Linux Audio

Check our new training course

Loading...
v3.15
  1/*
  2 * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
  3 * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
  4 *
  5 * This program is free software; you can redistribute it and/or modify
  6 * it under the terms of the GNU General Public License as published by
  7 * the Free Software Foundation; either version 2 of the License, or
  8 * (at your option) any later version.
  9 *
 10 * This program is distributed in the hope that it will be useful,
 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 13 * GNU General Public License for more details.
 14 *
 15 * You should have received a copy of the GNU General Public License
 16 * along with this program; if not, write to the Free Software
 17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 18 */
 19
 20#include <linux/init.h>
 21#include <linux/types.h>
 22#include <linux/module.h>
 23#include <linux/delay.h>
 24#include <linux/dma-mapping.h>
 25#include <linux/platform_device.h>
 26#include <linux/mtd/physmap.h>
 27#include <linux/serial.h>
 28#include <linux/serial_8250.h>
 29#include <linux/ioport.h>
 30#include <linux/io.h>
 31#include <linux/vlynq.h>
 32#include <linux/leds.h>
 33#include <linux/string.h>
 34#include <linux/etherdevice.h>
 35#include <linux/phy.h>
 36#include <linux/phy_fixed.h>
 37#include <linux/gpio.h>
 38#include <linux/clk.h>
 39
 40#include <asm/addrspace.h>
 41#include <asm/mach-ar7/ar7.h>
 42#include <asm/mach-ar7/gpio.h>
 43#include <asm/mach-ar7/prom.h>
 44
 45/*****************************************************************************
 46 * VLYNQ Bus
 47 ****************************************************************************/
 48struct plat_vlynq_data {
 49	struct plat_vlynq_ops ops;
 50	int gpio_bit;
 51	int reset_bit;
 52};
 53
 54static int vlynq_on(struct vlynq_device *dev)
 55{
 56	int ret;
 57	struct plat_vlynq_data *pdata = dev->dev.platform_data;
 58
 59	ret = gpio_request(pdata->gpio_bit, "vlynq");
 60	if (ret)
 61		goto out;
 62
 63	ar7_device_reset(pdata->reset_bit);
 64
 65	ret = ar7_gpio_disable(pdata->gpio_bit);
 66	if (ret)
 67		goto out_enabled;
 68
 69	ret = ar7_gpio_enable(pdata->gpio_bit);
 70	if (ret)
 71		goto out_enabled;
 72
 73	ret = gpio_direction_output(pdata->gpio_bit, 0);
 74	if (ret)
 75		goto out_gpio_enabled;
 76
 77	msleep(50);
 78
 79	gpio_set_value(pdata->gpio_bit, 1);
 80
 81	msleep(50);
 82
 83	return 0;
 84
 85out_gpio_enabled:
 86	ar7_gpio_disable(pdata->gpio_bit);
 87out_enabled:
 88	ar7_device_disable(pdata->reset_bit);
 89	gpio_free(pdata->gpio_bit);
 90out:
 91	return ret;
 92}
 93
 94static void vlynq_off(struct vlynq_device *dev)
 95{
 96	struct plat_vlynq_data *pdata = dev->dev.platform_data;
 97
 98	ar7_gpio_disable(pdata->gpio_bit);
 99	gpio_free(pdata->gpio_bit);
100	ar7_device_disable(pdata->reset_bit);
101}
102
103static struct resource vlynq_low_res[] = {
104	{
105		.name	= "regs",
106		.flags	= IORESOURCE_MEM,
107		.start	= AR7_REGS_VLYNQ0,
108		.end	= AR7_REGS_VLYNQ0 + 0xff,
109	},
110	{
111		.name	= "irq",
112		.flags	= IORESOURCE_IRQ,
113		.start	= 29,
114		.end	= 29,
115	},
116	{
117		.name	= "mem",
118		.flags	= IORESOURCE_MEM,
119		.start	= 0x04000000,
120		.end	= 0x04ffffff,
121	},
122	{
123		.name	= "devirq",
124		.flags	= IORESOURCE_IRQ,
125		.start	= 80,
126		.end	= 111,
127	},
128};
129
130static struct resource vlynq_high_res[] = {
131	{
132		.name	= "regs",
133		.flags	= IORESOURCE_MEM,
134		.start	= AR7_REGS_VLYNQ1,
135		.end	= AR7_REGS_VLYNQ1 + 0xff,
136	},
137	{
138		.name	= "irq",
139		.flags	= IORESOURCE_IRQ,
140		.start	= 33,
141		.end	= 33,
142	},
143	{
144		.name	= "mem",
145		.flags	= IORESOURCE_MEM,
146		.start	= 0x0c000000,
147		.end	= 0x0cffffff,
148	},
149	{
150		.name	= "devirq",
151		.flags	= IORESOURCE_IRQ,
152		.start	= 112,
153		.end	= 143,
154	},
155};
156
157static struct plat_vlynq_data vlynq_low_data = {
158	.ops = {
159		.on	= vlynq_on,
160		.off	= vlynq_off,
161	},
162	.reset_bit	= 20,
163	.gpio_bit	= 18,
164};
165
166static struct plat_vlynq_data vlynq_high_data = {
167	.ops = {
168		.on	= vlynq_on,
169		.off	= vlynq_off,
170	},
171	.reset_bit	= 16,
172	.gpio_bit	= 19,
173};
174
175static struct platform_device vlynq_low = {
176	.id		= 0,
177	.name		= "vlynq",
178	.dev = {
179		.platform_data	= &vlynq_low_data,
180	},
181	.resource	= vlynq_low_res,
182	.num_resources	= ARRAY_SIZE(vlynq_low_res),
183};
184
185static struct platform_device vlynq_high = {
186	.id		= 1,
187	.name		= "vlynq",
188	.dev = {
189		.platform_data	= &vlynq_high_data,
190	},
191	.resource	= vlynq_high_res,
192	.num_resources	= ARRAY_SIZE(vlynq_high_res),
193};
