Loading...
1/*
2 * Platform device support for Au1x00 SoCs.
3 *
4 * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
5 *
6 * (C) Copyright Embedded Alley Solutions, Inc 2005
7 * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 */
13
14#include <linux/dma-mapping.h>
15#include <linux/etherdevice.h>
16#include <linux/init.h>
17#include <linux/platform_device.h>
18#include <linux/serial_8250.h>
19#include <linux/slab.h>
20#include <linux/usb/ehci_pdriver.h>
21#include <linux/usb/ohci_pdriver.h>
22
23#include <asm/mach-au1x00/au1000.h>
24#include <asm/mach-au1x00/au1xxx_dbdma.h>
25#include <asm/mach-au1x00/au1100_mmc.h>
26#include <asm/mach-au1x00/au1xxx_eth.h>
27
28#include <prom.h>
29
30static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
31 unsigned int old_state)
32{
33#ifdef CONFIG_SERIAL_8250
34 switch (state) {
35 case 0:
36 alchemy_uart_enable(CPHYSADDR(port->membase));
37 serial8250_do_pm(port, state, old_state);
38 break;
39 case 3: /* power off */
40 serial8250_do_pm(port, state, old_state);
41 alchemy_uart_disable(CPHYSADDR(port->membase));
42 break;
43 default:
44 serial8250_do_pm(port, state, old_state);
45 break;
46 }
47#endif
48}
49
50#define PORT(_base, _irq) \
51 { \
52 .mapbase = _base, \
53 .irq = _irq, \
54 .regshift = 2, \
55 .iotype = UPIO_AU, \
56 .flags = UPF_SKIP_TEST | UPF_IOREMAP | \
57 UPF_FIXED_TYPE, \
58 .type = PORT_16550A, \
59 .pm = alchemy_8250_pm, \
60 }
61
62static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
63 [ALCHEMY_CPU_AU1000] = {
64 PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
65 PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
66 PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
67 PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
68 },
69 [ALCHEMY_CPU_AU1500] = {
70 PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
71 PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
72 },
73 [ALCHEMY_CPU_AU1100] = {
74 PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
75 PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
76 PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
77 },
78 [ALCHEMY_CPU_AU1550] = {
79 PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
80 PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
81 PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
82 },
83 [ALCHEMY_CPU_AU1200] = {
84 PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
85 PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
86 },
87 [ALCHEMY_CPU_AU1300] = {
88 PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
89 PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
90 PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
91 PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
92 },
93};
94
95static struct platform_device au1xx0_uart_device = {
96 .name = "serial8250",
97 .id = PLAT8250_DEV_AU1X00,
98};
99
100static void __init alchemy_setup_uarts(int ctype)
101{
102 unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
103 int s = sizeof(struct plat_serial8250_port);
104 int c = alchemy_get_uarts(ctype);
105 struct plat_serial8250_port *ports;
106
107 ports = kzalloc(s * (c + 1), GFP_KERNEL);
108 if (!ports) {
109 printk(KERN_INFO "Alchemy: no memory for UART data\n");
110 return;
111 }
112 memcpy(ports, au1x00_uart_data[ctype], s * c);
113 au1xx0_uart_device.dev.platform_data = ports;
114
115 /* Fill up uartclk. */
116 for (s = 0; s < c; s++)
117 ports[s].uartclk = uartclk;
118 if (platform_device_register(&au1xx0_uart_device))
119 printk(KERN_INFO "Alchemy: failed to register UARTs\n");
120}
121
122
123/* The dmamask must be set for OHCI/EHCI to work */
124static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32);
125static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32);
126
127/* Power on callback for the ehci platform driver */
128static int alchemy_ehci_power_on(struct platform_device *pdev)
129{
130 return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
131}
132
133/* Power off/suspend callback for the ehci platform driver */
134static void alchemy_ehci_power_off(struct platform_device *pdev)
135{
136 alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
137}
138
139static struct usb_ehci_pdata alchemy_ehci_pdata = {
140 .no_io_watchdog = 1,
141 .power_on = alchemy_ehci_power_on,
142 .power_off = alchemy_ehci_power_off,
143 .power_suspend = alchemy_ehci_power_off,
144};
145
146/* Power on callback for the ohci platform driver */
147static int alchemy_ohci_power_on(struct platform_device *pdev)
148{
149 int unit;
150
151 unit = (pdev->id == 1) ?
