(ts, 10, 50, 50);
280 if (ret) {
281 dev_err(&client->dev, "Unable to set scan frequency, %d\n",
282 ret);
283 goto error;
284 }
285
286 ret = zforce_setconfig(ts, SETCONFIG_DUALTOUCH);
287 if (ret) {
288 dev_err(&client->dev, "Unable to set config\n");
289 goto error;
290 }
291
292 /* start sending touch events */
293 ret = zforce_command(ts, COMMAND_DATAREQUEST);
294 if (ret) {
295 dev_err(&client->dev, "Unable to request data\n");
296 goto error;
297 }
298
299 /*
300 * Per NN, initial cal. take max. of 200msec.
301 * Allow time to complete this calibration
302 */
303 msleep(200);
304
305 return 0;
306
307error:
308 zforce_command_wait(ts, COMMAND_DEACTIVATE);
309 return ret;
310}
311
312static int zforce_stop(struct zforce_ts *ts)
313{
314 struct i2c_client *client = ts->client;
315 int ret;
316
317 dev_dbg(&client->dev, "stopping device\n");
318
319 /* Deactivates touch sensing and puts the device into sleep. */
320 ret = zforce_command_wait(ts, COMMAND_DEACTIVATE);
321 if (ret != 0) {
322 dev_err(&client->dev, "could not deactivate device, %d\n",
323 ret);
324 return ret;
325 }
326
327 return 0;
328}
329
330static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
331{
332 struct i2c_client *client = ts->client;
333 const struct zforce_ts_platdata *pdata = ts->pdata;
334 struct zforce_point point;
335 int count, i, num = 0;
336
337 count = payload[0];
338 if (count > ZFORCE_REPORT_POINTS) {
339 dev_warn(&client->dev,
340 "too many coordinates %d, expected max %d\n",
341 count, ZFORCE_REPORT_POINTS);
342 count = ZFORCE_REPORT_POINTS;
343 }
344
345 for (i = 0; i < count; i++) {
346 point.coord_x =
347 payload[9 * i + 2] << 8 | payload[9 * i + 1];
348 point.coord_y =
349 payload[9 * i + 4] << 8 | payload[9 * i + 3];
350
351 if (point.coord_x > pdata->x_max ||
352 point.coord_y > pdata->y_max) {
353 dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
354 point.coord_x, point.coord_y);
355 point.coord_x = point.coord_y = 0;
356 }
357
358 point.state = payload[9 * i + 5] & 0x03;
359 point.id = (payload[9 * i + 5] & 0xfc) >> 2;
360
361 /* determine touch major, minor and orientation */
362 point.area_major = max(payload[9 * i + 6],
363 payload[9 * i + 7]);
364 point.area_minor = min(payload[9 * i + 6],
365 payload[9 * i + 7]);
366 point.orientation = payload[9 * i + 6] > payload[9 * i + 7];
367
368 point.pressure = payload[9 * i + 8];
369 point.prblty = payload[9 * i + 9];
370
371 dev_dbg(&client->dev,
372 "point %d/%d: state %d, id %d, pressure %d, prblty %d, x %d, y %d, amajor %d, aminor %d, ori %d\n",
373 i, count, point.state, point.id,
374 point.pressure, point.prblty,
375 point.coord_x, point.coord_y,
376 point.area_major, point.area_minor,
377 point.orientation);
378
379 /* the zforce id starts with "1", so needs to be decreased */
380 input_mt_slot(ts->input, point.id - 1);
381
382 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER,
383 point.state != STATE_UP);
384
385 if (point.state != STATE_UP) {
386 input_report_abs(ts->input, ABS_MT_POSITION_X,
387 point.coord_x);
388 input_report_abs(ts->input, ABS_MT_POSITION_Y,
389 point.coord_y);
390 input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
391 point.area_major);
392 input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
393 point.area_minor);
394 input_report_abs(ts->input, ABS_MT_ORIENTATION,
395 point.orientation);
396 num++;
397 }
398 }
399
400 input_mt_sync_frame(ts->input);
401
402 input_mt_report_finger_count(ts->input, num);
403
404 input_sync(ts->input);
405
406 return 0;
407}
408
409static int zforce_read_packet(struct zforce_ts *ts, u8 *buf)
410{
411 struct i2c_client *client = ts->client;
412 int ret;
413
414 mutex_lock(&ts->access_mutex);
415
416 /* read 2 byte message header */
417 ret = i2c_master_recv(client, buf, 2);
418 if (ret < 0) {
419 dev_err(&client->dev, "error reading header: %d\n", ret);
420 goto unlock;
421 }
422
423 if (buf[PAYLOAD_HEADER] != FRAME_START) {
424 dev_err(&client->dev, "invalid frame start: %d\n", buf[0]);
425 ret = -EIO;
426 goto unlock;
427 }
428
429 if (buf[PAYLOAD_LENGTH] == 0) {
430 dev_err(&client->dev, "invalid payload length: %d\n",
431 buf[PAYLOAD_LENGTH]);
432 ret = -EIO;
433 goto unlock;
434 }
435
436 /* read the message */
437 ret = i2c_master_recv(client, &buf[PAYLOAD_BODY], buf[PAYLOAD_LENGTH]);
438 if (ret < 0) {
439 dev_err(&client->dev, "error reading payload: %d\n", ret);
440 goto unlock;
441 }
442
443 dev_dbg(&client->dev, "read %d bytes for response command 0x%x\n",
444 buf[PAYLOAD_LENGTH], buf[PAYLOAD_BODY]);
445
446unlock:
447 mutex_unlock(&ts->access_mutex);
448 return ret;
449}
450
451static void zforce_complete(struct zforce_ts *ts, int cmd, int result)
452{
453 struct i2c_client *client = ts->client;
454
455 if (ts->command_waiting == cmd) {
456 dev_dbg(&client->dev, "completing command 0x%x\n", cmd);
457 ts->command_result = result;
458 complete(&ts->command_done);
459 } else {
460 dev_dbg(&client->dev, "command %d not for us\n", cmd);
461 }
462}
463
464static irqreturn_t zforce_irq(int irq, void *dev_id)
465{
466 struct zforce_ts *ts = dev_id;
467 struct i2c_client *client = ts->client;
468
469 if (ts->suspended && device_may_wakeup(&client->dev))
470 pm_wakeup_event(&client->dev, 500);
471
472 return IRQ_WAKE_THREAD;
473}
474
475static irqreturn_t zforce_irq_thread(int irq, void *dev_id)
476{
477 struct zforce_ts *ts = dev_id;
478 struct i2c_client *client = ts->client;
479 const struct zforce_ts_platdata *pdata = ts->pdata;
480 int ret;
481 u8 payload_buffer[FRAME_MAXSIZE];
482 u8 *payload;
483
484 /*
485 * When still suspended, return.
