Loading...
Note: File does not exist in v6.8.
1/*
2 * f_ecm.c -- USB CDC Ethernet (ECM) link function driver
3 *
4 * Copyright (C) 2003-2005,2008 David Brownell
5 * Copyright (C) 2008 Nokia Corporation
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22/* #define VERBOSE_DEBUG */
23
24#include <linux/slab.h>
25#include <linux/kernel.h>
26#include <linux/device.h>
27#include <linux/etherdevice.h>
28
29#include "u_ether.h"
30
31
32/*
33 * This function is a "CDC Ethernet Networking Control Model" (CDC ECM)
34 * Ethernet link. The data transfer model is simple (packets sent and
35 * received over bulk endpoints using normal short packet termination),
36 * and the control model exposes various data and optional notifications.
37 *
38 * ECM is well standardized and (except for Microsoft) supported by most
39 * operating systems with USB host support. It's the preferred interop
40 * solution for Ethernet over USB, at least for firmware based solutions.
41 * (Hardware solutions tend to be more minimalist.) A newer and simpler
42 * "Ethernet Emulation Model" (CDC EEM) hasn't yet caught on.
43 *
44 * Note that ECM requires the use of "alternate settings" for its data
45 * interface. This means that the set_alt() method has real work to do,
46 * and also means that a get_alt() method is required.
47 */
48
49
50enum ecm_notify_state {
51 ECM_NOTIFY_NONE, /* don't notify */
52 ECM_NOTIFY_CONNECT, /* issue CONNECT next */
53 ECM_NOTIFY_SPEED, /* issue SPEED_CHANGE next */
54};
55
56struct f_ecm {
57 struct gether port;
58 u8 ctrl_id, data_id;
59
60 char ethaddr[14];
61
62 struct usb_ep *notify;
63 struct usb_request *notify_req;
64 u8 notify_state;
65 bool is_open;
66
67 /* FIXME is_open needs some irq-ish locking
68 * ... possibly the same as port.ioport
69 */
70};
71
72static inline struct f_ecm *func_to_ecm(struct usb_function *f)
73{
74 return container_of(f, struct f_ecm, port.func);
75}
76
77/* peak (theoretical) bulk transfer rate in bits-per-second */
78static inline unsigned ecm_bitrate(struct usb_gadget *g)
79{
80 if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
81 return 13 * 1024 * 8 * 1000 * 8;
82 else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
83 return 13 * 512 * 8 * 1000 * 8;
84 else
85 return 19 * 64 * 1 * 1000 * 8;
86}
87
88/*-------------------------------------------------------------------------*/
89
90/*
91 * Include the status endpoint if we can, even though it's optional.
92 *
93 * Use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
94 * packet, to simplify cancellation; and a big transfer interval, to
95 * waste less bandwidth.
96 *
97 * Some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
98 * if they ignore the connect/disconnect notifications that real aether
99 * can provide. More advanced cdc configurations might want to support
100 * encapsulated commands (vendor-specific, using control-OUT).
