1// SPDX-License-Identifier: GPL-2.0+
  2/*
  3 * LCD-OLinuXino support for panel driver
  4 *
  5 * Copyright (C) 2018 Olimex Ltd.
  6 *   Author: Stefan Mavrodiev <stefan@olimex.com>
  7 */
  8
  9#include <linux/crc32.h>
 10#include <linux/gpio/consumer.h>
 11#include <linux/i2c.h>
 12#include <linux/module.h>
 13#include <linux/mutex.h>
 14#include <linux/of.h>
 15#include <linux/regulator/consumer.h>
 16
 17#include <video/videomode.h>
 18#include <video/display_timing.h>
 19
 20#include <drm/drm_device.h>
 21#include <drm/drm_modes.h>
 22#include <drm/drm_panel.h>
 23
 24#define LCD_OLINUXINO_HEADER_MAGIC	0x4F4CB727
 25#define LCD_OLINUXINO_DATA_LEN		256
 26
 27struct lcd_olinuxino_mode {
 28	u32 pixelclock;
 29	u32 hactive;
 30	u32 hfp;
 31	u32 hbp;
 32	u32 hpw;
 33	u32 vactive;
 34	u32 vfp;
 35	u32 vbp;
 36	u32 vpw;
 37	u32 refresh;
 38	u32 flags;
 39};
 40
 41struct lcd_olinuxino_info {
 42	char name[32];
 43	u32 width_mm;
 44	u32 height_mm;
 45	u32 bpc;
 46	u32 bus_format;
 47	u32 bus_flag;
 48} __attribute__((__packed__));
 49
 50struct lcd_olinuxino_eeprom {
 51	u32 header;
 52	u32 id;
 53	char revision[4];
 54	u32 serial;
 55	struct lcd_olinuxino_info info;
 56	u32 num_modes;
 57	u8 reserved[180];
 58	u32 checksum;
 59} __attribute__((__packed__));
 60
 61struct lcd_olinuxino {
 62	struct drm_panel panel;
 63	struct device *dev;
 64	struct i2c_client *client;
 65	struct mutex mutex;
 66
 67	bool prepared;
 68	bool enabled;
 69
 70	struct regulator *supply;
 71	struct gpio_desc *enable_gpio;
 72
 73	struct lcd_olinuxino_eeprom eeprom;
 74};
 75
 76static inline struct lcd_olinuxino *to_lcd_olinuxino(struct drm_panel *panel)
 77{
 78	return container_of(panel, struct lcd_olinuxino, panel);
 79}
 80
 81static int lcd_olinuxino_disable(struct drm_panel *panel)
 82{
 83	struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
 84
 85	if (!lcd->enabled)
 86		return 0;
 87
 88	lcd->enabled = false;
 89
 90	return 0;
 91}
 92
 93static int lcd_olinuxino_unprepare(struct drm_panel *panel)
 94{
 95	struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
 96
 97	if (!lcd->prepared)
 98		return 0;
 99
100	gpiod_set_value_cansleep(lcd->enable_gpio, 0);
101	regulator_disable(lcd->supply);
102
103	lcd->prepared = false;
104
105	return 0;
106}
107
108static int lcd_olinuxino_prepare(struct drm_panel *panel)
109{
110	struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
111	int ret;
112
113	if (lcd->prepared)
114		return 0;
115
116	ret = regulator_enable(lcd->supply);
117	if (ret < 0)
118		return ret;
119
120	gpiod_set_value_cansleep(lcd->enable_gpio, 1);
121	lcd->prepared = true;
122
123	return 0;
124}
125
126static int lcd_olinuxino_enable(struct drm_panel *panel)
127{
128	struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
129
130	if (lcd->enabled)
131		return 0;
132
133	lcd->enabled = true;
134
135	return 0;
136}
137
138static int lcd_olinuxino_get_modes(struct drm_panel *panel,
139				   struct drm_connector *connector)
140{
141	struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
142	struct lcd_olinuxino_info *lcd_info = &lcd->eeprom.info;
143	struct lcd_olinuxino_mode *lcd_mode;
144	struct drm_display_mode *mode;
145	u32 i, num = 0;
146
147	for (i = 0; i < lcd->eeprom.num_modes; i++) {
148		lcd_mode = (struct lcd_olinuxino_mode *)
149			   &lcd->eeprom.reserved[i * sizeof(*lcd_mode)];
150
151		mode = drm_mode_create(connector->dev);
152		if (!mode) {
153			dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
154				lcd_mode->hactive,
155				lcd_mode->vactive,
156				lcd_mode->refresh);
157			continue;
158		}
159
160		mode->clock = lcd_mode->pixelclock;
161		mode->hdisplay = lcd_mode->hactive;
162		mode->hsync_start = lcd_mode->hactive + lcd_mode->hfp;
163		mode->hsync_end = lcd_mode->hactive + lcd_mode->hfp +
164				  lcd_mode->hpw;
165		mode->htotal = lcd_mode->hactive + lcd_mode->hfp +
166			       lcd_mode->hpw + lcd_mode->hbp;
167		mode->vdisplay = lcd_mode->vactive;
168		mode->vsync_start = lcd_mode->vactive + lcd_mode->vfp;
169		mode->vsync_end = lcd_mode->vactive + lcd_mode->vfp +
170				  lcd_mode->vpw;
