Loading...
1/*
2 * drivers/base/dd.c - The core device/driver interactions.
3 *
4 * This file contains the (sometimes tricky) code that controls the
5 * interactions between devices and drivers, which primarily includes
6 * driver binding and unbinding.
7 *
8 * All of this code used to exist in drivers/base/bus.c, but was
9 * relocated to here in the name of compartmentalization (since it wasn't
10 * strictly code just for the 'struct bus_type'.
11 *
12 * Copyright (c) 2002-5 Patrick Mochel
13 * Copyright (c) 2002-3 Open Source Development Labs
14 * Copyright (c) 2007-2009 Greg Kroah-Hartman <gregkh@suse.de>
15 * Copyright (c) 2007-2009 Novell Inc.
16 *
17 * This file is released under the GPLv2
18 */
19
20#include <linux/device.h>
21#include <linux/delay.h>
22#include <linux/module.h>
23#include <linux/kthread.h>
24#include <linux/wait.h>
25#include <linux/async.h>
26#include <linux/pm_runtime.h>
27
28#include "base.h"
29#include "power/power.h"
30
31
32static void driver_bound(struct device *dev)
33{
34 if (klist_node_attached(&dev->p->knode_driver)) {
35 printk(KERN_WARNING "%s: device %s already bound\n",
36 __func__, kobject_name(&dev->kobj));
37 return;
38 }
39
40 pr_debug("driver: '%s': %s: bound to device '%s'\n", dev_name(dev),
41 __func__, dev->driver->name);
42
43 klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices);
44
45 if (dev->bus)
46 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
47 BUS_NOTIFY_BOUND_DRIVER, dev);
48}
49
50static int driver_sysfs_add(struct device *dev)
51{
52 int ret;
53
54 if (dev->bus)
55 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
56 BUS_NOTIFY_BIND_DRIVER, dev);
57
58 ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj,
59 kobject_name(&dev->kobj));
60 if (ret == 0) {
61 ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj,
62 "driver");
63 if (ret)
64 sysfs_remove_link(&dev->driver->p->kobj,
65 kobject_name(&dev->kobj));
66 }
67 return ret;
68}
69
70static void driver_sysfs_remove(struct device *dev)
71{
72 struct device_driver *drv = dev->driver;
73
74 if (drv) {
75 sysfs_remove_link(&drv->p->kobj, kobject_name(&dev->kobj));
76 sysfs_remove_link(&dev->kobj, "driver");
77 }
78}
79
80/**
81 * device_bind_driver - bind a driver to one device.
82 * @dev: device.
83 *
84 * Allow manual attachment of a driver to a device.
85 * Caller must have already set @dev->driver.
86 *
87 * Note that this does not modify the bus reference count
88 * nor take the bus's rwsem. Please verify those are accounted
89 * for before calling this. (It is ok to call with no other effort
90 * from a driver's probe() method.)
91 *
92 * This function must be called with the device lock held.
93 */
94int device_bind_driver(struct device *dev)
95{
96 int ret;
97
98 ret = driver_sysfs_add(dev);
99 if (!ret)
100 driver_bound(dev);
101 return ret;
102}
103EXPORT_SYMBOL_GPL(device_bind_driver);
104
105static atomic_t probe_count = ATOMIC_INIT(0);
106static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue);
107
108static int really_probe(struct device *dev, struct device_driver *drv)
109{
110 int ret = 0;
111
112 atomic_inc(&probe_count);
113 pr_debug("bus: '%s': %s: probing driver %s with device %s\n",
114 drv->bus->name, __func__, drv->name, dev_name(dev));
115 WARN_ON(!list_empty(&dev->devres_head));
116
117 dev->driver = drv;
118 if (driver_sysfs_add(dev)) {
119 printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
120 __func__, dev_name(dev));
121 goto probe_failed;
122 }
123
124 if (dev->bus->probe) {
125 ret = dev->bus->probe(dev);
126 if (ret)
127 goto probe_failed;
128 } else if (drv->probe) {
129 ret = drv->probe(dev);
130 if (ret)
131 goto probe_failed;
132 }
133
134 driver_bound(dev);
135 ret = 1;
136 pr_debug("bus: '%s': %s: bound device %s to driver %s\n",
137 drv->bus->name, __func__, dev_name(dev), drv->name);
138 goto done;
139
140probe_failed:
141 devres_release_all(dev);
142 driver_sysfs_remove(dev);
143 dev->driver = NULL;
144
145 if (ret != -ENODEV && ret != -ENXIO) {
146 /* driver matched but the probe failed */
147 printk(KERN_WARNING
148 "%s: probe of %s failed with error %d\n",
149 drv->name, dev_name(dev), ret);
150 }
151 /*
152 * Ignore errors returned by ->probe so that the next driver can try
153 * its luck.
154 */
155 ret = 0;
156done:
157 atomic_dec(&probe_count);
158 wake_up(&probe_waitqueue);
159 return ret;
160}
161
162/**
163 * driver_probe_done
164 * Determine if the probe sequence is finished or not.
165 *
166 * Should somehow figure out how to use a semaphore, not an atomic variable...
167 */
168int driver_probe_done(void)
169{
170 pr_debug("%s: probe_count = %d\n", __func__,
171 atomic_read(&probe_count));
172 if (atomic_read(&probe_count))
173 return -EBUSY;
174 return 0;
175}
176
177/**
178 * wait_for_device_probe
179 * Wait for device probing to be completed.
180 */
181void wait_for_device_probe(void)
182{
183 /* wait for the known devices to complete their probing */
184 wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
185 async_synchronize_full();
186}
187EXPORT_SYMBOL_GPL(wait_for_device_probe);
188
189/**
190 * driver_probe_device - attempt to bind device & driver together
191 * @drv: driver to bind a device to
192 * @dev: device to try to bind to the driver
193 *
194 * This function returns -ENODEV if the device is not registered,
195 * 1 if the device is bound successfully and 0 otherwise.
196 *
197 * This function must be called with @dev lock held. When called for a
198 * USB interface, @dev->parent lock must be held as well.
199 */
200int driver_probe_device(struct device_driver *drv, struct device *dev)
201{
202 int ret = 0;
203
204 if (!device_is_registered(dev))
205 return -ENODEV;
206
207 pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
208 drv->bus->name, __func__, dev_name(dev), drv->name);
209
210 pm_runtime_get_noresume(dev);
211 pm_runtime_barrier(dev);
212 ret = really_probe(dev, drv);
213 pm_runtime_put_sync(dev);
214
215 return ret;
216}
217
218static int __device_attach(struct device_driver *drv, void *data)
219{
220 struct device *dev = data;
221
222 if (!driver_match_device(drv, dev))
223 return 0;
224
225 return driver_probe_device(drv, dev);
226}
227
228/**
229 * device_attach - try to attach device to a driver.
230 * @dev: device.
231 *
232 * Walk the list of drivers that the bus has and call
233 * driver_probe_device() for each pair. If a compatible
234 * pair is found, break out and return.
235 *
236 * Returns 1 if the device was bound to a driver;
237 * 0 if no matching driver was found;
238 * -ENODEV if the device is not registered.
