Loading...
1/******************************************************************************
2 *
3 * Module Name: dswload - Dispatcher first pass namespace load callbacks
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2011, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acparser.h"
47#include "amlcode.h"
48#include "acdispat.h"
49#include "acinterp.h"
50#include "acnamesp.h"
51
52#ifdef ACPI_ASL_COMPILER
53#include <acpi/acdisasm.h>
54#endif
55
56#define _COMPONENT ACPI_DISPATCHER
57ACPI_MODULE_NAME("dswload")
58
59/*******************************************************************************
60 *
61 * FUNCTION: acpi_ds_init_callbacks
62 *
63 * PARAMETERS: walk_state - Current state of the parse tree walk
64 * pass_number - 1, 2, or 3
65 *
66 * RETURN: Status
67 *
68 * DESCRIPTION: Init walk state callbacks
69 *
70 ******************************************************************************/
71acpi_status
72acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
73{
74
75 switch (pass_number) {
76 case 1:
77 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
78 ACPI_PARSE_DELETE_TREE;
79 walk_state->descending_callback = acpi_ds_load1_begin_op;
80 walk_state->ascending_callback = acpi_ds_load1_end_op;
81 break;
82
83 case 2:
84 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
85 ACPI_PARSE_DELETE_TREE;
86 walk_state->descending_callback = acpi_ds_load2_begin_op;
87 walk_state->ascending_callback = acpi_ds_load2_end_op;
88 break;
89
90 case 3:
91#ifndef ACPI_NO_METHOD_EXECUTION
92 walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
93 ACPI_PARSE_DELETE_TREE;
94 walk_state->descending_callback = acpi_ds_exec_begin_op;
95 walk_state->ascending_callback = acpi_ds_exec_end_op;
96#endif
97 break;
98
99 default:
100 return (AE_BAD_PARAMETER);
101 }
102
103 return (AE_OK);
104}
105
106/*******************************************************************************
107 *
108 * FUNCTION: acpi_ds_load1_begin_op
109 *
110 * PARAMETERS: walk_state - Current state of the parse tree walk
111 * out_op - Where to return op if a new one is created
112 *
113 * RETURN: Status
114 *
115 * DESCRIPTION: Descending callback used during the loading of ACPI tables.
116 *
117 ******************************************************************************/
118
119acpi_status
120acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
121 union acpi_parse_object ** out_op)
122{
123 union acpi_parse_object *op;
124 struct acpi_namespace_node *node;
125 acpi_status status;
126 acpi_object_type object_type;
127 char *path;
128 u32 flags;
129
130 ACPI_FUNCTION_TRACE(ds_load1_begin_op);
131
132 op = walk_state->op;
133 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
134 walk_state));
135
136 /* We are only interested in opcodes that have an associated name */
137
138 if (op) {
139 if (!(walk_state->op_info->flags & AML_NAMED)) {
140 *out_op = op;
141 return_ACPI_STATUS(AE_OK);
142 }
143
144 /* Check if this object has already been installed in the namespace */
145
146 if (op->common.node) {
147 *out_op = op;
148 return_ACPI_STATUS(AE_OK);
149 }
150 }
151
152 path = acpi_ps_get_next_namestring(&walk_state->parser_state);
153
154 /* Map the raw opcode into an internal object type */
155
156 object_type = walk_state->op_info->object_type;
157
158 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
159 "State=%p Op=%p [%s]\n", walk_state, op,
160 acpi_ut_get_type_name(object_type)));
161
162 switch (walk_state->opcode) {
163 case AML_SCOPE_OP:
164
165 /*
166 * The target name of the Scope() operator must exist at this point so
167 * that we can actually open the scope to enter new names underneath it.
168 * Allow search-to-root for single namesegs.
169 */
170 status =
171 acpi_ns_lookup(walk_state->scope_info, path, object_type,
172 ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
173 walk_state, &(node));
174#ifdef ACPI_ASL_COMPILER
175 if (status == AE_NOT_FOUND) {
176 /*
177 * Table disassembly:
178 * Target of Scope() not found. Generate an External for it, and
179 * insert the name into the namespace.
