Linux Audio

Check our new training course

Loading...
v3.15
  1/*
  2 * We need constants.h for:
  3 *  VMA_VM_MM
  4 *  VMA_VM_FLAGS
  5 *  VM_EXEC
  6 */
  7#include <asm/asm-offsets.h>
  8#include <asm/thread_info.h>
  9
 
 
 
 
 10/*
 11 * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
 12 */
 13	.macro	vma_vm_mm, rd, rn
 14	ldr	\rd, [\rn, #VMA_VM_MM]
 15	.endm
 16
 17/*
 18 * vma_vm_flags - get vma->vm_flags
 19 */
 20	.macro	vma_vm_flags, rd, rn
 21	ldr	\rd, [\rn, #VMA_VM_FLAGS]
 22	.endm
 23
 24	.macro	tsk_mm, rd, rn
 25	ldr	\rd, [\rn, #TI_TASK]
 26	ldr	\rd, [\rd, #TSK_ACTIVE_MM]
 27	.endm
 28
 29/*
 30 * act_mm - get current->active_mm
 31 */
 32	.macro	act_mm, rd
 33	bic	\rd, sp, #8128
 34	bic	\rd, \rd, #63
 35	ldr	\rd, [\rd, #TI_TASK]
 36	ldr	\rd, [\rd, #TSK_ACTIVE_MM]
 37	.endm
 38
 39/*
 40 * mmid - get context id from mm pointer (mm->context.id)
 41 * note, this field is 64bit, so in big-endian the two words are swapped too.
 42 */
 43	.macro	mmid, rd, rn
 44#ifdef __ARMEB__
 45	ldr	\rd, [\rn, #MM_CONTEXT_ID + 4 ]
 46#else
 47	ldr	\rd, [\rn, #MM_CONTEXT_ID]
 48#endif
 49	.endm
 50
 51/*
 52 * mask_asid - mask the ASID from the context ID
 53 */
 54	.macro	asid, rd, rn
 55	and	\rd, \rn, #255
 56	.endm
 57
 58	.macro	crval, clear, mmuset, ucset
 59#ifdef CONFIG_MMU
 60	.word	\clear
 61	.word	\mmuset
 62#else
 63	.word	\clear
 64	.word	\ucset
 65#endif
 66	.endm
 67
 68/*
 69 * dcache_line_size - get the minimum D-cache line size from the CTR register
 70 * on ARMv7.
 71 */
 72	.macro	dcache_line_size, reg, tmp
 
 
 
 
 
 73	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
 
 74	lsr	\tmp, \tmp, #16
 75	and	\tmp, \tmp, #0xf		@ cache line size encoding
 76	mov	\reg, #4			@ bytes per word
 77	mov	\reg, \reg, lsl \tmp		@ actual cache line size
 78	.endm
 79
 80/*
 81 * icache_line_size - get the minimum I-cache line size from the CTR register
 82 * on ARMv7.
 83 */
 84	.macro	icache_line_size, reg, tmp
 
 
 
 
 
