Loading...
1/*
2 * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
17 */
18
19#include <linux/init.h>
20#include <linux/kernel.h>
21#include <linux/linkage.h>
22#include <linux/mm.h>
23#include <linux/blkdev.h>
24#include <linux/bootmem.h>
25#include <linux/pm.h>
26#include <linux/smp.h>
27
28#include <asm/bootinfo.h>
29#include <asm/reboot.h>
30#include <asm/sibyte/board.h>
31#include <asm/smp-ops.h>
32
33#include <asm/fw/cfe/cfe_api.h>
34#include <asm/fw/cfe/cfe_error.h>
35
36/* Max ram addressable in 32-bit segments */
37#ifdef CONFIG_64BIT
38#define MAX_RAM_SIZE (~0ULL)
39#else
40#ifdef CONFIG_HIGHMEM
41#ifdef CONFIG_64BIT_PHYS_ADDR
42#define MAX_RAM_SIZE (~0ULL)
43#else
44#define MAX_RAM_SIZE (0xffffffffULL)
45#endif
46#else
47#define MAX_RAM_SIZE (0x1fffffffULL)
48#endif
49#endif
50
51#define SIBYTE_MAX_MEM_REGIONS 8
52phys_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
53phys_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
54unsigned int board_mem_region_count;
55
56int cfe_cons_handle;
57
58#ifdef CONFIG_BLK_DEV_INITRD
59extern unsigned long initrd_start, initrd_end;
60#endif
61
62static void __noreturn cfe_linux_exit(void *arg)
63{
64 int warm = *(int *)arg;
65
66 if (smp_processor_id()) {
67 static int reboot_smp;
68
69 /* Don't repeat the process from another CPU */
70 if (!reboot_smp) {
71 /* Get CPU 0 to do the cfe_exit */
72 reboot_smp = 1;
73 smp_call_function(cfe_linux_exit, arg, 0);
74 }
75 } else {
76 printk("Passing control back to CFE...\n");
77 cfe_exit(warm, 0);
78 printk("cfe_exit returned??\n");
79 }
80 while (1);
81}
82
83static void __noreturn cfe_linux_restart(char *command)
84{
85 static const int zero;
86
87 cfe_linux_exit((void *)&zero);
88}
89
90static void __noreturn cfe_linux_halt(void)
91{
92 static const int one = 1;
93
94 cfe_linux_exit((void *)&one);
95}
96
97static __init void prom_meminit(void)
98{
99 u64 addr, size, type; /* regardless of 64BIT_PHYS_ADDR */
100 int mem_flags = 0;
101 unsigned int idx;
102 int rd_flag;
103#ifdef CONFIG_BLK_DEV_INITRD
104 unsigned long initrd_pstart;
105 unsigned long initrd_pend;
106
107 initrd_pstart = CPHYSADDR(initrd_start);
108 initrd_pend = CPHYSADDR(initrd_end);
109 if (initrd_start &&
110 ((initrd_pstart > MAX_RAM_SIZE)
111 || (initrd_pend > MAX_RAM_SIZE))) {
112 panic("initrd out of addressable memory");
113 }
114
115#endif /* INITRD */
116
117 for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE;
118 idx++) {
119 rd_flag = 0;
120 if (type == CFE_MI_AVAILABLE) {
121 /*
122 * See if this block contains (any portion of) the
123 * ramdisk
124 */
125#ifdef CONFIG_BLK_DEV_INITRD
126 if (initrd_start) {
127 if ((initrd_pstart > addr) &&
128 (initrd_pstart < (addr + size))) {
129 add_memory_region(addr,
130 initrd_pstart - addr,
131 BOOT_MEM_RAM);
132 rd_flag = 1;
133 }
134 if ((initrd_pend > addr) &&
135 (initrd_pend < (addr + size))) {
136 add_memory_region(initrd_pend,
137 (addr + size) - initrd_pend,
138 BOOT_MEM_RAM);
139 rd_flag = 1;
140 }
141 }
142#endif
143 if (!rd_flag) {
144 if (addr > MAX_RAM_SIZE)
145 continue;
146 if (addr+size > MAX_RAM_SIZE)
147 size = MAX_RAM_SIZE - (addr+size) + 1;
148 /*
149 * memcpy/__copy_user prefetch, which
150 * will cause a bus error for
151 * KSEG/KUSEG addrs not backed by RAM.