171		mode->vtotal = lcd_mode->vactive + lcd_mode->vfp +
172			       lcd_mode->vpw + lcd_mode->vbp;
173
174		/* Always make the first mode preferred */
175		if (i == 0)
176			mode->type |= DRM_MODE_TYPE_PREFERRED;
177		mode->type |= DRM_MODE_TYPE_DRIVER;
178
179		drm_mode_set_name(mode);
180		drm_mode_probed_add(connector, mode);
181
182		num++;
183	}
184
185	connector->display_info.width_mm = lcd_info->width_mm;
186	connector->display_info.height_mm = lcd_info->height_mm;
187	connector->display_info.bpc = lcd_info->bpc;
188
189	if (lcd_info->bus_format)
190		drm_display_info_set_bus_formats(&connector->display_info,
191						 &lcd_info->bus_format, 1);
192	connector->display_info.bus_flags = lcd_info->bus_flag;
193
194	return num;
195}
196
197static const struct drm_panel_funcs lcd_olinuxino_funcs = {
198	.disable = lcd_olinuxino_disable,
199	.unprepare = lcd_olinuxino_unprepare,
200	.prepare = lcd_olinuxino_prepare,
201	.enable = lcd_olinuxino_enable,
202	.get_modes = lcd_olinuxino_get_modes,
203};
204
205static int lcd_olinuxino_probe(struct i2c_client *client)
206{
207	struct device *dev = &client->dev;
208	struct lcd_olinuxino *lcd;
209	u32 checksum, i;
210	int ret = 0;
211
212	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
213				     I2C_FUNC_SMBUS_READ_I2C_BLOCK))
214		return -ENODEV;
215
216	lcd = devm_kzalloc(dev, sizeof(*lcd), GFP_KERNEL);
217	if (!lcd)
218		return -ENOMEM;
219
220	i2c_set_clientdata(client, lcd);
221	lcd->dev = dev;
222	lcd->client = client;
223
224	mutex_init(&lcd->mutex);
225
226	/* Copy data into buffer */
227	for (i = 0; i < LCD_OLINUXINO_DATA_LEN; i += I2C_SMBUS_BLOCK_MAX) {
228		mutex_lock(&lcd->mutex);
229		ret = i2c_smbus_read_i2c_block_data(client,
230						    i,
231						    I2C_SMBUS_BLOCK_MAX,
232						    (u8 *)&lcd->eeprom + i);
233		mutex_unlock(&lcd->mutex);
234		if (ret < 0) {
235			dev_err(dev, "error reading from device at %02x\n", i);
236			return ret;
237		}
238	}
239
240	/* Check configuration checksum */
241	checksum = ~crc32(~0, (u8 *)&lcd->eeprom, 252);
242	if (checksum != lcd->eeprom.checksum) {
243		dev_err(dev, "configuration checksum does not match!\n");
244		return -EINVAL;
245	}
246
247	/* Check magic header */
248	if (lcd->eeprom.header != LCD_OLINUXINO_HEADER_MAGIC) {
249		dev_err(dev, "magic header does not match\n");
250		return -EINVAL;
251	}
252
253	dev_info(dev, "Detected %s, Rev. %s, Serial: %08x\n",
254		 lcd->eeprom.info.name,
255		 lcd->eeprom.revision,
256		 lcd->eeprom.serial);
257
258	/*
259	 * The eeprom can hold up to 4 modes.
260	 * If the stored value is bigger, overwrite it.
261	 */
262	if (lcd->eeprom.num_modes > 4) {
263		dev_warn(dev, "invalid number of modes, falling back to 4\n");
264		lcd->eeprom.num_modes = 4;
265	}
266
267	lcd->enabled = false;
268	lcd->prepared = false;
269
270	lcd->supply = devm_regulator_get(dev, "power");
271	if (IS_ERR(lcd->supply))
272		return PTR_ERR(lcd->supply);
273
274	lcd->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
275	if (IS_ERR(lcd->enable_gpio))
276		return PTR_ERR(lcd->enable_gpio);
277
278	drm_panel_init(&lcd->panel, dev, &lcd_olinuxino_funcs,
279		       DRM_MODE_CONNECTOR_DPI);
280
281	ret = drm_panel_of_backlight(&lcd->panel);
282	if (ret)
283		return ret;
284
285	drm_panel_add(&lcd->panel);
286
287	return 0;
288}
289
290static void lcd_olinuxino_remove(struct i2c_client *client)
291{
292	struct lcd_olinuxino *panel = i2c_get_clientdata(client);
293
294	drm_panel_remove(&panel->panel);
295
296	drm_panel_disable(&panel->panel);
297	drm_panel_unprepare(&panel->panel);
298}
299
300static const struct of_device_id lcd_olinuxino_of_ids[] = {
301	{ .compatible = "olimex,lcd-olinuxino" },
302	{ }
303};
304MODULE_DEVICE_TABLE(of, lcd_olinuxino_of_ids);
305
306static struct i2c_driver lcd_olinuxino_driver = {
307	.driver = {
308		.name = "lcd_olinuxino",
309		.of_match_table = lcd_olinuxino_of_ids,
310	},
311	.probe = lcd_olinuxino_probe,
312	.remove = lcd_olinuxino_remove,
313};
314
315module_i2c_driver(lcd_olinuxino_driver);
316
317MODULE_AUTHOR("Stefan Mavrodiev <stefan@olimex.com>");
318MODULE_DESCRIPTION("LCD-OLinuXino driver");
319MODULE_LICENSE("GPL");