Loading...
1/* linux/drivers/mmc/host/sdhci-s3c.c
2 *
3 * Copyright 2008 Openmoko Inc.
4 * Copyright 2008 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 * http://armlinux.simtec.co.uk/
7 *
8 * SDHCI (HSMMC) support for Samsung SoC
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15#include <linux/delay.h>
16#include <linux/dma-mapping.h>
17#include <linux/platform_device.h>
18#include <linux/slab.h>
19#include <linux/clk.h>
20#include <linux/io.h>
21#include <linux/gpio.h>
22#include <linux/module.h>
23
24#include <linux/mmc/host.h>
25
26#include <plat/sdhci.h>
27#include <plat/regs-sdhci.h>
28
29#include "sdhci.h"
30
31#define MAX_BUS_CLK (4)
32
33/**
34 * struct sdhci_s3c - S3C SDHCI instance
35 * @host: The SDHCI host created
36 * @pdev: The platform device we where created from.
37 * @ioarea: The resource created when we claimed the IO area.
38 * @pdata: The platform data for this controller.
39 * @cur_clk: The index of the current bus clock.
40 * @clk_io: The clock for the internal bus interface.
41 * @clk_bus: The clocks that are available for the SD/MMC bus clock.
42 */
43struct sdhci_s3c {
44 struct sdhci_host *host;
45 struct platform_device *pdev;
46 struct resource *ioarea;
47 struct s3c_sdhci_platdata *pdata;
48 unsigned int cur_clk;
49 int ext_cd_irq;
50 int ext_cd_gpio;
51
52 struct clk *clk_io;
53 struct clk *clk_bus[MAX_BUS_CLK];
54};
55
56static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
57{
58 return sdhci_priv(host);
59}
60
61/**
62 * get_curclk - convert ctrl2 register to clock source number
63 * @ctrl2: Control2 register value.
64 */
65static u32 get_curclk(u32 ctrl2)
66{
67 ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
68 ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
69
70 return ctrl2;
71}
72
73static void sdhci_s3c_check_sclk(struct sdhci_host *host)
74{
75 struct sdhci_s3c *ourhost = to_s3c(host);
76 u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
77
78 if (get_curclk(tmp) != ourhost->cur_clk) {
79 dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
80
81 tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
82 tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
83 writel(tmp, host->ioaddr + 0x80);
84 }
85}
86
87/**
88 * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
89 * @host: The SDHCI host instance.
90 *
91 * Callback to return the maximum clock rate acheivable by the controller.
92*/
93static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
94{
95 struct sdhci_s3c *ourhost = to_s3c(host);
96 struct clk *busclk;
97 unsigned int rate, max;
98 int clk;
99
100 /* note, a reset will reset the clock source */
101
102 sdhci_s3c_check_sclk(host);
103
104 for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
105 busclk = ourhost->clk_bus[clk];
106 if (!busclk)
107 continue;
108
109 rate = clk_get_rate(busclk);
110 if (rate > max)
111 max = rate;
112 }
113
114 return max;
115}
116
117/**
118 * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
119 * @ourhost: Our SDHCI instance.
120 * @src: The source clock index.
121 * @wanted: The clock frequency wanted.
122 */
123static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
124 unsigned int src,
125 unsigned int wanted)
126{
127 unsigned long rate;
128 struct clk *clksrc = ourhost->clk_bus[src];
129 int div;
130
131 if (!clksrc)
132 return UINT_MAX;
133
134 /*
135 * Clock divider's step is different as 1 from that of host controller
136 * when 'clk_type' is S3C_SDHCI_CLK_DIV_EXTERNAL.
137 */
138 if (ourhost->pdata->clk_type) {
139 rate = clk_round_rate(clksrc, wanted);
140 return wanted - rate;
141 }
142
143 rate = clk_get_rate(clksrc);
144
145 for (div = 1; div < 256; div *= 2) {
146 if ((rate / div) <= wanted)
147 break;
148 }
149
150 dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
151 src, rate, wanted, rate / div);
152
153 return (wanted - (rate / div));
154}
155
156/**
157 * sdhci_s3c_set_clock - callback on clock change
158 * @host: The SDHCI host being changed
159 * @clock: The clock rate being requested.
160 *
161 * When the card's clock is going to be changed, look at the new frequency
162 * and find the best clock source to go with it.
163*/
164static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
165{
166 struct sdhci_s3c *ourhost = to_s3c(host);
167 unsigned int best = UINT_MAX;
168 unsigned int delta;
169 int best_src = 0;
170 int src;
171 u32 ctrl;
172
173 /* don't bother if the clock is going off. */
174 if (clock == 0)
175 return;
176
177 for (src = 0; src < MAX_BUS_CLK; src++) {
178 delta = sdhci_s3c_consider_clock(ourhost, src, clock);
179 if (delta < best) {
180 best = delta;
181 best_src = src;
182 }
183 }
184
185 dev_dbg(&ourhost->pdev->dev,
186 "selected source %d, clock %d, delta %d\n",
187 best_src, clock, best);
188
189 /* select the new clock source */
190
191 if (ourhost->cur_clk != best_src) {
192 struct clk *clk = ourhost->clk_bus[best_src];
193
194 /* turn clock off to card before changing clock source */
195 writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
196
197 ourhost->cur_clk = best_src;
198 host->max_clk = clk_get_rate(clk);
199
200 ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
201 ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
202 ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
203 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
204 }
205
206 /* reconfigure the hardware for new clock rate */
207
208 {
209 struct mmc_ios ios;
210
211 ios.clock = clock;
212
213 if (ourhost->pdata->cfg_card)
214 (ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr,
215 &ios, NULL);
216 }
217}
218
219/**
220 * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
221 * @host: The SDHCI host being queried
222 *
223 * To init mmc host properly a minimal clock value is needed. For high system
224 * bus clock's values the standard formula gives values out of allowed range.
