Loading...
1#include <linux/init.h>
2#include <linux/bitops.h>
3#include <linux/mm.h>
4
5#include <linux/io.h>
6#include <asm/processor.h>
7#include <asm/apic.h>
8#include <asm/cpu.h>
9#include <asm/pci-direct.h>
10
11#ifdef CONFIG_X86_64
12# include <asm/numa_64.h>
13# include <asm/mmconfig.h>
14# include <asm/cacheflush.h>
15#endif
16
17#include "cpu.h"
18
19#ifdef CONFIG_X86_32
20/*
21 * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
22 * misexecution of code under Linux. Owners of such processors should
23 * contact AMD for precise details and a CPU swap.
24 *
25 * See http://www.multimania.com/poulot/k6bug.html
26 * http://www.amd.com/K6/k6docs/revgd.html
27 *
28 * The following test is erm.. interesting. AMD neglected to up
29 * the chip setting when fixing the bug but they also tweaked some
30 * performance at the same time..
31 */
32
33extern void vide(void);
34__asm__(".align 4\nvide: ret");
35
36static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
37{
38/*
39 * General Systems BIOSen alias the cpu frequency registers
40 * of the Elan at 0x000df000. Unfortuantly, one of the Linux
41 * drivers subsequently pokes it, and changes the CPU speed.
42 * Workaround : Remove the unneeded alias.
43 */
44#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
45#define CBAR_ENB (0x80000000)
46#define CBAR_KEY (0X000000CB)
47 if (c->x86_model == 9 || c->x86_model == 10) {
48 if (inl(CBAR) & CBAR_ENB)
49 outl(0 | CBAR_KEY, CBAR);
50 }
51}
52
53
54static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
55{
56 u32 l, h;
57 int mbytes = num_physpages >> (20-PAGE_SHIFT);
58
59 if (c->x86_model < 6) {
60 /* Based on AMD doc 20734R - June 2000 */
61 if (c->x86_model == 0) {
62 clear_cpu_cap(c, X86_FEATURE_APIC);
63 set_cpu_cap(c, X86_FEATURE_PGE);
64 }
65 return;
66 }
67
68 if (c->x86_model == 6 && c->x86_mask == 1) {
69 const int K6_BUG_LOOP = 1000000;
70 int n;
71 void (*f_vide)(void);
72 unsigned long d, d2;
73
74 printk(KERN_INFO "AMD K6 stepping B detected - ");
75
76 /*
77 * It looks like AMD fixed the 2.6.2 bug and improved indirect
78 * calls at the same time.
79 */
80
81 n = K6_BUG_LOOP;
82 f_vide = vide;
83 rdtscl(d);
84 while (n--)
85 f_vide();
86 rdtscl(d2);
87 d = d2-d;
88
89 if (d > 20*K6_BUG_LOOP)
90 printk(KERN_CONT
91 "system stability may be impaired when more than 32 MB are used.\n");
92 else
93 printk(KERN_CONT "probably OK (after B9730xxxx).\n");
94 printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
95 }
96
97 /* K6 with old style WHCR */
98 if (c->x86_model < 8 ||
99 (c->x86_model == 8 && c->x86_mask < 8)) {
100 /* We can only write allocate on the low 508Mb */
101 if (mbytes > 508)
102 mbytes = 508;
103
104 rdmsr(MSR_K6_WHCR, l, h);
105 if ((l&0x0000FFFF) == 0) {
106 unsigned long flags;
107 l = (1<<0)|((mbytes/4)<<1);
108 local_irq_save(flags);
109 wbinvd();
110 wrmsr(MSR_K6_WHCR, l, h);
111 local_irq_restore(flags);
112 printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
113 mbytes);
114 }
115 return;
116 }
117
118 if ((c->x86_model == 8 && c->x86_mask > 7) ||
119 c->x86_model == 9 || c->x86_model == 13) {
120 /* The more serious chips .. */
121
122 if (mbytes > 4092)
123 mbytes = 4092;
124
125 rdmsr(MSR_K6_WHCR, l, h);
126 if ((l&0xFFFF0000) == 0) {
127 unsigned long flags;
128 l = ((mbytes>>2)<<22)|(1<<16);
129 local_irq_save(flags);
130 wbinvd();
131 wrmsr(MSR_K6_WHCR, l, h);
132 local_irq_restore(flags);
133 printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
134 mbytes);
135 }
136
137 return;
138 }
139
140 if (c->x86_model == 10) {
141 /* AMD Geode LX is model 10 */
142 /* placeholder for any needed mods */
143 return;
144 }
145}
146
147static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c)
148{
149#ifdef CONFIG_SMP
150 /* calling is from identify_secondary_cpu() ? */
151 if (!c->cpu_index)
152 return;
153
154 /*
155 * Certain Athlons might work (for various values of 'work') in SMP
156 * but they are not certified as MP capable.
157 */
158 /* Athlon 660/661 is valid. */
159 if ((c->x86_model == 6) && ((c->x86_mask == 0) ||
160 (c->x86_mask == 1)))
161 goto valid_k7;
162
163 /* Duron 670 is valid */
164 if ((c->x86_model == 7) && (c->x86_mask == 0))
165 goto valid_k7;
166
167 /*
168 * Athlon 662, Duron 671, and Athlon >model 7 have capability
169 * bit. It's worth noting that the A5 stepping (662) of some
170 * Athlon XP's have the MP bit set.
171 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
172 * more.
173 */
174 if (((c->x86_model == 6) && (c->x86_mask >= 2)) ||
175 ((c->x86_model == 7) && (c->x86_mask >= 1)) ||
176 (c->x86_model > 7))
177 if (cpu_has_mp)
178 goto valid_k7;
179
180 /* If we get here, not a certified SMP capable AMD system. */
181
182 /*
183 * Don't taint if we are running SMP kernel on a single non-MP
184 * approved Athlon
185 */
186 WARN_ONCE(1, "WARNING: This combination of AMD"
187 " processors is not suitable for SMP.\n");
188 if (!test_taint(TAINT_UNSAFE_SMP))
189 add_taint(TAINT_UNSAFE_SMP);
190
191valid_k7:
192 ;
193#endif
194}
195
196static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
197{
198 u32 l, h;
199
200 /*
201 * Bit 15 of Athlon specific MSR 15, needs to be 0
202 * to enable SSE on Palomino/Morgan/Barton CPU's.
203 * If the BIOS didn't enable it already, enable it here.
204 */
205 if (c->x86_model >= 6 && c->x86_model <= 10) {
206 if (!cpu_has(c, X86_FEATURE_XMM)) {
207 printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
208 rdmsr(MSR_K7_HWCR, l, h);
209 l &= ~0x00008000;
210 wrmsr(MSR_K7_HWCR, l, h);
211 set_cpu_cap(c, X86_FEATURE_XMM);
212 }
213 }
214
215 /*
216 * It's been determined by AMD that Athlons since model 8 stepping 1
217 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
218 * As per AMD technical note 27212 0.2
219 */
220 if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
221 rdmsr(MSR_K7_CLK_CTL, l, h);
222 if ((l & 0xfff00000) != 0x20000000) {
223 printk(KERN_INFO
224 "CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
225 l, ((l & 0x000fffff)|0x20000000));
226 wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
227 }
228 }
229
230 set_cpu_cap(c, X86_FEATURE_K7);
231
232 amd_k7_smp_check(c);
233}
234#endif
235
236#ifdef CONFIG_NUMA
237/*
238 * To workaround broken NUMA config. Read the comment in
239 * srat_detect_node().
240 */
241static int __cpuinit nearby_node(int apicid)
242{
243 int i, node;
244
245 for (i = apicid - 1; i >= 0; i--) {
246 node = __apicid_to_node[i];
247 if (node != NUMA_NO_NODE && node_online(node))
248 return node;
249 }
250 for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
251 node = __apicid_to_node[i];
252 if (node != NUMA_NO_NODE && node_online(node))
253 return node;
254 }
255 return first_node(node_online_map); /* Shouldn't happen */
256}
257#endif
258
259/*
260 * Fixup core topology information for
261 * (1) AMD multi-node processors
262 * Assumption: Number of cores in each internal node is the same.