239 *
240 * When called for a USB interface, @dev->parent lock must be held.
241 */
242int device_attach(struct device *dev)
243{
244 int ret = 0;
245
246 device_lock(dev);
247 if (dev->driver) {
248 if (klist_node_attached(&dev->p->knode_driver)) {
249 ret = 1;
250 goto out_unlock;
251 }
252 ret = device_bind_driver(dev);
253 if (ret == 0)
254 ret = 1;
255 else {
256 dev->driver = NULL;
257 ret = 0;
258 }
259 } else {
260 pm_runtime_get_noresume(dev);
261 ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
262 pm_runtime_put_sync(dev);
263 }
264out_unlock:
265 device_unlock(dev);
266 return ret;
267}
268EXPORT_SYMBOL_GPL(device_attach);
269
270static int __driver_attach(struct device *dev, void *data)
271{
272 struct device_driver *drv = data;
273
274 /*
275 * Lock device and try to bind to it. We drop the error
276 * here and always return 0, because we need to keep trying
277 * to bind to devices and some drivers will return an error
278 * simply if it didn't support the device.
279 *
280 * driver_probe_device() will spit a warning if there
281 * is an error.
282 */
283
284 if (!driver_match_device(drv, dev))
285 return 0;
286
287 if (dev->parent) /* Needed for USB */
288 device_lock(dev->parent);
289 device_lock(dev);
290 if (!dev->driver)
291 driver_probe_device(drv, dev);
292 device_unlock(dev);
293 if (dev->parent)
294 device_unlock(dev->parent);
295
296 return 0;
297}
298
299/**
300 * driver_attach - try to bind driver to devices.
301 * @drv: driver.
302 *
303 * Walk the list of devices that the bus has on it and try to
304 * match the driver with each one. If driver_probe_device()
305 * returns 0 and the @dev->driver is set, we've found a
306 * compatible pair.
307 */
308int driver_attach(struct device_driver *drv)
309{
310 return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
311}
312EXPORT_SYMBOL_GPL(driver_attach);
313
314/*
315 * __device_release_driver() must be called with @dev lock held.
316 * When called for a USB interface, @dev->parent lock must be held as well.
317 */
318static void __device_release_driver(struct device *dev)
319{
320 struct device_driver *drv;
321
322 drv = dev->driver;
323 if (drv) {
324 pm_runtime_get_sync(dev);
325
326 driver_sysfs_remove(dev);
327
328 if (dev->bus)
329 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
330 BUS_NOTIFY_UNBIND_DRIVER,
331 dev);
332
333 pm_runtime_put_sync(dev);
334
335 if (dev->bus && dev->bus->remove)
336 dev->bus->remove(dev);
337 else if (drv->remove)
338 drv->remove(dev);
339 devres_release_all(dev);
340 dev->driver = NULL;
341 klist_remove(&dev->p->knode_driver);
342 if (dev->bus)
343 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
344 BUS_NOTIFY_UNBOUND_DRIVER,
345 dev);
346
347 }
348}
349
350/**
351 * device_release_driver - manually detach device from driver.
352 * @dev: device.
353 *
354 * Manually detach device from driver.
355 * When called for a USB interface, @dev->parent lock must be held.
356 */
357void device_release_driver(struct device *dev)
358{
359 /*
360 * If anyone calls device_release_driver() recursively from
361 * within their ->remove callback for the same device, they
362 * will deadlock right here.
363 */
364 device_lock(dev);
365 __device_release_driver(dev);
366 device_unlock(dev);
367}
368EXPORT_SYMBOL_GPL(device_release_driver);
369
370/**
371 * driver_detach - detach driver from all devices it controls.
372 * @drv: driver.
373 */
374void driver_detach(struct device_driver *drv)
375{
376 struct device_private *dev_prv;
377 struct device *dev;
378
379 for (;;) {
380 spin_lock(&drv->p->klist_devices.k_lock);
381 if (list_empty(&drv->p->klist_devices.k_list)) {
382 spin_unlock(&drv->p->klist_devices.k_lock);
383 break;
384 }
385 dev_prv = list_entry(drv->p->klist_devices.k_list.prev,
386 struct device_private,
387 knode_driver.n_node);
388 dev = dev_prv->device;
389 get_device(dev);
390 spin_unlock(&drv->p->klist_devices.k_lock);
391
392 if (dev->parent) /* Needed for USB */
393 device_lock(dev->parent);
394 device_lock(dev);
395 if (dev->driver == drv)
396 __device_release_driver(dev);
397 device_unlock(dev);
398 if (dev->parent)
399 device_unlock(dev->parent);
400 put_device(dev);
401 }
402}
403
404/*
405 * These exports can't be _GPL due to .h files using this within them, and it
406 * might break something that was previously working...
407 */
408void *dev_get_drvdata(const struct device *dev)
409{
410 if (dev && dev->p)
411 return dev->p->driver_data;
412 return NULL;
413}
414EXPORT_SYMBOL(dev_get_drvdata);
415
416int dev_set_drvdata(struct device *dev, void *data)
417{
418 int error;
419
420 if (!dev->p) {
421 error = device_private_init(dev);
422 if (error)
423 return error;
424 }
425 dev->p->driver_data = data;
426 return 0;
427}
428EXPORT_SYMBOL(dev_set_drvdata);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * drivers/base/dd.c - The core device/driver interactions.
4 *
5 * This file contains the (sometimes tricky) code that controls the
6 * interactions between devices and drivers, which primarily includes
7 * driver binding and unbinding.
8 *
9 * All of this code used to exist in drivers/base/bus.c, but was
10 * relocated to here in the name of compartmentalization (since it wasn't
11 * strictly code just for the 'struct bus_type'.
12 *
13 * Copyright (c) 2002-5 Patrick Mochel
14 * Copyright (c) 2002-3 Open Source Development Labs
15 * Copyright (c) 2007-2009 Greg Kroah-Hartman <gregkh@suse.de>
16 * Copyright (c) 2007-2009 Novell Inc.
17 */
18
19#include <linux/debugfs.h>
20#include <linux/device.h>
21#include <linux/delay.h>
22#include <linux/dma-map-ops.h>
23#include <linux/init.h>
24#include <linux/module.h>
25#include <linux/kthread.h>
26#include <linux/wait.h>
27#include <linux/async.h>
28#include <linux/pm_runtime.h>
29#include <linux/pinctrl/devinfo.h>
30#include <linux/slab.h>
31
32#include "base.h"
33#include "power/power.h"
34
35/*
36 * Deferred Probe infrastructure.
37 *
38 * Sometimes driver probe order matters, but the kernel doesn't always have
39 * dependency information which means some drivers will get probed before a
40 * resource it depends on is available. For example, an SDHCI driver may
41 * first need a GPIO line from an i2c GPIO controller before it can be
42 * initialized. If a required resource is not available yet, a driver can
43 * request probing to be deferred by returning -EPROBE_DEFER from its probe hook
44 *
45 * Deferred probe maintains two lists of devices, a pending list and an active
46 * list. A driver returning -EPROBE_DEFER causes the device to be added to the
47 * pending list. A successful driver probe will trigger moving all devices
48 * from the pending to the active list so that the workqueue will eventually
49 * retry them.
