Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * max8973-regulator.c -- Maxim max8973A
4 *
5 * Regulator driver for MAXIM 8973A DC-DC step-down switching regulator.
6 *
7 * Copyright (c) 2012, NVIDIA Corporation.
8 *
9 * Author: Laxman Dewangan <ldewangan@nvidia.com>
10 */
11
12#include <linux/kernel.h>
13#include <linux/module.h>
14#include <linux/init.h>
15#include <linux/err.h>
16#include <linux/of.h>
17#include <linux/of_device.h>
18#include <linux/platform_device.h>
19#include <linux/regulator/driver.h>
20#include <linux/regulator/machine.h>
21#include <linux/regulator/max8973-regulator.h>
22#include <linux/regulator/of_regulator.h>
23#include <linux/gpio/consumer.h>
24#include <linux/i2c.h>
25#include <linux/slab.h>
26#include <linux/regmap.h>
27#include <linux/thermal.h>
28#include <linux/irq.h>
29#include <linux/interrupt.h>
30
31/* Register definitions */
32#define MAX8973_VOUT 0x0
33#define MAX8973_VOUT_DVS 0x1
34#define MAX8973_CONTROL1 0x2
35#define MAX8973_CONTROL2 0x3
36#define MAX8973_CHIPID1 0x4
37#define MAX8973_CHIPID2 0x5
38
39#define MAX8973_MAX_VOUT_REG 2
40
41/* MAX8973_VOUT */
42#define MAX8973_VOUT_ENABLE BIT(7)
43#define MAX8973_VOUT_MASK 0x7F
44
45/* MAX8973_VOUT_DVS */
46#define MAX8973_DVS_VOUT_MASK 0x7F
47
48/* MAX8973_CONTROL1 */
49#define MAX8973_SNS_ENABLE BIT(7)
50#define MAX8973_FPWM_EN_M BIT(6)
51#define MAX8973_NFSR_ENABLE BIT(5)
52#define MAX8973_AD_ENABLE BIT(4)
53#define MAX8973_BIAS_ENABLE BIT(3)
54#define MAX8973_FREQSHIFT_9PER BIT(2)
55
56#define MAX8973_RAMP_12mV_PER_US 0x0
57#define MAX8973_RAMP_25mV_PER_US 0x1
58#define MAX8973_RAMP_50mV_PER_US 0x2
59#define MAX8973_RAMP_200mV_PER_US 0x3
60#define MAX8973_RAMP_MASK 0x3
61
62/* MAX8973_CONTROL2 */
63#define MAX8973_WDTMR_ENABLE BIT(6)
64#define MAX8973_DISCH_ENBABLE BIT(5)
65#define MAX8973_FT_ENABLE BIT(4)
66#define MAX77621_T_JUNCTION_120 BIT(7)
67
68#define MAX8973_CKKADV_TRIP_MASK 0xC
69#define MAX8973_CKKADV_TRIP_DISABLE 0xC
70#define MAX8973_CKKADV_TRIP_75mV_PER_US 0x0
71#define MAX8973_CKKADV_TRIP_150mV_PER_US 0x4
72#define MAX8973_CKKADV_TRIP_75mV_PER_US_HIST_DIS 0x8
73#define MAX8973_CONTROL_CLKADV_TRIP_MASK 0x00030000
74
75#define MAX8973_INDUCTOR_MIN_30_PER 0x0
76#define MAX8973_INDUCTOR_NOMINAL 0x1
77#define MAX8973_INDUCTOR_PLUS_30_PER 0x2
78#define MAX8973_INDUCTOR_PLUS_60_PER 0x3
79#define MAX8973_CONTROL_INDUCTOR_VALUE_MASK 0x00300000
80
81#define MAX8973_MIN_VOLATGE 606250
82#define MAX8973_MAX_VOLATGE 1400000
83#define MAX8973_VOLATGE_STEP 6250
84#define MAX8973_BUCK_N_VOLTAGE 0x80
85
86#define MAX77621_CHIPID_TJINT_S BIT(0)
87
88#define MAX77621_NORMAL_OPERATING_TEMP 100000
89#define MAX77621_TJINT_WARNING_TEMP_120 120000
90#define MAX77621_TJINT_WARNING_TEMP_140 140000
91
92enum device_id {
93 MAX8973,
94 MAX77621
95};
96
97/* Maxim 8973 chip information */
98struct max8973_chip {
99 struct device *dev;
100 struct regulator_desc desc;
101 struct regmap *regmap;
102 bool enable_external_control;
103 struct gpio_desc *dvs_gpiod;
104 int lru_index[MAX8973_MAX_VOUT_REG];
105 int curr_vout_val[MAX8973_MAX_VOUT_REG];
106 int curr_vout_reg;
107 int curr_gpio_val;
108 struct regulator_ops ops;
109 enum device_id id;
110 int junction_temp_warning;
111 int irq;
112 struct thermal_zone_device *tz_device;
113};
114
115/*
116 * find_voltage_set_register: Find new voltage configuration register (VOUT).
