Loading...
1/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
2 *
3 * This program is free software; you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License version 2 and
5 * only version 2 as published by the Free Software Foundation.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
15 * 02110-1301, USA.
16 *
17 */
18
19#include <linux/module.h>
20#include <linux/device.h>
21#include <linux/platform_device.h>
22#include <linux/clk.h>
23#include <linux/slab.h>
24#include <linux/interrupt.h>
25#include <linux/err.h>
26#include <linux/delay.h>
27#include <linux/io.h>
28#include <linux/ioport.h>
29#include <linux/uaccess.h>
30#include <linux/debugfs.h>
31#include <linux/seq_file.h>
32#include <linux/pm_runtime.h>
33
34#include <linux/usb.h>
35#include <linux/usb/otg.h>
36#include <linux/usb/ulpi.h>
37#include <linux/usb/gadget.h>
38#include <linux/usb/hcd.h>
39#include <linux/usb/msm_hsusb.h>
40#include <linux/usb/msm_hsusb_hw.h>
41#include <linux/regulator/consumer.h>
42
43#define MSM_USB_BASE (motg->regs)
44#define DRIVER_NAME "msm_otg"
45
46#define ULPI_IO_TIMEOUT_USEC (10 * 1000)
47
48#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */
49#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */
50#define USB_PHY_3P3_HPM_LOAD 50000 /* uA */
51#define USB_PHY_3P3_LPM_LOAD 4000 /* uA */
52
53#define USB_PHY_1P8_VOL_MIN 1800000 /* uV */
54#define USB_PHY_1P8_VOL_MAX 1800000 /* uV */
55#define USB_PHY_1P8_HPM_LOAD 50000 /* uA */
56#define USB_PHY_1P8_LPM_LOAD 4000 /* uA */
57
58#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */
59#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */
60
61static struct regulator *hsusb_3p3;
62static struct regulator *hsusb_1p8;
63static struct regulator *hsusb_vddcx;
64
65static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
66{
67 int ret = 0;
68
69 if (init) {
70 hsusb_vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX");
71 if (IS_ERR(hsusb_vddcx)) {
72 dev_err(motg->phy.dev, "unable to get hsusb vddcx\n");
73 return PTR_ERR(hsusb_vddcx);
74 }
75
76 ret = regulator_set_voltage(hsusb_vddcx,
77 USB_PHY_VDD_DIG_VOL_MIN,
78 USB_PHY_VDD_DIG_VOL_MAX);
79 if (ret) {
80 dev_err(motg->phy.dev, "unable to set the voltage "
81 "for hsusb vddcx\n");
82 regulator_put(hsusb_vddcx);
83 return ret;
84 }
85
86 ret = regulator_enable(hsusb_vddcx);
87 if (ret) {
88 dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
89 regulator_put(hsusb_vddcx);
90 }
91 } else {
92 ret = regulator_set_voltage(hsusb_vddcx, 0,
93 USB_PHY_VDD_DIG_VOL_MAX);
94 if (ret)
95 dev_err(motg->phy.dev, "unable to set the voltage "
96 "for hsusb vddcx\n");
97 ret = regulator_disable(hsusb_vddcx);
98 if (ret)
99 dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
100
101 regulator_put(hsusb_vddcx);
102 }
103
104 return ret;
105}
106
107static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
108{
109 int rc = 0;
110
111 if (init) {
112 hsusb_3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3");
113 if (IS_ERR(hsusb_3p3)) {
114 dev_err(motg->phy.dev, "unable to get hsusb 3p3\n");
115 return PTR_ERR(hsusb_3p3);
116 }
117
118 rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN,
119 USB_PHY_3P3_VOL_MAX);
120 if (rc) {
121 dev_err(motg->phy.dev, "unable to set voltage level "
122 "for hsusb 3p3\n");
123 goto put_3p3;
124 }
125 rc = regulator_enable(hsusb_3p3);
126 if (rc) {
127 dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
128 goto put_3p3;
129 }
130 hsusb_1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8");
131 if (IS_ERR(hsusb_1p8)) {
132 dev_err(motg->phy.dev, "unable to get hsusb 1p8\n");
133 rc = PTR_ERR(hsusb_1p8);
134 goto disable_3p3;
135 }
136 rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN,
137 USB_PHY_1P8_VOL_MAX);
138 if (rc) {
139 dev_err(motg->phy.dev, "unable to set voltage level "
140 "for hsusb 1p8\n");
141 goto put_1p8;
142 }
143 rc = regulator_enable(hsusb_1p8);
144 if (rc) {
145 dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
146 goto put_1p8;
147 }
148
149 return 0;
150 }
151
152 regulator_disable(hsusb_1p8);
153put_1p8:
154 regulator_put(hsusb_1p8);
155disable_3p3:
156 regulator_disable(hsusb_3p3);
157put_3p3:
158 regulator_put(hsusb_3p3);
159 return rc;
160}
161
162static int msm_hsusb_ldo_set_mode(int on)
163{
164 int ret = 0;
165
166 if (!hsusb_1p8 || IS_ERR(hsusb_1p8)) {
167 pr_err("%s: HSUSB_1p8 is not initialized\n", __func__);
168 return -ENODEV;
169 }
170
171 if (!hsusb_3p3 || IS_ERR(hsusb_3p3)) {
172 pr_err("%s: HSUSB_3p3 is not initialized\n", __func__);
173 return -ENODEV;
174 }
175
176 if (on) {
177 ret = regulator_set_optimum_mode(hsusb_1p8,
178 USB_PHY_1P8_HPM_LOAD);
179 if (ret < 0) {
180 pr_err("%s: Unable to set HPM of the regulator "
181 "HSUSB_1p8\n", __func__);
182 return ret;
183 }
184 ret = regulator_set_optimum_mode(hsusb_3p3,
185 USB_PHY_3P3_HPM_LOAD);
186 if (ret < 0) {
187 pr_err("%s: Unable to set HPM of the regulator "
188 "HSUSB_3p3\n", __func__);
189 regulator_set_optimum_mode(hsusb_1p8,
190 USB_PHY_1P8_LPM_LOAD);
191 return ret;
192 }
193 } else {
194 ret = regulator_set_optimum_mode(hsusb_1p8,
195 USB_PHY_1P8_LPM_LOAD);
196 if (ret < 0)
197 pr_err("%s: Unable to set LPM of the regulator "
198 "HSUSB_1p8\n", __func__);
199 ret = regulator_set_optimum_mode(hsusb_3p3,
200 USB_PHY_3P3_LPM_LOAD);
201 if (ret < 0)
202 pr_err("%s: Unable to set LPM of the regulator "
203 "HSUSB_3p3\n", __func__);
204 }
205
206 pr_debug("reg (%s)\n", on ? "HPM" : "LPM");
207 return ret < 0 ? ret : 0;
208}
209
210static int ulpi_read(struct usb_phy *phy, u32 reg)
211{
212 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
213 int cnt = 0;
214
215 /* initiate read operation */
216 writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
217 USB_ULPI_VIEWPORT);
218
219 /* wait for completion */
220 while (cnt < ULPI_IO_TIMEOUT_USEC) {
221 if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
222 break;
223 udelay(1);
224 cnt++;
225 }
226
227 if (cnt >= ULPI_IO_TIMEOUT_USEC) {
228 dev_err(phy->dev, "ulpi_read: timeout %08x\n",
229 readl(USB_ULPI_VIEWPORT));
230 return -ETIMEDOUT;
231 }
232 return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
233}
234
235static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
236{
237 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
238 int cnt = 0;
239
240 /* initiate write operation */
241 writel(ULPI_RUN | ULPI_WRITE |
242 ULPI_ADDR(reg) | ULPI_DATA(val),
243 USB_ULPI_VIEWPORT);
244
245 /* wait for completion */
246 while (cnt < ULPI_IO_TIMEOUT_USEC) {
247 if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
248 break;
249 udelay(1);
250 cnt++;
251 }
252
253 if (cnt >= ULPI_IO_TIMEOUT_USEC) {
254 dev_err(phy->dev, "ulpi_write: timeout\n");
255 return -ETIMEDOUT;
256 }
257 return 0;
258}
259
260static struct usb_phy_io_ops msm_otg_io_ops = {
261 .read = ulpi_read,
262 .write = ulpi_write,
263};
264
265static void ulpi_init(struct msm_otg *motg)
266{
267 struct msm_otg_platform_data *pdata = motg->pdata;
268 int *seq = pdata->phy_init_seq;
269
270 if (!seq)
271 return;
272
273 while (seq[0] >= 0) {
274 dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n",
275 seq[0], seq[1]);
276 ulpi_write(&motg->phy, seq[0], seq[1]);
277 seq += 2;
278 }
279}
280
281static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
282{
283 int ret = 0;
284
285 if (!motg->pdata->link_clk_reset)
286 return ret;
287
288 ret = motg->pdata->link_clk_reset(motg->clk, assert);
289 if (ret)
290 dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
291 assert ? "assert" : "deassert");
292
293 return ret;
294}
295
296static int msm_otg_phy_clk_reset(struct msm_otg *motg)
297{
298 int ret = 0;
299
300 if (!motg->pdata->phy_clk_reset)
301 return ret;
302
303 ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
304 if (ret)
305 dev_err(motg->phy.dev, "usb phy clk reset failed\n");
306
307 return ret;
308}
309
310static int msm_otg_phy_reset(struct msm_otg *motg)
311{
312 u32 val;
313 int ret;
314 int retries;
315
316 ret = msm_otg_link_clk_reset(motg, 1);
317 if (ret)
318 return ret;
319 ret = msm_otg_phy_clk_reset(motg);
320 if (ret)
321 return ret;
322 ret = msm_otg_link_clk_reset(motg, 0);
323 if (ret)
324 return ret;
325
326 val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
327 writel(val | PORTSC_PTS_ULPI, USB_PORTSC);
328
329 for (retries = 3; retries > 0; retries--) {
330 ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM,
331 ULPI_CLR(ULPI_FUNC_CTRL));
332 if (!ret)
333 break;
334 ret = msm_otg_phy_clk_reset(motg);
335 if (ret)
336 return ret;
337 }
338 if (!retries)
339 return -ETIMEDOUT;
340
341 /* This reset calibrates the phy, if the above write succeeded */
342 ret = msm_otg_phy_clk_reset(motg);
343 if (ret)
344 return ret;
345
346 for (retries = 3; retries > 0; retries--) {
347 ret = ulpi_read(&motg->phy, ULPI_DEBUG);
348 if (ret != -ETIMEDOUT)
349 break;
350 ret = msm_otg_phy_clk_reset(motg);
351 if (ret)
352 return ret;
353 }
354 if (!retries)
355 return -ETIMEDOUT;
356
357 dev_info(motg->phy.dev, "phy_reset: success\n");
358 return 0;
359}
360
361#define LINK_RESET_TIMEOUT_USEC (250 * 1000)
362static int msm_otg_reset(struct usb_phy *phy)
363{
364 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
365 struct msm_otg_platform_data *pdata = motg->pdata;
366 int cnt = 0;
367 int ret;
368 u32 val = 0;
369 u32 ulpi_val = 0;
370
371 ret = msm_otg_phy_reset(motg);
372 if (ret) {
373 dev_err(phy->dev, "phy_reset failed\n");
374 return ret;
375 }
376
377 ulpi_init(motg);
378
379 writel(USBCMD_RESET, USB_USBCMD);
380 while (cnt < LINK_RESET_TIMEOUT_USEC) {
381 if (!(readl(USB_USBCMD) & USBCMD_RESET))
382 break;
383 udelay(1);
384 cnt++;
385 }
386 if (cnt >= LINK_RESET_TIMEOUT_USEC)
387 return -ETIMEDOUT;
388
389 /* select ULPI phy */
390 writel(0x80000000, USB_PORTSC);
391
392 msleep(100);
393
394 writel(0x0, USB_AHBBURST);
395 writel(0x00, USB_AHBMODE);
396
397 if (pdata->otg_control == OTG_PHY_CONTROL) {
398 val = readl(USB_OTGSC);
399 if (pdata->mode == USB_OTG) {
400 ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
401 val |= OTGSC_IDIE | OTGSC_BSVIE;
402 } else if (pdata->mode == USB_PERIPHERAL) {
403 ulpi_val = ULPI_INT_SESS_VALID;
404 val |= OTGSC_BSVIE;
405 }
406 writel(val, USB_OTGSC);
407 ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE);
408 ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
409 }
410
411 return 0;
412}
413
414#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000)
415#define PHY_RESUME_TIMEOUT_USEC (100 * 1000)
416
417#ifdef CONFIG_PM
418
419#define USB_PHY_SUSP_DIG_VOL 500000
420static int msm_hsusb_config_vddcx(int high)
421{
422 int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
423 int min_vol;
424 int ret;
425
426 if (high)
427 min_vol = USB_PHY_VDD_DIG_VOL_MIN;
428 else
429 min_vol = USB_PHY_SUSP_DIG_VOL;
430
431 ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
432 if (ret) {
433 pr_err("%s: unable to set the voltage for regulator "
434 "HSUSB_VDDCX\n", __func__);
435 return ret;
436 }
437
438 pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
439
440 return ret;
441}
442
443static int msm_otg_suspend(struct msm_otg *motg)
444{
445 struct usb_phy *phy = &motg->phy;
446 struct usb_bus *bus = phy->otg->host;
447 struct msm_otg_platform_data *pdata = motg->pdata;
448 int cnt = 0;
449
450 if (atomic_read(&motg->in_lpm))
451 return 0;
452
453 disable_irq(motg->irq);
454 /*
455 * Chipidea 45-nm PHY suspend sequence:
456 *
457 * Interrupt Latch Register auto-clear feature is not present
458 * in all PHY versions. Latch register is clear on read type.
459 * Clear latch register to avoid spurious wakeup from
460 * low power mode (LPM).
461 *
462 * PHY comparators are disabled when PHY enters into low power
463 * mode (LPM). Keep PHY comparators ON in LPM only when we expect
464 * VBUS/Id notifications from USB PHY. Otherwise turn off USB
465 * PHY comparators. This save significant amount of power.
466 *
467 * PLL is not turned off when PHY enters into low power mode (LPM).
468 * Disable PLL for maximum power savings.
469 */
470
471 if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) {
472 ulpi_read(phy, 0x14);
473 if (pdata->otg_control == OTG_PHY_CONTROL)
474 ulpi_write(phy, 0x01, 0x30);
475 ulpi_write(phy, 0x08, 0x09);
476 }
477
478 /*
479 * PHY may take some time or even fail to enter into low power
480 * mode (LPM). Hence poll for 500 msec and reset the PHY and link
481 * in failure case.
482 */
483 writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
484 while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
485 if (readl(USB_PORTSC) & PORTSC_PHCD)
486 break;
487 udelay(1);
488 cnt++;
489 }
490
491 if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
492 dev_err(phy->dev, "Unable to suspend PHY\n");
493 msm_otg_reset(phy);
494 enable_irq(motg->irq);
495 return -ETIMEDOUT;
496 }
497
498 /*
499 * PHY has capability to generate interrupt asynchronously in low
500 * power mode (LPM). This interrupt is level triggered. So USB IRQ
501 * line must be disabled till async interrupt enable bit is cleared
502 * in USBCMD register. Assert STP (ULPI interface STOP signal) to
503 * block data communication from PHY.
