Loading...
1#
2# Freescale device configuration
3#
4
5config NET_VENDOR_FREESCALE
6 bool "Freescale devices"
7 default y
8 depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
9 M523x || M527x || M5272 || M528x || M520x || M532x || \
10 ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM)
11 ---help---
12 If you have a network (Ethernet) card belonging to this class, say Y
13 and read the Ethernet-HOWTO, available from
14 <http://www.tldp.org/docs.html#howto>.
15
16 Note that the answer to this question doesn't directly affect the
17 kernel: saying N will just cause the configurator to skip all
18 the questions about Freescale devices. If you say Y, you will be
19 asked for your specific card in the following questions.
20
21if NET_VENDOR_FREESCALE
22
23config FEC
24 tristate "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
25 depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
26 ARCH_MXC || SOC_IMX28)
27 default ARCH_MXC || SOC_IMX28 if ARM
28 select PHYLIB
29 select PTP_1588_CLOCK
30 ---help---
31 Say Y here if you want to use the built-in 10/100 Fast ethernet
32 controller on some Motorola ColdFire and Freescale i.MX processors.
33
34config FEC_MPC52xx
35 tristate "FEC MPC52xx driver"
36 depends on PPC_MPC52xx && PPC_BESTCOMM
37 select CRC32
38 select PHYLIB
39 select PPC_BESTCOMM_FEC
40 ---help---
41 This option enables support for the MPC5200's on-chip
42 Fast Ethernet Controller
43 If compiled as module, it will be called fec_mpc52xx.
44
45config FEC_MPC52xx_MDIO
46 bool "FEC MPC52xx MDIO bus driver"
47 depends on FEC_MPC52xx
48 default y
49 ---help---
50 The MPC5200's FEC can connect to the Ethernet either with
51 an external MII PHY chip or 10 Mbps 7-wire interface
52 (Motorola? industry standard).
53 If your board uses an external PHY connected to FEC, enable this.
54 If not sure, enable.
55 If compiled as module, it will be called fec_mpc52xx_phy.
56
57source "drivers/net/ethernet/freescale/fs_enet/Kconfig"
58
59config FSL_PQ_MDIO
60 tristate "Freescale PQ MDIO"
61 depends on FSL_SOC
62 select PHYLIB
63 ---help---
64 This driver supports the MDIO bus used by the gianfar and UCC drivers.
65
66config FSL_XGMAC_MDIO
67 tristate "Freescale XGMAC MDIO"
68 depends on FSL_SOC
69 select PHYLIB
70 ---help---
71 This driver supports the MDIO bus on the Fman 10G Ethernet MACs.
72
73config UCC_GETH
74 tristate "Freescale QE Gigabit Ethernet"
75 depends on QUICC_ENGINE
76 select FSL_PQ_MDIO
77 select PHYLIB
78 ---help---
79 This driver supports the Gigabit Ethernet mode of the QUICC Engine,
80 which is available on some Freescale SOCs.
81
82config UGETH_TX_ON_DEMAND
83 bool "Transmit on Demand support"
84 depends on UCC_GETH
85
86config GIANFAR
87 tristate "Gianfar Ethernet"
88 depends on FSL_SOC
89 select FSL_PQ_MDIO
90 select PHYLIB
91 select CRC32
92 ---help---
93 This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
94 and MPC86xx family of chips, and the FEC on the 8540.
95
96endif # NET_VENDOR_FREESCALE
1#
2# Freescale device configuration
3#
4
5config NET_VENDOR_FREESCALE
6 bool "Freescale devices"
7 default y
8 depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
9 M523x || M527x || M5272 || M528x || M520x || M532x || \
10 ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
11 ARCH_LAYERSCAPE || COMPILE_TEST
12 ---help---
13 If you have a network (Ethernet) card belonging to this class, say Y.
14
15 Note that the answer to this question doesn't directly affect the
16 kernel: saying N will just cause the configurator to skip all
17 the questions about Freescale devices. If you say Y, you will be
18 asked for your specific card in the following questions.
19
20if NET_VENDOR_FREESCALE
21
22config FEC
23 tristate "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
24 depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
25 ARCH_MXC || SOC_IMX28)
26 default ARCH_MXC || SOC_IMX28 if ARM
27 select PHYLIB
28 imply PTP_1588_CLOCK
29 ---help---
30 Say Y here if you want to use the built-in 10/100 Fast ethernet
31 controller on some Motorola ColdFire and Freescale i.MX processors.
32
33config FEC_MPC52xx
34 tristate "FEC MPC52xx driver"
35 depends on PPC_MPC52xx && PPC_BESTCOMM
36 select CRC32
37 select PHYLIB
38 select PPC_BESTCOMM_FEC
39 ---help---
40 This option enables support for the MPC5200's on-chip
41 Fast Ethernet Controller
42 If compiled as module, it will be called fec_mpc52xx.
43
44config FEC_MPC52xx_MDIO
45 bool "FEC MPC52xx MDIO bus driver"
46 depends on FEC_MPC52xx
47 default y
48 ---help---
49 The MPC5200's FEC can connect to the Ethernet either with
50 an external MII PHY chip or 10 Mbps 7-wire interface
51 (Motorola? industry standard).
52 If your board uses an external PHY connected to FEC, enable this.
53 If not sure, enable.
54 If compiled as module, it will be called fec_mpc52xx_phy.
55
56source "drivers/net/ethernet/freescale/fs_enet/Kconfig"
57source "drivers/net/ethernet/freescale/fman/Kconfig"
58
59config FSL_PQ_MDIO
60 tristate "Freescale PQ MDIO"
61 select PHYLIB
62 ---help---
63 This driver supports the MDIO bus used by the gianfar and UCC drivers.
64
65config FSL_XGMAC_MDIO
66 tristate "Freescale XGMAC MDIO"
67 select PHYLIB
68 depends on OF
69 select OF_MDIO
70 ---help---
71 This driver supports the MDIO bus on the Fman 10G Ethernet MACs, and
72 on the FMan mEMAC (which supports both Clauses 22 and 45)
73
74config UCC_GETH
75 tristate "Freescale QE Gigabit Ethernet"
76 depends on QUICC_ENGINE
77 select FSL_PQ_MDIO
78 select PHYLIB
79 ---help---
80 This driver supports the Gigabit Ethernet mode of the QUICC Engine,
81 which is available on some Freescale SOCs.
82
83config UGETH_TX_ON_DEMAND
84 bool "Transmit on Demand support"
85 depends on UCC_GETH
86
87config GIANFAR
88 tristate "Gianfar Ethernet"
89 depends on HAS_DMA
90 select FSL_PQ_MDIO
91 select PHYLIB
92 select CRC32
93 ---help---
94 This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
95 and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
96 on the 8540.
97
98source "drivers/net/ethernet/freescale/dpaa/Kconfig"
99
100endif # NET_VENDOR_FREESCALE