Loading...
1/*
2 * OHCI HCD (Host Controller Driver) for USB.
3 *
4 * Copyright (C) 2004 SAN People (Pty) Ltd.
5 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
6 *
7 * AT91 Bus Glue
8 *
9 * Based on fragments of 2.4 driver by Rick Bronson.
10 * Based on ohci-omap.c
11 *
12 * This file is licenced under the GPL.
13 */
14
15#include <linux/clk.h>
16#include <linux/platform_device.h>
17
18#include <mach/hardware.h>
19#include <asm/gpio.h>
20
21#include <mach/board.h>
22#include <mach/cpu.h>
23
24#ifndef CONFIG_ARCH_AT91
25#error "CONFIG_ARCH_AT91 must be defined."
26#endif
27
28/* interface and function clocks; sometimes also an AHB clock */
29static struct clk *iclk, *fclk, *hclk;
30static int clocked;
31
32extern int usb_disabled(void);
33
34/*-------------------------------------------------------------------------*/
35
36static void at91_start_clock(void)
37{
38 if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
39 clk_enable(hclk);
40 clk_enable(iclk);
41 clk_enable(fclk);
42 clocked = 1;
43}
44
45static void at91_stop_clock(void)
46{
47 clk_disable(fclk);
48 clk_disable(iclk);
49 if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
50 clk_disable(hclk);
51 clocked = 0;
52}
53
54static void at91_start_hc(struct platform_device *pdev)
55{
56 struct usb_hcd *hcd = platform_get_drvdata(pdev);
57 struct ohci_regs __iomem *regs = hcd->regs;
58
59 dev_dbg(&pdev->dev, "start\n");
60
61 /*
62 * Start the USB clocks.
63 */
64 at91_start_clock();
65
66 /*
67 * The USB host controller must remain in reset.
68 */
69 writel(0, ®s->control);
70}
71
72static void at91_stop_hc(struct platform_device *pdev)
73{
74 struct usb_hcd *hcd = platform_get_drvdata(pdev);
75 struct ohci_regs __iomem *regs = hcd->regs;
76
77 dev_dbg(&pdev->dev, "stop\n");
78
79 /*
80 * Put the USB host controller into reset.
81 */
82 writel(0, ®s->control);
83
84 /*
85 * Stop the USB clocks.
86 */
87 at91_stop_clock();
88}
89
90
91/*-------------------------------------------------------------------------*/
92
93static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
94
95/* configure so an HC device and id are always provided */
96/* always called with process context; sleeping is OK */
97
98
99/**
100 * usb_hcd_at91_probe - initialize AT91-based HCDs
101 * Context: !in_interrupt()
102 *
103 * Allocates basic resources for this USB host controller, and
104 * then invokes the start() method for the HCD associated with it
105 * through the hotplug entry's driver_data.
106 */
107static int usb_hcd_at91_probe(const struct hc_driver *driver,
108 struct platform_device *pdev)
109{
110 int retval;
111 struct usb_hcd *hcd = NULL;
112
113 if (pdev->num_resources != 2) {
114 pr_debug("hcd probe: invalid num_resources");
115 return -ENODEV;
116 }
117
118 if ((pdev->resource[0].flags != IORESOURCE_MEM)
119 || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
120 pr_debug("hcd probe: invalid resource type\n");
121 return -ENODEV;
122 }
123
124 hcd = usb_create_hcd(driver, &pdev->dev, "at91");
125 if (!hcd)
126 return -ENOMEM;
127 hcd->rsrc_start = pdev->resource[0].start;
128 hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
129
130 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
131 pr_debug("request_mem_region failed\n");
132 retval = -EBUSY;
133 goto err1;
134 }
135
136 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
137 if (!hcd->regs) {
138 pr_debug("ioremap failed\n");
139 retval = -EIO;
140 goto err2;
141 }
142
143 iclk = clk_get(&pdev->dev, "ohci_clk");
144 fclk = clk_get(&pdev->dev, "uhpck");
145 if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
146 hclk = clk_get(&pdev->dev, "hck0");
147
148 at91_start_hc(pdev);
149 ohci_hcd_init(hcd_to_ohci(hcd));
150
151 retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
152 if (retval == 0)
153 return retval;
154
155 /* Error handling */
156 at91_stop_hc(pdev);
157
158 if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
159 clk_put(hclk);
160 clk_put(fclk);
161 clk_put(iclk);
162
163 iounmap(hcd->regs);
164
165 err2:
166 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
167
168 err1:
169 usb_put_hcd(hcd);
170 return retval;
171}
172
173
174/* may be called with controller, bus, and devices active */
175
176/**
177 * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
178 * @dev: USB Host Controller being removed
179 * Context: !in_interrupt()
180 *
181 * Reverses the effect of usb_hcd_at91_probe(), first invoking
182 * the HCD's stop() method. It is always called from a thread
183 * context, "rmmod" or something similar.
