Loading...
1/*
2 * Copyright (c) 2005 Voltaire Inc. All rights reserved.
3 * Copyright (c) 2005 Intel Corporation. All rights reserved.
4 *
5 * This software is available to you under a choice of one of two
6 * licenses. You may choose to be licensed under the terms of the GNU
7 * General Public License (GPL) Version 2, available from the file
8 * COPYING in the main directory of this source tree, or the
9 * OpenIB.org BSD license below:
10 *
11 * Redistribution and use in source and binary forms, with or
12 * without modification, are permitted provided that the following
13 * conditions are met:
14 *
15 * - Redistributions of source code must retain the above
16 * copyright notice, this list of conditions and the following
17 * disclaimer.
18 *
19 * - Redistributions in binary form must reproduce the above
20 * copyright notice, this list of conditions and the following
21 * disclaimer in the documentation and/or other materials
22 * provided with the distribution.
23 *
24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
31 * SOFTWARE.
32 */
33
34#if !defined(RDMA_CM_H)
35#define RDMA_CM_H
36
37#include <linux/socket.h>
38#include <linux/in6.h>
39#include <rdma/ib_addr.h>
40#include <rdma/ib_sa.h>
41
42/*
43 * Upon receiving a device removal event, users must destroy the associated
44 * RDMA identifier and release all resources allocated with the device.
45 */
46enum rdma_cm_event_type {
47 RDMA_CM_EVENT_ADDR_RESOLVED,
48 RDMA_CM_EVENT_ADDR_ERROR,
49 RDMA_CM_EVENT_ROUTE_RESOLVED,
50 RDMA_CM_EVENT_ROUTE_ERROR,
51 RDMA_CM_EVENT_CONNECT_REQUEST,
52 RDMA_CM_EVENT_CONNECT_RESPONSE,
53 RDMA_CM_EVENT_CONNECT_ERROR,
54 RDMA_CM_EVENT_UNREACHABLE,
55 RDMA_CM_EVENT_REJECTED,
56 RDMA_CM_EVENT_ESTABLISHED,
57 RDMA_CM_EVENT_DISCONNECTED,
58 RDMA_CM_EVENT_DEVICE_REMOVAL,
59 RDMA_CM_EVENT_MULTICAST_JOIN,
60 RDMA_CM_EVENT_MULTICAST_ERROR,
61 RDMA_CM_EVENT_ADDR_CHANGE,
62 RDMA_CM_EVENT_TIMEWAIT_EXIT
63};
64
65enum rdma_port_space {
66 RDMA_PS_SDP = 0x0001,
67 RDMA_PS_IPOIB = 0x0002,
68 RDMA_PS_TCP = 0x0106,
69 RDMA_PS_UDP = 0x0111,
70};
71
72struct rdma_addr {
73 struct sockaddr_storage src_addr;
74 struct sockaddr_storage dst_addr;
75 struct rdma_dev_addr dev_addr;
76};
77
78struct rdma_route {
79 struct rdma_addr addr;
80 struct ib_sa_path_rec *path_rec;
81 int num_paths;
82};
83
84struct rdma_conn_param {
85 const void *private_data;
86 u8 private_data_len;
87 u8 responder_resources;
88 u8 initiator_depth;
89 u8 flow_control;
90 u8 retry_count; /* ignored when accepting */
91 u8 rnr_retry_count;
92 /* Fields below ignored if a QP is created on the rdma_cm_id. */
93 u8 srq;
94 u32 qp_num;
95};
96
97struct rdma_ud_param {
98 const void *private_data;
99 u8 private_data_len;
100 struct ib_ah_attr ah_attr;
101 u32 qp_num;
102 u32 qkey;
103};
104
105struct rdma_cm_event {
106 enum rdma_cm_event_type event;
107 int status;
108 union {
109 struct rdma_conn_param conn;
110 struct rdma_ud_param ud;
111 } param;
112};
113
114enum rdma_cm_state {
115 RDMA_CM_IDLE,
116 RDMA_CM_ADDR_QUERY,
117 RDMA_CM_ADDR_RESOLVED,
118 RDMA_CM_ROUTE_QUERY,
119 RDMA_CM_ROUTE_RESOLVED,
120 RDMA_CM_CONNECT,
121 RDMA_CM_DISCONNECT,
122 RDMA_CM_ADDR_BOUND,
123 RDMA_CM_LISTEN,
124 RDMA_CM_DEVICE_REMOVAL,
125 RDMA_CM_DESTROYING
126};
127
128struct rdma_cm_id;
129
130/**
131 * rdma_cm_event_handler - Callback used to report user events.
