Loading...
1/*
2 * linux/kernel/hrtimer.c
3 *
4 * Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de>
5 * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar
6 * Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner
7 *
8 * High-resolution kernel timers
9 *
10 * In contrast to the low-resolution timeout API implemented in
11 * kernel/timer.c, hrtimers provide finer resolution and accuracy
12 * depending on system configuration and capabilities.
13 *
14 * These timers are currently used for:
15 * - itimers
16 * - POSIX timers
17 * - nanosleep
18 * - precise in-kernel timing
19 *
20 * Started by: Thomas Gleixner and Ingo Molnar
21 *
22 * Credits:
23 * based on kernel/timer.c
24 *
25 * Help, testing, suggestions, bugfixes, improvements were
26 * provided by:
27 *
28 * George Anzinger, Andrew Morton, Steven Rostedt, Roman Zippel
29 * et. al.
30 *
31 * For licencing details see kernel-base/COPYING
32 */
33
34#include <linux/cpu.h>
35#include <linux/export.h>
36#include <linux/percpu.h>
37#include <linux/hrtimer.h>
38#include <linux/notifier.h>
39#include <linux/syscalls.h>
40#include <linux/kallsyms.h>
41#include <linux/interrupt.h>
42#include <linux/tick.h>
43#include <linux/seq_file.h>
44#include <linux/err.h>
45#include <linux/debugobjects.h>
46#include <linux/sched.h>
47#include <linux/sched/sysctl.h>
48#include <linux/sched/rt.h>
49#include <linux/sched/deadline.h>
50#include <linux/timer.h>
51#include <linux/freezer.h>
52
53#include <asm/uaccess.h>
54
55#include <trace/events/timer.h>
56
57/*
58 * The timer bases:
59 *
60 * There are more clockids then hrtimer bases. Thus, we index
61 * into the timer bases by the hrtimer_base_type enum. When trying
62 * to reach a base using a clockid, hrtimer_clockid_to_base()
63 * is used to convert from clockid to the proper hrtimer_base_type.
64 */
65DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
66{
67
68 .lock = __RAW_SPIN_LOCK_UNLOCKED(hrtimer_bases.lock),
69 .clock_base =
70 {
71 {
72 .index = HRTIMER_BASE_MONOTONIC,
73 .clockid = CLOCK_MONOTONIC,
74 .get_time = &ktime_get,
75 .resolution = KTIME_LOW_RES,
76 },
77 {
78 .index = HRTIMER_BASE_REALTIME,
79 .clockid = CLOCK_REALTIME,
80 .get_time = &ktime_get_real,
81 .resolution = KTIME_LOW_RES,
82 },
83 {
84 .index = HRTIMER_BASE_BOOTTIME,
85 .clockid = CLOCK_BOOTTIME,
86 .get_time = &ktime_get_boottime,
87 .resolution = KTIME_LOW_RES,
88 },
89 {
90 .index = HRTIMER_BASE_TAI,
91 .clockid = CLOCK_TAI,
92 .get_time = &ktime_get_clocktai,
93 .resolution = KTIME_LOW_RES,
94 },
95 }
96};
97
98static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
99 [CLOCK_REALTIME] = HRTIMER_BASE_REALTIME,
100 [CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC,
101 [CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME,
102 [CLOCK_TAI] = HRTIMER_BASE_TAI,
103};
104
105static inline int hrtimer_clockid_to_base(clockid_t clock_id)
106{
107 return hrtimer_clock_to_base_table[clock_id];
108}
109
110
111/*
112 * Get the coarse grained time at the softirq based on xtime and
113 * wall_to_monotonic.
114 */
115static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
116{
117 ktime_t xtim, mono, boot;
118 struct timespec xts, tom, slp;
119 s32 tai_offset;
120
121 get_xtime_and_monotonic_and_sleep_offset(&xts, &tom, &slp);
122 tai_offset = timekeeping_get_tai_offset();
123
124 xtim = timespec_to_ktime(xts);
125 mono = ktime_add(xtim, timespec_to_ktime(tom));
126 boot = ktime_add(mono, timespec_to_ktime(slp));
127 base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim;
128 base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono;
129 base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot;
130 base->clock_base[HRTIMER_BASE_TAI].softirq_time =
131 ktime_add(xtim, ktime_set(tai_offset, 0));
132}
133
134/*
135 * Functions and macros which are different for UP/SMP systems are kept in a
136 * single place
137 */
138#ifdef CONFIG_SMP
139
140/*
141 * We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock
142 * means that all timers which are tied to this base via timer->base are
143 * locked, and the base itself is locked too.
144 *
145 * So __run_timers/migrate_timers can safely modify all timers which could
146 * be found on the lists/queues.
147 *
148 * When the timer's base is locked, and the timer removed from list, it is
149 * possible to set timer->base = NULL and drop the lock: the timer remains
150 * locked.
151 */
152static
153struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
154 unsigned long *flags)
155{
156 struct hrtimer_clock_base *base;
157
158 for (;;) {
159 base = timer->base;
160 if (likely(base != NULL)) {
161 raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
162 if (likely(base == timer->base))
163 return base;
164 /* The timer has migrated to another CPU: */
165 raw_spin_unlock_irqrestore(&base->cpu_base->lock, *flags);
166 }
167 cpu_relax();
168 }
169}
170
171/*
172 * With HIGHRES=y we do not migrate the timer when it is expiring
173 * before the next event on the target cpu because we cannot reprogram
174 * the target cpu hardware and we would cause it to fire late.
175 *
176 * Called with cpu_base->lock of target cpu held.
177 */
178static int
179hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
180{
181#ifdef CONFIG_HIGH_RES_TIMERS
182 ktime_t expires;
183
184 if (!new_base->cpu_base->hres_active)
185 return 0;
186
187 expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
188 return expires.tv64 <= new_base->cpu_base->expires_next.tv64;
189#else
190 return 0;
191#endif
192}
193
194/*
195 * Switch the timer base to the current CPU when possible.
196 */
197static inline struct hrtimer_clock_base *
198switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
199 int pinned)
200{
201 struct hrtimer_clock_base *new_base;
202 struct hrtimer_cpu_base *new_cpu_base;
203 int this_cpu = smp_processor_id();
204 int cpu = get_nohz_timer_target(pinned);
205 int basenum = base->index;
206
207again:
208 new_cpu_base = &per_cpu(hrtimer_bases, cpu);
209 new_base = &new_cpu_base->clock_base[basenum];
210
211 if (base != new_base) {
212 /*
213 * We are trying to move timer to new_base.
214 * However we can't change timer's base while it is running,
215 * so we keep it on the same CPU. No hassle vs. reprogramming
216 * the event source in the high resolution case. The softirq
217 * code will take care of this when the timer function has
218 * completed. There is no conflict as we hold the lock until
219 * the timer is enqueued.
220 */
221 if (unlikely(hrtimer_callback_running(timer)))
222 return base;
223
224 /* See the comment in lock_timer_base() */
225 timer->base = NULL;
226 raw_spin_unlock(&base->cpu_base->lock);
227 raw_spin_lock(&new_base->cpu_base->lock);
228
229 if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
230 cpu = this_cpu;
231 raw_spin_unlock(&new_base->cpu_base->lock);
232 raw_spin_lock(&base->cpu_base->lock);
233 timer->base = base;
234 goto again;
235 }
236 timer->base = new_base;
237 } else {
238 if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
239 cpu = this_cpu;
240 goto again;
241 }
242 }
243 return new_base;
244}
245
246#else /* CONFIG_SMP */
247
248static inline struct hrtimer_clock_base *
249lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
250{
251 struct hrtimer_clock_base *base = timer->base;
252
253 raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
254
255 return base;
256}
257
258# define switch_hrtimer_base(t, b, p) (b)
259
260#endif /* !CONFIG_SMP */
261
262/*
263 * Functions for the union type storage format of ktime_t which are
264 * too large for inlining:
265 */
266#if BITS_PER_LONG < 64
267# ifndef CONFIG_KTIME_SCALAR
268/**
269 * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
270 * @kt: addend
271 * @nsec: the scalar nsec value to add
272 *
273 * Returns the sum of kt and nsec in ktime_t format
274 */
275ktime_t ktime_add_ns(const ktime_t kt, u64 nsec)
276{
277 ktime_t tmp;
278
279 if (likely(nsec < NSEC_PER_SEC)) {
280 tmp.tv64 = nsec;
281 } else {
282 unsigned long rem = do_div(nsec, NSEC_PER_SEC);
283
284 /* Make sure nsec fits into long */
285 if (unlikely(nsec > KTIME_SEC_MAX))
286 return (ktime_t){ .tv64 = KTIME_MAX };
287
288 tmp = ktime_set((long)nsec, rem);
289 }
290
291 return ktime_add(kt, tmp);
292}
293
294EXPORT_SYMBOL_GPL(ktime_add_ns);
295
296/**
297 * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
298 * @kt: minuend
299 * @nsec: the scalar nsec value to subtract
300 *
301 * Returns the subtraction of @nsec from @kt in ktime_t format
302 */
303ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec)
304{
305 ktime_t tmp;
306
307 if (likely(nsec < NSEC_PER_SEC)) {
308 tmp.tv64 = nsec;
309 } else {
310 unsigned long rem = do_div(nsec, NSEC_PER_SEC);
311
312 tmp = ktime_set((long)nsec, rem);
313 }
314
315 return ktime_sub(kt, tmp);
316}
317
318EXPORT_SYMBOL_GPL(ktime_sub_ns);
319# endif /* !CONFIG_KTIME_SCALAR */
320
321/*
322 * Divide a ktime value by a nanosecond value
323 */
324u64 ktime_divns(const ktime_t kt, s64 div)
325{
326 u64 dclc;
327 int sft = 0;
328
329 dclc = ktime_to_ns(kt);
330 /* Make sure the divisor is less than 2^32: */
331 while (div >> 32) {
332 sft++;
333 div >>= 1;
334 }
335 dclc >>= sft;
336 do_div(dclc, (unsigned long) div);
337
338 return dclc;
339}
340#endif /* BITS_PER_LONG >= 64 */
341
342/*
343 * Add two ktime values and do a safety check for overflow:
344 */
345ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs)
346{
347 ktime_t res = ktime_add(lhs, rhs);
348
349 /*
350 * We use KTIME_SEC_MAX here, the maximum timeout which we can
351 * return to user space in a timespec:
352 */
353 if (res.tv64 < 0 || res.tv64 < lhs.tv64 || res.tv64 < rhs.tv64)
354 res = ktime_set(KTIME_SEC_MAX, 0);
355
356 return res;
357}
358
359EXPORT_SYMBOL_GPL(ktime_add_safe);
360
361#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
362
363static struct debug_obj_descr hrtimer_debug_descr;
364
365static void *hrtimer_debug_hint(void *addr)
366{
367 return ((struct hrtimer *) addr)->function;
368}
369
370/*
371 * fixup_init is called when:
372 * - an active object is initialized
373 */
374static int hrtimer_fixup_init(void *addr, enum debug_obj_state state)
375{
376 struct hrtimer *timer = addr;
377
378 switch (state) {
379 case ODEBUG_STATE_ACTIVE:
380 hrtimer_cancel(timer);
381 debug_object_init(timer, &hrtimer_debug_descr);
382 return 1;
383 default:
384 return 0;
385 }
386}
387
388/*
389 * fixup_activate is called when:
390 * - an active object is activated
391 * - an unknown object is activated (might be a statically initialized object)
392 */
393static int hrtimer_fixup_activate(void *addr, enum debug_obj_state state)
394{
395 switch (state) {
396
397 case ODEBUG_STATE_NOTAVAILABLE:
398 WARN_ON_ONCE(1);
399 return 0;
400
401 case ODEBUG_STATE_ACTIVE:
402 WARN_ON(1);
403
404 default:
405 return 0;
406 }
407}
408
409/*
410 * fixup_free is called when:
411 * - an active object is freed
412 */
413static int hrtimer_fixup_free(void *addr, enum debug_obj_state state)
414{
415 struct hrtimer *timer = addr;
416
417 switch (state) {
418 case ODEBUG_STATE_ACTIVE:
419 hrtimer_cancel(timer);
420 debug_object_free(timer, &hrtimer_debug_descr);
421 return 1;
422 default:
423 return 0;
424 }
425}
426
427static struct debug_obj_descr hrtimer_debug_descr = {
428 .name = "hrtimer",
429 .debug_hint = hrtimer_debug_hint,
430 .fixup_init = hrtimer_fixup_init,
431 .fixup_activate = hrtimer_fixup_activate,
432 .fixup_free = hrtimer_fixup_free,
433};
434
435static inline void debug_hrtimer_init(struct hrtimer *timer)
436{
437 debug_object_init(timer, &hrtimer_debug_descr);
438}
439
440static inline void debug_hrtimer_activate(struct hrtimer *timer)
441{
442 debug_object_activate(timer, &hrtimer_debug_descr);
443}
444
445static inline void debug_hrtimer_deactivate(struct hrtimer *timer)
446{
447 debug_object_deactivate(timer, &hrtimer_debug_descr);
448}
449
450static inline void debug_hrtimer_free(struct hrtimer *timer)
451{
452 debug_object_free(timer, &hrtimer_debug_descr);
453}
454
455static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
456 enum hrtimer_mode mode);
457
458void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t clock_id,
459 enum hrtimer_mode mode)
460{
461 debug_object_init_on_stack(timer, &hrtimer_debug_descr);
462 __hrtimer_init(timer, clock_id, mode);
463}
464EXPORT_SYMBOL_GPL(hrtimer_init_on_stack);
465
466void destroy_hrtimer_on_stack(struct hrtimer *timer)
467{
468 debug_object_free(timer, &hrtimer_debug_descr);
469}
470
471#else
472static inline void debug_hrtimer_init(struct hrtimer *timer) { }
473static inline void debug_hrtimer_activate(struct hrtimer *timer) { }
474static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { }
475#endif
476
477static inline void
478debug_init(struct hrtimer *timer, clockid_t clockid,
479 enum hrtimer_mode mode)
480{
481 debug_hrtimer_init(timer);
482 trace_hrtimer_init(timer, clockid, mode);
483}
484
485static inline void debug_activate(struct hrtimer *timer)
486{
487 debug_hrtimer_activate(timer);
488 trace_hrtimer_start(timer);
489}
490
491static inline void debug_deactivate(struct hrtimer *timer)
492{
493 debug_hrtimer_deactivate(timer);
494 trace_hrtimer_cancel(timer);
495}
496
497/* High resolution timer related functions */
498#ifdef CONFIG_HIGH_RES_TIMERS
499
500/*
501 * High resolution timer enabled ?
