Loading...
1/*
2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. INET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
5 *
6 * Holds initial configuration information for devices.
7 *
8 * Version: @(#)Space.c 1.0.7 08/12/93
9 *
10 * Authors: Ross Biro
11 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
12 * Donald J. Becker, <becker@scyld.com>
13 *
14 * Changelog:
15 * Stephen Hemminger (09/2003)
16 * - get rid of pre-linked dev list, dynamic device allocation
17 * Paul Gortmaker (03/2002)
18 * - struct init cleanup, enable multiple ISA autoprobes.
19 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999
20 * - fix sbni: s/device/net_device/
21 * Paul Gortmaker (06/98):
22 * - sort probes in a sane way, make sure all (safe) probes
23 * get run once & failed autoprobes don't autoprobe again.
24 *
25 * This program is free software; you can redistribute it and/or
26 * modify it under the terms of the GNU General Public License
27 * as published by the Free Software Foundation; either version
28 * 2 of the License, or (at your option) any later version.
29 */
30#include <linux/netdevice.h>
31#include <linux/etherdevice.h>
32#include <linux/trdevice.h>
33#include <linux/errno.h>
34#include <linux/init.h>
35#include <linux/netlink.h>
36
37/* A unified ethernet device probe. This is the easiest way to have every
38 ethernet adaptor have the name "eth[0123...]".
39 */
40
41extern struct net_device *ne2_probe(int unit);
42extern struct net_device *hp100_probe(int unit);
43extern struct net_device *ultra_probe(int unit);
44extern struct net_device *ultra32_probe(int unit);
45extern struct net_device *wd_probe(int unit);
46extern struct net_device *el2_probe(int unit);
47extern struct net_device *ne_probe(int unit);
48extern struct net_device *hp_probe(int unit);
49extern struct net_device *hp_plus_probe(int unit);
50extern struct net_device *express_probe(int unit);
51extern struct net_device *eepro_probe(int unit);
52extern struct net_device *at1700_probe(int unit);
53extern struct net_device *fmv18x_probe(int unit);
54extern struct net_device *eth16i_probe(int unit);
55extern struct net_device *i82596_probe(int unit);
56extern struct net_device *ewrk3_probe(int unit);
57extern struct net_device *el1_probe(int unit);
58extern struct net_device *el16_probe(int unit);
59extern struct net_device *elmc_probe(int unit);
60extern struct net_device *elplus_probe(int unit);
61extern struct net_device *ac3200_probe(int unit);
62extern struct net_device *es_probe(int unit);
63extern struct net_device *lne390_probe(int unit);
64extern struct net_device *e2100_probe(int unit);
65extern struct net_device *ni5010_probe(int unit);
66extern struct net_device *ni52_probe(int unit);
67extern struct net_device *ni65_probe(int unit);
68extern struct net_device *sonic_probe(int unit);
69extern struct net_device *seeq8005_probe(int unit);
70extern struct net_device *smc_init(int unit);
71extern struct net_device *atarilance_probe(int unit);
72extern struct net_device *sun3lance_probe(int unit);
73extern struct net_device *sun3_82586_probe(int unit);
74extern struct net_device *apne_probe(int unit);
75extern struct net_device *cs89x0_probe(int unit);
76extern struct net_device *mvme147lance_probe(int unit);
77extern struct net_device *tc515_probe(int unit);
78extern struct net_device *lance_probe(int unit);
79extern struct net_device *mac8390_probe(int unit);
80extern struct net_device *mac89x0_probe(int unit);
81extern struct net_device *mc32_probe(int unit);
82extern struct net_device *cops_probe(int unit);
83extern struct net_device *ltpc_probe(void);
84
85/* Detachable devices ("pocket adaptors") */
86extern struct net_device *de620_probe(int unit);
87
88/* Fibre Channel adapters */
89extern int iph5526_probe(struct net_device *dev);
90
91/* SBNI adapters */
92extern int sbni_probe(int unit);
93
94struct devprobe2 {
95 struct net_device *(*probe)(int unit);
96 int status; /* non-zero if autoprobe has failed */
97};
98
99static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
100{
101 struct net_device *dev;
102 for (; p->probe; p++) {
103 if (autoprobe && p->status)
104 continue;
105 dev = p->probe(unit);
106 if (!IS_ERR(dev))
107 return 0;
108 if (autoprobe)
109 p->status = PTR_ERR(dev);
110 }
111 return -ENODEV;
112}
113
114/*
115 * This is a bit of an artificial separation as there are PCI drivers
116 * that also probe for EISA cards (in the PCI group) and there are ISA
117 * drivers that probe for EISA cards (in the ISA group). These are the
118 * legacy EISA only driver probes, and also the legacy PCI probes
119 */
120
121static struct devprobe2 eisa_probes[] __initdata = {
122#ifdef CONFIG_ULTRA32
123 {ultra32_probe, 0},
124#endif
125#ifdef CONFIG_AC3200
126 {ac3200_probe, 0},
127#endif
128#ifdef CONFIG_ES3210
129 {es_probe, 0},
130#endif
131#ifdef CONFIG_LNE390
132 {lne390_probe, 0},
133#endif
134 {NULL, 0},
135};
136
137static struct devprobe2 mca_probes[] __initdata = {
138#ifdef CONFIG_NE2_MCA
139 {ne2_probe, 0},
140#endif
141#ifdef CONFIG_ELMC /* 3c523 */
142 {elmc_probe, 0},
143#endif
144#ifdef CONFIG_ELMC_II /* 3c527 */
145 {mc32_probe, 0},
146#endif
147 {NULL, 0},
148};
149
150/*
151 * ISA probes that touch addresses < 0x400 (including those that also
152 * look for EISA/PCI/MCA cards in addition to ISA cards).