101 */
102
103#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
104#define ECM_STATUS_BYTECOUNT 16 /* 8 byte header + data */
105
106
107/* interface descriptor: */
108
109static struct usb_interface_descriptor ecm_control_intf = {
110 .bLength = sizeof ecm_control_intf,
111 .bDescriptorType = USB_DT_INTERFACE,
112
113 /* .bInterfaceNumber = DYNAMIC */
114 /* status endpoint is optional; this could be patched later */
115 .bNumEndpoints = 1,
116 .bInterfaceClass = USB_CLASS_COMM,
117 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
118 .bInterfaceProtocol = USB_CDC_PROTO_NONE,
119 /* .iInterface = DYNAMIC */
120};
121
122static struct usb_cdc_header_desc ecm_header_desc = {
123 .bLength = sizeof ecm_header_desc,
124 .bDescriptorType = USB_DT_CS_INTERFACE,
125 .bDescriptorSubType = USB_CDC_HEADER_TYPE,
126
127 .bcdCDC = cpu_to_le16(0x0110),
128};
129
130static struct usb_cdc_union_desc ecm_union_desc = {
131 .bLength = sizeof(ecm_union_desc),
132 .bDescriptorType = USB_DT_CS_INTERFACE,
133 .bDescriptorSubType = USB_CDC_UNION_TYPE,
134 /* .bMasterInterface0 = DYNAMIC */
135 /* .bSlaveInterface0 = DYNAMIC */
136};
137
138static struct usb_cdc_ether_desc ecm_desc = {
139 .bLength = sizeof ecm_desc,
140 .bDescriptorType = USB_DT_CS_INTERFACE,
141 .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
142
143 /* this descriptor actually adds value, surprise! */
144 /* .iMACAddress = DYNAMIC */
145 .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */
146 .wMaxSegmentSize = cpu_to_le16(ETH_FRAME_LEN),
147 .wNumberMCFilters = cpu_to_le16(0),
148 .bNumberPowerFilters = 0,
149};
150
151/* the default data interface has no endpoints ... */
152
153static struct usb_interface_descriptor ecm_data_nop_intf = {
154 .bLength = sizeof ecm_data_nop_intf,
155 .bDescriptorType = USB_DT_INTERFACE,
156
157 .bInterfaceNumber = 1,
158 .bAlternateSetting = 0,
159 .bNumEndpoints = 0,
160 .bInterfaceClass = USB_CLASS_CDC_DATA,
161 .bInterfaceSubClass = 0,
162 .bInterfaceProtocol = 0,
163 /* .iInterface = DYNAMIC */
164};
165
166/* ... but the "real" data interface has two bulk endpoints */
167
168static struct usb_interface_descriptor ecm_data_intf = {
169 .bLength = sizeof ecm_data_intf,
170 .bDescriptorType = USB_DT_INTERFACE,
171
172 .bInterfaceNumber = 1,
173 .bAlternateSetting = 1,
174 .bNumEndpoints = 2,
175 .bInterfaceClass = USB_CLASS_CDC_DATA,
176 .bInterfaceSubClass = 0,
177 .bInterfaceProtocol = 0,
178 /* .iInterface = DYNAMIC */
179};
180
181/* full speed support: */
182
183static struct usb_endpoint_descriptor fs_ecm_notify_desc = {
184 .bLength = USB_DT_ENDPOINT_SIZE,
185 .bDescriptorType = USB_DT_ENDPOINT,
186
187 .bEndpointAddress = USB_DIR_IN,
188 .bmAttributes = USB_ENDPOINT_XFER_INT,
189 .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT),
190 .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
191};
192
193static struct usb_endpoint_descriptor fs_ecm_in_desc = {
194 .bLength = USB_DT_ENDPOINT_SIZE,
195 .bDescriptorType = USB_DT_ENDPOINT,
196
197 .bEndpointAddress = USB_DIR_IN,
198 .bmAttributes = USB_ENDPOINT_XFER_BULK,
199};
200
201static struct usb_endpoint_descriptor fs_ecm_out_desc = {
202 .bLength = USB_DT_ENDPOINT_SIZE,
203 .bDescriptorType = USB_DT_ENDPOINT,
204
205 .bEndpointAddress = USB_DIR_OUT,
206 .bmAttributes = USB_ENDPOINT_XFER_BULK,
207};
208
209static struct usb_descriptor_header *ecm_fs_function[] = {
210 /* CDC ECM control descriptors */
211 (struct usb_descriptor_header *) &ecm_control_intf,
212 (struct usb_descriptor_header *) &ecm_header_desc,