502 */
503static int hrtimer_hres_enabled __read_mostly = 1;
504
505/*
506 * Enable / Disable high resolution mode
507 */
508static int __init setup_hrtimer_hres(char *str)
509{
510 if (!strcmp(str, "off"))
511 hrtimer_hres_enabled = 0;
512 else if (!strcmp(str, "on"))
513 hrtimer_hres_enabled = 1;
514 else
515 return 0;
516 return 1;
517}
518
519__setup("highres=", setup_hrtimer_hres);
520
521/*
522 * hrtimer_high_res_enabled - query, if the highres mode is enabled
523 */
524static inline int hrtimer_is_hres_enabled(void)
525{
526 return hrtimer_hres_enabled;
527}
528
529/*
530 * Is the high resolution mode active ?
531 */
532static inline int hrtimer_hres_active(void)
533{
534 return __this_cpu_read(hrtimer_bases.hres_active);
535}
536
537/*
538 * Reprogram the event source with checking both queues for the
539 * next event
540 * Called with interrupts disabled and base->lock held
541 */
542static void
543hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
544{
545 int i;
546 struct hrtimer_clock_base *base = cpu_base->clock_base;
547 ktime_t expires, expires_next;
548
549 expires_next.tv64 = KTIME_MAX;
550
551 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
552 struct hrtimer *timer;
553 struct timerqueue_node *next;
554
555 next = timerqueue_getnext(&base->active);
556 if (!next)
557 continue;
558 timer = container_of(next, struct hrtimer, node);
559
560 expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
561 /*
562 * clock_was_set() has changed base->offset so the
563 * result might be negative. Fix it up to prevent a
564 * false positive in clockevents_program_event()
565 */
566 if (expires.tv64 < 0)
567 expires.tv64 = 0;
568 if (expires.tv64 < expires_next.tv64)
569 expires_next = expires;
570 }
571
572 if (skip_equal && expires_next.tv64 == cpu_base->expires_next.tv64)
573 return;
574
575 cpu_base->expires_next.tv64 = expires_next.tv64;
576
577 /*
578 * If a hang was detected in the last timer interrupt then we
579 * leave the hang delay active in the hardware. We want the
580 * system to make progress. That also prevents the following
581 * scenario:
582 * T1 expires 50ms from now
583 * T2 expires 5s from now
584 *
585 * T1 is removed, so this code is called and would reprogram
586 * the hardware to 5s from now. Any hrtimer_start after that
587 * will not reprogram the hardware due to hang_detected being
588 * set. So we'd effectivly block all timers until the T2 event
589 * fires.
590 */
591 if (cpu_base->hang_detected)
592 return;
593
594 if (cpu_base->expires_next.tv64 != KTIME_MAX)
595 tick_program_event(cpu_base->expires_next, 1);
596}
597
598/*
599 * Shared reprogramming for clock_realtime and clock_monotonic
600 *
601 * When a timer is enqueued and expires earlier than the already enqueued
602 * timers, we have to check, whether it expires earlier than the timer for
603 * which the clock event device was armed.
604 *
605 * Called with interrupts disabled and base->cpu_base.lock held
606 */
607static int hrtimer_reprogram(struct hrtimer *timer,
608 struct hrtimer_clock_base *base)
609{
610 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
611 ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
612 int res;
613
614 WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0);
615
616 /*
617 * When the callback is running, we do not reprogram the clock event
618 * device. The timer callback is either running on a different CPU or
619 * the callback is executed in the hrtimer_interrupt context. The
620 * reprogramming is handled either by the softirq, which called the
621 * callback or at the end of the hrtimer_interrupt.
622 */
623 if (hrtimer_callback_running(timer))
624 return 0;
625
626 /*
627 * CLOCK_REALTIME timer might be requested with an absolute
628 * expiry time which is less than base->offset. Nothing wrong
629 * about that, just avoid to call into the tick code, which
630 * has now objections against negative expiry values.
631 */
632 if (expires.tv64 < 0)
633 return -ETIME;
634
635 if (expires.tv64 >= cpu_base->expires_next.tv64)
636 return 0;
637
638 /*
639 * If a hang was detected in the last timer interrupt then we
640 * do not schedule a timer which is earlier than the expiry
641 * which we enforced in the hang detection. We want the system
642 * to make progress.
643 */
644 if (cpu_base->hang_detected)
645 return 0;
646
647 /*
648 * Clockevents returns -ETIME, when the event was in the past.
649 */
650 res = tick_program_event(expires, 0);
651 if (!IS_ERR_VALUE(res))
652 cpu_base->expires_next = expires;
653 return res;
654}
655
656/*
657 * Initialize the high resolution related parts of cpu_base
658 */
659static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base)
660{
661 base->expires_next.tv64 = KTIME_MAX;
662 base->hres_active = 0;
663}
664
665/*
666 * When High resolution timers are active, try to reprogram. Note, that in case
667 * the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry
668 * check happens. The timer gets enqueued into the rbtree. The reprogramming
669 * and expiry check is done in the hrtimer_interrupt or in the softirq.
670 */
671static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
672 struct hrtimer_clock_base *base)
673{
674 return base->cpu_base->hres_active && hrtimer_reprogram(timer, base);
675}
676
677static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
678{
679 ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
680 ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
681 ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset;
682
683 return ktime_get_update_offsets(offs_real, offs_boot, offs_tai);
684}
685
686/*
687 * Retrigger next event is called after clock was set
688 *
689 * Called with interrupts disabled via on_each_cpu()
690 */
691static void retrigger_next_event(void *arg)
692{
693 struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
694
695 if (!hrtimer_hres_active())
696 return;
697
698 raw_spin_lock(&base->lock);
699 hrtimer_update_base(base);
700 hrtimer_force_reprogram(base, 0);
701 raw_spin_unlock(&base->lock);
702}
703
704/*
705 * Switch to high resolution mode
706 */
707static int hrtimer_switch_to_hres(void)
708{
709 int i, cpu = smp_processor_id();
710 struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu);
711 unsigned long flags;
712
713 if (base->hres_active)
714 return 1;
715
716 local_irq_save(flags);
717
718 if (tick_init_highres()) {
719 local_irq_restore(flags);
720 printk(KERN_WARNING "Could not switch to high resolution "
721 "mode on CPU %d\n", cpu);
722 return 0;
723 }
724 base->hres_active = 1;
725 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
726 base->clock_base[i].resolution = KTIME_HIGH_RES;
727
728 tick_setup_sched_timer();
729 /* "Retrigger" the interrupt to get things going */
730 retrigger_next_event(NULL);
731 local_irq_restore(flags);
732 return 1;
733}
734
735static void clock_was_set_work(struct work_struct *work)
736{
737 clock_was_set();
738}
739
740static DECLARE_WORK(hrtimer_work, clock_was_set_work);
741
742/*
743 * Called from timekeeping and resume code to reprogramm the hrtimer
744 * interrupt device on all cpus.
745 */
746void clock_was_set_delayed(void)
747{
748 schedule_work(&hrtimer_work);
749}
750
751#else
752
753static inline int hrtimer_hres_active(void) { return 0; }
754static inline int hrtimer_is_hres_enabled(void) { return 0; }
755static inline int hrtimer_switch_to_hres(void) { return 0; }
756static inline void
757hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
758static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
759 struct hrtimer_clock_base *base)
760{
761 return 0;
762}
763static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) { }
764static inline void retrigger_next_event(void *arg) { }
765
766#endif /* CONFIG_HIGH_RES_TIMERS */
767
768/*
769 * Clock realtime was set
770 *
771 * Change the offset of the realtime clock vs. the monotonic
772 * clock.
773 *
774 * We might have to reprogram the high resolution timer interrupt. On
775 * SMP we call the architecture specific code to retrigger _all_ high
776 * resolution timer interrupts. On UP we just disable interrupts and
777 * call the high resolution interrupt code.
778 */
779void clock_was_set(void)
780{
781#ifdef CONFIG_HIGH_RES_TIMERS
782 /* Retrigger the CPU local events everywhere */
783 on_each_cpu(retrigger_next_event, NULL, 1);
784#endif
785 timerfd_clock_was_set();
786}
787
788/*
789 * During resume we might have to reprogram the high resolution timer
790 * interrupt on all online CPUs. However, all other CPUs will be
791 * stopped with IRQs interrupts disabled so the clock_was_set() call
792 * must be deferred.
793 */
794void hrtimers_resume(void)
795{
796 WARN_ONCE(!irqs_disabled(),
797 KERN_INFO "hrtimers_resume() called with IRQs enabled!");
798
799 /* Retrigger on the local CPU */
800 retrigger_next_event(NULL);
801 /* And schedule a retrigger for all others */
802 clock_was_set_delayed();
803}
804
805static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
806{
807#ifdef CONFIG_TIMER_STATS
808 if (timer->start_site)
809 return;
810 timer->start_site = __builtin_return_address(0);
811 memcpy(timer->start_comm, current->comm, TASK_COMM_LEN);
812 timer->start_pid = current->pid;
813#endif
814}
815
816static inline void timer_stats_hrtimer_clear_start_info(struct hrtimer *timer)
817{
818#ifdef CONFIG_TIMER_STATS
819 timer->start_site = NULL;
820#endif
821}
822
823static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
824{
825#ifdef CONFIG_TIMER_STATS
826 if (likely(!timer_stats_active))
827 return;
828 timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
829 timer->function, timer->start_comm, 0);
830#endif
831}
832
833/*
834 * Counterpart to lock_hrtimer_base above:
835 */
836static inline
837void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
838{
839 raw_spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags);
840}
841
842/**
843 * hrtimer_forward - forward the timer expiry
844 * @timer: hrtimer to forward
845 * @now: forward past this time
846 * @interval: the interval to forward
847 *
848 * Forward the timer expiry so it will expire in the future.
849 * Returns the number of overruns.
850 */
851u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
852{
853 u64 orun = 1;
854 ktime_t delta;
855
856 delta = ktime_sub(now, hrtimer_get_expires(timer));
857
858 if (delta.tv64 < 0)
859 return 0;
860
861 if (interval.tv64 < timer->base->resolution.tv64)
862 interval.tv64 = timer->base->resolution.tv64;
863
864 if (unlikely(delta.tv64 >= interval.tv64)) {
865 s64 incr = ktime_to_ns(interval);
866
867 orun = ktime_divns(delta, incr);
868 hrtimer_add_expires_ns(timer, incr * orun);
869 if (hrtimer_get_expires_tv64(timer) > now.tv64)
870 return orun;
871 /*
872 * This (and the ktime_add() below) is the
873 * correction for exact:
874 */
875 orun++;
876 }
877 hrtimer_add_expires(timer, interval);
878
879 return orun;
880}
881EXPORT_SYMBOL_GPL(hrtimer_forward);
882
883/*
884 * enqueue_hrtimer - internal function to (re)start a timer
885 *
886 * The timer is inserted in expiry order. Insertion into the
887 * red black tree is O(log(n)). Must hold the base lock.
888 *
889 * Returns 1 when the new timer is the leftmost timer in the tree.
890 */
891static int enqueue_hrtimer(struct hrtimer *timer,
892 struct hrtimer_clock_base *base)
893{
894 debug_activate(timer);
895
896 timerqueue_add(&base->active, &timer->node);
897 base->cpu_base->active_bases |= 1 << base->index;
898
899 /*
900 * HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the
901 * state of a possibly running callback.
902 */
903 timer->state |= HRTIMER_STATE_ENQUEUED;
904
905 return (&timer->node == base->active.next);
906}
907
908/*
909 * __remove_hrtimer - internal function to remove a timer
910 *
911 * Caller must hold the base lock.
912 *
913 * High resolution timer mode reprograms the clock event device when the
914 * timer is the one which expires next. The caller can disable this by setting
915 * reprogram to zero. This is useful, when the context does a reprogramming
916 * anyway (e.g. timer interrupt)
917 */
918static void __remove_hrtimer(struct hrtimer *timer,
919 struct hrtimer_clock_base *base,
920 unsigned long newstate, int reprogram)
921{
922 struct timerqueue_node *next_timer;
923 if (!(timer->state & HRTIMER_STATE_ENQUEUED))
924 goto out;
925
926 next_timer = timerqueue_getnext(&base->active);
927 timerqueue_del(&base->active, &timer->node);
928 if (&timer->node == next_timer) {
929#ifdef CONFIG_HIGH_RES_TIMERS
930 /* Reprogram the clock event device. if enabled */
931 if (reprogram && hrtimer_hres_active()) {
932 ktime_t expires;
933
934 expires = ktime_sub(hrtimer_get_expires(timer),
935 base->offset);
936 if (base->cpu_base->expires_next.tv64 == expires.tv64)
937 hrtimer_force_reprogram(base->cpu_base, 1);
938 }
939#endif
940 }
941 if (!timerqueue_getnext(&base->active))
942 base->cpu_base->active_bases &= ~(1 << base->index);
943out:
944 timer->state = newstate;
945}
946
947/*
948 * remove hrtimer, called with base lock held
949 */
950static inline int
951remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
952{
953 if (hrtimer_is_queued(timer)) {
954 unsigned long state;
955 int reprogram;
956
957 /*
958 * Remove the timer and force reprogramming when high
959 * resolution mode is active and the timer is on the current
960 * CPU. If we remove a timer on another CPU, reprogramming is
961 * skipped. The interrupt event on this CPU is fired and
962 * reprogramming happens in the interrupt handler. This is a
963 * rare case and less expensive than a smp call.
964 */
965 debug_deactivate(timer);
966 timer_stats_hrtimer_clear_start_info(timer);
967 reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases);
968 /*
969 * We must preserve the CALLBACK state flag here,
970 * otherwise we could move the timer base in
971 * switch_hrtimer_base.
972 */
973 state = timer->state & HRTIMER_STATE_CALLBACK;
974 __remove_hrtimer(timer, base, state, reprogram);
975 return 1;
976 }
977 return 0;
978}
979
980int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
981 unsigned long delta_ns, const enum hrtimer_mode mode,
982 int wakeup)
983{
984 struct hrtimer_clock_base *base, *new_base;
985 unsigned long flags;
986 int ret, leftmost;
987
988 base = lock_hrtimer_base(timer, &flags);
989
990 /* Remove an active timer from the queue: */
991 ret = remove_hrtimer(timer, base);
992
993 if (mode & HRTIMER_MODE_REL) {
994 tim = ktime_add_safe(tim, base->get_time());
995 /*
996 * CONFIG_TIME_LOW_RES is a temporary way for architectures
997 * to signal that they simply return xtime in
998 * do_gettimeoffset(). In this case we want to round up by
999 * resolution when starting a relative timer, to avoid short
1000 * timeouts. This will go away with the GTOD framework.