132 *
133 * Notes: Users may not call rdma_destroy_id from this callback to destroy
134 * the passed in id, or a corresponding listen id. Returning a
135 * non-zero value from the callback will destroy the passed in id.
136 */
137typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id,
138 struct rdma_cm_event *event);
139
140struct rdma_cm_id {
141 struct ib_device *device;
142 void *context;
143 struct ib_qp *qp;
144 rdma_cm_event_handler event_handler;
145 struct rdma_route route;
146 enum rdma_port_space ps;
147 enum ib_qp_type qp_type;
148 u8 port_num;
149};
150
151/**
152 * rdma_create_id - Create an RDMA identifier.
153 *
154 * @event_handler: User callback invoked to report events associated with the
155 * returned rdma_id.
156 * @context: User specified context associated with the id.
157 * @ps: RDMA port space.
158 * @qp_type: type of queue pair associated with the id.
159 */
160struct rdma_cm_id *rdma_create_id(rdma_cm_event_handler event_handler,
161 void *context, enum rdma_port_space ps,
162 enum ib_qp_type qp_type);
163
164/**
165 * rdma_destroy_id - Destroys an RDMA identifier.
166 *
167 * @id: RDMA identifier.
168 *
169 * Note: calling this function has the effect of canceling in-flight
170 * asynchronous operations associated with the id.
171 */
172void rdma_destroy_id(struct rdma_cm_id *id);
173
174/**
175 * rdma_bind_addr - Bind an RDMA identifier to a source address and
176 * associated RDMA device, if needed.
177 *
178 * @id: RDMA identifier.
179 * @addr: Local address information. Wildcard values are permitted.
180 *
181 * This associates a source address with the RDMA identifier before calling
182 * rdma_listen. If a specific local address is given, the RDMA identifier will
183 * be bound to a local RDMA device.
184 */
185int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr);
186
187/**
188 * rdma_resolve_addr - Resolve destination and optional source addresses
189 * from IP addresses to an RDMA address. If successful, the specified
190 * rdma_cm_id will be bound to a local device.
191 *
192 * @id: RDMA identifier.
193 * @src_addr: Source address information. This parameter may be NULL.
194 * @dst_addr: Destination address information.
195 * @timeout_ms: Time to wait for resolution to complete.
196 */
197int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr,
198 struct sockaddr *dst_addr, int timeout_ms);
199
200/**
201 * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier
202 * into route information needed to establish a connection.
203 *
204 * This is called on the client side of a connection.
205 * Users must have first called rdma_resolve_addr to resolve a dst_addr
206 * into an RDMA address before calling this routine.
207 */
208int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms);
209
210/**
211 * rdma_create_qp - Allocate a QP and associate it with the specified RDMA
212 * identifier.
213 *
214 * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA
215 * through their states.
216 */
217int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd,
218 struct ib_qp_init_attr *qp_init_attr);
219
220/**
221 * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA
222 * identifier.
223 *
224 * Users must destroy any QP associated with an RDMA identifier before
225 * destroying the RDMA ID.
226 */
227void rdma_destroy_qp(struct rdma_cm_id *id);
228
229/**
230 * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning
231 * to a specified QP state.
232 * @id: Communication identifier associated with the QP attributes to
233 * initialize.
234 * @qp_attr: On input, specifies the desired QP state. On output, the
235 * mandatory and desired optional attributes will be set in order to
236 * modify the QP to the specified state.
237 * @qp_attr_mask: The QP attribute mask that may be used to transition the
238 * QP to the specified state.
239 *
240 * Users must set the @qp_attr->qp_state to the desired QP state. This call
241 * will set all required attributes for the given transition, along with
242 * known optional attributes. Users may override the attributes returned from
243 * this call before calling ib_modify_qp.
244 *
245 * Users that wish to have their QP automatically transitioned through its
246 * states can associate a QP with the rdma_cm_id by calling rdma_create_qp().
247 */
248int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr,
249 int *qp_attr_mask);
250
251/**
252 * rdma_connect - Initiate an active connection request.
253 * @id: Connection identifier to connect.
254 * @conn_param: Connection information used for connected QPs.
255 *
256 * Users must have resolved a route for the rdma_cm_id to connect with
257 * by having called rdma_resolve_route before calling this routine.
258 *
259 * This call will either connect to a remote QP or obtain remote QP
260 * information for unconnected rdma_cm_id's. The actual operation is
261 * based on the rdma_cm_id's port space.