225 * The clock still can be set to lower values, if clock source other then
226 * system bus is selected.
227*/
228static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
229{
230 struct sdhci_s3c *ourhost = to_s3c(host);
231 unsigned int delta, min = UINT_MAX;
232 int src;
233
234 for (src = 0; src < MAX_BUS_CLK; src++) {
235 delta = sdhci_s3c_consider_clock(ourhost, src, 0);
236 if (delta == UINT_MAX)
237 continue;
238 /* delta is a negative value in this case */
239 if (-delta < min)
240 min = -delta;
241 }
242 return min;
243}
244
245/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
246static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
247{
248 struct sdhci_s3c *ourhost = to_s3c(host);
249
250 return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], UINT_MAX);
251}
252
253/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
254static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
255{
256 struct sdhci_s3c *ourhost = to_s3c(host);
257
258 /*
259 * initial clock can be in the frequency range of
260 * 100KHz-400KHz, so we set it as max value.
261 */
262 return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], 400000);
263}
264
265/* sdhci_cmu_set_clock - callback on clock change.*/
266static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
267{
268 struct sdhci_s3c *ourhost = to_s3c(host);
269
270 /* don't bother if the clock is going off */
271 if (clock == 0)
272 return;
273
274 sdhci_s3c_set_clock(host, clock);
275
276 clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
277
278 host->clock = clock;
279}
280
281/**
282 * sdhci_s3c_platform_8bit_width - support 8bit buswidth
283 * @host: The SDHCI host being queried
284 * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
285 *
286 * We have 8-bit width support but is not a v3 controller.
287 * So we add platform_8bit_width() and support 8bit width.
288 */
289static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
290{
291 u8 ctrl;
292
293 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
294
295 switch (width) {
296 case MMC_BUS_WIDTH_8:
297 ctrl |= SDHCI_CTRL_8BITBUS;
298 ctrl &= ~SDHCI_CTRL_4BITBUS;
299 break;
300 case MMC_BUS_WIDTH_4:
301 ctrl |= SDHCI_CTRL_4BITBUS;
302 ctrl &= ~SDHCI_CTRL_8BITBUS;
303 break;
304 default:
305 ctrl &= ~SDHCI_CTRL_4BITBUS;
306 ctrl &= ~SDHCI_CTRL_8BITBUS;
307 break;
308 }
309
310 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
311
312 return 0;
313}
314
315static struct sdhci_ops sdhci_s3c_ops = {
316 .get_max_clock = sdhci_s3c_get_max_clk,
317 .set_clock = sdhci_s3c_set_clock,
318 .get_min_clock = sdhci_s3c_get_min_clock,
319 .platform_8bit_width = sdhci_s3c_platform_8bit_width,
320};
321
322static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
323{
324 struct sdhci_host *host = platform_get_drvdata(dev);
325 unsigned long flags;
326
327 if (host) {
328 spin_lock_irqsave(&host->lock, flags);
329 if (state) {
330 dev_dbg(&dev->dev, "card inserted.\n");
331 host->flags &= ~SDHCI_DEVICE_DEAD;
332 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
333 } else {
334 dev_dbg(&dev->dev, "card removed.\n");
335 host->flags |= SDHCI_DEVICE_DEAD;
336 host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
337 }
338 tasklet_schedule(&host->card_tasklet);
339 spin_unlock_irqrestore(&host->lock, flags);
340 }
341}
342
343static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void *dev_id)
344{
345 struct sdhci_s3c *sc = dev_id;
346 int status = gpio_get_value(sc->ext_cd_gpio);
347 if (sc->pdata->ext_cd_gpio_invert)
348 status = !status;
349 sdhci_s3c_notify_change(sc->pdev, status);
350 return IRQ_HANDLED;
351}
352
353static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
354{
355 struct s3c_sdhci_platdata *pdata = sc->pdata;
356 struct device *dev = &sc->pdev->dev;
357
358 if (gpio_request(pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
359 sc->ext_cd_gpio = pdata->ext_cd_gpio;
360 sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
361 if (sc->ext_cd_irq &&
362 request_threaded_irq(sc->ext_cd_irq, NULL,
363 sdhci_s3c_gpio_card_detect_thread,
364 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
365 dev_name(dev), sc) == 0) {
366 int status = gpio_get_value(sc->ext_cd_gpio);
367 if (pdata->ext_cd_gpio_invert)
368 status = !status;
369 sdhci_s3c_notify_change(sc->pdev, status);
370 } else {
371 dev_warn(dev, "cannot request irq for card detect\n");
372 sc->ext_cd_irq = 0;