184 *
185 */
186static void usb_hcd_at91_remove(struct usb_hcd *hcd,
187 struct platform_device *pdev)
188{
189 usb_remove_hcd(hcd);
190 at91_stop_hc(pdev);
191 iounmap(hcd->regs);
192 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
193 usb_put_hcd(hcd);
194
195 if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
196 clk_put(hclk);
197 clk_put(fclk);
198 clk_put(iclk);
199 fclk = iclk = hclk = NULL;
200
201 dev_set_drvdata(&pdev->dev, NULL);
202}
203
204/*-------------------------------------------------------------------------*/
205
206static int __devinit
207ohci_at91_start (struct usb_hcd *hcd)
208{
209 struct at91_usbh_data *board = hcd->self.controller->platform_data;
210 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
211 int ret;
212
213 if ((ret = ohci_init(ohci)) < 0)
214 return ret;
215
216 ohci->num_ports = board->ports;
217
218 if ((ret = ohci_run(ohci)) < 0) {
219 err("can't start %s", hcd->self.bus_name);
220 ohci_stop(hcd);
221 return ret;
222 }
223 return 0;
224}
225
226/*-------------------------------------------------------------------------*/
227
228static const struct hc_driver ohci_at91_hc_driver = {
229 .description = hcd_name,
230 .product_desc = "AT91 OHCI",
231 .hcd_priv_size = sizeof(struct ohci_hcd),
232
233 /*
234 * generic hardware linkage
235 */
236 .irq = ohci_irq,
237 .flags = HCD_USB11 | HCD_MEMORY,
238
239 /*
240 * basic lifecycle operations
241 */
242 .start = ohci_at91_start,
243 .stop = ohci_stop,
244 .shutdown = ohci_shutdown,
245
246 /*
247 * managing i/o requests and associated device resources
248 */
249 .urb_enqueue = ohci_urb_enqueue,
250 .urb_dequeue = ohci_urb_dequeue,
251 .endpoint_disable = ohci_endpoint_disable,
252
253 /*
254 * scheduling support
255 */
256 .get_frame_number = ohci_get_frame,
257
258 /*
259 * root hub support
260 */
261 .hub_status_data = ohci_hub_status_data,
262 .hub_control = ohci_hub_control,
263#ifdef CONFIG_PM
264 .bus_suspend = ohci_bus_suspend,
265 .bus_resume = ohci_bus_resume,
266#endif
267 .start_port_reset = ohci_start_port_reset,
268};
269
270/*-------------------------------------------------------------------------*/
271
272static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
273{
274 struct at91_usbh_data *pdata = pdev->dev.platform_data;
275 int i;
276
277 if (pdata) {
278 /* REVISIT make the driver support per-port power switching,
279 * and also overcurrent detection. Here we assume the ports
280 * are always powered while this driver is active, and use
281 * active-low power switches.