504 */
505 writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
506
507 if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
508 motg->pdata->otg_control == OTG_PMIC_CONTROL)
509 writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL);
510
511 clk_disable_unprepare(motg->pclk);
512 clk_disable_unprepare(motg->clk);
513 if (motg->core_clk)
514 clk_disable_unprepare(motg->core_clk);
515
516 if (!IS_ERR(motg->pclk_src))
517 clk_disable_unprepare(motg->pclk_src);
518
519 if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
520 motg->pdata->otg_control == OTG_PMIC_CONTROL) {
521 msm_hsusb_ldo_set_mode(0);
522 msm_hsusb_config_vddcx(0);
523 }
524
525 if (device_may_wakeup(phy->dev))
526 enable_irq_wake(motg->irq);
527 if (bus)
528 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
529
530 atomic_set(&motg->in_lpm, 1);
531 enable_irq(motg->irq);
532
533 dev_info(phy->dev, "USB in low power mode\n");
534
535 return 0;
536}
537
538static int msm_otg_resume(struct msm_otg *motg)
539{
540 struct usb_phy *phy = &motg->phy;
541 struct usb_bus *bus = phy->otg->host;
542 int cnt = 0;
543 unsigned temp;
544
545 if (!atomic_read(&motg->in_lpm))
546 return 0;
547
548 if (!IS_ERR(motg->pclk_src))
549 clk_prepare_enable(motg->pclk_src);
550
551 clk_prepare_enable(motg->pclk);
552 clk_prepare_enable(motg->clk);
553 if (motg->core_clk)
554 clk_prepare_enable(motg->core_clk);
555
556 if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
557 motg->pdata->otg_control == OTG_PMIC_CONTROL) {
558 msm_hsusb_ldo_set_mode(1);
559 msm_hsusb_config_vddcx(1);
560 writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL);
561 }
562
563 temp = readl(USB_USBCMD);
564 temp &= ~ASYNC_INTR_CTRL;
565 temp &= ~ULPI_STP_CTRL;
566 writel(temp, USB_USBCMD);
567
568 /*
569 * PHY comes out of low power mode (LPM) in case of wakeup
570 * from asynchronous interrupt.
571 */
572 if (!(readl(USB_PORTSC) & PORTSC_PHCD))
573 goto skip_phy_resume;
574
575 writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
576 while (cnt < PHY_RESUME_TIMEOUT_USEC) {
577 if (!(readl(USB_PORTSC) & PORTSC_PHCD))
578 break;
579 udelay(1);
580 cnt++;
581 }
582
583 if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
584 /*
585 * This is a fatal error. Reset the link and
586 * PHY. USB state can not be restored. Re-insertion
587 * of USB cable is the only way to get USB working.
588 */
589 dev_err(phy->dev, "Unable to resume USB."
590 "Re-plugin the cable\n");
591 msm_otg_reset(phy);
592 }
593
594skip_phy_resume:
595 if (device_may_wakeup(phy->dev))
596 disable_irq_wake(motg->irq);
597 if (bus)
598 set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
599
600 atomic_set(&motg->in_lpm, 0);
601
602 if (motg->async_int) {
603 motg->async_int = 0;
604 pm_runtime_put(phy->dev);
605 enable_irq(motg->irq);
606 }
607
608 dev_info(phy->dev, "USB exited from low power mode\n");
609
610 return 0;
611}
612#endif
613
614static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA)
615{
616 if (motg->cur_power == mA)
617 return;
618
619 /* TODO: Notify PMIC about available current */
620 dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA);
621 motg->cur_power = mA;
622}
623
624static int msm_otg_set_power(struct usb_phy *phy, unsigned mA)
625{
626 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
627
628 /*
629 * Gadget driver uses set_power method to notify about the
630 * available current based on suspend/configured states.
631 *
632 * IDEV_CHG can be drawn irrespective of suspend/un-configured
633 * states when CDP/ACA is connected.
634 */
635 if (motg->chg_type == USB_SDP_CHARGER)
636 msm_otg_notify_charger(motg, mA);
637
638 return 0;
639}
640
641static void msm_otg_start_host(struct usb_phy *phy, int on)
642{
643 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
644 struct msm_otg_platform_data *pdata = motg->pdata;
645 struct usb_hcd *hcd;
646
647 if (!phy->otg->host)
648 return;
649
650 hcd = bus_to_hcd(phy->otg->host);
651
652 if (on) {
653 dev_dbg(phy->dev, "host on\n");
654
655 if (pdata->vbus_power)
656 pdata->vbus_power(1);
657 /*
658 * Some boards have a switch cotrolled by gpio
659 * to enable/disable internal HUB. Enable internal
660 * HUB before kicking the host.
661 */
662 if (pdata->setup_gpio)
663 pdata->setup_gpio(OTG_STATE_A_HOST);
664#ifdef CONFIG_USB
665 usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
666 device_wakeup_enable(hcd->self.controller);
667#endif
668 } else {
669 dev_dbg(phy->dev, "host off\n");
670
671#ifdef CONFIG_USB
672 usb_remove_hcd(hcd);
673#endif
674 if (pdata->setup_gpio)
675 pdata->setup_gpio(OTG_STATE_UNDEFINED);
676 if (pdata->vbus_power)
677 pdata->vbus_power(0);
678 }
679}
680
681static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
682{
683 struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy);
684 struct usb_hcd *hcd;
685
686 /*
687 * Fail host registration if this board can support
688 * only peripheral configuration.
689 */
690 if (motg->pdata->mode == USB_PERIPHERAL) {
691 dev_info(otg->phy->dev, "Host mode is not supported\n");
692 return -ENODEV;
693 }
694
695 if (!host) {
696 if (otg->phy->state == OTG_STATE_A_HOST) {
697 pm_runtime_get_sync(otg->phy->dev);
698 msm_otg_start_host(otg->phy, 0);
699 otg->host = NULL;
700 otg->phy->state = OTG_STATE_UNDEFINED;
701 schedule_work(&motg->sm_work);
702 } else {
703 otg->host = NULL;
704 }
705
706 return 0;
707 }
708
709 hcd = bus_to_hcd(host);
710 hcd->power_budget = motg->pdata->power_budget;
711
712 otg->host = host;
713 dev_dbg(otg->phy->dev, "host driver registered w/ tranceiver\n");
714
715 /*
716 * Kick the state machine work, if peripheral is not supported
717 * or peripheral is already registered with us.
718 */
719 if (motg->pdata->mode == USB_HOST || otg->gadget) {
720 pm_runtime_get_sync(otg->phy->dev);
721 schedule_work(&motg->sm_work);
722 }
723
724 return 0;
725}
726
727static void msm_otg_start_peripheral(struct usb_phy *phy, int on)
728{
729 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
730 struct msm_otg_platform_data *pdata = motg->pdata;
731
732 if (!phy->otg->gadget)
733 return;
734
735 if (on) {
736 dev_dbg(phy->dev, "gadget on\n");
737 /*
738 * Some boards have a switch cotrolled by gpio
739 * to enable/disable internal HUB. Disable internal
740 * HUB before kicking the gadget.
741 */
742 if (pdata->setup_gpio)
743 pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
744 usb_gadget_vbus_connect(phy->otg->gadget);
745 } else {
746 dev_dbg(phy->dev, "gadget off\n");
747 usb_gadget_vbus_disconnect(phy->otg->gadget);
748 if (pdata->setup_gpio)
749 pdata->setup_gpio(OTG_STATE_UNDEFINED);
750 }
751
752}
753
754static int msm_otg_set_peripheral(struct usb_otg *otg,
755 struct usb_gadget *gadget)
756{
757 struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy);
758
759 /*
760 * Fail peripheral registration if this board can support
761 * only host configuration.
762 */
763 if (motg->pdata->mode == USB_HOST) {
764 dev_info(otg->phy->dev, "Peripheral mode is not supported\n");
765 return -ENODEV;
766 }
767
768 if (!gadget) {
769 if (otg->phy->state == OTG_STATE_B_PERIPHERAL) {
770 pm_runtime_get_sync(otg->phy->dev);
771 msm_otg_start_peripheral(otg->phy, 0);
772 otg->gadget = NULL;
773 otg->phy->state = OTG_STATE_UNDEFINED;
774 schedule_work(&motg->sm_work);
775 } else {
776 otg->gadget = NULL;
777 }
778
779 return 0;
780 }
781 otg->gadget = gadget;
782 dev_dbg(otg->phy->dev, "peripheral driver registered w/ tranceiver\n");
783
784 /*
785 * Kick the state machine work, if host is not supported
786 * or host is already registered with us.
787 */
788 if (motg->pdata->mode == USB_PERIPHERAL || otg->host) {
789 pm_runtime_get_sync(otg->phy->dev);
790 schedule_work(&motg->sm_work);
791 }
792
793 return 0;
794}
795
796static bool msm_chg_check_secondary_det(struct msm_otg *motg)
797{
798 struct usb_phy *phy = &motg->phy;
799 u32 chg_det;
800 bool ret = false;
801
802 switch (motg->pdata->phy_type) {
803 case CI_45NM_INTEGRATED_PHY:
804 chg_det = ulpi_read(phy, 0x34);
805 ret = chg_det & (1 << 4);
806 break;
807 case SNPS_28NM_INTEGRATED_PHY:
808 chg_det = ulpi_read(phy, 0x87);
809 ret = chg_det & 1;
810 break;
811 default:
812 break;
813 }
814 return ret;
815}
816
817static void msm_chg_enable_secondary_det(struct msm_otg *motg)
818{
819 struct usb_phy *phy = &motg->phy;
820 u32 chg_det;
821
822 switch (motg->pdata->phy_type) {
823 case CI_45NM_INTEGRATED_PHY:
824 chg_det = ulpi_read(phy, 0x34);
825 /* Turn off charger block */
826 chg_det |= ~(1 << 1);
827 ulpi_write(phy, chg_det, 0x34);
828 udelay(20);
829 /* control chg block via ULPI */
830 chg_det &= ~(1 << 3);
831 ulpi_write(phy, chg_det, 0x34);
832 /* put it in host mode for enabling D- source */
833 chg_det &= ~(1 << 2);
834 ulpi_write(phy, chg_det, 0x34);
835 /* Turn on chg detect block */
836 chg_det &= ~(1 << 1);
837 ulpi_write(phy, chg_det, 0x34);
838 udelay(20);
839 /* enable chg detection */
840 chg_det &= ~(1 << 0);
841 ulpi_write(phy, chg_det, 0x34);
842 break;
843 case SNPS_28NM_INTEGRATED_PHY:
844 /*
845 * Configure DM as current source, DP as current sink
846 * and enable battery charging comparators.
847 */
848 ulpi_write(phy, 0x8, 0x85);
849 ulpi_write(phy, 0x2, 0x85);
850 ulpi_write(phy, 0x1, 0x85);
851 break;
852 default:
853 break;
854 }
855}
856
857static bool msm_chg_check_primary_det(struct msm_otg *motg)
858{
859 struct usb_phy *phy = &motg->phy;
860 u32 chg_det;
861 bool ret = false;
862
863 switch (motg->pdata->phy_type) {
864 case CI_45NM_INTEGRATED_PHY:
865 chg_det = ulpi_read(phy, 0x34);
866 ret = chg_det & (1 << 4);
867 break;
868 case SNPS_28NM_INTEGRATED_PHY:
869 chg_det = ulpi_read(phy, 0x87);
870 ret = chg_det & 1;
871 break;
872 default:
873 break;
874 }
875 return ret;
876}
877
878static void msm_chg_enable_primary_det(struct msm_otg *motg)
879{
880 struct usb_phy *phy = &motg->phy;
881 u32 chg_det;
882
883 switch (motg->pdata->phy_type) {
884 case CI_45NM_INTEGRATED_PHY:
885 chg_det = ulpi_read(phy, 0x34);
886 /* enable chg detection */
887 chg_det &= ~(1 << 0);
888 ulpi_write(phy, chg_det, 0x34);
889 break;
890 case SNPS_28NM_INTEGRATED_PHY:
891 /*
892 * Configure DP as current source, DM as current sink
893 * and enable battery charging comparators.
894 */
895 ulpi_write(phy, 0x2, 0x85);
896 ulpi_write(phy, 0x1, 0x85);
897 break;
898 default:
899 break;
900 }
901}
902
903static bool msm_chg_check_dcd(struct msm_otg *motg)
904{
905 struct usb_phy *phy = &motg->phy;
906 u32 line_state;
907 bool ret = false;
908
909 switch (motg->pdata->phy_type) {
910 case CI_45NM_INTEGRATED_PHY:
911 line_state = ulpi_read(phy, 0x15);
912 ret = !(line_state & 1);
913 break;
914 case SNPS_28NM_INTEGRATED_PHY:
915 line_state = ulpi_read(phy, 0x87);
916 ret = line_state & 2;
917 break;
918 default:
919 break;
920 }
921 return ret;
922}
923
924static void msm_chg_disable_dcd(struct msm_otg *motg)
925{
926 struct usb_phy *phy = &motg->phy;
927 u32 chg_det;
928
929 switch (motg->pdata->phy_type) {
930 case CI_45NM_INTEGRATED_PHY:
931 chg_det = ulpi_read(phy, 0x34);
932 chg_det &= ~(1 << 5);
933 ulpi_write(phy, chg_det, 0x34);
934 break;
935 case SNPS_28NM_INTEGRATED_PHY:
936 ulpi_write(phy, 0x10, 0x86);
937 break;
938 default:
939 break;
940 }
941}
942
943static void msm_chg_enable_dcd(struct msm_otg *motg)
944{
945 struct usb_phy *phy = &motg->phy;
946 u32 chg_det;
947
948 switch (motg->pdata->phy_type) {
949 case CI_45NM_INTEGRATED_PHY:
950 chg_det = ulpi_read(phy, 0x34);
951 /* Turn on D+ current source */
952 chg_det |= (1 << 5);
953 ulpi_write(phy, chg_det, 0x34);
954 break;
955 case SNPS_28NM_INTEGRATED_PHY:
956 /* Data contact detection enable */
957 ulpi_write(phy, 0x10, 0x85);
958 break;
959 default:
960 break;
961 }
962}
963
964static void msm_chg_block_on(struct msm_otg *motg)
965{
966 struct usb_phy *phy = &motg->phy;
967 u32 func_ctrl, chg_det;
968
969 /* put the controller in non-driving mode */
970 func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
971 func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
972 func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
973 ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
974
975 switch (motg->pdata->phy_type) {
976 case CI_45NM_INTEGRATED_PHY:
977 chg_det = ulpi_read(phy, 0x34);
978 /* control chg block via ULPI */
979 chg_det &= ~(1 << 3);
980 ulpi_write(phy, chg_det, 0x34);
981 /* Turn on chg detect block */
982 chg_det &= ~(1 << 1);
983 ulpi_write(phy, chg_det, 0x34);
984 udelay(20);
985 break;
986 case SNPS_28NM_INTEGRATED_PHY:
987 /* Clear charger detecting control bits */
988 ulpi_write(phy, 0x3F, 0x86);
989 /* Clear alt interrupt latch and enable bits */
990 ulpi_write(phy, 0x1F, 0x92);
991 ulpi_write(phy, 0x1F, 0x95);
992 udelay(100);
993 break;
994 default:
995 break;
996 }
997}
998
999static void msm_chg_block_off(struct msm_otg *motg)
1000{
1001 struct usb_phy *phy = &motg->phy;
1002 u32 func_ctrl, chg_det;
1003
1004 switch (motg->pdata->phy_type) {
1005 case CI_45NM_INTEGRATED_PHY:
1006 chg_det = ulpi_read(phy, 0x34);
1007 /* Turn off charger block */
1008 chg_det |= ~(1 << 1);
1009 ulpi_write(phy, chg_det, 0x34);
1010 break;
1011 case SNPS_28NM_INTEGRATED_PHY:
1012 /* Clear charger detecting control bits */
1013 ulpi_write(phy, 0x3F, 0x86);
1014 /* Clear alt interrupt latch and enable bits */
1015 ulpi_write(phy, 0x1F, 0x92);
1016 ulpi_write(phy, 0x1F, 0x95);
1017 break;
1018 default:
1019 break;
1020 }
1021
1022 /* put the controller in normal mode */
1023 func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
1024 func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
1025 func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
1026 ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
1027}
1028
1029#define MSM_CHG_DCD_POLL_TIME (100 * HZ/1000) /* 100 msec */
1030#define MSM_CHG_DCD_MAX_RETRIES 6 /* Tdcd_tmout = 6 * 100 msec */
1031#define MSM_CHG_PRIMARY_DET_TIME (40 * HZ/1000) /* TVDPSRC_ON */
1032#define MSM_CHG_SECONDARY_DET_TIME (40 * HZ/1000) /* TVDMSRC_ON */
1033static void msm_chg_detect_work(struct work_struct *w)
1034{
1035 struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work);
1036 struct usb_phy *phy = &motg->phy;
1037 bool is_dcd, tmout, vout;
1038 unsigned long delay;
1039
1040 dev_dbg(phy->dev, "chg detection work\n");
1041 switch (motg->chg_state) {
1042 case USB_CHG_STATE_UNDEFINED:
1043 pm_runtime_get_sync(phy->dev);
1044 msm_chg_block_on(motg);
1045 msm_chg_enable_dcd(motg);
1046 motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
1047 motg->dcd_retries = 0;
1048 delay = MSM_CHG_DCD_POLL_TIME;
1049 break;
1050 case USB_CHG_STATE_WAIT_FOR_DCD:
1051 is_dcd = msm_chg_check_dcd(motg);
1052 tmout = ++motg->dcd_retries == MSM_CHG_DCD_MAX_RETRIES;
1053 if (is_dcd || tmout) {
1054 msm_chg_disable_dcd(motg);
1055 msm_chg_enable_primary_det(motg);
1056 delay = MSM_CHG_PRIMARY_DET_TIME;
1057 motg->chg_state = USB_CHG_STATE_DCD_DONE;
1058 } else {
1059 delay = MSM_CHG_DCD_POLL_TIME;
1060 }
1061 break;
1062 case USB_CHG_STATE_DCD_DONE:
1063 vout = msm_chg_check_primary_det(motg);
1064 if (vout) {
1065 msm_chg_enable_secondary_det(motg);
1066 delay = MSM_CHG_SECONDARY_DET_TIME;
1067 motg->chg_state = USB_CHG_STATE_PRIMARY_DONE;
1068 } else {
1069 motg->chg_type = USB_SDP_CHARGER;
1070 motg->chg_state = USB_CHG_STATE_DETECTED;
1071 delay = 0;
1072 }
1073 break;
1074 case USB_CHG_STATE_PRIMARY_DONE:
1075 vout = msm_chg_check_secondary_det(motg);
1076 if (vout)
1077 motg->chg_type = USB_DCP_CHARGER;
1078 else
1079 motg->chg_type = USB_CDP_CHARGER;
1080 motg->chg_state = USB_CHG_STATE_SECONDARY_DONE;
1081 /* fall through */
1082 case USB_CHG_STATE_SECONDARY_DONE:
1083 motg->chg_state = USB_CHG_STATE_DETECTED;
1084 case USB_CHG_STATE_DETECTED:
1085 msm_chg_block_off(motg);
1086 dev_dbg(phy->dev, "charger = %d\n", motg->chg_type);
1087 schedule_work(&motg->sm_work);
1088 return;
1089 default:
1090 return;
1091 }
1092
1093 schedule_delayed_work(&motg->chg_work, delay);
1094}
1095
1096/*
1097 * We support OTG, Peripheral only and Host only configurations. In case
1098 * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
1099 * via Id pin status or user request (debugfs). Id/BSV interrupts are not
1100 * enabled when switch is controlled by user and default mode is supplied
1101 * by board file, which can be changed by userspace later.