262 */
263int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
264
265/**
266 * rdma_listen - This function is called by the passive side to
267 * listen for incoming connection requests.
268 *
269 * Users must have bound the rdma_cm_id to a local address by calling
270 * rdma_bind_addr before calling this routine.
271 */
272int rdma_listen(struct rdma_cm_id *id, int backlog);
273
274/**
275 * rdma_accept - Called to accept a connection request or response.
276 * @id: Connection identifier associated with the request.
277 * @conn_param: Information needed to establish the connection. This must be
278 * provided if accepting a connection request. If accepting a connection
279 * response, this parameter must be NULL.
280 *
281 * Typically, this routine is only called by the listener to accept a connection
282 * request. It must also be called on the active side of a connection if the
283 * user is performing their own QP transitions.
284 *
285 * In the case of error, a reject message is sent to the remote side and the
286 * state of the qp associated with the id is modified to error, such that any
287 * previously posted receive buffers would be flushed.
288 */
289int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
290
291/**
292 * rdma_notify - Notifies the RDMA CM of an asynchronous event that has
293 * occurred on the connection.
294 * @id: Connection identifier to transition to established.
295 * @event: Asynchronous event.
296 *
297 * This routine should be invoked by users to notify the CM of relevant
298 * communication events. Events that should be reported to the CM and
299 * when to report them are:
300 *
301 * IB_EVENT_COMM_EST - Used when a message is received on a connected
302 * QP before an RTU has been received.
303 */
304int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event);
305
306/**
307 * rdma_reject - Called to reject a connection request or response.
308 */
309int rdma_reject(struct rdma_cm_id *id, const void *private_data,
310 u8 private_data_len);
311
312/**
313 * rdma_disconnect - This function disconnects the associated QP and
314 * transitions it into the error state.
315 */
316int rdma_disconnect(struct rdma_cm_id *id);
317
318/**
319 * rdma_join_multicast - Join the multicast group specified by the given
320 * address.
321 * @id: Communication identifier associated with the request.
322 * @addr: Multicast address identifying the group to join.
323 * @context: User-defined context associated with the join request, returned
324 * to the user through the private_data pointer in multicast events.
325 */
326int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
327 void *context);
328
329/**
330 * rdma_leave_multicast - Leave the multicast group specified by the given
331 * address.
332 */
333void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr);
334
335/**
336 * rdma_set_service_type - Set the type of service associated with a
337 * connection identifier.
338 * @id: Communication identifier to associated with service type.
339 * @tos: Type of service.
340 *
341 * The type of service is interpretted as a differentiated service
342 * field (RFC 2474). The service type should be specified before
343 * performing route resolution, as existing communication on the
344 * connection identifier may be unaffected. The type of service
345 * requested may not be supported by the network to all destinations.
346 */
347void rdma_set_service_type(struct rdma_cm_id *id, int tos);
348
349/**
350 * rdma_set_reuseaddr - Allow the reuse of local addresses when binding
351 * the rdma_cm_id.
352 * @id: Communication identifier to configure.
353 * @reuse: Value indicating if the bound address is reusable.
354 *
355 * Reuse must be set before an address is bound to the id.
356 */
357int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse);
358
359#endif /* RDMA_CM_H */
1/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
2/*
3 * Copyright (c) 2005 Voltaire Inc. All rights reserved.
4 * Copyright (c) 2005 Intel Corporation. All rights reserved.
5 */
6
7#ifndef RDMA_CM_H
8#define RDMA_CM_H
9
10#include <linux/socket.h>
11#include <linux/in6.h>
12#include <rdma/ib_addr.h>
13#include <rdma/ib_sa.h>
14#include <uapi/rdma/rdma_user_cm.h>
15
16/*
17 * Upon receiving a device removal event, users must destroy the associated
18 * RDMA identifier and release all resources allocated with the device.
