Loading...
1/* linux/drivers/mmc/host/sdhci-s3c.c
2 *
3 * Copyright 2008 Openmoko Inc.
4 * Copyright 2008 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 * http://armlinux.simtec.co.uk/
7 *
8 * SDHCI (HSMMC) support for Samsung SoC
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15#include <linux/delay.h>
16#include <linux/dma-mapping.h>
17#include <linux/platform_device.h>
18#include <linux/platform_data/mmc-sdhci-s3c.h>
19#include <linux/slab.h>
20#include <linux/clk.h>
21#include <linux/io.h>
22#include <linux/gpio.h>
23#include <linux/module.h>
24#include <linux/of.h>
25#include <linux/of_gpio.h>
26#include <linux/pm.h>
27#include <linux/pm_runtime.h>
28
29#include <linux/mmc/host.h>
30
31#include "sdhci-s3c-regs.h"
32#include "sdhci.h"
33
34#define MAX_BUS_CLK (4)
35
36/* Number of gpio's used is max data bus width + command and clock lines */
37#define NUM_GPIOS(x) (x + 2)
38
39/**
40 * struct sdhci_s3c - S3C SDHCI instance
41 * @host: The SDHCI host created
42 * @pdev: The platform device we where created from.
43 * @ioarea: The resource created when we claimed the IO area.
44 * @pdata: The platform data for this controller.
45 * @cur_clk: The index of the current bus clock.
46 * @clk_io: The clock for the internal bus interface.
47 * @clk_bus: The clocks that are available for the SD/MMC bus clock.
48 */
49struct sdhci_s3c {
50 struct sdhci_host *host;
51 struct platform_device *pdev;
52 struct resource *ioarea;
53 struct s3c_sdhci_platdata *pdata;
54 int cur_clk;
55 int ext_cd_irq;
56 int ext_cd_gpio;
57
58 struct clk *clk_io;
59 struct clk *clk_bus[MAX_BUS_CLK];
60 unsigned long clk_rates[MAX_BUS_CLK];
61};
62
63/**
64 * struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data
65 * @sdhci_quirks: sdhci host specific quirks.
66 *
67 * Specifies platform specific configuration of sdhci controller.
68 * Note: A structure for driver specific platform data is used for future
69 * expansion of its usage.
70 */
71struct sdhci_s3c_drv_data {
72 unsigned int sdhci_quirks;
73};
74
75static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
76{
77 return sdhci_priv(host);
78}
79
80/**
81 * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
82 * @host: The SDHCI host instance.
83 *
84 * Callback to return the maximum clock rate acheivable by the controller.
85*/
86static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
87{
88 struct sdhci_s3c *ourhost = to_s3c(host);
89 unsigned long rate, max = 0;
90 int src;
91
92 for (src = 0; src < MAX_BUS_CLK; src++) {
93 rate = ourhost->clk_rates[src];
94 if (rate > max)
95 max = rate;
96 }
97
98 return max;
99}
100
101/**
102 * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
103 * @ourhost: Our SDHCI instance.
104 * @src: The source clock index.
105 * @wanted: The clock frequency wanted.
106 */
107static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
108 unsigned int src,
109 unsigned int wanted)
110{
111 unsigned long rate;
112 struct clk *clksrc = ourhost->clk_bus[src];
113 int shift;
114
115 if (IS_ERR(clksrc))
116 return UINT_MAX;
117
118 /*
119 * If controller uses a non-standard clock division, find the best clock
120 * speed possible with selected clock source and skip the division.
121 */
122 if (ourhost->host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
123 rate = clk_round_rate(clksrc, wanted);
124 return wanted - rate;
125 }
126
127 rate = ourhost->clk_rates[src];
128
129 for (shift = 0; shift <= 8; ++shift) {
130 if ((rate >> shift) <= wanted)
131 break;
132 }
133
134 if (shift > 8) {
135 dev_dbg(&ourhost->pdev->dev,
136 "clk %d: rate %ld, min rate %lu > wanted %u\n",
137 src, rate, rate / 256, wanted);
138 return UINT_MAX;
139 }
140
141 dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
142 src, rate, wanted, rate >> shift);
143
144 return wanted - (rate >> shift);
145}
146
147/**
148 * sdhci_s3c_set_clock - callback on clock change
149 * @host: The SDHCI host being changed
150 * @clock: The clock rate being requested.
151 *
152 * When the card's clock is going to be changed, look at the new frequency
153 * and find the best clock source to go with it.
154*/
155static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
156{
157 struct sdhci_s3c *ourhost = to_s3c(host);
158 unsigned int best = UINT_MAX;
159 unsigned int delta;
160 int best_src = 0;
161 int src;
162 u32 ctrl;
163
164 /* don't bother if the clock is going off. */
165 if (clock == 0)
166 return;
167
168 for (src = 0; src < MAX_BUS_CLK; src++) {
169 delta = sdhci_s3c_consider_clock(ourhost, src, clock);
170 if (delta < best) {
171 best = delta;
172 best_src = src;
173 }
174 }
175
176 dev_dbg(&ourhost->pdev->dev,
177 "selected source %d, clock %d, delta %d\n",
178 best_src, clock, best);
179
180 /* select the new clock source */
181 if (ourhost->cur_clk != best_src) {
182 struct clk *clk = ourhost->clk_bus[best_src];
183
184 clk_prepare_enable(clk);
185 if (ourhost->cur_clk >= 0)
186 clk_disable_unprepare(
187 ourhost->clk_bus[ourhost->cur_clk]);
188
189 ourhost->cur_clk = best_src;
190 host->max_clk = ourhost->clk_rates[best_src];
191 }
192
193 /* turn clock off to card before changing clock source */
194 writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
195
196 ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
197 ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
198 ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
199 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
200
201 /* reprogram default hardware configuration */
202 writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
203 host->ioaddr + S3C64XX_SDHCI_CONTROL4);
204
205 ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
206 ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
207 S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
208 S3C_SDHCI_CTRL2_ENFBCLKRX |
209 S3C_SDHCI_CTRL2_DFCNT_NONE |
210 S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
211 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
212
213 /* reconfigure the controller for new clock rate */
214 ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
215 if (clock < 25 * 1000000)
216 ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
217 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
218}
219
220/**
221 * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
222 * @host: The SDHCI host being queried
223 *
224 * To init mmc host properly a minimal clock value is needed. For high system
225 * bus clock's values the standard formula gives values out of allowed range.
