Loading...
1/*
2 * linux/drivers/mmc/sdio.c
3 *
4 * Copyright 2006-2007 Pierre Ossman
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
10 */
11
12#include <linux/err.h>
13#include <linux/pm_runtime.h>
14
15#include <linux/mmc/host.h>
16#include <linux/mmc/card.h>
17#include <linux/mmc/mmc.h>
18#include <linux/mmc/sdio.h>
19#include <linux/mmc/sdio_func.h>
20#include <linux/mmc/sdio_ids.h>
21
22#include "core.h"
23#include "bus.h"
24#include "sd.h"
25#include "sdio_bus.h"
26#include "mmc_ops.h"
27#include "sd_ops.h"
28#include "sdio_ops.h"
29#include "sdio_cis.h"
30
31static int sdio_read_fbr(struct sdio_func *func)
32{
33 int ret;
34 unsigned char data;
35
36 if (mmc_card_nonstd_func_interface(func->card)) {
37 func->class = SDIO_CLASS_NONE;
38 return 0;
39 }
40
41 ret = mmc_io_rw_direct(func->card, 0, 0,
42 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data);
43 if (ret)
44 goto out;
45
46 data &= 0x0f;
47
48 if (data == 0x0f) {
49 ret = mmc_io_rw_direct(func->card, 0, 0,
50 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF_EXT, 0, &data);
51 if (ret)
52 goto out;
53 }
54
55 func->class = data;
56
57out:
58 return ret;
59}
60
61static int sdio_init_func(struct mmc_card *card, unsigned int fn)
62{
63 int ret;
64 struct sdio_func *func;
65
66 BUG_ON(fn > SDIO_MAX_FUNCS);
67
68 func = sdio_alloc_func(card);
69 if (IS_ERR(func))
70 return PTR_ERR(func);
71
72 func->num = fn;
73
74 if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) {
75 ret = sdio_read_fbr(func);
76 if (ret)
77 goto fail;
78
79 ret = sdio_read_func_cis(func);
80 if (ret)
81 goto fail;
82 } else {
83 func->vendor = func->card->cis.vendor;
84 func->device = func->card->cis.device;
85 func->max_blksize = func->card->cis.blksize;
86 }
87
88 card->sdio_func[fn - 1] = func;
89
90 return 0;
91
92fail:
93 /*
94 * It is okay to remove the function here even though we hold
95 * the host lock as we haven't registered the device yet.
96 */
97 sdio_remove_func(func);
98 return ret;
99}
100
101static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
102{
103 int ret;
104 int cccr_vsn;
105 int uhs = ocr & R4_18V_PRESENT;
106 unsigned char data;
107 unsigned char speed;
108
109 memset(&card->cccr, 0, sizeof(struct sdio_cccr));
110
111 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CCCR, 0, &data);
112 if (ret)
113 goto out;
114
115 cccr_vsn = data & 0x0f;
116
117 if (cccr_vsn > SDIO_CCCR_REV_3_00) {
118 pr_err("%s: unrecognised CCCR structure version %d\n",
119 mmc_hostname(card->host), cccr_vsn);
120 return -EINVAL;
121 }
122
123 card->cccr.sdio_vsn = (data & 0xf0) >> 4;
124
125 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CAPS, 0, &data);
126 if (ret)
127 goto out;
128
129 if (data & SDIO_CCCR_CAP_SMB)
130 card->cccr.multi_block = 1;
131 if (data & SDIO_CCCR_CAP_LSC)
132 card->cccr.low_speed = 1;
133 if (data & SDIO_CCCR_CAP_4BLS)
134 card->cccr.wide_bus = 1;
135
136 if (cccr_vsn >= SDIO_CCCR_REV_1_10) {
137 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_POWER, 0, &data);
138 if (ret)
139 goto out;
140
141 if (data & SDIO_POWER_SMPC)
142 card->cccr.high_power = 1;
143 }
144
145 if (cccr_vsn >= SDIO_CCCR_REV_1_20) {
146 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
147 if (ret)
148 goto out;
149
150 card->scr.sda_spec3 = 0;
151 card->sw_caps.sd3_bus_mode = 0;
152 card->sw_caps.sd3_drv_type = 0;
153 if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
154 card->scr.sda_spec3 = 1;
155 ret = mmc_io_rw_direct(card, 0, 0,
156 SDIO_CCCR_UHS, 0, &data);
157 if (ret)
158 goto out;
159
160 if (mmc_host_uhs(card->host)) {
161 if (data & SDIO_UHS_DDR50)
162 card->sw_caps.sd3_bus_mode
163 |= SD_MODE_UHS_DDR50;
164
165 if (data & SDIO_UHS_SDR50)
166 card->sw_caps.sd3_bus_mode
167 |= SD_MODE_UHS_SDR50;
168
169 if (data & SDIO_UHS_SDR104)
170 card->sw_caps.sd3_bus_mode
171 |= SD_MODE_UHS_SDR104;
172 }
173
174 ret = mmc_io_rw_direct(card, 0, 0,
175 SDIO_CCCR_DRIVE_STRENGTH, 0, &data);
176 if (ret)
177 goto out;
178
179 if (data & SDIO_DRIVE_SDTA)
180 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_A;
181 if (data & SDIO_DRIVE_SDTC)
182 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C;
183 if (data & SDIO_DRIVE_SDTD)
184 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D;
185 }
186
187 /* if no uhs mode ensure we check for high speed */
188 if (!card->sw_caps.sd3_bus_mode) {
189 if (speed & SDIO_SPEED_SHS) {
190 card->cccr.high_speed = 1;
191 card->sw_caps.hs_max_dtr = 50000000;
192 } else {
193 card->cccr.high_speed = 0;
194 card->sw_caps.hs_max_dtr = 25000000;
195 }
196 }
197 }
198
199out:
200 return ret;
201}
202
203static int sdio_enable_wide(struct mmc_card *card)
204{
205 int ret;
206 u8 ctrl;
207
208 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
209 return 0;
210
211 if (card->cccr.low_speed && !card->cccr.wide_bus)
212 return 0;
213
214 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
215 if (ret)
216 return ret;
217
218 if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
219 pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
220 mmc_hostname(card->host), ctrl);
221
222 /* set as 4-bit bus width */
223 ctrl &= ~SDIO_BUS_WIDTH_MASK;
224 ctrl |= SDIO_BUS_WIDTH_4BIT;
225
226 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
227 if (ret)
228 return ret;
229
230 return 1;
231}
232
233/*
234 * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1)
235 * of the card. This may be required on certain setups of boards,
236 * controllers and embedded sdio device which do not need the card's
237 * pull-up. As a result, card detection is disabled and power is saved.
238 */
239static int sdio_disable_cd(struct mmc_card *card)
240{
241 int ret;
242 u8 ctrl;
243
244 if (!mmc_card_disable_cd(card))
245 return 0;
246
247 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
248 if (ret)
249 return ret;
250
251 ctrl |= SDIO_BUS_CD_DISABLE;
252
253 return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
254}
255
256/*
257 * Devices that remain active during a system suspend are
258 * put back into 1-bit mode.
