Loading...
1/*
2 * drivers/base/dd.c - The core device/driver interactions.
3 *
4 * This file contains the (sometimes tricky) code that controls the
5 * interactions between devices and drivers, which primarily includes
6 * driver binding and unbinding.
7 *
8 * All of this code used to exist in drivers/base/bus.c, but was
9 * relocated to here in the name of compartmentalization (since it wasn't
10 * strictly code just for the 'struct bus_type'.
11 *
12 * Copyright (c) 2002-5 Patrick Mochel
13 * Copyright (c) 2002-3 Open Source Development Labs
14 * Copyright (c) 2007-2009 Greg Kroah-Hartman <gregkh@suse.de>
15 * Copyright (c) 2007-2009 Novell Inc.
16 *
17 * This file is released under the GPLv2
18 */
19
20#include <linux/device.h>
21#include <linux/delay.h>
22#include <linux/module.h>
23#include <linux/kthread.h>
24#include <linux/wait.h>
25#include <linux/async.h>
26#include <linux/pm_runtime.h>
27#include <linux/pinctrl/devinfo.h>
28
29#include "base.h"
30#include "power/power.h"
31
32/*
33 * Deferred Probe infrastructure.
34 *
35 * Sometimes driver probe order matters, but the kernel doesn't always have
36 * dependency information which means some drivers will get probed before a
37 * resource it depends on is available. For example, an SDHCI driver may
38 * first need a GPIO line from an i2c GPIO controller before it can be
39 * initialized. If a required resource is not available yet, a driver can
40 * request probing to be deferred by returning -EPROBE_DEFER from its probe hook
41 *
42 * Deferred probe maintains two lists of devices, a pending list and an active
43 * list. A driver returning -EPROBE_DEFER causes the device to be added to the
44 * pending list. A successful driver probe will trigger moving all devices
45 * from the pending to the active list so that the workqueue will eventually
46 * retry them.
47 *
48 * The deferred_probe_mutex must be held any time the deferred_probe_*_list
49 * of the (struct device*)->p->deferred_probe pointers are manipulated
50 */
51static DEFINE_MUTEX(deferred_probe_mutex);
52static LIST_HEAD(deferred_probe_pending_list);
53static LIST_HEAD(deferred_probe_active_list);
54static struct workqueue_struct *deferred_wq;
55static atomic_t deferred_trigger_count = ATOMIC_INIT(0);
56
57/**
58 * deferred_probe_work_func() - Retry probing devices in the active list.
59 */
60static void deferred_probe_work_func(struct work_struct *work)
61{
62 struct device *dev;
63 struct device_private *private;
64 /*
65 * This block processes every device in the deferred 'active' list.
66 * Each device is removed from the active list and passed to
67 * bus_probe_device() to re-attempt the probe. The loop continues
68 * until every device in the active list is removed and retried.
69 *
70 * Note: Once the device is removed from the list and the mutex is
71 * released, it is possible for the device get freed by another thread
72 * and cause a illegal pointer dereference. This code uses
73 * get/put_device() to ensure the device structure cannot disappear
74 * from under our feet.
75 */
76 mutex_lock(&deferred_probe_mutex);
77 while (!list_empty(&deferred_probe_active_list)) {
78 private = list_first_entry(&deferred_probe_active_list,
79 typeof(*dev->p), deferred_probe);
80 dev = private->device;
81 list_del_init(&private->deferred_probe);
82
83 get_device(dev);
84
85 /*
86 * Drop the mutex while probing each device; the probe path may
87 * manipulate the deferred list
88 */
89 mutex_unlock(&deferred_probe_mutex);
90
91 /*
92 * Force the device to the end of the dpm_list since
93 * the PM code assumes that the order we add things to
94 * the list is a good order for suspend but deferred
95 * probe makes that very unsafe.
96 */
97 device_pm_lock();
98 device_pm_move_last(dev);
99 device_pm_unlock();
100
101 dev_dbg(dev, "Retrying from deferred list\n");
102 bus_probe_device(dev);
103
104 mutex_lock(&deferred_probe_mutex);
105
106 put_device(dev);
107 }
108 mutex_unlock(&deferred_probe_mutex);
109}
110static DECLARE_WORK(deferred_probe_work, deferred_probe_work_func);
111
112static void driver_deferred_probe_add(struct device *dev)
113{
114 mutex_lock(&deferred_probe_mutex);
115 if (list_empty(&dev->p->deferred_probe)) {
116 dev_dbg(dev, "Added to deferred list\n");
117 list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
118 }
119 mutex_unlock(&deferred_probe_mutex);
120}
121
122void driver_deferred_probe_del(struct device *dev)
123{
124 mutex_lock(&deferred_probe_mutex);
125 if (!list_empty(&dev->p->deferred_probe)) {
126 dev_dbg(dev, "Removed from deferred list\n");
127 list_del_init(&dev->p->deferred_probe);
128 }
129 mutex_unlock(&deferred_probe_mutex);
130}
131
132static bool driver_deferred_probe_enable = false;
133/**
134 * driver_deferred_probe_trigger() - Kick off re-probing deferred devices
135 *
136 * This functions moves all devices from the pending list to the active
137 * list and schedules the deferred probe workqueue to process them. It
138 * should be called anytime a driver is successfully bound to a device.
139 *
140 * Note, there is a race condition in multi-threaded probe. In the case where
141 * more than one device is probing at the same time, it is possible for one
142 * probe to complete successfully while another is about to defer. If the second
143 * depends on the first, then it will get put on the pending list after the
144 * trigger event has already occured and will be stuck there.
145 *
146 * The atomic 'deferred_trigger_count' is used to determine if a successful
147 * trigger has occurred in the midst of probing a driver. If the trigger count
148 * changes in the midst of a probe, then deferred processing should be triggered
149 * again.
150 */
151static void driver_deferred_probe_trigger(void)
152{
153 if (!driver_deferred_probe_enable)
154 return;
155
156 /*
157 * A successful probe means that all the devices in the pending list
158 * should be triggered to be reprobed. Move all the deferred devices
159 * into the active list so they can be retried by the workqueue
160 */
161 mutex_lock(&deferred_probe_mutex);
162 atomic_inc(&deferred_trigger_count);
163 list_splice_tail_init(&deferred_probe_pending_list,
164 &deferred_probe_active_list);
165 mutex_unlock(&deferred_probe_mutex);
166
167 /*
168 * Kick the re-probe thread. It may already be scheduled, but it is
169 * safe to kick it again.
