Linux Audio

Check our new training course

Loading...
Note: File does not exist in v4.17.
  1/*
  2 * board-omap3pandora.c (Pandora Handheld Console)
  3 *
  4 * This program is free software; you can redistribute it and/or
  5 * modify it under the terms of the GNU General Public License
  6 * version 2 as published by the Free Software Foundation.
  7 *
  8 * This program is distributed in the hope that it will be useful, but
  9 * WITHOUT ANY WARRANTY; without even the implied warranty of
 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 11 * General Public License for more details.
 12 *
 13 * You should have received a copy of the GNU General Public License
 14 * along with this program; if not, write to the Free Software
 15 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 16 * 02110-1301 USA
 17 *
 18 */
 19
 20#include <linux/init.h>
 21#include <linux/kernel.h>
 22#include <linux/platform_device.h>
 23
 24#include <linux/spi/spi.h>
 25#include <linux/regulator/machine.h>
 26#include <linux/i2c/twl.h>
 27#include <linux/wl12xx.h>
 28#include <linux/mtd/partitions.h>
 29#include <linux/mtd/nand.h>
 30#include <linux/leds.h>
 31#include <linux/input.h>
 32#include <linux/input/matrix_keypad.h>
 33#include <linux/gpio.h>
 34#include <linux/gpio_keys.h>
 35#include <linux/mmc/host.h>
 36#include <linux/mmc/card.h>
 37#include <linux/regulator/fixed.h>
 38#include <linux/usb/phy.h>
 39#include <linux/platform_data/spi-omap2-mcspi.h>
 40
 41#include <asm/mach-types.h>
 42#include <asm/mach/arch.h>
 43#include <asm/mach/map.h>
 44
 45#include "common.h"
 46#include <video/omapdss.h>
 47#include <video/omap-panel-data.h>
 48#include <linux/platform_data/mtd-nand-omap2.h>
 49
 50#include "mux.h"
 51#include "sdram-micron-mt46h32m32lf-6.h"
 52#include "hsmmc.h"
 53#include "common-board-devices.h"
 54#include "gpmc-nand.h"
 55
 56#define PANDORA_WIFI_IRQ_GPIO		21
 57#define PANDORA_WIFI_NRESET_GPIO	23
 58#define OMAP3_PANDORA_TS_GPIO		94
 59
 60static struct mtd_partition omap3pandora_nand_partitions[] = {
 61	{
 62		.name           = "xloader",
 63		.offset         = 0,
 64		.size           = 4 * NAND_BLOCK_SIZE,
 65		.mask_flags     = MTD_WRITEABLE
 66	}, {
 67		.name           = "uboot",
 68		.offset         = MTDPART_OFS_APPEND,
 69		.size           = 15 * NAND_BLOCK_SIZE,
 70	}, {
 71		.name           = "uboot-env",
 72		.offset         = MTDPART_OFS_APPEND,
 73		.size           = 1 * NAND_BLOCK_SIZE,
 74	}, {
 75		.name           = "boot",
 76		.offset         = MTDPART_OFS_APPEND,
 77		.size           = 80 * NAND_BLOCK_SIZE,
 78	}, {
 79		.name           = "rootfs",
 80		.offset         = MTDPART_OFS_APPEND,
 81		.size           = MTDPART_SIZ_FULL,
 82	},
 83};
 84
 85static struct omap_nand_platform_data pandora_nand_data = {
 86	.cs		= 0,
 87	.devsize	= NAND_BUSWIDTH_16,
 88	.xfer_type	= NAND_OMAP_PREFETCH_DMA,
 89	.parts		= omap3pandora_nand_partitions,
 90	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
 91};
 92
 93static struct gpio_led pandora_gpio_leds[] = {
 94	{
 95		.name			= "pandora::sd1",
 96		.default_trigger	= "mmc0",
 97		.gpio			= 128,
 98	}, {
 99		.name			= "pandora::sd2",
100		.default_trigger	= "mmc1",
101		.gpio			= 129,
102	}, {
103		.name			= "pandora::bluetooth",
104		.gpio			= 158,
105	}, {
106		.name			= "pandora::wifi",
107		.gpio			= 159,
108	},
109};
110
111static struct gpio_led_platform_data pandora_gpio_led_data = {
112	.leds		= pandora_gpio_leds,
113	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
114};
115
116static struct platform_device pandora_leds_gpio = {
117	.name	= "leds-gpio",
118	.id	= -1,
119	.dev	= {
120		.platform_data	= &pandora_gpio_led_data,
121	},
122};
123
124static struct platform_device pandora_backlight = {
125	.name	= "pandora-backlight",