226 * The clock still can be set to lower values, if clock source other then
227 * system bus is selected.
228*/
229static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
230{
231 struct sdhci_s3c *ourhost = to_s3c(host);
232 unsigned long rate, min = ULONG_MAX;
233 int src;
234
235 for (src = 0; src < MAX_BUS_CLK; src++) {
236 rate = ourhost->clk_rates[src] / 256;
237 if (!rate)
238 continue;
239 if (rate < min)
240 min = rate;
241 }
242
243 return min;
244}
245
246/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
247static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
248{
249 struct sdhci_s3c *ourhost = to_s3c(host);
250 unsigned long rate, max = 0;
251 int src;
252
253 for (src = 0; src < MAX_BUS_CLK; src++) {
254 struct clk *clk;
255
256 clk = ourhost->clk_bus[src];
257 if (IS_ERR(clk))
258 continue;
259
260 rate = clk_round_rate(clk, ULONG_MAX);
261 if (rate > max)
262 max = rate;
263 }
264
265 return max;
266}
267
268/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
269static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
270{
271 struct sdhci_s3c *ourhost = to_s3c(host);
272 unsigned long rate, min = ULONG_MAX;
273 int src;
274
275 for (src = 0; src < MAX_BUS_CLK; src++) {
276 struct clk *clk;
277
278 clk = ourhost->clk_bus[src];
279 if (IS_ERR(clk))
280 continue;
281
282 rate = clk_round_rate(clk, 0);
283 if (rate < min)
284 min = rate;
285 }
286
287 return min;
288}
289
290/* sdhci_cmu_set_clock - callback on clock change.*/
291static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
292{
293 struct sdhci_s3c *ourhost = to_s3c(host);
294 struct device *dev = &ourhost->pdev->dev;
295 unsigned long timeout;
296 u16 clk = 0;
297
298 /* If the clock is going off, set to 0 at clock control register */
299 if (clock == 0) {
300 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
301 host->clock = clock;
302 return;
303 }
304
305 sdhci_s3c_set_clock(host, clock);
306
307 clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
308
309 host->clock = clock;
310
311 clk = SDHCI_CLOCK_INT_EN;
312 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
313
314 /* Wait max 20 ms */
315 timeout = 20;
316 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
317 & SDHCI_CLOCK_INT_STABLE)) {
318 if (timeout == 0) {
319 dev_err(dev, "%s: Internal clock never stabilised.\n",
320 mmc_hostname(host->mmc));
321 return;
322 }
323 timeout--;
324 mdelay(1);
325 }
326
327 clk |= SDHCI_CLOCK_CARD_EN;
328 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
329}
330
331/**
332 * sdhci_s3c_platform_bus_width - support 8bit buswidth
333 * @host: The SDHCI host being queried
334 * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
335 *
336 * We have 8-bit width support but is not a v3 controller.
337 * So we add platform_bus_width() and support 8bit width.
338 */
339static int sdhci_s3c_platform_bus_width(struct sdhci_host *host, int width)
340{
341 u8 ctrl;
342
343 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
344
345 switch (width) {
346 case MMC_BUS_WIDTH_8:
347 ctrl |= SDHCI_CTRL_8BITBUS;
348 ctrl &= ~SDHCI_CTRL_4BITBUS;
349 break;
350 case MMC_BUS_WIDTH_4:
351 ctrl |= SDHCI_CTRL_4BITBUS;
352 ctrl &= ~SDHCI_CTRL_8BITBUS;
353 break;
354 default:
355 ctrl &= ~SDHCI_CTRL_4BITBUS;
356 ctrl &= ~SDHCI_CTRL_8BITBUS;
357 break;
358 }
359
360 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
361
362 return 0;
363}
364
365static struct sdhci_ops sdhci_s3c_ops = {
366 .get_max_clock = sdhci_s3c_get_max_clk,
367 .set_clock = sdhci_s3c_set_clock,
368 .get_min_clock = sdhci_s3c_get_min_clock,
369 .platform_bus_width = sdhci_s3c_platform_bus_width,
370};
371
372static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
373{
374 struct sdhci_host *host = platform_get_drvdata(dev);
375#ifdef CONFIG_PM_RUNTIME
376 struct sdhci_s3c *sc = sdhci_priv(host);
377#endif
378 unsigned long flags;
379
380 if (host) {
381 spin_lock_irqsave(&host->lock, flags);
382 if (state) {
383 dev_dbg(&dev->dev, "card inserted.\n");
384#ifdef CONFIG_PM_RUNTIME
385 clk_prepare_enable(sc->clk_io);
386#endif
387 host->flags &= ~SDHCI_DEVICE_DEAD;
388 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
389 } else {
390 dev_dbg(&dev->dev, "card removed.\n");
391 host->flags |= SDHCI_DEVICE_DEAD;
392 host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
393#ifdef CONFIG_PM_RUNTIME
394 clk_disable_unprepare(sc->clk_io);
395#endif
396 }
397 tasklet_schedule(&host->card_tasklet);
398 spin_unlock_irqrestore(&host->lock, flags);
399 }
400}
401
402static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void *dev_id)
403{
404 struct sdhci_s3c *sc = dev_id;
405 int status = gpio_get_value(sc->ext_cd_gpio);
406 if (sc->pdata->ext_cd_gpio_invert)
407 status = !status;
408 sdhci_s3c_notify_change(sc->pdev, status);
409 return IRQ_HANDLED;
410}
411
412static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
413{
414 struct s3c_sdhci_platdata *pdata = sc->pdata;
415 struct device *dev = &sc->pdev->dev;
416
417 if (devm_gpio_request(dev, pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
418 sc->ext_cd_gpio = pdata->ext_cd_gpio;
419 sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
420 if (sc->ext_cd_irq &&
421 request_threaded_irq(sc->ext_cd_irq, NULL,
422 sdhci_s3c_gpio_card_detect_thread,
423 IRQF_TRIGGER_RISING |
424 IRQF_TRIGGER_FALLING |
425 IRQF_ONESHOT,
426 dev_name(dev), sc) == 0) {
427 int status = gpio_get_value(sc->ext_cd_gpio);
428 if (pdata->ext_cd_gpio_invert)
429 status = !status;
430 sdhci_s3c_notify_change(sc->pdev, status);
431 } else {
432 dev_warn(dev, "cannot request irq for card detect\n");
433 sc->ext_cd_irq = 0;
434 }
435 } else {
436 dev_err(dev, "cannot request gpio for card detect\n");
437 }
438}
439
440#ifdef CONFIG_OF
441static int sdhci_s3c_parse_dt(struct device *dev,
442 struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
443{
444 struct device_node *node = dev->of_node;
445 struct sdhci_s3c *ourhost = to_s3c(host);
446 u32 max_width;
447 int gpio;
448
449 /* if the bus-width property is not specified, assume width as 1 */
450 if (of_property_read_u32(node, "bus-width", &max_width))
