Linux Audio

Check our new training course

Loading...
v3.15
  1/*
  2 * ACPI helpers for DMA request / controller
  3 *
  4 * Based on of-dma.c
  5 *
  6 * Copyright (C) 2013, Intel Corporation
  7 * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
  8 *	    Mika Westerberg <mika.westerberg@linux.intel.com>
  9 *
 10 * This program is free software; you can redistribute it and/or modify
 11 * it under the terms of the GNU General Public License version 2 as
 12 * published by the Free Software Foundation.
 13 */
 14
 15#include <linux/device.h>
 16#include <linux/err.h>
 17#include <linux/module.h>
 
 18#include <linux/list.h>
 19#include <linux/mutex.h>
 20#include <linux/slab.h>
 21#include <linux/ioport.h>
 22#include <linux/acpi.h>
 23#include <linux/acpi_dma.h>
 
 24
 25static LIST_HEAD(acpi_dma_list);
 26static DEFINE_MUTEX(acpi_dma_lock);
 27
 28/**
 29 * acpi_dma_parse_resource_group - match device and parse resource group
 30 * @grp:	CSRT resource group
 31 * @adev:	ACPI device to match with
 32 * @adma:	struct acpi_dma of the given DMA controller
 33 *
 34 * In order to match a device from DSDT table to the corresponding CSRT device
 35 * we use MMIO address and IRQ.
 36 *
 37 * Return:
 38 * 1 on success, 0 when no information is available, or appropriate errno value
 39 * on error.
 40 */
 41static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp,
 42		struct acpi_device *adev, struct acpi_dma *adma)
 43{
 44	const struct acpi_csrt_shared_info *si;
 45	struct list_head resource_list;
 46	struct resource_list_entry *rentry;
 47	resource_size_t mem = 0, irq = 0;
 48	int ret;
 49
 50	if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info))
 51		return -ENODEV;
 52
 53	INIT_LIST_HEAD(&resource_list);
 54	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
 55	if (ret <= 0)
 56		return 0;
 57
 58	list_for_each_entry(rentry, &resource_list, node) {
 59		if (resource_type(&rentry->res) == IORESOURCE_MEM)
 60			mem = rentry->res.start;
 61		else if (resource_type(&rentry->res) == IORESOURCE_IRQ)
 62			irq = rentry->res.start;
 63	}
 64
 65	acpi_dev_free_resource_list(&resource_list);
 66
 67	/* Consider initial zero values as resource not found */
 68	if (mem == 0 && irq == 0)
 69		return 0;
 70
 71	si = (const struct acpi_csrt_shared_info *)&grp[1];
 72
 73	/* Match device by MMIO and IRQ */
 74	if (si->mmio_base_low != mem || si->gsi_interrupt != irq)
 
 
 75		return 0;
 76
 77	dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n",
 78		(char *)&grp->vendor_id, grp->device_id, grp->revision);
 79
 80	/* Check if the request line range is available */
 81	if (si->base_request_line == 0 && si->num_handshake_signals == 0)
 82		return 0;
 83
 84	adma->base_request_line = si->base_request_line;
 85	adma->end_request_line = si->base_request_line +
 86				 si->num_handshake_signals - 1;
 87
 88	dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n",
 89		adma->base_request_line, adma->end_request_line);
 90
 91	return 1;
 92}
 93
 94/**
 95 * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources
 96 * @adev:	ACPI device to match with
 97 * @adma:	struct acpi_dma of the given DMA controller
 98 *
 99 * CSRT or Core System Resources Table is a proprietary ACPI table
100 * introduced by Microsoft. This table can contain devices that are not in
101 * the system DSDT table. In particular DMA controllers might be described
102 * here.
103 *
104 * We are using this table to get the request line range of the specific DMA
105 * controller to be used later.
