Loading...
1/*
2 * Copyright (C) ST-Ericsson SA 2010
3 *
4 * License Terms: GNU General Public License, version 2
5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
6 */
7
8#include <linux/kernel.h>
9#include <linux/module.h>
10#include <linux/interrupt.h>
11#include <linux/irq.h>
12#include <linux/slab.h>
13#include <linux/i2c.h>
14#include <linux/mfd/core.h>
15#include <linux/mfd/stmpe.h>
16#include "stmpe.h"
17
18static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
19{
20 return stmpe->variant->enable(stmpe, blocks, true);
21}
22
23static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
24{
25 return stmpe->variant->enable(stmpe, blocks, false);
26}
27
28static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
29{
30 int ret;
31
32 ret = i2c_smbus_read_byte_data(stmpe->i2c, reg);
33 if (ret < 0)
34 dev_err(stmpe->dev, "failed to read reg %#x: %d\n",
35 reg, ret);
36
37 dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
38
39 return ret;
40}
41
42static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
43{
44 int ret;
45
46 dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
47
48 ret = i2c_smbus_write_byte_data(stmpe->i2c, reg, val);
49 if (ret < 0)
50 dev_err(stmpe->dev, "failed to write reg %#x: %d\n",
51 reg, ret);
52
53 return ret;
54}
55
56static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
57{
58 int ret;
59
60 ret = __stmpe_reg_read(stmpe, reg);
61 if (ret < 0)
62 return ret;
63
64 ret &= ~mask;
65 ret |= val;
66
67 return __stmpe_reg_write(stmpe, reg, ret);
68}
69
70static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
71 u8 *values)
72{
73 int ret;
74
75 ret = i2c_smbus_read_i2c_block_data(stmpe->i2c, reg, length, values);
76 if (ret < 0)
77 dev_err(stmpe->dev, "failed to read regs %#x: %d\n",
78 reg, ret);
79
80 dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
81 stmpe_dump_bytes("stmpe rd: ", values, length);
82
83 return ret;
84}
85
86static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
87 const u8 *values)
88{
89 int ret;
90
91 dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
92 stmpe_dump_bytes("stmpe wr: ", values, length);
93
94 ret = i2c_smbus_write_i2c_block_data(stmpe->i2c, reg, length,
95 values);
96 if (ret < 0)
97 dev_err(stmpe->dev, "failed to write regs %#x: %d\n",
98 reg, ret);
99
100 return ret;
101}
102
103/**
104 * stmpe_enable - enable blocks on an STMPE device
105 * @stmpe: Device to work on
106 * @blocks: Mask of blocks (enum stmpe_block values) to enable
107 */
108int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
109{
110 int ret;
111
112 mutex_lock(&stmpe->lock);
113 ret = __stmpe_enable(stmpe, blocks);
114 mutex_unlock(&stmpe->lock);
115
116 return ret;
117}
118EXPORT_SYMBOL_GPL(stmpe_enable);
119
120/**
121 * stmpe_disable - disable blocks on an STMPE device
122 * @stmpe: Device to work on
123 * @blocks: Mask of blocks (enum stmpe_block values) to enable
124 */
125int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
126{
127 int ret;
128
129 mutex_lock(&stmpe->lock);
130 ret = __stmpe_disable(stmpe, blocks);
131 mutex_unlock(&stmpe->lock);
132
133 return ret;
134}
135EXPORT_SYMBOL_GPL(stmpe_disable);
136
137/**
138 * stmpe_reg_read() - read a single STMPE register
139 * @stmpe: Device to read from
140 * @reg: Register to read
141 */
142int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
143{
144 int ret;
145
146 mutex_lock(&stmpe->lock);
147 ret = __stmpe_reg_read(stmpe, reg);
148 mutex_unlock(&stmpe->lock);
149
150 return ret;
151}
152EXPORT_SYMBOL_GPL(stmpe_reg_read);
153
154/**
155 * stmpe_reg_write() - write a single STMPE register
156 * @stmpe: Device to write to
157 * @reg: Register to write
158 * @val: Value to write
159 */
160int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
161{
162 int ret;
163
164 mutex_lock(&stmpe->lock);
165 ret = __stmpe_reg_write(stmpe, reg, val);
166 mutex_unlock(&stmpe->lock);
167
168 return ret;
169}
170EXPORT_SYMBOL_GPL(stmpe_reg_write);
171
172/**
173 * stmpe_set_bits() - set the value of a bitfield in a STMPE register
174 * @stmpe: Device to write to
175 * @reg: Register to write
176 * @mask: Mask of bits to set
177 * @val: Value to set
178 */
179int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
180{
181 int ret;
182
183 mutex_lock(&stmpe->lock);
184 ret = __stmpe_set_bits(stmpe, reg, mask, val);
185 mutex_unlock(&stmpe->lock);
186
187 return ret;
188}
189EXPORT_SYMBOL_GPL(stmpe_set_bits);
190
191/**
192 * stmpe_block_read() - read multiple STMPE registers
193 * @stmpe: Device to read from
194 * @reg: First register
195 * @length: Number of registers
196 * @values: Buffer to write to
197 */
198int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
199{
200 int ret;
201
202 mutex_lock(&stmpe->lock);
203 ret = __stmpe_block_read(stmpe, reg, length, values);
204 mutex_unlock(&stmpe->lock);
205
206 return ret;
207}
208EXPORT_SYMBOL_GPL(stmpe_block_read);
209
210/**
211 * stmpe_block_write() - write multiple STMPE registers
212 * @stmpe: Device to write to
213 * @reg: First register
214 * @length: Number of registers
215 * @values: Values to write
216 */
217int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
218 const u8 *values)
219{
220 int ret;
221
222 mutex_lock(&stmpe->lock);
223 ret = __stmpe_block_write(stmpe, reg, length, values);
224 mutex_unlock(&stmpe->lock);
225
226 return ret;
227}
228EXPORT_SYMBOL_GPL(stmpe_block_write);
229
230/**
231 * stmpe_set_altfunc()- set the alternate function for STMPE pins
232 * @stmpe: Device to configure
233 * @pins: Bitmask of pins to affect
234 * @block: block to enable alternate functions for
235 *
236 * @pins is assumed to have a bit set for each of the bits whose alternate
237 * function is to be changed, numbered according to the GPIOXY numbers.
238 *
239 * If the GPIO module is not enabled, this function automatically enables it in
240 * order to perform the change.
241 */
242int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
243{
244 struct stmpe_variant_info *variant = stmpe->variant;
245 u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
246 int af_bits = variant->af_bits;
247 int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
248 int afperreg = 8 / af_bits;
249 int mask = (1 << af_bits) - 1;
250 u8 regs[numregs];
251 int af;
252 int ret;
253
254 mutex_lock(&stmpe->lock);
255
256 ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
257 if (ret < 0)
258 goto out;
259
260 ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
261 if (ret < 0)
262 goto out;
263
264 af = variant->get_altfunc(stmpe, block);
265
266 while (pins) {
267 int pin = __ffs(pins);
268 int regoffset = numregs - (pin / afperreg) - 1;
269 int pos = (pin % afperreg) * (8 / afperreg);
270
271 regs[regoffset] &= ~(mask << pos);
272 regs[regoffset] |= af << pos;
273
274 pins &= ~(1 << pin);
275 }
276
277 ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
278
279out:
280 mutex_unlock(&stmpe->lock);
281 return ret;
282}
283EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
284
285/*
286 * GPIO (all variants)
287 */
288
289static struct resource stmpe_gpio_resources[] = {
290 /* Start and end filled dynamically */
291 {
292 .flags = IORESOURCE_IRQ,
293 },
294};
295
296static struct mfd_cell stmpe_gpio_cell = {
297 .name = "stmpe-gpio",
298 .resources = stmpe_gpio_resources,
299 .num_resources = ARRAY_SIZE(stmpe_gpio_resources),
300};
301
302/*
303 * Keypad (1601, 2401, 2403)
304 */
305
306static struct resource stmpe_keypad_resources[] = {
307 {
308 .name = "KEYPAD",
309 .start = 0,
310 .end = 0,
311 .flags = IORESOURCE_IRQ,
312 },
313 {
314 .name = "KEYPAD_OVER",
315 .start = 1,
316 .end = 1,
317 .flags = IORESOURCE_IRQ,
318 },
319};
320
321static struct mfd_cell stmpe_keypad_cell = {
322 .name = "stmpe-keypad",
323 .resources = stmpe_keypad_resources,
324 .num_resources = ARRAY_SIZE(stmpe_keypad_resources),
325};
326
327/*
328 * Touchscreen (STMPE811)
329 */
330
331static struct resource stmpe_ts_resources[] = {
332 {
333 .name = "TOUCH_DET",
334 .start = 0,
335 .end = 0,
336 .flags = IORESOURCE_IRQ,
337 },
338 {
339 .name = "FIFO_TH",
340 .start = 1,
341 .end = 1,
342 .flags = IORESOURCE_IRQ,
343 },
344};
345
346static struct mfd_cell stmpe_ts_cell = {
347 .name = "stmpe-ts",
348 .resources = stmpe_ts_resources,
349 .num_resources = ARRAY_SIZE(stmpe_ts_resources),
350};
351
352/*
353 * STMPE811
354 */
355
356static const u8 stmpe811_regs[] = {
357 [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
358 [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
359 [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
360 [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