451 max_width = 1;
452 pdata->max_width = max_width;
453
454 /* get the card detection method */
455 if (of_get_property(node, "broken-cd", NULL)) {
456 pdata->cd_type = S3C_SDHCI_CD_NONE;
457 return 0;
458 }
459
460 if (of_get_property(node, "non-removable", NULL)) {
461 pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
462 return 0;
463 }
464
465 gpio = of_get_named_gpio(node, "cd-gpios", 0);
466 if (gpio_is_valid(gpio)) {
467 pdata->cd_type = S3C_SDHCI_CD_GPIO;
468 pdata->ext_cd_gpio = gpio;
469 ourhost->ext_cd_gpio = -1;
470 if (of_get_property(node, "cd-inverted", NULL))
471 pdata->ext_cd_gpio_invert = 1;
472 return 0;
473 } else if (gpio != -ENOENT) {
474 dev_err(dev, "invalid card detect gpio specified\n");
475 return -EINVAL;
476 }
477
478 /* assuming internal card detect that will be configured by pinctrl */
479 pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
480 return 0;
481}
482#else
483static int sdhci_s3c_parse_dt(struct device *dev,
484 struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
485{
486 return -EINVAL;
487}
488#endif
489
490static const struct of_device_id sdhci_s3c_dt_match[];
491
492static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
493 struct platform_device *pdev)
494{
495#ifdef CONFIG_OF
496 if (pdev->dev.of_node) {
497 const struct of_device_id *match;
498 match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
499 return (struct sdhci_s3c_drv_data *)match->data;
500 }
501#endif
502 return (struct sdhci_s3c_drv_data *)
503 platform_get_device_id(pdev)->driver_data;
504}
505
506static int sdhci_s3c_probe(struct platform_device *pdev)
507{
508 struct s3c_sdhci_platdata *pdata;
509 struct sdhci_s3c_drv_data *drv_data;
510 struct device *dev = &pdev->dev;
511 struct sdhci_host *host;
512 struct sdhci_s3c *sc;
513 struct resource *res;
514 int ret, irq, ptr, clks;
515
516 if (!pdev->dev.platform_data && !pdev->dev.of_node) {
517 dev_err(dev, "no device data specified\n");
518 return -ENOENT;
519 }
520
521 irq = platform_get_irq(pdev, 0);
522 if (irq < 0) {
523 dev_err(dev, "no irq specified\n");
524 return irq;
525 }
526
527 host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
528 if (IS_ERR(host)) {
529 dev_err(dev, "sdhci_alloc_host() failed\n");
530 return PTR_ERR(host);
531 }
532 sc = sdhci_priv(host);
533
534 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
535 if (!pdata) {
536 ret = -ENOMEM;
537 goto err_pdata_io_clk;
538 }
539
540 if (pdev->dev.of_node) {
541 ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
542 if (ret)
543 goto err_pdata_io_clk;
544 } else {
545 memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
546 sc->ext_cd_gpio = -1; /* invalid gpio number */
547 }
548
549 drv_data = sdhci_s3c_get_driver_data(pdev);
550
551 sc->host = host;
552 sc->pdev = pdev;
553 sc->pdata = pdata;
554 sc->cur_clk = -1;
555
556 platform_set_drvdata(pdev, host);
557
558 sc->clk_io = devm_clk_get(dev, "hsmmc");
559 if (IS_ERR(sc->clk_io)) {
560 dev_err(dev, "failed to get io clock\n");
561 ret = PTR_ERR(sc->clk_io);
562 goto err_pdata_io_clk;
563 }
564
565 /* enable the local io clock and keep it running for the moment. */
566 clk_prepare_enable(sc->clk_io);
567
568 for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
569 char name[14];
570
571 snprintf(name, 14, "mmc_busclk.%d", ptr);
572 sc->clk_bus[ptr] = devm_clk_get(dev, name);
573 if (IS_ERR(sc->clk_bus[ptr]))
574 continue;
575
576 clks++;
577 sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
578
579 dev_info(dev, "clock source %d: %s (%ld Hz)\n",
580 ptr, name, sc->clk_rates[ptr]);
581 }
582
583 if (clks == 0) {
584 dev_err(dev, "failed to find any bus clocks\n");
585 ret = -ENOENT;
586 goto err_no_busclks;
587 }
588
589 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
590 host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
591 if (IS_ERR(host->ioaddr)) {
592 ret = PTR_ERR(host->ioaddr);
593 goto err_req_regs;
594 }
595
596 /* Ensure we have minimal gpio selected CMD/CLK/Detect */
597 if (pdata->cfg_gpio)
598 pdata->cfg_gpio(pdev, pdata->max_width);
599
600 host->hw_name = "samsung-hsmmc";
601 host->ops = &sdhci_s3c_ops;
602 host->quirks = 0;
603 host->quirks2 = 0;
604 host->irq = irq;
605
606 /* Setup quirks for the controller */
607 host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
608 host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
609 if (drv_data)
610 host->quirks |= drv_data->sdhci_quirks;
611
612#ifndef CONFIG_MMC_SDHCI_S3C_DMA
613
614 /* we currently see overruns on errors, so disable the SDMA
615 * support as well. */
616 host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
617
618#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
619
620 /* It seems we do not get an DATA transfer complete on non-busy
621 * transfers, not sure if this is a problem with this specific
622 * SDHCI block, or a missing configuration that needs to be set. */
623 host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
624
625 /* This host supports the Auto CMD12 */
626 host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
627
628 /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
629 host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
630
631 if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
632 pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
633 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
634
635 if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
636 host->mmc->caps = MMC_CAP_NONREMOVABLE;
637
638 switch (pdata->max_width) {
639 case 8:
640 host->mmc->caps |= MMC_CAP_8_BIT_DATA;
641 case 4:
642 host->mmc->caps |= MMC_CAP_4_BIT_DATA;
643 break;
644 }
645
646 if (pdata->pm_caps)
647 host->mmc->pm_caps |= pdata->pm_caps;
648
649 host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
650 SDHCI_QUIRK_32BIT_DMA_SIZE);
651
652 /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
653 host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
654
655 /*
656 * If controller does not have internal clock divider,
657 * we can use overriding functions instead of default.