486 * Due to the level-interrupt we will get re-triggered later.
487 */
488 if (ts->suspended) {
489 msleep(20);
490 return IRQ_HANDLED;
491 }
492
493 dev_dbg(&client->dev, "handling interrupt\n");
494
495 /* Don't emit wakeup events from commands run by zforce_suspend */
496 if (!ts->suspending && device_may_wakeup(&client->dev))
497 pm_stay_awake(&client->dev);
498
499 while (!gpio_get_value(pdata->gpio_int)) {
500 ret = zforce_read_packet(ts, payload_buffer);
501 if (ret < 0) {
502 dev_err(&client->dev,
503 "could not read packet, ret: %d\n", ret);
504 break;
505 }
506
507 payload = &payload_buffer[PAYLOAD_BODY];
508
509 switch (payload[RESPONSE_ID]) {
510 case NOTIFICATION_TOUCH:
511 /*
512 * Always report touch-events received while
513 * suspending, when being a wakeup source
514 */
515 if (ts->suspending && device_may_wakeup(&client->dev))
516 pm_wakeup_event(&client->dev, 500);
517 zforce_touch_event(ts, &payload[RESPONSE_DATA]);
518 break;
519
520 case NOTIFICATION_BOOTCOMPLETE:
521 ts->boot_complete = payload[RESPONSE_DATA];
522 zforce_complete(ts, payload[RESPONSE_ID], 0);
523 break;
524
525 case RESPONSE_INITIALIZE:
526 case RESPONSE_DEACTIVATE:
527 case RESPONSE_SETCONFIG:
528 case RESPONSE_RESOLUTION:
529 case RESPONSE_SCANFREQ:
530 zforce_complete(ts, payload[RESPONSE_ID],
531 payload[RESPONSE_DATA]);
532 break;
533
534 case RESPONSE_STATUS:
535 /*
536 * Version Payload Results
537 * [2:major] [2:minor] [2:build] [2:rev]
538 */
539 ts->version_major = (payload[RESPONSE_DATA + 1] << 8) |
540 payload[RESPONSE_DATA];
541 ts->version_minor = (payload[RESPONSE_DATA + 3] << 8) |
542 payload[RESPONSE_DATA + 2];
543 ts->version_build = (payload[RESPONSE_DATA + 5] << 8) |
544 payload[RESPONSE_DATA + 4];
545 ts->version_rev = (payload[RESPONSE_DATA + 7] << 8) |
546 payload[RESPONSE_DATA + 6];
547 dev_dbg(&ts->client->dev,
548 "Firmware Version %04x:%04x %04x:%04x\n",
549 ts->version_major, ts->version_minor,
550 ts->version_build, ts->version_rev);
551
552 zforce_complete(ts, payload[RESPONSE_ID], 0);
553 break;
554
555 case NOTIFICATION_INVALID_COMMAND:
556 dev_err(&ts->client->dev, "invalid command: 0x%x\n",
557 payload[RESPONSE_DATA]);
558 break;
559
560 default:
561 dev_err(&ts->client->dev,
562 "unrecognized response id: 0x%x\n",
563 payload[RESPONSE_ID]);
564 break;
565 }
566 }
567
568 if (!ts->suspending && device_may_wakeup(&client->dev))
569 pm_relax(&client->dev);
570
571 dev_dbg(&client->dev, "finished interrupt\n");
572
573 return IRQ_HANDLED;
574}
575
576static int zforce_input_open(struct input_dev *dev)
577{
578 struct zforce_ts *ts = input_get_drvdata(dev);
579 int ret;
580
581 ret = zforce_start(ts);
582 if (ret)
583 return ret;
584
585 return 0;
586}
587
588static void zforce_input_close(struct input_dev *dev)
589{
590 struct zforce_ts *ts = input_get_drvdata(dev);
591 struct i2c_client *client = ts->client;
592 int ret;
593
594 ret = zforce_stop(ts);
595 if (ret)
596 dev_warn(&client->dev, "stopping zforce failed\n");
597
598 return;
599}
600
601#ifdef CONFIG_PM_SLEEP
602static int zforce_suspend(struct device *dev)
603{
604 struct i2c_client *client = to_i2c_client(dev);
605 struct zforce_ts *ts = i2c_get_clientdata(client);
606 struct input_dev *input = ts->input;
607 int ret = 0;
608
609 mutex_lock(&input->mutex);
610 ts->suspending = true;
611
612 /*
613 * When configured as a wakeup source device should always wake
614 * the system, therefore start device if necessary.