213 (struct usb_descriptor_header *) &ecm_union_desc,
214 (struct usb_descriptor_header *) &ecm_desc,
215
216 /* NOTE: status endpoint might need to be removed */
217 (struct usb_descriptor_header *) &fs_ecm_notify_desc,
218
219 /* data interface, altsettings 0 and 1 */
220 (struct usb_descriptor_header *) &ecm_data_nop_intf,
221 (struct usb_descriptor_header *) &ecm_data_intf,
222 (struct usb_descriptor_header *) &fs_ecm_in_desc,
223 (struct usb_descriptor_header *) &fs_ecm_out_desc,
224 NULL,
225};
226
227/* high speed support: */
228
229static struct usb_endpoint_descriptor hs_ecm_notify_desc = {
230 .bLength = USB_DT_ENDPOINT_SIZE,
231 .bDescriptorType = USB_DT_ENDPOINT,
232
233 .bEndpointAddress = USB_DIR_IN,
234 .bmAttributes = USB_ENDPOINT_XFER_INT,
235 .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT),
236 .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
237};
238
239static struct usb_endpoint_descriptor hs_ecm_in_desc = {
240 .bLength = USB_DT_ENDPOINT_SIZE,
241 .bDescriptorType = USB_DT_ENDPOINT,
242
243 .bEndpointAddress = USB_DIR_IN,
244 .bmAttributes = USB_ENDPOINT_XFER_BULK,
245 .wMaxPacketSize = cpu_to_le16(512),
246};
247
248static struct usb_endpoint_descriptor hs_ecm_out_desc = {
249 .bLength = USB_DT_ENDPOINT_SIZE,
250 .bDescriptorType = USB_DT_ENDPOINT,
251
252 .bEndpointAddress = USB_DIR_OUT,
253 .bmAttributes = USB_ENDPOINT_XFER_BULK,
254 .wMaxPacketSize = cpu_to_le16(512),
255};
256
257static struct usb_descriptor_header *ecm_hs_function[] = {
258 /* CDC ECM control descriptors */
259 (struct usb_descriptor_header *) &ecm_control_intf,
260 (struct usb_descriptor_header *) &ecm_header_desc,
261 (struct usb_descriptor_header *) &ecm_union_desc,
262 (struct usb_descriptor_header *) &ecm_desc,
263
264 /* NOTE: status endpoint might need to be removed */
265 (struct usb_descriptor_header *) &hs_ecm_notify_desc,
266
267 /* data interface, altsettings 0 and 1 */
268 (struct usb_descriptor_header *) &ecm_data_nop_intf,
269 (struct usb_descriptor_header *) &ecm_data_intf,
270 (struct usb_descriptor_header *) &hs_ecm_in_desc,
271 (struct usb_descriptor_header *) &hs_ecm_out_desc,
272 NULL,
273};
274
275/* super speed support: */
276
277static struct usb_endpoint_descriptor ss_ecm_notify_desc = {
278 .bLength = USB_DT_ENDPOINT_SIZE,
279 .bDescriptorType = USB_DT_ENDPOINT,
280
281 .bEndpointAddress = USB_DIR_IN,
282 .bmAttributes = USB_ENDPOINT_XFER_INT,
283 .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT),
284 .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
285};
286
287static struct usb_ss_ep_comp_descriptor ss_ecm_intr_comp_desc = {
288 .bLength = sizeof ss_ecm_intr_comp_desc,
289 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
290
291 /* the following 3 values can be tweaked if necessary */
292 /* .bMaxBurst = 0, */
293 /* .bmAttributes = 0, */
294 .wBytesPerInterval = cpu_to_le16(ECM_STATUS_BYTECOUNT),
295};
296
297static struct usb_endpoint_descriptor ss_ecm_in_desc = {
298 .bLength = USB_DT_ENDPOINT_SIZE,
299 .bDescriptorType = USB_DT_ENDPOINT,
300
301 .bEndpointAddress = USB_DIR_IN,
302 .bmAttributes = USB_ENDPOINT_XFER_BULK,
303 .wMaxPacketSize = cpu_to_le16(1024),
304};
305
306static struct usb_endpoint_descriptor ss_ecm_out_desc = {
307 .bLength = USB_DT_ENDPOINT_SIZE,
308 .bDescriptorType = USB_DT_ENDPOINT,
309
310 .bEndpointAddress = USB_DIR_OUT,
311 .bmAttributes = USB_ENDPOINT_XFER_BULK,
312 .wMaxPacketSize = cpu_to_le16(1024),
313};
314
315static struct usb_ss_ep_comp_descriptor ss_ecm_bulk_comp_desc = {