50 *
51 * The deferred_probe_mutex must be held any time the deferred_probe_*_list
52 * of the (struct device*)->p->deferred_probe pointers are manipulated
53 */
54static DEFINE_MUTEX(deferred_probe_mutex);
55static LIST_HEAD(deferred_probe_pending_list);
56static LIST_HEAD(deferred_probe_active_list);
57static atomic_t deferred_trigger_count = ATOMIC_INIT(0);
58static bool initcalls_done;
59
60/* Save the async probe drivers' name from kernel cmdline */
61#define ASYNC_DRV_NAMES_MAX_LEN 256
62static char async_probe_drv_names[ASYNC_DRV_NAMES_MAX_LEN];
63static bool async_probe_default;
64
65/*
66 * In some cases, like suspend to RAM or hibernation, It might be reasonable
67 * to prohibit probing of devices as it could be unsafe.
68 * Once defer_all_probes is true all drivers probes will be forcibly deferred.
69 */
70static bool defer_all_probes;
71
72static void __device_set_deferred_probe_reason(const struct device *dev, char *reason)
73{
74 kfree(dev->p->deferred_probe_reason);
75 dev->p->deferred_probe_reason = reason;
76}
77
78/*
79 * deferred_probe_work_func() - Retry probing devices in the active list.
80 */
81static void deferred_probe_work_func(struct work_struct *work)
82{
83 struct device *dev;
84 struct device_private *private;
85 /*
86 * This block processes every device in the deferred 'active' list.
87 * Each device is removed from the active list and passed to
88 * bus_probe_device() to re-attempt the probe. The loop continues
89 * until every device in the active list is removed and retried.
90 *
91 * Note: Once the device is removed from the list and the mutex is
92 * released, it is possible for the device get freed by another thread
93 * and cause a illegal pointer dereference. This code uses
94 * get/put_device() to ensure the device structure cannot disappear
95 * from under our feet.
96 */
97 mutex_lock(&deferred_probe_mutex);
98 while (!list_empty(&deferred_probe_active_list)) {
99 private = list_first_entry(&deferred_probe_active_list,
100 typeof(*dev->p), deferred_probe);
101 dev = private->device;
102 list_del_init(&private->deferred_probe);
103
104 get_device(dev);
105
106 __device_set_deferred_probe_reason(dev, NULL);
107
108 /*
109 * Drop the mutex while probing each device; the probe path may
110 * manipulate the deferred list
111 */
112 mutex_unlock(&deferred_probe_mutex);
113
114 /*
115 * Force the device to the end of the dpm_list since
116 * the PM code assumes that the order we add things to
117 * the list is a good order for suspend but deferred
118 * probe makes that very unsafe.
119 */
120 device_pm_move_to_tail(dev);
121
122 dev_dbg(dev, "Retrying from deferred list\n");
123 bus_probe_device(dev);
124 mutex_lock(&deferred_probe_mutex);
125
126 put_device(dev);
127 }
128 mutex_unlock(&deferred_probe_mutex);
129}
130static DECLARE_WORK(deferred_probe_work, deferred_probe_work_func);
131
132void driver_deferred_probe_add(struct device *dev)
133{
134 if (!dev->can_match)
135 return;
136
137 mutex_lock(&deferred_probe_mutex);
138 if (list_empty(&dev->p->deferred_probe)) {
139 dev_dbg(dev, "Added to deferred list\n");
140 list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
141 }
142 mutex_unlock(&deferred_probe_mutex);
143}
144
145void driver_deferred_probe_del(struct device *dev)
146{
147 mutex_lock(&deferred_probe_mutex);
148 if (!list_empty(&dev->p->deferred_probe)) {
149 dev_dbg(dev, "Removed from deferred list\n");
150 list_del_init(&dev->p->deferred_probe);
151 __device_set_deferred_probe_reason(dev, NULL);
152 }
153 mutex_unlock(&deferred_probe_mutex);
154}
155
156static bool driver_deferred_probe_enable;
157/**
158 * driver_deferred_probe_trigger() - Kick off re-probing deferred devices
159 *
160 * This functions moves all devices from the pending list to the active
161 * list and schedules the deferred probe workqueue to process them. It
162 * should be called anytime a driver is successfully bound to a device.
163 *
164 * Note, there is a race condition in multi-threaded probe. In the case where
165 * more than one device is probing at the same time, it is possible for one
166 * probe to complete successfully while another is about to defer. If the second
167 * depends on the first, then it will get put on the pending list after the
168 * trigger event has already occurred and will be stuck there.
169 *
170 * The atomic 'deferred_trigger_count' is used to determine if a successful
171 * trigger has occurred in the midst of probing a driver. If the trigger count
172 * changes in the midst of a probe, then deferred processing should be triggered
173 * again.
174 */
175void driver_deferred_probe_trigger(void)
176{
177 if (!driver_deferred_probe_enable)
178 return;
179
180 /*
181 * A successful probe means that all the devices in the pending list
182 * should be triggered to be reprobed. Move all the deferred devices
183 * into the active list so they can be retried by the workqueue
184 */
185 mutex_lock(&deferred_probe_mutex);
186 atomic_inc(&deferred_trigger_count);
187 list_splice_tail_init(&deferred_probe_pending_list,
188 &deferred_probe_active_list);
189 mutex_unlock(&deferred_probe_mutex);
190
191 /*
192 * Kick the re-probe thread. It may already be scheduled, but it is
193 * safe to kick it again.
194 */
195 queue_work(system_unbound_wq, &deferred_probe_work);
196}
197
198/**
199 * device_block_probing() - Block/defer device's probes
200 *
201 * It will disable probing of devices and defer their probes instead.
202 */
203void device_block_probing(void)
204{
205 defer_all_probes = true;
206 /* sync with probes to avoid races. */
207 wait_for_device_probe();
208}
209
210/**
211 * device_unblock_probing() - Unblock/enable device's probes
212 *
213 * It will restore normal behavior and trigger re-probing of deferred
214 * devices.
215 */
216void device_unblock_probing(void)
217{
218 defer_all_probes = false;
219 driver_deferred_probe_trigger();
220}
221
222/**
223 * device_set_deferred_probe_reason() - Set defer probe reason message for device
224 * @dev: the pointer to the struct device
225 * @vaf: the pointer to va_format structure with message
226 */
227void device_set_deferred_probe_reason(const struct device *dev, struct va_format *vaf)
228{
229 const char *drv = dev_driver_string(dev);
230 char *reason;
231
232 mutex_lock(&deferred_probe_mutex);
233
234 reason = kasprintf(GFP_KERNEL, "%s: %pV", drv, vaf);
235 __device_set_deferred_probe_reason(dev, reason);
236
237 mutex_unlock(&deferred_probe_mutex);
238}
239
240/*
241 * deferred_devs_show() - Show the devices in the deferred probe pending list.
