Loading...
1/*
2 * Copyright (C) 2011 Dmitry Eremin-Solenikov
3 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
11 * that is iMac G5 and latest single CPU desktop.
12 */
13
14#undef DEBUG
15
16#include <linux/module.h>
17#include <linux/types.h>
18#include <linux/errno.h>
19#include <linux/kernel.h>
20#include <linux/delay.h>
21#include <linux/sched.h>
22#include <linux/cpufreq.h>
23#include <linux/init.h>
24#include <linux/completion.h>
25#include <linux/mutex.h>
26#include <linux/time.h>
27#include <linux/of.h>
28
29#define DBG(fmt...) pr_debug(fmt)
30
31/* see 970FX user manual */
32
33#define SCOM_PCR 0x0aa001 /* PCR scom addr */
34
35#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
36#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
37#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
38#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
39#define PCR_SPEED_MASK 0x000e0000U /* speed mask */
40#define PCR_SPEED_SHIFT 17
41#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
42#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
43#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
44#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
45#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
46#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */
47
48#define SCOM_PSR 0x408001 /* PSR scom addr */
49/* warning: PSR is a 64 bits register */
50#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
51#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
52#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
53#define PSR_CUR_SPEED_SHIFT (56)
54
55/*
56 * The G5 only supports two frequencies (Quarter speed is not supported)
57 */
58#define CPUFREQ_HIGH 0
59#define CPUFREQ_LOW 1
60
61static struct cpufreq_frequency_table maple_cpu_freqs[] = {
62 {CPUFREQ_HIGH, 0},
63 {CPUFREQ_LOW, 0},
64 {0, CPUFREQ_TABLE_END},
65};
66
67static struct freq_attr *maple_cpu_freqs_attr[] = {
68 &cpufreq_freq_attr_scaling_available_freqs,
69 NULL,
70};
71
72/* Power mode data is an array of the 32 bits PCR values to use for
73 * the various frequencies, retrieved from the device-tree
74 */
75static int maple_pmode_cur;
76
77static DEFINE_MUTEX(maple_switch_mutex);
78
79static const u32 *maple_pmode_data;
80static int maple_pmode_max;
81
82/*
83 * SCOM based frequency switching for 970FX rev3
84 */
85static int maple_scom_switch_freq(int speed_mode)
86{
87 unsigned long flags;
88 int to;
89
90 local_irq_save(flags);
91
92 /* Clear PCR high */
93 scom970_write(SCOM_PCR, 0);
94 /* Clear PCR low */
95 scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
96 /* Set PCR low */
97 scom970_write(SCOM_PCR, PCR_HILO_SELECT |
98 maple_pmode_data[speed_mode]);
99
100 /* Wait for completion */
101 for (to = 0; to < 10; to++) {
102 unsigned long psr = scom970_read(SCOM_PSR);
103
104 if ((psr & PSR_CMD_RECEIVED) == 0 &&
105 (((psr >> PSR_CUR_SPEED_SHIFT) ^
106 (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
107 == 0)
108 break;
109 if (psr & PSR_CMD_COMPLETED)
110 break;
111 udelay(100);
112 }
113
114 local_irq_restore(flags);
115
116 maple_pmode_cur = speed_mode;
117 ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul;
118
119 return 0;
120}
121
122static int maple_scom_query_freq(void)
123{
124 unsigned long psr = scom970_read(SCOM_PSR);
125 int i;
126
127 for (i = 0; i <= maple_pmode_max; i++)
128 if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
129 (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
130 break;
131 return i;
132}
133
134/*
135 * Common interface to the cpufreq core
136 */
137
138static int maple_cpufreq_verify(struct cpufreq_policy *policy)
139{
140 return cpufreq_frequency_table_verify(policy, maple_cpu_freqs);
141}
142
143static int maple_cpufreq_target(struct cpufreq_policy *policy,