361 [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
362 [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
363 [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
364 [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
365 [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
366 [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
367 [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
368 [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
369 [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
370 [STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED,
371};
372
373static struct stmpe_variant_block stmpe811_blocks[] = {
374 {
375 .cell = &stmpe_gpio_cell,
376 .irq = STMPE811_IRQ_GPIOC,
377 .block = STMPE_BLOCK_GPIO,
378 },
379 {
380 .cell = &stmpe_ts_cell,
381 .irq = STMPE811_IRQ_TOUCH_DET,
382 .block = STMPE_BLOCK_TOUCHSCREEN,
383 },
384};
385
386static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
387 bool enable)
388{
389 unsigned int mask = 0;
390
391 if (blocks & STMPE_BLOCK_GPIO)
392 mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
393
394 if (blocks & STMPE_BLOCK_ADC)
395 mask |= STMPE811_SYS_CTRL2_ADC_OFF;
396
397 if (blocks & STMPE_BLOCK_TOUCHSCREEN)
398 mask |= STMPE811_SYS_CTRL2_TSC_OFF;
399
400 return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask,
401 enable ? 0 : mask);
402}
403
404static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
405{
406 /* 0 for touchscreen, 1 for GPIO */
407 return block != STMPE_BLOCK_TOUCHSCREEN;
408}
409
410static struct stmpe_variant_info stmpe811 = {
411 .name = "stmpe811",
412 .id_val = 0x0811,
413 .id_mask = 0xffff,
414 .num_gpios = 8,
415 .af_bits = 1,
416 .regs = stmpe811_regs,
417 .blocks = stmpe811_blocks,
418 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
419 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
420 .enable = stmpe811_enable,
421 .get_altfunc = stmpe811_get_altfunc,
422};
423
424/*
425 * STMPE1601
426 */
427
428static const u8 stmpe1601_regs[] = {
429 [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
430 [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
431 [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
432 [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
433 [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
434 [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
435 [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
436 [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
437 [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
438 [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
439 [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
440 [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
441 [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
442 [STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB,
443};
444
445static struct stmpe_variant_block stmpe1601_blocks[] = {
446 {
447 .cell = &stmpe_gpio_cell,
448 .irq = STMPE24XX_IRQ_GPIOC,
449 .block = STMPE_BLOCK_GPIO,
450 },
451 {
452 .cell = &stmpe_keypad_cell,
453 .irq = STMPE24XX_IRQ_KEYPAD,
454 .block = STMPE_BLOCK_KEYPAD,
455 },
456};
457
458/* supported autosleep timeout delay (in msecs) */
459static const int stmpe_autosleep_delay[] = {
460 4, 16, 32, 64, 128, 256, 512, 1024,
461};
462
463static int stmpe_round_timeout(int timeout)
464{
465 int i;
466
467 for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
468 if (stmpe_autosleep_delay[i] >= timeout)
469 return i;
470 }
471
472 /*
473 * requests for delays longer than supported should not return the
474 * longest supported delay
475 */
476 return -EINVAL;
477}
478
479static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
480{
481 int ret;
482
483 if (!stmpe->variant->enable_autosleep)
484 return -ENOSYS;
485
486 mutex_lock(&stmpe->lock);
487 ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
488 mutex_unlock(&stmpe->lock);
489
490 return ret;
491}
492
493/*
494 * Both stmpe 1601/2403 support same layout for autosleep
495 */
496static int stmpe1601_autosleep(struct stmpe *stmpe,
497 int autosleep_timeout)
498{
499 int ret, timeout;
500
501 /* choose the best available timeout */
502 timeout = stmpe_round_timeout(autosleep_timeout);
503 if (timeout < 0) {
504 dev_err(stmpe->dev, "invalid timeout\n");
505 return timeout;
506 }
507
508 ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
509 STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
510 timeout);
511 if (ret < 0)
512 return ret;
513
514 return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
515 STPME1601_AUTOSLEEP_ENABLE,
516 STPME1601_AUTOSLEEP_ENABLE);
517}
518
519static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
520 bool enable)
521{
522 unsigned int mask = 0;
523
524 if (blocks & STMPE_BLOCK_GPIO)
525 mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
526
527 if (blocks & STMPE_BLOCK_KEYPAD)
528 mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
529
530 return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
531 enable ? mask : 0);
532}
533
534static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
535{
536 switch (block) {
537 case STMPE_BLOCK_PWM:
538 return 2;
539
540 case STMPE_BLOCK_KEYPAD:
541 return 1;
542
543 case STMPE_BLOCK_GPIO:
544 default:
545 return 0;
546 }
547}
548
549static struct stmpe_variant_info stmpe1601 = {
550 .name = "stmpe1601",
551 .id_val = 0x0210,
552 .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
553 .num_gpios = 16,
554 .af_bits = 2,
555 .regs = stmpe1601_regs,
556 .blocks = stmpe1601_blocks,
557 .num_blocks = ARRAY_SIZE(stmpe1601_blocks),
558 .num_irqs = STMPE1601_NR_INTERNAL_IRQS,
559 .enable = stmpe1601_enable,
560 .get_altfunc = stmpe1601_get_altfunc,
561 .enable_autosleep = stmpe1601_autosleep,
562};
563
564/*
565 * STMPE24XX
566 */
567
568static const u8 stmpe24xx_regs[] = {
569 [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
570 [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
571 [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
572 [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
573 [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
574 [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
575 [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
576 [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
577 [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
578 [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
579 [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
580 [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
581 [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
582 [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
583};
584
585static struct stmpe_variant_block stmpe24xx_blocks[] = {
586 {
587 .cell = &stmpe_gpio_cell,
588 .irq = STMPE24XX_IRQ_GPIOC,
589 .block = STMPE_BLOCK_GPIO,
590 },
591 {
592 .cell = &stmpe_keypad_cell,
593 .irq = STMPE24XX_IRQ_KEYPAD,
594 .block = STMPE_BLOCK_KEYPAD,
595 },
596};
597
598static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
599 bool enable)
600{
601 unsigned int mask = 0;
602
603 if (blocks & STMPE_BLOCK_GPIO)
604 mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
605
606 if (blocks & STMPE_BLOCK_KEYPAD)
607 mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
608
609 return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask,
610 enable ? mask : 0);
611}
612
613static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
614{
615 switch (block) {
616 case STMPE_BLOCK_ROTATOR:
617 return 2;
618
619 case STMPE_BLOCK_KEYPAD:
620 return 1;
621
622 case STMPE_BLOCK_GPIO:
623 default:
624 return 0;
625 }
626}
627
628static struct stmpe_variant_info stmpe2401 = {
629 .name = "stmpe2401",
630 .id_val = 0x0101,
631 .id_mask = 0xffff,
632 .num_gpios = 24,
633 .af_bits = 2,
634 .regs = stmpe24xx_regs,
635 .blocks = stmpe24xx_blocks,
636 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
637 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
638 .enable = stmpe24xx_enable,
639 .get_altfunc = stmpe24xx_get_altfunc,
640};
641
642static struct stmpe_variant_info stmpe2403 = {
643 .name = "stmpe2403",
644 .id_val = 0x0120,
645 .id_mask = 0xffff,
646 .num_gpios = 24,
647 .af_bits = 2,
648 .regs = stmpe24xx_regs,
649 .blocks = stmpe24xx_blocks,
650 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
651 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
652 .enable = stmpe24xx_enable,
653 .get_altfunc = stmpe24xx_get_altfunc,
654 .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
655};
656
657static struct stmpe_variant_info *stmpe_variant_info[] = {
658 [STMPE811] = &stmpe811,
659 [STMPE1601] = &stmpe1601,
660 [STMPE2401] = &stmpe2401,
