Loading...
1/*
2 * SPEAr thermal driver.
3 *
4 * Copyright (C) 2011-2012 ST Microelectronics
5 * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
6 *
7 * This software is licensed under the terms of the GNU General Public
8 * License version 2, as published by the Free Software Foundation, and
9 * may be copied, distributed, and modified under those terms.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 */
17
18#include <linux/clk.h>
19#include <linux/device.h>
20#include <linux/err.h>
21#include <linux/io.h>
22#include <linux/kernel.h>
23#include <linux/of.h>
24#include <linux/module.h>
25#include <linux/platform_device.h>
26#include <linux/thermal.h>
27
28#define MD_FACTOR 1000
29
30/* SPEAr Thermal Sensor Dev Structure */
31struct spear_thermal_dev {
32 /* pointer to base address of the thermal sensor */
33 void __iomem *thermal_base;
34 /* clk structure */
35 struct clk *clk;
36 /* pointer to thermal flags */
37 unsigned int flags;
38};
39
40static inline int thermal_get_temp(struct thermal_zone_device *thermal,
41 unsigned long *temp)
42{
43 struct spear_thermal_dev *stdev = thermal->devdata;
44
45 /*
46 * Data are ready to be read after 628 usec from POWERDOWN signal
47 * (PDN) = 1
48 */
49 *temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR;
50 return 0;
51}
52
53static struct thermal_zone_device_ops ops = {
54 .get_temp = thermal_get_temp,
55};
56
57#ifdef CONFIG_PM
58static int spear_thermal_suspend(struct device *dev)
59{
60 struct platform_device *pdev = to_platform_device(dev);
61 struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
62 struct spear_thermal_dev *stdev = spear_thermal->devdata;
63 unsigned int actual_mask = 0;
64
65 /* Disable SPEAr Thermal Sensor */
66 actual_mask = readl_relaxed(stdev->thermal_base);
67 writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
68
69 clk_disable(stdev->clk);
70 dev_info(dev, "Suspended.\n");
71
72 return 0;
73}
74
75static int spear_thermal_resume(struct device *dev)
76{
77 struct platform_device *pdev = to_platform_device(dev);
78 struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
79 struct spear_thermal_dev *stdev = spear_thermal->devdata;
80 unsigned int actual_mask = 0;
81 int ret = 0;
82
83 ret = clk_enable(stdev->clk);
84 if (ret) {
85 dev_err(&pdev->dev, "Can't enable clock\n");
86 return ret;
87 }
88
89 /* Enable SPEAr Thermal Sensor */
90 actual_mask = readl_relaxed(stdev->thermal_base);
91 writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base);
92
93 dev_info(dev, "Resumed.\n");
94
95 return 0;
96}
97#endif
98
99static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend,
100 spear_thermal_resume);
101
102static int spear_thermal_probe(struct platform_device *pdev)
103{
104 struct thermal_zone_device *spear_thermal = NULL;
105 struct spear_thermal_dev *stdev;
106 struct device_node *np = pdev->dev.of_node;
107 struct resource *res;
108 int ret = 0, val;
109
110 if (!np || !of_property_read_u32(np, "st,thermal-flags", &val)) {
111 dev_err(&pdev->dev, "Failed: DT Pdata not passed\n");
112 return -EINVAL;
113 }
114
115 stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL);
116 if (!stdev) {
117 dev_err(&pdev->dev, "kzalloc fail\n");
118 return -ENOMEM;
119 }
120
121 /* Enable thermal sensor */
122 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
123 stdev->thermal_base = devm_ioremap_resource(&pdev->dev, res);
124 if (IS_ERR(stdev->thermal_base))
125 return PTR_ERR(stdev->thermal_base);
126
127 stdev->clk = devm_clk_get(&pdev->dev, NULL);
128 if (IS_ERR(stdev->clk)) {
129 dev_err(&pdev->dev, "Can't get clock\n");
130 return PTR_ERR(stdev->clk);
131 }
132
133 ret = clk_enable(stdev->clk);
