Loading...
1/*
2 * Edgeport USB Serial Converter driver
3 *
4 * Copyright (C) 2000-2002 Inside Out Networks, All rights reserved.
5 * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * Supports the following devices:
13 * EP/1 EP/2 EP/4 EP/21 EP/22 EP/221 EP/42 EP/421 WATCHPORT
14 *
15 * For questions or problems with this driver, contact Inside Out
16 * Networks technical support, or Peter Berger <pberger@brimson.com>,
17 * or Al Borchers <alborchers@steinerpoint.com>.
18 *
19 * Version history:
20 *
21 * July 11, 2002 Removed 4 port device structure since all TI UMP
22 * chips have only 2 ports
23 * David Iacovelli (davidi@ionetworks.com)
24 *
25 */
26
27#include <linux/kernel.h>
28#include <linux/jiffies.h>
29#include <linux/errno.h>
30#include <linux/init.h>
31#include <linux/slab.h>
32#include <linux/tty.h>
33#include <linux/tty_driver.h>
34#include <linux/tty_flip.h>
35#include <linux/module.h>
36#include <linux/spinlock.h>
37#include <linux/mutex.h>
38#include <linux/serial.h>
39#include <linux/kfifo.h>
40#include <linux/ioctl.h>
41#include <linux/firmware.h>
42#include <linux/uaccess.h>
43#include <linux/usb.h>
44#include <linux/usb/serial.h>
45
46#include "io_16654.h"
47#include "io_usbvend.h"
48#include "io_ti.h"
49
50/*
51 * Version Information
52 */
53#define DRIVER_VERSION "v0.7mode043006"
54#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
55#define DRIVER_DESC "Edgeport USB Serial Driver"
56
57#define EPROM_PAGE_SIZE 64
58
59
60/* different hardware types */
61#define HARDWARE_TYPE_930 0
62#define HARDWARE_TYPE_TIUMP 1
63
64/* IOCTL_PRIVATE_TI_GET_MODE Definitions */
65#define TI_MODE_CONFIGURING 0 /* Device has not entered start device */
66#define TI_MODE_BOOT 1 /* Staying in boot mode */
67#define TI_MODE_DOWNLOAD 2 /* Made it to download mode */
68#define TI_MODE_TRANSITIONING 3 /* Currently in boot mode but
69 transitioning to download mode */
70
71/* read urb state */
72#define EDGE_READ_URB_RUNNING 0
73#define EDGE_READ_URB_STOPPING 1
74#define EDGE_READ_URB_STOPPED 2
75
76#define EDGE_CLOSING_WAIT 4000 /* in .01 sec */
77
78#define EDGE_OUT_BUF_SIZE 1024
79
80
81/* Product information read from the Edgeport */
82struct product_info {
83 int TiMode; /* Current TI Mode */
84 __u8 hardware_type; /* Type of hardware */
85} __attribute__((packed));
86
87struct edgeport_port {
88 __u16 uart_base;
89 __u16 dma_address;
90 __u8 shadow_msr;
91 __u8 shadow_mcr;
92 __u8 shadow_lsr;
93 __u8 lsr_mask;
94 __u32 ump_read_timeout; /* Number of milliseconds the UMP will
95 wait without data before completing
96 a read short */
97 int baud_rate;
98 int close_pending;
99 int lsr_event;
100 struct async_icount icount;
101 wait_queue_head_t delta_msr_wait; /* for handling sleeping while
102 waiting for msr change to
103 happen */
104 struct edgeport_serial *edge_serial;
105 struct usb_serial_port *port;
106 __u8 bUartMode; /* Port type, 0: RS232, etc. */
107 spinlock_t ep_lock;
108 int ep_read_urb_state;
109 int ep_write_urb_in_use;
110 struct kfifo write_fifo;
111};
112
113struct edgeport_serial {
114 struct product_info product_info;
115 u8 TI_I2C_Type; /* Type of I2C in UMP */
116 u8 TiReadI2C; /* Set to TRUE if we have read the
117 I2c in Boot Mode */
118 struct mutex es_lock;
119 int num_ports_open;
120 struct usb_serial *serial;
121};
122
123
124/* Devices that this driver supports */
125static const struct usb_device_id edgeport_1port_id_table[] = {
126 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
127 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
128 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
129 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
130 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
131 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
132 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
133 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
134 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
135 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
136 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
137 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
138 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
139 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
140 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
141 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
142 { }
143};
144
145static const struct usb_device_id edgeport_2port_id_table[] = {
146 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
147 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
148 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
149 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
150 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
151 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
152 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
153 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
154 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
155 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
156 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
157 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
158 /* The 4, 8 and 16 port devices show up as multiple 2 port devices */
159 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
160 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
161 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
162 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
163 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
164 { }
165};
166
167/* Devices that this driver supports */
168static const struct usb_device_id id_table_combined[] = {
169 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
170 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
171 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
172 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
173 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
174 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
175 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
176 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
177 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
178 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
179 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
180 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
181 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
182 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
183 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
184 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
185 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
186 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
187 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
188 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
189 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
190 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
191 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
192 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
193 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
194 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
195 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
196 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
197 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
198 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
199 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
200 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
201 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
202 { }
203};
204
205MODULE_DEVICE_TABLE(usb, id_table_combined);
206
207static struct usb_driver io_driver = {
208 .name = "io_ti",
209 .probe = usb_serial_probe,
210 .disconnect = usb_serial_disconnect,
211 .id_table = id_table_combined,
212 .no_dynamic_id = 1,
213};
214
215
216static unsigned char OperationalMajorVersion;
217static unsigned char OperationalMinorVersion;
218static unsigned short OperationalBuildNumber;
219
220static int debug;
221
222static int closing_wait = EDGE_CLOSING_WAIT;
223static int ignore_cpu_rev;
224static int default_uart_mode; /* RS232 */
225
226static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
227 unsigned char *data, int length);
228
229static void stop_read(struct edgeport_port *edge_port);
230static int restart_read(struct edgeport_port *edge_port);
231
232static void edge_set_termios(struct tty_struct *tty,
233 struct usb_serial_port *port, struct ktermios *old_termios);
234static void edge_send(struct tty_struct *tty);
235
236/* sysfs attributes */
237static int edge_create_sysfs_attrs(struct usb_serial_port *port);
238static int edge_remove_sysfs_attrs(struct usb_serial_port *port);
239
240
241static int ti_vread_sync(struct usb_device *dev, __u8 request,
242 __u16 value, __u16 index, u8 *data, int size)
243{
244 int status;
245
246 status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
247 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
248 value, index, data, size, 1000);
249 if (status < 0)
250 return status;
251 if (status != size) {
252 dbg("%s - wanted to write %d, but only wrote %d",
253 __func__, size, status);
254 return -ECOMM;
255 }
256 return 0;
257}
258
259static int ti_vsend_sync(struct usb_device *dev, __u8 request,
260 __u16 value, __u16 index, u8 *data, int size)
261{
262 int status;
263
264 status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
265 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
266 value, index, data, size, 1000);
267 if (status < 0)
268 return status;
269 if (status != size) {
270 dbg("%s - wanted to write %d, but only wrote %d",
271 __func__, size, status);
272 return -ECOMM;
273 }
274 return 0;
275}
276
277static int send_cmd(struct usb_device *dev, __u8 command,
278 __u8 moduleid, __u16 value, u8 *data,
279 int size)
280{
281 return ti_vsend_sync(dev, command, value, moduleid, data, size);
282}
283
284/* clear tx/rx buffers and fifo in TI UMP */
285static int purge_port(struct usb_serial_port *port, __u16 mask)
286{
287 int port_number = port->number - port->serial->minor;
288
289 dbg("%s - port %d, mask %x", __func__, port_number, mask);
290
291 return send_cmd(port->serial->dev,
292 UMPC_PURGE_PORT,
293 (__u8)(UMPM_UART1_PORT + port_number),
294 mask,
295 NULL,
296 0);
297}
298
299/**
300 * read_download_mem - Read edgeport memory from TI chip
301 * @dev: usb device pointer
302 * @start_address: Device CPU address at which to read
303 * @length: Length of above data
304 * @address_type: Can read both XDATA and I2C
305 * @buffer: pointer to input data buffer
306 */
307static int read_download_mem(struct usb_device *dev, int start_address,
308 int length, __u8 address_type, __u8 *buffer)
309{
310 int status = 0;
311 __u8 read_length;
312 __be16 be_start_address;
313
314 dbg("%s - @ %x for %d", __func__, start_address, length);
315
316 /* Read in blocks of 64 bytes
317 * (TI firmware can't handle more than 64 byte reads)
318 */
319 while (length) {
320 if (length > 64)
321 read_length = 64;
322 else
323 read_length = (__u8)length;
324
325 if (read_length > 1) {
326 dbg("%s - @ %x for %d", __func__,
327 start_address, read_length);
328 }
329 be_start_address = cpu_to_be16(start_address);
330 status = ti_vread_sync(dev, UMPC_MEMORY_READ,
331 (__u16)address_type,
332 (__force __u16)be_start_address,
333 buffer, read_length);
334
335 if (status) {
336 dbg("%s - ERROR %x", __func__, status);
337 return status;
338 }
339
340 if (read_length > 1)
341 usb_serial_debug_data(debug, &dev->dev, __func__,
342 read_length, buffer);
343
344 /* Update pointers/length */
345 start_address += read_length;
346 buffer += read_length;
347 length -= read_length;
348 }
349
350 return status;
351}
352
353static int read_ram(struct usb_device *dev, int start_address,
354 int length, __u8 *buffer)
355{
356 return read_download_mem(dev, start_address, length,
357 DTK_ADDR_SPACE_XDATA, buffer);
358}
359
360/* Read edgeport memory to a given block */
361static int read_boot_mem(struct edgeport_serial *serial,
362 int start_address, int length, __u8 *buffer)
363{
364 int status = 0;
365 int i;
366
367 for (i = 0; i < length; i++) {
368 status = ti_vread_sync(serial->serial->dev,
369 UMPC_MEMORY_READ, serial->TI_I2C_Type,
370 (__u16)(start_address+i), &buffer[i], 0x01);
371 if (status) {
372 dbg("%s - ERROR %x", __func__, status);
373 return status;
374 }
375 }
376
377 dbg("%s - start_address = %x, length = %d",
378 __func__, start_address, length);
379 usb_serial_debug_data(debug, &serial->serial->dev->dev,
380 __func__, length, buffer);
381
382 serial->TiReadI2C = 1;
383
384 return status;
385}
386
387/* Write given block to TI EPROM memory */
388static int write_boot_mem(struct edgeport_serial *serial,
389 int start_address, int length, __u8 *buffer)
390{
391 int status = 0;
392 int i;
393 u8 *temp;
394
395 /* Must do a read before write */
396 if (!serial->TiReadI2C) {
397 temp = kmalloc(1, GFP_KERNEL);
398 if (!temp) {
399 dev_err(&serial->serial->dev->dev,
400 "%s - out of memory\n", __func__);
401 return -ENOMEM;
402 }
403 status = read_boot_mem(serial, 0, 1, temp);
404 kfree(temp);
405 if (status)
406 return status;
407 }
408
409 for (i = 0; i < length; ++i) {
410 status = ti_vsend_sync(serial->serial->dev,
411 UMPC_MEMORY_WRITE, buffer[i],
412 (__u16)(i + start_address), NULL, 0);
413 if (status)
414 return status;
415 }
416
417 dbg("%s - start_sddr = %x, length = %d",
418 __func__, start_address, length);
419 usb_serial_debug_data(debug, &serial->serial->dev->dev,
420 __func__, length, buffer);
421
422 return status;
423}
424
425
426/* Write edgeport I2C memory to TI chip */
427static int write_i2c_mem(struct edgeport_serial *serial,
428 int start_address, int length, __u8 address_type, __u8 *buffer)
429{
430 int status = 0;
431 int write_length;
432 __be16 be_start_address;
433
434 /* We can only send a maximum of 1 aligned byte page at a time */
435
436 /* calculate the number of bytes left in the first page */
437 write_length = EPROM_PAGE_SIZE -
438 (start_address & (EPROM_PAGE_SIZE - 1));
439
440 if (write_length > length)
441 write_length = length;
442
443 dbg("%s - BytesInFirstPage Addr = %x, length = %d",
444 __func__, start_address, write_length);
445 usb_serial_debug_data(debug, &serial->serial->dev->dev,
446 __func__, write_length, buffer);
447
448 /* Write first page */
449 be_start_address = cpu_to_be16(start_address);
450 status = ti_vsend_sync(serial->serial->dev,
451 UMPC_MEMORY_WRITE, (__u16)address_type,
452 (__force __u16)be_start_address,
453 buffer, write_length);
454 if (status) {
455 dbg("%s - ERROR %d", __func__, status);
456 return status;
457 }
458
459 length -= write_length;
460 start_address += write_length;
461 buffer += write_length;
462
463 /* We should be aligned now -- can write
464 max page size bytes at a time */
465 while (length) {
466 if (length > EPROM_PAGE_SIZE)
467 write_length = EPROM_PAGE_SIZE;
468 else
469 write_length = length;
470
471 dbg("%s - Page Write Addr = %x, length = %d",
472 __func__, start_address, write_length);
473 usb_serial_debug_data(debug, &serial->serial->dev->dev,
474 __func__, write_length, buffer);
475
476 /* Write next page */
477 be_start_address = cpu_to_be16(start_address);
478 status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
479 (__u16)address_type,
480 (__force __u16)be_start_address,
481 buffer, write_length);
482 if (status) {
483 dev_err(&serial->serial->dev->dev, "%s - ERROR %d\n",
484 __func__, status);
485 return status;
486 }
487
488 length -= write_length;
489 start_address += write_length;
490 buffer += write_length;
491 }
492 return status;
493}
494
495/* Examine the UMP DMA registers and LSR
496 *
497 * Check the MSBit of the X and Y DMA byte count registers.
498 * A zero in this bit indicates that the TX DMA buffers are empty
499 * then check the TX Empty bit in the UART.
500 */
501static int tx_active(struct edgeport_port *port)
502{
503 int status;
504 struct out_endpoint_desc_block *oedb;
505 __u8 *lsr;
506 int bytes_left = 0;
507
508 oedb = kmalloc(sizeof(*oedb), GFP_KERNEL);
509 if (!oedb) {
510 dev_err(&port->port->dev, "%s - out of memory\n", __func__);
511 return -ENOMEM;
512 }
513
514 lsr = kmalloc(1, GFP_KERNEL); /* Sigh, that's right, just one byte,
515 as not all platforms can do DMA
516 from stack */
517 if (!lsr) {
518 kfree(oedb);
519 return -ENOMEM;
520 }
521 /* Read the DMA Count Registers */
522 status = read_ram(port->port->serial->dev, port->dma_address,
523 sizeof(*oedb), (void *)oedb);
524 if (status)
525 goto exit_is_tx_active;
526
527 dbg("%s - XByteCount 0x%X", __func__, oedb->XByteCount);
528
529 /* and the LSR */
530 status = read_ram(port->port->serial->dev,
531 port->uart_base + UMPMEM_OFFS_UART_LSR, 1, lsr);
532
533 if (status)
534 goto exit_is_tx_active;
535 dbg("%s - LSR = 0x%X", __func__, *lsr);
536
537 /* If either buffer has data or we are transmitting then return TRUE */
538 if ((oedb->XByteCount & 0x80) != 0)
539 bytes_left += 64;
540
541 if ((*lsr & UMP_UART_LSR_TX_MASK) == 0)
542 bytes_left += 1;
543
544 /* We return Not Active if we get any kind of error */
545exit_is_tx_active:
546 dbg("%s - return %d", __func__, bytes_left);
547
548 kfree(lsr);
549 kfree(oedb);
550 return bytes_left;
551}
552
553static void chase_port(struct edgeport_port *port, unsigned long timeout,
554 int flush)
555{
556 int baud_rate;
557 struct tty_struct *tty = tty_port_tty_get(&port->port->port);
558 wait_queue_t wait;
559 unsigned long flags;
560
561 if (!timeout)
562 timeout = (HZ * EDGE_CLOSING_WAIT)/100;
563
564 /* wait for data to drain from the buffer */
565 spin_lock_irqsave(&port->ep_lock, flags);
566 init_waitqueue_entry(&wait, current);
567 add_wait_queue(&tty->write_wait, &wait);
568 for (;;) {
569 set_current_state(TASK_INTERRUPTIBLE);
570 if (kfifo_len(&port->write_fifo) == 0
571 || timeout == 0 || signal_pending(current)
572 || !usb_get_intfdata(port->port->serial->interface))
573 /* disconnect */
574 break;
575 spin_unlock_irqrestore(&port->ep_lock, flags);
576 timeout = schedule_timeout(timeout);
577 spin_lock_irqsave(&port->ep_lock, flags);
578 }
579 set_current_state(TASK_RUNNING);
580 remove_wait_queue(&tty->write_wait, &wait);
581 if (flush)
582 kfifo_reset_out(&port->write_fifo);
583 spin_unlock_irqrestore(&port->ep_lock, flags);
584 tty_kref_put(tty);
585
586 /* wait for data to drain from the device */
587 timeout += jiffies;
588 while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
589 && usb_get_intfdata(port->port->serial->interface)) {
590 /* not disconnected */
591 if (!tx_active(port))
592 break;
593 msleep(10);
594 }
595
596 /* disconnected */
597 if (!usb_get_intfdata(port->port->serial->interface))
598 return;
599
600 /* wait one more character time, based on baud rate */
601 /* (tx_active doesn't seem to wait for the last byte) */
602 baud_rate = port->baud_rate;
603 if (baud_rate == 0)
604 baud_rate = 50;
605 msleep(max(1, DIV_ROUND_UP(10000, baud_rate)));
606}
607
608static int choose_config(struct usb_device *dev)
609{
610 /*
611 * There may be multiple configurations on this device, in which case
612 * we would need to read and parse all of them to find out which one
613 * we want. However, we just support one config at this point,
614 * configuration # 1, which is Config Descriptor 0.
615 */
616
617 dbg("%s - Number of Interfaces = %d",
618 __func__, dev->config->desc.bNumInterfaces);
619 dbg("%s - MAX Power = %d",
620 __func__, dev->config->desc.bMaxPower * 2);
621
622 if (dev->config->desc.bNumInterfaces != 1) {
623 dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n",
624 __func__);
625 return -ENODEV;
626 }
627
628 return 0;
629}
630
631static int read_rom(struct edgeport_serial *serial,
632 int start_address, int length, __u8 *buffer)
633{
634 int status;
635
636 if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
637 status = read_download_mem(serial->serial->dev,
638 start_address,
639 length,
640 serial->TI_I2C_Type,
641 buffer);
642 } else {
643 status = read_boot_mem(serial, start_address, length,
644 buffer);
645 }
646 return status;
647}
648
649static int write_rom(struct edgeport_serial *serial, int start_address,
650 int length, __u8 *buffer)
651{
652 if (serial->product_info.TiMode == TI_MODE_BOOT)
653 return write_boot_mem(serial, start_address, length,
654 buffer);
655
656 if (serial->product_info.TiMode == TI_MODE_DOWNLOAD)
657 return write_i2c_mem(serial, start_address, length,
658 serial->TI_I2C_Type, buffer);
659 return -EINVAL;
660}
661
662
663
664/* Read a descriptor header from I2C based on type */
665static int get_descriptor_addr(struct edgeport_serial *serial,
666 int desc_type, struct ti_i2c_desc *rom_desc)
667{
668 int start_address;
669 int status;
670
671 /* Search for requested descriptor in I2C */
672 start_address = 2;
673 do {
674 status = read_rom(serial,
675 start_address,
676 sizeof(struct ti_i2c_desc),
677 (__u8 *)rom_desc);
678 if (status)
679 return 0;
680
681 if (rom_desc->Type == desc_type)
682 return start_address;
683
684 start_address = start_address + sizeof(struct ti_i2c_desc)
685 + rom_desc->Size;
686
687 } while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
688
689 return 0;
690}
691
692/* Validate descriptor checksum */
693static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer)
694{
695 __u16 i;
696 __u8 cs = 0;
697
698 for (i = 0; i < rom_desc->Size; i++)
699 cs = (__u8)(cs + buffer[i]);
700
701 if (cs != rom_desc->CheckSum) {
702 dbg("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
703 return -EINVAL;
704 }
705 return 0;
706}
707
708/* Make sure that the I2C image is good */
709static int check_i2c_image(struct edgeport_serial *serial)
710{
711 struct device *dev = &serial->serial->dev->dev;
712 int status = 0;
713 struct ti_i2c_desc *rom_desc;
714 int start_address = 2;
715 __u8 *buffer;
716 __u16 ttype;
717
718 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
719 if (!rom_desc) {
720 dev_err(dev, "%s - out of memory\n", __func__);
721 return -ENOMEM;
722 }
723 buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL);
724 if (!buffer) {
725 dev_err(dev, "%s - out of memory when allocating buffer\n",
726 __func__);
727 kfree(rom_desc);
728 return -ENOMEM;
729 }
730
731 /* Read the first byte (Signature0) must be 0x52 or 0x10 */
732 status = read_rom(serial, 0, 1, buffer);
733 if (status)
734 goto out;
735
736 if (*buffer != UMP5152 && *buffer != UMP3410) {
737 dev_err(dev, "%s - invalid buffer signature\n", __func__);
738 status = -ENODEV;
739 goto out;
740 }
741
742 do {
743 /* Validate the I2C */
744 status = read_rom(serial,
745 start_address,
746 sizeof(struct ti_i2c_desc),
747 (__u8 *)rom_desc);
748 if (status)
749 break;
750
751 if ((start_address + sizeof(struct ti_i2c_desc) +
752 rom_desc->Size) > TI_MAX_I2C_SIZE) {
753 status = -ENODEV;
754 dbg("%s - structure too big, erroring out.", __func__);
755 break;
756 }
757
758 dbg("%s Type = 0x%x", __func__, rom_desc->Type);
759
760 /* Skip type 2 record */
761 ttype = rom_desc->Type & 0x0f;
762 if (ttype != I2C_DESC_TYPE_FIRMWARE_BASIC
763 && ttype != I2C_DESC_TYPE_FIRMWARE_AUTO) {
764 /* Read the descriptor data */
765 status = read_rom(serial, start_address +
766 sizeof(struct ti_i2c_desc),
767 rom_desc->Size, buffer);
768 if (status)
769 break;
770
771 status = valid_csum(rom_desc, buffer);
772 if (status)
773 break;
774 }
775 start_address = start_address + sizeof(struct ti_i2c_desc) +
776 rom_desc->Size;
777
778 } while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
779 (start_address < TI_MAX_I2C_SIZE));
780
781 if ((rom_desc->Type != I2C_DESC_TYPE_ION) ||
782 (start_address > TI_MAX_I2C_SIZE))
783 status = -ENODEV;
784
785out:
786 kfree(buffer);
787 kfree(rom_desc);
788 return status;
789}
790
791static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer)
792{
793 int status;
794 int start_address;
795 struct ti_i2c_desc *rom_desc;
796 struct edge_ti_manuf_descriptor *desc;
797
798 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
799 if (!rom_desc) {
800 dev_err(&serial->serial->dev->dev, "%s - out of memory\n",
801 __func__);
802 return -ENOMEM;
803 }
804 start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
805 rom_desc);
806
807 if (!start_address) {
808 dbg("%s - Edge Descriptor not found in I2C", __func__);
809 status = -ENODEV;
810 goto exit;
811 }
812
813 /* Read the descriptor data */
814 status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
815 rom_desc->Size, buffer);
816 if (status)
817 goto exit;
818
819 status = valid_csum(rom_desc, buffer);
820
821 desc = (struct edge_ti_manuf_descriptor *)buffer;
822 dbg("%s - IonConfig 0x%x", __func__, desc->IonConfig);
823 dbg("%s - Version %d", __func__, desc->Version);
824 dbg("%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev);
825 dbg("%s - NumPorts %d", __func__, desc->NumPorts);
826 dbg("%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts);
827 dbg("%s - TotalPorts %d", __func__, desc->TotalPorts);
828
829exit:
830 kfree(rom_desc);
831 return status;
832}
833
834/* Build firmware header used for firmware update */
835static int build_i2c_fw_hdr(__u8 *header, struct device *dev)
836{
837 __u8 *buffer;
838 int buffer_size;
839 int i;
840 int err;
841 __u8 cs = 0;
842 struct ti_i2c_desc *i2c_header;
843 struct ti_i2c_image_header *img_header;
844 struct ti_i2c_firmware_rec *firmware_rec;
845 const struct firmware *fw;
846 const char *fw_name = "edgeport/down3.bin";
847
848 /* In order to update the I2C firmware we must change the type 2 record
849 * to type 0xF2. This will force the UMP to come up in Boot Mode.