170 */
171 queue_work(deferred_wq, &deferred_probe_work);
172}
173
174/**
175 * deferred_probe_initcall() - Enable probing of deferred devices
176 *
177 * We don't want to get in the way when the bulk of drivers are getting probed.
178 * Instead, this initcall makes sure that deferred probing is delayed until
179 * late_initcall time.
180 */
181static int deferred_probe_initcall(void)
182{
183 deferred_wq = create_singlethread_workqueue("deferwq");
184 if (WARN_ON(!deferred_wq))
185 return -ENOMEM;
186
187 driver_deferred_probe_enable = true;
188 driver_deferred_probe_trigger();
189 /* Sort as many dependencies as possible before exiting initcalls */
190 flush_workqueue(deferred_wq);
191 return 0;
192}
193late_initcall(deferred_probe_initcall);
194
195static void driver_bound(struct device *dev)
196{
197 if (klist_node_attached(&dev->p->knode_driver)) {
198 printk(KERN_WARNING "%s: device %s already bound\n",
199 __func__, kobject_name(&dev->kobj));
200 return;
201 }
202
203 pr_debug("driver: '%s': %s: bound to device '%s'\n", dev->driver->name,
204 __func__, dev_name(dev));
205
206 klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices);
207
208 /*
209 * Make sure the device is no longer in one of the deferred lists and
210 * kick off retrying all pending devices
211 */
212 driver_deferred_probe_del(dev);
213 driver_deferred_probe_trigger();
214
215 if (dev->bus)
216 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
217 BUS_NOTIFY_BOUND_DRIVER, dev);
218}
219
220static int driver_sysfs_add(struct device *dev)
221{
222 int ret;
223
224 if (dev->bus)
225 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
226 BUS_NOTIFY_BIND_DRIVER, dev);
227
228 ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj,
229 kobject_name(&dev->kobj));
230 if (ret == 0) {
231 ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj,
232 "driver");
233 if (ret)
234 sysfs_remove_link(&dev->driver->p->kobj,
235 kobject_name(&dev->kobj));
236 }
237 return ret;
238}
239
240static void driver_sysfs_remove(struct device *dev)
241{
242 struct device_driver *drv = dev->driver;
243
244 if (drv) {
245 sysfs_remove_link(&drv->p->kobj, kobject_name(&dev->kobj));
246 sysfs_remove_link(&dev->kobj, "driver");
247 }
248}
249
250/**
251 * device_bind_driver - bind a driver to one device.
252 * @dev: device.
253 *
254 * Allow manual attachment of a driver to a device.
255 * Caller must have already set @dev->driver.
256 *
257 * Note that this does not modify the bus reference count
258 * nor take the bus's rwsem. Please verify those are accounted
259 * for before calling this. (It is ok to call with no other effort
260 * from a driver's probe() method.)
261 *
262 * This function must be called with the device lock held.
263 */
264int device_bind_driver(struct device *dev)
265{
266 int ret;
267
268 ret = driver_sysfs_add(dev);
269 if (!ret)
270 driver_bound(dev);
271 return ret;
272}
273EXPORT_SYMBOL_GPL(device_bind_driver);
274
275static atomic_t probe_count = ATOMIC_INIT(0);
276static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue);
277
278static int really_probe(struct device *dev, struct device_driver *drv)
279{
280 int ret = 0;
281 int local_trigger_count = atomic_read(&deferred_trigger_count);
282
283 atomic_inc(&probe_count);
284 pr_debug("bus: '%s': %s: probing driver %s with device %s\n",
285 drv->bus->name, __func__, drv->name, dev_name(dev));
286 WARN_ON(!list_empty(&dev->devres_head));
287
288 dev->driver = drv;
289
290 /* If using pinctrl, bind pins now before probing */
291 ret = pinctrl_bind_pins(dev);
292 if (ret)
293 goto probe_failed;
294
295 if (driver_sysfs_add(dev)) {
296 printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
297 __func__, dev_name(dev));
298 goto probe_failed;
299 }
300
301 if (dev->bus->probe) {
302 ret = dev->bus->probe(dev);
303 if (ret)
304 goto probe_failed;
305 } else if (drv->probe) {
306 ret = drv->probe(dev);
307 if (ret)
308 goto probe_failed;
309 }
310
311 driver_bound(dev);
312 ret = 1;
313 pr_debug("bus: '%s': %s: bound device %s to driver %s\n",
314 drv->bus->name, __func__, dev_name(dev), drv->name);
315 goto done;
316
317probe_failed:
318 devres_release_all(dev);
319 driver_sysfs_remove(dev);
320 dev->driver = NULL;
321 dev_set_drvdata(dev, NULL);
322
323 if (ret == -EPROBE_DEFER) {
324 /* Driver requested deferred probing */
325 dev_info(dev, "Driver %s requests probe deferral\n", drv->name);
326 driver_deferred_probe_add(dev);
327 /* Did a trigger occur while probing? Need to re-trigger if yes */
328 if (local_trigger_count != atomic_read(&deferred_trigger_count))
329 driver_deferred_probe_trigger();
330 } else if (ret != -ENODEV && ret != -ENXIO) {
331 /* driver matched but the probe failed */
332 printk(KERN_WARNING
333 "%s: probe of %s failed with error %d\n",
334 drv->name, dev_name(dev), ret);
335 } else {
336 pr_debug("%s: probe of %s rejects match %d\n",
337 drv->name, dev_name(dev), ret);
338 }
339 /*
340 * Ignore errors returned by ->probe so that the next driver can try
341 * its luck.
342 */
343 ret = 0;
344done:
345 atomic_dec(&probe_count);
346 wake_up(&probe_waitqueue);
347 return ret;
348}
349
350/**
351 * driver_probe_done
352 * Determine if the probe sequence is finished or not.
353 *
354 * Should somehow figure out how to use a semaphore, not an atomic variable...
355 */
356int driver_probe_done(void)
357{
358 pr_debug("%s: probe_count = %d\n", __func__,
359 atomic_read(&probe_count));
360 if (atomic_read(&probe_count))
361 return -EBUSY;
362 return 0;
363}
364
365/**
366 * wait_for_device_probe
367 * Wait for device probing to be completed.