661 [STMPE2403] = &stmpe2403,
662};
663
664static irqreturn_t stmpe_irq(int irq, void *data)
665{
666 struct stmpe *stmpe = data;
667 struct stmpe_variant_info *variant = stmpe->variant;
668 int num = DIV_ROUND_UP(variant->num_irqs, 8);
669 u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
670 u8 isr[num];
671 int ret;
672 int i;
673
674 ret = stmpe_block_read(stmpe, israddr, num, isr);
675 if (ret < 0)
676 return IRQ_NONE;
677
678 for (i = 0; i < num; i++) {
679 int bank = num - i - 1;
680 u8 status = isr[i];
681 u8 clear;
682
683 status &= stmpe->ier[bank];
684 if (!status)
685 continue;
686
687 clear = status;
688 while (status) {
689 int bit = __ffs(status);
690 int line = bank * 8 + bit;
691
692 handle_nested_irq(stmpe->irq_base + line);
693 status &= ~(1 << bit);
694 }
695
696 stmpe_reg_write(stmpe, israddr + i, clear);
697 }
698
699 return IRQ_HANDLED;
700}
701
702static void stmpe_irq_lock(struct irq_data *data)
703{
704 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
705
706 mutex_lock(&stmpe->irq_lock);
707}
708
709static void stmpe_irq_sync_unlock(struct irq_data *data)
710{
711 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
712 struct stmpe_variant_info *variant = stmpe->variant;
713 int num = DIV_ROUND_UP(variant->num_irqs, 8);
714 int i;
715
716 for (i = 0; i < num; i++) {
717 u8 new = stmpe->ier[i];
718 u8 old = stmpe->oldier[i];
719
720 if (new == old)
721 continue;
722
723 stmpe->oldier[i] = new;
724 stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new);
725 }
726
727 mutex_unlock(&stmpe->irq_lock);
728}
729
730static void stmpe_irq_mask(struct irq_data *data)
731{
732 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
733 int offset = data->irq - stmpe->irq_base;
734 int regoffset = offset / 8;
735 int mask = 1 << (offset % 8);
736
737 stmpe->ier[regoffset] &= ~mask;
738}
739
740static void stmpe_irq_unmask(struct irq_data *data)
741{
742 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
743 int offset = data->irq - stmpe->irq_base;
744 int regoffset = offset / 8;
745 int mask = 1 << (offset % 8);
746
747 stmpe->ier[regoffset] |= mask;
748}
749
750static struct irq_chip stmpe_irq_chip = {
751 .name = "stmpe",
752 .irq_bus_lock = stmpe_irq_lock,
753 .irq_bus_sync_unlock = stmpe_irq_sync_unlock,
754 .irq_mask = stmpe_irq_mask,
755 .irq_unmask = stmpe_irq_unmask,
756};
757
758static int __devinit stmpe_irq_init(struct stmpe *stmpe)
759{
760 int num_irqs = stmpe->variant->num_irqs;
761 int base = stmpe->irq_base;
762 int irq;
763
764 for (irq = base; irq < base + num_irqs; irq++) {
765 irq_set_chip_data(irq, stmpe);
766 irq_set_chip_and_handler(irq, &stmpe_irq_chip,
767 handle_edge_irq);
768 irq_set_nested_thread(irq, 1);
769#ifdef CONFIG_ARM
770 set_irq_flags(irq, IRQF_VALID);
771#else
772 irq_set_noprobe(irq);
773#endif
774 }
775
776 return 0;
777}
778
779static void stmpe_irq_remove(struct stmpe *stmpe)
780{
781 int num_irqs = stmpe->variant->num_irqs;
782 int base = stmpe->irq_base;
783 int irq;
784
785 for (irq = base; irq < base + num_irqs; irq++) {
786#ifdef CONFIG_ARM
787 set_irq_flags(irq, 0);
788#endif
789 irq_set_chip_and_handler(irq, NULL, NULL);
790 irq_set_chip_data(irq, NULL);
791 }
792}
793
794static int __devinit stmpe_chip_init(struct stmpe *stmpe)
795{
796 unsigned int irq_trigger = stmpe->pdata->irq_trigger;
797 int autosleep_timeout = stmpe->pdata->autosleep_timeout;
798 struct stmpe_variant_info *variant = stmpe->variant;
799 u8 icr = STMPE_ICR_LSB_GIM;
800 unsigned int id;
801 u8 data[2];
802 int ret;
803
804 ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
805 ARRAY_SIZE(data), data);
806 if (ret < 0)
807 return ret;
808
809 id = (data[0] << 8) | data[1];
810 if ((id & variant->id_mask) != variant->id_val) {
811 dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
812 return -EINVAL;
813 }
814
815 dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
816
817 /* Disable all modules -- subdrivers should enable what they need. */
818 ret = stmpe_disable(stmpe, ~0);
819 if (ret)
820 return ret;
821
822 if (irq_trigger == IRQF_TRIGGER_FALLING ||
823 irq_trigger == IRQF_TRIGGER_RISING)
824 icr |= STMPE_ICR_LSB_EDGE;
825
826 if (irq_trigger == IRQF_TRIGGER_RISING ||
827 irq_trigger == IRQF_TRIGGER_HIGH)
828 icr |= STMPE_ICR_LSB_HIGH;
829
830 if (stmpe->pdata->irq_invert_polarity)
831 icr ^= STMPE_ICR_LSB_HIGH;
832
833 if (stmpe->pdata->autosleep) {
834 ret = stmpe_autosleep(stmpe, autosleep_timeout);
835 if (ret)
836 return ret;
837 }
838
839 return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
840}
841
842static int __devinit stmpe_add_device(struct stmpe *stmpe,
843 struct mfd_cell *cell, int irq)
844{
845 return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
846 NULL, stmpe->irq_base + irq);
847}
848
849static int __devinit stmpe_devices_init(struct stmpe *stmpe)
850{
851 struct stmpe_variant_info *variant = stmpe->variant;
852 unsigned int platform_blocks = stmpe->pdata->blocks;
853 int ret = -EINVAL;
854 int i;
855
856 for (i = 0; i < variant->num_blocks; i++) {
857 struct stmpe_variant_block *block = &variant->blocks[i];
858
859 if (!(platform_blocks & block->block))
860 continue;
861
862 platform_blocks &= ~block->block;
863 ret = stmpe_add_device(stmpe, block->cell, block->irq);
864 if (ret)
865 return ret;
866 }
867
868 if (platform_blocks)
869 dev_warn(stmpe->dev,
870 "platform wants blocks (%#x) not present on variant",
871 platform_blocks);
872
873 return ret;
874}
875
876#ifdef CONFIG_PM
877static int stmpe_suspend(struct device *dev)
878{
879 struct i2c_client *i2c = to_i2c_client(dev);
880
881 if (device_may_wakeup(&i2c->dev))
882 enable_irq_wake(i2c->irq);
883
884 return 0;
885}
886
887static int stmpe_resume(struct device *dev)
888{
889 struct i2c_client *i2c = to_i2c_client(dev);
890
891 if (device_may_wakeup(&i2c->dev))
892 disable_irq_wake(i2c->irq);
893
894 return 0;
895}
896#endif
897
898static int __devinit stmpe_probe(struct i2c_client *i2c,
899 const struct i2c_device_id *id)
900{
901 struct stmpe_platform_data *pdata = i2c->dev.platform_data;
902 struct stmpe *stmpe;
903 int ret;
904
905 if (!pdata)
906 return -EINVAL;
907
908 stmpe = kzalloc(sizeof(struct stmpe), GFP_KERNEL);
909 if (!stmpe)
910 return -ENOMEM;
911
912 mutex_init(&stmpe->irq_lock);
913 mutex_init(&stmpe->lock);
914
915 stmpe->dev = &i2c->dev;
916 stmpe->i2c = i2c;
917
918 stmpe->pdata = pdata;
919 stmpe->irq_base = pdata->irq_base;
920
921 stmpe->partnum = id->driver_data;
922 stmpe->variant = stmpe_variant_info[stmpe->partnum];
923 stmpe->regs = stmpe->variant->regs;
924 stmpe->num_gpios = stmpe->variant->num_gpios;
925
926 i2c_set_clientdata(i2c, stmpe);
927
928 ret = stmpe_chip_init(stmpe);
929 if (ret)
930 goto out_free;
931
932 ret = stmpe_irq_init(stmpe);
933 if (ret)
934 goto out_free;
935
936 ret = request_threaded_irq(stmpe->i2c->irq, NULL, stmpe_irq,
937 pdata->irq_trigger | IRQF_ONESHOT,
938 "stmpe", stmpe);
939 if (ret) {
940 dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret);
941 goto out_removeirq;
942 }
943
944 ret = stmpe_devices_init(stmpe);
945 if (ret) {
946 dev_err(stmpe->dev, "failed to add children\n");
947 goto out_removedevs;
948 }
949
950 return 0;
951
952out_removedevs:
953 mfd_remove_devices(stmpe->dev);
954 free_irq(stmpe->i2c->irq, stmpe);
955out_removeirq:
956 stmpe_irq_remove(stmpe);
957out_free:
958 kfree(stmpe);
959 return ret;
960}
961
962static int __devexit stmpe_remove(struct i2c_client *client)
963{
964 struct stmpe *stmpe = i2c_get_clientdata(client);
965
966 mfd_remove_devices(stmpe->dev);
967
968 free_irq(stmpe->i2c->irq, stmpe);
969 stmpe_irq_remove(stmpe);
970
971 kfree(stmpe);
972
973 return 0;
974}
975
976static const struct i2c_device_id stmpe_id[] = {
977 { "stmpe811", STMPE811 },
978 { "stmpe1601", STMPE1601 },
979 { "stmpe2401", STMPE2401 },
980 { "stmpe2403", STMPE2403 },
981 { }
982};
983MODULE_DEVICE_TABLE(i2c, stmpe_id);
984
985#ifdef CONFIG_PM
986static const struct dev_pm_ops stmpe_dev_pm_ops = {
987 .suspend = stmpe_suspend,
988 .resume = stmpe_resume,
989};
990#endif
991
992static struct i2c_driver stmpe_driver = {
993 .driver.name = "stmpe",
994 .driver.owner = THIS_MODULE,
995#ifdef CONFIG_PM
996 .driver.pm = &stmpe_dev_pm_ops,
997#endif
998 .probe = stmpe_probe,
999 .remove = __devexit_p(stmpe_remove),
1000 .id_table = stmpe_id,
1001};
1002
1003static int __init stmpe_init(void)
1004{
1005 return i2c_add_driver(&stmpe_driver);
1006}
1007subsys_initcall(stmpe_init);
1008
1009static void __exit stmpe_exit(void)
1010{
1011 i2c_del_driver(&stmpe_driver);
1012}
1013module_exit(stmpe_exit);
1014
1015MODULE_LICENSE("GPL v2");
1016MODULE_DESCRIPTION("STMPE MFD core driver");