194
195/*****************************************************************************
196 * Flash
197 ****************************************************************************/
198static struct resource physmap_flash_resource = {
199	.name	= "mem",
200	.flags	= IORESOURCE_MEM,
201	.start	= 0x10000000,
202	.end	= 0x107fffff,
203};
204
205static const char *ar7_probe_types[] = { "ar7part", NULL };
206
207static struct physmap_flash_data physmap_flash_data = {
208	.width	= 2,
209	.part_probe_types = ar7_probe_types,
210};
211
212static struct platform_device physmap_flash = {
213	.name		= "physmap-flash",
214	.dev = {
215		.platform_data	= &physmap_flash_data,
216	},
217	.resource	= &physmap_flash_resource,
218	.num_resources	= 1,
219};
220
221/*****************************************************************************
222 * Ethernet
223 ****************************************************************************/
224static struct resource cpmac_low_res[] = {
225	{
226		.name	= "regs",
227		.flags	= IORESOURCE_MEM,
228		.start	= AR7_REGS_MAC0,
229		.end	= AR7_REGS_MAC0 + 0x7ff,
230	},
231	{
232		.name	= "irq",
233		.flags	= IORESOURCE_IRQ,
234		.start	= 27,
235		.end	= 27,
236	},
237};
238
239static struct resource cpmac_high_res[] = {
240	{
241		.name	= "regs",
242		.flags	= IORESOURCE_MEM,
243		.start	= AR7_REGS_MAC1,
244		.end	= AR7_REGS_MAC1 + 0x7ff,
245	},
246	{
247		.name	= "irq",
248		.flags	= IORESOURCE_IRQ,
249		.start	= 41,
250		.end	= 41,
251	},
252};
253
254static struct fixed_phy_status fixed_phy_status __initdata = {
255	.link		= 1,
256	.speed		= 100,
257	.duplex		= 1,
258};
259
260static struct plat_cpmac_data cpmac_low_data = {
261	.reset_bit	= 17,
262	.power_bit	= 20,
263	.phy_mask	= 0x80000000,
264};
265
266static struct plat_cpmac_data cpmac_high_data = {
267	.reset_bit	= 21,
268	.power_bit	= 22,
269	.phy_mask	= 0x7fffffff,
270};
271
272static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
273
274static struct platform_device cpmac_low = {
275	.id		= 0,
276	.name		= "cpmac",
277	.dev = {
278		.dma_mask		= &cpmac_dma_mask,
279		.coherent_dma_mask	= DMA_BIT_MASK(32),
280		.platform_data		= &cpmac_low_data,
281	},
282	.resource	= cpmac_low_res,
283	.num_resources	= ARRAY_SIZE(cpmac_low_res),
284};
285
286static struct platform_device cpmac_high = {
287	.id		= 1,
288	.name		= "cpmac",
289	.dev = {
290		.dma_mask		= &cpmac_dma_mask,
291		.coherent_dma_mask	= DMA_BIT_MASK(32),
292		.platform_data		= &cpmac_high_data,
293	},
294	.resource	= cpmac_high_res,
295	.num_resources	= ARRAY_SIZE(cpmac_high_res),
296};
297
298static void __init cpmac_get_mac(int instance, unsigned char *dev_addr)
299{
300	char name[5], *mac;
301
302	sprintf(name, "mac%c", 'a' + instance);
303	mac = prom_getenv(name);
304	if (!mac && instance) {
305		sprintf(name, "mac%c", 'a');
306		mac = prom_getenv(name);
307	}
308
309	if (mac) {
310		if (sscanf(mac, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
311					&dev_addr[0], &dev_addr[1],
312					&dev_addr[2], &dev_addr[3],
313					&dev_addr[4], &dev_addr[5]) != 6) {
314			pr_warning("cannot parse mac address, "
315					"using random address\n");
316			eth_random_addr(dev_addr);
317		}
318	} else
319		eth_random_addr(dev_addr);
320}
321
322/*****************************************************************************
323 * USB
324 ****************************************************************************/
325static struct resource usb_res[] = {
326	{
327		.name	= "regs",
328		.flags	= IORESOURCE_MEM,
329		.start	= AR7_REGS_USB,
330		.end	= AR7_REGS_USB + 0xff,
331	},
332	{
333		.name	= "irq",
334		.flags	= IORESOURCE_IRQ,
335		.start	= 32,
336		.end	= 32,
337	},
338	{
339		.name	= "mem",
340		.flags	= IORESOURCE_MEM,
341		.start	= 0x03400000,
342		.end	= 0x03401fff,
343	},
344};
345
346static struct platform_device ar7_udc = {
347	.name		= "ar7_udc",
348	.resource	= usb_res,
349	.num_resources	= ARRAY_SIZE(usb_res),
350};
351
352/*****************************************************************************
353 * LEDs
354 ****************************************************************************/
355static struct gpio_led default_leds[] = {
356	{
357		.name			= "status",
358		.gpio			= 8,
359		.active_low		= 1,
360	},
361};
362
363static struct gpio_led titan_leds[] = {
364	{ .name = "status", .gpio = 8, .active_low = 1, },
365	{ .name = "wifi", .gpio = 13, .active_low = 1, },
366};
367
368static struct gpio_led dsl502t_leds[] = {
369	{
370		.name			= "status",
371		.gpio			= 9,
372		.active_low		= 1,
373	},
374	{
375		.name			= "ethernet",
376		.gpio			= 7,
377		.active_low		= 1,
378	},
379	{
380		.name			= "usb",
381		.gpio			= 12,
382		.active_low		= 1,