316 .bLength = sizeof ss_ecm_bulk_comp_desc,
317 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
318
319 /* the following 2 values can be tweaked if necessary */
320 /* .bMaxBurst = 0, */
321 /* .bmAttributes = 0, */
322};
323
324static struct usb_descriptor_header *ecm_ss_function[] = {
325 /* CDC ECM control descriptors */
326 (struct usb_descriptor_header *) &ecm_control_intf,
327 (struct usb_descriptor_header *) &ecm_header_desc,
328 (struct usb_descriptor_header *) &ecm_union_desc,
329 (struct usb_descriptor_header *) &ecm_desc,
330
331 /* NOTE: status endpoint might need to be removed */
332 (struct usb_descriptor_header *) &ss_ecm_notify_desc,
333 (struct usb_descriptor_header *) &ss_ecm_intr_comp_desc,
334
335 /* data interface, altsettings 0 and 1 */
336 (struct usb_descriptor_header *) &ecm_data_nop_intf,
337 (struct usb_descriptor_header *) &ecm_data_intf,
338 (struct usb_descriptor_header *) &ss_ecm_in_desc,
339 (struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc,
340 (struct usb_descriptor_header *) &ss_ecm_out_desc,
341 (struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc,
342 NULL,
343};
344
345/* string descriptors: */
346
347static struct usb_string ecm_string_defs[] = {
348 [0].s = "CDC Ethernet Control Model (ECM)",
349 [1].s = NULL /* DYNAMIC */,
350 [2].s = "CDC Ethernet Data",
351 { } /* end of list */
352};
353
354static struct usb_gadget_strings ecm_string_table = {
355 .language = 0x0409, /* en-us */
356 .strings = ecm_string_defs,
357};
358
359static struct usb_gadget_strings *ecm_strings[] = {
360 &ecm_string_table,
361 NULL,
362};
363
364/*-------------------------------------------------------------------------*/
365
366static void ecm_do_notify(struct f_ecm *ecm)
367{
368 struct usb_request *req = ecm->notify_req;
369 struct usb_cdc_notification *event;
370 struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
371 __le32 *data;
372 int status;
373
374 /* notification already in flight? */
375 if (!req)
376 return;
377
378 event = req->buf;
379 switch (ecm->notify_state) {
380 case ECM_NOTIFY_NONE:
381 return;
382
383 case ECM_NOTIFY_CONNECT:
384 event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
385 if (ecm->is_open)
386 event->wValue = cpu_to_le16(1);
387 else
388 event->wValue = cpu_to_le16(0);
389 event->wLength = 0;
390 req->length = sizeof *event;
391
392 DBG(cdev, "notify connect %s\n",
393 ecm->is_open ? "true" : "false");
394 ecm->notify_state = ECM_NOTIFY_SPEED;
395 break;
396
397 case ECM_NOTIFY_SPEED:
398 event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
399 event->wValue = cpu_to_le16(0);
400 event->wLength = cpu_to_le16(8);
401 req->length = ECM_STATUS_BYTECOUNT;
402
403 /* SPEED_CHANGE data is up/down speeds in bits/sec */
404 data = req->buf + sizeof *event;
405 data[0] = cpu_to_le32(ecm_bitrate(cdev->gadget));
406 data[1] = data[0];
407
408 DBG(cdev, "notify speed %d\n", ecm_bitrate(cdev->gadget));
409 ecm->notify_state = ECM_NOTIFY_NONE;
410 break;
411 }
412 event->bmRequestType = 0xA1;
413 event->wIndex = cpu_to_le16(ecm->ctrl_id);
414
415 ecm->notify_req = NULL;
416 status = usb_ep_queue(ecm->notify, req, GFP_ATOMIC);
417 if (status < 0) {
418 ecm->notify_req = req;
419 DBG(cdev, "notify --> %d\n", status);
420 }
421}
422
423static void ecm_notify(struct f_ecm *ecm)
424{
425 /* NOTE on most versions of Linux, host side cdc-ethernet
426 * won't listen for notifications until its netdevice opens.
427 * The first notification then sits in the FIFO for a long
428 * time, and the second one is queued.
