Linux Audio

Check our new training course

Loading...
v3.1
 
  1/*
  2 * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
  3 *
  4 * All Alchemy development boards (except, of course, the weird PB1000)
  5 * have a few registers in a CPLD with standardised layout; they mostly
  6 * only differ in base address and bit meanings in the RESETS and BOARD
  7 * registers.
  8 *
  9 * All data taken from the official AMD board documentation sheets.
 10 */
 11
 12#ifndef _DB1XXX_BCSR_H_
 13#define _DB1XXX_BCSR_H_
 14
 15
 16/* BCSR base addresses on various boards. BCSR base 2 refers to the
 17 * physical address of the first HEXLEDS register, which is usually
 18 * a variable offset from the WHOAMI register.
 19 */
 20
 21/* DB1000, DB1100, DB1500, PB1100, PB1500 */
 22#define DB1000_BCSR_PHYS_ADDR	0x0E000000
 23#define DB1000_BCSR_HEXLED_OFS	0x01000000
 24
 25#define DB1550_BCSR_PHYS_ADDR	0x0F000000
 26#define DB1550_BCSR_HEXLED_OFS	0x00400000
 27
 28#define PB1550_BCSR_PHYS_ADDR	0x0F000000
 29#define PB1550_BCSR_HEXLED_OFS	0x00800000
 30
 31#define DB1200_BCSR_PHYS_ADDR	0x19800000
 32#define DB1200_BCSR_HEXLED_OFS	0x00400000
 33
 34#define PB1200_BCSR_PHYS_ADDR	0x0D800000
 35#define PB1200_BCSR_HEXLED_OFS	0x00400000
 36
 
 
 37
 38enum bcsr_id {
 39	/* BCSR base 1 */
 40	BCSR_WHOAMI	= 0,
 41	BCSR_STATUS,
 42	BCSR_SWITCHES,
 43	BCSR_RESETS,
 44	BCSR_PCMCIA,
 45	BCSR_BOARD,
 46	BCSR_LEDS,
 47	BCSR_SYSTEM,
 48	/* Au1200/1300 based boards */
 49	BCSR_INTCLR,
 50	BCSR_INTSET,
 51	BCSR_MASKCLR,
 52	BCSR_MASKSET,
 53	BCSR_SIGSTAT,
 54	BCSR_INTSTAT,
 55
 56	/* BCSR base 2 */
 57	BCSR_HEXLEDS,
 58	BCSR_RSVD1,
 59	BCSR_HEXCLEAR,
 60
 61	BCSR_CNT,
 62};
 63
 64/* register offsets, valid for all Db1xxx/Pb1xxx boards */
 65#define BCSR_REG_WHOAMI		0x00
 66#define BCSR_REG_STATUS		0x04
 67#define BCSR_REG_SWITCHES	0x08
 68#define BCSR_REG_RESETS		0x0c
 69#define BCSR_REG_PCMCIA		0x10
 70#define BCSR_REG_BOARD		0x14
 71#define BCSR_REG_LEDS		0x18
 72#define BCSR_REG_SYSTEM		0x1c
 73/* Au1200/Au1300 based boards: CPLD IRQ muxer */
 74#define BCSR_REG_INTCLR		0x20
 75#define BCSR_REG_INTSET		0x24
 76#define BCSR_REG_MASKCLR	0x28
 77#define BCSR_REG_MASKSET	0x2c
 78#define BCSR_REG_SIGSTAT	0x30
 79#define BCSR_REG_INTSTAT	0x34
 80
 81/* hexled control, offset from BCSR base 2 */
 82#define BCSR_REG_HEXLEDS	0x00
 83#define BCSR_REG_HEXCLEAR	0x08
 84
 85/*
 86 * Register Bits and Pieces.
 87 */
 88#define BCSR_WHOAMI_DCID(x)		((x) & 0xf)
 89#define BCSR_WHOAMI_CPLD(x)		(((x) >> 4) & 0xf)
 90#define BCSR_WHOAMI_BOARD(x)		(((x) >> 8) & 0xf)
 91
 92/* register "WHOAMI" bits 11:8 identify the board */
 93enum bcsr_whoami_boards {
 94	BCSR_WHOAMI_PB1500 = 1,
 95	BCSR_WHOAMI_PB1500R2,
 96	BCSR_WHOAMI_PB1100,
 97	BCSR_WHOAMI_DB1000,
 98	BCSR_WHOAMI_DB1100,
 99	BCSR_WHOAMI_DB1500,
100	BCSR_WHOAMI_DB1550,
101	BCSR_WHOAMI_PB1550_DDR,
102	BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR,
103	BCSR_WHOAMI_PB1550_SDR,
104	BCSR_WHOAMI_PB1200_DDR1,
105	BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
106	BCSR_WHOAMI_PB1200_DDR2,
107	BCSR_WHOAMI_DB1200,
 