282 */
283 for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
284 if (pdata->vbus_pin[i] <= 0)
285 continue;
286 gpio_request(pdata->vbus_pin[i], "ohci_vbus");
287 gpio_direction_output(pdata->vbus_pin[i], 0);
288 }
289 }
290
291 device_init_wakeup(&pdev->dev, 1);
292 return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
293}
294
295static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
296{
297 struct at91_usbh_data *pdata = pdev->dev.platform_data;
298 int i;
299
300 if (pdata) {
301 for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
302 if (pdata->vbus_pin[i] <= 0)
303 continue;
304 gpio_direction_output(pdata->vbus_pin[i], 1);
305 gpio_free(pdata->vbus_pin[i]);
306 }
307 }
308
309 device_init_wakeup(&pdev->dev, 0);
310 usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
311 return 0;
312}
313
314#ifdef CONFIG_PM
315
316static int
317ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
318{
319 struct usb_hcd *hcd = platform_get_drvdata(pdev);
320 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
321
322 if (device_may_wakeup(&pdev->dev))
323 enable_irq_wake(hcd->irq);
324
325 /*
326 * The integrated transceivers seem unable to notice disconnect,
327 * reconnect, or wakeup without the 48 MHz clock active. so for
328 * correctness, always discard connection state (using reset).
329 *
330 * REVISIT: some boards will be able to turn VBUS off...
331 */
332 if (at91_suspend_entering_slow_clock()) {
333 ohci_usb_reset (ohci);
334 /* flush the writes */
335 (void) ohci_readl (ohci, &ohci->regs->control);
336 at91_stop_clock();
337 }
338
339 return 0;
340}
341
342static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
343{
344 struct usb_hcd *hcd = platform_get_drvdata(pdev);
345
346 if (device_may_wakeup(&pdev->dev))
347 disable_irq_wake(hcd->irq);
348
349 if (!clocked)
350 at91_start_clock();
351
352 ohci_finish_controller_resume(hcd);
353 return 0;
354}
355#else
356#define ohci_hcd_at91_drv_suspend NULL
357#define ohci_hcd_at91_drv_resume NULL
358#endif
359
360MODULE_ALIAS("platform:at91_ohci");
361
362static struct platform_driver ohci_hcd_at91_driver = {
363 .probe = ohci_hcd_at91_drv_probe,
364 .remove = ohci_hcd_at91_drv_remove,
365 .shutdown = usb_hcd_platform_shutdown,
366 .suspend = ohci_hcd_at91_drv_suspend,
367 .resume = ohci_hcd_at91_drv_resume,
368 .driver = {
369 .name = "at91_ohci",
370 .owner = THIS_MODULE,
371 },
372};
1// SPDX-License-Identifier: GPL-1.0+
2/*
3 * OHCI HCD (Host Controller Driver) for USB.
4 *
5 * Copyright (C) 2004 SAN People (Pty) Ltd.
6 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
7 *
8 * AT91 Bus Glue
9 *
10 * Based on fragments of 2.4 driver by Rick Bronson.
11 * Based on ohci-omap.c
12 *
13 * This file is licenced under the GPL.
14 */
15
16#include <linux/arm-smccc.h>
17#include <linux/clk.h>
18#include <linux/dma-mapping.h>
19#include <linux/gpio/consumer.h>
20#include <linux/platform_device.h>
21#include <linux/platform_data/atmel.h>
22#include <linux/io.h>
23#include <linux/kernel.h>
24#include <linux/module.h>
25#include <linux/mfd/syscon.h>
26#include <linux/of.h>
27#include <linux/regmap.h>
28#include <linux/usb.h>
29#include <linux/usb/hcd.h>
30#include <soc/at91/atmel-sfr.h>
31
32#include "ohci.h"
33
34#define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
35#define at91_for_each_port(index) \
36 for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
37
38/* interface, function and usb clocks; sometimes also an AHB clock */
39#define hcd_to_ohci_at91_priv(h) \
40 ((struct ohci_at91_priv *)hcd_to_ohci(h)->priv)
41
42#define AT91_MAX_USBH_PORTS 3