180 */
181 acpi_dm_add_to_external_list(path, ACPI_TYPE_DEVICE, 0);
182 status =
183 acpi_ns_lookup(walk_state->scope_info, path,
184 object_type, ACPI_IMODE_LOAD_PASS1,
185 ACPI_NS_SEARCH_PARENT, walk_state,
186 &node);
187 }
188#endif
189 if (ACPI_FAILURE(status)) {
190 ACPI_ERROR_NAMESPACE(path, status);
191 return_ACPI_STATUS(status);
192 }
193
194 /*
195 * Check to make sure that the target is
196 * one of the opcodes that actually opens a scope
197 */
198 switch (node->type) {
199 case ACPI_TYPE_ANY:
200 case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
201 case ACPI_TYPE_DEVICE:
202 case ACPI_TYPE_POWER:
203 case ACPI_TYPE_PROCESSOR:
204 case ACPI_TYPE_THERMAL:
205
206 /* These are acceptable types */
207 break;
208
209 case ACPI_TYPE_INTEGER:
210 case ACPI_TYPE_STRING:
211 case ACPI_TYPE_BUFFER:
212
213 /*
214 * These types we will allow, but we will change the type.
215 * This enables some existing code of the form:
216 *
217 * Name (DEB, 0)
218 * Scope (DEB) { ... }
219 *
220 * Note: silently change the type here. On the second pass,
221 * we will report a warning
222 */
223 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
224 "Type override - [%4.4s] had invalid type (%s) "
225 "for Scope operator, changed to type ANY\n",
226 acpi_ut_get_node_name(node),
227 acpi_ut_get_type_name(node->type)));
228
229 node->type = ACPI_TYPE_ANY;
230 walk_state->scope_info->common.value = ACPI_TYPE_ANY;
231 break;
232
233 default:
234
235 /* All other types are an error */
236
237 ACPI_ERROR((AE_INFO,
238 "Invalid type (%s) for target of "
239 "Scope operator [%4.4s] (Cannot override)",
240 acpi_ut_get_type_name(node->type),
241 acpi_ut_get_node_name(node)));
242
243 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
244 }
245 break;
246
247 default:
248 /*
249 * For all other named opcodes, we will enter the name into
250 * the namespace.
251 *
252 * Setup the search flags.
253 * Since we are entering a name into the namespace, we do not want to
254 * enable the search-to-root upsearch.
255 *
256 * There are only two conditions where it is acceptable that the name
257 * already exists:
258 * 1) the Scope() operator can reopen a scoping object that was
259 * previously defined (Scope, Method, Device, etc.)
260 * 2) Whenever we are parsing a deferred opcode (op_region, Buffer,
261 * buffer_field, or Package), the name of the object is already
262 * in the namespace.
263 */
264 if (walk_state->deferred_node) {
265
266 /* This name is already in the namespace, get the node */
267
268 node = walk_state->deferred_node;
269 status = AE_OK;
270 break;
271 }
272
273 /*
274 * If we are executing a method, do not create any namespace objects
275 * during the load phase, only during execution.
276 */
277 if (walk_state->method_node) {
278 node = NULL;
279 status = AE_OK;
280 break;
281 }
282
283 flags = ACPI_NS_NO_UPSEARCH;
284 if ((walk_state->opcode != AML_SCOPE_OP) &&
285 (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
286 flags |= ACPI_NS_ERROR_IF_FOUND;
287 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
288 "[%s] Cannot already exist\n",
289 acpi_ut_get_type_name(object_type)));
290 } else {
291 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
292 "[%s] Both Find or Create allowed\n",
293 acpi_ut_get_type_name(object_type)));
294 }
295
296 /*
297 * Enter the named type into the internal namespace. We enter the name
298 * as we go downward in the parse tree. Any necessary subobjects that
299 * involve arguments to the opcode must be created as we go back up the
300 * parse tree later.
