Loading...
1/*
2 * net/tipc/core.c: TIPC module code
3 *
4 * Copyright (c) 2003-2006, 2013, Ericsson AB
5 * Copyright (c) 2005-2006, 2010-2013, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#include "core.h"
38#include "ref.h"
39#include "name_table.h"
40#include "subscr.h"
41#include "config.h"
42#include "port.h"
43
44#include <linux/module.h>
45
46/* global variables used by multiple sub-systems within TIPC */
47int tipc_random __read_mostly;
48
49/* configurable TIPC parameters */
50u32 tipc_own_addr __read_mostly;
51int tipc_max_ports __read_mostly;
52int tipc_net_id __read_mostly;
53int sysctl_tipc_rmem[3] __read_mostly; /* min/default/max */
54
55/**
56 * tipc_buf_acquire - creates a TIPC message buffer
57 * @size: message size (including TIPC header)
58 *
59 * Returns a new buffer with data pointers set to the specified size.
60 *
61 * NOTE: Headroom is reserved to allow prepending of a data link header.
62 * There may also be unrequested tailroom present at the buffer's end.
63 */
64struct sk_buff *tipc_buf_acquire(u32 size)
65{
66 struct sk_buff *skb;
67 unsigned int buf_size = (BUF_HEADROOM + size + 3) & ~3u;
68
69 skb = alloc_skb_fclone(buf_size, GFP_ATOMIC);
70 if (skb) {
71 skb_reserve(skb, BUF_HEADROOM);
72 skb_put(skb, size);
73 skb->next = NULL;
74 }
75 return skb;
76}
77
78/**
79 * tipc_core_stop - switch TIPC from SINGLE NODE to NOT RUNNING mode
80 */
81static void tipc_core_stop(void)
82{
83 tipc_handler_stop();
84 tipc_net_stop();
85 tipc_bearer_cleanup();
86 tipc_netlink_stop();
87 tipc_subscr_stop();
88 tipc_nametbl_stop();
89 tipc_ref_table_stop();
90 tipc_socket_stop();
91 tipc_unregister_sysctl();
92}
93
94/**
95 * tipc_core_start - switch TIPC from NOT RUNNING to SINGLE NODE mode
96 */
97static int tipc_core_start(void)
98{
99 int err;
100
101 get_random_bytes(&tipc_random, sizeof(tipc_random));
102
103 err = tipc_handler_start();
104 if (err)
105 goto out_handler;
106
107 err = tipc_ref_table_init(tipc_max_ports, tipc_random);
108 if (err)
109 goto out_reftbl;
110
111 err = tipc_nametbl_init();
112 if (err)
113 goto out_nametbl;
114
115 err = tipc_netlink_start();
116 if (err)
117 goto out_netlink;
118
119 err = tipc_socket_init();
120 if (err)
121 goto out_socket;
122
123 err = tipc_register_sysctl();
124 if (err)
125 goto out_sysctl;
126
127 err = tipc_subscr_start();
128 if (err)
129 goto out_subscr;
130
131 err = tipc_bearer_setup();
132 if (err)
133 goto out_bearer;
134
135 return 0;
136out_bearer:
137 tipc_subscr_stop();
138out_subscr:
139 tipc_unregister_sysctl();
140out_sysctl:
141 tipc_socket_stop();
142out_socket:
143 tipc_netlink_stop();
144out_netlink:
145 tipc_nametbl_stop();
146out_nametbl:
147 tipc_ref_table_stop();
148out_reftbl:
149 tipc_handler_stop();
150out_handler:
151 return err;
152}
153
154static int __init tipc_init(void)
155{
156 int res;
157
158 pr_info("Activated (version " TIPC_MOD_VER ")\n");
159
160 tipc_own_addr = 0;
161 tipc_max_ports = CONFIG_TIPC_PORTS;
162 tipc_net_id = 4711;
163
164 sysctl_tipc_rmem[0] = CONN_OVERLOAD_LIMIT >> 4 << TIPC_LOW_IMPORTANCE;
165 sysctl_tipc_rmem[1] = CONN_OVERLOAD_LIMIT >> 4 <<
166 TIPC_CRITICAL_IMPORTANCE;
167 sysctl_tipc_rmem[2] = CONN_OVERLOAD_LIMIT;
168
169 res = tipc_core_start();
170 if (res)
171 pr_err("Unable to start in single node mode\n");
172 else
173 pr_info("Started in single node mode\n");
174 return res;
175}
176
177static void __exit tipc_exit(void)
178{
179 tipc_core_stop();
180 pr_info("Deactivated\n");
181}
182
183module_init(tipc_init);
184module_exit(tipc_exit);
185
186MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
187MODULE_LICENSE("Dual BSD/GPL");
188MODULE_VERSION(TIPC_MOD_VER);
1/*
2 * net/tipc/core.c: TIPC module code
3 *
4 * Copyright (c) 2003-2006, Ericsson AB
5 * Copyright (c) 2005-2006, 2010-2011, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#include "core.h"
38#include "ref.h"
39#include "name_table.h"
40#include "subscr.h"
41#include "config.h"
42
43
44#ifndef CONFIG_TIPC_PORTS
45#define CONFIG_TIPC_PORTS 8191
46#endif
47
48#ifndef CONFIG_TIPC_LOG
49#define CONFIG_TIPC_LOG 0
50#endif
51
52/* global variables used by multiple sub-systems within TIPC */
53
54int tipc_mode = TIPC_NOT_RUNNING;
55int tipc_random;
56
57const char tipc_alphabet[] =
58 "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789_.";
59
60/* configurable TIPC parameters */
61
62u32 tipc_own_addr;
63int tipc_max_ports;
64int tipc_max_subscriptions;
65int tipc_max_publications;
66int tipc_net_id;
67int tipc_remote_management;
68
69
70/**
71 * tipc_buf_acquire - creates a TIPC message buffer
72 * @size: message size (including TIPC header)
73 *
74 * Returns a new buffer with data pointers set to the specified size.