850 * Then while in boot mode, the driver will download the latest
851 * firmware (padded to 15.5k) into the UMP ram. And finally when the
852 * device comes back up in download mode the driver will cause the new
853 * firmware to be copied from the UMP Ram to I2C and the firmware will
854 * update the record type from 0xf2 to 0x02.
855 */
856
857 /* Allocate a 15.5k buffer + 2 bytes for version number
858 * (Firmware Record) */
859 buffer_size = (((1024 * 16) - 512 ) +
860 sizeof(struct ti_i2c_firmware_rec));
861
862 buffer = kmalloc(buffer_size, GFP_KERNEL);
863 if (!buffer) {
864 dev_err(dev, "%s - out of memory\n", __func__);
865 return -ENOMEM;
866 }
867
868 // Set entire image of 0xffs
869 memset(buffer, 0xff, buffer_size);
870
871 err = request_firmware(&fw, fw_name, dev);
872 if (err) {
873 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
874 fw_name, err);
875 kfree(buffer);
876 return err;
877 }
878
879 /* Save Download Version Number */
880 OperationalMajorVersion = fw->data[0];
881 OperationalMinorVersion = fw->data[1];
882 OperationalBuildNumber = fw->data[2] | (fw->data[3] << 8);
883
884 /* Copy version number into firmware record */
885 firmware_rec = (struct ti_i2c_firmware_rec *)buffer;
886
887 firmware_rec->Ver_Major = OperationalMajorVersion;
888 firmware_rec->Ver_Minor = OperationalMinorVersion;
889
890 /* Pointer to fw_down memory image */
891 img_header = (struct ti_i2c_image_header *)&fw->data[4];
892
893 memcpy(buffer + sizeof(struct ti_i2c_firmware_rec),
894 &fw->data[4 + sizeof(struct ti_i2c_image_header)],
895 le16_to_cpu(img_header->Length));
896
897 release_firmware(fw);
898
899 for (i=0; i < buffer_size; i++) {
900 cs = (__u8)(cs + buffer[i]);
901 }
902
903 kfree(buffer);
904
905 /* Build new header */
906 i2c_header = (struct ti_i2c_desc *)header;
907 firmware_rec = (struct ti_i2c_firmware_rec*)i2c_header->Data;
908
909 i2c_header->Type = I2C_DESC_TYPE_FIRMWARE_BLANK;
910 i2c_header->Size = (__u16)buffer_size;
911 i2c_header->CheckSum = cs;
912 firmware_rec->Ver_Major = OperationalMajorVersion;
913 firmware_rec->Ver_Minor = OperationalMinorVersion;
914
915 return 0;
916}
917
918/* Try to figure out what type of I2c we have */
919static int i2c_type_bootmode(struct edgeport_serial *serial)
920{
921 int status;
922 u8 *data;
923
924 data = kmalloc(1, GFP_KERNEL);
925 if (!data) {
926 dev_err(&serial->serial->dev->dev,
927 "%s - out of memory\n", __func__);
928 return -ENOMEM;
929 }
930
931 /* Try to read type 2 */
932 status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
933 DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01);
934 if (status)
935 dbg("%s - read 2 status error = %d", __func__, status);
936 else
937 dbg("%s - read 2 data = 0x%x", __func__, *data);
938 if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
939 dbg("%s - ROM_TYPE_II", __func__);
940 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
941 goto out;
942 }
943
944 /* Try to read type 3 */
945 status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
946 DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01);
947 if (status)
948 dbg("%s - read 3 status error = %d", __func__, status);
949 else
950 dbg("%s - read 2 data = 0x%x", __func__, *data);
951 if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
952 dbg("%s - ROM_TYPE_III", __func__);
953 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
954 goto out;
955 }
956
957 dbg("%s - Unknown", __func__);
958 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
959 status = -ENODEV;
960out:
961 kfree(data);
962 return status;
963}
964
965static int bulk_xfer(struct usb_serial *serial, void *buffer,
966 int length, int *num_sent)
967{
968 int status;
969
970 status = usb_bulk_msg(serial->dev,
971 usb_sndbulkpipe(serial->dev,
972 serial->port[0]->bulk_out_endpointAddress),
973 buffer, length, num_sent, 1000);
974 return status;
975}
976
977/* Download given firmware image to the device (IN BOOT MODE) */
978static int download_code(struct edgeport_serial *serial, __u8 *image,
979 int image_length)
980{
981 int status = 0;
982 int pos;
983 int transfer;
984 int done;
985
986 /* Transfer firmware image */
987 for (pos = 0; pos < image_length; ) {
988 /* Read the next buffer from file */
989 transfer = image_length - pos;
990 if (transfer > EDGE_FW_BULK_MAX_PACKET_SIZE)
991 transfer = EDGE_FW_BULK_MAX_PACKET_SIZE;
992
993 /* Transfer data */
994 status = bulk_xfer(serial->serial, &image[pos],
995 transfer, &done);
996 if (status)
997 break;
998 /* Advance buffer pointer */
999 pos += done;
1000 }
1001
1002 return status;
1003}
1004
1005/* FIXME!!! */
1006static int config_boot_dev(struct usb_device *dev)
1007{
1008 return 0;
1009}
1010
1011static int ti_cpu_rev(struct edge_ti_manuf_descriptor *desc)
1012{
1013 return TI_GET_CPU_REVISION(desc->CpuRev_BoardRev);
1014}
1015
1016/**
1017 * DownloadTIFirmware - Download run-time operating firmware to the TI5052
1018 *
1019 * This routine downloads the main operating code into the TI5052, using the
1020 * boot code already burned into E2PROM or ROM.
1021 */
1022static int download_fw(struct edgeport_serial *serial)
1023{
1024 struct device *dev = &serial->serial->dev->dev;
1025 int status = 0;
1026 int start_address;
1027 struct edge_ti_manuf_descriptor *ti_manuf_desc;
1028 struct usb_interface_descriptor *interface;
1029 int download_cur_ver;
1030 int download_new_ver;
1031
1032 /* This routine is entered by both the BOOT mode and the Download mode
1033 * We can determine which code is running by the reading the config
1034 * descriptor and if we have only one bulk pipe it is in boot mode
1035 */
1036 serial->product_info.hardware_type = HARDWARE_TYPE_TIUMP;
1037
1038 /* Default to type 2 i2c */
1039 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
1040
1041 status = choose_config(serial->serial->dev);
1042 if (status)
1043 return status;
1044
1045 interface = &serial->serial->interface->cur_altsetting->desc;
1046 if (!interface) {
1047 dev_err(dev, "%s - no interface set, error!\n", __func__);
1048 return -ENODEV;
1049 }
1050
1051 /*
1052 * Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING
1053 * if we have more than one endpoint we are definitely in download
1054 * mode
1055 */
1056 if (interface->bNumEndpoints > 1)
1057 serial->product_info.TiMode = TI_MODE_DOWNLOAD;
1058 else
1059 /* Otherwise we will remain in configuring mode */
1060 serial->product_info.TiMode = TI_MODE_CONFIGURING;
1061
1062 /********************************************************************/
1063 /* Download Mode */
1064 /********************************************************************/
1065 if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
1066 struct ti_i2c_desc *rom_desc;
1067
1068 dbg("%s - RUNNING IN DOWNLOAD MODE", __func__);
1069
1070 status = check_i2c_image(serial);
1071 if (status) {
1072 dbg("%s - DOWNLOAD MODE -- BAD I2C", __func__);
1073 return status;
1074 }
1075
1076 /* Validate Hardware version number
1077 * Read Manufacturing Descriptor from TI Based Edgeport
1078 */
1079 ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
1080 if (!ti_manuf_desc) {
1081 dev_err(dev, "%s - out of memory.\n", __func__);
1082 return -ENOMEM;
1083 }
1084 status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
1085 if (status) {
1086 kfree(ti_manuf_desc);
1087 return status;
1088 }
1089
1090 /* Check version number of ION descriptor */
1091 if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
1092 dbg("%s - Wrong CPU Rev %d (Must be 2)",
1093 __func__, ti_cpu_rev(ti_manuf_desc));
1094 kfree(ti_manuf_desc);
1095 return -EINVAL;
1096 }
1097
1098 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
1099 if (!rom_desc) {
1100 dev_err(dev, "%s - out of memory.\n", __func__);
1101 kfree(ti_manuf_desc);
1102 return -ENOMEM;
1103 }
1104
1105 /* Search for type 2 record (firmware record) */
1106 start_address = get_descriptor_addr(serial,
1107 I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
1108 if (start_address != 0) {
1109 struct ti_i2c_firmware_rec *firmware_version;
1110 u8 *record;
1111
1112 dbg("%s - Found Type FIRMWARE (Type 2) record",
1113 __func__);
1114
1115 firmware_version = kmalloc(sizeof(*firmware_version),
1116 GFP_KERNEL);
1117 if (!firmware_version) {
1118 dev_err(dev, "%s - out of memory.\n", __func__);
1119 kfree(rom_desc);
1120 kfree(ti_manuf_desc);
1121 return -ENOMEM;
1122 }
1123
1124 /* Validate version number
1125 * Read the descriptor data
1126 */
1127 status = read_rom(serial, start_address +
1128 sizeof(struct ti_i2c_desc),
1129 sizeof(struct ti_i2c_firmware_rec),
1130 (__u8 *)firmware_version);
1131 if (status) {
1132 kfree(firmware_version);
1133 kfree(rom_desc);
1134 kfree(ti_manuf_desc);
1135 return status;
1136 }
1137
1138 /* Check version number of download with current
1139 version in I2c */
1140 download_cur_ver = (firmware_version->Ver_Major << 8) +
1141 (firmware_version->Ver_Minor);
1142 download_new_ver = (OperationalMajorVersion << 8) +
1143 (OperationalMinorVersion);
1144
1145 dbg("%s - >> FW Versions Device %d.%d Driver %d.%d",
1146 __func__,
1147 firmware_version->Ver_Major,
1148 firmware_version->Ver_Minor,
1149 OperationalMajorVersion,
1150 OperationalMinorVersion);
1151
1152 /* Check if we have an old version in the I2C and
1153 update if necessary */
1154 if (download_cur_ver < download_new_ver) {
1155 dbg("%s - Update I2C dld from %d.%d to %d.%d",
1156 __func__,
1157 firmware_version->Ver_Major,
1158 firmware_version->Ver_Minor,
1159 OperationalMajorVersion,
1160 OperationalMinorVersion);
1161
1162 record = kmalloc(1, GFP_KERNEL);
1163 if (!record) {
1164 dev_err(dev, "%s - out of memory.\n",
1165 __func__);
1166 kfree(firmware_version);
1167 kfree(rom_desc);
1168 kfree(ti_manuf_desc);
1169 return -ENOMEM;
1170 }
1171 /* In order to update the I2C firmware we must
1172 * change the type 2 record to type 0xF2. This
1173 * will force the UMP to come up in Boot Mode.
1174 * Then while in boot mode, the driver will
1175 * download the latest firmware (padded to
1176 * 15.5k) into the UMP ram. Finally when the
1177 * device comes back up in download mode the
1178 * driver will cause the new firmware to be
1179 * copied from the UMP Ram to I2C and the
1180 * firmware will update the record type from
1181 * 0xf2 to 0x02.
1182 */
1183 *record = I2C_DESC_TYPE_FIRMWARE_BLANK;
1184
1185 /* Change the I2C Firmware record type to
1186 0xf2 to trigger an update */
1187 status = write_rom(serial, start_address,
1188 sizeof(*record), record);
1189 if (status) {
1190 kfree(record);
1191 kfree(firmware_version);
1192 kfree(rom_desc);
1193 kfree(ti_manuf_desc);
1194 return status;
1195 }
1196
1197 /* verify the write -- must do this in order
1198 * for write to complete before we do the
1199 * hardware reset
1200 */
1201 status = read_rom(serial,
1202 start_address,
1203 sizeof(*record),
1204 record);
1205 if (status) {
1206 kfree(record);
1207 kfree(firmware_version);
1208 kfree(rom_desc);
1209 kfree(ti_manuf_desc);
1210 return status;
1211 }
1212
1213 if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
1214 dev_err(dev,
1215 "%s - error resetting device\n",
1216 __func__);
1217 kfree(record);
1218 kfree(firmware_version);
1219 kfree(rom_desc);
1220 kfree(ti_manuf_desc);
1221 return -ENODEV;
1222 }
1223
1224 dbg("%s - HARDWARE RESET", __func__);
1225
1226 /* Reset UMP -- Back to BOOT MODE */
1227 status = ti_vsend_sync(serial->serial->dev,
1228 UMPC_HARDWARE_RESET,
1229 0, 0, NULL, 0);
1230
1231 dbg("%s - HARDWARE RESET return %d",
1232 __func__, status);
1233
1234 /* return an error on purpose. */
1235 kfree(record);
1236 kfree(firmware_version);
1237 kfree(rom_desc);
1238 kfree(ti_manuf_desc);
1239 return -ENODEV;
1240 }
1241 kfree(firmware_version);
1242 }
1243 /* Search for type 0xF2 record (firmware blank record) */
1244 else if ((start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc)) != 0) {
1245#define HEADER_SIZE (sizeof(struct ti_i2c_desc) + \
1246 sizeof(struct ti_i2c_firmware_rec))
1247 __u8 *header;
1248 __u8 *vheader;
1249
1250 header = kmalloc(HEADER_SIZE, GFP_KERNEL);
1251 if (!header) {
1252 dev_err(dev, "%s - out of memory.\n", __func__);
1253 kfree(rom_desc);
1254 kfree(ti_manuf_desc);
1255 return -ENOMEM;
1256 }
1257
1258 vheader = kmalloc(HEADER_SIZE, GFP_KERNEL);
1259 if (!vheader) {
1260 dev_err(dev, "%s - out of memory.\n", __func__);
1261 kfree(header);
1262 kfree(rom_desc);
1263 kfree(ti_manuf_desc);
1264 return -ENOMEM;
1265 }
1266
1267 dbg("%s - Found Type BLANK FIRMWARE (Type F2) record",
1268 __func__);
1269
1270 /*
1271 * In order to update the I2C firmware we must change
1272 * the type 2 record to type 0xF2. This will force the
1273 * UMP to come up in Boot Mode. Then while in boot
1274 * mode, the driver will download the latest firmware
1275 * (padded to 15.5k) into the UMP ram. Finally when the
1276 * device comes back up in download mode the driver
1277 * will cause the new firmware to be copied from the
1278 * UMP Ram to I2C and the firmware will update the
1279 * record type from 0xf2 to 0x02.
1280 */
1281 status = build_i2c_fw_hdr(header, dev);
1282 if (status) {
1283 kfree(vheader);
1284 kfree(header);
1285 kfree(rom_desc);
1286 kfree(ti_manuf_desc);
1287 return -EINVAL;
1288 }
1289
1290 /* Update I2C with type 0xf2 record with correct
1291 size and checksum */
1292 status = write_rom(serial,
1293 start_address,
1294 HEADER_SIZE,
1295 header);
1296 if (status) {
1297 kfree(vheader);
1298 kfree(header);
1299 kfree(rom_desc);
1300 kfree(ti_manuf_desc);
1301 return -EINVAL;
1302 }
1303
1304 /* verify the write -- must do this in order for
1305 write to complete before we do the hardware reset */
1306 status = read_rom(serial, start_address,
1307 HEADER_SIZE, vheader);
1308
1309 if (status) {
1310 dbg("%s - can't read header back", __func__);
1311 kfree(vheader);
1312 kfree(header);
1313 kfree(rom_desc);
1314 kfree(ti_manuf_desc);
1315 return status;
1316 }
1317 if (memcmp(vheader, header, HEADER_SIZE)) {
1318 dbg("%s - write download record failed",
1319 __func__);
1320 kfree(vheader);
1321 kfree(header);
1322 kfree(rom_desc);
1323 kfree(ti_manuf_desc);
1324 return -EINVAL;
1325 }
1326
1327 kfree(vheader);
1328 kfree(header);
1329
1330 dbg("%s - Start firmware update", __func__);
1331
1332 /* Tell firmware to copy download image into I2C */
1333 status = ti_vsend_sync(serial->serial->dev,
1334 UMPC_COPY_DNLD_TO_I2C, 0, 0, NULL, 0);
1335
1336 dbg("%s - Update complete 0x%x", __func__, status);
1337 if (status) {
1338 dev_err(dev,
1339 "%s - UMPC_COPY_DNLD_TO_I2C failed\n",
1340 __func__);
1341 kfree(rom_desc);
1342 kfree(ti_manuf_desc);
1343 return status;
1344 }
1345 }
1346
1347 // The device is running the download code
1348 kfree(rom_desc);
1349 kfree(ti_manuf_desc);
1350 return 0;
1351 }
1352
1353 /********************************************************************/
1354 /* Boot Mode */
1355 /********************************************************************/
1356 dbg("%s - RUNNING IN BOOT MODE", __func__);
1357
1358 /* Configure the TI device so we can use the BULK pipes for download */
1359 status = config_boot_dev(serial->serial->dev);
1360 if (status)
1361 return status;
1362
1363 if (le16_to_cpu(serial->serial->dev->descriptor.idVendor)
1364 != USB_VENDOR_ID_ION) {
1365 dbg("%s - VID = 0x%x", __func__,
1366 le16_to_cpu(serial->serial->dev->descriptor.idVendor));
1367 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
1368 goto stayinbootmode;
1369 }
1370
1371 /* We have an ION device (I2c Must be programmed)
1372 Determine I2C image type */
1373 if (i2c_type_bootmode(serial))
1374 goto stayinbootmode;
1375
1376 /* Check for ION Vendor ID and that the I2C is valid */
1377 if (!check_i2c_image(serial)) {
1378 struct ti_i2c_image_header *header;
1379 int i;
1380 __u8 cs = 0;
1381 __u8 *buffer;
1382 int buffer_size;
1383 int err;
1384 const struct firmware *fw;
1385 const char *fw_name = "edgeport/down3.bin";
1386
1387 /* Validate Hardware version number
1388 * Read Manufacturing Descriptor from TI Based Edgeport
1389 */
1390 ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
1391 if (!ti_manuf_desc) {
1392 dev_err(dev, "%s - out of memory.\n", __func__);
1393 return -ENOMEM;
1394 }
1395 status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
1396 if (status) {
1397 kfree(ti_manuf_desc);
1398 goto stayinbootmode;
1399 }
1400
1401 /* Check for version 2 */
1402 if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
1403 dbg("%s - Wrong CPU Rev %d (Must be 2)",
1404 __func__, ti_cpu_rev(ti_manuf_desc));
1405 kfree(ti_manuf_desc);
1406 goto stayinbootmode;
1407 }
1408
1409 kfree(ti_manuf_desc);
1410
1411 /*
1412 * In order to update the I2C firmware we must change the type
1413 * 2 record to type 0xF2. This will force the UMP to come up
1414 * in Boot Mode. Then while in boot mode, the driver will
1415 * download the latest firmware (padded to 15.5k) into the
1416 * UMP ram. Finally when the device comes back up in download
1417 * mode the driver will cause the new firmware to be copied
1418 * from the UMP Ram to I2C and the firmware will update the
1419 * record type from 0xf2 to 0x02.
1420 *
1421 * Do we really have to copy the whole firmware image,
1422 * or could we do this in place!