108};
109
110/* STATUS reg.  Unless otherwise noted, they're valid on all boards.
111 * PB1200 = DB1200.
112 */
113#define BCSR_STATUS_PC0VS		0x0003
114#define BCSR_STATUS_PC1VS		0x000C
115#define BCSR_STATUS_PC0FI		0x0010
116#define BCSR_STATUS_PC1FI		0x0020
117#define BCSR_STATUS_PB1550_SWAPBOOT	0x0040
118#define BCSR_STATUS_SRAMWIDTH		0x0080
119#define BCSR_STATUS_FLASHBUSY		0x0100
120#define BCSR_STATUS_ROMBUSY		0x0400
121#define BCSR_STATUS_SD0WP		0x0400	/* DB1200 */
122#define BCSR_STATUS_SD1WP		0x0800
123#define BCSR_STATUS_USBOTGID		0x0800	/* PB/DB1550 */
124#define BCSR_STATUS_DB1000_SWAPBOOT	0x2000
125#define BCSR_STATUS_DB1200_SWAPBOOT	0x0040	/* DB1200 */
126#define BCSR_STATUS_IDECBLID		0x0200	/* DB1200 */
127#define BCSR_STATUS_DB1200_U0RXD	0x1000	/* DB1200 */
128#define BCSR_STATUS_DB1200_U1RXD	0x2000	/* DB1200 */
129#define BCSR_STATUS_FLASHDEN		0xC000
130#define BCSR_STATUS_DB1550_U0RXD	0x1000	/* DB1550 */
131#define BCSR_STATUS_DB1550_U3RXD	0x2000	/* DB1550 */
132#define BCSR_STATUS_PB1550_U0RXD	0x1000	/* PB1550 */
133#define BCSR_STATUS_PB1550_U1RXD	0x2000	/* PB1550 */
134#define BCSR_STATUS_PB1550_U3RXD	0x8000	/* PB1550 */
135
 
 
 
 
 
136
137/* DB/PB1000,1100,1500,1550 */
138#define BCSR_RESETS_PHY0		0x0001
139#define BCSR_RESETS_PHY1		0x0002
140#define BCSR_RESETS_DC			0x0004
141#define BCSR_RESETS_FIR_SEL		0x2000
142#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
143#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
144#define BCSR_RESETS_PB1550_WSCFSM	0x2000
145#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
146#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
147#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
148#define BCSR_RESETS_DMAREQ		0x8000	/* PB1550 */
149
150#define BCSR_BOARD_PCIM66EN		0x0001
151#define BCSR_BOARD_SD0PWR		0x0040
152#define BCSR_BOARD_SD1PWR		0x0080
153#define BCSR_BOARD_PCIM33		0x0100
154#define BCSR_BOARD_PCIEXTARB		0x0200
155#define BCSR_BOARD_GPIO200RST		0x0400
156#define BCSR_BOARD_PCICLKOUT		0x0800
 
 
157#define BCSR_BOARD_PCICFG		0x1000
158#define BCSR_BOARD_SPISEL		0x4000	/* PB/DB1550 */
159#define BCSR_BOARD_SD0WP		0x4000	/* DB1100 */
160#define BCSR_BOARD_SD1WP		0x8000	/* DB1100 */
161
162
163/* DB/PB1200 */
164#define BCSR_RESETS_ETH			0x0001
165#define BCSR_RESETS_CAMERA		0x0002
166#define BCSR_RESETS_DC			0x0004
167#define BCSR_RESETS_IDE			0x0008
168#define BCSR_RESETS_TV			0x0010	/* DB1200 */
169/* Not resets but in the same register */
170#define BCSR_RESETS_PWMR1MUX		0x0800	/* DB1200 */
171#define BCSR_RESETS_PB1200_WSCFSM	0x0800	/* PB1200 */
172#define BCSR_RESETS_PSC0MUX		0x1000
173#define BCSR_RESETS_PSC1MUX		0x2000
174#define BCSR_RESETS_SPISEL		0x4000
175#define BCSR_RESETS_SD1MUX		0x8000	/* PB1200 */
176
 