373 }
374 } else {
375 dev_err(dev, "cannot request gpio for card detect\n");
376 }
377}
378
379static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
380{
381 struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
382 struct device *dev = &pdev->dev;
383 struct sdhci_host *host;
384 struct sdhci_s3c *sc;
385 struct resource *res;
386 int ret, irq, ptr, clks;
387
388 if (!pdata) {
389 dev_err(dev, "no device data specified\n");
390 return -ENOENT;
391 }
392
393 irq = platform_get_irq(pdev, 0);
394 if (irq < 0) {
395 dev_err(dev, "no irq specified\n");
396 return irq;
397 }
398
399 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
400 if (!res) {
401 dev_err(dev, "no memory specified\n");
402 return -ENOENT;
403 }
404
405 host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
406 if (IS_ERR(host)) {
407 dev_err(dev, "sdhci_alloc_host() failed\n");
408 return PTR_ERR(host);
409 }
410
411 sc = sdhci_priv(host);
412
413 sc->host = host;
414 sc->pdev = pdev;
415 sc->pdata = pdata;
416 sc->ext_cd_gpio = -1; /* invalid gpio number */
417
418 platform_set_drvdata(pdev, host);
419
420 sc->clk_io = clk_get(dev, "hsmmc");
421 if (IS_ERR(sc->clk_io)) {
422 dev_err(dev, "failed to get io clock\n");
423 ret = PTR_ERR(sc->clk_io);
424 goto err_io_clk;
425 }
426
427 /* enable the local io clock and keep it running for the moment. */
428 clk_enable(sc->clk_io);
429
430 for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
431 struct clk *clk;
432 char *name = pdata->clocks[ptr];
433
434 if (name == NULL)
435 continue;
436
437 clk = clk_get(dev, name);
438 if (IS_ERR(clk)) {
439 dev_err(dev, "failed to get clock %s\n", name);
440 continue;
441 }
442
443 clks++;
444 sc->clk_bus[ptr] = clk;
445
446 /*
447 * save current clock index to know which clock bus
448 * is used later in overriding functions.
449 */
450 sc->cur_clk = ptr;
451
452 clk_enable(clk);
453
454 dev_info(dev, "clock source %d: %s (%ld Hz)\n",
455 ptr, name, clk_get_rate(clk));
456 }
457
458 if (clks == 0) {
459 dev_err(dev, "failed to find any bus clocks\n");
460 ret = -ENOENT;
461 goto err_no_busclks;
462 }
463
464 sc->ioarea = request_mem_region(res->start, resource_size(res),
465 mmc_hostname(host->mmc));
466 if (!sc->ioarea) {
467 dev_err(dev, "failed to reserve register area\n");
468 ret = -ENXIO;
469 goto err_req_regs;
470 }
471
472 host->ioaddr = ioremap_nocache(res->start, resource_size(res));
473 if (!host->ioaddr) {
474 dev_err(dev, "failed to map registers\n");
475 ret = -ENXIO;
476 goto err_req_regs;
477 }
478
479 /* Ensure we have minimal gpio selected CMD/CLK/Detect */
480 if (pdata->cfg_gpio)
481 pdata->cfg_gpio(pdev, pdata->max_width);
482
483 host->hw_name = "samsung-hsmmc";
484 host->ops = &sdhci_s3c_ops;
485 host->quirks = 0;
486 host->irq = irq;
487
488 /* Setup quirks for the controller */
489 host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
490 host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
491
492#ifndef CONFIG_MMC_SDHCI_S3C_DMA
493
494 /* we currently see overruns on errors, so disable the SDMA
495 * support as well. */
496 host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
497
498#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
499
500 /* It seems we do not get an DATA transfer complete on non-busy
501 * transfers, not sure if this is a problem with this specific
502 * SDHCI block, or a missing configuration that needs to be set. */
503 host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
504
505 /* This host supports the Auto CMD12 */
506 host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
507
508 /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
509 host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
510
511 if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
512 pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
513 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
514
515 if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
516 host->mmc->caps = MMC_CAP_NONREMOVABLE;
517
518 if (pdata->host_caps)
519 host->mmc->caps |= pdata->host_caps;
520
521 host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
522 SDHCI_QUIRK_32BIT_DMA_SIZE);
523
524 /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
525 host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
526
527 /*
528 * If controller does not have internal clock divider,
529 * we can use overriding functions instead of default.