615 */
616 if (device_may_wakeup(&client->dev)) {
617 dev_dbg(&client->dev, "suspend while being a wakeup source\n");
618
619 /* Need to start device, if not open, to be a wakeup source. */
620 if (!input->users) {
621 ret = zforce_start(ts);
622 if (ret)
623 goto unlock;
624 }
625
626 enable_irq_wake(client->irq);
627 } else if (input->users) {
628 dev_dbg(&client->dev,
629 "suspend without being a wakeup source\n");
630
631 ret = zforce_stop(ts);
632 if (ret)
633 goto unlock;
634
635 disable_irq(client->irq);
636 }
637
638 ts->suspended = true;
639
640unlock:
641 ts->suspending = false;
642 mutex_unlock(&input->mutex);
643
644 return ret;
645}
646
647static int zforce_resume(struct device *dev)
648{
649 struct i2c_client *client = to_i2c_client(dev);
650 struct zforce_ts *ts = i2c_get_clientdata(client);
651 struct input_dev *input = ts->input;
652 int ret = 0;
653
654 mutex_lock(&input->mutex);
655
656 ts->suspended = false;
657
658 if (device_may_wakeup(&client->dev)) {
659 dev_dbg(&client->dev, "resume from being a wakeup source\n");
660
661 disable_irq_wake(client->irq);
662
663 /* need to stop device if it was not open on suspend */
664 if (!input->users) {
665 ret = zforce_stop(ts);
666 if (ret)
667 goto unlock;
668 }
669 } else if (input->users) {
670 dev_dbg(&client->dev, "resume without being a wakeup source\n");
671
672 enable_irq(client->irq);
673
674 ret = zforce_start(ts);
675 if (ret < 0)
676 goto unlock;
677 }
678
679unlock:
680 mutex_unlock(&input->mutex);
681
682 return ret;
683}
684#endif
685
686static SIMPLE_DEV_PM_OPS(zforce_pm_ops, zforce_suspend, zforce_resume);
687
688static void zforce_reset(void *data)
689{
690 struct zforce_ts *ts = data;
691
692 gpio_set_value(ts->pdata->gpio_rst, 0);
693}
694
695static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev)
696{
697 struct zforce_ts_platdata *pdata;
698 struct device_node *np = dev->of_node;
699
700 if (!np)
701 return ERR_PTR(-ENOENT);
702
703 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
704 if (!pdata) {
705 dev_err(dev, "failed to allocate platform data\n");
706 return ERR_PTR(-ENOMEM);
707 }
708
709 pdata->gpio_int = of_get_gpio(np, 0);
710 if (!gpio_is_valid(pdata->gpio_int)) {
711 dev_err(dev, "failed to get interrupt gpio\n");
712 return ERR_PTR(-EINVAL);
713 }
714
715 pdata->gpio_rst = of_get_gpio(np, 1);
716 if (!gpio_is_valid(pdata->gpio_rst)) {
717 dev_err(dev, "failed to get reset gpio\n");
718 return ERR_PTR(-EINVAL);
719 }
720
721 if (of_property_read_u32(np, "x-size", &pdata->x_max)) {
722 dev_err(dev, "failed to get x-size property\n");
723 return ERR_PTR(-EINVAL);
724 }
725
726 if (of_property_read_u32(np, "y-size", &pdata->y_max)) {
727 dev_err(dev, "failed to get y-size property\n");
728 return ERR_PTR(-EINVAL);
729 }
730
731 return pdata;
732}
733
734static int zforce_probe(struct i2c_client *client,
735 const struct i2c_device_id *id)
736{
737 const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
738 struct zforce_ts *ts;
739 struct input_dev *input_dev;
740 int ret;
741
742 if (!pdata) {
743 pdata = zforce_parse_dt(&client->dev);
744 if (IS_ERR(pdata))
745 return PTR_ERR(pdata);
746 }
747
748 ts = devm_kzalloc(&client->dev, sizeof(struct zforce_ts), GFP_KERNEL);
749 if (!ts)
750 return -ENOMEM;
751
752 ret = devm_gpio_request_one(&client->dev, pdata->gpio_int, GPIOF_IN,
753 "zforce_ts_int");
754 if (ret) {
755 dev_err(&client->dev, "request of gpio %d failed, %d\n",
756 pdata->gpio_int, ret);
757 return ret;
758 }
759
760 ret = devm_gpio_request_one(&client->dev, pdata->gpio_rst,
761 GPIOF_OUT_INIT_LOW, "zforce_ts_rst");
762 if (ret) {
763 dev_err(&client->dev, "request of gpio %d failed, %d\n",
764 pdata->gpio_rst, ret);
765 return ret;
766 }
767
768 ret = devm_add_action(&client->dev, zforce_reset, ts);
769 if (ret) {
770 dev_err(&client->dev, "failed to register reset action, %d\n",
771 ret);
772 return ret;
773 }
774
775 snprintf(ts->phys, sizeof(ts->phys),
776 "%s/input0", dev_name(&client->dev));
777
778 input_dev = devm_input_allocate_device(&client->dev);
779 if (!input_dev) {
780 dev_err(&client->dev, "could not allocate input device\n");
781 return -ENOMEM;
782 }
783
784 mutex_init(&ts->access_mutex);
785 mutex_init(&ts->command_mutex);
786
787 ts->pdata = pdata;
788 ts->client = client;
789 ts->input = input_dev;
790
791 input_dev->name = "Neonode zForce touchscreen";
792 input_dev->phys = ts->phys;
793 input_dev->id.bustype = BUS_I2C;
794
795 input_dev->open = zforce_input_open;
796 input_dev->close = zforce_input_close;
797
798 __set_bit(EV_KEY, input_dev->evbit);
799 __set_bit(EV_SYN, input_dev->evbit);
800 __set_bit(EV_ABS, input_dev->evbit);
801
802 /* For multi touch */
803 input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
804 pdata->x_max, 0, 0);
805 input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
806 pdata->y_max, 0, 0);
807
808 input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
809 ZFORCE_MAX_AREA, 0, 0);
810 input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
811 ZFORCE_MAX_AREA, 0, 0);
812 input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
813 input_mt_init_slots(input_dev, ZFORCE_REPORT_POINTS, INPUT_MT_DIRECT);
814
815 input_set_drvdata(ts->input, ts);
816
817 init_completion(&ts->command_done);
818
819 /*
820 * The zforce pulls the interrupt low when it has data ready.
821 * After it is triggered the isr thread runs until all the available
822 * packets have been read and the interrupt is high again.
823 * Therefore we can trigger the interrupt anytime it is low and do
824 * not need to limit it to the interrupt edge.
825 */
826 ret = devm_request_threaded_irq(&client->dev, client->irq,
827 zforce_irq, zforce_irq_thread,
828 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
829 input_dev->name, ts);
830 if (ret) {
831 dev_err(&client->dev, "irq %d request failed\n", client->irq);
832 return ret;
833 }
834
835 i2c_set_clientdata(client, ts);
836
837 /* let the controller boot */
838 gpio_set_value(pdata->gpio_rst, 1);
839
840 ts->command_waiting = NOTIFICATION_BOOTCOMPLETE;
841 if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0)
842 dev_warn(&client->dev, "bootcomplete timed out\n");
843
844 /* need to start device to get version information */
845 ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
846 if (ret) {
847 dev_err(&client->dev, "unable to initialize, %d\n", ret);
848 return ret;
849 }
850
851 /* this gets the firmware version among other information */
852 ret = zforce_command_wait(ts, COMMAND_STATUS);
853 if (ret < 0) {
854 dev_err(&client->dev, "couldn't get status, %d\n", ret);
855 zforce_stop(ts);
856 return ret;
857 }
858
859 /* stop device and put it into sleep until it is opened */
860 ret = zforce_stop(ts);
861 if (ret < 0)
862 return ret;
863
864 device_set_wakeup_capable(&client->dev, true);
865
866 ret = input_register_device(input_dev);
867 if (ret) {
868 dev_err(&client->dev, "could not register input device, %d\n",
869 ret);
870 return ret;
871 }
872
873 return 0;
874}
875
876static struct i2c_device_id zforce_idtable[] = {
877 { "zforce-ts", 0 },
878 { }
879};
880MODULE_DEVICE_TABLE(i2c, zforce_idtable);
881
882#ifdef CONFIG_OF
883static struct of_device_id zforce_dt_idtable[] = {
884 { .compatible = "neonode,zforce" },
885 {},
886};
887MODULE_DEVICE_TABLE(of, zforce_dt_idtable);
888#endif
889
890static struct i2c_driver zforce_driver = {
891 .driver = {
892 .owner = THIS_MODULE,
893 .name = "zforce-ts",
894 .pm = &zforce_pm_ops,
895 .of_match_table = of_match_ptr(zforce_dt_idtable),
896 },
897 .probe = zforce_probe,
898 .id_table = zforce_idtable,
899};
900
901module_i2c_driver(zforce_driver);
902
903MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
904MODULE_DESCRIPTION("zForce TouchScreen Driver");
905MODULE_LICENSE("GPL");
1/*
2 * Copyright (C) 2012-2013 MundoReader S.L.