126	.id	= -1,
127};
128
129#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
130{								\
131	.gpio		= gpio_num,				\
132	.type		= ev_type,				\
133	.code		= ev_code,				\
134	.active_low	= act_low,				\
135	.debounce_interval = 4,					\
136	.desc		= "btn " descr,				\
137}
138
139#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
140	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
141
142static struct gpio_keys_button pandora_gpio_keys[] = {
143	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
144	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
145	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
146	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
147	GPIO_BUTTON_LOW(109,	KEY_PAGEUP,	"game 1"),
148	GPIO_BUTTON_LOW(111,	KEY_END,	"game 2"),
149	GPIO_BUTTON_LOW(106,	KEY_PAGEDOWN,	"game 3"),
150	GPIO_BUTTON_LOW(101,	KEY_HOME,	"game 4"),
151	GPIO_BUTTON_LOW(102,	KEY_RIGHTSHIFT,	"l"),
152	GPIO_BUTTON_LOW(97,	KEY_KPPLUS,	"l2"),
153	GPIO_BUTTON_LOW(105,	KEY_RIGHTCTRL,	"r"),
154	GPIO_BUTTON_LOW(107,	KEY_KPMINUS,	"r2"),
155	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
156	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
157	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
158	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
159	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
160};
161
162static struct gpio_keys_platform_data pandora_gpio_key_info = {
163	.buttons	= pandora_gpio_keys,
164	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
165};
166
167static struct platform_device pandora_keys_gpio = {
168	.name	= "gpio-keys",
169	.id	= -1,
170	.dev	= {
171		.platform_data	= &pandora_gpio_key_info,
172	},
173};
174
175static const uint32_t board_keymap[] = {
176	/* row, col, code */
177	KEY(0, 0, KEY_9),
178	KEY(0, 1, KEY_8),
179	KEY(0, 2, KEY_I),
180	KEY(0, 3, KEY_J),
181	KEY(0, 4, KEY_N),
182	KEY(0, 5, KEY_M),
183	KEY(1, 0, KEY_0),
184	KEY(1, 1, KEY_7),
185	KEY(1, 2, KEY_U),
186	KEY(1, 3, KEY_H),
187	KEY(1, 4, KEY_B),
188	KEY(1, 5, KEY_SPACE),
189	KEY(2, 0, KEY_BACKSPACE),
190	KEY(2, 1, KEY_6),
191	KEY(2, 2, KEY_Y),
192	KEY(2, 3, KEY_G),
193	KEY(2, 4, KEY_V),
194	KEY(2, 5, KEY_FN),
195	KEY(3, 0, KEY_O),
196	KEY(3, 1, KEY_5),
197	KEY(3, 2, KEY_T),
198	KEY(3, 3, KEY_F),
199	KEY(3, 4, KEY_C),
200	KEY(4, 0, KEY_P),
201	KEY(4, 1, KEY_4),
202	KEY(4, 2, KEY_R),
203	KEY(4, 3, KEY_D),
204	KEY(4, 4, KEY_X),
205	KEY(5, 0, KEY_K),
206	KEY(5, 1, KEY_3),
207	KEY(5, 2, KEY_E),
208	KEY(5, 3, KEY_S),
209	KEY(5, 4, KEY_Z),
210	KEY(6, 0, KEY_L),
211	KEY(6, 1, KEY_2),
212	KEY(6, 2, KEY_W),
213	KEY(6, 3, KEY_A),
214	KEY(6, 4, KEY_DOT),
215	KEY(7, 0, KEY_ENTER),
216	KEY(7, 1, KEY_1),
217	KEY(7, 2, KEY_Q),
218	KEY(7, 3, KEY_LEFTSHIFT),
219	KEY(7, 4, KEY_COMMA),
220};
221
222static struct matrix_keymap_data board_map_data = {
223	.keymap			= board_keymap,
224	.keymap_size		= ARRAY_SIZE(board_keymap),
225};
226
227static struct twl4030_keypad_data pandora_kp_data = {
228	.keymap_data	= &board_map_data,
229	.rows		= 8,
230	.cols		= 6,
231	.rep		= 1,
232};
233
234static struct connector_atv_platform_data pandora_tv_pdata = {
235	.name = "tv",
236	.source = "venc.0",
237	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
238	.invert_polarity = false,
239};
240
241static struct platform_device pandora_tv_connector_device = {
242	.name                   = "connector-analog-tv",
243	.id                     = 0,
244	.dev.platform_data      = &pandora_tv_pdata,
245};
246
247static struct omap_dss_board_info pandora_dss_data = {
248	.default_display_name = "lcd",
249};
250
251static void pandora_wl1251_init_card(struct mmc_card *card)
252{
253	/*
254	 * We have TI wl1251 attached to MMC3. Pass this information to
255	 * SDIO core because it can't be probed by normal methods.