 
 
 
 
 
 
 
177#define BCSR_BOARD_LCDVEE		0x0001
178#define BCSR_BOARD_LCDVDD		0x0002
179#define BCSR_BOARD_LCDBL		0x0004
180#define BCSR_BOARD_CAMSNAP		0x0010
181#define BCSR_BOARD_CAMPWR		0x0020
182#define BCSR_BOARD_SD0PWR		0x0040
183
 
184
185#define BCSR_SWITCHES_DIP		0x00FF
186#define BCSR_SWITCHES_DIP_1		0x0080
187#define BCSR_SWITCHES_DIP_2		0x0040
188#define BCSR_SWITCHES_DIP_3		0x0020
189#define BCSR_SWITCHES_DIP_4		0x0010
190#define BCSR_SWITCHES_DIP_5		0x0008
191#define BCSR_SWITCHES_DIP_6		0x0004
192#define BCSR_SWITCHES_DIP_7		0x0002
193#define BCSR_SWITCHES_DIP_8		0x0001
194#define BCSR_SWITCHES_ROTARY		0x0F00
195
196
197#define BCSR_PCMCIA_PC0VPP		0x0003
198#define BCSR_PCMCIA_PC0VCC		0x000C
199#define BCSR_PCMCIA_PC0DRVEN		0x0010
200#define BCSR_PCMCIA_PC0RST		0x0080
201#define BCSR_PCMCIA_PC1VPP		0x0300
202#define BCSR_PCMCIA_PC1VCC		0x0C00
203#define BCSR_PCMCIA_PC1DRVEN		0x1000
204#define BCSR_PCMCIA_PC1RST		0x8000
205
206
207#define BCSR_LEDS_DECIMALS		0x0003
208#define BCSR_LEDS_LED0			0x0100
209#define BCSR_LEDS_LED1			0x0200
210#define BCSR_LEDS_LED2			0x0400
211#define BCSR_LEDS_LED3			0x0800
212
213
214#define BCSR_SYSTEM_RESET		0x8000	/* clear to reset */
215#define BCSR_SYSTEM_PWROFF		0x4000	/* set to power off */
216#define BCSR_SYSTEM_VDDI		0x001F	/* PB1xxx boards */
217
 
 
 