3 * Author: Heiko Stuebner <heiko@sntech.de>
4 *
5 * based in parts on Nook zforce driver
6 *
7 * Copyright (C) 2010 Barnes & Noble, Inc.
8 * Author: Pieter Truter<ptruter@intrinsyc.com>
9 *
10 * This software is licensed under the terms of the GNU General Public
11 * License version 2, as published by the Free Software Foundation, and
12 * may be copied, distributed, and modified under those terms.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20#include <linux/module.h>
21#include <linux/hrtimer.h>
22#include <linux/slab.h>
23#include <linux/input.h>
24#include <linux/interrupt.h>
25#include <linux/i2c.h>
26#include <linux/delay.h>
27#include <linux/gpio/consumer.h>
28#include <linux/device.h>
29#include <linux/sysfs.h>
30#include <linux/input/mt.h>
31#include <linux/platform_data/zforce_ts.h>
32#include <linux/regulator/consumer.h>
33#include <linux/of.h>
34
35#define WAIT_TIMEOUT msecs_to_jiffies(1000)
36
37#define FRAME_START 0xee
38#define FRAME_MAXSIZE 257
39
40/* Offsets of the different parts of the payload the controller sends */
41#define PAYLOAD_HEADER 0
42#define PAYLOAD_LENGTH 1
43#define PAYLOAD_BODY 2
44
45/* Response offsets */
46#define RESPONSE_ID 0
47#define RESPONSE_DATA 1
48
49/* Commands */
50#define COMMAND_DEACTIVATE 0x00
51#define COMMAND_INITIALIZE 0x01
52#define COMMAND_RESOLUTION 0x02
53#define COMMAND_SETCONFIG 0x03
54#define COMMAND_DATAREQUEST 0x04
55#define COMMAND_SCANFREQ 0x08
56#define COMMAND_STATUS 0X1e
57
58/*
59 * Responses the controller sends as a result of
60 * command requests
61 */
62#define RESPONSE_DEACTIVATE 0x00
63#define RESPONSE_INITIALIZE 0x01
64#define RESPONSE_RESOLUTION 0x02
65#define RESPONSE_SETCONFIG 0x03
66#define RESPONSE_SCANFREQ 0x08
67#define RESPONSE_STATUS 0X1e
68
69/*
70 * Notifications are sent by the touch controller without
71 * being requested by the driver and include for example
72 * touch indications
73 */
74#define NOTIFICATION_TOUCH 0x04
75#define NOTIFICATION_BOOTCOMPLETE 0x07
76#define NOTIFICATION_OVERRUN 0x25
77#define NOTIFICATION_PROXIMITY 0x26
78#define NOTIFICATION_INVALID_COMMAND 0xfe
79
80#define ZFORCE_REPORT_POINTS 2
81#define ZFORCE_MAX_AREA 0xff
82
83#define STATE_DOWN 0
84#define STATE_MOVE 1
85#define STATE_UP 2
86
87#define SETCONFIG_DUALTOUCH (1 << 0)
88
89struct zforce_point {
90 int coord_x;
91 int coord_y;
92 int state;
93 int id;
94 int area_major;
95 int area_minor;
96 int orientation;
97 int pressure;
98 int prblty;
99};
100
101/*
102 * @client the i2c_client
103 * @input the input device
104 * @suspending in the process of going to suspend (don't emit wakeup
105 * events for commands executed to suspend the device)
106 * @suspended device suspended
107 * @access_mutex serialize i2c-access, to keep multipart reads together
108 * @command_done completion to wait for the command result
109 * @command_mutex serialize commands sent to the ic
110 * @command_waiting the id of the command that is currently waiting
111 * for a result
112 * @command_result returned result of the command
113 */
114struct zforce_ts {
115 struct i2c_client *client;
116 struct input_dev *input;
117 const struct zforce_ts_platdata *pdata;
118 char phys[32];
119
120 struct regulator *reg_vdd;
121
122 struct gpio_desc *gpio_int;
123 struct gpio_desc *gpio_rst;
124
125 bool suspending;
126 bool suspended;
127 bool boot_complete;
128
129 /* Firmware version information */
130 u16 version_major;
131 u16 version_minor;
132 u16 version_build;
133 u16 version_rev;
134
135 struct mutex access_mutex;
136
137 struct completion command_done;
138 struct mutex command_mutex;
139 int command_waiting;
140 int command_result;
141};
142
143static int zforce_command(struct zforce_ts *ts, u8 cmd)
144{
145 struct i2c_client *client = ts->client;
146 char buf[3];
147 int ret;
148
149 dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
150
151 buf[0] = FRAME_START;
152 buf[1] = 1; /* data size, command only */
153 buf[2] = cmd;
154
155 mutex_lock(&ts->access_mutex);
156 ret = i2c_master_send(client, &buf[0], ARRAY_SIZE(buf));
157 mutex_unlock(&ts->access_mutex);
158 if (ret < 0) {