1102 */
1103static void msm_otg_init_sm(struct msm_otg *motg)
1104{
1105 struct msm_otg_platform_data *pdata = motg->pdata;
1106 u32 otgsc = readl(USB_OTGSC);
1107
1108 switch (pdata->mode) {
1109 case USB_OTG:
1110 if (pdata->otg_control == OTG_PHY_CONTROL) {
1111 if (otgsc & OTGSC_ID)
1112 set_bit(ID, &motg->inputs);
1113 else
1114 clear_bit(ID, &motg->inputs);
1115
1116 if (otgsc & OTGSC_BSV)
1117 set_bit(B_SESS_VLD, &motg->inputs);
1118 else
1119 clear_bit(B_SESS_VLD, &motg->inputs);
1120 } else if (pdata->otg_control == OTG_USER_CONTROL) {
1121 if (pdata->default_mode == USB_HOST) {
1122 clear_bit(ID, &motg->inputs);
1123 } else if (pdata->default_mode == USB_PERIPHERAL) {
1124 set_bit(ID, &motg->inputs);
1125 set_bit(B_SESS_VLD, &motg->inputs);
1126 } else {
1127 set_bit(ID, &motg->inputs);
1128 clear_bit(B_SESS_VLD, &motg->inputs);
1129 }
1130 }
1131 break;
1132 case USB_HOST:
1133 clear_bit(ID, &motg->inputs);
1134 break;
1135 case USB_PERIPHERAL:
1136 set_bit(ID, &motg->inputs);
1137 if (otgsc & OTGSC_BSV)
1138 set_bit(B_SESS_VLD, &motg->inputs);
1139 else
1140 clear_bit(B_SESS_VLD, &motg->inputs);
1141 break;
1142 default:
1143 break;
1144 }
1145}
1146
1147static void msm_otg_sm_work(struct work_struct *w)
1148{
1149 struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
1150 struct usb_otg *otg = motg->phy.otg;
1151
1152 switch (otg->phy->state) {
1153 case OTG_STATE_UNDEFINED:
1154 dev_dbg(otg->phy->dev, "OTG_STATE_UNDEFINED state\n");
1155 msm_otg_reset(otg->phy);
1156 msm_otg_init_sm(motg);
1157 otg->phy->state = OTG_STATE_B_IDLE;
1158 /* FALL THROUGH */
1159 case OTG_STATE_B_IDLE:
1160 dev_dbg(otg->phy->dev, "OTG_STATE_B_IDLE state\n");
1161 if (!test_bit(ID, &motg->inputs) && otg->host) {
1162 /* disable BSV bit */
1163 writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
1164 msm_otg_start_host(otg->phy, 1);
1165 otg->phy->state = OTG_STATE_A_HOST;
1166 } else if (test_bit(B_SESS_VLD, &motg->inputs)) {
1167 switch (motg->chg_state) {
1168 case USB_CHG_STATE_UNDEFINED:
1169 msm_chg_detect_work(&motg->chg_work.work);
1170 break;
1171 case USB_CHG_STATE_DETECTED:
1172 switch (motg->chg_type) {
1173 case USB_DCP_CHARGER:
1174 msm_otg_notify_charger(motg,
1175 IDEV_CHG_MAX);
1176 break;
1177 case USB_CDP_CHARGER:
1178 msm_otg_notify_charger(motg,
1179 IDEV_CHG_MAX);
1180 msm_otg_start_peripheral(otg->phy, 1);
1181 otg->phy->state
1182 = OTG_STATE_B_PERIPHERAL;
1183 break;
1184 case USB_SDP_CHARGER:
1185 msm_otg_notify_charger(motg, IUNIT);
1186 msm_otg_start_peripheral(otg->phy, 1);
1187 otg->phy->state
1188 = OTG_STATE_B_PERIPHERAL;
1189 break;
1190 default:
1191 break;
1192 }
1193 break;
1194 default:
1195 break;
1196 }
1197 } else {
1198 /*
1199 * If charger detection work is pending, decrement
1200 * the pm usage counter to balance with the one that
1201 * is incremented in charger detection work.
1202 */
1203 if (cancel_delayed_work_sync(&motg->chg_work)) {
1204 pm_runtime_put_sync(otg->phy->dev);
1205 msm_otg_reset(otg->phy);
1206 }
1207 msm_otg_notify_charger(motg, 0);
1208 motg->chg_state = USB_CHG_STATE_UNDEFINED;
1209 motg->chg_type = USB_INVALID_CHARGER;
1210 }
1211 pm_runtime_put_sync(otg->phy->dev);
1212 break;
1213 case OTG_STATE_B_PERIPHERAL:
1214 dev_dbg(otg->phy->dev, "OTG_STATE_B_PERIPHERAL state\n");
1215 if (!test_bit(B_SESS_VLD, &motg->inputs) ||
1216 !test_bit(ID, &motg->inputs)) {
1217 msm_otg_notify_charger(motg, 0);
1218 msm_otg_start_peripheral(otg->phy, 0);
1219 motg->chg_state = USB_CHG_STATE_UNDEFINED;
1220 motg->chg_type = USB_INVALID_CHARGER;
1221 otg->phy->state = OTG_STATE_B_IDLE;
1222 msm_otg_reset(otg->phy);
1223 schedule_work(w);
1224 }
1225 break;
1226 case OTG_STATE_A_HOST:
1227 dev_dbg(otg->phy->dev, "OTG_STATE_A_HOST state\n");
1228 if (test_bit(ID, &motg->inputs)) {
1229 msm_otg_start_host(otg->phy, 0);
1230 otg->phy->state = OTG_STATE_B_IDLE;
1231 msm_otg_reset(otg->phy);
1232 schedule_work(w);
1233 }
1234 break;
1235 default:
1236 break;
1237 }
1238}
1239
1240static irqreturn_t msm_otg_irq(int irq, void *data)
1241{
1242 struct msm_otg *motg = data;
1243 struct usb_phy *phy = &motg->phy;
1244 u32 otgsc = 0;
1245
1246 if (atomic_read(&motg->in_lpm)) {
1247 disable_irq_nosync(irq);
1248 motg->async_int = 1;
1249 pm_runtime_get(phy->dev);
1250 return IRQ_HANDLED;
1251 }
1252
1253 otgsc = readl(USB_OTGSC);
1254 if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
1255 return IRQ_NONE;
1256
1257 if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
1258 if (otgsc & OTGSC_ID)
1259 set_bit(ID, &motg->inputs);
1260 else
1261 clear_bit(ID, &motg->inputs);
1262 dev_dbg(phy->dev, "ID set/clear\n");
1263 pm_runtime_get_noresume(phy->dev);
1264 } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
1265 if (otgsc & OTGSC_BSV)
1266 set_bit(B_SESS_VLD, &motg->inputs);
1267 else
1268 clear_bit(B_SESS_VLD, &motg->inputs);
1269 dev_dbg(phy->dev, "BSV set/clear\n");
1270 pm_runtime_get_noresume(phy->dev);
1271 }
1272
1273 writel(otgsc, USB_OTGSC);
1274 schedule_work(&motg->sm_work);
1275 return IRQ_HANDLED;
1276}
1277
1278static int msm_otg_mode_show(struct seq_file *s, void *unused)
1279{
1280 struct msm_otg *motg = s->private;
1281 struct usb_otg *otg = motg->phy.otg;
1282
1283 switch (otg->phy->state) {
1284 case OTG_STATE_A_HOST:
1285 seq_printf(s, "host\n");
1286 break;
1287 case OTG_STATE_B_PERIPHERAL:
1288 seq_printf(s, "peripheral\n");
1289 break;
1290 default:
1291 seq_printf(s, "none\n");
1292 break;
1293 }
1294
1295 return 0;
1296}
1297
1298static int msm_otg_mode_open(struct inode *inode, struct file *file)
1299{
1300 return single_open(file, msm_otg_mode_show, inode->i_private);
1301}
1302
1303static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
1304 size_t count, loff_t *ppos)
1305{
1306 struct seq_file *s = file->private_data;
1307 struct msm_otg *motg = s->private;
1308 char buf[16];
1309 struct usb_otg *otg = motg->phy.otg;
1310 int status = count;
1311 enum usb_mode_type req_mode;
1312
1313 memset(buf, 0x00, sizeof(buf));
1314
1315 if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
1316 status = -EFAULT;
1317 goto out;
1318 }
1319
1320 if (!strncmp(buf, "host", 4)) {
1321 req_mode = USB_HOST;
1322 } else if (!strncmp(buf, "peripheral", 10)) {
1323 req_mode = USB_PERIPHERAL;
1324 } else if (!strncmp(buf, "none", 4)) {
1325 req_mode = USB_NONE;
1326 } else {
1327 status = -EINVAL;
1328 goto out;
1329 }
1330
1331 switch (req_mode) {
1332 case USB_NONE:
1333 switch (otg->phy->state) {
1334 case OTG_STATE_A_HOST:
1335 case OTG_STATE_B_PERIPHERAL:
1336 set_bit(ID, &motg->inputs);
1337 clear_bit(B_SESS_VLD, &motg->inputs);
1338 break;
1339 default:
1340 goto out;
1341 }
1342 break;
1343 case USB_PERIPHERAL:
1344 switch (otg->phy->state) {
1345 case OTG_STATE_B_IDLE:
1346 case OTG_STATE_A_HOST:
1347 set_bit(ID, &motg->inputs);
1348 set_bit(B_SESS_VLD, &motg->inputs);
1349 break;
1350 default:
1351 goto out;
1352 }
1353 break;
1354 case USB_HOST:
1355 switch (otg->phy->state) {
1356 case OTG_STATE_B_IDLE:
1357 case OTG_STATE_B_PERIPHERAL:
1358 clear_bit(ID, &motg->inputs);
1359 break;
1360 default:
1361 goto out;
1362 }
1363 break;
1364 default:
1365 goto out;
1366 }
1367
1368 pm_runtime_get_sync(otg->phy->dev);
1369 schedule_work(&motg->sm_work);
1370out:
1371 return status;
1372}
1373
1374const struct file_operations msm_otg_mode_fops = {
1375 .open = msm_otg_mode_open,
1376 .read = seq_read,
1377 .write = msm_otg_mode_write,
1378 .llseek = seq_lseek,
1379 .release = single_release,
1380};
1381
1382static struct dentry *msm_otg_dbg_root;
1383static struct dentry *msm_otg_dbg_mode;
1384
1385static int msm_otg_debugfs_init(struct msm_otg *motg)
1386{
1387 msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
1388
1389 if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
1390 return -ENODEV;
1391
1392 msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
1393 msm_otg_dbg_root, motg, &msm_otg_mode_fops);
1394 if (!msm_otg_dbg_mode) {
1395 debugfs_remove(msm_otg_dbg_root);
1396 msm_otg_dbg_root = NULL;
1397 return -ENODEV;
1398 }
1399
1400 return 0;
1401}
1402
1403static void msm_otg_debugfs_cleanup(void)
1404{
1405 debugfs_remove(msm_otg_dbg_mode);
1406 debugfs_remove(msm_otg_dbg_root);
1407}
1408
1409static int __init msm_otg_probe(struct platform_device *pdev)
1410{
1411 int ret = 0;
1412 struct resource *res;
1413 struct msm_otg *motg;
1414 struct usb_phy *phy;
1415
1416 dev_info(&pdev->dev, "msm_otg probe\n");
1417 if (!dev_get_platdata(&pdev->dev)) {
1418 dev_err(&pdev->dev, "No platform data given. Bailing out\n");
1419 return -ENODEV;
1420 }
1421
1422 motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL);
1423 if (!motg) {
1424 dev_err(&pdev->dev, "unable to allocate msm_otg\n");
1425 return -ENOMEM;
1426 }
1427
1428 motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
1429 if (!motg->phy.otg) {
1430 dev_err(&pdev->dev, "unable to allocate msm_otg\n");
1431 ret = -ENOMEM;
1432 goto free_motg;
1433 }
1434
1435 motg->pdata = dev_get_platdata(&pdev->dev);
1436 phy = &motg->phy;
1437 phy->dev = &pdev->dev;
1438
1439 motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk");
1440 if (IS_ERR(motg->phy_reset_clk)) {
1441 dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
1442 ret = PTR_ERR(motg->phy_reset_clk);
1443 goto free_motg;
1444 }
1445
1446 motg->clk = clk_get(&pdev->dev, "usb_hs_clk");
1447 if (IS_ERR(motg->clk)) {
1448 dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
1449 ret = PTR_ERR(motg->clk);
1450 goto put_phy_reset_clk;
1451 }
1452 clk_set_rate(motg->clk, 60000000);
1453
1454 /*
1455 * If USB Core is running its protocol engine based on CORE CLK,
1456 * CORE CLK must be running at >55Mhz for correct HSUSB
1457 * operation and USB core cannot tolerate frequency changes on
1458 * CORE CLK. For such USB cores, vote for maximum clk frequency
1459 * on pclk source
1460 */
1461 if (motg->pdata->pclk_src_name) {
1462 motg->pclk_src = clk_get(&pdev->dev,
1463 motg->pdata->pclk_src_name);
1464 if (IS_ERR(motg->pclk_src))
1465 goto put_clk;
1466 clk_set_rate(motg->pclk_src, INT_MAX);
1467 clk_prepare_enable(motg->pclk_src);
1468 } else
1469 motg->pclk_src = ERR_PTR(-ENOENT);
1470
1471
1472 motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk");
1473 if (IS_ERR(motg->pclk)) {
1474 dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
1475 ret = PTR_ERR(motg->pclk);
1476 goto put_pclk_src;
1477 }
1478
1479 /*
1480 * USB core clock is not present on all MSM chips. This
1481 * clock is introduced to remove the dependency on AXI
1482 * bus frequency.