1423 */
1424
1425 /* Allocate a 15.5k buffer + 3 byte header */
1426 buffer_size = (((1024 * 16) - 512) +
1427 sizeof(struct ti_i2c_image_header));
1428 buffer = kmalloc(buffer_size, GFP_KERNEL);
1429 if (!buffer) {
1430 dev_err(dev, "%s - out of memory\n", __func__);
1431 return -ENOMEM;
1432 }
1433
1434 /* Initialize the buffer to 0xff (pad the buffer) */
1435 memset(buffer, 0xff, buffer_size);
1436
1437 err = request_firmware(&fw, fw_name, dev);
1438 if (err) {
1439 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
1440 fw_name, err);
1441 kfree(buffer);
1442 return err;
1443 }
1444 memcpy(buffer, &fw->data[4], fw->size - 4);
1445 release_firmware(fw);
1446
1447 for (i = sizeof(struct ti_i2c_image_header);
1448 i < buffer_size; i++) {
1449 cs = (__u8)(cs + buffer[i]);
1450 }
1451
1452 header = (struct ti_i2c_image_header *)buffer;
1453
1454 /* update length and checksum after padding */
1455 header->Length = cpu_to_le16((__u16)(buffer_size -
1456 sizeof(struct ti_i2c_image_header)));
1457 header->CheckSum = cs;
1458
1459 /* Download the operational code */
1460 dbg("%s - Downloading operational code image (TI UMP)",
1461 __func__);
1462 status = download_code(serial, buffer, buffer_size);
1463
1464 kfree(buffer);
1465
1466 if (status) {
1467 dbg("%s - Error downloading operational code image",
1468 __func__);
1469 return status;
1470 }
1471
1472 /* Device will reboot */
1473 serial->product_info.TiMode = TI_MODE_TRANSITIONING;
1474
1475 dbg("%s - Download successful -- Device rebooting...",
1476 __func__);
1477
1478 /* return an error on purpose */
1479 return -ENODEV;
1480 }
1481
1482stayinbootmode:
1483 /* Eprom is invalid or blank stay in boot mode */
1484 dbg("%s - STAYING IN BOOT MODE", __func__);
1485 serial->product_info.TiMode = TI_MODE_BOOT;
1486
1487 return 0;
1488}
1489
1490
1491static int ti_do_config(struct edgeport_port *port, int feature, int on)
1492{
1493 int port_number = port->port->number - port->port->serial->minor;
1494 on = !!on; /* 1 or 0 not bitmask */
1495 return send_cmd(port->port->serial->dev,
1496 feature, (__u8)(UMPM_UART1_PORT + port_number),
1497 on, NULL, 0);
1498}
1499
1500
1501static int restore_mcr(struct edgeport_port *port, __u8 mcr)
1502{
1503 int status = 0;
1504
1505 dbg("%s - %x", __func__, mcr);
1506
1507 status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR);
1508 if (status)
1509 return status;
1510 status = ti_do_config(port, UMPC_SET_CLR_RTS, mcr & MCR_RTS);
1511 if (status)
1512 return status;
1513 return ti_do_config(port, UMPC_SET_CLR_LOOPBACK, mcr & MCR_LOOPBACK);
1514}
1515
1516/* Convert TI LSR to standard UART flags */
1517static __u8 map_line_status(__u8 ti_lsr)
1518{
1519 __u8 lsr = 0;
1520
1521#define MAP_FLAG(flagUmp, flagUart) \
1522 if (ti_lsr & flagUmp) \
1523 lsr |= flagUart;
1524
1525 MAP_FLAG(UMP_UART_LSR_OV_MASK, LSR_OVER_ERR) /* overrun */
1526 MAP_FLAG(UMP_UART_LSR_PE_MASK, LSR_PAR_ERR) /* parity error */
1527 MAP_FLAG(UMP_UART_LSR_FE_MASK, LSR_FRM_ERR) /* framing error */
1528 MAP_FLAG(UMP_UART_LSR_BR_MASK, LSR_BREAK) /* break detected */
1529 MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL) /* rx data available */
1530 MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY) /* tx hold reg empty */
1531
1532#undef MAP_FLAG
1533
1534 return lsr;
1535}
1536
1537static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
1538{
1539 struct async_icount *icount;
1540 struct tty_struct *tty;
1541
1542 dbg("%s - %02x", __func__, msr);
1543
1544 if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
1545 EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
1546 icount = &edge_port->icount;
1547
1548 /* update input line counters */
1549 if (msr & EDGEPORT_MSR_DELTA_CTS)
1550 icount->cts++;
1551 if (msr & EDGEPORT_MSR_DELTA_DSR)
1552 icount->dsr++;
1553 if (msr & EDGEPORT_MSR_DELTA_CD)
1554 icount->dcd++;
1555 if (msr & EDGEPORT_MSR_DELTA_RI)
1556 icount->rng++;
1557 wake_up_interruptible(&edge_port->delta_msr_wait);
1558 }
1559
1560 /* Save the new modem status */
1561 edge_port->shadow_msr = msr & 0xf0;
1562
1563 tty = tty_port_tty_get(&edge_port->port->port);
1564 /* handle CTS flow control */
1565 if (tty && C_CRTSCTS(tty)) {
1566 if (msr & EDGEPORT_MSR_CTS) {
1567 tty->hw_stopped = 0;
1568 tty_wakeup(tty);
1569 } else {
1570 tty->hw_stopped = 1;
1571 }
1572 }
1573 tty_kref_put(tty);
1574}
1575
1576static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
1577 __u8 lsr, __u8 data)
1578{
1579 struct async_icount *icount;
1580 __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR |
1581 LSR_FRM_ERR | LSR_BREAK));
1582 struct tty_struct *tty;
1583
1584 dbg("%s - %02x", __func__, new_lsr);
1585
1586 edge_port->shadow_lsr = lsr;
1587
1588 if (new_lsr & LSR_BREAK)
1589 /*
1590 * Parity and Framing errors only count if they
1591 * occur exclusive of a break being received.
1592 */
1593 new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
1594
1595 /* Place LSR data byte into Rx buffer */
1596 if (lsr_data) {
1597 tty = tty_port_tty_get(&edge_port->port->port);
1598 if (tty) {
1599 edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
1600 tty_kref_put(tty);
1601 }
1602 }
1603
1604 /* update input line counters */
1605 icount = &edge_port->icount;
1606 if (new_lsr & LSR_BREAK)
1607 icount->brk++;
1608 if (new_lsr & LSR_OVER_ERR)
1609 icount->overrun++;
1610 if (new_lsr & LSR_PAR_ERR)
1611 icount->parity++;
1612 if (new_lsr & LSR_FRM_ERR)
1613 icount->frame++;
1614}
1615
1616
1617static void edge_interrupt_callback(struct urb *urb)
1618{
1619 struct edgeport_serial *edge_serial = urb->context;
1620 struct usb_serial_port *port;
1621 struct edgeport_port *edge_port;
1622 unsigned char *data = urb->transfer_buffer;
1623 int length = urb->actual_length;
1624 int port_number;
1625 int function;
1626 int retval;
1627 __u8 lsr;
1628 __u8 msr;
1629 int status = urb->status;
1630
1631 dbg("%s", __func__);
1632
1633 switch (status) {
1634 case 0:
1635 /* success */
1636 break;
1637 case -ECONNRESET:
1638 case -ENOENT:
1639 case -ESHUTDOWN:
1640 /* this urb is terminated, clean up */
1641 dbg("%s - urb shutting down with status: %d",
1642 __func__, status);
1643 return;
1644 default:
1645 dev_err(&urb->dev->dev, "%s - nonzero urb status received: "
1646 "%d\n", __func__, status);
1647 goto exit;
1648 }
1649
1650 if (!length) {
1651 dbg("%s - no data in urb", __func__);
1652 goto exit;
1653 }
1654
1655 usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
1656 __func__, length, data);
1657
1658 if (length != 2) {
1659 dbg("%s - expecting packet of size 2, got %d",
1660 __func__, length);
1661 goto exit;
1662 }
1663
1664 port_number = TIUMP_GET_PORT_FROM_CODE(data[0]);
1665 function = TIUMP_GET_FUNC_FROM_CODE(data[0]);
1666 dbg("%s - port_number %d, function %d, info 0x%x",
1667 __func__, port_number, function, data[1]);
1668 port = edge_serial->serial->port[port_number];
1669 edge_port = usb_get_serial_port_data(port);
1670 if (!edge_port) {
1671 dbg("%s - edge_port not found", __func__);
1672 return;
1673 }
1674 switch (function) {
1675 case TIUMP_INTERRUPT_CODE_LSR:
1676 lsr = map_line_status(data[1]);
1677 if (lsr & UMP_UART_LSR_DATA_MASK) {
1678 /* Save the LSR event for bulk read
1679 completion routine */
1680 dbg("%s - LSR Event Port %u LSR Status = %02x",
1681 __func__, port_number, lsr);
1682 edge_port->lsr_event = 1;
1683 edge_port->lsr_mask = lsr;
1684 } else {
1685 dbg("%s - ===== Port %d LSR Status = %02x ======",
1686 __func__, port_number, lsr);
1687 handle_new_lsr(edge_port, 0, lsr, 0);
1688 }
1689 break;
1690
1691 case TIUMP_INTERRUPT_CODE_MSR: /* MSR */
1692 /* Copy MSR from UMP */
1693 msr = data[1];
1694 dbg("%s - ===== Port %u MSR Status = %02x ======",
1695 __func__, port_number, msr);
1696 handle_new_msr(edge_port, msr);
1697 break;
1698
1699 default:
1700 dev_err(&urb->dev->dev,
1701 "%s - Unknown Interrupt code from UMP %x\n",
1702 __func__, data[1]);
1703 break;
1704
1705 }
1706
1707exit:
1708 retval = usb_submit_urb(urb, GFP_ATOMIC);
1709 if (retval)
1710 dev_err(&urb->dev->dev,
1711 "%s - usb_submit_urb failed with result %d\n",
1712 __func__, retval);
1713}
1714
1715static void edge_bulk_in_callback(struct urb *urb)
1716{
1717 struct edgeport_port *edge_port = urb->context;
1718 unsigned char *data = urb->transfer_buffer;
1719 struct tty_struct *tty;
1720 int retval = 0;
1721 int port_number;
1722 int status = urb->status;
1723
1724 dbg("%s", __func__);
1725
1726 switch (status) {
1727 case 0:
1728 /* success */
1729 break;
1730 case -ECONNRESET:
1731 case -ENOENT:
1732 case -ESHUTDOWN:
1733 /* this urb is terminated, clean up */
1734 dbg("%s - urb shutting down with status: %d",
1735 __func__, status);
1736 return;
1737 default:
1738 dev_err(&urb->dev->dev,
1739 "%s - nonzero read bulk status received: %d\n",
1740 __func__, status);
1741 }
1742
1743 if (status == -EPIPE)
1744 goto exit;
1745
1746 if (status) {
1747 dev_err(&urb->dev->dev, "%s - stopping read!\n", __func__);
1748 return;
1749 }
1750
1751 port_number = edge_port->port->number - edge_port->port->serial->minor;
1752
1753 if (edge_port->lsr_event) {
1754 edge_port->lsr_event = 0;
1755 dbg("%s ===== Port %u LSR Status = %02x, Data = %02x ======",
1756 __func__, port_number, edge_port->lsr_mask, *data);
1757 handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data);
1758 /* Adjust buffer length/pointer */
1759 --urb->actual_length;
1760 ++data;
1761 }
1762
1763 tty = tty_port_tty_get(&edge_port->port->port);
1764 if (tty && urb->actual_length) {
1765 usb_serial_debug_data(debug, &edge_port->port->dev,
1766 __func__, urb->actual_length, data);
1767 if (edge_port->close_pending)
1768 dbg("%s - close pending, dropping data on the floor",
1769 __func__);
1770 else
1771 edge_tty_recv(&edge_port->port->dev, tty, data,
1772 urb->actual_length);
1773 edge_port->icount.rx += urb->actual_length;
1774 }
1775 tty_kref_put(tty);
1776
1777exit:
1778 /* continue read unless stopped */
1779 spin_lock(&edge_port->ep_lock);
1780 if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING) {
1781 urb->dev = edge_port->port->serial->dev;
1782 retval = usb_submit_urb(urb, GFP_ATOMIC);
1783 } else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING) {
1784 edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPED;
1785 }
1786 spin_unlock(&edge_port->ep_lock);
1787 if (retval)
1788 dev_err(&urb->dev->dev,
1789 "%s - usb_submit_urb failed with result %d\n",
1790 __func__, retval);
1791}
1792
1793static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
1794 unsigned char *data, int length)
1795{
1796 int queued;
1797
1798 queued = tty_insert_flip_string(tty, data, length);
1799 if (queued < length)
1800 dev_err(dev, "%s - dropping data, %d bytes lost\n",
1801 __func__, length - queued);
1802 tty_flip_buffer_push(tty);
1803}
1804
1805static void edge_bulk_out_callback(struct urb *urb)
1806{
1807 struct usb_serial_port *port = urb->context;
1808 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1809 int status = urb->status;
1810 struct tty_struct *tty;
1811
1812 dbg("%s - port %d", __func__, port->number);
1813
1814 edge_port->ep_write_urb_in_use = 0;
1815
1816 switch (status) {
1817 case 0:
1818 /* success */
1819 break;
1820 case -ECONNRESET:
1821 case -ENOENT:
1822 case -ESHUTDOWN:
1823 /* this urb is terminated, clean up */
1824 dbg("%s - urb shutting down with status: %d",
1825 __func__, status);
1826 return;
1827 default:
1828 dev_err(&urb->dev->dev, "%s - nonzero write bulk status "
1829 "received: %d\n", __func__, status);
1830 }
1831
1832 /* send any buffered data */
1833 tty = tty_port_tty_get(&port->port);
1834 edge_send(tty);
1835 tty_kref_put(tty);
1836}
1837
1838static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
1839{
1840 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1841 struct edgeport_serial *edge_serial;
1842 struct usb_device *dev;
1843 struct urb *urb;
1844 int port_number;
1845 int status;
1846 u16 open_settings;
1847 u8 transaction_timeout;
1848
1849 dbg("%s - port %d", __func__, port->number);
1850
1851 if (edge_port == NULL)
1852 return -ENODEV;
1853
1854 port_number = port->number - port->serial->minor;
1855 switch (port_number) {
1856 case 0:
1857 edge_port->uart_base = UMPMEM_BASE_UART1;
1858 edge_port->dma_address = UMPD_OEDB1_ADDRESS;
1859 break;
1860 case 1:
1861 edge_port->uart_base = UMPMEM_BASE_UART2;
1862 edge_port->dma_address = UMPD_OEDB2_ADDRESS;
1863 break;
1864 default:
1865 dev_err(&port->dev, "Unknown port number!!!\n");
1866 return -ENODEV;
1867 }
1868
1869 dbg("%s - port_number = %d, uart_base = %04x, dma_address = %04x",
1870 __func__, port_number, edge_port->uart_base,
1871 edge_port->dma_address);
1872
1873 dev = port->serial->dev;
1874
1875 memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
1876 init_waitqueue_head(&edge_port->delta_msr_wait);
1877
1878 /* turn off loopback */
1879 status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
1880 if (status) {
1881 dev_err(&port->dev,
1882 "%s - cannot send clear loopback command, %d\n",
1883 __func__, status);
1884 return status;
1885 }
1886
1887 /* set up the port settings */
1888 if (tty)
1889 edge_set_termios(tty, port, tty->termios);
1890
1891 /* open up the port */
1892
1893 /* milliseconds to timeout for DMA transfer */
1894 transaction_timeout = 2;
1895
1896 edge_port->ump_read_timeout =
1897 max(20, ((transaction_timeout * 3) / 2));
1898
1899 /* milliseconds to timeout for DMA transfer */
1900 open_settings = (u8)(UMP_DMA_MODE_CONTINOUS |
1901 UMP_PIPE_TRANS_TIMEOUT_ENA |
1902 (transaction_timeout << 2));
1903
1904 dbg("%s - Sending UMPC_OPEN_PORT", __func__);
1905
1906 /* Tell TI to open and start the port */
1907 status = send_cmd(dev, UMPC_OPEN_PORT,
1908 (u8)(UMPM_UART1_PORT + port_number), open_settings, NULL, 0);
1909 if (status) {
1910 dev_err(&port->dev, "%s - cannot send open command, %d\n",
1911 __func__, status);
1912 return status;
1913 }
1914
1915 /* Start the DMA? */
1916 status = send_cmd(dev, UMPC_START_PORT,
1917 (u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0);
1918 if (status) {
1919 dev_err(&port->dev, "%s - cannot send start DMA command, %d\n",
1920 __func__, status);
1921 return status;
1922 }
1923
1924 /* Clear TX and RX buffers in UMP */
1925 status = purge_port(port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
1926 if (status) {
1927 dev_err(&port->dev,
1928 "%s - cannot send clear buffers command, %d\n",
1929 __func__, status);
1930 return status;
1931 }
1932
1933 /* Read Initial MSR */
1934 status = ti_vread_sync(dev, UMPC_READ_MSR, 0,
1935 (__u16)(UMPM_UART1_PORT + port_number),
1936 &edge_port->shadow_msr, 1);
1937 if (status) {
1938 dev_err(&port->dev, "%s - cannot send read MSR command, %d\n",
1939 __func__, status);
1940 return status;
1941 }
1942
1943 dbg("ShadowMSR 0x%X", edge_port->shadow_msr);
1944
1945 /* Set Initial MCR */
1946 edge_port->shadow_mcr = MCR_RTS | MCR_DTR;
1947 dbg("ShadowMCR 0x%X", edge_port->shadow_mcr);
1948
1949 edge_serial = edge_port->edge_serial;
1950 if (mutex_lock_interruptible(&edge_serial->es_lock))
1951 return -ERESTARTSYS;
1952 if (edge_serial->num_ports_open == 0) {
1953 /* we are the first port to open, post the interrupt urb */
1954 urb = edge_serial->serial->port[0]->interrupt_in_urb;
1955 if (!urb) {
1956 dev_err(&port->dev,
1957 "%s - no interrupt urb present, exiting\n",
1958 __func__);
1959 status = -EINVAL;
1960 goto release_es_lock;
1961 }
1962 urb->complete = edge_interrupt_callback;
1963 urb->context = edge_serial;
1964 urb->dev = dev;
1965 status = usb_submit_urb(urb, GFP_KERNEL);
1966 if (status) {
1967 dev_err(&port->dev,
1968 "%s - usb_submit_urb failed with value %d\n",
1969 __func__, status);
1970 goto release_es_lock;
1971 }
1972 }
1973
1974 /*
1975 * reset the data toggle on the bulk endpoints to work around bug in
1976 * host controllers where things get out of sync some times
1977 */
1978 usb_clear_halt(dev, port->write_urb->pipe);
1979 usb_clear_halt(dev, port->read_urb->pipe);
1980
1981 /* start up our bulk read urb */
1982 urb = port->read_urb;
1983 if (!urb) {
1984 dev_err(&port->dev, "%s - no read urb present, exiting\n",
1985 __func__);
1986 status = -EINVAL;
1987 goto unlink_int_urb;
1988 }
1989 edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
1990 urb->complete = edge_bulk_in_callback;
1991 urb->context = edge_port;
1992 urb->dev = dev;
1993 status = usb_submit_urb(urb, GFP_KERNEL);
1994 if (status) {
1995 dev_err(&port->dev,
1996 "%s - read bulk usb_submit_urb failed with value %d\n",
1997 __func__, status);
1998 goto unlink_int_urb;
1999 }
2000
2001 ++edge_serial->num_ports_open;
2002
2003 dbg("%s - exited", __func__);
2004
2005 goto release_es_lock;
2006
2007unlink_int_urb:
2008 if (edge_port->edge_serial->num_ports_open == 0)
2009 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
2010release_es_lock:
2011 mutex_unlock(&edge_serial->es_lock);
2012 return status;
2013}
2014
2015static void edge_close(struct usb_serial_port *port)
2016{
2017 struct edgeport_serial *edge_serial;
2018 struct edgeport_port *edge_port;
2019 int port_number;
2020 int status;
2021
2022 dbg("%s - port %d", __func__, port->number);
2023
2024 edge_serial = usb_get_serial_data(port->serial);
2025 edge_port = usb_get_serial_port_data(port);
2026 if (edge_serial == NULL || edge_port == NULL)
2027 return;
2028
2029 /* The bulkreadcompletion routine will check
2030 * this flag and dump add read data */
2031 edge_port->close_pending = 1;
2032
2033 /* chase the port close and flush */
2034 chase_port(edge_port, (HZ * closing_wait) / 100, 1);
2035
2036 usb_kill_urb(port->read_urb);
2037 usb_kill_urb(port->write_urb);
2038 edge_port->ep_write_urb_in_use = 0;
2039
2040 /* assuming we can still talk to the device,
2041 * send a close port command to it */
2042 dbg("%s - send umpc_close_port", __func__);
2043 port_number = port->number - port->serial->minor;
2044 status = send_cmd(port->serial->dev,
2045 UMPC_CLOSE_PORT,
2046 (__u8)(UMPM_UART1_PORT + port_number),
2047 0,
2048 NULL,
2049 0);
2050 mutex_lock(&edge_serial->es_lock);
2051 --edge_port->edge_serial->num_ports_open;
2052 if (edge_port->edge_serial->num_ports_open <= 0) {
2053 /* last port is now closed, let's shut down our interrupt urb */
2054 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
2055 edge_port->edge_serial->num_ports_open = 0;
2056 }
2057 mutex_unlock(&edge_serial->es_lock);
2058 edge_port->close_pending = 0;
2059
2060 dbg("%s - exited", __func__);
2061}
2062
2063static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
2064 const unsigned char *data, int count)
2065{
2066 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2067
2068 dbg("%s - port %d", __func__, port->number);
2069
2070 if (count == 0) {
2071 dbg("%s - write request of 0 bytes", __func__);
2072 return 0;
2073 }
2074
2075 if (edge_port == NULL)
2076 return -ENODEV;
2077 if (edge_port->close_pending == 1)
2078 return -ENODEV;
2079
2080 count = kfifo_in_locked(&edge_port->write_fifo, data, count,
2081 &edge_port->ep_lock);
2082 edge_send(tty);
2083
2084 return count;
2085}
2086
2087static void edge_send(struct tty_struct *tty)
2088{
2089 struct usb_serial_port *port = tty->driver_data;
2090 int count, result;
2091 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2092 unsigned long flags;
2093
2094
2095 dbg("%s - port %d", __func__, port->number);
2096
2097 spin_lock_irqsave(&edge_port->ep_lock, flags);
2098
2099 if (edge_port->ep_write_urb_in_use) {
2100 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2101 return;
2102 }
2103
2104 count = kfifo_out(&edge_port->write_fifo,
2105 port->write_urb->transfer_buffer,
2106 port->bulk_out_size);
2107
2108 if (count == 0) {
2109 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2110 return;
2111 }
2112
2113 edge_port->ep_write_urb_in_use = 1;
2114
2115 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2116
2117 usb_serial_debug_data(debug, &port->dev, __func__, count,
2118 port->write_urb->transfer_buffer);
2119
2120 /* set up our urb */
2121 usb_fill_bulk_urb(port->write_urb, port->serial->dev,
2122 usb_sndbulkpipe(port->serial->dev,
2123 port->bulk_out_endpointAddress),
2124 port->write_urb->transfer_buffer, count,
2125 edge_bulk_out_callback,
2126 port);
2127
2128 /* send the data out the bulk port */
2129 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
2130 if (result) {
2131 dev_err(&port->dev,
2132 "%s - failed submitting write urb, error %d\n",
2133 __func__, result);
2134 edge_port->ep_write_urb_in_use = 0;
2135 /* TODO: reschedule edge_send */
2136 } else
2137 edge_port->icount.tx += count;
2138
2139 /* wakeup any process waiting for writes to complete */
2140 /* there is now more room in the buffer for new writes */
2141 if (tty)
2142 tty_wakeup(tty);
2143}
2144
2145static int edge_write_room(struct tty_struct *tty)
2146{
2147 struct usb_serial_port *port = tty->driver_data;
2148 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2149 int room = 0;
2150 unsigned long flags;
2151
2152 dbg("%s - port %d", __func__, port->number);
2153
2154 if (edge_port == NULL)
2155 return 0;
2156 if (edge_port->close_pending == 1)
2157 return 0;
2158
2159 spin_lock_irqsave(&edge_port->ep_lock, flags);
2160 room = kfifo_avail(&edge_port->write_fifo);
2161 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2162
2163 dbg("%s - returns %d", __func__, room);
2164 return room;
2165}
2166