117 * The finding of the new VOUT register will be based on the LRU mechanism.
118 * Each VOUT register will have different voltage configured . This
119 * Function will look if any of the VOUT register have requested voltage set
120 * or not.
121 * - If it is already there then it will make that register as most
122 * recently used and return as found so that caller need not to set
123 * the VOUT register but need to set the proper gpios to select this
124 * VOUT register.
125 * - If requested voltage is not found then it will use the least
126 * recently mechanism to get new VOUT register for new configuration
127 * and will return not_found so that caller need to set new VOUT
128 * register and then gpios (both).
129 */
130static bool find_voltage_set_register(struct max8973_chip *tps,
131 int req_vsel, int *vout_reg, int *gpio_val)
132{
133 int i;
134 bool found = false;
135 int new_vout_reg = tps->lru_index[MAX8973_MAX_VOUT_REG - 1];
136 int found_index = MAX8973_MAX_VOUT_REG - 1;
137
138 for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i) {
139 if (tps->curr_vout_val[tps->lru_index[i]] == req_vsel) {
140 new_vout_reg = tps->lru_index[i];
141 found_index = i;
142 found = true;
143 goto update_lru_index;
144 }
145 }
146
147update_lru_index:
148 for (i = found_index; i > 0; i--)
149 tps->lru_index[i] = tps->lru_index[i - 1];
150
151 tps->lru_index[0] = new_vout_reg;
152 *gpio_val = new_vout_reg;
153 *vout_reg = MAX8973_VOUT + new_vout_reg;
154 return found;
155}
156
157static int max8973_dcdc_get_voltage_sel(struct regulator_dev *rdev)
158{
159 struct max8973_chip *max = rdev_get_drvdata(rdev);
160 unsigned int data;
161 int ret;
162
163 ret = regmap_read(max->regmap, max->curr_vout_reg, &data);
164 if (ret < 0) {
165 dev_err(max->dev, "register %d read failed, err = %d\n",
166 max->curr_vout_reg, ret);
167 return ret;
168 }
169 return data & MAX8973_VOUT_MASK;
170}
171
172static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
173 unsigned vsel)
174{
175 struct max8973_chip *max = rdev_get_drvdata(rdev);
176 int ret;
177 bool found = false;
178 int vout_reg = max->curr_vout_reg;
179 int gpio_val = max->curr_gpio_val;
180
181 /*
182 * If gpios are available to select the VOUT register then least
183 * recently used register for new configuration.
184 */
185 if (max->dvs_gpiod)
186 found = find_voltage_set_register(max, vsel,
187 &vout_reg, &gpio_val);
188
189 if (!found) {
190 ret = regmap_update_bits(max->regmap, vout_reg,
191 MAX8973_VOUT_MASK, vsel);
192 if (ret < 0) {
193 dev_err(max->dev, "register %d update failed, err %d\n",
194 vout_reg, ret);
195 return ret;
196 }
197 max->curr_vout_reg = vout_reg;
198 max->curr_vout_val[gpio_val] = vsel;
199 }
200
201 /* Select proper VOUT register vio gpios */
202 if (max->dvs_gpiod) {
203 gpiod_set_value_cansleep(max->dvs_gpiod, gpio_val & 0x1);
204 max->curr_gpio_val = gpio_val;
205 }
206 return 0;
207}
208
209static int max8973_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
210{
211 struct max8973_chip *max = rdev_get_drvdata(rdev);
212 int ret;
213 int pwm;
214
215 /* Enable force PWM mode in FAST mode only. */
216 switch (mode) {
217 case REGULATOR_MODE_FAST:
218 pwm = MAX8973_FPWM_EN_M;
219 break;
220
221 case REGULATOR_MODE_NORMAL:
222 pwm = 0;
223 break;
224
225 default:
226 return -EINVAL;
227 }
228
229 ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1,
230 MAX8973_FPWM_EN_M, pwm);
231 if (ret < 0)
232 dev_err(max->dev, "register %d update failed, err %d\n",
233 MAX8973_CONTROL1, ret);
234 return ret;
235}
236
237static unsigned int max8973_dcdc_get_mode(struct regulator_dev *rdev)
238{
239 struct max8973_chip *max = rdev_get_drvdata(rdev);
240 unsigned int data;
241 int ret;
242
243 ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data);
244 if (ret < 0) {
245 dev_err(max->dev, "register %d read failed, err %d\n",
246 MAX8973_CONTROL1, ret);
247 return ret;
248 }
249 return (data & MAX8973_FPWM_EN_M) ?