152 * Hence, reserve some padding for the
153 * prefetch distance.
154 */
155 if (size > 512)
156 size -= 512;
157 add_memory_region(addr, size, BOOT_MEM_RAM);
158 }
159 board_mem_region_addrs[board_mem_region_count] = addr;
160 board_mem_region_sizes[board_mem_region_count] = size;
161 board_mem_region_count++;
162 if (board_mem_region_count ==
163 SIBYTE_MAX_MEM_REGIONS) {
164 /*
165 * Too many regions. Need to configure more
166 */
167 while(1);
168 }
169 }
170 }
171#ifdef CONFIG_BLK_DEV_INITRD
172 if (initrd_start) {
173 add_memory_region(initrd_pstart, initrd_pend - initrd_pstart,
174 BOOT_MEM_RESERVED);
175 }
176#endif
177}
178
179#ifdef CONFIG_BLK_DEV_INITRD
180static int __init initrd_setup(char *str)
181{
182 char rdarg[64];
183 int idx;
184 char *tmp, *endptr;
185 unsigned long initrd_size;
186
187 /* Make a copy of the initrd argument so we can smash it up here */
188 for (idx = 0; idx < sizeof(rdarg)-1; idx++) {
189 if (!str[idx] || (str[idx] == ' ')) break;
190 rdarg[idx] = str[idx];
191 }
192
193 rdarg[idx] = 0;
194 str = rdarg;
195
196 /*
197 *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>"
198 * e.g. initrd=3abfd@80010000. This is set up by the loader.
199 */
200 for (tmp = str; *tmp != '@'; tmp++) {
201 if (!*tmp) {
202 goto fail;
203 }
204 }
205 *tmp = 0;
206 tmp++;
207 if (!*tmp) {
208 goto fail;
209 }
210 initrd_size = simple_strtoul(str, &endptr, 16);
211 if (*endptr) {
212 *(tmp-1) = '@';
213 goto fail;
214 }
215 *(tmp-1) = '@';
216 initrd_start = simple_strtoul(tmp, &endptr, 16);
217 if (*endptr) {
218 goto fail;
219 }
220 initrd_end = initrd_start + initrd_size;
221 printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start);
222 return 1;
223 fail:
224 printk("Bad initrd argument. Disabling initrd\n");
225 initrd_start = 0;
226 initrd_end = 0;
227 return 1;
228}
229
230#endif
231
232extern struct plat_smp_ops sb_smp_ops;
233extern struct plat_smp_ops bcm1480_smp_ops;
234
235/*
236 * prom_init is called just after the cpu type is determined, from setup_arch()
237 */
238void __init prom_init(void)
239{
240 uint64_t cfe_ept, cfe_handle;
241 unsigned int cfe_eptseal;
242 int argc = fw_arg0;
243 char **envp = (char **) fw_arg2;
244 int *prom_vec = (int *) fw_arg3;
245
246 _machine_restart = cfe_linux_restart;
247 _machine_halt = cfe_linux_halt;
248 pm_power_off = cfe_linux_halt;
249
250 /*
251 * Check if a loader was used; if NOT, the 4 arguments are
252 * what CFE gives us (handle, 0, EPT and EPTSEAL)
253 */
254 if (argc < 0) {
255 cfe_handle = (uint64_t)(long)argc;
256 cfe_ept = (long)envp;
257 cfe_eptseal = (uint32_t)(unsigned long)prom_vec;
258 } else {
259 if ((int32_t)(long)prom_vec < 0) {
260 /*
261 * Old loader; all it gives us is the handle,
262 * so use the "known" entrypoint and assume
263 * the seal.