134 if (ret) {
135 dev_err(&pdev->dev, "Can't enable clock\n");
136 return ret;
137 }
138
139 stdev->flags = val;
140 writel_relaxed(stdev->flags, stdev->thermal_base);
141
142 spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0,
143 stdev, &ops, NULL, 0, 0);
144 if (IS_ERR(spear_thermal)) {
145 dev_err(&pdev->dev, "thermal zone device is NULL\n");
146 ret = PTR_ERR(spear_thermal);
147 goto disable_clk;
148 }
149
150 platform_set_drvdata(pdev, spear_thermal);
151
152 dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%p.\n",
153 stdev->thermal_base);
154
155 return 0;
156
157disable_clk:
158 clk_disable(stdev->clk);
159
160 return ret;
161}
162
163static int spear_thermal_exit(struct platform_device *pdev)
164{
165 unsigned int actual_mask = 0;
166 struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
167 struct spear_thermal_dev *stdev = spear_thermal->devdata;
168
169 thermal_zone_device_unregister(spear_thermal);
170
171 /* Disable SPEAr Thermal Sensor */
172 actual_mask = readl_relaxed(stdev->thermal_base);
173 writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
174
175 clk_disable(stdev->clk);
176
177 return 0;
178}
179
180static const struct of_device_id spear_thermal_id_table[] = {
181 { .compatible = "st,thermal-spear1340" },
182 {}
183};
184MODULE_DEVICE_TABLE(of, spear_thermal_id_table);
185
186static struct platform_driver spear_thermal_driver = {
187 .probe = spear_thermal_probe,
188 .remove = spear_thermal_exit,
189 .driver = {
190 .name = "spear_thermal",
191 .owner = THIS_MODULE,
192 .pm = &spear_thermal_pm_ops,
193 .of_match_table = spear_thermal_id_table,
194 },
195};
196
197module_platform_driver(spear_thermal_driver);
198
199MODULE_AUTHOR("Vincenzo Frascino <vincenzo.frascino@st.com>");
200MODULE_DESCRIPTION("SPEAr thermal driver");
201MODULE_LICENSE("GPL");
1/*
2 * SPEAr thermal driver.
3 *
4 * Copyright (C) 2011-2012 ST Microelectronics
5 * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
6 *
7 * This software is licensed under the terms of the GNU General Public
8 * License version 2, as published by the Free Software Foundation, and
9 * may be copied, distributed, and modified under those terms.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 */
17
18#include <linux/clk.h>
19#include <linux/device.h>
20#include <linux/err.h>
21#include <linux/io.h>
22#include <linux/kernel.h>
23#include <linux/module.h>
24#include <linux/platform_device.h>
25#include <linux/platform_data/spear_thermal.h>
26#include <linux/thermal.h>
27
28#define MD_FACTOR 1000
29
30/* SPEAr Thermal Sensor Dev Structure */
31struct spear_thermal_dev {
32 /* pointer to base address of the thermal sensor */
33 void __iomem *thermal_base;
34 /* clk structure */
35 struct clk *clk;
36 /* pointer to thermal flags */
37 unsigned int flags;
38};
39
40static inline int thermal_get_temp(struct thermal_zone_device *thermal,
41 unsigned long *temp)
42{
43 struct spear_thermal_dev *stdev = thermal->devdata;
44
45 /*
46 * Data are ready to be read after 628 usec from POWERDOWN signal
47 * (PDN) = 1
48 */
49 *temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR;
50 return 0;
51}
52
53static struct thermal_zone_device_ops ops = {
54 .get_temp = thermal_get_temp,
55};
56
57#ifdef CONFIG_PM
58static int spear_thermal_suspend(struct device *dev)
59{
60 struct platform_device *pdev = to_platform_device(dev);
61 struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
62 struct spear_thermal_dev *stdev = spear_thermal->devdata;
63 unsigned int actual_mask = 0;
64
65 /* Disable SPEAr Thermal Sensor */
66 actual_mask = readl_relaxed(stdev->thermal_base);
67 writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