301 */
302 status =
303 acpi_ns_lookup(walk_state->scope_info, path, object_type,
304 ACPI_IMODE_LOAD_PASS1, flags, walk_state,
305 &node);
306 if (ACPI_FAILURE(status)) {
307 if (status == AE_ALREADY_EXISTS) {
308
309 /* The name already exists in this scope */
310
311 if (node->flags & ANOBJ_IS_EXTERNAL) {
312 /*
313 * Allow one create on an object or segment that was
314 * previously declared External
315 */
316 node->flags &= ~ANOBJ_IS_EXTERNAL;
317 node->type = (u8) object_type;
318
319 /* Just retyped a node, probably will need to open a scope */
320
321 if (acpi_ns_opens_scope(object_type)) {
322 status =
323 acpi_ds_scope_stack_push
324 (node, object_type,
325 walk_state);
326 if (ACPI_FAILURE(status)) {
327 return_ACPI_STATUS
328 (status);
329 }
330 }
331
332 status = AE_OK;
333 }
334 }
335
336 if (ACPI_FAILURE(status)) {
337 ACPI_ERROR_NAMESPACE(path, status);
338 return_ACPI_STATUS(status);
339 }
340 }
341 break;
342 }
343
344 /* Common exit */
345
346 if (!op) {
347
348 /* Create a new op */
349
350 op = acpi_ps_alloc_op(walk_state->opcode);
351 if (!op) {
352 return_ACPI_STATUS(AE_NO_MEMORY);
353 }
354 }
355
356 /* Initialize the op */
357
358#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
359 op->named.path = ACPI_CAST_PTR(u8, path);
360#endif
361
362 if (node) {
363 /*
364 * Put the Node in the "op" object that the parser uses, so we
365 * can get it again quickly when this scope is closed
366 */
367 op->common.node = node;
368 op->named.name = node->name.integer;
369 }
370
371 acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
372 op);
373 *out_op = op;
374 return_ACPI_STATUS(status);
375}
376
377/*******************************************************************************
378 *
379 * FUNCTION: acpi_ds_load1_end_op
380 *
381 * PARAMETERS: walk_state - Current state of the parse tree walk
382 *
383 * RETURN: Status
384 *
385 * DESCRIPTION: Ascending callback used during the loading of the namespace,
386 * both control methods and everything else.
387 *
388 ******************************************************************************/
389
390acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
391{
392 union acpi_parse_object *op;
393 acpi_object_type object_type;
394 acpi_status status = AE_OK;
395
396 ACPI_FUNCTION_TRACE(ds_load1_end_op);
397
398 op = walk_state->op;
399 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
400 walk_state));
401
402 /* We are only interested in opcodes that have an associated name */
403
404 if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
405 return_ACPI_STATUS(AE_OK);
406 }
407
408 /* Get the object type to determine if we should pop the scope */
409
410 object_type = walk_state->op_info->object_type;
411
412#ifndef ACPI_NO_METHOD_EXECUTION
413 if (walk_state->op_info->flags & AML_FIELD) {
414 /*
415 * If we are executing a method, do not create any namespace objects
416 * during the load phase, only during execution.
417 */
418 if (!walk_state->method_node) {
419 if (walk_state->opcode == AML_FIELD_OP ||
420 walk_state->opcode == AML_BANK_FIELD_OP ||
421 walk_state->opcode == AML_INDEX_FIELD_OP) {
422 status =
423 acpi_ds_init_field_objects(op, walk_state);
424 }
425 }
426 return_ACPI_STATUS(status);
427 }
428
429 /*
430 * If we are executing a method, do not create any namespace objects
431 * during the load phase, only during execution.
432 */
433 if (!walk_state->method_node) {
434 if (op->common.aml_opcode == AML_REGION_OP) {
435 status =
436 acpi_ex_create_region(op->named.data,
437 op->named.length,
438 (acpi_adr_space_type) ((op->
439 common.
440 value.
441 arg)->
442 common.
443 value.