 85	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
 
 86	and	\tmp, \tmp, #0xf		@ cache line size encoding
 87	mov	\reg, #4			@ bytes per word
 88	mov	\reg, \reg, lsl \tmp		@ actual cache line size
 89	.endm
 90
 91/*
 92 * Sanity check the PTE configuration for the code below - which makes
 93 * certain assumptions about how these bits are laid out.
 94 */
 95#ifdef CONFIG_MMU
 96#if L_PTE_SHARED != PTE_EXT_SHARED
 97#error PTE shared bit mismatch
 98#endif
 99#if !defined (CONFIG_ARM_LPAE) && \
100	(L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
101	 L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
102#error Invalid Linux PTE bit settings
103#endif
104#endif	/* CONFIG_MMU */
105
106/*
107 * The ARMv6 and ARMv7 set_pte_ext translation function.
108 *
109 * Permission translation:
110 *  YUWD  APX AP1 AP0	SVC	User
111 *  0xxx   0   0   0	no acc	no acc
112 *  100x   1   0   1	r/o	no acc
113 *  10x0   1   0   1	r/o	no acc
114 *  1011   0   0   1	r/w	no acc
115 *  110x   1   1   1	r/o	r/o
116 *  11x0   1   1   1	r/o	r/o
117 *  1111   0   1   1	r/w	r/w
118 */
119	.macro	armv6_mt_table pfx
120\pfx\()_mt_table:
121	.long	0x00						@ L_PTE_MT_UNCACHED
122	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_BUFFERABLE
123	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
124	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
125	.long	PTE_BUFFERABLE					@ L_PTE_MT_DEV_SHARED
126	.long	0x00						@ unused
127	.long	0x00						@ L_PTE_MT_MINICACHE (not present)
128	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC
129	.long	0x00						@ unused
130	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_DEV_WC
131	.long	0x00						@ unused
132	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
133	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
134	.long	0x00						@ unused
135	.long	0x00						@ unused
136	.long	PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX	@ L_PTE_MT_VECTORS
137	.endm
138
139	.macro	armv6_set_pte_ext pfx
140	str	r1, [r0], #2048			@ linux version
141
142	bic	r3, r1, #0x000003fc
143	bic	r3, r3, #PTE_TYPE_MASK
144	orr	r3, r3, r2
145	orr	r3, r3, #PTE_EXT_AP0 | 2
146
147	adr	ip, \pfx\()_mt_table
148	and	r2, r1, #L_PTE_MT_MASK
149	ldr	r2, [ip, r2]
150
151	eor	r1, r1, #L_PTE_DIRTY
152	tst	r1, #L_PTE_DIRTY|L_PTE_RDONLY
153	orrne	r3, r3, #PTE_EXT_APX
154
155	tst	r1, #L_PTE_USER
156	orrne	r3, r3, #PTE_EXT_AP1
157	tstne	r3, #PTE_EXT_APX
158
159	@ user read-only -> kernel read-only
160	bicne	r3, r3, #PTE_EXT_AP0
161
162	tst	r1, #L_PTE_XN
163	orrne	r3, r3, #PTE_EXT_XN
164
165	eor	r3, r3, r2
166
167	tst	r1, #L_PTE_YOUNG
168	tstne	r1, #L_PTE_PRESENT
169	moveq	r3, #0
170	tstne	r1, #L_PTE_NONE
171	movne	r3, #0
172
173	str	r3, [r0]
174	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
175	.endm
176
177
178/*
179 * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
180 * covering most CPUs except Xscale and Xscale 3.
181 *
182 * Permission translation:
183 *  YUWD   AP	SVC	User
184 *  0xxx  0x00	no acc	no acc
185 *  100x  0x00	r/o	no acc
186 *  10x0  0x00	r/o	no acc
187 *  1011  0x55	r/w	no acc
188 *  110x  0xaa	r/w	r/o
189 *  11x0  0xaa	r/w	r/o
190 *  1111  0xff	r/w	r/w
191 */
192	.macro	armv3_set_pte_ext wc_disable=1
193	str	r1, [r0], #2048			@ linux version
194
195	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
196
197	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
198	bic	r2, r2, #PTE_TYPE_MASK
199	orr	r2, r2, #PTE_TYPE_SMALL
200
201	tst	r3, #L_PTE_USER			@ user?