256	 */
257	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
258	card->cccr.wide_bus = 1;
259	card->cis.vendor = 0x104c;
260	card->cis.device = 0x9066;
261	card->cis.blksize = 512;
262	card->cis.max_dtr = 20000000;
263}
264
265static struct omap2_hsmmc_info omap3pandora_mmc[] = {
266	{
267		.mmc		= 1,
268		.caps		= MMC_CAP_4_BIT_DATA,
269		.gpio_cd	= -EINVAL,
270		.gpio_wp	= 126,
271		.ext_clock	= 0,
272		.deferred	= true,
273	},
274	{
275		.mmc		= 2,
276		.caps		= MMC_CAP_4_BIT_DATA,
277		.gpio_cd	= -EINVAL,
278		.gpio_wp	= 127,
279		.ext_clock	= 1,
280		.transceiver	= true,
281		.deferred	= true,
282	},
283	{
284		.mmc		= 3,
285		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
286		.gpio_cd	= -EINVAL,
287		.gpio_wp	= -EINVAL,
288		.init_card	= pandora_wl1251_init_card,
289	},
290	{}	/* Terminator */
291};
292
293static int omap3pandora_twl_gpio_setup(struct device *dev,
294		unsigned gpio, unsigned ngpio)
295{
296	int ret, gpio_32khz;
297
298	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
299	omap3pandora_mmc[0].gpio_cd = gpio + 0;
300	omap3pandora_mmc[1].gpio_cd = gpio + 1;
301	omap_hsmmc_late_init(omap3pandora_mmc);
302
303	/* gpio + 13 drives 32kHz buffer for wifi module */
304	gpio_32khz = gpio + 13;
305	ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz");
306	if (ret < 0) {
307		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
308		return -ENODEV;
309	}
310
311	return 0;
312}
313
314static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
315	.setup		= omap3pandora_twl_gpio_setup,
316};
317
318static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
319	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
320};
321
322static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
323	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
324};
325
326static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
327	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
328};
329
330static struct regulator_consumer_supply pandora_vdds_supplies[] = {
331	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
332	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
333	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
334	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
335};
336
337static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
338	REGULATOR_SUPPLY("vcc", "spi1.1"),
339};
340
341static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
342	REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"),	/* hsusb port 2 */
343};
344
345/* ads7846 on SPI and 2 nub controllers on I2C */
346static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
347	REGULATOR_SUPPLY("vcc", "spi1.0"),
348	REGULATOR_SUPPLY("vcc", "3-0066"),
349	REGULATOR_SUPPLY("vcc", "3-0067"),
350};
351
352static struct regulator_consumer_supply pandora_adac_supply[] = {
353	REGULATOR_SUPPLY("vcc", "soc-audio"),
354};
355
356/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
357static struct regulator_init_data pandora_vmmc1 = {
358	.constraints = {
359		.min_uV			= 1850000,
360		.max_uV			= 3150000,
361		.valid_modes_mask	= REGULATOR_MODE_NORMAL
362					| REGULATOR_MODE_STANDBY,
363		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
364					| REGULATOR_CHANGE_MODE
365					| REGULATOR_CHANGE_STATUS,
366	},
367	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc1_supply),
368	.consumer_supplies	= pandora_vmmc1_supply,
369};
370
371/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
372static struct regulator_init_data pandora_vmmc2 = {
373	.constraints = {
374		.min_uV			= 1850000,
375		.max_uV			= 3150000,
376		.valid_modes_mask	= REGULATOR_MODE_NORMAL
377					| REGULATOR_MODE_STANDBY,
378		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
379					| REGULATOR_CHANGE_MODE