1017MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * ST Microelectronics MFD: stmpe's driver
4 *
5 * Copyright (C) ST-Ericsson SA 2010
6 *
7 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
8 */
9
10#include <linux/err.h>
11#include <linux/gpio/consumer.h>
12#include <linux/export.h>
13#include <linux/kernel.h>
14#include <linux/interrupt.h>
15#include <linux/irq.h>
16#include <linux/irqdomain.h>
17#include <linux/of.h>
18#include <linux/pm.h>
19#include <linux/slab.h>
20#include <linux/mfd/core.h>
21#include <linux/delay.h>
22#include <linux/regulator/consumer.h>
23#include "stmpe.h"
24
25/**
26 * struct stmpe_platform_data - STMPE platform data
27 * @id: device id to distinguish between multiple STMPEs on the same board
28 * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
29 * @irq_trigger: IRQ trigger to use for the interrupt to the host
30 * @autosleep: bool to enable/disable stmpe autosleep
31 * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
32 */
33struct stmpe_platform_data {
34 int id;
35 unsigned int blocks;
36 unsigned int irq_trigger;
37 bool autosleep;
38 int autosleep_timeout;
39};
40
41static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
42{
43 return stmpe->variant->enable(stmpe, blocks, true);
44}
45
46static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
47{
48 return stmpe->variant->enable(stmpe, blocks, false);
49}
50
51static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
52{
53 int ret;
54
55 ret = stmpe->ci->read_byte(stmpe, reg);
56 if (ret < 0)
57 dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
58
59 dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
60
61 return ret;
62}
63
64static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
65{
66 int ret;
67
68 dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
69
70 ret = stmpe->ci->write_byte(stmpe, reg, val);
71 if (ret < 0)
72 dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
73
74 return ret;
75}
76
77static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
78{
79 int ret;
80
81 ret = __stmpe_reg_read(stmpe, reg);
82 if (ret < 0)
83 return ret;
84
85 ret &= ~mask;
86 ret |= val;
87
88 return __stmpe_reg_write(stmpe, reg, ret);
89}
90
91static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
92 u8 *values)
93{
94 int ret;
95
96 ret = stmpe->ci->read_block(stmpe, reg, length, values);
97 if (ret < 0)
98 dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
99
100 dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
101 stmpe_dump_bytes("stmpe rd: ", values, length);
102
103 return ret;
104}
105
106static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
107 const u8 *values)
108{
109 int ret;
110
111 dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
112 stmpe_dump_bytes("stmpe wr: ", values, length);
113
114 ret = stmpe->ci->write_block(stmpe, reg, length, values);
115 if (ret < 0)
116 dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
117
118 return ret;
119}
120
121/**
122 * stmpe_enable - enable blocks on an STMPE device
123 * @stmpe: Device to work on
124 * @blocks: Mask of blocks (enum stmpe_block values) to enable
125 */
126int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
127{
128 int ret;
129
130 mutex_lock(&stmpe->lock);
131 ret = __stmpe_enable(stmpe, blocks);
132 mutex_unlock(&stmpe->lock);
133
134 return ret;
135}
136EXPORT_SYMBOL_GPL(stmpe_enable);
137
138/**
139 * stmpe_disable - disable blocks on an STMPE device
140 * @stmpe: Device to work on
141 * @blocks: Mask of blocks (enum stmpe_block values) to enable
142 */
143int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
144{
145 int ret;
146
147 mutex_lock(&stmpe->lock);
148 ret = __stmpe_disable(stmpe, blocks);
149 mutex_unlock(&stmpe->lock);
150
151 return ret;
152}
153EXPORT_SYMBOL_GPL(stmpe_disable);
154
155/**
156 * stmpe_reg_read() - read a single STMPE register
157 * @stmpe: Device to read from
158 * @reg: Register to read
159 */
160int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
161{
162 int ret;
163
164 mutex_lock(&stmpe->lock);
165 ret = __stmpe_reg_read(stmpe, reg);
166 mutex_unlock(&stmpe->lock);
167
168 return ret;
169}
170EXPORT_SYMBOL_GPL(stmpe_reg_read);
171
172/**
173 * stmpe_reg_write() - write a single STMPE register
174 * @stmpe: Device to write to
175 * @reg: Register to write
176 * @val: Value to write
177 */
178int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
179{
180 int ret;
181
182 mutex_lock(&stmpe->lock);
183 ret = __stmpe_reg_write(stmpe, reg, val);
184 mutex_unlock(&stmpe->lock);
185
186 return ret;
187}
188EXPORT_SYMBOL_GPL(stmpe_reg_write);
189
190/**
191 * stmpe_set_bits() - set the value of a bitfield in a STMPE register
192 * @stmpe: Device to write to
193 * @reg: Register to write
194 * @mask: Mask of bits to set
195 * @val: Value to set
196 */
197int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
198{
199 int ret;
200
201 mutex_lock(&stmpe->lock);
202 ret = __stmpe_set_bits(stmpe, reg, mask, val);
203 mutex_unlock(&stmpe->lock);
204
205 return ret;
206}
207EXPORT_SYMBOL_GPL(stmpe_set_bits);
208
209/**
210 * stmpe_block_read() - read multiple STMPE registers
211 * @stmpe: Device to read from
212 * @reg: First register
213 * @length: Number of registers
214 * @values: Buffer to write to
215 */
216int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
217{
218 int ret;
219
220 mutex_lock(&stmpe->lock);
221 ret = __stmpe_block_read(stmpe, reg, length, values);
222 mutex_unlock(&stmpe->lock);
223
224 return ret;
225}
226EXPORT_SYMBOL_GPL(stmpe_block_read);
227
228/**
229 * stmpe_block_write() - write multiple STMPE registers
230 * @stmpe: Device to write to
231 * @reg: First register
232 * @length: Number of registers
233 * @values: Values to write
234 */
235int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
236 const u8 *values)
237{
238 int ret;
239
240 mutex_lock(&stmpe->lock);
241 ret = __stmpe_block_write(stmpe, reg, length, values);
242 mutex_unlock(&stmpe->lock);
243
244 return ret;
245}
246EXPORT_SYMBOL_GPL(stmpe_block_write);
247
248/**
249 * stmpe_set_altfunc()- set the alternate function for STMPE pins
250 * @stmpe: Device to configure
251 * @pins: Bitmask of pins to affect
252 * @block: block to enable alternate functions for
253 *
254 * @pins is assumed to have a bit set for each of the bits whose alternate
255 * function is to be changed, numbered according to the GPIOXY numbers.
256 *
257 * If the GPIO module is not enabled, this function automatically enables it in
258 * order to perform the change.
259 */
260int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
261{
262 struct stmpe_variant_info *variant = stmpe->variant;
263 u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
264 int af_bits = variant->af_bits;
265 int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
266 int mask = (1 << af_bits) - 1;
267 u8 regs[8];
268 int af, afperreg, ret;
269
270 if (!variant->get_altfunc)
271 return 0;
272
273 afperreg = 8 / af_bits;
274 mutex_lock(&stmpe->lock);
275
276 ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
277 if (ret < 0)
278 goto out;
279
280 ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
281 if (ret < 0)
282 goto out;
283
284 af = variant->get_altfunc(stmpe, block);
285
286 while (pins) {
287 int pin = __ffs(pins);
288 int regoffset = numregs - (pin / afperreg) - 1;
289 int pos = (pin % afperreg) * (8 / afperreg);
290
291 regs[regoffset] &= ~(mask << pos);
292 regs[regoffset] |= af << pos;
293
294 pins &= ~(1 << pin);
295 }
296
297 ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
298
299out:
300 mutex_unlock(&stmpe->lock);
301 return ret;
302}
303EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
304
305/*
306 * GPIO (all variants)
307 */
308
309static struct resource stmpe_gpio_resources[] = {
310 /* Start and end filled dynamically */
311 {
312 .flags = IORESOURCE_IRQ,
313 },
314};
315
316static const struct mfd_cell stmpe_gpio_cell = {
317 .name = "stmpe-gpio",
318 .of_compatible = "st,stmpe-gpio",
319 .resources = stmpe_gpio_resources,
320 .num_resources = ARRAY_SIZE(stmpe_gpio_resources),
321};
322
323static const struct mfd_cell stmpe_gpio_cell_noirq = {
324 .name = "stmpe-gpio",
325 .of_compatible = "st,stmpe-gpio",
326 /* gpio cell resources consist of an irq only so no resources here */
327};
328
329/*
330 * Keypad (1601, 2401, 2403)
331 */
332
333static struct resource stmpe_keypad_resources[] = {
334 /* Start and end filled dynamically */
335 {
336 .name = "KEYPAD",
337 .flags = IORESOURCE_IRQ,
338 },
339 {
340 .name = "KEYPAD_OVER",
341 .flags = IORESOURCE_IRQ,
342 },
343};
344
345static const struct mfd_cell stmpe_keypad_cell = {