263 * (2) AMD processors supporting compute units
264 */
265#ifdef CONFIG_X86_HT
266static void __cpuinit amd_get_topology(struct cpuinfo_x86 *c)
267{
268 u32 nodes, cores_per_cu = 1;
269 u8 node_id;
270 int cpu = smp_processor_id();
271
272 /* get information required for multi-node processors */
273 if (cpu_has(c, X86_FEATURE_TOPOEXT)) {
274 u32 eax, ebx, ecx, edx;
275
276 cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
277 nodes = ((ecx >> 8) & 7) + 1;
278 node_id = ecx & 7;
279
280 /* get compute unit information */
281 smp_num_siblings = ((ebx >> 8) & 3) + 1;
282 c->compute_unit_id = ebx & 0xff;
283 cores_per_cu += ((ebx >> 8) & 3);
284 } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
285 u64 value;
286
287 rdmsrl(MSR_FAM10H_NODE_ID, value);
288 nodes = ((value >> 3) & 7) + 1;
289 node_id = value & 7;
290 } else
291 return;
292
293 /* fixup multi-node processor information */
294 if (nodes > 1) {
295 u32 cores_per_node;
296 u32 cus_per_node;
297
298 set_cpu_cap(c, X86_FEATURE_AMD_DCM);
299 cores_per_node = c->x86_max_cores / nodes;
300 cus_per_node = cores_per_node / cores_per_cu;
301
302 /* store NodeID, use llc_shared_map to store sibling info */
303 per_cpu(cpu_llc_id, cpu) = node_id;
304
305 /* core id has to be in the [0 .. cores_per_node - 1] range */
306 c->cpu_core_id %= cores_per_node;
307 c->compute_unit_id %= cus_per_node;
308 }
309}
310#endif
311
312/*
313 * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
314 * Assumes number of cores is a power of two.
315 */
316static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
317{
318#ifdef CONFIG_X86_HT
319 unsigned bits;
320 int cpu = smp_processor_id();
321
322 bits = c->x86_coreid_bits;
323 /* Low order bits define the core id (index of core in socket) */
324 c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
325 /* Convert the initial APIC ID into the socket ID */
326 c->phys_proc_id = c->initial_apicid >> bits;
327 /* use socket ID also for last level cache */
328 per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
329 amd_get_topology(c);
330#endif
331}
332
333int amd_get_nb_id(int cpu)
334{
335 int id = 0;
336#ifdef CONFIG_SMP
337 id = per_cpu(cpu_llc_id, cpu);
338#endif
339 return id;
340}
341EXPORT_SYMBOL_GPL(amd_get_nb_id);
342
343static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
344{
345#ifdef CONFIG_NUMA
346 int cpu = smp_processor_id();
347 int node;
348 unsigned apicid = c->apicid;
349
350 node = numa_cpu_node(cpu);
351 if (node == NUMA_NO_NODE)
352 node = per_cpu(cpu_llc_id, cpu);
353
354 if (!node_online(node)) {
355 /*
356 * Two possibilities here:
357 *
358 * - The CPU is missing memory and no node was created. In
359 * that case try picking one from a nearby CPU.
360 *
361 * - The APIC IDs differ from the HyperTransport node IDs
362 * which the K8 northbridge parsing fills in. Assume
363 * they are all increased by a constant offset, but in
364 * the same order as the HT nodeids. If that doesn't
365 * result in a usable node fall back to the path for the
366 * previous case.
367 *
368 * This workaround operates directly on the mapping between
369 * APIC ID and NUMA node, assuming certain relationship
370 * between APIC ID, HT node ID and NUMA topology. As going
371 * through CPU mapping may alter the outcome, directly
372 * access __apicid_to_node[].
373 */
374 int ht_nodeid = c->initial_apicid;
375
376 if (ht_nodeid >= 0 &&
377 __apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
378 node = __apicid_to_node[ht_nodeid];
379 /* Pick a nearby node */
380 if (!node_online(node))
381 node = nearby_node(apicid);
382 }
383 numa_set_node(cpu, node);
384#endif
385}
386
387static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
388{
389#ifdef CONFIG_X86_HT
390 unsigned bits, ecx;
391
392 /* Multi core CPU? */
393 if (c->extended_cpuid_level < 0x80000008)
394 return;
395
396 ecx = cpuid_ecx(0x80000008);
397
398 c->x86_max_cores = (ecx & 0xff) + 1;
399
400 /* CPU telling us the core id bits shift? */
401 bits = (ecx >> 12) & 0xF;
402
403 /* Otherwise recompute */
404 if (bits == 0) {
405 while ((1 << bits) < c->x86_max_cores)
406 bits++;
407 }
408
409 c->x86_coreid_bits = bits;
410#endif
411}
412
413static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
414{
415 early_init_amd_mc(c);
416
417 /*
418 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
419 * with P/T states and does not stop in deep C-states
420 */
421 if (c->x86_power & (1 << 8)) {
422 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
423 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
424 }
425
426#ifdef CONFIG_X86_64
427 set_cpu_cap(c, X86_FEATURE_SYSCALL32);
428#else
429 /* Set MTRR capability flag if appropriate */
430 if (c->x86 == 5)
431 if (c->x86_model == 13 || c->x86_model == 9 ||
432 (c->x86_model == 8 && c->x86_mask >= 8))
433 set_cpu_cap(c, X86_FEATURE_K6_MTRR);
434#endif
435#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
436 /* check CPU config space for extended APIC ID */
437 if (cpu_has_apic && c->x86 >= 0xf) {
438 unsigned int val;
439 val = read_pci_config(0, 24, 0, 0x68);
440 if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
441 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
442 }
443#endif
444
445 /* We need to do the following only once */
446 if (c != &boot_cpu_data)
447 return;
448
449 if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
450
451 if (c->x86 > 0x10 ||
452 (c->x86 == 0x10 && c->x86_model >= 0x2)) {
453 u64 val;
454
455 rdmsrl(MSR_K7_HWCR, val);
456 if (!(val & BIT(24)))
457 printk(KERN_WARNING FW_BUG "TSC doesn't count "
458 "with P0 frequency!\n");
459 }
460 }
461}
462
463static void __cpuinit init_amd(struct cpuinfo_x86 *c)
464{
465#ifdef CONFIG_SMP
466 unsigned long long value;
467
468 /*
469 * Disable TLB flush filter by setting HWCR.FFDIS on K8
470 * bit 6 of msr C001_0015
471 *
472 * Errata 63 for SH-B3 steppings
473 * Errata 122 for all steppings (F+ have it disabled by default)
474 */
475 if (c->x86 == 0xf) {
476 rdmsrl(MSR_K7_HWCR, value);
477 value |= 1 << 6;
478 wrmsrl(MSR_K7_HWCR, value);
479 }
480#endif
481
482 early_init_amd(c);
483
484 /*
485 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
486 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
487 */
488 clear_cpu_cap(c, 0*32+31);
489
490#ifdef CONFIG_X86_64
491 /* On C+ stepping K8 rep microcode works well for copy/memset */
492 if (c->x86 == 0xf) {
493 u32 level;
494
495 level = cpuid_eax(1);
496 if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
497 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
498
499 /*
500 * Some BIOSes incorrectly force this feature, but only K8
501 * revision D (model = 0x14) and later actually support it.
502 * (AMD Erratum #110, docId: 25759).