43struct at91_usbh_data {
44 struct gpio_desc *vbus_pin[AT91_MAX_USBH_PORTS];
45 struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
46 u8 ports; /* number of ports on root hub */
47 u8 overcurrent_supported;
48 u8 overcurrent_status[AT91_MAX_USBH_PORTS];
49 u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
50};
51
52struct ohci_at91_priv {
53 struct clk *iclk;
54 struct clk *fclk;
55 struct clk *hclk;
56 bool clocked;
57 bool wakeup; /* Saved wake-up state for resume */
58 struct regmap *sfr_regmap;
59 u32 suspend_smc_id;
60};
61/* interface and function clocks; sometimes also an AHB clock */
62
63#define DRIVER_DESC "OHCI Atmel driver"
64
65static struct hc_driver __read_mostly ohci_at91_hc_driver;
66
67static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = {
68 .extra_priv_size = sizeof(struct ohci_at91_priv),
69};
70
71/*-------------------------------------------------------------------------*/
72
73static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
74{
75 if (ohci_at91->clocked)
76 return;
77
78 clk_set_rate(ohci_at91->fclk, 48000000);
79 clk_prepare_enable(ohci_at91->hclk);
80 clk_prepare_enable(ohci_at91->iclk);
81 clk_prepare_enable(ohci_at91->fclk);
82 ohci_at91->clocked = true;
83}
84
85static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
86{
87 if (!ohci_at91->clocked)
88 return;
89
90 clk_disable_unprepare(ohci_at91->fclk);
91 clk_disable_unprepare(ohci_at91->iclk);
92 clk_disable_unprepare(ohci_at91->hclk);
93 ohci_at91->clocked = false;
94}
95
96static void at91_start_hc(struct platform_device *pdev)
97{
98 struct usb_hcd *hcd = platform_get_drvdata(pdev);
99 struct ohci_regs __iomem *regs = hcd->regs;
100 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
101
102 dev_dbg(&pdev->dev, "start\n");
103
104 /*
105 * Start the USB clocks.
106 */
107 at91_start_clock(ohci_at91);
108
109 /*
110 * The USB host controller must remain in reset.
111 */
112 writel(0, ®s->control);
113}
114
115static void at91_stop_hc(struct platform_device *pdev)
116{
117 struct usb_hcd *hcd = platform_get_drvdata(pdev);
118 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
119
120 dev_dbg(&pdev->dev, "stop\n");
121
122 /*
123 * Put the USB host controller into reset.
124 */
125 usb_hcd_platform_shutdown(pdev);
126
127 /*
128 * Stop the USB clocks.
129 */
130 at91_stop_clock(ohci_at91);
131}
132
133
134/*-------------------------------------------------------------------------*/
135
136static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
137
138static u32 at91_dt_suspend_smc(struct device *dev)
139{
140 u32 suspend_smc_id;
141
142 if (!dev->of_node)
143 return 0;
144
145 if (of_property_read_u32(dev->of_node, "microchip,suspend-smc-id", &suspend_smc_id))
146 return 0;
147
148 return suspend_smc_id;
149}
150
151static struct regmap *at91_dt_syscon_sfr(void)
152{
153 struct regmap *regmap;
154
155 regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
156 if (IS_ERR(regmap)) {
157 regmap = syscon_regmap_lookup_by_compatible("microchip,sam9x60-sfr");
158 if (IS_ERR(regmap))
159 regmap = NULL;
160 }
161
162 return regmap;
163}
164
165/* configure so an HC device and id are always provided */
166/* always called with process context; sleeping is OK */
167
168
169/*
170 * usb_hcd_at91_probe - initialize AT91-based HCDs
171 * @driver: Pointer to hc driver instance
172 * @pdev: USB controller to probe
173 *
174 * Context: task context, might sleep
175 *
176 * Allocates basic resources for this USB host controller, and
177 * then invokes the start() method for the HCD associated with it
178 * through the hotplug entry's driver_data.