2167static int edge_chars_in_buffer(struct tty_struct *tty)
2168{
2169 struct usb_serial_port *port = tty->driver_data;
2170 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2171 int chars = 0;
2172 unsigned long flags;
2173
2174 dbg("%s - port %d", __func__, port->number);
2175
2176 if (edge_port == NULL)
2177 return 0;
2178 if (edge_port->close_pending == 1)
2179 return 0;
2180
2181 spin_lock_irqsave(&edge_port->ep_lock, flags);
2182 chars = kfifo_len(&edge_port->write_fifo);
2183 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2184
2185 dbg("%s - returns %d", __func__, chars);
2186 return chars;
2187}
2188
2189static void edge_throttle(struct tty_struct *tty)
2190{
2191 struct usb_serial_port *port = tty->driver_data;
2192 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2193 int status;
2194
2195 dbg("%s - port %d", __func__, port->number);
2196
2197 if (edge_port == NULL)
2198 return;
2199
2200 /* if we are implementing XON/XOFF, send the stop character */
2201 if (I_IXOFF(tty)) {
2202 unsigned char stop_char = STOP_CHAR(tty);
2203 status = edge_write(tty, port, &stop_char, 1);
2204 if (status <= 0) {
2205 dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
2206 }
2207 }
2208
2209 /* if we are implementing RTS/CTS, stop reads */
2210 /* and the Edgeport will clear the RTS line */
2211 if (C_CRTSCTS(tty))
2212 stop_read(edge_port);
2213
2214}
2215
2216static void edge_unthrottle(struct tty_struct *tty)
2217{
2218 struct usb_serial_port *port = tty->driver_data;
2219 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2220 int status;
2221
2222 dbg("%s - port %d", __func__, port->number);
2223
2224 if (edge_port == NULL)
2225 return;
2226
2227 /* if we are implementing XON/XOFF, send the start character */
2228 if (I_IXOFF(tty)) {
2229 unsigned char start_char = START_CHAR(tty);
2230 status = edge_write(tty, port, &start_char, 1);
2231 if (status <= 0) {
2232 dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
2233 }
2234 }
2235 /* if we are implementing RTS/CTS, restart reads */
2236 /* are the Edgeport will assert the RTS line */
2237 if (C_CRTSCTS(tty)) {
2238 status = restart_read(edge_port);
2239 if (status)
2240 dev_err(&port->dev,
2241 "%s - read bulk usb_submit_urb failed: %d\n",
2242 __func__, status);
2243 }
2244
2245}
2246
2247static void stop_read(struct edgeport_port *edge_port)
2248{
2249 unsigned long flags;
2250
2251 spin_lock_irqsave(&edge_port->ep_lock, flags);
2252
2253 if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
2254 edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPING;
2255 edge_port->shadow_mcr &= ~MCR_RTS;
2256
2257 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2258}
2259
2260static int restart_read(struct edgeport_port *edge_port)
2261{
2262 struct urb *urb;
2263 int status = 0;
2264 unsigned long flags;
2265
2266 spin_lock_irqsave(&edge_port->ep_lock, flags);
2267
2268 if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPED) {
2269 urb = edge_port->port->read_urb;
2270 urb->complete = edge_bulk_in_callback;
2271 urb->context = edge_port;
2272 urb->dev = edge_port->port->serial->dev;
2273 status = usb_submit_urb(urb, GFP_ATOMIC);
2274 }
2275 edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
2276 edge_port->shadow_mcr |= MCR_RTS;
2277
2278 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2279
2280 return status;
2281}
2282
2283static void change_port_settings(struct tty_struct *tty,
2284 struct edgeport_port *edge_port, struct ktermios *old_termios)
2285{
2286 struct ump_uart_config *config;
2287 int baud;
2288 unsigned cflag;
2289 int status;
2290 int port_number = edge_port->port->number -
2291 edge_port->port->serial->minor;
2292
2293 dbg("%s - port %d", __func__, edge_port->port->number);
2294
2295 config = kmalloc (sizeof (*config), GFP_KERNEL);
2296 if (!config) {
2297 *tty->termios = *old_termios;
2298 dev_err(&edge_port->port->dev, "%s - out of memory\n",
2299 __func__);
2300 return;
2301 }
2302
2303 cflag = tty->termios->c_cflag;
2304
2305 config->wFlags = 0;
2306
2307 /* These flags must be set */
2308 config->wFlags |= UMP_MASK_UART_FLAGS_RECEIVE_MS_INT;
2309 config->wFlags |= UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR;
2310 config->bUartMode = (__u8)(edge_port->bUartMode);
2311
2312 switch (cflag & CSIZE) {
2313 case CS5:
2314 config->bDataBits = UMP_UART_CHAR5BITS;
2315 dbg("%s - data bits = 5", __func__);
2316 break;
2317 case CS6:
2318 config->bDataBits = UMP_UART_CHAR6BITS;
2319 dbg("%s - data bits = 6", __func__);
2320 break;
2321 case CS7:
2322 config->bDataBits = UMP_UART_CHAR7BITS;
2323 dbg("%s - data bits = 7", __func__);
2324 break;
2325 default:
2326 case CS8:
2327 config->bDataBits = UMP_UART_CHAR8BITS;
2328 dbg("%s - data bits = 8", __func__);
2329 break;
2330 }
2331
2332 if (cflag & PARENB) {
2333 if (cflag & PARODD) {
2334 config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
2335 config->bParity = UMP_UART_ODDPARITY;
2336 dbg("%s - parity = odd", __func__);
2337 } else {
2338 config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
2339 config->bParity = UMP_UART_EVENPARITY;
2340 dbg("%s - parity = even", __func__);
2341 }
2342 } else {
2343 config->bParity = UMP_UART_NOPARITY;
2344 dbg("%s - parity = none", __func__);
2345 }
2346
2347 if (cflag & CSTOPB) {
2348 config->bStopBits = UMP_UART_STOPBIT2;
2349 dbg("%s - stop bits = 2", __func__);
2350 } else {
2351 config->bStopBits = UMP_UART_STOPBIT1;
2352 dbg("%s - stop bits = 1", __func__);
2353 }
2354
2355 /* figure out the flow control settings */
2356 if (cflag & CRTSCTS) {
2357 config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW;
2358 config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW;
2359 dbg("%s - RTS/CTS is enabled", __func__);
2360 } else {
2361 dbg("%s - RTS/CTS is disabled", __func__);
2362 tty->hw_stopped = 0;
2363 restart_read(edge_port);
2364 }
2365
2366 /* if we are implementing XON/XOFF, set the start and stop
2367 character in the device */
2368 config->cXon = START_CHAR(tty);
2369 config->cXoff = STOP_CHAR(tty);
2370
2371 /* if we are implementing INBOUND XON/XOFF */
2372 if (I_IXOFF(tty)) {
2373 config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
2374 dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
2375 __func__, config->cXon, config->cXoff);
2376 } else
2377 dbg("%s - INBOUND XON/XOFF is disabled", __func__);
2378
2379 /* if we are implementing OUTBOUND XON/XOFF */
2380 if (I_IXON(tty)) {
2381 config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
2382 dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
2383 __func__, config->cXon, config->cXoff);
2384 } else
2385 dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
2386
2387 tty->termios->c_cflag &= ~CMSPAR;
2388
2389 /* Round the baud rate */
2390 baud = tty_get_baud_rate(tty);
2391 if (!baud) {
2392 /* pick a default, any default... */
2393 baud = 9600;
2394 } else
2395 tty_encode_baud_rate(tty, baud, baud);
2396
2397 edge_port->baud_rate = baud;
2398 config->wBaudRate = (__u16)((461550L + baud/2) / baud);
2399
2400 /* FIXME: Recompute actual baud from divisor here */
2401
2402 dbg("%s - baud rate = %d, wBaudRate = %d", __func__, baud,
2403 config->wBaudRate);
2404
2405 dbg("wBaudRate: %d", (int)(461550L / config->wBaudRate));
2406 dbg("wFlags: 0x%x", config->wFlags);
2407 dbg("bDataBits: %d", config->bDataBits);
2408 dbg("bParity: %d", config->bParity);
2409 dbg("bStopBits: %d", config->bStopBits);
2410 dbg("cXon: %d", config->cXon);
2411 dbg("cXoff: %d", config->cXoff);
2412 dbg("bUartMode: %d", config->bUartMode);
2413
2414 /* move the word values into big endian mode */
2415 cpu_to_be16s(&config->wFlags);
2416 cpu_to_be16s(&config->wBaudRate);
2417
2418 status = send_cmd(edge_port->port->serial->dev, UMPC_SET_CONFIG,
2419 (__u8)(UMPM_UART1_PORT + port_number),
2420 0, (__u8 *)config, sizeof(*config));
2421 if (status)
2422 dbg("%s - error %d when trying to write config to device",
2423 __func__, status);
2424 kfree(config);
2425}
2426
2427static void edge_set_termios(struct tty_struct *tty,
2428 struct usb_serial_port *port, struct ktermios *old_termios)
2429{
2430 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2431 unsigned int cflag;
2432
2433 cflag = tty->termios->c_cflag;
2434
2435 dbg("%s - clfag %08x iflag %08x", __func__,
2436 tty->termios->c_cflag, tty->termios->c_iflag);
2437 dbg("%s - old clfag %08x old iflag %08x", __func__,
2438 old_termios->c_cflag, old_termios->c_iflag);
2439 dbg("%s - port %d", __func__, port->number);
2440
2441 if (edge_port == NULL)
2442 return;
2443 /* change the port settings to the new ones specified */
2444 change_port_settings(tty, edge_port, old_termios);
2445}
2446
2447static int edge_tiocmset(struct tty_struct *tty,
2448 unsigned int set, unsigned int clear)
2449{
2450 struct usb_serial_port *port = tty->driver_data;
2451 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2452 unsigned int mcr;
2453 unsigned long flags;
2454
2455 dbg("%s - port %d", __func__, port->number);
2456
2457 spin_lock_irqsave(&edge_port->ep_lock, flags);
2458 mcr = edge_port->shadow_mcr;
2459 if (set & TIOCM_RTS)
2460 mcr |= MCR_RTS;
2461 if (set & TIOCM_DTR)
2462 mcr |= MCR_DTR;
2463 if (set & TIOCM_LOOP)
2464 mcr |= MCR_LOOPBACK;
2465
2466 if (clear & TIOCM_RTS)
2467 mcr &= ~MCR_RTS;
2468 if (clear & TIOCM_DTR)
2469 mcr &= ~MCR_DTR;
2470 if (clear & TIOCM_LOOP)
2471 mcr &= ~MCR_LOOPBACK;
2472
2473 edge_port->shadow_mcr = mcr;
2474 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2475
2476 restore_mcr(edge_port, mcr);
2477 return 0;
2478}
2479
2480static int edge_tiocmget(struct tty_struct *tty)
2481{
2482 struct usb_serial_port *port = tty->driver_data;
2483 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2484 unsigned int result = 0;
2485 unsigned int msr;
2486 unsigned int mcr;
2487 unsigned long flags;
2488
2489 dbg("%s - port %d", __func__, port->number);
2490
2491 spin_lock_irqsave(&edge_port->ep_lock, flags);
2492
2493 msr = edge_port->shadow_msr;
2494 mcr = edge_port->shadow_mcr;
2495 result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */
2496 | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */
2497 | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */
2498 | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */
2499 | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */
2500 | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
2501
2502
2503 dbg("%s -- %x", __func__, result);
2504 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2505
2506 return result;
2507}
2508
2509static int edge_get_icount(struct tty_struct *tty,
2510 struct serial_icounter_struct *icount)
2511{
2512 struct usb_serial_port *port = tty->driver_data;
2513 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2514 struct async_icount *ic = &edge_port->icount;
2515
2516 icount->cts = ic->cts;
2517 icount->dsr = ic->dsr;
2518 icount->rng = ic->rng;
2519 icount->dcd = ic->dcd;
2520 icount->tx = ic->tx;
2521 icount->rx = ic->rx;
2522 icount->frame = ic->frame;
2523 icount->parity = ic->parity;
2524 icount->overrun = ic->overrun;
2525 icount->brk = ic->brk;
2526 icount->buf_overrun = ic->buf_overrun;
2527 return 0;
2528}
2529
2530static int get_serial_info(struct edgeport_port *edge_port,
2531 struct serial_struct __user *retinfo)
2532{
2533 struct serial_struct tmp;
2534
2535 if (!retinfo)
2536 return -EFAULT;
2537
2538 memset(&tmp, 0, sizeof(tmp));
2539
2540 tmp.type = PORT_16550A;
2541 tmp.line = edge_port->port->serial->minor;
2542 tmp.port = edge_port->port->number;
2543 tmp.irq = 0;
2544 tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
2545 tmp.xmit_fifo_size = edge_port->port->bulk_out_size;
2546 tmp.baud_base = 9600;
2547 tmp.close_delay = 5*HZ;
2548 tmp.closing_wait = closing_wait;
2549
2550 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
2551 return -EFAULT;
2552 return 0;
2553}
2554
2555static int edge_ioctl(struct tty_struct *tty,
2556 unsigned int cmd, unsigned long arg)
2557{
2558 struct usb_serial_port *port = tty->driver_data;
2559 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2560 struct async_icount cnow;
2561 struct async_icount cprev;
2562
2563 dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
2564
2565 switch (cmd) {
2566 case TIOCGSERIAL:
2567 dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
2568 return get_serial_info(edge_port,
2569 (struct serial_struct __user *) arg);
2570 case TIOCMIWAIT:
2571 dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
2572 cprev = edge_port->icount;
2573 while (1) {
2574 interruptible_sleep_on(&edge_port->delta_msr_wait);
2575 /* see if a signal did it */
2576 if (signal_pending(current))
2577 return -ERESTARTSYS;
2578 cnow = edge_port->icount;
2579 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2580 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
2581 return -EIO; /* no change => error */
2582 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
2583 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
2584 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
2585 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
2586 return 0;
2587 }
2588 cprev = cnow;
2589 }
2590 /* not reached */
2591 break;
2592 }
2593 return -ENOIOCTLCMD;
2594}
2595
2596static void edge_break(struct tty_struct *tty, int break_state)
2597{
2598 struct usb_serial_port *port = tty->driver_data;
2599 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2600 int status;
2601 int bv = 0; /* Off */
2602
2603 dbg("%s - state = %d", __func__, break_state);
2604
2605 /* chase the port close */
2606 chase_port(edge_port, 0, 0);
2607
2608 if (break_state == -1)
2609 bv = 1; /* On */
2610 status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv);
2611 if (status)
2612 dbg("%s - error %d sending break set/clear command.",
2613 __func__, status);
2614}
2615
2616static int edge_startup(struct usb_serial *serial)
2617{
2618 struct edgeport_serial *edge_serial;
2619 struct edgeport_port *edge_port;
2620 struct usb_device *dev;
2621 int status;
2622 int i;
2623
2624 dev = serial->dev;
2625
2626 /* create our private serial structure */
2627 edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
2628 if (edge_serial == NULL) {
2629 dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
2630 return -ENOMEM;
2631 }
2632 mutex_init(&edge_serial->es_lock);
2633 edge_serial->serial = serial;
2634 usb_set_serial_data(serial, edge_serial);
2635
2636 status = download_fw(edge_serial);
2637 if (status) {
2638 kfree(edge_serial);
2639 return status;
2640 }
2641
2642 /* set up our port private structures */
2643 for (i = 0; i < serial->num_ports; ++i) {
2644 edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
2645 if (edge_port == NULL) {
2646 dev_err(&serial->dev->dev, "%s - Out of memory\n",
2647 __func__);
2648 goto cleanup;
2649 }
2650 spin_lock_init(&edge_port->ep_lock);
2651 if (kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
2652 GFP_KERNEL)) {
2653 dev_err(&serial->dev->dev, "%s - Out of memory\n",
2654 __func__);
2655 kfree(edge_port);
2656 goto cleanup;
2657 }
2658 edge_port->port = serial->port[i];
2659 edge_port->edge_serial = edge_serial;
2660 usb_set_serial_port_data(serial->port[i], edge_port);
2661 edge_port->bUartMode = default_uart_mode;
2662 }
2663
2664 return 0;
2665
2666cleanup:
2667 for (--i; i >= 0; --i) {
2668 edge_port = usb_get_serial_port_data(serial->port[i]);
2669 kfifo_free(&edge_port->write_fifo);
2670 kfree(edge_port);
2671 usb_set_serial_port_data(serial->port[i], NULL);
2672 }
2673 kfree(edge_serial);
2674 usb_set_serial_data(serial, NULL);
2675 return -ENOMEM;
2676}
2677
2678static void edge_disconnect(struct usb_serial *serial)
2679{
2680 int i;
2681 struct edgeport_port *edge_port;
2682
2683 dbg("%s", __func__);
2684
2685 for (i = 0; i < serial->num_ports; ++i) {
2686 edge_port = usb_get_serial_port_data(serial->port[i]);
2687 edge_remove_sysfs_attrs(edge_port->port);
2688 }
2689}
2690
2691static void edge_release(struct usb_serial *serial)
2692{
2693 int i;
2694 struct edgeport_port *edge_port;
2695
2696 dbg("%s", __func__);
2697
2698 for (i = 0; i < serial->num_ports; ++i) {
2699 edge_port = usb_get_serial_port_data(serial->port[i]);
2700 kfifo_free(&edge_port->write_fifo);
2701 kfree(edge_port);
2702 }
2703 kfree(usb_get_serial_data(serial));
2704}
2705
2706
2707/* Sysfs Attributes */
2708
2709static ssize_t show_uart_mode(struct device *dev,
2710 struct device_attribute *attr, char *buf)
2711{
2712 struct usb_serial_port *port = to_usb_serial_port(dev);
2713 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2714
2715 return sprintf(buf, "%d\n", edge_port->bUartMode);
2716}
2717
2718static ssize_t store_uart_mode(struct device *dev,
2719 struct device_attribute *attr, const char *valbuf, size_t count)
2720{
2721 struct usb_serial_port *port = to_usb_serial_port(dev);
2722 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2723 unsigned int v = simple_strtoul(valbuf, NULL, 0);
2724
2725 dbg("%s: setting uart_mode = %d", __func__, v);
2726
2727 if (v < 256)
2728 edge_port->bUartMode = v;
2729 else
2730 dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v);
2731
2732 return count;
2733}
2734
2735static DEVICE_ATTR(uart_mode, S_IWUSR | S_IRUGO, show_uart_mode,
2736 store_uart_mode);
2737
2738static int edge_create_sysfs_attrs(struct usb_serial_port *port)
2739{
2740 return device_create_file(&port->dev, &dev_attr_uart_mode);
2741}
2742
2743static int edge_remove_sysfs_attrs(struct usb_serial_port *port)
2744{
2745 device_remove_file(&port->dev, &dev_attr_uart_mode);
2746 return 0;
2747}
2748
2749
2750static struct usb_serial_driver edgeport_1port_device = {
2751 .driver = {
2752 .owner = THIS_MODULE,
2753 .name = "edgeport_ti_1",
2754 },
2755 .description = "Edgeport TI 1 port adapter",
2756 .usb_driver = &io_driver,
2757 .id_table = edgeport_1port_id_table,
2758 .num_ports = 1,
2759 .open = edge_open,
2760 .close = edge_close,
2761 .throttle = edge_throttle,
2762 .unthrottle = edge_unthrottle,
2763 .attach = edge_startup,
2764 .disconnect = edge_disconnect,
2765 .release = edge_release,
2766 .port_probe = edge_create_sysfs_attrs,
2767 .ioctl = edge_ioctl,
2768 .set_termios = edge_set_termios,
2769 .tiocmget = edge_tiocmget,
2770 .tiocmset = edge_tiocmset,
2771 .get_icount = edge_get_icount,
2772 .write = edge_write,
2773 .write_room = edge_write_room,
2774 .chars_in_buffer = edge_chars_in_buffer,
2775 .break_ctl = edge_break,
2776 .read_int_callback = edge_interrupt_callback,
2777 .read_bulk_callback = edge_bulk_in_callback,
2778 .write_bulk_callback = edge_bulk_out_callback,
2779};
2780
2781static struct usb_serial_driver edgeport_2port_device = {
2782 .driver = {
2783 .owner = THIS_MODULE,
2784 .name = "edgeport_ti_2",
2785 },
2786 .description = "Edgeport TI 2 port adapter",
2787 .usb_driver = &io_driver,
2788 .id_table = edgeport_2port_id_table,
2789 .num_ports = 2,
2790 .open = edge_open,
2791 .close = edge_close,
2792 .throttle = edge_throttle,
2793 .unthrottle = edge_unthrottle,
2794 .attach = edge_startup,
2795 .disconnect = edge_disconnect,
2796 .release = edge_release,
2797 .port_probe = edge_create_sysfs_attrs,
2798 .ioctl = edge_ioctl,
2799 .set_termios = edge_set_termios,
2800 .tiocmget = edge_tiocmget,
2801 .tiocmset = edge_tiocmset,
2802 .write = edge_write,
2803 .write_room = edge_write_room,
2804 .chars_in_buffer = edge_chars_in_buffer,
2805 .break_ctl = edge_break,
2806 .read_int_callback = edge_interrupt_callback,
2807 .read_bulk_callback = edge_bulk_in_callback,
2808 .write_bulk_callback = edge_bulk_out_callback,
2809};
2810
2811
2812static int __init edgeport_init(void)
2813{
2814 int retval;
2815 retval = usb_serial_register(&edgeport_1port_device);
2816 if (retval)
2817 goto failed_1port_device_register;
2818 retval = usb_serial_register(&edgeport_2port_device);
2819 if (retval)
2820 goto failed_2port_device_register;
2821 retval = usb_register(&io_driver);
2822 if (retval)
2823 goto failed_usb_register;
2824 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
2825 DRIVER_DESC "\n");
2826 return 0;
2827failed_usb_register:
2828 usb_serial_deregister(&edgeport_2port_device);
2829failed_2port_device_register:
2830 usb_serial_deregister(&edgeport_1port_device);
2831failed_1port_device_register:
2832 return retval;
2833}
2834
2835static void __exit edgeport_exit(void)
2836{
2837 usb_deregister(&io_driver);
2838 usb_serial_deregister(&edgeport_1port_device);
2839 usb_serial_deregister(&edgeport_2port_device);
2840}
2841
2842module_init(edgeport_init);
2843module_exit(edgeport_exit);
2844
2845/* Module information */
2846MODULE_AUTHOR(DRIVER_AUTHOR);
2847MODULE_DESCRIPTION(DRIVER_DESC);
2848MODULE_LICENSE("GPL");
2849MODULE_FIRMWARE("edgeport/down3.bin");
2850
2851module_param(debug, bool, S_IRUGO | S_IWUSR);
2852MODULE_PARM_DESC(debug, "Debug enabled or not");
2853
2854module_param(closing_wait, int, S_IRUGO | S_IWUSR);
2855MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
2856
2857module_param(ignore_cpu_rev, bool, S_IRUGO | S_IWUSR);
2858MODULE_PARM_DESC(ignore_cpu_rev,
2859 "Ignore the cpu revision when connecting to a device");
2860
2861module_param(default_uart_mode, int, S_IRUGO | S_IWUSR);
2862MODULE_PARM_DESC(default_uart_mode, "Default uart_mode, 0=RS232, ...");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Edgeport USB Serial Converter driver
4 *
5 * Copyright (C) 2000-2002 Inside Out Networks, All rights reserved.
