Loading...
1/*
2 * Hardware definitions for Palm Tungsten|E2
3 *
4 * Author:
5 * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
6 *
7 * Rewrite for mainline:
8 * Marek Vasut <marek.vasut@gmail.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 *
14 * (find more info at www.hackndev.com)
15 *
16 */
17
18#include <linux/platform_device.h>
19#include <linux/delay.h>
20#include <linux/irq.h>
21#include <linux/gpio_keys.h>
22#include <linux/input.h>
23#include <linux/pda_power.h>
24#include <linux/pwm_backlight.h>
25#include <linux/gpio.h>
26#include <linux/wm97xx.h>
27#include <linux/power_supply.h>
28#include <linux/usb/gpio_vbus.h>
29
30#include <asm/mach-types.h>
31#include <asm/mach/arch.h>
32#include <asm/mach/map.h>
33
34#include <mach/pxa25x.h>
35#include <mach/audio.h>
36#include <mach/palmte2.h>
37#include <linux/platform_data/mmc-pxamci.h>
38#include <linux/platform_data/video-pxafb.h>
39#include <linux/platform_data/irda-pxaficp.h>
40#include <mach/udc.h>
41#include <linux/platform_data/asoc-palm27x.h>
42
43#include "generic.h"
44#include "devices.h"
45
46/******************************************************************************
47 * Pin configuration
48 ******************************************************************************/
49static unsigned long palmte2_pin_config[] __initdata = {
50 /* MMC */
51 GPIO6_MMC_CLK,
52 GPIO8_MMC_CS0,
53 GPIO10_GPIO, /* SD detect */
54 GPIO55_GPIO, /* SD power */
55 GPIO51_GPIO, /* SD r/o switch */
56
57 /* AC97 */
58 GPIO28_AC97_BITCLK,
59 GPIO29_AC97_SDATA_IN_0,
60 GPIO30_AC97_SDATA_OUT,
61 GPIO31_AC97_SYNC,
62
63 /* PWM */
64 GPIO16_PWM0_OUT,
65
66 /* USB */
67 GPIO15_GPIO, /* usb detect */
68 GPIO53_GPIO, /* usb power */
69
70 /* IrDA */
71 GPIO48_GPIO, /* ir disable */
72 GPIO46_FICP_RXD,
73 GPIO47_FICP_TXD,
74
75 /* LCD */
76 GPIOxx_LCD_TFT_16BPP,
77
78 /* GPIO KEYS */
79 GPIO5_GPIO, /* notes */
80 GPIO7_GPIO, /* tasks */
81 GPIO11_GPIO, /* calendar */
82 GPIO13_GPIO, /* contacts */
83 GPIO14_GPIO, /* center */
84 GPIO19_GPIO, /* left */
85 GPIO20_GPIO, /* right */
86 GPIO21_GPIO, /* down */
87 GPIO22_GPIO, /* up */
88
89 /* MISC */
90 GPIO1_RST, /* reset */
91 GPIO4_GPIO, /* Hotsync button */
92 GPIO9_GPIO, /* power detect */
93 GPIO15_GPIO, /* earphone detect */
94 GPIO37_GPIO, /* LCD power */
95 GPIO56_GPIO, /* Backlight power */
96};
97
98/******************************************************************************
99 * SD/MMC card controller
100 ******************************************************************************/
101static struct pxamci_platform_data palmte2_mci_platform_data = {
102 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
103 .gpio_card_detect = GPIO_NR_PALMTE2_SD_DETECT_N,
104 .gpio_card_ro = GPIO_NR_PALMTE2_SD_READONLY,
105 .gpio_power = GPIO_NR_PALMTE2_SD_POWER,
106};
107
108#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
109/******************************************************************************
110 * GPIO keys
111 ******************************************************************************/
112static struct gpio_keys_button palmte2_pxa_buttons[] = {
113 {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" },
114 {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" },
115 {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" },
116 {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" },
117 {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" },
118 {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" },
119 {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" },
120 {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" },
121 {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" },
122};
123
124static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
125 .buttons = palmte2_pxa_buttons,
126 .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons),
127};
128
129static struct platform_device palmte2_pxa_keys = {
130 .name = "gpio-keys",
131 .id = -1,
132 .dev = {
133 .platform_data = &palmte2_pxa_keys_data,
134 },
135};
136#endif
137
138/******************************************************************************
139 * Backlight
140 ******************************************************************************/
141static struct gpio palmte_bl_gpios[] = {
142 { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
143 { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
144};
145