242 */
243static int deferred_devs_show(struct seq_file *s, void *data)
244{
245 struct device_private *curr;
246
247 mutex_lock(&deferred_probe_mutex);
248
249 list_for_each_entry(curr, &deferred_probe_pending_list, deferred_probe)
250 seq_printf(s, "%s\t%s", dev_name(curr->device),
251 curr->device->p->deferred_probe_reason ?: "\n");
252
253 mutex_unlock(&deferred_probe_mutex);
254
255 return 0;
256}
257DEFINE_SHOW_ATTRIBUTE(deferred_devs);
258
259#ifdef CONFIG_MODULES
260static int driver_deferred_probe_timeout = 10;
261#else
262static int driver_deferred_probe_timeout;
263#endif
264
265static int __init deferred_probe_timeout_setup(char *str)
266{
267 int timeout;
268
269 if (!kstrtoint(str, 10, &timeout))
270 driver_deferred_probe_timeout = timeout;
271 return 1;
272}
273__setup("deferred_probe_timeout=", deferred_probe_timeout_setup);
274
275/**
276 * driver_deferred_probe_check_state() - Check deferred probe state
277 * @dev: device to check
278 *
279 * Return:
280 * * -ENODEV if initcalls have completed and modules are disabled.
281 * * -ETIMEDOUT if the deferred probe timeout was set and has expired
282 * and modules are enabled.
283 * * -EPROBE_DEFER in other cases.
284 *
285 * Drivers or subsystems can opt-in to calling this function instead of directly
286 * returning -EPROBE_DEFER.
287 */
288int driver_deferred_probe_check_state(struct device *dev)
289{
290 if (!IS_ENABLED(CONFIG_MODULES) && initcalls_done) {
291 dev_warn(dev, "ignoring dependency for device, assuming no driver\n");
292 return -ENODEV;
293 }
294
295 if (!driver_deferred_probe_timeout && initcalls_done) {
296 dev_warn(dev, "deferred probe timeout, ignoring dependency\n");
297 return -ETIMEDOUT;
298 }
299
300 return -EPROBE_DEFER;
301}
302EXPORT_SYMBOL_GPL(driver_deferred_probe_check_state);
303
304static void deferred_probe_timeout_work_func(struct work_struct *work)
305{
306 struct device_private *p;
307
308 fw_devlink_drivers_done();
309
310 driver_deferred_probe_timeout = 0;
311 driver_deferred_probe_trigger();
312 flush_work(&deferred_probe_work);
313
314 mutex_lock(&deferred_probe_mutex);
315 list_for_each_entry(p, &deferred_probe_pending_list, deferred_probe)
316 dev_warn(p->device, "deferred probe pending: %s", p->deferred_probe_reason ?: "(reason unknown)\n");
317 mutex_unlock(&deferred_probe_mutex);
318
319 fw_devlink_probing_done();
320}
321static DECLARE_DELAYED_WORK(deferred_probe_timeout_work, deferred_probe_timeout_work_func);
322
323void deferred_probe_extend_timeout(void)
324{
325 /*
326 * If the work hasn't been queued yet or if the work expired, don't
327 * start a new one.
328 */
329 if (cancel_delayed_work(&deferred_probe_timeout_work)) {
330 schedule_delayed_work(&deferred_probe_timeout_work,
331 driver_deferred_probe_timeout * HZ);
332 pr_debug("Extended deferred probe timeout by %d secs\n",
333 driver_deferred_probe_timeout);
334 }
335}
336
337/**
338 * deferred_probe_initcall() - Enable probing of deferred devices
339 *
340 * We don't want to get in the way when the bulk of drivers are getting probed.
341 * Instead, this initcall makes sure that deferred probing is delayed until
342 * late_initcall time.
343 */
344static int deferred_probe_initcall(void)
345{
346 debugfs_create_file("devices_deferred", 0444, NULL, NULL,
347 &deferred_devs_fops);
348
349 driver_deferred_probe_enable = true;
350 driver_deferred_probe_trigger();
351 /* Sort as many dependencies as possible before exiting initcalls */
352 flush_work(&deferred_probe_work);
353 initcalls_done = true;
354
355 if (!IS_ENABLED(CONFIG_MODULES))
356 fw_devlink_drivers_done();
357
358 /*
359 * Trigger deferred probe again, this time we won't defer anything
360 * that is optional
361 */
362 driver_deferred_probe_trigger();
363 flush_work(&deferred_probe_work);
364
365 if (driver_deferred_probe_timeout > 0) {
366 schedule_delayed_work(&deferred_probe_timeout_work,
367 driver_deferred_probe_timeout * HZ);
368 }
369
370 if (!IS_ENABLED(CONFIG_MODULES))
371 fw_devlink_probing_done();
372
373 return 0;
374}
375late_initcall(deferred_probe_initcall);
376
377static void __exit deferred_probe_exit(void)
378{
379 debugfs_lookup_and_remove("devices_deferred", NULL);
380}
381__exitcall(deferred_probe_exit);
382
383/**
384 * device_is_bound() - Check if device is bound to a driver
385 * @dev: device to check
386 *
387 * Returns true if passed device has already finished probing successfully
388 * against a driver.
389 *
390 * This function must be called with the device lock held.
391 */
392bool device_is_bound(struct device *dev)
393{
394 return dev->p && klist_node_attached(&dev->p->knode_driver);
395}
396
397static void driver_bound(struct device *dev)
398{
399 if (device_is_bound(dev)) {
400 dev_warn(dev, "%s: device already bound\n", __func__);
401 return;
402 }
403
404 dev_dbg(dev, "driver: '%s': %s: bound to device\n", dev->driver->name,
405 __func__);
406
407 klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices);
408 device_links_driver_bound(dev);
409
410 device_pm_check_callbacks(dev);
411
412 /*
413 * Make sure the device is no longer in one of the deferred lists and
414 * kick off retrying all pending devices
415 */
416 driver_deferred_probe_del(dev);
417 driver_deferred_probe_trigger();
418
419 bus_notify(dev, BUS_NOTIFY_BOUND_DRIVER);
420 kobject_uevent(&dev->kobj, KOBJ_BIND);
421}
422
423static ssize_t coredump_store(struct device *dev, struct device_attribute *attr,
424 const char *buf, size_t count)
425{
426 device_lock(dev);
427 dev->driver->coredump(dev);
428 device_unlock(dev);
429
430 return count;
431}
432static DEVICE_ATTR_WO(coredump);
433
434static int driver_sysfs_add(struct device *dev)
435{
436 int ret;
437
438 bus_notify(dev, BUS_NOTIFY_BIND_DRIVER);
439
440 ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj,
441 kobject_name(&dev->kobj));
442 if (ret)
443 goto fail;
444
445 ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj,
446 "driver");
447 if (ret)
448 goto rm_dev;
449
450 if (!IS_ENABLED(CONFIG_DEV_COREDUMP) || !dev->driver->coredump)
451 return 0;
452
453 ret = device_create_file(dev, &dev_attr_coredump);
454 if (!ret)
455 return 0;
456
457 sysfs_remove_link(&dev->kobj, "driver");
458
459rm_dev:
460 sysfs_remove_link(&dev->driver->p->kobj,
461 kobject_name(&dev->kobj));
462
463fail:
464 return ret;
465}
466
467static void driver_sysfs_remove(struct device *dev)
468{
469 struct device_driver *drv = dev->driver;
470
471 if (drv) {
472 if (drv->coredump)
473 device_remove_file(dev, &dev_attr_coredump);
474 sysfs_remove_link(&drv->p->kobj, kobject_name(&dev->kobj));
475 sysfs_remove_link(&dev->kobj, "driver");
476 }
477}
478
479/**
480 * device_bind_driver - bind a driver to one device.
