1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Phy drivers for Marvell platforms
  4#
  5config ARMADA375_USBCLUSTER_PHY
  6	bool "Armada 375 USB cluster PHY support" if COMPILE_TEST
  7	default y if MACH_ARMADA_375
  8	depends on OF && HAS_IOMEM
  9	select GENERIC_PHY
 10
 11config PHY_BERLIN_SATA
 12	tristate "Marvell Berlin SATA PHY driver"
 13	depends on ARCH_BERLIN || COMPILE_TEST
 14	depends on OF && HAS_IOMEM
 15	select GENERIC_PHY
 16	help
 17	  Enable this to support the SATA PHY on Marvell Berlin SoCs.
 18
 19config PHY_BERLIN_USB
 20	tristate "Marvell Berlin USB PHY Driver"
 21	depends on ARCH_BERLIN || COMPILE_TEST
 22	depends on OF && HAS_IOMEM && RESET_CONTROLLER
 23	select GENERIC_PHY
 24	help
 25	  Enable this to support the USB PHY on Marvell Berlin SoCs.
 26
 27config PHY_MVEBU_A3700_COMPHY
 28	tristate "Marvell A3700 comphy driver"
 29	depends on ARCH_MVEBU || COMPILE_TEST
 30	depends on OF
 31	depends on HAVE_ARM_SMCCC
 32	default y
 33	select GENERIC_PHY
 34	help
 35	  This driver allows to control the comphy, a hardware block providing
 36	  shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be
 37	  used by various controllers: Ethernet, SATA, USB3, PCIe.
 38
 39config PHY_MVEBU_A3700_UTMI
 40	tristate "Marvell A3700 UTMI driver"
 41	depends on ARCH_MVEBU || COMPILE_TEST
 42	depends on OF
 43	default y
 44	select GENERIC_PHY
 45	help
 46	  Enable this to support Marvell A3700 UTMI PHY driver.
 47
 48config PHY_MVEBU_A38X_COMPHY
 49	tristate "Marvell Armada 38x comphy driver"
 50	depends on ARCH_MVEBU || COMPILE_TEST
 51	depends on OF
 52	select GENERIC_PHY
 53	help
 54	  This driver allows to control the comphy, an hardware block providing
 55	  shared serdes PHYs on Marvell Armada 38x. Its serdes lanes can be
 56	  used by various controllers (Ethernet, sata, usb, PCIe...).
 57
 58config PHY_MVEBU_CP110_COMPHY
 59	tristate "Marvell CP110 comphy driver"
 60	depends on ARCH_MVEBU || COMPILE_TEST
 61	depends on OF
 62	depends on HAVE_ARM_SMCCC
 63	select GENERIC_PHY
 64	help
 65	  This driver allows to control the comphy, an hardware block providing
 66	  shared serdes PHYs on Marvell Armada 7k/8k (in the CP110). Its serdes
 67	  lanes can be used by various controllers (Ethernet, sata, usb,
 68	  PCIe...).
 69
 70config PHY_MVEBU_CP110_UTMI
 71	tristate "Marvell CP110 UTMI driver"
 72	depends on ARCH_MVEBU || COMPILE_TEST
 73	depends on OF && USB_COMMON
 74	select GENERIC_PHY
 75	help
 76	  Enable this to support Marvell CP110 UTMI PHY driver.
 77
 78config PHY_MVEBU_SATA
 79	def_bool y
 80	depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
 81	depends on OF
 82	select GENERIC_PHY
 83
 84config PHY_PXA_28NM_HSIC
 85	tristate "Marvell USB HSIC 28nm PHY Driver"
 86	depends on HAS_IOMEM
 87	select GENERIC_PHY
 88	help
 89	  Enable this to support Marvell USB HSIC PHY driver for Marvell
 90	  SoC. This driver will do the PHY initialization and shutdown.
 91	  The PHY driver will be used by Marvell ehci driver.
 92
 93	  To compile this driver as a module, choose M here.
 94
 95config PHY_PXA_28NM_USB2
 96	tristate "Marvell USB 2.0 28nm PHY Driver"
 97	depends on HAS_IOMEM
 98	select GENERIC_PHY
 99	help
100	  Enable this to support Marvell USB 2.0 PHY driver for Marvell
101	  SoC. This driver will do the PHY initialization and shutdown.
102	  The PHY driver will be used by Marvell udc/ehci/otg driver.
103
104	  To compile this driver as a module, choose M here.
105
106config PHY_PXA_USB
107	tristate "Marvell PXA USB PHY Driver"
108	depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
109	select GENERIC_PHY
110	help
111	  Enable this to support Marvell PXA USB PHY driver for Marvell
112	  SoC. This driver will do the PHY initialization and shutdown.
113	  The PHY driver will be used by Marvell udc/ehci/otg driver.
114
115	  To compile this driver as a module, choose M here.
116
117config PHY_MMP3_USB
118	tristate "Marvell MMP3 USB PHY Driver"
119	depends on MACH_MMP3_DT || COMPILE_TEST
120	select GENERIC_PHY
121	help
122	  Enable this to support Marvell MMP3 USB PHY driver for Marvell
123	  SoC. This driver will do the PHY initialization and shutdown.
124	  The PHY driver will be used by Marvell udc/ehci/otg driver.
125
126	  To compile this driver as a module, choose M here.
127
128config PHY_MMP3_HSIC
129	tristate "Marvell MMP3 USB HSIC PHY Driver"
130	depends on MACH_MMP3_DT || COMPILE_TEST
131	select GENERIC_PHY
132	help
133	  Enable this to support Marvell MMP3 USB HSIC PHY driver for
134	  Marvell MMP3 SoC. This driver will be used my the Marvell EHCI
135	  driver to initialize the interface to internal USB HSIC
136	  components on MMP3-based boards.
137
138	  To compile this driver as a module, choose M here.