19 */
20enum rdma_cm_event_type {
21 RDMA_CM_EVENT_ADDR_RESOLVED,
22 RDMA_CM_EVENT_ADDR_ERROR,
23 RDMA_CM_EVENT_ROUTE_RESOLVED,
24 RDMA_CM_EVENT_ROUTE_ERROR,
25 RDMA_CM_EVENT_CONNECT_REQUEST,
26 RDMA_CM_EVENT_CONNECT_RESPONSE,
27 RDMA_CM_EVENT_CONNECT_ERROR,
28 RDMA_CM_EVENT_UNREACHABLE,
29 RDMA_CM_EVENT_REJECTED,
30 RDMA_CM_EVENT_ESTABLISHED,
31 RDMA_CM_EVENT_DISCONNECTED,
32 RDMA_CM_EVENT_DEVICE_REMOVAL,
33 RDMA_CM_EVENT_MULTICAST_JOIN,
34 RDMA_CM_EVENT_MULTICAST_ERROR,
35 RDMA_CM_EVENT_ADDR_CHANGE,
36 RDMA_CM_EVENT_TIMEWAIT_EXIT
37};
38
39const char *__attribute_const__ rdma_event_msg(enum rdma_cm_event_type event);
40
41#define RDMA_IB_IP_PS_MASK 0xFFFFFFFFFFFF0000ULL
42#define RDMA_IB_IP_PS_TCP 0x0000000001060000ULL
43#define RDMA_IB_IP_PS_UDP 0x0000000001110000ULL
44#define RDMA_IB_IP_PS_IB 0x00000000013F0000ULL
45
46struct rdma_addr {
47 struct sockaddr_storage src_addr;
48 struct sockaddr_storage dst_addr;
49 struct rdma_dev_addr dev_addr;
50};
51
52struct rdma_route {
53 struct rdma_addr addr;
54 struct sa_path_rec *path_rec;
55
56 /* Optional path records of primary path */
57 struct sa_path_rec *path_rec_inbound;
58 struct sa_path_rec *path_rec_outbound;
59
60 /*
61 * 0 - No primary nor alternate path is available
62 * 1 - Only primary path is available
63 * 2 - Both primary and alternate path are available
64 */
65 int num_pri_alt_paths;
66};
67
68struct rdma_conn_param {
69 const void *private_data;
70 u8 private_data_len;
71 u8 responder_resources;
72 u8 initiator_depth;
73 u8 flow_control;
74 u8 retry_count; /* ignored when accepting */
75 u8 rnr_retry_count;
76 /* Fields below ignored if a QP is created on the rdma_cm_id. */
77 u8 srq;
78 u32 qp_num;
79 u32 qkey;
80};
81
82struct rdma_ud_param {
83 const void *private_data;
84 u8 private_data_len;
85 struct rdma_ah_attr ah_attr;
86 u32 qp_num;
87 u32 qkey;
88};
89
90struct rdma_cm_event {
91 enum rdma_cm_event_type event;
92 int status;
93 union {
94 struct rdma_conn_param conn;
95 struct rdma_ud_param ud;
96 } param;
97 struct rdma_ucm_ece ece;
98};
99
100struct rdma_cm_id;
101
102/**
103 * rdma_cm_event_handler - Callback used to report user events.
104 *
105 * Notes: Users may not call rdma_destroy_id from this callback to destroy
106 * the passed in id, or a corresponding listen id. Returning a
107 * non-zero value from the callback will destroy the passed in id.
108 */
109typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id,
110 struct rdma_cm_event *event);
111
112struct rdma_cm_id {
113 struct ib_device *device;
114 void *context;
115 struct ib_qp *qp;
116 rdma_cm_event_handler event_handler;
117 struct rdma_route route;
118 enum rdma_ucm_port_space ps;
119 enum ib_qp_type qp_type;
120 u32 port_num;
121 struct work_struct net_work;
122};
123
124struct rdma_cm_id *
125__rdma_create_kernel_id(struct net *net, rdma_cm_event_handler event_handler,
126 void *context, enum rdma_ucm_port_space ps,
127 enum ib_qp_type qp_type, const char *caller);
128struct rdma_cm_id *rdma_create_user_id(rdma_cm_event_handler event_handler,
129 void *context,
130 enum rdma_ucm_port_space ps,
131 enum ib_qp_type qp_type);
132
133/**
134 * rdma_create_id - Create an RDMA identifier.
135 *
136 * @net: The network namespace in which to create the new id.
137 * @event_handler: User callback invoked to report events associated with the
138 * returned rdma_id.
139 * @context: User specified context associated with the id.
140 * @ps: RDMA port space.
141 * @qp_type: type of queue pair associated with the id.
142 *
143 * Returns a new rdma_cm_id. The id holds a reference on the network
144 * namespace until it is destroyed.
145 *
146 * The event handler callback serializes on the id's mutex and is
147 * allowed to sleep.
148 */
149#define rdma_create_id(net, event_handler, context, ps, qp_type) \
150 __rdma_create_kernel_id(net, event_handler, context, ps, qp_type, \
151 KBUILD_MODNAME)
152
153/**
154 * rdma_destroy_id - Destroys an RDMA identifier.