259 */
260static int sdio_disable_wide(struct mmc_card *card)
261{
262 int ret;
263 u8 ctrl;
264
265 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
266 return 0;
267
268 if (card->cccr.low_speed && !card->cccr.wide_bus)
269 return 0;
270
271 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
272 if (ret)
273 return ret;
274
275 if (!(ctrl & SDIO_BUS_WIDTH_4BIT))
276 return 0;
277
278 ctrl &= ~SDIO_BUS_WIDTH_4BIT;
279 ctrl |= SDIO_BUS_ASYNC_INT;
280
281 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
282 if (ret)
283 return ret;
284
285 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_1);
286
287 return 0;
288}
289
290
291static int sdio_enable_4bit_bus(struct mmc_card *card)
292{
293 int err;
294
295 if (card->type == MMC_TYPE_SDIO)
296 return sdio_enable_wide(card);
297
298 if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
299 (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
300 err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
301 if (err)
302 return err;
303 } else
304 return 0;
305
306 err = sdio_enable_wide(card);
307 if (err <= 0)
308 mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);
309
310 return err;
311}
312
313
314/*
315 * Test if the card supports high-speed mode and, if so, switch to it.
316 */
317static int mmc_sdio_switch_hs(struct mmc_card *card, int enable)
318{
319 int ret;
320 u8 speed;
321
322 if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
323 return 0;
324
325 if (!card->cccr.high_speed)
326 return 0;
327
328 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
329 if (ret)
330 return ret;
331
332 if (enable)
333 speed |= SDIO_SPEED_EHS;
334 else
335 speed &= ~SDIO_SPEED_EHS;
336
337 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
338 if (ret)
339 return ret;
340
341 return 1;
342}
343
344/*
345 * Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported.
346 */
347static int sdio_enable_hs(struct mmc_card *card)
348{
349 int ret;
350
351 ret = mmc_sdio_switch_hs(card, true);
352 if (ret <= 0 || card->type == MMC_TYPE_SDIO)
353 return ret;
354
355 ret = mmc_sd_switch_hs(card);
356 if (ret <= 0)
357 mmc_sdio_switch_hs(card, false);
358
359 return ret;
360}
361
362static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
363{
364 unsigned max_dtr;
365
366 if (mmc_card_highspeed(card)) {
367 /*
368 * The SDIO specification doesn't mention how
369 * the CIS transfer speed register relates to
370 * high-speed, but it seems that 50 MHz is
371 * mandatory.
372 */
373 max_dtr = 50000000;
374 } else {
375 max_dtr = card->cis.max_dtr;
376 }
377
378 if (card->type == MMC_TYPE_SD_COMBO)
379 max_dtr = min(max_dtr, mmc_sd_get_max_clock(card));
380
381 return max_dtr;
382}
383
384static unsigned char host_drive_to_sdio_drive(int host_strength)
385{
386 switch (host_strength) {
387 case MMC_SET_DRIVER_TYPE_A:
388 return SDIO_DTSx_SET_TYPE_A;
389 case MMC_SET_DRIVER_TYPE_B:
390 return SDIO_DTSx_SET_TYPE_B;
391 case MMC_SET_DRIVER_TYPE_C:
392 return SDIO_DTSx_SET_TYPE_C;
393 case MMC_SET_DRIVER_TYPE_D:
394 return SDIO_DTSx_SET_TYPE_D;
395 default:
396 return SDIO_DTSx_SET_TYPE_B;
397 }
398}
399
400static void sdio_select_driver_type(struct mmc_card *card)
401{
402 int host_drv_type = SD_DRIVER_TYPE_B;
403 int card_drv_type = SD_DRIVER_TYPE_B;
404 int drive_strength;
405 unsigned char card_strength;
406 int err;
407
408 /*
409 * If the host doesn't support any of the Driver Types A,C or D,
410 * or there is no board specific handler then default Driver
411 * Type B is used.
412 */
413 if (!(card->host->caps &
414 (MMC_CAP_DRIVER_TYPE_A |
415 MMC_CAP_DRIVER_TYPE_C |
416 MMC_CAP_DRIVER_TYPE_D)))
417 return;
418
419 if (!card->host->ops->select_drive_strength)
420 return;
421
422 if (card->host->caps & MMC_CAP_DRIVER_TYPE_A)
423 host_drv_type |= SD_DRIVER_TYPE_A;
424
425 if (card->host->caps & MMC_CAP_DRIVER_TYPE_C)
426 host_drv_type |= SD_DRIVER_TYPE_C;
427
428 if (card->host->caps & MMC_CAP_DRIVER_TYPE_D)
429 host_drv_type |= SD_DRIVER_TYPE_D;
430
431 if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A)
432 card_drv_type |= SD_DRIVER_TYPE_A;
433
434 if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C)
435 card_drv_type |= SD_DRIVER_TYPE_C;
436
437 if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_D)
438 card_drv_type |= SD_DRIVER_TYPE_D;
439
440 /*
441 * The drive strength that the hardware can support
442 * depends on the board design. Pass the appropriate
443 * information and let the hardware specific code
444 * return what is possible given the options
445 */
446 drive_strength = card->host->ops->select_drive_strength(
447 card->sw_caps.uhs_max_dtr,
448 host_drv_type, card_drv_type);
449
450 /* if error just use default for drive strength B */
451 err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_DRIVE_STRENGTH, 0,
452 &card_strength);
453 if (err)
454 return;
455
456 card_strength &= ~(SDIO_DRIVE_DTSx_MASK<<SDIO_DRIVE_DTSx_SHIFT);
457 card_strength |= host_drive_to_sdio_drive(drive_strength);
458
459 err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_DRIVE_STRENGTH,
460 card_strength, NULL);
461
462 /* if error default to drive strength B */
463 if (!err)
464 mmc_set_driver_type(card->host, drive_strength);
465}
466
467
468static int sdio_set_bus_speed_mode(struct mmc_card *card)
469{
470 unsigned int bus_speed, timing;
471 int err;
472 unsigned char speed;
473
474 /*
475 * If the host doesn't support any of the UHS-I modes, fallback on
476 * default speed.
477 */
478 if (!mmc_host_uhs(card->host))
479 return 0;
480
481 bus_speed = SDIO_SPEED_SDR12;
482 timing = MMC_TIMING_UHS_SDR12;
483 if ((card->host->caps & MMC_CAP_UHS_SDR104) &&
484 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) {
485 bus_speed = SDIO_SPEED_SDR104;
486 timing = MMC_TIMING_UHS_SDR104;
487 card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
488 card->sd_bus_speed = UHS_SDR104_BUS_SPEED;
489 } else if ((card->host->caps & MMC_CAP_UHS_DDR50) &&
490 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) {
491 bus_speed = SDIO_SPEED_DDR50;
492 timing = MMC_TIMING_UHS_DDR50;
493 card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
494 card->sd_bus_speed = UHS_DDR50_BUS_SPEED;
495 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
496 MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode &
497 SD_MODE_UHS_SDR50)) {
498 bus_speed = SDIO_SPEED_SDR50;
499 timing = MMC_TIMING_UHS_SDR50;
500 card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
501 card->sd_bus_speed = UHS_SDR50_BUS_SPEED;
502 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
503 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) &&
504 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) {
505 bus_speed = SDIO_SPEED_SDR25;
506 timing = MMC_TIMING_UHS_SDR25;
507 card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
508 card->sd_bus_speed = UHS_SDR25_BUS_SPEED;
509 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
510 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 |
511 MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode &
512 SD_MODE_UHS_SDR12)) {
513 bus_speed = SDIO_SPEED_SDR12;
514 timing = MMC_TIMING_UHS_SDR12;
515 card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
516 card->sd_bus_speed = UHS_SDR12_BUS_SPEED;
517 }
518
519 err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
520 if (err)
521 return err;
522
523 speed &= ~SDIO_SPEED_BSS_MASK;
524 speed |= bus_speed;
525 err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
526 if (err)
527 return err;
528
529 if (bus_speed) {
530 mmc_set_timing(card->host, timing);
531 mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr);
532 }
533
534 return 0;
535}
536
537/*
538 * UHS-I specific initialization procedure
539 */
540static int mmc_sdio_init_uhs_card(struct mmc_card *card)
541{
542 int err;
543
544 if (!card->scr.sda_spec3)
545 return 0;
546
547 /*
548 * Switch to wider bus (if supported).
