Loading...
1#
2# arch/x86/boot/Makefile
3#
4# This file is subject to the terms and conditions of the GNU General Public
5# License. See the file "COPYING" in the main directory of this archive
6# for more details.
7#
8# Copyright (C) 1994 by Linus Torvalds
9# Changed by many, many contributors over the years.
10#
11
12# If you want to preset the SVGA mode, uncomment the next line and
13# set SVGA_MODE to whatever number you want.
14# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
15# The number is the same as you would ordinarily press at bootup.
16
17SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
18
19targets := vmlinux.bin setup.bin setup.elf bzImage
20targets += fdimage fdimage144 fdimage288 image.iso mtools.conf
21subdir- := compressed
22
23setup-y += a20.o bioscall.o cmdline.o copy.o cpu.o cpuflags.o cpucheck.o
24setup-y += early_serial_console.o edd.o header.o main.o mca.o memory.o
25setup-y += pm.o pmjump.o printf.o regs.o string.o tty.o video.o
26setup-y += video-mode.o version.o
27setup-$(CONFIG_X86_APM_BOOT) += apm.o
28
29# The link order of the video-*.o modules can matter. In particular,
30# video-vga.o *must* be listed first, followed by video-vesa.o.
31# Hardware-specific drivers should follow in the order they should be
32# probed, and video-bios.o should typically be last.
33setup-y += video-vga.o
34setup-y += video-vesa.o
35setup-y += video-bios.o
36
37targets += $(setup-y)
38hostprogs-y := mkcpustr tools/build
39
40HOST_EXTRACFLAGS += -I$(srctree)/tools/include \
41 -include include/generated/autoconf.h \
42 -D__EXPORTED_HEADERS__
43
44$(obj)/cpu.o: $(obj)/cpustr.h
45
46quiet_cmd_cpustr = CPUSTR $@
47 cmd_cpustr = $(obj)/mkcpustr > $@
48targets += cpustr.h
49$(obj)/cpustr.h: $(obj)/mkcpustr FORCE
50 $(call if_changed,cpustr)
51
52# ---------------------------------------------------------------------------
53
54KBUILD_CFLAGS := $(USERINCLUDE) $(REALMODE_CFLAGS) -D_SETUP
55KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
56GCOV_PROFILE := n
57
58$(obj)/bzImage: asflags-y := $(SVGA_MODE)
59
60quiet_cmd_image = BUILD $@
61cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
62 $(obj)/zoffset.h $@
63
64$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
65 $(call if_changed,image)
66 @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
67
68OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
69$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
70 $(call if_changed,objcopy)
71
72SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
73
74sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(_text\|_end\)$$/\#define VO_\2 0x\1/p'
75
76quiet_cmd_voffset = VOFFSET $@
77 cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
78
79targets += voffset.h
80$(obj)/voffset.h: vmlinux FORCE
81 $(call if_changed,voffset)
82
83sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
84
85quiet_cmd_zoffset = ZOFFSET $@
86 cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
87
88targets += zoffset.h
89$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
90 $(call if_changed,zoffset)
91
92
93AFLAGS_header.o += -I$(obj)
94$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h
95
96LDFLAGS_setup.elf := -T
97$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
98 $(call if_changed,ld)
99
100OBJCOPYFLAGS_setup.bin := -O binary
101$(obj)/setup.bin: $(obj)/setup.elf FORCE
102 $(call if_changed,objcopy)
103
104$(obj)/compressed/vmlinux: FORCE
105 $(Q)$(MAKE) $(build)=$(obj)/compressed $@
106
107# Set this if you want to pass append arguments to the
108# bzdisk/fdimage/isoimage kernel
109FDARGS =
110# Set this if you want an initrd included with the
111# bzdisk/fdimage/isoimage kernel
112FDINITRD =
113
114image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
115
116$(obj)/mtools.conf: $(src)/mtools.conf.in
117 sed -e 's|@OBJ@|$(obj)|g' < $< > $@
118
119# This requires write access to /dev/fd0
120bzdisk: $(obj)/bzImage $(obj)/mtools.conf
121 MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
122 syslinux /dev/fd0 ; sync
123 echo '$(image_cmdline)' | \
124 MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