106 */
107static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma)
108{
109	struct acpi_csrt_group *grp, *end;
110	struct acpi_table_csrt *csrt;
111	acpi_status status;
112	int ret;
113
114	status = acpi_get_table(ACPI_SIG_CSRT, 0,
115				(struct acpi_table_header **)&csrt);
116	if (ACPI_FAILURE(status)) {
117		if (status != AE_NOT_FOUND)
118			dev_warn(&adev->dev, "failed to get the CSRT table\n");
119		return;
120	}
121
122	grp = (struct acpi_csrt_group *)(csrt + 1);
123	end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length);
124
125	while (grp < end) {
126		ret = acpi_dma_parse_resource_group(grp, adev, adma);
127		if (ret < 0) {
128			dev_warn(&adev->dev,
129				 "error in parsing resource group\n");
130			return;
131		}
132
133		grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
134	}
135}
136
137/**
138 * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers
139 * @dev:		struct device of DMA controller
140 * @acpi_dma_xlate:	translation function which converts a dma specifier
141 *			into a dma_chan structure
142 * @data		pointer to controller specific data to be used by
143 *			translation function
144 *
145 * Allocated memory should be freed with appropriate acpi_dma_controller_free()
146 * call.
147 *
148 * Return:
149 * 0 on success or appropriate errno value on error.
150 */
151int acpi_dma_controller_register(struct device *dev,
152		struct dma_chan *(*acpi_dma_xlate)
153		(struct acpi_dma_spec *, struct acpi_dma *),
154		void *data)
155{
156	struct acpi_device *adev;
157	struct acpi_dma	*adma;
158
159	if (!dev || !acpi_dma_xlate)
160		return -EINVAL;
161
162	/* Check if the device was enumerated by ACPI */
163	if (!ACPI_HANDLE(dev))
164		return -EINVAL;
165
166	if (acpi_bus_get_device(ACPI_HANDLE(dev), &adev))
167		return -EINVAL;
168
169	adma = kzalloc(sizeof(*adma), GFP_KERNEL);
170	if (!adma)
171		return -ENOMEM;
172
173	adma->dev = dev;
174	adma->acpi_dma_xlate = acpi_dma_xlate;
175	adma->data = data;
176
177	acpi_dma_parse_csrt(adev, adma);
178
179	/* Now queue acpi_dma controller structure in list */
180	mutex_lock(&acpi_dma_lock);
181	list_add_tail(&adma->dma_controllers, &acpi_dma_list);
182	mutex_unlock(&acpi_dma_lock);
183
184	return 0;
185}
186EXPORT_SYMBOL_GPL(acpi_dma_controller_register);
187
188/**
189 * acpi_dma_controller_free - Remove a DMA controller from ACPI DMA helpers list
190 * @dev:	struct device of DMA controller
191 *
192 * Memory allocated by acpi_dma_controller_register() is freed here.
193 *
194 * Return:
195 * 0 on success or appropriate errno value on error.
196 */
197int acpi_dma_controller_free(struct device *dev)
198{
199	struct acpi_dma *adma;
200
201	if (!dev)
202		return -EINVAL;
203
204	mutex_lock(&acpi_dma_lock);
205
206	list_for_each_entry(adma, &acpi_dma_list, dma_controllers)
207		if (adma->dev == dev) {
208			list_del(&adma->dma_controllers);
209			mutex_unlock(&acpi_dma_lock);
210			kfree(adma);
211			return 0;
212		}
213
214	mutex_unlock(&acpi_dma_lock);
215	return -ENODEV;
216}
217EXPORT_SYMBOL_GPL(acpi_dma_controller_free);
218
219static void devm_acpi_dma_release(struct device *dev, void *res)
220{
221	acpi_dma_controller_free(dev);
222}
223
224/**
225 * devm_acpi_dma_controller_register - resource managed acpi_dma_controller_register()
226 * @dev:		device that is registering this DMA controller
227 * @acpi_dma_xlate:	translation function
228 * @data		pointer to controller specific data
229 *
230 * Managed acpi_dma_controller_register(). DMA controller registered by this
231 * function are automatically freed on driver detach. See
232 * acpi_dma_controller_register() for more information.
233 *
234 * Return:
235 * 0 on success or appropriate errno value on error.