530 */
531 if (pdata->clk_type) {
532 sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
533 sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
534 sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
535 }
536
537 /* It supports additional host capabilities if needed */
538 if (pdata->host_caps)
539 host->mmc->caps |= pdata->host_caps;
540
541 ret = sdhci_add_host(host);
542 if (ret) {
543 dev_err(dev, "sdhci_add_host() failed\n");
544 goto err_add_host;
545 }
546
547 /* The following two methods of card detection might call
548 sdhci_s3c_notify_change() immediately, so they can be called
549 only after sdhci_add_host(). Setup errors are ignored. */
550 if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
551 pdata->ext_cd_init(&sdhci_s3c_notify_change);
552 if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
553 gpio_is_valid(pdata->ext_cd_gpio))
554 sdhci_s3c_setup_card_detect_gpio(sc);
555
556 return 0;
557
558 err_add_host:
559 release_resource(sc->ioarea);
560 kfree(sc->ioarea);
561
562 err_req_regs:
563 for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
564 clk_disable(sc->clk_bus[ptr]);
565 clk_put(sc->clk_bus[ptr]);
566 }
567
568 err_no_busclks:
569 clk_disable(sc->clk_io);
570 clk_put(sc->clk_io);
571
572 err_io_clk:
573 sdhci_free_host(host);
574
575 return ret;
576}
577
578static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
579{
580 struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
581 struct sdhci_host *host = platform_get_drvdata(pdev);
582 struct sdhci_s3c *sc = sdhci_priv(host);
583 int ptr;
584
585 if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
586 pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
587
588 if (sc->ext_cd_irq)
589 free_irq(sc->ext_cd_irq, sc);
590
591 if (gpio_is_valid(sc->ext_cd_gpio))
592 gpio_free(sc->ext_cd_gpio);
593
594 sdhci_remove_host(host, 1);
595
596 for (ptr = 0; ptr < 3; ptr++) {
597 if (sc->clk_bus[ptr]) {
598 clk_disable(sc->clk_bus[ptr]);
599 clk_put(sc->clk_bus[ptr]);
600 }
601 }
602 clk_disable(sc->clk_io);
603 clk_put(sc->clk_io);
604
605 iounmap(host->ioaddr);
606 release_resource(sc->ioarea);
607 kfree(sc->ioarea);
608
609 sdhci_free_host(host);
610 platform_set_drvdata(pdev, NULL);
611
612 return 0;
613}
614
615#ifdef CONFIG_PM
616
617static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm)
618{
619 struct sdhci_host *host = platform_get_drvdata(dev);
620
621 return sdhci_suspend_host(host, pm);
622}
623
624static int sdhci_s3c_resume(struct platform_device *dev)
625{
626 struct sdhci_host *host = platform_get_drvdata(dev);
627
628 return sdhci_resume_host(host);
629}
630
631#else
632#define sdhci_s3c_suspend NULL
633#define sdhci_s3c_resume NULL
634#endif
635
636static struct platform_driver sdhci_s3c_driver = {
637 .probe = sdhci_s3c_probe,
638 .remove = __devexit_p(sdhci_s3c_remove),
639 .suspend = sdhci_s3c_suspend,
640 .resume = sdhci_s3c_resume,
641 .driver = {
642 .owner = THIS_MODULE,
643 .name = "s3c-sdhci",
644 },
645};
646
647static int __init sdhci_s3c_init(void)
648{
649 return platform_driver_register(&sdhci_s3c_driver);
650}
651
652static void __exit sdhci_s3c_exit(void)
653{
654 platform_driver_unregister(&sdhci_s3c_driver);
655}
656
657module_init(sdhci_s3c_init);
658module_exit(sdhci_s3c_exit);
659
660MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
661MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
662MODULE_LICENSE("GPL v2");
663MODULE_ALIAS("platform:s3c-sdhci");
1// SPDX-License-Identifier: GPL-2.0-only
2/* linux/drivers/mmc/host/sdhci-s3c.c
3 *
4 * Copyright 2008 Openmoko Inc.
5 * Copyright 2008 Simtec Electronics
6 * Ben Dooks <ben@simtec.co.uk>
7 * http://armlinux.simtec.co.uk/
8 *
9 * SDHCI (HSMMC) support for Samsung SoC
10 */
11
12#include <linux/spinlock.h>
13#include <linux/delay.h>
14#include <linux/dma-mapping.h>
15#include <linux/platform_device.h>
16#include <linux/platform_data/mmc-sdhci-s3c.h>
17#include <linux/slab.h>
18#include <linux/clk.h>
19#include <linux/io.h>
20#include <linux/gpio.h>
21#include <linux/module.h>
22#include <linux/of.h>
23#include <linux/of_gpio.h>
24#include <linux/pm.h>
25#include <linux/pm_runtime.h>
26
27#include <linux/mmc/host.h>
28
29#include "sdhci.h"
30
31#define MAX_BUS_CLK (4)
32
33#define S3C_SDHCI_CONTROL2 (0x80)
34#define S3C_SDHCI_CONTROL3 (0x84)
35#define S3C64XX_SDHCI_CONTROL4 (0x8C)
36
37#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR BIT(31)
38#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK BIT(30)
39#define S3C_SDHCI_CTRL2_CDINVRXD3 BIT(29)
40#define S3C_SDHCI_CTRL2_SLCARDOUT BIT(28)
41
42#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24)
43#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24)
44#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24)
45
46#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16)
47#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16)
48#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16)
49
50#define S3C_SDHCI_CTRL2_ENFBCLKTX BIT(15)
51#define S3C_SDHCI_CTRL2_ENFBCLKRX BIT(14)
52#define S3C_SDHCI_CTRL2_SDCDSEL BIT(13)
53#define S3C_SDHCI_CTRL2_SDSIGPC BIT(12)
54#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART BIT(11)
55
56#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9)
57#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9)
58#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9)
59#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9)
60#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9)
61#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9)
62
63#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD BIT(8)
64#define S3C_SDHCI_CTRL2_RWAITMODE BIT(7)
65#define S3C_SDHCI_CTRL2_DISBUFRD BIT(6)
66
67#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4)
68#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4)
69#define S3C_SDHCI_CTRL2_PWRSYNC BIT(3)
70#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON BIT(1)
71#define S3C_SDHCI_CTRL2_HWINITFIN BIT(0)
72
73#define S3C_SDHCI_CTRL3_FCSEL3 BIT(31)
74#define S3C_SDHCI_CTRL3_FCSEL2 BIT(23)
75#define S3C_SDHCI_CTRL3_FCSEL1 BIT(15)
76#define S3C_SDHCI_CTRL3_FCSEL0 BIT(7)
77
78#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24)
79#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24)
80#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24)
81
82#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16)
83#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16)
84#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16)
85
86#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8)
87#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8)
88#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8)
89
90#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0)
91#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0)
92#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0)
93
94#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16)
95#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16)
96#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16)
97#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16)
98#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16)
99#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16)
100
101#define S3C64XX_SDHCI_CONTROL4_BUSY (1)
102
103/**
104 * struct sdhci_s3c - S3C SDHCI instance
105 * @host: The SDHCI host created
106 * @pdev: The platform device we where created from.