218
219
220
221/* initialize BCSR for a board. Provide the PHYSICAL addresses of both
222 * BCSR spaces.
223 */
224void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys);
225
226/* read a board register */
227unsigned short bcsr_read(enum bcsr_id reg);
228
229/* write to a board register */
230void bcsr_write(enum bcsr_id reg, unsigned short val);
231
232/* modify a register. clear bits set in 'clr', set bits set in 'set' */
233void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set);
234
235/* install CPLD IRQ demuxer (DB1200/PB1200) */
236void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq);
237
238#endif
v6.8
  1/* SPDX-License-Identifier: GPL-2.0 */
  2/*
  3 * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
  4 *
  5 * All Alchemy development boards (except, of course, the weird PB1000)
  6 * have a few registers in a CPLD with standardised layout; they mostly
  7 * only differ in base address and bit meanings in the RESETS and BOARD
  8 * registers.
  9 *
 10 * All data taken from the official AMD board documentation sheets.
 11 */
 12
 13#ifndef _DB1XXX_BCSR_H_
 14#define _DB1XXX_BCSR_H_
 15
 16
 17/* BCSR base addresses on various boards. BCSR base 2 refers to the
 18 * physical address of the first HEXLEDS register, which is usually
 19 * a variable offset from the WHOAMI register.
 20 */
 21
 22/* DB1000, DB1100, DB1500, PB1100, PB1500 */
 23#define DB1000_BCSR_PHYS_ADDR	0x0E000000
 24#define DB1000_BCSR_HEXLED_OFS	0x01000000
 25
 26#define DB1550_BCSR_PHYS_ADDR	0x0F000000
 27#define DB1550_BCSR_HEXLED_OFS	0x00400000
 28
 29#define PB1550_BCSR_PHYS_ADDR	0x0F000000
 30#define PB1550_BCSR_HEXLED_OFS	0x00800000
 31
 32#define DB1200_BCSR_PHYS_ADDR	0x19800000
 33#define DB1200_BCSR_HEXLED_OFS	0x00400000
 34
 35#define PB1200_BCSR_PHYS_ADDR	0x0D800000
 36#define PB1200_BCSR_HEXLED_OFS	0x00400000
 37
 38#define DB1300_BCSR_PHYS_ADDR	0x19800000
 39#define DB1300_BCSR_HEXLED_OFS	0x00400000
 40
 41enum bcsr_id {
 42	/* BCSR base 1 */
 43	BCSR_WHOAMI	= 0,
 44	BCSR_STATUS,
 45	BCSR_SWITCHES,
 46	BCSR_RESETS,
 47	BCSR_PCMCIA,
 48	BCSR_BOARD,
 49	BCSR_LEDS,
 50	BCSR_SYSTEM,
 51	/* Au1200/1300 based boards */
 52	BCSR_INTCLR,
 53	BCSR_INTSET,
 54	BCSR_MASKCLR,
 55	BCSR_MASKSET,
 56	BCSR_SIGSTAT,
 57	BCSR_INTSTAT,
 58
 59	/* BCSR base 2 */
 60	BCSR_HEXLEDS,
 61	BCSR_RSVD1,
 62	BCSR_HEXCLEAR,
 63
 64	BCSR_CNT,
 65};
 66
 67/* register offsets, valid for all Db1xxx/Pb1xxx boards */
 68#define BCSR_REG_WHOAMI		0x00
 69#define BCSR_REG_STATUS		0x04
 70#define BCSR_REG_SWITCHES	0x08
 71#define BCSR_REG_RESETS		0x0c
 72#define BCSR_REG_PCMCIA		0x10
 73#define BCSR_REG_BOARD		0x14
 74#define BCSR_REG_LEDS		0x18
 75#define BCSR_REG_SYSTEM		0x1c
 76/* Au1200/Au1300 based boards: CPLD IRQ muxer */
 77#define BCSR_REG_INTCLR		0x20
 78#define BCSR_REG_INTSET		0x24
 79#define BCSR_REG_MASKCLR	0x28
 80#define BCSR_REG_MASKSET	0x2c
 81#define BCSR_REG_SIGSTAT	0x30
 82#define BCSR_REG_INTSTAT	0x34
 83
 84/* hexled control, offset from BCSR base 2 */
 85#define BCSR_REG_HEXLEDS	0x00
 86#define BCSR_REG_HEXCLEAR	0x08
 87
 88/*
 89 * Register Bits and Pieces.
 90 */
 91#define BCSR_WHOAMI_DCID(x)		((x) & 0xf)