481 * @dev: device.
482 *
483 * Allow manual attachment of a driver to a device.
484 * Caller must have already set @dev->driver.
485 *
486 * Note that this does not modify the bus reference count.
487 * Please verify that is accounted for before calling this.
488 * (It is ok to call with no other effort from a driver's probe() method.)
489 *
490 * This function must be called with the device lock held.
491 *
492 * Callers should prefer to use device_driver_attach() instead.
493 */
494int device_bind_driver(struct device *dev)
495{
496 int ret;
497
498 ret = driver_sysfs_add(dev);
499 if (!ret) {
500 device_links_force_bind(dev);
501 driver_bound(dev);
502 }
503 else
504 bus_notify(dev, BUS_NOTIFY_DRIVER_NOT_BOUND);
505 return ret;
506}
507EXPORT_SYMBOL_GPL(device_bind_driver);
508
509static atomic_t probe_count = ATOMIC_INIT(0);
510static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue);
511
512static ssize_t state_synced_store(struct device *dev,
513 struct device_attribute *attr,
514 const char *buf, size_t count)
515{
516 int ret = 0;
517
518 if (strcmp("1", buf))
519 return -EINVAL;
520
521 device_lock(dev);
522 if (!dev->state_synced) {
523 dev->state_synced = true;
524 dev_sync_state(dev);
525 } else {
526 ret = -EINVAL;
527 }
528 device_unlock(dev);
529
530 return ret ? ret : count;
531}
532
533static ssize_t state_synced_show(struct device *dev,
534 struct device_attribute *attr, char *buf)
535{
536 bool val;
537
538 device_lock(dev);
539 val = dev->state_synced;
540 device_unlock(dev);
541
542 return sysfs_emit(buf, "%u\n", val);
543}
544static DEVICE_ATTR_RW(state_synced);
545
546static void device_unbind_cleanup(struct device *dev)
547{
548 devres_release_all(dev);
549 arch_teardown_dma_ops(dev);
550 kfree(dev->dma_range_map);
551 dev->dma_range_map = NULL;
552 dev->driver = NULL;
553 dev_set_drvdata(dev, NULL);
554 if (dev->pm_domain && dev->pm_domain->dismiss)
555 dev->pm_domain->dismiss(dev);
556 pm_runtime_reinit(dev);
557 dev_pm_set_driver_flags(dev, 0);
558}
559
560static void device_remove(struct device *dev)
561{
562 device_remove_file(dev, &dev_attr_state_synced);
563 device_remove_groups(dev, dev->driver->dev_groups);
564
565 if (dev->bus && dev->bus->remove)
566 dev->bus->remove(dev);
567 else if (dev->driver->remove)
568 dev->driver->remove(dev);
569}
570
571static int call_driver_probe(struct device *dev, struct device_driver *drv)
572{
573 int ret = 0;
574
575 if (dev->bus->probe)
576 ret = dev->bus->probe(dev);
577 else if (drv->probe)
578 ret = drv->probe(dev);
579
580 switch (ret) {
581 case 0:
582 break;
583 case -EPROBE_DEFER:
584 /* Driver requested deferred probing */
585 dev_dbg(dev, "Driver %s requests probe deferral\n", drv->name);
586 break;
587 case -ENODEV:
588 case -ENXIO:
589 dev_dbg(dev, "probe with driver %s rejects match %d\n",
590 drv->name, ret);
591 break;
592 default:
593 /* driver matched but the probe failed */
594 dev_err(dev, "probe with driver %s failed with error %d\n",
595 drv->name, ret);
596 break;
597 }
598
599 return ret;
600}
601
602static int really_probe(struct device *dev, struct device_driver *drv)
603{
604 bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) &&
605 !drv->suppress_bind_attrs;
606 int ret, link_ret;
607
608 if (defer_all_probes) {
609 /*
610 * Value of defer_all_probes can be set only by
611 * device_block_probing() which, in turn, will call
612 * wait_for_device_probe() right after that to avoid any races.
613 */
614 dev_dbg(dev, "Driver %s force probe deferral\n", drv->name);
615 return -EPROBE_DEFER;
616 }
617
618 link_ret = device_links_check_suppliers(dev);
619 if (link_ret == -EPROBE_DEFER)
620 return link_ret;
621
622 dev_dbg(dev, "bus: '%s': %s: probing driver %s with device\n",
623 drv->bus->name, __func__, drv->name);
624 if (!list_empty(&dev->devres_head)) {
625 dev_crit(dev, "Resources present before probing\n");
626 ret = -EBUSY;
627 goto done;
628 }
629
630re_probe:
631 dev->driver = drv;
632
633 /* If using pinctrl, bind pins now before probing */
634 ret = pinctrl_bind_pins(dev);
635 if (ret)
636 goto pinctrl_bind_failed;
637
638 if (dev->bus->dma_configure) {
639 ret = dev->bus->dma_configure(dev);
640 if (ret)
641 goto pinctrl_bind_failed;
642 }
643
644 ret = driver_sysfs_add(dev);
645 if (ret) {
646 dev_err(dev, "%s: driver_sysfs_add failed\n", __func__);
647 goto sysfs_failed;
648 }
649
650 if (dev->pm_domain && dev->pm_domain->activate) {
651 ret = dev->pm_domain->activate(dev);
652 if (ret)
653 goto probe_failed;
654 }
655
656 ret = call_driver_probe(dev, drv);
657 if (ret) {
658 /*
659 * If fw_devlink_best_effort is active (denoted by -EAGAIN), the
660 * device might actually probe properly once some of its missing
661 * suppliers have probed. So, treat this as if the driver
662 * returned -EPROBE_DEFER.
663 */
664 if (link_ret == -EAGAIN)
665 ret = -EPROBE_DEFER;
666
667 /*
668 * Return probe errors as positive values so that the callers
669 * can distinguish them from other errors.