202	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
203
204	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
205	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
206
207	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
208	movne	r2, #0
209
210	.if	\wc_disable
211#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
212	tst	r2, #PTE_CACHEABLE
213	bicne	r2, r2, #PTE_BUFFERABLE
214#endif
215	.endif
216	str	r2, [r0]		@ hardware version
217	.endm
218
219
220/*
221 * Xscale set_pte_ext translation, split into two halves to cope
222 * with work-arounds.  r3 must be preserved by code between these
223 * two macros.
224 *
225 * Permission translation:
226 *  YUWD  AP	SVC	User
227 *  0xxx  00	no acc	no acc
228 *  100x  00	r/o	no acc
229 *  10x0  00	r/o	no acc
230 *  1011  01	r/w	no acc
231 *  110x  10	r/w	r/o
232 *  11x0  10	r/w	r/o
233 *  1111  11	r/w	r/w
234 */
235	.macro	xscale_set_pte_ext_prologue
236	str	r1, [r0]			@ linux version
237
238	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
239
240	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
241	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
242
243	tst	r3, #L_PTE_USER			@ user?
244	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
245
246	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
247	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
248						@ combined with user -> user r/w
249	.endm
250
251	.macro	xscale_set_pte_ext_epilogue
252	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
253	movne	r2, #0				@ no -> fault
254
255	str	r2, [r0, #2048]!		@ hardware version
256	mov	ip, #0
257	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
258	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
259	.endm
260
261.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0
262	.type	\name\()_processor_functions, #object
263	.align 2
264ENTRY(\name\()_processor_functions)
265	.word	\dabort
266	.word	\pabort
267	.word	cpu_\name\()_proc_init
268	.word	cpu_\name\()_proc_fin
269	.word	cpu_\name\()_reset
270	.word	cpu_\name\()_do_idle
271	.word	cpu_\name\()_dcache_clean_area
272	.word	cpu_\name\()_switch_mm
273
274	.if \nommu
275	.word	0
276	.else
277	.word	cpu_\name\()_set_pte_ext
278	.endif
279
280	.if \suspend
281	.word	cpu_\name\()_suspend_size
282#ifdef CONFIG_PM_SLEEP
283	.word	cpu_\name\()_do_suspend
284	.word	cpu_\name\()_do_resume
285#else
286	.word	0
287	.word	0
288#endif
289	.else
290	.word	0
291	.word	0
292	.word	0
293	.endif
294
295	.size	\name\()_processor_functions, . - \name\()_processor_functions
296.endm
297
298.macro define_cache_functions name:req
299	.align 2
300	.type	\name\()_cache_fns, #object
301ENTRY(\name\()_cache_fns)
302	.long	\name\()_flush_icache_all
303	.long	\name\()_flush_kern_cache_all
304	.long   \name\()_flush_kern_cache_louis
305	.long	\name\()_flush_user_cache_all
306	.long	\name\()_flush_user_cache_range
307	.long	\name\()_coherent_kern_range
308	.long	\name\()_coherent_user_range
309	.long	\name\()_flush_kern_dcache_area
310	.long	\name\()_dma_map_area
311	.long	\name\()_dma_unmap_area
312	.long	\name\()_dma_flush_range
313	.size	\name\()_cache_fns, . - \name\()_cache_fns
314.endm
315
316.macro define_tlb_functions name:req, flags_up:req, flags_smp
317	.type	\name\()_tlb_fns, #object
318ENTRY(\name\()_tlb_fns)
319	.long	\name\()_flush_user_tlb_range
320	.long	\name\()_flush_kern_tlb_range
321	.ifnb \flags_smp
322		ALT_SMP(.long	\flags_smp )
323		ALT_UP(.long	\flags_up )