503 */
504 if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) {
505 u64 val;
506
507 clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
508 if (!rdmsrl_amd_safe(0xc001100d, &val)) {
509 val &= ~(1ULL << 32);
510 wrmsrl_amd_safe(0xc001100d, val);
511 }
512 }
513
514 }
515 if (c->x86 >= 0x10)
516 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
517
518 /* get apicid instead of initial apic id from cpuid */
519 c->apicid = hard_smp_processor_id();
520#else
521
522 /*
523 * FIXME: We should handle the K5 here. Set up the write
524 * range and also turn on MSR 83 bits 4 and 31 (write alloc,
525 * no bus pipeline)
526 */
527
528 switch (c->x86) {
529 case 4:
530 init_amd_k5(c);
531 break;
532 case 5:
533 init_amd_k6(c);
534 break;
535 case 6: /* An Athlon/Duron */
536 init_amd_k7(c);
537 break;
538 }
539
540 /* K6s reports MCEs but don't actually have all the MSRs */
541 if (c->x86 < 6)
542 clear_cpu_cap(c, X86_FEATURE_MCE);
543#endif
544
545 /* Enable workaround for FXSAVE leak */
546 if (c->x86 >= 6)
547 set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
548
549 if (!c->x86_model_id[0]) {
550 switch (c->x86) {
551 case 0xf:
552 /* Should distinguish Models here, but this is only
553 a fallback anyways. */
554 strcpy(c->x86_model_id, "Hammer");
555 break;
556 }
557 }
558
559 cpu_detect_cache_sizes(c);
560
561 /* Multi core CPU? */
562 if (c->extended_cpuid_level >= 0x80000008) {
563 amd_detect_cmp(c);
564 srat_detect_node(c);
565 }
566
567#ifdef CONFIG_X86_32
568 detect_ht(c);
569#endif
570
571 if (c->extended_cpuid_level >= 0x80000006) {
572 if (cpuid_edx(0x80000006) & 0xf000)
573 num_cache_leaves = 4;
574 else
575 num_cache_leaves = 3;
576 }
577
578 if (c->x86 >= 0xf)
579 set_cpu_cap(c, X86_FEATURE_K8);
580
581 if (cpu_has_xmm2) {
582 /* MFENCE stops RDTSC speculation */
583 set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
584 }
585
586#ifdef CONFIG_X86_64
587 if (c->x86 == 0x10) {
588 /* do this for boot cpu */
589 if (c == &boot_cpu_data)
590 check_enable_amd_mmconf_dmi();
591
592 fam10h_check_enable_mmcfg();
593 }
594
595 if (c == &boot_cpu_data && c->x86 >= 0xf) {
596 unsigned long long tseg;
597
598 /*
599 * Split up direct mapping around the TSEG SMM area.
600 * Don't do it for gbpages because there seems very little
601 * benefit in doing so.
602 */
603 if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
604 printk(KERN_DEBUG "tseg: %010llx\n", tseg);
605 if ((tseg>>PMD_SHIFT) <
606 (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
607 ((tseg>>PMD_SHIFT) <
608 (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
609 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
610 set_memory_4k((unsigned long)__va(tseg), 1);
611 }
612 }
613#endif
614
615 /*
616 * Family 0x12 and above processors have APIC timer
617 * running in deep C states.
618 */
619 if (c->x86 > 0x11)
620 set_cpu_cap(c, X86_FEATURE_ARAT);
621
622 /*
623 * Disable GART TLB Walk Errors on Fam10h. We do this here
624 * because this is always needed when GART is enabled, even in a
625 * kernel which has no MCE support built in.
626 */
627 if (c->x86 == 0x10) {
628 /*
629 * BIOS should disable GartTlbWlk Errors themself. If
630 * it doesn't do it here as suggested by the BKDG.
631 *
632 * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012
633 */
634 u64 mask;
635 int err;
636
637 err = rdmsrl_safe(MSR_AMD64_MCx_MASK(4), &mask);
638 if (err == 0) {
639 mask |= (1 << 10);
640 checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask);
641 }
642 }
643}
644
645#ifdef CONFIG_X86_32
646static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c,
647 unsigned int size)
648{
649 /* AMD errata T13 (order #21922) */
650 if ((c->x86 == 6)) {
651 /* Duron Rev A0 */
652 if (c->x86_model == 3 && c->x86_mask == 0)
653 size = 64;
654 /* Tbird rev A1/A2 */
655 if (c->x86_model == 4 &&
656 (c->x86_mask == 0 || c->x86_mask == 1))
657 size = 256;
658 }
659 return size;
660}
661#endif
662
663static const struct cpu_dev __cpuinitconst amd_cpu_dev = {
664 .c_vendor = "AMD",
665 .c_ident = { "AuthenticAMD" },
666#ifdef CONFIG_X86_32
667 .c_models = {
668 { .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
669 {
670 [3] = "486 DX/2",
671 [7] = "486 DX/2-WB",
672 [8] = "486 DX/4",
673 [9] = "486 DX/4-WB",
674 [14] = "Am5x86-WT",
675 [15] = "Am5x86-WB"
676 }
677 },
678 },
679 .c_size_cache = amd_size_cache,
680#endif
681 .c_early_init = early_init_amd,
682 .c_init = init_amd,
683 .c_x86_vendor = X86_VENDOR_AMD,
684};
685
686cpu_dev_register(amd_cpu_dev);
687
688/*
689 * AMD errata checking
690 *
691 * Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or
692 * AMD_OSVW_ERRATUM() macros. The latter is intended for newer errata that
693 * have an OSVW id assigned, which it takes as first argument. Both take a
694 * variable number of family-specific model-stepping ranges created by
695 * AMD_MODEL_RANGE(). Each erratum also has to be declared as extern const
696 * int[] in arch/x86/include/asm/processor.h.
697 *
698 * Example:
699 *
700 * const int amd_erratum_319[] =
701 * AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0x4, 0x2),
702 * AMD_MODEL_RANGE(0x10, 0x8, 0x0, 0x8, 0x0),
703 * AMD_MODEL_RANGE(0x10, 0x9, 0x0, 0x9, 0x0));
704 */
705
706const int amd_erratum_400[] =
707 AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
708 AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
709EXPORT_SYMBOL_GPL(amd_erratum_400);
710
711const int amd_erratum_383[] =
712 AMD_OSVW_ERRATUM(3, AMD_MODEL_RANGE(0x10, 0, 0, 0xff, 0xf));
713EXPORT_SYMBOL_GPL(amd_erratum_383);
714
715bool cpu_has_amd_erratum(const int *erratum)
716{
717 struct cpuinfo_x86 *cpu = __this_cpu_ptr(&cpu_info);
718 int osvw_id = *erratum++;
719 u32 range;
720 u32 ms;
721
722 /*
723 * If called early enough that current_cpu_data hasn't been initialized
724 * yet, fall back to boot_cpu_data.
725 */
726 if (cpu->x86 == 0)
727 cpu = &boot_cpu_data;
728
729 if (cpu->x86_vendor != X86_VENDOR_AMD)
730 return false;
731
732 if (osvw_id >= 0 && osvw_id < 65536 &&
733 cpu_has(cpu, X86_FEATURE_OSVW)) {
734 u64 osvw_len;
735
736 rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, osvw_len);
737 if (osvw_id < osvw_len) {
738 u64 osvw_bits;
739
740 rdmsrl(MSR_AMD64_OSVW_STATUS + (osvw_id >> 6),
741 osvw_bits);
742 return osvw_bits & (1ULL << (osvw_id & 0x3f));
743 }
744 }
745
746 /* OSVW unavailable or ID unknown, match family-model-stepping range */
747 ms = (cpu->x86_model << 4) | cpu->x86_mask;
748 while ((range = *erratum++))
749 if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
750 (ms >= AMD_MODEL_RANGE_START(range)) &&
751 (ms <= AMD_MODEL_RANGE_END(range)))
752 return true;
753
754 return false;
755}
756
757EXPORT_SYMBOL_GPL(cpu_has_amd_erratum);
1// SPDX-License-Identifier: GPL-2.0-only
2#include <linux/export.h>
3#include <linux/bitops.h>
4#include <linux/elf.h>
5#include <linux/mm.h>
6
7#include <linux/io.h>
8#include <linux/sched.h>
9#include <linux/sched/clock.h>
10#include <linux/random.h>
11#include <linux/topology.h>
12#include <asm/processor.h>
13#include <asm/apic.h>
14#include <asm/cacheinfo.h>
15#include <asm/cpu.h>
16#include <asm/spec-ctrl.h>
17#include <asm/smp.h>
18#include <asm/numa.h>
19#include <asm/pci-direct.h>
20#include <asm/delay.h>
21#include <asm/debugreg.h>
22#include <asm/resctrl.h>
23#include <asm/sev.h>
24
25#ifdef CONFIG_X86_64
26# include <asm/mmconfig.h>
27#endif
28
29#include "cpu.h"
30
31static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
32{
33 u32 gprs[8] = { 0 };
34 int err;
35
36 WARN_ONCE((boot_cpu_data.x86 != 0xf),
37 "%s should only be used on K8!\n", __func__);
38
39 gprs[1] = msr;
40 gprs[7] = 0x9c5a203a;
41
42 err = rdmsr_safe_regs(gprs);
43
44 *p = gprs[0] | ((u64)gprs[2] << 32);
45
46 return err;
47}
48
49static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
50{
51 u32 gprs[8] = { 0 };
52
53 WARN_ONCE((boot_cpu_data.x86 != 0xf),
54 "%s should only be used on K8!\n", __func__);
55
56 gprs[0] = (u32)val;
57 gprs[1] = msr;
58 gprs[2] = val >> 32;
59 gprs[7] = 0x9c5a203a;
60
61 return wrmsr_safe_regs(gprs);
62}
63
64/*
65 * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
66 * misexecution of code under Linux. Owners of such processors should
67 * contact AMD for precise details and a CPU swap.