670 */
671 ret = -ret;
672 goto probe_failed;
673 }
674
675 ret = device_add_groups(dev, drv->dev_groups);
676 if (ret) {
677 dev_err(dev, "device_add_groups() failed\n");
678 goto dev_groups_failed;
679 }
680
681 if (dev_has_sync_state(dev)) {
682 ret = device_create_file(dev, &dev_attr_state_synced);
683 if (ret) {
684 dev_err(dev, "state_synced sysfs add failed\n");
685 goto dev_sysfs_state_synced_failed;
686 }
687 }
688
689 if (test_remove) {
690 test_remove = false;
691
692 device_remove(dev);
693 driver_sysfs_remove(dev);
694 if (dev->bus && dev->bus->dma_cleanup)
695 dev->bus->dma_cleanup(dev);
696 device_unbind_cleanup(dev);
697
698 goto re_probe;
699 }
700
701 pinctrl_init_done(dev);
702
703 if (dev->pm_domain && dev->pm_domain->sync)
704 dev->pm_domain->sync(dev);
705
706 driver_bound(dev);
707 dev_dbg(dev, "bus: '%s': %s: bound device to driver %s\n",
708 drv->bus->name, __func__, drv->name);
709 goto done;
710
711dev_sysfs_state_synced_failed:
712dev_groups_failed:
713 device_remove(dev);
714probe_failed:
715 driver_sysfs_remove(dev);
716sysfs_failed:
717 bus_notify(dev, BUS_NOTIFY_DRIVER_NOT_BOUND);
718 if (dev->bus && dev->bus->dma_cleanup)
719 dev->bus->dma_cleanup(dev);
720pinctrl_bind_failed:
721 device_links_no_driver(dev);
722 device_unbind_cleanup(dev);
723done:
724 return ret;
725}
726
727/*
728 * For initcall_debug, show the driver probe time.
729 */
730static int really_probe_debug(struct device *dev, struct device_driver *drv)
731{
732 ktime_t calltime, rettime;
733 int ret;
734
735 calltime = ktime_get();
736 ret = really_probe(dev, drv);
737 rettime = ktime_get();
738 /*
739 * Don't change this to pr_debug() because that requires
740 * CONFIG_DYNAMIC_DEBUG and we want a simple 'initcall_debug' on the
741 * kernel commandline to print this all the time at the debug level.
742 */
743 printk(KERN_DEBUG "probe of %s returned %d after %lld usecs\n",
744 dev_name(dev), ret, ktime_us_delta(rettime, calltime));
745 return ret;
746}
747
748/**
749 * driver_probe_done
750 * Determine if the probe sequence is finished or not.
751 *
752 * Should somehow figure out how to use a semaphore, not an atomic variable...
753 */
754bool __init driver_probe_done(void)
755{
756 int local_probe_count = atomic_read(&probe_count);
757
758 pr_debug("%s: probe_count = %d\n", __func__, local_probe_count);
759 return !local_probe_count;
760}
761
762/**
763 * wait_for_device_probe
764 * Wait for device probing to be completed.
765 */
766void wait_for_device_probe(void)
767{
768 /* wait for the deferred probe workqueue to finish */
769 flush_work(&deferred_probe_work);
770
771 /* wait for the known devices to complete their probing */
772 wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
773 async_synchronize_full();
774}
775EXPORT_SYMBOL_GPL(wait_for_device_probe);
776
777static int __driver_probe_device(struct device_driver *drv, struct device *dev)
778{
779 int ret = 0;
780
781 if (dev->p->dead || !device_is_registered(dev))
782 return -ENODEV;
783 if (dev->driver)
784 return -EBUSY;
785
786 dev->can_match = true;
787 dev_dbg(dev, "bus: '%s': %s: matched device with driver %s\n",
788 drv->bus->name, __func__, drv->name);
789
790 pm_runtime_get_suppliers(dev);
791 if (dev->parent)
792 pm_runtime_get_sync(dev->parent);
793
794 pm_runtime_barrier(dev);
795 if (initcall_debug)
796 ret = really_probe_debug(dev, drv);
797 else
798 ret = really_probe(dev, drv);
799 pm_request_idle(dev);
800
801 if (dev->parent)
802 pm_runtime_put(dev->parent);
803
804 pm_runtime_put_suppliers(dev);
805 return ret;
806}
807
808/**
809 * driver_probe_device - attempt to bind device & driver together
810 * @drv: driver to bind a device to
811 * @dev: device to try to bind to the driver
812 *
813 * This function returns -ENODEV if the device is not registered, -EBUSY if it
814 * already has a driver, 0 if the device is bound successfully and a positive
815 * (inverted) error code for failures from the ->probe method.
816 *
817 * This function must be called with @dev lock held. When called for a
818 * USB interface, @dev->parent lock must be held as well.
819 *
820 * If the device has a parent, runtime-resume the parent before driver probing.
821 */
822static int driver_probe_device(struct device_driver *drv, struct device *dev)
823{
824 int trigger_count = atomic_read(&deferred_trigger_count);
825 int ret;
826
827 atomic_inc(&probe_count);
828 ret = __driver_probe_device(drv, dev);
829 if (ret == -EPROBE_DEFER || ret == EPROBE_DEFER) {
830 driver_deferred_probe_add(dev);
831
832 /*
833 * Did a trigger occur while probing? Need to re-trigger if yes
834 */
835 if (trigger_count != atomic_read(&deferred_trigger_count) &&
836 !defer_all_probes)
837 driver_deferred_probe_trigger();
838 }
839 atomic_dec(&probe_count);
840 wake_up_all(&probe_waitqueue);
841 return ret;
842}
843
844static inline bool cmdline_requested_async_probing(const char *drv_name)
845{
846 bool async_drv;
847
848 async_drv = parse_option_str(async_probe_drv_names, drv_name);
849
850 return (async_probe_default != async_drv);
851}
852
853/* The option format is "driver_async_probe=drv_name1,drv_name2,..." */
854static int __init save_async_options(char *buf)
855{
856 if (strlen(buf) >= ASYNC_DRV_NAMES_MAX_LEN)
857 pr_warn("Too long list of driver names for 'driver_async_probe'!\n");
858
859 strscpy(async_probe_drv_names, buf, ASYNC_DRV_NAMES_MAX_LEN);
860 async_probe_default = parse_option_str(async_probe_drv_names, "*");
861
862 return 1;
863}
864__setup("driver_async_probe=", save_async_options);
865
866static bool driver_allows_async_probing(struct device_driver *drv)
867{
868 switch (drv->probe_type) {
869 case PROBE_PREFER_ASYNCHRONOUS:
870 return true;
871
872 case PROBE_FORCE_SYNCHRONOUS:
873 return false;
874
875 default:
876 if (cmdline_requested_async_probing(drv->name))
877 return true;
878
879 if (module_requested_async_probing(drv->owner))
880 return true;
881
882 return false;
883 }
884}
885
886struct device_attach_data {
887 struct device *dev;
888
889 /*
890 * Indicates whether we are considering asynchronous probing or
891 * not. Only initial binding after device or driver registration
892 * (including deferral processing) may be done asynchronously, the
893 * rest is always synchronous, as we expect it is being done by
894 * request from userspace.
895 */
896 bool check_async;
897
898 /*
899 * Indicates if we are binding synchronous or asynchronous drivers.
900 * When asynchronous probing is enabled we'll execute 2 passes
901 * over drivers: first pass doing synchronous probing and second
902 * doing asynchronous probing (if synchronous did not succeed -
903 * most likely because there was no driver requiring synchronous
904 * probing - and we found asynchronous driver during first pass).
905 * The 2 passes are done because we can't shoot asynchronous
906 * probe for given device and driver from bus_for_each_drv() since
907 * driver pointer is not guaranteed to stay valid once
908 * bus_for_each_drv() iterates to the next driver on the bus.
909 */
910 bool want_async;
911
912 /*
913 * We'll set have_async to 'true' if, while scanning for matching
914 * driver, we'll encounter one that requests asynchronous probing.