144 unsigned int target_freq, unsigned int relation)
145{
146 unsigned int newstate = 0;
147 struct cpufreq_freqs freqs;
148 int rc;
149
150 if (cpufreq_frequency_table_target(policy, maple_cpu_freqs,
151 target_freq, relation, &newstate))
152 return -EINVAL;
153
154 if (maple_pmode_cur == newstate)
155 return 0;
156
157 mutex_lock(&maple_switch_mutex);
158
159 freqs.old = maple_cpu_freqs[maple_pmode_cur].frequency;
160 freqs.new = maple_cpu_freqs[newstate].frequency;
161 freqs.cpu = 0;
162
163 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
164 rc = maple_scom_switch_freq(newstate);
165 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
166
167 mutex_unlock(&maple_switch_mutex);
168
169 return rc;
170}
171
172static unsigned int maple_cpufreq_get_speed(unsigned int cpu)
173{
174 return maple_cpu_freqs[maple_pmode_cur].frequency;
175}
176
177static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy)
178{
179 policy->cpuinfo.transition_latency = 12000;
180 policy->cur = maple_cpu_freqs[maple_scom_query_freq()].frequency;
181 /* secondary CPUs are tied to the primary one by the
182 * cpufreq core if in the secondary policy we tell it that
183 * it actually must be one policy together with all others. */
184 cpumask_copy(policy->cpus, cpu_online_mask);
185 cpufreq_frequency_table_get_attr(maple_cpu_freqs, policy->cpu);
186
187 return cpufreq_frequency_table_cpuinfo(policy,
188 maple_cpu_freqs);
189}
190
191
192static struct cpufreq_driver maple_cpufreq_driver = {
193 .name = "maple",
194 .owner = THIS_MODULE,
195 .flags = CPUFREQ_CONST_LOOPS,
196 .init = maple_cpufreq_cpu_init,
197 .verify = maple_cpufreq_verify,
198 .target = maple_cpufreq_target,
199 .get = maple_cpufreq_get_speed,
200 .attr = maple_cpu_freqs_attr,
201};
202
203static int __init maple_cpufreq_init(void)
204{
205 struct device_node *cpus;
206 struct device_node *cpunode;
207 unsigned int psize;
208 unsigned long max_freq;
209 const u32 *valp;
210 u32 pvr_hi;
211 int rc = -ENODEV;
212
213 /*
214 * Behave here like powermac driver which checks machine compatibility
215 * to ease merging of two drivers in future.
216 */
217 if (!of_machine_is_compatible("Momentum,Maple") &&
218 !of_machine_is_compatible("Momentum,Apache"))
219 return 0;
220
221 cpus = of_find_node_by_path("/cpus");
222 if (cpus == NULL) {
223 DBG("No /cpus node !\n");
224 return -ENODEV;
225 }
226
227 /* Get first CPU node */
228 for (cpunode = NULL;
229 (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
230 const u32 *reg = of_get_property(cpunode, "reg", NULL);
231 if (reg == NULL || (*reg) != 0)
232 continue;
233 if (!strcmp(cpunode->type, "cpu"))
234 break;
235 }
236 if (cpunode == NULL) {
237 printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
238 goto bail_cpus;
239 }
240
241 /* Check 970FX for now */
242 /* we actually don't care on which CPU to access PVR */
243 pvr_hi = PVR_VER(mfspr(SPRN_PVR));
244 if (pvr_hi != 0x3c && pvr_hi != 0x44) {
245 printk(KERN_ERR "cpufreq: Unsupported CPU version (%x)\n",
246 pvr_hi);
247 goto bail_noprops;
248 }
249
250 /* Look for the powertune data in the device-tree */
251 /*
252 * On Maple this property is provided by PIBS in dual-processor config,
253 * not provided by PIBS in CPU0 config and also not provided by SLOF,
254 * so YMMV
255 */
256 maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize);
257 if (!maple_pmode_data) {
258 DBG("No power-mode-data !\n");
259 goto bail_noprops;
260 }
261 maple_pmode_max = psize / sizeof(u32) - 1;
262
263 /*
264 * From what I see, clock-frequency is always the maximal frequency.
265 * The current driver can not slew sysclk yet, so we really only deal
266 * with powertune steps for now. We also only implement full freq and
267 * half freq in this version. So far, I haven't yet seen a machine
268 * supporting anything else.