250 REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
251}
252
253static int max8973_set_current_limit(struct regulator_dev *rdev,
254 int min_ua, int max_ua)
255{
256 struct max8973_chip *max = rdev_get_drvdata(rdev);
257 unsigned int val;
258 int ret;
259
260 if (max_ua <= 9000000)
261 val = MAX8973_CKKADV_TRIP_75mV_PER_US;
262 else if (max_ua <= 12000000)
263 val = MAX8973_CKKADV_TRIP_150mV_PER_US;
264 else
265 val = MAX8973_CKKADV_TRIP_DISABLE;
266
267 ret = regmap_update_bits(max->regmap, MAX8973_CONTROL2,
268 MAX8973_CKKADV_TRIP_MASK, val);
269 if (ret < 0) {
270 dev_err(max->dev, "register %d update failed: %d\n",
271 MAX8973_CONTROL2, ret);
272 return ret;
273 }
274 return 0;
275}
276
277static int max8973_get_current_limit(struct regulator_dev *rdev)
278{
279 struct max8973_chip *max = rdev_get_drvdata(rdev);
280 unsigned int control2;
281 int ret;
282
283 ret = regmap_read(max->regmap, MAX8973_CONTROL2, &control2);
284 if (ret < 0) {
285 dev_err(max->dev, "register %d read failed: %d\n",
286 MAX8973_CONTROL2, ret);
287 return ret;
288 }
289 switch (control2 & MAX8973_CKKADV_TRIP_MASK) {
290 case MAX8973_CKKADV_TRIP_DISABLE:
291 return 15000000;
292 case MAX8973_CKKADV_TRIP_150mV_PER_US:
293 return 12000000;
294 case MAX8973_CKKADV_TRIP_75mV_PER_US:
295 return 9000000;
296 default:
297 break;
298 }
299 return 9000000;
300}
301
302static const unsigned int max8973_buck_ramp_table[] = {
303 12000, 25000, 50000, 200000
304};
305
306static const struct regulator_ops max8973_dcdc_ops = {
307 .get_voltage_sel = max8973_dcdc_get_voltage_sel,
308 .set_voltage_sel = max8973_dcdc_set_voltage_sel,
309 .list_voltage = regulator_list_voltage_linear,
310 .set_mode = max8973_dcdc_set_mode,
311 .get_mode = max8973_dcdc_get_mode,
312 .set_voltage_time_sel = regulator_set_voltage_time_sel,
313 .set_ramp_delay = regulator_set_ramp_delay_regmap,
314};
315
316static int max8973_init_dcdc(struct max8973_chip *max,
317 struct max8973_regulator_platform_data *pdata)
318{
319 int ret;
320 uint8_t control1 = 0;
321 uint8_t control2 = 0;
322 unsigned int data;
323
324 ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data);
325 if (ret < 0) {
326 dev_err(max->dev, "register %d read failed, err = %d",
327 MAX8973_CONTROL1, ret);
328 return ret;
329 }
330 control1 = data & MAX8973_RAMP_MASK;
331 switch (control1) {
332 case MAX8973_RAMP_12mV_PER_US:
333 max->desc.ramp_delay = 12000;
334 break;
335 case MAX8973_RAMP_25mV_PER_US:
336 max->desc.ramp_delay = 25000;
337 break;
338 case MAX8973_RAMP_50mV_PER_US:
339 max->desc.ramp_delay = 50000;
340 break;
341 case MAX8973_RAMP_200mV_PER_US:
342 max->desc.ramp_delay = 200000;
343 break;
344 }
345
346 if (pdata->control_flags & MAX8973_CONTROL_REMOTE_SENSE_ENABLE)
347 control1 |= MAX8973_SNS_ENABLE;
348
349 if (!(pdata->control_flags & MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE))
350 control1 |= MAX8973_NFSR_ENABLE;
351
352 if (pdata->control_flags & MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE)
353 control1 |= MAX8973_AD_ENABLE;
354
355 if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE) {
356 control1 |= MAX8973_BIAS_ENABLE;
357 max->desc.enable_time = 20;
358 } else {
359 max->desc.enable_time = 240;
360 }
361
362 if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE)
363 control1 |= MAX8973_FREQSHIFT_9PER;
364