146static int palmte2_backlight_init(struct device *dev)
147{
148 return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
149}
150
151static int palmte2_backlight_notify(struct device *dev, int brightness)
152{
153 gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
154 gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
155 return brightness;
156}
157
158static void palmte2_backlight_exit(struct device *dev)
159{
160 gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
161}
162
163static struct platform_pwm_backlight_data palmte2_backlight_data = {
164 .pwm_id = 0,
165 .max_brightness = PALMTE2_MAX_INTENSITY,
166 .dft_brightness = PALMTE2_MAX_INTENSITY,
167 .pwm_period_ns = PALMTE2_PERIOD_NS,
168 .enable_gpio = -1,
169 .init = palmte2_backlight_init,
170 .notify = palmte2_backlight_notify,
171 .exit = palmte2_backlight_exit,
172};
173
174static struct platform_device palmte2_backlight = {
175 .name = "pwm-backlight",
176 .dev = {
177 .parent = &pxa25x_device_pwm0.dev,
178 .platform_data = &palmte2_backlight_data,
179 },
180};
181
182/******************************************************************************
183 * IrDA
184 ******************************************************************************/
185static struct pxaficp_platform_data palmte2_ficp_platform_data = {
186 .gpio_pwdown = GPIO_NR_PALMTE2_IR_DISABLE,
187 .transceiver_cap = IR_SIRMODE | IR_OFF,
188};
189
190/******************************************************************************
191 * UDC
192 ******************************************************************************/
193static struct gpio_vbus_mach_info palmte2_udc_info = {
194 .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
195 .gpio_vbus_inverted = 1,
196 .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
197};
198
199static struct platform_device palmte2_gpio_vbus = {
200 .name = "gpio-vbus",
201 .id = -1,
202 .dev = {
203 .platform_data = &palmte2_udc_info,
204 },
205};
206
207/******************************************************************************
208 * Power supply
209 ******************************************************************************/
210static int power_supply_init(struct device *dev)
211{
212 int ret;
213
214 ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
215 if (ret)
216 goto err1;
217 ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
218 if (ret)
219 goto err2;
220
221 return 0;
222
223err2:
224 gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
225err1:
226 return ret;
227}
228
229static int palmte2_is_ac_online(void)
230{
231 return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
232}
233
234static void power_supply_exit(struct device *dev)
235{
236 gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
237}
238
239static char *palmte2_supplicants[] = {
240 "main-battery",
241};
242
243static struct pda_power_pdata power_supply_info = {
244 .init = power_supply_init,
245 .is_ac_online = palmte2_is_ac_online,
246 .exit = power_supply_exit,
247 .supplied_to = palmte2_supplicants,
248 .num_supplicants = ARRAY_SIZE(palmte2_supplicants),
249};
250
251static struct platform_device power_supply = {
252 .name = "pda-power",
253 .id = -1,
254 .dev = {
255 .platform_data = &power_supply_info,
256 },
257};
258
259/******************************************************************************
260 * WM97xx audio, battery
261 ******************************************************************************/
262static struct wm97xx_batt_pdata palmte2_batt_pdata = {
263 .batt_aux = WM97XX_AUX_ID3,
264 .temp_aux = WM97XX_AUX_ID2,
265 .charge_gpio = -1,
266 .max_voltage = PALMTE2_BAT_MAX_VOLTAGE,
267 .min_voltage = PALMTE2_BAT_MIN_VOLTAGE,
268 .batt_mult = 1000,
269 .batt_div = 414,
270 .temp_mult = 1,
271 .temp_div = 1,
272 .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
273 .batt_name = "main-batt",
274};
275
276static struct wm97xx_pdata palmte2_wm97xx_pdata = {
277 .batt_pdata = &palmte2_batt_pdata,
278};
279
280static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
281 .codec_pdata = { &palmte2_wm97xx_pdata, },
282};
283
284static struct palm27x_asoc_info palmte2_asoc_pdata = {
285 .jack_gpio = GPIO_NR_PALMTE2_EARPHONE_DETECT,
286};
287
288static struct platform_device palmte2_asoc = {
289 .name = "palm27x-asoc",
290 .id = -1,
291 .dev = {
292 .platform_data = &palmte2_asoc_pdata,
293 },
294};
295
296/******************************************************************************
