Loading...
1/*
2 * linux/arch/arm/mach-pxa/icontrol.c
3 *
4 * Support for the iControl and SafeTcam platforms from TMT Services
5 * using the Embedian MXM-8x10 Computer on Module
6 *
7 * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
8 *
9 * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16#include <linux/irq.h>
17#include <linux/platform_device.h>
18#include <linux/gpio.h>
19
20#include <asm/mach-types.h>
21#include <asm/mach/arch.h>
22
23#include <mach/pxa320.h>
24#include <mach/mxm8x10.h>
25
26#include <linux/spi/spi.h>
27#include <linux/spi/pxa2xx_spi.h>
28#include <linux/can/platform/mcp251x.h>
29
30#include "generic.h"
31
32#define ICONTROL_MCP251x_nCS1 (15)
33#define ICONTROL_MCP251x_nCS2 (16)
34#define ICONTROL_MCP251x_nCS3 (17)
35#define ICONTROL_MCP251x_nCS4 (24)
36
37#define ICONTROL_MCP251x_nIRQ1 (74)
38#define ICONTROL_MCP251x_nIRQ2 (75)
39#define ICONTROL_MCP251x_nIRQ3 (76)
40#define ICONTROL_MCP251x_nIRQ4 (77)
41
42static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
43 .tx_threshold = 8,
44 .rx_threshold = 128,
45 .dma_burst_size = 8,
46 .timeout = 235,
47 .gpio_cs = ICONTROL_MCP251x_nCS1
48};
49
50static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
51 .tx_threshold = 8,
52 .rx_threshold = 128,
53 .dma_burst_size = 8,
54 .timeout = 235,
55 .gpio_cs = ICONTROL_MCP251x_nCS2
56};
57
58static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
59 .tx_threshold = 8,
60 .rx_threshold = 128,
61 .dma_burst_size = 8,
62 .timeout = 235,
63 .gpio_cs = ICONTROL_MCP251x_nCS3
64};
65
66static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
67 .tx_threshold = 8,
68 .rx_threshold = 128,
69 .dma_burst_size = 8,
70 .timeout = 235,
71 .gpio_cs = ICONTROL_MCP251x_nCS4
72};
73
74static struct mcp251x_platform_data mcp251x_info = {
75 .oscillator_frequency = 16E6,
76};
77
78static struct spi_board_info mcp251x_board_info[] = {
79 {
80 .modalias = "mcp2515",
81 .max_speed_hz = 6500000,
82 .bus_num = 3,
83 .chip_select = 0,
84 .platform_data = &mcp251x_info,
85 .controller_data = &mcp251x_chip_info1,
86 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
87 },
88 {
89 .modalias = "mcp2515",
90 .max_speed_hz = 6500000,
91 .bus_num = 3,
92 .chip_select = 1,
93 .platform_data = &mcp251x_info,
94 .controller_data = &mcp251x_chip_info2,
95 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
96 },
97 {
98 .modalias = "mcp2515",
99 .max_speed_hz = 6500000,
100 .bus_num = 4,
101 .chip_select = 0,
102 .platform_data = &mcp251x_info,
103 .controller_data = &mcp251x_chip_info3,
104 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
105 },
106 {
107 .modalias = "mcp2515",
108 .max_speed_hz = 6500000,
109 .bus_num = 4,
110 .chip_select = 1,
111 .platform_data = &mcp251x_info,
112 .controller_data = &mcp251x_chip_info4,
113 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
114 }
115};
116
117static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
118 .clock_enable = CKEN_SSP3,
119 .num_chipselect = 2,
120 .enable_dma = 1
121};
122
123static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
124 .clock_enable = CKEN_SSP4,
125 .num_chipselect = 2,
126 .enable_dma = 1
127};
128
129struct platform_device pxa_spi_ssp3 = {
130 .name = "pxa2xx-spi",