159 dev_err(&client->dev, "i2c send data request error: %d\n", ret);
160 return ret;
161 }
162
163 return 0;
164}
165
166static void zforce_reset_assert(struct zforce_ts *ts)
167{
168 gpiod_set_value_cansleep(ts->gpio_rst, 1);
169}
170
171static void zforce_reset_deassert(struct zforce_ts *ts)
172{
173 gpiod_set_value_cansleep(ts->gpio_rst, 0);
174}
175
176static int zforce_send_wait(struct zforce_ts *ts, const char *buf, int len)
177{
178 struct i2c_client *client = ts->client;
179 int ret;
180
181 ret = mutex_trylock(&ts->command_mutex);
182 if (!ret) {
183 dev_err(&client->dev, "already waiting for a command\n");
184 return -EBUSY;
185 }
186
187 dev_dbg(&client->dev, "sending %d bytes for command 0x%x\n",
188 buf[1], buf[2]);
189
190 ts->command_waiting = buf[2];
191
192 mutex_lock(&ts->access_mutex);
193 ret = i2c_master_send(client, buf, len);
194 mutex_unlock(&ts->access_mutex);
195 if (ret < 0) {
196 dev_err(&client->dev, "i2c send data request error: %d\n", ret);
197 goto unlock;
198 }
199
200 dev_dbg(&client->dev, "waiting for result for command 0x%x\n", buf[2]);
201
202 if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0) {
203 ret = -ETIME;
204 goto unlock;
205 }
206
207 ret = ts->command_result;
208
209unlock:
210 mutex_unlock(&ts->command_mutex);
211 return ret;
212}
213
214static int zforce_command_wait(struct zforce_ts *ts, u8 cmd)
215{
216 struct i2c_client *client = ts->client;
217 char buf[3];
218 int ret;
219
220 dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
221
222 buf[0] = FRAME_START;
223 buf[1] = 1; /* data size, command only */
224 buf[2] = cmd;
225
226 ret = zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
227 if (ret < 0) {
228 dev_err(&client->dev, "i2c send data request error: %d\n", ret);
229 return ret;
230 }
231
232 return 0;
233}
234
235static int zforce_resolution(struct zforce_ts *ts, u16 x, u16 y)
236{
237 struct i2c_client *client = ts->client;
238 char buf[7] = { FRAME_START, 5, COMMAND_RESOLUTION,
239 (x & 0xff), ((x >> 8) & 0xff),
240 (y & 0xff), ((y >> 8) & 0xff) };
241
242 dev_dbg(&client->dev, "set resolution to (%d,%d)\n", x, y);
243
244 return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
245}
246
247static int zforce_scan_frequency(struct zforce_ts *ts, u16 idle, u16 finger,
248 u16 stylus)
249{
250 struct i2c_client *client = ts->client;
251 char buf[9] = { FRAME_START, 7, COMMAND_SCANFREQ,
252 (idle & 0xff), ((idle >> 8) & 0xff),
253 (finger & 0xff), ((finger >> 8) & 0xff),
254 (stylus & 0xff), ((stylus >> 8) & 0xff) };
255
256 dev_dbg(&client->dev,
257 "set scan frequency to (idle: %d, finger: %d, stylus: %d)\n",
258 idle, finger, stylus);
259
260 return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
261}
262
263static int zforce_setconfig(struct zforce_ts *ts, char b1)
264{
265 struct i2c_client *client = ts->client;
266 char buf[7] = { FRAME_START, 5, COMMAND_SETCONFIG,
267 b1, 0, 0, 0 };
268
269 dev_dbg(&client->dev, "set config to (%d)\n", b1);
270
271 return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
272}
273
274static int zforce_start(struct zforce_ts *ts)
275{
276 struct i2c_client *client = ts->client;
277 const struct zforce_ts_platdata *pdata = ts->pdata;
278 int ret;
279
280 dev_dbg(&client->dev, "starting device\n");
281
282 ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
283 if (ret) {
284 dev_err(&client->dev, "Unable to initialize, %d\n", ret);
285 return ret;
286 }
287
288 ret = zforce_resolution(ts, pdata->x_max, pdata->y_max);
289 if (ret) {
290 dev_err(&client->dev, "Unable to set resolution, %d\n", ret);
291 goto error;
292 }
293
294 ret = zforce_scan_frequency(ts, 10, 50, 50);
295 if (ret) {
296 dev_err(&client->dev, "Unable to set scan frequency, %d\n",
297 ret);
298 goto error;
299 }
300
301 ret = zforce_setconfig(ts, SETCONFIG_DUALTOUCH);
302 if (ret) {
303 dev_err(&client->dev, "Unable to set config\n");
304 goto error;
305 }
306
307 /* start sending touch events */
308 ret = zforce_command(ts, COMMAND_DATAREQUEST);
309 if (ret) {
310 dev_err(&client->dev, "Unable to request data\n");
311 goto error;
312 }
313
314 /*
315 * Per NN, initial cal. take max. of 200msec.