6 * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
7 *
8 * Supports the following devices:
9 * EP/1 EP/2 EP/4 EP/21 EP/22 EP/221 EP/42 EP/421 WATCHPORT
10 *
11 * For questions or problems with this driver, contact Inside Out
12 * Networks technical support, or Peter Berger <pberger@brimson.com>,
13 * or Al Borchers <alborchers@steinerpoint.com>.
14 */
15
16#include <linux/kernel.h>
17#include <linux/jiffies.h>
18#include <linux/errno.h>
19#include <linux/slab.h>
20#include <linux/tty.h>
21#include <linux/tty_driver.h>
22#include <linux/tty_flip.h>
23#include <linux/module.h>
24#include <linux/spinlock.h>
25#include <linux/mutex.h>
26#include <linux/serial.h>
27#include <linux/swab.h>
28#include <linux/kfifo.h>
29#include <linux/ioctl.h>
30#include <linux/firmware.h>
31#include <linux/uaccess.h>
32#include <linux/usb.h>
33#include <linux/usb/serial.h>
34
35#include "io_16654.h"
36#include "io_usbvend.h"
37#include "io_ti.h"
38
39#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
40#define DRIVER_DESC "Edgeport USB Serial Driver"
41
42#define EPROM_PAGE_SIZE 64
43
44
45/* different hardware types */
46#define HARDWARE_TYPE_930 0
47#define HARDWARE_TYPE_TIUMP 1
48
49/* IOCTL_PRIVATE_TI_GET_MODE Definitions */
50#define TI_MODE_CONFIGURING 0 /* Device has not entered start device */
51#define TI_MODE_BOOT 1 /* Staying in boot mode */
52#define TI_MODE_DOWNLOAD 2 /* Made it to download mode */
53#define TI_MODE_TRANSITIONING 3 /*
54 * Currently in boot mode but
55 * transitioning to download mode
56 */
57
58/* read urb state */
59#define EDGE_READ_URB_RUNNING 0
60#define EDGE_READ_URB_STOPPING 1
61#define EDGE_READ_URB_STOPPED 2
62
63
64/* Product information read from the Edgeport */
65struct product_info {
66 int TiMode; /* Current TI Mode */
67 u8 hardware_type; /* Type of hardware */
68} __packed;
69
70/*
71 * Edgeport firmware header
72 *
73 * "build_number" has been set to 0 in all three of the images I have
74 * seen, and Digi Tech Support suggests that it is safe to ignore it.
75 *
76 * "length" is the number of bytes of actual data following the header.
77 *
78 * "checksum" is the low order byte resulting from adding the values of
79 * all the data bytes.
80 */
81struct edgeport_fw_hdr {
82 u8 major_version;
83 u8 minor_version;
84 __le16 build_number;
85 __le16 length;
86 u8 checksum;
87} __packed;
88
89struct edgeport_port {
90 u16 uart_base;
91 u16 dma_address;
92 u8 shadow_msr;
93 u8 shadow_mcr;
94 u8 shadow_lsr;
95 u8 lsr_mask;
96 u32 ump_read_timeout; /*
97 * Number of milliseconds the UMP will
98 * wait without data before completing
99 * a read short
100 */
101 int baud_rate;
102 int close_pending;
103 int lsr_event;
104
105 struct edgeport_serial *edge_serial;
106 struct usb_serial_port *port;
107 u8 bUartMode; /* Port type, 0: RS232, etc. */
108 spinlock_t ep_lock;
109 int ep_read_urb_state;
110 int ep_write_urb_in_use;
111};
112
113struct edgeport_serial {
114 struct product_info product_info;
115 u8 TI_I2C_Type; /* Type of I2C in UMP */
116 u8 TiReadI2C; /*
117 * Set to TRUE if we have read the
118 * I2c in Boot Mode
119 */
120 struct mutex es_lock;
121 int num_ports_open;
122 struct usb_serial *serial;
123 struct delayed_work heartbeat_work;
124 int fw_version;
125 bool use_heartbeat;
126};
127
128
129/* Devices that this driver supports */
130static const struct usb_device_id edgeport_1port_id_table[] = {
131 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
132 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
133 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
134 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
135 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
136 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
137 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
138 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
139 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
140 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
141 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
142 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
143 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
144 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
145 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
146 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
147 { }
148};
149
150static const struct usb_device_id edgeport_2port_id_table[] = {
151 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
152 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
153 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
154 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
155 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
156 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
157 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
158 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
159 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
160 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
161 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
162 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
163 /* The 4, 8 and 16 port devices show up as multiple 2 port devices */
164 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
165 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
166 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
167 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
168 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
169 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_E5805A) },
170 { }
171};
172
173/* Devices that this driver supports */
174static const struct usb_device_id id_table_combined[] = {
175 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
176 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
177 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
178 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
179 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
180 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
181 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
182 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
183 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
184 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
185 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
186 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
187 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
188 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
189 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
190 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
191 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
192 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
193 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
194 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
195 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
196 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
197 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
198 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
199 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
200 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
201 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
202 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
203 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
204 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
205 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
206 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
207 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
208 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_E5805A) },
209 { }
210};
211
212MODULE_DEVICE_TABLE(usb, id_table_combined);
213
214static bool ignore_cpu_rev;
215static int default_uart_mode; /* RS232 */
216
217static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
218 int length);
219
220static void stop_read(struct edgeport_port *edge_port);
221static int restart_read(struct edgeport_port *edge_port);
222
223static void edge_set_termios(struct tty_struct *tty,
224 struct usb_serial_port *port,
225 const struct ktermios *old_termios);
226static void edge_send(struct usb_serial_port *port, struct tty_struct *tty);
227
228static int do_download_mode(struct edgeport_serial *serial,
229 const struct firmware *fw);
230static int do_boot_mode(struct edgeport_serial *serial,
231 const struct firmware *fw);
232
233/* sysfs attributes */
234static int edge_create_sysfs_attrs(struct usb_serial_port *port);
235static int edge_remove_sysfs_attrs(struct usb_serial_port *port);
236
237/*
238 * Some release of Edgeport firmware "down3.bin" after version 4.80
239 * introduced code to automatically disconnect idle devices on some
240 * Edgeport models after periods of inactivity, typically ~60 seconds.
241 * This occurs without regard to whether ports on the device are open
242 * or not. Digi International Tech Support suggested:
243 *
244 * 1. Adding driver "heartbeat" code to reset the firmware timer by
245 * requesting a descriptor record every 15 seconds, which should be
246 * effective with newer firmware versions that require it, and benign
247 * with older versions that do not. In practice 40 seconds seems often
248 * enough.
249 * 2. The heartbeat code is currently required only on Edgeport/416 models.
250 */
251#define FW_HEARTBEAT_VERSION_CUTOFF ((4 << 8) + 80)
252#define FW_HEARTBEAT_SECS 40
253
254/* Timeouts in msecs: firmware downloads take longer */
255#define TI_VSEND_TIMEOUT_DEFAULT 1000
256#define TI_VSEND_TIMEOUT_FW_DOWNLOAD 10000
257
258static int ti_vread_sync(struct usb_device *dev, u8 request, u16 value,
259 u16 index, void *data, int size)
260{
261 int status;
262
263 status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
264 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
265 value, index, data, size, 1000);
266 if (status < 0)
267 return status;
268 if (status != size) {
269 dev_dbg(&dev->dev, "%s - wanted to read %d, but only read %d\n",
270 __func__, size, status);
271 return -ECOMM;
272 }
273 return 0;
274}
275
276static int ti_vsend_sync(struct usb_device *dev, u8 request, u16 value,
277 u16 index, void *data, int size, int timeout)
278{
279 int status;
280
281 status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
282 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
283 value, index, data, size, timeout);
284 if (status < 0)
285 return status;
286
287 return 0;
288}
289
290static int read_port_cmd(struct usb_serial_port *port, u8 command, u16 value,
291 void *data, int size)
292{
293 return ti_vread_sync(port->serial->dev, command, value,
294 UMPM_UART1_PORT + port->port_number,
295 data, size);
296}
297
298static int send_port_cmd(struct usb_serial_port *port, u8 command, u16 value,
299 void *data, int size)
300{
301 return ti_vsend_sync(port->serial->dev, command, value,
302 UMPM_UART1_PORT + port->port_number,
303 data, size, TI_VSEND_TIMEOUT_DEFAULT);
304}
305
306/* clear tx/rx buffers and fifo in TI UMP */
307static int purge_port(struct usb_serial_port *port, u16 mask)
308{
309 int port_number = port->port_number;
310
311 dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask);
312
313 return send_port_cmd(port, UMPC_PURGE_PORT, mask, NULL, 0);
314}
315
316/**
317 * read_download_mem - Read edgeport memory from TI chip
318 * @dev: usb device pointer
319 * @start_address: Device CPU address at which to read
320 * @length: Length of above data
321 * @address_type: Can read both XDATA and I2C
322 * @buffer: pointer to input data buffer
323 */
324static int read_download_mem(struct usb_device *dev, int start_address,
325 int length, u8 address_type, u8 *buffer)
326{
327 int status = 0;
328 u8 read_length;
329 u16 be_start_address;
330
331 dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length);
332
333 /*
334 * Read in blocks of 64 bytes
335 * (TI firmware can't handle more than 64 byte reads)
336 */
337 while (length) {
338 if (length > 64)
339 read_length = 64;
340 else
341 read_length = (u8)length;
342
343 if (read_length > 1) {
344 dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length);
345 }
346 /*
347 * NOTE: Must use swab as wIndex is sent in little-endian
348 * byte order regardless of host byte order.
349 */
350 be_start_address = swab16((u16)start_address);
351 status = ti_vread_sync(dev, UMPC_MEMORY_READ,
352 (u16)address_type,
353 be_start_address,
354 buffer, read_length);
355
356 if (status) {
357 dev_dbg(&dev->dev, "%s - ERROR %x\n", __func__, status);
358 return status;
359 }
360
361 if (read_length > 1)
362 usb_serial_debug_data(&dev->dev, __func__, read_length, buffer);
363
364 /* Update pointers/length */
365 start_address += read_length;
366 buffer += read_length;
367 length -= read_length;
368 }
369
370 return status;
371}
372
373static int read_ram(struct usb_device *dev, int start_address,
374 int length, u8 *buffer)
375{
376 return read_download_mem(dev, start_address, length,
377 DTK_ADDR_SPACE_XDATA, buffer);
378}
379
380/* Read edgeport memory to a given block */
381static int read_boot_mem(struct edgeport_serial *serial,
382 int start_address, int length, u8 *buffer)
383{
384 int status = 0;
385 int i;
386
387 for (i = 0; i < length; i++) {
388 status = ti_vread_sync(serial->serial->dev,
389 UMPC_MEMORY_READ, serial->TI_I2C_Type,
390 (u16)(start_address+i), &buffer[i], 0x01);
391 if (status) {
392 dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status);
393 return status;
394 }
395 }
396
397 dev_dbg(&serial->serial->dev->dev, "%s - start_address = %x, length = %d\n",
398 __func__, start_address, length);
399 usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer);
400
401 serial->TiReadI2C = 1;
402
403 return status;
404}
405
406/* Write given block to TI EPROM memory */
407static int write_boot_mem(struct edgeport_serial *serial,
408 int start_address, int length, u8 *buffer)
409{
410 int status = 0;
411 int i;
412 u8 *temp;
413
414 /* Must do a read before write */
415 if (!serial->TiReadI2C) {
416 temp = kmalloc(1, GFP_KERNEL);
417 if (!temp)
418 return -ENOMEM;
419
420 status = read_boot_mem(serial, 0, 1, temp);
421 kfree(temp);
422 if (status)
423 return status;
424 }
425
426 for (i = 0; i < length; ++i) {
427 status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
428 buffer[i], (u16)(i + start_address), NULL,
429 0, TI_VSEND_TIMEOUT_DEFAULT);
430 if (status)
431 return status;
432 }
433
434 dev_dbg(&serial->serial->dev->dev, "%s - start_sddr = %x, length = %d\n", __func__, start_address, length);
435 usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer);
436
437 return status;
438}
439
440/* Write edgeport I2C memory to TI chip */
441static int write_i2c_mem(struct edgeport_serial *serial,
442 int start_address, int length, u8 address_type, u8 *buffer)
443{
444 struct device *dev = &serial->serial->dev->dev;
445 int status = 0;
446 int write_length;
447 u16 be_start_address;
448
449 /* We can only send a maximum of 1 aligned byte page at a time */
450
451 /* calculate the number of bytes left in the first page */
452 write_length = EPROM_PAGE_SIZE -
453 (start_address & (EPROM_PAGE_SIZE - 1));
454
455 if (write_length > length)
456 write_length = length;
457
458 dev_dbg(dev, "%s - BytesInFirstPage Addr = %x, length = %d\n",
459 __func__, start_address, write_length);
460 usb_serial_debug_data(dev, __func__, write_length, buffer);
461
462 /*
463 * Write first page.
464 *
465 * NOTE: Must use swab as wIndex is sent in little-endian byte order
466 * regardless of host byte order.
467 */
468 be_start_address = swab16((u16)start_address);
469 status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
470 (u16)address_type, be_start_address,
471 buffer, write_length, TI_VSEND_TIMEOUT_DEFAULT);
472 if (status) {
473 dev_dbg(dev, "%s - ERROR %d\n", __func__, status);
474 return status;
475 }
476
477 length -= write_length;
478 start_address += write_length;
479 buffer += write_length;
480
481 /*
482 * We should be aligned now -- can write max page size bytes at a
483 * time.
484 */
485 while (length) {
486 if (length > EPROM_PAGE_SIZE)
487 write_length = EPROM_PAGE_SIZE;
488 else
489 write_length = length;
490
491 dev_dbg(dev, "%s - Page Write Addr = %x, length = %d\n",
492 __func__, start_address, write_length);
493 usb_serial_debug_data(dev, __func__, write_length, buffer);
494
495 /*
496 * Write next page.
497 *
498 * NOTE: Must use swab as wIndex is sent in little-endian byte
499 * order regardless of host byte order.
500 */
501 be_start_address = swab16((u16)start_address);
502 status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
503 (u16)address_type, be_start_address, buffer,
504 write_length, TI_VSEND_TIMEOUT_DEFAULT);
505 if (status) {
506 dev_err(dev, "%s - ERROR %d\n", __func__, status);
507 return status;
508 }
509
510 length -= write_length;
511 start_address += write_length;
512 buffer += write_length;
513 }
514 return status;
515}
516
517/*
518 * Examine the UMP DMA registers and LSR
519 *
520 * Check the MSBit of the X and Y DMA byte count registers.
521 * A zero in this bit indicates that the TX DMA buffers are empty
522 * then check the TX Empty bit in the UART.
523 */
524static int tx_active(struct edgeport_port *port)
525{
526 int status;
527 struct out_endpoint_desc_block *oedb;
528 u8 *lsr;
529 int bytes_left = 0;
530
531 oedb = kmalloc(sizeof(*oedb), GFP_KERNEL);
532 if (!oedb)
533 return -ENOMEM;
534
535 /*
536 * Sigh, that's right, just one byte, as not all platforms can
537 * do DMA from stack
538 */
539 lsr = kmalloc(1, GFP_KERNEL);
540 if (!lsr) {
541 kfree(oedb);
542 return -ENOMEM;
543 }
544 /* Read the DMA Count Registers */
545 status = read_ram(port->port->serial->dev, port->dma_address,
546 sizeof(*oedb), (void *)oedb);
547 if (status)
548 goto exit_is_tx_active;
549
550 dev_dbg(&port->port->dev, "%s - XByteCount 0x%X\n", __func__, oedb->XByteCount);
551
552 /* and the LSR */
553 status = read_ram(port->port->serial->dev,
554 port->uart_base + UMPMEM_OFFS_UART_LSR, 1, lsr);
555
556 if (status)
557 goto exit_is_tx_active;
558 dev_dbg(&port->port->dev, "%s - LSR = 0x%X\n", __func__, *lsr);
559
560 /* If either buffer has data or we are transmitting then return TRUE */
561 if ((oedb->XByteCount & 0x80) != 0)
562 bytes_left += 64;
563
564 if ((*lsr & UMP_UART_LSR_TX_MASK) == 0)
565 bytes_left += 1;
566
567 /* We return Not Active if we get any kind of error */
568exit_is_tx_active:
569 dev_dbg(&port->port->dev, "%s - return %d\n", __func__, bytes_left);
570
571 kfree(lsr);
572 kfree(oedb);
573 return bytes_left;
574}
575
576static int choose_config(struct usb_device *dev)
577{
578 /*
579 * There may be multiple configurations on this device, in which case
580 * we would need to read and parse all of them to find out which one
581 * we want. However, we just support one config at this point,
582 * configuration # 1, which is Config Descriptor 0.
583 */
584
585 dev_dbg(&dev->dev, "%s - Number of Interfaces = %d\n",
586 __func__, dev->config->desc.bNumInterfaces);
587 dev_dbg(&dev->dev, "%s - MAX Power = %d\n",
588 __func__, dev->config->desc.bMaxPower * 2);
589
590 if (dev->config->desc.bNumInterfaces != 1) {
591 dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__);
592 return -ENODEV;
593 }
594
595 return 0;
596}
597
598static int read_rom(struct edgeport_serial *serial,
599 int start_address, int length, u8 *buffer)
600{
601 int status;
602
603 if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
604 status = read_download_mem(serial->serial->dev,
605 start_address,
606 length,
607 serial->TI_I2C_Type,
608 buffer);
609 } else {
610 status = read_boot_mem(serial, start_address, length,
611 buffer);
612 }
613 return status;
614}
615
616static int write_rom(struct edgeport_serial *serial, int start_address,
617 int length, u8 *buffer)
618{
619 if (serial->product_info.TiMode == TI_MODE_BOOT)
620 return write_boot_mem(serial, start_address, length,
621 buffer);
622
623 if (serial->product_info.TiMode == TI_MODE_DOWNLOAD)
624 return write_i2c_mem(serial, start_address, length,
625 serial->TI_I2C_Type, buffer);
626 return -EINVAL;
627}
628
629/* Read a descriptor header from I2C based on type */
630static int get_descriptor_addr(struct edgeport_serial *serial,
631 int desc_type, struct ti_i2c_desc *rom_desc)
632{
633 int start_address;
634 int status;
635
636 /* Search for requested descriptor in I2C */
637 start_address = 2;
638 do {
639 status = read_rom(serial,
640 start_address,
641 sizeof(struct ti_i2c_desc),
642 (u8 *)rom_desc);
643 if (status)
644 return 0;
645
646 if (rom_desc->Type == desc_type)
647 return start_address;
648
649 start_address = start_address + sizeof(struct ti_i2c_desc) +
650 le16_to_cpu(rom_desc->Size);
651
652 } while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
653
654 return 0;
655}
656
657/* Validate descriptor checksum */
658static int valid_csum(struct ti_i2c_desc *rom_desc, u8 *buffer)
659{
660 u16 i;
661 u8 cs = 0;
662
663 for (i = 0; i < le16_to_cpu(rom_desc->Size); i++)
664 cs = (u8)(cs + buffer[i]);
665
666 if (cs != rom_desc->CheckSum) {
667 pr_debug("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
668 return -EINVAL;
669 }
670 return 0;
671}
672
673/* Make sure that the I2C image is good */
674static int check_i2c_image(struct edgeport_serial *serial)
675{
676 struct device *dev = &serial->serial->dev->dev;
677 int status = 0;
678 struct ti_i2c_desc *rom_desc;
679 int start_address = 2;
680 u8 *buffer;
681 u16 ttype;
682
683 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
684 if (!rom_desc)
685 return -ENOMEM;
686
687 buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL);
688 if (!buffer) {
689 kfree(rom_desc);
690 return -ENOMEM;
691 }
692
693 /* Read the first byte (Signature0) must be 0x52 or 0x10 */
694 status = read_rom(serial, 0, 1, buffer);
695 if (status)
696 goto out;
697
698 if (*buffer != UMP5152 && *buffer != UMP3410) {
699 dev_err(dev, "%s - invalid buffer signature\n", __func__);
700 status = -ENODEV;
701 goto out;
702 }
703
704 do {
705 /* Validate the I2C */
706 status = read_rom(serial,
707 start_address,
708 sizeof(struct ti_i2c_desc),
709 (u8 *)rom_desc);
710 if (status)
711 break;
712
713 if ((start_address + sizeof(struct ti_i2c_desc) +
714 le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) {
715 status = -ENODEV;
716 dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__);
717 break;
718 }
719
720 dev_dbg(dev, "%s Type = 0x%x\n", __func__, rom_desc->Type);
721
722 /* Skip type 2 record */
723 ttype = rom_desc->Type & 0x0f;
724 if (ttype != I2C_DESC_TYPE_FIRMWARE_BASIC
725 && ttype != I2C_DESC_TYPE_FIRMWARE_AUTO) {
726 /* Read the descriptor data */
727 status = read_rom(serial, start_address +
728 sizeof(struct ti_i2c_desc),
729 le16_to_cpu(rom_desc->Size),
730 buffer);
731 if (status)
732 break;
733
734 status = valid_csum(rom_desc, buffer);
735 if (status)
736 break;
737 }
738 start_address = start_address + sizeof(struct ti_i2c_desc) +
739 le16_to_cpu(rom_desc->Size);
740
741 } while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
742 (start_address < TI_MAX_I2C_SIZE));
743
744 if ((rom_desc->Type != I2C_DESC_TYPE_ION) ||
745 (start_address > TI_MAX_I2C_SIZE))
746 status = -ENODEV;
747
748out:
749 kfree(buffer);
750 kfree(rom_desc);
751 return status;
752}
753
754static int get_manuf_info(struct edgeport_serial *serial, u8 *buffer)
755{
756 int status;
757 int start_address;
758 struct ti_i2c_desc *rom_desc;
759 struct edge_ti_manuf_descriptor *desc;
760 struct device *dev = &serial->serial->dev->dev;
761
762 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
763 if (!rom_desc)
764 return -ENOMEM;
765
766 start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
767 rom_desc);
768
769 if (!start_address) {
770 dev_dbg(dev, "%s - Edge Descriptor not found in I2C\n", __func__);
771 status = -ENODEV;
772 goto exit;
773 }
774
775 /* Read the descriptor data */
776 status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
777 le16_to_cpu(rom_desc->Size), buffer);
778 if (status)
779 goto exit;
780
781 status = valid_csum(rom_desc, buffer);
782
783 desc = (struct edge_ti_manuf_descriptor *)buffer;
784 dev_dbg(dev, "%s - IonConfig 0x%x\n", __func__, desc->IonConfig);
785 dev_dbg(dev, "%s - Version %d\n", __func__, desc->Version);
786 dev_dbg(dev, "%s - Cpu/Board 0x%x\n", __func__, desc->CpuRev_BoardRev);
787 dev_dbg(dev, "%s - NumPorts %d\n", __func__, desc->NumPorts);
788 dev_dbg(dev, "%s - NumVirtualPorts %d\n", __func__, desc->NumVirtualPorts);
789 dev_dbg(dev, "%s - TotalPorts %d\n", __func__, desc->TotalPorts);
790
791exit:
792 kfree(rom_desc);
793 return status;
794}
795
796/* Build firmware header used for firmware update */
797static int build_i2c_fw_hdr(u8 *header, const struct firmware *fw)
798{
799 u8 *buffer;
800 int buffer_size;
801 int i;
802 u8 cs = 0;
803 struct ti_i2c_desc *i2c_header;
804 struct ti_i2c_image_header *img_header;
805 struct ti_i2c_firmware_rec *firmware_rec;
806 struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
807
808 /*
809 * In order to update the I2C firmware we must change the type 2 record
810 * to type 0xF2. This will force the UMP to come up in Boot Mode.