68 *
69 * See http://www.multimania.com/poulot/k6bug.html
70 * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
71 * (Publication # 21266 Issue Date: August 1998)
72 *
73 * The following test is erm.. interesting. AMD neglected to up
74 * the chip setting when fixing the bug but they also tweaked some
75 * performance at the same time..
76 */
77
78#ifdef CONFIG_X86_32
79extern __visible void vide(void);
80__asm__(".text\n"
81 ".globl vide\n"
82 ".type vide, @function\n"
83 ".align 4\n"
84 "vide: ret\n");
85#endif
86
87static void init_amd_k5(struct cpuinfo_x86 *c)
88{
89#ifdef CONFIG_X86_32
90/*
91 * General Systems BIOSen alias the cpu frequency registers
92 * of the Elan at 0x000df000. Unfortunately, one of the Linux
93 * drivers subsequently pokes it, and changes the CPU speed.
94 * Workaround : Remove the unneeded alias.
95 */
96#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
97#define CBAR_ENB (0x80000000)
98#define CBAR_KEY (0X000000CB)
99 if (c->x86_model == 9 || c->x86_model == 10) {
100 if (inl(CBAR) & CBAR_ENB)
101 outl(0 | CBAR_KEY, CBAR);
102 }
103#endif
104}
105
106static void init_amd_k6(struct cpuinfo_x86 *c)
107{
108#ifdef CONFIG_X86_32
109 u32 l, h;
110 int mbytes = get_num_physpages() >> (20-PAGE_SHIFT);
111
112 if (c->x86_model < 6) {
113 /* Based on AMD doc 20734R - June 2000 */
114 if (c->x86_model == 0) {
115 clear_cpu_cap(c, X86_FEATURE_APIC);
116 set_cpu_cap(c, X86_FEATURE_PGE);
117 }
118 return;
119 }
120
121 if (c->x86_model == 6 && c->x86_stepping == 1) {
122 const int K6_BUG_LOOP = 1000000;
123 int n;
124 void (*f_vide)(void);
125 u64 d, d2;
126
127 pr_info("AMD K6 stepping B detected - ");
128
129 /*
130 * It looks like AMD fixed the 2.6.2 bug and improved indirect
131 * calls at the same time.
132 */
133
134 n = K6_BUG_LOOP;
135 f_vide = vide;
136 OPTIMIZER_HIDE_VAR(f_vide);
137 d = rdtsc();
138 while (n--)
139 f_vide();
140 d2 = rdtsc();
141 d = d2-d;
142
143 if (d > 20*K6_BUG_LOOP)
144 pr_cont("system stability may be impaired when more than 32 MB are used.\n");
145 else
146 pr_cont("probably OK (after B9730xxxx).\n");
147 }
148
149 /* K6 with old style WHCR */
150 if (c->x86_model < 8 ||
151 (c->x86_model == 8 && c->x86_stepping < 8)) {
152 /* We can only write allocate on the low 508Mb */
153 if (mbytes > 508)
154 mbytes = 508;
155
156 rdmsr(MSR_K6_WHCR, l, h);
157 if ((l&0x0000FFFF) == 0) {
158 unsigned long flags;
159 l = (1<<0)|((mbytes/4)<<1);
160 local_irq_save(flags);
161 wbinvd();
162 wrmsr(MSR_K6_WHCR, l, h);
163 local_irq_restore(flags);
164 pr_info("Enabling old style K6 write allocation for %d Mb\n",
165 mbytes);
166 }
167 return;
168 }
169
170 if ((c->x86_model == 8 && c->x86_stepping > 7) ||
171 c->x86_model == 9 || c->x86_model == 13) {
172 /* The more serious chips .. */
173
174 if (mbytes > 4092)
175 mbytes = 4092;
176
177 rdmsr(MSR_K6_WHCR, l, h);
178 if ((l&0xFFFF0000) == 0) {
179 unsigned long flags;
180 l = ((mbytes>>2)<<22)|(1<<16);
181 local_irq_save(flags);
182 wbinvd();
183 wrmsr(MSR_K6_WHCR, l, h);
184 local_irq_restore(flags);
185 pr_info("Enabling new style K6 write allocation for %d Mb\n",
186 mbytes);
187 }
188
189 return;
190 }
191
192 if (c->x86_model == 10) {
193 /* AMD Geode LX is model 10 */
194 /* placeholder for any needed mods */
195 return;
196 }
197#endif
198}
199
200static void init_amd_k7(struct cpuinfo_x86 *c)
201{
202#ifdef CONFIG_X86_32
203 u32 l, h;
204
205 /*
206 * Bit 15 of Athlon specific MSR 15, needs to be 0
207 * to enable SSE on Palomino/Morgan/Barton CPU's.
208 * If the BIOS didn't enable it already, enable it here.
209 */
210 if (c->x86_model >= 6 && c->x86_model <= 10) {
211 if (!cpu_has(c, X86_FEATURE_XMM)) {
212 pr_info("Enabling disabled K7/SSE Support.\n");
213 msr_clear_bit(MSR_K7_HWCR, 15);
214 set_cpu_cap(c, X86_FEATURE_XMM);
215 }
216 }
217
218 /*
219 * It's been determined by AMD that Athlons since model 8 stepping 1
220 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
221 * As per AMD technical note 27212 0.2
222 */
223 if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) {
224 rdmsr(MSR_K7_CLK_CTL, l, h);
225 if ((l & 0xfff00000) != 0x20000000) {
226 pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
227 l, ((l & 0x000fffff)|0x20000000));
228 wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
229 }
230 }
231
232 /* calling is from identify_secondary_cpu() ? */
233 if (!c->cpu_index)
234 return;
235
236 /*
237 * Certain Athlons might work (for various values of 'work') in SMP
238 * but they are not certified as MP capable.
239 */
240 /* Athlon 660/661 is valid. */
241 if ((c->x86_model == 6) && ((c->x86_stepping == 0) ||
242 (c->x86_stepping == 1)))
243 return;
244
245 /* Duron 670 is valid */
246 if ((c->x86_model == 7) && (c->x86_stepping == 0))
247 return;
248
249 /*
250 * Athlon 662, Duron 671, and Athlon >model 7 have capability
251 * bit. It's worth noting that the A5 stepping (662) of some
252 * Athlon XP's have the MP bit set.
253 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
254 * more.
255 */
256 if (((c->x86_model == 6) && (c->x86_stepping >= 2)) ||
257 ((c->x86_model == 7) && (c->x86_stepping >= 1)) ||
258 (c->x86_model > 7))
259 if (cpu_has(c, X86_FEATURE_MP))
260 return;
261
262 /* If we get here, not a certified SMP capable AMD system. */
263
264 /*
265 * Don't taint if we are running SMP kernel on a single non-MP
266 * approved Athlon
267 */
268 WARN_ONCE(1, "WARNING: This combination of AMD"
269 " processors is not suitable for SMP.\n");
270 add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE);
271#endif
272}
273
274#ifdef CONFIG_NUMA
275/*
276 * To workaround broken NUMA config. Read the comment in
277 * srat_detect_node().
278 */
279static int nearby_node(int apicid)
280{
281 int i, node;
282
283 for (i = apicid - 1; i >= 0; i--) {
284 node = __apicid_to_node[i];
285 if (node != NUMA_NO_NODE && node_online(node))
286 return node;
287 }
288 for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
289 node = __apicid_to_node[i];
290 if (node != NUMA_NO_NODE && node_online(node))
291 return node;
292 }
293 return first_node(node_online_map); /* Shouldn't happen */
294}
295#endif
296
297static void srat_detect_node(struct cpuinfo_x86 *c)
298{
299#ifdef CONFIG_NUMA
300 int cpu = smp_processor_id();
301 int node;
302 unsigned apicid = c->topo.apicid;
303
304 node = numa_cpu_node(cpu);
305 if (node == NUMA_NO_NODE)
306 node = per_cpu_llc_id(cpu);
307
308 /*
309 * On multi-fabric platform (e.g. Numascale NumaChip) a
310 * platform-specific handler needs to be called to fixup some
311 * IDs of the CPU.