125 if [ -f '$(FDINITRD)' ] ; then \
126 MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
127 fi
128 MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage a:linux ; sync
129
130# These require being root or having syslinux 2.02 or higher installed
131fdimage fdimage144: $(obj)/bzImage $(obj)/mtools.conf
132 dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
133 MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
134 syslinux $(obj)/fdimage ; sync
135 echo '$(image_cmdline)' | \
136 MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
137 if [ -f '$(FDINITRD)' ] ; then \
138 MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
139 fi
140 MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage v:linux ; sync
141
142fdimage288: $(obj)/bzImage $(obj)/mtools.conf
143 dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
144 MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
145 syslinux $(obj)/fdimage ; sync
146 echo '$(image_cmdline)' | \
147 MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
148 if [ -f '$(FDINITRD)' ] ; then \
149 MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
150 fi
151 MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage w:linux ; sync
152
153isoimage: $(obj)/bzImage
154 -rm -rf $(obj)/isoimage
155 mkdir $(obj)/isoimage
156 for i in lib lib64 share end ; do \
157 if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
158 cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
159 break ; \
160 fi ; \
161 if [ $$i = end ] ; then exit 1 ; fi ; \
162 done
163 cp $(obj)/bzImage $(obj)/isoimage/linux
164 echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
165 if [ -f '$(FDINITRD)' ] ; then \
166 cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
167 fi
168 mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
169 -no-emul-boot -boot-load-size 4 -boot-info-table \
170 $(obj)/isoimage
171 isohybrid $(obj)/image.iso 2>/dev/null || true
172 rm -rf $(obj)/isoimage
173
174bzlilo: $(obj)/bzImage
175 if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
176 if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
177 cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz
178 cp System.map $(INSTALL_PATH)/
179 if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
180
181install:
182 sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(obj)/bzImage \
183 System.map "$(INSTALL_PATH)"
1#
2# arch/x86/boot/Makefile
3#
4# This file is subject to the terms and conditions of the GNU General Public
5# License. See the file "COPYING" in the main directory of this archive
6# for more details.
7#
8# Copyright (C) 1994 by Linus Torvalds
9# Changed by many, many contributors over the years.
10#
11
12KASAN_SANITIZE := n
13OBJECT_FILES_NON_STANDARD := y
14
15# Kernel does not boot with kcov instrumentation here.
16# One of the problems observed was insertion of __sanitizer_cov_trace_pc()
17# callback into middle of per-cpu data enabling code. Thus the callback observed
18# inconsistent state and crashed. We are interested mostly in syscall coverage,
19# so boot code is not interesting anyway.
20KCOV_INSTRUMENT := n
21
22# If you want to preset the SVGA mode, uncomment the next line and
23# set SVGA_MODE to whatever number you want.
24# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
25# The number is the same as you would ordinarily press at bootup.
26
27SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
28
29targets := vmlinux.bin setup.bin setup.elf bzImage
30targets += fdimage fdimage144 fdimage288 image.iso mtools.conf
31subdir- := compressed
32
33setup-y += a20.o bioscall.o cmdline.o copy.o cpu.o cpuflags.o cpucheck.o
34setup-y += early_serial_console.o edd.o header.o main.o memory.o
35setup-y += pm.o pmjump.o printf.o regs.o string.o tty.o video.o
36setup-y += video-mode.o version.o
37setup-$(CONFIG_X86_APM_BOOT) += apm.o
38
39# The link order of the video-*.o modules can matter. In particular,
40# video-vga.o *must* be listed first, followed by video-vesa.o.
41# Hardware-specific drivers should follow in the order they should be
42# probed, and video-bios.o should typically be last.