153 */
154static struct devprobe2 isa_probes[] __initdata = {
155#if defined(CONFIG_HP100) && defined(CONFIG_ISA) /* ISA, EISA */
156 {hp100_probe, 0},
157#endif
158#ifdef CONFIG_3C515
159 {tc515_probe, 0},
160#endif
161#ifdef CONFIG_ULTRA
162 {ultra_probe, 0},
163#endif
164#ifdef CONFIG_WD80x3
165 {wd_probe, 0},
166#endif
167#ifdef CONFIG_EL2 /* 3c503 */
168 {el2_probe, 0},
169#endif
170#ifdef CONFIG_HPLAN
171 {hp_probe, 0},
172#endif
173#ifdef CONFIG_HPLAN_PLUS
174 {hp_plus_probe, 0},
175#endif
176#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
177 {e2100_probe, 0},
178#endif
179#if defined(CONFIG_NE2000) || \
180 defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
181 {ne_probe, 0},
182#endif
183#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
184 {lance_probe, 0},
185#endif
186#ifdef CONFIG_SMC9194
187 {smc_init, 0},
188#endif
189#ifdef CONFIG_SEEQ8005
190 {seeq8005_probe, 0},
191#endif
192#ifdef CONFIG_CS89x0
193 {cs89x0_probe, 0},
194#endif
195#ifdef CONFIG_AT1700
196 {at1700_probe, 0},
197#endif
198#ifdef CONFIG_ETH16I
199 {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */
200#endif
201#ifdef CONFIG_EEXPRESS /* Intel EtherExpress */
202 {express_probe, 0},
203#endif
204#ifdef CONFIG_EEXPRESS_PRO /* Intel EtherExpress Pro/10 */
205 {eepro_probe, 0},
206#endif
207#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */
208 {ewrk3_probe, 0},
209#endif
210#if defined(CONFIG_APRICOT) || defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */
211 {i82596_probe, 0},
212#endif
213#ifdef CONFIG_EL1 /* 3c501 */
214 {el1_probe, 0},
215#endif
216#ifdef CONFIG_EL16 /* 3c507 */
217 {el16_probe, 0},
218#endif
219#ifdef CONFIG_ELPLUS /* 3c505 */
220 {elplus_probe, 0},
221#endif
222#ifdef CONFIG_NI5010
223 {ni5010_probe, 0},
224#endif
225#ifdef CONFIG_NI52
226 {ni52_probe, 0},
227#endif
228#ifdef CONFIG_NI65
229 {ni65_probe, 0},
230#endif
231 {NULL, 0},
232};
233
234static struct devprobe2 parport_probes[] __initdata = {
235#ifdef CONFIG_DE620 /* D-Link DE-620 adapter */
236 {de620_probe, 0},
237#endif
238 {NULL, 0},
239};
240
241static struct devprobe2 m68k_probes[] __initdata = {
242#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
243 {atarilance_probe, 0},
244#endif
245#ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */
246 {sun3lance_probe, 0},
247#endif
248#ifdef CONFIG_SUN3_82586 /* sun3 onboard Intel 82586 chip */
249 {sun3_82586_probe, 0},
250#endif
251#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
252 {apne_probe, 0},
253#endif
254#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
255 {mvme147lance_probe, 0},
256#endif
257#ifdef CONFIG_MAC8390 /* NuBus NS8390-based cards */
258 {mac8390_probe, 0},
259#endif
260#ifdef CONFIG_MAC89x0
261 {mac89x0_probe, 0},
262#endif
263 {NULL, 0},
264};
265
266/*
267 * Unified ethernet device probe, segmented per architecture and
268 * per bus interface. This drives the legacy devices only for now.