383	},
384};
385
386static struct gpio_led dg834g_leds[] = {
387	{
388		.name			= "ppp",
389		.gpio			= 6,
390		.active_low		= 1,
391	},
392	{
393		.name			= "status",
394		.gpio			= 7,
395		.active_low		= 1,
396	},
397	{
398		.name			= "adsl",
399		.gpio			= 8,
400		.active_low		= 1,
401	},
402	{
403		.name			= "wifi",
404		.gpio			= 12,
405		.active_low		= 1,
406	},
407	{
408		.name			= "power",
409		.gpio			= 14,
410		.active_low		= 1,
411		.default_trigger	= "default-on",
412	},
413};
414
415static struct gpio_led fb_sl_leds[] = {
416	{
417		.name			= "1",
418		.gpio			= 7,
419	},
420	{
421		.name			= "2",
422		.gpio			= 13,
423		.active_low		= 1,
424	},
425	{
426		.name			= "3",
427		.gpio			= 10,
428		.active_low		= 1,
429	},
430	{
431		.name			= "4",
432		.gpio			= 12,
433		.active_low		= 1,
434	},
435	{
436		.name			= "5",
437		.gpio			= 9,
438		.active_low		= 1,
439	},
440};
441
442static struct gpio_led fb_fon_leds[] = {
443	{
444		.name			= "1",
445		.gpio			= 8,
446	},
447	{
448		.name			= "2",
449		.gpio			= 3,
450		.active_low		= 1,
451	},
452	{
453		.name			= "3",
454		.gpio			= 5,
455	},
456	{
457		.name			= "4",
458		.gpio			= 4,
459		.active_low		= 1,
460	},
461	{
462		.name			= "5",
463		.gpio			= 11,
464		.active_low		= 1,
465	},
466};
467
468static struct gpio_led gt701_leds[] = {
469	{
470		.name			= "inet:green",
471		.gpio			= 13,
472		.active_low		= 1,
473	},
474	{
475		.name			= "usb",
476		.gpio			= 12,
477		.active_low		= 1,
478	},
479	{
480		.name			= "inet:red",
481		.gpio			= 9,
482		.active_low		= 1,
483	},
484	{
485		.name			= "power:red",
486		.gpio			= 7,
487		.active_low		= 1,
488	},
489	{
490		.name			= "power:green",
491		.gpio			= 8,
492		.active_low		= 1,
493		.default_trigger	= "default-on",
494	},
495	{
496		.name			= "ethernet",
497		.gpio			= 10,
498		.active_low		= 1,
499	},
500};
501
502static struct gpio_led_platform_data ar7_led_data;
503
504static struct platform_device ar7_gpio_leds = {
505	.name = "leds-gpio",
506	.dev = {
507		.platform_data = &ar7_led_data,
508	}
509};
510
511static void __init detect_leds(void)
512{
513	char *prid, *usb_prod;
514
515	/* Default LEDs */
516	ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
517	ar7_led_data.leds = default_leds;
518
519	/* FIXME: the whole thing is unreliable */
520	prid = prom_getenv("ProductID");
521	usb_prod = prom_getenv("usb_prod");
522
523	/* If we can't get the product id from PROM, use the default LEDs */
524	if (!prid)
525		return;
526
527	if (strstr(prid, "Fritz_Box_FON")) {
528		ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
529		ar7_led_data.leds = fb_fon_leds;
530	} else if (strstr(prid, "Fritz_Box_")) {
531		ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
532		ar7_led_data.leds = fb_sl_leds;
533	} else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
534		&& usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
535		ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
536		ar7_led_data.leds = dsl502t_leds;
537	} else if (strstr(prid, "DG834")) {
538		ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
539		ar7_led_data.leds = dg834g_leds;
540	} else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
541		ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
542		ar7_led_data.leds = titan_leds;
543	} else if (strstr(prid, "GT701")) {
544		ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
545		ar7_led_data.leds = gt701_leds;
546	}
547}
548
549/*****************************************************************************
550 * Watchdog
551 ****************************************************************************/
552static struct resource ar7_wdt_res = {
553	.name		= "regs",
554	.flags		= IORESOURCE_MEM,
555	.start		= -1,	/* Filled at runtime */
556	.end		= -1,	/* Filled at runtime */
557};
558
559static struct platform_device ar7_wdt = {
560	.name		= "ar7_wdt",
561	.resource	= &ar7_wdt_res,
562	.num_resources	= 1,
563};
564
565/*****************************************************************************
566 * Init
567 ****************************************************************************/
568static int __init ar7_register_uarts(void)
569{
570#ifdef CONFIG_SERIAL_8250
571	static struct uart_port uart_port __initdata;
572	struct clk *bus_clk;
573	int res;
574
575	memset(&uart_port, 0, sizeof(struct uart_port));
576
577	bus_clk = clk_get(NULL, "bus");
578	if (IS_ERR(bus_clk))
579		panic("unable to get bus clk");
580
581	uart_port.type		= PORT_AR7;
582	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
583	uart_port.iotype	= UPIO_MEM32;
584	uart_port.regshift	= 2;
585
586	uart_port.line		= 0;
587	uart_port.irq		= AR7_IRQ_UART0;