1483 */
1484 motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk");
1485 if (IS_ERR(motg->core_clk))
1486 motg->core_clk = NULL;
1487
1488 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1489 if (!res) {
1490 dev_err(&pdev->dev, "failed to get platform resource mem\n");
1491 ret = -ENODEV;
1492 goto put_core_clk;
1493 }
1494
1495 motg->regs = ioremap(res->start, resource_size(res));
1496 if (!motg->regs) {
1497 dev_err(&pdev->dev, "ioremap failed\n");
1498 ret = -ENOMEM;
1499 goto put_core_clk;
1500 }
1501 dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
1502
1503 motg->irq = platform_get_irq(pdev, 0);
1504 if (!motg->irq) {
1505 dev_err(&pdev->dev, "platform_get_irq failed\n");
1506 ret = -ENODEV;
1507 goto free_regs;
1508 }
1509
1510 clk_prepare_enable(motg->clk);
1511 clk_prepare_enable(motg->pclk);
1512
1513 ret = msm_hsusb_init_vddcx(motg, 1);
1514 if (ret) {
1515 dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
1516 goto free_regs;
1517 }
1518
1519 ret = msm_hsusb_ldo_init(motg, 1);
1520 if (ret) {
1521 dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
1522 goto vddcx_exit;
1523 }
1524 ret = msm_hsusb_ldo_set_mode(1);
1525 if (ret) {
1526 dev_err(&pdev->dev, "hsusb vreg enable failed\n");
1527 goto ldo_exit;
1528 }
1529
1530 if (motg->core_clk)
1531 clk_prepare_enable(motg->core_clk);
1532
1533 writel(0, USB_USBINTR);
1534 writel(0, USB_OTGSC);
1535
1536 INIT_WORK(&motg->sm_work, msm_otg_sm_work);
1537 INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work);
1538 ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED,
1539 "msm_otg", motg);
1540 if (ret) {
1541 dev_err(&pdev->dev, "request irq failed\n");
1542 goto disable_clks;
1543 }
1544
1545 phy->init = msm_otg_reset;
1546 phy->set_power = msm_otg_set_power;
1547
1548 phy->io_ops = &msm_otg_io_ops;
1549
1550 phy->otg->phy = &motg->phy;
1551 phy->otg->set_host = msm_otg_set_host;
1552 phy->otg->set_peripheral = msm_otg_set_peripheral;
1553
1554 ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2);
1555 if (ret) {
1556 dev_err(&pdev->dev, "usb_add_phy failed\n");
1557 goto free_irq;
1558 }
1559
1560 platform_set_drvdata(pdev, motg);
1561 device_init_wakeup(&pdev->dev, 1);
1562
1563 if (motg->pdata->mode == USB_OTG &&
1564 motg->pdata->otg_control == OTG_USER_CONTROL) {
1565 ret = msm_otg_debugfs_init(motg);
1566 if (ret)
1567 dev_dbg(&pdev->dev, "mode debugfs file is"
1568 "not available\n");
1569 }
1570
1571 pm_runtime_set_active(&pdev->dev);
1572 pm_runtime_enable(&pdev->dev);
1573
1574 return 0;
1575free_irq:
1576 free_irq(motg->irq, motg);
1577disable_clks:
1578 clk_disable_unprepare(motg->pclk);
1579 clk_disable_unprepare(motg->clk);
1580ldo_exit:
1581 msm_hsusb_ldo_init(motg, 0);
1582vddcx_exit:
1583 msm_hsusb_init_vddcx(motg, 0);
1584free_regs:
1585 iounmap(motg->regs);
1586put_core_clk:
1587 if (motg->core_clk)
1588 clk_put(motg->core_clk);
1589 clk_put(motg->pclk);
1590put_pclk_src:
1591 if (!IS_ERR(motg->pclk_src)) {
1592 clk_disable_unprepare(motg->pclk_src);
1593 clk_put(motg->pclk_src);
1594 }
1595put_clk:
1596 clk_put(motg->clk);
1597put_phy_reset_clk:
1598 clk_put(motg->phy_reset_clk);
1599free_motg:
1600 kfree(motg->phy.otg);
1601 kfree(motg);
1602 return ret;
1603}
1604
1605static int msm_otg_remove(struct platform_device *pdev)
1606{
1607 struct msm_otg *motg = platform_get_drvdata(pdev);
1608 struct usb_phy *phy = &motg->phy;
1609 int cnt = 0;
1610
1611 if (phy->otg->host || phy->otg->gadget)
1612 return -EBUSY;
1613
1614 msm_otg_debugfs_cleanup();
1615 cancel_delayed_work_sync(&motg->chg_work);
1616 cancel_work_sync(&motg->sm_work);
1617
1618 pm_runtime_resume(&pdev->dev);
1619
1620 device_init_wakeup(&pdev->dev, 0);
1621 pm_runtime_disable(&pdev->dev);
1622
1623 usb_remove_phy(phy);
1624 free_irq(motg->irq, motg);
1625
1626 /*
1627 * Put PHY in low power mode.
1628 */
1629 ulpi_read(phy, 0x14);
1630 ulpi_write(phy, 0x08, 0x09);
1631
1632 writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
1633 while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
1634 if (readl(USB_PORTSC) & PORTSC_PHCD)
1635 break;
1636 udelay(1);
1637 cnt++;
1638 }
1639 if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
1640 dev_err(phy->dev, "Unable to suspend PHY\n");
1641
1642 clk_disable_unprepare(motg->pclk);
1643 clk_disable_unprepare(motg->clk);
1644 if (motg->core_clk)
1645 clk_disable_unprepare(motg->core_clk);
1646 if (!IS_ERR(motg->pclk_src)) {
1647 clk_disable_unprepare(motg->pclk_src);
1648 clk_put(motg->pclk_src);
1649 }
1650 msm_hsusb_ldo_init(motg, 0);
1651
1652 iounmap(motg->regs);
1653 pm_runtime_set_suspended(&pdev->dev);
1654
1655 clk_put(motg->phy_reset_clk);
1656 clk_put(motg->pclk);
1657 clk_put(motg->clk);
1658 if (motg->core_clk)
1659 clk_put(motg->core_clk);
1660
1661 kfree(motg->phy.otg);
1662 kfree(motg);
1663
1664 return 0;
1665}
1666
1667#ifdef CONFIG_PM_RUNTIME
1668static int msm_otg_runtime_idle(struct device *dev)
1669{
1670 struct msm_otg *motg = dev_get_drvdata(dev);
1671 struct usb_otg *otg = motg->phy.otg;
1672
1673 dev_dbg(dev, "OTG runtime idle\n");
1674
1675 /*
1676 * It is observed some times that a spurious interrupt
1677 * comes when PHY is put into LPM immediately after PHY reset.
1678 * This 1 sec delay also prevents entering into LPM immediately
1679 * after asynchronous interrupt.
1680 */
1681 if (otg->phy->state != OTG_STATE_UNDEFINED)
1682 pm_schedule_suspend(dev, 1000);
1683
1684 return -EAGAIN;
1685}
1686
1687static int msm_otg_runtime_suspend(struct device *dev)
1688{
1689 struct msm_otg *motg = dev_get_drvdata(dev);
1690
1691 dev_dbg(dev, "OTG runtime suspend\n");
1692 return msm_otg_suspend(motg);
1693}
1694
1695static int msm_otg_runtime_resume(struct device *dev)
1696{
1697 struct msm_otg *motg = dev_get_drvdata(dev);
1698
1699 dev_dbg(dev, "OTG runtime resume\n");
1700 return msm_otg_resume(motg);
1701}
1702#endif
1703
1704#ifdef CONFIG_PM_SLEEP
1705static int msm_otg_pm_suspend(struct device *dev)
1706{
1707 struct msm_otg *motg = dev_get_drvdata(dev);
1708
1709 dev_dbg(dev, "OTG PM suspend\n");
1710 return msm_otg_suspend(motg);
1711}
1712
1713static int msm_otg_pm_resume(struct device *dev)
1714{
1715 struct msm_otg *motg = dev_get_drvdata(dev);
1716 int ret;
1717
1718 dev_dbg(dev, "OTG PM resume\n");
1719
1720 ret = msm_otg_resume(motg);
1721 if (ret)
1722 return ret;
1723
1724 /*
1725 * Runtime PM Documentation recommends bringing the
1726 * device to full powered state upon resume.
1727 */
1728 pm_runtime_disable(dev);
1729 pm_runtime_set_active(dev);
1730 pm_runtime_enable(dev);
1731
1732 return 0;
1733}
1734#endif
1735
1736static const struct dev_pm_ops msm_otg_dev_pm_ops = {
1737 SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
1738 SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
1739 msm_otg_runtime_idle)
1740};
1741
1742static struct platform_driver msm_otg_driver = {
1743 .remove = msm_otg_remove,
1744 .driver = {
1745 .name = DRIVER_NAME,
1746 .owner = THIS_MODULE,
1747 .pm = &msm_otg_dev_pm_ops,
1748 },
1749};
1750
1751module_platform_driver_probe(msm_otg_driver, msm_otg_probe);
1752
1753MODULE_LICENSE("GPL v2");
1754MODULE_DESCRIPTION("MSM USB transceiver driver");
1/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
2 *
3 * This program is free software; you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License version 2 and
5 * only version 2 as published by the Free Software Foundation.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
15 * 02110-1301, USA.
16 *
17 */
18
19#include <linux/module.h>
20#include <linux/device.h>
21#include <linux/extcon.h>
22#include <linux/gpio/consumer.h>
23#include <linux/platform_device.h>
24#include <linux/clk.h>
25#include <linux/slab.h>
26#include <linux/interrupt.h>
27#include <linux/err.h>
28#include <linux/delay.h>
29#include <linux/io.h>
30#include <linux/ioport.h>
31#include <linux/uaccess.h>
32#include <linux/debugfs.h>
33#include <linux/seq_file.h>
34#include <linux/pm_runtime.h>
35#include <linux/of.h>
36#include <linux/of_device.h>
37#include <linux/reboot.h>
38#include <linux/reset.h>
39#include <linux/types.h>
40#include <linux/usb/otg.h>
41
42#include <linux/usb.h>
43#include <linux/usb/otg.h>
44#include <linux/usb/of.h>
45#include <linux/usb/ulpi.h>
46#include <linux/usb/gadget.h>
47#include <linux/usb/hcd.h>
48#include <linux/usb/msm_hsusb_hw.h>
49#include <linux/regulator/consumer.h>
50
51/**
52 * OTG control
53 *
54 * OTG_NO_CONTROL Id/VBUS notifications not required. Useful in host
55 * only configuration.
56 * OTG_PHY_CONTROL Id/VBUS notifications comes form USB PHY.
57 * OTG_PMIC_CONTROL Id/VBUS notifications comes from PMIC hardware.
58 * OTG_USER_CONTROL Id/VBUS notifcations comes from User via sysfs.
59 *
60 */
61enum otg_control_type {
62 OTG_NO_CONTROL = 0,
63 OTG_PHY_CONTROL,
64 OTG_PMIC_CONTROL,
65 OTG_USER_CONTROL,
66};
67
68/**
69 * PHY used in
70 *
71 * INVALID_PHY Unsupported PHY
72 * CI_45NM_INTEGRATED_PHY Chipidea 45nm integrated PHY
73 * SNPS_28NM_INTEGRATED_PHY Synopsis 28nm integrated PHY
74 *
75 */
76enum msm_usb_phy_type {
77 INVALID_PHY = 0,
78 CI_45NM_INTEGRATED_PHY,
79 SNPS_28NM_INTEGRATED_PHY,
80};
81
82#define IDEV_CHG_MAX 1500
83#define IUNIT 100
84
85/**
86 * Different states involved in USB charger detection.
87 *
88 * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
89 * process is not yet started.
90 * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
91 * USB_CHG_STATE_DCD_DONE Data pin contact is detected.
92 * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
93 * between SDP and DCP/CDP).
94 * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
95 * between DCP and CDP).
96 * USB_CHG_STATE_DETECTED USB charger type is determined.
97 *
98 */
99enum usb_chg_state {
100 USB_CHG_STATE_UNDEFINED = 0,
101 USB_CHG_STATE_WAIT_FOR_DCD,
102 USB_CHG_STATE_DCD_DONE,
103 USB_CHG_STATE_PRIMARY_DONE,
104 USB_CHG_STATE_SECONDARY_DONE,
105 USB_CHG_STATE_DETECTED,
106};
107
108/**
109 * USB charger types
110 *
111 * USB_INVALID_CHARGER Invalid USB charger.
112 * USB_SDP_CHARGER Standard downstream port. Refers to a downstream port
113 * on USB2.0 compliant host/hub.
114 * USB_DCP_CHARGER Dedicated charger port (AC charger/ Wall charger).
115 * USB_CDP_CHARGER Charging downstream port. Enumeration can happen and
116 * IDEV_CHG_MAX can be drawn irrespective of USB state.
117 *
118 */
119enum usb_chg_type {
120 USB_INVALID_CHARGER = 0,
121 USB_SDP_CHARGER,
122 USB_DCP_CHARGER,
123 USB_CDP_CHARGER,
124};
125
126/**
127 * struct msm_otg_platform_data - platform device data
128 * for msm_otg driver.
129 * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
130 * "do not overwrite default vaule at this address".
131 * @phy_init_sz: PHY configuration sequence size.
132 * @vbus_power: VBUS power on/off routine.
133 * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
134 * @mode: Supported mode (OTG/peripheral/host).
135 * @otg_control: OTG switch controlled by user/Id pin
136 */
137struct msm_otg_platform_data {
138 int *phy_init_seq;
139 int phy_init_sz;
140 void (*vbus_power)(bool on);
141 unsigned power_budget;
142 enum usb_dr_mode mode;
143 enum otg_control_type otg_control;
144 enum msm_usb_phy_type phy_type;
145 void (*setup_gpio)(enum usb_otg_state state);
146};
147
148/**
149 * struct msm_usb_cable - structure for exteternal connector cable
150 * state tracking
151 * @nb: hold event notification callback
152 * @conn: used for notification registration
153 */
154struct msm_usb_cable {
155 struct notifier_block nb;
156 struct extcon_dev *extcon;
157};
158
159/**
160 * struct msm_otg: OTG driver data. Shared by HCD and DCD.
161 * @otg: USB OTG Transceiver structure.
162 * @pdata: otg device platform data.
163 * @irq: IRQ number assigned for HSUSB controller.
164 * @clk: clock struct of usb_hs_clk.
165 * @pclk: clock struct of usb_hs_pclk.
166 * @core_clk: clock struct of usb_hs_core_clk.
167 * @regs: ioremapped register base address.
168 * @inputs: OTG state machine inputs(Id, SessValid etc).
169 * @sm_work: OTG state machine work.
170 * @in_lpm: indicates low power mode (LPM) state.
171 * @async_int: Async interrupt arrived.
172 * @cur_power: The amount of mA available from downstream port.
173 * @chg_work: Charger detection work.
174 * @chg_state: The state of charger detection process.
175 * @chg_type: The type of charger attached.
176 * @dcd_retires: The retry count used to track Data contact
177 * detection process.
178 * @manual_pullup: true if VBUS is not routed to USB controller/phy
179 * and controller driver therefore enables pull-up explicitly before
180 * starting controller using usbcmd run/stop bit.
181 * @vbus: VBUS signal state trakining, using extcon framework
182 * @id: ID signal state trakining, using extcon framework
183 * @switch_gpio: Descriptor for GPIO used to control external Dual
184 * SPDT USB Switch.