1001 */
1002#ifdef CONFIG_TIME_LOW_RES
1003 tim = ktime_add_safe(tim, base->resolution);
1004#endif
1005 }
1006
1007 hrtimer_set_expires_range_ns(timer, tim, delta_ns);
1008
1009 /* Switch the timer base, if necessary: */
1010 new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
1011
1012 timer_stats_hrtimer_set_start_info(timer);
1013
1014 leftmost = enqueue_hrtimer(timer, new_base);
1015
1016 /*
1017 * Only allow reprogramming if the new base is on this CPU.
1018 * (it might still be on another CPU if the timer was pending)
1019 *
1020 * XXX send_remote_softirq() ?
1021 */
1022 if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases)
1023 && hrtimer_enqueue_reprogram(timer, new_base)) {
1024 if (wakeup) {
1025 /*
1026 * We need to drop cpu_base->lock to avoid a
1027 * lock ordering issue vs. rq->lock.
1028 */
1029 raw_spin_unlock(&new_base->cpu_base->lock);
1030 raise_softirq_irqoff(HRTIMER_SOFTIRQ);
1031 local_irq_restore(flags);
1032 return ret;
1033 } else {
1034 __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
1035 }
1036 }
1037
1038 unlock_hrtimer_base(timer, &flags);
1039
1040 return ret;
1041}
1042
1043/**
1044 * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
1045 * @timer: the timer to be added
1046 * @tim: expiry time
1047 * @delta_ns: "slack" range for the timer
1048 * @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or
1049 * relative (HRTIMER_MODE_REL)
1050 *
1051 * Returns:
1052 * 0 on success
1053 * 1 when the timer was active
1054 */
1055int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
1056 unsigned long delta_ns, const enum hrtimer_mode mode)
1057{
1058 return __hrtimer_start_range_ns(timer, tim, delta_ns, mode, 1);
1059}
1060EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
1061
1062/**
1063 * hrtimer_start - (re)start an hrtimer on the current CPU
1064 * @timer: the timer to be added
1065 * @tim: expiry time
1066 * @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or
1067 * relative (HRTIMER_MODE_REL)
1068 *
1069 * Returns:
1070 * 0 on success
1071 * 1 when the timer was active
1072 */
1073int
1074hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
1075{
1076 return __hrtimer_start_range_ns(timer, tim, 0, mode, 1);
1077}
1078EXPORT_SYMBOL_GPL(hrtimer_start);
1079
1080
1081/**
1082 * hrtimer_try_to_cancel - try to deactivate a timer
1083 * @timer: hrtimer to stop
1084 *
1085 * Returns:
1086 * 0 when the timer was not active
1087 * 1 when the timer was active
1088 * -1 when the timer is currently excuting the callback function and
1089 * cannot be stopped
1090 */
1091int hrtimer_try_to_cancel(struct hrtimer *timer)
1092{
1093 struct hrtimer_clock_base *base;
1094 unsigned long flags;
1095 int ret = -1;
1096
1097 base = lock_hrtimer_base(timer, &flags);
1098
1099 if (!hrtimer_callback_running(timer))
1100 ret = remove_hrtimer(timer, base);
1101
1102 unlock_hrtimer_base(timer, &flags);
1103
1104 return ret;
1105
1106}
1107EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel);
1108
1109/**
1110 * hrtimer_cancel - cancel a timer and wait for the handler to finish.
1111 * @timer: the timer to be cancelled
1112 *
1113 * Returns:
1114 * 0 when the timer was not active
1115 * 1 when the timer was active
1116 */
1117int hrtimer_cancel(struct hrtimer *timer)
1118{
1119 for (;;) {
1120 int ret = hrtimer_try_to_cancel(timer);
1121
1122 if (ret >= 0)
1123 return ret;
1124 cpu_relax();
1125 }
1126}
1127EXPORT_SYMBOL_GPL(hrtimer_cancel);
1128
1129/**
1130 * hrtimer_get_remaining - get remaining time for the timer
1131 * @timer: the timer to read
1132 */
1133ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
1134{
1135 unsigned long flags;
1136 ktime_t rem;
1137
1138 lock_hrtimer_base(timer, &flags);
1139 rem = hrtimer_expires_remaining(timer);
1140 unlock_hrtimer_base(timer, &flags);
1141
1142 return rem;
1143}
1144EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
1145
1146#ifdef CONFIG_NO_HZ_COMMON
1147/**
1148 * hrtimer_get_next_event - get the time until next expiry event
1149 *
1150 * Returns the delta to the next expiry event or KTIME_MAX if no timer
1151 * is pending.
1152 */
1153ktime_t hrtimer_get_next_event(void)
1154{
1155 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1156 struct hrtimer_clock_base *base = cpu_base->clock_base;
1157 ktime_t delta, mindelta = { .tv64 = KTIME_MAX };
1158 unsigned long flags;
1159 int i;
1160
1161 raw_spin_lock_irqsave(&cpu_base->lock, flags);
1162
1163 if (!hrtimer_hres_active()) {
1164 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
1165 struct hrtimer *timer;
1166 struct timerqueue_node *next;
1167
1168 next = timerqueue_getnext(&base->active);
1169 if (!next)
1170 continue;
1171
1172 timer = container_of(next, struct hrtimer, node);
1173 delta.tv64 = hrtimer_get_expires_tv64(timer);
1174 delta = ktime_sub(delta, base->get_time());
1175 if (delta.tv64 < mindelta.tv64)
1176 mindelta.tv64 = delta.tv64;
1177 }
1178 }
1179
1180 raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
1181
1182 if (mindelta.tv64 < 0)
1183 mindelta.tv64 = 0;
1184 return mindelta;
1185}
1186#endif
1187
1188static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1189 enum hrtimer_mode mode)
1190{
1191 struct hrtimer_cpu_base *cpu_base;
1192 int base;
1193
1194 memset(timer, 0, sizeof(struct hrtimer));
1195
1196 cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1197
1198 if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS)
1199 clock_id = CLOCK_MONOTONIC;
1200
1201 base = hrtimer_clockid_to_base(clock_id);
1202 timer->base = &cpu_base->clock_base[base];
1203 timerqueue_init(&timer->node);
1204
1205#ifdef CONFIG_TIMER_STATS
1206 timer->start_site = NULL;
1207 timer->start_pid = -1;
1208 memset(timer->start_comm, 0, TASK_COMM_LEN);
1209#endif
1210}
1211
1212/**
1213 * hrtimer_init - initialize a timer to the given clock
1214 * @timer: the timer to be initialized
1215 * @clock_id: the clock to be used
1216 * @mode: timer mode abs/rel
1217 */
1218void hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1219 enum hrtimer_mode mode)
1220{
1221 debug_init(timer, clock_id, mode);
1222 __hrtimer_init(timer, clock_id, mode);
1223}
1224EXPORT_SYMBOL_GPL(hrtimer_init);
1225
1226/**
1227 * hrtimer_get_res - get the timer resolution for a clock
1228 * @which_clock: which clock to query
1229 * @tp: pointer to timespec variable to store the resolution
1230 *
1231 * Store the resolution of the clock selected by @which_clock in the
1232 * variable pointed to by @tp.
1233 */
1234int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp)
1235{
1236 struct hrtimer_cpu_base *cpu_base;
1237 int base = hrtimer_clockid_to_base(which_clock);
1238
1239 cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1240 *tp = ktime_to_timespec(cpu_base->clock_base[base].resolution);
1241
1242 return 0;
1243}
1244EXPORT_SYMBOL_GPL(hrtimer_get_res);
1245
1246static void __run_hrtimer(struct hrtimer *timer, ktime_t *now)
1247{
1248 struct hrtimer_clock_base *base = timer->base;
1249 struct hrtimer_cpu_base *cpu_base = base->cpu_base;
1250 enum hrtimer_restart (*fn)(struct hrtimer *);
1251 int restart;
1252
1253 WARN_ON(!irqs_disabled());
1254
1255 debug_deactivate(timer);
1256 __remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0);
1257 timer_stats_account_hrtimer(timer);
1258 fn = timer->function;
1259
1260 /*
1261 * Because we run timers from hardirq context, there is no chance
1262 * they get migrated to another cpu, therefore its safe to unlock
1263 * the timer base.
1264 */
1265 raw_spin_unlock(&cpu_base->lock);
1266 trace_hrtimer_expire_entry(timer, now);
1267 restart = fn(timer);
1268 trace_hrtimer_expire_exit(timer);
1269 raw_spin_lock(&cpu_base->lock);
1270
1271 /*
1272 * Note: We clear the CALLBACK bit after enqueue_hrtimer and
1273 * we do not reprogramm the event hardware. Happens either in
1274 * hrtimer_start_range_ns() or in hrtimer_interrupt()
1275 */
1276 if (restart != HRTIMER_NORESTART) {
1277 BUG_ON(timer->state != HRTIMER_STATE_CALLBACK);
1278 enqueue_hrtimer(timer, base);
1279 }
1280
1281 WARN_ON_ONCE(!(timer->state & HRTIMER_STATE_CALLBACK));
1282
1283 timer->state &= ~HRTIMER_STATE_CALLBACK;
1284}
1285
1286#ifdef CONFIG_HIGH_RES_TIMERS
1287
1288/*
1289 * High resolution timer interrupt
1290 * Called with interrupts disabled
1291 */
1292void hrtimer_interrupt(struct clock_event_device *dev)
1293{
1294 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1295 ktime_t expires_next, now, entry_time, delta;
1296 int i, retries = 0;
1297
1298 BUG_ON(!cpu_base->hres_active);
1299 cpu_base->nr_events++;
1300 dev->next_event.tv64 = KTIME_MAX;
1301
1302 raw_spin_lock(&cpu_base->lock);
1303 entry_time = now = hrtimer_update_base(cpu_base);
1304retry:
1305 expires_next.tv64 = KTIME_MAX;
1306 /*
1307 * We set expires_next to KTIME_MAX here with cpu_base->lock
1308 * held to prevent that a timer is enqueued in our queue via
1309 * the migration code. This does not affect enqueueing of
1310 * timers which run their callback and need to be requeued on
1311 * this CPU.
1312 */
1313 cpu_base->expires_next.tv64 = KTIME_MAX;
1314
1315 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1316 struct hrtimer_clock_base *base;
1317 struct timerqueue_node *node;
1318 ktime_t basenow;
1319
1320 if (!(cpu_base->active_bases & (1 << i)))
1321 continue;
1322
1323 base = cpu_base->clock_base + i;
1324 basenow = ktime_add(now, base->offset);
1325
1326 while ((node = timerqueue_getnext(&base->active))) {
1327 struct hrtimer *timer;
1328
1329 timer = container_of(node, struct hrtimer, node);
1330
1331 /*
1332 * The immediate goal for using the softexpires is
1333 * minimizing wakeups, not running timers at the
1334 * earliest interrupt after their soft expiration.
1335 * This allows us to avoid using a Priority Search
1336 * Tree, which can answer a stabbing querry for
1337 * overlapping intervals and instead use the simple
1338 * BST we already have.
1339 * We don't add extra wakeups by delaying timers that
1340 * are right-of a not yet expired timer, because that
1341 * timer will have to trigger a wakeup anyway.
1342 */
1343
1344 if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) {
1345 ktime_t expires;
1346
1347 expires = ktime_sub(hrtimer_get_expires(timer),
1348 base->offset);
1349 if (expires.tv64 < 0)
1350 expires.tv64 = KTIME_MAX;
1351 if (expires.tv64 < expires_next.tv64)
1352 expires_next = expires;
1353 break;
1354 }
1355
1356 __run_hrtimer(timer, &basenow);
1357 }
1358 }
1359
1360 /*
1361 * Store the new expiry value so the migration code can verify
1362 * against it.
1363 */
1364 cpu_base->expires_next = expires_next;
1365 raw_spin_unlock(&cpu_base->lock);
1366
1367 /* Reprogramming necessary ? */
1368 if (expires_next.tv64 == KTIME_MAX ||
1369 !tick_program_event(expires_next, 0)) {
1370 cpu_base->hang_detected = 0;
1371 return;
1372 }
1373
1374 /*
1375 * The next timer was already expired due to:
1376 * - tracing
1377 * - long lasting callbacks
1378 * - being scheduled away when running in a VM
1379 *
1380 * We need to prevent that we loop forever in the hrtimer
1381 * interrupt routine. We give it 3 attempts to avoid
1382 * overreacting on some spurious event.
1383 *
1384 * Acquire base lock for updating the offsets and retrieving
1385 * the current time.
1386 */
1387 raw_spin_lock(&cpu_base->lock);
1388 now = hrtimer_update_base(cpu_base);
1389 cpu_base->nr_retries++;
1390 if (++retries < 3)
1391 goto retry;
1392 /*
1393 * Give the system a chance to do something else than looping
1394 * here. We stored the entry time, so we know exactly how long
1395 * we spent here. We schedule the next event this amount of
1396 * time away.
1397 */
1398 cpu_base->nr_hangs++;
1399 cpu_base->hang_detected = 1;
1400 raw_spin_unlock(&cpu_base->lock);
1401 delta = ktime_sub(now, entry_time);
1402 if (delta.tv64 > cpu_base->max_hang_time.tv64)
1403 cpu_base->max_hang_time = delta;
1404 /*
1405 * Limit it to a sensible value as we enforce a longer
1406 * delay. Give the CPU at least 100ms to catch up.
1407 */
1408 if (delta.tv64 > 100 * NSEC_PER_MSEC)
1409 expires_next = ktime_add_ns(now, 100 * NSEC_PER_MSEC);
1410 else
1411 expires_next = ktime_add(now, delta);
1412 tick_program_event(expires_next, 1);
1413 printk_once(KERN_WARNING "hrtimer: interrupt took %llu ns\n",
1414 ktime_to_ns(delta));
1415}
1416
1417/*
1418 * local version of hrtimer_peek_ahead_timers() called with interrupts
1419 * disabled.