236 */
237int devm_acpi_dma_controller_register(struct device *dev,
238		struct dma_chan *(*acpi_dma_xlate)
239		(struct acpi_dma_spec *, struct acpi_dma *),
240		void *data)
241{
242	void *res;
243	int ret;
244
245	res = devres_alloc(devm_acpi_dma_release, 0, GFP_KERNEL);
246	if (!res)
247		return -ENOMEM;
248
249	ret = acpi_dma_controller_register(dev, acpi_dma_xlate, data);
250	if (ret) {
251		devres_free(res);
252		return ret;
253	}
254	devres_add(dev, res);
255	return 0;
256}
257EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_register);
258
259/**
260 * devm_acpi_dma_controller_free - resource managed acpi_dma_controller_free()
261 *
262 * Unregister a DMA controller registered with
263 * devm_acpi_dma_controller_register(). Normally this function will not need to
264 * be called and the resource management code will ensure that the resource is
265 * freed.
266 */
267void devm_acpi_dma_controller_free(struct device *dev)
268{
269	WARN_ON(devres_release(dev, devm_acpi_dma_release, NULL, NULL));
270}
271EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free);
272
273/**
274 * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function
275 * @adma:	struct acpi_dma of DMA controller
276 * @dma_spec:	dma specifier to update
277 *
278 * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource
279 * Descriptor":
280 *	DMA Request Line bits is a platform-relative number uniquely
281 *	identifying the request line assigned. Request line-to-Controller
282 *	mapping is done in a controller-specific OS driver.
283 * That's why we can safely adjust slave_id when the appropriate controller is
284 * found.
285 *
286 * Return:
287 * 0, if no information is avaiable, -1 on mismatch, and 1 otherwise.
288 */
289static int acpi_dma_update_dma_spec(struct acpi_dma *adma,
290		struct acpi_dma_spec *dma_spec)
291{
292	/* Set link to the DMA controller device */
293	dma_spec->dev = adma->dev;
294
295	/* Check if the request line range is available */
296	if (adma->base_request_line == 0 && adma->end_request_line == 0)
297		return 0;
298
299	/* Check if slave_id falls to the range */
300	if (dma_spec->slave_id < adma->base_request_line ||
301	    dma_spec->slave_id > adma->end_request_line)
302		return -1;
303
304	/*
305	 * Here we adjust slave_id. It should be a relative number to the base
306	 * request line.
307	 */
308	dma_spec->slave_id -= adma->base_request_line;
309
310	return 1;
311}
312
313struct acpi_dma_parser_data {
314	struct acpi_dma_spec dma_spec;
315	size_t index;
316	size_t n;
317};
318
319/**
320 * acpi_dma_parse_fixed_dma - Parse FixedDMA ACPI resources to a DMA specifier
321 * @res:	struct acpi_resource to get FixedDMA resources from
322 * @data:	pointer to a helper struct acpi_dma_parser_data
323 */
324static int acpi_dma_parse_fixed_dma(struct acpi_resource *res, void *data)
325{
326	struct acpi_dma_parser_data *pdata = data;
327
328	if (res->type == ACPI_RESOURCE_TYPE_FIXED_DMA) {
329		struct acpi_resource_fixed_dma *dma = &res->data.fixed_dma;
330
331		if (pdata->n++ == pdata->index) {
332			pdata->dma_spec.chan_id = dma->channels;
333			pdata->dma_spec.slave_id = dma->request_lines;
334		}
335	}
336
337	/* Tell the ACPI core to skip this resource */
338	return 1;
339}
340
341/**
342 * acpi_dma_request_slave_chan_by_index - Get the DMA slave channel
343 * @dev:	struct device to get DMA request from
344 * @index:	index of FixedDMA descriptor for @dev
345 *
346 * Return:
347 * Pointer to appropriate dma channel on success or an error pointer.