 92#define BCSR_WHOAMI_CPLD(x)		(((x) >> 4) & 0xf)
 93#define BCSR_WHOAMI_BOARD(x)		(((x) >> 8) & 0xf)
 94
 95/* register "WHOAMI" bits 11:8 identify the board */
 96enum bcsr_whoami_boards {
 97	BCSR_WHOAMI_PB1500 = 1,
 98	BCSR_WHOAMI_PB1500R2,
 99	BCSR_WHOAMI_PB1100,
100	BCSR_WHOAMI_DB1000,
101	BCSR_WHOAMI_DB1100,
102	BCSR_WHOAMI_DB1500,
103	BCSR_WHOAMI_DB1550,
104	BCSR_WHOAMI_PB1550_DDR,
105	BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR,
106	BCSR_WHOAMI_PB1550_SDR,
107	BCSR_WHOAMI_PB1200_DDR1,
108	BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
109	BCSR_WHOAMI_PB1200_DDR2,
110	BCSR_WHOAMI_DB1200,
111	BCSR_WHOAMI_DB1300,
112};
113
114/* STATUS reg.	Unless otherwise noted, they're valid on all boards.
115 * PB1200 = DB1200.
116 */
117#define BCSR_STATUS_PC0VS		0x0003
118#define BCSR_STATUS_PC1VS		0x000C
119#define BCSR_STATUS_PC0FI		0x0010
120#define BCSR_STATUS_PC1FI		0x0020
121#define BCSR_STATUS_PB1550_SWAPBOOT	0x0040
122#define BCSR_STATUS_SRAMWIDTH		0x0080
123#define BCSR_STATUS_FLASHBUSY		0x0100
124#define BCSR_STATUS_ROMBUSY		0x0400
125#define BCSR_STATUS_SD0WP		0x0400	/* DB1200/DB1300:SD1 */
126#define BCSR_STATUS_SD1WP		0x0800
127#define BCSR_STATUS_USBOTGID		0x0800	/* PB/DB1550 */
128#define BCSR_STATUS_DB1000_SWAPBOOT	0x2000
129#define BCSR_STATUS_DB1200_SWAPBOOT	0x0040	/* DB1200/1300 */
130#define BCSR_STATUS_IDECBLID		0x0200	/* DB1200/1300 */
131#define BCSR_STATUS_DB1200_U0RXD	0x1000	/* DB1200 */
132#define BCSR_STATUS_DB1200_U1RXD	0x2000	/* DB1200 */
133#define BCSR_STATUS_FLASHDEN		0xC000
134#define BCSR_STATUS_DB1550_U0RXD	0x1000	/* DB1550 */
135#define BCSR_STATUS_DB1550_U3RXD	0x2000	/* DB1550 */
136#define BCSR_STATUS_PB1550_U0RXD	0x1000	/* PB1550 */
137#define BCSR_STATUS_PB1550_U1RXD	0x2000	/* PB1550 */
138#define BCSR_STATUS_PB1550_U3RXD	0x8000	/* PB1550 */
139
140#define BCSR_STATUS_CFWP		0x4000	/* DB1300 */
141#define BCSR_STATUS_USBOCn		0x2000	/* DB1300 */
142#define BCSR_STATUS_OTGOCn		0x1000	/* DB1300 */
143#define BCSR_STATUS_DCDMARQ		0x0010	/* DB1300 */
144#define BCSR_STATUS_IDEDMARQ		0x0020	/* DB1300 */
145
146/* DB/PB1000,1100,1500,1550 */
147#define BCSR_RESETS_PHY0		0x0001
148#define BCSR_RESETS_PHY1		0x0002
149#define BCSR_RESETS_DC			0x0004
150#define BCSR_RESETS_FIR_SEL		0x2000
151#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
152#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
153#define BCSR_RESETS_PB1550_WSCFSM	0x2000
154#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
155#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
156#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
157#define BCSR_RESETS_DMAREQ		0x8000	/* PB1550 */
158
159#define BCSR_BOARD_PCIM66EN		0x0001
160#define BCSR_BOARD_SD0PWR		0x0040
161#define BCSR_BOARD_SD1PWR		0x0080
162#define BCSR_BOARD_PCIM33		0x0100
163#define BCSR_BOARD_PCIEXTARB		0x0200
164#define BCSR_BOARD_GPIO200RST		0x0400
165#define BCSR_BOARD_PCICLKOUT		0x0800
166#define BCSR_BOARD_PB1100_SD0PWR	0x0400
167#define BCSR_BOARD_PB1100_SD1PWR	0x0800
168#define BCSR_BOARD_PCICFG		0x1000
169#define BCSR_BOARD_SPISEL		0x2000	/* PB/DB1550 */
170#define BCSR_BOARD_SD0WP		0x4000	/* DB1100 */
171#define BCSR_BOARD_SD1WP		0x8000	/* DB1100 */