368 */
369void wait_for_device_probe(void)
370{
371 /* wait for the known devices to complete their probing */
372 wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
373 async_synchronize_full();
374}
375EXPORT_SYMBOL_GPL(wait_for_device_probe);
376
377/**
378 * driver_probe_device - attempt to bind device & driver together
379 * @drv: driver to bind a device to
380 * @dev: device to try to bind to the driver
381 *
382 * This function returns -ENODEV if the device is not registered,
383 * 1 if the device is bound successfully and 0 otherwise.
384 *
385 * This function must be called with @dev lock held. When called for a
386 * USB interface, @dev->parent lock must be held as well.
387 */
388int driver_probe_device(struct device_driver *drv, struct device *dev)
389{
390 int ret = 0;
391
392 if (!device_is_registered(dev))
393 return -ENODEV;
394
395 pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
396 drv->bus->name, __func__, dev_name(dev), drv->name);
397
398 pm_runtime_barrier(dev);
399 ret = really_probe(dev, drv);
400 pm_request_idle(dev);
401
402 return ret;
403}
404
405static int __device_attach(struct device_driver *drv, void *data)
406{
407 struct device *dev = data;
408
409 if (!driver_match_device(drv, dev))
410 return 0;
411
412 return driver_probe_device(drv, dev);
413}
414
415/**
416 * device_attach - try to attach device to a driver.
417 * @dev: device.
418 *
419 * Walk the list of drivers that the bus has and call
420 * driver_probe_device() for each pair. If a compatible
421 * pair is found, break out and return.
422 *
423 * Returns 1 if the device was bound to a driver;
424 * 0 if no matching driver was found;
425 * -ENODEV if the device is not registered.
426 *
427 * When called for a USB interface, @dev->parent lock must be held.
428 */
429int device_attach(struct device *dev)
430{
431 int ret = 0;
432
433 device_lock(dev);
434 if (dev->driver) {
435 if (klist_node_attached(&dev->p->knode_driver)) {
436 ret = 1;
437 goto out_unlock;
438 }
439 ret = device_bind_driver(dev);
440 if (ret == 0)
441 ret = 1;
442 else {
443 dev->driver = NULL;
444 ret = 0;
445 }
446 } else {
447 ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
448 pm_request_idle(dev);
449 }
450out_unlock:
451 device_unlock(dev);
452 return ret;
453}
454EXPORT_SYMBOL_GPL(device_attach);
455
456static int __driver_attach(struct device *dev, void *data)
457{
458 struct device_driver *drv = data;
459
460 /*
461 * Lock device and try to bind to it. We drop the error
462 * here and always return 0, because we need to keep trying
463 * to bind to devices and some drivers will return an error
464 * simply if it didn't support the device.
465 *
466 * driver_probe_device() will spit a warning if there
467 * is an error.
468 */
469
470 if (!driver_match_device(drv, dev))
471 return 0;
472
473 if (dev->parent) /* Needed for USB */
474 device_lock(dev->parent);
475 device_lock(dev);
476 if (!dev->driver)
477 driver_probe_device(drv, dev);
478 device_unlock(dev);
479 if (dev->parent)
480 device_unlock(dev->parent);
481
482 return 0;
483}
484
485/**
486 * driver_attach - try to bind driver to devices.
487 * @drv: driver.
488 *
489 * Walk the list of devices that the bus has on it and try to
490 * match the driver with each one. If driver_probe_device()
491 * returns 0 and the @dev->driver is set, we've found a
492 * compatible pair.
493 */
494int driver_attach(struct device_driver *drv)
495{
496 return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
497}
498EXPORT_SYMBOL_GPL(driver_attach);
499
500/*
501 * __device_release_driver() must be called with @dev lock held.
502 * When called for a USB interface, @dev->parent lock must be held as well.
503 */
504static void __device_release_driver(struct device *dev)
505{
506 struct device_driver *drv;
507
508 drv = dev->driver;
509 if (drv) {
510 pm_runtime_get_sync(dev);
511
512 driver_sysfs_remove(dev);
513
514 if (dev->bus)
515 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
516 BUS_NOTIFY_UNBIND_DRIVER,
517 dev);
518
519 pm_runtime_put_sync(dev);
520
521 if (dev->bus && dev->bus->remove)
522 dev->bus->remove(dev);
523 else if (drv->remove)
524 drv->remove(dev);
525 devres_release_all(dev);
526 dev->driver = NULL;
527 dev_set_drvdata(dev, NULL);
528 klist_remove(&dev->p->knode_driver);
529 if (dev->bus)
530 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
531 BUS_NOTIFY_UNBOUND_DRIVER,
532 dev);
533
534 }
535}
536
537/**
538 * device_release_driver - manually detach device from driver.
539 * @dev: device.
540 *
541 * Manually detach device from driver.
542 * When called for a USB interface, @dev->parent lock must be held.
543 */
544void device_release_driver(struct device *dev)
545{
546 /*
547 * If anyone calls device_release_driver() recursively from
548 * within their ->remove callback for the same device, they
549 * will deadlock right here.
550 */
551 device_lock(dev);
552 __device_release_driver(dev);
553 device_unlock(dev);
554}
555EXPORT_SYMBOL_GPL(device_release_driver);
556
557/**
558 * driver_detach - detach driver from all devices it controls.
559 * @drv: driver.
560 */
561void driver_detach(struct device_driver *drv)
562{
563 struct device_private *dev_prv;
564 struct device *dev;
565
566 for (;;) {
567 spin_lock(&drv->p->klist_devices.k_lock);
568 if (list_empty(&drv->p->klist_devices.k_list)) {
569 spin_unlock(&drv->p->klist_devices.k_lock);
570 break;
571 }
572 dev_prv = list_entry(drv->p->klist_devices.k_list.prev,
573 struct device_private,
574 knode_driver.n_node);
575 dev = dev_prv->device;
576 get_device(dev);
577 spin_unlock(&drv->p->klist_devices.k_lock);
578
579 if (dev->parent) /* Needed for USB */
580 device_lock(dev->parent);
581 device_lock(dev);
582 if (dev->driver == drv)
583 __device_release_driver(dev);
584 device_unlock(dev);
585 if (dev->parent)
586 device_unlock(dev->parent);
587 put_device(dev);
588 }
589}
590
591/*
592 * These exports can't be _GPL due to .h files using this within them, and it
593 * might break something that was previously working...