316 * Allow time to complete this calibration
317 */
318 msleep(200);
319
320 return 0;
321
322error:
323 zforce_command_wait(ts, COMMAND_DEACTIVATE);
324 return ret;
325}
326
327static int zforce_stop(struct zforce_ts *ts)
328{
329 struct i2c_client *client = ts->client;
330 int ret;
331
332 dev_dbg(&client->dev, "stopping device\n");
333
334 /* Deactivates touch sensing and puts the device into sleep. */
335 ret = zforce_command_wait(ts, COMMAND_DEACTIVATE);
336 if (ret != 0) {
337 dev_err(&client->dev, "could not deactivate device, %d\n",
338 ret);
339 return ret;
340 }
341
342 return 0;
343}
344
345static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
346{
347 struct i2c_client *client = ts->client;
348 const struct zforce_ts_platdata *pdata = ts->pdata;
349 struct zforce_point point;
350 int count, i, num = 0;
351
352 count = payload[0];
353 if (count > ZFORCE_REPORT_POINTS) {
354 dev_warn(&client->dev,
355 "too many coordinates %d, expected max %d\n",
356 count, ZFORCE_REPORT_POINTS);
357 count = ZFORCE_REPORT_POINTS;
358 }
359
360 for (i = 0; i < count; i++) {
361 point.coord_x =
362 payload[9 * i + 2] << 8 | payload[9 * i + 1];
363 point.coord_y =
364 payload[9 * i + 4] << 8 | payload[9 * i + 3];
365
366 if (point.coord_x > pdata->x_max ||
367 point.coord_y > pdata->y_max) {
368 dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
369 point.coord_x, point.coord_y);
370 point.coord_x = point.coord_y = 0;
371 }
372
373 point.state = payload[9 * i + 5] & 0x0f;
374 point.id = (payload[9 * i + 5] & 0xf0) >> 4;
375
376 /* determine touch major, minor and orientation */
377 point.area_major = max(payload[9 * i + 6],
378 payload[9 * i + 7]);
379 point.area_minor = min(payload[9 * i + 6],
380 payload[9 * i + 7]);
381 point.orientation = payload[9 * i + 6] > payload[9 * i + 7];
382
383 point.pressure = payload[9 * i + 8];
384 point.prblty = payload[9 * i + 9];
385
386 dev_dbg(&client->dev,
387 "point %d/%d: state %d, id %d, pressure %d, prblty %d, x %d, y %d, amajor %d, aminor %d, ori %d\n",
388 i, count, point.state, point.id,
389 point.pressure, point.prblty,
390 point.coord_x, point.coord_y,
391 point.area_major, point.area_minor,
392 point.orientation);
393
394 /* the zforce id starts with "1", so needs to be decreased */
395 input_mt_slot(ts->input, point.id - 1);
396
397 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER,
398 point.state != STATE_UP);
399
400 if (point.state != STATE_UP) {
401 input_report_abs(ts->input, ABS_MT_POSITION_X,
402 point.coord_x);
403 input_report_abs(ts->input, ABS_MT_POSITION_Y,
404 point.coord_y);
405 input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
406 point.area_major);
407 input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
408 point.area_minor);
409 input_report_abs(ts->input, ABS_MT_ORIENTATION,
410 point.orientation);
411 num++;
412 }
413 }
414
415 input_mt_sync_frame(ts->input);
416
417 input_mt_report_finger_count(ts->input, num);
418
419 input_sync(ts->input);
420
421 return 0;
422}
423
424static int zforce_read_packet(struct zforce_ts *ts, u8 *buf)
425{
426 struct i2c_client *client = ts->client;
427 int ret;
428
429 mutex_lock(&ts->access_mutex);
430
431 /* read 2 byte message header */
432 ret = i2c_master_recv(client, buf, 2);
433 if (ret < 0) {
434 dev_err(&client->dev, "error reading header: %d\n", ret);
435 goto unlock;
436 }
437
438 if (buf[PAYLOAD_HEADER] != FRAME_START) {
439 dev_err(&client->dev, "invalid frame start: %d\n", buf[0]);
440 ret = -EIO;
441 goto unlock;
442 }
443
444 if (buf[PAYLOAD_LENGTH] == 0) {
445 dev_err(&client->dev, "invalid payload length: %d\n",
446 buf[PAYLOAD_LENGTH]);
447 ret = -EIO;
448 goto unlock;
449 }
450
451 /* read the message */
452 ret = i2c_master_recv(client, &buf[PAYLOAD_BODY], buf[PAYLOAD_LENGTH]);
453 if (ret < 0) {
454 dev_err(&client->dev, "error reading payload: %d\n", ret);
455 goto unlock;
456 }
457
458 dev_dbg(&client->dev, "read %d bytes for response command 0x%x\n",
459 buf[PAYLOAD_LENGTH], buf[PAYLOAD_BODY]);
460
461unlock:
462 mutex_unlock(&ts->access_mutex);
463 return ret;
464}
465
466static void zforce_complete(struct zforce_ts *ts, int cmd, int result)
467{
468 struct i2c_client *client = ts->client;
469
470 if (ts->command_waiting == cmd) {
471 dev_dbg(&client->dev, "completing command 0x%x\n", cmd);
472 ts->command_result = result;
473 complete(&ts->command_done);
474 } else {
475 dev_dbg(&client->dev, "command %d not for us\n", cmd);
476 }
477}
478
479static irqreturn_t zforce_irq(int irq, void *dev_id)
480{
481 struct zforce_ts *ts = dev_id;
482 struct i2c_client *client = ts->client;
483
484 if (ts->suspended && device_may_wakeup(&client->dev))
485 pm_wakeup_event(&client->dev, 500);
486
487 return IRQ_WAKE_THREAD;
488}
489
490static irqreturn_t zforce_irq_thread(int irq, void *dev_id)
491{
492 struct zforce_ts *ts = dev_id;
493 struct i2c_client *client = ts->client;
494 int ret;
495 u8 payload_buffer[FRAME_MAXSIZE];
496 u8 *payload;
497
498 /*
499 * When still suspended, return.
500 * Due to the level-interrupt we will get re-triggered later.
501 */
502 if (ts->suspended) {
503 msleep(20);
504 return IRQ_HANDLED;
505 }
506
507 dev_dbg(&client->dev, "handling interrupt\n");
508
509 /* Don't emit wakeup events from commands run by zforce_suspend */
510 if (!ts->suspending && device_may_wakeup(&client->dev))
511 pm_stay_awake(&client->dev);
512
513 /*
514 * Run at least once and exit the loop if
515 * - the optional interrupt GPIO isn't specified
516 * (there is only one packet read per ISR invocation, then)
517 * or
518 * - the GPIO isn't active any more
519 * (packet read until the level GPIO indicates that there is
520 * no IRQ any more)
521 */
522 do {
523 ret = zforce_read_packet(ts, payload_buffer);
524 if (ret < 0) {
525 dev_err(&client->dev,
526 "could not read packet, ret: %d\n", ret);
527 break;
528 }
529
530 payload = &payload_buffer[PAYLOAD_BODY];
531
532 switch (payload[RESPONSE_ID]) {
533 case NOTIFICATION_TOUCH:
534 /*
535 * Always report touch-events received while
536 * suspending, when being a wakeup source
537 */
538 if (ts->suspending && device_may_wakeup(&client->dev))
539 pm_wakeup_event(&client->dev, 500);