549 */
550 if (card->host->caps & MMC_CAP_4_BIT_DATA) {
551 err = sdio_enable_4bit_bus(card);
552 if (err > 0) {
553 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
554 err = 0;
555 }
556 }
557
558 /* Set the driver strength for the card */
559 sdio_select_driver_type(card);
560
561 /* Set bus speed mode of the card */
562 err = sdio_set_bus_speed_mode(card);
563 if (err)
564 goto out;
565
566 /*
567 * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
568 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
569 */
570 if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning &&
571 ((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) ||
572 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104))) {
573 mmc_host_clk_hold(card->host);
574 err = card->host->ops->execute_tuning(card->host,
575 MMC_SEND_TUNING_BLOCK);
576 mmc_host_clk_release(card->host);
577 }
578
579out:
580
581 return err;
582}
583
584/*
585 * Handle the detection and initialisation of a card.
586 *
587 * In the case of a resume, "oldcard" will contain the card
588 * we're trying to reinitialise.
589 */
590static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
591 struct mmc_card *oldcard, int powered_resume)
592{
593 struct mmc_card *card;
594 int err;
595 int retries = 10;
596 u32 rocr = 0;
597 u32 ocr_card = ocr;
598
599 BUG_ON(!host);
600 WARN_ON(!host->claimed);
601
602 /* to query card if 1.8V signalling is supported */
603 if (mmc_host_uhs(host))
604 ocr |= R4_18V_PRESENT;
605
606try_again:
607 if (!retries) {
608 pr_warning("%s: Skipping voltage switch\n",
609 mmc_hostname(host));
610 ocr &= ~R4_18V_PRESENT;
611 }
612
613 /*
614 * Inform the card of the voltage
615 */
616 if (!powered_resume) {
617 err = mmc_send_io_op_cond(host, ocr, &rocr);
618 if (err)
619 goto err;
620 }
621
622 /*
623 * For SPI, enable CRC as appropriate.
624 */
625 if (mmc_host_is_spi(host)) {
626 err = mmc_spi_set_crc(host, use_spi_crc);
627 if (err)
628 goto err;
629 }
630
631 /*
632 * Allocate card structure.
633 */
634 card = mmc_alloc_card(host, NULL);
635 if (IS_ERR(card)) {
636 err = PTR_ERR(card);
637 goto err;
638 }
639
640 if ((rocr & R4_MEMORY_PRESENT) &&
641 mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) {
642 card->type = MMC_TYPE_SD_COMBO;
643
644 if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
645 memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) {
646 mmc_remove_card(card);
647 return -ENOENT;
648 }
649 } else {
650 card->type = MMC_TYPE_SDIO;
651
652 if (oldcard && oldcard->type != MMC_TYPE_SDIO) {
653 mmc_remove_card(card);
654 return -ENOENT;
655 }
656 }
657
658 /*
659 * Call the optional HC's init_card function to handle quirks.
660 */
661 if (host->ops->init_card)
662 host->ops->init_card(host, card);
663
664 /*
665 * If the host and card support UHS-I mode request the card
666 * to switch to 1.8V signaling level. No 1.8v signalling if
667 * UHS mode is not enabled to maintain compatibility and some
668 * systems that claim 1.8v signalling in fact do not support
669 * it.
670 */
671 if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) {
672 err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
673 ocr);
674 if (err == -EAGAIN) {
675 sdio_reset(host);
676 mmc_go_idle(host);
677 mmc_send_if_cond(host, host->ocr_avail);
678 mmc_remove_card(card);
679 retries--;
680 goto try_again;
681 } else if (err) {
682 ocr &= ~R4_18V_PRESENT;
683 }
684 err = 0;
685 } else {
686 ocr &= ~R4_18V_PRESENT;
687 }
688
689 /*
690 * For native busses: set card RCA and quit open drain mode.
691 */
692 if (!powered_resume && !mmc_host_is_spi(host)) {
693 err = mmc_send_relative_addr(host, &card->rca);
694 if (err)
695 goto remove;
696
697 /*
698 * Update oldcard with the new RCA received from the SDIO
699 * device -- we're doing this so that it's updated in the
700 * "card" struct when oldcard overwrites that later.
701 */
702 if (oldcard)
703 oldcard->rca = card->rca;
704 }
705
706 /*
707 * Read CSD, before selecting the card
708 */
709 if (!oldcard && card->type == MMC_TYPE_SD_COMBO) {
710 err = mmc_sd_get_csd(host, card);
711 if (err)
712 return err;
713
714 mmc_decode_cid(card);
715 }
716
717 /*
718 * Select card, as all following commands rely on that.
719 */
720 if (!powered_resume && !mmc_host_is_spi(host)) {
721 err = mmc_select_card(card);
722 if (err)
723 goto remove;
724 }
725
726 if (card->quirks & MMC_QUIRK_NONSTD_SDIO) {
727 /*
728 * This is non-standard SDIO device, meaning it doesn't
729 * have any CIA (Common I/O area) registers present.
730 * It's host's responsibility to fill cccr and cis
731 * structures in init_card().
732 */
733 mmc_set_clock(host, card->cis.max_dtr);
734
735 if (card->cccr.high_speed) {
736 mmc_card_set_highspeed(card);
737 mmc_set_timing(card->host, MMC_TIMING_SD_HS);
738 }
739
740 goto finish;
741 }
742
743 /*
744 * Read the common registers.
745 */
746 err = sdio_read_cccr(card, ocr);
747 if (err)
748 goto remove;
749
750 /*
751 * Read the common CIS tuples.
752 */
753 err = sdio_read_common_cis(card);
754 if (err)
755 goto remove;
756
757 if (oldcard) {
758 int same = (card->cis.vendor == oldcard->cis.vendor &&
759 card->cis.device == oldcard->cis.device);
760 mmc_remove_card(card);
761 if (!same)
762 return -ENOENT;
763
764 card = oldcard;
765 }
766 card->ocr = ocr_card;
767 mmc_fixup_device(card, NULL);
768
769 if (card->type == MMC_TYPE_SD_COMBO) {
770 err = mmc_sd_setup_card(host, card, oldcard != NULL);
771 /* handle as SDIO-only card if memory init failed */
772 if (err) {
773 mmc_go_idle(host);
774 if (mmc_host_is_spi(host))
775 /* should not fail, as it worked previously */
776 mmc_spi_set_crc(host, use_spi_crc);
777 card->type = MMC_TYPE_SDIO;
778 } else
779 card->dev.type = &sd_type;
780 }
781
782 /*
783 * If needed, disconnect card detection pull-up resistor.