588	uart_port.mapbase	= AR7_REGS_UART0;
589	uart_port.membase	= ioremap(uart_port.mapbase, 256);
590
591	res = early_serial_setup(&uart_port);
592	if (res)
593		return res;
594
595	/* Only TNETD73xx have a second serial port */
596	if (ar7_has_second_uart()) {
597		uart_port.line		= 1;
598		uart_port.irq		= AR7_IRQ_UART1;
599		uart_port.mapbase	= UR8_REGS_UART1;
600		uart_port.membase	= ioremap(uart_port.mapbase, 256);
601
602		res = early_serial_setup(&uart_port);
603		if (res)
604			return res;
605	}
606#endif
607
608	return 0;
609}
610
611static void __init titan_fixup_devices(void)
612{
613	/* Set vlynq0 data */
614	vlynq_low_data.reset_bit = 15;
615	vlynq_low_data.gpio_bit = 14;
616
617	/* Set vlynq1 data */
618	vlynq_high_data.reset_bit = 16;
619	vlynq_high_data.gpio_bit = 7;
620
621	/* Set vlynq0 resources */
622	vlynq_low_res[0].start = TITAN_REGS_VLYNQ0;
623	vlynq_low_res[0].end = TITAN_REGS_VLYNQ0 + 0xff;
624	vlynq_low_res[1].start = 33;
625	vlynq_low_res[1].end = 33;
626	vlynq_low_res[2].start = 0x0c000000;
627	vlynq_low_res[2].end = 0x0fffffff;
628	vlynq_low_res[3].start = 80;
629	vlynq_low_res[3].end = 111;
630
631	/* Set vlynq1 resources */
632	vlynq_high_res[0].start = TITAN_REGS_VLYNQ1;
633	vlynq_high_res[0].end = TITAN_REGS_VLYNQ1 + 0xff;
634	vlynq_high_res[1].start = 34;
635	vlynq_high_res[1].end = 34;
636	vlynq_high_res[2].start = 0x40000000;
637	vlynq_high_res[2].end = 0x43ffffff;
638	vlynq_high_res[3].start = 112;
639	vlynq_high_res[3].end = 143;
640
641	/* Set cpmac0 data */
642	cpmac_low_data.phy_mask = 0x40000000;
643
644	/* Set cpmac1 data */
645	cpmac_high_data.phy_mask = 0x80000000;
646
647	/* Set cpmac0 resources */
648	cpmac_low_res[0].start = TITAN_REGS_MAC0;
649	cpmac_low_res[0].end = TITAN_REGS_MAC0 + 0x7ff;
650
651	/* Set cpmac1 resources */
652	cpmac_high_res[0].start = TITAN_REGS_MAC1;
653	cpmac_high_res[0].end = TITAN_REGS_MAC1 + 0x7ff;
654}
655
656static int __init ar7_register_devices(void)
657{
658	void __iomem *bootcr;
659	u32 val;
660	int res;
661
662	res = ar7_register_uarts();
663	if (res)
664		pr_err("unable to setup uart(s): %d\n", res);
665
666	res = platform_device_register(&physmap_flash);
667	if (res)
668		pr_warning("unable to register physmap-flash: %d\n", res);
669
670	if (ar7_is_titan())
671		titan_fixup_devices();
672
673	ar7_device_disable(vlynq_low_data.reset_bit);
674	res = platform_device_register(&vlynq_low);
675	if (res)
676		pr_warning("unable to register vlynq-low: %d\n", res);
677
678	if (ar7_has_high_vlynq()) {
679		ar7_device_disable(vlynq_high_data.reset_bit);
680		res = platform_device_register(&vlynq_high);
681		if (res)
682			pr_warning("unable to register vlynq-high: %d\n", res);
683	}
684
685	if (ar7_has_high_cpmac()) {
686		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
687		if (!res) {
688			cpmac_get_mac(1, cpmac_high_data.dev_addr);
689
690			res = platform_device_register(&cpmac_high);
691			if (res)
692				pr_warning("unable to register cpmac-high: %d\n", res);
693		} else
694			pr_warning("unable to add cpmac-high phy: %d\n", res);
695	} else
696		cpmac_low_data.phy_mask = 0xffffffff;
697
698	res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
699	if (!res) {
700		cpmac_get_mac(0, cpmac_low_data.dev_addr);
701		res = platform_device_register(&cpmac_low);
702		if (res)
703			pr_warning("unable to register cpmac-low: %d\n", res);
704	} else
705		pr_warning("unable to add cpmac-low phy: %d\n", res);
706
707	detect_leds();
708	res = platform_device_register(&ar7_gpio_leds);
709	if (res)
710		pr_warning("unable to register leds: %d\n", res);
711
712	res = platform_device_register(&ar7_udc);
713	if (res)
714		pr_warning("unable to register usb slave: %d\n", res);
715
716	/* Register watchdog only if enabled in hardware */
717	bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
718	val = readl(bootcr);
719	iounmap(bootcr);
720	if (val & AR7_WDT_HW_ENA) {
721		if (ar7_has_high_vlynq())
722			ar7_wdt_res.start = UR8_REGS_WDT;
723		else
724			ar7_wdt_res.start = AR7_REGS_WDT;
725
726		ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
727		res = platform_device_register(&ar7_wdt);
728		if (res)
729			pr_warning("unable to register watchdog: %d\n", res);
730	}
731
732	return 0;
733}
734device_initcall(ar7_register_devices);
v3.5.6
  1/*
  2 * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
  3 * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
  4 *
  5 * This program is free software; you can redistribute it and/or modify
  6 * it under the terms of the GNU General Public License as published by
  7 * the Free Software Foundation; either version 2 of the License, or
  8 * (at your option) any later version.