172
173
174/* DB/PB1200/1300 */
175#define BCSR_RESETS_ETH			0x0001
176#define BCSR_RESETS_CAMERA		0x0002
177#define BCSR_RESETS_DC			0x0004
178#define BCSR_RESETS_IDE			0x0008
179#define BCSR_RESETS_TV			0x0010	/* DB1200/1300 */
180/* Not resets but in the same register */
181#define BCSR_RESETS_PWMR1MUX		0x0800	/* DB1200 */
182#define BCSR_RESETS_PB1200_WSCFSM	0x0800	/* PB1200 */
183#define BCSR_RESETS_PSC0MUX		0x1000
184#define BCSR_RESETS_PSC1MUX		0x2000
185#define BCSR_RESETS_SPISEL		0x4000
186#define BCSR_RESETS_SD1MUX		0x8000	/* PB1200 */
187
188#define BCSR_RESETS_VDDQSHDN		0x0200	/* DB1300 */
189#define BCSR_RESETS_OTPPGM		0x0400	/* DB1300 */
190#define BCSR_RESETS_OTPSCLK		0x0800	/* DB1300 */
191#define BCSR_RESETS_OTPWRPROT		0x1000	/* DB1300 */
192#define BCSR_RESETS_OTPCSB		0x2000	/* DB1300 */
193#define BCSR_RESETS_OTGPWR		0x4000	/* DB1300 */
194#define BCSR_RESETS_USBHPWR		0x8000	/* DB1300 */
195
196#define BCSR_BOARD_LCDVEE		0x0001
197#define BCSR_BOARD_LCDVDD		0x0002
198#define BCSR_BOARD_LCDBL		0x0004
199#define BCSR_BOARD_CAMSNAP		0x0010
200#define BCSR_BOARD_CAMPWR		0x0020
201#define BCSR_BOARD_SD0PWR		0x0040
202#define BCSR_BOARD_CAMCS		0x0010	/* DB1300 */
203#define BCSR_BOARD_HDMI_DE		0x0040	/* DB1300 */
204
205#define BCSR_SWITCHES_DIP		0x00FF
206#define BCSR_SWITCHES_DIP_1		0x0080
207#define BCSR_SWITCHES_DIP_2		0x0040
208#define BCSR_SWITCHES_DIP_3		0x0020
209#define BCSR_SWITCHES_DIP_4		0x0010
210#define BCSR_SWITCHES_DIP_5		0x0008
211#define BCSR_SWITCHES_DIP_6		0x0004
212#define BCSR_SWITCHES_DIP_7		0x0002
213#define BCSR_SWITCHES_DIP_8		0x0001
214#define BCSR_SWITCHES_ROTARY		0x0F00
215
216
217#define BCSR_PCMCIA_PC0VPP		0x0003
218#define BCSR_PCMCIA_PC0VCC		0x000C
219#define BCSR_PCMCIA_PC0DRVEN		0x0010
220#define BCSR_PCMCIA_PC0RST		0x0080
221#define BCSR_PCMCIA_PC1VPP		0x0300
222#define BCSR_PCMCIA_PC1VCC		0x0C00
223#define BCSR_PCMCIA_PC1DRVEN		0x1000
224#define BCSR_PCMCIA_PC1RST		0x8000
225
226
227#define BCSR_LEDS_DECIMALS		0x0003
228#define BCSR_LEDS_LED0			0x0100
229#define BCSR_LEDS_LED1			0x0200
230#define BCSR_LEDS_LED2			0x0400
231#define BCSR_LEDS_LED3			0x0800
232
233
234#define BCSR_SYSTEM_RESET		0x8000	/* clear to reset */
235#define BCSR_SYSTEM_PWROFF		0x4000	/* set to power off */
236#define BCSR_SYSTEM_VDDI		0x001F	/* PB1xxx boards */
237#define BCSR_SYSTEM_DEBUGCSMASK		0x003F	/* DB1300 */
238#define BCSR_SYSTEM_UDMAMODE		0x0100	/* DB1300 */
239#define BCSR_SYSTEM_WAKEONIRQ		0x0200	/* DB1300 */
240#define BCSR_SYSTEM_VDDI1300		0x3C00	/* DB1300 */
241
242
243
244/* initialize BCSR for a board. Provide the PHYSICAL addresses of both
245 * BCSR spaces.
246 */
247void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys);
248
249/* read a board register */
250unsigned short bcsr_read(enum bcsr_id reg);
251
252/* write to a board register */
253void bcsr_write(enum bcsr_id reg, unsigned short val);
254
255/* modify a register. clear bits set in 'clr', set bits set in 'set' */
256void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set);
257
258/* install CPLD IRQ demuxer (DB1200/PB1200) */
259void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq);
260
261#endif