594 */
595void *dev_get_drvdata(const struct device *dev)
596{
597 if (dev && dev->p)
598 return dev->p->driver_data;
599 return NULL;
600}
601EXPORT_SYMBOL(dev_get_drvdata);
602
603int dev_set_drvdata(struct device *dev, void *data)
604{
605 int error;
606
607 if (!dev->p) {
608 error = device_private_init(dev);
609 if (error)
610 return error;
611 }
612 dev->p->driver_data = data;
613 return 0;
614}
615EXPORT_SYMBOL(dev_set_drvdata);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * drivers/base/dd.c - The core device/driver interactions.
4 *
5 * This file contains the (sometimes tricky) code that controls the
6 * interactions between devices and drivers, which primarily includes
7 * driver binding and unbinding.
8 *
9 * All of this code used to exist in drivers/base/bus.c, but was
10 * relocated to here in the name of compartmentalization (since it wasn't
11 * strictly code just for the 'struct bus_type'.
12 *
13 * Copyright (c) 2002-5 Patrick Mochel
14 * Copyright (c) 2002-3 Open Source Development Labs
15 * Copyright (c) 2007-2009 Greg Kroah-Hartman <gregkh@suse.de>
16 * Copyright (c) 2007-2009 Novell Inc.
17 */
18
19#include <linux/device.h>
20#include <linux/delay.h>
21#include <linux/dma-mapping.h>
22#include <linux/init.h>
23#include <linux/module.h>
24#include <linux/kthread.h>
25#include <linux/wait.h>
26#include <linux/async.h>
27#include <linux/pm_runtime.h>
28#include <linux/pinctrl/devinfo.h>
29
30#include "base.h"
31#include "power/power.h"
32
33/*
34 * Deferred Probe infrastructure.
35 *
36 * Sometimes driver probe order matters, but the kernel doesn't always have
37 * dependency information which means some drivers will get probed before a
38 * resource it depends on is available. For example, an SDHCI driver may
39 * first need a GPIO line from an i2c GPIO controller before it can be
40 * initialized. If a required resource is not available yet, a driver can
41 * request probing to be deferred by returning -EPROBE_DEFER from its probe hook
42 *
43 * Deferred probe maintains two lists of devices, a pending list and an active
44 * list. A driver returning -EPROBE_DEFER causes the device to be added to the
45 * pending list. A successful driver probe will trigger moving all devices
46 * from the pending to the active list so that the workqueue will eventually
47 * retry them.
48 *
49 * The deferred_probe_mutex must be held any time the deferred_probe_*_list
50 * of the (struct device*)->p->deferred_probe pointers are manipulated
51 */
52static DEFINE_MUTEX(deferred_probe_mutex);
53static LIST_HEAD(deferred_probe_pending_list);
54static LIST_HEAD(deferred_probe_active_list);
55static atomic_t deferred_trigger_count = ATOMIC_INIT(0);
56static bool initcalls_done;
57
58/*
59 * In some cases, like suspend to RAM or hibernation, It might be reasonable
60 * to prohibit probing of devices as it could be unsafe.
61 * Once defer_all_probes is true all drivers probes will be forcibly deferred.
62 */
63static bool defer_all_probes;
64
65/*
66 * For initcall_debug, show the deferred probes executed in late_initcall
67 * processing.
68 */
69static void deferred_probe_debug(struct device *dev)
70{
71 ktime_t calltime, delta, rettime;
72 unsigned long long duration;
73
74 printk(KERN_DEBUG "deferred probe %s @ %i\n", dev_name(dev),
75 task_pid_nr(current));
76 calltime = ktime_get();
77 bus_probe_device(dev);
78 rettime = ktime_get();
79 delta = ktime_sub(rettime, calltime);
80 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
81 printk(KERN_DEBUG "deferred probe %s returned after %lld usecs\n",
82 dev_name(dev), duration);
83}
84
85/*
86 * deferred_probe_work_func() - Retry probing devices in the active list.
87 */
88static void deferred_probe_work_func(struct work_struct *work)
89{
90 struct device *dev;
91 struct device_private *private;
92 /*
93 * This block processes every device in the deferred 'active' list.
94 * Each device is removed from the active list and passed to
95 * bus_probe_device() to re-attempt the probe. The loop continues
96 * until every device in the active list is removed and retried.
97 *
98 * Note: Once the device is removed from the list and the mutex is
99 * released, it is possible for the device get freed by another thread
100 * and cause a illegal pointer dereference. This code uses
101 * get/put_device() to ensure the device structure cannot disappear
102 * from under our feet.
103 */
104 mutex_lock(&deferred_probe_mutex);
105 while (!list_empty(&deferred_probe_active_list)) {
106 private = list_first_entry(&deferred_probe_active_list,
107 typeof(*dev->p), deferred_probe);
108 dev = private->device;
109 list_del_init(&private->deferred_probe);
110
111 get_device(dev);
112
113 /*
114 * Drop the mutex while probing each device; the probe path may
115 * manipulate the deferred list
116 */
117 mutex_unlock(&deferred_probe_mutex);
118
119 /*
120 * Force the device to the end of the dpm_list since
121 * the PM code assumes that the order we add things to
122 * the list is a good order for suspend but deferred
123 * probe makes that very unsafe.
124 */
125 device_pm_lock();
126 device_pm_move_last(dev);
127 device_pm_unlock();
128
129 dev_dbg(dev, "Retrying from deferred list\n");
130 if (initcall_debug && !initcalls_done)
131 deferred_probe_debug(dev);
132 else
133 bus_probe_device(dev);
134
135 mutex_lock(&deferred_probe_mutex);
136
137 put_device(dev);
138 }
139 mutex_unlock(&deferred_probe_mutex);
140}
141static DECLARE_WORK(deferred_probe_work, deferred_probe_work_func);
142
143static void driver_deferred_probe_add(struct device *dev)
144{
145 mutex_lock(&deferred_probe_mutex);
146 if (list_empty(&dev->p->deferred_probe)) {
147 dev_dbg(dev, "Added to deferred list\n");
148 list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
149 }
150 mutex_unlock(&deferred_probe_mutex);
151}
152
153void driver_deferred_probe_del(struct device *dev)
154{
155 mutex_lock(&deferred_probe_mutex);
156 if (!list_empty(&dev->p->deferred_probe)) {
157 dev_dbg(dev, "Removed from deferred list\n");
158 list_del_init(&dev->p->deferred_probe);
159 }
160 mutex_unlock(&deferred_probe_mutex);
161}
162
163static bool driver_deferred_probe_enable = false;
164/**
165 * driver_deferred_probe_trigger() - Kick off re-probing deferred devices
166 *
167 * This functions moves all devices from the pending list to the active
168 * list and schedules the deferred probe workqueue to process them. It
169 * should be called anytime a driver is successfully bound to a device.