380					| REGULATOR_CHANGE_STATUS,
381	},
382	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc2_supply),
383	.consumer_supplies	= pandora_vmmc2_supply,
384};
385
386/* VAUX1 for LCD */
387static struct regulator_init_data pandora_vaux1 = {
388	.constraints = {
389		.min_uV			= 3000000,
390		.max_uV			= 3000000,
391		.apply_uV		= true,
392		.valid_modes_mask	= REGULATOR_MODE_NORMAL
393					| REGULATOR_MODE_STANDBY,
394		.valid_ops_mask		= REGULATOR_CHANGE_MODE
395					| REGULATOR_CHANGE_STATUS,
396	},
397	.num_consumer_supplies	= ARRAY_SIZE(pandora_vcc_lcd_supply),
398	.consumer_supplies	= pandora_vcc_lcd_supply,
399};
400
401/* VAUX2 for USB host PHY */
402static struct regulator_init_data pandora_vaux2 = {
403	.constraints = {
404		.min_uV			= 1800000,
405		.max_uV			= 1800000,
406		.apply_uV		= true,
407		.valid_modes_mask	= REGULATOR_MODE_NORMAL
408					| REGULATOR_MODE_STANDBY,
409		.valid_ops_mask		= REGULATOR_CHANGE_MODE
410					| REGULATOR_CHANGE_STATUS,
411	},
412	.num_consumer_supplies	= ARRAY_SIZE(pandora_usb_phy_supply),
413	.consumer_supplies	= pandora_usb_phy_supply,
414};
415
416/* VAUX4 for ads7846 and nubs */
417static struct regulator_init_data pandora_vaux4 = {
418	.constraints = {
419		.min_uV			= 2800000,
420		.max_uV			= 2800000,
421		.apply_uV		= true,
422		.valid_modes_mask	= REGULATOR_MODE_NORMAL
423					| REGULATOR_MODE_STANDBY,
424		.valid_ops_mask		= REGULATOR_CHANGE_MODE
425					| REGULATOR_CHANGE_STATUS,
426	},
427	.num_consumer_supplies	= ARRAY_SIZE(pandora_vaux4_supplies),
428	.consumer_supplies	= pandora_vaux4_supplies,
429};
430
431/* VSIM for audio DAC */
432static struct regulator_init_data pandora_vsim = {
433	.constraints = {
434		.min_uV			= 2800000,
435		.max_uV			= 2800000,
436		.apply_uV		= true,
437		.valid_modes_mask	= REGULATOR_MODE_NORMAL
438					| REGULATOR_MODE_STANDBY,
439		.valid_ops_mask		= REGULATOR_CHANGE_MODE
440					| REGULATOR_CHANGE_STATUS,
441	},
442	.num_consumer_supplies	= ARRAY_SIZE(pandora_adac_supply),
443	.consumer_supplies	= pandora_adac_supply,
444};
445
446/* Fixed regulator internal to Wifi module */
447static struct regulator_init_data pandora_vmmc3 = {
448	.constraints = {
449		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
450	},
451	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
452	.consumer_supplies	= pandora_vmmc3_supply,
453};
454
455static struct fixed_voltage_config pandora_vwlan = {
456	.supply_name		= "vwlan",
457	.microvolts		= 1800000, /* 1.8V */
458	.gpio			= PANDORA_WIFI_NRESET_GPIO,
459	.startup_delay		= 50000, /* 50ms */
460	.enable_high		= 1,
461	.enabled_at_boot	= 0,
462	.init_data		= &pandora_vmmc3,
463};
464
465static struct platform_device pandora_vwlan_device = {
466	.name		= "reg-fixed-voltage",
467	.id		= 1,
468	.dev = {
469		.platform_data = &pandora_vwlan,
470	},
471};
472
473static struct twl4030_bci_platform_data pandora_bci_data;
474
475static struct twl4030_power_data pandora_power_data = {
476	.use_poweroff	= true,
477};
478
479static struct twl4030_platform_data omap3pandora_twldata = {
480	.gpio		= &omap3pandora_gpio_data,
481	.vmmc1		= &pandora_vmmc1,
482	.vmmc2		= &pandora_vmmc2,
483	.vaux1		= &pandora_vaux1,
484	.vaux2		= &pandora_vaux2,
485	.vaux4		= &pandora_vaux4,
486	.vsim		= &pandora_vsim,
487	.keypad		= &pandora_kp_data,
488	.bci		= &pandora_bci_data,
489	.power		= &pandora_power_data,
490};
491
492static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
493	{
494		I2C_BOARD_INFO("bq27500", 0x55),
495		.flags = I2C_CLIENT_WAKE,
496	},
497};
498
499static int __init omap3pandora_i2c_init(void)
500{
501	omap3_pmic_get_config(&omap3pandora_twldata,
502			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
503			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
504