269 */
270 valp = of_get_property(cpunode, "clock-frequency", NULL);
271 if (!valp)
272 return -ENODEV;
273 max_freq = (*valp)/1000;
274 maple_cpu_freqs[0].frequency = max_freq;
275 maple_cpu_freqs[1].frequency = max_freq/2;
276
277 /* Force apply current frequency to make sure everything is in
278 * sync (voltage is right for example). Firmware may leave us with
279 * a strange setting ...
280 */
281 msleep(10);
282 maple_pmode_cur = -1;
283 maple_scom_switch_freq(maple_scom_query_freq());
284
285 printk(KERN_INFO "Registering Maple CPU frequency driver\n");
286 printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
287 maple_cpu_freqs[1].frequency/1000,
288 maple_cpu_freqs[0].frequency/1000,
289 maple_cpu_freqs[maple_pmode_cur].frequency/1000);
290
291 rc = cpufreq_register_driver(&maple_cpufreq_driver);
292
293 of_node_put(cpunode);
294 of_node_put(cpus);
295
296 return rc;
297
298bail_noprops:
299 of_node_put(cpunode);
300bail_cpus:
301 of_node_put(cpus);
302
303 return rc;
304}
305
306module_init(maple_cpufreq_init);
307
308
309MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2011 Dmitry Eremin-Solenikov
4 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
6 *
7 * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
8 * that is iMac G5 and latest single CPU desktop.
9 */
10
11#undef DEBUG
12
13#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
14
15#include <linux/module.h>
16#include <linux/types.h>
17#include <linux/errno.h>
18#include <linux/kernel.h>
19#include <linux/delay.h>
20#include <linux/sched.h>
21#include <linux/cpufreq.h>
22#include <linux/init.h>
23#include <linux/completion.h>
24#include <linux/mutex.h>
25#include <linux/time.h>
26#include <linux/of.h>
27
28#define DBG(fmt...) pr_debug(fmt)
29
30/* see 970FX user manual */
31
32#define SCOM_PCR 0x0aa001 /* PCR scom addr */
33
34#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
35#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
36#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
37#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
38#define PCR_SPEED_MASK 0x000e0000U /* speed mask */
39#define PCR_SPEED_SHIFT 17
40#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
41#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
42#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
43#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
44#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
45#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */
46
47#define SCOM_PSR 0x408001 /* PSR scom addr */
48/* warning: PSR is a 64 bits register */
49#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
50#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
51#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
52#define PSR_CUR_SPEED_SHIFT (56)
53
54/*
55 * The G5 only supports two frequencies (Quarter speed is not supported)
56 */
57#define CPUFREQ_HIGH 0
58#define CPUFREQ_LOW 1
59
60static struct cpufreq_frequency_table maple_cpu_freqs[] = {
61 {0, CPUFREQ_HIGH, 0},
62 {0, CPUFREQ_LOW, 0},
63 {0, 0, CPUFREQ_TABLE_END},
64};
65
66/* Power mode data is an array of the 32 bits PCR values to use for
67 * the various frequencies, retrieved from the device-tree
68 */
69static int maple_pmode_cur;
70
71static const u32 *maple_pmode_data;
72static int maple_pmode_max;
73
74/*
75 * SCOM based frequency switching for 970FX rev3
76 */
77static int maple_scom_switch_freq(int speed_mode)
78{
79 unsigned long flags;
80 int to;
81
82 local_irq_save(flags);
83
84 /* Clear PCR high */
85 scom970_write(SCOM_PCR, 0);
86 /* Clear PCR low */
87 scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
88 /* Set PCR low */
89 scom970_write(SCOM_PCR, PCR_HILO_SELECT |
90 maple_pmode_data[speed_mode]);
91
92 /* Wait for completion */
93 for (to = 0; to < 10; to++) {
94 unsigned long psr = scom970_read(SCOM_PSR);
95
96 if ((psr & PSR_CMD_RECEIVED) == 0 &&
97 (((psr >> PSR_CUR_SPEED_SHIFT) ^
98 (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