429 */
430 ecm->notify_state = ECM_NOTIFY_CONNECT;
431 ecm_do_notify(ecm);
432}
433
434static void ecm_notify_complete(struct usb_ep *ep, struct usb_request *req)
435{
436 struct f_ecm *ecm = req->context;
437 struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
438 struct usb_cdc_notification *event = req->buf;
439
440 switch (req->status) {
441 case 0:
442 /* no fault */
443 break;
444 case -ECONNRESET:
445 case -ESHUTDOWN:
446 ecm->notify_state = ECM_NOTIFY_NONE;
447 break;
448 default:
449 DBG(cdev, "event %02x --> %d\n",
450 event->bNotificationType, req->status);
451 break;
452 }
453 ecm->notify_req = req;
454 ecm_do_notify(ecm);
455}
456
457static int ecm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
458{
459 struct f_ecm *ecm = func_to_ecm(f);
460 struct usb_composite_dev *cdev = f->config->cdev;
461 struct usb_request *req = cdev->req;
462 int value = -EOPNOTSUPP;
463 u16 w_index = le16_to_cpu(ctrl->wIndex);
464 u16 w_value = le16_to_cpu(ctrl->wValue);
465 u16 w_length = le16_to_cpu(ctrl->wLength);
466
467 /* composite driver infrastructure handles everything except
468 * CDC class messages; interface activation uses set_alt().
469 */
470 switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
471 case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
472 | USB_CDC_SET_ETHERNET_PACKET_FILTER:
473 /* see 6.2.30: no data, wIndex = interface,
474 * wValue = packet filter bitmap
475 */
476 if (w_length != 0 || w_index != ecm->ctrl_id)
477 goto invalid;
478 DBG(cdev, "packet filter %02x\n", w_value);
479 /* REVISIT locking of cdc_filter. This assumes the UDC
480 * driver won't have a concurrent packet TX irq running on
481 * another CPU; or that if it does, this write is atomic...
482 */
483 ecm->port.cdc_filter = w_value;
484 value = 0;
485 break;
486
487 /* and optionally:
488 * case USB_CDC_SEND_ENCAPSULATED_COMMAND:
489 * case USB_CDC_GET_ENCAPSULATED_RESPONSE:
490 * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
491 * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
492 * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
493 * case USB_CDC_GET_ETHERNET_STATISTIC:
494 */
495
496 default:
497invalid:
498 DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
499 ctrl->bRequestType, ctrl->bRequest,
500 w_value, w_index, w_length);
501 }
502
503 /* respond with data transfer or status phase? */
504 if (value >= 0) {
505 DBG(cdev, "ecm req%02x.%02x v%04x i%04x l%d\n",
506 ctrl->bRequestType, ctrl->bRequest,
507 w_value, w_index, w_length);
508 req->zero = 0;
509 req->length = value;
510 value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
511 if (value < 0)
512 ERROR(cdev, "ecm req %02x.%02x response err %d\n",
513 ctrl->bRequestType, ctrl->bRequest,
514 value);
515 }
516
517 /* device either stalls (value < 0) or reports success */
518 return value;
519}
520
521
522static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
523{
524 struct f_ecm *ecm = func_to_ecm(f);
525 struct usb_composite_dev *cdev = f->config->cdev;
526
527 /* Control interface has only altsetting 0 */
528 if (intf == ecm->ctrl_id) {
529 if (alt != 0)
530 goto fail;
531
532 if (ecm->notify->driver_data) {
533 VDBG(cdev, "reset ecm control %d\n", intf);
534 usb_ep_disable(ecm->notify);
535 }
536 if (!(ecm->notify->desc)) {
537 VDBG(cdev, "init ecm ctrl %d\n", intf);
538 if (config_ep_by_speed(cdev->gadget, f, ecm->notify))
539 goto fail;
540 }
541 usb_ep_enable(ecm->notify);
542 ecm->notify->driver_data = ecm;
543
544 /* Data interface has two altsettings, 0 and 1 */
545 } else if (intf == ecm->data_id) {
546 if (alt > 1)
547 goto fail;
548
549 if (ecm->port.in_ep->driver_data) {
550 DBG(cdev, "reset ecm\n");
551 gether_disconnect(&ecm->port);
552 }
553
554 if (!ecm->port.in_ep->desc ||
555 !ecm->port.out_ep->desc) {
556 DBG(cdev, "init ecm\n");
557 if (config_ep_by_speed(cdev->gadget, f,
558 ecm->port.in_ep) ||
559 config_ep_by_speed(cdev->gadget, f,
560 ecm->port.out_ep)) {
561 ecm->port.in_ep->desc = NULL;
562 ecm->port.out_ep->desc = NULL;
563 goto fail;
564 }
565 }
566
567 /* CDC Ethernet only sends data in non-default altsettings.