348 */
349struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev,
350		size_t index)
351{
352	struct acpi_dma_parser_data pdata;
353	struct acpi_dma_spec *dma_spec = &pdata.dma_spec;
354	struct list_head resource_list;
355	struct acpi_device *adev;
356	struct acpi_dma *adma;
357	struct dma_chan *chan = NULL;
358	int found;
359
360	/* Check if the device was enumerated by ACPI */
361	if (!dev || !ACPI_HANDLE(dev))
362		return ERR_PTR(-ENODEV);
363
364	if (acpi_bus_get_device(ACPI_HANDLE(dev), &adev))
 
365		return ERR_PTR(-ENODEV);
366
367	memset(&pdata, 0, sizeof(pdata));
368	pdata.index = index;
369
370	/* Initial values for the request line and channel */
371	dma_spec->chan_id = -1;
372	dma_spec->slave_id = -1;
373
374	INIT_LIST_HEAD(&resource_list);
375	acpi_dev_get_resources(adev, &resource_list,
376			acpi_dma_parse_fixed_dma, &pdata);
377	acpi_dev_free_resource_list(&resource_list);
378
379	if (dma_spec->slave_id < 0 || dma_spec->chan_id < 0)
380		return ERR_PTR(-ENODEV);
381
382	mutex_lock(&acpi_dma_lock);
383
384	list_for_each_entry(adma, &acpi_dma_list, dma_controllers) {
385		/*
386		 * We are not going to call translation function if slave_id
387		 * doesn't fall to the request range.
388		 */
389		found = acpi_dma_update_dma_spec(adma, dma_spec);
390		if (found < 0)
391			continue;
392		chan = adma->acpi_dma_xlate(dma_spec, adma);
393		/*
394		 * Try to get a channel only from the DMA controller that
395		 * matches the slave_id. See acpi_dma_update_dma_spec()
396		 * description for the details.
397		 */
398		if (found > 0 || chan)
399			break;
400	}
401
402	mutex_unlock(&acpi_dma_lock);
403	return chan ? chan : ERR_PTR(-EPROBE_DEFER);
404}
405EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_index);
406
407/**
408 * acpi_dma_request_slave_chan_by_name - Get the DMA slave channel
409 * @dev:	struct device to get DMA request from
410 * @name:	represents corresponding FixedDMA descriptor for @dev
411 *
412 * In order to support both Device Tree and ACPI in a single driver we
413 * translate the names "tx" and "rx" here based on the most common case where
414 * the first FixedDMA descriptor is TX and second is RX.
415 *
 
 
 
 
416 * Return:
417 * Pointer to appropriate dma channel on success or an error pointer.
418 */
419struct dma_chan *acpi_dma_request_slave_chan_by_name(struct device *dev,
420		const char *name)
421{
422	size_t index;
423
424	if (!strcmp(name, "tx"))
425		index = 0;
426	else if (!strcmp(name, "rx"))
427		index = 1;
428	else
429		return ERR_PTR(-ENODEV);
 
 
 
430
 
431	return acpi_dma_request_slave_chan_by_index(dev, index);
432}
433EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_name);
434
435/**
436 * acpi_dma_simple_xlate - Simple ACPI DMA engine translation helper
437 * @dma_spec: pointer to ACPI DMA specifier
438 * @adma: pointer to ACPI DMA controller data
439 *
440 * A simple translation function for ACPI based devices. Passes &struct
441 * dma_spec to the DMA controller driver provided filter function.
442 *
443 * Return:
444 * Pointer to the channel if found or %NULL otherwise.
445 */
446struct dma_chan *acpi_dma_simple_xlate(struct acpi_dma_spec *dma_spec,
447		struct acpi_dma *adma)
448{
449	struct acpi_dma_filter_info *info = adma->data;
450
451	if (!info || !info->filter_fn)
452		return NULL;
453
454	return dma_request_channel(info->dma_cap, info->filter_fn, dma_spec);
455}
456EXPORT_SYMBOL_GPL(acpi_dma_simple_xlate);
v4.17
  1/*
  2 * ACPI helpers for DMA request / controller
  3 *
  4 * Based on of-dma.c
  5 *
  6 * Copyright (C) 2013, Intel Corporation
  7 * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
  8 *	    Mika Westerberg <mika.westerberg@linux.intel.com>
  9 *
 10 * This program is free software; you can redistribute it and/or modify
 11 * it under the terms of the GNU General Public License version 2 as
 12 * published by the Free Software Foundation.