540 zforce_touch_event(ts, &payload[RESPONSE_DATA]);
541 break;
542
543 case NOTIFICATION_BOOTCOMPLETE:
544 ts->boot_complete = payload[RESPONSE_DATA];
545 zforce_complete(ts, payload[RESPONSE_ID], 0);
546 break;
547
548 case RESPONSE_INITIALIZE:
549 case RESPONSE_DEACTIVATE:
550 case RESPONSE_SETCONFIG:
551 case RESPONSE_RESOLUTION:
552 case RESPONSE_SCANFREQ:
553 zforce_complete(ts, payload[RESPONSE_ID],
554 payload[RESPONSE_DATA]);
555 break;
556
557 case RESPONSE_STATUS:
558 /*
559 * Version Payload Results
560 * [2:major] [2:minor] [2:build] [2:rev]
561 */
562 ts->version_major = (payload[RESPONSE_DATA + 1] << 8) |
563 payload[RESPONSE_DATA];
564 ts->version_minor = (payload[RESPONSE_DATA + 3] << 8) |
565 payload[RESPONSE_DATA + 2];
566 ts->version_build = (payload[RESPONSE_DATA + 5] << 8) |
567 payload[RESPONSE_DATA + 4];
568 ts->version_rev = (payload[RESPONSE_DATA + 7] << 8) |
569 payload[RESPONSE_DATA + 6];
570 dev_dbg(&ts->client->dev,
571 "Firmware Version %04x:%04x %04x:%04x\n",
572 ts->version_major, ts->version_minor,
573 ts->version_build, ts->version_rev);
574
575 zforce_complete(ts, payload[RESPONSE_ID], 0);
576 break;
577
578 case NOTIFICATION_INVALID_COMMAND:
579 dev_err(&ts->client->dev, "invalid command: 0x%x\n",
580 payload[RESPONSE_DATA]);
581 break;
582
583 default:
584 dev_err(&ts->client->dev,
585 "unrecognized response id: 0x%x\n",
586 payload[RESPONSE_ID]);
587 break;
588 }
589 } while (gpiod_get_value_cansleep(ts->gpio_int));
590
591 if (!ts->suspending && device_may_wakeup(&client->dev))
592 pm_relax(&client->dev);
593
594 dev_dbg(&client->dev, "finished interrupt\n");
595
596 return IRQ_HANDLED;
597}
598
599static int zforce_input_open(struct input_dev *dev)
600{
601 struct zforce_ts *ts = input_get_drvdata(dev);
602
603 return zforce_start(ts);
604}
605
606static void zforce_input_close(struct input_dev *dev)
607{
608 struct zforce_ts *ts = input_get_drvdata(dev);
609 struct i2c_client *client = ts->client;
610 int ret;
611
612 ret = zforce_stop(ts);
613 if (ret)
614 dev_warn(&client->dev, "stopping zforce failed\n");
615
616 return;
617}
618
619static int __maybe_unused zforce_suspend(struct device *dev)
620{
621 struct i2c_client *client = to_i2c_client(dev);
622 struct zforce_ts *ts = i2c_get_clientdata(client);
623 struct input_dev *input = ts->input;
624 int ret = 0;
625
626 mutex_lock(&input->mutex);
627 ts->suspending = true;
628
629 /*
630 * When configured as a wakeup source device should always wake
631 * the system, therefore start device if necessary.
632 */
633 if (device_may_wakeup(&client->dev)) {
634 dev_dbg(&client->dev, "suspend while being a wakeup source\n");
635
636 /* Need to start device, if not open, to be a wakeup source. */
637 if (!input->users) {
638 ret = zforce_start(ts);
639 if (ret)
640 goto unlock;
641 }
642
643 enable_irq_wake(client->irq);
644 } else if (input->users) {
645 dev_dbg(&client->dev,
646 "suspend without being a wakeup source\n");
647
648 ret = zforce_stop(ts);
649 if (ret)
650 goto unlock;
651
652 disable_irq(client->irq);
653 }
654
655 ts->suspended = true;
656
657unlock:
658 ts->suspending = false;
659 mutex_unlock(&input->mutex);
660
661 return ret;
662}
663
664static int __maybe_unused zforce_resume(struct device *dev)
665{
666 struct i2c_client *client = to_i2c_client(dev);
667 struct zforce_ts *ts = i2c_get_clientdata(client);
668 struct input_dev *input = ts->input;
669 int ret = 0;
670
671 mutex_lock(&input->mutex);
672
673 ts->suspended = false;
674
675 if (device_may_wakeup(&client->dev)) {
676 dev_dbg(&client->dev, "resume from being a wakeup source\n");
677
678 disable_irq_wake(client->irq);
679
680 /* need to stop device if it was not open on suspend */
681 if (!input->users) {
682 ret = zforce_stop(ts);
683 if (ret)
684 goto unlock;
685 }
686 } else if (input->users) {
687 dev_dbg(&client->dev, "resume without being a wakeup source\n");
688
689 enable_irq(client->irq);
690
691 ret = zforce_start(ts);
692 if (ret < 0)
693 goto unlock;
694 }
695
696unlock:
697 mutex_unlock(&input->mutex);
698
699 return ret;
700}
701
702static SIMPLE_DEV_PM_OPS(zforce_pm_ops, zforce_suspend, zforce_resume);
703
704static void zforce_reset(void *data)
705{
706 struct zforce_ts *ts = data;
707
708 zforce_reset_assert(ts);
709
710 udelay(10);
711
712 if (!IS_ERR(ts->reg_vdd))
713 regulator_disable(ts->reg_vdd);
714}
715
716static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev)
717{
718 struct zforce_ts_platdata *pdata;
719 struct device_node *np = dev->of_node;
720
721 if (!np)
722 return ERR_PTR(-ENOENT);
723
724 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
725 if (!pdata) {
726 dev_err(dev, "failed to allocate platform data\n");
727 return ERR_PTR(-ENOMEM);
728 }
729
730 if (of_property_read_u32(np, "x-size", &pdata->x_max)) {
731 dev_err(dev, "failed to get x-size property\n");
732 return ERR_PTR(-EINVAL);
733 }
734
735 if (of_property_read_u32(np, "y-size", &pdata->y_max)) {
736 dev_err(dev, "failed to get y-size property\n");
737 return ERR_PTR(-EINVAL);
738 }
739
740 return pdata;
741}
742
743static int zforce_probe(struct i2c_client *client,
744 const struct i2c_device_id *id)
745{
746 const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
747 struct zforce_ts *ts;
748 struct input_dev *input_dev;
749 int ret;
750
751 if (!pdata) {
752 pdata = zforce_parse_dt(&client->dev);
753 if (IS_ERR(pdata))
754 return PTR_ERR(pdata);
755 }
756
757 ts = devm_kzalloc(&client->dev, sizeof(struct zforce_ts), GFP_KERNEL);
758 if (!ts)
759 return -ENOMEM;
760
761 ts->gpio_rst = devm_gpiod_get_optional(&client->dev, "reset",
762 GPIOD_OUT_HIGH);
763 if (IS_ERR(ts->gpio_rst)) {
764 ret = PTR_ERR(ts->gpio_rst);
765 dev_err(&client->dev,
766 "failed to request reset GPIO: %d\n", ret);
767 return ret;
768 }
769
770 if (ts->gpio_rst) {
771 ts->gpio_int = devm_gpiod_get_optional(&client->dev, "irq",
772 GPIOD_IN);
773 if (IS_ERR(ts->gpio_int)) {
774 ret = PTR_ERR(ts->gpio_int);
775 dev_err(&client->dev,
776 "failed to request interrupt GPIO: %d\n", ret);
777 return ret;
778 }
779 } else {
780 /*
781 * Deprecated GPIO handling for compatibility
782 * with legacy binding.