346 .name = "stmpe-keypad",
347 .of_compatible = "st,stmpe-keypad",
348 .resources = stmpe_keypad_resources,
349 .num_resources = ARRAY_SIZE(stmpe_keypad_resources),
350};
351
352/*
353 * PWM (1601, 2401, 2403)
354 */
355static struct resource stmpe_pwm_resources[] = {
356 /* Start and end filled dynamically */
357 {
358 .name = "PWM0",
359 .flags = IORESOURCE_IRQ,
360 },
361 {
362 .name = "PWM1",
363 .flags = IORESOURCE_IRQ,
364 },
365 {
366 .name = "PWM2",
367 .flags = IORESOURCE_IRQ,
368 },
369};
370
371static const struct mfd_cell stmpe_pwm_cell = {
372 .name = "stmpe-pwm",
373 .of_compatible = "st,stmpe-pwm",
374 .resources = stmpe_pwm_resources,
375 .num_resources = ARRAY_SIZE(stmpe_pwm_resources),
376};
377
378/*
379 * STMPE801
380 */
381static const u8 stmpe801_regs[] = {
382 [STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID,
383 [STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL,
384 [STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA,
385 [STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN,
386 [STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN,
387 [STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR,
388 [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN,
389 [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA,
390
391};
392
393static struct stmpe_variant_block stmpe801_blocks[] = {
394 {
395 .cell = &stmpe_gpio_cell,
396 .irq = 0,
397 .block = STMPE_BLOCK_GPIO,
398 },
399};
400
401static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
402 {
403 .cell = &stmpe_gpio_cell_noirq,
404 .block = STMPE_BLOCK_GPIO,
405 },
406};
407
408static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
409 bool enable)
410{
411 if (blocks & STMPE_BLOCK_GPIO)
412 return 0;
413 else
414 return -EINVAL;
415}
416
417static struct stmpe_variant_info stmpe801 = {
418 .name = "stmpe801",
419 .id_val = STMPE801_ID,
420 .id_mask = 0xffff,
421 .num_gpios = 8,
422 .regs = stmpe801_regs,
423 .blocks = stmpe801_blocks,
424 .num_blocks = ARRAY_SIZE(stmpe801_blocks),
425 .num_irqs = STMPE801_NR_INTERNAL_IRQS,
426 .enable = stmpe801_enable,
427};
428
429static struct stmpe_variant_info stmpe801_noirq = {
430 .name = "stmpe801",
431 .id_val = STMPE801_ID,
432 .id_mask = 0xffff,
433 .num_gpios = 8,
434 .regs = stmpe801_regs,
435 .blocks = stmpe801_blocks_noirq,
436 .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq),
437 .enable = stmpe801_enable,
438};
439
440/*
441 * Touchscreen (STMPE811 or STMPE610)
442 */
443
444static struct resource stmpe_ts_resources[] = {
445 /* Start and end filled dynamically */
446 {
447 .name = "TOUCH_DET",
448 .flags = IORESOURCE_IRQ,
449 },
450 {
451 .name = "FIFO_TH",
452 .flags = IORESOURCE_IRQ,
453 },
454};
455
456static const struct mfd_cell stmpe_ts_cell = {
457 .name = "stmpe-ts",
458 .of_compatible = "st,stmpe-ts",
459 .resources = stmpe_ts_resources,
460 .num_resources = ARRAY_SIZE(stmpe_ts_resources),
461};
462
463/*
464 * ADC (STMPE811)
465 */
466
467static struct resource stmpe_adc_resources[] = {
468 /* Start and end filled dynamically */
469 {
470 .name = "STMPE_TEMP_SENS",
471 .flags = IORESOURCE_IRQ,
472 },
473 {
474 .name = "STMPE_ADC",
475 .flags = IORESOURCE_IRQ,
476 },
477};
478
479static const struct mfd_cell stmpe_adc_cell = {
480 .name = "stmpe-adc",
481 .of_compatible = "st,stmpe-adc",
482 .resources = stmpe_adc_resources,
483 .num_resources = ARRAY_SIZE(stmpe_adc_resources),
484};
485
486/*
487 * STMPE811 or STMPE610
488 */
489
490static const u8 stmpe811_regs[] = {
491 [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
492 [STMPE_IDX_SYS_CTRL] = STMPE811_REG_SYS_CTRL,
493 [STMPE_IDX_SYS_CTRL2] = STMPE811_REG_SYS_CTRL2,
494 [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
495 [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
496 [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
497 [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
498 [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
499 [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
500 [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
501 [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
502 [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
503 [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
504 [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
505 [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
506 [STMPE_IDX_GPEDR_LSB] = STMPE811_REG_GPIO_ED,
507};
508
509static struct stmpe_variant_block stmpe811_blocks[] = {
510 {
511 .cell = &stmpe_gpio_cell,
512 .irq = STMPE811_IRQ_GPIOC,
513 .block = STMPE_BLOCK_GPIO,
514 },
515 {
516 .cell = &stmpe_ts_cell,
517 .irq = STMPE811_IRQ_TOUCH_DET,
518 .block = STMPE_BLOCK_TOUCHSCREEN,
519 },
520 {
521 .cell = &stmpe_adc_cell,
522 .irq = STMPE811_IRQ_TEMP_SENS,
523 .block = STMPE_BLOCK_ADC,
524 },
525};
526
527static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
528 bool enable)
529{
530 unsigned int mask = 0;
531
532 if (blocks & STMPE_BLOCK_GPIO)
533 mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
534
535 if (blocks & STMPE_BLOCK_ADC)
536 mask |= STMPE811_SYS_CTRL2_ADC_OFF;
537
538 if (blocks & STMPE_BLOCK_TOUCHSCREEN)
539 mask |= STMPE811_SYS_CTRL2_TSC_OFF;
540
541 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], mask,
542 enable ? 0 : mask);
543}
544
545int stmpe811_adc_common_init(struct stmpe *stmpe)
546{
547 int ret;
548 u8 adc_ctrl1, adc_ctrl1_mask;
549
550 adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) |
551 STMPE_MOD_12B(stmpe->mod_12b) |
552 STMPE_REF_SEL(stmpe->ref_sel);
553 adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) |
554 STMPE_REF_SEL(0xff);
555
556 ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1,
557 adc_ctrl1_mask, adc_ctrl1);
558 if (ret) {
559 dev_err(stmpe->dev, "Could not setup ADC\n");
560 return ret;
561 }
562
563 ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2,
564 STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq));
565 if (ret) {
566 dev_err(stmpe->dev, "Could not setup ADC\n");
567 return ret;
568 }
569
570 return 0;
571}
572EXPORT_SYMBOL_GPL(stmpe811_adc_common_init);
573
574static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
575{
576 /* 0 for touchscreen, 1 for GPIO */
577 return block != STMPE_BLOCK_TOUCHSCREEN;
578}
579
580static struct stmpe_variant_info stmpe811 = {
581 .name = "stmpe811",
582 .id_val = 0x0811,
583 .id_mask = 0xffff,
584 .num_gpios = 8,
585 .af_bits = 1,
586 .regs = stmpe811_regs,
587 .blocks = stmpe811_blocks,
588 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
589 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
590 .enable = stmpe811_enable,
591 .get_altfunc = stmpe811_get_altfunc,
592};
593
594/* Similar to 811, except number of gpios */
595static struct stmpe_variant_info stmpe610 = {
596 .name = "stmpe610",
597 .id_val = 0x0811,
598 .id_mask = 0xffff,
599 .num_gpios = 6,
600 .af_bits = 1,
601 .regs = stmpe811_regs,
602 .blocks = stmpe811_blocks,
603 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
604 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
605 .enable = stmpe811_enable,
606 .get_altfunc = stmpe811_get_altfunc,
607};
608
609/*
610 * STMPE1600
611 * Compared to all others STMPE variant, LSB and MSB regs are located in this
612 * order : LSB addr
613 * MSB addr + 1
614 * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
615 */
616
617static const u8 stmpe1600_regs[] = {
618 [STMPE_IDX_CHIP_ID] = STMPE1600_REG_CHIP_ID,
619 [STMPE_IDX_SYS_CTRL] = STMPE1600_REG_SYS_CTRL,
620 [STMPE_IDX_ICR_LSB] = STMPE1600_REG_SYS_CTRL,
621 [STMPE_IDX_GPMR_LSB] = STMPE1600_REG_GPMR_LSB,
622 [STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB,
623 [STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB,
624 [STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB,
625 [STMPE_IDX_GPCR_LSB] = STMPE1600_REG_GPSR_LSB,
626 [STMPE_IDX_GPCR_CSB] = STMPE1600_REG_GPSR_MSB,
627 [STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB,
628 [STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB,
629 [STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB,
630 [STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB,
631 [STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB,
632};
633
634static struct stmpe_variant_block stmpe1600_blocks[] = {
635 {
636 .cell = &stmpe_gpio_cell,
637 .irq = 0,
638 .block = STMPE_BLOCK_GPIO,
639 },
640};
641
642static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
643 bool enable)
644{
645 if (blocks & STMPE_BLOCK_GPIO)
646 return 0;
647 else
648 return -EINVAL;
649}
650
651static struct stmpe_variant_info stmpe1600 = {
652 .name = "stmpe1600",
653 .id_val = STMPE1600_ID,