107 * @ioarea: The resource created when we claimed the IO area.
108 * @pdata: The platform data for this controller.
109 * @cur_clk: The index of the current bus clock.
110 * @ext_cd_irq: External card detect interrupt.
111 * @clk_io: The clock for the internal bus interface.
112 * @clk_rates: Clock frequencies.
113 * @clk_bus: The clocks that are available for the SD/MMC bus clock.
114 * @no_divider: No or non-standard internal clock divider.
115 */
116struct sdhci_s3c {
117 struct sdhci_host *host;
118 struct platform_device *pdev;
119 struct resource *ioarea;
120 struct s3c_sdhci_platdata *pdata;
121 int cur_clk;
122 int ext_cd_irq;
123
124 struct clk *clk_io;
125 struct clk *clk_bus[MAX_BUS_CLK];
126 unsigned long clk_rates[MAX_BUS_CLK];
127
128 bool no_divider;
129};
130
131/**
132 * struct sdhci_s3c_drv_data - S3C SDHCI platform specific driver data
133 * @sdhci_quirks: sdhci host specific quirks.
134 * @no_divider: no or non-standard internal clock divider.
135 *
136 * Specifies platform specific configuration of sdhci controller.
137 * Note: A structure for driver specific platform data is used for future
138 * expansion of its usage.
139 */
140struct sdhci_s3c_drv_data {
141 unsigned int sdhci_quirks;
142 bool no_divider;
143};
144
145static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
146{
147 return sdhci_priv(host);
148}
149
150/**
151 * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
152 * @host: The SDHCI host instance.
153 *
154 * Callback to return the maximum clock rate acheivable by the controller.
155*/
156static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
157{
158 struct sdhci_s3c *ourhost = to_s3c(host);
159 unsigned long rate, max = 0;
160 int src;
161
162 for (src = 0; src < MAX_BUS_CLK; src++) {
163 rate = ourhost->clk_rates[src];
164 if (rate > max)
165 max = rate;
166 }
167
168 return max;
169}
170
171/**
172 * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
173 * @ourhost: Our SDHCI instance.
174 * @src: The source clock index.
175 * @wanted: The clock frequency wanted.
176 */
177static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
178 unsigned int src,
179 unsigned int wanted)
180{
181 unsigned long rate;
182 struct clk *clksrc = ourhost->clk_bus[src];
183 int shift;
184
185 if (IS_ERR(clksrc))
186 return UINT_MAX;
187
188 /*
189 * If controller uses a non-standard clock division, find the best clock
190 * speed possible with selected clock source and skip the division.
191 */
192 if (ourhost->no_divider) {
193 rate = clk_round_rate(clksrc, wanted);
194 return wanted - rate;
195 }
196
197 rate = ourhost->clk_rates[src];
198
199 for (shift = 0; shift <= 8; ++shift) {
200 if ((rate >> shift) <= wanted)
201 break;
202 }
203
204 if (shift > 8) {
205 dev_dbg(&ourhost->pdev->dev,
206 "clk %d: rate %ld, min rate %lu > wanted %u\n",
207 src, rate, rate / 256, wanted);
208 return UINT_MAX;
209 }
210
211 dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
212 src, rate, wanted, rate >> shift);
213
214 return wanted - (rate >> shift);
215}
216
217/**
218 * sdhci_s3c_set_clock - callback on clock change
219 * @host: The SDHCI host being changed
220 * @clock: The clock rate being requested.
221 *
222 * When the card's clock is going to be changed, look at the new frequency
223 * and find the best clock source to go with it.
