1#
  2# 3Com Ethernet device configuration
  3#
  4
  5config NET_VENDOR_3COM
  6	bool "3Com devices"
  7	default y
  8	depends on ISA || EISA || PCI || PCMCIA
  9	---help---
 10	  If you have a network (Ethernet) card belonging to this class, say Y
 11	  and read the Ethernet-HOWTO, available from
 12	  <http://www.tldp.org/docs.html#howto>.
 13
 14	  Note that the answer to this question doesn't directly affect the
 15	  kernel: saying N will just cause the configurator to skip all
 16	  the questions about 3Com cards. If you say Y, you will be asked for
 17	  your specific card in the following questions.
 18
 19if NET_VENDOR_3COM
 20
 21config EL3
 22	tristate "3c509/3c579 \"EtherLink III\" support"
 23	depends on (ISA || EISA)
 24	---help---
 25	  If you have a network (Ethernet) card belonging to the 3Com
 26	  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
 27	  from <http://www.tldp.org/docs.html#howto>.
 28
 29	  If your card is not working you may need to use the DOS
 30	  setup disk to disable Plug & Play mode, and to select the default
 31	  media type.
 32
 33	  To compile this driver as a module, choose M here. The module
 34	  will be called 3c509.
 35
 36config 3C515
 37	tristate "3c515 ISA \"Fast EtherLink\""
 38	depends on ISA && ISA_DMA_API
 39	---help---
 40	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
 41	  network card, say Y and read the Ethernet-HOWTO, available from
 42	  <http://www.tldp.org/docs.html#howto>.
 43
 44	  To compile this driver as a module, choose M here. The module
 45	  will be called 3c515.
 46
 47config PCMCIA_3C574
 48	tristate "3Com 3c574 PCMCIA support"
 49	depends on PCMCIA
 50	---help---
 51	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
 52	  (PC-card) Fast Ethernet card to your computer.
 53
 54	  To compile this driver as a module, choose M here: the module will be
 55	  called 3c574_cs.  If unsure, say N.
 56
 57config PCMCIA_3C589
 58	tristate "3Com 3c589 PCMCIA support"
 59	depends on PCMCIA
 60	---help---
 61	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
 62	  (PC-card) Ethernet card to your computer.
 63
 64	  To compile this driver as a module, choose M here: the module will be
 65	  called 3c589_cs.  If unsure, say N.
 66
 67config VORTEX
 68	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
 69	depends on (PCI || EISA) && HAS_IOPORT_MAP
 70	select MII
 71	---help---
 72	  This option enables driver support for a large number of 10Mbps and
 73	  10/100Mbps EISA, PCI and Cardbus 3Com network cards:
 74
 75	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
 76	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
 77	  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
 78	  "Tornado"   (3c905)                                  PCI
 79	  "Hurricane" (3c555/3cSOHO)                           PCI
 80
 81	  If you have such a card, say Y and read the Ethernet-HOWTO,
 82	  available from <http://www.tldp.org/docs.html#howto>. More
 83	  specific information is in
 84	  <file:Documentation/networking/vortex.txt> and in the comments at
 85	  the beginning of <file:drivers/net/ethernet/3com/3c59x.c>.
 86
 87	  To compile this support as a module, choose M here.
 88
 89config TYPHOON
 90	tristate "3cr990 series \"Typhoon\" support"
 91	depends on PCI
 92	select CRC32
 93	---help---
 94	  This option enables driver support for the 3cr990 series of cards:
 95
 96	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
 97	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
 98	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
 99
100	  If you have a network (Ethernet) card of this type, say Y and read
101	  the Ethernet-HOWTO, available from
102	  <http://www.tldp.org/docs.html#howto>.
103
104	  To compile this driver as a module, choose M here. The module
105	  will be called typhoon.
106
107endif # NET_VENDOR_3COM

 1#
 2# 3Com Ethernet device configuration
 3#
 4
 5config NET_VENDOR_3COM
 6	bool "3Com devices"
 7	default y
 8	depends on ISA || EISA || PCI || PCMCIA
 9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 
11
12	  Note that the answer to this question doesn't directly affect the
13	  kernel: saying N will just cause the configurator to skip all
14	  the questions about 3Com cards. If you say Y, you will be asked for
15	  your specific card in the following questions.
16
17if NET_VENDOR_3COM
18
19config EL3
20	tristate "3c509/3c579 \"EtherLink III\" support"
21	depends on (ISA || EISA)
22	---help---
23	  If you have a network (Ethernet) card belonging to the 3Com
24	  EtherLinkIII series, say Y here.
 
25
26	  If your card is not working you may need to use the DOS
27	  setup disk to disable Plug & Play mode, and to select the default
28	  media type.
29
30	  To compile this driver as a module, choose M here. The module
31	  will be called 3c509.
32
33config 3C515
34	tristate "3c515 ISA \"Fast EtherLink\""
35	depends on ISA && ISA_DMA_API
36	---help---
37	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
38	  network card, say Y here.
 
39
40	  To compile this driver as a module, choose M here. The module
41	  will be called 3c515.
42
43config PCMCIA_3C574
44	tristate "3Com 3c574 PCMCIA support"
45	depends on PCMCIA
46	---help---
47	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
48	  (PC-card) Fast Ethernet card to your computer.
49
50	  To compile this driver as a module, choose M here: the module will be
51	  called 3c574_cs.  If unsure, say N.
52
53config PCMCIA_3C589
54	tristate "3Com 3c589 PCMCIA support"
55	depends on PCMCIA
56	---help---
57	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
58	  (PC-card) Ethernet card to your computer.
59
60	  To compile this driver as a module, choose M here: the module will be
61	  called 3c589_cs.  If unsure, say N.
62
63config VORTEX
64	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
65	depends on (PCI || EISA) && HAS_IOPORT_MAP
66	select MII
67	---help---
68	  This option enables driver support for a large number of 10Mbps and
69	  10/100Mbps EISA, PCI and Cardbus 3Com network cards:
70
71	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
72	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
73	  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
74	  "Tornado"   (3c905)                                  PCI
75	  "Hurricane" (3c555/3cSOHO)                           PCI
76
77	  If you have such a card, say Y here.  More specific information is in
 
 
78	  <file:Documentation/networking/vortex.txt> and in the comments at
79	  the beginning of <file:drivers/net/ethernet/3com/3c59x.c>.
80
81	  To compile this support as a module, choose M here.
82
83config TYPHOON
84	tristate "3cr990 series \"Typhoon\" support"
85	depends on PCI
86	select CRC32
87	---help---
88	  This option enables driver support for the 3cr990 series of cards:
89
90	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
91	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
92	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
93
94	  If you have a network (Ethernet) card of this type, say Y here.
 
 
95
96	  To compile this driver as a module, choose M here. The module
97	  will be called typhoon.
98
99endif # NET_VENDOR_3COM