1420 */
1421static void __hrtimer_peek_ahead_timers(void)
1422{
1423 struct tick_device *td;
1424
1425 if (!hrtimer_hres_active())
1426 return;
1427
1428 td = &__get_cpu_var(tick_cpu_device);
1429 if (td && td->evtdev)
1430 hrtimer_interrupt(td->evtdev);
1431}
1432
1433/**
1434 * hrtimer_peek_ahead_timers -- run soft-expired timers now
1435 *
1436 * hrtimer_peek_ahead_timers will peek at the timer queue of
1437 * the current cpu and check if there are any timers for which
1438 * the soft expires time has passed. If any such timers exist,
1439 * they are run immediately and then removed from the timer queue.
1440 *
1441 */
1442void hrtimer_peek_ahead_timers(void)
1443{
1444 unsigned long flags;
1445
1446 local_irq_save(flags);
1447 __hrtimer_peek_ahead_timers();
1448 local_irq_restore(flags);
1449}
1450
1451static void run_hrtimer_softirq(struct softirq_action *h)
1452{
1453 hrtimer_peek_ahead_timers();
1454}
1455
1456#else /* CONFIG_HIGH_RES_TIMERS */
1457
1458static inline void __hrtimer_peek_ahead_timers(void) { }
1459
1460#endif /* !CONFIG_HIGH_RES_TIMERS */
1461
1462/*
1463 * Called from timer softirq every jiffy, expire hrtimers:
1464 *
1465 * For HRT its the fall back code to run the softirq in the timer
1466 * softirq context in case the hrtimer initialization failed or has
1467 * not been done yet.
1468 */
1469void hrtimer_run_pending(void)
1470{
1471 if (hrtimer_hres_active())
1472 return;
1473
1474 /*
1475 * This _is_ ugly: We have to check in the softirq context,
1476 * whether we can switch to highres and / or nohz mode. The
1477 * clocksource switch happens in the timer interrupt with
1478 * xtime_lock held. Notification from there only sets the
1479 * check bit in the tick_oneshot code, otherwise we might
1480 * deadlock vs. xtime_lock.
1481 */
1482 if (tick_check_oneshot_change(!hrtimer_is_hres_enabled()))
1483 hrtimer_switch_to_hres();
1484}
1485
1486/*
1487 * Called from hardirq context every jiffy
1488 */
1489void hrtimer_run_queues(void)
1490{
1491 struct timerqueue_node *node;
1492 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1493 struct hrtimer_clock_base *base;
1494 int index, gettime = 1;
1495
1496 if (hrtimer_hres_active())
1497 return;
1498
1499 for (index = 0; index < HRTIMER_MAX_CLOCK_BASES; index++) {
1500 base = &cpu_base->clock_base[index];
1501 if (!timerqueue_getnext(&base->active))
1502 continue;
1503
1504 if (gettime) {
1505 hrtimer_get_softirq_time(cpu_base);
1506 gettime = 0;
1507 }
1508
1509 raw_spin_lock(&cpu_base->lock);
1510
1511 while ((node = timerqueue_getnext(&base->active))) {
1512 struct hrtimer *timer;
1513
1514 timer = container_of(node, struct hrtimer, node);
1515 if (base->softirq_time.tv64 <=
1516 hrtimer_get_expires_tv64(timer))
1517 break;
1518
1519 __run_hrtimer(timer, &base->softirq_time);
1520 }
1521 raw_spin_unlock(&cpu_base->lock);
1522 }
1523}
1524
1525/*
1526 * Sleep related functions:
1527 */
1528static enum hrtimer_restart hrtimer_wakeup(struct hrtimer *timer)
1529{
1530 struct hrtimer_sleeper *t =
1531 container_of(timer, struct hrtimer_sleeper, timer);
1532 struct task_struct *task = t->task;
1533
1534 t->task = NULL;
1535 if (task)
1536 wake_up_process(task);
1537
1538 return HRTIMER_NORESTART;
1539}
1540
1541void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task)
1542{
1543 sl->timer.function = hrtimer_wakeup;
1544 sl->task = task;
1545}
1546EXPORT_SYMBOL_GPL(hrtimer_init_sleeper);
1547
1548static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
1549{
1550 hrtimer_init_sleeper(t, current);
1551
1552 do {
1553 set_current_state(TASK_INTERRUPTIBLE);
1554 hrtimer_start_expires(&t->timer, mode);
1555 if (!hrtimer_active(&t->timer))
1556 t->task = NULL;
1557
1558 if (likely(t->task))
1559 freezable_schedule();
1560
1561 hrtimer_cancel(&t->timer);
1562 mode = HRTIMER_MODE_ABS;
1563
1564 } while (t->task && !signal_pending(current));
1565
1566 __set_current_state(TASK_RUNNING);
1567
1568 return t->task == NULL;
1569}
1570
1571static int update_rmtp(struct hrtimer *timer, struct timespec __user *rmtp)
1572{
1573 struct timespec rmt;
1574 ktime_t rem;
1575
1576 rem = hrtimer_expires_remaining(timer);
1577 if (rem.tv64 <= 0)
1578 return 0;
1579 rmt = ktime_to_timespec(rem);
1580
1581 if (copy_to_user(rmtp, &rmt, sizeof(*rmtp)))
1582 return -EFAULT;
1583
1584 return 1;
1585}
1586
1587long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
1588{
1589 struct hrtimer_sleeper t;
1590 struct timespec __user *rmtp;
1591 int ret = 0;
1592
1593 hrtimer_init_on_stack(&t.timer, restart->nanosleep.clockid,
1594 HRTIMER_MODE_ABS);
1595 hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
1596
1597 if (do_nanosleep(&t, HRTIMER_MODE_ABS))
1598 goto out;
1599
1600 rmtp = restart->nanosleep.rmtp;
1601 if (rmtp) {
1602 ret = update_rmtp(&t.timer, rmtp);
1603 if (ret <= 0)
1604 goto out;
1605 }
1606
1607 /* The other values in restart are already filled in */
1608 ret = -ERESTART_RESTARTBLOCK;
1609out:
1610 destroy_hrtimer_on_stack(&t.timer);
1611 return ret;
1612}
1613
1614long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp,
1615 const enum hrtimer_mode mode, const clockid_t clockid)
1616{
1617 struct restart_block *restart;
1618 struct hrtimer_sleeper t;
1619 int ret = 0;
1620 unsigned long slack;
1621
1622 slack = current->timer_slack_ns;
1623 if (dl_task(current) || rt_task(current))
1624 slack = 0;
1625
1626 hrtimer_init_on_stack(&t.timer, clockid, mode);
1627 hrtimer_set_expires_range_ns(&t.timer, timespec_to_ktime(*rqtp), slack);
1628 if (do_nanosleep(&t, mode))
1629 goto out;
1630
1631 /* Absolute timers do not update the rmtp value and restart: */
1632 if (mode == HRTIMER_MODE_ABS) {
1633 ret = -ERESTARTNOHAND;
1634 goto out;
1635 }
1636
1637 if (rmtp) {
1638 ret = update_rmtp(&t.timer, rmtp);
1639 if (ret <= 0)
1640 goto out;
1641 }
1642
1643 restart = ¤t_thread_info()->restart_block;
1644 restart->fn = hrtimer_nanosleep_restart;
1645 restart->nanosleep.clockid = t.timer.base->clockid;
1646 restart->nanosleep.rmtp = rmtp;
1647 restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
1648
1649 ret = -ERESTART_RESTARTBLOCK;
1650out:
1651 destroy_hrtimer_on_stack(&t.timer);
1652 return ret;
1653}
1654
1655SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp,
1656 struct timespec __user *, rmtp)
1657{
1658 struct timespec tu;
1659
1660 if (copy_from_user(&tu, rqtp, sizeof(tu)))
1661 return -EFAULT;
1662
1663 if (!timespec_valid(&tu))
1664 return -EINVAL;
1665
1666 return hrtimer_nanosleep(&tu, rmtp, HRTIMER_MODE_REL, CLOCK_MONOTONIC);
1667}
1668
1669/*
1670 * Functions related to boot-time initialization:
1671 */
1672static void init_hrtimers_cpu(int cpu)
1673{
1674 struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
1675 int i;
1676
1677 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1678 cpu_base->clock_base[i].cpu_base = cpu_base;
1679 timerqueue_init_head(&cpu_base->clock_base[i].active);
1680 }
1681
1682 hrtimer_init_hres(cpu_base);
1683}
1684
1685#ifdef CONFIG_HOTPLUG_CPU
1686
1687static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
1688 struct hrtimer_clock_base *new_base)
1689{
1690 struct hrtimer *timer;
1691 struct timerqueue_node *node;
1692
1693 while ((node = timerqueue_getnext(&old_base->active))) {
1694 timer = container_of(node, struct hrtimer, node);
1695 BUG_ON(hrtimer_callback_running(timer));
1696 debug_deactivate(timer);
1697
1698 /*
1699 * Mark it as STATE_MIGRATE not INACTIVE otherwise the
1700 * timer could be seen as !active and just vanish away
1701 * under us on another CPU
1702 */
1703 __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
1704 timer->base = new_base;
1705 /*
1706 * Enqueue the timers on the new cpu. This does not
1707 * reprogram the event device in case the timer
1708 * expires before the earliest on this CPU, but we run
1709 * hrtimer_interrupt after we migrated everything to
1710 * sort out already expired timers and reprogram the
1711 * event device.
1712 */
1713 enqueue_hrtimer(timer, new_base);
1714
1715 /* Clear the migration state bit */
1716 timer->state &= ~HRTIMER_STATE_MIGRATE;
1717 }
1718}
1719
1720static void migrate_hrtimers(int scpu)
1721{
1722 struct hrtimer_cpu_base *old_base, *new_base;
1723 int i;
1724
1725 BUG_ON(cpu_online(scpu));
1726 tick_cancel_sched_timer(scpu);
1727
1728 local_irq_disable();
1729 old_base = &per_cpu(hrtimer_bases, scpu);
1730 new_base = &__get_cpu_var(hrtimer_bases);
1731 /*
1732 * The caller is globally serialized and nobody else
1733 * takes two locks at once, deadlock is not possible.
1734 */
1735 raw_spin_lock(&new_base->lock);
1736 raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
1737
1738 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1739 migrate_hrtimer_list(&old_base->clock_base[i],
1740 &new_base->clock_base[i]);
1741 }
1742
1743 raw_spin_unlock(&old_base->lock);
1744 raw_spin_unlock(&new_base->lock);
1745
1746 /* Check, if we got expired work to do */
1747 __hrtimer_peek_ahead_timers();
1748 local_irq_enable();
1749}
1750
1751#endif /* CONFIG_HOTPLUG_CPU */
1752
1753static int hrtimer_cpu_notify(struct notifier_block *self,
1754 unsigned long action, void *hcpu)
1755{
1756 int scpu = (long)hcpu;
1757
1758 switch (action) {
1759
1760 case CPU_UP_PREPARE:
1761 case CPU_UP_PREPARE_FROZEN:
1762 init_hrtimers_cpu(scpu);
1763 break;
1764
1765#ifdef CONFIG_HOTPLUG_CPU
1766 case CPU_DYING:
1767 case CPU_DYING_FROZEN:
1768 clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu);
1769 break;
1770 case CPU_DEAD:
1771 case CPU_DEAD_FROZEN:
1772 {
1773 clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu);
1774 migrate_hrtimers(scpu);
1775 break;
1776 }
1777#endif
1778
1779 default:
1780 break;
1781 }
1782
1783 return NOTIFY_OK;
1784}
1785
1786static struct notifier_block hrtimers_nb = {
1787 .notifier_call = hrtimer_cpu_notify,
1788};
1789
1790void __init hrtimers_init(void)
1791{
1792 hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE,
1793 (void *)(long)smp_processor_id());
1794 register_cpu_notifier(&hrtimers_nb);
1795#ifdef CONFIG_HIGH_RES_TIMERS
1796 open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq);
1797#endif
1798}
1799
1800/**
1801 * schedule_hrtimeout_range_clock - sleep until timeout
1802 * @expires: timeout value (ktime_t)
1803 * @delta: slack in expires timeout (ktime_t)
1804 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1805 * @clock: timer clock, CLOCK_MONOTONIC or CLOCK_REALTIME
1806 */
1807int __sched
1808schedule_hrtimeout_range_clock(ktime_t *expires, unsigned long delta,
1809 const enum hrtimer_mode mode, int clock)
1810{
1811 struct hrtimer_sleeper t;
1812
1813 /*
1814 * Optimize when a zero timeout value is given. It does not
1815 * matter whether this is an absolute or a relative time.
1816 */
1817 if (expires && !expires->tv64) {
1818 __set_current_state(TASK_RUNNING);
1819 return 0;
1820 }
1821
1822 /*
1823 * A NULL parameter means "infinite"
1824 */
1825 if (!expires) {
1826 schedule();
1827 __set_current_state(TASK_RUNNING);
1828 return -EINTR;
1829 }
1830
1831 hrtimer_init_on_stack(&t.timer, clock, mode);
1832 hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
1833
1834 hrtimer_init_sleeper(&t, current);
1835
1836 hrtimer_start_expires(&t.timer, mode);
1837 if (!hrtimer_active(&t.timer))
1838 t.task = NULL;
1839
1840 if (likely(t.task))
1841 schedule();
1842
1843 hrtimer_cancel(&t.timer);
1844 destroy_hrtimer_on_stack(&t.timer);
1845
1846 __set_current_state(TASK_RUNNING);
1847
1848 return !t.task ? 0 : -EINTR;
1849}
1850
1851/**
1852 * schedule_hrtimeout_range - sleep until timeout
1853 * @expires: timeout value (ktime_t)
1854 * @delta: slack in expires timeout (ktime_t)
1855 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1856 *
1857 * Make the current task sleep until the given expiry time has
1858 * elapsed. The routine will return immediately unless
1859 * the current task state has been set (see set_current_state()).
1860 *
1861 * The @delta argument gives the kernel the freedom to schedule the
1862 * actual wakeup to a time that is both power and performance friendly.
1863 * The kernel give the normal best effort behavior for "@expires+@delta",
1864 * but may decide to fire the timer earlier, but no earlier than @expires.
1865 *
1866 * You can set the task state as follows -
1867 *
1868 * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1869 * pass before the routine returns.
1870 *
1871 * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1872 * delivered to the current task.
1873 *
1874 * The current task state is guaranteed to be TASK_RUNNING when this
1875 * routine returns.
