Loading...
1/*
2 * linux/arch/arm/mach-omap1/devices.c
3 *
4 * OMAP1 platform device setup/initialization
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 */
11
12#include <linux/dma-mapping.h>
13#include <linux/gpio.h>
14#include <linux/module.h>
15#include <linux/kernel.h>
16#include <linux/init.h>
17#include <linux/platform_device.h>
18#include <linux/spi/spi.h>
19
20#include <linux/platform_data/omap-wd-timer.h>
21
22#include <asm/mach/map.h>
23
24#include <mach/tc.h>
25#include <mach/mux.h>
26
27#include <mach/omap7xx.h>
28#include <mach/camera.h>
29#include <mach/hardware.h>
30
31#include "common.h"
32#include "clock.h"
33#include "mmc.h"
34#include "sram.h"
35
36#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
37
38static struct platform_device omap_pcm = {
39 .name = "omap-pcm-audio",
40 .id = -1,
41};
42
43static void omap_init_audio(void)
44{
45 platform_device_register(&omap_pcm);
46}
47
48#else
49static inline void omap_init_audio(void) {}
50#endif
51
52/*-------------------------------------------------------------------------*/
53
54#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
55
56#define OMAP_RTC_BASE 0xfffb4800
57
58static struct resource rtc_resources[] = {
59 {
60 .start = OMAP_RTC_BASE,
61 .end = OMAP_RTC_BASE + 0x5f,
62 .flags = IORESOURCE_MEM,
63 },
64 {
65 .start = INT_RTC_TIMER,
66 .flags = IORESOURCE_IRQ,
67 },
68 {
69 .start = INT_RTC_ALARM,
70 .flags = IORESOURCE_IRQ,
71 },
72};
73
74static struct platform_device omap_rtc_device = {
75 .name = "omap_rtc",
76 .id = -1,
77 .num_resources = ARRAY_SIZE(rtc_resources),
78 .resource = rtc_resources,
79};
80
81static void omap_init_rtc(void)
82{
83 (void) platform_device_register(&omap_rtc_device);
84}
85#else
86static inline void omap_init_rtc(void) {}
87#endif
88
89static inline void omap_init_mbox(void) { }
90
91/*-------------------------------------------------------------------------*/
92
93#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
94
95static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
96 int controller_nr)
97{
98 if (controller_nr == 0) {
99 if (cpu_is_omap7xx()) {
100 omap_cfg_reg(MMC_7XX_CMD);
101 omap_cfg_reg(MMC_7XX_CLK);
102 omap_cfg_reg(MMC_7XX_DAT0);
103 } else {
104 omap_cfg_reg(MMC_CMD);
105 omap_cfg_reg(MMC_CLK);
106 omap_cfg_reg(MMC_DAT0);
107 }
108
109 if (cpu_is_omap1710()) {
110 omap_cfg_reg(M15_1710_MMC_CLKI);
111 omap_cfg_reg(P19_1710_MMC_CMDDIR);
112 omap_cfg_reg(P20_1710_MMC_DATDIR0);
113 }
114 if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
115 omap_cfg_reg(MMC_DAT1);
116 /* NOTE: DAT2 can be on W10 (here) or M15 */
117 if (!mmc_controller->slots[0].nomux)
118 omap_cfg_reg(MMC_DAT2);
119 omap_cfg_reg(MMC_DAT3);
120 }
121 }
122
123 /* Block 2 is on newer chips, and has many pinout options */
124 if (cpu_is_omap16xx() && controller_nr == 1) {
125 if (!mmc_controller->slots[1].nomux) {
126 omap_cfg_reg(Y8_1610_MMC2_CMD);
127 omap_cfg_reg(Y10_1610_MMC2_CLK);
128 omap_cfg_reg(R18_1610_MMC2_CLKIN);
129 omap_cfg_reg(W8_1610_MMC2_DAT0);
130 if (mmc_controller->slots[1].wires == 4) {
131 omap_cfg_reg(V8_1610_MMC2_DAT1);
132 omap_cfg_reg(W15_1610_MMC2_DAT2);
133 omap_cfg_reg(R10_1610_MMC2_DAT3);
134 }
135
136 /* These are needed for the level shifter */
137 omap_cfg_reg(V9_1610_MMC2_CMDDIR);
138 omap_cfg_reg(V5_1610_MMC2_DATDIR0);
139 omap_cfg_reg(W19_1610_MMC2_DATDIR1);
140 }
141
142 /* Feedback clock must be set on OMAP-1710 MMC2 */
143 if (cpu_is_omap1710())
144 omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
145 MOD_CONF_CTRL_1);
146 }
147}
148
149#define OMAP_MMC_NR_RES 4
150
151/*
152 * Register MMC devices.
