Linux Audio

Check our new training course

Yocto distribution development and maintenance

Need a Yocto distribution for your embedded project?
Loading...
v3.15
  1/*
  2 * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
  3 * series of PDAs
  4 *
  5 * Copyright (c) 2004-2005 Richard Purdie
  6 *
  7 * Based on code written by Sharp for 2.4 kernels
  8 *
  9 * This program is free software; you can redistribute it and/or modify
 10 * it under the terms of the GNU General Public License version 2 as
 11 * published by the Free Software Foundation.
 12 *
 13 */
 14
 15#undef DEBUG
 16
 17#include <linux/module.h>
 18#include <linux/kernel.h>
 19#include <linux/interrupt.h>
 20#include <linux/platform_device.h>
 21#include <linux/apm-emulation.h>
 22#include <linux/timer.h>
 23#include <linux/delay.h>
 24#include <linux/leds.h>
 25#include <linux/suspend.h>
 26#include <linux/gpio.h>
 27#include <linux/io.h>
 28
 29#include <asm/mach-types.h>
 30#include <mach/pm.h>
 31#include <mach/pxa2xx-regs.h>
 32#include <mach/regs-rtc.h>
 33#include <mach/sharpsl_pm.h>
 34
 35/*
 36 * Constants
 37 */
 38#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
 39#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
 40#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
 41#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
 42
 43#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
 44#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
 45#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
 46#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
 47#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
 48#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
 49#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
 50#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
 51
 52/*
 53 * Prototypes
 54 */
 55#ifdef CONFIG_PM
 56static int sharpsl_off_charge_battery(void);
 57static int sharpsl_check_battery_voltage(void);
 
 58#endif
 59static int sharpsl_check_battery_temp(void);
 60static int sharpsl_ac_check(void);
 61static int sharpsl_average_value(int ad);
 62static void sharpsl_average_clear(void);
 63static void sharpsl_charge_toggle(struct work_struct *private_);
 64static void sharpsl_battery_thread(struct work_struct *private_);
 65
 66
 67/*
 68 * Variables
 69 */
 70struct sharpsl_pm_status sharpsl_pm;
 71static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
 72static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
 73DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
 74
 75
 76
 77struct battery_thresh sharpsl_battery_levels_acin[] = {
 78	{ 213, 100},
 79	{ 212,  98},
 80	{ 211,  95},
 81	{ 210,  93},
 82	{ 209,  90},
 83	{ 208,  88},
 84	{ 207,  85},
 85	{ 206,  83},
 86	{ 205,  80},
 87	{ 204,  78},
 88	{ 203,  75},
 89	{ 202,  73},
 90	{ 201,  70},
 91	{ 200,  68},
 92	{ 199,  65},
 93	{ 198,  63},
 94	{ 197,  60},
 95	{ 196,  58},
 96	{ 195,  55},
 97	{ 194,  53},
 98	{ 193,  50},
 99	{ 192,  48},
100	{ 192,  45},
101	{ 191,  43},
102	{ 191,  40},
103	{ 190,  38},
104	{ 190,  35},
105	{ 189,  33},
106	{ 188,  30},
107	{ 187,  28},
108	{ 186,  25},
109	{ 185,  23},
110	{ 184,  20},
111	{ 183,  18},
112	{ 182,  15},
113	{ 181,  13},
114	{ 180,  10},
115	{ 179,   8},
116	{ 178,   5},
117	{   0,   0},
118};
119
120struct battery_thresh sharpsl_battery_levels_noac[] = {
121	{ 213, 100},
122	{ 212,  98},
123	{ 211,  95},
124	{ 210,  93},
125	{ 209,  90},
126	{ 208,  88},
127	{ 207,  85},
128	{ 206,  83},
129	{ 205,  80},
130	{ 204,  78},
131	{ 203,  75},
132	{ 202,  73},
133	{ 201,  70},
134	{ 200,  68},
135	{ 199,  65},
136	{ 198,  63},
137	{ 197,  60},
138	{ 196,  58},
139	{ 195,  55},
140	{ 194,  53},
141	{ 193,  50},
142	{ 192,  48},
143	{ 191,  45},
144	{ 190,  43},
145	{ 189,  40},
146	{ 188,  38},
147	{ 187,  35},
148	{ 186,  33},
149	{ 185,  30},
150	{ 184,  28},
151	{ 183,  25},
152	{ 182,  23},
153	{ 181,  20},
154	{ 180,  18},
155	{ 179,  15},
156	{ 178,  13},
157	{ 177,  10},
158	{ 176,   8},
159	{ 175,   5},
160	{   0,   0},
161};
162
163/* MAX1111 Commands */
164#define MAXCTRL_PD0      (1u << 0)
165#define MAXCTRL_PD1      (1u << 1)
166#define MAXCTRL_SGL      (1u << 2)
167#define MAXCTRL_UNI      (1u << 3)
168#define MAXCTRL_SEL_SH   4
169#define MAXCTRL_STR      (1u << 7)
170
171extern int max1111_read_channel(int);
172/*
173 * Read MAX1111 ADC
174 */
175int sharpsl_pm_pxa_read_max1111(int channel)
176{
177	/* Ugly, better move this function into another module */
178	if (machine_is_tosa())
179	    return 0;
180
 
 
181	/* max1111 accepts channels from 0-3, however,
182	 * it is encoded from 0-7 here in the code.
