Linux Audio

Check our new training course

Loading...
v3.15
  1/*
  2 * linux/arch/arm/mach-pxa/palmtc.c
  3 *
  4 * Support for the Palm Tungsten|C
  5 *
  6 * Author:	Marek Vasut <marek.vasut@gmail.com>
  7 *
  8 * Based on work of:
  9 *		Petr Blaha <p3t3@centrum.cz>
 10 *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
 11 *
 12 * This program is free software; you can redistribute it and/or modify
 13 * it under the terms of the GNU General Public License version 2 as
 14 * published by the Free Software Foundation.
 15 */
 16
 17#include <linux/platform_device.h>
 18#include <linux/delay.h>
 19#include <linux/irq.h>
 20#include <linux/input.h>
 
 21#include <linux/pwm_backlight.h>
 22#include <linux/gpio.h>
 23#include <linux/input/matrix_keypad.h>
 24#include <linux/ucb1400.h>
 25#include <linux/power_supply.h>
 26#include <linux/gpio_keys.h>
 27#include <linux/mtd/physmap.h>
 28#include <linux/usb/gpio_vbus.h>
 29
 30#include <asm/mach-types.h>
 31#include <asm/mach/arch.h>
 32#include <asm/mach/map.h>
 33
 34#include <mach/pxa25x.h>
 35#include <mach/audio.h>
 36#include <mach/palmtc.h>
 37#include <linux/platform_data/mmc-pxamci.h>
 38#include <linux/platform_data/video-pxafb.h>
 39#include <linux/platform_data/irda-pxaficp.h>
 40#include <mach/udc.h>
 41
 42#include "generic.h"
 43#include "devices.h"
 44
 45/******************************************************************************
 46 * Pin configuration
 47 ******************************************************************************/
 48static unsigned long palmtc_pin_config[] __initdata = {
 49	/* MMC */
 50	GPIO6_MMC_CLK,
 51	GPIO8_MMC_CS0,
 52	GPIO12_GPIO,	/* detect */
 53	GPIO32_GPIO,	/* power */
 54	GPIO54_GPIO,	/* r/o switch */
 55
 56	/* PCMCIA */
 57	GPIO52_nPCE_1,
 58	GPIO53_nPCE_2,
 59	GPIO50_nPIOR,
 60	GPIO51_nPIOW,
 61	GPIO49_nPWE,
 62	GPIO48_nPOE,
 63	GPIO52_nPCE_1,
 64	GPIO53_nPCE_2,
 65	GPIO57_nIOIS16,
 66	GPIO56_nPWAIT,
 67
 68	/* AC97 */
 69	GPIO28_AC97_BITCLK,
 70	GPIO29_AC97_SDATA_IN_0,
 71	GPIO30_AC97_SDATA_OUT,
 72	GPIO31_AC97_SYNC,
 73
 74	/* IrDA */
 75	GPIO45_GPIO,	/* ir disable */
 76	GPIO46_FICP_RXD,
 77	GPIO47_FICP_TXD,
 78
 79	/* PWM */
 80	GPIO17_PWM1_OUT,
 81
 82	/* USB */
 83	GPIO4_GPIO,	/* detect */
 84	GPIO36_GPIO,	/* pullup */
 85
 86	/* LCD */
 87	GPIOxx_LCD_TFT_16BPP,
 88
 89	/* MATRIX KEYPAD */
 90	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
 91	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
 92	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
 93	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
 94	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
 95	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
 96	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
 97	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
 98	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
 99	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
100	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
101	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
102	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
103	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
104	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
105	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
106
107	/* PXA GPIO KEYS */
108	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
109
110	/* MISC */
111	GPIO1_RST,	/* reset */
112	GPIO2_GPIO,	/* earphone detect */
113	GPIO16_GPIO,	/* backlight switch */
114};
115
116/******************************************************************************
117 * SD/MMC card controller
118 ******************************************************************************/
119#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
120static struct pxamci_platform_data palmtc_mci_platform_data = {
121	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