1876 *
1877 * Returns 0 when the timer has expired otherwise -EINTR
1878 */
1879int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
1880 const enum hrtimer_mode mode)
1881{
1882 return schedule_hrtimeout_range_clock(expires, delta, mode,
1883 CLOCK_MONOTONIC);
1884}
1885EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
1886
1887/**
1888 * schedule_hrtimeout - sleep until timeout
1889 * @expires: timeout value (ktime_t)
1890 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1891 *
1892 * Make the current task sleep until the given expiry time has
1893 * elapsed. The routine will return immediately unless
1894 * the current task state has been set (see set_current_state()).
1895 *
1896 * You can set the task state as follows -
1897 *
1898 * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1899 * pass before the routine returns.
1900 *
1901 * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1902 * delivered to the current task.
1903 *
1904 * The current task state is guaranteed to be TASK_RUNNING when this
1905 * routine returns.
1906 *
1907 * Returns 0 when the timer has expired otherwise -EINTR
1908 */
1909int __sched schedule_hrtimeout(ktime_t *expires,
1910 const enum hrtimer_mode mode)
1911{
1912 return schedule_hrtimeout_range(expires, 0, mode);
1913}
1914EXPORT_SYMBOL_GPL(schedule_hrtimeout);
1/*
2 * linux/kernel/hrtimer.c
3 *
4 * Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de>
5 * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar
6 * Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner
7 *
8 * High-resolution kernel timers
9 *
10 * In contrast to the low-resolution timeout API implemented in
11 * kernel/timer.c, hrtimers provide finer resolution and accuracy
12 * depending on system configuration and capabilities.
13 *
14 * These timers are currently used for:
15 * - itimers
16 * - POSIX timers
17 * - nanosleep
18 * - precise in-kernel timing
19 *
20 * Started by: Thomas Gleixner and Ingo Molnar
21 *
22 * Credits:
23 * based on kernel/timer.c
24 *
25 * Help, testing, suggestions, bugfixes, improvements were
26 * provided by:
27 *
28 * George Anzinger, Andrew Morton, Steven Rostedt, Roman Zippel
29 * et. al.
30 *
31 * For licencing details see kernel-base/COPYING
32 */
33
34#include <linux/cpu.h>
35#include <linux/module.h>
36#include <linux/percpu.h>
37#include <linux/hrtimer.h>
38#include <linux/notifier.h>
39#include <linux/syscalls.h>
40#include <linux/kallsyms.h>
41#include <linux/interrupt.h>
42#include <linux/tick.h>
43#include <linux/seq_file.h>
44#include <linux/err.h>
45#include <linux/debugobjects.h>
46#include <linux/sched.h>
47#include <linux/timer.h>
48
49#include <asm/uaccess.h>
50
51#include <trace/events/timer.h>
52
53/*
54 * The timer bases:
55 *
56 * There are more clockids then hrtimer bases. Thus, we index
57 * into the timer bases by the hrtimer_base_type enum. When trying
58 * to reach a base using a clockid, hrtimer_clockid_to_base()
59 * is used to convert from clockid to the proper hrtimer_base_type.
60 */
61DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
62{
63
64 .clock_base =
65 {
66 {
67 .index = HRTIMER_BASE_MONOTONIC,
68 .clockid = CLOCK_MONOTONIC,
69 .get_time = &ktime_get,
70 .resolution = KTIME_LOW_RES,
71 },
72 {
73 .index = HRTIMER_BASE_REALTIME,
74 .clockid = CLOCK_REALTIME,
75 .get_time = &ktime_get_real,
76 .resolution = KTIME_LOW_RES,
77 },
78 {
79 .index = HRTIMER_BASE_BOOTTIME,
80 .clockid = CLOCK_BOOTTIME,
81 .get_time = &ktime_get_boottime,
82 .resolution = KTIME_LOW_RES,
83 },
84 }
85};
86
87static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
88 [CLOCK_REALTIME] = HRTIMER_BASE_REALTIME,
89 [CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC,
90 [CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME,
91};
92
93static inline int hrtimer_clockid_to_base(clockid_t clock_id)
94{
95 return hrtimer_clock_to_base_table[clock_id];
96}
97
98
99/*
100 * Get the coarse grained time at the softirq based on xtime and
101 * wall_to_monotonic.
102 */
103static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
104{
105 ktime_t xtim, mono, boot;
106 struct timespec xts, tom, slp;
107
108 get_xtime_and_monotonic_and_sleep_offset(&xts, &tom, &slp);
109
110 xtim = timespec_to_ktime(xts);
111 mono = ktime_add(xtim, timespec_to_ktime(tom));
112 boot = ktime_add(mono, timespec_to_ktime(slp));
113 base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim;
114 base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono;
115 base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot;
116}
117
118/*
119 * Functions and macros which are different for UP/SMP systems are kept in a
120 * single place
121 */
122#ifdef CONFIG_SMP
123
124/*
125 * We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock
126 * means that all timers which are tied to this base via timer->base are
127 * locked, and the base itself is locked too.
128 *
129 * So __run_timers/migrate_timers can safely modify all timers which could
130 * be found on the lists/queues.
131 *
132 * When the timer's base is locked, and the timer removed from list, it is
133 * possible to set timer->base = NULL and drop the lock: the timer remains
134 * locked.
135 */
136static
137struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
138 unsigned long *flags)
139{
140 struct hrtimer_clock_base *base;
141
142 for (;;) {
143 base = timer->base;
144 if (likely(base != NULL)) {
145 raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
146 if (likely(base == timer->base))
147 return base;
148 /* The timer has migrated to another CPU: */
149 raw_spin_unlock_irqrestore(&base->cpu_base->lock, *flags);
150 }
151 cpu_relax();
152 }
153}
154
155
156/*
157 * Get the preferred target CPU for NOHZ
158 */
159static int hrtimer_get_target(int this_cpu, int pinned)
160{
161#ifdef CONFIG_NO_HZ
162 if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu))
163 return get_nohz_timer_target();
164#endif
165 return this_cpu;
166}
167
168/*
169 * With HIGHRES=y we do not migrate the timer when it is expiring
170 * before the next event on the target cpu because we cannot reprogram
171 * the target cpu hardware and we would cause it to fire late.
172 *
173 * Called with cpu_base->lock of target cpu held.
174 */
175static int
176hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
177{
178#ifdef CONFIG_HIGH_RES_TIMERS
179 ktime_t expires;
180
181 if (!new_base->cpu_base->hres_active)
182 return 0;
183
184 expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
185 return expires.tv64 <= new_base->cpu_base->expires_next.tv64;
186#else
187 return 0;
188#endif
189}
190
191/*
192 * Switch the timer base to the current CPU when possible.
193 */
194static inline struct hrtimer_clock_base *
195switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
196 int pinned)
197{
198 struct hrtimer_clock_base *new_base;
199 struct hrtimer_cpu_base *new_cpu_base;
200 int this_cpu = smp_processor_id();
201 int cpu = hrtimer_get_target(this_cpu, pinned);
202 int basenum = base->index;
203
204again:
205 new_cpu_base = &per_cpu(hrtimer_bases, cpu);
206 new_base = &new_cpu_base->clock_base[basenum];
207
208 if (base != new_base) {
209 /*
210 * We are trying to move timer to new_base.
211 * However we can't change timer's base while it is running,
212 * so we keep it on the same CPU. No hassle vs. reprogramming
213 * the event source in the high resolution case. The softirq
214 * code will take care of this when the timer function has
215 * completed. There is no conflict as we hold the lock until
216 * the timer is enqueued.
217 */
218 if (unlikely(hrtimer_callback_running(timer)))
219 return base;
220
221 /* See the comment in lock_timer_base() */
222 timer->base = NULL;
223 raw_spin_unlock(&base->cpu_base->lock);
224 raw_spin_lock(&new_base->cpu_base->lock);
225
226 if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
227 cpu = this_cpu;
228 raw_spin_unlock(&new_base->cpu_base->lock);
229 raw_spin_lock(&base->cpu_base->lock);
230 timer->base = base;
231 goto again;
232 }
233 timer->base = new_base;
234 }
235 return new_base;
236}
237
238#else /* CONFIG_SMP */
239
240static inline struct hrtimer_clock_base *
241lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
242{
243 struct hrtimer_clock_base *base = timer->base;
244
245 raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
246
247 return base;
248}
249
250# define switch_hrtimer_base(t, b, p) (b)
251
252#endif /* !CONFIG_SMP */
253
254/*
255 * Functions for the union type storage format of ktime_t which are
256 * too large for inlining:
257 */
258#if BITS_PER_LONG < 64
259# ifndef CONFIG_KTIME_SCALAR
260/**
261 * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
262 * @kt: addend
263 * @nsec: the scalar nsec value to add
264 *
265 * Returns the sum of kt and nsec in ktime_t format
266 */
267ktime_t ktime_add_ns(const ktime_t kt, u64 nsec)
268{
269 ktime_t tmp;
270
271 if (likely(nsec < NSEC_PER_SEC)) {
272 tmp.tv64 = nsec;
273 } else {
274 unsigned long rem = do_div(nsec, NSEC_PER_SEC);
275
276 tmp = ktime_set((long)nsec, rem);
277 }
278
279 return ktime_add(kt, tmp);
280}
281
282EXPORT_SYMBOL_GPL(ktime_add_ns);
283
284/**
285 * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
286 * @kt: minuend
287 * @nsec: the scalar nsec value to subtract
288 *
289 * Returns the subtraction of @nsec from @kt in ktime_t format
290 */
291ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec)
292{
293 ktime_t tmp;
294
295 if (likely(nsec < NSEC_PER_SEC)) {
296 tmp.tv64 = nsec;
297 } else {
298 unsigned long rem = do_div(nsec, NSEC_PER_SEC);
299
300 tmp = ktime_set((long)nsec, rem);
301 }
302
303 return ktime_sub(kt, tmp);
304}
305
306EXPORT_SYMBOL_GPL(ktime_sub_ns);
307# endif /* !CONFIG_KTIME_SCALAR */
308
309/*
310 * Divide a ktime value by a nanosecond value
311 */
312u64 ktime_divns(const ktime_t kt, s64 div)
313{
314 u64 dclc;
315 int sft = 0;
316
317 dclc = ktime_to_ns(kt);
318 /* Make sure the divisor is less than 2^32: */
319 while (div >> 32) {
320 sft++;
321 div >>= 1;
322 }
323 dclc >>= sft;
324 do_div(dclc, (unsigned long) div);
325
326 return dclc;
327}
328#endif /* BITS_PER_LONG >= 64 */
329
330/*
331 * Add two ktime values and do a safety check for overflow:
332 */
333ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs)
334{
335 ktime_t res = ktime_add(lhs, rhs);
336
337 /*
338 * We use KTIME_SEC_MAX here, the maximum timeout which we can
339 * return to user space in a timespec:
340 */
341 if (res.tv64 < 0 || res.tv64 < lhs.tv64 || res.tv64 < rhs.tv64)
342 res = ktime_set(KTIME_SEC_MAX, 0);
343
344 return res;
345}
346
347EXPORT_SYMBOL_GPL(ktime_add_safe);
348
349#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
350
351static struct debug_obj_descr hrtimer_debug_descr;
352
353static void *hrtimer_debug_hint(void *addr)
354{
355 return ((struct hrtimer *) addr)->function;
356}
357
358/*
359 * fixup_init is called when:
360 * - an active object is initialized
361 */
362static int hrtimer_fixup_init(void *addr, enum debug_obj_state state)
363{
364 struct hrtimer *timer = addr;
365
366 switch (state) {
367 case ODEBUG_STATE_ACTIVE:
368 hrtimer_cancel(timer);
369 debug_object_init(timer, &hrtimer_debug_descr);
370 return 1;
371 default:
372 return 0;
373 }
374}
375
376/*
377 * fixup_activate is called when:
378 * - an active object is activated
379 * - an unknown object is activated (might be a statically initialized object)
380 */
381static int hrtimer_fixup_activate(void *addr, enum debug_obj_state state)
382{
383 switch (state) {
384
385 case ODEBUG_STATE_NOTAVAILABLE:
386 WARN_ON_ONCE(1);
387 return 0;
388
389 case ODEBUG_STATE_ACTIVE:
390 WARN_ON(1);
391
392 default:
393 return 0;
394 }
395}
396
397/*
398 * fixup_free is called when:
399 * - an active object is freed
400 */
401static int hrtimer_fixup_free(void *addr, enum debug_obj_state state)
402{
403 struct hrtimer *timer = addr;
404
405 switch (state) {
406 case ODEBUG_STATE_ACTIVE:
407 hrtimer_cancel(timer);
408 debug_object_free(timer, &hrtimer_debug_descr);
409 return 1;
410 default:
411 return 0;
412 }
413}
414
415static struct debug_obj_descr hrtimer_debug_descr = {
416 .name = "hrtimer",
417 .debug_hint = hrtimer_debug_hint,
418 .fixup_init = hrtimer_fixup_init,
419 .fixup_activate = hrtimer_fixup_activate,
420 .fixup_free = hrtimer_fixup_free,
421};
422
423static inline void debug_hrtimer_init(struct hrtimer *timer)
424{
425 debug_object_init(timer, &hrtimer_debug_descr);
426}
427
428static inline void debug_hrtimer_activate(struct hrtimer *timer)
429{
430 debug_object_activate(timer, &hrtimer_debug_descr);
431}
432
433static inline void debug_hrtimer_deactivate(struct hrtimer *timer)
434{
435 debug_object_deactivate(timer, &hrtimer_debug_descr);
436}
437
438static inline void debug_hrtimer_free(struct hrtimer *timer)
439{
440 debug_object_free(timer, &hrtimer_debug_descr);
441}
442
443static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
444 enum hrtimer_mode mode);
445
446void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t clock_id,
447 enum hrtimer_mode mode)
448{
449 debug_object_init_on_stack(timer, &hrtimer_debug_descr);
450 __hrtimer_init(timer, clock_id, mode);
451}
452EXPORT_SYMBOL_GPL(hrtimer_init_on_stack);
453
454void destroy_hrtimer_on_stack(struct hrtimer *timer)
455{
456 debug_object_free(timer, &hrtimer_debug_descr);
457}
458
459#else
460static inline void debug_hrtimer_init(struct hrtimer *timer) { }
461static inline void debug_hrtimer_activate(struct hrtimer *timer) { }
462static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { }
463#endif
464
465static inline void
466debug_init(struct hrtimer *timer, clockid_t clockid,
467 enum hrtimer_mode mode)
468{
469 debug_hrtimer_init(timer);
470 trace_hrtimer_init(timer, clockid, mode);
471}
472
473static inline void debug_activate(struct hrtimer *timer)
474{
475 debug_hrtimer_activate(timer);
476 trace_hrtimer_start(timer);
477}
478
479static inline void debug_deactivate(struct hrtimer *timer)
480{
481 debug_hrtimer_deactivate(timer);
482 trace_hrtimer_cancel(timer);
483}
484
485/* High resolution timer related functions */
486#ifdef CONFIG_HIGH_RES_TIMERS
487
488/*
489 * High resolution timer enabled ?