155 *
156 * @id: RDMA identifier.
157 *
158 * Note: calling this function has the effect of canceling in-flight
159 * asynchronous operations associated with the id.
160 */
161void rdma_destroy_id(struct rdma_cm_id *id);
162
163/**
164 * rdma_bind_addr - Bind an RDMA identifier to a source address and
165 * associated RDMA device, if needed.
166 *
167 * @id: RDMA identifier.
168 * @addr: Local address information. Wildcard values are permitted.
169 *
170 * This associates a source address with the RDMA identifier before calling
171 * rdma_listen. If a specific local address is given, the RDMA identifier will
172 * be bound to a local RDMA device.
173 */
174int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr);
175
176/**
177 * rdma_resolve_addr - Resolve destination and optional source addresses
178 * from IP addresses to an RDMA address. If successful, the specified
179 * rdma_cm_id will be bound to a local device.
180 *
181 * @id: RDMA identifier.
182 * @src_addr: Source address information. This parameter may be NULL.
183 * @dst_addr: Destination address information.
184 * @timeout_ms: Time to wait for resolution to complete.
185 */
186int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr,
187 const struct sockaddr *dst_addr,
188 unsigned long timeout_ms);
189
190/**
191 * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier
192 * into route information needed to establish a connection.
193 *
194 * This is called on the client side of a connection.
195 * Users must have first called rdma_resolve_addr to resolve a dst_addr
196 * into an RDMA address before calling this routine.
197 */
198int rdma_resolve_route(struct rdma_cm_id *id, unsigned long timeout_ms);
199
200/**
201 * rdma_create_qp - Allocate a QP and associate it with the specified RDMA
202 * identifier.
203 *
204 * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA
205 * through their states.
206 */
207int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd,
208 struct ib_qp_init_attr *qp_init_attr);
209
210/**
211 * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA
212 * identifier.
213 *
214 * Users must destroy any QP associated with an RDMA identifier before
215 * destroying the RDMA ID.
216 */
217void rdma_destroy_qp(struct rdma_cm_id *id);
218
219/**
220 * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning
221 * to a specified QP state.
222 * @id: Communication identifier associated with the QP attributes to
223 * initialize.
224 * @qp_attr: On input, specifies the desired QP state. On output, the
225 * mandatory and desired optional attributes will be set in order to
226 * modify the QP to the specified state.
227 * @qp_attr_mask: The QP attribute mask that may be used to transition the
228 * QP to the specified state.
229 *
230 * Users must set the @qp_attr->qp_state to the desired QP state. This call
231 * will set all required attributes for the given transition, along with
232 * known optional attributes. Users may override the attributes returned from
233 * this call before calling ib_modify_qp.
234 *
235 * Users that wish to have their QP automatically transitioned through its
236 * states can associate a QP with the rdma_cm_id by calling rdma_create_qp().
237 */
238int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr,
239 int *qp_attr_mask);
240
241int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
242int rdma_connect_locked(struct rdma_cm_id *id,
243 struct rdma_conn_param *conn_param);
244
245int rdma_connect_ece(struct rdma_cm_id *id, struct rdma_conn_param *conn_param,
246 struct rdma_ucm_ece *ece);
247
248/**
249 * rdma_listen - This function is called by the passive side to
250 * listen for incoming connection requests.
251 *
252 * Users must have bound the rdma_cm_id to a local address by calling
253 * rdma_bind_addr before calling this routine.
254 */
255int rdma_listen(struct rdma_cm_id *id, int backlog);
256
257int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
258
259void rdma_lock_handler(struct rdma_cm_id *id);
260void rdma_unlock_handler(struct rdma_cm_id *id);
261int rdma_accept_ece(struct rdma_cm_id *id, struct rdma_conn_param *conn_param,
262 struct rdma_ucm_ece *ece);
263
264/**
265 * rdma_notify - Notifies the RDMA CM of an asynchronous event that has
266 * occurred on the connection.
267 * @id: Connection identifier to transition to established.
268 * @event: Asynchronous event.
269 *
270 * This routine should be invoked by users to notify the CM of relevant
271 * communication events. Events that should be reported to the CM and
272 * when to report them are:
273 *
274 * IB_EVENT_COMM_EST - Used when a message is received on a connected
275 * QP before an RTU has been received.
276 */
277int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event);
278
279/**
280 * rdma_reject - Called to reject a connection request or response.
