Loading...
1menu "CPU Frequency scaling"
2
3config CPU_FREQ
4 bool "CPU Frequency scaling"
5 help
6 CPU Frequency scaling allows you to change the clock speed of
7 CPUs on the fly. This is a nice method to save power, because
8 the lower the CPU clock speed, the less power the CPU consumes.
9
10 Note that this driver doesn't automatically change the CPU
11 clock speed, you need to either enable a dynamic cpufreq governor
12 (see below) after boot, or use a userspace tool.
13
14 For details, take a look at <file:Documentation/cpu-freq>.
15
16 If in doubt, say N.
17
18if CPU_FREQ
19
20config CPU_FREQ_TABLE
21 tristate
22
23config CPU_FREQ_STAT
24 tristate "CPU frequency translation statistics"
25 select CPU_FREQ_TABLE
26 default y
27 help
28 This driver exports CPU frequency statistics information through sysfs
29 file system.
30
31 To compile this driver as a module, choose M here: the
32 module will be called cpufreq_stats.
33
34 If in doubt, say N.
35
36config CPU_FREQ_STAT_DETAILS
37 bool "CPU frequency translation statistics details"
38 depends on CPU_FREQ_STAT
39 help
40 This will show detail CPU frequency translation table in sysfs file
41 system.
42
43 If in doubt, say N.
44
45choice
46 prompt "Default CPUFreq governor"
47 default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110
48 default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
49 help
50 This option sets which CPUFreq governor shall be loaded at
51 startup. If in doubt, select 'performance'.
52
53config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
54 bool "performance"
55 select CPU_FREQ_GOV_PERFORMANCE
56 help
57 Use the CPUFreq governor 'performance' as default. This sets
58 the frequency statically to the highest frequency supported by
59 the CPU.
60
61config CPU_FREQ_DEFAULT_GOV_POWERSAVE
62 bool "powersave"
63 depends on EXPERT
64 select CPU_FREQ_GOV_POWERSAVE
65 help
66 Use the CPUFreq governor 'powersave' as default. This sets
67 the frequency statically to the lowest frequency supported by
68 the CPU.
69
70config CPU_FREQ_DEFAULT_GOV_USERSPACE
71 bool "userspace"
72 select CPU_FREQ_GOV_USERSPACE
73 help
74 Use the CPUFreq governor 'userspace' as default. This allows
75 you to set the CPU frequency manually or when a userspace
76 program shall be able to set the CPU dynamically without having
77 to enable the userspace governor manually.
78
79config CPU_FREQ_DEFAULT_GOV_ONDEMAND
80 bool "ondemand"
81 select CPU_FREQ_GOV_ONDEMAND
82 select CPU_FREQ_GOV_PERFORMANCE
83 help
84 Use the CPUFreq governor 'ondemand' as default. This allows
85 you to get a full dynamic frequency capable system by simply
86 loading your cpufreq low-level hardware driver.
87 Be aware that not all cpufreq drivers support the ondemand
88 governor. If unsure have a look at the help section of the
89 driver. Fallback governor will be the performance governor.
90
91config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
92 bool "conservative"
93 select CPU_FREQ_GOV_CONSERVATIVE
94 select CPU_FREQ_GOV_PERFORMANCE
95 help
96 Use the CPUFreq governor 'conservative' as default. This allows
97 you to get a full dynamic frequency capable system by simply
98 loading your cpufreq low-level hardware driver.
99 Be aware that not all cpufreq drivers support the conservative
100 governor. If unsure have a look at the help section of the
101 driver. Fallback governor will be the performance governor.
102endchoice
103
104config CPU_FREQ_GOV_PERFORMANCE
105 tristate "'performance' governor"
106 help
107 This cpufreq governor sets the frequency statically to the
108 highest available CPU frequency.
109
110 To compile this driver as a module, choose M here: the
111 module will be called cpufreq_performance.
112
113 If in doubt, say Y.
114
115config CPU_FREQ_GOV_POWERSAVE
116 tristate "'powersave' governor"
117 help
118 This cpufreq governor sets the frequency statically to the
119 lowest available CPU frequency.
120
121 To compile this driver as a module, choose M here: the
122 module will be called cpufreq_powersave.