444 integer),
445 walk_state);
446 if (ACPI_FAILURE(status)) {
447 return_ACPI_STATUS(status);
448 }
449 } else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
450 status =
451 acpi_ex_create_region(op->named.data,
452 op->named.length,
453 ACPI_ADR_SPACE_DATA_TABLE,
454 walk_state);
455 if (ACPI_FAILURE(status)) {
456 return_ACPI_STATUS(status);
457 }
458 }
459 }
460#endif
461
462 if (op->common.aml_opcode == AML_NAME_OP) {
463
464 /* For Name opcode, get the object type from the argument */
465
466 if (op->common.value.arg) {
467 object_type = (acpi_ps_get_opcode_info((op->common.
468 value.arg)->
469 common.
470 aml_opcode))->
471 object_type;
472
473 /* Set node type if we have a namespace node */
474
475 if (op->common.node) {
476 op->common.node->type = (u8) object_type;
477 }
478 }
479 }
480
481 /*
482 * If we are executing a method, do not create any namespace objects
483 * during the load phase, only during execution.
484 */
485 if (!walk_state->method_node) {
486 if (op->common.aml_opcode == AML_METHOD_OP) {
487 /*
488 * method_op pkg_length name_string method_flags term_list
489 *
490 * Note: We must create the method node/object pair as soon as we
491 * see the method declaration. This allows later pass1 parsing
492 * of invocations of the method (need to know the number of
493 * arguments.)
494 */
495 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
496 "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
497 walk_state, op, op->named.node));
498
499 if (!acpi_ns_get_attached_object(op->named.node)) {
500 walk_state->operands[0] =
501 ACPI_CAST_PTR(void, op->named.node);
502 walk_state->num_operands = 1;
503
504 status =
505 acpi_ds_create_operands(walk_state,
506 op->common.value.
507 arg);
508 if (ACPI_SUCCESS(status)) {
509 status =
510 acpi_ex_create_method(op->named.
511 data,
512 op->named.
513 length,
514 walk_state);
515 }
516
517 walk_state->operands[0] = NULL;
518 walk_state->num_operands = 0;
519
520 if (ACPI_FAILURE(status)) {
521 return_ACPI_STATUS(status);
522 }
523 }
524 }
525 }
526
527 /* Pop the scope stack (only if loading a table) */
528
529 if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) {
530 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
531 "(%s): Popping scope for Op %p\n",
532 acpi_ut_get_type_name(object_type), op));
533
534 status = acpi_ds_scope_stack_pop(walk_state);
535 }
536
537 return_ACPI_STATUS(status);
538}
1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2/******************************************************************************
3 *
4 * Module Name: dswload - Dispatcher first pass namespace load callbacks
5 *
6 * Copyright (C) 2000 - 2023, Intel Corp.
7 *
8 *****************************************************************************/
9
10#include <acpi/acpi.h>
11#include "accommon.h"
12#include "acparser.h"
13#include "amlcode.h"
14#include "acdispat.h"
15#include "acinterp.h"
16#include "acnamesp.h"
17#ifdef ACPI_ASL_COMPILER
18#include "acdisasm.h"
19#endif
20
21#define _COMPONENT ACPI_DISPATCHER
22ACPI_MODULE_NAME("dswload")
23
24/*******************************************************************************
25 *
26 * FUNCTION: acpi_ds_init_callbacks
27 *
28 * PARAMETERS: walk_state - Current state of the parse tree walk
29 * pass_number - 1, 2, or 3
30 *
31 * RETURN: Status
32 *
33 * DESCRIPTION: Init walk state callbacks
34 *
35 ******************************************************************************/
36acpi_status
37acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
38{
39
40 switch (pass_number) {
41 case 0:
42
43 /* Parse only - caller will setup callbacks */
44
45 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
46 ACPI_PARSE_DELETE_TREE | ACPI_PARSE_DISASSEMBLE;
47 walk_state->descending_callback = NULL;
48 walk_state->ascending_callback = NULL;
49 break;
50
51 case 1:
52
53 /* Load pass 1 */
54
55 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
56 ACPI_PARSE_DELETE_TREE;
57 walk_state->descending_callback = acpi_ds_load1_begin_op;
58 walk_state->ascending_callback = acpi_ds_load1_end_op;
59 break;
60
61 case 2:
62
63 /* Load pass 2 */
64
65 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
66 ACPI_PARSE_DELETE_TREE;
67 walk_state->descending_callback = acpi_ds_load2_begin_op;
68 walk_state->ascending_callback = acpi_ds_load2_end_op;
69 break;
70
71 case 3:
72
73 /* Execution pass */
74
75 walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
76 ACPI_PARSE_DELETE_TREE;
77 walk_state->descending_callback = acpi_ds_exec_begin_op;
78 walk_state->ascending_callback = acpi_ds_exec_end_op;
79 break;
80
81 default:
82
83 return (AE_BAD_PARAMETER);
84 }
85
86 return (AE_OK);
87}
88
89/*******************************************************************************
90 *
91 * FUNCTION: acpi_ds_load1_begin_op
92 *
93 * PARAMETERS: walk_state - Current state of the parse tree walk
94 * out_op - Where to return op if a new one is created
95 *
96 * RETURN: Status
97 *
98 * DESCRIPTION: Descending callback used during the loading of ACPI tables.