658 */
659 if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
660 sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
661 sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
662 sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
663 }
664
665 /* It supports additional host capabilities if needed */
666 if (pdata->host_caps)
667 host->mmc->caps |= pdata->host_caps;
668
669 if (pdata->host_caps2)
670 host->mmc->caps2 |= pdata->host_caps2;
671
672 pm_runtime_enable(&pdev->dev);
673 pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
674 pm_runtime_use_autosuspend(&pdev->dev);
675 pm_suspend_ignore_children(&pdev->dev, 1);
676
677 ret = sdhci_add_host(host);
678 if (ret) {
679 dev_err(dev, "sdhci_add_host() failed\n");
680 pm_runtime_forbid(&pdev->dev);
681 pm_runtime_get_noresume(&pdev->dev);
682 goto err_req_regs;
683 }
684
685 /* The following two methods of card detection might call
686 sdhci_s3c_notify_change() immediately, so they can be called
687 only after sdhci_add_host(). Setup errors are ignored. */
688 if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
689 pdata->ext_cd_init(&sdhci_s3c_notify_change);
690 if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
691 gpio_is_valid(pdata->ext_cd_gpio))
692 sdhci_s3c_setup_card_detect_gpio(sc);
693
694#ifdef CONFIG_PM_RUNTIME
695 if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
696 clk_disable_unprepare(sc->clk_io);
697#endif
698 return 0;
699
700 err_req_regs:
701 err_no_busclks:
702 clk_disable_unprepare(sc->clk_io);
703
704 err_pdata_io_clk:
705 sdhci_free_host(host);
706
707 return ret;
708}
709
710static int sdhci_s3c_remove(struct platform_device *pdev)
711{
712 struct sdhci_host *host = platform_get_drvdata(pdev);
713 struct sdhci_s3c *sc = sdhci_priv(host);
714 struct s3c_sdhci_platdata *pdata = sc->pdata;
715
716 if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
717 pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
718
719 if (sc->ext_cd_irq)
720 free_irq(sc->ext_cd_irq, sc);
721
722#ifdef CONFIG_PM_RUNTIME
723 if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
724 clk_prepare_enable(sc->clk_io);
725#endif
726 sdhci_remove_host(host, 1);
727
728 pm_runtime_dont_use_autosuspend(&pdev->dev);
729 pm_runtime_disable(&pdev->dev);
730
731 clk_disable_unprepare(sc->clk_io);
732
733 sdhci_free_host(host);
734
735 return 0;
736}
737
738#ifdef CONFIG_PM_SLEEP
739static int sdhci_s3c_suspend(struct device *dev)
740{
741 struct sdhci_host *host = dev_get_drvdata(dev);
742
743 return sdhci_suspend_host(host);
744}
745
746static int sdhci_s3c_resume(struct device *dev)
747{
748 struct sdhci_host *host = dev_get_drvdata(dev);
749
750 return sdhci_resume_host(host);
751}
752#endif
753
754#ifdef CONFIG_PM_RUNTIME
755static int sdhci_s3c_runtime_suspend(struct device *dev)
756{
757 struct sdhci_host *host = dev_get_drvdata(dev);
758 struct sdhci_s3c *ourhost = to_s3c(host);
759 struct clk *busclk = ourhost->clk_io;
760 int ret;
761
762 ret = sdhci_runtime_suspend_host(host);
763
764 if (ourhost->cur_clk >= 0)
765 clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
766 clk_disable_unprepare(busclk);
767 return ret;
768}
769
770static int sdhci_s3c_runtime_resume(struct device *dev)
771{
772 struct sdhci_host *host = dev_get_drvdata(dev);
773 struct sdhci_s3c *ourhost = to_s3c(host);
774 struct clk *busclk = ourhost->clk_io;
775 int ret;
776
777 clk_prepare_enable(busclk);
778 if (ourhost->cur_clk >= 0)
779 clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
780 ret = sdhci_runtime_resume_host(host);
781 return ret;
782}
783#endif
784
785#ifdef CONFIG_PM
786static const struct dev_pm_ops sdhci_s3c_pmops = {
787 SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
788 SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
789 NULL)
790};
791
792#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
793
794#else
795#define SDHCI_S3C_PMOPS NULL
796#endif
797
798#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
799static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
800 .sdhci_quirks = SDHCI_QUIRK_NONSTANDARD_CLOCK,
801};
802#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)&exynos4_sdhci_drv_data)
803#else
804#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)NULL)
805#endif
806
807static struct platform_device_id sdhci_s3c_driver_ids[] = {
808 {
809 .name = "s3c-sdhci",
810 .driver_data = (kernel_ulong_t)NULL,
811 }, {
812 .name = "exynos4-sdhci",
813 .driver_data = EXYNOS4_SDHCI_DRV_DATA,
814 },
815 { }
816};
817MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
818
819#ifdef CONFIG_OF
820static const struct of_device_id sdhci_s3c_dt_match[] = {
821 { .compatible = "samsung,s3c6410-sdhci", },
822 { .compatible = "samsung,exynos4210-sdhci",
823 .data = (void *)EXYNOS4_SDHCI_DRV_DATA },
824 {},
825};
826MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
827#endif
828
829static struct platform_driver sdhci_s3c_driver = {
830 .probe = sdhci_s3c_probe,
831 .remove = sdhci_s3c_remove,
832 .id_table = sdhci_s3c_driver_ids,
833 .driver = {
834 .owner = THIS_MODULE,
835 .name = "s3c-sdhci",
836 .of_match_table = of_match_ptr(sdhci_s3c_dt_match),
837 .pm = SDHCI_S3C_PMOPS,
838 },
839};
840
841module_platform_driver(sdhci_s3c_driver);
842
843MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
844MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
845MODULE_LICENSE("GPL v2");
846MODULE_ALIAS("platform:s3c-sdhci");
1/* linux/drivers/mmc/host/sdhci-s3c.c
2 *
3 * Copyright 2008 Openmoko Inc.