152 ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
153
154 return alchemy_usb_control(unit, 1);
155}
156
157/* Power off/suspend callback for the ohci platform driver */
158static void alchemy_ohci_power_off(struct platform_device *pdev)
159{
160 int unit;
161
162 unit = (pdev->id == 1) ?
163 ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
164
165 alchemy_usb_control(unit, 0);
166}
167
168static struct usb_ohci_pdata alchemy_ohci_pdata = {
169 .power_on = alchemy_ohci_power_on,
170 .power_off = alchemy_ohci_power_off,
171 .power_suspend = alchemy_ohci_power_off,
172};
173
174static unsigned long alchemy_ohci_data[][2] __initdata = {
175 [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
176 [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
177 [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
178 [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
179 [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
180 [ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
181};
182
183static unsigned long alchemy_ehci_data[][2] __initdata = {
184 [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
185 [ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
186};
187
188static int __init _new_usbres(struct resource **r, struct platform_device **d)
189{
190 *r = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
191 if (!*r)
192 return -ENOMEM;
193 *d = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
194 if (!*d) {
195 kfree(*r);
196 return -ENOMEM;
197 }
198
199 (*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32);
200 (*d)->num_resources = 2;
201 (*d)->resource = *r;
202
203 return 0;
204}
205
206static void __init alchemy_setup_usb(int ctype)
207{
208 struct resource *res;
209 struct platform_device *pdev;
210
211 /* setup OHCI0. Every variant has one */
212 if (_new_usbres(&res, &pdev))
213 return;
214
215 res[0].start = alchemy_ohci_data[ctype][0];
216 res[0].end = res[0].start + 0x100 - 1;
217 res[0].flags = IORESOURCE_MEM;
218 res[1].start = alchemy_ohci_data[ctype][1];
219 res[1].end = res[1].start;
220 res[1].flags = IORESOURCE_IRQ;
221 pdev->name = "ohci-platform";
222 pdev->id = 0;
223 pdev->dev.dma_mask = &alchemy_ohci_dmamask;
224 pdev->dev.platform_data = &alchemy_ohci_pdata;
225
226 if (platform_device_register(pdev))
227 printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
228
229
230 /* setup EHCI0: Au1200/Au1300 */
231 if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
232 if (_new_usbres(&res, &pdev))
233 return;
234
235 res[0].start = alchemy_ehci_data[ctype][0];
236 res[0].end = res[0].start + 0x100 - 1;
237 res[0].flags = IORESOURCE_MEM;
238 res[1].start = alchemy_ehci_data[ctype][1];
239 res[1].end = res[1].start;
240 res[1].flags = IORESOURCE_IRQ;
241 pdev->name = "ehci-platform";
242 pdev->id = 0;
243 pdev->dev.dma_mask = &alchemy_ehci_dmamask;
244 pdev->dev.platform_data = &alchemy_ehci_pdata;
245
246 if (platform_device_register(pdev))
247 printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
248 }
249
250 /* Au1300: OHCI1 */
251 if (ctype == ALCHEMY_CPU_AU1300) {
252 if (_new_usbres(&res, &pdev))
253 return;
254
255 res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
256 res[0].end = res[0].start + 0x100 - 1;
257 res[0].flags = IORESOURCE_MEM;