170 *
171 * Note, there is a race condition in multi-threaded probe. In the case where
172 * more than one device is probing at the same time, it is possible for one
173 * probe to complete successfully while another is about to defer. If the second
174 * depends on the first, then it will get put on the pending list after the
175 * trigger event has already occurred and will be stuck there.
176 *
177 * The atomic 'deferred_trigger_count' is used to determine if a successful
178 * trigger has occurred in the midst of probing a driver. If the trigger count
179 * changes in the midst of a probe, then deferred processing should be triggered
180 * again.
181 */
182static void driver_deferred_probe_trigger(void)
183{
184 if (!driver_deferred_probe_enable)
185 return;
186
187 /*
188 * A successful probe means that all the devices in the pending list
189 * should be triggered to be reprobed. Move all the deferred devices
190 * into the active list so they can be retried by the workqueue
191 */
192 mutex_lock(&deferred_probe_mutex);
193 atomic_inc(&deferred_trigger_count);
194 list_splice_tail_init(&deferred_probe_pending_list,
195 &deferred_probe_active_list);
196 mutex_unlock(&deferred_probe_mutex);
197
198 /*
199 * Kick the re-probe thread. It may already be scheduled, but it is
200 * safe to kick it again.
201 */
202 schedule_work(&deferred_probe_work);
203}
204
205/**
206 * device_block_probing() - Block/defere device's probes
207 *
208 * It will disable probing of devices and defer their probes instead.
209 */
210void device_block_probing(void)
211{
212 defer_all_probes = true;
213 /* sync with probes to avoid races. */
214 wait_for_device_probe();
215}
216
217/**
218 * device_unblock_probing() - Unblock/enable device's probes
219 *
220 * It will restore normal behavior and trigger re-probing of deferred
221 * devices.
222 */
223void device_unblock_probing(void)
224{
225 defer_all_probes = false;
226 driver_deferred_probe_trigger();
227}
228
229/**
230 * deferred_probe_initcall() - Enable probing of deferred devices
231 *
232 * We don't want to get in the way when the bulk of drivers are getting probed.
233 * Instead, this initcall makes sure that deferred probing is delayed until
234 * late_initcall time.
235 */
236static int deferred_probe_initcall(void)
237{
238 driver_deferred_probe_enable = true;
239 driver_deferred_probe_trigger();
240 /* Sort as many dependencies as possible before exiting initcalls */
241 flush_work(&deferred_probe_work);
242 initcalls_done = true;
243 return 0;
244}
245late_initcall(deferred_probe_initcall);
246
247/**
248 * device_is_bound() - Check if device is bound to a driver
249 * @dev: device to check
250 *
251 * Returns true if passed device has already finished probing successfully
252 * against a driver.
253 *
254 * This function must be called with the device lock held.
255 */
256bool device_is_bound(struct device *dev)
257{
258 return dev->p && klist_node_attached(&dev->p->knode_driver);
259}
260
261static void driver_bound(struct device *dev)
262{
263 if (device_is_bound(dev)) {
264 printk(KERN_WARNING "%s: device %s already bound\n",
265 __func__, kobject_name(&dev->kobj));
266 return;
267 }
268
269 pr_debug("driver: '%s': %s: bound to device '%s'\n", dev->driver->name,
270 __func__, dev_name(dev));
271
272 klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices);
273 device_links_driver_bound(dev);
274
275 device_pm_check_callbacks(dev);
276
277 /*
278 * Make sure the device is no longer in one of the deferred lists and
279 * kick off retrying all pending devices
280 */
281 driver_deferred_probe_del(dev);
282 driver_deferred_probe_trigger();
283
284 if (dev->bus)
285 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
286 BUS_NOTIFY_BOUND_DRIVER, dev);
287
288 kobject_uevent(&dev->kobj, KOBJ_BIND);
289}
290
291static ssize_t coredump_store(struct device *dev, struct device_attribute *attr,
292 const char *buf, size_t count)
293{
294 device_lock(dev);
295 dev->driver->coredump(dev);
296 device_unlock(dev);
297
298 return count;
299}
300static DEVICE_ATTR_WO(coredump);
301
302static int driver_sysfs_add(struct device *dev)
303{
304 int ret;
305
306 if (dev->bus)
307 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
308 BUS_NOTIFY_BIND_DRIVER, dev);
309
310 ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj,
311 kobject_name(&dev->kobj));
312 if (ret)
313 goto fail;
314
315 ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj,
316 "driver");
317 if (ret)
318 goto rm_dev;
319
320 if (!IS_ENABLED(CONFIG_DEV_COREDUMP) || !dev->driver->coredump ||
321 !device_create_file(dev, &dev_attr_coredump))
322 return 0;
323
324 sysfs_remove_link(&dev->kobj, "driver");
325
326rm_dev:
327 sysfs_remove_link(&dev->driver->p->kobj,
328 kobject_name(&dev->kobj));
329
330fail:
331 return ret;
332}
333
334static void driver_sysfs_remove(struct device *dev)
335{
336 struct device_driver *drv = dev->driver;
337
338 if (drv) {
339 if (drv->coredump)
340 device_remove_file(dev, &dev_attr_coredump);
341 sysfs_remove_link(&drv->p->kobj, kobject_name(&dev->kobj));
342 sysfs_remove_link(&dev->kobj, "driver");
343 }
344}
345
346/**
347 * device_bind_driver - bind a driver to one device.
348 * @dev: device.
349 *
350 * Allow manual attachment of a driver to a device.
351 * Caller must have already set @dev->driver.