 13 */
 14
 15#include <linux/device.h>
 16#include <linux/err.h>
 17#include <linux/module.h>
 18#include <linux/kernel.h>
 19#include <linux/list.h>
 20#include <linux/mutex.h>
 21#include <linux/slab.h>
 22#include <linux/ioport.h>
 23#include <linux/acpi.h>
 24#include <linux/acpi_dma.h>
 25#include <linux/property.h>
 26
 27static LIST_HEAD(acpi_dma_list);
 28static DEFINE_MUTEX(acpi_dma_lock);
 29
 30/**
 31 * acpi_dma_parse_resource_group - match device and parse resource group
 32 * @grp:	CSRT resource group
 33 * @adev:	ACPI device to match with
 34 * @adma:	struct acpi_dma of the given DMA controller
 35 *
 36 * In order to match a device from DSDT table to the corresponding CSRT device
 37 * we use MMIO address and IRQ.
 38 *
 39 * Return:
 40 * 1 on success, 0 when no information is available, or appropriate errno value
 41 * on error.
 42 */
 43static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp,
 44		struct acpi_device *adev, struct acpi_dma *adma)
 45{
 46	const struct acpi_csrt_shared_info *si;
 47	struct list_head resource_list;
 48	struct resource_entry *rentry;
 49	resource_size_t mem = 0, irq = 0;
 50	int ret;
 51
 52	if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info))
 53		return -ENODEV;
 54
 55	INIT_LIST_HEAD(&resource_list);
 56	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
 57	if (ret <= 0)
 58		return 0;
 59
 60	list_for_each_entry(rentry, &resource_list, node) {
 61		if (resource_type(rentry->res) == IORESOURCE_MEM)
 62			mem = rentry->res->start;
 63		else if (resource_type(rentry->res) == IORESOURCE_IRQ)
 64			irq = rentry->res->start;
 65	}
 66
 67	acpi_dev_free_resource_list(&resource_list);
 68
 69	/* Consider initial zero values as resource not found */
 70	if (mem == 0 && irq == 0)
 71		return 0;
 72
 73	si = (const struct acpi_csrt_shared_info *)&grp[1];
 74
 75	/* Match device by MMIO and IRQ */
 76	if (si->mmio_base_low != lower_32_bits(mem) ||
 77	    si->mmio_base_high != upper_32_bits(mem) ||
 78	    si->gsi_interrupt != irq)
 79		return 0;
 80
 81	dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n",
 82		(char *)&grp->vendor_id, grp->device_id, grp->revision);
 83
 84	/* Check if the request line range is available */
 85	if (si->base_request_line == 0 && si->num_handshake_signals == 0)
 86		return 0;
 87
 88	adma->base_request_line = si->base_request_line;
 89	adma->end_request_line = si->base_request_line +
 90				 si->num_handshake_signals - 1;
 91
 92	dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n",
 93		adma->base_request_line, adma->end_request_line);
 94
 95	return 1;
 96}
 97
 98/**
 99 * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources
100 * @adev:	ACPI device to match with
101 * @adma:	struct acpi_dma of the given DMA controller
102 *
103 * CSRT or Core System Resources Table is a proprietary ACPI table
104 * introduced by Microsoft. This table can contain devices that are not in
105 * the system DSDT table. In particular DMA controllers might be described
106 * here.
107 *
108 * We are using this table to get the request line range of the specific DMA
109 * controller to be used later.