  9 *
 10 * This program is distributed in the hope that it will be useful,
 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 13 * GNU General Public License for more details.
 14 *
 15 * You should have received a copy of the GNU General Public License
 16 * along with this program; if not, write to the Free Software
 17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 18 */
 19
 20#include <linux/init.h>
 21#include <linux/types.h>
 22#include <linux/module.h>
 23#include <linux/delay.h>
 24#include <linux/dma-mapping.h>
 25#include <linux/platform_device.h>
 26#include <linux/mtd/physmap.h>
 27#include <linux/serial.h>
 28#include <linux/serial_8250.h>
 29#include <linux/ioport.h>
 30#include <linux/io.h>
 31#include <linux/vlynq.h>
 32#include <linux/leds.h>
 33#include <linux/string.h>
 34#include <linux/etherdevice.h>
 35#include <linux/phy.h>
 36#include <linux/phy_fixed.h>
 37#include <linux/gpio.h>
 38#include <linux/clk.h>
 39
 40#include <asm/addrspace.h>
 41#include <asm/mach-ar7/ar7.h>
 42#include <asm/mach-ar7/gpio.h>
 43#include <asm/mach-ar7/prom.h>
 44
 45/*****************************************************************************
 46 * VLYNQ Bus
 47 ****************************************************************************/
 48struct plat_vlynq_data {
 49	struct plat_vlynq_ops ops;
 50	int gpio_bit;
 51	int reset_bit;
 52};
 53
 54static int vlynq_on(struct vlynq_device *dev)
 55{
 56	int ret;
 57	struct plat_vlynq_data *pdata = dev->dev.platform_data;
 58
 59	ret = gpio_request(pdata->gpio_bit, "vlynq");
 60	if (ret)
 61		goto out;
 62
 63	ar7_device_reset(pdata->reset_bit);
 64
 65	ret = ar7_gpio_disable(pdata->gpio_bit);
 66	if (ret)
 67		goto out_enabled;
 68
 69	ret = ar7_gpio_enable(pdata->gpio_bit);
 70	if (ret)
 71		goto out_enabled;
 72
 73	ret = gpio_direction_output(pdata->gpio_bit, 0);
 74	if (ret)
 75		goto out_gpio_enabled;
 76
 77	msleep(50);
 78
 79	gpio_set_value(pdata->gpio_bit, 1);
 80
 81	msleep(50);
 82
 83	return 0;
 84
 85out_gpio_enabled:
 86	ar7_gpio_disable(pdata->gpio_bit);
 87out_enabled:
 88	ar7_device_disable(pdata->reset_bit);
 89	gpio_free(pdata->gpio_bit);
 90out:
 91	return ret;
 92}
 93
 94static void vlynq_off(struct vlynq_device *dev)
 95{
 96	struct plat_vlynq_data *pdata = dev->dev.platform_data;
 97
 98	ar7_gpio_disable(pdata->gpio_bit);
 99	gpio_free(pdata->gpio_bit);
100	ar7_device_disable(pdata->reset_bit);
101}
102
103static struct resource vlynq_low_res[] = {
104	{
105		.name	= "regs",
106		.flags	= IORESOURCE_MEM,
107		.start	= AR7_REGS_VLYNQ0,
108		.end	= AR7_REGS_VLYNQ0 + 0xff,
109	},
110	{
111		.name	= "irq",
112		.flags	= IORESOURCE_IRQ,
113		.start	= 29,
114		.end	= 29,
115	},
116	{
117		.name	= "mem",
118		.flags	= IORESOURCE_MEM,
119		.start	= 0x04000000,
120		.end	= 0x04ffffff,
121	},
122	{
123		.name	= "devirq",
124		.flags	= IORESOURCE_IRQ,
125		.start	= 80,
126		.end	= 111,
127	},
128};
129
130static struct resource vlynq_high_res[] = {
131	{
132		.name	= "regs",
133		.flags	= IORESOURCE_MEM,
134		.start	= AR7_REGS_VLYNQ1,
135		.end	= AR7_REGS_VLYNQ1 + 0xff,
136	},
137	{
138		.name	= "irq",
139		.flags	= IORESOURCE_IRQ,
140		.start	= 33,
141		.end	= 33,
142	},
143	{
144		.name	= "mem",
145		.flags	= IORESOURCE_MEM,
146		.start	= 0x0c000000,
147		.end	= 0x0cffffff,
148	},
149	{
150		.name	= "devirq",
151		.flags	= IORESOURCE_IRQ,
152		.start	= 112,
153		.end	= 143,
154	},
155};
156
157static struct plat_vlynq_data vlynq_low_data = {
158	.ops = {
159		.on	= vlynq_on,
160		.off	= vlynq_off,
161	},
162	.reset_bit	= 20,
163	.gpio_bit	= 18,
164};
165
166static struct plat_vlynq_data vlynq_high_data = {
167	.ops = {
168		.on	= vlynq_on,
169		.off	= vlynq_off,
170	},
171	.reset_bit	= 16,
172	.gpio_bit	= 19,
173};
174
175static struct platform_device vlynq_low = {
176	.id		= 0,
177	.name		= "vlynq",
178	.dev = {
179		.platform_data	= &vlynq_low_data,
180	},
181	.resource	= vlynq_low_res,
182	.num_resources	= ARRAY_SIZE(vlynq_low_res),
183};
184
185static struct platform_device vlynq_high = {
186	.id		= 1,
187	.name		= "vlynq",
188	.dev = {
189		.platform_data	= &vlynq_high_data,
190	},
191	.resource	= vlynq_high_res,
192	.num_resources	= ARRAY_SIZE(vlynq_high_res),
193};
194
195/*****************************************************************************
196 * Flash
197 ****************************************************************************/
198static struct resource physmap_flash_resource = {