352 *
353 * Note that this does not modify the bus reference count
354 * nor take the bus's rwsem. Please verify those are accounted
355 * for before calling this. (It is ok to call with no other effort
356 * from a driver's probe() method.)
357 *
358 * This function must be called with the device lock held.
359 */
360int device_bind_driver(struct device *dev)
361{
362 int ret;
363
364 ret = driver_sysfs_add(dev);
365 if (!ret)
366 driver_bound(dev);
367 else if (dev->bus)
368 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
369 BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
370 return ret;
371}
372EXPORT_SYMBOL_GPL(device_bind_driver);
373
374static atomic_t probe_count = ATOMIC_INIT(0);
375static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue);
376
377static void driver_deferred_probe_add_trigger(struct device *dev,
378 int local_trigger_count)
379{
380 driver_deferred_probe_add(dev);
381 /* Did a trigger occur while probing? Need to re-trigger if yes */
382 if (local_trigger_count != atomic_read(&deferred_trigger_count))
383 driver_deferred_probe_trigger();
384}
385
386static int really_probe(struct device *dev, struct device_driver *drv)
387{
388 int ret = -EPROBE_DEFER;
389 int local_trigger_count = atomic_read(&deferred_trigger_count);
390 bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) &&
391 !drv->suppress_bind_attrs;
392
393 if (defer_all_probes) {
394 /*
395 * Value of defer_all_probes can be set only by
396 * device_defer_all_probes_enable() which, in turn, will call
397 * wait_for_device_probe() right after that to avoid any races.
398 */
399 dev_dbg(dev, "Driver %s force probe deferral\n", drv->name);
400 driver_deferred_probe_add(dev);
401 return ret;
402 }
403
404 ret = device_links_check_suppliers(dev);
405 if (ret == -EPROBE_DEFER)
406 driver_deferred_probe_add_trigger(dev, local_trigger_count);
407 if (ret)
408 return ret;
409
410 atomic_inc(&probe_count);
411 pr_debug("bus: '%s': %s: probing driver %s with device %s\n",
412 drv->bus->name, __func__, drv->name, dev_name(dev));
413 WARN_ON(!list_empty(&dev->devres_head));
414
415re_probe:
416 dev->driver = drv;
417
418 /* If using pinctrl, bind pins now before probing */
419 ret = pinctrl_bind_pins(dev);
420 if (ret)
421 goto pinctrl_bind_failed;
422
423 ret = dma_configure(dev);
424 if (ret)
425 goto dma_failed;
426
427 if (driver_sysfs_add(dev)) {
428 printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
429 __func__, dev_name(dev));
430 goto probe_failed;
431 }
432
433 if (dev->pm_domain && dev->pm_domain->activate) {
434 ret = dev->pm_domain->activate(dev);
435 if (ret)
436 goto probe_failed;
437 }
438
439 /*
440 * Ensure devices are listed in devices_kset in correct order
441 * It's important to move Dev to the end of devices_kset before
442 * calling .probe, because it could be recursive and parent Dev
443 * should always go first
444 */
445 devices_kset_move_last(dev);
446
447 if (dev->bus->probe) {
448 ret = dev->bus->probe(dev);
449 if (ret)
450 goto probe_failed;
451 } else if (drv->probe) {
452 ret = drv->probe(dev);
453 if (ret)
454 goto probe_failed;
455 }
456
457 if (test_remove) {
458 test_remove = false;
459
460 if (dev->bus->remove)
461 dev->bus->remove(dev);
462 else if (drv->remove)
463 drv->remove(dev);
464
465 devres_release_all(dev);
466 driver_sysfs_remove(dev);
467 dev->driver = NULL;
468 dev_set_drvdata(dev, NULL);
469 if (dev->pm_domain && dev->pm_domain->dismiss)
470 dev->pm_domain->dismiss(dev);
471 pm_runtime_reinit(dev);
472
473 goto re_probe;
474 }
475
476 pinctrl_init_done(dev);
477
478 if (dev->pm_domain && dev->pm_domain->sync)
479 dev->pm_domain->sync(dev);
480
481 driver_bound(dev);
482 ret = 1;
483 pr_debug("bus: '%s': %s: bound device %s to driver %s\n",
484 drv->bus->name, __func__, dev_name(dev), drv->name);
485 goto done;
486
487probe_failed:
488 dma_deconfigure(dev);
489dma_failed:
490 if (dev->bus)
491 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
492 BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
493pinctrl_bind_failed:
494 device_links_no_driver(dev);
495 devres_release_all(dev);
496 driver_sysfs_remove(dev);
497 dev->driver = NULL;
498 dev_set_drvdata(dev, NULL);
499 if (dev->pm_domain && dev->pm_domain->dismiss)
500 dev->pm_domain->dismiss(dev);
501 pm_runtime_reinit(dev);
502 dev_pm_set_driver_flags(dev, 0);
503
504 switch (ret) {
505 case -EPROBE_DEFER:
506 /* Driver requested deferred probing */
507 dev_dbg(dev, "Driver %s requests probe deferral\n", drv->name);
508 driver_deferred_probe_add_trigger(dev, local_trigger_count);
509 break;
510 case -ENODEV:
511 case -ENXIO:
512 pr_debug("%s: probe of %s rejects match %d\n",
513 drv->name, dev_name(dev), ret);
514 break;
515 default:
516 /* driver matched but the probe failed */
517 printk(KERN_WARNING
518 "%s: probe of %s failed with error %d\n",
519 drv->name, dev_name(dev), ret);
520 }
521 /*
522 * Ignore errors returned by ->probe so that the next driver can try
523 * its luck.
524 */
525 ret = 0;
526done:
527 atomic_dec(&probe_count);
528 wake_up(&probe_waitqueue);
529 return ret;
530}
531
532/**
533 * driver_probe_done
534 * Determine if the probe sequence is finished or not.
535 *
536 * Should somehow figure out how to use a semaphore, not an atomic variable...
537 */
538int driver_probe_done(void)
539{
540 pr_debug("%s: probe_count = %d\n", __func__,
541 atomic_read(&probe_count));
542 if (atomic_read(&probe_count))
543 return -EBUSY;
544 return 0;
545}
546
547/**
548 * wait_for_device_probe
549 * Wait for device probing to be completed.