4 * Copyright 2008 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 * http://armlinux.simtec.co.uk/
7 *
8 * SDHCI (HSMMC) support for Samsung SoC
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15#include <linux/spinlock.h>
16#include <linux/delay.h>
17#include <linux/dma-mapping.h>
18#include <linux/platform_device.h>
19#include <linux/platform_data/mmc-sdhci-s3c.h>
20#include <linux/slab.h>
21#include <linux/clk.h>
22#include <linux/io.h>
23#include <linux/gpio.h>
24#include <linux/module.h>
25#include <linux/of.h>
26#include <linux/of_gpio.h>
27#include <linux/pm.h>
28#include <linux/pm_runtime.h>
29
30#include <linux/mmc/host.h>
31
32#include "sdhci.h"
33
34#define MAX_BUS_CLK (4)
35
36#define S3C_SDHCI_CONTROL2 (0x80)
37#define S3C_SDHCI_CONTROL3 (0x84)
38#define S3C64XX_SDHCI_CONTROL4 (0x8C)
39
40#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR BIT(31)
41#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK BIT(30)
42#define S3C_SDHCI_CTRL2_CDINVRXD3 BIT(29)
43#define S3C_SDHCI_CTRL2_SLCARDOUT BIT(28)
44
45#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24)
46#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24)
47#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24)
48
49#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16)
50#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16)
51#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16)
52
53#define S3C_SDHCI_CTRL2_ENFBCLKTX BIT(15)
54#define S3C_SDHCI_CTRL2_ENFBCLKRX BIT(14)
55#define S3C_SDHCI_CTRL2_SDCDSEL BIT(13)
56#define S3C_SDHCI_CTRL2_SDSIGPC BIT(12)
57#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART BIT(11)
58
59#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9)
60#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9)
61#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9)
62#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9)
63#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9)
64#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9)
65
66#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD BIT(8)
67#define S3C_SDHCI_CTRL2_RWAITMODE BIT(7)
68#define S3C_SDHCI_CTRL2_DISBUFRD BIT(6)
69
70#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4)
71#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4)
72#define S3C_SDHCI_CTRL2_PWRSYNC BIT(3)
73#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON BIT(1)
74#define S3C_SDHCI_CTRL2_HWINITFIN BIT(0)
75
76#define S3C_SDHCI_CTRL3_FCSEL3 BIT(31)
77#define S3C_SDHCI_CTRL3_FCSEL2 BIT(23)
78#define S3C_SDHCI_CTRL3_FCSEL1 BIT(15)
79#define S3C_SDHCI_CTRL3_FCSEL0 BIT(7)
80
81#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24)
82#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24)
83#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24)
84
85#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16)
86#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16)
87#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16)
88
89#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8)
90#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8)
91#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8)
92
93#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0)
94#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0)
95#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0)
96
97#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16)
98#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16)
99#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16)
100#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16)
101#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16)
102#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16)
103
104#define S3C64XX_SDHCI_CONTROL4_BUSY (1)
105
106/**
107 * struct sdhci_s3c - S3C SDHCI instance
108 * @host: The SDHCI host created
109 * @pdev: The platform device we where created from.
110 * @ioarea: The resource created when we claimed the IO area.
111 * @pdata: The platform data for this controller.
112 * @cur_clk: The index of the current bus clock.
113 * @clk_io: The clock for the internal bus interface.
114 * @clk_bus: The clocks that are available for the SD/MMC bus clock.
115 */
116struct sdhci_s3c {
117 struct sdhci_host *host;
118 struct platform_device *pdev;
119 struct resource *ioarea;
120 struct s3c_sdhci_platdata *pdata;
121 int cur_clk;
122 int ext_cd_irq;
123 int ext_cd_gpio;
124
125 struct clk *clk_io;
126 struct clk *clk_bus[MAX_BUS_CLK];
127 unsigned long clk_rates[MAX_BUS_CLK];
128
129 bool no_divider;
130};
131
132/**
133 * struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data
134 * @sdhci_quirks: sdhci host specific quirks.
135 *
136 * Specifies platform specific configuration of sdhci controller.
137 * Note: A structure for driver specific platform data is used for future
138 * expansion of its usage.
139 */
140struct sdhci_s3c_drv_data {
141 unsigned int sdhci_quirks;
142 bool no_divider;
143};
144
145static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
146{
147 return sdhci_priv(host);
148}
149
150/**
151 * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
152 * @host: The SDHCI host instance.
153 *
154 * Callback to return the maximum clock rate acheivable by the controller.
155*/
156static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
157{
158 struct sdhci_s3c *ourhost = to_s3c(host);
159 unsigned long rate, max = 0;
160 int src;
161
162 for (src = 0; src < MAX_BUS_CLK; src++) {
163 rate = ourhost->clk_rates[src];
164 if (rate > max)
165 max = rate;
166 }
167
168 return max;
169}
170
171/**
172 * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
173 * @ourhost: Our SDHCI instance.