99 *
100 ******************************************************************************/
101
102acpi_status
103acpi_ds_load1_begin_op(struct acpi_walk_state *walk_state,
104 union acpi_parse_object **out_op)
105{
106 union acpi_parse_object *op;
107 struct acpi_namespace_node *node;
108 acpi_status status;
109 acpi_object_type object_type;
110 char *path;
111 u32 flags;
112
113 ACPI_FUNCTION_TRACE_PTR(ds_load1_begin_op, walk_state->op);
114
115 op = walk_state->op;
116 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
117 walk_state));
118
119 /* We are only interested in opcodes that have an associated name */
120
121 if (op) {
122 if (!(walk_state->op_info->flags & AML_NAMED)) {
123 *out_op = op;
124 return_ACPI_STATUS(AE_OK);
125 }
126
127 /* Check if this object has already been installed in the namespace */
128
129 if (op->common.node) {
130 *out_op = op;
131 return_ACPI_STATUS(AE_OK);
132 }
133 }
134
135 path = acpi_ps_get_next_namestring(&walk_state->parser_state);
136
137 /* Map the raw opcode into an internal object type */
138
139 object_type = walk_state->op_info->object_type;
140
141 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
142 "State=%p Op=%p [%s]\n", walk_state, op,
143 acpi_ut_get_type_name(object_type)));
144
145 switch (walk_state->opcode) {
146 case AML_SCOPE_OP:
147 /*
148 * The target name of the Scope() operator must exist at this point so
149 * that we can actually open the scope to enter new names underneath it.
150 * Allow search-to-root for single namesegs.
151 */
152 status =
153 acpi_ns_lookup(walk_state->scope_info, path, object_type,
154 ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
155 walk_state, &(node));
156#ifdef ACPI_ASL_COMPILER
157 if (status == AE_NOT_FOUND) {
158 /*
159 * Table disassembly:
160 * Target of Scope() not found. Generate an External for it, and
161 * insert the name into the namespace.
162 */
163 acpi_dm_add_op_to_external_list(op, path,
164 ACPI_TYPE_DEVICE, 0, 0);
165 status =
166 acpi_ns_lookup(walk_state->scope_info, path,
167 object_type, ACPI_IMODE_LOAD_PASS1,
168 ACPI_NS_SEARCH_PARENT, walk_state,
169 &node);
170 }
171#endif
172 if (ACPI_FAILURE(status)) {
173 ACPI_ERROR_NAMESPACE(walk_state->scope_info, path,
174 status);
175 return_ACPI_STATUS(status);
176 }
177
178 /*
179 * Check to make sure that the target is
180 * one of the opcodes that actually opens a scope
181 */
182 switch (node->type) {
183 case ACPI_TYPE_ANY:
184 case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
185 case ACPI_TYPE_DEVICE:
186 case ACPI_TYPE_POWER:
187 case ACPI_TYPE_PROCESSOR:
188 case ACPI_TYPE_THERMAL:
189
190 /* These are acceptable types */
191 break;
192
193 case ACPI_TYPE_INTEGER:
194 case ACPI_TYPE_STRING:
195 case ACPI_TYPE_BUFFER:
196 /*
197 * These types we will allow, but we will change the type.