122	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
123	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
124	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
125	.detect_delay_ms	= 200,
126};
127
128static void __init palmtc_mmc_init(void)
129{
130	pxa_set_mci_info(&palmtc_mci_platform_data);
131}
132#else
133static inline void palmtc_mmc_init(void) {}
134#endif
135
136/******************************************************************************
137 * GPIO keys
138 ******************************************************************************/
139#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
140static struct gpio_keys_button palmtc_pxa_buttons[] = {
141	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
142};
143
144static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
145	.buttons	= palmtc_pxa_buttons,
146	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
147};
148
149static struct platform_device palmtc_pxa_keys = {
150	.name	= "gpio-keys",
151	.id	= -1,
152	.dev	= {
153		.platform_data = &palmtc_pxa_keys_data,
154	},
155};
156
157static void __init palmtc_keys_init(void)
158{
159	platform_device_register(&palmtc_pxa_keys);
160}
161#else
162static inline void palmtc_keys_init(void) {}
163#endif
164
165/******************************************************************************
166 * Backlight
167 ******************************************************************************/
168#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
 
 
 
 
 
169static struct platform_pwm_backlight_data palmtc_backlight_data = {
170	.pwm_id		= 1,
171	.max_brightness	= PALMTC_MAX_INTENSITY,
172	.dft_brightness	= PALMTC_MAX_INTENSITY,
173	.pwm_period_ns	= PALMTC_PERIOD_NS,
174	.enable_gpio	= GPIO_NR_PALMTC_BL_POWER,
175};
176
177static struct platform_device palmtc_backlight = {
178	.name	= "pwm-backlight",
179	.dev	= {
180		.parent		= &pxa25x_device_pwm1.dev,
181		.platform_data	= &palmtc_backlight_data,
182	},
183};
184
185static void __init palmtc_pwm_init(void)
186{
 
187	platform_device_register(&palmtc_backlight);
188}
189#else
190static inline void palmtc_pwm_init(void) {}
191#endif
192
193/******************************************************************************
194 * IrDA
195 ******************************************************************************/
196#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
197static struct pxaficp_platform_data palmtc_ficp_platform_data = {
198	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
199	.transceiver_cap	= IR_SIRMODE | IR_OFF,
200};
201
202static void __init palmtc_irda_init(void)
203{
204	pxa_set_ficp_info(&palmtc_ficp_platform_data);
205}
206#else
207static inline void palmtc_irda_init(void) {}
208#endif
209
210/******************************************************************************
211 * Keyboard
212 ******************************************************************************/
213#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
214static const uint32_t palmtc_matrix_keys[] = {
215	KEY(0, 0, KEY_F1),
216	KEY(0, 1, KEY_X),
217	KEY(0, 2, KEY_POWER),
218	KEY(0, 3, KEY_TAB),
219	KEY(0, 4, KEY_A),
220	KEY(0, 5, KEY_Q),
221	KEY(0, 6, KEY_LEFTSHIFT),
222	KEY(0, 7, KEY_Z),
223	KEY(0, 8, KEY_S),
224	KEY(0, 9, KEY_W),
225	KEY(0, 10, KEY_E),
226	KEY(0, 11, KEY_UP),
227
228	KEY(1, 0, KEY_F2),
229	KEY(1, 1, KEY_DOWN),
230	KEY(1, 3, KEY_D),
231	KEY(1, 4, KEY_C),
232	KEY(1, 5, KEY_F),
233	KEY(1, 6, KEY_R),
234	KEY(1, 7, KEY_SPACE),
235	KEY(1, 8, KEY_V),
236	KEY(1, 9, KEY_G),
237	KEY(1, 10, KEY_T),
238	KEY(1, 11, KEY_LEFT),
239
240	KEY(2, 0, KEY_F3),
241	KEY(2, 1, KEY_LEFTCTRL),
242	KEY(2, 3, KEY_H),
243	KEY(2, 4, KEY_Y),
244	KEY(2, 5, KEY_N),
245	KEY(2, 6, KEY_J),
246	KEY(2, 7, KEY_U),
247	KEY(2, 8, KEY_M),
248	KEY(2, 9, KEY_K),
249	KEY(2, 10, KEY_I),
250	KEY(2, 11, KEY_RIGHT),