365 if ((pdata->junction_temp_warning == MAX77621_TJINT_WARNING_TEMP_120) &&
366 (max->id == MAX77621))
367 control2 |= MAX77621_T_JUNCTION_120;
368
369 if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE))
370 control2 |= MAX8973_DISCH_ENBABLE;
371
372 /* Clock advance trip configuration */
373 switch (pdata->control_flags & MAX8973_CONTROL_CLKADV_TRIP_MASK) {
374 case MAX8973_CONTROL_CLKADV_TRIP_DISABLED:
375 control2 |= MAX8973_CKKADV_TRIP_DISABLE;
376 break;
377
378 case MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US:
379 control2 |= MAX8973_CKKADV_TRIP_75mV_PER_US;
380 break;
381
382 case MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US:
383 control2 |= MAX8973_CKKADV_TRIP_150mV_PER_US;
384 break;
385
386 case MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS:
387 control2 |= MAX8973_CKKADV_TRIP_75mV_PER_US_HIST_DIS;
388 break;
389 }
390
391 /* Configure inductor value */
392 switch (pdata->control_flags & MAX8973_CONTROL_INDUCTOR_VALUE_MASK) {
393 case MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL:
394 control2 |= MAX8973_INDUCTOR_NOMINAL;
395 break;
396
397 case MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER:
398 control2 |= MAX8973_INDUCTOR_MIN_30_PER;
399 break;
400
401 case MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER:
402 control2 |= MAX8973_INDUCTOR_PLUS_30_PER;
403 break;
404
405 case MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER:
406 control2 |= MAX8973_INDUCTOR_PLUS_60_PER;
407 break;
408 }
409
410 ret = regmap_write(max->regmap, MAX8973_CONTROL1, control1);
411 if (ret < 0) {
412 dev_err(max->dev, "register %d write failed, err = %d",
413 MAX8973_CONTROL1, ret);
414 return ret;
415 }
416
417 ret = regmap_write(max->regmap, MAX8973_CONTROL2, control2);
418 if (ret < 0) {
419 dev_err(max->dev, "register %d write failed, err = %d",
420 MAX8973_CONTROL2, ret);
421 return ret;
422 }
423
424 /* If external control is enabled then disable EN bit */
425 if (max->enable_external_control && (max->id == MAX8973)) {
426 ret = regmap_update_bits(max->regmap, MAX8973_VOUT,
427 MAX8973_VOUT_ENABLE, 0);
428 if (ret < 0)
429 dev_err(max->dev, "register %d update failed, err = %d",
430 MAX8973_VOUT, ret);
431 }
432 return ret;
433}
434
435static int max8973_thermal_read_temp(struct thermal_zone_device *tz, int *temp)
436{
437 struct max8973_chip *mchip = thermal_zone_device_priv(tz);
438 unsigned int val;
439 int ret;
440
441 ret = regmap_read(mchip->regmap, MAX8973_CHIPID1, &val);
442 if (ret < 0) {
443 dev_err(mchip->dev, "Failed to read register CHIPID1, %d", ret);
444 return ret;
445 }
446
447 /* +1 degC to trigger cool device */
448 if (val & MAX77621_CHIPID_TJINT_S)
449 *temp = mchip->junction_temp_warning + 1000;
450 else
451 *temp = MAX77621_NORMAL_OPERATING_TEMP;
452
453 return 0;
454}
455
456static irqreturn_t max8973_thermal_irq(int irq, void *data)
457{
458 struct max8973_chip *mchip = data;
459
460 thermal_zone_device_update(mchip->tz_device,
461 THERMAL_EVENT_UNSPECIFIED);
462
463 return IRQ_HANDLED;
464}
465
466static const struct thermal_zone_device_ops max77621_tz_ops = {
467 .get_temp = max8973_thermal_read_temp,
468};
469
470static int max8973_thermal_init(struct max8973_chip *mchip)
471{
472 struct thermal_zone_device *tzd;
473 struct irq_data *irq_data;
474 unsigned long irq_flags = 0;
475 int ret;
476