131 .id = 3,
132 .dev = {
133 .platform_data = &pxa_ssp3_spi_master_info,
134 }
135};
136
137struct platform_device pxa_spi_ssp4 = {
138 .name = "pxa2xx-spi",
139 .id = 4,
140 .dev = {
141 .platform_data = &pxa_ssp4_spi_master_info,
142 }
143};
144
145static struct platform_device *icontrol_spi_devices[] __initdata = {
146 &pxa_spi_ssp3,
147 &pxa_spi_ssp4,
148};
149
150static mfp_cfg_t mfp_can_cfg[] __initdata = {
151 /* CAN CS lines */
152 GPIO15_GPIO,
153 GPIO16_GPIO,
154 GPIO17_GPIO,
155 GPIO24_GPIO,
156
157 /* SPI (SSP3) lines */
158 GPIO89_SSP3_SCLK,
159 GPIO91_SSP3_TXD,
160 GPIO92_SSP3_RXD,
161
162 /* SPI (SSP4) lines */
163 GPIO93_SSP4_SCLK,
164 GPIO95_SSP4_TXD,
165 GPIO96_SSP4_RXD,
166
167 /* CAN nIRQ lines */
168 GPIO74_GPIO | MFP_LPM_EDGE_RISE,
169 GPIO75_GPIO | MFP_LPM_EDGE_RISE,
170 GPIO76_GPIO | MFP_LPM_EDGE_RISE,
171 GPIO77_GPIO | MFP_LPM_EDGE_RISE
172};
173
174static void __init icontrol_can_init(void)
175{
176 pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
177 platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
178 spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
179}
180
181static void __init icontrol_init(void)
182{
183 mxm_8x10_barebones_init();
184 mxm_8x10_usb_host_init();
185 mxm_8x10_mmc_init();
186
187 icontrol_can_init();
188}
189
190MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
191 .atag_offset = 0x100,
192 .map_io = pxa3xx_map_io,
193 .nr_irqs = PXA_NR_IRQS,
194 .init_irq = pxa3xx_init_irq,
195 .handle_irq = pxa3xx_handle_irq,
196 .init_time = pxa_timer_init,
197 .init_machine = icontrol_init,
198 .restart = pxa_restart,
199MACHINE_END
1/*
2 * linux/arch/arm/mach-pxa/icontrol.c
3 *
4 * Support for the iControl and SafeTcam platforms from TMT Services
5 * using the Embedian MXM-8x10 Computer on Module
6 *
7 * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
8 *
9 * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16#include <linux/irq.h>
17#include <linux/platform_device.h>
18#include <linux/gpio.h>
19
20#include <asm/mach-types.h>
21#include <asm/mach/arch.h>
22
23#include "pxa320.h"
24#include "mxm8x10.h"
25
26#include <linux/spi/spi.h>
27#include <linux/spi/pxa2xx_spi.h>
28#include <linux/can/platform/mcp251x.h>
29#include <linux/regulator/machine.h>
30
31#include "generic.h"
32
33#define ICONTROL_MCP251x_nCS1 (15)
34#define ICONTROL_MCP251x_nCS2 (16)
35#define ICONTROL_MCP251x_nCS3 (17)
36#define ICONTROL_MCP251x_nCS4 (24)
37
38#define ICONTROL_MCP251x_nIRQ1 (74)
39#define ICONTROL_MCP251x_nIRQ2 (75)
40#define ICONTROL_MCP251x_nIRQ3 (76)
41#define ICONTROL_MCP251x_nIRQ4 (77)
42
43static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
44 .tx_threshold = 8,
45 .rx_threshold = 128,
46 .dma_burst_size = 8,
47 .timeout = 235,
48 .gpio_cs = ICONTROL_MCP251x_nCS1
49};
50
51static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
52 .tx_threshold = 8,
53 .rx_threshold = 128,
54 .dma_burst_size = 8,
55 .timeout = 235,
56 .gpio_cs = ICONTROL_MCP251x_nCS2
57};
58
59static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
60 .tx_threshold = 8,
61 .rx_threshold = 128,
62 .dma_burst_size = 8,
63 .timeout = 235,
64 .gpio_cs = ICONTROL_MCP251x_nCS3
65};
66
67static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