153 */
154static int __init omap_mmc_add(const char *name, int id, unsigned long base,
155 unsigned long size, unsigned int irq,
156 unsigned rx_req, unsigned tx_req,
157 struct omap_mmc_platform_data *data)
158{
159 struct platform_device *pdev;
160 struct resource res[OMAP_MMC_NR_RES];
161 int ret;
162
163 pdev = platform_device_alloc(name, id);
164 if (!pdev)
165 return -ENOMEM;
166
167 memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
168 res[0].start = base;
169 res[0].end = base + size - 1;
170 res[0].flags = IORESOURCE_MEM;
171 res[1].start = res[1].end = irq;
172 res[1].flags = IORESOURCE_IRQ;
173 res[2].start = rx_req;
174 res[2].name = "rx";
175 res[2].flags = IORESOURCE_DMA;
176 res[3].start = tx_req;
177 res[3].name = "tx";
178 res[3].flags = IORESOURCE_DMA;
179
180 if (cpu_is_omap7xx())
181 data->slots[0].features = MMC_OMAP7XX;
182 if (cpu_is_omap15xx())
183 data->slots[0].features = MMC_OMAP15XX;
184 if (cpu_is_omap16xx())
185 data->slots[0].features = MMC_OMAP16XX;
186
187 ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
188 if (ret == 0)
189 ret = platform_device_add_data(pdev, data, sizeof(*data));
190 if (ret)
191 goto fail;
192
193 ret = platform_device_add(pdev);
194 if (ret)
195 goto fail;
196
197 /* return device handle to board setup code */
198 data->dev = &pdev->dev;
199 return 0;
200
201fail:
202 platform_device_put(pdev);
203 return ret;
204}
205
206void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
207 int nr_controllers)
208{
209 int i;
210
211 for (i = 0; i < nr_controllers; i++) {
212 unsigned long base, size;
213 unsigned rx_req, tx_req;
214 unsigned int irq = 0;
215
216 if (!mmc_data[i])
217 continue;
218
219 omap1_mmc_mux(mmc_data[i], i);
220
221 switch (i) {
222 case 0:
223 base = OMAP1_MMC1_BASE;
224 irq = INT_MMC;
225 rx_req = 22;
226 tx_req = 21;
227 break;
228 case 1:
229 if (!cpu_is_omap16xx())
230 return;
231 base = OMAP1_MMC2_BASE;
232 irq = INT_1610_MMC2;
233 rx_req = 55;
234 tx_req = 54;
235 break;
236 default:
237 continue;
238 }
239 size = OMAP1_MMC_SIZE;
240
241 omap_mmc_add("mmci-omap", i, base, size, irq,
242 rx_req, tx_req, mmc_data[i]);
243 }
244}
245
246#endif
247
248/*-------------------------------------------------------------------------*/
249
250/* OMAP7xx SPI support */
251#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
252
253struct platform_device omap_spi1 = {
254 .name = "omap1_spi100k",
255 .id = 1,
256};
257
258struct platform_device omap_spi2 = {
259 .name = "omap1_spi100k",
260 .id = 2,
261};
262
263static void omap_init_spi100k(void)
264{
265 omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
266 if (omap_spi1.dev.platform_data)
267 platform_device_register(&omap_spi1);
268
269 omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
270 if (omap_spi2.dev.platform_data)
271 platform_device_register(&omap_spi2);
272}
273
274#else
275static inline void omap_init_spi100k(void)
276{
277}
278#endif
279
280
281#define OMAP1_CAMERA_BASE 0xfffb6800
282#define OMAP1_CAMERA_IOSIZE 0x1c
283
284static struct resource omap1_camera_resources[] = {
285 [0] = {
286 .start = OMAP1_CAMERA_BASE,
287 .end = OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
288 .flags = IORESOURCE_MEM,
289 },
290 [1] = {
291 .start = INT_CAMERA,
292 .flags = IORESOURCE_IRQ,
293 },
294};
295
296static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);
297
298static struct platform_device omap1_camera_device = {
299 .name = "omap1-camera",
300 .id = 0, /* This is used to put cameras on this interface */
301 .dev = {
302 .dma_mask = &omap1_camera_dma_mask,
303 .coherent_dma_mask = DMA_BIT_MASK(32),