110 */
111static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma)
112{
113	struct acpi_csrt_group *grp, *end;
114	struct acpi_table_csrt *csrt;
115	acpi_status status;
116	int ret;
117
118	status = acpi_get_table(ACPI_SIG_CSRT, 0,
119				(struct acpi_table_header **)&csrt);
120	if (ACPI_FAILURE(status)) {
121		if (status != AE_NOT_FOUND)
122			dev_warn(&adev->dev, "failed to get the CSRT table\n");
123		return;
124	}
125
126	grp = (struct acpi_csrt_group *)(csrt + 1);
127	end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length);
128
129	while (grp < end) {
130		ret = acpi_dma_parse_resource_group(grp, adev, adma);
131		if (ret < 0) {
132			dev_warn(&adev->dev,
133				 "error in parsing resource group\n");
134			return;
135		}
136
137		grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
138	}
139}
140
141/**
142 * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers
143 * @dev:		struct device of DMA controller
144 * @acpi_dma_xlate:	translation function which converts a dma specifier
145 *			into a dma_chan structure
146 * @data		pointer to controller specific data to be used by
147 *			translation function
148 *
149 * Allocated memory should be freed with appropriate acpi_dma_controller_free()
150 * call.
151 *
152 * Return:
153 * 0 on success or appropriate errno value on error.
154 */
155int acpi_dma_controller_register(struct device *dev,
156		struct dma_chan *(*acpi_dma_xlate)
157		(struct acpi_dma_spec *, struct acpi_dma *),
158		void *data)
159{
160	struct acpi_device *adev;
161	struct acpi_dma	*adma;
162
163	if (!dev || !acpi_dma_xlate)
164		return -EINVAL;
165
166	/* Check if the device was enumerated by ACPI */
167	adev = ACPI_COMPANION(dev);
168	if (!adev)
 
 
169		return -EINVAL;
170
171	adma = kzalloc(sizeof(*adma), GFP_KERNEL);
172	if (!adma)
173		return -ENOMEM;
174
175	adma->dev = dev;
176	adma->acpi_dma_xlate = acpi_dma_xlate;
177	adma->data = data;
178
179	acpi_dma_parse_csrt(adev, adma);
180
181	/* Now queue acpi_dma controller structure in list */
182	mutex_lock(&acpi_dma_lock);
183	list_add_tail(&adma->dma_controllers, &acpi_dma_list);
184	mutex_unlock(&acpi_dma_lock);
185
186	return 0;
187}
188EXPORT_SYMBOL_GPL(acpi_dma_controller_register);
189
190/**
191 * acpi_dma_controller_free - Remove a DMA controller from ACPI DMA helpers list
192 * @dev:	struct device of DMA controller
193 *
194 * Memory allocated by acpi_dma_controller_register() is freed here.
195 *
196 * Return:
197 * 0 on success or appropriate errno value on error.
198 */
199int acpi_dma_controller_free(struct device *dev)
200{
201	struct acpi_dma *adma;
202
203	if (!dev)
204		return -EINVAL;
205
206	mutex_lock(&acpi_dma_lock);
207
208	list_for_each_entry(adma, &acpi_dma_list, dma_controllers)
209		if (adma->dev == dev) {
210			list_del(&adma->dma_controllers);
211			mutex_unlock(&acpi_dma_lock);
212			kfree(adma);
213			return 0;
214		}
215
216	mutex_unlock(&acpi_dma_lock);
217	return -ENODEV;
218}
219EXPORT_SYMBOL_GPL(acpi_dma_controller_free);
220
221static void devm_acpi_dma_release(struct device *dev, void *res)
222{
223	acpi_dma_controller_free(dev);
224}
225
226/**
227 * devm_acpi_dma_controller_register - resource managed acpi_dma_controller_register()
228 * @dev:		device that is registering this DMA controller
229 * @acpi_dma_xlate:	translation function
230 * @data		pointer to controller specific data
231 *
232 * Managed acpi_dma_controller_register(). DMA controller registered by this
233 * function are automatically freed on driver detach. See
234 * acpi_dma_controller_register() for more information.
235 *
236 * Return:
237 * 0 on success or appropriate errno value on error.