490 */
491static int hrtimer_hres_enabled __read_mostly = 1;
492
493/*
494 * Enable / Disable high resolution mode
495 */
496static int __init setup_hrtimer_hres(char *str)
497{
498 if (!strcmp(str, "off"))
499 hrtimer_hres_enabled = 0;
500 else if (!strcmp(str, "on"))
501 hrtimer_hres_enabled = 1;
502 else
503 return 0;
504 return 1;
505}
506
507__setup("highres=", setup_hrtimer_hres);
508
509/*
510 * hrtimer_high_res_enabled - query, if the highres mode is enabled
511 */
512static inline int hrtimer_is_hres_enabled(void)
513{
514 return hrtimer_hres_enabled;
515}
516
517/*
518 * Is the high resolution mode active ?
519 */
520static inline int hrtimer_hres_active(void)
521{
522 return __this_cpu_read(hrtimer_bases.hres_active);
523}
524
525/*
526 * Reprogram the event source with checking both queues for the
527 * next event
528 * Called with interrupts disabled and base->lock held
529 */
530static void
531hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
532{
533 int i;
534 struct hrtimer_clock_base *base = cpu_base->clock_base;
535 ktime_t expires, expires_next;
536
537 expires_next.tv64 = KTIME_MAX;
538
539 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
540 struct hrtimer *timer;
541 struct timerqueue_node *next;
542
543 next = timerqueue_getnext(&base->active);
544 if (!next)
545 continue;
546 timer = container_of(next, struct hrtimer, node);
547
548 expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
549 /*
550 * clock_was_set() has changed base->offset so the
551 * result might be negative. Fix it up to prevent a
552 * false positive in clockevents_program_event()
553 */
554 if (expires.tv64 < 0)
555 expires.tv64 = 0;
556 if (expires.tv64 < expires_next.tv64)
557 expires_next = expires;
558 }
559
560 if (skip_equal && expires_next.tv64 == cpu_base->expires_next.tv64)
561 return;
562
563 cpu_base->expires_next.tv64 = expires_next.tv64;
564
565 if (cpu_base->expires_next.tv64 != KTIME_MAX)
566 tick_program_event(cpu_base->expires_next, 1);
567}
568
569/*
570 * Shared reprogramming for clock_realtime and clock_monotonic
571 *
572 * When a timer is enqueued and expires earlier than the already enqueued
573 * timers, we have to check, whether it expires earlier than the timer for
574 * which the clock event device was armed.
575 *
576 * Called with interrupts disabled and base->cpu_base.lock held
577 */
578static int hrtimer_reprogram(struct hrtimer *timer,
579 struct hrtimer_clock_base *base)
580{
581 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
582 ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
583 int res;
584
585 WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0);
586
587 /*
588 * When the callback is running, we do not reprogram the clock event
589 * device. The timer callback is either running on a different CPU or
590 * the callback is executed in the hrtimer_interrupt context. The
591 * reprogramming is handled either by the softirq, which called the
592 * callback or at the end of the hrtimer_interrupt.
593 */
594 if (hrtimer_callback_running(timer))
595 return 0;
596
597 /*
598 * CLOCK_REALTIME timer might be requested with an absolute
599 * expiry time which is less than base->offset. Nothing wrong
600 * about that, just avoid to call into the tick code, which
601 * has now objections against negative expiry values.
602 */
603 if (expires.tv64 < 0)
604 return -ETIME;
605
606 if (expires.tv64 >= cpu_base->expires_next.tv64)
607 return 0;
608
609 /*
610 * If a hang was detected in the last timer interrupt then we
611 * do not schedule a timer which is earlier than the expiry
612 * which we enforced in the hang detection. We want the system
613 * to make progress.
614 */
615 if (cpu_base->hang_detected)
616 return 0;
617
618 /*
619 * Clockevents returns -ETIME, when the event was in the past.
620 */
621 res = tick_program_event(expires, 0);
622 if (!IS_ERR_VALUE(res))
623 cpu_base->expires_next = expires;
624 return res;
625}
626
627/*
628 * Initialize the high resolution related parts of cpu_base
629 */
630static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base)
631{
632 base->expires_next.tv64 = KTIME_MAX;
633 base->hres_active = 0;
634}
635
636/*
637 * When High resolution timers are active, try to reprogram. Note, that in case
638 * the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry
639 * check happens. The timer gets enqueued into the rbtree. The reprogramming
640 * and expiry check is done in the hrtimer_interrupt or in the softirq.
641 */
642static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
643 struct hrtimer_clock_base *base,
644 int wakeup)
645{
646 if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) {
647 if (wakeup) {
648 raw_spin_unlock(&base->cpu_base->lock);
649 raise_softirq_irqoff(HRTIMER_SOFTIRQ);
650 raw_spin_lock(&base->cpu_base->lock);
651 } else
652 __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
653
654 return 1;
655 }
656
657 return 0;
658}
659
660/*
661 * Retrigger next event is called after clock was set
662 *
663 * Called with interrupts disabled via on_each_cpu()
664 */
665static void retrigger_next_event(void *arg)
666{
667 struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
668 struct timespec realtime_offset, xtim, wtm, sleep;
669
670 if (!hrtimer_hres_active())
671 return;
672
673 /* Optimized out for !HIGH_RES */
674 get_xtime_and_monotonic_and_sleep_offset(&xtim, &wtm, &sleep);
675 set_normalized_timespec(&realtime_offset, -wtm.tv_sec, -wtm.tv_nsec);
676
677 /* Adjust CLOCK_REALTIME offset */
678 raw_spin_lock(&base->lock);
679 base->clock_base[HRTIMER_BASE_REALTIME].offset =
680 timespec_to_ktime(realtime_offset);
681 base->clock_base[HRTIMER_BASE_BOOTTIME].offset =
682 timespec_to_ktime(sleep);
683
684 hrtimer_force_reprogram(base, 0);
685 raw_spin_unlock(&base->lock);
686}
687
688/*
689 * Switch to high resolution mode
690 */
691static int hrtimer_switch_to_hres(void)
692{
693 int i, cpu = smp_processor_id();
694 struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu);
695 unsigned long flags;
696
697 if (base->hres_active)
698 return 1;
699
700 local_irq_save(flags);
701
702 if (tick_init_highres()) {
703 local_irq_restore(flags);
704 printk(KERN_WARNING "Could not switch to high resolution "
705 "mode on CPU %d\n", cpu);
706 return 0;
707 }
708 base->hres_active = 1;
709 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
710 base->clock_base[i].resolution = KTIME_HIGH_RES;
711
712 tick_setup_sched_timer();
713
714 /* "Retrigger" the interrupt to get things going */
715 retrigger_next_event(NULL);
716 local_irq_restore(flags);
717 return 1;
718}
719
720#else
721
722static inline int hrtimer_hres_active(void) { return 0; }
723static inline int hrtimer_is_hres_enabled(void) { return 0; }
724static inline int hrtimer_switch_to_hres(void) { return 0; }
725static inline void
726hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
727static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
728 struct hrtimer_clock_base *base,
729 int wakeup)
730{
731 return 0;
732}
733static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) { }
734static inline void retrigger_next_event(void *arg) { }
735
736#endif /* CONFIG_HIGH_RES_TIMERS */
737
738/*
739 * Clock realtime was set
740 *
741 * Change the offset of the realtime clock vs. the monotonic
742 * clock.
743 *
744 * We might have to reprogram the high resolution timer interrupt. On
745 * SMP we call the architecture specific code to retrigger _all_ high
746 * resolution timer interrupts. On UP we just disable interrupts and
747 * call the high resolution interrupt code.
748 */
749void clock_was_set(void)
750{
751#ifdef CONFIG_HIGH_RES_TIMERS
752 /* Retrigger the CPU local events everywhere */
753 on_each_cpu(retrigger_next_event, NULL, 1);
754#endif
755 timerfd_clock_was_set();
756}
757
758/*
759 * During resume we might have to reprogram the high resolution timer
760 * interrupt (on the local CPU):
761 */
762void hrtimers_resume(void)
763{
764 WARN_ONCE(!irqs_disabled(),
765 KERN_INFO "hrtimers_resume() called with IRQs enabled!");
766
767 retrigger_next_event(NULL);
768 timerfd_clock_was_set();
769}
770
771static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
772{
773#ifdef CONFIG_TIMER_STATS
774 if (timer->start_site)
775 return;
776 timer->start_site = __builtin_return_address(0);
777 memcpy(timer->start_comm, current->comm, TASK_COMM_LEN);
778 timer->start_pid = current->pid;
779#endif
780}
781
782static inline void timer_stats_hrtimer_clear_start_info(struct hrtimer *timer)
783{
784#ifdef CONFIG_TIMER_STATS
785 timer->start_site = NULL;
786#endif
787}
788
789static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
790{
791#ifdef CONFIG_TIMER_STATS
792 if (likely(!timer_stats_active))
793 return;
794 timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
795 timer->function, timer->start_comm, 0);
796#endif
797}
798
799/*
800 * Counterpart to lock_hrtimer_base above:
801 */
802static inline
803void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
804{
805 raw_spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags);
806}
807
808/**
809 * hrtimer_forward - forward the timer expiry
810 * @timer: hrtimer to forward
811 * @now: forward past this time
812 * @interval: the interval to forward
813 *
814 * Forward the timer expiry so it will expire in the future.
815 * Returns the number of overruns.
816 */
817u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
818{
819 u64 orun = 1;
820 ktime_t delta;
821
822 delta = ktime_sub(now, hrtimer_get_expires(timer));
823
824 if (delta.tv64 < 0)
825 return 0;
826
827 if (interval.tv64 < timer->base->resolution.tv64)
828 interval.tv64 = timer->base->resolution.tv64;
829
830 if (unlikely(delta.tv64 >= interval.tv64)) {
831 s64 incr = ktime_to_ns(interval);
832
833 orun = ktime_divns(delta, incr);
834 hrtimer_add_expires_ns(timer, incr * orun);
835 if (hrtimer_get_expires_tv64(timer) > now.tv64)
836 return orun;
837 /*
838 * This (and the ktime_add() below) is the
839 * correction for exact:
840 */
841 orun++;
842 }
843 hrtimer_add_expires(timer, interval);
844
845 return orun;
846}
847EXPORT_SYMBOL_GPL(hrtimer_forward);
848
849/*
850 * enqueue_hrtimer - internal function to (re)start a timer
851 *
852 * The timer is inserted in expiry order. Insertion into the
853 * red black tree is O(log(n)). Must hold the base lock.
854 *
855 * Returns 1 when the new timer is the leftmost timer in the tree.
856 */
857static int enqueue_hrtimer(struct hrtimer *timer,
858 struct hrtimer_clock_base *base)
859{
860 debug_activate(timer);
861
862 timerqueue_add(&base->active, &timer->node);
863 base->cpu_base->active_bases |= 1 << base->index;
864
865 /*
866 * HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the
867 * state of a possibly running callback.
868 */
869 timer->state |= HRTIMER_STATE_ENQUEUED;
870
871 return (&timer->node == base->active.next);
872}
873
874/*
875 * __remove_hrtimer - internal function to remove a timer
876 *
877 * Caller must hold the base lock.
878 *
879 * High resolution timer mode reprograms the clock event device when the
880 * timer is the one which expires next. The caller can disable this by setting
881 * reprogram to zero. This is useful, when the context does a reprogramming
882 * anyway (e.g. timer interrupt)
883 */
884static void __remove_hrtimer(struct hrtimer *timer,
885 struct hrtimer_clock_base *base,
886 unsigned long newstate, int reprogram)
887{
888 if (!(timer->state & HRTIMER_STATE_ENQUEUED))
889 goto out;
890
891 if (&timer->node == timerqueue_getnext(&base->active)) {
892#ifdef CONFIG_HIGH_RES_TIMERS
893 /* Reprogram the clock event device. if enabled */
894 if (reprogram && hrtimer_hres_active()) {
895 ktime_t expires;
896
897 expires = ktime_sub(hrtimer_get_expires(timer),
898 base->offset);
899 if (base->cpu_base->expires_next.tv64 == expires.tv64)
900 hrtimer_force_reprogram(base->cpu_base, 1);
901 }
902#endif
903 }
904 timerqueue_del(&base->active, &timer->node);
905 if (!timerqueue_getnext(&base->active))
906 base->cpu_base->active_bases &= ~(1 << base->index);
907out:
908 timer->state = newstate;
909}
910
911/*
912 * remove hrtimer, called with base lock held
913 */
914static inline int
915remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
916{
917 if (hrtimer_is_queued(timer)) {
918 unsigned long state;
919 int reprogram;
920
921 /*
922 * Remove the timer and force reprogramming when high
923 * resolution mode is active and the timer is on the current
924 * CPU. If we remove a timer on another CPU, reprogramming is
925 * skipped. The interrupt event on this CPU is fired and
926 * reprogramming happens in the interrupt handler. This is a
927 * rare case and less expensive than a smp call.
928 */
929 debug_deactivate(timer);
930 timer_stats_hrtimer_clear_start_info(timer);
931 reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases);
932 /*
933 * We must preserve the CALLBACK state flag here,
934 * otherwise we could move the timer base in
935 * switch_hrtimer_base.
936 */
937 state = timer->state & HRTIMER_STATE_CALLBACK;
938 __remove_hrtimer(timer, base, state, reprogram);
939 return 1;
940 }
941 return 0;
942}
943
944int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
945 unsigned long delta_ns, const enum hrtimer_mode mode,
946 int wakeup)
947{
948 struct hrtimer_clock_base *base, *new_base;
949 unsigned long flags;
950 int ret, leftmost;
951
952 base = lock_hrtimer_base(timer, &flags);
953
954 /* Remove an active timer from the queue: */
955 ret = remove_hrtimer(timer, base);
956
957 /* Switch the timer base, if necessary: */
958 new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
959
960 if (mode & HRTIMER_MODE_REL) {
961 tim = ktime_add_safe(tim, new_base->get_time());
962 /*
963 * CONFIG_TIME_LOW_RES is a temporary way for architectures
964 * to signal that they simply return xtime in
965 * do_gettimeoffset(). In this case we want to round up by
966 * resolution when starting a relative timer, to avoid short
967 * timeouts. This will go away with the GTOD framework.
