Loading...
1/* Driver for USB Mass Storage compliant devices
2 * SCSI layer glue code
3 *
4 * Current development and maintenance by:
5 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
6 *
7 * Developed with the assistance of:
8 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
9 * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
10 *
11 * Initial work by:
12 * (c) 1999 Michael Gee (michael@linuxspecific.com)
13 *
14 * This driver is based on the 'USB Mass Storage Class' document. This
15 * describes in detail the protocol used to communicate with such
16 * devices. Clearly, the designers had SCSI and ATAPI commands in
17 * mind when they created this document. The commands are all very
18 * similar to commands in the SCSI-II and ATAPI specifications.
19 *
20 * It is important to note that in a number of cases this class
21 * exhibits class-specific exemptions from the USB specification.
22 * Notably the usage of NAK, STALL and ACK differs from the norm, in
23 * that they are used to communicate wait, failed and OK on commands.
24 *
25 * Also, for certain devices, the interrupt endpoint is used to convey
26 * status of a command.
27 *
28 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
29 * information about this driver.
30 *
31 * This program is free software; you can redistribute it and/or modify it
32 * under the terms of the GNU General Public License as published by the
33 * Free Software Foundation; either version 2, or (at your option) any
34 * later version.
35 *
36 * This program is distributed in the hope that it will be useful, but
37 * WITHOUT ANY WARRANTY; without even the implied warranty of
38 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
39 * General Public License for more details.
40 *
41 * You should have received a copy of the GNU General Public License along
42 * with this program; if not, write to the Free Software Foundation, Inc.,
43 * 675 Mass Ave, Cambridge, MA 02139, USA.
44 */
45
46#include <linux/module.h>
47#include <linux/mutex.h>
48
49#include <scsi/scsi.h>
50#include <scsi/scsi_cmnd.h>
51#include <scsi/scsi_devinfo.h>
52#include <scsi/scsi_device.h>
53#include <scsi/scsi_eh.h>
54
55#include "usb.h"
56#include "scsiglue.h"
57#include "debug.h"
58#include "transport.h"
59#include "protocol.h"
60
61/* Vendor IDs for companies that seem to include the READ CAPACITY bug
62 * in all their devices
63 */
64#define VENDOR_ID_NOKIA 0x0421
65#define VENDOR_ID_NIKON 0x04b0
66#define VENDOR_ID_PENTAX 0x0a17
67#define VENDOR_ID_MOTOROLA 0x22b8
68
69/***********************************************************************
70 * Host functions
71 ***********************************************************************/
72
73static const char* host_info(struct Scsi_Host *host)
74{
75 struct us_data *us = host_to_us(host);
76 return us->scsi_name;
77}
78
79static int slave_alloc (struct scsi_device *sdev)
80{
81 struct us_data *us = host_to_us(sdev->host);
82
83 /*
84 * Set the INQUIRY transfer length to 36. We don't use any of
85 * the extra data and many devices choke if asked for more or
86 * less than 36 bytes.
87 */
88 sdev->inquiry_len = 36;
89
90 /* USB has unusual DMA-alignment requirements: Although the
91 * starting address of each scatter-gather element doesn't matter,
92 * the length of each element except the last must be divisible
93 * by the Bulk maxpacket value. There's currently no way to
94 * express this by block-layer constraints, so we'll cop out
95 * and simply require addresses to be aligned at 512-byte
96 * boundaries. This is okay since most block I/O involves
97 * hardware sectors that are multiples of 512 bytes in length,
98 * and since host controllers up through USB 2.0 have maxpacket
99 * values no larger than 512.
100 *
101 * But it doesn't suffice for Wireless USB, where Bulk maxpacket
102 * values can be as large as 2048. To make that work properly
103 * will require changes to the block layer.
104 */
105 blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
106
107 /*
108 * The UFI spec treates the Peripheral Qualifier bits in an
109 * INQUIRY result as reserved and requires devices to set them
110 * to 0. However the SCSI spec requires these bits to be set
111 * to 3 to indicate when a LUN is not present.
112 *
113 * Let the scanning code know if this target merely sets
114 * Peripheral Device Type to 0x1f to indicate no LUN.
115 */
116 if (us->subclass == USB_SC_UFI)
117 sdev->sdev_target->pdt_1f_for_no_lun = 1;
118
119 return 0;
120}
121
122static int slave_configure(struct scsi_device *sdev)
123{
124 struct us_data *us = host_to_us(sdev->host);
125
126 /* Many devices have trouble transferring more than 32KB at a time,
127 * while others have trouble with more than 64K. At this time we
128 * are limiting both to 32K (64 sectores).
129 */
130 if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
131 unsigned int max_sectors = 64;
132
133 if (us->fflags & US_FL_MAX_SECTORS_MIN)
134 max_sectors = PAGE_CACHE_SIZE >> 9;
135 if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
136 blk_queue_max_hw_sectors(sdev->request_queue,
137 max_sectors);
138 } else if (sdev->type == TYPE_TAPE) {
139 /* Tapes need much higher max_sector limits, so just
140 * raise it to the maximum possible (4 GB / 512) and
141 * let the queue segment size sort out the real limit.
142 */
143 blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
144 }
145
146 /* Some USB host controllers can't do DMA; they have to use PIO.
147 * They indicate this by setting their dma_mask to NULL. For
148 * such controllers we need to make sure the block layer sets
149 * up bounce buffers in addressable memory.