568 * Changing altsettings resets filters, statistics, etc.
569 */
570 if (alt == 1) {
571 struct net_device *net;
572
573 /* Enable zlps by default for ECM conformance;
574 * override for musb_hdrc (avoids txdma ovhead).
575 */
576 ecm->port.is_zlp_ok = !(gadget_is_musbhdrc(cdev->gadget)
577 );
578 ecm->port.cdc_filter = DEFAULT_FILTER;
579 DBG(cdev, "activate ecm\n");
580 net = gether_connect(&ecm->port);
581 if (IS_ERR(net))
582 return PTR_ERR(net);
583 }
584
585 /* NOTE this can be a minor disagreement with the ECM spec,
586 * which says speed notifications will "always" follow
587 * connection notifications. But we allow one connect to
588 * follow another (if the first is in flight), and instead
589 * just guarantee that a speed notification is always sent.
590 */
591 ecm_notify(ecm);
592 } else
593 goto fail;
594
595 return 0;
596fail:
597 return -EINVAL;
598}
599
600/* Because the data interface supports multiple altsettings,
601 * this ECM function *MUST* implement a get_alt() method.
602 */
603static int ecm_get_alt(struct usb_function *f, unsigned intf)
604{
605 struct f_ecm *ecm = func_to_ecm(f);
606
607 if (intf == ecm->ctrl_id)
608 return 0;
609 return ecm->port.in_ep->driver_data ? 1 : 0;
610}
611
612static void ecm_disable(struct usb_function *f)
613{
614 struct f_ecm *ecm = func_to_ecm(f);
615 struct usb_composite_dev *cdev = f->config->cdev;
616
617 DBG(cdev, "ecm deactivated\n");
618
619 if (ecm->port.in_ep->driver_data)
620 gether_disconnect(&ecm->port);
621
622 if (ecm->notify->driver_data) {
623 usb_ep_disable(ecm->notify);
624 ecm->notify->driver_data = NULL;
625 ecm->notify->desc = NULL;
626 }
627}
628
629/*-------------------------------------------------------------------------*/
630
631/*
632 * Callbacks let us notify the host about connect/disconnect when the
633 * net device is opened or closed.
634 *
635 * For testing, note that link states on this side include both opened
636 * and closed variants of:
637 *
638 * - disconnected/unconfigured
639 * - configured but inactive (data alt 0)
640 * - configured and active (data alt 1)
641 *
642 * Each needs to be tested with unplug, rmmod, SET_CONFIGURATION, and
643 * SET_INTERFACE (altsetting). Remember also that "configured" doesn't
644 * imply the host is actually polling the notification endpoint, and
645 * likewise that "active" doesn't imply it's actually using the data
646 * endpoints for traffic.