251
252	KEY(3, 0, KEY_F4),
253	KEY(3, 1, KEY_ENTER),
254	KEY(3, 3, KEY_DOT),
255	KEY(3, 4, KEY_L),
256	KEY(3, 5, KEY_O),
257	KEY(3, 6, KEY_LEFTALT),
258	KEY(3, 7, KEY_ENTER),
259	KEY(3, 8, KEY_BACKSPACE),
260	KEY(3, 9, KEY_P),
261	KEY(3, 10, KEY_B),
262	KEY(3, 11, KEY_FN),
263};
264
265const struct matrix_keymap_data palmtc_keymap_data = {
266	.keymap			= palmtc_matrix_keys,
267	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
268};
269
270static const unsigned int palmtc_keypad_row_gpios[] = {
271	0, 9, 10, 11
272};
273
274static const unsigned int palmtc_keypad_col_gpios[] = {
275	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
276};
277
278static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
279	.keymap_data	= &palmtc_keymap_data,
280	.row_gpios	= palmtc_keypad_row_gpios,
281	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
282	.col_gpios	= palmtc_keypad_col_gpios,
283	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
284	.active_low	= 1,
285
286	.debounce_ms		= 20,
287	.col_scan_delay_us	= 5,
288};
289
290static struct platform_device palmtc_keyboard = {
291	.name	= "matrix-keypad",
292	.id	= -1,
293	.dev	= {
294		.platform_data = &palmtc_keypad_platform_data,
295	},
296};
297static void __init palmtc_mkp_init(void)
298{
299	platform_device_register(&palmtc_keyboard);
300}
301#else
302static inline void palmtc_mkp_init(void) {}
303#endif
304
305/******************************************************************************
306 * UDC
307 ******************************************************************************/
308#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
309static struct gpio_vbus_mach_info palmtc_udc_info = {
310	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
311	.gpio_vbus_inverted	= 1,
312	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
313};
314
315static struct platform_device palmtc_gpio_vbus = {
316	.name	= "gpio-vbus",
317	.id	= -1,
318	.dev	= {
319		.platform_data	= &palmtc_udc_info,
320	},
321};
322
323static void __init palmtc_udc_init(void)
324{
325	platform_device_register(&palmtc_gpio_vbus);
326};
327#else
328static inline void palmtc_udc_init(void) {}
329#endif
330
331/******************************************************************************
332 * Touchscreen / Battery / GPIO-extender
333 ******************************************************************************/
334#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
335	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
336static struct platform_device palmtc_ucb1400_device = {
337	.name	= "ucb1400_core",
338	.id	= -1,
339};
340
341static void __init palmtc_ts_init(void)
342{
343	pxa_set_ac97_info(NULL);
344	platform_device_register(&palmtc_ucb1400_device);
345}
346#else
347static inline void palmtc_ts_init(void) {}
348#endif
349
350/******************************************************************************
351 * LEDs
352 ******************************************************************************/
353#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
354struct gpio_led palmtc_gpio_leds[] = {
355{
356	.name			= "palmtc:green:user",
357	.default_trigger	= "none",
358	.gpio			= GPIO_NR_PALMTC_LED_POWER,
359	.active_low		= 1,
360}, {
361	.name			= "palmtc:vibra:vibra",
362	.default_trigger	= "none",
363	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
364	.active_low		= 1,
365}
366
367};
368
369static struct gpio_led_platform_data palmtc_gpio_led_info = {
370	.leds		= palmtc_gpio_leds,
371	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
372};
373
374static struct platform_device palmtc_leds = {
375	.name	= "leds-gpio",
376	.id	= -1,
377	.dev	= {
378		.platform_data	= &palmtc_gpio_led_info,
379	}
380};
381
382static void __init palmtc_leds_init(void)
383{
384	platform_device_register(&palmtc_leds);
385}
386#else