297 * Framebuffer
298 ******************************************************************************/
299static struct pxafb_mode_info palmte2_lcd_modes[] = {
300{
301 .pixclock = 77757,
302 .xres = 320,
303 .yres = 320,
304 .bpp = 16,
305
306 .left_margin = 28,
307 .right_margin = 7,
308 .upper_margin = 7,
309 .lower_margin = 5,
310
311 .hsync_len = 4,
312 .vsync_len = 1,
313},
314};
315
316static struct pxafb_mach_info palmte2_lcd_screen = {
317 .modes = palmte2_lcd_modes,
318 .num_modes = ARRAY_SIZE(palmte2_lcd_modes),
319 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
320};
321
322/******************************************************************************
323 * Machine init
324 ******************************************************************************/
325static struct platform_device *devices[] __initdata = {
326#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
327 &palmte2_pxa_keys,
328#endif
329 &palmte2_backlight,
330 &power_supply,
331 &palmte2_asoc,
332 &palmte2_gpio_vbus,
333};
334
335/* setup udc GPIOs initial state */
336static void __init palmte2_udc_init(void)
337{
338 if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
339 gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
340 gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
341 }
342}
343
344static void __init palmte2_init(void)
345{
346 pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
347
348 pxa_set_ffuart_info(NULL);
349 pxa_set_btuart_info(NULL);
350 pxa_set_stuart_info(NULL);
351
352 pxa_set_fb_info(NULL, &palmte2_lcd_screen);
353 pxa_set_mci_info(&palmte2_mci_platform_data);
354 palmte2_udc_init();
355 pxa_set_ac97_info(&palmte2_ac97_pdata);
356 pxa_set_ficp_info(&palmte2_ficp_platform_data);
357
358 platform_add_devices(devices, ARRAY_SIZE(devices));
359}
360
361MACHINE_START(PALMTE2, "Palm Tungsten|E2")
362 .atag_offset = 0x100,
363 .map_io = pxa25x_map_io,
364 .nr_irqs = PXA_NR_IRQS,
365 .init_irq = pxa25x_init_irq,
366 .handle_irq = pxa25x_handle_irq,
367 .init_time = pxa_timer_init,
368 .init_machine = palmte2_init,
369 .restart = pxa_restart,
370MACHINE_END
1/*
2 * Hardware definitions for Palm Tungsten|E2
3 *
4 * Author:
5 * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
6 *
7 * Rewrite for mainline:
8 * Marek Vasut <marek.vasut@gmail.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 *
14 * (find more info at www.hackndev.com)
15 *
16 */
17
18#include <linux/platform_device.h>
19#include <linux/delay.h>
20#include <linux/irq.h>
21#include <linux/gpio_keys.h>
22#include <linux/input.h>
23#include <linux/pda_power.h>
24#include <linux/pwm.h>
25#include <linux/pwm_backlight.h>
26#include <linux/gpio.h>
27#include <linux/wm97xx.h>
28#include <linux/power_supply.h>
29#include <linux/usb/gpio_vbus.h>
30
31#include <asm/mach-types.h>
32#include <asm/mach/arch.h>
33#include <asm/mach/map.h>
34
35#include "pxa25x.h"
36#include <mach/audio.h>
37#include "palmte2.h"
38#include <linux/platform_data/mmc-pxamci.h>
39#include <linux/platform_data/video-pxafb.h>
40#include <linux/platform_data/irda-pxaficp.h>
41#include "udc.h"
42#include <linux/platform_data/asoc-palm27x.h>
43
44#include "generic.h"
45#include "devices.h"
46
47/******************************************************************************
48 * Pin configuration
49 ******************************************************************************/
50static unsigned long palmte2_pin_config[] __initdata = {
51 /* MMC */
52 GPIO6_MMC_CLK,
53 GPIO8_MMC_CS0,
54 GPIO10_GPIO, /* SD detect */
55 GPIO55_GPIO, /* SD power */
56 GPIO51_GPIO, /* SD r/o switch */
57
58 /* AC97 */
59 GPIO28_AC97_BITCLK,
60 GPIO29_AC97_SDATA_IN_0,
61 GPIO30_AC97_SDATA_OUT,
62 GPIO31_AC97_SYNC,
63
64 /* PWM */
65 GPIO16_PWM0_OUT,
66
67 /* USB */
68 GPIO15_GPIO, /* usb detect */
69 GPIO53_GPIO, /* usb power */
70
71 /* IrDA */
72 GPIO48_GPIO, /* ir disable */
73 GPIO46_FICP_RXD,
74 GPIO47_FICP_TXD,
75
76 /* LCD */
77 GPIOxx_LCD_TFT_16BPP,
78
79 /* GPIO KEYS */
80 GPIO5_GPIO, /* notes */
81 GPIO7_GPIO, /* tasks */
82 GPIO11_GPIO, /* calendar */
83 GPIO13_GPIO, /* contacts */
84 GPIO14_GPIO, /* center */
85 GPIO19_GPIO, /* left */
86 GPIO20_GPIO, /* right */
87 GPIO21_GPIO, /* down */
88 GPIO22_GPIO, /* up */
89
90 /* MISC */
91 GPIO1_RST, /* reset */
92 GPIO4_GPIO, /* Hotsync button */
93 GPIO9_GPIO, /* power detect */
94 GPIO15_GPIO, /* earphone detect */
95 GPIO37_GPIO, /* LCD power */