183	 */
184	return max1111_read_channel(channel >> 1);
185}
186
187static int get_percentage(int voltage)
188{
189	int i = sharpsl_pm.machinfo->bat_levels - 1;
190	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
191	struct battery_thresh *thresh;
192
193	if (sharpsl_pm.charge_mode == CHRG_ON)
194		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
195	else
196		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
197
198	while (i > 0 && (voltage > thresh[i].voltage))
199		i--;
200
201	return thresh[i].percentage;
202}
203
204static int get_apm_status(int voltage)
205{
206	int low_thresh, high_thresh;
207
208	if (sharpsl_pm.charge_mode == CHRG_ON) {
209		high_thresh = sharpsl_pm.machinfo->status_high_acin;
210		low_thresh = sharpsl_pm.machinfo->status_low_acin;
211	} else {
212		high_thresh = sharpsl_pm.machinfo->status_high_noac;
213		low_thresh = sharpsl_pm.machinfo->status_low_noac;
214	}
215
216	if (voltage >= high_thresh)
217		return APM_BATTERY_STATUS_HIGH;
218	if (voltage >= low_thresh)
219		return APM_BATTERY_STATUS_LOW;
220	return APM_BATTERY_STATUS_CRITICAL;
221}
222
223void sharpsl_battery_kick(void)
224{
225	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
226}
227EXPORT_SYMBOL(sharpsl_battery_kick);
228
229
230static void sharpsl_battery_thread(struct work_struct *private_)
231{
232	int voltage, percent, apm_status, i;
233
234	if (!sharpsl_pm.machinfo)
235		return;
236
237	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
238
239	/* Corgi cannot confirm when battery fully charged so periodically kick! */
240	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
241			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
242		schedule_delayed_work(&toggle_charger, 0);
243
244	for (i = 0; i < 5; i++) {
245		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
246		if (voltage > 0)
247			break;
248	}
249	if (voltage <= 0) {
250		voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
251		dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
252	}
253
254	voltage = sharpsl_average_value(voltage);
255	apm_status = get_apm_status(voltage);
256	percent = get_percentage(voltage);
257
258	/* At low battery voltages, the voltage has a tendency to start
259	   creeping back up so we try to avoid this here */
260	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
261	    || (apm_status == APM_BATTERY_STATUS_HIGH)
262	    || percent <= sharpsl_pm.battstat.mainbat_percent) {
263		sharpsl_pm.battstat.mainbat_voltage = voltage;
264		sharpsl_pm.battstat.mainbat_status = apm_status;
265		sharpsl_pm.battstat.mainbat_percent = percent;
266	}
267
268	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
269			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
270
271	/* Suspend if critical battery level */
272	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
273	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
274	     && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
275		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
276		dev_err(sharpsl_pm.dev, "Fatal Off\n");
277		apm_queue_event(APM_CRITICAL_SUSPEND);
278	}
279
280	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
281}
282
283void sharpsl_pm_led(int val)
284{
285	if (val == SHARPSL_LED_ERROR) {
286		dev_err(sharpsl_pm.dev, "Charging Error!\n");
287	} else if (val == SHARPSL_LED_ON) {
288		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
289		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
290	} else {
291		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
292		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
293	}
294}
295
296static void sharpsl_charge_on(void)
297{
298	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
299
300	sharpsl_pm.full_count = 0;
301	sharpsl_pm.charge_mode = CHRG_ON;
302	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
303	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
304}
305
306static void sharpsl_charge_off(void)
307{
308	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
309
310	sharpsl_pm.machinfo->charge(0);
311	sharpsl_pm_led(SHARPSL_LED_OFF);
312	sharpsl_pm.charge_mode = CHRG_OFF;
313
314	schedule_delayed_work(&sharpsl_bat, 0);
315}
316
317static void sharpsl_charge_error(void)
318{
319	sharpsl_pm_led(SHARPSL_LED_ERROR);
320	sharpsl_pm.machinfo->charge(0);
321	sharpsl_pm.charge_mode = CHRG_ERROR;
322}
323
324static void sharpsl_charge_toggle(struct work_struct *private_)
325{
326	dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
327
328	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
329		sharpsl_charge_off();
330		return;
331	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
332		sharpsl_charge_error();
333		return;
334	}
335
336	sharpsl_pm_led(SHARPSL_LED_ON);
337	sharpsl_pm.machinfo->charge(0);
338	mdelay(SHARPSL_CHARGE_WAIT_TIME);
339	sharpsl_pm.machinfo->charge(1);
340
341	sharpsl_pm.charge_start_time = jiffies;
342}
343
344static void sharpsl_ac_timer(unsigned long data)
345{
346	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
347
348	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
349
350	sharpsl_average_clear();
351	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
352		sharpsl_charge_on();
353	else if (sharpsl_pm.charge_mode == CHRG_ON)
354		sharpsl_charge_off();
355
356	schedule_delayed_work(&sharpsl_bat, 0);
357}
358
359
360static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
361{
362	/* Delay the event slightly to debounce */
363	/* Must be a smaller delay than the chrg_full_isr below */
364	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
365
366	return IRQ_HANDLED;
367}
368
369static void sharpsl_chrg_full_timer(unsigned long data)
370{
371	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
372
373	sharpsl_pm.full_count++;
374
375	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
376		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
377		if (sharpsl_pm.charge_mode == CHRG_ON)
378			sharpsl_charge_off();
379	} else if (sharpsl_pm.full_count < 2) {
380		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
381		schedule_delayed_work(&toggle_charger, 0);
382	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
383		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
384		schedule_delayed_work(&toggle_charger, 0);
385	} else {
386		sharpsl_charge_off();
387		sharpsl_pm.charge_mode = CHRG_DONE;
388		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
389	}
390}
391
392/* Charging Finished Interrupt (Not present on Corgi) */
393/* Can trigger at the same time as an AC status change so
394   delay until after that has been processed */
395static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
396{
397	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
398		return IRQ_HANDLED;
399
400	/* delay until after any ac interrupt */
401	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
402
403	return IRQ_HANDLED;
404}
405
406static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
407{
408	int is_fatal = 0;
409
410	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
411		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
412		is_fatal = 1;
413	}
414
415	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
416		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
417		is_fatal = 1;
418	}
419
420	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
421		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
422		apm_queue_event(APM_CRITICAL_SUSPEND);
423	}
424
425	return IRQ_HANDLED;
426}
427
428/*
429 * Maintain an average of the last 10 readings
430 */
431#define SHARPSL_CNV_VALUE_NUM    10
432static int sharpsl_ad_index;
433
434static void sharpsl_average_clear(void)
435{
436	sharpsl_ad_index = 0;
437}
438
439static int sharpsl_average_value(int ad)
440{
441	int i, ad_val = 0;
442	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
443
444	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
445		sharpsl_ad_index = 0;
446		return ad;
447	}
448
449	sharpsl_ad[sharpsl_ad_index] = ad;
450	sharpsl_ad_index++;
451	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
452		for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
453			sharpsl_ad[i] = sharpsl_ad[i+1];
454		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
455	}
456	for (i = 0; i < sharpsl_ad_index; i++)
457		ad_val += sharpsl_ad[i];
458
459	return ad_val / sharpsl_ad_index;
460}
461
462/*
463 * Take an array of 5 integers, remove the maximum and minimum values
464 * and return the average.