304 },
305 .num_resources = ARRAY_SIZE(omap1_camera_resources),
306 .resource = omap1_camera_resources,
307};
308
309void __init omap1_camera_init(void *info)
310{
311 struct platform_device *dev = &omap1_camera_device;
312 int ret;
313
314 dev->dev.platform_data = info;
315
316 ret = platform_device_register(dev);
317 if (ret)
318 dev_err(&dev->dev, "unable to register device: %d\n", ret);
319}
320
321
322/*-------------------------------------------------------------------------*/
323
324static inline void omap_init_sti(void) {}
325
326/* Numbering for the SPI-capable controllers when used for SPI:
327 * spi = 1
328 * uwire = 2
329 * mmc1..2 = 3..4
330 * mcbsp1..3 = 5..7
331 */
332
333#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
334
335#define OMAP_UWIRE_BASE 0xfffb3000
336
337static struct resource uwire_resources[] = {
338 {
339 .start = OMAP_UWIRE_BASE,
340 .end = OMAP_UWIRE_BASE + 0x20,
341 .flags = IORESOURCE_MEM,
342 },
343};
344
345static struct platform_device omap_uwire_device = {
346 .name = "omap_uwire",
347 .id = -1,
348 .num_resources = ARRAY_SIZE(uwire_resources),
349 .resource = uwire_resources,
350};
351
352static void omap_init_uwire(void)
353{
354 /* FIXME define and use a boot tag; not all boards will be hooking
355 * up devices to the microwire controller, and multi-board configs
356 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
357 */
358
359 /* board-specific code must configure chipselects (only a few
360 * are normally used) and SCLK/SDI/SDO (each has two choices).
361 */
362 (void) platform_device_register(&omap_uwire_device);
363}
364#else
365static inline void omap_init_uwire(void) {}
366#endif
367
368
369#define OMAP1_RNG_BASE 0xfffe5000
370
371static struct resource omap1_rng_resources[] = {
372 {
373 .start = OMAP1_RNG_BASE,
374 .end = OMAP1_RNG_BASE + 0x4f,
375 .flags = IORESOURCE_MEM,
376 },
377};
378
379static struct platform_device omap1_rng_device = {
380 .name = "omap_rng",
381 .id = -1,
382 .num_resources = ARRAY_SIZE(omap1_rng_resources),
383 .resource = omap1_rng_resources,
384};
385
386static void omap1_init_rng(void)
387{
388 if (!cpu_is_omap16xx())
389 return;
390
391 (void) platform_device_register(&omap1_rng_device);
392}
393
394/*-------------------------------------------------------------------------*/
395
396/*
397 * This gets called after board-specific INIT_MACHINE, and initializes most
398 * on-chip peripherals accessible on this board (except for few like USB):
399 *
400 * (a) Does any "standard config" pin muxing needed. Board-specific
401 * code will have muxed GPIO pins and done "nonstandard" setup;
402 * that code could live in the boot loader.
403 * (b) Populating board-specific platform_data with the data drivers
404 * rely on to handle wiring variations.
405 * (c) Creating platform devices as meaningful on this board and
406 * with this kernel configuration.
407 *
408 * Claiming GPIOs, and setting their direction and initial values, is the
409 * responsibility of the device drivers. So is responding to probe().
410 *
411 * Board-specific knowledge like creating devices or pin setup is to be
412 * kept out of drivers as much as possible. In particular, pin setup
413 * may be handled by the boot loader, and drivers should expect it will
414 * normally have been done by the time they're probed.
415 */
416static int __init omap1_init_devices(void)
417{
418 if (!cpu_class_is_omap1())
419 return -ENODEV;
420
421 omap_sram_init();
422 omap1_clk_late_init();
423
424 /* please keep these calls, and their implementations above,
425 * in alphabetical order so they're easier to sort through.