68
69 clk_disable(stdev->clk);
70 dev_info(dev, "Suspended.\n");
71
72 return 0;
73}
74
75static int spear_thermal_resume(struct device *dev)
76{
77 struct platform_device *pdev = to_platform_device(dev);
78 struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
79 struct spear_thermal_dev *stdev = spear_thermal->devdata;
80 unsigned int actual_mask = 0;
81 int ret = 0;
82
83 ret = clk_enable(stdev->clk);
84 if (ret) {
85 dev_err(&pdev->dev, "Can't enable clock\n");
86 return ret;
87 }
88
89 /* Enable SPEAr Thermal Sensor */
90 actual_mask = readl_relaxed(stdev->thermal_base);
91 writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base);
92
93 dev_info(dev, "Resumed.\n");
94
95 return 0;
96}
97#endif
98
99static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend,
100 spear_thermal_resume);
101
102static int spear_thermal_probe(struct platform_device *pdev)
103{
104 struct thermal_zone_device *spear_thermal = NULL;
105 struct spear_thermal_dev *stdev;
106 struct spear_thermal_pdata *pdata;
107 int ret = 0;
108 struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
109
110 if (!stres) {
111 dev_err(&pdev->dev, "memory resource missing\n");
112 return -ENODEV;
113 }
114
115 pdata = dev_get_platdata(&pdev->dev);
116 if (!pdata) {
117 dev_err(&pdev->dev, "platform data is NULL\n");
118 return -EINVAL;
119 }
120
121 stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL);
122 if (!stdev) {
123 dev_err(&pdev->dev, "kzalloc fail\n");
124 return -ENOMEM;
125 }
126
127 /* Enable thermal sensor */
128 stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start,
129 resource_size(stres));
130 if (!stdev->thermal_base) {
131 dev_err(&pdev->dev, "ioremap failed\n");
132 return -ENOMEM;
133 }
134
135 stdev->clk = clk_get(&pdev->dev, NULL);
136 if (IS_ERR(stdev->clk)) {
137 dev_err(&pdev->dev, "Can't get clock\n");
138 return PTR_ERR(stdev->clk);
139 }
140
141 ret = clk_enable(stdev->clk);
142 if (ret) {
143 dev_err(&pdev->dev, "Can't enable clock\n");
144 goto put_clk;
145 }
146
147 stdev->flags = pdata->thermal_flags;
148 writel_relaxed(stdev->flags, stdev->thermal_base);
149
150 spear_thermal = thermal_zone_device_register("spear_thermal", 0,
151 stdev, &ops, 0, 0, 0, 0);
152 if (IS_ERR(spear_thermal)) {
153 dev_err(&pdev->dev, "thermal zone device is NULL\n");
154 ret = PTR_ERR(spear_thermal);
155 goto disable_clk;
156 }
157
158 platform_set_drvdata(pdev, spear_thermal);
159
160 dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%p.\n",
161 stdev->thermal_base);
162
163 return 0;
164
165disable_clk:
166 clk_disable(stdev->clk);
167put_clk:
168 clk_put(stdev->clk);
169
170 return ret;
171}
172
173static int spear_thermal_exit(struct platform_device *pdev)
174{
175 unsigned int actual_mask = 0;
176 struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
177 struct spear_thermal_dev *stdev = spear_thermal->devdata;
178
179 thermal_zone_device_unregister(spear_thermal);
180 platform_set_drvdata(pdev, NULL);
181
182 /* Disable SPEAr Thermal Sensor */
183 actual_mask = readl_relaxed(stdev->thermal_base);
184 writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
185
186 clk_disable(stdev->clk);
187 clk_put(stdev->clk);
188
189 return 0;
190}
191
192static struct platform_driver spear_thermal_driver = {
193 .probe = spear_thermal_probe,
194 .remove = spear_thermal_exit,
195 .driver = {
196 .name = "spear_thermal",
197 .owner = THIS_MODULE,
198 .pm = &spear_thermal_pm_ops,
199 },
200};
201
202module_platform_driver(spear_thermal_driver);
203
204MODULE_AUTHOR("Vincenzo Frascino <vincenzo.frascino@st.com>");
205MODULE_DESCRIPTION("SPEAr thermal driver");
206MODULE_LICENSE("GPL");