96 GPIO56_GPIO, /* Backlight power */
97};
98
99/******************************************************************************
100 * SD/MMC card controller
101 ******************************************************************************/
102static struct pxamci_platform_data palmte2_mci_platform_data = {
103 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
104 .gpio_card_detect = GPIO_NR_PALMTE2_SD_DETECT_N,
105 .gpio_card_ro = GPIO_NR_PALMTE2_SD_READONLY,
106 .gpio_power = GPIO_NR_PALMTE2_SD_POWER,
107};
108
109#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
110/******************************************************************************
111 * GPIO keys
112 ******************************************************************************/
113static struct gpio_keys_button palmte2_pxa_buttons[] = {
114 {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" },
115 {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" },
116 {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" },
117 {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" },
118 {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" },
119 {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" },
120 {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" },
121 {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" },
122 {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" },
123};
124
125static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
126 .buttons = palmte2_pxa_buttons,
127 .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons),
128};
129
130static struct platform_device palmte2_pxa_keys = {
131 .name = "gpio-keys",
132 .id = -1,
133 .dev = {
134 .platform_data = &palmte2_pxa_keys_data,
135 },
136};
137#endif
138
139/******************************************************************************
140 * Backlight
141 ******************************************************************************/
142static struct pwm_lookup palmte2_pwm_lookup[] = {
143 PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
144 PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
145};
146
147static struct gpio palmte_bl_gpios[] = {
148 { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
149 { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
150};
151
152static int palmte2_backlight_init(struct device *dev)
153{
154 return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
155}
156
157static int palmte2_backlight_notify(struct device *dev, int brightness)
158{
159 gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
160 gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
161 return brightness;
162}
163
164static void palmte2_backlight_exit(struct device *dev)
165{
166 gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
167}
168
169static struct platform_pwm_backlight_data palmte2_backlight_data = {
170 .max_brightness = PALMTE2_MAX_INTENSITY,
171 .dft_brightness = PALMTE2_MAX_INTENSITY,
172 .enable_gpio = -1,
173 .init = palmte2_backlight_init,
174 .notify = palmte2_backlight_notify,
175 .exit = palmte2_backlight_exit,
176};
177
178static struct platform_device palmte2_backlight = {
179 .name = "pwm-backlight",
180 .dev = {
181 .parent = &pxa25x_device_pwm0.dev,
182 .platform_data = &palmte2_backlight_data,
183 },
184};
185
186/******************************************************************************
187 * IrDA
188 ******************************************************************************/
189static struct pxaficp_platform_data palmte2_ficp_platform_data = {
190 .gpio_pwdown = GPIO_NR_PALMTE2_IR_DISABLE,
191 .transceiver_cap = IR_SIRMODE | IR_OFF,
192};
193
194/******************************************************************************
195 * UDC
196 ******************************************************************************/
197static struct gpio_vbus_mach_info palmte2_udc_info = {
198 .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
199 .gpio_vbus_inverted = 1,
200 .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
201};
202
203static struct platform_device palmte2_gpio_vbus = {
204 .name = "gpio-vbus",
205 .id = -1,
206 .dev = {
207 .platform_data = &palmte2_udc_info,
208 },
209};
210
211/******************************************************************************
212 * Power supply
213 ******************************************************************************/
214static int power_supply_init(struct device *dev)