281 */
282int rdma_reject(struct rdma_cm_id *id, const void *private_data,
283 u8 private_data_len, u8 reason);
284
285/**
286 * rdma_disconnect - This function disconnects the associated QP and
287 * transitions it into the error state.
288 */
289int rdma_disconnect(struct rdma_cm_id *id);
290
291/**
292 * rdma_join_multicast - Join the multicast group specified by the given
293 * address.
294 * @id: Communication identifier associated with the request.
295 * @addr: Multicast address identifying the group to join.
296 * @join_state: Multicast JoinState bitmap requested by port.
297 * Bitmap is based on IB_SA_MCMEMBER_REC_JOIN_STATE bits.
298 * @context: User-defined context associated with the join request, returned
299 * to the user through the private_data pointer in multicast events.
300 */
301int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
302 u8 join_state, void *context);
303
304/**
305 * rdma_leave_multicast - Leave the multicast group specified by the given
306 * address.
307 */
308void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr);
309
310/**
311 * rdma_set_service_type - Set the type of service associated with a
312 * connection identifier.
313 * @id: Communication identifier to associated with service type.
314 * @tos: Type of service.
315 *
316 * The type of service is interpretted as a differentiated service
317 * field (RFC 2474). The service type should be specified before
318 * performing route resolution, as existing communication on the
319 * connection identifier may be unaffected. The type of service
320 * requested may not be supported by the network to all destinations.
321 */
322void rdma_set_service_type(struct rdma_cm_id *id, int tos);
323
324/**
325 * rdma_set_reuseaddr - Allow the reuse of local addresses when binding
326 * the rdma_cm_id.
327 * @id: Communication identifier to configure.
328 * @reuse: Value indicating if the bound address is reusable.
329 *
330 * Reuse must be set before an address is bound to the id.
331 */
332int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse);
333
334/**
335 * rdma_set_afonly - Specify that listens are restricted to the
336 * bound address family only.
337 * @id: Communication identifer to configure.
338 * @afonly: Value indicating if listens are restricted.
339 *
340 * Must be set before identifier is in the listening state.
341 */
342int rdma_set_afonly(struct rdma_cm_id *id, int afonly);
343
344int rdma_set_ack_timeout(struct rdma_cm_id *id, u8 timeout);
345
346int rdma_set_min_rnr_timer(struct rdma_cm_id *id, u8 min_rnr_timer);
347 /**
348 * rdma_get_service_id - Return the IB service ID for a specified address.
349 * @id: Communication identifier associated with the address.
350 * @addr: Address for the service ID.
351 */
352__be64 rdma_get_service_id(struct rdma_cm_id *id, struct sockaddr *addr);
353
354/**
355 * rdma_reject_msg - return a pointer to a reject message string.
356 * @id: Communication identifier that received the REJECT event.
357 * @reason: Value returned in the REJECT event status field.
358 */
359const char *__attribute_const__ rdma_reject_msg(struct rdma_cm_id *id,
360 int reason);
361/**
362 * rdma_consumer_reject_data - return the consumer reject private data and
363 * length, if any.
364 * @id: Communication identifier that received the REJECT event.
365 * @ev: RDMA CM reject event.
366 * @data_len: Pointer to the resulting length of the consumer data.
367 */
368const void *rdma_consumer_reject_data(struct rdma_cm_id *id,
369 struct rdma_cm_event *ev, u8 *data_len);
370
371/**
372 * rdma_read_gids - Return the SGID and DGID used for establishing
373 * connection. This can be used after rdma_resolve_addr()
374 * on client side. This can be use on new connection
375 * on server side. This is applicable to IB, RoCE, iWarp.
376 * If cm_id is not bound yet to the RDMA device, it doesn't
377 * copy and SGID or DGID to the given pointers.
378 * @id: Communication identifier whose GIDs are queried.
379 * @sgid: Pointer to SGID where SGID will be returned. It is optional.
380 * @dgid: Pointer to DGID where DGID will be returned. It is optional.
381 * Note: This API should not be used by any new ULPs or new code.
382 * Instead, users interested in querying GIDs should refer to path record
383 * of the rdma_cm_id to query the GIDs.
384 * This API is provided for compatibility for existing users.
385 */
386
387void rdma_read_gids(struct rdma_cm_id *cm_id, union ib_gid *sgid,
388 union ib_gid *dgid);
389
390struct iw_cm_id *rdma_iw_cm_id(struct rdma_cm_id *cm_id);
391struct rdma_cm_id *rdma_res_to_id(struct rdma_restrack_entry *res);
392
393#endif /* RDMA_CM_H */