258 res[1].start = AU1300_USB_INT;
259 res[1].end = res[1].start;
260 res[1].flags = IORESOURCE_IRQ;
261 pdev->name = "ohci-platform";
262 pdev->id = 1;
263 pdev->dev.dma_mask = &alchemy_ohci_dmamask;
264 pdev->dev.platform_data = &alchemy_ohci_pdata;
265
266 if (platform_device_register(pdev))
267 printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
268 }
269}
270
271/* Macro to help defining the Ethernet MAC resources */
272#define MAC_RES_COUNT 4 /* MAC regs, MAC en, MAC INT, MACDMA regs */
273#define MAC_RES(_base, _enable, _irq, _macdma) \
274 { \
275 .start = _base, \
276 .end = _base + 0xffff, \
277 .flags = IORESOURCE_MEM, \
278 }, \
279 { \
280 .start = _enable, \
281 .end = _enable + 0x3, \
282 .flags = IORESOURCE_MEM, \
283 }, \
284 { \
285 .start = _irq, \
286 .end = _irq, \
287 .flags = IORESOURCE_IRQ \
288 }, \
289 { \
290 .start = _macdma, \
291 .end = _macdma + 0x1ff, \
292 .flags = IORESOURCE_MEM, \
293 }
294
295static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
296 [ALCHEMY_CPU_AU1000] = {
297 MAC_RES(AU1000_MAC0_PHYS_ADDR,
298 AU1000_MACEN_PHYS_ADDR,
299 AU1000_MAC0_DMA_INT,
300 AU1000_MACDMA0_PHYS_ADDR)
301 },
302 [ALCHEMY_CPU_AU1500] = {
303 MAC_RES(AU1500_MAC0_PHYS_ADDR,
304 AU1500_MACEN_PHYS_ADDR,
305 AU1500_MAC0_DMA_INT,
306 AU1000_MACDMA0_PHYS_ADDR)
307 },
308 [ALCHEMY_CPU_AU1100] = {
309 MAC_RES(AU1000_MAC0_PHYS_ADDR,
310 AU1000_MACEN_PHYS_ADDR,
311 AU1100_MAC0_DMA_INT,
312 AU1000_MACDMA0_PHYS_ADDR)
313 },
314 [ALCHEMY_CPU_AU1550] = {
315 MAC_RES(AU1000_MAC0_PHYS_ADDR,
316 AU1000_MACEN_PHYS_ADDR,
317 AU1550_MAC0_DMA_INT,
318 AU1000_MACDMA0_PHYS_ADDR)
319 },
320};
321
322static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
323 .phy1_search_mac0 = 1,
324};
325
326static struct platform_device au1xxx_eth0_device = {
327 .name = "au1000-eth",
328 .id = 0,
329 .num_resources = MAC_RES_COUNT,
330 .dev.platform_data = &au1xxx_eth0_platform_data,
331};
332
333static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
334 [ALCHEMY_CPU_AU1000] = {
335 MAC_RES(AU1000_MAC1_PHYS_ADDR,
336 AU1000_MACEN_PHYS_ADDR + 4,
337 AU1000_MAC1_DMA_INT,
338 AU1000_MACDMA1_PHYS_ADDR)
339 },
340 [ALCHEMY_CPU_AU1500] = {
341 MAC_RES(AU1500_MAC1_PHYS_ADDR,
342 AU1500_MACEN_PHYS_ADDR + 4,
343 AU1500_MAC1_DMA_INT,
344 AU1000_MACDMA1_PHYS_ADDR)
345 },
346 [ALCHEMY_CPU_AU1550] = {
347 MAC_RES(AU1000_MAC1_PHYS_ADDR,
348 AU1000_MACEN_PHYS_ADDR + 4,
349 AU1550_MAC1_DMA_INT,
350 AU1000_MACDMA1_PHYS_ADDR)
351 },
352};
353
354static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
355 .phy1_search_mac0 = 1,
356};
357
358static struct platform_device au1xxx_eth1_device = {
359 .name = "au1000-eth",
360 .id = 1,
361 .num_resources = MAC_RES_COUNT,
362 .dev.platform_data = &au1xxx_eth1_platform_data,
363};
364
365void __init au1xxx_override_eth_cfg(unsigned int port,
366 struct au1000_eth_platform_data *eth_data)
367{
368 if (!eth_data || port > 1)
369 return;
370
371 if (port == 0)
372 memcpy(&au1xxx_eth0_platform_data, eth_data,
373 sizeof(struct au1000_eth_platform_data));
374 else
375 memcpy(&au1xxx_eth1_platform_data, eth_data,
376 sizeof(struct au1000_eth_platform_data));
377}
378
379static void __init alchemy_setup_macs(int ctype)
380{
381 int ret, i;
382 unsigned char ethaddr[6];
383 struct resource *macres;
384
385 /* Handle 1st MAC */