75 *
76 * NOTE: Headroom is reserved to allow prepending of a data link header.
77 * There may also be unrequested tailroom present at the buffer's end.
78 */
79
80struct sk_buff *tipc_buf_acquire(u32 size)
81{
82 struct sk_buff *skb;
83 unsigned int buf_size = (BUF_HEADROOM + size + 3) & ~3u;
84
85 skb = alloc_skb_fclone(buf_size, GFP_ATOMIC);
86 if (skb) {
87 skb_reserve(skb, BUF_HEADROOM);
88 skb_put(skb, size);
89 skb->next = NULL;
90 }
91 return skb;
92}
93
94/**
95 * tipc_core_stop_net - shut down TIPC networking sub-systems
96 */
97
98static void tipc_core_stop_net(void)
99{
100 tipc_eth_media_stop();
101 tipc_net_stop();
102}
103
104/**
105 * start_net - start TIPC networking sub-systems
106 */
107
108int tipc_core_start_net(unsigned long addr)
109{
110 int res;
111
112 res = tipc_net_start(addr);
113 if (!res)
114 res = tipc_eth_media_start();
115 if (res)
116 tipc_core_stop_net();
117 return res;
118}
119
120/**
121 * tipc_core_stop - switch TIPC from SINGLE NODE to NOT RUNNING mode
122 */
123
124static void tipc_core_stop(void)
125{
126 if (tipc_mode != TIPC_NODE_MODE)
127 return;
128
129 tipc_mode = TIPC_NOT_RUNNING;
130
131 tipc_netlink_stop();
132 tipc_handler_stop();
133 tipc_cfg_stop();
134 tipc_subscr_stop();
135 tipc_nametbl_stop();
136 tipc_ref_table_stop();
137 tipc_socket_stop();
138 tipc_log_resize(0);
139}
140
141/**
142 * tipc_core_start - switch TIPC from NOT RUNNING to SINGLE NODE mode
143 */
144
145static int tipc_core_start(void)
146{
147 int res;
148
149 if (tipc_mode != TIPC_NOT_RUNNING)
150 return -ENOPROTOOPT;
151
152 get_random_bytes(&tipc_random, sizeof(tipc_random));
153 tipc_mode = TIPC_NODE_MODE;
154
155 res = tipc_handler_start();
156 if (!res)
157 res = tipc_ref_table_init(tipc_max_ports, tipc_random);
158 if (!res)
159 res = tipc_nametbl_init();
160 if (!res)
161 res = tipc_k_signal((Handler)tipc_subscr_start, 0);
162 if (!res)
163 res = tipc_k_signal((Handler)tipc_cfg_init, 0);
164 if (!res)
165 res = tipc_netlink_start();
166 if (!res)
167 res = tipc_socket_init();
168 if (res)
169 tipc_core_stop();
170
171 return res;
172}
173
174
175static int __init tipc_init(void)
176{
177 int res;
178
179 if (tipc_log_resize(CONFIG_TIPC_LOG) != 0)
180 warn("Unable to create log buffer\n");
181
182 info("Activated (version " TIPC_MOD_VER ")\n");
183
184 tipc_own_addr = 0;
185 tipc_remote_management = 1;
186 tipc_max_publications = 10000;
187 tipc_max_subscriptions = 2000;
188 tipc_max_ports = CONFIG_TIPC_PORTS;
189 tipc_net_id = 4711;
190
191 res = tipc_core_start();
192 if (res)
193 err("Unable to start in single node mode\n");
194 else
195 info("Started in single node mode\n");
196 return res;
197}
198
199static void __exit tipc_exit(void)
200{
201 tipc_core_stop_net();
202 tipc_core_stop();
203 info("Deactivated\n");
204}
205
206module_init(tipc_init);
207module_exit(tipc_exit);
208
209MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
210MODULE_LICENSE("Dual BSD/GPL");
211MODULE_VERSION(TIPC_MOD_VER);