185 * @reboot: Used to inform the driver to route USB D+/D- line to Device
186 * connector
187 */
188struct msm_otg {
189 struct usb_phy phy;
190 struct msm_otg_platform_data *pdata;
191 int irq;
192 struct clk *clk;
193 struct clk *pclk;
194 struct clk *core_clk;
195 void __iomem *regs;
196#define ID 0
197#define B_SESS_VLD 1
198 unsigned long inputs;
199 struct work_struct sm_work;
200 atomic_t in_lpm;
201 int async_int;
202 unsigned cur_power;
203 int phy_number;
204 struct delayed_work chg_work;
205 enum usb_chg_state chg_state;
206 enum usb_chg_type chg_type;
207 u8 dcd_retries;
208 struct regulator *v3p3;
209 struct regulator *v1p8;
210 struct regulator *vddcx;
211
212 struct reset_control *phy_rst;
213 struct reset_control *link_rst;
214 int vdd_levels[3];
215
216 bool manual_pullup;
217
218 struct msm_usb_cable vbus;
219 struct msm_usb_cable id;
220
221 struct gpio_desc *switch_gpio;
222 struct notifier_block reboot;
223};
224
225#define MSM_USB_BASE (motg->regs)
226#define DRIVER_NAME "msm_otg"
227
228#define ULPI_IO_TIMEOUT_USEC (10 * 1000)
229#define LINK_RESET_TIMEOUT_USEC (250 * 1000)
230
231#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */
232#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */
233#define USB_PHY_3P3_HPM_LOAD 50000 /* uA */
234#define USB_PHY_3P3_LPM_LOAD 4000 /* uA */
235
236#define USB_PHY_1P8_VOL_MIN 1800000 /* uV */
237#define USB_PHY_1P8_VOL_MAX 1800000 /* uV */
238#define USB_PHY_1P8_HPM_LOAD 50000 /* uA */
239#define USB_PHY_1P8_LPM_LOAD 4000 /* uA */
240
241#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */
242#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */
243#define USB_PHY_SUSP_DIG_VOL 500000 /* uV */
244
245enum vdd_levels {
246 VDD_LEVEL_NONE = 0,
247 VDD_LEVEL_MIN,
248 VDD_LEVEL_MAX,
249};
250
251static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
252{
253 int ret = 0;
254
255 if (init) {
256 ret = regulator_set_voltage(motg->vddcx,
257 motg->vdd_levels[VDD_LEVEL_MIN],
258 motg->vdd_levels[VDD_LEVEL_MAX]);
259 if (ret) {
260 dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
261 return ret;
262 }
263
264 ret = regulator_enable(motg->vddcx);
265 if (ret)
266 dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
267 } else {
268 ret = regulator_set_voltage(motg->vddcx, 0,
269 motg->vdd_levels[VDD_LEVEL_MAX]);
270 if (ret)
271 dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
272 ret = regulator_disable(motg->vddcx);
273 if (ret)
274 dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
275 }
276
277 return ret;
278}
279
280static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
281{
282 int rc = 0;
283
284 if (init) {
285 rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
286 USB_PHY_3P3_VOL_MAX);
287 if (rc) {
288 dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n");
289 goto exit;
290 }
291 rc = regulator_enable(motg->v3p3);
292 if (rc) {
293 dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
294 goto exit;
295 }
296 rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
297 USB_PHY_1P8_VOL_MAX);
298 if (rc) {
299 dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n");
300 goto disable_3p3;
301 }
302 rc = regulator_enable(motg->v1p8);
303 if (rc) {
304 dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
305 goto disable_3p3;
306 }
307
308 return 0;
309 }
310
311 regulator_disable(motg->v1p8);
312disable_3p3:
313 regulator_disable(motg->v3p3);
314exit:
315 return rc;
316}
317
318static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
319{
320 int ret = 0;
321
322 if (on) {
323 ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_HPM_LOAD);
324 if (ret < 0) {
325 pr_err("Could not set HPM for v1p8\n");
326 return ret;
327 }
328 ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_HPM_LOAD);
329 if (ret < 0) {
330 pr_err("Could not set HPM for v3p3\n");
331 regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
332 return ret;
333 }
334 } else {
335 ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
336 if (ret < 0)
337 pr_err("Could not set LPM for v1p8\n");
338 ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_LPM_LOAD);
339 if (ret < 0)
340 pr_err("Could not set LPM for v3p3\n");
341 }
342
343 pr_debug("reg (%s)\n", on ? "HPM" : "LPM");
344 return ret < 0 ? ret : 0;
345}
346
347static int ulpi_read(struct usb_phy *phy, u32 reg)
348{
349 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
350 int cnt = 0;
351
352 /* initiate read operation */
353 writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
354 USB_ULPI_VIEWPORT);
355
356 /* wait for completion */
357 while (cnt < ULPI_IO_TIMEOUT_USEC) {
358 if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
359 break;
360 udelay(1);
361 cnt++;
362 }
363
364 if (cnt >= ULPI_IO_TIMEOUT_USEC) {
365 dev_err(phy->dev, "ulpi_read: timeout %08x\n",
366 readl(USB_ULPI_VIEWPORT));
367 return -ETIMEDOUT;
368 }
369 return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
370}
371
372static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
373{
374 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
375 int cnt = 0;
376
377 /* initiate write operation */
378 writel(ULPI_RUN | ULPI_WRITE |
379 ULPI_ADDR(reg) | ULPI_DATA(val),
380 USB_ULPI_VIEWPORT);
381
382 /* wait for completion */
383 while (cnt < ULPI_IO_TIMEOUT_USEC) {
384 if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
385 break;
386 udelay(1);
387 cnt++;
388 }
389
390 if (cnt >= ULPI_IO_TIMEOUT_USEC) {
391 dev_err(phy->dev, "ulpi_write: timeout\n");
392 return -ETIMEDOUT;
393 }
394 return 0;
395}
396
397static struct usb_phy_io_ops msm_otg_io_ops = {
398 .read = ulpi_read,
399 .write = ulpi_write,
400};
401
402static void ulpi_init(struct msm_otg *motg)
403{
404 struct msm_otg_platform_data *pdata = motg->pdata;
405 int *seq = pdata->phy_init_seq, idx;
406 u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
407
408 for (idx = 0; idx < pdata->phy_init_sz; idx++) {
409 if (seq[idx] == -1)
410 continue;
411
412 dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n",
413 seq[idx], addr + idx);
414 ulpi_write(&motg->phy, seq[idx], addr + idx);
415 }
416}
417
418static int msm_phy_notify_disconnect(struct usb_phy *phy,
419 enum usb_device_speed speed)
420{
421 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
422 int val;
423
424 if (motg->manual_pullup) {
425 val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL;
426 usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A));
427 }
428
429 /*
430 * Put the transceiver in non-driving mode. Otherwise host
431 * may not detect soft-disconnection.
432 */
433 val = ulpi_read(phy, ULPI_FUNC_CTRL);
434 val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
435 val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
436 ulpi_write(phy, val, ULPI_FUNC_CTRL);
437
438 return 0;
439}
440
441static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
442{
443 int ret;
444
445 if (assert)
446 ret = reset_control_assert(motg->link_rst);
447 else
448 ret = reset_control_deassert(motg->link_rst);
449
450 if (ret)
451 dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
452 assert ? "assert" : "deassert");
453
454 return ret;
455}
456
457static int msm_otg_phy_clk_reset(struct msm_otg *motg)
458{
459 int ret = 0;
460
461 if (motg->phy_rst)
462 ret = reset_control_reset(motg->phy_rst);
463
464 if (ret)
465 dev_err(motg->phy.dev, "usb phy clk reset failed\n");
466
467 return ret;
468}
469
470static int msm_link_reset(struct msm_otg *motg)
471{
472 u32 val;
473 int ret;
474
475 ret = msm_otg_link_clk_reset(motg, 1);
476 if (ret)
477 return ret;
478
479 /* wait for 1ms delay as suggested in HPG. */
480 usleep_range(1000, 1200);
481
482 ret = msm_otg_link_clk_reset(motg, 0);
483 if (ret)
484 return ret;
485
486 if (motg->phy_number)
487 writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
488
489 /* put transceiver in serial mode as part of reset */
490 val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
491 writel(val | PORTSC_PTS_SERIAL, USB_PORTSC);
492
493 return 0;
494}
495
496static int msm_otg_reset(struct usb_phy *phy)
497{
498 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
499 int cnt = 0;
500
501 writel(USBCMD_RESET, USB_USBCMD);
502 while (cnt < LINK_RESET_TIMEOUT_USEC) {
503 if (!(readl(USB_USBCMD) & USBCMD_RESET))
504 break;
505 udelay(1);
506 cnt++;
507 }
508 if (cnt >= LINK_RESET_TIMEOUT_USEC)
509 return -ETIMEDOUT;
510
511 /* select ULPI phy and clear other status/control bits in PORTSC */
512 writel(PORTSC_PTS_ULPI, USB_PORTSC);
513
514 writel(0x0, USB_AHBBURST);
515 writel(0x08, USB_AHBMODE);
516
517 if (motg->phy_number)
518 writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
519 return 0;
520}
521
522static void msm_phy_reset(struct msm_otg *motg)
523{
524 void __iomem *addr;
525
526 if (motg->pdata->phy_type != SNPS_28NM_INTEGRATED_PHY) {
527 msm_otg_phy_clk_reset(motg);
528 return;
529 }
530
531 addr = USB_PHY_CTRL;
532 if (motg->phy_number)
533 addr = USB_PHY_CTRL2;
534
535 /* Assert USB PHY_POR */
536 writel(readl(addr) | PHY_POR_ASSERT, addr);
537
538 /*
539 * wait for minimum 10 microseconds as suggested in HPG.
540 * Use a slightly larger value since the exact value didn't
541 * work 100% of the time.
542 */
543 udelay(12);
544
545 /* Deassert USB PHY_POR */
546 writel(readl(addr) & ~PHY_POR_ASSERT, addr);
547}
548
549static int msm_usb_reset(struct usb_phy *phy)
550{
551 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
552 int ret;
553
554 if (!IS_ERR(motg->core_clk))
555 clk_prepare_enable(motg->core_clk);
556
557 ret = msm_link_reset(motg);
558 if (ret) {
559 dev_err(phy->dev, "phy_reset failed\n");
560 return ret;
561 }
562
563 ret = msm_otg_reset(&motg->phy);
564 if (ret) {
565 dev_err(phy->dev, "link reset failed\n");
566 return ret;
567 }
568
569 msleep(100);
570
571 /* Reset USB PHY after performing USB Link RESET */
572 msm_phy_reset(motg);
573
574 if (!IS_ERR(motg->core_clk))
575 clk_disable_unprepare(motg->core_clk);
576
577 return 0;
578}
579
580static int msm_phy_init(struct usb_phy *phy)
581{
582 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
583 struct msm_otg_platform_data *pdata = motg->pdata;
584 u32 val, ulpi_val = 0;
585
586 /* Program USB PHY Override registers. */
587 ulpi_init(motg);
588
589 /*
590 * It is recommended in HPG to reset USB PHY after programming
591 * USB PHY Override registers.
592 */
593 msm_phy_reset(motg);
594
595 if (pdata->otg_control == OTG_PHY_CONTROL) {
596 val = readl(USB_OTGSC);
597 if (pdata->mode == USB_DR_MODE_OTG) {
598 ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
599 val |= OTGSC_IDIE | OTGSC_BSVIE;
600 } else if (pdata->mode == USB_DR_MODE_PERIPHERAL) {
601 ulpi_val = ULPI_INT_SESS_VALID;
602 val |= OTGSC_BSVIE;
603 }
604 writel(val, USB_OTGSC);
605 ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE);
606 ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
607 }
608
609 if (motg->manual_pullup) {
610 val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT;
611 ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A));
612
613 val = readl(USB_GENCONFIG_2);
614 val |= GENCONFIG_2_SESS_VLD_CTRL_EN;
615 writel(val, USB_GENCONFIG_2);
616
617 val = readl(USB_USBCMD);
618 val |= USBCMD_SESS_VLD_CTRL;
619 writel(val, USB_USBCMD);
620
621 val = ulpi_read(phy, ULPI_FUNC_CTRL);
622 val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
623 val |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
624 ulpi_write(phy, val, ULPI_FUNC_CTRL);
625 }
626
627 if (motg->phy_number)
628 writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
629
630 return 0;
631}
632
633#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000)
634#define PHY_RESUME_TIMEOUT_USEC (100 * 1000)
635
636#ifdef CONFIG_PM
637
638static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high)
639{
640 int max_vol = motg->vdd_levels[VDD_LEVEL_MAX];
641 int min_vol;
642 int ret;
643
644 if (high)
645 min_vol = motg->vdd_levels[VDD_LEVEL_MIN];
646 else
647 min_vol = motg->vdd_levels[VDD_LEVEL_NONE];
648
649 ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol);
650 if (ret) {
651 pr_err("Cannot set vddcx voltage\n");
652 return ret;
653 }
654
655 pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
656
657 return ret;
658}
659
660static int msm_otg_suspend(struct msm_otg *motg)
661{
662 struct usb_phy *phy = &motg->phy;
663 struct usb_bus *bus = phy->otg->host;
664 struct msm_otg_platform_data *pdata = motg->pdata;
665 void __iomem *addr;
666 int cnt = 0;
667
668 if (atomic_read(&motg->in_lpm))
669 return 0;
670
671 disable_irq(motg->irq);
672 /*
673 * Chipidea 45-nm PHY suspend sequence:
674 *
675 * Interrupt Latch Register auto-clear feature is not present
676 * in all PHY versions. Latch register is clear on read type.
677 * Clear latch register to avoid spurious wakeup from
678 * low power mode (LPM).
679 *
680 * PHY comparators are disabled when PHY enters into low power
681 * mode (LPM). Keep PHY comparators ON in LPM only when we expect
682 * VBUS/Id notifications from USB PHY. Otherwise turn off USB
683 * PHY comparators. This save significant amount of power.
684 *
685 * PLL is not turned off when PHY enters into low power mode (LPM).
686 * Disable PLL for maximum power savings.
687 */
688
689 if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) {
690 ulpi_read(phy, 0x14);
691 if (pdata->otg_control == OTG_PHY_CONTROL)
692 ulpi_write(phy, 0x01, 0x30);
693 ulpi_write(phy, 0x08, 0x09);
694 }
695
696 /*
697 * PHY may take some time or even fail to enter into low power
698 * mode (LPM). Hence poll for 500 msec and reset the PHY and link
699 * in failure case.
700 */
701 writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
702 while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
703 if (readl(USB_PORTSC) & PORTSC_PHCD)
704 break;
705 udelay(1);
706 cnt++;
707 }
708
709 if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
710 dev_err(phy->dev, "Unable to suspend PHY\n");
711 msm_otg_reset(phy);
712 enable_irq(motg->irq);
713 return -ETIMEDOUT;
714 }
715
716 /*
717 * PHY has capability to generate interrupt asynchronously in low
718 * power mode (LPM). This interrupt is level triggered. So USB IRQ
719 * line must be disabled till async interrupt enable bit is cleared
720 * in USBCMD register. Assert STP (ULPI interface STOP signal) to
721 * block data communication from PHY.
722 */
723 writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
724
725 addr = USB_PHY_CTRL;
726 if (motg->phy_number)
727 addr = USB_PHY_CTRL2;
728
729 if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
730 motg->pdata->otg_control == OTG_PMIC_CONTROL)
731 writel(readl(addr) | PHY_RETEN, addr);
732
733 clk_disable_unprepare(motg->pclk);
734 clk_disable_unprepare(motg->clk);
735 if (!IS_ERR(motg->core_clk))
736 clk_disable_unprepare(motg->core_clk);
737
738 if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
739 motg->pdata->otg_control == OTG_PMIC_CONTROL) {
740 msm_hsusb_ldo_set_mode(motg, 0);
741 msm_hsusb_config_vddcx(motg, 0);
742 }
743
744 if (device_may_wakeup(phy->dev))
745 enable_irq_wake(motg->irq);
746 if (bus)
747 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
748
749 atomic_set(&motg->in_lpm, 1);
750 enable_irq(motg->irq);
751
752 dev_info(phy->dev, "USB in low power mode\n");
753
754 return 0;
755}
756
757static int msm_otg_resume(struct msm_otg *motg)
758{
759 struct usb_phy *phy = &motg->phy;
760 struct usb_bus *bus = phy->otg->host;
761 void __iomem *addr;
762 int cnt = 0;
763 unsigned temp;
764
765 if (!atomic_read(&motg->in_lpm))
766 return 0;
767
768 clk_prepare_enable(motg->pclk);
769 clk_prepare_enable(motg->clk);
770 if (!IS_ERR(motg->core_clk))
771 clk_prepare_enable(motg->core_clk);
772
773 if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
774 motg->pdata->otg_control == OTG_PMIC_CONTROL) {
775
776 addr = USB_PHY_CTRL;
777 if (motg->phy_number)
778 addr = USB_PHY_CTRL2;
779
780 msm_hsusb_ldo_set_mode(motg, 1);
781 msm_hsusb_config_vddcx(motg, 1);
782 writel(readl(addr) & ~PHY_RETEN, addr);
783 }
784
785 temp = readl(USB_USBCMD);
786 temp &= ~ASYNC_INTR_CTRL;
787 temp &= ~ULPI_STP_CTRL;
788 writel(temp, USB_USBCMD);
789
790 /*
791 * PHY comes out of low power mode (LPM) in case of wakeup
792 * from asynchronous interrupt.