915 */
916 bool have_async;
917};
918
919static int __device_attach_driver(struct device_driver *drv, void *_data)
920{
921 struct device_attach_data *data = _data;
922 struct device *dev = data->dev;
923 bool async_allowed;
924 int ret;
925
926 ret = driver_match_device(drv, dev);
927 if (ret == 0) {
928 /* no match */
929 return 0;
930 } else if (ret == -EPROBE_DEFER) {
931 dev_dbg(dev, "Device match requests probe deferral\n");
932 dev->can_match = true;
933 driver_deferred_probe_add(dev);
934 /*
935 * Device can't match with a driver right now, so don't attempt
936 * to match or bind with other drivers on the bus.
937 */
938 return ret;
939 } else if (ret < 0) {
940 dev_dbg(dev, "Bus failed to match device: %d\n", ret);
941 return ret;
942 } /* ret > 0 means positive match */
943
944 async_allowed = driver_allows_async_probing(drv);
945
946 if (async_allowed)
947 data->have_async = true;
948
949 if (data->check_async && async_allowed != data->want_async)
950 return 0;
951
952 /*
953 * Ignore errors returned by ->probe so that the next driver can try
954 * its luck.
955 */
956 ret = driver_probe_device(drv, dev);
957 if (ret < 0)
958 return ret;
959 return ret == 0;
960}
961
962static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
963{
964 struct device *dev = _dev;
965 struct device_attach_data data = {
966 .dev = dev,
967 .check_async = true,
968 .want_async = true,
969 };
970
971 device_lock(dev);
972
973 /*
974 * Check if device has already been removed or claimed. This may
975 * happen with driver loading, device discovery/registration,
976 * and deferred probe processing happens all at once with
977 * multiple threads.
978 */
979 if (dev->p->dead || dev->driver)
980 goto out_unlock;
981
982 if (dev->parent)
983 pm_runtime_get_sync(dev->parent);
984
985 bus_for_each_drv(dev->bus, NULL, &data, __device_attach_driver);
986 dev_dbg(dev, "async probe completed\n");
987
988 pm_request_idle(dev);
989
990 if (dev->parent)
991 pm_runtime_put(dev->parent);
992out_unlock:
993 device_unlock(dev);
994
995 put_device(dev);
996}
997
998static int __device_attach(struct device *dev, bool allow_async)
999{
1000 int ret = 0;
1001 bool async = false;
1002
1003 device_lock(dev);
1004 if (dev->p->dead) {
1005 goto out_unlock;
1006 } else if (dev->driver) {
1007 if (device_is_bound(dev)) {
1008 ret = 1;
1009 goto out_unlock;
1010 }
1011 ret = device_bind_driver(dev);
1012 if (ret == 0)
1013 ret = 1;
1014 else {
1015 dev->driver = NULL;
1016 ret = 0;
1017 }
1018 } else {
1019 struct device_attach_data data = {
1020 .dev = dev,
1021 .check_async = allow_async,
1022 .want_async = false,
1023 };
1024
1025 if (dev->parent)
1026 pm_runtime_get_sync(dev->parent);
1027
1028 ret = bus_for_each_drv(dev->bus, NULL, &data,
1029 __device_attach_driver);
1030 if (!ret && allow_async && data.have_async) {
1031 /*
1032 * If we could not find appropriate driver
1033 * synchronously and we are allowed to do
1034 * async probes and there are drivers that
1035 * want to probe asynchronously, we'll
1036 * try them.
1037 */
1038 dev_dbg(dev, "scheduling asynchronous probe\n");
1039 get_device(dev);
1040 async = true;
1041 } else {
1042 pm_request_idle(dev);
1043 }
1044
1045 if (dev->parent)
1046 pm_runtime_put(dev->parent);
1047 }
1048out_unlock:
1049 device_unlock(dev);
1050 if (async)
1051 async_schedule_dev(__device_attach_async_helper, dev);
1052 return ret;
1053}
1054
1055/**
1056 * device_attach - try to attach device to a driver.
1057 * @dev: device.
1058 *
1059 * Walk the list of drivers that the bus has and call
1060 * driver_probe_device() for each pair. If a compatible
1061 * pair is found, break out and return.
1062 *
1063 * Returns 1 if the device was bound to a driver;
1064 * 0 if no matching driver was found;
1065 * -ENODEV if the device is not registered.
1066 *
1067 * When called for a USB interface, @dev->parent lock must be held.
1068 */
1069int device_attach(struct device *dev)
1070{
1071 return __device_attach(dev, false);
1072}
1073EXPORT_SYMBOL_GPL(device_attach);
1074
1075void device_initial_probe(struct device *dev)
1076{
1077 __device_attach(dev, true);
1078}
1079
1080/*
1081 * __device_driver_lock - acquire locks needed to manipulate dev->drv
1082 * @dev: Device we will update driver info for
1083 * @parent: Parent device. Needed if the bus requires parent lock
1084 *
1085 * This function will take the required locks for manipulating dev->drv.
1086 * Normally this will just be the @dev lock, but when called for a USB
1087 * interface, @parent lock will be held as well.
1088 */
1089static void __device_driver_lock(struct device *dev, struct device *parent)
1090{
1091 if (parent && dev->bus->need_parent_lock)
1092 device_lock(parent);
1093 device_lock(dev);
1094}
1095
1096/*
1097 * __device_driver_unlock - release locks needed to manipulate dev->drv
1098 * @dev: Device we will update driver info for
1099 * @parent: Parent device. Needed if the bus requires parent lock
1100 *
1101 * This function will release the required locks for manipulating dev->drv.
1102 * Normally this will just be the @dev lock, but when called for a
1103 * USB interface, @parent lock will be released as well.
1104 */
1105static void __device_driver_unlock(struct device *dev, struct device *parent)
1106{
1107 device_unlock(dev);
1108 if (parent && dev->bus->need_parent_lock)
1109 device_unlock(parent);
1110}
1111
1112/**
1113 * device_driver_attach - attach a specific driver to a specific device
1114 * @drv: Driver to attach
1115 * @dev: Device to attach it to
1116 *
1117 * Manually attach driver to a device. Will acquire both @dev lock and
1118 * @dev->parent lock if needed. Returns 0 on success, -ERR on failure.
1119 */
1120int device_driver_attach(struct device_driver *drv, struct device *dev)
1121{
1122 int ret;
1123
1124 __device_driver_lock(dev, dev->parent);
1125 ret = __driver_probe_device(drv, dev);
1126 __device_driver_unlock(dev, dev->parent);
1127
1128 /* also return probe errors as normal negative errnos */
1129 if (ret > 0)
1130 ret = -ret;
1131 if (ret == -EPROBE_DEFER)
1132 return -EAGAIN;
1133 return ret;
1134}
1135EXPORT_SYMBOL_GPL(device_driver_attach);
1136
1137static void __driver_attach_async_helper(void *_dev, async_cookie_t cookie)
1138{
1139 struct device *dev = _dev;
1140 struct device_driver *drv;
1141 int ret;
1142
1143 __device_driver_lock(dev, dev->parent);
1144 drv = dev->p->async_driver;
1145 dev->p->async_driver = NULL;
1146 ret = driver_probe_device(drv, dev);
1147 __device_driver_unlock(dev, dev->parent);
1148
1149 dev_dbg(dev, "driver %s async attach completed: %d\n", drv->name, ret);
1150
1151 put_device(dev);
1152}
1153
1154static int __driver_attach(struct device *dev, void *data)
1155{
1156 struct device_driver *drv = data;
1157 bool async = false;
1158 int ret;
1159
1160 /*
1161 * Lock device and try to bind to it. We drop the error
1162 * here and always return 0, because we need to keep trying
1163 * to bind to devices and some drivers will return an error
1164 * simply if it didn't support the device.