174 * @src: The source clock index.
175 * @wanted: The clock frequency wanted.
176 */
177static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
178 unsigned int src,
179 unsigned int wanted)
180{
181 unsigned long rate;
182 struct clk *clksrc = ourhost->clk_bus[src];
183 int shift;
184
185 if (IS_ERR(clksrc))
186 return UINT_MAX;
187
188 /*
189 * If controller uses a non-standard clock division, find the best clock
190 * speed possible with selected clock source and skip the division.
191 */
192 if (ourhost->no_divider) {
193 rate = clk_round_rate(clksrc, wanted);
194 return wanted - rate;
195 }
196
197 rate = ourhost->clk_rates[src];
198
199 for (shift = 0; shift <= 8; ++shift) {
200 if ((rate >> shift) <= wanted)
201 break;
202 }
203
204 if (shift > 8) {
205 dev_dbg(&ourhost->pdev->dev,
206 "clk %d: rate %ld, min rate %lu > wanted %u\n",
207 src, rate, rate / 256, wanted);
208 return UINT_MAX;
209 }
210
211 dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
212 src, rate, wanted, rate >> shift);
213
214 return wanted - (rate >> shift);
215}
216
217/**
218 * sdhci_s3c_set_clock - callback on clock change
219 * @host: The SDHCI host being changed
220 * @clock: The clock rate being requested.
221 *
222 * When the card's clock is going to be changed, look at the new frequency
223 * and find the best clock source to go with it.
224*/
225static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
226{
227 struct sdhci_s3c *ourhost = to_s3c(host);
228 unsigned int best = UINT_MAX;
229 unsigned int delta;
230 int best_src = 0;
231 int src;
232 u32 ctrl;
233
234 host->mmc->actual_clock = 0;
235
236 /* don't bother if the clock is going off. */
237 if (clock == 0) {
238 sdhci_set_clock(host, clock);
239 return;
240 }
241
242 for (src = 0; src < MAX_BUS_CLK; src++) {
243 delta = sdhci_s3c_consider_clock(ourhost, src, clock);
244 if (delta < best) {
245 best = delta;
246 best_src = src;
247 }
248 }
249
250 dev_dbg(&ourhost->pdev->dev,
251 "selected source %d, clock %d, delta %d\n",
252 best_src, clock, best);
253
254 /* select the new clock source */
255 if (ourhost->cur_clk != best_src) {
256 struct clk *clk = ourhost->clk_bus[best_src];
257
258 clk_prepare_enable(clk);
259 if (ourhost->cur_clk >= 0)
260 clk_disable_unprepare(
261 ourhost->clk_bus[ourhost->cur_clk]);
262
263 ourhost->cur_clk = best_src;
264 host->max_clk = ourhost->clk_rates[best_src];
265 }
266
267 /* turn clock off to card before changing clock source */
268 writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
269
270 ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
271 ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
272 ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
273 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
274
275 /* reprogram default hardware configuration */
276 writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
277 host->ioaddr + S3C64XX_SDHCI_CONTROL4);
278
279 ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
280 ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
281 S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
282 S3C_SDHCI_CTRL2_ENFBCLKRX |
283 S3C_SDHCI_CTRL2_DFCNT_NONE |
284 S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
285 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
286
287 /* reconfigure the controller for new clock rate */
288 ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
289 if (clock < 25 * 1000000)
290 ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
291 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
292
293 sdhci_set_clock(host, clock);
294}
295
296/**
297 * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
298 * @host: The SDHCI host being queried
299 *
300 * To init mmc host properly a minimal clock value is needed. For high system
301 * bus clock's values the standard formula gives values out of allowed range.
302 * The clock still can be set to lower values, if clock source other then
303 * system bus is selected.
304*/
305static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
306{
307 struct sdhci_s3c *ourhost = to_s3c(host);
308 unsigned long rate, min = ULONG_MAX;
309 int src;
310
311 for (src = 0; src < MAX_BUS_CLK; src++) {
312 rate = ourhost->clk_rates[src] / 256;
313 if (!rate)
314 continue;
315 if (rate < min)
316 min = rate;
317 }
318
319 return min;
320}
321
322/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
323static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
324{
325 struct sdhci_s3c *ourhost = to_s3c(host);
326 unsigned long rate, max = 0;
327 int src;
328
329 for (src = 0; src < MAX_BUS_CLK; src++) {
330 struct clk *clk;
331
332 clk = ourhost->clk_bus[src];
333 if (IS_ERR(clk))
334 continue;
335
336 rate = clk_round_rate(clk, ULONG_MAX);
337 if (rate > max)
338 max = rate;
339 }
340
341 return max;
342}
343
344/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
345static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
346{
347 struct sdhci_s3c *ourhost = to_s3c(host);
348 unsigned long rate, min = ULONG_MAX;
349 int src;
350
351 for (src = 0; src < MAX_BUS_CLK; src++) {
352 struct clk *clk;
353
354 clk = ourhost->clk_bus[src];
355 if (IS_ERR(clk))
356 continue;
357
358 rate = clk_round_rate(clk, 0);
359 if (rate < min)
360 min = rate;
361 }
362
363 return min;
364}
365
366/* sdhci_cmu_set_clock - callback on clock change.*/
367static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
368{
369 struct sdhci_s3c *ourhost = to_s3c(host);
370 struct device *dev = &ourhost->pdev->dev;
371 unsigned long timeout;
372 u16 clk = 0;
373 int ret;
374
375 host->mmc->actual_clock = 0;
376
377 /* If the clock is going off, set to 0 at clock control register */
378 if (clock == 0) {
379 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
380 return;
381 }
382
383 sdhci_s3c_set_clock(host, clock);
384
385 /* Reset SD Clock Enable */
386 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
387 clk &= ~SDHCI_CLOCK_CARD_EN;
388 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
389
390 ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
391 if (ret != 0) {
392 dev_err(dev, "%s: failed to set clock rate %uHz\n",
393 mmc_hostname(host->mmc), clock);
394 return;
395 }
396
397 clk = SDHCI_CLOCK_INT_EN;
398 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
399
400 /* Wait max 20 ms */
401 timeout = 20;
402 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
403 & SDHCI_CLOCK_INT_STABLE)) {
404 if (timeout == 0) {
405 dev_err(dev, "%s: Internal clock never stabilised.\n",
406 mmc_hostname(host->mmc));
407 return;
408 }