150 */
151 if (!us->pusb_dev->bus->controller->dma_mask)
152 blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
153
154 /* We can't put these settings in slave_alloc() because that gets
155 * called before the device type is known. Consequently these
156 * settings can't be overridden via the scsi devinfo mechanism. */
157 if (sdev->type == TYPE_DISK) {
158
159 /* Some vendors seem to put the READ CAPACITY bug into
160 * all their devices -- primarily makers of cell phones
161 * and digital cameras. Since these devices always use
162 * flash media and can be expected to have an even number
163 * of sectors, we will always enable the CAPACITY_HEURISTICS
164 * flag unless told otherwise. */
165 switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
166 case VENDOR_ID_NOKIA:
167 case VENDOR_ID_NIKON:
168 case VENDOR_ID_PENTAX:
169 case VENDOR_ID_MOTOROLA:
170 if (!(us->fflags & (US_FL_FIX_CAPACITY |
171 US_FL_CAPACITY_OK)))
172 us->fflags |= US_FL_CAPACITY_HEURISTICS;
173 break;
174 }
175
176 /* Disk-type devices use MODE SENSE(6) if the protocol
177 * (SubClass) is Transparent SCSI, otherwise they use
178 * MODE SENSE(10). */
179 if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
180 sdev->use_10_for_ms = 1;
181
182 /* Many disks only accept MODE SENSE transfer lengths of
183 * 192 bytes (that's what Windows uses). */
184 sdev->use_192_bytes_for_3f = 1;
185
186 /* Some devices don't like MODE SENSE with page=0x3f,
187 * which is the command used for checking if a device
188 * is write-protected. Now that we tell the sd driver
189 * to do a 192-byte transfer with this command the
190 * majority of devices work fine, but a few still can't
191 * handle it. The sd driver will simply assume those
192 * devices are write-enabled. */
193 if (us->fflags & US_FL_NO_WP_DETECT)
194 sdev->skip_ms_page_3f = 1;
195
196 /* A number of devices have problems with MODE SENSE for
197 * page x08, so we will skip it. */
198 sdev->skip_ms_page_8 = 1;
199
200 /* Some disks return the total number of blocks in response
201 * to READ CAPACITY rather than the highest block number.
202 * If this device makes that mistake, tell the sd driver. */
203 if (us->fflags & US_FL_FIX_CAPACITY)
204 sdev->fix_capacity = 1;
205
206 /* A few disks have two indistinguishable version, one of
207 * which reports the correct capacity and the other does not.
208 * The sd driver has to guess which is the case. */
209 if (us->fflags & US_FL_CAPACITY_HEURISTICS)
210 sdev->guess_capacity = 1;
211
212 /* Some devices cannot handle READ_CAPACITY_16 */
213 if (us->fflags & US_FL_NO_READ_CAPACITY_16)
214 sdev->no_read_capacity_16 = 1;
215
216 /* assume SPC3 or latter devices support sense size > 18 */
217 if (sdev->scsi_level > SCSI_SPC_2)
218 us->fflags |= US_FL_SANE_SENSE;
219
220 /* Some devices report a SCSI revision level above 2 but are
221 * unable to handle the REPORT LUNS command (for which
222 * support is mandatory at level 3). Since we already have
223 * a Get-Max-LUN request, we won't lose much by setting the
224 * revision level down to 2. The only devices that would be
225 * affected are those with sparse LUNs. */
226 if (sdev->scsi_level > SCSI_2)
227 sdev->sdev_target->scsi_level =
228 sdev->scsi_level = SCSI_2;
229
230 /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
231 * Hardware Error) when any low-level error occurs,
232 * recoverable or not. Setting this flag tells the SCSI
233 * midlayer to retry such commands, which frequently will
234 * succeed and fix the error. The worst this can lead to
235 * is an occasional series of retries that will all fail. */
236 sdev->retry_hwerror = 1;
237
238 /* USB disks should allow restart. Some drives spin down
239 * automatically, requiring a START-STOP UNIT command. */
240 sdev->allow_restart = 1;
241
242 /* Some USB cardreaders have trouble reading an sdcard's last
243 * sector in a larger then 1 sector read, since the performance
244 * impact is negible we set this flag for all USB disks */
245 sdev->last_sector_bug = 1;
246
247 /* Enable last-sector hacks for single-target devices using
248 * the Bulk-only transport, unless we already know the
249 * capacity will be decremented or is correct. */
250 if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
251 US_FL_SCM_MULT_TARG)) &&
252 us->protocol == USB_PR_BULK)
253 us->use_last_sector_hacks = 1;
254 } else {
255
256 /* Non-disk-type devices don't need to blacklist any pages
257 * or to force 192-byte transfer lengths for MODE SENSE.
258 * But they do need to use MODE SENSE(10). */
259 sdev->use_10_for_ms = 1;
260
261 /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
262 if (us->fflags & US_FL_NO_READ_DISC_INFO)
263 sdev->no_read_disc_info = 1;
264 }
265
266 /* The CB and CBI transports have no way to pass LUN values
267 * other than the bits in the second byte of a CDB. But those
268 * bits don't get set to the LUN value if the device reports
269 * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
270 * be single-LUN.