465 */
466static int get_select_val(int *val)
467{
468	int i, j, k, temp, sum = 0;
469
470	/* Find MAX val */
471	temp = val[0];
472	j = 0;
473	for (i = 1; i < 5; i++) {
474		if (temp < val[i]) {
475			temp = val[i];
476			j = i;
477		}
478	}
479
480	/* Find MIN val */
481	temp = val[4];
482	k = 4;
483	for (i = 3; i >= 0; i--) {
484		if (temp > val[i]) {
485			temp = val[i];
486			k = i;
487		}
488	}
489
490	for (i = 0; i < 5; i++)
491		if (i != j && i != k)
492			sum += val[i];
493
494	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
495
496	return sum/3;
497}
498
499static int sharpsl_check_battery_temp(void)
500{
501	int val, i, buff[5];
502
503	/* Check battery temperature */
504	for (i = 0; i < 5; i++) {
505		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
506		sharpsl_pm.machinfo->measure_temp(1);
507		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
508		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
509		sharpsl_pm.machinfo->measure_temp(0);
510	}
511
512	val = get_select_val(buff);
513
514	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
515	if (val > sharpsl_pm.machinfo->charge_on_temp) {
516		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
517		return -1;
518	}
519
520	return 0;
521}
522
523#ifdef CONFIG_PM
524static int sharpsl_check_battery_voltage(void)
525{
526	int val, i, buff[5];
527
528	/* disable charge, enable discharge */
529	sharpsl_pm.machinfo->charge(0);
530	sharpsl_pm.machinfo->discharge(1);
531	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
532
533	if (sharpsl_pm.machinfo->discharge1)
534		sharpsl_pm.machinfo->discharge1(1);
535
536	/* Check battery voltage */
537	for (i = 0; i < 5; i++) {
538		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
539		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
540	}
541
542	if (sharpsl_pm.machinfo->discharge1)
543		sharpsl_pm.machinfo->discharge1(0);
544
545	sharpsl_pm.machinfo->discharge(0);
546
547	val = get_select_val(buff);
548	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
549
550	if (val < sharpsl_pm.machinfo->charge_on_volt)
551		return -1;
552
553	return 0;
554}
555#endif
556
557static int sharpsl_ac_check(void)
558{
559	int temp, i, buff[5];
560
561	for (i = 0; i < 5; i++) {
562		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
563		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
564	}
565
566	temp = get_select_val(buff);
567	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
568
569	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
570		dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
571		return -1;
572	}
573
574	return 0;
575}
576
577#ifdef CONFIG_PM
578static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
579{
580	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
581	flush_delayed_work(&toggle_charger);
582	flush_delayed_work(&sharpsl_bat);
583
584	if (sharpsl_pm.charge_mode == CHRG_ON)
585		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
586	else
587		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
588
589	return 0;
590}
591
592static int sharpsl_pm_resume(struct platform_device *pdev)
593{
594	/* Clear the reset source indicators as they break the bootloader upon reboot */
595	RCSR = 0x0f;
596	sharpsl_average_clear();
597	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
598	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
599
600	return 0;
601}
602
603static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
604{
605	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
606
607	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
608	/* not charging and AC-IN! */
609
610	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
611		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
612		sharpsl_pm.charge_mode = CHRG_OFF;
613		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
614		sharpsl_off_charge_battery();
615	}
616
617	sharpsl_pm.machinfo->presuspend();
618
619	PEDR = 0xffffffff; /* clear it */
620
621	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
622	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
623		RTSR &= RTSR_ALE;
624		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
625		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
626		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
627	} else if (alarm_enable) {
628		RTSR &= RTSR_ALE;
629		RTAR = alarm_time;
630		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
631	} else {
632		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
633	}
634
635	pxa_pm_enter(state);
636
637	sharpsl_pm.machinfo->postsuspend();
638
639	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
640}
641
642static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
643{
644	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
645		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
646			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
647			corgi_goto_sleep(alarm_time, alarm_enable, state);
648			return 1;
649		}
650		if (sharpsl_off_charge_battery()) {
651			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
652			corgi_goto_sleep(alarm_time, alarm_enable, state);
653			return 1;
654		}
655		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
656	}
657
658	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
659	    (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)))	{
660		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
661		corgi_goto_sleep(alarm_time, alarm_enable, state);
662		return 1;
663	}
664
665	return 0;
666}
667
668static int corgi_pxa_pm_enter(suspend_state_t state)
669{
670	unsigned long alarm_time = RTAR;
671	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
672
673	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
674
675	corgi_goto_sleep(alarm_time, alarm_status, state);
676
677	while (corgi_enter_suspend(alarm_time, alarm_status, state))
678		{}
679
680	if (sharpsl_pm.machinfo->earlyresume)
681		sharpsl_pm.machinfo->earlyresume();
682
683	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
684
685	return 0;
686}
687
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
688static int sharpsl_off_charge_error(void)
689{
690	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
691	sharpsl_pm.machinfo->charge(0);
692	sharpsl_pm_led(SHARPSL_LED_ERROR);
693	sharpsl_pm.charge_mode = CHRG_ERROR;
694	return 1;
695}
696
697/*
698 * Charging Control while suspended
699 * Return 1 - go straight to sleep
700 * Return 0 - sleep or wakeup depending on other factors
701 */
702static int sharpsl_off_charge_battery(void)
703{
704	int time;
705
706	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
707
708	if (sharpsl_pm.charge_mode == CHRG_OFF) {
709		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
710
711		/* AC Check */
712		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
713			return sharpsl_off_charge_error();
714
715		/* Start Charging */
716		sharpsl_pm_led(SHARPSL_LED_ON);
717		sharpsl_pm.machinfo->charge(0);
718		mdelay(SHARPSL_CHARGE_WAIT_TIME);
719		sharpsl_pm.machinfo->charge(1);
720
721		sharpsl_pm.charge_mode = CHRG_ON;
722		sharpsl_pm.full_count = 0;
723
724		return 1;
725	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
726		return 1;
727	}
728
729	if (sharpsl_pm.full_count == 0) {
730		int time;
731
732		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
733
734		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