264 */
265 cfe_handle = (uint64_t)(long)prom_vec;
266 cfe_ept = (uint64_t)((int32_t)0x9fc00500);
267 cfe_eptseal = CFE_EPTSEAL;
268 } else {
269 /*
270 * Newer loaders bundle the handle/ept/eptseal
271 * Note: prom_vec is in the loader's useg
272 * which is still alive in the TLB.
273 */
274 cfe_handle = (uint64_t)((int32_t *)prom_vec)[0];
275 cfe_ept = (uint64_t)((int32_t *)prom_vec)[2];
276 cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3];
277 }
278 }
279 if (cfe_eptseal != CFE_EPTSEAL) {
280 /* too early for panic to do any good */
281 printk("CFE's entrypoint seal doesn't match. Spinning.");
282 while (1) ;
283 }
284 cfe_init(cfe_handle, cfe_ept);
285 /*
286 * Get the handle for (at least) prom_putchar, possibly for
287 * boot console
288 */
289 cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
290 if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, COMMAND_LINE_SIZE) < 0) {
291 if (argc >= 0) {
292 /* The loader should have set the command line */
293 /* too early for panic to do any good */
294 printk("LINUX_CMDLINE not defined in cfe.");
295 while (1) ;
296 }
297 }
298
299#ifdef CONFIG_BLK_DEV_INITRD
300 {
301 char *ptr;
302 /* Need to find out early whether we've got an initrd. So scan
303 the list looking now */
304 for (ptr = arcs_cmdline; *ptr; ptr++) {
305 while (*ptr == ' ') {
306 ptr++;
307 }
308 if (!strncmp(ptr, "initrd=", 7)) {
309 initrd_setup(ptr+7);
310 break;
311 } else {
312 while (*ptr && (*ptr != ' ')) {
313 ptr++;
314 }
315 }
316 }
317 }
318#endif /* CONFIG_BLK_DEV_INITRD */
319
320 /* Not sure this is needed, but it's the safe way. */
321 arcs_cmdline[COMMAND_LINE_SIZE-1] = 0;
322
323 prom_meminit();
324
325#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
326 register_smp_ops(&sb_smp_ops);
327#endif
328#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
329 register_smp_ops(&bcm1480_smp_ops);
330#endif
331}
332
333void __init prom_free_prom_memory(void)
334{
335 /* Not sure what I'm supposed to do here. Nothing, I think */
336}
337
338void prom_putchar(char c)
339{
340 int ret;
341
342 while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0)
343 ;
344}
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
4 */
5
6#include <linux/init.h>
7#include <linux/kernel.h>
8#include <linux/linkage.h>
9#include <linux/mm.h>
10#include <linux/memblock.h>
11#include <linux/pm.h>
12#include <linux/smp.h>
13
14#include <asm/bootinfo.h>
15#include <asm/reboot.h>
16#include <asm/setup.h>
17#include <asm/sibyte/board.h>
18#include <asm/smp-ops.h>
19
20#include <asm/fw/cfe/cfe_api.h>
21#include <asm/fw/cfe/cfe_error.h>
22
23/* Max ram addressable in 32-bit segments */
24#ifdef CONFIG_64BIT
25#define MAX_RAM_SIZE (~0ULL)
26#else
27#ifdef CONFIG_HIGHMEM
28#ifdef CONFIG_PHYS_ADDR_T_64BIT
29#define MAX_RAM_SIZE (~0ULL)
30#else
31#define MAX_RAM_SIZE (0xffffffffULL)
32#endif
33#else
34#define MAX_RAM_SIZE (0x1fffffffULL)
35#endif
36#endif
37
38int cfe_cons_handle;
39
40#ifdef CONFIG_BLK_DEV_INITRD
41extern unsigned long initrd_start, initrd_end;