654 .id_mask = 0xffff,
655 .num_gpios = 16,
656 .af_bits = 0,
657 .regs = stmpe1600_regs,
658 .blocks = stmpe1600_blocks,
659 .num_blocks = ARRAY_SIZE(stmpe1600_blocks),
660 .num_irqs = STMPE1600_NR_INTERNAL_IRQS,
661 .enable = stmpe1600_enable,
662};
663
664/*
665 * STMPE1601
666 */
667
668static const u8 stmpe1601_regs[] = {
669 [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
670 [STMPE_IDX_SYS_CTRL] = STMPE1601_REG_SYS_CTRL,
671 [STMPE_IDX_SYS_CTRL2] = STMPE1601_REG_SYS_CTRL2,
672 [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
673 [STMPE_IDX_IER_MSB] = STMPE1601_REG_IER_MSB,
674 [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
675 [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
676 [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
677 [STMPE_IDX_GPMR_CSB] = STMPE1601_REG_GPIO_MP_MSB,
678 [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
679 [STMPE_IDX_GPSR_CSB] = STMPE1601_REG_GPIO_SET_MSB,
680 [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
681 [STMPE_IDX_GPCR_CSB] = STMPE1601_REG_GPIO_CLR_MSB,
682 [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
683 [STMPE_IDX_GPDR_CSB] = STMPE1601_REG_GPIO_SET_DIR_MSB,
684 [STMPE_IDX_GPEDR_LSB] = STMPE1601_REG_GPIO_ED_LSB,
685 [STMPE_IDX_GPEDR_CSB] = STMPE1601_REG_GPIO_ED_MSB,
686 [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
687 [STMPE_IDX_GPRER_CSB] = STMPE1601_REG_GPIO_RE_MSB,
688 [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
689 [STMPE_IDX_GPFER_CSB] = STMPE1601_REG_GPIO_FE_MSB,
690 [STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB,
691 [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
692 [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
693 [STMPE_IDX_IEGPIOR_CSB] = STMPE1601_REG_INT_EN_GPIO_MASK_MSB,
694 [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
695};
696
697static struct stmpe_variant_block stmpe1601_blocks[] = {
698 {
699 .cell = &stmpe_gpio_cell,
700 .irq = STMPE1601_IRQ_GPIOC,
701 .block = STMPE_BLOCK_GPIO,
702 },
703 {
704 .cell = &stmpe_keypad_cell,
705 .irq = STMPE1601_IRQ_KEYPAD,
706 .block = STMPE_BLOCK_KEYPAD,
707 },
708 {
709 .cell = &stmpe_pwm_cell,
710 .irq = STMPE1601_IRQ_PWM0,
711 .block = STMPE_BLOCK_PWM,
712 },
713};
714
715/* supported autosleep timeout delay (in msecs) */
716static const int stmpe_autosleep_delay[] = {
717 4, 16, 32, 64, 128, 256, 512, 1024,
718};
719
720static int stmpe_round_timeout(int timeout)
721{
722 int i;
723
724 for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
725 if (stmpe_autosleep_delay[i] >= timeout)
726 return i;
727 }
728
729 /*
730 * requests for delays longer than supported should not return the
731 * longest supported delay
732 */
733 return -EINVAL;
734}
735
736static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
737{
738 int ret;
739
740 if (!stmpe->variant->enable_autosleep)
741 return -ENOSYS;
742
743 mutex_lock(&stmpe->lock);
744 ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
745 mutex_unlock(&stmpe->lock);
746
747 return ret;
748}
749
750/*
751 * Both stmpe 1601/2403 support same layout for autosleep
752 */
753static int stmpe1601_autosleep(struct stmpe *stmpe,
754 int autosleep_timeout)
755{
756 int ret, timeout;
757
758 /* choose the best available timeout */
759 timeout = stmpe_round_timeout(autosleep_timeout);
760 if (timeout < 0) {
761 dev_err(stmpe->dev, "invalid timeout\n");
762 return timeout;
763 }
764
765 ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
766 STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
767 timeout);
768 if (ret < 0)
769 return ret;
770
771 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
772 STPME1601_AUTOSLEEP_ENABLE,
773 STPME1601_AUTOSLEEP_ENABLE);
774}
775
776static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
777 bool enable)
778{
779 unsigned int mask = 0;
780
781 if (blocks & STMPE_BLOCK_GPIO)
782 mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
783 else
784 mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
785
786 if (blocks & STMPE_BLOCK_KEYPAD)
787 mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
788 else
789 mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
790
791 if (blocks & STMPE_BLOCK_PWM)
792 mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
793 else
794 mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
795
796 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
797 enable ? mask : 0);
798}
799
800static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
801{
802 switch (block) {
803 case STMPE_BLOCK_PWM:
804 return 2;
805
806 case STMPE_BLOCK_KEYPAD:
807 return 1;
808
809 case STMPE_BLOCK_GPIO:
810 default:
811 return 0;
812 }
813}
814
815static struct stmpe_variant_info stmpe1601 = {
816 .name = "stmpe1601",
817 .id_val = 0x0210,
818 .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
819 .num_gpios = 16,
820 .af_bits = 2,
821 .regs = stmpe1601_regs,
822 .blocks = stmpe1601_blocks,
823 .num_blocks = ARRAY_SIZE(stmpe1601_blocks),
824 .num_irqs = STMPE1601_NR_INTERNAL_IRQS,
825 .enable = stmpe1601_enable,
826 .get_altfunc = stmpe1601_get_altfunc,
827 .enable_autosleep = stmpe1601_autosleep,
828};
829
830/*
831 * STMPE1801
832 */
833static const u8 stmpe1801_regs[] = {
834 [STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID,
835 [STMPE_IDX_SYS_CTRL] = STMPE1801_REG_SYS_CTRL,
836 [STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW,
837 [STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW,
838 [STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW,
839 [STMPE_IDX_GPMR_LSB] = STMPE1801_REG_GPIO_MP_LOW,
840 [STMPE_IDX_GPMR_CSB] = STMPE1801_REG_GPIO_MP_MID,
841 [STMPE_IDX_GPMR_MSB] = STMPE1801_REG_GPIO_MP_HIGH,
842 [STMPE_IDX_GPSR_LSB] = STMPE1801_REG_GPIO_SET_LOW,
843 [STMPE_IDX_GPSR_CSB] = STMPE1801_REG_GPIO_SET_MID,
844 [STMPE_IDX_GPSR_MSB] = STMPE1801_REG_GPIO_SET_HIGH,
845 [STMPE_IDX_GPCR_LSB] = STMPE1801_REG_GPIO_CLR_LOW,
846 [STMPE_IDX_GPCR_CSB] = STMPE1801_REG_GPIO_CLR_MID,
847 [STMPE_IDX_GPCR_MSB] = STMPE1801_REG_GPIO_CLR_HIGH,
848 [STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW,
849 [STMPE_IDX_GPDR_CSB] = STMPE1801_REG_GPIO_SET_DIR_MID,
850 [STMPE_IDX_GPDR_MSB] = STMPE1801_REG_GPIO_SET_DIR_HIGH,
851 [STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW,
852 [STMPE_IDX_GPRER_CSB] = STMPE1801_REG_GPIO_RE_MID,
853 [STMPE_IDX_GPRER_MSB] = STMPE1801_REG_GPIO_RE_HIGH,
854 [STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW,
855 [STMPE_IDX_GPFER_CSB] = STMPE1801_REG_GPIO_FE_MID,
856 [STMPE_IDX_GPFER_MSB] = STMPE1801_REG_GPIO_FE_HIGH,
857 [STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW,
858 [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
859 [STMPE_IDX_IEGPIOR_CSB] = STMPE1801_REG_INT_EN_GPIO_MASK_MID,
860 [STMPE_IDX_IEGPIOR_MSB] = STMPE1801_REG_INT_EN_GPIO_MASK_HIGH,
861 [STMPE_IDX_ISGPIOR_MSB] = STMPE1801_REG_INT_STA_GPIO_HIGH,
862};
863
864static struct stmpe_variant_block stmpe1801_blocks[] = {
865 {
866 .cell = &stmpe_gpio_cell,
867 .irq = STMPE1801_IRQ_GPIOC,
868 .block = STMPE_BLOCK_GPIO,
869 },
870 {
871 .cell = &stmpe_keypad_cell,
872 .irq = STMPE1801_IRQ_KEYPAD,
873 .block = STMPE_BLOCK_KEYPAD,
874 },
875};
876
877static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
878 bool enable)
879{
880 unsigned int mask = 0;
881 if (blocks & STMPE_BLOCK_GPIO)
882 mask |= STMPE1801_MSK_INT_EN_GPIO;
883
884 if (blocks & STMPE_BLOCK_KEYPAD)
885 mask |= STMPE1801_MSK_INT_EN_KPC;
886
887 return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
888 enable ? mask : 0);
889}
890
891static int stmpe_reset(struct stmpe *stmpe)
892{
893 u16 id_val = stmpe->variant->id_val;
894 unsigned long timeout;
895 int ret = 0;
896 u8 reset_bit;
897
898 if (id_val == STMPE811_ID)
899 /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */
900 reset_bit = STMPE811_SYS_CTRL_RESET;
901 else
902 /* all other STMPE variant use bit 7 of SYS_CTRL register */
903 reset_bit = STMPE_SYS_CTRL_RESET;
904
905 ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL],
906 reset_bit, reset_bit);
907 if (ret < 0)
908 return ret;
909
910 msleep(10);
911
912 timeout = jiffies + msecs_to_jiffies(100);
913 while (time_before(jiffies, timeout)) {
914 ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);
915 if (ret < 0)
916 return ret;
917 if (!(ret & reset_bit))
918 return 0;
919 usleep_range(100, 200);
920 }
921 return -EIO;
922}
923
924static struct stmpe_variant_info stmpe1801 = {
925 .name = "stmpe1801",
926 .id_val = STMPE1801_ID,
927 .id_mask = 0xfff0,
928 .num_gpios = 18,
929 .af_bits = 0,
930 .regs = stmpe1801_regs,
931 .blocks = stmpe1801_blocks,
932 .num_blocks = ARRAY_SIZE(stmpe1801_blocks),
933 .num_irqs = STMPE1801_NR_INTERNAL_IRQS,