179 */
180static int usb_hcd_at91_probe(const struct hc_driver *driver,
181 struct platform_device *pdev)
182{
183 struct at91_usbh_data *board;
184 struct ohci_hcd *ohci;
185 int retval;
186 struct usb_hcd *hcd;
187 struct ohci_at91_priv *ohci_at91;
188 struct device *dev = &pdev->dev;
189 struct resource *res;
190 int irq;
191
192 irq = platform_get_irq(pdev, 0);
193 if (irq < 0)
194 return irq;
195
196 hcd = usb_create_hcd(driver, dev, "at91");
197 if (!hcd)
198 return -ENOMEM;
199 ohci_at91 = hcd_to_ohci_at91_priv(hcd);
200
201 hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
202 if (IS_ERR(hcd->regs)) {
203 retval = PTR_ERR(hcd->regs);
204 goto err;
205 }
206 hcd->rsrc_start = res->start;
207 hcd->rsrc_len = resource_size(res);
208
209 ohci_at91->iclk = devm_clk_get(dev, "ohci_clk");
210 if (IS_ERR(ohci_at91->iclk)) {
211 dev_err(dev, "failed to get ohci_clk\n");
212 retval = PTR_ERR(ohci_at91->iclk);
213 goto err;
214 }
215 ohci_at91->fclk = devm_clk_get(dev, "uhpck");
216 if (IS_ERR(ohci_at91->fclk)) {
217 dev_err(dev, "failed to get uhpck\n");
218 retval = PTR_ERR(ohci_at91->fclk);
219 goto err;
220 }
221 ohci_at91->hclk = devm_clk_get(dev, "hclk");
222 if (IS_ERR(ohci_at91->hclk)) {
223 dev_err(dev, "failed to get hclk\n");
224 retval = PTR_ERR(ohci_at91->hclk);
225 goto err;
226 }
227
228 ohci_at91->suspend_smc_id = at91_dt_suspend_smc(dev);
229 if (!ohci_at91->suspend_smc_id) {
230 dev_dbg(dev, "failed to find sfr suspend smc id, using regmap\n");
231 ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
232 if (!ohci_at91->sfr_regmap)
233 dev_dbg(dev, "failed to find sfr node\n");
234 }
235
236 board = hcd->self.controller->platform_data;
237 ohci = hcd_to_ohci(hcd);
238 ohci->num_ports = board->ports;
239 at91_start_hc(pdev);
240
241 /*
242 * The RemoteWakeupConnected bit has to be set explicitly
243 * before calling ohci_run. The reset value of this bit is 0.
244 */
245 ohci->hc_control = OHCI_CTRL_RWC;
246
247 retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
248 if (retval == 0) {
249 device_wakeup_enable(hcd->self.controller);
250 return retval;
251 }
252
253 /* Error handling */
254 at91_stop_hc(pdev);
255
256 err:
257 usb_put_hcd(hcd);
258 return retval;
259}
260
261
262/* may be called with controller, bus, and devices active */
263
264/*
265 * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
266 * @hcd: USB controller to remove
267 * @pdev: Platform device required for cleanup
268 *
269 * Context: task context, might sleep
270 *
271 * Reverses the effect of usb_hcd_at91_probe(), first invoking
272 * the HCD's stop() method. It is always called from a thread
273 * context, "rmmod" or something similar.
274 */
275static void usb_hcd_at91_remove(struct usb_hcd *hcd,
276 struct platform_device *pdev)
277{
278 usb_remove_hcd(hcd);
279 at91_stop_hc(pdev);
280 usb_put_hcd(hcd);
281}
282
283/*-------------------------------------------------------------------------*/
284static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
285{
286 if (!valid_port(port))
287 return;
288
289 gpiod_set_value(pdata->vbus_pin[port], enable);
290}
291
292static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
293{
294 if (!valid_port(port))
295 return -EINVAL;
296
297 return gpiod_get_value(pdata->vbus_pin[port]);
298}
299
300/*
301 * Update the status data from the hub with the over-current indicator change.