238 */
239int devm_acpi_dma_controller_register(struct device *dev,
240		struct dma_chan *(*acpi_dma_xlate)
241		(struct acpi_dma_spec *, struct acpi_dma *),
242		void *data)
243{
244	void *res;
245	int ret;
246
247	res = devres_alloc(devm_acpi_dma_release, 0, GFP_KERNEL);
248	if (!res)
249		return -ENOMEM;
250
251	ret = acpi_dma_controller_register(dev, acpi_dma_xlate, data);
252	if (ret) {
253		devres_free(res);
254		return ret;
255	}
256	devres_add(dev, res);
257	return 0;
258}
259EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_register);
260
261/**
262 * devm_acpi_dma_controller_free - resource managed acpi_dma_controller_free()
263 *
264 * Unregister a DMA controller registered with
265 * devm_acpi_dma_controller_register(). Normally this function will not need to
266 * be called and the resource management code will ensure that the resource is
267 * freed.
268 */
269void devm_acpi_dma_controller_free(struct device *dev)
270{
271	WARN_ON(devres_release(dev, devm_acpi_dma_release, NULL, NULL));
272}
273EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free);
274
275/**
276 * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function
277 * @adma:	struct acpi_dma of DMA controller
278 * @dma_spec:	dma specifier to update
279 *
280 * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource
281 * Descriptor":
282 *	DMA Request Line bits is a platform-relative number uniquely
283 *	identifying the request line assigned. Request line-to-Controller
284 *	mapping is done in a controller-specific OS driver.
285 * That's why we can safely adjust slave_id when the appropriate controller is
286 * found.
287 *
288 * Return:
289 * 0, if no information is avaiable, -1 on mismatch, and 1 otherwise.
290 */
291static int acpi_dma_update_dma_spec(struct acpi_dma *adma,
292		struct acpi_dma_spec *dma_spec)
293{
294	/* Set link to the DMA controller device */
295	dma_spec->dev = adma->dev;
296
297	/* Check if the request line range is available */
298	if (adma->base_request_line == 0 && adma->end_request_line == 0)
299		return 0;
300
301	/* Check if slave_id falls to the range */
302	if (dma_spec->slave_id < adma->base_request_line ||
303	    dma_spec->slave_id > adma->end_request_line)
304		return -1;
305
306	/*
307	 * Here we adjust slave_id. It should be a relative number to the base
308	 * request line.
309	 */
310	dma_spec->slave_id -= adma->base_request_line;
311
312	return 1;
313}
314
315struct acpi_dma_parser_data {
316	struct acpi_dma_spec dma_spec;
317	size_t index;
318	size_t n;
319};
320
321/**
322 * acpi_dma_parse_fixed_dma - Parse FixedDMA ACPI resources to a DMA specifier
323 * @res:	struct acpi_resource to get FixedDMA resources from
324 * @data:	pointer to a helper struct acpi_dma_parser_data
325 */
326static int acpi_dma_parse_fixed_dma(struct acpi_resource *res, void *data)
327{
328	struct acpi_dma_parser_data *pdata = data;
329
330	if (res->type == ACPI_RESOURCE_TYPE_FIXED_DMA) {
331		struct acpi_resource_fixed_dma *dma = &res->data.fixed_dma;
332
333		if (pdata->n++ == pdata->index) {
334			pdata->dma_spec.chan_id = dma->channels;
335			pdata->dma_spec.slave_id = dma->request_lines;
336		}
337	}
338
339	/* Tell the ACPI core to skip this resource */
340	return 1;
341}
342
343/**
344 * acpi_dma_request_slave_chan_by_index - Get the DMA slave channel
345 * @dev:	struct device to get DMA request from
346 * @index:	index of FixedDMA descriptor for @dev
347 *
348 * Return:
349 * Pointer to appropriate dma channel on success or an error pointer.