198 * This enables some existing code of the form:
199 *
200 * Name (DEB, 0)
201 * Scope (DEB) { ... }
202 *
203 * Note: silently change the type here. On the second pass,
204 * we will report a warning
205 */
206 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
207 "Type override - [%4.4s] had invalid type (%s) "
208 "for Scope operator, changed to type ANY\n",
209 acpi_ut_get_node_name(node),
210 acpi_ut_get_type_name(node->type)));
211
212 node->type = ACPI_TYPE_ANY;
213 walk_state->scope_info->common.value = ACPI_TYPE_ANY;
214 break;
215
216 case ACPI_TYPE_METHOD:
217 /*
218 * Allow scope change to root during execution of module-level
219 * code. Root is typed METHOD during this time.
220 */
221 if ((node == acpi_gbl_root_node) &&
222 (walk_state->
223 parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
224 break;
225 }
226
227 ACPI_FALLTHROUGH;
228
229 default:
230
231 /* All other types are an error */
232
233 ACPI_ERROR((AE_INFO,
234 "Invalid type (%s) for target of "
235 "Scope operator [%4.4s] (Cannot override)",
236 acpi_ut_get_type_name(node->type),
237 acpi_ut_get_node_name(node)));
238
239 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
240 }
241 break;
242
243 default:
244 /*
245 * For all other named opcodes, we will enter the name into
246 * the namespace.
247 *
248 * Setup the search flags.
249 * Since we are entering a name into the namespace, we do not want to
250 * enable the search-to-root upsearch.
251 *
252 * There are only two conditions where it is acceptable that the name
253 * already exists:
254 * 1) the Scope() operator can reopen a scoping object that was
255 * previously defined (Scope, Method, Device, etc.)
256 * 2) Whenever we are parsing a deferred opcode (op_region, Buffer,
257 * buffer_field, or Package), the name of the object is already
258 * in the namespace.
259 */
260 if (walk_state->deferred_node) {
261
262 /* This name is already in the namespace, get the node */
263
264 node = walk_state->deferred_node;
265 status = AE_OK;
266 break;
267 }
268
269 /*
270 * If we are executing a method, do not create any namespace objects
271 * during the load phase, only during execution.
272 */
273 if (walk_state->method_node) {
274 node = NULL;
275 status = AE_OK;
276 break;
277 }
278
279 flags = ACPI_NS_NO_UPSEARCH;
280 if ((walk_state->opcode != AML_SCOPE_OP) &&
281 (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
282 if (walk_state->namespace_override) {
283 flags |= ACPI_NS_OVERRIDE_IF_FOUND;
284 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
285 "[%s] Override allowed\n",
286 acpi_ut_get_type_name
287 (object_type)));
288 } else {
289 flags |= ACPI_NS_ERROR_IF_FOUND;
290 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
291 "[%s] Cannot already exist\n",
292 acpi_ut_get_type_name
293 (object_type)));
294 }
295 } else {
296 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
297 "[%s] Both Find or Create allowed\n",
298 acpi_ut_get_type_name(object_type)));
299 }
300
301 /*
302 * Enter the named type into the internal namespace. We enter the name
303 * as we go downward in the parse tree. Any necessary subobjects that
304 * involve arguments to the opcode must be created as we go back up the
305 * parse tree later.