302 */
303static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
304{
305 struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
306 int length = ohci_hub_status_data(hcd, buf);
307 int port;
308
309 at91_for_each_port(port) {
310 if (pdata->overcurrent_changed[port]) {
311 if (!length)
312 length = 1;
313 buf[0] |= 1 << (port + 1);
314 }
315 }
316
317 return length;
318}
319
320static int ohci_at91_port_suspend(struct ohci_at91_priv *ohci_at91, u8 set)
321{
322 struct regmap *regmap = ohci_at91->sfr_regmap;
323 u32 regval;
324 int ret;
325
326 if (ohci_at91->suspend_smc_id) {
327 struct arm_smccc_res res;
328
329 arm_smccc_smc(ohci_at91->suspend_smc_id, set, 0, 0, 0, 0, 0, 0, &res);
330 if (res.a0)
331 return -EINVAL;
332 } else if (regmap) {
333 ret = regmap_read(regmap, AT91_SFR_OHCIICR, ®val);
334 if (ret)
335 return ret;
336
337 if (set)
338 regval |= AT91_OHCIICR_USB_SUSPEND;
339 else
340 regval &= ~AT91_OHCIICR_USB_SUSPEND;
341
342 regmap_write(regmap, AT91_SFR_OHCIICR, regval);
343 }
344
345 return 0;
346}
347
348/*
349 * Look at the control requests to the root hub and see if we need to override.
350 */
351static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
352 u16 wIndex, char *buf, u16 wLength)
353{
354 struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
355 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
356 struct usb_hub_descriptor *desc;
357 int ret = -EINVAL;
358 u32 *data = (u32 *)buf;
359
360 dev_dbg(hcd->self.controller,
361 "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
362 hcd, typeReq, wValue, wIndex, buf, wLength);
363
364 wIndex--;
365
366 switch (typeReq) {
367 case SetPortFeature:
368 switch (wValue) {
369 case USB_PORT_FEAT_POWER:
370 dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
371 if (valid_port(wIndex)) {
372 ohci_at91_usb_set_power(pdata, wIndex, 1);
373 ret = 0;
374 }
375
376 goto out;
377
378 case USB_PORT_FEAT_SUSPEND:
379 dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n");
380 if (valid_port(wIndex)) {
381 ohci_at91_port_suspend(ohci_at91, 1);
382 return 0;
383 }
384 break;
385 }
386 break;
387
388 case ClearPortFeature:
389 switch (wValue) {
390 case USB_PORT_FEAT_C_OVER_CURRENT:
391 dev_dbg(hcd->self.controller,
392 "ClearPortFeature: C_OVER_CURRENT\n");
393
394 if (valid_port(wIndex)) {
395 pdata->overcurrent_changed[wIndex] = 0;
396 pdata->overcurrent_status[wIndex] = 0;
397 }
398
399 goto out;
400
401 case USB_PORT_FEAT_OVER_CURRENT:
402 dev_dbg(hcd->self.controller,
403 "ClearPortFeature: OVER_CURRENT\n");
404
405 if (valid_port(wIndex))
406 pdata->overcurrent_status[wIndex] = 0;
407
408 goto out;
409
410 case USB_PORT_FEAT_POWER:
411 dev_dbg(hcd->self.controller,
412 "ClearPortFeature: POWER\n");
413
414 if (valid_port(wIndex)) {
415 ohci_at91_usb_set_power(pdata, wIndex, 0);
416 return 0;
417 }
418 break;
419
420 case USB_PORT_FEAT_SUSPEND:
421 dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n");
422 if (valid_port(wIndex)) {
423 ohci_at91_port_suspend(ohci_at91, 0);
424 return 0;
425 }
426 break;
427 }
428 break;
429 }
430
431 ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
432 if (ret)
433 goto out;
434
435 switch (typeReq) {
436 case GetHubDescriptor:
437
438 /* update the hub's descriptor */
439
440 desc = (struct usb_hub_descriptor *)buf;
441
442 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
443 desc->wHubCharacteristics);
444
445 /* remove the old configurations for power-switching, and
446 * over-current protection, and insert our new configuration
447 */
448
449 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
450 desc->wHubCharacteristics |=
451 cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM);
452
453 if (pdata->overcurrent_supported) {
454 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
455 desc->wHubCharacteristics |=
456 cpu_to_le16(HUB_CHAR_INDV_PORT_OCPM);
457 }
458
459 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
460 desc->wHubCharacteristics);
461
462 return ret;
463
464 case GetPortStatus:
465 /* check port status */
466
467 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
468
469 if (valid_port(wIndex)) {
470 if (!ohci_at91_usb_get_power(pdata, wIndex))