271 */
272 if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
273 sdev->scsi_level == SCSI_UNKNOWN)
274 us->max_lun = 0;
275
276 /* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
277 * REMOVAL command, so suppress those commands. */
278 if (us->fflags & US_FL_NOT_LOCKABLE)
279 sdev->lockable = 0;
280
281 /* this is to satisfy the compiler, tho I don't think the
282 * return code is ever checked anywhere. */
283 return 0;
284}
285
286/* queue a command */
287/* This is always called with scsi_lock(host) held */
288static int queuecommand_lck(struct scsi_cmnd *srb,
289 void (*done)(struct scsi_cmnd *))
290{
291 struct us_data *us = host_to_us(srb->device->host);
292
293 US_DEBUGP("%s called\n", __func__);
294
295 /* check for state-transition errors */
296 if (us->srb != NULL) {
297 printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
298 __func__, us->srb);
299 return SCSI_MLQUEUE_HOST_BUSY;
300 }
301
302 /* fail the command if we are disconnecting */
303 if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
304 US_DEBUGP("Fail command during disconnect\n");
305 srb->result = DID_NO_CONNECT << 16;
306 done(srb);
307 return 0;
308 }
309
310 /* enqueue the command and wake up the control thread */
311 srb->scsi_done = done;
312 us->srb = srb;
313 complete(&us->cmnd_ready);
314
315 return 0;
316}
317
318static DEF_SCSI_QCMD(queuecommand)
319
320/***********************************************************************
321 * Error handling functions
322 ***********************************************************************/
323
324/* Command timeout and abort */
325static int command_abort(struct scsi_cmnd *srb)
326{
327 struct us_data *us = host_to_us(srb->device->host);
328
329 US_DEBUGP("%s called\n", __func__);
330
331 /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
332 * bits are protected by the host lock. */
333 scsi_lock(us_to_host(us));
334
335 /* Is this command still active? */
336 if (us->srb != srb) {
337 scsi_unlock(us_to_host(us));
338 US_DEBUGP ("-- nothing to abort\n");
339 return FAILED;
340 }
341
342 /* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
343 * a device reset isn't already in progress (to avoid interfering
344 * with the reset). Note that we must retain the host lock while
345 * calling usb_stor_stop_transport(); otherwise it might interfere
346 * with an auto-reset that begins as soon as we release the lock. */
347 set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
348 if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
349 set_bit(US_FLIDX_ABORTING, &us->dflags);
350 usb_stor_stop_transport(us);
351 }
352 scsi_unlock(us_to_host(us));
353
354 /* Wait for the aborted command to finish */
355 wait_for_completion(&us->notify);
356 return SUCCESS;
357}
358
359/* This invokes the transport reset mechanism to reset the state of the
360 * device */
361static int device_reset(struct scsi_cmnd *srb)
362{
363 struct us_data *us = host_to_us(srb->device->host);
364 int result;
365
366 US_DEBUGP("%s called\n", __func__);
367
368 /* lock the device pointers and do the reset */
369 mutex_lock(&(us->dev_mutex));
370 result = us->transport_reset(us);
371 mutex_unlock(&us->dev_mutex);
372
373 return result < 0 ? FAILED : SUCCESS;
374}
375
376/* Simulate a SCSI bus reset by resetting the device's USB port. */
377static int bus_reset(struct scsi_cmnd *srb)
378{
379 struct us_data *us = host_to_us(srb->device->host);
380 int result;
381
382 US_DEBUGP("%s called\n", __func__);
383 result = usb_stor_port_reset(us);
384 return result < 0 ? FAILED : SUCCESS;
385}
386
387/* Report a driver-initiated device reset to the SCSI layer.
388 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
389 * The caller must own the SCSI host lock. */
390void usb_stor_report_device_reset(struct us_data *us)
391{
392 int i;
393 struct Scsi_Host *host = us_to_host(us);
394
395 scsi_report_device_reset(host, 0, 0);
396 if (us->fflags & US_FL_SCM_MULT_TARG) {
397 for (i = 1; i < host->max_id; ++i)
398 scsi_report_device_reset(host, 0, i);
399 }
400}
401
402/* Report a driver-initiated bus reset to the SCSI layer.
403 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
404 * The caller must not own the SCSI host lock. */
405void usb_stor_report_bus_reset(struct us_data *us)
406{
407 struct Scsi_Host *host = us_to_host(us);
408
409 scsi_lock(host);
410 scsi_report_bus_reset(host, 0);
411 scsi_unlock(host);
412}
413
414/***********************************************************************
415 * /proc/scsi/ functions
416 ***********************************************************************/
417
418/* we use this macro to help us write into the buffer */
419#undef SPRINTF
420#define SPRINTF(args...) \
421 do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)
422
423static int proc_info (struct Scsi_Host *host, char *buffer,
424 char **start, off_t offset, int length, int inout)
425{
426 struct us_data *us = host_to_us(host);
427 char *pos = buffer;
428 const char *string;
429
430 /* if someone is sending us data, just throw it away */
431 if (inout)
432 return length;
433
434 /* print the controller name */
435 SPRINTF(" Host scsi%d: usb-storage\n", host->host_no);
436
437 /* print product, vendor, and serial number strings */
438 if (us->pusb_dev->manufacturer)
439 string = us->pusb_dev->manufacturer;
440 else if (us->unusual_dev->vendorName)
441 string = us->unusual_dev->vendorName;
442 else
443 string = "Unknown";
444 SPRINTF(" Vendor: %s\n", string);
445 if (us->pusb_dev->product)
446 string = us->pusb_dev->product;
447 else if (us->unusual_dev->productName)
448 string = us->unusual_dev->productName;
449 else
450 string = "Unknown";
451 SPRINTF(" Product: %s\n", string);
452 if (us->pusb_dev->serial)
453 string = us->pusb_dev->serial;
454 else
455 string = "None";
456 SPRINTF("Serial Number: %s\n", string);
457
458 /* show the protocol and transport */
459 SPRINTF(" Protocol: %s\n", us->protocol_name);
460 SPRINTF(" Transport: %s\n", us->transport_name);
461
462 /* show the device flags */
463 if (pos < buffer + length) {
464 pos += sprintf(pos, " Quirks:");
465
466#define US_FLAG(name, value) \
467 if (us->fflags & value) pos += sprintf(pos, " " #name);
468US_DO_ALL_FLAGS
469#undef US_FLAG
470
471 *(pos++) = '\n';
472 }
473
474 /*
475 * Calculate start of next buffer, and return value.