811 * Then while in boot mode, the driver will download the latest
812 * firmware (padded to 15.5k) into the UMP ram. And finally when the
813 * device comes back up in download mode the driver will cause the new
814 * firmware to be copied from the UMP Ram to I2C and the firmware will
815 * update the record type from 0xf2 to 0x02.
816 */
817
818 /*
819 * Allocate a 15.5k buffer + 2 bytes for version number (Firmware
820 * Record)
821 */
822 buffer_size = (((1024 * 16) - 512 ) +
823 sizeof(struct ti_i2c_firmware_rec));
824
825 buffer = kmalloc(buffer_size, GFP_KERNEL);
826 if (!buffer)
827 return -ENOMEM;
828
829 /* Set entire image of 0xffs */
830 memset(buffer, 0xff, buffer_size);
831
832 /* Copy version number into firmware record */
833 firmware_rec = (struct ti_i2c_firmware_rec *)buffer;
834
835 firmware_rec->Ver_Major = fw_hdr->major_version;
836 firmware_rec->Ver_Minor = fw_hdr->minor_version;
837
838 /* Pointer to fw_down memory image */
839 img_header = (struct ti_i2c_image_header *)&fw->data[4];
840
841 memcpy(buffer + sizeof(struct ti_i2c_firmware_rec),
842 &fw->data[4 + sizeof(struct ti_i2c_image_header)],
843 le16_to_cpu(img_header->Length));
844
845 for (i=0; i < buffer_size; i++) {
846 cs = (u8)(cs + buffer[i]);
847 }
848
849 kfree(buffer);
850
851 /* Build new header */
852 i2c_header = (struct ti_i2c_desc *)header;
853 firmware_rec = (struct ti_i2c_firmware_rec*)i2c_header->Data;
854
855 i2c_header->Type = I2C_DESC_TYPE_FIRMWARE_BLANK;
856 i2c_header->Size = cpu_to_le16(buffer_size);
857 i2c_header->CheckSum = cs;
858 firmware_rec->Ver_Major = fw_hdr->major_version;
859 firmware_rec->Ver_Minor = fw_hdr->minor_version;
860
861 return 0;
862}
863
864/* Try to figure out what type of I2c we have */
865static int i2c_type_bootmode(struct edgeport_serial *serial)
866{
867 struct device *dev = &serial->serial->dev->dev;
868 int status;
869 u8 *data;
870
871 data = kmalloc(1, GFP_KERNEL);
872 if (!data)
873 return -ENOMEM;
874
875 /* Try to read type 2 */
876 status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
877 DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01);
878 if (status)
879 dev_dbg(dev, "%s - read 2 status error = %d\n", __func__, status);
880 else
881 dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data);
882 if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
883 dev_dbg(dev, "%s - ROM_TYPE_II\n", __func__);
884 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
885 goto out;
886 }
887
888 /* Try to read type 3 */
889 status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
890 DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01);
891 if (status)
892 dev_dbg(dev, "%s - read 3 status error = %d\n", __func__, status);
893 else
894 dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data);
895 if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
896 dev_dbg(dev, "%s - ROM_TYPE_III\n", __func__);
897 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
898 goto out;
899 }
900
901 dev_dbg(dev, "%s - Unknown\n", __func__);
902 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
903 status = -ENODEV;
904out:
905 kfree(data);
906 return status;
907}
908
909static int bulk_xfer(struct usb_serial *serial, void *buffer,
910 int length, int *num_sent)
911{
912 int status;
913
914 status = usb_bulk_msg(serial->dev,
915 usb_sndbulkpipe(serial->dev,
916 serial->port[0]->bulk_out_endpointAddress),
917 buffer, length, num_sent, 1000);
918 return status;
919}
920
921/* Download given firmware image to the device (IN BOOT MODE) */
922static int download_code(struct edgeport_serial *serial, u8 *image,
923 int image_length)
924{
925 int status = 0;
926 int pos;
927 int transfer;
928 int done;
929
930 /* Transfer firmware image */
931 for (pos = 0; pos < image_length; ) {
932 /* Read the next buffer from file */
933 transfer = image_length - pos;
934 if (transfer > EDGE_FW_BULK_MAX_PACKET_SIZE)
935 transfer = EDGE_FW_BULK_MAX_PACKET_SIZE;
936
937 /* Transfer data */
938 status = bulk_xfer(serial->serial, &image[pos],
939 transfer, &done);
940 if (status)
941 break;
942 /* Advance buffer pointer */
943 pos += done;
944 }
945
946 return status;
947}
948
949/* FIXME!!! */
950static int config_boot_dev(struct usb_device *dev)
951{
952 return 0;
953}
954
955static int ti_cpu_rev(struct edge_ti_manuf_descriptor *desc)
956{
957 return TI_GET_CPU_REVISION(desc->CpuRev_BoardRev);
958}
959
960static int check_fw_sanity(struct edgeport_serial *serial,
961 const struct firmware *fw)
962{
963 u16 length_total;
964 u8 checksum = 0;
965 int pos;
966 struct device *dev = &serial->serial->interface->dev;
967 struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
968
969 if (fw->size < sizeof(struct edgeport_fw_hdr)) {
970 dev_err(dev, "incomplete fw header\n");
971 return -EINVAL;
972 }
973
974 length_total = le16_to_cpu(fw_hdr->length) +
975 sizeof(struct edgeport_fw_hdr);
976
977 if (fw->size != length_total) {
978 dev_err(dev, "bad fw size (expected: %u, got: %zu)\n",
979 length_total, fw->size);
980 return -EINVAL;
981 }
982
983 for (pos = sizeof(struct edgeport_fw_hdr); pos < fw->size; ++pos)
984 checksum += fw->data[pos];
985
986 if (checksum != fw_hdr->checksum) {
987 dev_err(dev, "bad fw checksum (expected: 0x%x, got: 0x%x)\n",
988 fw_hdr->checksum, checksum);
989 return -EINVAL;
990 }
991
992 return 0;
993}
994
995/*
996 * DownloadTIFirmware - Download run-time operating firmware to the TI5052
997 *
998 * This routine downloads the main operating code into the TI5052, using the
999 * boot code already burned into E2PROM or ROM.
1000 */
1001static int download_fw(struct edgeport_serial *serial)
1002{
1003 struct device *dev = &serial->serial->interface->dev;
1004 int status = 0;
1005 struct usb_interface_descriptor *interface;
1006 const struct firmware *fw;
1007 const char *fw_name = "edgeport/down3.bin";
1008 struct edgeport_fw_hdr *fw_hdr;
1009
1010 status = request_firmware(&fw, fw_name, dev);
1011 if (status) {
1012 dev_err(dev, "Failed to load image \"%s\" err %d\n",
1013 fw_name, status);
1014 return status;
1015 }
1016
1017 if (check_fw_sanity(serial, fw)) {
1018 status = -EINVAL;
1019 goto out;
1020 }
1021
1022 fw_hdr = (struct edgeport_fw_hdr *)fw->data;
1023
1024 /* If on-board version is newer, "fw_version" will be updated later. */
1025 serial->fw_version = (fw_hdr->major_version << 8) +
1026 fw_hdr->minor_version;
1027
1028 /*
1029 * This routine is entered by both the BOOT mode and the Download mode
1030 * We can determine which code is running by the reading the config
1031 * descriptor and if we have only one bulk pipe it is in boot mode
1032 */
1033 serial->product_info.hardware_type = HARDWARE_TYPE_TIUMP;
1034
1035 /* Default to type 2 i2c */
1036 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
1037
1038 status = choose_config(serial->serial->dev);
1039 if (status)
1040 goto out;
1041
1042 interface = &serial->serial->interface->cur_altsetting->desc;
1043 if (!interface) {
1044 dev_err(dev, "%s - no interface set, error!\n", __func__);
1045 status = -ENODEV;
1046 goto out;
1047 }
1048
1049 /*
1050 * Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING
1051 * if we have more than one endpoint we are definitely in download
1052 * mode
1053 */
1054 if (interface->bNumEndpoints > 1) {
1055 serial->product_info.TiMode = TI_MODE_DOWNLOAD;
1056 status = do_download_mode(serial, fw);
1057 } else {
1058 /* Otherwise we will remain in configuring mode */
1059 serial->product_info.TiMode = TI_MODE_CONFIGURING;
1060 status = do_boot_mode(serial, fw);
1061 }
1062
1063out:
1064 release_firmware(fw);
1065 return status;
1066}
1067
1068static int do_download_mode(struct edgeport_serial *serial,
1069 const struct firmware *fw)
1070{
1071 struct device *dev = &serial->serial->interface->dev;
1072 int status = 0;
1073 int start_address;
1074 struct edge_ti_manuf_descriptor *ti_manuf_desc;
1075 int download_cur_ver;
1076 int download_new_ver;
1077 struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
1078 struct ti_i2c_desc *rom_desc;
1079
1080 dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__);
1081
1082 status = check_i2c_image(serial);
1083 if (status) {
1084 dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__);
1085 return status;
1086 }
1087
1088 /*
1089 * Validate Hardware version number
1090 * Read Manufacturing Descriptor from TI Based Edgeport
1091 */
1092 ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
1093 if (!ti_manuf_desc)
1094 return -ENOMEM;
1095
1096 status = get_manuf_info(serial, (u8 *)ti_manuf_desc);
1097 if (status) {
1098 kfree(ti_manuf_desc);
1099 return status;
1100 }
1101
1102 /* Check version number of ION descriptor */
1103 if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
1104 dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
1105 __func__, ti_cpu_rev(ti_manuf_desc));
1106 kfree(ti_manuf_desc);
1107 return -EINVAL;
1108 }
1109
1110 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
1111 if (!rom_desc) {
1112 kfree(ti_manuf_desc);
1113 return -ENOMEM;
1114 }
1115
1116 /* Search for type 2 record (firmware record) */
1117 start_address = get_descriptor_addr(serial,
1118 I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
1119 if (start_address != 0) {
1120 struct ti_i2c_firmware_rec *firmware_version;
1121 u8 *record;
1122
1123 dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n",
1124 __func__);
1125
1126 firmware_version = kmalloc(sizeof(*firmware_version),
1127 GFP_KERNEL);
1128 if (!firmware_version) {
1129 kfree(rom_desc);
1130 kfree(ti_manuf_desc);
1131 return -ENOMEM;
1132 }
1133
1134 /*
1135 * Validate version number
1136 * Read the descriptor data
1137 */
1138 status = read_rom(serial, start_address +
1139 sizeof(struct ti_i2c_desc),
1140 sizeof(struct ti_i2c_firmware_rec),
1141 (u8 *)firmware_version);
1142 if (status) {
1143 kfree(firmware_version);
1144 kfree(rom_desc);
1145 kfree(ti_manuf_desc);
1146 return status;
1147 }
1148
1149 /*
1150 * Check version number of download with current
1151 * version in I2c
1152 */
1153 download_cur_ver = (firmware_version->Ver_Major << 8) +
1154 (firmware_version->Ver_Minor);
1155 download_new_ver = (fw_hdr->major_version << 8) +
1156 (fw_hdr->minor_version);
1157
1158 dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n",
1159 __func__, firmware_version->Ver_Major,
1160 firmware_version->Ver_Minor,
1161 fw_hdr->major_version, fw_hdr->minor_version);
1162
1163 /*
1164 * Check if we have an old version in the I2C and
1165 * update if necessary
1166 */
1167 if (download_cur_ver < download_new_ver) {
1168 dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n",
1169 __func__,
1170 firmware_version->Ver_Major,
1171 firmware_version->Ver_Minor,
1172 fw_hdr->major_version,
1173 fw_hdr->minor_version);
1174
1175 record = kmalloc(1, GFP_KERNEL);
1176 if (!record) {
1177 kfree(firmware_version);
1178 kfree(rom_desc);
1179 kfree(ti_manuf_desc);
1180 return -ENOMEM;
1181 }
1182 /*
1183 * In order to update the I2C firmware we must
1184 * change the type 2 record to type 0xF2. This
1185 * will force the UMP to come up in Boot Mode.
1186 * Then while in boot mode, the driver will
1187 * download the latest firmware (padded to
1188 * 15.5k) into the UMP ram. Finally when the
1189 * device comes back up in download mode the
1190 * driver will cause the new firmware to be
1191 * copied from the UMP Ram to I2C and the
1192 * firmware will update the record type from
1193 * 0xf2 to 0x02.
1194 */
1195 *record = I2C_DESC_TYPE_FIRMWARE_BLANK;
1196
1197 /*
1198 * Change the I2C Firmware record type to
1199 * 0xf2 to trigger an update
1200 */
1201 status = write_rom(serial, start_address,
1202 sizeof(*record), record);
1203 if (status) {
1204 kfree(record);
1205 kfree(firmware_version);
1206 kfree(rom_desc);
1207 kfree(ti_manuf_desc);
1208 return status;
1209 }
1210
1211 /*
1212 * verify the write -- must do this in order
1213 * for write to complete before we do the
1214 * hardware reset
1215 */
1216 status = read_rom(serial,
1217 start_address,
1218 sizeof(*record),
1219 record);
1220 if (status) {
1221 kfree(record);
1222 kfree(firmware_version);
1223 kfree(rom_desc);
1224 kfree(ti_manuf_desc);
1225 return status;
1226 }
1227
1228 if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
1229 dev_err(dev, "%s - error resetting device\n",
1230 __func__);
1231 kfree(record);
1232 kfree(firmware_version);
1233 kfree(rom_desc);
1234 kfree(ti_manuf_desc);
1235 return -ENODEV;
1236 }
1237
1238 dev_dbg(dev, "%s - HARDWARE RESET\n", __func__);
1239
1240 /* Reset UMP -- Back to BOOT MODE */
1241 status = ti_vsend_sync(serial->serial->dev,
1242 UMPC_HARDWARE_RESET,
1243 0, 0, NULL, 0,
1244 TI_VSEND_TIMEOUT_DEFAULT);
1245
1246 dev_dbg(dev, "%s - HARDWARE RESET return %d\n",
1247 __func__, status);
1248
1249 /* return an error on purpose. */
1250 kfree(record);
1251 kfree(firmware_version);
1252 kfree(rom_desc);
1253 kfree(ti_manuf_desc);
1254 return -ENODEV;
1255 }
1256 /* Same or newer fw version is already loaded */
1257 serial->fw_version = download_cur_ver;
1258 kfree(firmware_version);
1259 }
1260 /* Search for type 0xF2 record (firmware blank record) */
1261 else {
1262 start_address = get_descriptor_addr(serial,
1263 I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc);
1264 if (start_address != 0) {
1265#define HEADER_SIZE (sizeof(struct ti_i2c_desc) + \
1266 sizeof(struct ti_i2c_firmware_rec))
1267 u8 *header;
1268 u8 *vheader;
1269
1270 header = kmalloc(HEADER_SIZE, GFP_KERNEL);
1271 if (!header) {
1272 kfree(rom_desc);
1273 kfree(ti_manuf_desc);
1274 return -ENOMEM;
1275 }
1276
1277 vheader = kmalloc(HEADER_SIZE, GFP_KERNEL);
1278 if (!vheader) {
1279 kfree(header);
1280 kfree(rom_desc);
1281 kfree(ti_manuf_desc);
1282 return -ENOMEM;
1283 }
1284
1285 dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n",
1286 __func__);
1287
1288 /*
1289 * In order to update the I2C firmware we must change
1290 * the type 2 record to type 0xF2. This will force the
1291 * UMP to come up in Boot Mode. Then while in boot
1292 * mode, the driver will download the latest firmware
1293 * (padded to 15.5k) into the UMP ram. Finally when the
1294 * device comes back up in download mode the driver
1295 * will cause the new firmware to be copied from the
1296 * UMP Ram to I2C and the firmware will update the
1297 * record type from 0xf2 to 0x02.
1298 */
1299 status = build_i2c_fw_hdr(header, fw);
1300 if (status) {
1301 kfree(vheader);
1302 kfree(header);
1303 kfree(rom_desc);
1304 kfree(ti_manuf_desc);
1305 return -EINVAL;
1306 }
1307
1308 /*
1309 * Update I2C with type 0xf2 record with correct
1310 * size and checksum
1311 */
1312 status = write_rom(serial,
1313 start_address,
1314 HEADER_SIZE,
1315 header);
1316 if (status) {
1317 kfree(vheader);
1318 kfree(header);
1319 kfree(rom_desc);
1320 kfree(ti_manuf_desc);
1321 return -EINVAL;
1322 }
1323
1324 /*
1325 * verify the write -- must do this in order for
1326 * write to complete before we do the hardware reset
1327 */
1328 status = read_rom(serial, start_address,
1329 HEADER_SIZE, vheader);
1330
1331 if (status) {
1332 dev_dbg(dev, "%s - can't read header back\n",
1333 __func__);
1334 kfree(vheader);
1335 kfree(header);
1336 kfree(rom_desc);
1337 kfree(ti_manuf_desc);
1338 return status;
1339 }
1340 if (memcmp(vheader, header, HEADER_SIZE)) {
1341 dev_dbg(dev, "%s - write download record failed\n",
1342 __func__);
1343 kfree(vheader);
1344 kfree(header);
1345 kfree(rom_desc);
1346 kfree(ti_manuf_desc);
1347 return -EINVAL;
1348 }
1349
1350 kfree(vheader);
1351 kfree(header);
1352
1353 dev_dbg(dev, "%s - Start firmware update\n", __func__);
1354
1355 /* Tell firmware to copy download image into I2C */
1356 status = ti_vsend_sync(serial->serial->dev,
1357 UMPC_COPY_DNLD_TO_I2C,
1358 0, 0, NULL, 0,
1359 TI_VSEND_TIMEOUT_FW_DOWNLOAD);
1360
1361 dev_dbg(dev, "%s - Update complete 0x%x\n", __func__,
1362 status);
1363 if (status) {
1364 dev_err(dev,
1365 "%s - UMPC_COPY_DNLD_TO_I2C failed\n",
1366 __func__);
1367 kfree(rom_desc);
1368 kfree(ti_manuf_desc);
1369 return status;
1370 }
1371 }
1372 }
1373
1374 /* The device is running the download code */
1375 kfree(rom_desc);
1376 kfree(ti_manuf_desc);
1377 return 0;
1378}
1379
1380static int do_boot_mode(struct edgeport_serial *serial,
1381 const struct firmware *fw)
1382{
1383 struct device *dev = &serial->serial->interface->dev;
1384 int status = 0;
1385 struct edge_ti_manuf_descriptor *ti_manuf_desc;
1386 struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
1387
1388 dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__);
1389
1390 /* Configure the TI device so we can use the BULK pipes for download */
1391 status = config_boot_dev(serial->serial->dev);
1392 if (status)
1393 return status;
1394
1395 if (le16_to_cpu(serial->serial->dev->descriptor.idVendor)
1396 != USB_VENDOR_ID_ION) {
1397 dev_dbg(dev, "%s - VID = 0x%x\n", __func__,
1398 le16_to_cpu(serial->serial->dev->descriptor.idVendor));
1399 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
1400 goto stayinbootmode;
1401 }
1402
1403 /*
1404 * We have an ION device (I2c Must be programmed)
1405 * Determine I2C image type
1406 */
1407 if (i2c_type_bootmode(serial))
1408 goto stayinbootmode;
1409
1410 /* Check for ION Vendor ID and that the I2C is valid */
1411 if (!check_i2c_image(serial)) {
1412 struct ti_i2c_image_header *header;
1413 int i;
1414 u8 cs = 0;
1415 u8 *buffer;
1416 int buffer_size;
1417
1418 /*
1419 * Validate Hardware version number
1420 * Read Manufacturing Descriptor from TI Based Edgeport
1421 */
1422 ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
1423 if (!ti_manuf_desc)
1424 return -ENOMEM;
1425
1426 status = get_manuf_info(serial, (u8 *)ti_manuf_desc);
1427 if (status) {
1428 kfree(ti_manuf_desc);
1429 goto stayinbootmode;
1430 }
1431
1432 /* Check for version 2 */
1433 if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
1434 dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
1435 __func__, ti_cpu_rev(ti_manuf_desc));
1436 kfree(ti_manuf_desc);
1437 goto stayinbootmode;
1438 }
1439
1440 kfree(ti_manuf_desc);
1441
1442 /*
1443 * In order to update the I2C firmware we must change the type
1444 * 2 record to type 0xF2. This will force the UMP to come up
1445 * in Boot Mode. Then while in boot mode, the driver will
1446 * download the latest firmware (padded to 15.5k) into the
1447 * UMP ram. Finally when the device comes back up in download
1448 * mode the driver will cause the new firmware to be copied
1449 * from the UMP Ram to I2C and the firmware will update the
1450 * record type from 0xf2 to 0x02.