312 */
313 if (x86_cpuinit.fixup_cpu_id)
314 x86_cpuinit.fixup_cpu_id(c, node);
315
316 if (!node_online(node)) {
317 /*
318 * Two possibilities here:
319 *
320 * - The CPU is missing memory and no node was created. In
321 * that case try picking one from a nearby CPU.
322 *
323 * - The APIC IDs differ from the HyperTransport node IDs
324 * which the K8 northbridge parsing fills in. Assume
325 * they are all increased by a constant offset, but in
326 * the same order as the HT nodeids. If that doesn't
327 * result in a usable node fall back to the path for the
328 * previous case.
329 *
330 * This workaround operates directly on the mapping between
331 * APIC ID and NUMA node, assuming certain relationship
332 * between APIC ID, HT node ID and NUMA topology. As going
333 * through CPU mapping may alter the outcome, directly
334 * access __apicid_to_node[].
335 */
336 int ht_nodeid = c->topo.initial_apicid;
337
338 if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
339 node = __apicid_to_node[ht_nodeid];
340 /* Pick a nearby node */
341 if (!node_online(node))
342 node = nearby_node(apicid);
343 }
344 numa_set_node(cpu, node);
345#endif
346}
347
348static void bsp_determine_snp(struct cpuinfo_x86 *c)
349{
350#ifdef CONFIG_ARCH_HAS_CC_PLATFORM
351 cc_vendor = CC_VENDOR_AMD;
352
353 if (cpu_has(c, X86_FEATURE_SEV_SNP)) {
354 /*
355 * RMP table entry format is not architectural and is defined by the
356 * per-processor PPR. Restrict SNP support on the known CPU models
357 * for which the RMP table entry format is currently defined for.
358 */
359 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) &&
360 c->x86 >= 0x19 && snp_probe_rmptable_info()) {
361 cc_platform_set(CC_ATTR_HOST_SEV_SNP);
362 } else {
363 setup_clear_cpu_cap(X86_FEATURE_SEV_SNP);
364 cc_platform_clear(CC_ATTR_HOST_SEV_SNP);
365 }
366 }
367#endif
368}
369
370static void bsp_init_amd(struct cpuinfo_x86 *c)
371{
372 if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
373
374 if (c->x86 > 0x10 ||
375 (c->x86 == 0x10 && c->x86_model >= 0x2)) {
376 u64 val;
377
378 rdmsrl(MSR_K7_HWCR, val);
379 if (!(val & BIT(24)))
380 pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
381 }
382 }
383
384 if (c->x86 == 0x15) {
385 unsigned long upperbit;
386 u32 cpuid, assoc;
387
388 cpuid = cpuid_edx(0x80000005);
389 assoc = cpuid >> 16 & 0xff;
390 upperbit = ((cpuid >> 24) << 10) / assoc;
391
392 va_align.mask = (upperbit - 1) & PAGE_MASK;
393 va_align.flags = ALIGN_VA_32 | ALIGN_VA_64;
394
395 /* A random value per boot for bit slice [12:upper_bit) */
396 va_align.bits = get_random_u32() & va_align.mask;
397 }
398
399 if (cpu_has(c, X86_FEATURE_MWAITX))
400 use_mwaitx_delay();
401
402 if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
403 !boot_cpu_has(X86_FEATURE_VIRT_SSBD) &&
404 c->x86 >= 0x15 && c->x86 <= 0x17) {
405 unsigned int bit;
406
407 switch (c->x86) {
408 case 0x15: bit = 54; break;
409 case 0x16: bit = 33; break;
410 case 0x17: bit = 10; break;
411 default: return;
412 }
413 /*
414 * Try to cache the base value so further operations can
415 * avoid RMW. If that faults, do not enable SSBD.
416 */
417 if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) {
418 setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD);
419 setup_force_cpu_cap(X86_FEATURE_SSBD);
420 x86_amd_ls_cfg_ssbd_mask = 1ULL << bit;
421 }
422 }
423
424 resctrl_cpu_detect(c);
425
426 /* Figure out Zen generations: */
427 switch (c->x86) {
428 case 0x17:
429 switch (c->x86_model) {
430 case 0x00 ... 0x2f:
431 case 0x50 ... 0x5f:
432 setup_force_cpu_cap(X86_FEATURE_ZEN1);
433 break;
434 case 0x30 ... 0x4f:
435 case 0x60 ... 0x7f:
436 case 0x90 ... 0x91:
437 case 0xa0 ... 0xaf:
438 setup_force_cpu_cap(X86_FEATURE_ZEN2);
439 break;
440 default:
441 goto warn;
442 }
443 break;
444
445 case 0x19:
446 switch (c->x86_model) {
447 case 0x00 ... 0x0f:
448 case 0x20 ... 0x5f:
449 setup_force_cpu_cap(X86_FEATURE_ZEN3);
450 break;
451 case 0x10 ... 0x1f:
452 case 0x60 ... 0xaf:
453 setup_force_cpu_cap(X86_FEATURE_ZEN4);
454 break;
455 default:
456 goto warn;
457 }
458 break;
459
460 case 0x1a:
461 switch (c->x86_model) {
462 case 0x00 ... 0x2f:
463 case 0x40 ... 0x4f:
464 case 0x70 ... 0x7f:
465 setup_force_cpu_cap(X86_FEATURE_ZEN5);
466 break;
467 default:
468 goto warn;
469 }
470 break;
471
472 default:
473 break;
474 }
475
476 bsp_determine_snp(c);
477 return;
478
479warn:
480 WARN_ONCE(1, "Family 0x%x, model: 0x%x??\n", c->x86, c->x86_model);
481}
482
483static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
484{
485 u64 msr;
486
487 /*
488 * BIOS support is required for SME and SEV.
489 * For SME: If BIOS has enabled SME then adjust x86_phys_bits by
490 * the SME physical address space reduction value.
491 * If BIOS has not enabled SME then don't advertise the
492 * SME feature (set in scattered.c).
493 * If the kernel has not enabled SME via any means then
494 * don't advertise the SME feature.
495 * For SEV: If BIOS has not enabled SEV then don't advertise SEV and
496 * any additional functionality based on it.
497 *
498 * In all cases, since support for SME and SEV requires long mode,
499 * don't advertise the feature under CONFIG_X86_32.
500 */
501 if (cpu_has(c, X86_FEATURE_SME) || cpu_has(c, X86_FEATURE_SEV)) {
502 /* Check if memory encryption is enabled */
503 rdmsrl(MSR_AMD64_SYSCFG, msr);
504 if (!(msr & MSR_AMD64_SYSCFG_MEM_ENCRYPT))
505 goto clear_all;
506
507 /*
508 * Always adjust physical address bits. Even though this
509 * will be a value above 32-bits this is still done for
510 * CONFIG_X86_32 so that accurate values are reported.