123
124 If in doubt, say Y.
125
126config CPU_FREQ_GOV_USERSPACE
127 tristate "'userspace' governor for userspace frequency scaling"
128 help
129 Enable this cpufreq governor when you either want to set the
130 CPU frequency manually or when a userspace program shall
131 be able to set the CPU dynamically, like on LART
132 <http://www.lartmaker.nl/>.
133
134 To compile this driver as a module, choose M here: the
135 module will be called cpufreq_userspace.
136
137 For details, take a look at <file:Documentation/cpu-freq/>.
138
139 If in doubt, say Y.
140
141config CPU_FREQ_GOV_ONDEMAND
142 tristate "'ondemand' cpufreq policy governor"
143 select CPU_FREQ_TABLE
144 help
145 'ondemand' - This driver adds a dynamic cpufreq policy governor.
146 The governor does a periodic polling and
147 changes frequency based on the CPU utilization.
148 The support for this governor depends on CPU capability to
149 do fast frequency switching (i.e, very low latency frequency
150 transitions).
151
152 To compile this driver as a module, choose M here: the
153 module will be called cpufreq_ondemand.
154
155 For details, take a look at linux/Documentation/cpu-freq.
156
157 If in doubt, say N.
158
159config CPU_FREQ_GOV_CONSERVATIVE
160 tristate "'conservative' cpufreq governor"
161 depends on CPU_FREQ
162 help
163 'conservative' - this driver is rather similar to the 'ondemand'
164 governor both in its source code and its purpose, the difference is
165 its optimisation for better suitability in a battery powered
166 environment. The frequency is gracefully increased and decreased
167 rather than jumping to 100% when speed is required.
168
169 If you have a desktop machine then you should really be considering
170 the 'ondemand' governor instead, however if you are using a laptop,
171 PDA or even an AMD64 based computer (due to the unacceptable
172 step-by-step latency issues between the minimum and maximum frequency
173 transitions in the CPU) you will probably want to use this governor.
174
175 To compile this driver as a module, choose M here: the
176 module will be called cpufreq_conservative.
177
178 For details, take a look at linux/Documentation/cpu-freq.
179
180 If in doubt, say N.
181
182menu "x86 CPU frequency scaling drivers"
183depends on X86
184source "drivers/cpufreq/Kconfig.x86"
185endmenu
186
187menu "ARM CPU frequency scaling drivers"
188depends on ARM
189source "drivers/cpufreq/Kconfig.arm"
190endmenu
191
192menu "PowerPC CPU frequency scaling drivers"
193depends on PPC32 || PPC64
194source "drivers/cpufreq/Kconfig.powerpc"
195endmenu
196
197endif
198endmenu
1# SPDX-License-Identifier: GPL-2.0-only
2menu "CPU Frequency scaling"
3
4config CPU_FREQ
5 bool "CPU Frequency scaling"
6 help
7 CPU Frequency scaling allows you to change the clock speed of
8 CPUs on the fly. This is a nice method to save power, because
9 the lower the CPU clock speed, the less power the CPU consumes.
10
11 Note that this driver doesn't automatically change the CPU
12 clock speed, you need to either enable a dynamic cpufreq governor
13 (see below) after boot, or use a userspace tool.
14
15 For details, take a look at
16 <file:Documentation/admin-guide/pm/cpufreq.rst>.
17
18 If in doubt, say N.
19
20if CPU_FREQ
21
22config CPU_FREQ_GOV_ATTR_SET
23 bool
24
25config CPU_FREQ_GOV_COMMON
26 select CPU_FREQ_GOV_ATTR_SET
27 select IRQ_WORK
28 bool
29
30config CPU_FREQ_STAT
31 bool "CPU frequency transition statistics"
32 help
33 Export CPU frequency statistics information through sysfs.
34
35 If in doubt, say N.
36
37choice
38 prompt "Default CPUFreq governor"
39 default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1110_CPUFREQ
40 default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if ARM64 || ARM
41 default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if (X86_INTEL_PSTATE || X86_AMD_PSTATE) && SMP
42 default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
43 help
44 This option sets which CPUFreq governor shall be loaded at
45 startup. If in doubt, use the default setting.
46
47config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
48 bool "performance"
49 select CPU_FREQ_GOV_PERFORMANCE
50 help
51 Use the CPUFreq governor 'performance' as default. This sets
52 the frequency statically to the highest frequency supported by
53 the CPU.
54
55config CPU_FREQ_DEFAULT_GOV_POWERSAVE
56 bool "powersave"
57 select CPU_FREQ_GOV_POWERSAVE
58 help
59 Use the CPUFreq governor 'powersave' as default. This sets
60 the frequency statically to the lowest frequency supported by
61 the CPU.