324	.else
325		.long	\flags_up
326	.endif
327	.size	\name\()_tlb_fns, . - \name\()_tlb_fns
328.endm
329
330.macro globl_equ x, y
331	.globl	\x
332	.equ	\x, \y
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
333.endm
v4.10.11
  1/*
  2 * We need constants.h for:
  3 *  VMA_VM_MM
  4 *  VMA_VM_FLAGS
  5 *  VM_EXEC
  6 */
  7#include <asm/asm-offsets.h>
  8#include <asm/thread_info.h>
  9
 10#ifdef CONFIG_CPU_V7M
 11#include <asm/v7m.h>
 12#endif
 13
 14/*
 15 * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
 16 */
 17	.macro	vma_vm_mm, rd, rn
 18	ldr	\rd, [\rn, #VMA_VM_MM]
 19	.endm
 20
 21/*
 22 * vma_vm_flags - get vma->vm_flags
 23 */
 24	.macro	vma_vm_flags, rd, rn
 25	ldr	\rd, [\rn, #VMA_VM_FLAGS]
 26	.endm
 27
 28	.macro	tsk_mm, rd, rn
 29	ldr	\rd, [\rn, #TI_TASK]
 30	ldr	\rd, [\rd, #TSK_ACTIVE_MM]
 31	.endm
 32
 33/*
 34 * act_mm - get current->active_mm
 35 */
 36	.macro	act_mm, rd
 37	bic	\rd, sp, #8128
 38	bic	\rd, \rd, #63
 39	ldr	\rd, [\rd, #TI_TASK]
 40	ldr	\rd, [\rd, #TSK_ACTIVE_MM]
 41	.endm
 42
 43/*
 44 * mmid - get context id from mm pointer (mm->context.id)
 45 * note, this field is 64bit, so in big-endian the two words are swapped too.
 46 */
 47	.macro	mmid, rd, rn
 48#ifdef __ARMEB__
 49	ldr	\rd, [\rn, #MM_CONTEXT_ID + 4 ]
 50#else
 51	ldr	\rd, [\rn, #MM_CONTEXT_ID]
 52#endif
 53	.endm
 54
 55/*
 56 * mask_asid - mask the ASID from the context ID
 57 */
 58	.macro	asid, rd, rn
 59	and	\rd, \rn, #255
 60	.endm
 61
 62	.macro	crval, clear, mmuset, ucset
 63#ifdef CONFIG_MMU
 64	.word	\clear
 65	.word	\mmuset
 66#else
 67	.word	\clear
 68	.word	\ucset
 69#endif
 70	.endm
 71
 72/*
 73 * dcache_line_size - get the minimum D-cache line size from the CTR register
 74 * on ARMv7.
 75 */
 76	.macro	dcache_line_size, reg, tmp
 77#ifdef CONFIG_CPU_V7M
 78	movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
 79	movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
 80	ldr     \tmp, [\tmp]
 81#else
 82	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
 83#endif
 84	lsr	\tmp, \tmp, #16
 85	and	\tmp, \tmp, #0xf		@ cache line size encoding
 86	mov	\reg, #4			@ bytes per word
 87	mov	\reg, \reg, lsl \tmp		@ actual cache line size
 88	.endm
 89
 90/*
 91 * icache_line_size - get the minimum I-cache line size from the CTR register
 92 * on ARMv7.
 93 */
 94	.macro	icache_line_size, reg, tmp
 95#ifdef CONFIG_CPU_V7M
 96	movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
 97	movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
 98	ldr     \tmp, [\tmp]
 99#else
100	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
101#endif
102	and	\tmp, \tmp, #0xf		@ cache line size encoding
103	mov	\reg, #4			@ bytes per word
104	mov	\reg, \reg, lsl \tmp		@ actual cache line size
105	.endm
106
107/*
108 * Sanity check the PTE configuration for the code below - which makes
109 * certain assumptions about how these bits are laid out.
110 */
111#ifdef CONFIG_MMU
112#if L_PTE_SHARED != PTE_EXT_SHARED
113#error PTE shared bit mismatch
114#endif
115#if !defined (CONFIG_ARM_LPAE) && \
116	(L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
117	 L_PTE_PRESENT) > L_PTE_SHARED
118#error Invalid Linux PTE bit settings
119#endif
120#endif	/* CONFIG_MMU */
121
122/*
123 * The ARMv6 and ARMv7 set_pte_ext translation function.
124 *
125 * Permission translation:
126 *  YUWD  APX AP1 AP0	SVC	User
127 *  0xxx   0   0   0	no acc	no acc
128 *  100x   1   0   1	r/o	no acc
129 *  10x0   1   0   1	r/o	no acc
