Loading...
Note: File does not exist in v6.8.
1/******************************************************************************
2 *
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
5 *
6 * GPL LICENSE SUMMARY
7 *
8 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of version 2 of the GNU General Public License as
12 * published by the Free Software Foundation.
13 *
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22 * USA
23 *
24 * The full GNU General Public License is included in this distribution
25 * in the file called LICENSE.GPL.
26 *
27 * Contact Information:
28 * Intel Linux Wireless <ilw@linux.intel.com>
29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30 *
31 * BSD LICENSE
32 *
33 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
34 * All rights reserved.
35 *
36 * Redistribution and use in source and binary forms, with or without
37 * modification, are permitted provided that the following conditions
38 * are met:
39 *
40 * * Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * * Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in
44 * the documentation and/or other materials provided with the
45 * distribution.
46 * * Neither the name Intel Corporation nor the names of its
47 * contributors may be used to endorse or promote products derived
48 * from this software without specific prior written permission.
49 *
50 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61 *
62 *****************************************************************************/
63/*
64 * Please use this file (iwl-3945-hw.h) only for hardware-related definitions.
65 * Please use iwl-commands.h for uCode API definitions.
66 * Please use iwl-3945.h for driver implementation definitions.
67 */
68
69#ifndef __iwl_3945_hw__
70#define __iwl_3945_hw__
71
72#include "iwl-eeprom.h"
73
74/* RSSI to dBm */
75#define IWL39_RSSI_OFFSET 95
76
77/*
78 * EEPROM related constants, enums, and structures.
79 */
80#define EEPROM_SKU_CAP_OP_MODE_MRC (1 << 7)
81
82/*
83 * Mapping of a Tx power level, at factory calibration temperature,
84 * to a radio/DSP gain table index.
85 * One for each of 5 "sample" power levels in each band.
86 * v_det is measured at the factory, using the 3945's built-in power amplifier
87 * (PA) output voltage detector. This same detector is used during Tx of
88 * long packets in normal operation to provide feedback as to proper output
89 * level.
90 * Data copied from EEPROM.
91 * DO NOT ALTER THIS STRUCTURE!!!
92 */
93struct iwl3945_eeprom_txpower_sample {
94 u8 gain_index; /* index into power (gain) setup table ... */
95 s8 power; /* ... for this pwr level for this chnl group */
96 u16 v_det; /* PA output voltage */
97} __packed;
98
99/*
100 * Mappings of Tx power levels -> nominal radio/DSP gain table indexes.
101 * One for each channel group (a.k.a. "band") (1 for BG, 4 for A).
102 * Tx power setup code interpolates between the 5 "sample" power levels
103 * to determine the nominal setup for a requested power level.
104 * Data copied from EEPROM.
105 * DO NOT ALTER THIS STRUCTURE!!!
106 */
107struct iwl3945_eeprom_txpower_group {
108 struct iwl3945_eeprom_txpower_sample samples[5]; /* 5 power levels */
109 s32 a, b, c, d, e; /* coefficients for voltage->power
110 * formula (signed) */
111 s32 Fa, Fb, Fc, Fd, Fe; /* these modify coeffs based on
112 * frequency (signed) */
113 s8 saturation_power; /* highest power possible by h/w in this
114 * band */
115 u8 group_channel; /* "representative" channel # in this band */
116 s16 temperature; /* h/w temperature at factory calib this band
117 * (signed) */
118} __packed;
119
120/*
121 * Temperature-based Tx-power compensation data, not band-specific.
122 * These coefficients are use to modify a/b/c/d/e coeffs based on
123 * difference between current temperature and factory calib temperature.
124 * Data copied from EEPROM.
125 */
126struct iwl3945_eeprom_temperature_corr {
127 u32 Ta;
128 u32 Tb;
129 u32 Tc;
130 u32 Td;
131 u32 Te;
132} __packed;
133
134/*
135 * EEPROM map
136 */
137struct iwl3945_eeprom {
138 u8 reserved0[16];
139 u16 device_id; /* abs.ofs: 16 */
140 u8 reserved1[2];
141 u16 pmc; /* abs.ofs: 20 */
142 u8 reserved2[20];
143 u8 mac_address[6]; /* abs.ofs: 42 */
144 u8 reserved3[58];
145 u16 board_revision; /* abs.ofs: 106 */
146 u8 reserved4[11];
147 u8 board_pba_number[9]; /* abs.ofs: 119 */
148 u8 reserved5[8];
149 u16 version; /* abs.ofs: 136 */
150 u8 sku_cap; /* abs.ofs: 138 */
151 u8 leds_mode; /* abs.ofs: 139 */
152 u16 oem_mode;
153 u16 wowlan_mode; /* abs.ofs: 142 */
154 u16 leds_time_interval; /* abs.ofs: 144 */
155 u8 leds_off_time; /* abs.ofs: 146 */
156 u8 leds_on_time; /* abs.ofs: 147 */
157 u8 almgor_m_version; /* abs.ofs: 148 */
158 u8 antenna_switch_type; /* abs.ofs: 149 */
159 u8 reserved6[42];
160 u8 sku_id[4]; /* abs.ofs: 192 */
161
162/*
163 * Per-channel regulatory data.