784 */
785 err = sdio_disable_cd(card);
786 if (err)
787 goto remove;
788
789 /* Initialization sequence for UHS-I cards */
790 /* Only if card supports 1.8v and UHS signaling */
791 if ((ocr & R4_18V_PRESENT) && card->sw_caps.sd3_bus_mode) {
792 err = mmc_sdio_init_uhs_card(card);
793 if (err)
794 goto remove;
795
796 /* Card is an ultra-high-speed card */
797 mmc_card_set_uhs(card);
798 } else {
799 /*
800 * Switch to high-speed (if supported).
801 */
802 err = sdio_enable_hs(card);
803 if (err > 0)
804 mmc_sd_go_highspeed(card);
805 else if (err)
806 goto remove;
807
808 /*
809 * Change to the card's maximum speed.
810 */
811 mmc_set_clock(host, mmc_sdio_get_max_clock(card));
812
813 /*
814 * Switch to wider bus (if supported).
815 */
816 err = sdio_enable_4bit_bus(card);
817 if (err > 0)
818 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
819 else if (err)
820 goto remove;
821 }
822finish:
823 if (!oldcard)
824 host->card = card;
825 return 0;
826
827remove:
828 if (!oldcard)
829 mmc_remove_card(card);
830
831err:
832 return err;
833}
834
835/*
836 * Host is being removed. Free up the current card.
837 */
838static void mmc_sdio_remove(struct mmc_host *host)
839{
840 int i;
841
842 BUG_ON(!host);
843 BUG_ON(!host->card);
844
845 for (i = 0;i < host->card->sdio_funcs;i++) {
846 if (host->card->sdio_func[i]) {
847 sdio_remove_func(host->card->sdio_func[i]);
848 host->card->sdio_func[i] = NULL;
849 }
850 }
851
852 mmc_remove_card(host->card);
853 host->card = NULL;
854}
855
856/*
857 * Card detection - card is alive.
858 */
859static int mmc_sdio_alive(struct mmc_host *host)
860{
861 return mmc_select_card(host->card);
862}
863
864/*
865 * Card detection callback from host.
866 */
867static void mmc_sdio_detect(struct mmc_host *host)
868{
869 int err;
870
871 BUG_ON(!host);
872 BUG_ON(!host->card);
873
874 /* Make sure card is powered before detecting it */
875 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
876 err = pm_runtime_get_sync(&host->card->dev);
877 if (err < 0) {
878 pm_runtime_put_noidle(&host->card->dev);
879 goto out;
880 }
881 }
882
883 mmc_claim_host(host);
884
885 /*
886 * Just check if our card has been removed.
887 */
888 err = _mmc_detect_card_removed(host);
889
890 mmc_release_host(host);
891
892 /*
893 * Tell PM core it's OK to power off the card now.
894 *
895 * The _sync variant is used in order to ensure that the card
896 * is left powered off in case an error occurred, and the card
897 * is going to be removed.
898 *
899 * Since there is no specific reason to believe a new user
900 * is about to show up at this point, the _sync variant is
901 * desirable anyway.
902 */
903 if (host->caps & MMC_CAP_POWER_OFF_CARD)
904 pm_runtime_put_sync(&host->card->dev);
905
906out:
907 if (err) {
908 mmc_sdio_remove(host);
909
910 mmc_claim_host(host);
911 mmc_detach_bus(host);
912 mmc_power_off(host);
913 mmc_release_host(host);
914 }
915}
916
917/*
918 * SDIO pre_suspend. We need to suspend all functions separately.
919 * Therefore all registered functions must have drivers with suspend
920 * and resume methods. Failing that we simply remove the whole card.
921 */
922static int mmc_sdio_pre_suspend(struct mmc_host *host)
923{
924 int i, err = 0;
925
926 for (i = 0; i < host->card->sdio_funcs; i++) {
927 struct sdio_func *func = host->card->sdio_func[i];
928 if (func && sdio_func_present(func) && func->dev.driver) {
929 const struct dev_pm_ops *pmops = func->dev.driver->pm;
930 if (!pmops || !pmops->suspend || !pmops->resume) {
931 /* force removal of entire card in that case */
932 err = -ENOSYS;
933 break;
934 }
935 }
936 }
937
938 return err;
939}
940
941/*
942 * SDIO suspend. Suspend all functions separately.
943 */
944static int mmc_sdio_suspend(struct mmc_host *host)
945{
946 int i, err = 0;
947
948 for (i = 0; i < host->card->sdio_funcs; i++) {
949 struct sdio_func *func = host->card->sdio_func[i];
950 if (func && sdio_func_present(func) && func->dev.driver) {
951 const struct dev_pm_ops *pmops = func->dev.driver->pm;
952 err = pmops->suspend(&func->dev);
953 if (err)
954 break;
955 }
956 }
957 while (err && --i >= 0) {
958 struct sdio_func *func = host->card->sdio_func[i];
959 if (func && sdio_func_present(func) && func->dev.driver) {
960 const struct dev_pm_ops *pmops = func->dev.driver->pm;
961 pmops->resume(&func->dev);
962 }
963 }
964
965 if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
966 mmc_claim_host(host);
967 sdio_disable_wide(host->card);
968 mmc_release_host(host);
969 }
970
971 if (!err && !mmc_card_keep_power(host))
972 mmc_power_off(host);
973
974 return err;
975}
976
977static int mmc_sdio_resume(struct mmc_host *host)
978{
979 int i, err = 0;
980
981 BUG_ON(!host);
982 BUG_ON(!host->card);
983
984 /* Basic card reinitialization. */
985 mmc_claim_host(host);
986
987 /* Restore power if needed */
988 if (!mmc_card_keep_power(host)) {
989 mmc_power_up(host, host->card->ocr);
990 /*
991 * Tell runtime PM core we just powered up the card,
992 * since it still believes the card is powered off.
993 * Note that currently runtime PM is only enabled
994 * for SDIO cards that are MMC_CAP_POWER_OFF_CARD
995 */
996 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
997 pm_runtime_disable(&host->card->dev);
998 pm_runtime_set_active(&host->card->dev);
999 pm_runtime_enable(&host->card->dev);
1000 }
1001 }
1002
1003 /* No need to reinitialize powered-resumed nonremovable cards */
1004 if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
1005 sdio_reset(host);
1006 mmc_go_idle(host);
1007 err = mmc_sdio_init_card(host, host->card->ocr, host->card,
1008 mmc_card_keep_power(host));
1009 } else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
1010 /* We may have switched to 1-bit mode during suspend */
1011 err = sdio_enable_4bit_bus(host->card);
1012 if (err > 0) {
1013 mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
1014 err = 0;
1015 }
1016 }
1017
1018 if (!err && host->sdio_irqs)
1019 wake_up_process(host->sdio_irq_thread);
1020 mmc_release_host(host);
1021
1022 /*
1023 * If the card looked to be the same as before suspending, then
1024 * we proceed to resume all card functions. If one of them returns
1025 * an error then we simply return that error to the core and the
1026 * card will be redetected as new. It is the responsibility of
1027 * the function driver to perform further tests with the extra
1028 * knowledge it has of the card to confirm the card is indeed the
1029 * same as before suspending (same MAC address for network cards,
1030 * etc.) and return an error otherwise.