476 */
477 *start = buffer + offset;
478
479 if ((pos - buffer) < offset)
480 return (0);
481 else if ((pos - buffer - offset) < length)
482 return (pos - buffer - offset);
483 else
484 return (length);
485}
486
487/***********************************************************************
488 * Sysfs interface
489 ***********************************************************************/
490
491/* Output routine for the sysfs max_sectors file */
492static ssize_t show_max_sectors(struct device *dev, struct device_attribute *attr, char *buf)
493{
494 struct scsi_device *sdev = to_scsi_device(dev);
495
496 return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
497}
498
499/* Input routine for the sysfs max_sectors file */
500static ssize_t store_max_sectors(struct device *dev, struct device_attribute *attr, const char *buf,
501 size_t count)
502{
503 struct scsi_device *sdev = to_scsi_device(dev);
504 unsigned short ms;
505
506 if (sscanf(buf, "%hu", &ms) > 0) {
507 blk_queue_max_hw_sectors(sdev->request_queue, ms);
508 return count;
509 }
510 return -EINVAL;
511}
512
513static DEVICE_ATTR(max_sectors, S_IRUGO | S_IWUSR, show_max_sectors,
514 store_max_sectors);
515
516static struct device_attribute *sysfs_device_attr_list[] = {
517 &dev_attr_max_sectors,
518 NULL,
519 };
520
521/*
522 * this defines our host template, with which we'll allocate hosts
523 */
524
525struct scsi_host_template usb_stor_host_template = {
526 /* basic userland interface stuff */
527 .name = "usb-storage",
528 .proc_name = "usb-storage",
529 .proc_info = proc_info,
530 .info = host_info,
531
532 /* command interface -- queued only */
533 .queuecommand = queuecommand,
534
535 /* error and abort handlers */
536 .eh_abort_handler = command_abort,
537 .eh_device_reset_handler = device_reset,
538 .eh_bus_reset_handler = bus_reset,
539
540 /* queue commands only, only one command per LUN */
541 .can_queue = 1,
542 .cmd_per_lun = 1,
543
544 /* unknown initiator id */
545 .this_id = -1,
546
547 .slave_alloc = slave_alloc,
548 .slave_configure = slave_configure,
549
550 /* lots of sg segments can be handled */
551 .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
552
553 /* limit the total size of a transfer to 120 KB */
554 .max_sectors = 240,
555
556 /* merge commands... this seems to help performance, but
557 * periodically someone should test to see which setting is more
558 * optimal.
559 */
560 .use_clustering = 1,
561
562 /* emulated HBA */
563 .emulated = 1,
564
565 /* we do our own delay after a device or bus reset */
566 .skip_settle_delay = 1,
567
568 /* sysfs device attributes */
569 .sdev_attrs = sysfs_device_attr_list,
570
571 /* module management */
572 .module = THIS_MODULE
573};
574
575/* To Report "Illegal Request: Invalid Field in CDB */
576unsigned char usb_stor_sense_invalidCDB[18] = {
577 [0] = 0x70, /* current error */
578 [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */
579 [7] = 0x0a, /* additional length */
580 [12] = 0x24 /* Invalid Field in CDB */
581};
582EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Driver for USB Mass Storage compliant devices
4 * SCSI layer glue code
5 *
6 * Current development and maintenance by:
7 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
8 *
9 * Developed with the assistance of:
10 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
11 * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
12 *
13 * Initial work by:
14 * (c) 1999 Michael Gee (michael@linuxspecific.com)
15 *
16 * This driver is based on the 'USB Mass Storage Class' document. This
17 * describes in detail the protocol used to communicate with such
18 * devices. Clearly, the designers had SCSI and ATAPI commands in
19 * mind when they created this document. The commands are all very
20 * similar to commands in the SCSI-II and ATAPI specifications.
21 *
22 * It is important to note that in a number of cases this class
23 * exhibits class-specific exemptions from the USB specification.
24 * Notably the usage of NAK, STALL and ACK differs from the norm, in
25 * that they are used to communicate wait, failed and OK on commands.
26 *
27 * Also, for certain devices, the interrupt endpoint is used to convey
28 * status of a command.