269 */
270
271static void __init ethif_probe2(int unit)
272{
273 unsigned long base_addr = netdev_boot_base("eth", unit);
274
275 if (base_addr == 1)
276 return;
277
278 (void)( probe_list2(unit, m68k_probes, base_addr == 0) &&
279 probe_list2(unit, eisa_probes, base_addr == 0) &&
280 probe_list2(unit, mca_probes, base_addr == 0) &&
281 probe_list2(unit, isa_probes, base_addr == 0) &&
282 probe_list2(unit, parport_probes, base_addr == 0));
283}
284
285#ifdef CONFIG_TR
286/* Token-ring device probe */
287extern int ibmtr_probe_card(struct net_device *);
288extern struct net_device *smctr_probe(int unit);
289
290static struct devprobe2 tr_probes2[] __initdata = {
291#ifdef CONFIG_SMCTR
292 {smctr_probe, 0},
293#endif
294 {NULL, 0},
295};
296
297static __init int trif_probe(int unit)
298{
299 int err = -ENODEV;
300#ifdef CONFIG_IBMTR
301 struct net_device *dev = alloc_trdev(0);
302 if (!dev)
303 return -ENOMEM;
304
305 sprintf(dev->name, "tr%d", unit);
306 netdev_boot_setup_check(dev);
307 err = ibmtr_probe_card(dev);
308 if (err)
309 free_netdev(dev);
310#endif
311 return err;
312}
313
314static void __init trif_probe2(int unit)
315{
316 unsigned long base_addr = netdev_boot_base("tr", unit);
317
318 if (base_addr == 1)
319 return;
320 probe_list2(unit, tr_probes2, base_addr == 0);
321}
322#endif
323
324
325/* Statically configured drivers -- order matters here. */
326static int __init net_olddevs_init(void)
327{
328 int num;
329
330#ifdef CONFIG_SBNI
331 for (num = 0; num < 8; ++num)
332 sbni_probe(num);
333#endif
334#ifdef CONFIG_TR
335 for (num = 0; num < 8; ++num)
336 if (!trif_probe(num))
337 trif_probe2(num);
338#endif
339 for (num = 0; num < 8; ++num)
340 ethif_probe2(num);
341
342#ifdef CONFIG_COPS
343 cops_probe(0);
344 cops_probe(1);
345 cops_probe(2);
346#endif
347#ifdef CONFIG_LTPC
348 ltpc_probe();
349#endif
350
351 return 0;
352}
353
354device_initcall(net_olddevs_init);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * INET An implementation of the TCP/IP protocol suite for the LINUX
4 * operating system. INET is implemented using the BSD Socket
5 * interface as the means of communication with the user level.
6 *
7 * Holds initial configuration information for devices.
8 *
9 * Version: @(#)Space.c 1.0.7 08/12/93
10 *
11 * Authors: Ross Biro
12 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
13 * Donald J. Becker, <becker@scyld.com>
14 *
15 * Changelog:
16 * Stephen Hemminger (09/2003)
17 * - get rid of pre-linked dev list, dynamic device allocation
18 * Paul Gortmaker (03/2002)
19 * - struct init cleanup, enable multiple ISA autoprobes.
20 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999
21 * - fix sbni: s/device/net_device/
22 * Paul Gortmaker (06/98):
23 * - sort probes in a sane way, make sure all (safe) probes
24 * get run once & failed autoprobes don't autoprobe again.
25 */
26#include <linux/netdevice.h>
27#include <linux/etherdevice.h>
28#include <linux/errno.h>
29#include <linux/init.h>
30#include <linux/netlink.h>
31#include <net/Space.h>
32
33/*
34 * This structure holds boot-time configured netdevice settings. They
35 * are then used in the device probing.
36 */
37struct netdev_boot_setup {
38 char name[IFNAMSIZ];
39 struct ifmap map;
40};
41#define NETDEV_BOOT_SETUP_MAX 8
42
43
44/******************************************************************************
45 *
46 * Device Boot-time Settings Routines
47 *
48 ******************************************************************************/
49
50/* Boot time configuration table */
51static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX];
52
53/**
54 * netdev_boot_setup_add - add new setup entry
55 * @name: name of the device
56 * @map: configured settings for the device
57 *
58 * Adds new setup entry to the dev_boot_setup list. The function
59 * returns 0 on error and 1 on success. This is a generic routine to
60 * all netdevices.
61 */
62static int netdev_boot_setup_add(char *name, struct ifmap *map)
63{
64 struct netdev_boot_setup *s;
65 int i;
66
67 s = dev_boot_setup;
68 for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
69 if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
70 memset(s[i].name, 0, sizeof(s[i].name));
71 strscpy(s[i].name, name, IFNAMSIZ);
72 memcpy(&s[i].map, map, sizeof(s[i].map));
73 break;
74 }
75 }
76
77 return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1;
78}
79
80/**
81 * netdev_boot_setup_check - check boot time settings
82 * @dev: the netdevice
83 *
84 * Check boot time settings for the device.