215{
216 int ret;
217
218 ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
219 if (ret)
220 goto err1;
221 ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
222 if (ret)
223 goto err2;
224
225 return 0;
226
227err2:
228 gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
229err1:
230 return ret;
231}
232
233static int palmte2_is_ac_online(void)
234{
235 return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
236}
237
238static void power_supply_exit(struct device *dev)
239{
240 gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
241}
242
243static char *palmte2_supplicants[] = {
244 "main-battery",
245};
246
247static struct pda_power_pdata power_supply_info = {
248 .init = power_supply_init,
249 .is_ac_online = palmte2_is_ac_online,
250 .exit = power_supply_exit,
251 .supplied_to = palmte2_supplicants,
252 .num_supplicants = ARRAY_SIZE(palmte2_supplicants),
253};
254
255static struct platform_device power_supply = {
256 .name = "pda-power",
257 .id = -1,
258 .dev = {
259 .platform_data = &power_supply_info,
260 },
261};
262
263/******************************************************************************
264 * WM97xx audio, battery
265 ******************************************************************************/
266static struct wm97xx_batt_pdata palmte2_batt_pdata = {
267 .batt_aux = WM97XX_AUX_ID3,
268 .temp_aux = WM97XX_AUX_ID2,
269 .charge_gpio = -1,
270 .max_voltage = PALMTE2_BAT_MAX_VOLTAGE,
271 .min_voltage = PALMTE2_BAT_MIN_VOLTAGE,
272 .batt_mult = 1000,
273 .batt_div = 414,
274 .temp_mult = 1,
275 .temp_div = 1,
276 .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
277 .batt_name = "main-batt",
278};
279
280static struct wm97xx_pdata palmte2_wm97xx_pdata = {
281 .batt_pdata = &palmte2_batt_pdata,
282};
283
284static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
285 .codec_pdata = { &palmte2_wm97xx_pdata, },
286};
287
288static struct palm27x_asoc_info palmte2_asoc_pdata = {
289 .jack_gpio = GPIO_NR_PALMTE2_EARPHONE_DETECT,
290};
291
292static struct platform_device palmte2_asoc = {
293 .name = "palm27x-asoc",
294 .id = -1,
295 .dev = {
296 .platform_data = &palmte2_asoc_pdata,
297 },
298};
299
300/******************************************************************************
301 * Framebuffer
302 ******************************************************************************/
303static struct pxafb_mode_info palmte2_lcd_modes[] = {
304{
305 .pixclock = 77757,
306 .xres = 320,
307 .yres = 320,
308 .bpp = 16,
309
310 .left_margin = 28,
311 .right_margin = 7,
312 .upper_margin = 7,
313 .lower_margin = 5,
314
315 .hsync_len = 4,
316 .vsync_len = 1,
317},
318};
319
320static struct pxafb_mach_info palmte2_lcd_screen = {
321 .modes = palmte2_lcd_modes,
322 .num_modes = ARRAY_SIZE(palmte2_lcd_modes),
323 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
324};
325
326/******************************************************************************
327 * Machine init
328 ******************************************************************************/
329static struct platform_device *devices[] __initdata = {
330#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
331 &palmte2_pxa_keys,
332#endif
333 &palmte2_backlight,
334 &power_supply,
335 &palmte2_asoc,
336 &palmte2_gpio_vbus,
337};
338
339/* setup udc GPIOs initial state */
340static void __init palmte2_udc_init(void)
341{
342 if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
343 gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
344 gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
345 }
346}
347
348static void __init palmte2_init(void)
349{
350 pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
351
352 pxa_set_ffuart_info(NULL);
353 pxa_set_btuart_info(NULL);
354 pxa_set_stuart_info(NULL);
355
356 pxa_set_fb_info(NULL, &palmte2_lcd_screen);
357 pxa_set_mci_info(&palmte2_mci_platform_data);
358 palmte2_udc_init();
359 pxa_set_ac97_info(&palmte2_ac97_pdata);
360 pxa_set_ficp_info(&palmte2_ficp_platform_data);
361
362 pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
363 platform_add_devices(devices, ARRAY_SIZE(devices));
364}
365
366MACHINE_START(PALMTE2, "Palm Tungsten|E2")
367 .atag_offset = 0x100,
368 .map_io = pxa25x_map_io,
369 .nr_irqs = PXA_NR_IRQS,
370 .init_irq = pxa25x_init_irq,
371 .handle_irq = pxa25x_handle_irq,
372 .init_time = pxa_timer_init,
373 .init_machine = palmte2_init,
374 .restart = pxa_restart,
375MACHINE_END