164 *
165 * Each channel that *might* be supported by 3945 has a fixed location
166 * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
167 * txpower (MSB).
168 *
169 * Entries immediately below are for 20 MHz channel width.
170 *
171 * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
172 */
173 u16 band_1_count; /* abs.ofs: 196 */
174 struct iwl_eeprom_channel band_1_channels[14]; /* abs.ofs: 198 */
175
176/*
177 * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
178 * 5.0 GHz channels 7, 8, 11, 12, 16
179 * (4915-5080MHz) (none of these is ever supported)
180 */
181 u16 band_2_count; /* abs.ofs: 226 */
182 struct iwl_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */
183
184/*
185 * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
186 * (5170-5320MHz)
187 */
188 u16 band_3_count; /* abs.ofs: 254 */
189 struct iwl_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */
190
191/*
192 * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
193 * (5500-5700MHz)
194 */
195 u16 band_4_count; /* abs.ofs: 280 */
196 struct iwl_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */
197
198/*
199 * 5.7 GHz channels 145, 149, 153, 157, 161, 165
200 * (5725-5825MHz)
201 */
202 u16 band_5_count; /* abs.ofs: 304 */
203 struct iwl_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */
204
205 u8 reserved9[194];
206
207/*
208 * 3945 Txpower calibration data.
209 */
210#define IWL_NUM_TX_CALIB_GROUPS 5
211 struct iwl3945_eeprom_txpower_group groups[IWL_NUM_TX_CALIB_GROUPS];
212/* abs.ofs: 512 */
213 struct iwl3945_eeprom_temperature_corr corrections; /* abs.ofs: 832 */
214 u8 reserved16[172]; /* fill out to full 1024 byte block */
215} __packed;
216
217#define IWL3945_EEPROM_IMG_SIZE 1024
218
219/* End of EEPROM */
220
221#define PCI_CFG_REV_ID_BIT_BASIC_SKU (0x40) /* bit 6 */
222#define PCI_CFG_REV_ID_BIT_RTP (0x80) /* bit 7 */
223
224/* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */
225#define IWL39_NUM_QUEUES 5
226#define IWL39_CMD_QUEUE_NUM 4
227
228#define IWL_DEFAULT_TX_RETRY 15
229
230/*********************************************/
231
232#define RFD_SIZE 4
233#define NUM_TFD_CHUNKS 4
234
235#define RX_QUEUE_SIZE 256
236#define RX_QUEUE_MASK 255
237#define RX_QUEUE_SIZE_LOG 8
238
239#define U32_PAD(n) ((4-(n))&0x3)
240
241#define TFD_CTL_COUNT_SET(n) (n << 24)
242#define TFD_CTL_COUNT_GET(ctl) ((ctl >> 24) & 7)
243#define TFD_CTL_PAD_SET(n) (n << 28)
244#define TFD_CTL_PAD_GET(ctl) (ctl >> 28)
245
246/* Sizes and addresses for instruction and data memory (SRAM) in
247 * 3945's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */
248#define IWL39_RTC_INST_LOWER_BOUND (0x000000)
249#define IWL39_RTC_INST_UPPER_BOUND (0x014000)
250
251#define IWL39_RTC_DATA_LOWER_BOUND (0x800000)
252#define IWL39_RTC_DATA_UPPER_BOUND (0x808000)
253
254#define IWL39_RTC_INST_SIZE (IWL39_RTC_INST_UPPER_BOUND - \
255 IWL39_RTC_INST_LOWER_BOUND)
256#define IWL39_RTC_DATA_SIZE (IWL39_RTC_DATA_UPPER_BOUND - \
257 IWL39_RTC_DATA_LOWER_BOUND)
258
259#define IWL39_MAX_INST_SIZE IWL39_RTC_INST_SIZE
260#define IWL39_MAX_DATA_SIZE IWL39_RTC_DATA_SIZE
261
262/* Size of uCode instruction memory in bootstrap state machine */
263#define IWL39_MAX_BSM_SIZE IWL39_RTC_INST_SIZE
264
265static inline int iwl3945_hw_valid_rtc_data_addr(u32 addr)
266{
267 return (addr >= IWL39_RTC_DATA_LOWER_BOUND) &&
268 (addr < IWL39_RTC_DATA_UPPER_BOUND);
269}
270
271/* Base physical address of iwl3945_shared is provided to FH_TSSR_CBB_BASE
272 * and &iwl3945_shared.rx_read_ptr[0] is provided to FH_RCSR_RPTR_ADDR(0) */
273struct iwl3945_shared {
274 __le32 tx_base_ptr[8];
275} __packed;
276
277static inline u8 iwl3945_hw_get_rate(__le16 rate_n_flags)
278{
279 return le16_to_cpu(rate_n_flags) & 0xFF;
280}
281
282static inline u16 iwl3945_hw_get_rate_n_flags(__le16 rate_n_flags)
283{
284 return le16_to_cpu(rate_n_flags);
285}
286
287static inline __le16 iwl3945_hw_set_rate_n_flags(u8 rate, u16 flags)
288{
289 return cpu_to_le16((u16)rate|flags);
290}
291#endif