793 */
794 if (!(readl(USB_PORTSC) & PORTSC_PHCD))
795 goto skip_phy_resume;
796
797 writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
798 while (cnt < PHY_RESUME_TIMEOUT_USEC) {
799 if (!(readl(USB_PORTSC) & PORTSC_PHCD))
800 break;
801 udelay(1);
802 cnt++;
803 }
804
805 if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
806 /*
807 * This is a fatal error. Reset the link and
808 * PHY. USB state can not be restored. Re-insertion
809 * of USB cable is the only way to get USB working.
810 */
811 dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n");
812 msm_otg_reset(phy);
813 }
814
815skip_phy_resume:
816 if (device_may_wakeup(phy->dev))
817 disable_irq_wake(motg->irq);
818 if (bus)
819 set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
820
821 atomic_set(&motg->in_lpm, 0);
822
823 if (motg->async_int) {
824 motg->async_int = 0;
825 pm_runtime_put(phy->dev);
826 enable_irq(motg->irq);
827 }
828
829 dev_info(phy->dev, "USB exited from low power mode\n");
830
831 return 0;
832}
833#endif
834
835static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA)
836{
837 if (motg->cur_power == mA)
838 return;
839
840 /* TODO: Notify PMIC about available current */
841 dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA);
842 motg->cur_power = mA;
843}
844
845static int msm_otg_set_power(struct usb_phy *phy, unsigned mA)
846{
847 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
848
849 /*
850 * Gadget driver uses set_power method to notify about the
851 * available current based on suspend/configured states.
852 *
853 * IDEV_CHG can be drawn irrespective of suspend/un-configured
854 * states when CDP/ACA is connected.
855 */
856 if (motg->chg_type == USB_SDP_CHARGER)
857 msm_otg_notify_charger(motg, mA);
858
859 return 0;
860}
861
862static void msm_otg_start_host(struct usb_phy *phy, int on)
863{
864 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
865 struct msm_otg_platform_data *pdata = motg->pdata;
866 struct usb_hcd *hcd;
867
868 if (!phy->otg->host)
869 return;
870
871 hcd = bus_to_hcd(phy->otg->host);
872
873 if (on) {
874 dev_dbg(phy->dev, "host on\n");
875
876 if (pdata->vbus_power)
877 pdata->vbus_power(1);
878 /*
879 * Some boards have a switch cotrolled by gpio
880 * to enable/disable internal HUB. Enable internal
881 * HUB before kicking the host.
882 */
883 if (pdata->setup_gpio)
884 pdata->setup_gpio(OTG_STATE_A_HOST);
885#ifdef CONFIG_USB
886 usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
887 device_wakeup_enable(hcd->self.controller);
888#endif
889 } else {
890 dev_dbg(phy->dev, "host off\n");
891
892#ifdef CONFIG_USB
893 usb_remove_hcd(hcd);
894#endif
895 if (pdata->setup_gpio)
896 pdata->setup_gpio(OTG_STATE_UNDEFINED);
897 if (pdata->vbus_power)
898 pdata->vbus_power(0);
899 }
900}
901
902static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
903{
904 struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
905 struct usb_hcd *hcd;
906
907 /*
908 * Fail host registration if this board can support
909 * only peripheral configuration.
910 */
911 if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL) {
912 dev_info(otg->usb_phy->dev, "Host mode is not supported\n");
913 return -ENODEV;
914 }
915
916 if (!host) {
917 if (otg->state == OTG_STATE_A_HOST) {
918 pm_runtime_get_sync(otg->usb_phy->dev);
919 msm_otg_start_host(otg->usb_phy, 0);
920 otg->host = NULL;
921 otg->state = OTG_STATE_UNDEFINED;
922 schedule_work(&motg->sm_work);
923 } else {
924 otg->host = NULL;
925 }
926
927 return 0;
928 }
929
930 hcd = bus_to_hcd(host);
931 hcd->power_budget = motg->pdata->power_budget;
932
933 otg->host = host;
934 dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n");
935
936 pm_runtime_get_sync(otg->usb_phy->dev);
937 schedule_work(&motg->sm_work);
938
939 return 0;
940}
941
942static void msm_otg_start_peripheral(struct usb_phy *phy, int on)
943{
944 struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
945 struct msm_otg_platform_data *pdata = motg->pdata;
946
947 if (!phy->otg->gadget)
948 return;
949
950 if (on) {
951 dev_dbg(phy->dev, "gadget on\n");
952 /*
953 * Some boards have a switch cotrolled by gpio
954 * to enable/disable internal HUB. Disable internal
955 * HUB before kicking the gadget.
956 */
957 if (pdata->setup_gpio)
958 pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
959 usb_gadget_vbus_connect(phy->otg->gadget);
960 } else {
961 dev_dbg(phy->dev, "gadget off\n");
962 usb_gadget_vbus_disconnect(phy->otg->gadget);
963 if (pdata->setup_gpio)
964 pdata->setup_gpio(OTG_STATE_UNDEFINED);
965 }
966
967}
968
969static int msm_otg_set_peripheral(struct usb_otg *otg,
970 struct usb_gadget *gadget)
971{
972 struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
973
974 /*
975 * Fail peripheral registration if this board can support
976 * only host configuration.
977 */
978 if (motg->pdata->mode == USB_DR_MODE_HOST) {
979 dev_info(otg->usb_phy->dev, "Peripheral mode is not supported\n");
980 return -ENODEV;
981 }
982
983 if (!gadget) {
984 if (otg->state == OTG_STATE_B_PERIPHERAL) {
985 pm_runtime_get_sync(otg->usb_phy->dev);
986 msm_otg_start_peripheral(otg->usb_phy, 0);
987 otg->gadget = NULL;
988 otg->state = OTG_STATE_UNDEFINED;
989 schedule_work(&motg->sm_work);
990 } else {
991 otg->gadget = NULL;
992 }
993
994 return 0;
995 }
996 otg->gadget = gadget;
997 dev_dbg(otg->usb_phy->dev,
998 "peripheral driver registered w/ tranceiver\n");
999
1000 pm_runtime_get_sync(otg->usb_phy->dev);
1001 schedule_work(&motg->sm_work);
1002
1003 return 0;
1004}
1005
1006static bool msm_chg_check_secondary_det(struct msm_otg *motg)
1007{
1008 struct usb_phy *phy = &motg->phy;
1009 u32 chg_det;
1010 bool ret = false;
1011
1012 switch (motg->pdata->phy_type) {
1013 case CI_45NM_INTEGRATED_PHY:
1014 chg_det = ulpi_read(phy, 0x34);
1015 ret = chg_det & (1 << 4);
1016 break;
1017 case SNPS_28NM_INTEGRATED_PHY:
1018 chg_det = ulpi_read(phy, 0x87);
1019 ret = chg_det & 1;
1020 break;
1021 default:
1022 break;
1023 }
1024 return ret;
1025}
1026
1027static void msm_chg_enable_secondary_det(struct msm_otg *motg)
1028{
1029 struct usb_phy *phy = &motg->phy;
1030 u32 chg_det;
1031
1032 switch (motg->pdata->phy_type) {
1033 case CI_45NM_INTEGRATED_PHY:
1034 chg_det = ulpi_read(phy, 0x34);
1035 /* Turn off charger block */
1036 chg_det |= ~(1 << 1);
1037 ulpi_write(phy, chg_det, 0x34);
1038 udelay(20);
1039 /* control chg block via ULPI */
1040 chg_det &= ~(1 << 3);
1041 ulpi_write(phy, chg_det, 0x34);
1042 /* put it in host mode for enabling D- source */
1043 chg_det &= ~(1 << 2);
1044 ulpi_write(phy, chg_det, 0x34);
1045 /* Turn on chg detect block */
1046 chg_det &= ~(1 << 1);
1047 ulpi_write(phy, chg_det, 0x34);
1048 udelay(20);
1049 /* enable chg detection */
1050 chg_det &= ~(1 << 0);
1051 ulpi_write(phy, chg_det, 0x34);
1052 break;
1053 case SNPS_28NM_INTEGRATED_PHY:
1054 /*
1055 * Configure DM as current source, DP as current sink
1056 * and enable battery charging comparators.
1057 */
1058 ulpi_write(phy, 0x8, 0x85);
1059 ulpi_write(phy, 0x2, 0x85);
1060 ulpi_write(phy, 0x1, 0x85);
1061 break;
1062 default:
1063 break;
1064 }
1065}
1066
1067static bool msm_chg_check_primary_det(struct msm_otg *motg)
1068{
1069 struct usb_phy *phy = &motg->phy;
1070 u32 chg_det;
1071 bool ret = false;
1072
1073 switch (motg->pdata->phy_type) {
1074 case CI_45NM_INTEGRATED_PHY:
1075 chg_det = ulpi_read(phy, 0x34);
1076 ret = chg_det & (1 << 4);
1077 break;
1078 case SNPS_28NM_INTEGRATED_PHY:
1079 chg_det = ulpi_read(phy, 0x87);
1080 ret = chg_det & 1;
1081 break;
1082 default:
1083 break;
1084 }
1085 return ret;
1086}
1087
1088static void msm_chg_enable_primary_det(struct msm_otg *motg)
1089{
1090 struct usb_phy *phy = &motg->phy;
1091 u32 chg_det;
1092
1093 switch (motg->pdata->phy_type) {
1094 case CI_45NM_INTEGRATED_PHY:
1095 chg_det = ulpi_read(phy, 0x34);
1096 /* enable chg detection */
1097 chg_det &= ~(1 << 0);
1098 ulpi_write(phy, chg_det, 0x34);
1099 break;
1100 case SNPS_28NM_INTEGRATED_PHY:
1101 /*
1102 * Configure DP as current source, DM as current sink
1103 * and enable battery charging comparators.
1104 */
1105 ulpi_write(phy, 0x2, 0x85);
1106 ulpi_write(phy, 0x1, 0x85);
1107 break;
1108 default:
1109 break;
1110 }
1111}
1112
1113static bool msm_chg_check_dcd(struct msm_otg *motg)
1114{
1115 struct usb_phy *phy = &motg->phy;
1116 u32 line_state;
1117 bool ret = false;
1118
1119 switch (motg->pdata->phy_type) {
1120 case CI_45NM_INTEGRATED_PHY:
1121 line_state = ulpi_read(phy, 0x15);
1122 ret = !(line_state & 1);
1123 break;
1124 case SNPS_28NM_INTEGRATED_PHY:
1125 line_state = ulpi_read(phy, 0x87);
1126 ret = line_state & 2;
1127 break;
1128 default:
1129 break;
1130 }
1131 return ret;
1132}
1133
1134static void msm_chg_disable_dcd(struct msm_otg *motg)
1135{
1136 struct usb_phy *phy = &motg->phy;
1137 u32 chg_det;
1138
1139 switch (motg->pdata->phy_type) {
1140 case CI_45NM_INTEGRATED_PHY:
1141 chg_det = ulpi_read(phy, 0x34);
1142 chg_det &= ~(1 << 5);
1143 ulpi_write(phy, chg_det, 0x34);
1144 break;
1145 case SNPS_28NM_INTEGRATED_PHY:
1146 ulpi_write(phy, 0x10, 0x86);
1147 break;
1148 default:
1149 break;
1150 }
1151}
1152
1153static void msm_chg_enable_dcd(struct msm_otg *motg)
1154{
1155 struct usb_phy *phy = &motg->phy;
1156 u32 chg_det;
1157
1158 switch (motg->pdata->phy_type) {
1159 case CI_45NM_INTEGRATED_PHY:
1160 chg_det = ulpi_read(phy, 0x34);
1161 /* Turn on D+ current source */
1162 chg_det |= (1 << 5);
1163 ulpi_write(phy, chg_det, 0x34);
1164 break;
1165 case SNPS_28NM_INTEGRATED_PHY:
1166 /* Data contact detection enable */
1167 ulpi_write(phy, 0x10, 0x85);
1168 break;
1169 default:
1170 break;
1171 }
1172}
1173
1174static void msm_chg_block_on(struct msm_otg *motg)
1175{
1176 struct usb_phy *phy = &motg->phy;
1177 u32 func_ctrl, chg_det;
1178
1179 /* put the controller in non-driving mode */
1180 func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
1181 func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
1182 func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
1183 ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
1184
1185 switch (motg->pdata->phy_type) {
1186 case CI_45NM_INTEGRATED_PHY:
1187 chg_det = ulpi_read(phy, 0x34);
1188 /* control chg block via ULPI */
1189 chg_det &= ~(1 << 3);
1190 ulpi_write(phy, chg_det, 0x34);
1191 /* Turn on chg detect block */
1192 chg_det &= ~(1 << 1);
1193 ulpi_write(phy, chg_det, 0x34);
1194 udelay(20);
1195 break;
1196 case SNPS_28NM_INTEGRATED_PHY:
1197 /* Clear charger detecting control bits */
1198 ulpi_write(phy, 0x3F, 0x86);
1199 /* Clear alt interrupt latch and enable bits */
1200 ulpi_write(phy, 0x1F, 0x92);
1201 ulpi_write(phy, 0x1F, 0x95);
1202 udelay(100);
1203 break;
1204 default:
1205 break;
1206 }
1207}
1208
1209static void msm_chg_block_off(struct msm_otg *motg)
1210{
1211 struct usb_phy *phy = &motg->phy;
1212 u32 func_ctrl, chg_det;
1213
1214 switch (motg->pdata->phy_type) {
1215 case CI_45NM_INTEGRATED_PHY:
1216 chg_det = ulpi_read(phy, 0x34);
1217 /* Turn off charger block */
1218 chg_det |= ~(1 << 1);
1219 ulpi_write(phy, chg_det, 0x34);
1220 break;
1221 case SNPS_28NM_INTEGRATED_PHY:
1222 /* Clear charger detecting control bits */
1223 ulpi_write(phy, 0x3F, 0x86);
1224 /* Clear alt interrupt latch and enable bits */
1225 ulpi_write(phy, 0x1F, 0x92);
1226 ulpi_write(phy, 0x1F, 0x95);
1227 break;
1228 default:
1229 break;
1230 }
1231
1232 /* put the controller in normal mode */
1233 func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
1234 func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
1235 func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
1236 ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
1237}
1238
1239#define MSM_CHG_DCD_POLL_TIME (100 * HZ/1000) /* 100 msec */
1240#define MSM_CHG_DCD_MAX_RETRIES 6 /* Tdcd_tmout = 6 * 100 msec */
1241#define MSM_CHG_PRIMARY_DET_TIME (40 * HZ/1000) /* TVDPSRC_ON */
1242#define MSM_CHG_SECONDARY_DET_TIME (40 * HZ/1000) /* TVDMSRC_ON */
1243static void msm_chg_detect_work(struct work_struct *w)
1244{
1245 struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work);
1246 struct usb_phy *phy = &motg->phy;
1247 bool is_dcd, tmout, vout;
1248 unsigned long delay;
1249
1250 dev_dbg(phy->dev, "chg detection work\n");
1251 switch (motg->chg_state) {
1252 case USB_CHG_STATE_UNDEFINED:
1253 pm_runtime_get_sync(phy->dev);
1254 msm_chg_block_on(motg);
1255 msm_chg_enable_dcd(motg);
1256 motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
1257 motg->dcd_retries = 0;
1258 delay = MSM_CHG_DCD_POLL_TIME;
1259 break;
1260 case USB_CHG_STATE_WAIT_FOR_DCD:
1261 is_dcd = msm_chg_check_dcd(motg);
1262 tmout = ++motg->dcd_retries == MSM_CHG_DCD_MAX_RETRIES;
1263 if (is_dcd || tmout) {
1264 msm_chg_disable_dcd(motg);
1265 msm_chg_enable_primary_det(motg);
1266 delay = MSM_CHG_PRIMARY_DET_TIME;
1267 motg->chg_state = USB_CHG_STATE_DCD_DONE;
1268 } else {
1269 delay = MSM_CHG_DCD_POLL_TIME;
1270 }
1271 break;
1272 case USB_CHG_STATE_DCD_DONE:
1273 vout = msm_chg_check_primary_det(motg);
1274 if (vout) {
1275 msm_chg_enable_secondary_det(motg);
1276 delay = MSM_CHG_SECONDARY_DET_TIME;
1277 motg->chg_state = USB_CHG_STATE_PRIMARY_DONE;
1278 } else {
1279 motg->chg_type = USB_SDP_CHARGER;
1280 motg->chg_state = USB_CHG_STATE_DETECTED;
1281 delay = 0;
1282 }
1283 break;
1284 case USB_CHG_STATE_PRIMARY_DONE:
1285 vout = msm_chg_check_secondary_det(motg);
1286 if (vout)
1287 motg->chg_type = USB_DCP_CHARGER;
1288 else
1289 motg->chg_type = USB_CDP_CHARGER;
1290 motg->chg_state = USB_CHG_STATE_SECONDARY_DONE;
1291 /* fall through */
1292 case USB_CHG_STATE_SECONDARY_DONE:
1293 motg->chg_state = USB_CHG_STATE_DETECTED;
1294 case USB_CHG_STATE_DETECTED:
1295 msm_chg_block_off(motg);
1296 dev_dbg(phy->dev, "charger = %d\n", motg->chg_type);
1297 schedule_work(&motg->sm_work);
1298 return;
1299 default:
1300 return;
1301 }
1302
1303 schedule_delayed_work(&motg->chg_work, delay);
1304}
1305
1306/*
1307 * We support OTG, Peripheral only and Host only configurations. In case
1308 * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
1309 * via Id pin status or user request (debugfs). Id/BSV interrupts are not
1310 * enabled when switch is controlled by user and default mode is supplied
1311 * by board file, which can be changed by userspace later.