224*/
225static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
226{
227 struct sdhci_s3c *ourhost = to_s3c(host);
228 unsigned int best = UINT_MAX;
229 unsigned int delta;
230 int best_src = 0;
231 int src;
232 u32 ctrl;
233
234 host->mmc->actual_clock = 0;
235
236 /* don't bother if the clock is going off. */
237 if (clock == 0) {
238 sdhci_set_clock(host, clock);
239 return;
240 }
241
242 for (src = 0; src < MAX_BUS_CLK; src++) {
243 delta = sdhci_s3c_consider_clock(ourhost, src, clock);
244 if (delta < best) {
245 best = delta;
246 best_src = src;
247 }
248 }
249
250 dev_dbg(&ourhost->pdev->dev,
251 "selected source %d, clock %d, delta %d\n",
252 best_src, clock, best);
253
254 /* select the new clock source */
255 if (ourhost->cur_clk != best_src) {
256 struct clk *clk = ourhost->clk_bus[best_src];
257
258 clk_prepare_enable(clk);
259 if (ourhost->cur_clk >= 0)
260 clk_disable_unprepare(
261 ourhost->clk_bus[ourhost->cur_clk]);
262
263 ourhost->cur_clk = best_src;
264 host->max_clk = ourhost->clk_rates[best_src];
265 }
266
267 /* turn clock off to card before changing clock source */
268 writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
269
270 ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
271 ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
272 ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
273 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
274
275 /* reprogram default hardware configuration */
276 writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
277 host->ioaddr + S3C64XX_SDHCI_CONTROL4);
278
279 ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
280 ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
281 S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
282 S3C_SDHCI_CTRL2_ENFBCLKRX |
283 S3C_SDHCI_CTRL2_DFCNT_NONE |
284 S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
285 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
286
287 /* reconfigure the controller for new clock rate */
288 ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
289 if (clock < 25 * 1000000)
290 ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
291 writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
292
293 sdhci_set_clock(host, clock);
294}
295
296/**
297 * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
298 * @host: The SDHCI host being queried
299 *
300 * To init mmc host properly a minimal clock value is needed. For high system
301 * bus clock's values the standard formula gives values out of allowed range.
302 * The clock still can be set to lower values, if clock source other then
303 * system bus is selected.
304*/
305static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
306{
307 struct sdhci_s3c *ourhost = to_s3c(host);
308 unsigned long rate, min = ULONG_MAX;
309 int src;
310
311 for (src = 0; src < MAX_BUS_CLK; src++) {
312 rate = ourhost->clk_rates[src] / 256;
313 if (!rate)
314 continue;
315 if (rate < min)
316 min = rate;
317 }
318
319 return min;
320}
321
322/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
323static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
324{
325 struct sdhci_s3c *ourhost = to_s3c(host);
326 unsigned long rate, max = 0;
327 int src;
328
329 for (src = 0; src < MAX_BUS_CLK; src++) {
330 struct clk *clk;
331
332 clk = ourhost->clk_bus[src];
333 if (IS_ERR(clk))
334 continue;
335
336 rate = clk_round_rate(clk, ULONG_MAX);
337 if (rate > max)
338 max = rate;
339 }
340
341 return max;
342}
343
344/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
345static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
346{
347 struct sdhci_s3c *ourhost = to_s3c(host);
348 unsigned long rate, min = ULONG_MAX;
349 int src;
350
351 for (src = 0; src < MAX_BUS_CLK; src++) {
352 struct clk *clk;
353
354 clk = ourhost->clk_bus[src];
355 if (IS_ERR(clk))
356 continue;
357
358 rate = clk_round_rate(clk, 0);
359 if (rate < min)
360 min = rate;
361 }
362
363 return min;
364}
365
366/* sdhci_cmu_set_clock - callback on clock change.*/
367static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
368{
369 struct sdhci_s3c *ourhost = to_s3c(host);
370 struct device *dev = &ourhost->pdev->dev;
371 unsigned long timeout;
372 u16 clk = 0;
373 int ret;
374
375 host->mmc->actual_clock = 0;
376
377 /* If the clock is going off, set to 0 at clock control register */
378 if (clock == 0) {
379 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
380 return;
381 }
382
383 sdhci_s3c_set_clock(host, clock);
384
385 /* Reset SD Clock Enable */
386 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
387 clk &= ~SDHCI_CLOCK_CARD_EN;
388 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
389
390 ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
391 if (ret != 0) {
392 dev_err(dev, "%s: failed to set clock rate %uHz\n",
393 mmc_hostname(host->mmc), clock);
394 return;
395 }
396
397 clk = SDHCI_CLOCK_INT_EN;
398 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
399
400 /* Wait max 20 ms */
401 timeout = 20;
402 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
403 & SDHCI_CLOCK_INT_STABLE)) {
404 if (timeout == 0) {
405 dev_err(dev, "%s: Internal clock never stabilised.\n",
406 mmc_hostname(host->mmc));
407 return;
408 }
409 timeout--;
410 mdelay(1);
411 }
412
413 clk |= SDHCI_CLOCK_CARD_EN;
414 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
415}
416
417static struct sdhci_ops sdhci_s3c_ops = {
418 .get_max_clock = sdhci_s3c_get_max_clk,
419 .set_clock = sdhci_s3c_set_clock,
420 .get_min_clock = sdhci_s3c_get_min_clock,
421 .set_bus_width = sdhci_set_bus_width,
422 .reset = sdhci_reset,
423 .set_uhs_signaling = sdhci_set_uhs_signaling,
424};
425
426#ifdef CONFIG_OF
427static int sdhci_s3c_parse_dt(struct device *dev,