387static inline void palmtc_leds_init(void) {}
388#endif
389
390/******************************************************************************
391 * NOR Flash
392 ******************************************************************************/
393#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
394static struct resource palmtc_flash_resource = {
395	.start	= PXA_CS0_PHYS,
396	.end	= PXA_CS0_PHYS + SZ_16M - 1,
397	.flags	= IORESOURCE_MEM,
398};
399
400static struct mtd_partition palmtc_flash_parts[] = {
401	{
402		.name	= "U-Boot Bootloader",
403		.offset	= 0x0,
404		.size	= 0x40000,
405	},
406	{
407		.name	= "Linux Kernel",
408		.offset	= 0x40000,
409		.size	= 0x2c0000,
410	},
411	{
412		.name	= "Filesystem",
413		.offset	= 0x300000,
414		.size	= 0xcc0000,
415	},
416	{
417		.name	= "U-Boot Environment",
418		.offset	= 0xfc0000,
419		.size	= MTDPART_SIZ_FULL,
420	},
421};
422
423static struct physmap_flash_data palmtc_flash_data = {
424	.width		= 4,
425	.parts		= palmtc_flash_parts,
426	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
427};
428
429static struct platform_device palmtc_flash = {
430	.name		= "physmap-flash",
431	.id		= -1,
432	.resource	= &palmtc_flash_resource,
433	.num_resources	= 1,
434	.dev = {
435		.platform_data	= &palmtc_flash_data,
436	},
437};
438
439static void __init palmtc_nor_init(void)
440{
441	platform_device_register(&palmtc_flash);
442}
443#else
444static inline void palmtc_nor_init(void) {}
445#endif
446
447/******************************************************************************
448 * Framebuffer
449 ******************************************************************************/
450#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
451static struct pxafb_mode_info palmtc_lcd_modes[] = {
452	{
453		.pixclock	= 115384,
454		.xres		= 320,
455		.yres		= 320,
456		.bpp		= 16,
457
458		.left_margin	= 27,
459		.right_margin	= 7,
460		.upper_margin	= 7,
461		.lower_margin	= 8,
462
463		.hsync_len	= 6,
464		.vsync_len	= 1,
465	},
466};
467
468static struct pxafb_mach_info palmtc_lcd_screen = {
469	.modes			= palmtc_lcd_modes,
470	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
471	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
472};
473
474static void __init palmtc_lcd_init(void)
475{
476	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
477}
478#else
479static inline void palmtc_lcd_init(void) {}
480#endif
481
482/******************************************************************************
483 * Machine init
484 ******************************************************************************/
485static void __init palmtc_init(void)
486{
487	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
488
489	pxa_set_ffuart_info(NULL);
490	pxa_set_btuart_info(NULL);
491	pxa_set_stuart_info(NULL);
492	pxa_set_hwuart_info(NULL);
493
494	palmtc_mmc_init();
495	palmtc_keys_init();
496	palmtc_pwm_init();
497	palmtc_irda_init();
498	palmtc_mkp_init();
499	palmtc_udc_init();
500	palmtc_ts_init();
501	palmtc_nor_init();
502	palmtc_lcd_init();
503	palmtc_leds_init();
504};
505
506MACHINE_START(PALMTC, "Palm Tungsten|C")
507	.atag_offset 	= 0x100,
508	.map_io		= pxa25x_map_io,
509	.nr_irqs	= PXA_NR_IRQS,
510	.init_irq	= pxa25x_init_irq,
511	.handle_irq	= pxa25x_handle_irq,
512	.init_time	= pxa_timer_init,
513	.init_machine	= palmtc_init,
514	.restart	= pxa_restart,
515MACHINE_END
v4.10.11
  1/*
  2 * linux/arch/arm/mach-pxa/palmtc.c
  3 *
  4 * Support for the Palm Tungsten|C
  5 *
  6 * Author:	Marek Vasut <marek.vasut@gmail.com>
  7 *
  8 * Based on work of:
  9 *		Petr Blaha <p3t3@centrum.cz>
 10 *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
 11 *
 12 * This program is free software; you can redistribute it and/or modify
 13 * it under the terms of the GNU General Public License version 2 as
 14 * published by the Free Software Foundation.