1312 */
1313static void msm_otg_init_sm(struct msm_otg *motg)
1314{
1315 struct msm_otg_platform_data *pdata = motg->pdata;
1316 u32 otgsc = readl(USB_OTGSC);
1317
1318 switch (pdata->mode) {
1319 case USB_DR_MODE_OTG:
1320 if (pdata->otg_control == OTG_PHY_CONTROL) {
1321 if (otgsc & OTGSC_ID)
1322 set_bit(ID, &motg->inputs);
1323 else
1324 clear_bit(ID, &motg->inputs);
1325
1326 if (otgsc & OTGSC_BSV)
1327 set_bit(B_SESS_VLD, &motg->inputs);
1328 else
1329 clear_bit(B_SESS_VLD, &motg->inputs);
1330 } else if (pdata->otg_control == OTG_USER_CONTROL) {
1331 set_bit(ID, &motg->inputs);
1332 clear_bit(B_SESS_VLD, &motg->inputs);
1333 }
1334 break;
1335 case USB_DR_MODE_HOST:
1336 clear_bit(ID, &motg->inputs);
1337 break;
1338 case USB_DR_MODE_PERIPHERAL:
1339 set_bit(ID, &motg->inputs);
1340 if (otgsc & OTGSC_BSV)
1341 set_bit(B_SESS_VLD, &motg->inputs);
1342 else
1343 clear_bit(B_SESS_VLD, &motg->inputs);
1344 break;
1345 default:
1346 break;
1347 }
1348}
1349
1350static void msm_otg_sm_work(struct work_struct *w)
1351{
1352 struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
1353 struct usb_otg *otg = motg->phy.otg;
1354
1355 switch (otg->state) {
1356 case OTG_STATE_UNDEFINED:
1357 dev_dbg(otg->usb_phy->dev, "OTG_STATE_UNDEFINED state\n");
1358 msm_otg_reset(otg->usb_phy);
1359 msm_otg_init_sm(motg);
1360 otg->state = OTG_STATE_B_IDLE;
1361 /* FALL THROUGH */
1362 case OTG_STATE_B_IDLE:
1363 dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_IDLE state\n");
1364 if (!test_bit(ID, &motg->inputs) && otg->host) {
1365 /* disable BSV bit */
1366 writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
1367 msm_otg_start_host(otg->usb_phy, 1);
1368 otg->state = OTG_STATE_A_HOST;
1369 } else if (test_bit(B_SESS_VLD, &motg->inputs)) {
1370 switch (motg->chg_state) {
1371 case USB_CHG_STATE_UNDEFINED:
1372 msm_chg_detect_work(&motg->chg_work.work);
1373 break;
1374 case USB_CHG_STATE_DETECTED:
1375 switch (motg->chg_type) {
1376 case USB_DCP_CHARGER:
1377 msm_otg_notify_charger(motg,
1378 IDEV_CHG_MAX);
1379 break;
1380 case USB_CDP_CHARGER:
1381 msm_otg_notify_charger(motg,
1382 IDEV_CHG_MAX);
1383 msm_otg_start_peripheral(otg->usb_phy,
1384 1);
1385 otg->state
1386 = OTG_STATE_B_PERIPHERAL;
1387 break;
1388 case USB_SDP_CHARGER:
1389 msm_otg_notify_charger(motg, IUNIT);
1390 msm_otg_start_peripheral(otg->usb_phy,
1391 1);
1392 otg->state
1393 = OTG_STATE_B_PERIPHERAL;
1394 break;
1395 default:
1396 break;
1397 }
1398 break;
1399 default:
1400 break;
1401 }
1402 } else {
1403 /*
1404 * If charger detection work is pending, decrement
1405 * the pm usage counter to balance with the one that
1406 * is incremented in charger detection work.
1407 */
1408 if (cancel_delayed_work_sync(&motg->chg_work)) {
1409 pm_runtime_put_sync(otg->usb_phy->dev);
1410 msm_otg_reset(otg->usb_phy);
1411 }
1412 msm_otg_notify_charger(motg, 0);
1413 motg->chg_state = USB_CHG_STATE_UNDEFINED;
1414 motg->chg_type = USB_INVALID_CHARGER;
1415 }
1416
1417 if (otg->state == OTG_STATE_B_IDLE)
1418 pm_runtime_put_sync(otg->usb_phy->dev);
1419 break;
1420 case OTG_STATE_B_PERIPHERAL:
1421 dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_PERIPHERAL state\n");
1422 if (!test_bit(B_SESS_VLD, &motg->inputs) ||
1423 !test_bit(ID, &motg->inputs)) {
1424 msm_otg_notify_charger(motg, 0);
1425 msm_otg_start_peripheral(otg->usb_phy, 0);
1426 motg->chg_state = USB_CHG_STATE_UNDEFINED;
1427 motg->chg_type = USB_INVALID_CHARGER;
1428 otg->state = OTG_STATE_B_IDLE;
1429 msm_otg_reset(otg->usb_phy);
1430 schedule_work(w);
1431 }
1432 break;
1433 case OTG_STATE_A_HOST:
1434 dev_dbg(otg->usb_phy->dev, "OTG_STATE_A_HOST state\n");
1435 if (test_bit(ID, &motg->inputs)) {
1436 msm_otg_start_host(otg->usb_phy, 0);
1437 otg->state = OTG_STATE_B_IDLE;
1438 msm_otg_reset(otg->usb_phy);
1439 schedule_work(w);
1440 }
1441 break;
1442 default:
1443 break;
1444 }
1445}
1446
1447static irqreturn_t msm_otg_irq(int irq, void *data)
1448{
1449 struct msm_otg *motg = data;
1450 struct usb_phy *phy = &motg->phy;
1451 u32 otgsc = 0;
1452
1453 if (atomic_read(&motg->in_lpm)) {
1454 disable_irq_nosync(irq);
1455 motg->async_int = 1;
1456 pm_runtime_get(phy->dev);
1457 return IRQ_HANDLED;
1458 }
1459
1460 otgsc = readl(USB_OTGSC);
1461 if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
1462 return IRQ_NONE;
1463
1464 if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
1465 if (otgsc & OTGSC_ID)
1466 set_bit(ID, &motg->inputs);
1467 else
1468 clear_bit(ID, &motg->inputs);
1469 dev_dbg(phy->dev, "ID set/clear\n");
1470 pm_runtime_get_noresume(phy->dev);
1471 } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
1472 if (otgsc & OTGSC_BSV)
1473 set_bit(B_SESS_VLD, &motg->inputs);
1474 else
1475 clear_bit(B_SESS_VLD, &motg->inputs);
1476 dev_dbg(phy->dev, "BSV set/clear\n");
1477 pm_runtime_get_noresume(phy->dev);
1478 }
1479
1480 writel(otgsc, USB_OTGSC);
1481 schedule_work(&motg->sm_work);
1482 return IRQ_HANDLED;
1483}
1484
1485static int msm_otg_mode_show(struct seq_file *s, void *unused)
1486{
1487 struct msm_otg *motg = s->private;
1488 struct usb_otg *otg = motg->phy.otg;
1489
1490 switch (otg->state) {
1491 case OTG_STATE_A_HOST:
1492 seq_puts(s, "host\n");
1493 break;
1494 case OTG_STATE_B_PERIPHERAL:
1495 seq_puts(s, "peripheral\n");
1496 break;
1497 default:
1498 seq_puts(s, "none\n");
1499 break;
1500 }
1501
1502 return 0;
1503}
1504
1505static int msm_otg_mode_open(struct inode *inode, struct file *file)
1506{
1507 return single_open(file, msm_otg_mode_show, inode->i_private);
1508}
1509
1510static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
1511 size_t count, loff_t *ppos)
1512{
1513 struct seq_file *s = file->private_data;
1514 struct msm_otg *motg = s->private;
1515 char buf[16];
1516 struct usb_otg *otg = motg->phy.otg;
1517 int status = count;
1518 enum usb_dr_mode req_mode;
1519
1520 memset(buf, 0x00, sizeof(buf));
1521
1522 if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
1523 status = -EFAULT;
1524 goto out;
1525 }
1526
1527 if (!strncmp(buf, "host", 4)) {
1528 req_mode = USB_DR_MODE_HOST;
1529 } else if (!strncmp(buf, "peripheral", 10)) {
1530 req_mode = USB_DR_MODE_PERIPHERAL;
1531 } else if (!strncmp(buf, "none", 4)) {
1532 req_mode = USB_DR_MODE_UNKNOWN;
1533 } else {
1534 status = -EINVAL;
1535 goto out;
1536 }
1537
1538 switch (req_mode) {
1539 case USB_DR_MODE_UNKNOWN:
1540 switch (otg->state) {
1541 case OTG_STATE_A_HOST:
1542 case OTG_STATE_B_PERIPHERAL:
1543 set_bit(ID, &motg->inputs);
1544 clear_bit(B_SESS_VLD, &motg->inputs);
1545 break;
1546 default:
1547 goto out;
1548 }
1549 break;
1550 case USB_DR_MODE_PERIPHERAL:
1551 switch (otg->state) {
1552 case OTG_STATE_B_IDLE:
1553 case OTG_STATE_A_HOST:
1554 set_bit(ID, &motg->inputs);
1555 set_bit(B_SESS_VLD, &motg->inputs);
1556 break;
1557 default:
1558 goto out;
1559 }
1560 break;
1561 case USB_DR_MODE_HOST:
1562 switch (otg->state) {
1563 case OTG_STATE_B_IDLE:
1564 case OTG_STATE_B_PERIPHERAL:
1565 clear_bit(ID, &motg->inputs);
1566 break;
1567 default:
1568 goto out;
1569 }
1570 break;
1571 default:
1572 goto out;
1573 }
1574
1575 pm_runtime_get_sync(otg->usb_phy->dev);
1576 schedule_work(&motg->sm_work);
1577out:
1578 return status;
1579}
1580
1581static const struct file_operations msm_otg_mode_fops = {
1582 .open = msm_otg_mode_open,
1583 .read = seq_read,
1584 .write = msm_otg_mode_write,
1585 .llseek = seq_lseek,
1586 .release = single_release,
1587};
1588
1589static struct dentry *msm_otg_dbg_root;
1590static struct dentry *msm_otg_dbg_mode;
1591
1592static int msm_otg_debugfs_init(struct msm_otg *motg)
1593{
1594 msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
1595
1596 if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
1597 return -ENODEV;
1598
1599 msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
1600 msm_otg_dbg_root, motg, &msm_otg_mode_fops);
1601 if (!msm_otg_dbg_mode) {
1602 debugfs_remove(msm_otg_dbg_root);
1603 msm_otg_dbg_root = NULL;
1604 return -ENODEV;
1605 }
1606
1607 return 0;
1608}
1609
1610static void msm_otg_debugfs_cleanup(void)
1611{
1612 debugfs_remove(msm_otg_dbg_mode);
1613 debugfs_remove(msm_otg_dbg_root);
1614}
1615
1616static const struct of_device_id msm_otg_dt_match[] = {
1617 {
1618 .compatible = "qcom,usb-otg-ci",
1619 .data = (void *) CI_45NM_INTEGRATED_PHY
1620 },
1621 {
1622 .compatible = "qcom,usb-otg-snps",
1623 .data = (void *) SNPS_28NM_INTEGRATED_PHY
1624 },
1625 { }
1626};
1627MODULE_DEVICE_TABLE(of, msm_otg_dt_match);
1628
1629static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event,
1630 void *ptr)
1631{
1632 struct msm_usb_cable *vbus = container_of(nb, struct msm_usb_cable, nb);
1633 struct msm_otg *motg = container_of(vbus, struct msm_otg, vbus);
1634
1635 if (event)
1636 set_bit(B_SESS_VLD, &motg->inputs);
1637 else
1638 clear_bit(B_SESS_VLD, &motg->inputs);
1639
1640 if (test_bit(B_SESS_VLD, &motg->inputs)) {
1641 /* Switch D+/D- lines to Device connector */
1642 gpiod_set_value_cansleep(motg->switch_gpio, 0);
1643 } else {
1644 /* Switch D+/D- lines to Hub */
1645 gpiod_set_value_cansleep(motg->switch_gpio, 1);
1646 }
1647
1648 schedule_work(&motg->sm_work);
1649
1650 return NOTIFY_DONE;
1651}
1652
1653static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event,
1654 void *ptr)
1655{
1656 struct msm_usb_cable *id = container_of(nb, struct msm_usb_cable, nb);
1657 struct msm_otg *motg = container_of(id, struct msm_otg, id);
1658
1659 if (event)
1660 clear_bit(ID, &motg->inputs);
1661 else
1662 set_bit(ID, &motg->inputs);
1663
1664 schedule_work(&motg->sm_work);
1665
1666 return NOTIFY_DONE;
1667}
1668
1669static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
1670{
1671 struct msm_otg_platform_data *pdata;
1672 struct extcon_dev *ext_id, *ext_vbus;
1673 struct device_node *node = pdev->dev.of_node;
1674 struct property *prop;
1675 int len, ret, words;
1676 u32 val, tmp[3];
1677
1678 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
1679 if (!pdata)
1680 return -ENOMEM;
1681
1682 motg->pdata = pdata;
1683
1684 pdata->phy_type = (enum msm_usb_phy_type)of_device_get_match_data(&pdev->dev);
1685 if (!pdata->phy_type)
1686 return 1;
1687
1688 motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
1689 if (IS_ERR(motg->link_rst))
1690 return PTR_ERR(motg->link_rst);
1691
1692 motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy");
1693 if (IS_ERR(motg->phy_rst))
1694 motg->phy_rst = NULL;
1695
1696 pdata->mode = usb_get_dr_mode(&pdev->dev);
1697 if (pdata->mode == USB_DR_MODE_UNKNOWN)
1698 pdata->mode = USB_DR_MODE_OTG;
1699
1700 pdata->otg_control = OTG_PHY_CONTROL;
1701 if (!of_property_read_u32(node, "qcom,otg-control", &val))
1702 if (val == OTG_PMIC_CONTROL)
1703 pdata->otg_control = val;
1704
1705 if (!of_property_read_u32(node, "qcom,phy-num", &val) && val < 2)
1706 motg->phy_number = val;
1707
1708 motg->vdd_levels[VDD_LEVEL_NONE] = USB_PHY_SUSP_DIG_VOL;
1709 motg->vdd_levels[VDD_LEVEL_MIN] = USB_PHY_VDD_DIG_VOL_MIN;
1710 motg->vdd_levels[VDD_LEVEL_MAX] = USB_PHY_VDD_DIG_VOL_MAX;
1711
1712 if (of_get_property(node, "qcom,vdd-levels", &len) &&
1713 len == sizeof(tmp)) {
1714 of_property_read_u32_array(node, "qcom,vdd-levels",
1715 tmp, len / sizeof(*tmp));
1716 motg->vdd_levels[VDD_LEVEL_NONE] = tmp[VDD_LEVEL_NONE];
1717 motg->vdd_levels[VDD_LEVEL_MIN] = tmp[VDD_LEVEL_MIN];
1718 motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX];
1719 }
1720
1721 motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup");
1722
1723 motg->switch_gpio = devm_gpiod_get_optional(&pdev->dev, "switch",
1724 GPIOD_OUT_LOW);
1725 if (IS_ERR(motg->switch_gpio))
1726 return PTR_ERR(motg->switch_gpio);
1727
1728 ext_id = ERR_PTR(-ENODEV);
1729 ext_vbus = ERR_PTR(-ENODEV);
1730 if (of_property_read_bool(node, "extcon")) {
1731
1732 /* Each one of them is not mandatory */
1733 ext_vbus = extcon_get_edev_by_phandle(&pdev->dev, 0);
1734 if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
1735 return PTR_ERR(ext_vbus);
1736