735			return sharpsl_off_charge_error();
736
737		sharpsl_pm.machinfo->charge(0);
738		mdelay(SHARPSL_CHARGE_WAIT_TIME);
739		sharpsl_pm.machinfo->charge(1);
740		sharpsl_pm.charge_mode = CHRG_ON;
741
742		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
743
744		time = RCNR;
745		while (1) {
746			/* Check if any wakeup event had occurred */
747			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
748				return 0;
749			/* Check for timeout */
750			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
751				return 1;
752			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
753				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
754				sharpsl_pm.full_count++;
755				sharpsl_pm.machinfo->charge(0);
756				mdelay(SHARPSL_CHARGE_WAIT_TIME);
757				sharpsl_pm.machinfo->charge(1);
758				return 1;
759			}
760		}
761	}
762
763	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
764
765	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
766
767	time = RCNR;
768	while (1) {
769		/* Check if any wakeup event had occurred */
770		if (sharpsl_pm.machinfo->charger_wakeup())
771			return 0;
772		/* Check for timeout */
773		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
774			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
775				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
776				sharpsl_pm.full_count = 0;
777			}
778			sharpsl_pm.full_count++;
779			return 1;
780		}
781		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
782			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
783			sharpsl_pm_led(SHARPSL_LED_OFF);
784			sharpsl_pm.machinfo->charge(0);
785			sharpsl_pm.charge_mode = CHRG_DONE;
786			return 1;
787		}
788	}
789}
790#else
791#define sharpsl_pm_suspend	NULL
792#define sharpsl_pm_resume	NULL
793#endif
794
795static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
796{
797	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
798}
799
800static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
801{
802	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
803}
804
805static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
806static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
807
808extern void (*apm_get_power_status)(struct apm_power_info *);
809
810static void sharpsl_apm_get_power_status(struct apm_power_info *info)
811{
812	info->ac_line_status = sharpsl_pm.battstat.ac_status;
813
814	if (sharpsl_pm.charge_mode == CHRG_ON)
815		info->battery_status = APM_BATTERY_STATUS_CHARGING;
816	else
817		info->battery_status = sharpsl_pm.battstat.mainbat_status;
818
819	info->battery_flag = (1 << info->battery_status);
820	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
821}
822
823#ifdef CONFIG_PM
824static const struct platform_suspend_ops sharpsl_pm_ops = {
825	.prepare	= pxa_pm_prepare,
826	.finish		= pxa_pm_finish,
827	.enter		= corgi_pxa_pm_enter,
828	.valid		= suspend_valid_only_mem,
829};
830#endif
831
832static int sharpsl_pm_probe(struct platform_device *pdev)
833{
834	int ret, irq;
835
836	if (!pdev->dev.platform_data)
837		return -EINVAL;
838
839	sharpsl_pm.dev = &pdev->dev;
840	sharpsl_pm.machinfo = pdev->dev.platform_data;
841	sharpsl_pm.charge_mode = CHRG_OFF;
842	sharpsl_pm.flags = 0;
843
844	init_timer(&sharpsl_pm.ac_timer);
845	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
846
847	init_timer(&sharpsl_pm.chrg_full_timer);
848	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
849
850	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
851
852	sharpsl_pm.machinfo->init();
853
854	gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
855	gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
856	gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
857	gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
858	gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
859	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
860
861	/* Register interrupt handlers */
862	irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_acin);
863	if (request_irq(irq, sharpsl_ac_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
864		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
865	}
866
867	irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock);
868	if (request_irq(irq, sharpsl_fatal_isr, IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
869		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
870	}
871
872	if (sharpsl_pm.machinfo->gpio_fatal) {
873		irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal);
874		if (request_irq(irq, sharpsl_fatal_isr, IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
875			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
876		}
877	}
878
879	if (sharpsl_pm.machinfo->batfull_irq) {
880		/* Register interrupt handler. */
881		irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull);
882		if (request_irq(irq, sharpsl_chrg_full_isr, IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
883			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
884		}
885	}
886
887	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
888	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
889	if (ret != 0)
890		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
891
892	apm_get_power_status = sharpsl_apm_get_power_status;
893
894#ifdef CONFIG_PM
895	suspend_set_ops(&sharpsl_pm_ops);
896#endif
897
898	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
899
900	return 0;
901}
902
903static int sharpsl_pm_remove(struct platform_device *pdev)
904{
905	suspend_set_ops(NULL);
906
907	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
908	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
909
910	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
911
912	free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
913	free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
914
915	if (sharpsl_pm.machinfo->gpio_fatal)
916		free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
917
918	if (sharpsl_pm.machinfo->batfull_irq)
919		free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
920
921	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
922	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
923	gpio_free(sharpsl_pm.machinfo->gpio_acin);
924
925	if (sharpsl_pm.machinfo->exit)
926		sharpsl_pm.machinfo->exit();
927
928	del_timer_sync(&sharpsl_pm.chrg_full_timer);
929	del_timer_sync(&sharpsl_pm.ac_timer);
930
931	return 0;
932}
933
934static struct platform_driver sharpsl_pm_driver = {
935	.probe		= sharpsl_pm_probe,
936	.remove		= sharpsl_pm_remove,
937	.suspend	= sharpsl_pm_suspend,
938	.resume		= sharpsl_pm_resume,
939	.driver		= {
940		.name		= "sharpsl-pm",
941	},
942};
943
944static int sharpsl_pm_init(void)
945{
946	return platform_driver_register(&sharpsl_pm_driver);
947}
948
949static void sharpsl_pm_exit(void)
950{
951	platform_driver_unregister(&sharpsl_pm_driver);
952}
953
954late_initcall(sharpsl_pm_init);
955module_exit(sharpsl_pm_exit);
v3.1
  1/*
  2 * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
  3 * series of PDAs
  4 *
  5 * Copyright (c) 2004-2005 Richard Purdie
  6 *
  7 * Based on code written by Sharp for 2.4 kernels
  8 *
  9 * This program is free software; you can redistribute it and/or modify
 10 * it under the terms of the GNU General Public License version 2 as
 11 * published by the Free Software Foundation.