29 */
30
31#include <linux/blkdev.h>
32#include <linux/dma-mapping.h>
33#include <linux/module.h>
34#include <linux/mutex.h>
35
36#include <scsi/scsi.h>
37#include <scsi/scsi_cmnd.h>
38#include <scsi/scsi_devinfo.h>
39#include <scsi/scsi_device.h>
40#include <scsi/scsi_eh.h>
41
42#include "usb.h"
43#include <linux/usb/hcd.h>
44#include "scsiglue.h"
45#include "debug.h"
46#include "transport.h"
47#include "protocol.h"
48
49/*
50 * Vendor IDs for companies that seem to include the READ CAPACITY bug
51 * in all their devices
52 */
53#define VENDOR_ID_NOKIA 0x0421
54#define VENDOR_ID_NIKON 0x04b0
55#define VENDOR_ID_PENTAX 0x0a17
56#define VENDOR_ID_MOTOROLA 0x22b8
57
58/***********************************************************************
59 * Host functions
60 ***********************************************************************/
61
62static const char* host_info(struct Scsi_Host *host)
63{
64 struct us_data *us = host_to_us(host);
65 return us->scsi_name;
66}
67
68static int slave_alloc (struct scsi_device *sdev)
69{
70 struct us_data *us = host_to_us(sdev->host);
71
72 /*
73 * Set the INQUIRY transfer length to 36. We don't use any of
74 * the extra data and many devices choke if asked for more or
75 * less than 36 bytes.
76 */
77 sdev->inquiry_len = 36;
78
79 /*
80 * Some host controllers may have alignment requirements.
81 * We'll play it safe by requiring 512-byte alignment always.
82 */
83 blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
84
85 /* Tell the SCSI layer if we know there is more than one LUN */
86 if (us->protocol == USB_PR_BULK && us->max_lun > 0)
87 sdev->sdev_bflags |= BLIST_FORCELUN;
88
89 return 0;
90}
91
92static int slave_configure(struct scsi_device *sdev)
93{
94 struct us_data *us = host_to_us(sdev->host);
95 struct device *dev = us->pusb_dev->bus->sysdev;
96
97 /*
98 * Many devices have trouble transferring more than 32KB at a time,
99 * while others have trouble with more than 64K. At this time we
100 * are limiting both to 32K (64 sectores).
101 */
102 if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
103 unsigned int max_sectors = 64;
104
105 if (us->fflags & US_FL_MAX_SECTORS_MIN)
106 max_sectors = PAGE_SIZE >> 9;
107 if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
108 blk_queue_max_hw_sectors(sdev->request_queue,
109 max_sectors);
110 } else if (sdev->type == TYPE_TAPE) {
111 /*
112 * Tapes need much higher max_sector limits, so just
113 * raise it to the maximum possible (4 GB / 512) and
114 * let the queue segment size sort out the real limit.
115 */
116 blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
117 } else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
118 /*
119 * USB3 devices will be limited to 2048 sectors. This gives us
120 * better throughput on most devices.
121 */
122 blk_queue_max_hw_sectors(sdev->request_queue, 2048);
123 }
124
125 /*
126 * The max_hw_sectors should be up to maximum size of a mapping for
127 * the device. Otherwise, a DMA API might fail on swiotlb environment.
128 */
129 blk_queue_max_hw_sectors(sdev->request_queue,
130 min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
131 dma_max_mapping_size(dev) >> SECTOR_SHIFT));
132
133 /*
134 * Some USB host controllers can't do DMA; they have to use PIO.
135 * For such controllers we need to make sure the block layer sets
136 * up bounce buffers in addressable memory.
137 */
138 if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
139 (bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL))
140 blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
141
142 /*
143 * We can't put these settings in slave_alloc() because that gets
144 * called before the device type is known. Consequently these
145 * settings can't be overridden via the scsi devinfo mechanism.
146 */
147 if (sdev->type == TYPE_DISK) {
148
149 /*
150 * Some vendors seem to put the READ CAPACITY bug into
151 * all their devices -- primarily makers of cell phones
152 * and digital cameras. Since these devices always use
153 * flash media and can be expected to have an even number
154 * of sectors, we will always enable the CAPACITY_HEURISTICS
155 * flag unless told otherwise.
156 */
157 switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
158 case VENDOR_ID_NOKIA:
159 case VENDOR_ID_NIKON:
160 case VENDOR_ID_PENTAX:
161 case VENDOR_ID_MOTOROLA:
162 if (!(us->fflags & (US_FL_FIX_CAPACITY |
163 US_FL_CAPACITY_OK)))
164 us->fflags |= US_FL_CAPACITY_HEURISTICS;
165 break;
166 }
167
168 /*
169 * Disk-type devices use MODE SENSE(6) if the protocol
170 * (SubClass) is Transparent SCSI, otherwise they use
171 * MODE SENSE(10).
172 */
173 if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
174 sdev->use_10_for_ms = 1;
175
176 /*
177 *Many disks only accept MODE SENSE transfer lengths of
178 * 192 bytes (that's what Windows uses).
179 */
180 sdev->use_192_bytes_for_3f = 1;
181
182 /*
183 * Some devices report generic values until the media has been
184 * accessed. Force a READ(10) prior to querying device
185 * characteristics.
186 */
187 sdev->read_before_ms = 1;
188
189 /*
190 * Some devices don't like MODE SENSE with page=0x3f,
191 * which is the command used for checking if a device
192 * is write-protected. Now that we tell the sd driver
193 * to do a 192-byte transfer with this command the
194 * majority of devices work fine, but a few still can't
195 * handle it. The sd driver will simply assume those
196 * devices are write-enabled.
197 */
198 if (us->fflags & US_FL_NO_WP_DETECT)
199 sdev->skip_ms_page_3f = 1;
200
201 /*
202 * A number of devices have problems with MODE SENSE for
203 * page x08, so we will skip it.