130 *  1011   0   0   1	r/w	no acc
131 *  110x   1   1   1	r/o	r/o
132 *  11x0   1   1   1	r/o	r/o
133 *  1111   0   1   1	r/w	r/w
134 */
135	.macro	armv6_mt_table pfx
136\pfx\()_mt_table:
137	.long	0x00						@ L_PTE_MT_UNCACHED
138	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_BUFFERABLE
139	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
140	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
141	.long	PTE_BUFFERABLE					@ L_PTE_MT_DEV_SHARED
142	.long	0x00						@ unused
143	.long	0x00						@ L_PTE_MT_MINICACHE (not present)
144	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC
145	.long	0x00						@ unused
146	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_DEV_WC
147	.long	0x00						@ unused
148	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
149	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
150	.long	0x00						@ unused
151	.long	0x00						@ unused
152	.long	PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX	@ L_PTE_MT_VECTORS
153	.endm
154
155	.macro	armv6_set_pte_ext pfx
156	str	r1, [r0], #2048			@ linux version
157
158	bic	r3, r1, #0x000003fc
159	bic	r3, r3, #PTE_TYPE_MASK
160	orr	r3, r3, r2
161	orr	r3, r3, #PTE_EXT_AP0 | 2
162
163	adr	ip, \pfx\()_mt_table
164	and	r2, r1, #L_PTE_MT_MASK
165	ldr	r2, [ip, r2]
166
167	eor	r1, r1, #L_PTE_DIRTY
168	tst	r1, #L_PTE_DIRTY|L_PTE_RDONLY
169	orrne	r3, r3, #PTE_EXT_APX
170
171	tst	r1, #L_PTE_USER
172	orrne	r3, r3, #PTE_EXT_AP1
173	tstne	r3, #PTE_EXT_APX
174
175	@ user read-only -> kernel read-only
176	bicne	r3, r3, #PTE_EXT_AP0
177
178	tst	r1, #L_PTE_XN
179	orrne	r3, r3, #PTE_EXT_XN
180
181	eor	r3, r3, r2
182
183	tst	r1, #L_PTE_YOUNG
184	tstne	r1, #L_PTE_PRESENT
185	moveq	r3, #0
186	tstne	r1, #L_PTE_NONE
187	movne	r3, #0
188
189	str	r3, [r0]
190	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
191	.endm
192
193
194/*
195 * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
196 * covering most CPUs except Xscale and Xscale 3.
197 *
198 * Permission translation:
199 *  YUWD   AP	SVC	User
200 *  0xxx  0x00	no acc	no acc
201 *  100x  0x00	r/o	no acc
202 *  10x0  0x00	r/o	no acc
203 *  1011  0x55	r/w	no acc
204 *  110x  0xaa	r/w	r/o
205 *  11x0  0xaa	r/w	r/o
206 *  1111  0xff	r/w	r/w
207 */
208	.macro	armv3_set_pte_ext wc_disable=1
209	str	r1, [r0], #2048			@ linux version
210
211	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
212
213	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
214	bic	r2, r2, #PTE_TYPE_MASK
215	orr	r2, r2, #PTE_TYPE_SMALL
216
217	tst	r3, #L_PTE_USER			@ user?
218	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
219
220	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
221	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
222
223	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
224	movne	r2, #0
225
226	.if	\wc_disable
227#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
228	tst	r2, #PTE_CACHEABLE
229	bicne	r2, r2, #PTE_BUFFERABLE
230#endif
231	.endif
232	str	r2, [r0]		@ hardware version
233	.endm
234
235
236/*
237 * Xscale set_pte_ext translation, split into two halves to cope
238 * with work-arounds.  r3 must be preserved by code between these
239 * two macros.
240 *
241 * Permission translation:
242 *  YUWD  AP	SVC	User
243 *  0xxx  00	no acc	no acc
244 *  100x  00	r/o	no acc
245 *  10x0  00	r/o	no acc
246 *  1011  01	r/w	no acc
247 *  110x  10	r/w	r/o
248 *  11x0  10	r/w	r/o
249 *  1111  11	r/w	r/w
250 */
251	.macro	xscale_set_pte_ext_prologue