62
63config CPU_FREQ_DEFAULT_GOV_USERSPACE
64 bool "userspace"
65 select CPU_FREQ_GOV_USERSPACE
66 help
67 Use the CPUFreq governor 'userspace' as default. This allows
68 you to set the CPU frequency manually or when a userspace
69 program shall be able to set the CPU dynamically without having
70 to enable the userspace governor manually.
71
72config CPU_FREQ_DEFAULT_GOV_ONDEMAND
73 bool "ondemand"
74 depends on !(X86_INTEL_PSTATE && SMP)
75 select CPU_FREQ_GOV_ONDEMAND
76 select CPU_FREQ_GOV_PERFORMANCE
77 help
78 Use the CPUFreq governor 'ondemand' as default. This allows
79 you to get a full dynamic frequency capable system by simply
80 loading your cpufreq low-level hardware driver.
81 Be aware that not all cpufreq drivers support the ondemand
82 governor. If unsure have a look at the help section of the
83 driver. Fallback governor will be the performance governor.
84
85config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
86 bool "conservative"
87 depends on !(X86_INTEL_PSTATE && SMP)
88 select CPU_FREQ_GOV_CONSERVATIVE
89 select CPU_FREQ_GOV_PERFORMANCE
90 help
91 Use the CPUFreq governor 'conservative' as default. This allows
92 you to get a full dynamic frequency capable system by simply
93 loading your cpufreq low-level hardware driver.
94 Be aware that not all cpufreq drivers support the conservative
95 governor. If unsure have a look at the help section of the
96 driver. Fallback governor will be the performance governor.
97
98config CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
99 bool "schedutil"
100 depends on SMP
101 select CPU_FREQ_GOV_SCHEDUTIL
102 select CPU_FREQ_GOV_PERFORMANCE
103 help
104 Use the 'schedutil' CPUFreq governor by default. If unsure,
105 have a look at the help section of that governor. The fallback
106 governor will be 'performance'.
107
108endchoice
109
110config CPU_FREQ_GOV_PERFORMANCE
111 tristate "'performance' governor"
112 help
113 This cpufreq governor sets the frequency statically to the
114 highest available CPU frequency.
115
116 To compile this driver as a module, choose M here: the
117 module will be called cpufreq_performance.
118
119 If in doubt, say Y.
120
121config CPU_FREQ_GOV_POWERSAVE
122 tristate "'powersave' governor"
123 help
124 This cpufreq governor sets the frequency statically to the
125 lowest available CPU frequency.
126
127 To compile this driver as a module, choose M here: the
128 module will be called cpufreq_powersave.
129
130 If in doubt, say Y.
131
132config CPU_FREQ_GOV_USERSPACE
133 tristate "'userspace' governor for userspace frequency scaling"
134 help
135 Enable this cpufreq governor when you either want to set the
136 CPU frequency manually or when a userspace program shall
137 be able to set the CPU dynamically, like on LART
138 <http://www.lartmaker.nl/>.
139
140 To compile this driver as a module, choose M here: the
141 module will be called cpufreq_userspace.
142
143 If in doubt, say Y.
144
145config CPU_FREQ_GOV_ONDEMAND
146 tristate "'ondemand' cpufreq policy governor"
147 select CPU_FREQ_GOV_COMMON
148 help
149 'ondemand' - This driver adds a dynamic cpufreq policy governor.
150 The governor does a periodic polling and
151 changes frequency based on the CPU utilization.
152 The support for this governor depends on CPU capability to
153 do fast frequency switching (i.e, very low latency frequency
154 transitions).
155
156 To compile this driver as a module, choose M here: the
157 module will be called cpufreq_ondemand.
158
159 For details, take a look at
160 <file:Documentation/admin-guide/pm/cpufreq.rst>.
161
162 If in doubt, say N.
163
164config CPU_FREQ_GOV_CONSERVATIVE
165 tristate "'conservative' cpufreq governor"
166 depends on CPU_FREQ
167 select CPU_FREQ_GOV_COMMON
168 help
169 'conservative' - this driver is rather similar to the 'ondemand'
170 governor both in its source code and its purpose, the difference is
171 its optimisation for better suitability in a battery powered
172 environment. The frequency is gracefully increased and decreased
173 rather than jumping to 100% when speed is required.