647 */
648
649static void ecm_open(struct gether *geth)
650{
651 struct f_ecm *ecm = func_to_ecm(&geth->func);
652
653 DBG(ecm->port.func.config->cdev, "%s\n", __func__);
654
655 ecm->is_open = true;
656 ecm_notify(ecm);
657}
658
659static void ecm_close(struct gether *geth)
660{
661 struct f_ecm *ecm = func_to_ecm(&geth->func);
662
663 DBG(ecm->port.func.config->cdev, "%s\n", __func__);
664
665 ecm->is_open = false;
666 ecm_notify(ecm);
667}
668
669/*-------------------------------------------------------------------------*/
670
671/* ethernet function driver setup/binding */
672
673static int
674ecm_bind(struct usb_configuration *c, struct usb_function *f)
675{
676 struct usb_composite_dev *cdev = c->cdev;
677 struct f_ecm *ecm = func_to_ecm(f);
678 int status;
679 struct usb_ep *ep;
680
681 /* allocate instance-specific interface IDs */
682 status = usb_interface_id(c, f);
683 if (status < 0)
684 goto fail;
685 ecm->ctrl_id = status;
686
687 ecm_control_intf.bInterfaceNumber = status;
688 ecm_union_desc.bMasterInterface0 = status;
689
690 status = usb_interface_id(c, f);
691 if (status < 0)
692 goto fail;
693 ecm->data_id = status;
694
695 ecm_data_nop_intf.bInterfaceNumber = status;
696 ecm_data_intf.bInterfaceNumber = status;
697 ecm_union_desc.bSlaveInterface0 = status;
698
699 status = -ENODEV;
700
701 /* allocate instance-specific endpoints */
702 ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_in_desc);
703 if (!ep)
704 goto fail;
705 ecm->port.in_ep = ep;
706 ep->driver_data = cdev; /* claim */
707
708 ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_out_desc);
709 if (!ep)
710 goto fail;
711 ecm->port.out_ep = ep;
712 ep->driver_data = cdev; /* claim */
713
714 /* NOTE: a status/notification endpoint is *OPTIONAL* but we
715 * don't treat it that way. It's simpler, and some newer CDC
716 * profiles (wireless handsets) no longer treat it as optional.
717 */
718 ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_notify_desc);
719 if (!ep)
720 goto fail;
721 ecm->notify = ep;
722 ep->driver_data = cdev; /* claim */
723
724 status = -ENOMEM;
725
726 /* allocate notification request and buffer */
727 ecm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
728 if (!ecm->notify_req)
729 goto fail;
730 ecm->notify_req->buf = kmalloc(ECM_STATUS_BYTECOUNT, GFP_KERNEL);
731 if (!ecm->notify_req->buf)
732 goto fail;
733 ecm->notify_req->context = ecm;
734 ecm->notify_req->complete = ecm_notify_complete;
735
736 /* copy descriptors, and track endpoint copies */
737 f->descriptors = usb_copy_descriptors(ecm_fs_function);
738 if (!f->descriptors)
739 goto fail;
740
741 /* support all relevant hardware speeds... we expect that when
742 * hardware is dual speed, all bulk-capable endpoints work at
743 * both speeds
744 */
745 if (gadget_is_dualspeed(c->cdev->gadget)) {
746 hs_ecm_in_desc.bEndpointAddress =
747 fs_ecm_in_desc.bEndpointAddress;
748 hs_ecm_out_desc.bEndpointAddress =
749 fs_ecm_out_desc.bEndpointAddress;
750 hs_ecm_notify_desc.bEndpointAddress =
751 fs_ecm_notify_desc.bEndpointAddress;
752
753 /* copy descriptors, and track endpoint copies */
754 f->hs_descriptors = usb_copy_descriptors(ecm_hs_function);
755 if (!f->hs_descriptors)
756 goto fail;
757 }
758
759 if (gadget_is_superspeed(c->cdev->gadget)) {
760 ss_ecm_in_desc.bEndpointAddress =
761 fs_ecm_in_desc.bEndpointAddress;
762 ss_ecm_out_desc.bEndpointAddress =
763 fs_ecm_out_desc.bEndpointAddress;
764 ss_ecm_notify_desc.bEndpointAddress =
765 fs_ecm_notify_desc.bEndpointAddress;
766
767 /* copy descriptors, and track endpoint copies */
768 f->ss_descriptors = usb_copy_descriptors(ecm_ss_function);
769 if (!f->ss_descriptors)
770 goto fail;
771 }
772
773 /* NOTE: all that is done without knowing or caring about
774 * the network link ... which is unavailable to this code
775 * until we're activated via set_alt().