1737 ext_id = extcon_get_edev_by_phandle(&pdev->dev, 1);
1738 if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
1739 return PTR_ERR(ext_id);
1740 }
1741
1742 if (!IS_ERR(ext_vbus)) {
1743 motg->vbus.extcon = ext_vbus;
1744 motg->vbus.nb.notifier_call = msm_otg_vbus_notifier;
1745 ret = extcon_register_notifier(ext_vbus, EXTCON_USB,
1746 &motg->vbus.nb);
1747 if (ret < 0) {
1748 dev_err(&pdev->dev, "register VBUS notifier failed\n");
1749 return ret;
1750 }
1751
1752 ret = extcon_get_cable_state_(ext_vbus, EXTCON_USB);
1753 if (ret)
1754 set_bit(B_SESS_VLD, &motg->inputs);
1755 else
1756 clear_bit(B_SESS_VLD, &motg->inputs);
1757 }
1758
1759 if (!IS_ERR(ext_id)) {
1760 motg->id.extcon = ext_id;
1761 motg->id.nb.notifier_call = msm_otg_id_notifier;
1762 ret = extcon_register_notifier(ext_id, EXTCON_USB_HOST,
1763 &motg->id.nb);
1764 if (ret < 0) {
1765 dev_err(&pdev->dev, "register ID notifier failed\n");
1766 extcon_unregister_notifier(motg->vbus.extcon,
1767 EXTCON_USB, &motg->vbus.nb);
1768 return ret;
1769 }
1770
1771 ret = extcon_get_cable_state_(ext_id, EXTCON_USB_HOST);
1772 if (ret)
1773 clear_bit(ID, &motg->inputs);
1774 else
1775 set_bit(ID, &motg->inputs);
1776 }
1777
1778 prop = of_find_property(node, "qcom,phy-init-sequence", &len);
1779 if (!prop || !len)
1780 return 0;
1781
1782 words = len / sizeof(u32);
1783
1784 if (words >= ULPI_EXT_VENDOR_SPECIFIC) {
1785 dev_warn(&pdev->dev, "Too big PHY init sequence %d\n", words);
1786 return 0;
1787 }
1788
1789 pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
1790 if (!pdata->phy_init_seq)
1791 return 0;
1792
1793 ret = of_property_read_u32_array(node, "qcom,phy-init-sequence",
1794 pdata->phy_init_seq, words);
1795 if (!ret)
1796 pdata->phy_init_sz = words;
1797
1798 return 0;
1799}
1800
1801static int msm_otg_reboot_notify(struct notifier_block *this,
1802 unsigned long code, void *unused)
1803{
1804 struct msm_otg *motg = container_of(this, struct msm_otg, reboot);
1805
1806 /*
1807 * Ensure that D+/D- lines are routed to uB connector, so
1808 * we could load bootloader/kernel at next reboot
1809 */
1810 gpiod_set_value_cansleep(motg->switch_gpio, 0);
1811 return NOTIFY_DONE;
1812}
1813
1814static int msm_otg_probe(struct platform_device *pdev)
1815{
1816 struct regulator_bulk_data regs[3];
1817 int ret = 0;
1818 struct device_node *np = pdev->dev.of_node;
1819 struct msm_otg_platform_data *pdata;
1820 struct resource *res;
1821 struct msm_otg *motg;
1822 struct usb_phy *phy;
1823 void __iomem *phy_select;
1824
1825 motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL);
1826 if (!motg)
1827 return -ENOMEM;
1828
1829 motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
1830 GFP_KERNEL);
1831 if (!motg->phy.otg)
1832 return -ENOMEM;
1833
1834 phy = &motg->phy;
1835 phy->dev = &pdev->dev;
1836
1837 motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
1838 if (IS_ERR(motg->clk)) {
1839 dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
1840 return PTR_ERR(motg->clk);
1841 }
1842
1843 /*
1844 * If USB Core is running its protocol engine based on CORE CLK,
1845 * CORE CLK must be running at >55Mhz for correct HSUSB
1846 * operation and USB core cannot tolerate frequency changes on
1847 * CORE CLK.
1848 */
1849 motg->pclk = devm_clk_get(&pdev->dev, np ? "iface" : "usb_hs_pclk");
1850 if (IS_ERR(motg->pclk)) {
1851 dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
1852 return PTR_ERR(motg->pclk);
1853 }
1854
1855 /*
1856 * USB core clock is not present on all MSM chips. This
1857 * clock is introduced to remove the dependency on AXI
1858 * bus frequency.
1859 */
1860 motg->core_clk = devm_clk_get(&pdev->dev,
1861 np ? "alt_core" : "usb_hs_core_clk");
1862
1863 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1864 if (!res)
1865 return -EINVAL;
1866 motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
1867 if (!motg->regs)
1868 return -ENOMEM;
1869
1870 pdata = dev_get_platdata(&pdev->dev);
1871 if (!pdata) {
1872 if (!np)
1873 return -ENXIO;
1874 ret = msm_otg_read_dt(pdev, motg);
1875 if (ret)
1876 return ret;
1877 }
1878
1879 /*
1880 * NOTE: The PHYs can be multiplexed between the chipidea controller
1881 * and the dwc3 controller, using a single bit. It is important that
1882 * the dwc3 driver does not set this bit in an incompatible way.
1883 */
1884 if (motg->phy_number) {
1885 phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
1886 if (!phy_select) {
1887 ret = -ENOMEM;
1888 goto unregister_extcon;
1889 }
1890 /* Enable second PHY with the OTG port */
1891 writel(0x1, phy_select);
1892 }
1893
1894 dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
1895
1896 motg->irq = platform_get_irq(pdev, 0);
1897 if (motg->irq < 0) {
1898 dev_err(&pdev->dev, "platform_get_irq failed\n");
1899 ret = motg->irq;
1900 goto unregister_extcon;
1901 }
1902
1903 regs[0].supply = "vddcx";
1904 regs[1].supply = "v3p3";
1905 regs[2].supply = "v1p8";
1906
1907 ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs);
1908 if (ret)
1909 goto unregister_extcon;
1910
1911 motg->vddcx = regs[0].consumer;
1912 motg->v3p3 = regs[1].consumer;
1913 motg->v1p8 = regs[2].consumer;
1914
1915 clk_set_rate(motg->clk, 60000000);
1916
1917 clk_prepare_enable(motg->clk);
1918 clk_prepare_enable(motg->pclk);
1919
1920 if (!IS_ERR(motg->core_clk))
1921 clk_prepare_enable(motg->core_clk);
1922
1923 ret = msm_hsusb_init_vddcx(motg, 1);
1924 if (ret) {
1925 dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
1926 goto disable_clks;
1927 }
1928
1929 ret = msm_hsusb_ldo_init(motg, 1);
1930 if (ret) {
1931 dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
1932 goto disable_vddcx;
1933 }
1934 ret = msm_hsusb_ldo_set_mode(motg, 1);
1935 if (ret) {
1936 dev_err(&pdev->dev, "hsusb vreg enable failed\n");
1937 goto disable_ldo;
1938 }
1939
1940 writel(0, USB_USBINTR);
1941 writel(0, USB_OTGSC);
1942
1943 INIT_WORK(&motg->sm_work, msm_otg_sm_work);
1944 INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work);
1945 ret = devm_request_irq(&pdev->dev, motg->irq, msm_otg_irq, IRQF_SHARED,
1946 "msm_otg", motg);
1947 if (ret) {
1948 dev_err(&pdev->dev, "request irq failed\n");
1949 goto disable_ldo;
1950 }
1951
1952 phy->init = msm_phy_init;
1953 phy->set_power = msm_otg_set_power;
1954 phy->notify_disconnect = msm_phy_notify_disconnect;
1955 phy->type = USB_PHY_TYPE_USB2;
1956
1957 phy->io_ops = &msm_otg_io_ops;
1958
1959 phy->otg->usb_phy = &motg->phy;
1960 phy->otg->set_host = msm_otg_set_host;
1961 phy->otg->set_peripheral = msm_otg_set_peripheral;
1962
1963 msm_usb_reset(phy);
1964
1965 ret = usb_add_phy_dev(&motg->phy);
1966 if (ret) {
1967 dev_err(&pdev->dev, "usb_add_phy failed\n");
1968 goto disable_ldo;
1969 }
1970
1971 platform_set_drvdata(pdev, motg);
1972 device_init_wakeup(&pdev->dev, 1);
1973
1974 if (motg->pdata->mode == USB_DR_MODE_OTG &&
1975 motg->pdata->otg_control == OTG_USER_CONTROL) {
1976 ret = msm_otg_debugfs_init(motg);
1977 if (ret)
1978 dev_dbg(&pdev->dev, "Can not create mode change file\n");
1979 }
1980
1981 if (test_bit(B_SESS_VLD, &motg->inputs)) {
1982 /* Switch D+/D- lines to Device connector */
1983 gpiod_set_value_cansleep(motg->switch_gpio, 0);
1984 } else {
1985 /* Switch D+/D- lines to Hub */
1986 gpiod_set_value_cansleep(motg->switch_gpio, 1);
1987 }
1988
1989 motg->reboot.notifier_call = msm_otg_reboot_notify;
1990 register_reboot_notifier(&motg->reboot);
1991
1992 pm_runtime_set_active(&pdev->dev);
1993 pm_runtime_enable(&pdev->dev);
1994
1995 return 0;
1996
1997disable_ldo:
1998 msm_hsusb_ldo_init(motg, 0);
1999disable_vddcx:
2000 msm_hsusb_init_vddcx(motg, 0);
2001disable_clks:
2002 clk_disable_unprepare(motg->pclk);
2003 clk_disable_unprepare(motg->clk);
2004 if (!IS_ERR(motg->core_clk))
2005 clk_disable_unprepare(motg->core_clk);
2006unregister_extcon:
2007 extcon_unregister_notifier(motg->id.extcon,
2008 EXTCON_USB_HOST, &motg->id.nb);
2009 extcon_unregister_notifier(motg->vbus.extcon,
2010 EXTCON_USB, &motg->vbus.nb);
2011
2012 return ret;
2013}
2014
2015static int msm_otg_remove(struct platform_device *pdev)
2016{
2017 struct msm_otg *motg = platform_get_drvdata(pdev);
2018 struct usb_phy *phy = &motg->phy;
2019 int cnt = 0;
2020
2021 if (phy->otg->host || phy->otg->gadget)
2022 return -EBUSY;
2023
2024 unregister_reboot_notifier(&motg->reboot);
2025
2026 /*
2027 * Ensure that D+/D- lines are routed to uB connector, so
2028 * we could load bootloader/kernel at next reboot
2029 */
2030 gpiod_set_value_cansleep(motg->switch_gpio, 0);
2031
2032 extcon_unregister_notifier(motg->id.extcon, EXTCON_USB_HOST, &motg->id.nb);
2033 extcon_unregister_notifier(motg->vbus.extcon, EXTCON_USB, &motg->vbus.nb);
2034
2035 msm_otg_debugfs_cleanup();
2036 cancel_delayed_work_sync(&motg->chg_work);
2037 cancel_work_sync(&motg->sm_work);
2038
2039 pm_runtime_resume(&pdev->dev);
2040
2041 device_init_wakeup(&pdev->dev, 0);
2042 pm_runtime_disable(&pdev->dev);
2043
2044 usb_remove_phy(phy);
2045 disable_irq(motg->irq);
2046
2047 /*
2048 * Put PHY in low power mode.
2049 */
2050 ulpi_read(phy, 0x14);
2051 ulpi_write(phy, 0x08, 0x09);
2052
2053 writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
2054 while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
2055 if (readl(USB_PORTSC) & PORTSC_PHCD)
2056 break;
2057 udelay(1);
2058 cnt++;
2059 }
2060 if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
2061 dev_err(phy->dev, "Unable to suspend PHY\n");
2062
2063 clk_disable_unprepare(motg->pclk);
2064 clk_disable_unprepare(motg->clk);
2065 if (!IS_ERR(motg->core_clk))
2066 clk_disable_unprepare(motg->core_clk);
2067 msm_hsusb_ldo_init(motg, 0);
2068
2069 pm_runtime_set_suspended(&pdev->dev);
2070
2071 return 0;
2072}
2073
2074#ifdef CONFIG_PM
2075static int msm_otg_runtime_idle(struct device *dev)
2076{
2077 struct msm_otg *motg = dev_get_drvdata(dev);
2078 struct usb_otg *otg = motg->phy.otg;
2079
2080 dev_dbg(dev, "OTG runtime idle\n");
2081
2082 /*
2083 * It is observed some times that a spurious interrupt
2084 * comes when PHY is put into LPM immediately after PHY reset.
2085 * This 1 sec delay also prevents entering into LPM immediately
2086 * after asynchronous interrupt.
2087 */
2088 if (otg->state != OTG_STATE_UNDEFINED)
2089 pm_schedule_suspend(dev, 1000);
2090
2091 return -EAGAIN;
2092}
2093
2094static int msm_otg_runtime_suspend(struct device *dev)
2095{
2096 struct msm_otg *motg = dev_get_drvdata(dev);
2097
2098 dev_dbg(dev, "OTG runtime suspend\n");
2099 return msm_otg_suspend(motg);
2100}
2101
2102static int msm_otg_runtime_resume(struct device *dev)
2103{
2104 struct msm_otg *motg = dev_get_drvdata(dev);
2105
2106 dev_dbg(dev, "OTG runtime resume\n");
2107 return msm_otg_resume(motg);
2108}
2109#endif
2110
2111#ifdef CONFIG_PM_SLEEP
2112static int msm_otg_pm_suspend(struct device *dev)
2113{
2114 struct msm_otg *motg = dev_get_drvdata(dev);
2115
2116 dev_dbg(dev, "OTG PM suspend\n");
2117 return msm_otg_suspend(motg);
2118}
2119
2120static int msm_otg_pm_resume(struct device *dev)
2121{
2122 struct msm_otg *motg = dev_get_drvdata(dev);
2123 int ret;
2124
2125 dev_dbg(dev, "OTG PM resume\n");
2126
2127 ret = msm_otg_resume(motg);
2128 if (ret)
2129 return ret;
2130
2131 /*
2132 * Runtime PM Documentation recommends bringing the
2133 * device to full powered state upon resume.
2134 */
2135 pm_runtime_disable(dev);
2136 pm_runtime_set_active(dev);
2137 pm_runtime_enable(dev);
2138
2139 return 0;
2140}
2141#endif
2142
2143static const struct dev_pm_ops msm_otg_dev_pm_ops = {
2144 SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
2145 SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
2146 msm_otg_runtime_idle)
2147};
2148
2149static struct platform_driver msm_otg_driver = {
2150 .probe = msm_otg_probe,
2151 .remove = msm_otg_remove,
2152 .driver = {
2153 .name = DRIVER_NAME,
2154 .pm = &msm_otg_dev_pm_ops,
2155 .of_match_table = msm_otg_dt_match,
2156 },
2157};
2158
2159module_platform_driver(msm_otg_driver);
2160
2161MODULE_LICENSE("GPL v2");
2162MODULE_DESCRIPTION("MSM USB transceiver driver");