428 struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
429{
430 struct device_node *node = dev->of_node;
431 u32 max_width;
432
433 /* if the bus-width property is not specified, assume width as 1 */
434 if (of_property_read_u32(node, "bus-width", &max_width))
435 max_width = 1;
436 pdata->max_width = max_width;
437
438 /* get the card detection method */
439 if (of_property_read_bool(node, "broken-cd")) {
440 pdata->cd_type = S3C_SDHCI_CD_NONE;
441 return 0;
442 }
443
444 if (of_property_read_bool(node, "non-removable")) {
445 pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
446 return 0;
447 }
448
449 if (of_get_named_gpio(node, "cd-gpios", 0))
450 return 0;
451
452 /* assuming internal card detect that will be configured by pinctrl */
453 pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
454 return 0;
455}
456#else
457static int sdhci_s3c_parse_dt(struct device *dev,
458 struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
459{
460 return -EINVAL;
461}
462#endif
463
464static inline const struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
465 struct platform_device *pdev)
466{
467#ifdef CONFIG_OF
468 if (pdev->dev.of_node)
469 return of_device_get_match_data(&pdev->dev);
470#endif
471 return (const struct sdhci_s3c_drv_data *)
472 platform_get_device_id(pdev)->driver_data;
473}
474
475static int sdhci_s3c_probe(struct platform_device *pdev)
476{
477 struct s3c_sdhci_platdata *pdata;
478 const struct sdhci_s3c_drv_data *drv_data;
479 struct device *dev = &pdev->dev;
480 struct sdhci_host *host;
481 struct sdhci_s3c *sc;
482 int ret, irq, ptr, clks;
483
484 if (!pdev->dev.platform_data && !pdev->dev.of_node) {
485 dev_err(dev, "no device data specified\n");
486 return -ENOENT;
487 }
488
489 irq = platform_get_irq(pdev, 0);
490 if (irq < 0)
491 return irq;
492
493 host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
494 if (IS_ERR(host)) {
495 dev_err(dev, "sdhci_alloc_host() failed\n");
496 return PTR_ERR(host);
497 }
498 sc = sdhci_priv(host);
499
500 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
501 if (!pdata) {
502 ret = -ENOMEM;
503 goto err_pdata_io_clk;
504 }
505
506 if (pdev->dev.of_node) {
507 ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
508 if (ret)
509 goto err_pdata_io_clk;
510 } else {
511 memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
512 }
513
514 drv_data = sdhci_s3c_get_driver_data(pdev);
515
516 sc->host = host;
517 sc->pdev = pdev;
518 sc->pdata = pdata;
519 sc->cur_clk = -1;
520
521 platform_set_drvdata(pdev, host);
522
523 sc->clk_io = devm_clk_get(dev, "hsmmc");
524 if (IS_ERR(sc->clk_io)) {
525 dev_err(dev, "failed to get io clock\n");
526 ret = PTR_ERR(sc->clk_io);
527 goto err_pdata_io_clk;
528 }
529
530 /* enable the local io clock and keep it running for the moment. */
531 clk_prepare_enable(sc->clk_io);
532
533 for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
534 char name[14];
535
536 snprintf(name, 14, "mmc_busclk.%d", ptr);
537 sc->clk_bus[ptr] = devm_clk_get(dev, name);
538 if (IS_ERR(sc->clk_bus[ptr]))
539 continue;
540
541 clks++;
542 sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
543
544 dev_info(dev, "clock source %d: %s (%ld Hz)\n",
545 ptr, name, sc->clk_rates[ptr]);
546 }
547
548 if (clks == 0) {
549 dev_err(dev, "failed to find any bus clocks\n");
550 ret = -ENOENT;
551 goto err_no_busclks;
552 }
553
554 host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
555 if (IS_ERR(host->ioaddr)) {
556 ret = PTR_ERR(host->ioaddr);
557 goto err_req_regs;
558 }
559
560 /* Ensure we have minimal gpio selected CMD/CLK/Detect */
561 if (pdata->cfg_gpio)
562 pdata->cfg_gpio(pdev, pdata->max_width);
563
564 host->hw_name = "samsung-hsmmc";
565 host->ops = &sdhci_s3c_ops;
566 host->quirks = 0;
567 host->quirks2 = 0;
568 host->irq = irq;
569
570 /* Setup quirks for the controller */
571 host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
572 host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
573 if (drv_data) {
574 host->quirks |= drv_data->sdhci_quirks;
575 sc->no_divider = drv_data->no_divider;
576 }
577
578#ifndef CONFIG_MMC_SDHCI_S3C_DMA
579
580 /* we currently see overruns on errors, so disable the SDMA
581 * support as well. */
582 host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
583
584#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
585
586 /* It seems we do not get an DATA transfer complete on non-busy
587 * transfers, not sure if this is a problem with this specific
588 * SDHCI block, or a missing configuration that needs to be set. */
589 host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
590
591 /* This host supports the Auto CMD12 */
592 host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
593
594 /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
595 host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
596
597 if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
598 pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
599 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
600
601 if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
602 host->mmc->caps = MMC_CAP_NONREMOVABLE;
603
604 switch (pdata->max_width) {
605 case 8:
606 host->mmc->caps |= MMC_CAP_8_BIT_DATA;
607 fallthrough;
608 case 4:
609 host->mmc->caps |= MMC_CAP_4_BIT_DATA;
610 break;
611 }
612
613 if (pdata->pm_caps)
614 host->mmc->pm_caps |= pdata->pm_caps;
615
616 host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
617 SDHCI_QUIRK_32BIT_DMA_SIZE);
618
619 /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
620 host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
621
622 /*
623 * If controller does not have internal clock divider,
624 * we can use overriding functions instead of default.