199	.name	= "mem",
200	.flags	= IORESOURCE_MEM,
201	.start	= 0x10000000,
202	.end	= 0x107fffff,
203};
204
 
 
205static struct physmap_flash_data physmap_flash_data = {
206	.width	= 2,
 
207};
208
209static struct platform_device physmap_flash = {
210	.name		= "physmap-flash",
211	.dev = {
212		.platform_data	= &physmap_flash_data,
213	},
214	.resource	= &physmap_flash_resource,
215	.num_resources	= 1,
216};
217
218/*****************************************************************************
219 * Ethernet
220 ****************************************************************************/
221static struct resource cpmac_low_res[] = {
222	{
223		.name	= "regs",
224		.flags	= IORESOURCE_MEM,
225		.start	= AR7_REGS_MAC0,
226		.end	= AR7_REGS_MAC0 + 0x7ff,
227	},
228	{
229		.name	= "irq",
230		.flags	= IORESOURCE_IRQ,
231		.start	= 27,
232		.end	= 27,
233	},
234};
235
236static struct resource cpmac_high_res[] = {
237	{
238		.name	= "regs",
239		.flags	= IORESOURCE_MEM,
240		.start	= AR7_REGS_MAC1,
241		.end	= AR7_REGS_MAC1 + 0x7ff,
242	},
243	{
244		.name	= "irq",
245		.flags	= IORESOURCE_IRQ,
246		.start	= 41,
247		.end	= 41,
248	},
249};
250
251static struct fixed_phy_status fixed_phy_status __initdata = {
252	.link		= 1,
253	.speed		= 100,
254	.duplex		= 1,
255};
256
257static struct plat_cpmac_data cpmac_low_data = {
258	.reset_bit	= 17,
259	.power_bit	= 20,
260	.phy_mask	= 0x80000000,
261};
262
263static struct plat_cpmac_data cpmac_high_data = {
264	.reset_bit	= 21,
265	.power_bit	= 22,
266	.phy_mask	= 0x7fffffff,
267};
268
269static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
270
271static struct platform_device cpmac_low = {
272	.id		= 0,
273	.name		= "cpmac",
274	.dev = {
275		.dma_mask		= &cpmac_dma_mask,
276		.coherent_dma_mask	= DMA_BIT_MASK(32),
277		.platform_data		= &cpmac_low_data,
278	},
279	.resource	= cpmac_low_res,
280	.num_resources	= ARRAY_SIZE(cpmac_low_res),
281};
282
283static struct platform_device cpmac_high = {
284	.id		= 1,
285	.name		= "cpmac",
286	.dev = {
287		.dma_mask		= &cpmac_dma_mask,
288		.coherent_dma_mask	= DMA_BIT_MASK(32),
289		.platform_data		= &cpmac_high_data,
290	},
291	.resource	= cpmac_high_res,
292	.num_resources	= ARRAY_SIZE(cpmac_high_res),
293};
294
295static void __init cpmac_get_mac(int instance, unsigned char *dev_addr)
296{
297	char name[5], *mac;
298
299	sprintf(name, "mac%c", 'a' + instance);
300	mac = prom_getenv(name);
301	if (!mac && instance) {
302		sprintf(name, "mac%c", 'a');
303		mac = prom_getenv(name);
304	}
305
306	if (mac) {
307		if (sscanf(mac, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
308					&dev_addr[0], &dev_addr[1],
309					&dev_addr[2], &dev_addr[3],
310					&dev_addr[4], &dev_addr[5]) != 6) {
311			pr_warning("cannot parse mac address, "
312					"using random address\n");
313			random_ether_addr(dev_addr);
314		}
315	} else
316		random_ether_addr(dev_addr);
317}
318
319/*****************************************************************************
320 * USB
321 ****************************************************************************/
322static struct resource usb_res[] = {
323	{
324		.name	= "regs",
325		.flags	= IORESOURCE_MEM,
326		.start	= AR7_REGS_USB,
327		.end	= AR7_REGS_USB + 0xff,
328	},
329	{
330		.name	= "irq",
331		.flags	= IORESOURCE_IRQ,
332		.start	= 32,
333		.end	= 32,
334	},
335	{
336		.name	= "mem",
337		.flags	= IORESOURCE_MEM,
338		.start	= 0x03400000,
339		.end	= 0x03401fff,
340	},
341};
342
343static struct platform_device ar7_udc = {
344	.name		= "ar7_udc",
345	.resource	= usb_res,
346	.num_resources	= ARRAY_SIZE(usb_res),
347};
348
349/*****************************************************************************
350 * LEDs
351 ****************************************************************************/
352static struct gpio_led default_leds[] = {
353	{
354		.name			= "status",
355		.gpio			= 8,
356		.active_low		= 1,
357	},
358};
359
360static struct gpio_led titan_leds[] = {
361	{ .name = "status", .gpio = 8, .active_low = 1, },
362	{ .name = "wifi", .gpio = 13, .active_low = 1, },
363};
364
365static struct gpio_led dsl502t_leds[] = {
366	{
367		.name			= "status",
368		.gpio			= 9,
369		.active_low		= 1,
370	},
371	{
372		.name			= "ethernet",
373		.gpio			= 7,
374		.active_low		= 1,
375	},
376	{
377		.name			= "usb",
378		.gpio			= 12,
379		.active_low		= 1,
380	},
381};
382
383static struct gpio_led dg834g_leds[] = {
384	{
385		.name			= "ppp",
386		.gpio			= 6,