409 timeout--;
410 mdelay(1);
411 }
412
413 clk |= SDHCI_CLOCK_CARD_EN;
414 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
415}
416
417static struct sdhci_ops sdhci_s3c_ops = {
418 .get_max_clock = sdhci_s3c_get_max_clk,
419 .set_clock = sdhci_s3c_set_clock,
420 .get_min_clock = sdhci_s3c_get_min_clock,
421 .set_bus_width = sdhci_set_bus_width,
422 .reset = sdhci_reset,
423 .set_uhs_signaling = sdhci_set_uhs_signaling,
424};
425
426#ifdef CONFIG_OF
427static int sdhci_s3c_parse_dt(struct device *dev,
428 struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
429{
430 struct device_node *node = dev->of_node;
431 u32 max_width;
432
433 /* if the bus-width property is not specified, assume width as 1 */
434 if (of_property_read_u32(node, "bus-width", &max_width))
435 max_width = 1;
436 pdata->max_width = max_width;
437
438 /* get the card detection method */
439 if (of_get_property(node, "broken-cd", NULL)) {
440 pdata->cd_type = S3C_SDHCI_CD_NONE;
441 return 0;
442 }
443
444 if (of_get_property(node, "non-removable", NULL)) {
445 pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
446 return 0;
447 }
448
449 if (of_get_named_gpio(node, "cd-gpios", 0))
450 return 0;
451
452 /* assuming internal card detect that will be configured by pinctrl */
453 pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
454 return 0;
455}
456#else
457static int sdhci_s3c_parse_dt(struct device *dev,
458 struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
459{
460 return -EINVAL;
461}
462#endif
463
464static const struct of_device_id sdhci_s3c_dt_match[];
465
466static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
467 struct platform_device *pdev)
468{
469#ifdef CONFIG_OF
470 if (pdev->dev.of_node) {
471 const struct of_device_id *match;
472 match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
473 return (struct sdhci_s3c_drv_data *)match->data;
474 }
475#endif
476 return (struct sdhci_s3c_drv_data *)
477 platform_get_device_id(pdev)->driver_data;
478}
479
480static int sdhci_s3c_probe(struct platform_device *pdev)
481{
482 struct s3c_sdhci_platdata *pdata;
483 struct sdhci_s3c_drv_data *drv_data;
484 struct device *dev = &pdev->dev;
485 struct sdhci_host *host;
486 struct sdhci_s3c *sc;
487 struct resource *res;
488 int ret, irq, ptr, clks;
489
490 if (!pdev->dev.platform_data && !pdev->dev.of_node) {
491 dev_err(dev, "no device data specified\n");
492 return -ENOENT;
493 }
494
495 irq = platform_get_irq(pdev, 0);
496 if (irq < 0) {
497 dev_err(dev, "no irq specified\n");
498 return irq;
499 }
500
501 host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
502 if (IS_ERR(host)) {
503 dev_err(dev, "sdhci_alloc_host() failed\n");
504 return PTR_ERR(host);
505 }
506 sc = sdhci_priv(host);
507
508 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
509 if (!pdata) {
510 ret = -ENOMEM;
511 goto err_pdata_io_clk;
512 }
513
514 if (pdev->dev.of_node) {
515 ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
516 if (ret)
517 goto err_pdata_io_clk;
518 } else {
519 memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
520 sc->ext_cd_gpio = -1; /* invalid gpio number */
521 }
522
523 drv_data = sdhci_s3c_get_driver_data(pdev);
524
525 sc->host = host;
526 sc->pdev = pdev;
527 sc->pdata = pdata;
528 sc->cur_clk = -1;
529
530 platform_set_drvdata(pdev, host);
531
532 sc->clk_io = devm_clk_get(dev, "hsmmc");
533 if (IS_ERR(sc->clk_io)) {
534 dev_err(dev, "failed to get io clock\n");
535 ret = PTR_ERR(sc->clk_io);
536 goto err_pdata_io_clk;
537 }
538
539 /* enable the local io clock and keep it running for the moment. */
540 clk_prepare_enable(sc->clk_io);
541
542 for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
543 char name[14];
544
545 snprintf(name, 14, "mmc_busclk.%d", ptr);
546 sc->clk_bus[ptr] = devm_clk_get(dev, name);
547 if (IS_ERR(sc->clk_bus[ptr]))
548 continue;
549
550 clks++;
551 sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
552
553 dev_info(dev, "clock source %d: %s (%ld Hz)\n",
554 ptr, name, sc->clk_rates[ptr]);
555 }
556
557 if (clks == 0) {
558 dev_err(dev, "failed to find any bus clocks\n");
559 ret = -ENOENT;
560 goto err_no_busclks;
561 }
562
563 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
564 host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
565 if (IS_ERR(host->ioaddr)) {
566 ret = PTR_ERR(host->ioaddr);
567 goto err_req_regs;
568 }
569
570 /* Ensure we have minimal gpio selected CMD/CLK/Detect */
571 if (pdata->cfg_gpio)
572 pdata->cfg_gpio(pdev, pdata->max_width);
573
574 host->hw_name = "samsung-hsmmc";
575 host->ops = &sdhci_s3c_ops;
576 host->quirks = 0;
577 host->quirks2 = 0;
578 host->irq = irq;
579
580 /* Setup quirks for the controller */
581 host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
582 host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
583 if (drv_data) {
584 host->quirks |= drv_data->sdhci_quirks;
585 sc->no_divider = drv_data->no_divider;
586 }
587
588#ifndef CONFIG_MMC_SDHCI_S3C_DMA
589
590 /* we currently see overruns on errors, so disable the SDMA
591 * support as well. */
592 host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
593
594#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
595
596 /* It seems we do not get an DATA transfer complete on non-busy
597 * transfers, not sure if this is a problem with this specific
598 * SDHCI block, or a missing configuration that needs to be set. */
599 host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
600
601 /* This host supports the Auto CMD12 */
602 host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
603
604 /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
605 host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
606
607 if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
608 pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
609 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
610
611 if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
612 host->mmc->caps = MMC_CAP_NONREMOVABLE;
613
614 switch (pdata->max_width) {
615 case 8:
616 host->mmc->caps |= MMC_CAP_8_BIT_DATA;
617 case 4:
618 host->mmc->caps |= MMC_CAP_4_BIT_DATA;
619 break;
620 }
621
622 if (pdata->pm_caps)
623 host->mmc->pm_caps |= pdata->pm_caps;
624
625 host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
626 SDHCI_QUIRK_32BIT_DMA_SIZE);
627
628 /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
629 host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
630
631 /*
632 * If controller does not have internal clock divider,
633 * we can use overriding functions instead of default.