 15 */
 16
 17#include <linux/platform_device.h>
 18#include <linux/delay.h>
 19#include <linux/irq.h>
 20#include <linux/input.h>
 21#include <linux/pwm.h>
 22#include <linux/pwm_backlight.h>
 23#include <linux/gpio.h>
 24#include <linux/input/matrix_keypad.h>
 25#include <linux/ucb1400.h>
 26#include <linux/power_supply.h>
 27#include <linux/gpio_keys.h>
 28#include <linux/mtd/physmap.h>
 29#include <linux/usb/gpio_vbus.h>
 30
 31#include <asm/mach-types.h>
 32#include <asm/mach/arch.h>
 33#include <asm/mach/map.h>
 34
 35#include "pxa25x.h"
 36#include <mach/audio.h>
 37#include <mach/palmtc.h>
 38#include <linux/platform_data/mmc-pxamci.h>
 39#include <linux/platform_data/video-pxafb.h>
 40#include <linux/platform_data/irda-pxaficp.h>
 41#include "udc.h"
 42
 43#include "generic.h"
 44#include "devices.h"
 45
 46/******************************************************************************
 47 * Pin configuration
 48 ******************************************************************************/
 49static unsigned long palmtc_pin_config[] __initdata = {
 50	/* MMC */
 51	GPIO6_MMC_CLK,
 52	GPIO8_MMC_CS0,
 53	GPIO12_GPIO,	/* detect */
 54	GPIO32_GPIO,	/* power */
 55	GPIO54_GPIO,	/* r/o switch */
 56
 57	/* PCMCIA */
 58	GPIO52_nPCE_1,
 59	GPIO53_nPCE_2,
 60	GPIO50_nPIOR,
 61	GPIO51_nPIOW,
 62	GPIO49_nPWE,
 63	GPIO48_nPOE,
 64	GPIO52_nPCE_1,
 65	GPIO53_nPCE_2,
 66	GPIO57_nIOIS16,
 67	GPIO56_nPWAIT,
 68
 69	/* AC97 */
 70	GPIO28_AC97_BITCLK,
 71	GPIO29_AC97_SDATA_IN_0,
 72	GPIO30_AC97_SDATA_OUT,
 73	GPIO31_AC97_SYNC,
 74
 75	/* IrDA */
 76	GPIO45_GPIO,	/* ir disable */
 77	GPIO46_FICP_RXD,
 78	GPIO47_FICP_TXD,
 79
 80	/* PWM */
 81	GPIO17_PWM1_OUT,
 82
 83	/* USB */
 84	GPIO4_GPIO,	/* detect */
 85	GPIO36_GPIO,	/* pullup */
 86
 87	/* LCD */
 88	GPIOxx_LCD_TFT_16BPP,
 89
 90	/* MATRIX KEYPAD */
 91	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
 92	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
 93	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
 94	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
 95	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
 96	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
 97	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
 98	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
 99	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
100	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
101	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
102	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
103	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
104	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
105	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
106	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
107
108	/* PXA GPIO KEYS */
109	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
110
111	/* MISC */
112	GPIO1_RST,	/* reset */
113	GPIO2_GPIO,	/* earphone detect */
114	GPIO16_GPIO,	/* backlight switch */
115};
116
117/******************************************************************************
118 * SD/MMC card controller
119 ******************************************************************************/
120#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
121static struct pxamci_platform_data palmtc_mci_platform_data = {
122	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
123	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
124	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
125	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
126	.detect_delay_ms	= 200,
127};
128
129static void __init palmtc_mmc_init(void)
130{
131	pxa_set_mci_info(&palmtc_mci_platform_data);