386 if (alchemy_get_macs(ctype) < 1)
387 return;
388
389 macres = kmemdup(au1xxx_eth0_resources[ctype],
390 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
391 if (!macres) {
392 printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
393 return;
394 }
395 au1xxx_eth0_device.resource = macres;
396
397 i = prom_get_ethernet_addr(ethaddr);
398 if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
399 memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
400
401 ret = platform_device_register(&au1xxx_eth0_device);
402 if (ret)
403 printk(KERN_INFO "Alchemy: failed to register MAC0\n");
404
405
406 /* Handle 2nd MAC */
407 if (alchemy_get_macs(ctype) < 2)
408 return;
409
410 macres = kmemdup(au1xxx_eth1_resources[ctype],
411 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
412 if (!macres) {
413 printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
414 return;
415 }
416 au1xxx_eth1_device.resource = macres;
417
418 ethaddr[5] += 1; /* next addr for 2nd MAC */
419 if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
420 memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
421
422 /* Register second MAC if enabled in pinfunc */
423 if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) {
424 ret = platform_device_register(&au1xxx_eth1_device);
425 if (ret)
426 printk(KERN_INFO "Alchemy: failed to register MAC1\n");
427 }
428}
429
430static int __init au1xxx_platform_init(void)
431{
432 int ctype = alchemy_get_cputype();
433
434 alchemy_setup_uarts(ctype);
435 alchemy_setup_macs(ctype);
436 alchemy_setup_usb(ctype);
437
438 return 0;
439}
440
441arch_initcall(au1xxx_platform_init);
1/*
2 * Platform device support for Au1x00 SoCs.
3 *
4 * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
5 *
6 * (C) Copyright Embedded Alley Solutions, Inc 2005
7 * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 */
13
14#include <linux/dma-mapping.h>
15#include <linux/etherdevice.h>
16#include <linux/init.h>
17#include <linux/platform_device.h>
18#include <linux/serial_8250.h>
19#include <linux/slab.h>
20
21#include <asm/mach-au1x00/au1xxx.h>
22#include <asm/mach-au1x00/au1xxx_dbdma.h>
23#include <asm/mach-au1x00/au1100_mmc.h>
24#include <asm/mach-au1x00/au1xxx_eth.h>
25
26#include <prom.h>
27
28static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
29 unsigned int old_state)
30{
31#ifdef CONFIG_SERIAL_8250
32 switch (state) {
33 case 0:
34 alchemy_uart_enable(CPHYSADDR(port->membase));
35 serial8250_do_pm(port, state, old_state);
36 break;
37 case 3: /* power off */
38 serial8250_do_pm(port, state, old_state);
39 alchemy_uart_disable(CPHYSADDR(port->membase));
40 break;
41 default:
42 serial8250_do_pm(port, state, old_state);
43 break;
44 }
45#endif
46}
47
48#define PORT(_base, _irq) \
49 { \
50 .mapbase = _base, \
51 .irq = _irq, \
52 .regshift = 2, \
53 .iotype = UPIO_AU, \
54 .flags = UPF_SKIP_TEST | UPF_IOREMAP | \
55 UPF_FIXED_TYPE, \
56 .type = PORT_16550A, \
57 .pm = alchemy_8250_pm, \
58 }
59
60static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
61 [ALCHEMY_CPU_AU1000] = {
62 PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
63 PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
64 PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
65 PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