204 */
205 sdev->skip_ms_page_8 = 1;
206
207 /*
208 * Some devices don't handle VPD pages correctly, so skip vpd
209 * pages if not forced by SCSI layer.
210 */
211 sdev->skip_vpd_pages = !sdev->try_vpd_pages;
212
213 /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */
214 sdev->no_report_opcodes = 1;
215
216 /* Do not attempt to use WRITE SAME */
217 sdev->no_write_same = 1;
218
219 /*
220 * Some disks return the total number of blocks in response
221 * to READ CAPACITY rather than the highest block number.
222 * If this device makes that mistake, tell the sd driver.
223 */
224 if (us->fflags & US_FL_FIX_CAPACITY)
225 sdev->fix_capacity = 1;
226
227 /*
228 * A few disks have two indistinguishable version, one of
229 * which reports the correct capacity and the other does not.
230 * The sd driver has to guess which is the case.
231 */
232 if (us->fflags & US_FL_CAPACITY_HEURISTICS)
233 sdev->guess_capacity = 1;
234
235 /* Some devices cannot handle READ_CAPACITY_16 */
236 if (us->fflags & US_FL_NO_READ_CAPACITY_16)
237 sdev->no_read_capacity_16 = 1;
238
239 /*
240 * Many devices do not respond properly to READ_CAPACITY_16.
241 * Tell the SCSI layer to try READ_CAPACITY_10 first.
242 * However some USB 3.0 drive enclosures return capacity
243 * modulo 2TB. Those must use READ_CAPACITY_16
244 */
245 if (!(us->fflags & US_FL_NEEDS_CAP16))
246 sdev->try_rc_10_first = 1;
247
248 /*
249 * assume SPC3 or latter devices support sense size > 18
250 * unless US_FL_BAD_SENSE quirk is specified.
251 */
252 if (sdev->scsi_level > SCSI_SPC_2 &&
253 !(us->fflags & US_FL_BAD_SENSE))
254 us->fflags |= US_FL_SANE_SENSE;
255
256 /*
257 * USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
258 * Hardware Error) when any low-level error occurs,
259 * recoverable or not. Setting this flag tells the SCSI
260 * midlayer to retry such commands, which frequently will
261 * succeed and fix the error. The worst this can lead to
262 * is an occasional series of retries that will all fail.
263 */
264 sdev->retry_hwerror = 1;
265
266 /*
267 * USB disks should allow restart. Some drives spin down
268 * automatically, requiring a START-STOP UNIT command.
269 */
270 sdev->allow_restart = 1;
271
272 /*
273 * Some USB cardreaders have trouble reading an sdcard's last
274 * sector in a larger then 1 sector read, since the performance
275 * impact is negligible we set this flag for all USB disks
276 */
277 sdev->last_sector_bug = 1;
278
279 /*
280 * Enable last-sector hacks for single-target devices using
281 * the Bulk-only transport, unless we already know the
282 * capacity will be decremented or is correct.
283 */
284 if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
285 US_FL_SCM_MULT_TARG)) &&
286 us->protocol == USB_PR_BULK)
287 us->use_last_sector_hacks = 1;
288
289 /* Check if write cache default on flag is set or not */
290 if (us->fflags & US_FL_WRITE_CACHE)
291 sdev->wce_default_on = 1;
292
293 /* A few buggy USB-ATA bridges don't understand FUA */
294 if (us->fflags & US_FL_BROKEN_FUA)
295 sdev->broken_fua = 1;
296
297 /* Some even totally fail to indicate a cache */
298 if (us->fflags & US_FL_ALWAYS_SYNC) {
299 /* don't read caching information */
300 sdev->skip_ms_page_8 = 1;
301 sdev->skip_ms_page_3f = 1;
302 /* assume sync is needed */
303 sdev->wce_default_on = 1;
304 }
305 } else {
306
307 /*
308 * Non-disk-type devices don't need to ignore any pages
309 * or to force 192-byte transfer lengths for MODE SENSE.
310 * But they do need to use MODE SENSE(10).
311 */
312 sdev->use_10_for_ms = 1;
313
314 /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
315 if (us->fflags & US_FL_NO_READ_DISC_INFO)
316 sdev->no_read_disc_info = 1;
317 }
318
319 /*
320 * The CB and CBI transports have no way to pass LUN values
321 * other than the bits in the second byte of a CDB. But those
322 * bits don't get set to the LUN value if the device reports
323 * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
324 * be single-LUN.
325 */
326 if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
327 sdev->scsi_level == SCSI_UNKNOWN)
328 us->max_lun = 0;
329
330 /*
331 * Some devices choke when they receive a PREVENT-ALLOW MEDIUM
332 * REMOVAL command, so suppress those commands.
333 */
334 if (us->fflags & US_FL_NOT_LOCKABLE)
335 sdev->lockable = 0;
336
337 /*
338 * this is to satisfy the compiler, tho I don't think the
339 * return code is ever checked anywhere.
340 */
341 return 0;
342}
343
344static int target_alloc(struct scsi_target *starget)
345{
346 struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
347
348 /*
349 * Some USB drives don't support REPORT LUNS, even though they
350 * report a SCSI revision level above 2. Tell the SCSI layer
351 * not to issue that command; it will perform a normal sequential
352 * scan instead.
353 */
354 starget->no_report_luns = 1;
355
356 /*
357 * The UFI spec treats the Peripheral Qualifier bits in an
358 * INQUIRY result as reserved and requires devices to set them
359 * to 0. However the SCSI spec requires these bits to be set
360 * to 3 to indicate when a LUN is not present.
