Loading...
1/*
2 * MicroTouch (3M) serial touchscreen driver
3 *
4 * Copyright (c) 2004 Vojtech Pavlik
5 */
6
7/*
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published by
10 * the Free Software Foundation.
11 */
12
13/*
14 * 2005/02/19 Dan Streetman <ddstreet@ieee.org>
15 * Copied elo.c and edited for MicroTouch protocol
16 */
17
18#include <linux/errno.h>
19#include <linux/kernel.h>
20#include <linux/module.h>
21#include <linux/slab.h>
22#include <linux/input.h>
23#include <linux/serio.h>
24#include <linux/init.h>
25
26#define DRIVER_DESC "MicroTouch serial touchscreen driver"
27
28MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
29MODULE_DESCRIPTION(DRIVER_DESC);
30MODULE_LICENSE("GPL");
31
32/*
33 * Definitions & global arrays.
34 */
35
36#define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80
37#define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40
38#define MTOUCH_FORMAT_TABLET_LENGTH 5
39#define MTOUCH_RESPONSE_BEGIN_BYTE 0x01
40#define MTOUCH_RESPONSE_END_BYTE 0x0d
41
42/* todo: check specs for max length of all responses */
43#define MTOUCH_MAX_LENGTH 16
44
45#define MTOUCH_MIN_XC 0
46#define MTOUCH_MAX_XC 0x3fff
47#define MTOUCH_MIN_YC 0
48#define MTOUCH_MAX_YC 0x3fff
49
50#define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1])
51#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3])
52#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])
53
54/*
55 * Per-touchscreen data.
56 */
57
58struct mtouch {
59 struct input_dev *dev;
60 struct serio *serio;
61 int idx;
62 unsigned char data[MTOUCH_MAX_LENGTH];
63 char phys[32];
64};
65
66static void mtouch_process_format_tablet(struct mtouch *mtouch)
67{
68 struct input_dev *dev = mtouch->dev;
69
70 if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) {
71 input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data));
72 input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data));
73 input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data));
74 input_sync(dev);
75
76 mtouch->idx = 0;
77 }
78}
79
80static void mtouch_process_response(struct mtouch *mtouch)
81{
82 if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) {
83 /* FIXME - process response */
84 mtouch->idx = 0;
85 } else if (MTOUCH_MAX_LENGTH == mtouch->idx) {
86 printk(KERN_ERR "mtouch.c: too many response bytes\n");
87 mtouch->idx = 0;
88 }
89}
90
91static irqreturn_t mtouch_interrupt(struct serio *serio,
92 unsigned char data, unsigned int flags)
93{
94 struct mtouch* mtouch = serio_get_drvdata(serio);
95
96 mtouch->data[mtouch->idx] = data;
97
98 if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0])
99 mtouch_process_format_tablet(mtouch);
100 else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0])
101 mtouch_process_response(mtouch);
102 else
103 printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]);
104
105 return IRQ_HANDLED;
106}
107
108/*
109 * mtouch_disconnect() is the opposite of mtouch_connect()
110 */
111
112static void mtouch_disconnect(struct serio *serio)
113{
114 struct mtouch* mtouch = serio_get_drvdata(serio);
115
116 input_get_device(mtouch->dev);
117 input_unregister_device(mtouch->dev);
118 serio_close(serio);
119 serio_set_drvdata(serio, NULL);
120 input_put_device(mtouch->dev);
121 kfree(mtouch);
122}
123
124/*
125 * mtouch_connect() is the routine that is called when someone adds a
126 * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as
127 * an input device.
128 */
129
130static int mtouch_connect(struct serio *serio, struct serio_driver *drv)
131{
132 struct mtouch *mtouch;
133 struct input_dev *input_dev;
134 int err;
135
136 mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL);
137 input_dev = input_allocate_device();
138 if (!mtouch || !input_dev) {
139 err = -ENOMEM;
140 goto fail1;
141 }
142
143 mtouch->serio = serio;
144 mtouch->dev = input_dev;
145 snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys);
146
147 input_dev->name = "MicroTouch Serial TouchScreen";
148 input_dev->phys = mtouch->phys;
149 input_dev->id.bustype = BUS_RS232;
150 input_dev->id.vendor = SERIO_MICROTOUCH;
151 input_dev->id.product = 0;
152 input_dev->id.version = 0x0100;
153 input_dev->dev.parent = &serio->dev;
154 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
155 input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
156 input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
157 input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
158
159 serio_set_drvdata(serio, mtouch);
160
161 err = serio_open(serio, drv);
162 if (err)
163 goto fail2;
164
165 err = input_register_device(mtouch->dev);
166 if (err)
167 goto fail3;
168
169 return 0;
170
171 fail3: serio_close(serio);
172 fail2: serio_set_drvdata(serio, NULL);
173 fail1: input_free_device(input_dev);
174 kfree(mtouch);
175 return err;
176}
177
178/*
179 * The serio driver structure.
180 */
181
182static struct serio_device_id mtouch_serio_ids[] = {
183 {
184 .type = SERIO_RS232,
185 .proto = SERIO_MICROTOUCH,
186 .id = SERIO_ANY,
187 .extra = SERIO_ANY,
188 },
189 { 0 }
190};
191
192MODULE_DEVICE_TABLE(serio, mtouch_serio_ids);
193
194static struct serio_driver mtouch_drv = {
195 .driver = {
196 .name = "mtouch",
197 },
198 .description = DRIVER_DESC,
199 .id_table = mtouch_serio_ids,
200 .interrupt = mtouch_interrupt,
201 .connect = mtouch_connect,
202 .disconnect = mtouch_disconnect,
203};
204
205/*
206 * The functions for inserting/removing us as a module.