85 * The found settings are set for the device to be used
86 * later in the device probing.
87 * Returns 0 if no settings found, 1 if they are.
88 */
89int netdev_boot_setup_check(struct net_device *dev)
90{
91 struct netdev_boot_setup *s = dev_boot_setup;
92 int i;
93
94 for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
95 if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
96 !strcmp(dev->name, s[i].name)) {
97 dev->irq = s[i].map.irq;
98 dev->base_addr = s[i].map.base_addr;
99 dev->mem_start = s[i].map.mem_start;
100 dev->mem_end = s[i].map.mem_end;
101 return 1;
102 }
103 }
104 return 0;
105}
106EXPORT_SYMBOL(netdev_boot_setup_check);
107
108/**
109 * netdev_boot_base - get address from boot time settings
110 * @prefix: prefix for network device
111 * @unit: id for network device
112 *
113 * Check boot time settings for the base address of device.
114 * The found settings are set for the device to be used
115 * later in the device probing.
116 * Returns 0 if no settings found.
117 */
118static unsigned long netdev_boot_base(const char *prefix, int unit)
119{
120 const struct netdev_boot_setup *s = dev_boot_setup;
121 char name[IFNAMSIZ];
122 int i;
123
124 sprintf(name, "%s%d", prefix, unit);
125
126 /*
127 * If device already registered then return base of 1
128 * to indicate not to probe for this interface
129 */
130 if (__dev_get_by_name(&init_net, name))
131 return 1;
132
133 for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++)
134 if (!strcmp(name, s[i].name))
135 return s[i].map.base_addr;
136 return 0;
137}
138
139/*
140 * Saves at boot time configured settings for any netdevice.
141 */
142static int __init netdev_boot_setup(char *str)
143{
144 int ints[5];
145 struct ifmap map;
146
147 str = get_options(str, ARRAY_SIZE(ints), ints);
148 if (!str || !*str)
149 return 0;
150
151 /* Save settings */
152 memset(&map, 0, sizeof(map));
153 if (ints[0] > 0)
154 map.irq = ints[1];
155 if (ints[0] > 1)
156 map.base_addr = ints[2];
157 if (ints[0] > 2)
158 map.mem_start = ints[3];
159 if (ints[0] > 3)
160 map.mem_end = ints[4];
161
162 /* Add new entry to the list */
163 return netdev_boot_setup_add(str, &map);
164}
165
166__setup("netdev=", netdev_boot_setup);
167
168static int __init ether_boot_setup(char *str)
169{
170 return netdev_boot_setup(str);
171}
172__setup("ether=", ether_boot_setup);
173
174
175/* A unified ethernet device probe. This is the easiest way to have every
176 * ethernet adaptor have the name "eth[0123...]".
177 */
178
179struct devprobe2 {
180 struct net_device *(*probe)(int unit);
181 int status; /* non-zero if autoprobe has failed */
182};
183
184static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
185{
186 struct net_device *dev;
187
188 for (; p->probe; p++) {
189 if (autoprobe && p->status)
190 continue;
191 dev = p->probe(unit);
192 if (!IS_ERR(dev))
193 return 0;
194 if (autoprobe)
195 p->status = PTR_ERR(dev);
196 }
197 return -ENODEV;
198}
199
200/* ISA probes that touch addresses < 0x400 (including those that also
201 * look for EISA/PCI cards in addition to ISA cards).
202 */
203static struct devprobe2 isa_probes[] __initdata = {
204#ifdef CONFIG_3C515
205 {tc515_probe, 0},
206#endif
207#ifdef CONFIG_ULTRA
208 {ultra_probe, 0},
209#endif
210#ifdef CONFIG_WD80x3
211 {wd_probe, 0},
212#endif
213#if defined(CONFIG_NE2000) /* ISA (use ne2k-pci for PCI cards) */
214 {ne_probe, 0},
215#endif
216#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
217 {lance_probe, 0},
218#endif
219#ifdef CONFIG_SMC9194
220 {smc_init, 0},
221#endif
222#ifdef CONFIG_CS89x0_ISA
223 {cs89x0_probe, 0},
224#endif
225 {NULL, 0},
226};
227
228/* Unified ethernet device probe, segmented per architecture and
229 * per bus interface. This drives the legacy devices only for now.
230 */
231
232static void __init ethif_probe2(int unit)
233{
234 unsigned long base_addr = netdev_boot_base("eth", unit);
235
236 if (base_addr == 1)
237 return;
238
239 probe_list2(unit, isa_probes, base_addr == 0);
240}
241
242/* Statically configured drivers -- order matters here. */
243static int __init net_olddevs_init(void)
244{
245 int num;
246
247 for (num = 0; num < 8; ++num)
248 ethif_probe2(num);
249
250 return 0;
251}
252
253device_initcall(net_olddevs_init);