350 */
351struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev,
352		size_t index)
353{
354	struct acpi_dma_parser_data pdata;
355	struct acpi_dma_spec *dma_spec = &pdata.dma_spec;
356	struct list_head resource_list;
357	struct acpi_device *adev;
358	struct acpi_dma *adma;
359	struct dma_chan *chan = NULL;
360	int found;
361
362	/* Check if the device was enumerated by ACPI */
363	if (!dev)
364		return ERR_PTR(-ENODEV);
365
366	adev = ACPI_COMPANION(dev);
367	if (!adev)
368		return ERR_PTR(-ENODEV);
369
370	memset(&pdata, 0, sizeof(pdata));
371	pdata.index = index;
372
373	/* Initial values for the request line and channel */
374	dma_spec->chan_id = -1;
375	dma_spec->slave_id = -1;
376
377	INIT_LIST_HEAD(&resource_list);
378	acpi_dev_get_resources(adev, &resource_list,
379			acpi_dma_parse_fixed_dma, &pdata);
380	acpi_dev_free_resource_list(&resource_list);
381
382	if (dma_spec->slave_id < 0 || dma_spec->chan_id < 0)
383		return ERR_PTR(-ENODEV);
384
385	mutex_lock(&acpi_dma_lock);
386
387	list_for_each_entry(adma, &acpi_dma_list, dma_controllers) {
388		/*
389		 * We are not going to call translation function if slave_id
390		 * doesn't fall to the request range.
391		 */
392		found = acpi_dma_update_dma_spec(adma, dma_spec);
393		if (found < 0)
394			continue;
395		chan = adma->acpi_dma_xlate(dma_spec, adma);
396		/*
397		 * Try to get a channel only from the DMA controller that
398		 * matches the slave_id. See acpi_dma_update_dma_spec()
399		 * description for the details.
400		 */
401		if (found > 0 || chan)
402			break;
403	}
404
405	mutex_unlock(&acpi_dma_lock);
406	return chan ? chan : ERR_PTR(-EPROBE_DEFER);
407}
408EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_index);
409
410/**
411 * acpi_dma_request_slave_chan_by_name - Get the DMA slave channel
412 * @dev:	struct device to get DMA request from
413 * @name:	represents corresponding FixedDMA descriptor for @dev
414 *
415 * In order to support both Device Tree and ACPI in a single driver we
416 * translate the names "tx" and "rx" here based on the most common case where
417 * the first FixedDMA descriptor is TX and second is RX.
418 *
419 * If the device has "dma-names" property the FixedDMA descriptor indices
420 * are retrieved based on those. Otherwise the function falls back using
421 * hardcoded indices.
422 *
423 * Return:
424 * Pointer to appropriate dma channel on success or an error pointer.
425 */
426struct dma_chan *acpi_dma_request_slave_chan_by_name(struct device *dev,
427		const char *name)
428{
429	int index;
430
431	index = device_property_match_string(dev, "dma-names", name);
432	if (index < 0) {
433		if (!strcmp(name, "tx"))
434			index = 0;
435		else if (!strcmp(name, "rx"))
436			index = 1;
437		else
438			return ERR_PTR(-ENODEV);
439	}
440
441	dev_dbg(dev, "Looking for DMA channel \"%s\" at index %d...\n", name, index);
442	return acpi_dma_request_slave_chan_by_index(dev, index);
443}
444EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_name);
445
446/**
447 * acpi_dma_simple_xlate - Simple ACPI DMA engine translation helper
448 * @dma_spec: pointer to ACPI DMA specifier
449 * @adma: pointer to ACPI DMA controller data
450 *
451 * A simple translation function for ACPI based devices. Passes &struct
452 * dma_spec to the DMA controller driver provided filter function.
453 *
454 * Return:
455 * Pointer to the channel if found or %NULL otherwise.
456 */
457struct dma_chan *acpi_dma_simple_xlate(struct acpi_dma_spec *dma_spec,
458		struct acpi_dma *adma)
459{
460	struct acpi_dma_filter_info *info = adma->data;
461
462	if (!info || !info->filter_fn)
463		return NULL;
464
465	return dma_request_channel(info->dma_cap, info->filter_fn, dma_spec);
466}
467EXPORT_SYMBOL_GPL(acpi_dma_simple_xlate);