66 },
67 [ALCHEMY_CPU_AU1500] = {
68 PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
69 PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
70 },
71 [ALCHEMY_CPU_AU1100] = {
72 PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
73 PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
74 PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
75 },
76 [ALCHEMY_CPU_AU1550] = {
77 PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
78 PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
79 PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
80 },
81 [ALCHEMY_CPU_AU1200] = {
82 PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
83 PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
84 },
85};
86
87static struct platform_device au1xx0_uart_device = {
88 .name = "serial8250",
89 .id = PLAT8250_DEV_AU1X00,
90};
91
92static void __init alchemy_setup_uarts(int ctype)
93{
94 unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
95 int s = sizeof(struct plat_serial8250_port);
96 int c = alchemy_get_uarts(ctype);
97 struct plat_serial8250_port *ports;
98
99 ports = kzalloc(s * (c + 1), GFP_KERNEL);
100 if (!ports) {
101 printk(KERN_INFO "Alchemy: no memory for UART data\n");
102 return;
103 }
104 memcpy(ports, au1x00_uart_data[ctype], s * c);
105 au1xx0_uart_device.dev.platform_data = ports;
106
107 /* Fill up uartclk. */
108 for (s = 0; s < c; s++)
109 ports[s].uartclk = uartclk;
110 if (platform_device_register(&au1xx0_uart_device))
111 printk(KERN_INFO "Alchemy: failed to register UARTs\n");
112}
113
114/* OHCI (USB full speed host controller) */
115static struct resource au1xxx_usb_ohci_resources[] = {
116 [0] = {
117 .start = USB_OHCI_BASE,
118 .end = USB_OHCI_BASE + USB_OHCI_LEN - 1,
119 .flags = IORESOURCE_MEM,
120 },
121 [1] = {
122 .start = FOR_PLATFORM_C_USB_HOST_INT,
123 .end = FOR_PLATFORM_C_USB_HOST_INT,
124 .flags = IORESOURCE_IRQ,
125 },
126};
127
128/* The dmamask must be set for OHCI to work */
129static u64 ohci_dmamask = DMA_BIT_MASK(32);
130
131static struct platform_device au1xxx_usb_ohci_device = {
132 .name = "au1xxx-ohci",
133 .id = 0,
134 .dev = {
135 .dma_mask = &ohci_dmamask,
136 .coherent_dma_mask = DMA_BIT_MASK(32),
137 },
138 .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources),
139 .resource = au1xxx_usb_ohci_resources,
140};
141
142/*** AU1100 LCD controller ***/
143
144#ifdef CONFIG_FB_AU1100
145static struct resource au1100_lcd_resources[] = {
146 [0] = {
147 .start = LCD_PHYS_ADDR,
148 .end = LCD_PHYS_ADDR + 0x800 - 1,
149 .flags = IORESOURCE_MEM,
150 },
151 [1] = {
152 .start = AU1100_LCD_INT,
153 .end = AU1100_LCD_INT,
154 .flags = IORESOURCE_IRQ,
155 }
156};
157
158static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
159
160static struct platform_device au1100_lcd_device = {
161 .name = "au1100-lcd",
162 .id = 0,
163 .dev = {
164 .dma_mask = &au1100_lcd_dmamask,
165 .coherent_dma_mask = DMA_BIT_MASK(32),
166 },
167 .num_resources = ARRAY_SIZE(au1100_lcd_resources),
168 .resource = au1100_lcd_resources,
169};
170#endif
171
172#ifdef CONFIG_SOC_AU1200
173/* EHCI (USB high speed host controller) */
174static struct resource au1xxx_usb_ehci_resources[] = {
175 [0] = {
176 .start = USB_EHCI_BASE,
177 .end = USB_EHCI_BASE + USB_EHCI_LEN - 1,
178 .flags = IORESOURCE_MEM,