387		.active_low		= 1,
388	},
389	{
390		.name			= "status",
391		.gpio			= 7,
392		.active_low		= 1,
393	},
394	{
395		.name			= "adsl",
396		.gpio			= 8,
397		.active_low		= 1,
398	},
399	{
400		.name			= "wifi",
401		.gpio			= 12,
402		.active_low		= 1,
403	},
404	{
405		.name			= "power",
406		.gpio			= 14,
407		.active_low		= 1,
408		.default_trigger	= "default-on",
409	},
410};
411
412static struct gpio_led fb_sl_leds[] = {
413	{
414		.name			= "1",
415		.gpio			= 7,
416	},
417	{
418		.name			= "2",
419		.gpio			= 13,
420		.active_low		= 1,
421	},
422	{
423		.name			= "3",
424		.gpio			= 10,
425		.active_low		= 1,
426	},
427	{
428		.name			= "4",
429		.gpio			= 12,
430		.active_low		= 1,
431	},
432	{
433		.name			= "5",
434		.gpio			= 9,
435		.active_low		= 1,
436	},
437};
438
439static struct gpio_led fb_fon_leds[] = {
440	{
441		.name			= "1",
442		.gpio			= 8,
443	},
444	{
445		.name			= "2",
446		.gpio			= 3,
447		.active_low		= 1,
448	},
449	{
450		.name			= "3",
451		.gpio			= 5,
452	},
453	{
454		.name			= "4",
455		.gpio			= 4,
456		.active_low		= 1,
457	},
458	{
459		.name			= "5",
460		.gpio			= 11,
461		.active_low		= 1,
462	},
463};
464
465static struct gpio_led gt701_leds[] = {
466	{
467		.name			= "inet:green",
468		.gpio			= 13,
469		.active_low		= 1,
470	},
471	{
472		.name			= "usb",
473		.gpio			= 12,
474		.active_low		= 1,
475	},
476	{
477		.name			= "inet:red",
478		.gpio			= 9,
479		.active_low		= 1,
480	},
481	{
482		.name			= "power:red",
483		.gpio			= 7,
484		.active_low		= 1,
485	},
486	{
487		.name			= "power:green",
488		.gpio			= 8,
489		.active_low		= 1,
490		.default_trigger	= "default-on",
491	},
492        {
493                .name                   = "ethernet",
494                .gpio                   = 10,
495                .active_low             = 1,
496        },
497};
498
499static struct gpio_led_platform_data ar7_led_data;
500
501static struct platform_device ar7_gpio_leds = {
502	.name = "leds-gpio",
503	.dev = {
504		.platform_data = &ar7_led_data,
505	}
506};
507
508static void __init detect_leds(void)
509{
510	char *prid, *usb_prod;
511
512	/* Default LEDs	*/
513	ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
514	ar7_led_data.leds = default_leds;
515
516	/* FIXME: the whole thing is unreliable */
517	prid = prom_getenv("ProductID");
518	usb_prod = prom_getenv("usb_prod");
519
520	/* If we can't get the product id from PROM, use the default LEDs */
521	if (!prid)
522		return;
523
524	if (strstr(prid, "Fritz_Box_FON")) {
525		ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
526		ar7_led_data.leds = fb_fon_leds;
527	} else if (strstr(prid, "Fritz_Box_")) {
528		ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
529		ar7_led_data.leds = fb_sl_leds;
530	} else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
531		&& usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
532		ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
533		ar7_led_data.leds = dsl502t_leds;
534	} else if (strstr(prid, "DG834")) {
535		ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
536		ar7_led_data.leds = dg834g_leds;
537	} else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
538		ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
539		ar7_led_data.leds = titan_leds;
540	} else if (strstr(prid, "GT701")) {
541		ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
542		ar7_led_data.leds = gt701_leds;
543	}
544}
545
546/*****************************************************************************
547 * Watchdog
548 ****************************************************************************/
549static struct resource ar7_wdt_res = {
550	.name		= "regs",
551	.flags		= IORESOURCE_MEM,
552	.start		= -1,	/* Filled at runtime */
553	.end		= -1,	/* Filled at runtime */
554};
555
556static struct platform_device ar7_wdt = {
557	.name		= "ar7_wdt",
558	.resource	= &ar7_wdt_res,
559	.num_resources	= 1,
560};
561
562/*****************************************************************************
563 * Init
564 ****************************************************************************/
565static int __init ar7_register_uarts(void)
566{
567#ifdef CONFIG_SERIAL_8250
568	static struct uart_port uart_port __initdata;
569	struct clk *bus_clk;
570	int res;
571
572	memset(&uart_port, 0, sizeof(struct uart_port));
573
574	bus_clk = clk_get(NULL, "bus");
575	if (IS_ERR(bus_clk))
576		panic("unable to get bus clk");
577
578	uart_port.type		= PORT_AR7;