511 */
512 c->x86_phys_bits -= (cpuid_ebx(0x8000001f) >> 6) & 0x3f;
513
514 if (IS_ENABLED(CONFIG_X86_32))
515 goto clear_all;
516
517 if (!sme_me_mask)
518 setup_clear_cpu_cap(X86_FEATURE_SME);
519
520 rdmsrl(MSR_K7_HWCR, msr);
521 if (!(msr & MSR_K7_HWCR_SMMLOCK))
522 goto clear_sev;
523
524 return;
525
526clear_all:
527 setup_clear_cpu_cap(X86_FEATURE_SME);
528clear_sev:
529 setup_clear_cpu_cap(X86_FEATURE_SEV);
530 setup_clear_cpu_cap(X86_FEATURE_SEV_ES);
531 setup_clear_cpu_cap(X86_FEATURE_SEV_SNP);
532 }
533}
534
535static void early_init_amd(struct cpuinfo_x86 *c)
536{
537 u32 dummy;
538
539 if (c->x86 >= 0xf)
540 set_cpu_cap(c, X86_FEATURE_K8);
541
542 rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
543
544 /*
545 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
546 * with P/T states and does not stop in deep C-states
547 */
548 if (c->x86_power & (1 << 8)) {
549 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
550 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
551 }
552
553 /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */
554 if (c->x86_power & BIT(12))
555 set_cpu_cap(c, X86_FEATURE_ACC_POWER);
556
557 /* Bit 14 indicates the Runtime Average Power Limit interface. */
558 if (c->x86_power & BIT(14))
559 set_cpu_cap(c, X86_FEATURE_RAPL);
560
561#ifdef CONFIG_X86_64
562 set_cpu_cap(c, X86_FEATURE_SYSCALL32);
563#else
564 /* Set MTRR capability flag if appropriate */
565 if (c->x86 == 5)
566 if (c->x86_model == 13 || c->x86_model == 9 ||
567 (c->x86_model == 8 && c->x86_stepping >= 8))
568 set_cpu_cap(c, X86_FEATURE_K6_MTRR);
569#endif
570#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
571 /*
572 * ApicID can always be treated as an 8-bit value for AMD APIC versions
573 * >= 0x10, but even old K8s came out of reset with version 0x10. So, we
574 * can safely set X86_FEATURE_EXTD_APICID unconditionally for families
575 * after 16h.
576 */
577 if (boot_cpu_has(X86_FEATURE_APIC)) {
578 if (c->x86 > 0x16)
579 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
580 else if (c->x86 >= 0xf) {
581 /* check CPU config space for extended APIC ID */
582 unsigned int val;
583
584 val = read_pci_config(0, 24, 0, 0x68);
585 if ((val >> 17 & 0x3) == 0x3)
586 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
587 }
588 }
589#endif
590
591 /*
592 * This is only needed to tell the kernel whether to use VMCALL
593 * and VMMCALL. VMMCALL is never executed except under virt, so
594 * we can set it unconditionally.
595 */
596 set_cpu_cap(c, X86_FEATURE_VMMCALL);
597
598 /* F16h erratum 793, CVE-2013-6885 */
599 if (c->x86 == 0x16 && c->x86_model <= 0xf)
600 msr_set_bit(MSR_AMD64_LS_CFG, 15);
601
602 early_detect_mem_encrypt(c);
603
604 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_IBPB_BRTYPE)) {
605 if (c->x86 == 0x17 && boot_cpu_has(X86_FEATURE_AMD_IBPB))
606 setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE);
607 else if (c->x86 >= 0x19 && !wrmsrl_safe(MSR_IA32_PRED_CMD, PRED_CMD_SBPB)) {
608 setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE);
609 setup_force_cpu_cap(X86_FEATURE_SBPB);
610 }
611 }
612}
613
614static void init_amd_k8(struct cpuinfo_x86 *c)
615{
616 u32 level;
617 u64 value;
618
619 /* On C+ stepping K8 rep microcode works well for copy/memset */
620 level = cpuid_eax(1);
621 if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
622 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
623
624 /*
625 * Some BIOSes incorrectly force this feature, but only K8 revision D
626 * (model = 0x14) and later actually support it.
627 * (AMD Erratum #110, docId: 25759).
628 */
629 if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) {
630 clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
631 if (!rdmsrl_amd_safe(0xc001100d, &value)) {
632 value &= ~BIT_64(32);
633 wrmsrl_amd_safe(0xc001100d, value);
634 }
635 }
636
637 if (!c->x86_model_id[0])
638 strcpy(c->x86_model_id, "Hammer");
639
640#ifdef CONFIG_SMP
641 /*
642 * Disable TLB flush filter by setting HWCR.FFDIS on K8
643 * bit 6 of msr C001_0015
644 *
645 * Errata 63 for SH-B3 steppings
646 * Errata 122 for all steppings (F+ have it disabled by default)
647 */
648 msr_set_bit(MSR_K7_HWCR, 6);
649#endif
650 set_cpu_bug(c, X86_BUG_SWAPGS_FENCE);
651
652 /*
653 * Check models and steppings affected by erratum 400. This is
654 * used to select the proper idle routine and to enable the
655 * check whether the machine is affected in arch_post_acpi_subsys_init()
656 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
657 */
658 if (c->x86_model > 0x41 ||
659 (c->x86_model == 0x41 && c->x86_stepping >= 0x2))
660 setup_force_cpu_bug(X86_BUG_AMD_E400);
661}
662
663static void init_amd_gh(struct cpuinfo_x86 *c)
664{
665#ifdef CONFIG_MMCONF_FAM10H
666 /* do this for boot cpu */
667 if (c == &boot_cpu_data)
668 check_enable_amd_mmconf_dmi();
669
670 fam10h_check_enable_mmcfg();
671#endif
672
673 /*
674 * Disable GART TLB Walk Errors on Fam10h. We do this here because this
675 * is always needed when GART is enabled, even in a kernel which has no
676 * MCE support built in. BIOS should disable GartTlbWlk Errors already.
677 * If it doesn't, we do it here as suggested by the BKDG.
678 *
679 * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012
680 */
681 msr_set_bit(MSR_AMD64_MCx_MASK(4), 10);
682
683 /*
684 * On family 10h BIOS may not have properly enabled WC+ support, causing
685 * it to be converted to CD memtype. This may result in performance
686 * degradation for certain nested-paging guests. Prevent this conversion
687 * by clearing bit 24 in MSR_AMD64_BU_CFG2.
688 *
689 * NOTE: we want to use the _safe accessors so as not to #GP kvm
690 * guests on older kvm hosts.
691 */
692 msr_clear_bit(MSR_AMD64_BU_CFG2, 24);
693
694 set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
695
696 /*
697 * Check models and steppings affected by erratum 400. This is
698 * used to select the proper idle routine and to enable the
699 * check whether the machine is affected in arch_post_acpi_subsys_init()
700 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
701 */
702 if (c->x86_model > 0x2 ||
703 (c->x86_model == 0x2 && c->x86_stepping >= 0x1))
704 setup_force_cpu_bug(X86_BUG_AMD_E400);
705}
706
707static void init_amd_ln(struct cpuinfo_x86 *c)
708{
709 /*
710 * Apply erratum 665 fix unconditionally so machines without a BIOS
711 * fix work.
712 */
713 msr_set_bit(MSR_AMD64_DE_CFG, 31);
714}
715
716static bool rdrand_force;
717
718static int __init rdrand_cmdline(char *str)
719{
720 if (!str)
721 return -EINVAL;
722
723 if (!strcmp(str, "force"))
724 rdrand_force = true;
725 else
726 return -EINVAL;
727
728 return 0;
729}
730early_param("rdrand", rdrand_cmdline);
731
732static void clear_rdrand_cpuid_bit(struct cpuinfo_x86 *c)
733{
734 /*
735 * Saving of the MSR used to hide the RDRAND support during
736 * suspend/resume is done by arch/x86/power/cpu.c, which is
737 * dependent on CONFIG_PM_SLEEP.
738 */
739 if (!IS_ENABLED(CONFIG_PM_SLEEP))
740 return;
741
742 /*
743 * The self-test can clear X86_FEATURE_RDRAND, so check for
744 * RDRAND support using the CPUID function directly.
745 */
746 if (!(cpuid_ecx(1) & BIT(30)) || rdrand_force)
747 return;
748
749 msr_clear_bit(MSR_AMD64_CPUID_FN_1, 62);
750
751 /*
752 * Verify that the CPUID change has occurred in case the kernel is
753 * running virtualized and the hypervisor doesn't support the MSR.
754 */
755 if (cpuid_ecx(1) & BIT(30)) {
756 pr_info_once("BIOS may not properly restore RDRAND after suspend, but hypervisor does not support hiding RDRAND via CPUID.\n");
757 return;
758 }
759
760 clear_cpu_cap(c, X86_FEATURE_RDRAND);
761 pr_info_once("BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.\n");
762}
763
764static void init_amd_jg(struct cpuinfo_x86 *c)
765{
766 /*
767 * Some BIOS implementations do not restore proper RDRAND support
768 * across suspend and resume. Check on whether to hide the RDRAND
769 * instruction support via CPUID.
770 */
771 clear_rdrand_cpuid_bit(c);
772}
773
774static void init_amd_bd(struct cpuinfo_x86 *c)
775{
776 u64 value;
777
778 /*
779 * The way access filter has a performance penalty on some workloads.