634 */
635 if (sc->no_divider) {
636 sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
637 sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
638 sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
639 }
640
641 /* It supports additional host capabilities if needed */
642 if (pdata->host_caps)
643 host->mmc->caps |= pdata->host_caps;
644
645 if (pdata->host_caps2)
646 host->mmc->caps2 |= pdata->host_caps2;
647
648 pm_runtime_enable(&pdev->dev);
649 pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
650 pm_runtime_use_autosuspend(&pdev->dev);
651 pm_suspend_ignore_children(&pdev->dev, 1);
652
653 ret = mmc_of_parse(host->mmc);
654 if (ret)
655 goto err_req_regs;
656
657 ret = sdhci_add_host(host);
658 if (ret) {
659 dev_err(dev, "sdhci_add_host() failed\n");
660 goto err_req_regs;
661 }
662
663#ifdef CONFIG_PM
664 if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
665 clk_disable_unprepare(sc->clk_io);
666#endif
667 return 0;
668
669 err_req_regs:
670 pm_runtime_disable(&pdev->dev);
671
672 err_no_busclks:
673 clk_disable_unprepare(sc->clk_io);
674
675 err_pdata_io_clk:
676 sdhci_free_host(host);
677
678 return ret;
679}
680
681static int sdhci_s3c_remove(struct platform_device *pdev)
682{
683 struct sdhci_host *host = platform_get_drvdata(pdev);
684 struct sdhci_s3c *sc = sdhci_priv(host);
685
686 if (sc->ext_cd_irq)
687 free_irq(sc->ext_cd_irq, sc);
688
689#ifdef CONFIG_PM
690 if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
691 clk_prepare_enable(sc->clk_io);
692#endif
693 sdhci_remove_host(host, 1);
694
695 pm_runtime_dont_use_autosuspend(&pdev->dev);
696 pm_runtime_disable(&pdev->dev);
697
698 clk_disable_unprepare(sc->clk_io);
699
700 sdhci_free_host(host);
701
702 return 0;
703}
704
705#ifdef CONFIG_PM_SLEEP
706static int sdhci_s3c_suspend(struct device *dev)
707{
708 struct sdhci_host *host = dev_get_drvdata(dev);
709
710 if (host->tuning_mode != SDHCI_TUNING_MODE_3)
711 mmc_retune_needed(host->mmc);
712
713 return sdhci_suspend_host(host);
714}
715
716static int sdhci_s3c_resume(struct device *dev)
717{
718 struct sdhci_host *host = dev_get_drvdata(dev);
719
720 return sdhci_resume_host(host);
721}
722#endif
723
724#ifdef CONFIG_PM
725static int sdhci_s3c_runtime_suspend(struct device *dev)
726{
727 struct sdhci_host *host = dev_get_drvdata(dev);
728 struct sdhci_s3c *ourhost = to_s3c(host);
729 struct clk *busclk = ourhost->clk_io;
730 int ret;
731
732 ret = sdhci_runtime_suspend_host(host);
733
734 if (host->tuning_mode != SDHCI_TUNING_MODE_3)
735 mmc_retune_needed(host->mmc);
736
737 if (ourhost->cur_clk >= 0)
738 clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
739 clk_disable_unprepare(busclk);
740 return ret;
741}
742
743static int sdhci_s3c_runtime_resume(struct device *dev)
744{
745 struct sdhci_host *host = dev_get_drvdata(dev);
746 struct sdhci_s3c *ourhost = to_s3c(host);
747 struct clk *busclk = ourhost->clk_io;
748 int ret;
749
750 clk_prepare_enable(busclk);
751 if (ourhost->cur_clk >= 0)
752 clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
753 ret = sdhci_runtime_resume_host(host);
754 return ret;
755}
756#endif
757
758static const struct dev_pm_ops sdhci_s3c_pmops = {
759 SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
760 SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
761 NULL)
762};
763
764static const struct platform_device_id sdhci_s3c_driver_ids[] = {
765 {
766 .name = "s3c-sdhci",
767 .driver_data = (kernel_ulong_t)NULL,
768 },
769 { }
770};
771MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
772
773#ifdef CONFIG_OF
774static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
775 .no_divider = true,
776};
777
778static const struct of_device_id sdhci_s3c_dt_match[] = {
779 { .compatible = "samsung,s3c6410-sdhci", },
780 { .compatible = "samsung,exynos4210-sdhci",
781 .data = &exynos4_sdhci_drv_data },
782 {},
783};
784MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
785#endif
786
787static struct platform_driver sdhci_s3c_driver = {
788 .probe = sdhci_s3c_probe,
789 .remove = sdhci_s3c_remove,
790 .id_table = sdhci_s3c_driver_ids,
791 .driver = {
792 .name = "s3c-sdhci",
793 .of_match_table = of_match_ptr(sdhci_s3c_dt_match),
794 .pm = &sdhci_s3c_pmops,
795 },
796};
797
798module_platform_driver(sdhci_s3c_driver);
799
800MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
801MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
802MODULE_LICENSE("GPL v2");
803MODULE_ALIAS("platform:s3c-sdhci");