426 */
427
428 omap_init_audio();
429 omap_init_mbox();
430 omap_init_rtc();
431 omap_init_spi100k();
432 omap_init_sti();
433 omap_init_uwire();
434 omap1_init_rng();
435
436 return 0;
437}
438arch_initcall(omap1_init_devices);
439
440#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
441
442static struct resource wdt_resources[] = {
443 {
444 .start = 0xfffeb000,
445 .end = 0xfffeb07F,
446 .flags = IORESOURCE_MEM,
447 },
448};
449
450static struct platform_device omap_wdt_device = {
451 .name = "omap_wdt",
452 .id = -1,
453 .num_resources = ARRAY_SIZE(wdt_resources),
454 .resource = wdt_resources,
455};
456
457static int __init omap_init_wdt(void)
458{
459 struct omap_wd_timer_platform_data pdata;
460 int ret;
461
462 if (!cpu_is_omap16xx())
463 return -ENODEV;
464
465 pdata.read_reset_sources = omap1_get_reset_sources;
466
467 ret = platform_device_register(&omap_wdt_device);
468 if (!ret) {
469 ret = platform_device_add_data(&omap_wdt_device, &pdata,
470 sizeof(pdata));
471 if (ret)
472 platform_device_del(&omap_wdt_device);
473 }
474
475 return ret;
476}
477subsys_initcall(omap_init_wdt);
478#endif
1/*
2 * linux/arch/arm/mach-omap1/devices.c
3 *
4 * OMAP1 platform device setup/initialization
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 */
11
12#include <linux/dma-mapping.h>
13#include <linux/gpio.h>
14#include <linux/module.h>
15#include <linux/kernel.h>
16#include <linux/init.h>
17#include <linux/platform_device.h>
18#include <linux/spi/spi.h>
19
20#include <asm/mach/map.h>
21
22#include <plat/tc.h>
23#include <plat/board.h>
24#include <plat/mux.h>
25#include <plat/dma.h>
26#include <plat/mmc.h>
27#include <plat/omap7xx.h>
28
29#include <mach/camera.h>
30#include <mach/hardware.h>
31
32#include "common.h"
33#include "clock.h"
34
35#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
36
37static struct platform_device omap_pcm = {
38 .name = "omap-pcm-audio",
39 .id = -1,
40};
41
42static void omap_init_audio(void)
43{
44 platform_device_register(&omap_pcm);
45}
46
47#else
48static inline void omap_init_audio(void) {}
49#endif
50
51/*-------------------------------------------------------------------------*/
52
53#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
54
55#define OMAP_RTC_BASE 0xfffb4800
56
57static struct resource rtc_resources[] = {
58 {
59 .start = OMAP_RTC_BASE,
60 .end = OMAP_RTC_BASE + 0x5f,
61 .flags = IORESOURCE_MEM,
62 },
63 {
64 .start = INT_RTC_TIMER,
65 .flags = IORESOURCE_IRQ,
66 },
67 {
68 .start = INT_RTC_ALARM,
69 .flags = IORESOURCE_IRQ,
70 },
71};
72
73static struct platform_device omap_rtc_device = {
74 .name = "omap_rtc",
75 .id = -1,
76 .num_resources = ARRAY_SIZE(rtc_resources),
77 .resource = rtc_resources,
78};
79
80static void omap_init_rtc(void)
81{
82 (void) platform_device_register(&omap_rtc_device);
83}
84#else
85static inline void omap_init_rtc(void) {}
86#endif
87
88static inline void omap_init_mbox(void) { }
89
90/*-------------------------------------------------------------------------*/
91
92#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
93
94static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
95 int controller_nr)
96{
97 if (controller_nr == 0) {
98 if (cpu_is_omap7xx()) {
99 omap_cfg_reg(MMC_7XX_CMD);
100 omap_cfg_reg(MMC_7XX_CLK);
101 omap_cfg_reg(MMC_7XX_DAT0);
102 } else {
103 omap_cfg_reg(MMC_CMD);
104 omap_cfg_reg(MMC_CLK);
105 omap_cfg_reg(MMC_DAT0);
106 }
107
108 if (cpu_is_omap1710()) {
109 omap_cfg_reg(M15_1710_MMC_CLKI);
110 omap_cfg_reg(P19_1710_MMC_CMDDIR);
111 omap_cfg_reg(P20_1710_MMC_DATDIR0);
112 }
113 if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
114 omap_cfg_reg(MMC_DAT1);
115 /* NOTE: DAT2 can be on W10 (here) or M15 */
116 if (!mmc_controller->slots[0].nomux)
117 omap_cfg_reg(MMC_DAT2);
118 omap_cfg_reg(MMC_DAT3);
119 }
120 }
121
122 /* Block 2 is on newer chips, and has many pinout options */
123 if (cpu_is_omap16xx() && controller_nr == 1) {
124 if (!mmc_controller->slots[1].nomux) {
125 omap_cfg_reg(Y8_1610_MMC2_CMD);
126 omap_cfg_reg(Y10_1610_MMC2_CLK);
127 omap_cfg_reg(R18_1610_MMC2_CLKIN);
128 omap_cfg_reg(W8_1610_MMC2_DAT0);
129 if (mmc_controller->slots[1].wires == 4) {
130 omap_cfg_reg(V8_1610_MMC2_DAT1);
131 omap_cfg_reg(W15_1610_MMC2_DAT2);
132 omap_cfg_reg(R10_1610_MMC2_DAT3);
133 }
134
135 /* These are needed for the level shifter */
136 omap_cfg_reg(V9_1610_MMC2_CMDDIR);
137 omap_cfg_reg(V5_1610_MMC2_DATDIR0);
138 omap_cfg_reg(W19_1610_MMC2_DATDIR1);
139 }
140
141 /* Feedback clock must be set on OMAP-1710 MMC2 */
142 if (cpu_is_omap1710())
143 omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
144 MOD_CONF_CTRL_1);
145 }
146}
147
148#define OMAP_MMC_NR_RES 4
149
150/*
151 * Register MMC devices.