780 * Disable it on the affected CPUs.
781 */
782 if ((c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
783 if (!rdmsrl_safe(MSR_F15H_IC_CFG, &value) && !(value & 0x1E)) {
784 value |= 0x1E;
785 wrmsrl_safe(MSR_F15H_IC_CFG, value);
786 }
787 }
788
789 /*
790 * Some BIOS implementations do not restore proper RDRAND support
791 * across suspend and resume. Check on whether to hide the RDRAND
792 * instruction support via CPUID.
793 */
794 clear_rdrand_cpuid_bit(c);
795}
796
797static void fix_erratum_1386(struct cpuinfo_x86 *c)
798{
799 /*
800 * Work around Erratum 1386. The XSAVES instruction malfunctions in
801 * certain circumstances on Zen1/2 uarch, and not all parts have had
802 * updated microcode at the time of writing (March 2023).
803 *
804 * Affected parts all have no supervisor XSAVE states, meaning that
805 * the XSAVEC instruction (which works fine) is equivalent.
806 */
807 clear_cpu_cap(c, X86_FEATURE_XSAVES);
808}
809
810void init_spectral_chicken(struct cpuinfo_x86 *c)
811{
812#ifdef CONFIG_MITIGATION_UNRET_ENTRY
813 u64 value;
814
815 /*
816 * On Zen2 we offer this chicken (bit) on the altar of Speculation.
817 *
818 * This suppresses speculation from the middle of a basic block, i.e. it
819 * suppresses non-branch predictions.
820 */
821 if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
822 if (!rdmsrl_safe(MSR_ZEN2_SPECTRAL_CHICKEN, &value)) {
823 value |= MSR_ZEN2_SPECTRAL_CHICKEN_BIT;
824 wrmsrl_safe(MSR_ZEN2_SPECTRAL_CHICKEN, value);
825 }
826 }
827#endif
828}
829
830static void init_amd_zen_common(void)
831{
832 setup_force_cpu_cap(X86_FEATURE_ZEN);
833#ifdef CONFIG_NUMA
834 node_reclaim_distance = 32;
835#endif
836}
837
838static void init_amd_zen1(struct cpuinfo_x86 *c)
839{
840 fix_erratum_1386(c);
841
842 /* Fix up CPUID bits, but only if not virtualised. */
843 if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
844
845 /* Erratum 1076: CPB feature bit not being set in CPUID. */
846 if (!cpu_has(c, X86_FEATURE_CPB))
847 set_cpu_cap(c, X86_FEATURE_CPB);
848 }
849
850 pr_notice_once("AMD Zen1 DIV0 bug detected. Disable SMT for full protection.\n");
851 setup_force_cpu_bug(X86_BUG_DIV0);
852}
853
854static bool cpu_has_zenbleed_microcode(void)
855{
856 u32 good_rev = 0;
857
858 switch (boot_cpu_data.x86_model) {
859 case 0x30 ... 0x3f: good_rev = 0x0830107b; break;
860 case 0x60 ... 0x67: good_rev = 0x0860010c; break;
861 case 0x68 ... 0x6f: good_rev = 0x08608107; break;
862 case 0x70 ... 0x7f: good_rev = 0x08701033; break;
863 case 0xa0 ... 0xaf: good_rev = 0x08a00009; break;
864
865 default:
866 return false;
867 }
868
869 if (boot_cpu_data.microcode < good_rev)
870 return false;
871
872 return true;
873}
874
875static void zen2_zenbleed_check(struct cpuinfo_x86 *c)
876{
877 if (cpu_has(c, X86_FEATURE_HYPERVISOR))
878 return;
879
880 if (!cpu_has(c, X86_FEATURE_AVX))
881 return;
882
883 if (!cpu_has_zenbleed_microcode()) {
884 pr_notice_once("Zenbleed: please update your microcode for the most optimal fix\n");
885 msr_set_bit(MSR_AMD64_DE_CFG, MSR_AMD64_DE_CFG_ZEN2_FP_BACKUP_FIX_BIT);
886 } else {
887 msr_clear_bit(MSR_AMD64_DE_CFG, MSR_AMD64_DE_CFG_ZEN2_FP_BACKUP_FIX_BIT);
888 }
889}
890
891static void init_amd_zen2(struct cpuinfo_x86 *c)
892{
893 init_spectral_chicken(c);
894 fix_erratum_1386(c);
895 zen2_zenbleed_check(c);
896}
897
898static void init_amd_zen3(struct cpuinfo_x86 *c)
899{
900 if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
901 /*
902 * Zen3 (Fam19 model < 0x10) parts are not susceptible to
903 * Branch Type Confusion, but predate the allocation of the
904 * BTC_NO bit.
905 */
906 if (!cpu_has(c, X86_FEATURE_BTC_NO))
907 set_cpu_cap(c, X86_FEATURE_BTC_NO);
908 }
909}
910
911static void init_amd_zen4(struct cpuinfo_x86 *c)
912{
913 if (!cpu_has(c, X86_FEATURE_HYPERVISOR))
914 msr_set_bit(MSR_ZEN4_BP_CFG, MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT);
915}
916
917static void init_amd_zen5(struct cpuinfo_x86 *c)
918{
919}
920
921static void init_amd(struct cpuinfo_x86 *c)
922{
923 u64 vm_cr;
924
925 early_init_amd(c);
926
927 /*
928 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
929 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
930 */
931 clear_cpu_cap(c, 0*32+31);
932
933 if (c->x86 >= 0x10)
934 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
935
936 /* AMD FSRM also implies FSRS */
937 if (cpu_has(c, X86_FEATURE_FSRM))
938 set_cpu_cap(c, X86_FEATURE_FSRS);
939
940 /* K6s reports MCEs but don't actually have all the MSRs */
941 if (c->x86 < 6)
942 clear_cpu_cap(c, X86_FEATURE_MCE);
943
944 switch (c->x86) {
945 case 4: init_amd_k5(c); break;
946 case 5: init_amd_k6(c); break;
947 case 6: init_amd_k7(c); break;
948 case 0xf: init_amd_k8(c); break;
949 case 0x10: init_amd_gh(c); break;
950 case 0x12: init_amd_ln(c); break;
951 case 0x15: init_amd_bd(c); break;
952 case 0x16: init_amd_jg(c); break;
953 }
954
955 /*
956 * Save up on some future enablement work and do common Zen
957 * settings.
958 */
959 if (c->x86 >= 0x17)
960 init_amd_zen_common();
961
962 if (boot_cpu_has(X86_FEATURE_ZEN1))
963 init_amd_zen1(c);
964 else if (boot_cpu_has(X86_FEATURE_ZEN2))
965 init_amd_zen2(c);
966 else if (boot_cpu_has(X86_FEATURE_ZEN3))
967 init_amd_zen3(c);
968 else if (boot_cpu_has(X86_FEATURE_ZEN4))
969 init_amd_zen4(c);
970 else if (boot_cpu_has(X86_FEATURE_ZEN5))
971 init_amd_zen5(c);
972
973 /*
974 * Enable workaround for FXSAVE leak on CPUs
975 * without a XSaveErPtr feature
976 */
977 if ((c->x86 >= 6) && (!cpu_has(c, X86_FEATURE_XSAVEERPTR)))
978 set_cpu_bug(c, X86_BUG_FXSAVE_LEAK);
979
980 cpu_detect_cache_sizes(c);
981
982 srat_detect_node(c);
983
984 init_amd_cacheinfo(c);
985
986 if (cpu_has(c, X86_FEATURE_SVM)) {
987 rdmsrl(MSR_VM_CR, vm_cr);
988 if (vm_cr & SVM_VM_CR_SVM_DIS_MASK) {
989 pr_notice_once("SVM disabled (by BIOS) in MSR_VM_CR\n");
990 clear_cpu_cap(c, X86_FEATURE_SVM);
991 }
992 }
993
994 if (!cpu_has(c, X86_FEATURE_LFENCE_RDTSC) && cpu_has(c, X86_FEATURE_XMM2)) {
995 /*
996 * Use LFENCE for execution serialization. On families which
997 * don't have that MSR, LFENCE is already serializing.
998 * msr_set_bit() uses the safe accessors, too, even if the MSR
999 * is not present.