471 *data &= ~cpu_to_le32(RH_PS_PPS);
472
473 if (pdata->overcurrent_changed[wIndex])
474 *data |= cpu_to_le32(RH_PS_OCIC);
475
476 if (pdata->overcurrent_status[wIndex])
477 *data |= cpu_to_le32(RH_PS_POCI);
478 }
479 }
480
481 out:
482 return ret;
483}
484
485/*-------------------------------------------------------------------------*/
486
487static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
488{
489 struct platform_device *pdev = data;
490 struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
491 int val, port;
492
493 /* From the GPIO notifying the over-current situation, find
494 * out the corresponding port */
495 at91_for_each_port(port) {
496 if (gpiod_to_irq(pdata->overcurrent_pin[port]) == irq)
497 break;
498 }
499
500 if (port == AT91_MAX_USBH_PORTS) {
501 dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
502 return IRQ_HANDLED;
503 }
504
505 val = gpiod_get_value(pdata->overcurrent_pin[port]);
506
507 /* When notified of an over-current situation, disable power
508 on the corresponding port, and mark this port in
509 over-current. */
510 if (!val) {
511 ohci_at91_usb_set_power(pdata, port, 0);
512 pdata->overcurrent_status[port] = 1;
513 pdata->overcurrent_changed[port] = 1;
514 }
515
516 dev_dbg(& pdev->dev, "overcurrent situation %s\n",
517 val ? "exited" : "notified");
518
519 return IRQ_HANDLED;
520}
521
522static const struct of_device_id at91_ohci_dt_ids[] = {
523 { .compatible = "atmel,at91rm9200-ohci" },
524 { /* sentinel */ }
525};
526
527MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
528
529/*-------------------------------------------------------------------------*/
530
531static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
532{
533 struct device_node *np = pdev->dev.of_node;
534 struct at91_usbh_data *pdata;
535 int i;
536 int ret;
537 int err;
538 u32 ports;
539
540 /* Right now device-tree probed devices don't get dma_mask set.
541 * Since shared usb code relies on it, set it here for now.
542 * Once we have dma capability bindings this can go away.
543 */
544 ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
545 if (ret)
546 return ret;
547
548 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
549 if (!pdata)
550 return -ENOMEM;
551
552 pdev->dev.platform_data = pdata;
553
554 if (!of_property_read_u32(np, "num-ports", &ports))
555 pdata->ports = ports;
556
557 at91_for_each_port(i) {
558 if (i >= pdata->ports)
559 break;
560
561 pdata->vbus_pin[i] =
562 devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
563 i, GPIOD_OUT_HIGH);
564 if (IS_ERR(pdata->vbus_pin[i])) {
565 err = PTR_ERR(pdata->vbus_pin[i]);
566 dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
567 continue;
568 }
569 }
570
571 at91_for_each_port(i) {
572 if (i >= pdata->ports)
573 break;
574
575 pdata->overcurrent_pin[i] =
576 devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
577 i, GPIOD_IN);
578 if (!pdata->overcurrent_pin[i])
579 continue;
580 if (IS_ERR(pdata->overcurrent_pin[i])) {
581 err = PTR_ERR(pdata->overcurrent_pin[i]);
582 dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
583 continue;
584 }
585
586 ret = devm_request_irq(&pdev->dev,
587 gpiod_to_irq(pdata->overcurrent_pin[i]),
588 ohci_hcd_at91_overcurrent_irq,
589 IRQF_SHARED,
590 "ohci_overcurrent", pdev);
591 if (ret)
592 dev_info(&pdev->dev, "failed to request gpio \"overcurrent\" IRQ\n");
593 }
594
595 device_init_wakeup(&pdev->dev, 1);
596 return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
597}
598
599static void ohci_hcd_at91_drv_remove(struct platform_device *pdev)
600{
601 struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
602 int i;
603
604 if (pdata) {
605 at91_for_each_port(i)
606 ohci_at91_usb_set_power(pdata, i, 0);
607 }
608
609 device_init_wakeup(&pdev->dev, 0);
610 usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
611}
612
613static int __maybe_unused
614ohci_hcd_at91_drv_suspend(struct device *dev)
615{
616 struct usb_hcd *hcd = dev_get_drvdata(dev);
617 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
618 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
619 int ret;
620
621 /*
622 * Disable wakeup if we are going to sleep with slow clock mode
623 * enabled.