1031 */
1032 for (i = 0; !err && i < host->card->sdio_funcs; i++) {
1033 struct sdio_func *func = host->card->sdio_func[i];
1034 if (func && sdio_func_present(func) && func->dev.driver) {
1035 const struct dev_pm_ops *pmops = func->dev.driver->pm;
1036 err = pmops->resume(&func->dev);
1037 }
1038 }
1039
1040 host->pm_flags &= ~MMC_PM_KEEP_POWER;
1041 return err;
1042}
1043
1044static int mmc_sdio_power_restore(struct mmc_host *host)
1045{
1046 int ret;
1047
1048 BUG_ON(!host);
1049 BUG_ON(!host->card);
1050
1051 mmc_claim_host(host);
1052
1053 /*
1054 * Reset the card by performing the same steps that are taken by
1055 * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
1056 *
1057 * sdio_reset() is technically not needed. Having just powered up the
1058 * hardware, it should already be in reset state. However, some
1059 * platforms (such as SD8686 on OLPC) do not instantly cut power,
1060 * meaning that a reset is required when restoring power soon after
1061 * powering off. It is harmless in other cases.
1062 *
1063 * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
1064 * is not necessary for non-removable cards. However, it is required
1065 * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
1066 * harmless in other situations.
1067 *
1068 */
1069
1070 sdio_reset(host);
1071 mmc_go_idle(host);
1072 mmc_send_if_cond(host, host->ocr_avail);
1073
1074 ret = mmc_send_io_op_cond(host, 0, NULL);
1075 if (ret)
1076 goto out;
1077
1078 ret = mmc_sdio_init_card(host, host->card->ocr, host->card,
1079 mmc_card_keep_power(host));
1080 if (!ret && host->sdio_irqs)
1081 mmc_signal_sdio_irq(host);
1082
1083out:
1084 mmc_release_host(host);
1085
1086 return ret;
1087}
1088
1089static int mmc_sdio_runtime_suspend(struct mmc_host *host)
1090{
1091 /* No references to the card, cut the power to it. */
1092 mmc_power_off(host);
1093 return 0;
1094}
1095
1096static int mmc_sdio_runtime_resume(struct mmc_host *host)
1097{
1098 /* Restore power and re-initialize. */
1099 mmc_power_up(host, host->card->ocr);
1100 return mmc_sdio_power_restore(host);
1101}
1102
1103static const struct mmc_bus_ops mmc_sdio_ops = {
1104 .remove = mmc_sdio_remove,
1105 .detect = mmc_sdio_detect,
1106 .pre_suspend = mmc_sdio_pre_suspend,
1107 .suspend = mmc_sdio_suspend,
1108 .resume = mmc_sdio_resume,
1109 .runtime_suspend = mmc_sdio_runtime_suspend,
1110 .runtime_resume = mmc_sdio_runtime_resume,
1111 .power_restore = mmc_sdio_power_restore,
1112 .alive = mmc_sdio_alive,
1113};
1114
1115
1116/*
1117 * Starting point for SDIO card init.
1118 */
1119int mmc_attach_sdio(struct mmc_host *host)
1120{
1121 int err, i, funcs;
1122 u32 ocr, rocr;
1123 struct mmc_card *card;
1124
1125 BUG_ON(!host);
1126 WARN_ON(!host->claimed);
1127
1128 err = mmc_send_io_op_cond(host, 0, &ocr);
1129 if (err)
1130 return err;
1131
1132 mmc_attach_bus(host, &mmc_sdio_ops);
1133 if (host->ocr_avail_sdio)
1134 host->ocr_avail = host->ocr_avail_sdio;
1135
1136
1137 rocr = mmc_select_voltage(host, ocr);
1138
1139 /*
1140 * Can we support the voltage(s) of the card(s)?
1141 */
1142 if (!rocr) {
1143 err = -EINVAL;
1144 goto err;
1145 }
1146
1147 /*
1148 * Detect and init the card.
1149 */
1150 err = mmc_sdio_init_card(host, rocr, NULL, 0);
1151 if (err)
1152 goto err;
1153
1154 card = host->card;
1155
1156 /*
1157 * Enable runtime PM only if supported by host+card+board
1158 */
1159 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
1160 /*
1161 * Let runtime PM core know our card is active
1162 */
1163 err = pm_runtime_set_active(&card->dev);
1164 if (err)
1165 goto remove;
1166
1167 /*
1168 * Enable runtime PM for this card
1169 */
1170 pm_runtime_enable(&card->dev);
1171 }
1172
1173 /*
1174 * The number of functions on the card is encoded inside
1175 * the ocr.
1176 */
1177 funcs = (ocr & 0x70000000) >> 28;
1178 card->sdio_funcs = 0;
1179
1180 /*
1181 * Initialize (but don't add) all present functions.
1182 */
1183 for (i = 0; i < funcs; i++, card->sdio_funcs++) {
1184 err = sdio_init_func(host->card, i + 1);
1185 if (err)
1186 goto remove;
1187
1188 /*
1189 * Enable Runtime PM for this func (if supported)
1190 */
1191 if (host->caps & MMC_CAP_POWER_OFF_CARD)
1192 pm_runtime_enable(&card->sdio_func[i]->dev);
1193 }
1194
1195 /*
1196 * First add the card to the driver model...
1197 */
1198 mmc_release_host(host);
1199 err = mmc_add_card(host->card);
1200 if (err)
1201 goto remove_added;
1202
1203 /*
1204 * ...then the SDIO functions.
1205 */
1206 for (i = 0;i < funcs;i++) {
1207 err = sdio_add_func(host->card->sdio_func[i]);
1208 if (err)
1209 goto remove_added;
1210 }
1211
1212 mmc_claim_host(host);
1213 return 0;
1214
1215
1216remove_added:
1217 /* Remove without lock if the device has been added. */
1218 mmc_sdio_remove(host);
1219 mmc_claim_host(host);
1220remove:
1221 /* And with lock if it hasn't been added. */
1222 mmc_release_host(host);
1223 if (host->card)
1224 mmc_sdio_remove(host);
1225 mmc_claim_host(host);
1226err:
1227 mmc_detach_bus(host);
1228
1229 pr_err("%s: error %d whilst initialising SDIO card\n",
1230 mmc_hostname(host), err);
1231
1232 return err;
1233}
1234
1/*
2 * linux/drivers/mmc/sdio.c
3 *
4 * Copyright 2006-2007 Pierre Ossman
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
10 */
11
12#include <linux/err.h>
13#include <linux/pm_runtime.h>
14
15#include <linux/mmc/host.h>
16#include <linux/mmc/card.h>
17#include <linux/mmc/sdio.h>
18#include <linux/mmc/sdio_func.h>
19#include <linux/mmc/sdio_ids.h>
20
21#include "core.h"
22#include "bus.h"
23#include "sd.h"
24#include "sdio_bus.h"
25#include "mmc_ops.h"
26#include "sd_ops.h"
27#include "sdio_ops.h"
28#include "sdio_cis.h"
29
30static int sdio_read_fbr(struct sdio_func *func)
31{
32 int ret;
33 unsigned char data;
34
35 if (mmc_card_nonstd_func_interface(func->card)) {
36 func->class = SDIO_CLASS_NONE;
37 return 0;
38 }
39
40 ret = mmc_io_rw_direct(func->card, 0, 0,
41 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data);
42 if (ret)
43 goto out;
44
45 data &= 0x0f;
46
47 if (data == 0x0f) {
48 ret = mmc_io_rw_direct(func->card, 0, 0,
49 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF_EXT, 0, &data);
50 if (ret)
51 goto out;
52 }
53
54 func->class = data;
55
56out:
57 return ret;
58}
59
60static int sdio_init_func(struct mmc_card *card, unsigned int fn)
61{
62 int ret;
63 struct sdio_func *func;
64
65 BUG_ON(fn > SDIO_MAX_FUNCS);
66
67 func = sdio_alloc_func(card);
68 if (IS_ERR(func))
69 return PTR_ERR(func);
70
71 func->num = fn;
72
73 if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) {
74 ret = sdio_read_fbr(func);
75 if (ret)
76 goto fail;
77
78 ret = sdio_read_func_cis(func);
79 if (ret)
80 goto fail;
81 } else {
82 func->vendor = func->card->cis.vendor;
83 func->device = func->card->cis.device;
84 func->max_blksize = func->card->cis.blksize;
85 }
86
87 card->sdio_func[fn - 1] = func;
88
89 return 0;
90
91fail:
92 /*
93 * It is okay to remove the function here even though we hold
94 * the host lock as we haven't registered the device yet.