152 */
153static int __init omap_mmc_add(const char *name, int id, unsigned long base,
154 unsigned long size, unsigned int irq,
155 unsigned rx_req, unsigned tx_req,
156 struct omap_mmc_platform_data *data)
157{
158 struct platform_device *pdev;
159 struct resource res[OMAP_MMC_NR_RES];
160 int ret;
161
162 pdev = platform_device_alloc(name, id);
163 if (!pdev)
164 return -ENOMEM;
165
166 memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
167 res[0].start = base;
168 res[0].end = base + size - 1;
169 res[0].flags = IORESOURCE_MEM;
170 res[1].start = res[1].end = irq;
171 res[1].flags = IORESOURCE_IRQ;
172 res[2].start = rx_req;
173 res[2].name = "rx";
174 res[2].flags = IORESOURCE_DMA;
175 res[3].start = tx_req;
176 res[3].name = "tx";
177 res[3].flags = IORESOURCE_DMA;
178
179 ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
180 if (ret == 0)
181 ret = platform_device_add_data(pdev, data, sizeof(*data));
182 if (ret)
183 goto fail;
184
185 ret = platform_device_add(pdev);
186 if (ret)
187 goto fail;
188
189 /* return device handle to board setup code */
190 data->dev = &pdev->dev;
191 return 0;
192
193fail:
194 platform_device_put(pdev);
195 return ret;
196}
197
198void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
199 int nr_controllers)
200{
201 int i;
202
203 for (i = 0; i < nr_controllers; i++) {
204 unsigned long base, size;
205 unsigned rx_req, tx_req;
206 unsigned int irq = 0;
207
208 if (!mmc_data[i])
209 continue;
210
211 omap1_mmc_mux(mmc_data[i], i);
212
213 switch (i) {
214 case 0:
215 base = OMAP1_MMC1_BASE;
216 irq = INT_MMC;
217 rx_req = OMAP_DMA_MMC_RX;
218 tx_req = OMAP_DMA_MMC_TX;
219 break;
220 case 1:
221 if (!cpu_is_omap16xx())
222 return;
223 base = OMAP1_MMC2_BASE;
224 irq = INT_1610_MMC2;
225 rx_req = OMAP_DMA_MMC2_RX;
226 tx_req = OMAP_DMA_MMC2_TX;
227 break;
228 default:
229 continue;
230 }
231 size = OMAP1_MMC_SIZE;
232
233 omap_mmc_add("mmci-omap", i, base, size, irq,
234 rx_req, tx_req, mmc_data[i]);
235 };
236}
237
238#endif
239
240/*-------------------------------------------------------------------------*/
241
242/* OMAP7xx SPI support */
243#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
244
245struct platform_device omap_spi1 = {
246 .name = "omap1_spi100k",
247 .id = 1,
248};
249
250struct platform_device omap_spi2 = {
251 .name = "omap1_spi100k",
252 .id = 2,
253};
254
255static void omap_init_spi100k(void)
256{
257 omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
258 if (omap_spi1.dev.platform_data)
259 platform_device_register(&omap_spi1);
260
261 omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
262 if (omap_spi2.dev.platform_data)
263 platform_device_register(&omap_spi2);
264}
265
266#else
267static inline void omap_init_spi100k(void)
268{
269}
270#endif
271
272
273#define OMAP1_CAMERA_BASE 0xfffb6800
274#define OMAP1_CAMERA_IOSIZE 0x1c
275
276static struct resource omap1_camera_resources[] = {
277 [0] = {
278 .start = OMAP1_CAMERA_BASE,
279 .end = OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
280 .flags = IORESOURCE_MEM,
281 },
282 [1] = {
283 .start = INT_CAMERA,
284 .flags = IORESOURCE_IRQ,
285 },
286};
287
288static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);
289
290static struct platform_device omap1_camera_device = {
291 .name = "omap1-camera",
292 .id = 0, /* This is used to put cameras on this interface */
293 .dev = {
294 .dma_mask = &omap1_camera_dma_mask,
295 .coherent_dma_mask = DMA_BIT_MASK(32),
296 },
297 .num_resources = ARRAY_SIZE(omap1_camera_resources),
298 .resource = omap1_camera_resources,
299};
300
301void __init omap1_camera_init(void *info)