477 if (mchip->id != MAX77621)
478 return 0;
479
480 tzd = devm_thermal_of_zone_register(mchip->dev, 0, mchip,
481 &max77621_tz_ops);
482 if (IS_ERR(tzd)) {
483 ret = PTR_ERR(tzd);
484 dev_err(mchip->dev, "Failed to register thermal sensor: %d\n",
485 ret);
486 return ret;
487 }
488
489 if (mchip->irq <= 0)
490 return 0;
491
492 irq_data = irq_get_irq_data(mchip->irq);
493 if (irq_data)
494 irq_flags = irqd_get_trigger_type(irq_data);
495
496 ret = devm_request_threaded_irq(mchip->dev, mchip->irq, NULL,
497 max8973_thermal_irq,
498 IRQF_ONESHOT | IRQF_SHARED | irq_flags,
499 dev_name(mchip->dev), mchip);
500 if (ret < 0) {
501 dev_err(mchip->dev, "Failed to request irq %d, %d\n",
502 mchip->irq, ret);
503 return ret;
504 }
505
506 return 0;
507}
508
509static const struct regmap_config max8973_regmap_config = {
510 .reg_bits = 8,
511 .val_bits = 8,
512 .max_register = MAX8973_CHIPID2,
513 .cache_type = REGCACHE_RBTREE,
514};
515
516static struct max8973_regulator_platform_data *max8973_parse_dt(
517 struct device *dev)
518{
519 struct max8973_regulator_platform_data *pdata;
520 struct device_node *np = dev->of_node;
521 int ret;
522 u32 pval;
523 bool etr_enable;
524 bool etr_sensitivity_high;
525
526 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
527 if (!pdata)
528 return NULL;
529
530 pdata->enable_ext_control = of_property_read_bool(np,
531 "maxim,externally-enable");
532
533 ret = of_property_read_u32(np, "maxim,dvs-default-state", &pval);
534 if (!ret)
535 pdata->dvs_def_state = pval;
536
537 if (of_property_read_bool(np, "maxim,enable-remote-sense"))
538 pdata->control_flags |= MAX8973_CONTROL_REMOTE_SENSE_ENABLE;
539
540 if (of_property_read_bool(np, "maxim,enable-falling-slew-rate"))
541 pdata->control_flags |=
542 MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE;
543
544 if (of_property_read_bool(np, "maxim,enable-active-discharge"))
545 pdata->control_flags |=
546 MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE;
547
548 if (of_property_read_bool(np, "maxim,enable-frequency-shift"))
549 pdata->control_flags |= MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE;
550
551 if (of_property_read_bool(np, "maxim,enable-bias-control"))
552 pdata->control_flags |= MAX8973_CONTROL_BIAS_ENABLE;
553
554 etr_enable = of_property_read_bool(np, "maxim,enable-etr");
555 etr_sensitivity_high = of_property_read_bool(np,
556 "maxim,enable-high-etr-sensitivity");
557 if (etr_sensitivity_high)
558 etr_enable = true;
559
560 if (etr_enable) {
561 if (etr_sensitivity_high)
562 pdata->control_flags |=
563 MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US;
564 else
565 pdata->control_flags |=
566 MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US;
567 } else {
568 pdata->control_flags |= MAX8973_CONTROL_CLKADV_TRIP_DISABLED;
569 }
570
571 pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_140;
572 ret = of_property_read_u32(np, "junction-warn-millicelsius", &pval);
573 if (!ret && (pval <= MAX77621_TJINT_WARNING_TEMP_120))
574 pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_120;
575
576 return pdata;
577}
578
579static const struct of_device_id of_max8973_match_tbl[] = {
580 { .compatible = "maxim,max8973", .data = (void *)MAX8973, },
581 { .compatible = "maxim,max77621", .data = (void *)MAX77621, },
582 { },
583};
584MODULE_DEVICE_TABLE(of, of_max8973_match_tbl);