625 */
626 if (sc->no_divider) {
627 sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
628 sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
629 sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
630 }
631
632 /* It supports additional host capabilities if needed */
633 if (pdata->host_caps)
634 host->mmc->caps |= pdata->host_caps;
635
636 if (pdata->host_caps2)
637 host->mmc->caps2 |= pdata->host_caps2;
638
639 pm_runtime_enable(&pdev->dev);
640 pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
641 pm_runtime_use_autosuspend(&pdev->dev);
642 pm_suspend_ignore_children(&pdev->dev, 1);
643
644 ret = mmc_of_parse(host->mmc);
645 if (ret)
646 goto err_req_regs;
647
648 ret = sdhci_add_host(host);
649 if (ret)
650 goto err_req_regs;
651
652#ifdef CONFIG_PM
653 if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
654 clk_disable_unprepare(sc->clk_io);
655#endif
656 return 0;
657
658 err_req_regs:
659 pm_runtime_disable(&pdev->dev);
660
661 err_no_busclks:
662 clk_disable_unprepare(sc->clk_io);
663
664 err_pdata_io_clk:
665 sdhci_free_host(host);
666
667 return ret;
668}
669
670static void sdhci_s3c_remove(struct platform_device *pdev)
671{
672 struct sdhci_host *host = platform_get_drvdata(pdev);
673 struct sdhci_s3c *sc = sdhci_priv(host);
674
675 if (sc->ext_cd_irq)
676 free_irq(sc->ext_cd_irq, sc);
677
678#ifdef CONFIG_PM
679 if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
680 clk_prepare_enable(sc->clk_io);
681#endif
682 sdhci_remove_host(host, 1);
683
684 pm_runtime_dont_use_autosuspend(&pdev->dev);
685 pm_runtime_disable(&pdev->dev);
686
687 clk_disable_unprepare(sc->clk_io);
688
689 sdhci_free_host(host);
690}
691
692#ifdef CONFIG_PM_SLEEP
693static int sdhci_s3c_suspend(struct device *dev)
694{
695 struct sdhci_host *host = dev_get_drvdata(dev);
696
697 if (host->tuning_mode != SDHCI_TUNING_MODE_3)
698 mmc_retune_needed(host->mmc);
699
700 return sdhci_suspend_host(host);
701}
702
703static int sdhci_s3c_resume(struct device *dev)
704{
705 struct sdhci_host *host = dev_get_drvdata(dev);
706
707 return sdhci_resume_host(host);
708}
709#endif
710
711#ifdef CONFIG_PM
712static int sdhci_s3c_runtime_suspend(struct device *dev)
713{
714 struct sdhci_host *host = dev_get_drvdata(dev);
715 struct sdhci_s3c *ourhost = to_s3c(host);
716 struct clk *busclk = ourhost->clk_io;
717 int ret;
718
719 ret = sdhci_runtime_suspend_host(host);
720
721 if (host->tuning_mode != SDHCI_TUNING_MODE_3)
722 mmc_retune_needed(host->mmc);
723
724 if (ourhost->cur_clk >= 0)
725 clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
726 clk_disable_unprepare(busclk);
727 return ret;
728}
729
730static int sdhci_s3c_runtime_resume(struct device *dev)
731{
732 struct sdhci_host *host = dev_get_drvdata(dev);
733 struct sdhci_s3c *ourhost = to_s3c(host);
734 struct clk *busclk = ourhost->clk_io;
735 int ret;
736
737 clk_prepare_enable(busclk);
738 if (ourhost->cur_clk >= 0)
739 clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
740 ret = sdhci_runtime_resume_host(host, 0);
741 return ret;
742}
743#endif
744
745static const struct dev_pm_ops sdhci_s3c_pmops = {
746 SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
747 SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
748 NULL)
749};
750
751static const struct platform_device_id sdhci_s3c_driver_ids[] = {
752 {
753 .name = "s3c-sdhci",
754 .driver_data = (kernel_ulong_t)NULL,
755 },
756 { }
757};
758MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
759
760#ifdef CONFIG_OF
761static const struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
762 .no_divider = true,
763};
764
765static const struct of_device_id sdhci_s3c_dt_match[] = {
766 { .compatible = "samsung,s3c6410-sdhci", },
767 { .compatible = "samsung,exynos4210-sdhci",
768 .data = &exynos4_sdhci_drv_data },
769 {},
770};
771MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
772#endif
773
774static struct platform_driver sdhci_s3c_driver = {
775 .probe = sdhci_s3c_probe,
776 .remove_new = sdhci_s3c_remove,
777 .id_table = sdhci_s3c_driver_ids,
778 .driver = {
779 .name = "s3c-sdhci",
780 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
781 .of_match_table = of_match_ptr(sdhci_s3c_dt_match),
782 .pm = &sdhci_s3c_pmops,
783 },
784};
785
786module_platform_driver(sdhci_s3c_driver);
787
788MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
789MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
790MODULE_LICENSE("GPL v2");