302{
303 struct platform_device *dev = &omap1_camera_device;
304 int ret;
305
306 dev->dev.platform_data = info;
307
308 ret = platform_device_register(dev);
309 if (ret)
310 dev_err(&dev->dev, "unable to register device: %d\n", ret);
311}
312
313
314/*-------------------------------------------------------------------------*/
315
316static inline void omap_init_sti(void) {}
317
318/* Numbering for the SPI-capable controllers when used for SPI:
319 * spi = 1
320 * uwire = 2
321 * mmc1..2 = 3..4
322 * mcbsp1..3 = 5..7
323 */
324
325#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
326
327#define OMAP_UWIRE_BASE 0xfffb3000
328
329static struct resource uwire_resources[] = {
330 {
331 .start = OMAP_UWIRE_BASE,
332 .end = OMAP_UWIRE_BASE + 0x20,
333 .flags = IORESOURCE_MEM,
334 },
335};
336
337static struct platform_device omap_uwire_device = {
338 .name = "omap_uwire",
339 .id = -1,
340 .num_resources = ARRAY_SIZE(uwire_resources),
341 .resource = uwire_resources,
342};
343
344static void omap_init_uwire(void)
345{
346 /* FIXME define and use a boot tag; not all boards will be hooking
347 * up devices to the microwire controller, and multi-board configs
348 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
349 */
350
351 /* board-specific code must configure chipselects (only a few
352 * are normally used) and SCLK/SDI/SDO (each has two choices).
353 */
354 (void) platform_device_register(&omap_uwire_device);
355}
356#else
357static inline void omap_init_uwire(void) {}
358#endif
359
360
361/*
362 * This gets called after board-specific INIT_MACHINE, and initializes most
363 * on-chip peripherals accessible on this board (except for few like USB):
364 *
365 * (a) Does any "standard config" pin muxing needed. Board-specific
366 * code will have muxed GPIO pins and done "nonstandard" setup;
367 * that code could live in the boot loader.
368 * (b) Populating board-specific platform_data with the data drivers
369 * rely on to handle wiring variations.
370 * (c) Creating platform devices as meaningful on this board and
371 * with this kernel configuration.
372 *
373 * Claiming GPIOs, and setting their direction and initial values, is the
374 * responsibility of the device drivers. So is responding to probe().
375 *
376 * Board-specific knowledge like creating devices or pin setup is to be
377 * kept out of drivers as much as possible. In particular, pin setup
378 * may be handled by the boot loader, and drivers should expect it will
379 * normally have been done by the time they're probed.
380 */
381static int __init omap1_init_devices(void)
382{
383 if (!cpu_class_is_omap1())
384 return -ENODEV;
385
386 omap_sram_init();
387 omap1_clk_late_init();
388
389 /* please keep these calls, and their implementations above,
390 * in alphabetical order so they're easier to sort through.
391 */
392
393 omap_init_audio();
394 omap_init_mbox();
395 omap_init_rtc();
396 omap_init_spi100k();
397 omap_init_sti();
398 omap_init_uwire();
399
400 return 0;
401}
402arch_initcall(omap1_init_devices);
403
404#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
405
406static struct resource wdt_resources[] = {
407 {
408 .start = 0xfffeb000,
409 .end = 0xfffeb07F,
410 .flags = IORESOURCE_MEM,
411 },
412};
413
414static struct platform_device omap_wdt_device = {
415 .name = "omap_wdt",
416 .id = -1,
417 .num_resources = ARRAY_SIZE(wdt_resources),
418 .resource = wdt_resources,
419};
420
421static int __init omap_init_wdt(void)
422{
423 if (!cpu_is_omap16xx())
424 return -ENODEV;
425
426 return platform_device_register(&omap_wdt_device);
427}
428subsys_initcall(omap_init_wdt);
429#endif