306 */
307 status =
308 acpi_ns_lookup(walk_state->scope_info, path, object_type,
309 ACPI_IMODE_LOAD_PASS1, flags, walk_state,
310 &node);
311 if (ACPI_FAILURE(status)) {
312 if (status == AE_ALREADY_EXISTS) {
313
314 /* The name already exists in this scope */
315
316 if (node->flags & ANOBJ_IS_EXTERNAL) {
317 /*
318 * Allow one create on an object or segment that was
319 * previously declared External
320 */
321 node->flags &= ~ANOBJ_IS_EXTERNAL;
322 node->type = (u8) object_type;
323
324 /* Just retyped a node, probably will need to open a scope */
325
326 if (acpi_ns_opens_scope(object_type)) {
327 status =
328 acpi_ds_scope_stack_push
329 (node, object_type,
330 walk_state);
331 if (ACPI_FAILURE(status)) {
332 return_ACPI_STATUS
333 (status);
334 }
335 }
336
337 status = AE_OK;
338 }
339 }
340
341 if (ACPI_FAILURE(status)) {
342 ACPI_ERROR_NAMESPACE(walk_state->scope_info,
343 path, status);
344 return_ACPI_STATUS(status);
345 }
346 }
347 break;
348 }
349
350 /* Common exit */
351
352 if (!op) {
353
354 /* Create a new op */
355
356 op = acpi_ps_alloc_op(walk_state->opcode, walk_state->aml);
357 if (!op) {
358 return_ACPI_STATUS(AE_NO_MEMORY);
359 }
360 }
361
362 /* Initialize the op */
363
364#ifdef ACPI_CONSTANT_EVAL_ONLY
365 op->named.path = path;
366#endif
367
368 if (node) {
369 /*
370 * Put the Node in the "op" object that the parser uses, so we
371 * can get it again quickly when this scope is closed
372 */
373 op->common.node = node;
374 op->named.name = node->name.integer;
375 }
376
377 acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
378 op);
379 *out_op = op;
380 return_ACPI_STATUS(status);
381}
382
383/*******************************************************************************
384 *
385 * FUNCTION: acpi_ds_load1_end_op
386 *
387 * PARAMETERS: walk_state - Current state of the parse tree walk
388 *
389 * RETURN: Status
390 *
391 * DESCRIPTION: Ascending callback used during the loading of the namespace,
392 * both control methods and everything else.
393 *
394 ******************************************************************************/
395
396acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
397{
398 union acpi_parse_object *op;
399 acpi_object_type object_type;
400 acpi_status status = AE_OK;
401#ifdef ACPI_ASL_COMPILER
402 u8 param_count;
403#endif
404
405 ACPI_FUNCTION_TRACE(ds_load1_end_op);
406
407 op = walk_state->op;
408 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
409 walk_state));
410
411 /*
412 * Disassembler: handle create field operators here.
413 *
414 * create_buffer_field is a deferred op that is typically processed in load
415 * pass 2. However, disassembly of control method contents walk the parse
416 * tree with ACPI_PARSE_LOAD_PASS1 and AML_CREATE operators are processed
417 * in a later walk. This is a problem when there is a control method that
418 * has the same name as the AML_CREATE object. In this case, any use of the
419 * name segment will be detected as a method call rather than a reference
420 * to a buffer field.
421 *
422 * This earlier creation during disassembly solves this issue by inserting
423 * the named object in the ACPI namespace so that references to this name
424 * would be a name string rather than a method call.
425 */
426 if ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) &&
427 (walk_state->op_info->flags & AML_CREATE)) {
428 status = acpi_ds_create_buffer_field(op, walk_state);
429 return_ACPI_STATUS(status);
430 }
431
432 /* We are only interested in opcodes that have an associated name */
433
434 if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
435 return_ACPI_STATUS(AE_OK);
436 }
437
438 /* Get the object type to determine if we should pop the scope */
439
440 object_type = walk_state->op_info->object_type;
441
442 if (walk_state->op_info->flags & AML_FIELD) {
443 /*
444 * If we are executing a method, do not create any namespace objects
445 * during the load phase, only during execution.
446 */
447 if (!walk_state->method_node) {
448 if (walk_state->opcode == AML_FIELD_OP ||
449 walk_state->opcode == AML_BANK_FIELD_OP ||
450 walk_state->opcode == AML_INDEX_FIELD_OP) {
451 status =
452 acpi_ds_init_field_objects(op, walk_state);
453 }
454 }
455 return_ACPI_STATUS(status);
456 }
457
458 /*
459 * If we are executing a method, do not create any namespace objects
460 * during the load phase, only during execution.