 12 *
 13 */
 14
 15#undef DEBUG
 16
 17#include <linux/module.h>
 18#include <linux/kernel.h>
 19#include <linux/interrupt.h>
 20#include <linux/platform_device.h>
 21#include <linux/apm-emulation.h>
 22#include <linux/timer.h>
 23#include <linux/delay.h>
 24#include <linux/leds.h>
 25#include <linux/suspend.h>
 26#include <linux/gpio.h>
 
 27
 28#include <asm/mach-types.h>
 29#include <mach/pm.h>
 30#include <mach/pxa2xx-regs.h>
 31#include <mach/regs-rtc.h>
 32#include <mach/sharpsl_pm.h>
 33
 34/*
 35 * Constants
 36 */
 37#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
 38#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
 39#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
 40#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
 41
 42#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
 43#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
 44#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
 45#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
 46#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
 47#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
 48#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
 49#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
 50
 51/*
 52 * Prototypes
 53 */
 54#ifdef CONFIG_PM
 55static int sharpsl_off_charge_battery(void);
 56static int sharpsl_check_battery_voltage(void);
 57static int sharpsl_fatal_check(void);
 58#endif
 59static int sharpsl_check_battery_temp(void);
 60static int sharpsl_ac_check(void);
 61static int sharpsl_average_value(int ad);
 62static void sharpsl_average_clear(void);
 63static void sharpsl_charge_toggle(struct work_struct *private_);
 64static void sharpsl_battery_thread(struct work_struct *private_);
 65
 66
 67/*
 68 * Variables
 69 */
 70struct sharpsl_pm_status sharpsl_pm;
 71static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
 72static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
 73DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
 74
 75
 76
 77struct battery_thresh sharpsl_battery_levels_acin[] = {
 78	{ 213, 100},
 79	{ 212,  98},
 80	{ 211,  95},
 81	{ 210,  93},
 82	{ 209,  90},
 83	{ 208,  88},
 84	{ 207,  85},
 85	{ 206,  83},
 86	{ 205,  80},
 87	{ 204,  78},
 88	{ 203,  75},
 89	{ 202,  73},
 90	{ 201,  70},
 91	{ 200,  68},
 92	{ 199,  65},
 93	{ 198,  63},
 94	{ 197,  60},
 95	{ 196,  58},
 96	{ 195,  55},
 97	{ 194,  53},
 98	{ 193,  50},
 99	{ 192,  48},
100	{ 192,  45},
101	{ 191,  43},
102	{ 191,  40},
103	{ 190,  38},
104	{ 190,  35},
105	{ 189,  33},
106	{ 188,  30},
107	{ 187,  28},
108	{ 186,  25},
109	{ 185,  23},
110	{ 184,  20},
111	{ 183,  18},
112	{ 182,  15},
113	{ 181,  13},
114	{ 180,  10},
115	{ 179,   8},
116	{ 178,   5},
117	{   0,   0},
118};
119
120struct battery_thresh sharpsl_battery_levels_noac[] = {
121	{ 213, 100},
122	{ 212,  98},
123	{ 211,  95},
124	{ 210,  93},
125	{ 209,  90},
126	{ 208,  88},
127	{ 207,  85},
128	{ 206,  83},
129	{ 205,  80},
130	{ 204,  78},
131	{ 203,  75},
132	{ 202,  73},
133	{ 201,  70},
134	{ 200,  68},
135	{ 199,  65},
136	{ 198,  63},
137	{ 197,  60},
138	{ 196,  58},
139	{ 195,  55},
140	{ 194,  53},
141	{ 193,  50},
142	{ 192,  48},
143	{ 191,  45},
144	{ 190,  43},
145	{ 189,  40},
146	{ 188,  38},
147	{ 187,  35},
148	{ 186,  33},
149	{ 185,  30},
150	{ 184,  28},
151	{ 183,  25},
152	{ 182,  23},
153	{ 181,  20},
154	{ 180,  18},
155	{ 179,  15},
156	{ 178,  13},
157	{ 177,  10},
158	{ 176,   8},
159	{ 175,   5},
160	{   0,   0},
161};
162
163/* MAX1111 Commands */
164#define MAXCTRL_PD0      (1u << 0)
165#define MAXCTRL_PD1      (1u << 1)
166#define MAXCTRL_SGL      (1u << 2)
167#define MAXCTRL_UNI      (1u << 3)
168#define MAXCTRL_SEL_SH   4
169#define MAXCTRL_STR      (1u << 7)
170
 
171/*
172 * Read MAX1111 ADC
173 */
174int sharpsl_pm_pxa_read_max1111(int channel)
175{
176	/* Ugly, better move this function into another module */
177	if (machine_is_tosa())
178	    return 0;
179
180	extern int max1111_read_channel(int);
181
182	/* max1111 accepts channels from 0-3, however,
183	 * it is encoded from 0-7 here in the code.