179 },
180 [1] = {
181 .start = AU1200_USB_INT,
182 .end = AU1200_USB_INT,
183 .flags = IORESOURCE_IRQ,
184 },
185};
186
187static u64 ehci_dmamask = DMA_BIT_MASK(32);
188
189static struct platform_device au1xxx_usb_ehci_device = {
190 .name = "au1xxx-ehci",
191 .id = 0,
192 .dev = {
193 .dma_mask = &ehci_dmamask,
194 .coherent_dma_mask = DMA_BIT_MASK(32),
195 },
196 .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources),
197 .resource = au1xxx_usb_ehci_resources,
198};
199
200/* Au1200 UDC (USB gadget controller) */
201static struct resource au1xxx_usb_gdt_resources[] = {
202 [0] = {
203 .start = USB_UDC_BASE,
204 .end = USB_UDC_BASE + USB_UDC_LEN - 1,
205 .flags = IORESOURCE_MEM,
206 },
207 [1] = {
208 .start = AU1200_USB_INT,
209 .end = AU1200_USB_INT,
210 .flags = IORESOURCE_IRQ,
211 },
212};
213
214static u64 udc_dmamask = DMA_BIT_MASK(32);
215
216static struct platform_device au1xxx_usb_gdt_device = {
217 .name = "au1xxx-udc",
218 .id = 0,
219 .dev = {
220 .dma_mask = &udc_dmamask,
221 .coherent_dma_mask = DMA_BIT_MASK(32),
222 },
223 .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources),
224 .resource = au1xxx_usb_gdt_resources,
225};
226
227/* Au1200 UOC (USB OTG controller) */
228static struct resource au1xxx_usb_otg_resources[] = {
229 [0] = {
230 .start = USB_UOC_BASE,
231 .end = USB_UOC_BASE + USB_UOC_LEN - 1,
232 .flags = IORESOURCE_MEM,
233 },
234 [1] = {
235 .start = AU1200_USB_INT,
236 .end = AU1200_USB_INT,
237 .flags = IORESOURCE_IRQ,
238 },
239};
240
241static u64 uoc_dmamask = DMA_BIT_MASK(32);
242
243static struct platform_device au1xxx_usb_otg_device = {
244 .name = "au1xxx-uoc",
245 .id = 0,
246 .dev = {
247 .dma_mask = &uoc_dmamask,
248 .coherent_dma_mask = DMA_BIT_MASK(32),
249 },
250 .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources),
251 .resource = au1xxx_usb_otg_resources,
252};
253
254static struct resource au1200_lcd_resources[] = {
255 [0] = {
256 .start = LCD_PHYS_ADDR,
257 .end = LCD_PHYS_ADDR + 0x800 - 1,
258 .flags = IORESOURCE_MEM,
259 },
260 [1] = {
261 .start = AU1200_LCD_INT,
262 .end = AU1200_LCD_INT,
263 .flags = IORESOURCE_IRQ,
264 }
265};
266
267static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
268
269static struct platform_device au1200_lcd_device = {
270 .name = "au1200-lcd",
271 .id = 0,
272 .dev = {
273 .dma_mask = &au1200_lcd_dmamask,
274 .coherent_dma_mask = DMA_BIT_MASK(32),
275 },
276 .num_resources = ARRAY_SIZE(au1200_lcd_resources),
277 .resource = au1200_lcd_resources,
278};
279
280static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
281
282extern struct au1xmmc_platform_data au1xmmc_platdata[2];
283
284static struct resource au1200_mmc0_resources[] = {
285 [0] = {
286 .start = AU1100_SD0_PHYS_ADDR,
287 .end = AU1100_SD0_PHYS_ADDR + 0xfff,
288 .flags = IORESOURCE_MEM,
289 },
290 [1] = {
291 .start = AU1200_SD_INT,
292 .end = AU1200_SD_INT,
293 .flags = IORESOURCE_IRQ,
294 },
295 [2] = {
296 .start = DSCR_CMD0_SDMS_TX0,
297 .end = DSCR_CMD0_SDMS_TX0,
298 .flags = IORESOURCE_DMA,
299 },
300 [3] = {
301 .start = DSCR_CMD0_SDMS_RX0,
302 .end = DSCR_CMD0_SDMS_RX0,
303 .flags = IORESOURCE_DMA,
304 }
305};
306
307static struct platform_device au1200_mmc0_device = {
308 .name = "au1xxx-mmc",
309 .id = 0,
310 .dev = {
311 .dma_mask = &au1xxx_mmc_dmamask,