132}
133#else
134static inline void palmtc_mmc_init(void) {}
135#endif
136
137/******************************************************************************
138 * GPIO keys
139 ******************************************************************************/
140#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
141static struct gpio_keys_button palmtc_pxa_buttons[] = {
142	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
143};
144
145static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
146	.buttons	= palmtc_pxa_buttons,
147	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
148};
149
150static struct platform_device palmtc_pxa_keys = {
151	.name	= "gpio-keys",
152	.id	= -1,
153	.dev	= {
154		.platform_data = &palmtc_pxa_keys_data,
155	},
156};
157
158static void __init palmtc_keys_init(void)
159{
160	platform_device_register(&palmtc_pxa_keys);
161}
162#else
163static inline void palmtc_keys_init(void) {}
164#endif
165
166/******************************************************************************
167 * Backlight
168 ******************************************************************************/
169#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
170static struct pwm_lookup palmtc_pwm_lookup[] = {
171	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
172		   PWM_POLARITY_NORMAL),
173};
174
175static struct platform_pwm_backlight_data palmtc_backlight_data = {
 
176	.max_brightness	= PALMTC_MAX_INTENSITY,
177	.dft_brightness	= PALMTC_MAX_INTENSITY,
 
178	.enable_gpio	= GPIO_NR_PALMTC_BL_POWER,
179};
180
181static struct platform_device palmtc_backlight = {
182	.name	= "pwm-backlight",
183	.dev	= {
184		.parent		= &pxa25x_device_pwm1.dev,
185		.platform_data	= &palmtc_backlight_data,
186	},
187};
188
189static void __init palmtc_pwm_init(void)
190{
191	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
192	platform_device_register(&palmtc_backlight);
193}
194#else
195static inline void palmtc_pwm_init(void) {}
196#endif
197
198/******************************************************************************
199 * IrDA
200 ******************************************************************************/
201#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
202static struct pxaficp_platform_data palmtc_ficp_platform_data = {
203	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
204	.transceiver_cap	= IR_SIRMODE | IR_OFF,
205};
206
207static void __init palmtc_irda_init(void)
208{
209	pxa_set_ficp_info(&palmtc_ficp_platform_data);
210}
211#else
212static inline void palmtc_irda_init(void) {}
213#endif
214
215/******************************************************************************
216 * Keyboard
217 ******************************************************************************/
218#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
219static const uint32_t palmtc_matrix_keys[] = {
220	KEY(0, 0, KEY_F1),
221	KEY(0, 1, KEY_X),
222	KEY(0, 2, KEY_POWER),
223	KEY(0, 3, KEY_TAB),
224	KEY(0, 4, KEY_A),
225	KEY(0, 5, KEY_Q),
226	KEY(0, 6, KEY_LEFTSHIFT),
227	KEY(0, 7, KEY_Z),
228	KEY(0, 8, KEY_S),
229	KEY(0, 9, KEY_W),
230	KEY(0, 10, KEY_E),
231	KEY(0, 11, KEY_UP),
232
233	KEY(1, 0, KEY_F2),
234	KEY(1, 1, KEY_DOWN),
235	KEY(1, 3, KEY_D),
236	KEY(1, 4, KEY_C),
237	KEY(1, 5, KEY_F),
238	KEY(1, 6, KEY_R),
239	KEY(1, 7, KEY_SPACE),
240	KEY(1, 8, KEY_V),
241	KEY(1, 9, KEY_G),
242	KEY(1, 10, KEY_T),
243	KEY(1, 11, KEY_LEFT),
244
245	KEY(2, 0, KEY_F3),
246	KEY(2, 1, KEY_LEFTCTRL),
247	KEY(2, 3, KEY_H),
248	KEY(2, 4, KEY_Y),
249	KEY(2, 5, KEY_N),
250	KEY(2, 6, KEY_J),
251	KEY(2, 7, KEY_U),
252	KEY(2, 8, KEY_M),
253	KEY(2, 9, KEY_K),