585
586static int max8973_probe(struct i2c_client *client)
587{
588 const struct i2c_device_id *id = i2c_client_get_device_id(client);
589 struct max8973_regulator_platform_data *pdata;
590 struct regulator_init_data *ridata;
591 struct regulator_config config = { };
592 struct regulator_dev *rdev;
593 struct max8973_chip *max;
594 bool pdata_from_dt = false;
595 unsigned int chip_id;
596 struct gpio_desc *gpiod;
597 enum gpiod_flags gflags;
598 int ret;
599
600 pdata = dev_get_platdata(&client->dev);
601
602 if (!pdata && client->dev.of_node) {
603 pdata = max8973_parse_dt(&client->dev);
604 pdata_from_dt = true;
605 }
606
607 if (!pdata) {
608 dev_err(&client->dev, "No Platform data");
609 return -EIO;
610 }
611
612 max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
613 if (!max)
614 return -ENOMEM;
615
616 max->dvs_gpiod = devm_gpiod_get_optional(&client->dev, "maxim,dvs",
617 (pdata->dvs_def_state) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
618 if (IS_ERR(max->dvs_gpiod))
619 return dev_err_probe(&client->dev, PTR_ERR(max->dvs_gpiod),
620 "failed to obtain dvs gpio\n");
621 gpiod_set_consumer_name(max->dvs_gpiod, "max8973-dvs");
622
623 max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config);
624 if (IS_ERR(max->regmap)) {
625 ret = PTR_ERR(max->regmap);
626 dev_err(&client->dev, "regmap init failed, err %d\n", ret);
627 return ret;
628 }
629
630 if (client->dev.of_node) {
631 const struct of_device_id *match;
632
633 match = of_match_device(of_match_ptr(of_max8973_match_tbl),
634 &client->dev);
635 if (!match)
636 return -ENODATA;
637 max->id = (u32)((uintptr_t)match->data);
638 } else {
639 max->id = id->driver_data;
640 }
641
642 ret = regmap_read(max->regmap, MAX8973_CHIPID1, &chip_id);
643 if (ret < 0) {
644 dev_err(&client->dev, "register CHIPID1 read failed, %d", ret);
645 return ret;
646 }
647
648 dev_info(&client->dev, "CHIP-ID OTP: 0x%02x ID_M: 0x%02x\n",
649 (chip_id >> 4) & 0xF, (chip_id >> 1) & 0x7);
650
651 i2c_set_clientdata(client, max);
652 max->ops = max8973_dcdc_ops;
653 max->dev = &client->dev;
654 max->desc.name = id->name;
655 max->desc.id = 0;
656 max->desc.ops = &max->ops;
657 max->desc.type = REGULATOR_VOLTAGE;
658 max->desc.owner = THIS_MODULE;
659 max->desc.min_uV = MAX8973_MIN_VOLATGE;
660 max->desc.uV_step = MAX8973_VOLATGE_STEP;
661 max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
662 max->desc.ramp_reg = MAX8973_CONTROL1;
663 max->desc.ramp_mask = MAX8973_RAMP_MASK;
664 max->desc.ramp_delay_table = max8973_buck_ramp_table;
665 max->desc.n_ramp_values = ARRAY_SIZE(max8973_buck_ramp_table);
666
667 max->enable_external_control = pdata->enable_ext_control;
668 max->curr_gpio_val = pdata->dvs_def_state;
669 max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
670 max->junction_temp_warning = pdata->junction_temp_warning;
671
672 max->lru_index[0] = max->curr_vout_reg;
673
674 if (max->dvs_gpiod) {
675 int i;
676
677 /*
678 * Initialize the lru index with vout_reg id
679 * The index 0 will be most recently used and
680 * set with the max->curr_vout_reg */
681 for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i)
682 max->lru_index[i] = i;
683 max->lru_index[0] = max->curr_vout_reg;
684 max->lru_index[max->curr_vout_reg] = 0;
685 } else {
686 /*
687 * If there is no DVS GPIO, the VOUT register
688 * address is fixed.