1165 *
1166 * driver_probe_device() will spit a warning if there
1167 * is an error.
1168 */
1169
1170 ret = driver_match_device(drv, dev);
1171 if (ret == 0) {
1172 /* no match */
1173 return 0;
1174 } else if (ret == -EPROBE_DEFER) {
1175 dev_dbg(dev, "Device match requests probe deferral\n");
1176 dev->can_match = true;
1177 driver_deferred_probe_add(dev);
1178 /*
1179 * Driver could not match with device, but may match with
1180 * another device on the bus.
1181 */
1182 return 0;
1183 } else if (ret < 0) {
1184 dev_dbg(dev, "Bus failed to match device: %d\n", ret);
1185 /*
1186 * Driver could not match with device, but may match with
1187 * another device on the bus.
1188 */
1189 return 0;
1190 } /* ret > 0 means positive match */
1191
1192 if (driver_allows_async_probing(drv)) {
1193 /*
1194 * Instead of probing the device synchronously we will
1195 * probe it asynchronously to allow for more parallelism.
1196 *
1197 * We only take the device lock here in order to guarantee
1198 * that the dev->driver and async_driver fields are protected
1199 */
1200 dev_dbg(dev, "probing driver %s asynchronously\n", drv->name);
1201 device_lock(dev);
1202 if (!dev->driver && !dev->p->async_driver) {
1203 get_device(dev);
1204 dev->p->async_driver = drv;
1205 async = true;
1206 }
1207 device_unlock(dev);
1208 if (async)
1209 async_schedule_dev(__driver_attach_async_helper, dev);
1210 return 0;
1211 }
1212
1213 __device_driver_lock(dev, dev->parent);
1214 driver_probe_device(drv, dev);
1215 __device_driver_unlock(dev, dev->parent);
1216
1217 return 0;
1218}
1219
1220/**
1221 * driver_attach - try to bind driver to devices.
1222 * @drv: driver.
1223 *
1224 * Walk the list of devices that the bus has on it and try to
1225 * match the driver with each one. If driver_probe_device()
1226 * returns 0 and the @dev->driver is set, we've found a
1227 * compatible pair.
1228 */
1229int driver_attach(struct device_driver *drv)
1230{
1231 return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
1232}
1233EXPORT_SYMBOL_GPL(driver_attach);
1234
1235/*
1236 * __device_release_driver() must be called with @dev lock held.
1237 * When called for a USB interface, @dev->parent lock must be held as well.
1238 */
1239static void __device_release_driver(struct device *dev, struct device *parent)
1240{
1241 struct device_driver *drv;
1242
1243 drv = dev->driver;
1244 if (drv) {
1245 pm_runtime_get_sync(dev);
1246
1247 while (device_links_busy(dev)) {
1248 __device_driver_unlock(dev, parent);
1249
1250 device_links_unbind_consumers(dev);
1251
1252 __device_driver_lock(dev, parent);
1253 /*
1254 * A concurrent invocation of the same function might
1255 * have released the driver successfully while this one
1256 * was waiting, so check for that.
1257 */
1258 if (dev->driver != drv) {
1259 pm_runtime_put(dev);
1260 return;
1261 }
1262 }
1263
1264 driver_sysfs_remove(dev);
1265
1266 bus_notify(dev, BUS_NOTIFY_UNBIND_DRIVER);
1267
1268 pm_runtime_put_sync(dev);
1269
1270 device_remove(dev);
1271
1272 if (dev->bus && dev->bus->dma_cleanup)
1273 dev->bus->dma_cleanup(dev);
1274
1275 device_unbind_cleanup(dev);
1276 device_links_driver_cleanup(dev);
1277
1278 klist_remove(&dev->p->knode_driver);
1279 device_pm_check_callbacks(dev);
1280
1281 bus_notify(dev, BUS_NOTIFY_UNBOUND_DRIVER);
1282 kobject_uevent(&dev->kobj, KOBJ_UNBIND);
1283 }
1284}
1285
1286void device_release_driver_internal(struct device *dev,
1287 struct device_driver *drv,
1288 struct device *parent)
1289{
1290 __device_driver_lock(dev, parent);
1291
1292 if (!drv || drv == dev->driver)
1293 __device_release_driver(dev, parent);
1294
1295 __device_driver_unlock(dev, parent);
1296}
1297
1298/**
1299 * device_release_driver - manually detach device from driver.
1300 * @dev: device.
1301 *
1302 * Manually detach device from driver.
1303 * When called for a USB interface, @dev->parent lock must be held.
1304 *
1305 * If this function is to be called with @dev->parent lock held, ensure that
1306 * the device's consumers are unbound in advance or that their locks can be
1307 * acquired under the @dev->parent lock.
1308 */
1309void device_release_driver(struct device *dev)
1310{
1311 /*
1312 * If anyone calls device_release_driver() recursively from
1313 * within their ->remove callback for the same device, they
1314 * will deadlock right here.
1315 */
1316 device_release_driver_internal(dev, NULL, NULL);
1317}
1318EXPORT_SYMBOL_GPL(device_release_driver);
1319
1320/**
1321 * device_driver_detach - detach driver from a specific device
1322 * @dev: device to detach driver from
1323 *
1324 * Detach driver from device. Will acquire both @dev lock and @dev->parent
1325 * lock if needed.
1326 */
1327void device_driver_detach(struct device *dev)
1328{
1329 device_release_driver_internal(dev, NULL, dev->parent);
1330}
1331
1332/**
1333 * driver_detach - detach driver from all devices it controls.
1334 * @drv: driver.
1335 */
1336void driver_detach(struct device_driver *drv)
1337{
1338 struct device_private *dev_prv;
1339 struct device *dev;
1340
1341 if (driver_allows_async_probing(drv))
1342 async_synchronize_full();
1343
1344 for (;;) {
1345 spin_lock(&drv->p->klist_devices.k_lock);
1346 if (list_empty(&drv->p->klist_devices.k_list)) {
1347 spin_unlock(&drv->p->klist_devices.k_lock);
1348 break;
1349 }
1350 dev_prv = list_last_entry(&drv->p->klist_devices.k_list,
1351 struct device_private,
1352 knode_driver.n_node);
1353 dev = dev_prv->device;
1354 get_device(dev);
1355 spin_unlock(&drv->p->klist_devices.k_lock);
1356 device_release_driver_internal(dev, drv, dev->parent);
1357 put_device(dev);
1358 }
1359}