252	str	r1, [r0]			@ linux version
253
254	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
255
256	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
257	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
258
259	tst	r3, #L_PTE_USER			@ user?
260	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
261
262	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
263	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
264						@ combined with user -> user r/w
265	.endm
266
267	.macro	xscale_set_pte_ext_epilogue
268	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
269	movne	r2, #0				@ no -> fault
270
271	str	r2, [r0, #2048]!		@ hardware version
272	mov	ip, #0
273	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
274	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
275	.endm
276
277.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0
278	.type	\name\()_processor_functions, #object
279	.align 2
280ENTRY(\name\()_processor_functions)
281	.word	\dabort
282	.word	\pabort
283	.word	cpu_\name\()_proc_init
284	.word	cpu_\name\()_proc_fin
285	.word	cpu_\name\()_reset
286	.word	cpu_\name\()_do_idle
287	.word	cpu_\name\()_dcache_clean_area
288	.word	cpu_\name\()_switch_mm
289
290	.if \nommu
291	.word	0
292	.else
293	.word	cpu_\name\()_set_pte_ext
294	.endif
295
296	.if \suspend
297	.word	cpu_\name\()_suspend_size
298#ifdef CONFIG_ARM_CPU_SUSPEND
299	.word	cpu_\name\()_do_suspend
300	.word	cpu_\name\()_do_resume
301#else
302	.word	0
303	.word	0
304#endif
305	.else
306	.word	0
307	.word	0
308	.word	0
309	.endif
310
311	.size	\name\()_processor_functions, . - \name\()_processor_functions
312.endm
313
314.macro define_cache_functions name:req
315	.align 2
316	.type	\name\()_cache_fns, #object
317ENTRY(\name\()_cache_fns)
318	.long	\name\()_flush_icache_all
319	.long	\name\()_flush_kern_cache_all
320	.long   \name\()_flush_kern_cache_louis
321	.long	\name\()_flush_user_cache_all
322	.long	\name\()_flush_user_cache_range
323	.long	\name\()_coherent_kern_range
324	.long	\name\()_coherent_user_range
325	.long	\name\()_flush_kern_dcache_area
326	.long	\name\()_dma_map_area
327	.long	\name\()_dma_unmap_area
328	.long	\name\()_dma_flush_range
329	.size	\name\()_cache_fns, . - \name\()_cache_fns
330.endm
331
332.macro define_tlb_functions name:req, flags_up:req, flags_smp
333	.type	\name\()_tlb_fns, #object
334ENTRY(\name\()_tlb_fns)
335	.long	\name\()_flush_user_tlb_range
336	.long	\name\()_flush_kern_tlb_range
337	.ifnb \flags_smp
338		ALT_SMP(.long	\flags_smp )
339		ALT_UP(.long	\flags_up )
340	.else
341		.long	\flags_up
342	.endif
343	.size	\name\()_tlb_fns, . - \name\()_tlb_fns
344.endm
345
346.macro globl_equ x, y
347	.globl	\x
348	.equ	\x, \y
349.endm
350
351.macro	initfn, func, base
352	.long	\func - \base
353.endm
354
355	/*
356	 * Macro to calculate the log2 size for the protection region
357	 * registers. This calculates rd = log2(size) - 1.  tmp must
358	 * not be the same register as rd.
359	 */
360.macro	pr_sz, rd, size, tmp
361	mov	\tmp, \size, lsr #12
362	mov	\rd, #11
3631:	movs	\tmp, \tmp, lsr #1
364	addne	\rd, \rd, #1
365	bne	1b
366.endm
367
368	/*
369	 * Macro to generate a protection region register value
370	 * given a pre-masked address, size, and enable bit.
371	 * Corrupts size.
372	 */
373.macro	pr_val, dest, addr, size, enable
374	pr_sz	\dest, \size, \size		@ calculate log2(size) - 1
375	orr	\dest, \addr, \dest, lsl #1	@ mask in the region size
376	orr	\dest, \dest, \enable
377.endm