312 .coherent_dma_mask = DMA_BIT_MASK(32),
313 .platform_data = &au1xmmc_platdata[0],
314 },
315 .num_resources = ARRAY_SIZE(au1200_mmc0_resources),
316 .resource = au1200_mmc0_resources,
317};
318
319#ifndef CONFIG_MIPS_DB1200
320static struct resource au1200_mmc1_resources[] = {
321 [0] = {
322 .start = AU1100_SD1_PHYS_ADDR,
323 .end = AU1100_SD1_PHYS_ADDR + 0xfff,
324 .flags = IORESOURCE_MEM,
325 },
326 [1] = {
327 .start = AU1200_SD_INT,
328 .end = AU1200_SD_INT,
329 .flags = IORESOURCE_IRQ,
330 },
331 [2] = {
332 .start = DSCR_CMD0_SDMS_TX1,
333 .end = DSCR_CMD0_SDMS_TX1,
334 .flags = IORESOURCE_DMA,
335 },
336 [3] = {
337 .start = DSCR_CMD0_SDMS_RX1,
338 .end = DSCR_CMD0_SDMS_RX1,
339 .flags = IORESOURCE_DMA,
340 }
341};
342
343static struct platform_device au1200_mmc1_device = {
344 .name = "au1xxx-mmc",
345 .id = 1,
346 .dev = {
347 .dma_mask = &au1xxx_mmc_dmamask,
348 .coherent_dma_mask = DMA_BIT_MASK(32),
349 .platform_data = &au1xmmc_platdata[1],
350 },
351 .num_resources = ARRAY_SIZE(au1200_mmc1_resources),
352 .resource = au1200_mmc1_resources,
353};
354#endif /* #ifndef CONFIG_MIPS_DB1200 */
355#endif /* #ifdef CONFIG_SOC_AU1200 */
356
357/* All Alchemy demoboards with I2C have this #define in their headers */
358#ifdef SMBUS_PSC_BASE
359static struct resource pbdb_smbus_resources[] = {
360 {
361 .start = CPHYSADDR(SMBUS_PSC_BASE),
362 .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
363 .flags = IORESOURCE_MEM,
364 },
365};
366
367static struct platform_device pbdb_smbus_device = {
368 .name = "au1xpsc_smbus",
369 .id = 0, /* bus number */
370 .num_resources = ARRAY_SIZE(pbdb_smbus_resources),
371 .resource = pbdb_smbus_resources,
372};
373#endif
374
375/* Macro to help defining the Ethernet MAC resources */
376#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */
377#define MAC_RES(_base, _enable, _irq) \
378 { \
379 .start = _base, \
380 .end = _base + 0xffff, \
381 .flags = IORESOURCE_MEM, \
382 }, \
383 { \
384 .start = _enable, \
385 .end = _enable + 0x3, \
386 .flags = IORESOURCE_MEM, \
387 }, \
388 { \
389 .start = _irq, \
390 .end = _irq, \
391 .flags = IORESOURCE_IRQ \
392 }
393
394static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
395 [ALCHEMY_CPU_AU1000] = {
396 MAC_RES(AU1000_MAC0_PHYS_ADDR,
397 AU1000_MACEN_PHYS_ADDR,
398 AU1000_MAC0_DMA_INT)
399 },
400 [ALCHEMY_CPU_AU1500] = {
401 MAC_RES(AU1500_MAC0_PHYS_ADDR,
402 AU1500_MACEN_PHYS_ADDR,
403 AU1500_MAC0_DMA_INT)
404 },
405 [ALCHEMY_CPU_AU1100] = {
406 MAC_RES(AU1000_MAC0_PHYS_ADDR,
407 AU1000_MACEN_PHYS_ADDR,
408 AU1100_MAC0_DMA_INT)
409 },
410 [ALCHEMY_CPU_AU1550] = {
411 MAC_RES(AU1000_MAC0_PHYS_ADDR,
412 AU1000_MACEN_PHYS_ADDR,
413 AU1550_MAC0_DMA_INT)
414 },
415};
416
417static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
418 .phy1_search_mac0 = 1,
419};
420
421static struct platform_device au1xxx_eth0_device = {
422 .name = "au1000-eth",
423 .id = 0,
424 .num_resources = MAC_RES_COUNT,
425 .dev.platform_data = &au1xxx_eth0_platform_data,
426};
427
428static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
429 [ALCHEMY_CPU_AU1000] = {
430 MAC_RES(AU1000_MAC1_PHYS_ADDR,
431 AU1000_MACEN_PHYS_ADDR + 4,
432 AU1000_MAC1_DMA_INT)
433 },
434 [ALCHEMY_CPU_AU1500] = {
435 MAC_RES(AU1500_MAC1_PHYS_ADDR,
436 AU1500_MACEN_PHYS_ADDR + 4,