624 */
625 ohci_at91->wakeup = device_may_wakeup(dev)
626 && !at91_suspend_entering_slow_clock();
627
628 if (ohci_at91->wakeup)
629 enable_irq_wake(hcd->irq);
630
631 ret = ohci_suspend(hcd, ohci_at91->wakeup);
632 if (ret) {
633 if (ohci_at91->wakeup)
634 disable_irq_wake(hcd->irq);
635 return ret;
636 }
637 /*
638 * The integrated transceivers seem unable to notice disconnect,
639 * reconnect, or wakeup without the 48 MHz clock active. so for
640 * correctness, always discard connection state (using reset).
641 *
642 * REVISIT: some boards will be able to turn VBUS off...
643 */
644 if (!ohci_at91->wakeup) {
645 ohci->rh_state = OHCI_RH_HALTED;
646
647 /* flush the writes */
648 (void) ohci_readl (ohci, &ohci->regs->control);
649 msleep(1);
650 ohci_at91_port_suspend(ohci_at91, 1);
651 at91_stop_clock(ohci_at91);
652 } else {
653 ohci_at91_port_suspend(ohci_at91, 1);
654 }
655
656 return ret;
657}
658
659static int __maybe_unused
660ohci_hcd_at91_drv_resume(struct device *dev)
661{
662 struct usb_hcd *hcd = dev_get_drvdata(dev);
663 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
664
665 ohci_at91_port_suspend(ohci_at91, 0);
666
667 if (ohci_at91->wakeup)
668 disable_irq_wake(hcd->irq);
669 else
670 at91_start_clock(ohci_at91);
671
672 /*
673 * According to the comment in ohci_hcd_at91_drv_suspend()
674 * we need to do a reset if the 48Mhz clock was stopped,
675 * that is, if ohci_at91->wakeup is clear. Tell ohci_resume()
676 * to reset in this case by setting its "hibernated" flag.
677 */
678 ohci_resume(hcd, !ohci_at91->wakeup);
679
680 return 0;
681}
682
683static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend,
684 ohci_hcd_at91_drv_resume);
685
686static struct platform_driver ohci_hcd_at91_driver = {
687 .probe = ohci_hcd_at91_drv_probe,
688 .remove_new = ohci_hcd_at91_drv_remove,
689 .shutdown = usb_hcd_platform_shutdown,
690 .driver = {
691 .name = "at91_ohci",
692 .pm = &ohci_hcd_at91_pm_ops,
693 .of_match_table = at91_ohci_dt_ids,
694 },
695};
696
697static int __init ohci_at91_init(void)
698{
699 if (usb_disabled())
700 return -ENODEV;
701
702 ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides);
703
704 /*
705 * The Atmel HW has some unusual quirks, which require Atmel-specific
706 * workarounds. We override certain hc_driver functions here to
707 * achieve that. We explicitly do not enhance ohci_driver_overrides to
708 * allow this more easily, since this is an unusual case, and we don't
709 * want to encourage others to override these functions by making it
710 * too easy.
711 */
712
713 ohci_at91_hc_driver.hub_status_data = ohci_at91_hub_status_data;
714 ohci_at91_hc_driver.hub_control = ohci_at91_hub_control;
715
716 return platform_driver_register(&ohci_hcd_at91_driver);
717}
718module_init(ohci_at91_init);
719
720static void __exit ohci_at91_cleanup(void)
721{
722 platform_driver_unregister(&ohci_hcd_at91_driver);
723}
724module_exit(ohci_at91_cleanup);
725
726MODULE_DESCRIPTION(DRIVER_DESC);
727MODULE_LICENSE("GPL");
728MODULE_ALIAS("platform:at91_ohci");