361 *
362 * Let the scanning code know if this target merely sets
363 * Peripheral Device Type to 0x1f to indicate no LUN.
364 */
365 if (us->subclass == USB_SC_UFI)
366 starget->pdt_1f_for_no_lun = 1;
367
368 return 0;
369}
370
371/* queue a command */
372/* This is always called with scsi_lock(host) held */
373static int queuecommand_lck(struct scsi_cmnd *srb)
374{
375 void (*done)(struct scsi_cmnd *) = scsi_done;
376 struct us_data *us = host_to_us(srb->device->host);
377
378 /* check for state-transition errors */
379 if (us->srb != NULL) {
380 dev_err(&us->pusb_intf->dev,
381 "Error in %s: us->srb = %p\n", __func__, us->srb);
382 return SCSI_MLQUEUE_HOST_BUSY;
383 }
384
385 /* fail the command if we are disconnecting */
386 if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
387 usb_stor_dbg(us, "Fail command during disconnect\n");
388 srb->result = DID_NO_CONNECT << 16;
389 done(srb);
390 return 0;
391 }
392
393 if ((us->fflags & US_FL_NO_ATA_1X) &&
394 (srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) {
395 memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB,
396 sizeof(usb_stor_sense_invalidCDB));
397 srb->result = SAM_STAT_CHECK_CONDITION;
398 done(srb);
399 return 0;
400 }
401
402 /* enqueue the command and wake up the control thread */
403 us->srb = srb;
404 complete(&us->cmnd_ready);
405
406 return 0;
407}
408
409static DEF_SCSI_QCMD(queuecommand)
410
411/***********************************************************************
412 * Error handling functions
413 ***********************************************************************/
414
415/* Command timeout and abort */
416static int command_abort_matching(struct us_data *us, struct scsi_cmnd *srb_match)
417{
418 /*
419 * us->srb together with the TIMED_OUT, RESETTING, and ABORTING
420 * bits are protected by the host lock.
421 */
422 scsi_lock(us_to_host(us));
423
424 /* is there any active pending command to abort ? */
425 if (!us->srb) {
426 scsi_unlock(us_to_host(us));
427 usb_stor_dbg(us, "-- nothing to abort\n");
428 return SUCCESS;
429 }
430
431 /* Does the command match the passed srb if any ? */
432 if (srb_match && us->srb != srb_match) {
433 scsi_unlock(us_to_host(us));
434 usb_stor_dbg(us, "-- pending command mismatch\n");
435 return FAILED;
436 }
437
438 /*
439 * Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
440 * a device reset isn't already in progress (to avoid interfering
441 * with the reset). Note that we must retain the host lock while
442 * calling usb_stor_stop_transport(); otherwise it might interfere
443 * with an auto-reset that begins as soon as we release the lock.
444 */
445 set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
446 if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
447 set_bit(US_FLIDX_ABORTING, &us->dflags);
448 usb_stor_stop_transport(us);
449 }
450 scsi_unlock(us_to_host(us));
451
452 /* Wait for the aborted command to finish */
453 wait_for_completion(&us->notify);
454 return SUCCESS;
455}
456
457static int command_abort(struct scsi_cmnd *srb)
458{
459 struct us_data *us = host_to_us(srb->device->host);
460
461 usb_stor_dbg(us, "%s called\n", __func__);
462 return command_abort_matching(us, srb);
463}
464
465/*
466 * This invokes the transport reset mechanism to reset the state of the
467 * device
468 */
469static int device_reset(struct scsi_cmnd *srb)
470{
471 struct us_data *us = host_to_us(srb->device->host);
472 int result;
473
474 usb_stor_dbg(us, "%s called\n", __func__);
475
476 /* abort any pending command before reset */
477 command_abort_matching(us, NULL);
478
479 /* lock the device pointers and do the reset */
480 mutex_lock(&(us->dev_mutex));
481 result = us->transport_reset(us);
482 mutex_unlock(&us->dev_mutex);
483
484 return result < 0 ? FAILED : SUCCESS;
485}
486
487/* Simulate a SCSI bus reset by resetting the device's USB port. */
488static int bus_reset(struct scsi_cmnd *srb)
489{
490 struct us_data *us = host_to_us(srb->device->host);
491 int result;
492
493 usb_stor_dbg(us, "%s called\n", __func__);
494
495 result = usb_stor_port_reset(us);
496 return result < 0 ? FAILED : SUCCESS;
497}
498
499/*
500 * Report a driver-initiated device reset to the SCSI layer.
501 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
502 * The caller must own the SCSI host lock.
503 */
504void usb_stor_report_device_reset(struct us_data *us)
505{
506 int i;
507 struct Scsi_Host *host = us_to_host(us);
508
509 scsi_report_device_reset(host, 0, 0);
510 if (us->fflags & US_FL_SCM_MULT_TARG) {
511 for (i = 1; i < host->max_id; ++i)
512 scsi_report_device_reset(host, 0, i);
513 }
514}
515
516/*
517 * Report a driver-initiated bus reset to the SCSI layer.
518 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
519 * The caller must not own the SCSI host lock.