42#endif
43
44static void __noreturn cfe_linux_exit(void *arg)
45{
46 int warm = *(int *)arg;
47
48 if (smp_processor_id()) {
49 static int reboot_smp;
50
51 /* Don't repeat the process from another CPU */
52 if (!reboot_smp) {
53 /* Get CPU 0 to do the cfe_exit */
54 reboot_smp = 1;
55 smp_call_function(cfe_linux_exit, arg, 0);
56 }
57 } else {
58 printk("Passing control back to CFE...\n");
59 cfe_exit(warm, 0);
60 printk("cfe_exit returned??\n");
61 }
62 while (1);
63}
64
65static void __noreturn cfe_linux_restart(char *command)
66{
67 static const int zero;
68
69 cfe_linux_exit((void *)&zero);
70}
71
72static void __noreturn cfe_linux_halt(void)
73{
74 static const int one = 1;
75
76 cfe_linux_exit((void *)&one);
77}
78
79static __init void prom_meminit(void)
80{
81 u64 addr, size, type; /* regardless of PHYS_ADDR_T_64BIT */
82 int mem_flags = 0;
83 unsigned int idx;
84 int rd_flag;
85#ifdef CONFIG_BLK_DEV_INITRD
86 unsigned long initrd_pstart;
87 unsigned long initrd_pend;
88
89 initrd_pstart = CPHYSADDR(initrd_start);
90 initrd_pend = CPHYSADDR(initrd_end);
91 if (initrd_start &&
92 ((initrd_pstart > MAX_RAM_SIZE)
93 || (initrd_pend > MAX_RAM_SIZE))) {
94 panic("initrd out of addressable memory");
95 }
96
97#endif /* INITRD */
98
99 for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE;
100 idx++) {
101 rd_flag = 0;
102 if (type == CFE_MI_AVAILABLE) {
103 /*
104 * See if this block contains (any portion of) the
105 * ramdisk
106 */
107#ifdef CONFIG_BLK_DEV_INITRD
108 if (initrd_start) {
109 if ((initrd_pstart > addr) &&
110 (initrd_pstart < (addr + size))) {
111 memblock_add(addr,
112 initrd_pstart - addr);
113 rd_flag = 1;
114 }
115 if ((initrd_pend > addr) &&
116 (initrd_pend < (addr + size))) {
117 memblock_add(initrd_pend,
118 (addr + size) - initrd_pend);
119 rd_flag = 1;
120 }
121 }
122#endif
123 if (!rd_flag) {
124 if (addr > MAX_RAM_SIZE)
125 continue;
126 if (addr+size > MAX_RAM_SIZE)
127 size = MAX_RAM_SIZE - (addr+size) + 1;
128 /*
129 * memcpy/__copy_user prefetch, which
130 * will cause a bus error for
131 * KSEG/KUSEG addrs not backed by RAM.
132 * Hence, reserve some padding for the
133 * prefetch distance.
134 */
135 if (size > 512)
136 size -= 512;
137 memblock_add(addr, size);
138 }
139 }
140 }
141#ifdef CONFIG_BLK_DEV_INITRD
142 if (initrd_start) {
143 memblock_add(initrd_pstart, initrd_pend - initrd_pstart);
144 memblock_reserve(initrd_pstart, initrd_pend - initrd_pstart);
145 }
146#endif
147}
148
149#ifdef CONFIG_BLK_DEV_INITRD
150static int __init initrd_setup(char *str)
151{
152 char rdarg[64];
153 int idx;
154 char *tmp, *endptr;
155 unsigned long initrd_size;
156
157 /* Make a copy of the initrd argument so we can smash it up here */
158 for (idx = 0; idx < sizeof(rdarg)-1; idx++) {
159 if (!str[idx] || (str[idx] == ' ')) break;
160 rdarg[idx] = str[idx];
161 }
162
163 rdarg[idx] = 0;
164 str = rdarg;
165
166 /*
167 *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>"
168 * e.g. initrd=3abfd@80010000. This is set up by the loader.