776 */
777
778 ecm->port.open = ecm_open;
779 ecm->port.close = ecm_close;
780
781 DBG(cdev, "CDC Ethernet: %s speed IN/%s OUT/%s NOTIFY/%s\n",
782 gadget_is_superspeed(c->cdev->gadget) ? "super" :
783 gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
784 ecm->port.in_ep->name, ecm->port.out_ep->name,
785 ecm->notify->name);
786 return 0;
787
788fail:
789 if (f->descriptors)
790 usb_free_descriptors(f->descriptors);
791 if (f->hs_descriptors)
792 usb_free_descriptors(f->hs_descriptors);
793
794 if (ecm->notify_req) {
795 kfree(ecm->notify_req->buf);
796 usb_ep_free_request(ecm->notify, ecm->notify_req);
797 }
798
799 /* we might as well release our claims on endpoints */
800 if (ecm->notify)
801 ecm->notify->driver_data = NULL;
802 if (ecm->port.out_ep->desc)
803 ecm->port.out_ep->driver_data = NULL;
804 if (ecm->port.in_ep->desc)
805 ecm->port.in_ep->driver_data = NULL;
806
807 ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
808
809 return status;
810}
811
812static void
813ecm_unbind(struct usb_configuration *c, struct usb_function *f)
814{
815 struct f_ecm *ecm = func_to_ecm(f);
816
817 DBG(c->cdev, "ecm unbind\n");
818
819 if (gadget_is_superspeed(c->cdev->gadget))
820 usb_free_descriptors(f->ss_descriptors);
821 if (gadget_is_dualspeed(c->cdev->gadget))
822 usb_free_descriptors(f->hs_descriptors);
823 usb_free_descriptors(f->descriptors);
824
825 kfree(ecm->notify_req->buf);
826 usb_ep_free_request(ecm->notify, ecm->notify_req);
827
828 ecm_string_defs[1].s = NULL;
829 kfree(ecm);
830}
831
832/**
833 * ecm_bind_config - add CDC Ethernet network link to a configuration
834 * @c: the configuration to support the network link
835 * @ethaddr: a buffer in which the ethernet address of the host side
836 * side of the link was recorded
837 * Context: single threaded during gadget setup
838 *
839 * Returns zero on success, else negative errno.
840 *
841 * Caller must have called @gether_setup(). Caller is also responsible
842 * for calling @gether_cleanup() before module unload.
843 */
844int
845ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
846{
847 struct f_ecm *ecm;
848 int status;
849
850 if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
851 return -EINVAL;
852
853 /* maybe allocate device-global string IDs */
854 if (ecm_string_defs[0].id == 0) {
855
856 /* control interface label */
857 status = usb_string_id(c->cdev);
858 if (status < 0)
859 return status;
860 ecm_string_defs[0].id = status;
861 ecm_control_intf.iInterface = status;
862
863 /* data interface label */
864 status = usb_string_id(c->cdev);
865 if (status < 0)
866 return status;
867 ecm_string_defs[2].id = status;
868 ecm_data_intf.iInterface = status;
869
870 /* MAC address */
871 status = usb_string_id(c->cdev);
872 if (status < 0)
873 return status;
874 ecm_string_defs[1].id = status;
875 ecm_desc.iMACAddress = status;
876 }
877
878 /* allocate and initialize one new instance */
879 ecm = kzalloc(sizeof *ecm, GFP_KERNEL);
880 if (!ecm)
881 return -ENOMEM;
882
883 /* export host's Ethernet address in CDC format */
884 snprintf(ecm->ethaddr, sizeof ecm->ethaddr,
885 "%02X%02X%02X%02X%02X%02X",
886 ethaddr[0], ethaddr[1], ethaddr[2],
887 ethaddr[3], ethaddr[4], ethaddr[5]);
888 ecm_string_defs[1].s = ecm->ethaddr;
889
890 ecm->port.cdc_filter = DEFAULT_FILTER;
891
892 ecm->port.func.name = "cdc_ethernet";
893 ecm->port.func.strings = ecm_strings;
894 /* descriptors are per-instance copies */
895 ecm->port.func.bind = ecm_bind;
896 ecm->port.func.unbind = ecm_unbind;
897 ecm->port.func.set_alt = ecm_set_alt;
898 ecm->port.func.get_alt = ecm_get_alt;
899 ecm->port.func.setup = ecm_setup;
900 ecm->port.func.disable = ecm_disable;
901
902 status = usb_add_function(c, &ecm->port.func);
903 if (status) {
904 ecm_string_defs[1].s = NULL;
905 kfree(ecm);
906 }
907 return status;
908}