550 */
551void wait_for_device_probe(void)
552{
553 /* wait for the deferred probe workqueue to finish */
554 flush_work(&deferred_probe_work);
555
556 /* wait for the known devices to complete their probing */
557 wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
558 async_synchronize_full();
559}
560EXPORT_SYMBOL_GPL(wait_for_device_probe);
561
562/**
563 * driver_probe_device - attempt to bind device & driver together
564 * @drv: driver to bind a device to
565 * @dev: device to try to bind to the driver
566 *
567 * This function returns -ENODEV if the device is not registered,
568 * 1 if the device is bound successfully and 0 otherwise.
569 *
570 * This function must be called with @dev lock held. When called for a
571 * USB interface, @dev->parent lock must be held as well.
572 *
573 * If the device has a parent, runtime-resume the parent before driver probing.
574 */
575int driver_probe_device(struct device_driver *drv, struct device *dev)
576{
577 int ret = 0;
578
579 if (!device_is_registered(dev))
580 return -ENODEV;
581
582 pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
583 drv->bus->name, __func__, dev_name(dev), drv->name);
584
585 pm_runtime_get_suppliers(dev);
586 if (dev->parent)
587 pm_runtime_get_sync(dev->parent);
588
589 pm_runtime_barrier(dev);
590 ret = really_probe(dev, drv);
591 pm_request_idle(dev);
592
593 if (dev->parent)
594 pm_runtime_put(dev->parent);
595
596 pm_runtime_put_suppliers(dev);
597 return ret;
598}
599
600bool driver_allows_async_probing(struct device_driver *drv)
601{
602 switch (drv->probe_type) {
603 case PROBE_PREFER_ASYNCHRONOUS:
604 return true;
605
606 case PROBE_FORCE_SYNCHRONOUS:
607 return false;
608
609 default:
610 if (module_requested_async_probing(drv->owner))
611 return true;
612
613 return false;
614 }
615}
616
617struct device_attach_data {
618 struct device *dev;
619
620 /*
621 * Indicates whether we are are considering asynchronous probing or
622 * not. Only initial binding after device or driver registration
623 * (including deferral processing) may be done asynchronously, the
624 * rest is always synchronous, as we expect it is being done by
625 * request from userspace.
626 */
627 bool check_async;
628
629 /*
630 * Indicates if we are binding synchronous or asynchronous drivers.
631 * When asynchronous probing is enabled we'll execute 2 passes
632 * over drivers: first pass doing synchronous probing and second
633 * doing asynchronous probing (if synchronous did not succeed -
634 * most likely because there was no driver requiring synchronous
635 * probing - and we found asynchronous driver during first pass).
636 * The 2 passes are done because we can't shoot asynchronous
637 * probe for given device and driver from bus_for_each_drv() since
638 * driver pointer is not guaranteed to stay valid once
639 * bus_for_each_drv() iterates to the next driver on the bus.
640 */
641 bool want_async;
642
643 /*
644 * We'll set have_async to 'true' if, while scanning for matching
645 * driver, we'll encounter one that requests asynchronous probing.
646 */
647 bool have_async;
648};
649
650static int __device_attach_driver(struct device_driver *drv, void *_data)
651{
652 struct device_attach_data *data = _data;
653 struct device *dev = data->dev;
654 bool async_allowed;
655 int ret;
656
657 /*
658 * Check if device has already been claimed. This may
659 * happen with driver loading, device discovery/registration,
660 * and deferred probe processing happens all at once with
661 * multiple threads.
662 */
663 if (dev->driver)
664 return -EBUSY;
665
666 ret = driver_match_device(drv, dev);
667 if (ret == 0) {
668 /* no match */
669 return 0;
670 } else if (ret == -EPROBE_DEFER) {
671 dev_dbg(dev, "Device match requests probe deferral\n");
672 driver_deferred_probe_add(dev);
673 } else if (ret < 0) {
674 dev_dbg(dev, "Bus failed to match device: %d", ret);
675 return ret;
676 } /* ret > 0 means positive match */
677
678 async_allowed = driver_allows_async_probing(drv);
679
680 if (async_allowed)
681 data->have_async = true;
682
683 if (data->check_async && async_allowed != data->want_async)
684 return 0;
685
686 return driver_probe_device(drv, dev);
687}
688
689static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
690{
691 struct device *dev = _dev;
692 struct device_attach_data data = {
693 .dev = dev,
694 .check_async = true,
695 .want_async = true,
696 };
697
698 device_lock(dev);
699
700 if (dev->parent)
701 pm_runtime_get_sync(dev->parent);
702
703 bus_for_each_drv(dev->bus, NULL, &data, __device_attach_driver);
704 dev_dbg(dev, "async probe completed\n");
705
706 pm_request_idle(dev);
707
708 if (dev->parent)
709 pm_runtime_put(dev->parent);
710
711 device_unlock(dev);
712
713 put_device(dev);
714}
715
716static int __device_attach(struct device *dev, bool allow_async)
717{
718 int ret = 0;
719
720 device_lock(dev);
721 if (dev->driver) {
722 if (device_is_bound(dev)) {
723 ret = 1;
724 goto out_unlock;
725 }
726 ret = device_bind_driver(dev);
727 if (ret == 0)
728 ret = 1;
729 else {
730 dev->driver = NULL;
731 ret = 0;
732 }
733 } else {
734 struct device_attach_data data = {
735 .dev = dev,
736 .check_async = allow_async,
737 .want_async = false,
738 };
739
740 if (dev->parent)
741 pm_runtime_get_sync(dev->parent);
742
743 ret = bus_for_each_drv(dev->bus, NULL, &data,
744 __device_attach_driver);
745 if (!ret && allow_async && data.have_async) {
746 /*
747 * If we could not find appropriate driver
748 * synchronously and we are allowed to do
749 * async probes and there are drivers that
750 * want to probe asynchronously, we'll
751 * try them.
752 */
753 dev_dbg(dev, "scheduling asynchronous probe\n");
754 get_device(dev);
755 async_schedule(__device_attach_async_helper, dev);
756 } else {
757 pm_request_idle(dev);
758 }
759
760 if (dev->parent)
761 pm_runtime_put(dev->parent);
762 }
763out_unlock:
764 device_unlock(dev);
765 return ret;
766}
767
768/**
769 * device_attach - try to attach device to a driver.