207 */
208
209static int __init mtouch_init(void)
210{
211 return serio_register_driver(&mtouch_drv);
212}
213
214static void __exit mtouch_exit(void)
215{
216 serio_unregister_driver(&mtouch_drv);
217}
218
219module_init(mtouch_init);
220module_exit(mtouch_exit);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * MicroTouch (3M) serial touchscreen driver
4 *
5 * Copyright (c) 2004 Vojtech Pavlik
6 */
7
8
9/*
10 * 2005/02/19 Dan Streetman <ddstreet@ieee.org>
11 * Copied elo.c and edited for MicroTouch protocol
12 */
13
14#include <linux/errno.h>
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/slab.h>
18#include <linux/input.h>
19#include <linux/serio.h>
20
21#define DRIVER_DESC "MicroTouch serial touchscreen driver"
22
23MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
24MODULE_DESCRIPTION(DRIVER_DESC);
25MODULE_LICENSE("GPL");
26
27/*
28 * Definitions & global arrays.
29 */
30
31#define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80
32#define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40
33#define MTOUCH_FORMAT_TABLET_LENGTH 5
34#define MTOUCH_RESPONSE_BEGIN_BYTE 0x01
35#define MTOUCH_RESPONSE_END_BYTE 0x0d
36
37/* todo: check specs for max length of all responses */
38#define MTOUCH_MAX_LENGTH 16
39
40#define MTOUCH_MIN_XC 0
41#define MTOUCH_MAX_XC 0x3fff
42#define MTOUCH_MIN_YC 0
43#define MTOUCH_MAX_YC 0x3fff
44
45#define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1])
46#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3])
47#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])
48
49/*
50 * Per-touchscreen data.
51 */
52
53struct mtouch {
54 struct input_dev *dev;
55 struct serio *serio;
56 int idx;
57 unsigned char data[MTOUCH_MAX_LENGTH];
58 char phys[32];
59};
60
61static void mtouch_process_format_tablet(struct mtouch *mtouch)
62{
63 struct input_dev *dev = mtouch->dev;
64
65 if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) {
66 input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data));
67 input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data));
68 input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data));
69 input_sync(dev);
70
71 mtouch->idx = 0;
72 }
73}
74
75static void mtouch_process_response(struct mtouch *mtouch)
76{
77 if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) {
78 /* FIXME - process response */
79 mtouch->idx = 0;
80 } else if (MTOUCH_MAX_LENGTH == mtouch->idx) {
81 printk(KERN_ERR "mtouch.c: too many response bytes\n");
82 mtouch->idx = 0;
83 }
84}
85
86static irqreturn_t mtouch_interrupt(struct serio *serio,
87 unsigned char data, unsigned int flags)
88{
89 struct mtouch *mtouch = serio_get_drvdata(serio);
90
91 mtouch->data[mtouch->idx] = data;
92
93 if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0])
94 mtouch_process_format_tablet(mtouch);
95 else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0])
96 mtouch_process_response(mtouch);
97 else
98 printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]);
99
100 return IRQ_HANDLED;
101}
102
103/*
104 * mtouch_disconnect() is the opposite of mtouch_connect()
105 */
106
107static void mtouch_disconnect(struct serio *serio)
108{
109 struct mtouch *mtouch = serio_get_drvdata(serio);
110
111 input_get_device(mtouch->dev);
112 input_unregister_device(mtouch->dev);
113 serio_close(serio);
114 serio_set_drvdata(serio, NULL);
115 input_put_device(mtouch->dev);
116 kfree(mtouch);
117}
118
119/*
120 * mtouch_connect() is the routine that is called when someone adds a
121 * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as
122 * an input device.
123 */
124
125static int mtouch_connect(struct serio *serio, struct serio_driver *drv)
126{
127 struct mtouch *mtouch;
128 struct input_dev *input_dev;
129 int err;
130
131 mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL);
132 input_dev = input_allocate_device();
133 if (!mtouch || !input_dev) {
134 err = -ENOMEM;
135 goto fail1;
136 }
137
138 mtouch->serio = serio;
139 mtouch->dev = input_dev;
140 snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys);
141
142 input_dev->name = "MicroTouch Serial TouchScreen";
143 input_dev->phys = mtouch->phys;
144 input_dev->id.bustype = BUS_RS232;
145 input_dev->id.vendor = SERIO_MICROTOUCH;
146 input_dev->id.product = 0;
147 input_dev->id.version = 0x0100;
148 input_dev->dev.parent = &serio->dev;
149 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
150 input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
151 input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
152 input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
153
154 serio_set_drvdata(serio, mtouch);
155
156 err = serio_open(serio, drv);
157 if (err)
158 goto fail2;
159
160 err = input_register_device(mtouch->dev);
161 if (err)
162 goto fail3;
163
164 return 0;
165
166 fail3: serio_close(serio);
167 fail2: serio_set_drvdata(serio, NULL);
168 fail1: input_free_device(input_dev);
169 kfree(mtouch);
170 return err;
171}
172
173/*
174 * The serio driver structure.
175 */
176
177static const struct serio_device_id mtouch_serio_ids[] = {
178 {
179 .type = SERIO_RS232,
180 .proto = SERIO_MICROTOUCH,
181 .id = SERIO_ANY,
182 .extra = SERIO_ANY,
183 },
184 { 0 }
185};
186
187MODULE_DEVICE_TABLE(serio, mtouch_serio_ids);
188
189static struct serio_driver mtouch_drv = {
190 .driver = {
191 .name = "mtouch",
192 },
193 .description = DRIVER_DESC,
194 .id_table = mtouch_serio_ids,
195 .interrupt = mtouch_interrupt,
196 .connect = mtouch_connect,
197 .disconnect = mtouch_disconnect,
198};
199
200module_serio_driver(mtouch_drv);