579	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
580	uart_port.iotype	= UPIO_MEM32;
581	uart_port.regshift	= 2;
582
583	uart_port.line		= 0;
584	uart_port.irq		= AR7_IRQ_UART0;
585	uart_port.mapbase	= AR7_REGS_UART0;
586	uart_port.membase	= ioremap(uart_port.mapbase, 256);
587
588	res = early_serial_setup(&uart_port);
589	if (res)
590		return res;
591
592	/* Only TNETD73xx have a second serial port */
593	if (ar7_has_second_uart()) {
594		uart_port.line		= 1;
595		uart_port.irq		= AR7_IRQ_UART1;
596		uart_port.mapbase	= UR8_REGS_UART1;
597		uart_port.membase	= ioremap(uart_port.mapbase, 256);
598
599		res = early_serial_setup(&uart_port);
600		if (res)
601			return res;
602	}
603#endif
604
605	return 0;
606}
607
608static void __init titan_fixup_devices(void)
609{
610	/* Set vlynq0 data */
611	vlynq_low_data.reset_bit = 15;
612	vlynq_low_data.gpio_bit = 14;
613
614	/* Set vlynq1 data */
615	vlynq_high_data.reset_bit = 16;
616	vlynq_high_data.gpio_bit = 7;
617
618	/* Set vlynq0 resources */
619	vlynq_low_res[0].start = TITAN_REGS_VLYNQ0;
620	vlynq_low_res[0].end = TITAN_REGS_VLYNQ0 + 0xff;
621	vlynq_low_res[1].start = 33;
622	vlynq_low_res[1].end = 33;
623	vlynq_low_res[2].start = 0x0c000000;
624	vlynq_low_res[2].end = 0x0fffffff;
625	vlynq_low_res[3].start = 80;
626	vlynq_low_res[3].end = 111;
627
628	/* Set vlynq1 resources */
629	vlynq_high_res[0].start = TITAN_REGS_VLYNQ1;
630	vlynq_high_res[0].end = TITAN_REGS_VLYNQ1 + 0xff;
631	vlynq_high_res[1].start = 34;
632	vlynq_high_res[1].end = 34;
633	vlynq_high_res[2].start = 0x40000000;
634	vlynq_high_res[2].end = 0x43ffffff;
635	vlynq_high_res[3].start = 112;
636	vlynq_high_res[3].end = 143;
637
638	/* Set cpmac0 data */
639	cpmac_low_data.phy_mask = 0x40000000;
640
641	/* Set cpmac1 data */
642	cpmac_high_data.phy_mask = 0x80000000;
643
644	/* Set cpmac0 resources */
645	cpmac_low_res[0].start = TITAN_REGS_MAC0;
646	cpmac_low_res[0].end = TITAN_REGS_MAC0 + 0x7ff;
647
648	/* Set cpmac1 resources */
649	cpmac_high_res[0].start = TITAN_REGS_MAC1;
650	cpmac_high_res[0].end = TITAN_REGS_MAC1 + 0x7ff;
651}
652
653static int __init ar7_register_devices(void)
654{
655	void __iomem *bootcr;
656	u32 val;
657	int res;
658
659	res = ar7_register_uarts();
660	if (res)
661		pr_err("unable to setup uart(s): %d\n", res);
662
663	res = platform_device_register(&physmap_flash);
664	if (res)
665		pr_warning("unable to register physmap-flash: %d\n", res);
666
667	if (ar7_is_titan())
668		titan_fixup_devices();
669
670	ar7_device_disable(vlynq_low_data.reset_bit);
671	res = platform_device_register(&vlynq_low);
672	if (res)
673		pr_warning("unable to register vlynq-low: %d\n", res);
674
675	if (ar7_has_high_vlynq()) {
676		ar7_device_disable(vlynq_high_data.reset_bit);
677		res = platform_device_register(&vlynq_high);
678		if (res)
679			pr_warning("unable to register vlynq-high: %d\n", res);
680	}
681
682	if (ar7_has_high_cpmac()) {
683		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
684		if (!res) {
685			cpmac_get_mac(1, cpmac_high_data.dev_addr);
686
687			res = platform_device_register(&cpmac_high);
688			if (res)
689				pr_warning("unable to register cpmac-high: %d\n", res);
690		} else
691			pr_warning("unable to add cpmac-high phy: %d\n", res);
692	} else
693		cpmac_low_data.phy_mask = 0xffffffff;
694
695	res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
696	if (!res) {
697		cpmac_get_mac(0, cpmac_low_data.dev_addr);
698		res = platform_device_register(&cpmac_low);
699		if (res)
700			pr_warning("unable to register cpmac-low: %d\n", res);
701	} else
702		pr_warning("unable to add cpmac-low phy: %d\n", res);
703
704	detect_leds();
705	res = platform_device_register(&ar7_gpio_leds);
706	if (res)
707		pr_warning("unable to register leds: %d\n", res);
708
709	res = platform_device_register(&ar7_udc);
710	if (res)
711		pr_warning("unable to register usb slave: %d\n", res);
712
713	/* Register watchdog only if enabled in hardware */
714	bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
715	val = readl(bootcr);
716	iounmap(bootcr);
717	if (val & AR7_WDT_HW_ENA) {
718		if (ar7_has_high_vlynq())
719			ar7_wdt_res.start = UR8_REGS_WDT;
720		else
721			ar7_wdt_res.start = AR7_REGS_WDT;
722
723		ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
724		res = platform_device_register(&ar7_wdt);
725		if (res)
726			pr_warning("unable to register watchdog: %d\n", res);
727	}
728
729	return 0;
730}
731device_initcall(ar7_register_devices);