Loading...
1/*
2 * SH-2007 board support.
3 *
4 * Copyright (C) 2003, 2004 SUGIOKA Toshinobu
5 * Copyright (C) 2010 Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
6 */
7#include <linux/init.h>
8#include <linux/irq.h>
9#include <linux/regulator/fixed.h>
10#include <linux/regulator/machine.h>
11#include <linux/smsc911x.h>
12#include <linux/platform_device.h>
13#include <linux/ata_platform.h>
14#include <linux/io.h>
15#include <asm/machvec.h>
16#include <mach/sh2007.h>
17
18/* Dummy supplies, where voltage doesn't matter */
19static struct regulator_consumer_supply dummy_supplies[] = {
20 REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
21 REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
22 REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
23 REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
24};
25
26struct smsc911x_platform_config smc911x_info = {
27 .flags = SMSC911X_USE_32BIT,
28 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
29 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
30};
31
32static struct resource smsc9118_0_resources[] = {
33 [0] = {
34 .start = SMC0_BASE,
35 .end = SMC0_BASE + 0xff,
36 .flags = IORESOURCE_MEM,
37 },
38 [1] = {
39 .start = evt2irq(0x240),
40 .end = evt2irq(0x240),
41 .flags = IORESOURCE_IRQ,
42 }
43};
44
45static struct resource smsc9118_1_resources[] = {
46 [0] = {
47 .start = SMC1_BASE,
48 .end = SMC1_BASE + 0xff,
49 .flags = IORESOURCE_MEM,
50 },
51 [1] = {
52 .start = evt2irq(0x280),
53 .end = evt2irq(0x280),
54 .flags = IORESOURCE_IRQ,
55 }
56};
57
58static struct platform_device smsc9118_0_device = {
59 .name = "smsc911x",
60 .id = 0,
61 .num_resources = ARRAY_SIZE(smsc9118_0_resources),
62 .resource = smsc9118_0_resources,
63 .dev = {
64 .platform_data = &smc911x_info,
65 },
66};
67
68static struct platform_device smsc9118_1_device = {
69 .name = "smsc911x",
70 .id = 1,
71 .num_resources = ARRAY_SIZE(smsc9118_1_resources),
72 .resource = smsc9118_1_resources,
73 .dev = {
74 .platform_data = &smc911x_info,
75 },
76};
77
78static struct resource cf_resources[] = {
79 [0] = {
80 .start = CF_BASE + CF_OFFSET,
81 .end = CF_BASE + CF_OFFSET + 0x0f,
82 .flags = IORESOURCE_MEM,
83 },
84 [1] = {
85 .start = CF_BASE + CF_OFFSET + 0x206,
86 .end = CF_BASE + CF_OFFSET + 0x20f,
87 .flags = IORESOURCE_MEM,
88 },
89 [2] = {
90 .start = evt2irq(0x2c0),
91 .end = evt2irq(0x2c0),
92 .flags = IORESOURCE_IRQ,
93 },
94};
95
96static struct platform_device cf_device = {
97 .name = "pata_platform",
98 .id = 0,
99 .num_resources = ARRAY_SIZE(cf_resources),
100 .resource = cf_resources,
101};
102
103static struct platform_device *sh2007_devices[] __initdata = {
104 &smsc9118_0_device,
105 &smsc9118_1_device,
106 &cf_device,
107};
108
109static int __init sh2007_io_init(void)
110{
111 regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
112
113 platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
114 return 0;
115}
116subsys_initcall(sh2007_io_init);
117
118static void __init sh2007_init_irq(void)
119{
120 plat_irq_setup_pins(IRQ_MODE_IRQ);
121}
122
123/*
124 * Initialize the board
125 */
126static void __init sh2007_setup(char **cmdline_p)
127{
128 printk(KERN_INFO "SH-2007 Setup...");
129
130 /* setup wait control registers for area 5 */
131 __raw_writel(CS5BCR_D, CS5BCR);
132 __raw_writel(CS5WCR_D, CS5WCR);
133 __raw_writel(CS5PCR_D, CS5PCR);
134
135 printk(KERN_INFO " done.\n");
136}
137
138/*
139 * The Machine Vector
140 */
141struct sh_machine_vector mv_sh2007 __initmv = {
142 .mv_setup = sh2007_setup,
143 .mv_name = "sh2007",
144 .mv_init_irq = sh2007_init_irq,
145};
1/*
2 * SH-2007 board support.