254	KEY(2, 10, KEY_I),
255	KEY(2, 11, KEY_RIGHT),
256
257	KEY(3, 0, KEY_F4),
258	KEY(3, 1, KEY_ENTER),
259	KEY(3, 3, KEY_DOT),
260	KEY(3, 4, KEY_L),
261	KEY(3, 5, KEY_O),
262	KEY(3, 6, KEY_LEFTALT),
263	KEY(3, 7, KEY_ENTER),
264	KEY(3, 8, KEY_BACKSPACE),
265	KEY(3, 9, KEY_P),
266	KEY(3, 10, KEY_B),
267	KEY(3, 11, KEY_FN),
268};
269
270const struct matrix_keymap_data palmtc_keymap_data = {
271	.keymap			= palmtc_matrix_keys,
272	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
273};
274
275static const unsigned int palmtc_keypad_row_gpios[] = {
276	0, 9, 10, 11
277};
278
279static const unsigned int palmtc_keypad_col_gpios[] = {
280	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
281};
282
283static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
284	.keymap_data	= &palmtc_keymap_data,
285	.row_gpios	= palmtc_keypad_row_gpios,
286	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
287	.col_gpios	= palmtc_keypad_col_gpios,
288	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
289	.active_low	= 1,
290
291	.debounce_ms		= 20,
292	.col_scan_delay_us	= 5,
293};
294
295static struct platform_device palmtc_keyboard = {
296	.name	= "matrix-keypad",
297	.id	= -1,
298	.dev	= {
299		.platform_data = &palmtc_keypad_platform_data,
300	},
301};
302static void __init palmtc_mkp_init(void)
303{
304	platform_device_register(&palmtc_keyboard);
305}
306#else
307static inline void palmtc_mkp_init(void) {}
308#endif
309
310/******************************************************************************
311 * UDC
312 ******************************************************************************/
313#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
314static struct gpio_vbus_mach_info palmtc_udc_info = {
315	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
316	.gpio_vbus_inverted	= 1,
317	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
318};
319
320static struct platform_device palmtc_gpio_vbus = {
321	.name	= "gpio-vbus",
322	.id	= -1,
323	.dev	= {
324		.platform_data	= &palmtc_udc_info,
325	},
326};
327
328static void __init palmtc_udc_init(void)
329{
330	platform_device_register(&palmtc_gpio_vbus);
331};
332#else
333static inline void palmtc_udc_init(void) {}
334#endif
335
336/******************************************************************************
337 * Touchscreen / Battery / GPIO-extender
338 ******************************************************************************/
339#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
340	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
341static struct platform_device palmtc_ucb1400_device = {
342	.name	= "ucb1400_core",
343	.id	= -1,
344};
345
346static void __init palmtc_ts_init(void)
347{
348	pxa_set_ac97_info(NULL);
349	platform_device_register(&palmtc_ucb1400_device);
350}
351#else
352static inline void palmtc_ts_init(void) {}
353#endif
354
355/******************************************************************************
356 * LEDs
357 ******************************************************************************/
358#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
359struct gpio_led palmtc_gpio_leds[] = {
360{
361	.name			= "palmtc:green:user",
362	.default_trigger	= "none",
363	.gpio			= GPIO_NR_PALMTC_LED_POWER,
364	.active_low		= 1,
365}, {
366	.name			= "palmtc:vibra:vibra",
367	.default_trigger	= "none",
368	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
369	.active_low		= 1,
370}
371
372};
373
374static struct gpio_led_platform_data palmtc_gpio_led_info = {
375	.leds		= palmtc_gpio_leds,
376	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
377};
378