184	 */
185	return max1111_read_channel(channel >> 1);
186}
187
188static int get_percentage(int voltage)
189{
190	int i = sharpsl_pm.machinfo->bat_levels - 1;
191	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
192	struct battery_thresh *thresh;
193
194	if (sharpsl_pm.charge_mode == CHRG_ON)
195		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
196	else
197		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
198
199	while (i > 0 && (voltage > thresh[i].voltage))
200		i--;
201
202	return thresh[i].percentage;
203}
204
205static int get_apm_status(int voltage)
206{
207	int low_thresh, high_thresh;
208
209	if (sharpsl_pm.charge_mode == CHRG_ON) {
210		high_thresh = sharpsl_pm.machinfo->status_high_acin;
211		low_thresh = sharpsl_pm.machinfo->status_low_acin;
212	} else {
213		high_thresh = sharpsl_pm.machinfo->status_high_noac;
214		low_thresh = sharpsl_pm.machinfo->status_low_noac;
215	}
216
217	if (voltage >= high_thresh)
218		return APM_BATTERY_STATUS_HIGH;
219	if (voltage >= low_thresh)
220		return APM_BATTERY_STATUS_LOW;
221	return APM_BATTERY_STATUS_CRITICAL;
222}
223
224void sharpsl_battery_kick(void)
225{
226	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
227}
228EXPORT_SYMBOL(sharpsl_battery_kick);
229
230
231static void sharpsl_battery_thread(struct work_struct *private_)
232{
233	int voltage, percent, apm_status, i;
234
235	if (!sharpsl_pm.machinfo)
236		return;
237
238	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
239
240	/* Corgi cannot confirm when battery fully charged so periodically kick! */
241	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
242			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
243		schedule_delayed_work(&toggle_charger, 0);
244
245	for (i = 0; i < 5; i++) {
246		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
247		if (voltage > 0)
248			break;
249	}
250	if (voltage <= 0) {
251		voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
252		dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
253	}
254
255	voltage = sharpsl_average_value(voltage);
256	apm_status = get_apm_status(voltage);
257	percent = get_percentage(voltage);
258
259	/* At low battery voltages, the voltage has a tendency to start
260	   creeping back up so we try to avoid this here */
261	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
262	    || (apm_status == APM_BATTERY_STATUS_HIGH)
263	    || percent <= sharpsl_pm.battstat.mainbat_percent) {
264		sharpsl_pm.battstat.mainbat_voltage = voltage;
265		sharpsl_pm.battstat.mainbat_status = apm_status;
266		sharpsl_pm.battstat.mainbat_percent = percent;
267	}
268
269	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
270			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
271
272	/* Suspend if critical battery level */
273	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
274	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
275	     && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
276		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
277		dev_err(sharpsl_pm.dev, "Fatal Off\n");
278		apm_queue_event(APM_CRITICAL_SUSPEND);
279	}
280
281	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
282}
283
284void sharpsl_pm_led(int val)
285{
286	if (val == SHARPSL_LED_ERROR) {
287		dev_err(sharpsl_pm.dev, "Charging Error!\n");
288	} else if (val == SHARPSL_LED_ON) {
289		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
290		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
291	} else {
292		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
293		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
294	}
295}
296
297static void sharpsl_charge_on(void)
298{
299	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
300
301	sharpsl_pm.full_count = 0;
302	sharpsl_pm.charge_mode = CHRG_ON;
303	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
304	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
305}
306
307static void sharpsl_charge_off(void)
308{
309	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
310
311	sharpsl_pm.machinfo->charge(0);
312	sharpsl_pm_led(SHARPSL_LED_OFF);
313	sharpsl_pm.charge_mode = CHRG_OFF;
314
315	schedule_delayed_work(&sharpsl_bat, 0);
316}
317
318static void sharpsl_charge_error(void)
319{
320	sharpsl_pm_led(SHARPSL_LED_ERROR);
321	sharpsl_pm.machinfo->charge(0);
322	sharpsl_pm.charge_mode = CHRG_ERROR;
323}
324
325static void sharpsl_charge_toggle(struct work_struct *private_)
326{
327	dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
328
329	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
330		sharpsl_charge_off();
331		return;
332	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
333		sharpsl_charge_error();
334		return;
335	}
336
337	sharpsl_pm_led(SHARPSL_LED_ON);
338	sharpsl_pm.machinfo->charge(0);
339	mdelay(SHARPSL_CHARGE_WAIT_TIME);
340	sharpsl_pm.machinfo->charge(1);
341
342	sharpsl_pm.charge_start_time = jiffies;
343}
344
345static void sharpsl_ac_timer(unsigned long data)
346{
347	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
348
349	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
350
351	sharpsl_average_clear();
352	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
353		sharpsl_charge_on();
354	else if (sharpsl_pm.charge_mode == CHRG_ON)
355		sharpsl_charge_off();
356
357	schedule_delayed_work(&sharpsl_bat, 0);
358}
359
360
361static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
362{
363	/* Delay the event slightly to debounce */
364	/* Must be a smaller delay than the chrg_full_isr below */
365	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
366
367	return IRQ_HANDLED;
368}
369
370static void sharpsl_chrg_full_timer(unsigned long data)
371{
372	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
373
374	sharpsl_pm.full_count++;
375
376	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
377		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
378		if (sharpsl_pm.charge_mode == CHRG_ON)
379			sharpsl_charge_off();
380	} else if (sharpsl_pm.full_count < 2) {
381		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
382		schedule_delayed_work(&toggle_charger, 0);
383	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
384		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
385		schedule_delayed_work(&toggle_charger, 0);
386	} else {
387		sharpsl_charge_off();
388		sharpsl_pm.charge_mode = CHRG_DONE;
389		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
390	}
391}
392
393/* Charging Finished Interrupt (Not present on Corgi) */
394/* Can trigger at the same time as an AC status change so
395   delay until after that has been processed */
396static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
397{
398	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
399		return IRQ_HANDLED;
400
401	/* delay until after any ac interrupt */
402	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
403
404	return IRQ_HANDLED;
405}
406
407static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
408{
409	int is_fatal = 0;
410
411	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
412		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
413		is_fatal = 1;
414	}
415
416	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
417		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
418		is_fatal = 1;
419	}
420
421	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
422		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
423		apm_queue_event(APM_CRITICAL_SUSPEND);
424	}
425
426	return IRQ_HANDLED;
427}
428
429/*
430 * Maintain an average of the last 10 readings
431 */
432#define SHARPSL_CNV_VALUE_NUM    10
433static int sharpsl_ad_index;
434
435static void sharpsl_average_clear(void)
436{
437	sharpsl_ad_index = 0;
438}
439
440static int sharpsl_average_value(int ad)
441{
442	int i, ad_val = 0;
443	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
444
445	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
446		sharpsl_ad_index = 0;
447		return ad;
448	}
449
450	sharpsl_ad[sharpsl_ad_index] = ad;
451	sharpsl_ad_index++;
452	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
453		for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
454			sharpsl_ad[i] = sharpsl_ad[i+1];
455		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
456	}
457	for (i = 0; i < sharpsl_ad_index; i++)
458		ad_val += sharpsl_ad[i];
459
460	return ad_val / sharpsl_ad_index;
461}
462
463/*
464 * Take an array of 5 integers, remove the maximum and minimum values
465 * and return the average.