505	omap3pandora_twldata.vdac->constraints.apply_uV = true;
506
507	omap3pandora_twldata.vpll2->constraints.apply_uV = true;
508	omap3pandora_twldata.vpll2->num_consumer_supplies =
509					ARRAY_SIZE(pandora_vdds_supplies);
510	omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
511
512	omap3_pmic_init("tps65950", &omap3pandora_twldata);
513	/* i2c2 pins are not connected */
514	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
515			ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
516	return 0;
517}
518
519static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = {
520	.name                   = "lcd",
521	.source                 = "dpi.0",
522
523	.data_lines		= 24,
524	.nreset_gpio		= 157,
525};
526
527static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
528	{
529		.modalias		= "panel-tpo-td043mtea1",
530		.bus_num		= 1,
531		.chip_select		= 1,
532		.max_speed_hz		= 375000,
533		.platform_data		= &pandora_lcd_pdata,
534	}
535};
536
537static void __init pandora_wl1251_init(void)
538{
539	struct wl1251_platform_data pandora_wl1251_pdata;
540	int ret;
541
542	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
543
544	pandora_wl1251_pdata.power_gpio = -1;
545
546	ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
547	if (ret < 0)
548		goto fail;
549
550	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
551	if (pandora_wl1251_pdata.irq < 0)
552		goto fail_irq;
553
554	pandora_wl1251_pdata.use_eeprom = true;
555	ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
556	if (ret < 0)
557		goto fail_irq;
558
559	return;
560
561fail_irq:
562	gpio_free(PANDORA_WIFI_IRQ_GPIO);
563fail:
564	printk(KERN_ERR "wl1251 board initialisation failed\n");
565}
566
567static struct usbhs_phy_data phy_data[] __initdata = {
568	{
569		.port = 2,
570		.reset_gpio = 16,
571		.vcc_gpio = -EINVAL,
572	},
573};
574
575static struct platform_device *omap3pandora_devices[] __initdata = {
576	&pandora_leds_gpio,
577	&pandora_keys_gpio,
578	&pandora_vwlan_device,
579	&pandora_backlight,
580	&pandora_tv_connector_device,
581};
582
583static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
584	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
585};
586
587#ifdef CONFIG_OMAP_MUX
588static struct omap_board_mux board_mux[] __initdata = {
589	{ .reg_offset = OMAP_MUX_TERMINATOR },
590};
591#endif
592
593static void __init omap3pandora_init(void)
594{
595	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
596	omap_hsmmc_init(omap3pandora_mmc);
597	omap3pandora_i2c_init();
598	pandora_wl1251_init();
599	platform_add_devices(omap3pandora_devices,
600			ARRAY_SIZE(omap3pandora_devices));
601	omap_display_init(&pandora_dss_data);
602	omap_serial_init();
603	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
604				  mt46h32m32lf6_sdrc_params);
605	spi_register_board_info(omap3pandora_spi_board_info,
606			ARRAY_SIZE(omap3pandora_spi_board_info));
607	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
608
609	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
610	usbhs_init(&usbhs_bdata);
611
612	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
613	usb_musb_init(NULL);
614	gpmc_nand_init(&pandora_nand_data, NULL);
615
616	/* Ensure SDRC pins are mux'd for self-refresh */
617	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
618	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
619}
620
621MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
622	.atag_offset	= 0x100,
623	.reserve	= omap_reserve,
624	.map_io		= omap3_map_io,
625	.init_early	= omap35xx_init_early,
626	.init_irq	= omap3_init_irq,
627	.handle_irq	= omap3_intc_handle_irq,
628	.init_machine	= omap3pandora_init,
629	.init_late	= omap35xx_init_late,
630	.init_time	= omap3_sync32k_timer_init,
631	.restart	= omap3xxx_restart,
632MACHINE_END