461 */
462 if (!walk_state->method_node) {
463 if (op->common.aml_opcode == AML_REGION_OP) {
464 status =
465 acpi_ex_create_region(op->named.data,
466 op->named.length,
467 (acpi_adr_space_type)
468 ((op->common.value.arg)->
469 common.value.integer),
470 walk_state);
471 if (ACPI_FAILURE(status)) {
472 return_ACPI_STATUS(status);
473 }
474 } else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
475 status =
476 acpi_ex_create_region(op->named.data,
477 op->named.length,
478 ACPI_ADR_SPACE_DATA_TABLE,
479 walk_state);
480 if (ACPI_FAILURE(status)) {
481 return_ACPI_STATUS(status);
482 }
483 }
484 }
485
486 if (op->common.aml_opcode == AML_NAME_OP) {
487
488 /* For Name opcode, get the object type from the argument */
489
490 if (op->common.value.arg) {
491 object_type = (acpi_ps_get_opcode_info((op->common.
492 value.arg)->
493 common.
494 aml_opcode))->
495 object_type;
496
497 /* Set node type if we have a namespace node */
498
499 if (op->common.node) {
500 op->common.node->type = (u8) object_type;
501 }
502 }
503 }
504#ifdef ACPI_ASL_COMPILER
505 /*
506 * For external opcode, get the object type from the argument and
507 * get the parameter count from the argument's next.
508 */
509 if (acpi_gbl_disasm_flag &&
510 op->common.node && op->common.aml_opcode == AML_EXTERNAL_OP) {
511 /*
512 * Note, if this external is not a method
513 * Op->Common.Value.Arg->Common.Next->Common.Value.Integer == 0
514 * Therefore, param_count will be 0.
515 */
516 param_count =
517 (u8)op->common.value.arg->common.next->common.value.integer;
518 object_type = (u8)op->common.value.arg->common.value.integer;
519 op->common.node->flags |= ANOBJ_IS_EXTERNAL;
520 op->common.node->type = (u8)object_type;
521
522 acpi_dm_create_subobject_for_external((u8)object_type,
523 &op->common.node,
524 param_count);
525
526 /*
527 * Add the external to the external list because we may be
528 * emitting code based off of the items within the external list.
529 */
530 acpi_dm_add_op_to_external_list(op, op->named.path,
531 (u8)object_type, param_count,
532 ACPI_EXT_ORIGIN_FROM_OPCODE |
533 ACPI_EXT_RESOLVED_REFERENCE);
534 }
535#endif
536
537 /*
538 * If we are executing a method, do not create any namespace objects
539 * during the load phase, only during execution.
540 */
541 if (!walk_state->method_node) {
542 if (op->common.aml_opcode == AML_METHOD_OP) {
543 /*
544 * method_op pkg_length name_string method_flags term_list
545 *
546 * Note: We must create the method node/object pair as soon as we
547 * see the method declaration. This allows later pass1 parsing
548 * of invocations of the method (need to know the number of
549 * arguments.)
550 */
551 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
552 "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
553 walk_state, op, op->named.node));
554
555 if (!acpi_ns_get_attached_object(op->named.node)) {
556 walk_state->operands[0] =
557 ACPI_CAST_PTR(void, op->named.node);
558 walk_state->num_operands = 1;
559
560 status =
561 acpi_ds_create_operands(walk_state,
562 op->common.value.
563 arg);
564 if (ACPI_SUCCESS(status)) {
565 status =
566 acpi_ex_create_method(op->named.
567 data,
568 op->named.
569 length,
570 walk_state);
571 }
572
573 walk_state->operands[0] = NULL;
574 walk_state->num_operands = 0;
575
576 if (ACPI_FAILURE(status)) {
577 return_ACPI_STATUS(status);
578 }
579 }
580 }
581 }
582
583 /* Pop the scope stack (only if loading a table) */
584
585 if (!walk_state->method_node &&
586 op->common.aml_opcode != AML_EXTERNAL_OP &&
587 acpi_ns_opens_scope(object_type)) {
588 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
589 "(%s): Popping scope for Op %p\n",
590 acpi_ut_get_type_name(object_type), op));
591
592 status = acpi_ds_scope_stack_pop(walk_state);
593 }
594
595 return_ACPI_STATUS(status);
596}