968 */
969#ifdef CONFIG_TIME_LOW_RES
970 tim = ktime_add_safe(tim, base->resolution);
971#endif
972 }
973
974 hrtimer_set_expires_range_ns(timer, tim, delta_ns);
975
976 timer_stats_hrtimer_set_start_info(timer);
977
978 leftmost = enqueue_hrtimer(timer, new_base);
979
980 /*
981 * Only allow reprogramming if the new base is on this CPU.
982 * (it might still be on another CPU if the timer was pending)
983 *
984 * XXX send_remote_softirq() ?
985 */
986 if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases))
987 hrtimer_enqueue_reprogram(timer, new_base, wakeup);
988
989 unlock_hrtimer_base(timer, &flags);
990
991 return ret;
992}
993
994/**
995 * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
996 * @timer: the timer to be added
997 * @tim: expiry time
998 * @delta_ns: "slack" range for the timer
999 * @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
1000 *
1001 * Returns:
1002 * 0 on success
1003 * 1 when the timer was active
1004 */
1005int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
1006 unsigned long delta_ns, const enum hrtimer_mode mode)
1007{
1008 return __hrtimer_start_range_ns(timer, tim, delta_ns, mode, 1);
1009}
1010EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
1011
1012/**
1013 * hrtimer_start - (re)start an hrtimer on the current CPU
1014 * @timer: the timer to be added
1015 * @tim: expiry time
1016 * @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
1017 *
1018 * Returns:
1019 * 0 on success
1020 * 1 when the timer was active
1021 */
1022int
1023hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
1024{
1025 return __hrtimer_start_range_ns(timer, tim, 0, mode, 1);
1026}
1027EXPORT_SYMBOL_GPL(hrtimer_start);
1028
1029
1030/**
1031 * hrtimer_try_to_cancel - try to deactivate a timer
1032 * @timer: hrtimer to stop
1033 *
1034 * Returns:
1035 * 0 when the timer was not active
1036 * 1 when the timer was active
1037 * -1 when the timer is currently excuting the callback function and
1038 * cannot be stopped
1039 */
1040int hrtimer_try_to_cancel(struct hrtimer *timer)
1041{
1042 struct hrtimer_clock_base *base;
1043 unsigned long flags;
1044 int ret = -1;
1045
1046 base = lock_hrtimer_base(timer, &flags);
1047
1048 if (!hrtimer_callback_running(timer))
1049 ret = remove_hrtimer(timer, base);
1050
1051 unlock_hrtimer_base(timer, &flags);
1052
1053 return ret;
1054
1055}
1056EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel);
1057
1058/**
1059 * hrtimer_cancel - cancel a timer and wait for the handler to finish.
1060 * @timer: the timer to be cancelled
1061 *
1062 * Returns:
1063 * 0 when the timer was not active
1064 * 1 when the timer was active
1065 */
1066int hrtimer_cancel(struct hrtimer *timer)
1067{
1068 for (;;) {
1069 int ret = hrtimer_try_to_cancel(timer);
1070
1071 if (ret >= 0)
1072 return ret;
1073 cpu_relax();
1074 }
1075}
1076EXPORT_SYMBOL_GPL(hrtimer_cancel);
1077
1078/**
1079 * hrtimer_get_remaining - get remaining time for the timer
1080 * @timer: the timer to read
1081 */
1082ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
1083{
1084 unsigned long flags;
1085 ktime_t rem;
1086
1087 lock_hrtimer_base(timer, &flags);
1088 rem = hrtimer_expires_remaining(timer);
1089 unlock_hrtimer_base(timer, &flags);
1090
1091 return rem;
1092}
1093EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
1094
1095#ifdef CONFIG_NO_HZ
1096/**
1097 * hrtimer_get_next_event - get the time until next expiry event
1098 *
1099 * Returns the delta to the next expiry event or KTIME_MAX if no timer
1100 * is pending.
1101 */
1102ktime_t hrtimer_get_next_event(void)
1103{
1104 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1105 struct hrtimer_clock_base *base = cpu_base->clock_base;
1106 ktime_t delta, mindelta = { .tv64 = KTIME_MAX };
1107 unsigned long flags;
1108 int i;
1109
1110 raw_spin_lock_irqsave(&cpu_base->lock, flags);
1111
1112 if (!hrtimer_hres_active()) {
1113 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
1114 struct hrtimer *timer;
1115 struct timerqueue_node *next;
1116
1117 next = timerqueue_getnext(&base->active);
1118 if (!next)
1119 continue;
1120
1121 timer = container_of(next, struct hrtimer, node);
1122 delta.tv64 = hrtimer_get_expires_tv64(timer);
1123 delta = ktime_sub(delta, base->get_time());
1124 if (delta.tv64 < mindelta.tv64)
1125 mindelta.tv64 = delta.tv64;
1126 }
1127 }
1128
1129 raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
1130
1131 if (mindelta.tv64 < 0)
1132 mindelta.tv64 = 0;
1133 return mindelta;
1134}
1135#endif
1136
1137static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1138 enum hrtimer_mode mode)
1139{
1140 struct hrtimer_cpu_base *cpu_base;
1141 int base;
1142
1143 memset(timer, 0, sizeof(struct hrtimer));
1144
1145 cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1146
1147 if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS)
1148 clock_id = CLOCK_MONOTONIC;
1149
1150 base = hrtimer_clockid_to_base(clock_id);
1151 timer->base = &cpu_base->clock_base[base];
1152 timerqueue_init(&timer->node);
1153
1154#ifdef CONFIG_TIMER_STATS
1155 timer->start_site = NULL;
1156 timer->start_pid = -1;
1157 memset(timer->start_comm, 0, TASK_COMM_LEN);
1158#endif
1159}
1160
1161/**
1162 * hrtimer_init - initialize a timer to the given clock
1163 * @timer: the timer to be initialized
1164 * @clock_id: the clock to be used
1165 * @mode: timer mode abs/rel
1166 */
1167void hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1168 enum hrtimer_mode mode)
1169{
1170 debug_init(timer, clock_id, mode);
1171 __hrtimer_init(timer, clock_id, mode);
1172}
1173EXPORT_SYMBOL_GPL(hrtimer_init);
1174
1175/**
1176 * hrtimer_get_res - get the timer resolution for a clock
1177 * @which_clock: which clock to query
1178 * @tp: pointer to timespec variable to store the resolution
1179 *
1180 * Store the resolution of the clock selected by @which_clock in the
1181 * variable pointed to by @tp.
1182 */
1183int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp)
1184{
1185 struct hrtimer_cpu_base *cpu_base;
1186 int base = hrtimer_clockid_to_base(which_clock);
1187
1188 cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1189 *tp = ktime_to_timespec(cpu_base->clock_base[base].resolution);
1190
1191 return 0;
1192}
1193EXPORT_SYMBOL_GPL(hrtimer_get_res);
1194
1195static void __run_hrtimer(struct hrtimer *timer, ktime_t *now)
1196{
1197 struct hrtimer_clock_base *base = timer->base;
1198 struct hrtimer_cpu_base *cpu_base = base->cpu_base;
1199 enum hrtimer_restart (*fn)(struct hrtimer *);
1200 int restart;
1201
1202 WARN_ON(!irqs_disabled());
1203
1204 debug_deactivate(timer);
1205 __remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0);
1206 timer_stats_account_hrtimer(timer);
1207 fn = timer->function;
1208
1209 /*
1210 * Because we run timers from hardirq context, there is no chance
1211 * they get migrated to another cpu, therefore its safe to unlock
1212 * the timer base.
1213 */
1214 raw_spin_unlock(&cpu_base->lock);
1215 trace_hrtimer_expire_entry(timer, now);
1216 restart = fn(timer);
1217 trace_hrtimer_expire_exit(timer);
1218 raw_spin_lock(&cpu_base->lock);
1219
1220 /*
1221 * Note: We clear the CALLBACK bit after enqueue_hrtimer and
1222 * we do not reprogramm the event hardware. Happens either in
1223 * hrtimer_start_range_ns() or in hrtimer_interrupt()
1224 */
1225 if (restart != HRTIMER_NORESTART) {
1226 BUG_ON(timer->state != HRTIMER_STATE_CALLBACK);
1227 enqueue_hrtimer(timer, base);
1228 }
1229
1230 WARN_ON_ONCE(!(timer->state & HRTIMER_STATE_CALLBACK));
1231
1232 timer->state &= ~HRTIMER_STATE_CALLBACK;
1233}
1234
1235#ifdef CONFIG_HIGH_RES_TIMERS
1236
1237/*
1238 * High resolution timer interrupt
1239 * Called with interrupts disabled
1240 */
1241void hrtimer_interrupt(struct clock_event_device *dev)
1242{
1243 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1244 ktime_t expires_next, now, entry_time, delta;
1245 int i, retries = 0;
1246
1247 BUG_ON(!cpu_base->hres_active);
1248 cpu_base->nr_events++;
1249 dev->next_event.tv64 = KTIME_MAX;
1250
1251 entry_time = now = ktime_get();
1252retry:
1253 expires_next.tv64 = KTIME_MAX;
1254
1255 raw_spin_lock(&cpu_base->lock);
1256 /*
1257 * We set expires_next to KTIME_MAX here with cpu_base->lock
1258 * held to prevent that a timer is enqueued in our queue via
1259 * the migration code. This does not affect enqueueing of
1260 * timers which run their callback and need to be requeued on
1261 * this CPU.
1262 */
1263 cpu_base->expires_next.tv64 = KTIME_MAX;
1264
1265 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1266 struct hrtimer_clock_base *base;
1267 struct timerqueue_node *node;
1268 ktime_t basenow;
1269
1270 if (!(cpu_base->active_bases & (1 << i)))
1271 continue;
1272
1273 base = cpu_base->clock_base + i;
1274 basenow = ktime_add(now, base->offset);
1275
1276 while ((node = timerqueue_getnext(&base->active))) {
1277 struct hrtimer *timer;
1278
1279 timer = container_of(node, struct hrtimer, node);
1280
1281 /*
1282 * The immediate goal for using the softexpires is
1283 * minimizing wakeups, not running timers at the
1284 * earliest interrupt after their soft expiration.
1285 * This allows us to avoid using a Priority Search
1286 * Tree, which can answer a stabbing querry for
1287 * overlapping intervals and instead use the simple
1288 * BST we already have.
1289 * We don't add extra wakeups by delaying timers that
1290 * are right-of a not yet expired timer, because that
1291 * timer will have to trigger a wakeup anyway.
1292 */
1293
1294 if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) {
1295 ktime_t expires;
1296
1297 expires = ktime_sub(hrtimer_get_expires(timer),
1298 base->offset);
1299 if (expires.tv64 < expires_next.tv64)
1300 expires_next = expires;
1301 break;
1302 }
1303
1304 __run_hrtimer(timer, &basenow);
1305 }
1306 }
1307
1308 /*
1309 * Store the new expiry value so the migration code can verify
1310 * against it.
1311 */
1312 cpu_base->expires_next = expires_next;
1313 raw_spin_unlock(&cpu_base->lock);
1314
1315 /* Reprogramming necessary ? */
1316 if (expires_next.tv64 == KTIME_MAX ||
1317 !tick_program_event(expires_next, 0)) {
1318 cpu_base->hang_detected = 0;
1319 return;
1320 }
1321
1322 /*
1323 * The next timer was already expired due to:
1324 * - tracing
1325 * - long lasting callbacks
1326 * - being scheduled away when running in a VM
1327 *
1328 * We need to prevent that we loop forever in the hrtimer
1329 * interrupt routine. We give it 3 attempts to avoid
1330 * overreacting on some spurious event.
1331 */
1332 now = ktime_get();
1333 cpu_base->nr_retries++;
1334 if (++retries < 3)
1335 goto retry;
1336 /*
1337 * Give the system a chance to do something else than looping
1338 * here. We stored the entry time, so we know exactly how long
1339 * we spent here. We schedule the next event this amount of
1340 * time away.
1341 */
1342 cpu_base->nr_hangs++;
1343 cpu_base->hang_detected = 1;
1344 delta = ktime_sub(now, entry_time);
1345 if (delta.tv64 > cpu_base->max_hang_time.tv64)
1346 cpu_base->max_hang_time = delta;
1347 /*
1348 * Limit it to a sensible value as we enforce a longer
1349 * delay. Give the CPU at least 100ms to catch up.
1350 */
1351 if (delta.tv64 > 100 * NSEC_PER_MSEC)
1352 expires_next = ktime_add_ns(now, 100 * NSEC_PER_MSEC);
1353 else
1354 expires_next = ktime_add(now, delta);
1355 tick_program_event(expires_next, 1);
1356 printk_once(KERN_WARNING "hrtimer: interrupt took %llu ns\n",
1357 ktime_to_ns(delta));
1358}
1359
1360/*
1361 * local version of hrtimer_peek_ahead_timers() called with interrupts
1362 * disabled.
1363 */
1364static void __hrtimer_peek_ahead_timers(void)
1365{
1366 struct tick_device *td;
1367
1368 if (!hrtimer_hres_active())
1369 return;
1370
1371 td = &__get_cpu_var(tick_cpu_device);
1372 if (td && td->evtdev)
1373 hrtimer_interrupt(td->evtdev);
1374}
1375
1376/**
1377 * hrtimer_peek_ahead_timers -- run soft-expired timers now
1378 *
1379 * hrtimer_peek_ahead_timers will peek at the timer queue of
1380 * the current cpu and check if there are any timers for which
1381 * the soft expires time has passed. If any such timers exist,
1382 * they are run immediately and then removed from the timer queue.
1383 *
1384 */
1385void hrtimer_peek_ahead_timers(void)
1386{
1387 unsigned long flags;
1388
1389 local_irq_save(flags);
1390 __hrtimer_peek_ahead_timers();
1391 local_irq_restore(flags);
1392}
1393
1394static void run_hrtimer_softirq(struct softirq_action *h)
1395{
1396 hrtimer_peek_ahead_timers();
1397}
1398
1399#else /* CONFIG_HIGH_RES_TIMERS */
1400
1401static inline void __hrtimer_peek_ahead_timers(void) { }
1402
1403#endif /* !CONFIG_HIGH_RES_TIMERS */
1404
1405/*
1406 * Called from timer softirq every jiffy, expire hrtimers:
1407 *
1408 * For HRT its the fall back code to run the softirq in the timer
1409 * softirq context in case the hrtimer initialization failed or has
1410 * not been done yet.