95 */
96 sdio_remove_func(func);
97 return ret;
98}
99
100static int sdio_read_cccr(struct mmc_card *card)
101{
102 int ret;
103 int cccr_vsn;
104 unsigned char data;
105
106 memset(&card->cccr, 0, sizeof(struct sdio_cccr));
107
108 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CCCR, 0, &data);
109 if (ret)
110 goto out;
111
112 cccr_vsn = data & 0x0f;
113
114 if (cccr_vsn > SDIO_CCCR_REV_1_20) {
115 printk(KERN_ERR "%s: unrecognised CCCR structure version %d\n",
116 mmc_hostname(card->host), cccr_vsn);
117 return -EINVAL;
118 }
119
120 card->cccr.sdio_vsn = (data & 0xf0) >> 4;
121
122 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CAPS, 0, &data);
123 if (ret)
124 goto out;
125
126 if (data & SDIO_CCCR_CAP_SMB)
127 card->cccr.multi_block = 1;
128 if (data & SDIO_CCCR_CAP_LSC)
129 card->cccr.low_speed = 1;
130 if (data & SDIO_CCCR_CAP_4BLS)
131 card->cccr.wide_bus = 1;
132
133 if (cccr_vsn >= SDIO_CCCR_REV_1_10) {
134 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_POWER, 0, &data);
135 if (ret)
136 goto out;
137
138 if (data & SDIO_POWER_SMPC)
139 card->cccr.high_power = 1;
140 }
141
142 if (cccr_vsn >= SDIO_CCCR_REV_1_20) {
143 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &data);
144 if (ret)
145 goto out;
146
147 if (data & SDIO_SPEED_SHS)
148 card->cccr.high_speed = 1;
149 }
150
151out:
152 return ret;
153}
154
155static int sdio_enable_wide(struct mmc_card *card)
156{
157 int ret;
158 u8 ctrl;
159
160 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
161 return 0;
162
163 if (card->cccr.low_speed && !card->cccr.wide_bus)
164 return 0;
165
166 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
167 if (ret)
168 return ret;
169
170 ctrl |= SDIO_BUS_WIDTH_4BIT;
171
172 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
173 if (ret)
174 return ret;
175
176 return 1;
177}
178
179/*
180 * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1)
181 * of the card. This may be required on certain setups of boards,
182 * controllers and embedded sdio device which do not need the card's
183 * pull-up. As a result, card detection is disabled and power is saved.
184 */
185static int sdio_disable_cd(struct mmc_card *card)
186{
187 int ret;
188 u8 ctrl;
189
190 if (!mmc_card_disable_cd(card))
191 return 0;
192
193 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
194 if (ret)
195 return ret;
196
197 ctrl |= SDIO_BUS_CD_DISABLE;
198
199 return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
200}
201
202/*
203 * Devices that remain active during a system suspend are
204 * put back into 1-bit mode.
205 */
206static int sdio_disable_wide(struct mmc_card *card)
207{
208 int ret;
209 u8 ctrl;
210
211 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
212 return 0;
213
214 if (card->cccr.low_speed && !card->cccr.wide_bus)
215 return 0;
216
217 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
218 if (ret)
219 return ret;
220
221 if (!(ctrl & SDIO_BUS_WIDTH_4BIT))
222 return 0;
223
224 ctrl &= ~SDIO_BUS_WIDTH_4BIT;
225 ctrl |= SDIO_BUS_ASYNC_INT;
226
227 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
228 if (ret)
229 return ret;
230
231 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_1);
232
233 return 0;
234}
235
236
237static int sdio_enable_4bit_bus(struct mmc_card *card)
238{
239 int err;
240
241 if (card->type == MMC_TYPE_SDIO)
242 return sdio_enable_wide(card);
243
244 if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
245 (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
246 err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
247 if (err)
248 return err;
249 } else
250 return 0;
251
252 err = sdio_enable_wide(card);
253 if (err <= 0)
254 mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);
255
256 return err;
257}
258
259
260/*
261 * Test if the card supports high-speed mode and, if so, switch to it.
262 */
263static int mmc_sdio_switch_hs(struct mmc_card *card, int enable)
264{
265 int ret;
266 u8 speed;
267
268 if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
269 return 0;
270
271 if (!card->cccr.high_speed)
272 return 0;
273
274 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
275 if (ret)
276 return ret;
277
278 if (enable)
279 speed |= SDIO_SPEED_EHS;
280 else
281 speed &= ~SDIO_SPEED_EHS;
282
283 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
284 if (ret)
285 return ret;
286
287 return 1;
288}
289
290/*
291 * Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported.
292 */
293static int sdio_enable_hs(struct mmc_card *card)
294{
295 int ret;
296
297 ret = mmc_sdio_switch_hs(card, true);
298 if (ret <= 0 || card->type == MMC_TYPE_SDIO)
299 return ret;
300
301 ret = mmc_sd_switch_hs(card);
302 if (ret <= 0)
303 mmc_sdio_switch_hs(card, false);
304
305 return ret;
306}
307
308static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
309{
310 unsigned max_dtr;
311
312 if (mmc_card_highspeed(card)) {
313 /*
314 * The SDIO specification doesn't mention how
315 * the CIS transfer speed register relates to
316 * high-speed, but it seems that 50 MHz is
317 * mandatory.
318 */
319 max_dtr = 50000000;
320 } else {
321 max_dtr = card->cis.max_dtr;
322 }
323
324 if (card->type == MMC_TYPE_SD_COMBO)
325 max_dtr = min(max_dtr, mmc_sd_get_max_clock(card));
326
327 return max_dtr;
328}
329
330/*
331 * Handle the detection and initialisation of a card.
332 *
333 * In the case of a resume, "oldcard" will contain the card
334 * we're trying to reinitialise.
335 */
336static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
337 struct mmc_card *oldcard, int powered_resume)
338{
339 struct mmc_card *card;
340 int err;
341
342 BUG_ON(!host);
343 WARN_ON(!host->claimed);
344
345 /*
346 * Inform the card of the voltage
347 */
348 if (!powered_resume) {
349 err = mmc_send_io_op_cond(host, host->ocr, &ocr);
350 if (err)
351 goto err;
352 }
353
354 /*
355 * For SPI, enable CRC as appropriate.
356 */
357 if (mmc_host_is_spi(host)) {
358 err = mmc_spi_set_crc(host, use_spi_crc);
359 if (err)
360 goto err;
361 }
362
363 /*
364 * Allocate card structure.