934 .enable = stmpe1801_enable,
935 /* stmpe1801 do not have any gpio alternate function */
936 .get_altfunc = NULL,
937};
938
939/*
940 * STMPE24XX
941 */
942
943static const u8 stmpe24xx_regs[] = {
944 [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
945 [STMPE_IDX_SYS_CTRL] = STMPE24XX_REG_SYS_CTRL,
946 [STMPE_IDX_SYS_CTRL2] = STMPE24XX_REG_SYS_CTRL2,
947 [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
948 [STMPE_IDX_IER_MSB] = STMPE24XX_REG_IER_MSB,
949 [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
950 [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
951 [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
952 [STMPE_IDX_GPMR_CSB] = STMPE24XX_REG_GPMR_CSB,
953 [STMPE_IDX_GPMR_MSB] = STMPE24XX_REG_GPMR_MSB,
954 [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
955 [STMPE_IDX_GPSR_CSB] = STMPE24XX_REG_GPSR_CSB,
956 [STMPE_IDX_GPSR_MSB] = STMPE24XX_REG_GPSR_MSB,
957 [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
958 [STMPE_IDX_GPCR_CSB] = STMPE24XX_REG_GPCR_CSB,
959 [STMPE_IDX_GPCR_MSB] = STMPE24XX_REG_GPCR_MSB,
960 [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
961 [STMPE_IDX_GPDR_CSB] = STMPE24XX_REG_GPDR_CSB,
962 [STMPE_IDX_GPDR_MSB] = STMPE24XX_REG_GPDR_MSB,
963 [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
964 [STMPE_IDX_GPRER_CSB] = STMPE24XX_REG_GPRER_CSB,
965 [STMPE_IDX_GPRER_MSB] = STMPE24XX_REG_GPRER_MSB,
966 [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
967 [STMPE_IDX_GPFER_CSB] = STMPE24XX_REG_GPFER_CSB,
968 [STMPE_IDX_GPFER_MSB] = STMPE24XX_REG_GPFER_MSB,
969 [STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB,
970 [STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB,
971 [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
972 [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
973 [STMPE_IDX_IEGPIOR_CSB] = STMPE24XX_REG_IEGPIOR_CSB,
974 [STMPE_IDX_IEGPIOR_MSB] = STMPE24XX_REG_IEGPIOR_MSB,
975 [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
976 [STMPE_IDX_GPEDR_LSB] = STMPE24XX_REG_GPEDR_LSB,
977 [STMPE_IDX_GPEDR_CSB] = STMPE24XX_REG_GPEDR_CSB,
978 [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
979};
980
981static struct stmpe_variant_block stmpe24xx_blocks[] = {
982 {
983 .cell = &stmpe_gpio_cell,
984 .irq = STMPE24XX_IRQ_GPIOC,
985 .block = STMPE_BLOCK_GPIO,
986 },
987 {
988 .cell = &stmpe_keypad_cell,
989 .irq = STMPE24XX_IRQ_KEYPAD,
990 .block = STMPE_BLOCK_KEYPAD,
991 },
992 {
993 .cell = &stmpe_pwm_cell,
994 .irq = STMPE24XX_IRQ_PWM0,
995 .block = STMPE_BLOCK_PWM,
996 },
997};
998
999static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
1000 bool enable)
1001{
1002 unsigned int mask = 0;
1003
1004 if (blocks & STMPE_BLOCK_GPIO)
1005 mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
1006
1007 if (blocks & STMPE_BLOCK_KEYPAD)
1008 mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
1009
1010 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
1011 enable ? mask : 0);
1012}
1013
1014static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
1015{
1016 switch (block) {
1017 case STMPE_BLOCK_ROTATOR:
1018 return 2;
1019
1020 case STMPE_BLOCK_KEYPAD:
1021 case STMPE_BLOCK_PWM:
1022 return 1;
1023
1024 case STMPE_BLOCK_GPIO:
1025 default:
1026 return 0;
1027 }
1028}
1029
1030static struct stmpe_variant_info stmpe2401 = {
1031 .name = "stmpe2401",
1032 .id_val = 0x0101,
1033 .id_mask = 0xffff,
1034 .num_gpios = 24,
1035 .af_bits = 2,
1036 .regs = stmpe24xx_regs,
1037 .blocks = stmpe24xx_blocks,
1038 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
1039 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
1040 .enable = stmpe24xx_enable,
1041 .get_altfunc = stmpe24xx_get_altfunc,
1042};
1043
1044static struct stmpe_variant_info stmpe2403 = {
1045 .name = "stmpe2403",
1046 .id_val = 0x0120,
1047 .id_mask = 0xffff,
1048 .num_gpios = 24,
1049 .af_bits = 2,
1050 .regs = stmpe24xx_regs,
1051 .blocks = stmpe24xx_blocks,
1052 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
1053 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
1054 .enable = stmpe24xx_enable,
1055 .get_altfunc = stmpe24xx_get_altfunc,
1056 .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
1057};
1058
1059static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
1060 [STMPE610] = &stmpe610,
1061 [STMPE801] = &stmpe801,
1062 [STMPE811] = &stmpe811,
1063 [STMPE1600] = &stmpe1600,
1064 [STMPE1601] = &stmpe1601,
1065 [STMPE1801] = &stmpe1801,
1066 [STMPE2401] = &stmpe2401,
1067 [STMPE2403] = &stmpe2403,
1068};
1069
1070/*
1071 * These devices can be connected in a 'no-irq' configuration - the irq pin
1072 * is not used and the device cannot interrupt the CPU. Here we only list
1073 * devices which support this configuration - the driver will fail probing
1074 * for any devices not listed here which are configured in this way.
1075 */
1076static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
1077 [STMPE801] = &stmpe801_noirq,
1078};
1079
1080static irqreturn_t stmpe_irq(int irq, void *data)
1081{
1082 struct stmpe *stmpe = data;
1083 struct stmpe_variant_info *variant = stmpe->variant;
1084 int num = DIV_ROUND_UP(variant->num_irqs, 8);
1085 u8 israddr;
1086 u8 isr[3];
1087 int ret;
1088 int i;
1089
1090 if (variant->id_val == STMPE801_ID ||
1091 variant->id_val == STMPE1600_ID) {
1092 int base = irq_find_mapping(stmpe->domain, 0);
1093
1094 handle_nested_irq(base);
1095 return IRQ_HANDLED;
1096 }
1097
1098 if (variant->id_val == STMPE1801_ID)
1099 israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
1100 else
1101 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
1102
1103 ret = stmpe_block_read(stmpe, israddr, num, isr);
1104 if (ret < 0)
1105 return IRQ_NONE;
1106
1107 for (i = 0; i < num; i++) {
1108 int bank = num - i - 1;
1109 u8 status = isr[i];
1110 u8 clear;
1111
1112 status &= stmpe->ier[bank];
1113 if (!status)
1114 continue;
1115
1116 clear = status;
1117 while (status) {
1118 int bit = __ffs(status);
1119 int line = bank * 8 + bit;
1120 int nestedirq = irq_find_mapping(stmpe->domain, line);
1121
1122 handle_nested_irq(nestedirq);
1123 status &= ~(1 << bit);
1124 }
1125
1126 stmpe_reg_write(stmpe, israddr + i, clear);
1127 }
1128
1129 return IRQ_HANDLED;
1130}
1131
1132static void stmpe_irq_lock(struct irq_data *data)
1133{
1134 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1135
1136 mutex_lock(&stmpe->irq_lock);
1137}
1138
1139static void stmpe_irq_sync_unlock(struct irq_data *data)
1140{
1141 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1142 struct stmpe_variant_info *variant = stmpe->variant;
1143 int num = DIV_ROUND_UP(variant->num_irqs, 8);
1144 int i;
1145
1146 for (i = 0; i < num; i++) {
1147 u8 new = stmpe->ier[i];
1148 u8 old = stmpe->oldier[i];
1149
1150 if (new == old)
1151 continue;
1152
1153 stmpe->oldier[i] = new;
1154 stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB + i], new);
1155 }
1156
1157 mutex_unlock(&stmpe->irq_lock);
1158}
1159
1160static void stmpe_irq_mask(struct irq_data *data)
1161{
1162 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1163 int offset = data->hwirq;
1164 int regoffset = offset / 8;
1165 int mask = 1 << (offset % 8);
1166
1167 stmpe->ier[regoffset] &= ~mask;
1168}
1169
1170static void stmpe_irq_unmask(struct irq_data *data)
1171{
1172 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1173 int offset = data->hwirq;
1174 int regoffset = offset / 8;
1175 int mask = 1 << (offset % 8);
1176
1177 stmpe->ier[regoffset] |= mask;
1178}
1179
1180static struct irq_chip stmpe_irq_chip = {
1181 .name = "stmpe",
1182 .irq_bus_lock = stmpe_irq_lock,
1183 .irq_bus_sync_unlock = stmpe_irq_sync_unlock,
1184 .irq_mask = stmpe_irq_mask,
1185 .irq_unmask = stmpe_irq_unmask,
1186};
1187
1188static int stmpe_irq_map(struct irq_domain *d, unsigned int virq,
1189 irq_hw_number_t hwirq)
1190{
1191 struct stmpe *stmpe = d->host_data;
1192 struct irq_chip *chip = NULL;
1193
1194 if (stmpe->variant->id_val != STMPE801_ID)
1195 chip = &stmpe_irq_chip;
1196
1197 irq_set_chip_data(virq, stmpe);
1198 irq_set_chip_and_handler(virq, chip, handle_edge_irq);
1199 irq_set_nested_thread(virq, 1);
1200 irq_set_noprobe(virq);
1201
1202 return 0;
1203}
1204
1205static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq)
1206{
1207 irq_set_chip_and_handler(virq, NULL, NULL);
1208 irq_set_chip_data(virq, NULL);
1209}
1210
1211static const struct irq_domain_ops stmpe_irq_ops = {
1212 .map = stmpe_irq_map,
1213 .unmap = stmpe_irq_unmap,
1214 .xlate = irq_domain_xlate_twocell,
1215};
1216
1217static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
1218{
1219 int base = 0;
1220 int num_irqs = stmpe->variant->num_irqs;
1221