1000 */
1001 msr_set_bit(MSR_AMD64_DE_CFG,
1002 MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT);
1003
1004 /* A serializing LFENCE stops RDTSC speculation */
1005 set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
1006 }
1007
1008 /*
1009 * Family 0x12 and above processors have APIC timer
1010 * running in deep C states.
1011 */
1012 if (c->x86 > 0x11)
1013 set_cpu_cap(c, X86_FEATURE_ARAT);
1014
1015 /* 3DNow or LM implies PREFETCHW */
1016 if (!cpu_has(c, X86_FEATURE_3DNOWPREFETCH))
1017 if (cpu_has(c, X86_FEATURE_3DNOW) || cpu_has(c, X86_FEATURE_LM))
1018 set_cpu_cap(c, X86_FEATURE_3DNOWPREFETCH);
1019
1020 /* AMD CPUs don't reset SS attributes on SYSRET, Xen does. */
1021 if (!cpu_feature_enabled(X86_FEATURE_XENPV))
1022 set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
1023
1024 /*
1025 * Turn on the Instructions Retired free counter on machines not
1026 * susceptible to erratum #1054 "Instructions Retired Performance
1027 * Counter May Be Inaccurate".
1028 */
1029 if (cpu_has(c, X86_FEATURE_IRPERF) &&
1030 (boot_cpu_has(X86_FEATURE_ZEN1) && c->x86_model > 0x2f))
1031 msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT);
1032
1033 check_null_seg_clears_base(c);
1034
1035 /*
1036 * Make sure EFER[AIBRSE - Automatic IBRS Enable] is set. The APs are brought up
1037 * using the trampoline code and as part of it, MSR_EFER gets prepared there in
1038 * order to be replicated onto them. Regardless, set it here again, if not set,
1039 * to protect against any future refactoring/code reorganization which might
1040 * miss setting this important bit.
1041 */
1042 if (spectre_v2_in_eibrs_mode(spectre_v2_enabled) &&
1043 cpu_has(c, X86_FEATURE_AUTOIBRS))
1044 WARN_ON_ONCE(msr_set_bit(MSR_EFER, _EFER_AUTOIBRS));
1045
1046 /* AMD CPUs don't need fencing after x2APIC/TSC_DEADLINE MSR writes. */
1047 clear_cpu_cap(c, X86_FEATURE_APIC_MSRS_FENCE);
1048}
1049
1050#ifdef CONFIG_X86_32
1051static unsigned int amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
1052{
1053 /* AMD errata T13 (order #21922) */
1054 if (c->x86 == 6) {
1055 /* Duron Rev A0 */
1056 if (c->x86_model == 3 && c->x86_stepping == 0)
1057 size = 64;
1058 /* Tbird rev A1/A2 */
1059 if (c->x86_model == 4 &&
1060 (c->x86_stepping == 0 || c->x86_stepping == 1))
1061 size = 256;
1062 }
1063 return size;
1064}
1065#endif
1066
1067static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
1068{
1069 u32 ebx, eax, ecx, edx;
1070 u16 mask = 0xfff;
1071
1072 if (c->x86 < 0xf)
1073 return;
1074
1075 if (c->extended_cpuid_level < 0x80000006)
1076 return;
1077
1078 cpuid(0x80000006, &eax, &ebx, &ecx, &edx);
1079
1080 tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask;
1081 tlb_lli_4k[ENTRIES] = ebx & mask;
1082
1083 /*
1084 * K8 doesn't have 2M/4M entries in the L2 TLB so read out the L1 TLB
1085 * characteristics from the CPUID function 0x80000005 instead.
1086 */
1087 if (c->x86 == 0xf) {
1088 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1089 mask = 0xff;
1090 }
1091
1092 /* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1093 if (!((eax >> 16) & mask))
1094 tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff;
1095 else
1096 tlb_lld_2m[ENTRIES] = (eax >> 16) & mask;
1097
1098 /* a 4M entry uses two 2M entries */
1099 tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1;
1100
1101 /* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1102 if (!(eax & mask)) {
1103 /* Erratum 658 */
1104 if (c->x86 == 0x15 && c->x86_model <= 0x1f) {
1105 tlb_lli_2m[ENTRIES] = 1024;
1106 } else {
1107 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1108 tlb_lli_2m[ENTRIES] = eax & 0xff;
1109 }
1110 } else
1111 tlb_lli_2m[ENTRIES] = eax & mask;
1112
1113 tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1;
1114}
1115
1116static const struct cpu_dev amd_cpu_dev = {
1117 .c_vendor = "AMD",
1118 .c_ident = { "AuthenticAMD" },
1119#ifdef CONFIG_X86_32
1120 .legacy_models = {
1121 { .family = 4, .model_names =
1122 {
1123 [3] = "486 DX/2",
1124 [7] = "486 DX/2-WB",
1125 [8] = "486 DX/4",
1126 [9] = "486 DX/4-WB",
1127 [14] = "Am5x86-WT",
1128 [15] = "Am5x86-WB"
1129 }
1130 },
1131 },
1132 .legacy_cache_size = amd_size_cache,
1133#endif
1134 .c_early_init = early_init_amd,
1135 .c_detect_tlb = cpu_detect_tlb_amd,
1136 .c_bsp_init = bsp_init_amd,
1137 .c_init = init_amd,
1138 .c_x86_vendor = X86_VENDOR_AMD,
1139};
1140
1141cpu_dev_register(amd_cpu_dev);
1142
1143static DEFINE_PER_CPU_READ_MOSTLY(unsigned long[4], amd_dr_addr_mask);
1144
1145static unsigned int amd_msr_dr_addr_masks[] = {
1146 MSR_F16H_DR0_ADDR_MASK,
1147 MSR_F16H_DR1_ADDR_MASK,
1148 MSR_F16H_DR1_ADDR_MASK + 1,
1149 MSR_F16H_DR1_ADDR_MASK + 2
1150};
1151
1152void amd_set_dr_addr_mask(unsigned long mask, unsigned int dr)
1153{
1154 int cpu = smp_processor_id();
1155
1156 if (!cpu_feature_enabled(X86_FEATURE_BPEXT))
1157 return;
1158
1159 if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks)))
1160 return;
1161
1162 if (per_cpu(amd_dr_addr_mask, cpu)[dr] == mask)
1163 return;
1164
1165 wrmsr(amd_msr_dr_addr_masks[dr], mask, 0);
1166 per_cpu(amd_dr_addr_mask, cpu)[dr] = mask;
1167}
1168
1169unsigned long amd_get_dr_addr_mask(unsigned int dr)
1170{
1171 if (!cpu_feature_enabled(X86_FEATURE_BPEXT))
1172 return 0;
1173
1174 if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks)))
1175 return 0;
1176
1177 return per_cpu(amd_dr_addr_mask[dr], smp_processor_id());
1178}
1179EXPORT_SYMBOL_GPL(amd_get_dr_addr_mask);
1180
1181u32 amd_get_highest_perf(void)
1182{
1183 struct cpuinfo_x86 *c = &boot_cpu_data;
1184
1185 if (c->x86 == 0x17 && ((c->x86_model >= 0x30 && c->x86_model < 0x40) ||
1186 (c->x86_model >= 0x70 && c->x86_model < 0x80)))
1187 return 166;
1188
1189 if (c->x86 == 0x19 && ((c->x86_model >= 0x20 && c->x86_model < 0x30) ||
1190 (c->x86_model >= 0x40 && c->x86_model < 0x70)))
1191 return 166;
1192
1193 return 255;
1194}
1195EXPORT_SYMBOL_GPL(amd_get_highest_perf);
1196
1197static void zenbleed_check_cpu(void *unused)
1198{
1199 struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
1200
1201 zen2_zenbleed_check(c);
1202}
1203
1204void amd_check_microcode(void)
1205{
1206 if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
1207 return;
1208
1209 on_each_cpu(zenbleed_check_cpu, NULL, 1);
1210}
1211
1212/*
1213 * Issue a DIV 0/1 insn to clear any division data from previous DIV
1214 * operations.
1215 */
1216void noinstr amd_clear_divider(void)
1217{
1218 asm volatile(ALTERNATIVE("", "div %2\n\t", X86_BUG_DIV0)
1219 :: "a" (0), "d" (0), "r" (1));
1220}
1221EXPORT_SYMBOL_GPL(amd_clear_divider);