466 */
467static int get_select_val(int *val)
468{
469	int i, j, k, temp, sum = 0;
470
471	/* Find MAX val */
472	temp = val[0];
473	j = 0;
474	for (i = 1; i < 5; i++) {
475		if (temp < val[i]) {
476			temp = val[i];
477			j = i;
478		}
479	}
480
481	/* Find MIN val */
482	temp = val[4];
483	k = 4;
484	for (i = 3; i >= 0; i--) {
485		if (temp > val[i]) {
486			temp = val[i];
487			k = i;
488		}
489	}
490
491	for (i = 0; i < 5; i++)
492		if (i != j && i != k)
493			sum += val[i];
494
495	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
496
497	return sum/3;
498}
499
500static int sharpsl_check_battery_temp(void)
501{
502	int val, i, buff[5];
503
504	/* Check battery temperature */
505	for (i = 0; i < 5; i++) {
506		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
507		sharpsl_pm.machinfo->measure_temp(1);
508		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
509		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
510		sharpsl_pm.machinfo->measure_temp(0);
511	}
512
513	val = get_select_val(buff);
514
515	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
516	if (val > sharpsl_pm.machinfo->charge_on_temp) {
517		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
518		return -1;
519	}
520
521	return 0;
522}
523
524#ifdef CONFIG_PM
525static int sharpsl_check_battery_voltage(void)
526{
527	int val, i, buff[5];
528
529	/* disable charge, enable discharge */
530	sharpsl_pm.machinfo->charge(0);
531	sharpsl_pm.machinfo->discharge(1);
532	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
533
534	if (sharpsl_pm.machinfo->discharge1)
535		sharpsl_pm.machinfo->discharge1(1);
536
537	/* Check battery voltage */
538	for (i = 0; i < 5; i++) {
539		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
540		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
541	}
542
543	if (sharpsl_pm.machinfo->discharge1)
544		sharpsl_pm.machinfo->discharge1(0);
545
546	sharpsl_pm.machinfo->discharge(0);
547
548	val = get_select_val(buff);
549	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
550
551	if (val < sharpsl_pm.machinfo->charge_on_volt)
552		return -1;
553
554	return 0;
555}
556#endif
557
558static int sharpsl_ac_check(void)
559{
560	int temp, i, buff[5];
561
562	for (i = 0; i < 5; i++) {
563		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
564		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
565	}
566
567	temp = get_select_val(buff);
568	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
569
570	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
571		dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
572		return -1;
573	}
574
575	return 0;
576}
577
578#ifdef CONFIG_PM
579static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
580{
581	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
582	flush_delayed_work_sync(&toggle_charger);
583	flush_delayed_work_sync(&sharpsl_bat);
584
585	if (sharpsl_pm.charge_mode == CHRG_ON)
586		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
587	else
588		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
589
590	return 0;
591}
592
593static int sharpsl_pm_resume(struct platform_device *pdev)
594{
595	/* Clear the reset source indicators as they break the bootloader upon reboot */
596	RCSR = 0x0f;
597	sharpsl_average_clear();
598	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
599	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
600
601	return 0;
602}
603
604static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
605{
606	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
607
608	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
609	/* not charging and AC-IN! */
610
611	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
612		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
613		sharpsl_pm.charge_mode = CHRG_OFF;
614		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
615		sharpsl_off_charge_battery();
616	}
617
618	sharpsl_pm.machinfo->presuspend();
619
620	PEDR = 0xffffffff; /* clear it */
621
622	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
623	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
624		RTSR &= RTSR_ALE;
625		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
626		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
627		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
628	} else if (alarm_enable) {
629		RTSR &= RTSR_ALE;
630		RTAR = alarm_time;
631		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
632	} else {
633		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
634	}
635
636	pxa_pm_enter(state);
637
638	sharpsl_pm.machinfo->postsuspend();
639
640	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
641}
642
643static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
644{
645	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
646		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
647			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
648			corgi_goto_sleep(alarm_time, alarm_enable, state);
649			return 1;
650		}
651		if (sharpsl_off_charge_battery()) {
652			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
653			corgi_goto_sleep(alarm_time, alarm_enable, state);
654			return 1;
655		}
656		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
657	}
658
659	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
660	    (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)))	{
661		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
662		corgi_goto_sleep(alarm_time, alarm_enable, state);
663		return 1;
664	}
665
666	return 0;
667}
668
669static int corgi_pxa_pm_enter(suspend_state_t state)
670{
671	unsigned long alarm_time = RTAR;
672	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
673
674	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
675
676	corgi_goto_sleep(alarm_time, alarm_status, state);
677
678	while (corgi_enter_suspend(alarm_time, alarm_status, state))
679		{}
680
681	if (sharpsl_pm.machinfo->earlyresume)
682		sharpsl_pm.machinfo->earlyresume();
683
684	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
685
686	return 0;
687}
688
689/*
690 * Check for fatal battery errors
691 * Fatal returns -1
692 */
693static int sharpsl_fatal_check(void)
694{
695	int buff[5], temp, i, acin;
696
697	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
698
699	/* Check AC-Adapter */
700	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
701
702	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
703		sharpsl_pm.machinfo->charge(0);
704		udelay(100);
705		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
706		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
707	}
708
709	if (sharpsl_pm.machinfo->discharge1)
710		sharpsl_pm.machinfo->discharge1(1);
711
712	/* Check battery : check inserting battery ? */
713	for (i = 0; i < 5; i++) {
714		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
715		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
716	}
717
718	if (sharpsl_pm.machinfo->discharge1)
719		sharpsl_pm.machinfo->discharge1(0);
720
721	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
722		udelay(100);
723		sharpsl_pm.machinfo->charge(1);
724		sharpsl_pm.machinfo->discharge(0);
725	}
726
727	temp = get_select_val(buff);
728	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
729
730	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
731			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
732		return -1;
733	return 0;
734}
735
736static int sharpsl_off_charge_error(void)
737{
738	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
739	sharpsl_pm.machinfo->charge(0);
740	sharpsl_pm_led(SHARPSL_LED_ERROR);
741	sharpsl_pm.charge_mode = CHRG_ERROR;
