Loading...
1/*
2 * linux/arch/arm/kernel/smp_scu.c
3 *
4 * Copyright (C) 2002 ARM Ltd.
5 * All Rights Reserved
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11#include <linux/init.h>
12#include <linux/io.h>
13
14#include <asm/smp_plat.h>
15#include <asm/smp_scu.h>
16#include <asm/cacheflush.h>
17#include <asm/cputype.h>
18
19#define SCU_CTRL 0x00
20#define SCU_CONFIG 0x04
21#define SCU_CPU_STATUS 0x08
22#define SCU_INVALIDATE 0x0c
23#define SCU_FPGA_REVISION 0x10
24
25#ifdef CONFIG_SMP
26/*
27 * Get the number of CPU cores from the SCU configuration
28 */
29unsigned int __init scu_get_core_count(void __iomem *scu_base)
30{
31 unsigned int ncores = readl_relaxed(scu_base + SCU_CONFIG);
32 return (ncores & 0x03) + 1;
33}
34
35/*
36 * Enable the SCU
37 */
38void scu_enable(void __iomem *scu_base)
39{
40 u32 scu_ctrl;
41
42#ifdef CONFIG_ARM_ERRATA_764369
43 /* Cortex-A9 only */
44 if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) {
45 scu_ctrl = readl_relaxed(scu_base + 0x30);
46 if (!(scu_ctrl & 1))
47 writel_relaxed(scu_ctrl | 0x1, scu_base + 0x30);
48 }
49#endif
50
51 scu_ctrl = readl_relaxed(scu_base + SCU_CTRL);
52 /* already enabled? */
53 if (scu_ctrl & 1)
54 return;
55
56 scu_ctrl |= 1;
57 writel_relaxed(scu_ctrl, scu_base + SCU_CTRL);
58
59 /*
60 * Ensure that the data accessed by CPU0 before the SCU was
61 * initialised is visible to the other CPUs.
62 */
63 flush_cache_all();
64}
65#endif
66
67/*
68 * Set the executing CPUs power mode as defined. This will be in
69 * preparation for it executing a WFI instruction.
70 *
71 * This function must be called with preemption disabled, and as it
72 * has the side effect of disabling coherency, caches must have been
73 * flushed. Interrupts must also have been disabled.
74 */
75int scu_power_mode(void __iomem *scu_base, unsigned int mode)
76{
77 unsigned int val;
78 int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
79
80 if (mode > 3 || mode == 1 || cpu > 3)
81 return -EINVAL;
82
83 val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
84 val |= mode;
85 writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
86
87 return 0;
88}
1/*
2 * linux/arch/arm/kernel/smp_scu.c
3 *
4 * Copyright (C) 2002 ARM Ltd.
5 * All Rights Reserved
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11#include <linux/init.h>
12#include <linux/io.h>
13
14#include <asm/smp_plat.h>
15#include <asm/smp_scu.h>
16#include <asm/cacheflush.h>
17#include <asm/cputype.h>
18
19#define SCU_CTRL 0x00
20#define SCU_ENABLE (1 << 0)
21#define SCU_STANDBY_ENABLE (1 << 5)
22#define SCU_CONFIG 0x04
23#define SCU_CPU_STATUS 0x08
24#define SCU_CPU_STATUS_MASK GENMASK(1, 0)
25#define SCU_INVALIDATE 0x0c
26#define SCU_FPGA_REVISION 0x10
27
28#ifdef CONFIG_SMP
29/*
30 * Get the number of CPU cores from the SCU configuration
31 */
32unsigned int __init scu_get_core_count(void __iomem *scu_base)
33{
34 unsigned int ncores = readl_relaxed(scu_base + SCU_CONFIG);
35 return (ncores & 0x03) + 1;
36}
37
38/*
39 * Enable the SCU
40 */
41void scu_enable(void __iomem *scu_base)
42{
43 u32 scu_ctrl;
44
45#ifdef CONFIG_ARM_ERRATA_764369
46 /* Cortex-A9 only */
47 if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) {
48 scu_ctrl = readl_relaxed(scu_base + 0x30);
49 if (!(scu_ctrl & 1))
50 writel_relaxed(scu_ctrl | 0x1, scu_base + 0x30);
51 }
52#endif
53
54 scu_ctrl = readl_relaxed(scu_base + SCU_CTRL);
55 /* already enabled? */
56 if (scu_ctrl & SCU_ENABLE)
57 return;
58
59 scu_ctrl |= SCU_ENABLE;
60
61 /* Cortex-A9 earlier than r2p0 has no standby bit in SCU */
62 if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090 &&
63 (read_cpuid_id() & 0x00f0000f) >= 0x00200000)
64 scu_ctrl |= SCU_STANDBY_ENABLE;
65
66 writel_relaxed(scu_ctrl, scu_base + SCU_CTRL);
67
68 /*
69 * Ensure that the data accessed by CPU0 before the SCU was
70 * initialised is visible to the other CPUs.
71 */
72 flush_cache_all();
73}
74#endif
75
76static int scu_set_power_mode_internal(void __iomem *scu_base,
77 unsigned int logical_cpu,
78 unsigned int mode)
79{
80 unsigned int val;
81 int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0);
82
83 if (mode > 3 || mode == 1 || cpu > 3)
84 return -EINVAL;
85
86 val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
87 val &= ~SCU_CPU_STATUS_MASK;
88 val |= mode;
89 writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
90
91 return 0;
92}
93
94/*
95 * Set the executing CPUs power mode as defined. This will be in
96 * preparation for it executing a WFI instruction.
97 *
98 * This function must be called with preemption disabled, and as it
99 * has the side effect of disabling coherency, caches must have been
100 * flushed. Interrupts must also have been disabled.
101 */
102int scu_power_mode(void __iomem *scu_base, unsigned int mode)
103{
104 return scu_set_power_mode_internal(scu_base, smp_processor_id(), mode);
105}
106
107/*
108 * Set the given (logical) CPU's power mode to SCU_PM_NORMAL.
109 */
110int scu_cpu_power_enable(void __iomem *scu_base, unsigned int cpu)
111{
112 return scu_set_power_mode_internal(scu_base, cpu, SCU_PM_NORMAL);
113}
114
115int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu)
116{
117 unsigned int val;
118 int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0);
119
120 if (cpu > 3)
121 return -EINVAL;
122
123 val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
124 val &= SCU_CPU_STATUS_MASK;
125
126 return val;
127}