783 */
784
785 /* INT GPIO */
786 ts->gpio_int = devm_gpiod_get_index(&client->dev, NULL, 0,
787 GPIOD_IN);
788 if (IS_ERR(ts->gpio_int)) {
789 ret = PTR_ERR(ts->gpio_int);
790 dev_err(&client->dev,
791 "failed to request interrupt GPIO: %d\n", ret);
792 return ret;
793 }
794
795 /* RST GPIO */
796 ts->gpio_rst = devm_gpiod_get_index(&client->dev, NULL, 1,
797 GPIOD_OUT_HIGH);
798 if (IS_ERR(ts->gpio_rst)) {
799 ret = PTR_ERR(ts->gpio_rst);
800 dev_err(&client->dev,
801 "failed to request reset GPIO: %d\n", ret);
802 return ret;
803 }
804 }
805
806 ts->reg_vdd = devm_regulator_get_optional(&client->dev, "vdd");
807 if (IS_ERR(ts->reg_vdd)) {
808 ret = PTR_ERR(ts->reg_vdd);
809 if (ret == -EPROBE_DEFER)
810 return ret;
811 } else {
812 ret = regulator_enable(ts->reg_vdd);
813 if (ret)
814 return ret;
815
816 /*
817 * according to datasheet add 100us grace time after regular
818 * regulator enable delay.
819 */
820 udelay(100);
821 }
822
823 ret = devm_add_action(&client->dev, zforce_reset, ts);
824 if (ret) {
825 dev_err(&client->dev, "failed to register reset action, %d\n",
826 ret);
827
828 /* hereafter the regulator will be disabled by the action */
829 if (!IS_ERR(ts->reg_vdd))
830 regulator_disable(ts->reg_vdd);
831
832 return ret;
833 }
834
835 snprintf(ts->phys, sizeof(ts->phys),
836 "%s/input0", dev_name(&client->dev));
837
838 input_dev = devm_input_allocate_device(&client->dev);
839 if (!input_dev) {
840 dev_err(&client->dev, "could not allocate input device\n");
841 return -ENOMEM;
842 }
843
844 mutex_init(&ts->access_mutex);
845 mutex_init(&ts->command_mutex);
846
847 ts->pdata = pdata;
848 ts->client = client;
849 ts->input = input_dev;
850
851 input_dev->name = "Neonode zForce touchscreen";
852 input_dev->phys = ts->phys;
853 input_dev->id.bustype = BUS_I2C;
854
855 input_dev->open = zforce_input_open;
856 input_dev->close = zforce_input_close;
857
858 __set_bit(EV_KEY, input_dev->evbit);
859 __set_bit(EV_SYN, input_dev->evbit);
860 __set_bit(EV_ABS, input_dev->evbit);
861
862 /* For multi touch */
863 input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
864 pdata->x_max, 0, 0);
865 input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
866 pdata->y_max, 0, 0);
867
868 input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
869 ZFORCE_MAX_AREA, 0, 0);
870 input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
871 ZFORCE_MAX_AREA, 0, 0);
872 input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
873 input_mt_init_slots(input_dev, ZFORCE_REPORT_POINTS, INPUT_MT_DIRECT);
874
875 input_set_drvdata(ts->input, ts);
876
877 init_completion(&ts->command_done);
878
879 /*
880 * The zforce pulls the interrupt low when it has data ready.
881 * After it is triggered the isr thread runs until all the available
882 * packets have been read and the interrupt is high again.
883 * Therefore we can trigger the interrupt anytime it is low and do
884 * not need to limit it to the interrupt edge.
885 */
886 ret = devm_request_threaded_irq(&client->dev, client->irq,
887 zforce_irq, zforce_irq_thread,
888 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
889 input_dev->name, ts);
890 if (ret) {
891 dev_err(&client->dev, "irq %d request failed\n", client->irq);
892 return ret;
893 }
894
895 i2c_set_clientdata(client, ts);
896
897 /* let the controller boot */
898 zforce_reset_deassert(ts);
899
900 ts->command_waiting = NOTIFICATION_BOOTCOMPLETE;
901 if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0)
902 dev_warn(&client->dev, "bootcomplete timed out\n");
903
904 /* need to start device to get version information */
905 ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
906 if (ret) {
907 dev_err(&client->dev, "unable to initialize, %d\n", ret);
908 return ret;
909 }
910
911 /* this gets the firmware version among other information */
912 ret = zforce_command_wait(ts, COMMAND_STATUS);
913 if (ret < 0) {
914 dev_err(&client->dev, "couldn't get status, %d\n", ret);
915 zforce_stop(ts);
916 return ret;
917 }
918
919 /* stop device and put it into sleep until it is opened */
920 ret = zforce_stop(ts);
921 if (ret < 0)
922 return ret;
923
924 device_set_wakeup_capable(&client->dev, true);
925
926 ret = input_register_device(input_dev);
927 if (ret) {
928 dev_err(&client->dev, "could not register input device, %d\n",
929 ret);
930 return ret;
931 }
932
933 return 0;
934}
935
936static struct i2c_device_id zforce_idtable[] = {
937 { "zforce-ts", 0 },
938 { }
939};
940MODULE_DEVICE_TABLE(i2c, zforce_idtable);
941
942#ifdef CONFIG_OF
943static const struct of_device_id zforce_dt_idtable[] = {
944 { .compatible = "neonode,zforce" },
945 {},
946};
947MODULE_DEVICE_TABLE(of, zforce_dt_idtable);
948#endif
949
950static struct i2c_driver zforce_driver = {
951 .driver = {
952 .name = "zforce-ts",
953 .pm = &zforce_pm_ops,
954 .of_match_table = of_match_ptr(zforce_dt_idtable),
955 },
956 .probe = zforce_probe,
957 .id_table = zforce_idtable,
958};
959
960module_i2c_driver(zforce_driver);
961
962MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
963MODULE_DESCRIPTION("zForce TouchScreen Driver");
964MODULE_LICENSE("GPL");