520 */
521void usb_stor_report_bus_reset(struct us_data *us)
522{
523 struct Scsi_Host *host = us_to_host(us);
524
525 scsi_lock(host);
526 scsi_report_bus_reset(host, 0);
527 scsi_unlock(host);
528}
529
530/***********************************************************************
531 * /proc/scsi/ functions
532 ***********************************************************************/
533
534static int write_info(struct Scsi_Host *host, char *buffer, int length)
535{
536 /* if someone is sending us data, just throw it away */
537 return length;
538}
539
540static int show_info (struct seq_file *m, struct Scsi_Host *host)
541{
542 struct us_data *us = host_to_us(host);
543 const char *string;
544
545 /* print the controller name */
546 seq_printf(m, " Host scsi%d: usb-storage\n", host->host_no);
547
548 /* print product, vendor, and serial number strings */
549 if (us->pusb_dev->manufacturer)
550 string = us->pusb_dev->manufacturer;
551 else if (us->unusual_dev->vendorName)
552 string = us->unusual_dev->vendorName;
553 else
554 string = "Unknown";
555 seq_printf(m, " Vendor: %s\n", string);
556 if (us->pusb_dev->product)
557 string = us->pusb_dev->product;
558 else if (us->unusual_dev->productName)
559 string = us->unusual_dev->productName;
560 else
561 string = "Unknown";
562 seq_printf(m, " Product: %s\n", string);
563 if (us->pusb_dev->serial)
564 string = us->pusb_dev->serial;
565 else
566 string = "None";
567 seq_printf(m, "Serial Number: %s\n", string);
568
569 /* show the protocol and transport */
570 seq_printf(m, " Protocol: %s\n", us->protocol_name);
571 seq_printf(m, " Transport: %s\n", us->transport_name);
572
573 /* show the device flags */
574 seq_printf(m, " Quirks:");
575
576#define US_FLAG(name, value) \
577 if (us->fflags & value) seq_printf(m, " " #name);
578US_DO_ALL_FLAGS
579#undef US_FLAG
580 seq_putc(m, '\n');
581 return 0;
582}
583
584/***********************************************************************
585 * Sysfs interface
586 ***********************************************************************/
587
588/* Output routine for the sysfs max_sectors file */
589static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf)
590{
591 struct scsi_device *sdev = to_scsi_device(dev);
592
593 return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
594}
595
596/* Input routine for the sysfs max_sectors file */
597static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf,
598 size_t count)
599{
600 struct scsi_device *sdev = to_scsi_device(dev);
601 unsigned short ms;
602
603 if (sscanf(buf, "%hu", &ms) > 0) {
604 blk_queue_max_hw_sectors(sdev->request_queue, ms);
605 return count;
606 }
607 return -EINVAL;
608}
609static DEVICE_ATTR_RW(max_sectors);
610
611static struct attribute *usb_sdev_attrs[] = {
612 &dev_attr_max_sectors.attr,
613 NULL,
614};
615
616ATTRIBUTE_GROUPS(usb_sdev);
617
618/*
619 * this defines our host template, with which we'll allocate hosts
620 */
621
622static const struct scsi_host_template usb_stor_host_template = {
623 /* basic userland interface stuff */
624 .name = "usb-storage",
625 .proc_name = "usb-storage",
626 .show_info = show_info,
627 .write_info = write_info,
628 .info = host_info,
629
630 /* command interface -- queued only */
631 .queuecommand = queuecommand,
632
633 /* error and abort handlers */
634 .eh_abort_handler = command_abort,
635 .eh_device_reset_handler = device_reset,
636 .eh_bus_reset_handler = bus_reset,
637
638 /* queue commands only, only one command per LUN */
639 .can_queue = 1,
640
641 /* unknown initiator id */
642 .this_id = -1,
643
644 .slave_alloc = slave_alloc,
645 .slave_configure = slave_configure,
646 .target_alloc = target_alloc,
647
648 /* lots of sg segments can be handled */
649 .sg_tablesize = SG_MAX_SEGMENTS,
650
651
652 /*
653 * Limit the total size of a transfer to 120 KB.
654 *
655 * Some devices are known to choke with anything larger. It seems like
656 * the problem stems from the fact that original IDE controllers had
657 * only an 8-bit register to hold the number of sectors in one transfer
658 * and even those couldn't handle a full 256 sectors.
659 *
660 * Because we want to make sure we interoperate with as many devices as
661 * possible, we will maintain a 240 sector transfer size limit for USB
662 * Mass Storage devices.
663 *
664 * Tests show that other operating have similar limits with Microsoft
665 * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3
666 * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2
667 * and 2048 for USB3 devices.
668 */
669 .max_sectors = 240,
670
671 /* emulated HBA */
672 .emulated = 1,
673
674 /* we do our own delay after a device or bus reset */
675 .skip_settle_delay = 1,
676
677 /* sysfs device attributes */
678 .sdev_groups = usb_sdev_groups,
679
680 /* module management */
681 .module = THIS_MODULE
682};
683
684void usb_stor_host_template_init(struct scsi_host_template *sht,
685 const char *name, struct module *owner)
686{
687 *sht = usb_stor_host_template;
688 sht->name = name;
689 sht->proc_name = name;
690 sht->module = owner;
691}
692EXPORT_SYMBOL_GPL(usb_stor_host_template_init);
693
694/* To Report "Illegal Request: Invalid Field in CDB */
695unsigned char usb_stor_sense_invalidCDB[18] = {
696 [0] = 0x70, /* current error */
697 [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */
698 [7] = 0x0a, /* additional length */
699 [12] = 0x24 /* Invalid Field in CDB */
700};
701EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);