43setup-y += video-vga.o
44setup-y += video-vesa.o
45setup-y += video-bios.o
46
47targets += $(setup-y)
48hostprogs-y := tools/build
49hostprogs-$(CONFIG_X86_FEATURE_NAMES) += mkcpustr
50
51HOST_EXTRACFLAGS += -I$(srctree)/tools/include \
52 -include include/generated/autoconf.h \
53 -D__EXPORTED_HEADERS__
54
55ifdef CONFIG_X86_FEATURE_NAMES
56$(obj)/cpu.o: $(obj)/cpustr.h
57
58quiet_cmd_cpustr = CPUSTR $@
59 cmd_cpustr = $(obj)/mkcpustr > $@
60targets += cpustr.h
61$(obj)/cpustr.h: $(obj)/mkcpustr FORCE
62 $(call if_changed,cpustr)
63endif
64clean-files += cpustr.h
65
66# ---------------------------------------------------------------------------
67
68KBUILD_CFLAGS := $(REALMODE_CFLAGS) -D_SETUP
69KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
70GCOV_PROFILE := n
71UBSAN_SANITIZE := n
72
73$(obj)/bzImage: asflags-y := $(SVGA_MODE)
74
75quiet_cmd_image = BUILD $@
76silent_redirect_image = >/dev/null
77cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
78 $(obj)/zoffset.h $@ $($(quiet)redirect_image)
79
80$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
81 $(call if_changed,image)
82 @$(kecho) 'Kernel: $@ is ready' ' (#'`cat .version`')'
83
84OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
85$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
86 $(call if_changed,objcopy)
87
88SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
89
90sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|_ehead\|_text\|z_.*\)$$/\#define ZO_\2 0x\1/p'
91
92quiet_cmd_zoffset = ZOFFSET $@
93 cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
94
95targets += zoffset.h
96$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
97 $(call if_changed,zoffset)
98
99
100AFLAGS_header.o += -I$(objtree)/$(obj)
101$(obj)/header.o: $(obj)/zoffset.h
102
103LDFLAGS_setup.elf := -T
104$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
105 $(call if_changed,ld)
106
107OBJCOPYFLAGS_setup.bin := -O binary
108$(obj)/setup.bin: $(obj)/setup.elf FORCE
109 $(call if_changed,objcopy)
110
111$(obj)/compressed/vmlinux: FORCE
112 $(Q)$(MAKE) $(build)=$(obj)/compressed $@
113
114# Set this if you want to pass append arguments to the
115# bzdisk/fdimage/isoimage kernel
116FDARGS =
117# Set this if you want an initrd included with the
118# bzdisk/fdimage/isoimage kernel
119FDINITRD =
120
121image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
122
123$(obj)/mtools.conf: $(src)/mtools.conf.in
124 sed -e 's|@OBJ@|$(obj)|g' < $< > $@
125
126quiet_cmd_genimage = GENIMAGE $3
127cmd_genimage = sh $(srctree)/$(src)/genimage.sh $2 $3 $(obj)/bzImage \
128 $(obj)/mtools.conf '$(image_cmdline)' $(FDINITRD)
129
130# This requires write access to /dev/fd0
131bzdisk: $(obj)/bzImage $(obj)/mtools.conf
132 $(call cmd,genimage,bzdisk,/dev/fd0)
133
134# These require being root or having syslinux 2.02 or higher installed
135fdimage fdimage144: $(obj)/bzImage $(obj)/mtools.conf
136 $(call cmd,genimage,fdimage144,$(obj)/fdimage)
137 @$(kecho) 'Kernel: $(obj)/fdimage is ready'
138
139fdimage288: $(obj)/bzImage $(obj)/mtools.conf
140 $(call cmd,genimage,fdimage288,$(obj)/fdimage)
141 @$(kecho) 'Kernel: $(obj)/fdimage is ready'
142
143isoimage: $(obj)/bzImage
144 $(call cmd,genimage,isoimage,$(obj)/image.iso)
145 @$(kecho) 'Kernel: $(obj)/image.iso is ready'
146
147bzlilo: $(obj)/bzImage
148 if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
149 if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
150 cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz
151 cp System.map $(INSTALL_PATH)/
152 if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
153
154install:
155 sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(obj)/bzImage \
156 System.map "$(INSTALL_PATH)"