169 */
170 for (tmp = str; *tmp != '@'; tmp++) {
171 if (!*tmp) {
172 goto fail;
173 }
174 }
175 *tmp = 0;
176 tmp++;
177 if (!*tmp) {
178 goto fail;
179 }
180 initrd_size = simple_strtoul(str, &endptr, 16);
181 if (*endptr) {
182 *(tmp-1) = '@';
183 goto fail;
184 }
185 *(tmp-1) = '@';
186 initrd_start = simple_strtoul(tmp, &endptr, 16);
187 if (*endptr) {
188 goto fail;
189 }
190 initrd_end = initrd_start + initrd_size;
191 printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start);
192 return 1;
193 fail:
194 printk("Bad initrd argument. Disabling initrd\n");
195 initrd_start = 0;
196 initrd_end = 0;
197 return 1;
198}
199
200#endif
201
202extern const struct plat_smp_ops sb_smp_ops;
203extern const struct plat_smp_ops bcm1480_smp_ops;
204
205/*
206 * prom_init is called just after the cpu type is determined, from setup_arch()
207 */
208void __init prom_init(void)
209{
210 uint64_t cfe_ept, cfe_handle;
211 unsigned int cfe_eptseal;
212 int argc = fw_arg0;
213 char **envp = (char **) fw_arg2;
214 int *prom_vec = (int *) fw_arg3;
215
216 _machine_restart = cfe_linux_restart;
217 _machine_halt = cfe_linux_halt;
218 pm_power_off = cfe_linux_halt;
219
220 /*
221 * Check if a loader was used; if NOT, the 4 arguments are
222 * what CFE gives us (handle, 0, EPT and EPTSEAL)
223 */
224 if (argc < 0) {
225 cfe_handle = (uint64_t)(long)argc;
226 cfe_ept = (long)envp;
227 cfe_eptseal = (uint32_t)(unsigned long)prom_vec;
228 } else {
229 if ((int32_t)(long)prom_vec < 0) {
230 /*
231 * Old loader; all it gives us is the handle,
232 * so use the "known" entrypoint and assume
233 * the seal.
234 */
235 cfe_handle = (uint64_t)(long)prom_vec;
236 cfe_ept = (uint64_t)((int32_t)0x9fc00500);
237 cfe_eptseal = CFE_EPTSEAL;
238 } else {
239 /*
240 * Newer loaders bundle the handle/ept/eptseal
241 * Note: prom_vec is in the loader's useg
242 * which is still alive in the TLB.
243 */
244 cfe_handle = (uint64_t)((int32_t *)prom_vec)[0];
245 cfe_ept = (uint64_t)((int32_t *)prom_vec)[2];
246 cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3];
247 }
248 }
249 if (cfe_eptseal != CFE_EPTSEAL) {
250 /* too early for panic to do any good */
251 printk("CFE's entrypoint seal doesn't match. Spinning.");
252 while (1) ;
253 }
254 cfe_init(cfe_handle, cfe_ept);
255 /*
256 * Get the handle for (at least) prom_putchar, possibly for
257 * boot console
258 */
259 cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
260 if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, COMMAND_LINE_SIZE) < 0) {
261 if (argc >= 0) {
262 /* The loader should have set the command line */
263 /* too early for panic to do any good */
264 printk("LINUX_CMDLINE not defined in cfe.");
265 while (1) ;
266 }
267 }
268
269#ifdef CONFIG_BLK_DEV_INITRD
270 {
271 char *ptr;
272 /* Need to find out early whether we've got an initrd. So scan
273 the list looking now */
274 for (ptr = arcs_cmdline; *ptr; ptr++) {
275 while (*ptr == ' ') {
276 ptr++;
277 }
278 if (!strncmp(ptr, "initrd=", 7)) {
279 initrd_setup(ptr+7);
280 break;
281 } else {
282 while (*ptr && (*ptr != ' ')) {
283 ptr++;
284 }
285 }
286 }
287 }
288#endif /* CONFIG_BLK_DEV_INITRD */
289
290 /* Not sure this is needed, but it's the safe way. */
291 arcs_cmdline[COMMAND_LINE_SIZE-1] = 0;
292
293 prom_meminit();
294
295#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
296 register_smp_ops(&sb_smp_ops);
297#endif
298#ifdef CONFIG_SIBYTE_BCM1x80
299 register_smp_ops(&bcm1480_smp_ops);
300#endif
301}
302
303void prom_putchar(char c)
304{
305 int ret;
306
307 while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0)
308 ;
309}