770 * @dev: device.
771 *
772 * Walk the list of drivers that the bus has and call
773 * driver_probe_device() for each pair. If a compatible
774 * pair is found, break out and return.
775 *
776 * Returns 1 if the device was bound to a driver;
777 * 0 if no matching driver was found;
778 * -ENODEV if the device is not registered.
779 *
780 * When called for a USB interface, @dev->parent lock must be held.
781 */
782int device_attach(struct device *dev)
783{
784 return __device_attach(dev, false);
785}
786EXPORT_SYMBOL_GPL(device_attach);
787
788void device_initial_probe(struct device *dev)
789{
790 __device_attach(dev, true);
791}
792
793static int __driver_attach(struct device *dev, void *data)
794{
795 struct device_driver *drv = data;
796 int ret;
797
798 /*
799 * Lock device and try to bind to it. We drop the error
800 * here and always return 0, because we need to keep trying
801 * to bind to devices and some drivers will return an error
802 * simply if it didn't support the device.
803 *
804 * driver_probe_device() will spit a warning if there
805 * is an error.
806 */
807
808 ret = driver_match_device(drv, dev);
809 if (ret == 0) {
810 /* no match */
811 return 0;
812 } else if (ret == -EPROBE_DEFER) {
813 dev_dbg(dev, "Device match requests probe deferral\n");
814 driver_deferred_probe_add(dev);
815 } else if (ret < 0) {
816 dev_dbg(dev, "Bus failed to match device: %d", ret);
817 return ret;
818 } /* ret > 0 means positive match */
819
820 if (dev->parent) /* Needed for USB */
821 device_lock(dev->parent);
822 device_lock(dev);
823 if (!dev->driver)
824 driver_probe_device(drv, dev);
825 device_unlock(dev);
826 if (dev->parent)
827 device_unlock(dev->parent);
828
829 return 0;
830}
831
832/**
833 * driver_attach - try to bind driver to devices.
834 * @drv: driver.
835 *
836 * Walk the list of devices that the bus has on it and try to
837 * match the driver with each one. If driver_probe_device()
838 * returns 0 and the @dev->driver is set, we've found a
839 * compatible pair.
840 */
841int driver_attach(struct device_driver *drv)
842{
843 return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
844}
845EXPORT_SYMBOL_GPL(driver_attach);
846
847/*
848 * __device_release_driver() must be called with @dev lock held.
849 * When called for a USB interface, @dev->parent lock must be held as well.
850 */
851static void __device_release_driver(struct device *dev, struct device *parent)
852{
853 struct device_driver *drv;
854
855 drv = dev->driver;
856 if (drv) {
857 if (driver_allows_async_probing(drv))
858 async_synchronize_full();
859
860 while (device_links_busy(dev)) {
861 device_unlock(dev);
862 if (parent)
863 device_unlock(parent);
864
865 device_links_unbind_consumers(dev);
866 if (parent)
867 device_lock(parent);
868
869 device_lock(dev);
870 /*
871 * A concurrent invocation of the same function might
872 * have released the driver successfully while this one
873 * was waiting, so check for that.
874 */
875 if (dev->driver != drv)
876 return;
877 }
878
879 pm_runtime_get_sync(dev);
880 pm_runtime_clean_up_links(dev);
881
882 driver_sysfs_remove(dev);
883
884 if (dev->bus)
885 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
886 BUS_NOTIFY_UNBIND_DRIVER,
887 dev);
888
889 pm_runtime_put_sync(dev);
890
891 if (dev->bus && dev->bus->remove)
892 dev->bus->remove(dev);
893 else if (drv->remove)
894 drv->remove(dev);
895
896 device_links_driver_cleanup(dev);
897 dma_deconfigure(dev);
898
899 devres_release_all(dev);
900 dev->driver = NULL;
901 dev_set_drvdata(dev, NULL);
902 if (dev->pm_domain && dev->pm_domain->dismiss)
903 dev->pm_domain->dismiss(dev);
904 pm_runtime_reinit(dev);
905 dev_pm_set_driver_flags(dev, 0);
906
907 klist_remove(&dev->p->knode_driver);
908 device_pm_check_callbacks(dev);
909 if (dev->bus)
910 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
911 BUS_NOTIFY_UNBOUND_DRIVER,
912 dev);
913
914 kobject_uevent(&dev->kobj, KOBJ_UNBIND);
915 }
916}
917
918void device_release_driver_internal(struct device *dev,
919 struct device_driver *drv,
920 struct device *parent)
921{
922 if (parent)
923 device_lock(parent);
924
925 device_lock(dev);
926 if (!drv || drv == dev->driver)
927 __device_release_driver(dev, parent);
928
929 device_unlock(dev);
930 if (parent)
931 device_unlock(parent);
932}
933
934/**
935 * device_release_driver - manually detach device from driver.
936 * @dev: device.
937 *
938 * Manually detach device from driver.
939 * When called for a USB interface, @dev->parent lock must be held.
940 *
941 * If this function is to be called with @dev->parent lock held, ensure that
942 * the device's consumers are unbound in advance or that their locks can be
943 * acquired under the @dev->parent lock.
944 */
945void device_release_driver(struct device *dev)
946{
947 /*
948 * If anyone calls device_release_driver() recursively from
949 * within their ->remove callback for the same device, they
950 * will deadlock right here.
951 */
952 device_release_driver_internal(dev, NULL, NULL);
953}
954EXPORT_SYMBOL_GPL(device_release_driver);
955
956/**
957 * driver_detach - detach driver from all devices it controls.
958 * @drv: driver.
959 */
960void driver_detach(struct device_driver *drv)
961{
962 struct device_private *dev_prv;
963 struct device *dev;
964
965 for (;;) {
966 spin_lock(&drv->p->klist_devices.k_lock);
967 if (list_empty(&drv->p->klist_devices.k_list)) {
968 spin_unlock(&drv->p->klist_devices.k_lock);
969 break;
970 }
971 dev_prv = list_entry(drv->p->klist_devices.k_list.prev,
972 struct device_private,
973 knode_driver.n_node);
974 dev = dev_prv->device;
975 get_device(dev);
976 spin_unlock(&drv->p->klist_devices.k_lock);
977 device_release_driver_internal(dev, drv, dev->parent);
978 put_device(dev);
979 }
980}