68 .tx_threshold = 8,
69 .rx_threshold = 128,
70 .dma_burst_size = 8,
71 .timeout = 235,
72 .gpio_cs = ICONTROL_MCP251x_nCS4
73};
74
75static struct mcp251x_platform_data mcp251x_info = {
76 .oscillator_frequency = 16E6,
77};
78
79static struct spi_board_info mcp251x_board_info[] = {
80 {
81 .modalias = "mcp2515",
82 .max_speed_hz = 6500000,
83 .bus_num = 3,
84 .chip_select = 0,
85 .platform_data = &mcp251x_info,
86 .controller_data = &mcp251x_chip_info1,
87 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
88 },
89 {
90 .modalias = "mcp2515",
91 .max_speed_hz = 6500000,
92 .bus_num = 3,
93 .chip_select = 1,
94 .platform_data = &mcp251x_info,
95 .controller_data = &mcp251x_chip_info2,
96 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
97 },
98 {
99 .modalias = "mcp2515",
100 .max_speed_hz = 6500000,
101 .bus_num = 4,
102 .chip_select = 0,
103 .platform_data = &mcp251x_info,
104 .controller_data = &mcp251x_chip_info3,
105 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
106 },
107 {
108 .modalias = "mcp2515",
109 .max_speed_hz = 6500000,
110 .bus_num = 4,
111 .chip_select = 1,
112 .platform_data = &mcp251x_info,
113 .controller_data = &mcp251x_chip_info4,
114 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
115 }
116};
117
118static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
119 .num_chipselect = 2,
120 .enable_dma = 1
121};
122
123static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
124 .num_chipselect = 2,
125 .enable_dma = 1
126};
127
128struct platform_device pxa_spi_ssp3 = {
129 .name = "pxa2xx-spi",
130 .id = 3,
131 .dev = {
132 .platform_data = &pxa_ssp3_spi_master_info,
133 }
134};
135
136struct platform_device pxa_spi_ssp4 = {
137 .name = "pxa2xx-spi",
138 .id = 4,
139 .dev = {
140 .platform_data = &pxa_ssp4_spi_master_info,
141 }
142};
143
144static struct platform_device *icontrol_spi_devices[] __initdata = {
145 &pxa_spi_ssp3,
146 &pxa_spi_ssp4,
147};
148
149static mfp_cfg_t mfp_can_cfg[] __initdata = {
150 /* CAN CS lines */
151 GPIO15_GPIO,
152 GPIO16_GPIO,
153 GPIO17_GPIO,
154 GPIO24_GPIO,
155
156 /* SPI (SSP3) lines */
157 GPIO89_SSP3_SCLK,
158 GPIO91_SSP3_TXD,
159 GPIO92_SSP3_RXD,
160
161 /* SPI (SSP4) lines */
162 GPIO93_SSP4_SCLK,
163 GPIO95_SSP4_TXD,
164 GPIO96_SSP4_RXD,
165
166 /* CAN nIRQ lines */
167 GPIO74_GPIO | MFP_LPM_EDGE_RISE,
168 GPIO75_GPIO | MFP_LPM_EDGE_RISE,
169 GPIO76_GPIO | MFP_LPM_EDGE_RISE,
170 GPIO77_GPIO | MFP_LPM_EDGE_RISE
171};
172
173static void __init icontrol_can_init(void)
174{
175 pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
176 platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
177 spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
178}
179
180static void __init icontrol_init(void)
181{
182 mxm_8x10_barebones_init();
183 mxm_8x10_usb_host_init();
184 mxm_8x10_mmc_init();
185
186 icontrol_can_init();
187
188 regulator_has_full_constraints();
189}
190
191MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
192 .atag_offset = 0x100,
193 .map_io = pxa3xx_map_io,
194 .nr_irqs = PXA_NR_IRQS,
195 .init_irq = pxa3xx_init_irq,
196 .handle_irq = pxa3xx_handle_irq,
197 .init_time = pxa_timer_init,
198 .init_machine = icontrol_init,
199 .restart = pxa_restart,
200MACHINE_END