174
175 If you have a desktop machine then you should really be considering
176 the 'ondemand' governor instead, however if you are using a laptop,
177 PDA or even an AMD64 based computer (due to the unacceptable
178 step-by-step latency issues between the minimum and maximum frequency
179 transitions in the CPU) you will probably want to use this governor.
180
181 To compile this driver as a module, choose M here: the
182 module will be called cpufreq_conservative.
183
184 For details, take a look at
185 <file:Documentation/admin-guide/pm/cpufreq.rst>.
186
187 If in doubt, say N.
188
189config CPU_FREQ_GOV_SCHEDUTIL
190 bool "'schedutil' cpufreq policy governor"
191 depends on CPU_FREQ && SMP
192 select CPU_FREQ_GOV_ATTR_SET
193 select IRQ_WORK
194 help
195 This governor makes decisions based on the utilization data provided
196 by the scheduler. It sets the CPU frequency to be proportional to
197 the utilization/capacity ratio coming from the scheduler. If the
198 utilization is frequency-invariant, the new frequency is also
199 proportional to the maximum available frequency. If that is not the
200 case, it is proportional to the current frequency of the CPU. The
201 frequency tipping point is at utilization/capacity equal to 80% in
202 both cases.
203
204 If in doubt, say N.
205
206comment "CPU frequency scaling drivers"
207
208config CPUFREQ_DT
209 tristate "Generic DT based cpufreq driver"
210 depends on HAVE_CLK && OF
211 select CPUFREQ_DT_PLATDEV
212 select PM_OPP
213 help
214 This adds a generic DT based cpufreq driver for frequency management.
215 It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
216 systems.
217
218 If in doubt, say N.
219
220config CPUFREQ_DT_PLATDEV
221 tristate "Generic DT based cpufreq platdev driver"
222 depends on OF
223 help
224 This adds a generic DT based cpufreq platdev driver for frequency
225 management. This creates a 'cpufreq-dt' platform device, on the
226 supported platforms.
227
228 If in doubt, say N.
229
230if X86
231source "drivers/cpufreq/Kconfig.x86"
232endif
233
234if ARM || ARM64
235source "drivers/cpufreq/Kconfig.arm"
236endif
237
238if PPC32 || PPC64
239source "drivers/cpufreq/Kconfig.powerpc"
240endif
241
242if MIPS
243config BMIPS_CPUFREQ
244 tristate "BMIPS CPUfreq Driver"
245 help
246 This option adds a CPUfreq driver for BMIPS processors with
247 support for configurable CPU frequency.
248
249 For now, BMIPS5 chips are supported (such as the Broadcom 7425).
250
251 If in doubt, say N.
252
253config LOONGSON2_CPUFREQ
254 tristate "Loongson2 CPUFreq Driver"
255 depends on LEMOTE_MACH2F
256 help
257 This option adds a CPUFreq driver for loongson processors which
258 support software configurable cpu frequency.
259
260 Loongson2F and its successors support this feature.
261
262 If in doubt, say N.
263endif
264
265if SPARC64
266config SPARC_US3_CPUFREQ
267 tristate "UltraSPARC-III CPU Frequency driver"
268 help
269 This adds the CPUFreq driver for UltraSPARC-III processors.
270
271 If in doubt, say N.
272
273config SPARC_US2E_CPUFREQ
274 tristate "UltraSPARC-IIe CPU Frequency driver"
275 help
276 This adds the CPUFreq driver for UltraSPARC-IIe processors.
277
278 If in doubt, say N.
279endif
280
281if SUPERH
282config SH_CPU_FREQ
283 tristate "SuperH CPU Frequency driver"
284 help
285 This adds the cpufreq driver for SuperH. Any CPU that supports
286 clock rate rounding through the clock framework can use this
287 driver. While it will make the kernel slightly larger, this is
288 harmless for CPUs that don't support rate rounding. The driver
289 will also generate a notice in the boot log before disabling
290 itself if the CPU in question is not capable of rate rounding.
291
292 If unsure, say N.
293endif
294
295config QORIQ_CPUFREQ
296 tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
297 depends on OF && COMMON_CLK
298 depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
299 select CLK_QORIQ
300 help
301 This adds the CPUFreq driver support for Freescale QorIQ SoCs
302 which are capable of changing the CPU's frequency dynamically.
303
304endif
305endmenu