437 AU1500_MAC1_DMA_INT)
438 },
439 [ALCHEMY_CPU_AU1550] = {
440 MAC_RES(AU1000_MAC1_PHYS_ADDR,
441 AU1000_MACEN_PHYS_ADDR + 4,
442 AU1550_MAC1_DMA_INT)
443 },
444};
445
446static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
447 .phy1_search_mac0 = 1,
448};
449
450static struct platform_device au1xxx_eth1_device = {
451 .name = "au1000-eth",
452 .id = 1,
453 .num_resources = MAC_RES_COUNT,
454 .dev.platform_data = &au1xxx_eth1_platform_data,
455};
456
457void __init au1xxx_override_eth_cfg(unsigned int port,
458 struct au1000_eth_platform_data *eth_data)
459{
460 if (!eth_data || port > 1)
461 return;
462
463 if (port == 0)
464 memcpy(&au1xxx_eth0_platform_data, eth_data,
465 sizeof(struct au1000_eth_platform_data));
466 else
467 memcpy(&au1xxx_eth1_platform_data, eth_data,
468 sizeof(struct au1000_eth_platform_data));
469}
470
471static void __init alchemy_setup_macs(int ctype)
472{
473 int ret, i;
474 unsigned char ethaddr[6];
475 struct resource *macres;
476
477 /* Handle 1st MAC */
478 if (alchemy_get_macs(ctype) < 1)
479 return;
480
481 macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
482 if (!macres) {
483 printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
484 return;
485 }
486 memcpy(macres, au1xxx_eth0_resources[ctype],
487 sizeof(struct resource) * MAC_RES_COUNT);
488 au1xxx_eth0_device.resource = macres;
489
490 i = prom_get_ethernet_addr(ethaddr);
491 if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
492 memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
493
494 ret = platform_device_register(&au1xxx_eth0_device);
495 if (ret)
496 printk(KERN_INFO "Alchemy: failed to register MAC0\n");
497
498
499 /* Handle 2nd MAC */
500 if (alchemy_get_macs(ctype) < 2)
501 return;
502
503 macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
504 if (!macres) {
505 printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
506 return;
507 }
508 memcpy(macres, au1xxx_eth1_resources[ctype],
509 sizeof(struct resource) * MAC_RES_COUNT);
510 au1xxx_eth1_device.resource = macres;
511
512 ethaddr[5] += 1; /* next addr for 2nd MAC */
513 if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
514 memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
515
516 /* Register second MAC if enabled in pinfunc */
517 if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) {
518 ret = platform_device_register(&au1xxx_eth1_device);
519 if (ret)
520 printk(KERN_INFO "Alchemy: failed to register MAC1\n");
521 }
522}
523
524static struct platform_device *au1xxx_platform_devices[] __initdata = {
525 &au1xxx_usb_ohci_device,
526#ifdef CONFIG_FB_AU1100
527 &au1100_lcd_device,
528#endif
529#ifdef CONFIG_SOC_AU1200
530 &au1xxx_usb_ehci_device,
531 &au1xxx_usb_gdt_device,
532 &au1xxx_usb_otg_device,
533 &au1200_lcd_device,
534 &au1200_mmc0_device,
535#ifndef CONFIG_MIPS_DB1200
536 &au1200_mmc1_device,
537#endif
538#endif
539#ifdef SMBUS_PSC_BASE
540 &pbdb_smbus_device,
541#endif
542};
543
544static int __init au1xxx_platform_init(void)
545{
546 int err, ctype = alchemy_get_cputype();
547
548 alchemy_setup_uarts(ctype);
549 alchemy_setup_macs(ctype);
550
551 err = platform_add_devices(au1xxx_platform_devices,
552 ARRAY_SIZE(au1xxx_platform_devices));
553 return err;
554}
555
556arch_initcall(au1xxx_platform_init);