99 == 0)
100 break;
101 if (psr & PSR_CMD_COMPLETED)
102 break;
103 udelay(100);
104 }
105
106 local_irq_restore(flags);
107
108 maple_pmode_cur = speed_mode;
109 ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul;
110
111 return 0;
112}
113
114static int maple_scom_query_freq(void)
115{
116 unsigned long psr = scom970_read(SCOM_PSR);
117 int i;
118
119 for (i = 0; i <= maple_pmode_max; i++)
120 if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
121 (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
122 break;
123 return i;
124}
125
126/*
127 * Common interface to the cpufreq core
128 */
129
130static int maple_cpufreq_target(struct cpufreq_policy *policy,
131 unsigned int index)
132{
133 return maple_scom_switch_freq(index);
134}
135
136static unsigned int maple_cpufreq_get_speed(unsigned int cpu)
137{
138 return maple_cpu_freqs[maple_pmode_cur].frequency;
139}
140
141static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy)
142{
143 cpufreq_generic_init(policy, maple_cpu_freqs, 12000);
144 return 0;
145}
146
147static struct cpufreq_driver maple_cpufreq_driver = {
148 .name = "maple",
149 .flags = CPUFREQ_CONST_LOOPS,
150 .init = maple_cpufreq_cpu_init,
151 .verify = cpufreq_generic_frequency_table_verify,
152 .target_index = maple_cpufreq_target,
153 .get = maple_cpufreq_get_speed,
154 .attr = cpufreq_generic_attr,
155};
156
157static int __init maple_cpufreq_init(void)
158{
159 struct device_node *cpunode;
160 unsigned int psize;
161 unsigned long max_freq;
162 const u32 *valp;
163 u32 pvr_hi;
164 int rc = -ENODEV;
165
166 /*
167 * Behave here like powermac driver which checks machine compatibility
168 * to ease merging of two drivers in future.
169 */
170 if (!of_machine_is_compatible("Momentum,Maple") &&
171 !of_machine_is_compatible("Momentum,Apache"))
172 return 0;
173
174 /* Get first CPU node */
175 cpunode = of_cpu_device_node_get(0);
176 if (cpunode == NULL) {
177 pr_err("Can't find any CPU 0 node\n");
178 goto bail_noprops;
179 }
180
181 /* Check 970FX for now */
182 /* we actually don't care on which CPU to access PVR */
183 pvr_hi = PVR_VER(mfspr(SPRN_PVR));
184 if (pvr_hi != 0x3c && pvr_hi != 0x44) {
185 pr_err("Unsupported CPU version (%x)\n", pvr_hi);
186 goto bail_noprops;
187 }
188
189 /* Look for the powertune data in the device-tree */
190 /*
191 * On Maple this property is provided by PIBS in dual-processor config,
192 * not provided by PIBS in CPU0 config and also not provided by SLOF,
193 * so YMMV
194 */
195 maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize);
196 if (!maple_pmode_data) {
197 DBG("No power-mode-data !\n");
198 goto bail_noprops;
199 }
200 maple_pmode_max = psize / sizeof(u32) - 1;
201
202 /*
203 * From what I see, clock-frequency is always the maximal frequency.
204 * The current driver can not slew sysclk yet, so we really only deal
205 * with powertune steps for now. We also only implement full freq and
206 * half freq in this version. So far, I haven't yet seen a machine
207 * supporting anything else.
208 */
209 valp = of_get_property(cpunode, "clock-frequency", NULL);
210 if (!valp)
211 goto bail_noprops;
212 max_freq = (*valp)/1000;
213 maple_cpu_freqs[0].frequency = max_freq;
214 maple_cpu_freqs[1].frequency = max_freq/2;
215
216 /* Force apply current frequency to make sure everything is in
217 * sync (voltage is right for example). Firmware may leave us with
218 * a strange setting ...
219 */
220 msleep(10);
221 maple_pmode_cur = -1;
222 maple_scom_switch_freq(maple_scom_query_freq());
223
224 pr_info("Registering Maple CPU frequency driver\n");
225 pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
226 maple_cpu_freqs[1].frequency/1000,
227 maple_cpu_freqs[0].frequency/1000,
228 maple_cpu_freqs[maple_pmode_cur].frequency/1000);
229
230 rc = cpufreq_register_driver(&maple_cpufreq_driver);
231
232bail_noprops:
233 of_node_put(cpunode);
234
235 return rc;
236}
237
238module_init(maple_cpufreq_init);
239
240
241MODULE_LICENSE("GPL");