1411 */
1412void hrtimer_run_pending(void)
1413{
1414 if (hrtimer_hres_active())
1415 return;
1416
1417 /*
1418 * This _is_ ugly: We have to check in the softirq context,
1419 * whether we can switch to highres and / or nohz mode. The
1420 * clocksource switch happens in the timer interrupt with
1421 * xtime_lock held. Notification from there only sets the
1422 * check bit in the tick_oneshot code, otherwise we might
1423 * deadlock vs. xtime_lock.
1424 */
1425 if (tick_check_oneshot_change(!hrtimer_is_hres_enabled()))
1426 hrtimer_switch_to_hres();
1427}
1428
1429/*
1430 * Called from hardirq context every jiffy
1431 */
1432void hrtimer_run_queues(void)
1433{
1434 struct timerqueue_node *node;
1435 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1436 struct hrtimer_clock_base *base;
1437 int index, gettime = 1;
1438
1439 if (hrtimer_hres_active())
1440 return;
1441
1442 for (index = 0; index < HRTIMER_MAX_CLOCK_BASES; index++) {
1443 base = &cpu_base->clock_base[index];
1444 if (!timerqueue_getnext(&base->active))
1445 continue;
1446
1447 if (gettime) {
1448 hrtimer_get_softirq_time(cpu_base);
1449 gettime = 0;
1450 }
1451
1452 raw_spin_lock(&cpu_base->lock);
1453
1454 while ((node = timerqueue_getnext(&base->active))) {
1455 struct hrtimer *timer;
1456
1457 timer = container_of(node, struct hrtimer, node);
1458 if (base->softirq_time.tv64 <=
1459 hrtimer_get_expires_tv64(timer))
1460 break;
1461
1462 __run_hrtimer(timer, &base->softirq_time);
1463 }
1464 raw_spin_unlock(&cpu_base->lock);
1465 }
1466}
1467
1468/*
1469 * Sleep related functions:
1470 */
1471static enum hrtimer_restart hrtimer_wakeup(struct hrtimer *timer)
1472{
1473 struct hrtimer_sleeper *t =
1474 container_of(timer, struct hrtimer_sleeper, timer);
1475 struct task_struct *task = t->task;
1476
1477 t->task = NULL;
1478 if (task)
1479 wake_up_process(task);
1480
1481 return HRTIMER_NORESTART;
1482}
1483
1484void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task)
1485{
1486 sl->timer.function = hrtimer_wakeup;
1487 sl->task = task;
1488}
1489EXPORT_SYMBOL_GPL(hrtimer_init_sleeper);
1490
1491static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
1492{
1493 hrtimer_init_sleeper(t, current);
1494
1495 do {
1496 set_current_state(TASK_INTERRUPTIBLE);
1497 hrtimer_start_expires(&t->timer, mode);
1498 if (!hrtimer_active(&t->timer))
1499 t->task = NULL;
1500
1501 if (likely(t->task))
1502 schedule();
1503
1504 hrtimer_cancel(&t->timer);
1505 mode = HRTIMER_MODE_ABS;
1506
1507 } while (t->task && !signal_pending(current));
1508
1509 __set_current_state(TASK_RUNNING);
1510
1511 return t->task == NULL;
1512}
1513
1514static int update_rmtp(struct hrtimer *timer, struct timespec __user *rmtp)
1515{
1516 struct timespec rmt;
1517 ktime_t rem;
1518
1519 rem = hrtimer_expires_remaining(timer);
1520 if (rem.tv64 <= 0)
1521 return 0;
1522 rmt = ktime_to_timespec(rem);
1523
1524 if (copy_to_user(rmtp, &rmt, sizeof(*rmtp)))
1525 return -EFAULT;
1526
1527 return 1;
1528}
1529
1530long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
1531{
1532 struct hrtimer_sleeper t;
1533 struct timespec __user *rmtp;
1534 int ret = 0;
1535
1536 hrtimer_init_on_stack(&t.timer, restart->nanosleep.clockid,
1537 HRTIMER_MODE_ABS);
1538 hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
1539
1540 if (do_nanosleep(&t, HRTIMER_MODE_ABS))
1541 goto out;
1542
1543 rmtp = restart->nanosleep.rmtp;
1544 if (rmtp) {
1545 ret = update_rmtp(&t.timer, rmtp);
1546 if (ret <= 0)
1547 goto out;
1548 }
1549
1550 /* The other values in restart are already filled in */
1551 ret = -ERESTART_RESTARTBLOCK;
1552out:
1553 destroy_hrtimer_on_stack(&t.timer);
1554 return ret;
1555}
1556
1557long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp,
1558 const enum hrtimer_mode mode, const clockid_t clockid)
1559{
1560 struct restart_block *restart;
1561 struct hrtimer_sleeper t;
1562 int ret = 0;
1563 unsigned long slack;
1564
1565 slack = current->timer_slack_ns;
1566 if (rt_task(current))
1567 slack = 0;
1568
1569 hrtimer_init_on_stack(&t.timer, clockid, mode);
1570 hrtimer_set_expires_range_ns(&t.timer, timespec_to_ktime(*rqtp), slack);
1571 if (do_nanosleep(&t, mode))
1572 goto out;
1573
1574 /* Absolute timers do not update the rmtp value and restart: */
1575 if (mode == HRTIMER_MODE_ABS) {
1576 ret = -ERESTARTNOHAND;
1577 goto out;
1578 }
1579
1580 if (rmtp) {
1581 ret = update_rmtp(&t.timer, rmtp);
1582 if (ret <= 0)
1583 goto out;
1584 }
1585
1586 restart = ¤t_thread_info()->restart_block;
1587 restart->fn = hrtimer_nanosleep_restart;
1588 restart->nanosleep.clockid = t.timer.base->clockid;
1589 restart->nanosleep.rmtp = rmtp;
1590 restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
1591
1592 ret = -ERESTART_RESTARTBLOCK;
1593out:
1594 destroy_hrtimer_on_stack(&t.timer);
1595 return ret;
1596}
1597
1598SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp,
1599 struct timespec __user *, rmtp)
1600{
1601 struct timespec tu;
1602
1603 if (copy_from_user(&tu, rqtp, sizeof(tu)))
1604 return -EFAULT;
1605
1606 if (!timespec_valid(&tu))
1607 return -EINVAL;
1608
1609 return hrtimer_nanosleep(&tu, rmtp, HRTIMER_MODE_REL, CLOCK_MONOTONIC);
1610}
1611
1612/*
1613 * Functions related to boot-time initialization:
1614 */
1615static void __cpuinit init_hrtimers_cpu(int cpu)
1616{
1617 struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
1618 int i;
1619
1620 raw_spin_lock_init(&cpu_base->lock);
1621
1622 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1623 cpu_base->clock_base[i].cpu_base = cpu_base;
1624 timerqueue_init_head(&cpu_base->clock_base[i].active);
1625 }
1626
1627 hrtimer_init_hres(cpu_base);
1628}
1629
1630#ifdef CONFIG_HOTPLUG_CPU
1631
1632static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
1633 struct hrtimer_clock_base *new_base)
1634{
1635 struct hrtimer *timer;
1636 struct timerqueue_node *node;
1637
1638 while ((node = timerqueue_getnext(&old_base->active))) {
1639 timer = container_of(node, struct hrtimer, node);
1640 BUG_ON(hrtimer_callback_running(timer));
1641 debug_deactivate(timer);
1642
1643 /*
1644 * Mark it as STATE_MIGRATE not INACTIVE otherwise the
1645 * timer could be seen as !active and just vanish away
1646 * under us on another CPU
1647 */
1648 __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
1649 timer->base = new_base;
1650 /*
1651 * Enqueue the timers on the new cpu. This does not
1652 * reprogram the event device in case the timer
1653 * expires before the earliest on this CPU, but we run
1654 * hrtimer_interrupt after we migrated everything to
1655 * sort out already expired timers and reprogram the
1656 * event device.
1657 */
1658 enqueue_hrtimer(timer, new_base);
1659
1660 /* Clear the migration state bit */
1661 timer->state &= ~HRTIMER_STATE_MIGRATE;
1662 }
1663}
1664
1665static void migrate_hrtimers(int scpu)
1666{
1667 struct hrtimer_cpu_base *old_base, *new_base;
1668 int i;
1669
1670 BUG_ON(cpu_online(scpu));
1671 tick_cancel_sched_timer(scpu);
1672
1673 local_irq_disable();
1674 old_base = &per_cpu(hrtimer_bases, scpu);
1675 new_base = &__get_cpu_var(hrtimer_bases);
1676 /*
1677 * The caller is globally serialized and nobody else
1678 * takes two locks at once, deadlock is not possible.
1679 */
1680 raw_spin_lock(&new_base->lock);
1681 raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
1682
1683 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1684 migrate_hrtimer_list(&old_base->clock_base[i],
1685 &new_base->clock_base[i]);
1686 }
1687
1688 raw_spin_unlock(&old_base->lock);
1689 raw_spin_unlock(&new_base->lock);
1690
1691 /* Check, if we got expired work to do */
1692 __hrtimer_peek_ahead_timers();
1693 local_irq_enable();
1694}
1695
1696#endif /* CONFIG_HOTPLUG_CPU */
1697
1698static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self,
1699 unsigned long action, void *hcpu)
1700{
1701 int scpu = (long)hcpu;
1702
1703 switch (action) {
1704
1705 case CPU_UP_PREPARE:
1706 case CPU_UP_PREPARE_FROZEN:
1707 init_hrtimers_cpu(scpu);
1708 break;
1709
1710#ifdef CONFIG_HOTPLUG_CPU
1711 case CPU_DYING:
1712 case CPU_DYING_FROZEN:
1713 clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu);
1714 break;
1715 case CPU_DEAD:
1716 case CPU_DEAD_FROZEN:
1717 {
1718 clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu);
1719 migrate_hrtimers(scpu);
1720 break;
1721 }
1722#endif
1723
1724 default:
1725 break;
1726 }
1727
1728 return NOTIFY_OK;
1729}
1730
1731static struct notifier_block __cpuinitdata hrtimers_nb = {
1732 .notifier_call = hrtimer_cpu_notify,
1733};
1734
1735void __init hrtimers_init(void)
1736{
1737 hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE,
1738 (void *)(long)smp_processor_id());
1739 register_cpu_notifier(&hrtimers_nb);
1740#ifdef CONFIG_HIGH_RES_TIMERS
1741 open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq);
1742#endif
1743}
1744
1745/**
1746 * schedule_hrtimeout_range_clock - sleep until timeout
1747 * @expires: timeout value (ktime_t)
1748 * @delta: slack in expires timeout (ktime_t)
1749 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1750 * @clock: timer clock, CLOCK_MONOTONIC or CLOCK_REALTIME
1751 */
1752int __sched
1753schedule_hrtimeout_range_clock(ktime_t *expires, unsigned long delta,
1754 const enum hrtimer_mode mode, int clock)
1755{
1756 struct hrtimer_sleeper t;
1757
1758 /*
1759 * Optimize when a zero timeout value is given. It does not
1760 * matter whether this is an absolute or a relative time.
1761 */
1762 if (expires && !expires->tv64) {
1763 __set_current_state(TASK_RUNNING);
1764 return 0;
1765 }
1766
1767 /*
1768 * A NULL parameter means "infinite"
1769 */
1770 if (!expires) {
1771 schedule();
1772 __set_current_state(TASK_RUNNING);
1773 return -EINTR;
1774 }
1775
1776 hrtimer_init_on_stack(&t.timer, clock, mode);
1777 hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
1778
1779 hrtimer_init_sleeper(&t, current);
1780
1781 hrtimer_start_expires(&t.timer, mode);
1782 if (!hrtimer_active(&t.timer))
1783 t.task = NULL;
1784
1785 if (likely(t.task))
1786 schedule();
1787
1788 hrtimer_cancel(&t.timer);
1789 destroy_hrtimer_on_stack(&t.timer);
1790
1791 __set_current_state(TASK_RUNNING);
1792
1793 return !t.task ? 0 : -EINTR;
1794}
1795
1796/**
1797 * schedule_hrtimeout_range - sleep until timeout
1798 * @expires: timeout value (ktime_t)
1799 * @delta: slack in expires timeout (ktime_t)
1800 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1801 *
1802 * Make the current task sleep until the given expiry time has
1803 * elapsed. The routine will return immediately unless
1804 * the current task state has been set (see set_current_state()).
1805 *
1806 * The @delta argument gives the kernel the freedom to schedule the
1807 * actual wakeup to a time that is both power and performance friendly.
1808 * The kernel give the normal best effort behavior for "@expires+@delta",
1809 * but may decide to fire the timer earlier, but no earlier than @expires.
1810 *
1811 * You can set the task state as follows -
1812 *
1813 * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1814 * pass before the routine returns.
1815 *
1816 * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1817 * delivered to the current task.
1818 *
1819 * The current task state is guaranteed to be TASK_RUNNING when this
1820 * routine returns.
1821 *
1822 * Returns 0 when the timer has expired otherwise -EINTR
1823 */
1824int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
1825 const enum hrtimer_mode mode)
1826{
1827 return schedule_hrtimeout_range_clock(expires, delta, mode,
1828 CLOCK_MONOTONIC);
1829}
1830EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
1831
1832/**
1833 * schedule_hrtimeout - sleep until timeout
1834 * @expires: timeout value (ktime_t)
1835 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1836 *
1837 * Make the current task sleep until the given expiry time has
1838 * elapsed. The routine will return immediately unless
1839 * the current task state has been set (see set_current_state()).
1840 *
1841 * You can set the task state as follows -
1842 *
1843 * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1844 * pass before the routine returns.
1845 *
1846 * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1847 * delivered to the current task.
1848 *
1849 * The current task state is guaranteed to be TASK_RUNNING when this
1850 * routine returns.
1851 *
1852 * Returns 0 when the timer has expired otherwise -EINTR
1853 */
1854int __sched schedule_hrtimeout(ktime_t *expires,
1855 const enum hrtimer_mode mode)
1856{
1857 return schedule_hrtimeout_range(expires, 0, mode);
1858}
1859EXPORT_SYMBOL_GPL(schedule_hrtimeout);