742	return 1;
743}
744
745/*
746 * Charging Control while suspended
747 * Return 1 - go straight to sleep
748 * Return 0 - sleep or wakeup depending on other factors
749 */
750static int sharpsl_off_charge_battery(void)
751{
752	int time;
753
754	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
755
756	if (sharpsl_pm.charge_mode == CHRG_OFF) {
757		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
758
759		/* AC Check */
760		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
761			return sharpsl_off_charge_error();
762
763		/* Start Charging */
764		sharpsl_pm_led(SHARPSL_LED_ON);
765		sharpsl_pm.machinfo->charge(0);
766		mdelay(SHARPSL_CHARGE_WAIT_TIME);
767		sharpsl_pm.machinfo->charge(1);
768
769		sharpsl_pm.charge_mode = CHRG_ON;
770		sharpsl_pm.full_count = 0;
771
772		return 1;
773	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
774		return 1;
775	}
776
777	if (sharpsl_pm.full_count == 0) {
778		int time;
779
780		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
781
782		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
783			return sharpsl_off_charge_error();
784
785		sharpsl_pm.machinfo->charge(0);
786		mdelay(SHARPSL_CHARGE_WAIT_TIME);
787		sharpsl_pm.machinfo->charge(1);
788		sharpsl_pm.charge_mode = CHRG_ON;
789
790		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
791
792		time = RCNR;
793		while (1) {
794			/* Check if any wakeup event had occurred */
795			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
796				return 0;
797			/* Check for timeout */
798			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
799				return 1;
800			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
801				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
802				sharpsl_pm.full_count++;
803				sharpsl_pm.machinfo->charge(0);
804				mdelay(SHARPSL_CHARGE_WAIT_TIME);
805				sharpsl_pm.machinfo->charge(1);
806				return 1;
807			}
808		}
809	}
810
811	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
812
813	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
814
815	time = RCNR;
816	while (1) {
817		/* Check if any wakeup event had occurred */
818		if (sharpsl_pm.machinfo->charger_wakeup())
819			return 0;
820		/* Check for timeout */
821		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
822			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
823				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
824				sharpsl_pm.full_count = 0;
825			}
826			sharpsl_pm.full_count++;
827			return 1;
828		}
829		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
830			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
831			sharpsl_pm_led(SHARPSL_LED_OFF);
832			sharpsl_pm.machinfo->charge(0);
833			sharpsl_pm.charge_mode = CHRG_DONE;
834			return 1;
835		}
836	}
837}
838#else
839#define sharpsl_pm_suspend	NULL
840#define sharpsl_pm_resume	NULL
841#endif
842
843static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
844{
845	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
846}
847
848static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
849{
850	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
851}
852
853static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
854static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
855
856extern void (*apm_get_power_status)(struct apm_power_info *);
857
858static void sharpsl_apm_get_power_status(struct apm_power_info *info)
859{
860	info->ac_line_status = sharpsl_pm.battstat.ac_status;
861
862	if (sharpsl_pm.charge_mode == CHRG_ON)
863		info->battery_status = APM_BATTERY_STATUS_CHARGING;
864	else
865		info->battery_status = sharpsl_pm.battstat.mainbat_status;
866
867	info->battery_flag = (1 << info->battery_status);
868	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
869}
870
871#ifdef CONFIG_PM
872static const struct platform_suspend_ops sharpsl_pm_ops = {
873	.prepare	= pxa_pm_prepare,
874	.finish		= pxa_pm_finish,
875	.enter		= corgi_pxa_pm_enter,
876	.valid		= suspend_valid_only_mem,
877};
878#endif
879
880static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
881{
882	int ret;
883
884	if (!pdev->dev.platform_data)
885		return -EINVAL;
886
887	sharpsl_pm.dev = &pdev->dev;
888	sharpsl_pm.machinfo = pdev->dev.platform_data;
889	sharpsl_pm.charge_mode = CHRG_OFF;
890	sharpsl_pm.flags = 0;
891
892	init_timer(&sharpsl_pm.ac_timer);
893	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
894
895	init_timer(&sharpsl_pm.chrg_full_timer);
896	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
897
898	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
899
900	sharpsl_pm.machinfo->init();
901
902	gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
903	gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
904	gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
905	gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
906	gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
907	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
908
909	/* Register interrupt handlers */
910	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
911		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 
912	}
913
914	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
915		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 
916	}
917
918	if (sharpsl_pm.machinfo->gpio_fatal) {
919		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
920			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 
921		}
922	}
923
924	if (sharpsl_pm.machinfo->batfull_irq) {
925		/* Register interrupt handler. */
926		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
927			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 
928		}
929	}
930
931	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
932	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
933	if (ret != 0)
934		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
935
936	apm_get_power_status = sharpsl_apm_get_power_status;
937
938#ifdef CONFIG_PM
939	suspend_set_ops(&sharpsl_pm_ops);
940#endif
941
942	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
943
944	return 0;
945}
946
947static int sharpsl_pm_remove(struct platform_device *pdev)
948{
949	suspend_set_ops(NULL);
950
951	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
952	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
953
954	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
955
956	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
957	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
958
959	if (sharpsl_pm.machinfo->gpio_fatal)
960		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
961
962	if (sharpsl_pm.machinfo->batfull_irq)
963		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
964
965	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
966	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
967	gpio_free(sharpsl_pm.machinfo->gpio_acin);
968
969	if (sharpsl_pm.machinfo->exit)
970		sharpsl_pm.machinfo->exit();
971
972	del_timer_sync(&sharpsl_pm.chrg_full_timer);
973	del_timer_sync(&sharpsl_pm.ac_timer);
974
975	return 0;
976}
977
978static struct platform_driver sharpsl_pm_driver = {
979	.probe		= sharpsl_pm_probe,
980	.remove		= sharpsl_pm_remove,
981	.suspend	= sharpsl_pm_suspend,
982	.resume		= sharpsl_pm_resume,
983	.driver		= {
984		.name		= "sharpsl-pm",
985	},
986};
987
988static int __devinit sharpsl_pm_init(void)
989{
990	return platform_driver_register(&sharpsl_pm_driver);
991}
992
993static void sharpsl_pm_exit(void)
994{
995	platform_driver_unregister(&sharpsl_pm_driver);
996}
997
998late_initcall(sharpsl_pm_init);
999module_exit(sharpsl_pm_exit);