1222 stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
1223 &stmpe_irq_ops, stmpe);
1224 if (!stmpe->domain) {
1225 dev_err(stmpe->dev, "Failed to create irqdomain\n");
1226 return -ENOSYS;
1227 }
1228
1229 return 0;
1230}
1231
1232static int stmpe_chip_init(struct stmpe *stmpe)
1233{
1234 unsigned int irq_trigger = stmpe->pdata->irq_trigger;
1235 int autosleep_timeout = stmpe->pdata->autosleep_timeout;
1236 struct stmpe_variant_info *variant = stmpe->variant;
1237 u8 icr = 0;
1238 unsigned int id;
1239 u8 data[2];
1240 int ret;
1241
1242 ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
1243 ARRAY_SIZE(data), data);
1244 if (ret < 0)
1245 return ret;
1246
1247 id = (data[0] << 8) | data[1];
1248 if ((id & variant->id_mask) != variant->id_val) {
1249 dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
1250 return -EINVAL;
1251 }
1252
1253 dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
1254
1255 /* Disable all modules -- subdrivers should enable what they need. */
1256 ret = stmpe_disable(stmpe, ~0);
1257 if (ret)
1258 return ret;
1259
1260 ret = stmpe_reset(stmpe);
1261 if (ret < 0)
1262 return ret;
1263
1264 if (stmpe->irq >= 0) {
1265 if (id == STMPE801_ID || id == STMPE1600_ID)
1266 icr = STMPE_SYS_CTRL_INT_EN;
1267 else
1268 icr = STMPE_ICR_LSB_GIM;
1269
1270 /* STMPE801 and STMPE1600 don't support Edge interrupts */
1271 if (id != STMPE801_ID && id != STMPE1600_ID) {
1272 if (irq_trigger == IRQF_TRIGGER_FALLING ||
1273 irq_trigger == IRQF_TRIGGER_RISING)
1274 icr |= STMPE_ICR_LSB_EDGE;
1275 }
1276
1277 if (irq_trigger == IRQF_TRIGGER_RISING ||
1278 irq_trigger == IRQF_TRIGGER_HIGH) {
1279 if (id == STMPE801_ID || id == STMPE1600_ID)
1280 icr |= STMPE_SYS_CTRL_INT_HI;
1281 else
1282 icr |= STMPE_ICR_LSB_HIGH;
1283 }
1284 }
1285
1286 if (stmpe->pdata->autosleep) {
1287 ret = stmpe_autosleep(stmpe, autosleep_timeout);
1288 if (ret)
1289 return ret;
1290 }
1291
1292 return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
1293}
1294
1295static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
1296{
1297 return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
1298 NULL, 0, stmpe->domain);
1299}
1300
1301static int stmpe_devices_init(struct stmpe *stmpe)
1302{
1303 struct stmpe_variant_info *variant = stmpe->variant;
1304 unsigned int platform_blocks = stmpe->pdata->blocks;
1305 int ret = -EINVAL;
1306 int i, j;
1307
1308 for (i = 0; i < variant->num_blocks; i++) {
1309 struct stmpe_variant_block *block = &variant->blocks[i];
1310
1311 if (!(platform_blocks & block->block))
1312 continue;
1313
1314 for (j = 0; j < block->cell->num_resources; j++) {
1315 struct resource *res =
1316 (struct resource *) &block->cell->resources[j];
1317
1318 /* Dynamically fill in a variant's IRQ. */
1319 if (res->flags & IORESOURCE_IRQ)
1320 res->start = res->end = block->irq + j;
1321 }
1322
1323 platform_blocks &= ~block->block;
1324 ret = stmpe_add_device(stmpe, block->cell);
1325 if (ret)
1326 return ret;
1327 }
1328
1329 if (platform_blocks)
1330 dev_warn(stmpe->dev,
1331 "platform wants blocks (%#x) not present on variant",
1332 platform_blocks);
1333
1334 return ret;
1335}
1336
1337static void stmpe_of_probe(struct stmpe_platform_data *pdata,
1338 struct device_node *np)
1339{
1340 struct device_node *child;
1341
1342 pdata->id = of_alias_get_id(np, "stmpe-i2c");
1343 if (pdata->id < 0)
1344 pdata->id = -1;
1345
1346 of_property_read_u32(np, "st,autosleep-timeout",
1347 &pdata->autosleep_timeout);
1348
1349 pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
1350
1351 for_each_available_child_of_node(np, child) {
1352 if (of_device_is_compatible(child, stmpe_gpio_cell.of_compatible))
1353 pdata->blocks |= STMPE_BLOCK_GPIO;
1354 else if (of_device_is_compatible(child, stmpe_keypad_cell.of_compatible))
1355 pdata->blocks |= STMPE_BLOCK_KEYPAD;
1356 else if (of_device_is_compatible(child, stmpe_ts_cell.of_compatible))
1357 pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
1358 else if (of_device_is_compatible(child, stmpe_adc_cell.of_compatible))
1359 pdata->blocks |= STMPE_BLOCK_ADC;
1360 else if (of_device_is_compatible(child, stmpe_pwm_cell.of_compatible))
1361 pdata->blocks |= STMPE_BLOCK_PWM;
1362 }
1363}
1364
1365/* Called from client specific probe routines */
1366int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
1367{
1368 struct stmpe_platform_data *pdata;
1369 struct device_node *np = ci->dev->of_node;
1370 struct stmpe *stmpe;
1371 struct gpio_desc *irq_gpio;
1372 int ret;
1373 u32 val;
1374
1375 pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
1376 if (!pdata)
1377 return -ENOMEM;
1378
1379 stmpe_of_probe(pdata, np);
1380
1381 if (!of_property_present(np, "interrupts"))
1382 ci->irq = -1;
1383
1384 stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
1385 if (!stmpe)
1386 return -ENOMEM;
1387
1388 mutex_init(&stmpe->irq_lock);
1389 mutex_init(&stmpe->lock);
1390
1391 if (!of_property_read_u32(np, "st,sample-time", &val))
1392 stmpe->sample_time = val;
1393 if (!of_property_read_u32(np, "st,mod-12b", &val))
1394 stmpe->mod_12b = val;
1395 if (!of_property_read_u32(np, "st,ref-sel", &val))
1396 stmpe->ref_sel = val;
1397 if (!of_property_read_u32(np, "st,adc-freq", &val))
1398 stmpe->adc_freq = val;
1399
1400 stmpe->dev = ci->dev;
1401 stmpe->client = ci->client;
1402 stmpe->pdata = pdata;
1403 stmpe->ci = ci;
1404 stmpe->partnum = partnum;
1405 stmpe->variant = stmpe_variant_info[partnum];
1406 stmpe->regs = stmpe->variant->regs;
1407 stmpe->num_gpios = stmpe->variant->num_gpios;
1408 stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
1409 if (!IS_ERR(stmpe->vcc)) {
1410 ret = regulator_enable(stmpe->vcc);
1411 if (ret)
1412 dev_warn(ci->dev, "failed to enable VCC supply\n");
1413 }
1414 stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
1415 if (!IS_ERR(stmpe->vio)) {
1416 ret = regulator_enable(stmpe->vio);
1417 if (ret)
1418 dev_warn(ci->dev, "failed to enable VIO supply\n");
1419 }
1420 dev_set_drvdata(stmpe->dev, stmpe);
1421
1422 if (ci->init)
1423 ci->init(stmpe);
1424
1425 irq_gpio = devm_gpiod_get_optional(ci->dev, "irq", GPIOD_ASIS);
1426 ret = PTR_ERR_OR_ZERO(irq_gpio);
1427 if (ret) {
1428 dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n", ret);
1429 return ret;
1430 }
1431
1432 if (irq_gpio) {
1433 stmpe->irq = gpiod_to_irq(irq_gpio);
1434 pdata->irq_trigger = gpiod_is_active_low(irq_gpio) ?
1435 IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
1436 } else {
1437 stmpe->irq = ci->irq;
1438 pdata->irq_trigger = IRQF_TRIGGER_NONE;
1439 }
1440
1441 if (stmpe->irq < 0) {
1442 /* use alternate variant info for no-irq mode, if supported */
1443 dev_info(stmpe->dev,
1444 "%s configured in no-irq mode by platform data\n",
1445 stmpe->variant->name);
1446 if (!stmpe_noirq_variant_info[stmpe->partnum]) {
1447 dev_err(stmpe->dev,
1448 "%s does not support no-irq mode!\n",
1449 stmpe->variant->name);
1450 return -ENODEV;
1451 }
1452 stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
1453 } else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) {
1454 pdata->irq_trigger = irq_get_trigger_type(stmpe->irq);
1455 }
1456
1457 ret = stmpe_chip_init(stmpe);
1458 if (ret)
1459 return ret;
1460
1461 if (stmpe->irq >= 0) {
1462 ret = stmpe_irq_init(stmpe, np);
1463 if (ret)
1464 return ret;
1465
1466 ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL,
1467 stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT,
1468 "stmpe", stmpe);
1469 if (ret) {
1470 dev_err(stmpe->dev, "failed to request IRQ: %d\n",
1471 ret);
1472 return ret;
1473 }
1474 }
1475
1476 ret = stmpe_devices_init(stmpe);
1477 if (!ret)
1478 return 0;
1479
1480 dev_err(stmpe->dev, "failed to add children\n");
1481 mfd_remove_devices(stmpe->dev);
1482
1483 return ret;
1484}
1485
1486void stmpe_remove(struct stmpe *stmpe)
1487{
1488 if (!IS_ERR(stmpe->vio) && regulator_is_enabled(stmpe->vio))
1489 regulator_disable(stmpe->vio);
1490 if (!IS_ERR(stmpe->vcc) && regulator_is_enabled(stmpe->vcc))
1491 regulator_disable(stmpe->vcc);
1492
1493 __stmpe_disable(stmpe, STMPE_BLOCK_ADC);
1494
1495 mfd_remove_devices(stmpe->dev);
1496}
1497
1498static int stmpe_suspend(struct device *dev)
1499{
1500 struct stmpe *stmpe = dev_get_drvdata(dev);
1501
1502 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1503 enable_irq_wake(stmpe->irq);
1504
1505 return 0;
1506}
1507
1508static int stmpe_resume(struct device *dev)
1509{
1510 struct stmpe *stmpe = dev_get_drvdata(dev);
1511
1512 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1513 disable_irq_wake(stmpe->irq);
1514
1515 return 0;
1516}
1517
1518EXPORT_GPL_SIMPLE_DEV_PM_OPS(stmpe_dev_pm_ops,
1519 stmpe_suspend, stmpe_resume);