1451 *
1452 * Do we really have to copy the whole firmware image,
1453 * or could we do this in place!
1454 */
1455
1456 /* Allocate a 15.5k buffer + 3 byte header */
1457 buffer_size = (((1024 * 16) - 512) +
1458 sizeof(struct ti_i2c_image_header));
1459 buffer = kmalloc(buffer_size, GFP_KERNEL);
1460 if (!buffer)
1461 return -ENOMEM;
1462
1463 /* Initialize the buffer to 0xff (pad the buffer) */
1464 memset(buffer, 0xff, buffer_size);
1465 memcpy(buffer, &fw->data[4], fw->size - 4);
1466
1467 for (i = sizeof(struct ti_i2c_image_header);
1468 i < buffer_size; i++) {
1469 cs = (u8)(cs + buffer[i]);
1470 }
1471
1472 header = (struct ti_i2c_image_header *)buffer;
1473
1474 /* update length and checksum after padding */
1475 header->Length = cpu_to_le16((u16)(buffer_size -
1476 sizeof(struct ti_i2c_image_header)));
1477 header->CheckSum = cs;
1478
1479 /* Download the operational code */
1480 dev_dbg(dev, "%s - Downloading operational code image version %d.%d (TI UMP)\n",
1481 __func__,
1482 fw_hdr->major_version, fw_hdr->minor_version);
1483 status = download_code(serial, buffer, buffer_size);
1484
1485 kfree(buffer);
1486
1487 if (status) {
1488 dev_dbg(dev, "%s - Error downloading operational code image\n", __func__);
1489 return status;
1490 }
1491
1492 /* Device will reboot */
1493 serial->product_info.TiMode = TI_MODE_TRANSITIONING;
1494
1495 dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
1496
1497 return 1;
1498 }
1499
1500stayinbootmode:
1501 /* Eprom is invalid or blank stay in boot mode */
1502 dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
1503 serial->product_info.TiMode = TI_MODE_BOOT;
1504
1505 return 1;
1506}
1507
1508static int ti_do_config(struct edgeport_port *port, int feature, int on)
1509{
1510 on = !!on; /* 1 or 0 not bitmask */
1511
1512 return send_port_cmd(port->port, feature, on, NULL, 0);
1513}
1514
1515static int restore_mcr(struct edgeport_port *port, u8 mcr)
1516{
1517 int status = 0;
1518
1519 dev_dbg(&port->port->dev, "%s - %x\n", __func__, mcr);
1520
1521 status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR);
1522 if (status)
1523 return status;
1524 status = ti_do_config(port, UMPC_SET_CLR_RTS, mcr & MCR_RTS);
1525 if (status)
1526 return status;
1527 return ti_do_config(port, UMPC_SET_CLR_LOOPBACK, mcr & MCR_LOOPBACK);
1528}
1529
1530/* Convert TI LSR to standard UART flags */
1531static u8 map_line_status(u8 ti_lsr)
1532{
1533 u8 lsr = 0;
1534
1535#define MAP_FLAG(flagUmp, flagUart) \
1536 if (ti_lsr & flagUmp) \
1537 lsr |= flagUart;
1538
1539 MAP_FLAG(UMP_UART_LSR_OV_MASK, LSR_OVER_ERR) /* overrun */
1540 MAP_FLAG(UMP_UART_LSR_PE_MASK, LSR_PAR_ERR) /* parity error */
1541 MAP_FLAG(UMP_UART_LSR_FE_MASK, LSR_FRM_ERR) /* framing error */
1542 MAP_FLAG(UMP_UART_LSR_BR_MASK, LSR_BREAK) /* break detected */
1543 MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL) /* rx data available */
1544 MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY) /* tx hold reg empty */
1545
1546#undef MAP_FLAG
1547
1548 return lsr;
1549}
1550
1551static void handle_new_msr(struct edgeport_port *edge_port, u8 msr)
1552{
1553 struct async_icount *icount;
1554 struct tty_struct *tty;
1555
1556 dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, msr);
1557
1558 if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
1559 EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
1560 icount = &edge_port->port->icount;
1561
1562 /* update input line counters */
1563 if (msr & EDGEPORT_MSR_DELTA_CTS)
1564 icount->cts++;
1565 if (msr & EDGEPORT_MSR_DELTA_DSR)
1566 icount->dsr++;
1567 if (msr & EDGEPORT_MSR_DELTA_CD)
1568 icount->dcd++;
1569 if (msr & EDGEPORT_MSR_DELTA_RI)
1570 icount->rng++;
1571 wake_up_interruptible(&edge_port->port->port.delta_msr_wait);
1572 }
1573
1574 /* Save the new modem status */
1575 edge_port->shadow_msr = msr & 0xf0;
1576
1577 tty = tty_port_tty_get(&edge_port->port->port);
1578 /* handle CTS flow control */
1579 if (tty && C_CRTSCTS(tty)) {
1580 if (msr & EDGEPORT_MSR_CTS)
1581 tty_wakeup(tty);
1582 }
1583 tty_kref_put(tty);
1584}
1585
1586static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
1587 u8 lsr, u8 data)
1588{
1589 struct async_icount *icount;
1590 u8 new_lsr = (u8)(lsr & (u8)(LSR_OVER_ERR | LSR_PAR_ERR |
1591 LSR_FRM_ERR | LSR_BREAK));
1592
1593 dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr);
1594
1595 edge_port->shadow_lsr = lsr;
1596
1597 if (new_lsr & LSR_BREAK)
1598 /*
1599 * Parity and Framing errors only count if they
1600 * occur exclusive of a break being received.
1601 */
1602 new_lsr &= (u8)(LSR_OVER_ERR | LSR_BREAK);
1603
1604 /* Place LSR data byte into Rx buffer */
1605 if (lsr_data)
1606 edge_tty_recv(edge_port->port, &data, 1);
1607
1608 /* update input line counters */
1609 icount = &edge_port->port->icount;
1610 if (new_lsr & LSR_BREAK)
1611 icount->brk++;
1612 if (new_lsr & LSR_OVER_ERR)
1613 icount->overrun++;
1614 if (new_lsr & LSR_PAR_ERR)
1615 icount->parity++;
1616 if (new_lsr & LSR_FRM_ERR)
1617 icount->frame++;
1618}
1619
1620static void edge_interrupt_callback(struct urb *urb)
1621{
1622 struct edgeport_serial *edge_serial = urb->context;
1623 struct usb_serial_port *port;
1624 struct edgeport_port *edge_port;
1625 struct device *dev;
1626 unsigned char *data = urb->transfer_buffer;
1627 int length = urb->actual_length;
1628 int port_number;
1629 int function;
1630 int retval;
1631 u8 lsr;
1632 u8 msr;
1633 int status = urb->status;
1634
1635 switch (status) {
1636 case 0:
1637 /* success */
1638 break;
1639 case -ECONNRESET:
1640 case -ENOENT:
1641 case -ESHUTDOWN:
1642 /* this urb is terminated, clean up */
1643 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
1644 __func__, status);
1645 return;
1646 default:
1647 dev_err(&urb->dev->dev, "%s - nonzero urb status received: "
1648 "%d\n", __func__, status);
1649 goto exit;
1650 }
1651
1652 if (!length) {
1653 dev_dbg(&urb->dev->dev, "%s - no data in urb\n", __func__);
1654 goto exit;
1655 }
1656
1657 dev = &edge_serial->serial->dev->dev;
1658 usb_serial_debug_data(dev, __func__, length, data);
1659
1660 if (length != 2) {
1661 dev_dbg(dev, "%s - expecting packet of size 2, got %d\n", __func__, length);
1662 goto exit;
1663 }
1664
1665 port_number = TIUMP_GET_PORT_FROM_CODE(data[0]);
1666 function = TIUMP_GET_FUNC_FROM_CODE(data[0]);
1667 dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__,
1668 port_number, function, data[1]);
1669
1670 if (port_number >= edge_serial->serial->num_ports) {
1671 dev_err(dev, "bad port number %d\n", port_number);
1672 goto exit;
1673 }
1674
1675 port = edge_serial->serial->port[port_number];
1676 edge_port = usb_get_serial_port_data(port);
1677 if (!edge_port) {
1678 dev_dbg(dev, "%s - edge_port not found\n", __func__);
1679 return;
1680 }
1681 switch (function) {
1682 case TIUMP_INTERRUPT_CODE_LSR:
1683 lsr = map_line_status(data[1]);
1684 if (lsr & UMP_UART_LSR_DATA_MASK) {
1685 /*
1686 * Save the LSR event for bulk read completion routine
1687 */
1688 dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n",
1689 __func__, port_number, lsr);
1690 edge_port->lsr_event = 1;
1691 edge_port->lsr_mask = lsr;
1692 } else {
1693 dev_dbg(dev, "%s - ===== Port %d LSR Status = %02x ======\n",
1694 __func__, port_number, lsr);
1695 handle_new_lsr(edge_port, 0, lsr, 0);
1696 }
1697 break;
1698
1699 case TIUMP_INTERRUPT_CODE_MSR: /* MSR */
1700 /* Copy MSR from UMP */
1701 msr = data[1];
1702 dev_dbg(dev, "%s - ===== Port %u MSR Status = %02x ======\n",
1703 __func__, port_number, msr);
1704 handle_new_msr(edge_port, msr);
1705 break;
1706
1707 default:
1708 dev_err(&urb->dev->dev,
1709 "%s - Unknown Interrupt code from UMP %x\n",
1710 __func__, data[1]);
1711 break;
1712
1713 }
1714
1715exit:
1716 retval = usb_submit_urb(urb, GFP_ATOMIC);
1717 if (retval)
1718 dev_err(&urb->dev->dev,
1719 "%s - usb_submit_urb failed with result %d\n",
1720 __func__, retval);
1721}
1722
1723static void edge_bulk_in_callback(struct urb *urb)
1724{
1725 struct edgeport_port *edge_port = urb->context;
1726 struct device *dev = &edge_port->port->dev;
1727 unsigned char *data = urb->transfer_buffer;
1728 unsigned long flags;
1729 int retval = 0;
1730 int port_number;
1731 int status = urb->status;
1732
1733 switch (status) {
1734 case 0:
1735 /* success */
1736 break;
1737 case -ECONNRESET:
1738 case -ENOENT:
1739 case -ESHUTDOWN:
1740 /* this urb is terminated, clean up */
1741 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
1742 return;
1743 default:
1744 dev_err(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status);
1745 }
1746
1747 if (status == -EPIPE)
1748 goto exit;
1749
1750 if (status) {
1751 dev_err(&urb->dev->dev, "%s - stopping read!\n", __func__);
1752 return;
1753 }
1754
1755 port_number = edge_port->port->port_number;
1756
1757 if (urb->actual_length > 0 && edge_port->lsr_event) {
1758 edge_port->lsr_event = 0;
1759 dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n",
1760 __func__, port_number, edge_port->lsr_mask, *data);
1761 handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data);
1762 /* Adjust buffer length/pointer */
1763 --urb->actual_length;
1764 ++data;
1765 }
1766
1767 if (urb->actual_length) {
1768 usb_serial_debug_data(dev, __func__, urb->actual_length, data);
1769 if (edge_port->close_pending)
1770 dev_dbg(dev, "%s - close pending, dropping data on the floor\n",
1771 __func__);
1772 else
1773 edge_tty_recv(edge_port->port, data,
1774 urb->actual_length);
1775 edge_port->port->icount.rx += urb->actual_length;
1776 }
1777
1778exit:
1779 /* continue read unless stopped */
1780 spin_lock_irqsave(&edge_port->ep_lock, flags);
1781 if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
1782 retval = usb_submit_urb(urb, GFP_ATOMIC);
1783 else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING)
1784 edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPED;
1785
1786 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1787 if (retval)
1788 dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval);
1789}
1790
1791static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
1792 int length)
1793{
1794 int queued;
1795
1796 queued = tty_insert_flip_string(&port->port, data, length);
1797 if (queued < length)
1798 dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
1799 __func__, length - queued);
1800 tty_flip_buffer_push(&port->port);
1801}
1802
1803static void edge_bulk_out_callback(struct urb *urb)
1804{
1805 struct usb_serial_port *port = urb->context;
1806 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1807 int status = urb->status;
1808 struct tty_struct *tty;
1809
1810 edge_port->ep_write_urb_in_use = 0;
1811
1812 switch (status) {
1813 case 0:
1814 /* success */
1815 break;
1816 case -ECONNRESET:
1817 case -ENOENT:
1818 case -ESHUTDOWN:
1819 /* this urb is terminated, clean up */
1820 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
1821 __func__, status);
1822 return;
1823 default:
1824 dev_err_console(port, "%s - nonzero write bulk status "
1825 "received: %d\n", __func__, status);
1826 }
1827
1828 /* send any buffered data */
1829 tty = tty_port_tty_get(&port->port);
1830 edge_send(port, tty);
1831 tty_kref_put(tty);
1832}
1833
1834static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
1835{
1836 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1837 struct edgeport_serial *edge_serial;
1838 struct usb_device *dev;
1839 struct urb *urb;
1840 int status;
1841 u16 open_settings;
1842 u8 transaction_timeout;
1843
1844 if (edge_port == NULL)
1845 return -ENODEV;
1846
1847 dev = port->serial->dev;
1848
1849 /* turn off loopback */
1850 status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
1851 if (status) {
1852 dev_err(&port->dev,
1853 "%s - cannot send clear loopback command, %d\n",
1854 __func__, status);
1855 return status;
1856 }
1857
1858 /* set up the port settings */
1859 if (tty)
1860 edge_set_termios(tty, port, &tty->termios);
1861
1862 /* open up the port */
1863
1864 /* milliseconds to timeout for DMA transfer */
1865 transaction_timeout = 2;
1866
1867 edge_port->ump_read_timeout =
1868 max(20, ((transaction_timeout * 3) / 2));
1869
1870 /* milliseconds to timeout for DMA transfer */
1871 open_settings = (u8)(UMP_DMA_MODE_CONTINOUS |
1872 UMP_PIPE_TRANS_TIMEOUT_ENA |
1873 (transaction_timeout << 2));
1874
1875 dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__);
1876
1877 /* Tell TI to open and start the port */
1878 status = send_port_cmd(port, UMPC_OPEN_PORT, open_settings, NULL, 0);
1879 if (status) {
1880 dev_err(&port->dev, "%s - cannot send open command, %d\n",
1881 __func__, status);
1882 return status;
1883 }
1884
1885 /* Start the DMA? */
1886 status = send_port_cmd(port, UMPC_START_PORT, 0, NULL, 0);
1887 if (status) {
1888 dev_err(&port->dev, "%s - cannot send start DMA command, %d\n",
1889 __func__, status);
1890 return status;
1891 }
1892
1893 /* Clear TX and RX buffers in UMP */
1894 status = purge_port(port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
1895 if (status) {
1896 dev_err(&port->dev,
1897 "%s - cannot send clear buffers command, %d\n",
1898 __func__, status);
1899 return status;
1900 }
1901
1902 /* Read Initial MSR */
1903 status = read_port_cmd(port, UMPC_READ_MSR, 0, &edge_port->shadow_msr, 1);
1904 if (status) {
1905 dev_err(&port->dev, "%s - cannot send read MSR command, %d\n",
1906 __func__, status);
1907 return status;
1908 }
1909
1910 dev_dbg(&port->dev, "ShadowMSR 0x%X\n", edge_port->shadow_msr);
1911
1912 /* Set Initial MCR */
1913 edge_port->shadow_mcr = MCR_RTS | MCR_DTR;
1914 dev_dbg(&port->dev, "ShadowMCR 0x%X\n", edge_port->shadow_mcr);
1915
1916 edge_serial = edge_port->edge_serial;
1917 if (mutex_lock_interruptible(&edge_serial->es_lock))
1918 return -ERESTARTSYS;
1919 if (edge_serial->num_ports_open == 0) {
1920 /* we are the first port to open, post the interrupt urb */
1921 urb = edge_serial->serial->port[0]->interrupt_in_urb;
1922 urb->context = edge_serial;
1923 status = usb_submit_urb(urb, GFP_KERNEL);
1924 if (status) {
1925 dev_err(&port->dev,
1926 "%s - usb_submit_urb failed with value %d\n",
1927 __func__, status);
1928 goto release_es_lock;
1929 }
1930 }
1931
1932 /*
1933 * reset the data toggle on the bulk endpoints to work around bug in
1934 * host controllers where things get out of sync some times
1935 */
1936 usb_clear_halt(dev, port->write_urb->pipe);
1937 usb_clear_halt(dev, port->read_urb->pipe);
1938
1939 /* start up our bulk read urb */
1940 urb = port->read_urb;
1941 edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
1942 urb->context = edge_port;
1943 status = usb_submit_urb(urb, GFP_KERNEL);
1944 if (status) {
1945 dev_err(&port->dev,
1946 "%s - read bulk usb_submit_urb failed with value %d\n",
1947 __func__, status);
1948 goto unlink_int_urb;
1949 }
1950
1951 ++edge_serial->num_ports_open;
1952
1953 goto release_es_lock;
1954
1955unlink_int_urb:
1956 if (edge_port->edge_serial->num_ports_open == 0)
1957 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
1958release_es_lock:
1959 mutex_unlock(&edge_serial->es_lock);
1960 return status;
1961}
1962
1963static void edge_close(struct usb_serial_port *port)
1964{
1965 struct edgeport_serial *edge_serial;
1966 struct edgeport_port *edge_port;
1967 unsigned long flags;
1968
1969 edge_serial = usb_get_serial_data(port->serial);
1970 edge_port = usb_get_serial_port_data(port);
1971 if (edge_serial == NULL || edge_port == NULL)
1972 return;
1973
1974 /*
1975 * The bulkreadcompletion routine will check
1976 * this flag and dump add read data
1977 */
1978 edge_port->close_pending = 1;
1979
1980 usb_kill_urb(port->read_urb);
1981 usb_kill_urb(port->write_urb);
1982 edge_port->ep_write_urb_in_use = 0;
1983 spin_lock_irqsave(&edge_port->ep_lock, flags);
1984 kfifo_reset_out(&port->write_fifo);
1985 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1986
1987 dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__);
1988 send_port_cmd(port, UMPC_CLOSE_PORT, 0, NULL, 0);
1989
1990 mutex_lock(&edge_serial->es_lock);
1991 --edge_port->edge_serial->num_ports_open;
1992 if (edge_port->edge_serial->num_ports_open <= 0) {
1993 /* last port is now closed, let's shut down our interrupt urb */
1994 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
1995 edge_port->edge_serial->num_ports_open = 0;
1996 }
1997 mutex_unlock(&edge_serial->es_lock);
1998 edge_port->close_pending = 0;
1999}
2000
2001static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
2002 const unsigned char *data, int count)
2003{
2004 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2005
2006 if (count == 0) {
2007 dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
2008 return 0;
2009 }
2010
2011 if (edge_port == NULL)
2012 return -ENODEV;
2013 if (edge_port->close_pending == 1)
2014 return -ENODEV;
2015
2016 count = kfifo_in_locked(&port->write_fifo, data, count,
2017 &edge_port->ep_lock);
2018 edge_send(port, tty);
2019
2020 return count;
2021}
2022
2023static void edge_send(struct usb_serial_port *port, struct tty_struct *tty)
2024{
2025 int count, result;
2026 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2027 unsigned long flags;
2028
2029 spin_lock_irqsave(&edge_port->ep_lock, flags);
2030
2031 if (edge_port->ep_write_urb_in_use) {
2032 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2033 return;
2034 }
2035
2036 count = kfifo_out(&port->write_fifo,
2037 port->write_urb->transfer_buffer,
2038 port->bulk_out_size);
2039
2040 if (count == 0) {
2041 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2042 return;
2043 }
2044
2045 edge_port->ep_write_urb_in_use = 1;
2046
2047 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2048
2049 usb_serial_debug_data(&port->dev, __func__, count, port->write_urb->transfer_buffer);
2050
2051 /* set up our urb */
2052 port->write_urb->transfer_buffer_length = count;
2053
2054 /* send the data out the bulk port */
2055 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
2056 if (result) {
2057 dev_err_console(port,
2058 "%s - failed submitting write urb, error %d\n",
2059 __func__, result);
2060 edge_port->ep_write_urb_in_use = 0;
2061 /* TODO: reschedule edge_send */
2062 } else
2063 edge_port->port->icount.tx += count;
2064
2065 /*
2066 * wakeup any process waiting for writes to complete
2067 * there is now more room in the buffer for new writes
2068 */
2069 if (tty)
2070 tty_wakeup(tty);
2071}
2072
2073static unsigned int edge_write_room(struct tty_struct *tty)
2074{
2075 struct usb_serial_port *port = tty->driver_data;
2076 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2077 unsigned int room;
2078 unsigned long flags;
2079
2080 if (edge_port == NULL)
2081 return 0;
2082 if (edge_port->close_pending == 1)
2083 return 0;
2084
2085 spin_lock_irqsave(&edge_port->ep_lock, flags);
2086 room = kfifo_avail(&port->write_fifo);
2087 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2088
2089 dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
2090 return room;
2091}
2092
2093static unsigned int edge_chars_in_buffer(struct tty_struct *tty)
2094{
2095 struct usb_serial_port *port = tty->driver_data;
2096 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2097 unsigned int chars;
2098 unsigned long flags;
2099 if (edge_port == NULL)
2100 return 0;
2101
2102 spin_lock_irqsave(&edge_port->ep_lock, flags);
2103 chars = kfifo_len(&port->write_fifo);
2104 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2105
2106 dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
2107 return chars;
2108}
2109
2110static bool edge_tx_empty(struct usb_serial_port *port)