689 */
690 max->ops.set_voltage_sel = regulator_set_voltage_sel_regmap;
691 max->ops.get_voltage_sel = regulator_get_voltage_sel_regmap;
692 max->desc.vsel_reg = max->curr_vout_reg;
693 max->desc.vsel_mask = MAX8973_VOUT_MASK;
694 }
695
696 if (pdata_from_dt)
697 pdata->reg_init_data = of_get_regulator_init_data(&client->dev,
698 client->dev.of_node, &max->desc);
699
700 ridata = pdata->reg_init_data;
701 switch (max->id) {
702 case MAX8973:
703 if (!pdata->enable_ext_control) {
704 max->desc.enable_reg = MAX8973_VOUT;
705 max->desc.enable_mask = MAX8973_VOUT_ENABLE;
706 max->ops.enable = regulator_enable_regmap;
707 max->ops.disable = regulator_disable_regmap;
708 max->ops.is_enabled = regulator_is_enabled_regmap;
709 break;
710 }
711
712 if (ridata && (ridata->constraints.always_on ||
713 ridata->constraints.boot_on))
714 gflags = GPIOD_OUT_HIGH;
715 else
716 gflags = GPIOD_OUT_LOW;
717 gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
718 gpiod = devm_gpiod_get_optional(&client->dev,
719 "maxim,enable",
720 gflags);
721 if (IS_ERR(gpiod))
722 return PTR_ERR(gpiod);
723 if (gpiod) {
724 config.ena_gpiod = gpiod;
725 max->enable_external_control = true;
726 }
727
728 break;
729
730 case MAX77621:
731 /*
732 * We do not let the core switch this regulator on/off,
733 * we just leave it on.
734 */
735 gpiod = devm_gpiod_get_optional(&client->dev,
736 "maxim,enable",
737 GPIOD_OUT_HIGH);
738 if (IS_ERR(gpiod))
739 return PTR_ERR(gpiod);
740 if (gpiod)
741 max->enable_external_control = true;
742
743 max->desc.enable_reg = MAX8973_VOUT;
744 max->desc.enable_mask = MAX8973_VOUT_ENABLE;
745 max->ops.enable = regulator_enable_regmap;
746 max->ops.disable = regulator_disable_regmap;
747 max->ops.is_enabled = regulator_is_enabled_regmap;
748 max->ops.set_current_limit = max8973_set_current_limit;
749 max->ops.get_current_limit = max8973_get_current_limit;
750 break;
751 default:
752 break;
753 }
754
755 ret = max8973_init_dcdc(max, pdata);
756 if (ret < 0) {
757 dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
758 return ret;
759 }
760
761 config.dev = &client->dev;
762 config.init_data = pdata->reg_init_data;
763 config.driver_data = max;
764 config.of_node = client->dev.of_node;
765 config.regmap = max->regmap;
766
767 /*
768 * Register the regulators
769 * Turn the GPIO descriptor over to the regulator core for
770 * lifecycle management if we pass an ena_gpiod.
771 */
772 if (config.ena_gpiod)
773 devm_gpiod_unhinge(&client->dev, config.ena_gpiod);
774 rdev = devm_regulator_register(&client->dev, &max->desc, &config);
775 if (IS_ERR(rdev)) {
776 ret = PTR_ERR(rdev);
777 dev_err(max->dev, "regulator register failed, err %d\n", ret);
778 return ret;
779 }
780
781 max8973_thermal_init(max);
782 return 0;
783}
784
785static const struct i2c_device_id max8973_id[] = {
786 {.name = "max8973", .driver_data = MAX8973},
787 {.name = "max77621", .driver_data = MAX77621},
788 {},
789};
790MODULE_DEVICE_TABLE(i2c, max8973_id);
791
792static struct i2c_driver max8973_i2c_driver = {
793 .driver = {
794 .name = "max8973",
795 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
796 .of_match_table = of_max8973_match_tbl,
797 },
798 .probe = max8973_probe,
799 .id_table = max8973_id,
800};
801
802static int __init max8973_init(void)
803{
804 return i2c_add_driver(&max8973_i2c_driver);
805}
806subsys_initcall(max8973_init);
807
808static void __exit max8973_cleanup(void)
809{
810 i2c_del_driver(&max8973_i2c_driver);
811}
812module_exit(max8973_cleanup);
813
814MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
815MODULE_DESCRIPTION("MAX8973 voltage regulator driver");
816MODULE_LICENSE("GPL v2");