365 */
366 card = mmc_alloc_card(host, NULL);
367 if (IS_ERR(card)) {
368 err = PTR_ERR(card);
369 goto err;
370 }
371
372 if ((ocr & R4_MEMORY_PRESENT) &&
373 mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid, NULL) == 0) {
374 card->type = MMC_TYPE_SD_COMBO;
375
376 if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
377 memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) {
378 mmc_remove_card(card);
379 return -ENOENT;
380 }
381 } else {
382 card->type = MMC_TYPE_SDIO;
383
384 if (oldcard && oldcard->type != MMC_TYPE_SDIO) {
385 mmc_remove_card(card);
386 return -ENOENT;
387 }
388 }
389
390 /*
391 * Call the optional HC's init_card function to handle quirks.
392 */
393 if (host->ops->init_card)
394 host->ops->init_card(host, card);
395
396 /*
397 * For native busses: set card RCA and quit open drain mode.
398 */
399 if (!powered_resume && !mmc_host_is_spi(host)) {
400 err = mmc_send_relative_addr(host, &card->rca);
401 if (err)
402 goto remove;
403
404 /*
405 * Update oldcard with the new RCA received from the SDIO
406 * device -- we're doing this so that it's updated in the
407 * "card" struct when oldcard overwrites that later.
408 */
409 if (oldcard)
410 oldcard->rca = card->rca;
411
412 mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
413 }
414
415 /*
416 * Read CSD, before selecting the card
417 */
418 if (!oldcard && card->type == MMC_TYPE_SD_COMBO) {
419 err = mmc_sd_get_csd(host, card);
420 if (err)
421 return err;
422
423 mmc_decode_cid(card);
424 }
425
426 /*
427 * Select card, as all following commands rely on that.
428 */
429 if (!powered_resume && !mmc_host_is_spi(host)) {
430 err = mmc_select_card(card);
431 if (err)
432 goto remove;
433 }
434
435 if (card->quirks & MMC_QUIRK_NONSTD_SDIO) {
436 /*
437 * This is non-standard SDIO device, meaning it doesn't
438 * have any CIA (Common I/O area) registers present.
439 * It's host's responsibility to fill cccr and cis
440 * structures in init_card().
441 */
442 mmc_set_clock(host, card->cis.max_dtr);
443
444 if (card->cccr.high_speed) {
445 mmc_card_set_highspeed(card);
446 mmc_set_timing(card->host, MMC_TIMING_SD_HS);
447 }
448
449 goto finish;
450 }
451
452 /*
453 * Read the common registers.
454 */
455 err = sdio_read_cccr(card);
456 if (err)
457 goto remove;
458
459 /*
460 * Read the common CIS tuples.
461 */
462 err = sdio_read_common_cis(card);
463 if (err)
464 goto remove;
465
466 if (oldcard) {
467 int same = (card->cis.vendor == oldcard->cis.vendor &&
468 card->cis.device == oldcard->cis.device);
469 mmc_remove_card(card);
470 if (!same)
471 return -ENOENT;
472
473 card = oldcard;
474 }
475 mmc_fixup_device(card, NULL);
476
477 if (card->type == MMC_TYPE_SD_COMBO) {
478 err = mmc_sd_setup_card(host, card, oldcard != NULL);
479 /* handle as SDIO-only card if memory init failed */
480 if (err) {
481 mmc_go_idle(host);
482 if (mmc_host_is_spi(host))
483 /* should not fail, as it worked previously */
484 mmc_spi_set_crc(host, use_spi_crc);
485 card->type = MMC_TYPE_SDIO;
486 } else
487 card->dev.type = &sd_type;
488 }
489
490 /*
491 * If needed, disconnect card detection pull-up resistor.
492 */
493 err = sdio_disable_cd(card);
494 if (err)
495 goto remove;
496
497 /*
498 * Switch to high-speed (if supported).
499 */
500 err = sdio_enable_hs(card);
501 if (err > 0)
502 mmc_sd_go_highspeed(card);
503 else if (err)
504 goto remove;
505
506 /*
507 * Change to the card's maximum speed.
508 */
509 mmc_set_clock(host, mmc_sdio_get_max_clock(card));
510
511 /*
512 * Switch to wider bus (if supported).
513 */
514 err = sdio_enable_4bit_bus(card);
515 if (err > 0)
516 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
517 else if (err)
518 goto remove;
519
520finish:
521 if (!oldcard)
522 host->card = card;
523 return 0;
524
525remove:
526 if (!oldcard)
527 mmc_remove_card(card);
528
529err:
530 return err;
531}
532
533/*
534 * Host is being removed. Free up the current card.
535 */
536static void mmc_sdio_remove(struct mmc_host *host)
537{
538 int i;
539
540 BUG_ON(!host);
541 BUG_ON(!host->card);
542
543 for (i = 0;i < host->card->sdio_funcs;i++) {
544 if (host->card->sdio_func[i]) {
545 sdio_remove_func(host->card->sdio_func[i]);
546 host->card->sdio_func[i] = NULL;
547 }
548 }
549
550 mmc_remove_card(host->card);
551 host->card = NULL;
552}
553
554/*
555 * Card detection callback from host.
556 */
557static void mmc_sdio_detect(struct mmc_host *host)
558{
559 int err;
560
561 BUG_ON(!host);
562 BUG_ON(!host->card);
563
564 /* Make sure card is powered before detecting it */
565 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
566 err = pm_runtime_get_sync(&host->card->dev);
567 if (err < 0)
568 goto out;
569 }
570
571 mmc_claim_host(host);
572
573 /*
574 * Just check if our card has been removed.
575 */
576 err = mmc_select_card(host->card);
577
578 mmc_release_host(host);
579
580 /*
581 * Tell PM core it's OK to power off the card now.
582 *
583 * The _sync variant is used in order to ensure that the card
584 * is left powered off in case an error occurred, and the card
585 * is going to be removed.
586 *
587 * Since there is no specific reason to believe a new user
588 * is about to show up at this point, the _sync variant is
589 * desirable anyway.
590 */
591 if (host->caps & MMC_CAP_POWER_OFF_CARD)
592 pm_runtime_put_sync(&host->card->dev);
593
594out:
595 if (err) {
596 mmc_sdio_remove(host);
597
598 mmc_claim_host(host);
599 mmc_detach_bus(host);
600 mmc_release_host(host);
601 }
602}
603
604/*
605 * SDIO suspend. We need to suspend all functions separately.
606 * Therefore all registered functions must have drivers with suspend
607 * and resume methods. Failing that we simply remove the whole card.