2111{
2112 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2113 int ret;
2114
2115 ret = tx_active(edge_port);
2116 if (ret > 0)
2117 return false;
2118
2119 return true;
2120}
2121
2122static void edge_throttle(struct tty_struct *tty)
2123{
2124 struct usb_serial_port *port = tty->driver_data;
2125 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2126 int status;
2127
2128 if (edge_port == NULL)
2129 return;
2130
2131 /* if we are implementing XON/XOFF, send the stop character */
2132 if (I_IXOFF(tty)) {
2133 unsigned char stop_char = STOP_CHAR(tty);
2134 status = edge_write(tty, port, &stop_char, 1);
2135 if (status <= 0) {
2136 dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
2137 }
2138 }
2139
2140 /*
2141 * if we are implementing RTS/CTS, stop reads
2142 * and the Edgeport will clear the RTS line
2143 */
2144 if (C_CRTSCTS(tty))
2145 stop_read(edge_port);
2146
2147}
2148
2149static void edge_unthrottle(struct tty_struct *tty)
2150{
2151 struct usb_serial_port *port = tty->driver_data;
2152 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2153 int status;
2154
2155 if (edge_port == NULL)
2156 return;
2157
2158 /* if we are implementing XON/XOFF, send the start character */
2159 if (I_IXOFF(tty)) {
2160 unsigned char start_char = START_CHAR(tty);
2161 status = edge_write(tty, port, &start_char, 1);
2162 if (status <= 0) {
2163 dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
2164 }
2165 }
2166 /*
2167 * if we are implementing RTS/CTS, restart reads
2168 * are the Edgeport will assert the RTS line
2169 */
2170 if (C_CRTSCTS(tty)) {
2171 status = restart_read(edge_port);
2172 if (status)
2173 dev_err(&port->dev,
2174 "%s - read bulk usb_submit_urb failed: %d\n",
2175 __func__, status);
2176 }
2177
2178}
2179
2180static void stop_read(struct edgeport_port *edge_port)
2181{
2182 unsigned long flags;
2183
2184 spin_lock_irqsave(&edge_port->ep_lock, flags);
2185
2186 if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
2187 edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPING;
2188 edge_port->shadow_mcr &= ~MCR_RTS;
2189
2190 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2191}
2192
2193static int restart_read(struct edgeport_port *edge_port)
2194{
2195 struct urb *urb;
2196 int status = 0;
2197 unsigned long flags;
2198
2199 spin_lock_irqsave(&edge_port->ep_lock, flags);
2200
2201 if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPED) {
2202 urb = edge_port->port->read_urb;
2203 status = usb_submit_urb(urb, GFP_ATOMIC);
2204 }
2205 edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
2206 edge_port->shadow_mcr |= MCR_RTS;
2207
2208 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2209
2210 return status;
2211}
2212
2213static void change_port_settings(struct tty_struct *tty,
2214 struct edgeport_port *edge_port, const struct ktermios *old_termios)
2215{
2216 struct device *dev = &edge_port->port->dev;
2217 struct ump_uart_config *config;
2218 int baud;
2219 unsigned cflag;
2220 int status;
2221
2222 config = kmalloc (sizeof (*config), GFP_KERNEL);
2223 if (!config) {
2224 tty->termios = *old_termios;
2225 return;
2226 }
2227
2228 cflag = tty->termios.c_cflag;
2229
2230 config->wFlags = 0;
2231
2232 /* These flags must be set */
2233 config->wFlags |= UMP_MASK_UART_FLAGS_RECEIVE_MS_INT;
2234 config->wFlags |= UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR;
2235 config->bUartMode = (u8)(edge_port->bUartMode);
2236
2237 switch (cflag & CSIZE) {
2238 case CS5:
2239 config->bDataBits = UMP_UART_CHAR5BITS;
2240 dev_dbg(dev, "%s - data bits = 5\n", __func__);
2241 break;
2242 case CS6:
2243 config->bDataBits = UMP_UART_CHAR6BITS;
2244 dev_dbg(dev, "%s - data bits = 6\n", __func__);
2245 break;
2246 case CS7:
2247 config->bDataBits = UMP_UART_CHAR7BITS;
2248 dev_dbg(dev, "%s - data bits = 7\n", __func__);
2249 break;
2250 default:
2251 case CS8:
2252 config->bDataBits = UMP_UART_CHAR8BITS;
2253 dev_dbg(dev, "%s - data bits = 8\n", __func__);
2254 break;
2255 }
2256
2257 if (cflag & PARENB) {
2258 if (cflag & PARODD) {
2259 config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
2260 config->bParity = UMP_UART_ODDPARITY;
2261 dev_dbg(dev, "%s - parity = odd\n", __func__);
2262 } else {
2263 config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
2264 config->bParity = UMP_UART_EVENPARITY;
2265 dev_dbg(dev, "%s - parity = even\n", __func__);
2266 }
2267 } else {
2268 config->bParity = UMP_UART_NOPARITY;
2269 dev_dbg(dev, "%s - parity = none\n", __func__);
2270 }
2271
2272 if (cflag & CSTOPB) {
2273 config->bStopBits = UMP_UART_STOPBIT2;
2274 dev_dbg(dev, "%s - stop bits = 2\n", __func__);
2275 } else {
2276 config->bStopBits = UMP_UART_STOPBIT1;
2277 dev_dbg(dev, "%s - stop bits = 1\n", __func__);
2278 }
2279
2280 /* figure out the flow control settings */
2281 if (cflag & CRTSCTS) {
2282 config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW;
2283 config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW;
2284 dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
2285 } else {
2286 dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
2287 restart_read(edge_port);
2288 }
2289
2290 /*
2291 * if we are implementing XON/XOFF, set the start and stop
2292 * character in the device
2293 */
2294 config->cXon = START_CHAR(tty);
2295 config->cXoff = STOP_CHAR(tty);
2296
2297 /* if we are implementing INBOUND XON/XOFF */
2298 if (I_IXOFF(tty)) {
2299 config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
2300 dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
2301 __func__, config->cXon, config->cXoff);
2302 } else
2303 dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__);
2304
2305 /* if we are implementing OUTBOUND XON/XOFF */
2306 if (I_IXON(tty)) {
2307 config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
2308 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
2309 __func__, config->cXon, config->cXoff);
2310 } else
2311 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__);
2312
2313 tty->termios.c_cflag &= ~CMSPAR;
2314
2315 /* Round the baud rate */
2316 baud = tty_get_baud_rate(tty);
2317 if (!baud) {
2318 /* pick a default, any default... */
2319 baud = 9600;
2320 } else {
2321 /* Avoid a zero divisor. */
2322 baud = min(baud, 461550);
2323 tty_encode_baud_rate(tty, baud, baud);
2324 }
2325
2326 edge_port->baud_rate = baud;
2327 config->wBaudRate = (u16)((461550L + baud/2) / baud);
2328
2329 /* FIXME: Recompute actual baud from divisor here */
2330
2331 dev_dbg(dev, "%s - baud rate = %d, wBaudRate = %d\n", __func__, baud, config->wBaudRate);
2332
2333 dev_dbg(dev, "wBaudRate: %d\n", (int)(461550L / config->wBaudRate));
2334 dev_dbg(dev, "wFlags: 0x%x\n", config->wFlags);
2335 dev_dbg(dev, "bDataBits: %d\n", config->bDataBits);
2336 dev_dbg(dev, "bParity: %d\n", config->bParity);
2337 dev_dbg(dev, "bStopBits: %d\n", config->bStopBits);
2338 dev_dbg(dev, "cXon: %d\n", config->cXon);
2339 dev_dbg(dev, "cXoff: %d\n", config->cXoff);
2340 dev_dbg(dev, "bUartMode: %d\n", config->bUartMode);
2341
2342 /* move the word values into big endian mode */
2343 cpu_to_be16s(&config->wFlags);
2344 cpu_to_be16s(&config->wBaudRate);
2345
2346 status = send_port_cmd(edge_port->port, UMPC_SET_CONFIG, 0, config,
2347 sizeof(*config));
2348 if (status)
2349 dev_dbg(dev, "%s - error %d when trying to write config to device\n",
2350 __func__, status);
2351 kfree(config);
2352}
2353
2354static void edge_set_termios(struct tty_struct *tty,
2355 struct usb_serial_port *port,
2356 const struct ktermios *old_termios)
2357{
2358 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2359
2360 if (edge_port == NULL)
2361 return;
2362 /* change the port settings to the new ones specified */
2363 change_port_settings(tty, edge_port, old_termios);
2364}
2365
2366static int edge_tiocmset(struct tty_struct *tty,
2367 unsigned int set, unsigned int clear)
2368{
2369 struct usb_serial_port *port = tty->driver_data;
2370 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2371 unsigned int mcr;
2372 unsigned long flags;
2373
2374 spin_lock_irqsave(&edge_port->ep_lock, flags);
2375 mcr = edge_port->shadow_mcr;
2376 if (set & TIOCM_RTS)
2377 mcr |= MCR_RTS;
2378 if (set & TIOCM_DTR)
2379 mcr |= MCR_DTR;
2380 if (set & TIOCM_LOOP)
2381 mcr |= MCR_LOOPBACK;
2382
2383 if (clear & TIOCM_RTS)
2384 mcr &= ~MCR_RTS;
2385 if (clear & TIOCM_DTR)
2386 mcr &= ~MCR_DTR;
2387 if (clear & TIOCM_LOOP)
2388 mcr &= ~MCR_LOOPBACK;
2389
2390 edge_port->shadow_mcr = mcr;
2391 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2392
2393 restore_mcr(edge_port, mcr);
2394 return 0;
2395}
2396
2397static int edge_tiocmget(struct tty_struct *tty)
2398{
2399 struct usb_serial_port *port = tty->driver_data;
2400 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2401 unsigned int result = 0;
2402 unsigned int msr;
2403 unsigned int mcr;
2404 unsigned long flags;
2405
2406 spin_lock_irqsave(&edge_port->ep_lock, flags);
2407
2408 msr = edge_port->shadow_msr;
2409 mcr = edge_port->shadow_mcr;
2410 result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */
2411 | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */
2412 | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */
2413 | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */
2414 | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */
2415 | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
2416
2417
2418 dev_dbg(&port->dev, "%s -- %x\n", __func__, result);
2419 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2420
2421 return result;
2422}
2423
2424static int edge_break(struct tty_struct *tty, int break_state)
2425{
2426 struct usb_serial_port *port = tty->driver_data;
2427 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2428 int status;
2429 int bv = 0; /* Off */
2430
2431 if (break_state == -1)
2432 bv = 1; /* On */
2433
2434 status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv);
2435 if (status) {
2436 dev_dbg(&port->dev, "%s - error %d sending break set/clear command.\n",
2437 __func__, status);
2438 return status;
2439 }
2440
2441 return 0;
2442}
2443
2444static void edge_heartbeat_schedule(struct edgeport_serial *edge_serial)
2445{
2446 if (!edge_serial->use_heartbeat)
2447 return;
2448
2449 schedule_delayed_work(&edge_serial->heartbeat_work,
2450 FW_HEARTBEAT_SECS * HZ);
2451}
2452
2453static void edge_heartbeat_work(struct work_struct *work)
2454{
2455 struct edgeport_serial *serial;
2456 struct ti_i2c_desc *rom_desc;
2457
2458 serial = container_of(work, struct edgeport_serial,
2459 heartbeat_work.work);
2460
2461 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
2462
2463 /* Descriptor address request is enough to reset the firmware timer */
2464 if (!rom_desc || !get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
2465 rom_desc)) {
2466 dev_err(&serial->serial->interface->dev,
2467 "%s - Incomplete heartbeat\n", __func__);
2468 }
2469 kfree(rom_desc);
2470
2471 edge_heartbeat_schedule(serial);
2472}
2473
2474static int edge_calc_num_ports(struct usb_serial *serial,
2475 struct usb_serial_endpoints *epds)
2476{
2477 struct device *dev = &serial->interface->dev;
2478 unsigned char num_ports = serial->type->num_ports;
2479
2480 /* Make sure we have the required endpoints when in download mode. */
2481 if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
2482 if (epds->num_bulk_in < num_ports ||
2483 epds->num_bulk_out < num_ports ||
2484 epds->num_interrupt_in < 1) {
2485 dev_err(dev, "required endpoints missing\n");
2486 return -ENODEV;
2487 }
2488 }
2489
2490 return num_ports;
2491}
2492
2493static int edge_startup(struct usb_serial *serial)
2494{
2495 struct edgeport_serial *edge_serial;
2496 int status;
2497 u16 product_id;
2498
2499 /* create our private serial structure */
2500 edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
2501 if (!edge_serial)
2502 return -ENOMEM;
2503
2504 mutex_init(&edge_serial->es_lock);
2505 edge_serial->serial = serial;
2506 INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
2507 usb_set_serial_data(serial, edge_serial);
2508
2509 status = download_fw(edge_serial);
2510 if (status < 0) {
2511 kfree(edge_serial);
2512 return status;
2513 }
2514
2515 if (status > 0)
2516 return 1; /* bind but do not register any ports */
2517
2518 product_id = le16_to_cpu(
2519 edge_serial->serial->dev->descriptor.idProduct);
2520
2521 /* Currently only the EP/416 models require heartbeat support */
2522 if (edge_serial->fw_version > FW_HEARTBEAT_VERSION_CUTOFF) {
2523 if (product_id == ION_DEVICE_ID_TI_EDGEPORT_416 ||
2524 product_id == ION_DEVICE_ID_TI_EDGEPORT_416B) {
2525 edge_serial->use_heartbeat = true;
2526 }
2527 }
2528
2529 edge_heartbeat_schedule(edge_serial);
2530
2531 return 0;
2532}
2533
2534static void edge_disconnect(struct usb_serial *serial)
2535{
2536 struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2537
2538 cancel_delayed_work_sync(&edge_serial->heartbeat_work);
2539}
2540
2541static void edge_release(struct usb_serial *serial)
2542{
2543 struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2544
2545 cancel_delayed_work_sync(&edge_serial->heartbeat_work);
2546 kfree(edge_serial);
2547}
2548
2549static int edge_port_probe(struct usb_serial_port *port)
2550{
2551 struct edgeport_port *edge_port;
2552 int ret;
2553
2554 edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
2555 if (!edge_port)
2556 return -ENOMEM;
2557
2558 spin_lock_init(&edge_port->ep_lock);
2559 edge_port->port = port;
2560 edge_port->edge_serial = usb_get_serial_data(port->serial);
2561 edge_port->bUartMode = default_uart_mode;
2562
2563 switch (port->port_number) {
2564 case 0:
2565 edge_port->uart_base = UMPMEM_BASE_UART1;
2566 edge_port->dma_address = UMPD_OEDB1_ADDRESS;
2567 break;
2568 case 1:
2569 edge_port->uart_base = UMPMEM_BASE_UART2;
2570 edge_port->dma_address = UMPD_OEDB2_ADDRESS;
2571 break;
2572 default:
2573 dev_err(&port->dev, "unknown port number\n");
2574 ret = -ENODEV;
2575 goto err;
2576 }
2577
2578 dev_dbg(&port->dev,
2579 "%s - port_number = %d, uart_base = %04x, dma_address = %04x\n",
2580 __func__, port->port_number, edge_port->uart_base,
2581 edge_port->dma_address);
2582
2583 usb_set_serial_port_data(port, edge_port);
2584
2585 ret = edge_create_sysfs_attrs(port);
2586 if (ret)
2587 goto err;
2588
2589 /*
2590 * The LSR does not tell when the transmitter shift register has
2591 * emptied so add a one-character drain delay.
2592 */
2593 port->port.drain_delay = 1;
2594
2595 return 0;
2596err:
2597 kfree(edge_port);
2598
2599 return ret;
2600}
2601
2602static void edge_port_remove(struct usb_serial_port *port)
2603{
2604 struct edgeport_port *edge_port;
2605
2606 edge_port = usb_get_serial_port_data(port);
2607 edge_remove_sysfs_attrs(port);
2608 kfree(edge_port);
2609}
2610
2611/* Sysfs Attributes */
2612
2613static ssize_t uart_mode_show(struct device *dev,
2614 struct device_attribute *attr, char *buf)
2615{
2616 struct usb_serial_port *port = to_usb_serial_port(dev);
2617 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2618
2619 return sprintf(buf, "%d\n", edge_port->bUartMode);
2620}
2621
2622static ssize_t uart_mode_store(struct device *dev,
2623 struct device_attribute *attr, const char *valbuf, size_t count)
2624{
2625 struct usb_serial_port *port = to_usb_serial_port(dev);
2626 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2627 unsigned int v = simple_strtoul(valbuf, NULL, 0);
2628
2629 dev_dbg(dev, "%s: setting uart_mode = %d\n", __func__, v);
2630
2631 if (v < 256)
2632 edge_port->bUartMode = v;
2633 else
2634 dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v);
2635
2636 return count;
2637}
2638static DEVICE_ATTR_RW(uart_mode);
2639
2640static int edge_create_sysfs_attrs(struct usb_serial_port *port)
2641{
2642 return device_create_file(&port->dev, &dev_attr_uart_mode);
2643}
2644
2645static int edge_remove_sysfs_attrs(struct usb_serial_port *port)
2646{
2647 device_remove_file(&port->dev, &dev_attr_uart_mode);
2648 return 0;
2649}
2650
2651#ifdef CONFIG_PM
2652static int edge_suspend(struct usb_serial *serial, pm_message_t message)
2653{
2654 struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2655
2656 cancel_delayed_work_sync(&edge_serial->heartbeat_work);
2657
2658 return 0;
2659}
2660
2661static int edge_resume(struct usb_serial *serial)
2662{
2663 struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2664
2665 edge_heartbeat_schedule(edge_serial);
2666
2667 return 0;
2668}
2669#endif
2670
2671static struct usb_serial_driver edgeport_1port_device = {
2672 .driver = {
2673 .owner = THIS_MODULE,
2674 .name = "edgeport_ti_1",
2675 },
2676 .description = "Edgeport TI 1 port adapter",
2677 .id_table = edgeport_1port_id_table,
2678 .num_ports = 1,
2679 .num_bulk_out = 1,
2680 .open = edge_open,
2681 .close = edge_close,
2682 .throttle = edge_throttle,
2683 .unthrottle = edge_unthrottle,
2684 .attach = edge_startup,
2685 .calc_num_ports = edge_calc_num_ports,
2686 .disconnect = edge_disconnect,
2687 .release = edge_release,
2688 .port_probe = edge_port_probe,
2689 .port_remove = edge_port_remove,
2690 .set_termios = edge_set_termios,
2691 .tiocmget = edge_tiocmget,
2692 .tiocmset = edge_tiocmset,
2693 .tiocmiwait = usb_serial_generic_tiocmiwait,
2694 .get_icount = usb_serial_generic_get_icount,
2695 .write = edge_write,
2696 .write_room = edge_write_room,
2697 .chars_in_buffer = edge_chars_in_buffer,
2698 .tx_empty = edge_tx_empty,
2699 .break_ctl = edge_break,
2700 .read_int_callback = edge_interrupt_callback,
2701 .read_bulk_callback = edge_bulk_in_callback,
2702 .write_bulk_callback = edge_bulk_out_callback,
2703#ifdef CONFIG_PM
2704 .suspend = edge_suspend,
2705 .resume = edge_resume,
2706#endif
2707};
2708
2709static struct usb_serial_driver edgeport_2port_device = {
2710 .driver = {
2711 .owner = THIS_MODULE,
2712 .name = "edgeport_ti_2",
2713 },
2714 .description = "Edgeport TI 2 port adapter",
2715 .id_table = edgeport_2port_id_table,
2716 .num_ports = 2,
2717 .num_bulk_out = 1,
2718 .open = edge_open,
2719 .close = edge_close,
2720 .throttle = edge_throttle,
2721 .unthrottle = edge_unthrottle,
2722 .attach = edge_startup,
2723 .calc_num_ports = edge_calc_num_ports,
2724 .disconnect = edge_disconnect,
2725 .release = edge_release,
2726 .port_probe = edge_port_probe,
2727 .port_remove = edge_port_remove,
2728 .set_termios = edge_set_termios,
2729 .tiocmget = edge_tiocmget,
2730 .tiocmset = edge_tiocmset,
2731 .tiocmiwait = usb_serial_generic_tiocmiwait,
2732 .get_icount = usb_serial_generic_get_icount,
2733 .write = edge_write,
2734 .write_room = edge_write_room,
2735 .chars_in_buffer = edge_chars_in_buffer,
2736 .tx_empty = edge_tx_empty,
2737 .break_ctl = edge_break,
2738 .read_int_callback = edge_interrupt_callback,
2739 .read_bulk_callback = edge_bulk_in_callback,
2740 .write_bulk_callback = edge_bulk_out_callback,
2741#ifdef CONFIG_PM
2742 .suspend = edge_suspend,
2743 .resume = edge_resume,
2744#endif
2745};
2746
2747static struct usb_serial_driver * const serial_drivers[] = {
2748 &edgeport_1port_device, &edgeport_2port_device, NULL
2749};
2750
2751module_usb_serial_driver(serial_drivers, id_table_combined);
2752
2753MODULE_AUTHOR(DRIVER_AUTHOR);
2754MODULE_DESCRIPTION(DRIVER_DESC);
2755MODULE_LICENSE("GPL");
2756MODULE_FIRMWARE("edgeport/down3.bin");
2757
2758module_param(ignore_cpu_rev, bool, 0644);
2759MODULE_PARM_DESC(ignore_cpu_rev,
2760 "Ignore the cpu revision when connecting to a device");
2761
2762module_param(default_uart_mode, int, 0644);
2763MODULE_PARM_DESC(default_uart_mode, "Default uart_mode, 0=RS232, ...");