3 *
4 * Copyright (C) 2003, 2004 SUGIOKA Toshinobu
5 * Copyright (C) 2010 Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
6 */
7#include <linux/init.h>
8#include <linux/irq.h>
9#include <linux/smsc911x.h>
10#include <linux/platform_device.h>
11#include <linux/ata_platform.h>
12#include <linux/io.h>
13#include <asm/machvec.h>
14#include <mach/sh2007.h>
15
16struct smsc911x_platform_config smc911x_info = {
17 .flags = SMSC911X_USE_32BIT,
18 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
19 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
20};
21
22static struct resource smsc9118_0_resources[] = {
23 [0] = {
24 .start = SMC0_BASE,
25 .end = SMC0_BASE + 0xff,
26 .flags = IORESOURCE_MEM,
27 },
28 [1] = {
29 .start = evt2irq(0x240),
30 .end = evt2irq(0x240),
31 .flags = IORESOURCE_IRQ,
32 }
33};
34
35static struct resource smsc9118_1_resources[] = {
36 [0] = {
37 .start = SMC1_BASE,
38 .end = SMC1_BASE + 0xff,
39 .flags = IORESOURCE_MEM,
40 },
41 [1] = {
42 .start = evt2irq(0x280),
43 .end = evt2irq(0x280),
44 .flags = IORESOURCE_IRQ,
45 }
46};
47
48static struct platform_device smsc9118_0_device = {
49 .name = "smsc911x",
50 .id = 0,
51 .num_resources = ARRAY_SIZE(smsc9118_0_resources),
52 .resource = smsc9118_0_resources,
53 .dev = {
54 .platform_data = &smc911x_info,
55 },
56};
57
58static struct platform_device smsc9118_1_device = {
59 .name = "smsc911x",
60 .id = 1,
61 .num_resources = ARRAY_SIZE(smsc9118_1_resources),
62 .resource = smsc9118_1_resources,
63 .dev = {
64 .platform_data = &smc911x_info,
65 },
66};
67
68static struct resource cf_resources[] = {
69 [0] = {
70 .start = CF_BASE + CF_OFFSET,
71 .end = CF_BASE + CF_OFFSET + 0x0f,
72 .flags = IORESOURCE_MEM,
73 },
74 [1] = {
75 .start = CF_BASE + CF_OFFSET + 0x206,
76 .end = CF_BASE + CF_OFFSET + 0x20f,
77 .flags = IORESOURCE_MEM,
78 },
79 [2] = {
80 .start = evt2irq(0x2c0),
81 .end = evt2irq(0x2c0),
82 .flags = IORESOURCE_IRQ,
83 },
84};
85
86static struct platform_device cf_device = {
87 .name = "pata_platform",
88 .id = 0,
89 .num_resources = ARRAY_SIZE(cf_resources),
90 .resource = cf_resources,
91};
92
93static struct platform_device *sh2007_devices[] __initdata = {
94 &smsc9118_0_device,
95 &smsc9118_1_device,
96 &cf_device,
97};
98
99static int __init sh2007_io_init(void)
100{
101 platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
102 return 0;
103}
104subsys_initcall(sh2007_io_init);
105
106static void __init sh2007_init_irq(void)
107{
108 plat_irq_setup_pins(IRQ_MODE_IRQ);
109}
110
111/*
112 * Initialize the board
113 */
114static void __init sh2007_setup(char **cmdline_p)
115{
116 printk(KERN_INFO "SH-2007 Setup...");
117
118 /* setup wait control registers for area 5 */
119 __raw_writel(CS5BCR_D, CS5BCR);
120 __raw_writel(CS5WCR_D, CS5WCR);
121 __raw_writel(CS5PCR_D, CS5PCR);
122
123 printk(KERN_INFO " done.\n");
124}
125
126/*
127 * The Machine Vector
128 */
129struct sh_machine_vector mv_sh2007 __initmv = {
130 .mv_setup = sh2007_setup,
131 .mv_name = "sh2007",
132 .mv_init_irq = sh2007_init_irq,
133};