379static struct platform_device palmtc_leds = {
380	.name	= "leds-gpio",
381	.id	= -1,
382	.dev	= {
383		.platform_data	= &palmtc_gpio_led_info,
384	}
385};
386
387static void __init palmtc_leds_init(void)
388{
389	platform_device_register(&palmtc_leds);
390}
391#else
392static inline void palmtc_leds_init(void) {}
393#endif
394
395/******************************************************************************
396 * NOR Flash
397 ******************************************************************************/
398#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
399static struct resource palmtc_flash_resource = {
400	.start	= PXA_CS0_PHYS,
401	.end	= PXA_CS0_PHYS + SZ_16M - 1,
402	.flags	= IORESOURCE_MEM,
403};
404
405static struct mtd_partition palmtc_flash_parts[] = {
406	{
407		.name	= "U-Boot Bootloader",
408		.offset	= 0x0,
409		.size	= 0x40000,
410	},
411	{
412		.name	= "Linux Kernel",
413		.offset	= 0x40000,
414		.size	= 0x2c0000,
415	},
416	{
417		.name	= "Filesystem",
418		.offset	= 0x300000,
419		.size	= 0xcc0000,
420	},
421	{
422		.name	= "U-Boot Environment",
423		.offset	= 0xfc0000,
424		.size	= MTDPART_SIZ_FULL,
425	},
426};
427
428static struct physmap_flash_data palmtc_flash_data = {
429	.width		= 4,
430	.parts		= palmtc_flash_parts,
431	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
432};
433
434static struct platform_device palmtc_flash = {
435	.name		= "physmap-flash",
436	.id		= -1,
437	.resource	= &palmtc_flash_resource,
438	.num_resources	= 1,
439	.dev = {
440		.platform_data	= &palmtc_flash_data,
441	},
442};
443
444static void __init palmtc_nor_init(void)
445{
446	platform_device_register(&palmtc_flash);
447}
448#else
449static inline void palmtc_nor_init(void) {}
450#endif
451
452/******************************************************************************
453 * Framebuffer
454 ******************************************************************************/
455#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
456static struct pxafb_mode_info palmtc_lcd_modes[] = {
457	{
458		.pixclock	= 115384,
459		.xres		= 320,
460		.yres		= 320,
461		.bpp		= 16,
462
463		.left_margin	= 27,
464		.right_margin	= 7,
465		.upper_margin	= 7,
466		.lower_margin	= 8,
467
468		.hsync_len	= 6,
469		.vsync_len	= 1,
470	},
471};
472
473static struct pxafb_mach_info palmtc_lcd_screen = {
474	.modes			= palmtc_lcd_modes,
475	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
476	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
477};
478
479static void __init palmtc_lcd_init(void)
480{
481	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
482}
483#else
484static inline void palmtc_lcd_init(void) {}
485#endif
486
487/******************************************************************************
488 * Machine init
489 ******************************************************************************/
490static void __init palmtc_init(void)
491{
492	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
493
494	pxa_set_ffuart_info(NULL);
495	pxa_set_btuart_info(NULL);
496	pxa_set_stuart_info(NULL);
497	pxa_set_hwuart_info(NULL);
498
499	palmtc_mmc_init();
500	palmtc_keys_init();
501	palmtc_pwm_init();
502	palmtc_irda_init();
503	palmtc_mkp_init();
504	palmtc_udc_init();
505	palmtc_ts_init();
506	palmtc_nor_init();
507	palmtc_lcd_init();
508	palmtc_leds_init();
509};
510
511MACHINE_START(PALMTC, "Palm Tungsten|C")
512	.atag_offset 	= 0x100,
513	.map_io		= pxa25x_map_io,
514	.nr_irqs	= PXA_NR_IRQS,
515	.init_irq	= pxa25x_init_irq,
516	.handle_irq	= pxa25x_handle_irq,
517	.init_time	= pxa_timer_init,
518	.init_machine	= palmtc_init,
519	.restart	= pxa_restart,
520MACHINE_END