608 */
609static int mmc_sdio_suspend(struct mmc_host *host)
610{
611 int i, err = 0;
612
613 for (i = 0; i < host->card->sdio_funcs; i++) {
614 struct sdio_func *func = host->card->sdio_func[i];
615 if (func && sdio_func_present(func) && func->dev.driver) {
616 const struct dev_pm_ops *pmops = func->dev.driver->pm;
617 if (!pmops || !pmops->suspend || !pmops->resume) {
618 /* force removal of entire card in that case */
619 err = -ENOSYS;
620 } else
621 err = pmops->suspend(&func->dev);
622 if (err)
623 break;
624 }
625 }
626 while (err && --i >= 0) {
627 struct sdio_func *func = host->card->sdio_func[i];
628 if (func && sdio_func_present(func) && func->dev.driver) {
629 const struct dev_pm_ops *pmops = func->dev.driver->pm;
630 pmops->resume(&func->dev);
631 }
632 }
633
634 if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
635 mmc_claim_host(host);
636 sdio_disable_wide(host->card);
637 mmc_release_host(host);
638 }
639
640 return err;
641}
642
643static int mmc_sdio_resume(struct mmc_host *host)
644{
645 int i, err = 0;
646
647 BUG_ON(!host);
648 BUG_ON(!host->card);
649
650 /* Basic card reinitialization. */
651 mmc_claim_host(host);
652
653 /* No need to reinitialize powered-resumed nonremovable cards */
654 if (mmc_card_is_removable(host) || !mmc_card_keep_power(host))
655 err = mmc_sdio_init_card(host, host->ocr, host->card,
656 mmc_card_keep_power(host));
657 else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
658 /* We may have switched to 1-bit mode during suspend */
659 err = sdio_enable_4bit_bus(host->card);
660 if (err > 0) {
661 mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
662 err = 0;
663 }
664 }
665
666 if (!err && host->sdio_irqs)
667 mmc_signal_sdio_irq(host);
668 mmc_release_host(host);
669
670 /*
671 * If the card looked to be the same as before suspending, then
672 * we proceed to resume all card functions. If one of them returns
673 * an error then we simply return that error to the core and the
674 * card will be redetected as new. It is the responsibility of
675 * the function driver to perform further tests with the extra
676 * knowledge it has of the card to confirm the card is indeed the
677 * same as before suspending (same MAC address for network cards,
678 * etc.) and return an error otherwise.
679 */
680 for (i = 0; !err && i < host->card->sdio_funcs; i++) {
681 struct sdio_func *func = host->card->sdio_func[i];
682 if (func && sdio_func_present(func) && func->dev.driver) {
683 const struct dev_pm_ops *pmops = func->dev.driver->pm;
684 err = pmops->resume(&func->dev);
685 }
686 }
687
688 return err;
689}
690
691static int mmc_sdio_power_restore(struct mmc_host *host)
692{
693 int ret;
694 u32 ocr;
695
696 BUG_ON(!host);
697 BUG_ON(!host->card);
698
699 mmc_claim_host(host);
700
701 /*
702 * Reset the card by performing the same steps that are taken by
703 * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
704 *
705 * sdio_reset() is technically not needed. Having just powered up the
706 * hardware, it should already be in reset state. However, some
707 * platforms (such as SD8686 on OLPC) do not instantly cut power,
708 * meaning that a reset is required when restoring power soon after
709 * powering off. It is harmless in other cases.
710 *
711 * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
712 * is not necessary for non-removable cards. However, it is required
713 * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
714 * harmless in other situations.
715 *
716 * With these steps taken, mmc_select_voltage() is also required to
717 * restore the correct voltage setting of the card.
718 */
719 sdio_reset(host);
720 mmc_go_idle(host);
721 mmc_send_if_cond(host, host->ocr_avail);
722
723 ret = mmc_send_io_op_cond(host, 0, &ocr);
724 if (ret)
725 goto out;
726
727 if (host->ocr_avail_sdio)
728 host->ocr_avail = host->ocr_avail_sdio;
729
730 host->ocr = mmc_select_voltage(host, ocr & ~0x7F);
731 if (!host->ocr) {
732 ret = -EINVAL;
733 goto out;
734 }
735
736 ret = mmc_sdio_init_card(host, host->ocr, host->card,
737 mmc_card_keep_power(host));
738 if (!ret && host->sdio_irqs)
739 mmc_signal_sdio_irq(host);
740
741out:
742 mmc_release_host(host);
743
744 return ret;
745}
746
747static const struct mmc_bus_ops mmc_sdio_ops = {
748 .remove = mmc_sdio_remove,
749 .detect = mmc_sdio_detect,
750 .suspend = mmc_sdio_suspend,
751 .resume = mmc_sdio_resume,
752 .power_restore = mmc_sdio_power_restore,
753};
754
755
756/*
757 * Starting point for SDIO card init.
758 */
759int mmc_attach_sdio(struct mmc_host *host)
760{
761 int err, i, funcs;
762 u32 ocr;
763 struct mmc_card *card;
764
765 BUG_ON(!host);
766 WARN_ON(!host->claimed);
767
768 err = mmc_send_io_op_cond(host, 0, &ocr);
769 if (err)
770 return err;
771
772 mmc_attach_bus(host, &mmc_sdio_ops);
773 if (host->ocr_avail_sdio)
774 host->ocr_avail = host->ocr_avail_sdio;
775
776 /*
777 * Sanity check the voltages that the card claims to
778 * support.
779 */
780 if (ocr & 0x7F) {
781 printk(KERN_WARNING "%s: card claims to support voltages "
782 "below the defined range. These will be ignored.\n",
783 mmc_hostname(host));
784 ocr &= ~0x7F;
785 }
786
787 host->ocr = mmc_select_voltage(host, ocr);
788
789 /*
790 * Can we support the voltage(s) of the card(s)?
791 */
792 if (!host->ocr) {
793 err = -EINVAL;
794 goto err;
795 }
796
797 /*
798 * Detect and init the card.
799 */
800 err = mmc_sdio_init_card(host, host->ocr, NULL, 0);
801 if (err)
802 goto err;
803 card = host->card;
804
805 /*
806 * Enable runtime PM only if supported by host+card+board
807 */
808 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
809 /*
810 * Let runtime PM core know our card is active
811 */
812 err = pm_runtime_set_active(&card->dev);
813 if (err)
814 goto remove;
815
816 /*
817 * Enable runtime PM for this card
818 */
819 pm_runtime_enable(&card->dev);
820 }
821
822 /*
823 * The number of functions on the card is encoded inside
824 * the ocr.
825 */
826 funcs = (ocr & 0x70000000) >> 28;
827 card->sdio_funcs = 0;
828
829 /*
830 * Initialize (but don't add) all present functions.
831 */
832 for (i = 0; i < funcs; i++, card->sdio_funcs++) {
833 err = sdio_init_func(host->card, i + 1);
834 if (err)
835 goto remove;
836
837 /*
838 * Enable Runtime PM for this func (if supported)
839 */
840 if (host->caps & MMC_CAP_POWER_OFF_CARD)
841 pm_runtime_enable(&card->sdio_func[i]->dev);
842 }
843
844 /*
845 * First add the card to the driver model...
846 */
847 mmc_release_host(host);
848 err = mmc_add_card(host->card);
849 if (err)
850 goto remove_added;
851
852 /*
853 * ...then the SDIO functions.
854 */
855 for (i = 0;i < funcs;i++) {
856 err = sdio_add_func(host->card->sdio_func[i]);
857 if (err)
858 goto remove_added;
859 }
860
861 mmc_claim_host(host);
862 return 0;
863
864
865remove_added:
866 /* Remove without lock if the device has been added. */
867 mmc_sdio_remove(host);
868 mmc_claim_host(host);
869remove:
870 /* And with lock if it hasn't been added. */
871 mmc_release_host(host);
872 if (host->card)
873 mmc_sdio_remove(host);
874 mmc_claim_host(host);
875err:
876 mmc_detach_bus(host);
877
878 printk(KERN_ERR "%s: error %d whilst initialising SDIO card\n",
879 mmc_hostname(host), err);
880
881 return err;
882}
883