Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * Copyright (C) 2003-2008 Takahiro Hirofuchi
   4 * Copyright (C) 2015-2016 Nobuo Iwata
   5 */
   6
   7#include <linux/init.h>
   8#include <linux/file.h>
   9#include <linux/kernel.h>
  10#include <linux/kthread.h>
  11#include <linux/module.h>
  12#include <linux/platform_device.h>
  13#include <linux/slab.h>
  14
  15#include "usbip_common.h"
  16#include "vhci.h"
  17
  18#define DRIVER_AUTHOR "Takahiro Hirofuchi"
  19#define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver"
  20
  21/*
  22 * TODO
  23 *	- update root hub emulation
  24 *	- move the emulation code to userland ?
  25 *		porting to other operating systems
  26 *		minimize kernel code
  27 *	- add suspend/resume code
  28 *	- clean up everything
  29 */
  30
  31/* See usb gadget dummy hcd */
  32
  33static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
  34static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
  35			    u16 wIndex, char *buff, u16 wLength);
  36static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
  37			    gfp_t mem_flags);
  38static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
  39static int vhci_start(struct usb_hcd *vhci_hcd);
  40static void vhci_stop(struct usb_hcd *hcd);
  41static int vhci_get_frame_number(struct usb_hcd *hcd);
  42
  43static const char driver_name[] = "vhci_hcd";
  44static const char driver_desc[] = "USB/IP Virtual Host Controller";
  45
  46int vhci_num_controllers = VHCI_NR_HCS;
  47struct vhci *vhcis;
  48
  49static const char * const bit_desc[] = {
  50	"CONNECTION",		/*0*/
  51	"ENABLE",		/*1*/
  52	"SUSPEND",		/*2*/
  53	"OVER_CURRENT",		/*3*/
  54	"RESET",		/*4*/
  55	"L1",			/*5*/
  56	"R6",			/*6*/
  57	"R7",			/*7*/
  58	"POWER",		/*8*/
  59	"LOWSPEED",		/*9*/
  60	"HIGHSPEED",		/*10*/
  61	"PORT_TEST",		/*11*/
  62	"INDICATOR",		/*12*/
  63	"R13",			/*13*/
  64	"R14",			/*14*/
  65	"R15",			/*15*/
  66	"C_CONNECTION",		/*16*/
  67	"C_ENABLE",		/*17*/
  68	"C_SUSPEND",		/*18*/
  69	"C_OVER_CURRENT",	/*19*/
  70	"C_RESET",		/*20*/
  71	"C_L1",			/*21*/
  72	"R22",			/*22*/
  73	"R23",			/*23*/
  74	"R24",			/*24*/
  75	"R25",			/*25*/
  76	"R26",			/*26*/
  77	"R27",			/*27*/
  78	"R28",			/*28*/
  79	"R29",			/*29*/
  80	"R30",			/*30*/
  81	"R31",			/*31*/
  82};
  83
  84static const char * const bit_desc_ss[] = {
  85	"CONNECTION",		/*0*/
  86	"ENABLE",		/*1*/
  87	"SUSPEND",		/*2*/
  88	"OVER_CURRENT",		/*3*/
  89	"RESET",		/*4*/
  90	"L1",			/*5*/
  91	"R6",			/*6*/
  92	"R7",			/*7*/
  93	"R8",			/*8*/
  94	"POWER",		/*9*/
  95	"HIGHSPEED",		/*10*/
  96	"PORT_TEST",		/*11*/
  97	"INDICATOR",		/*12*/
  98	"R13",			/*13*/
  99	"R14",			/*14*/
 100	"R15",			/*15*/
 101	"C_CONNECTION",		/*16*/
 102	"C_ENABLE",		/*17*/
 103	"C_SUSPEND",		/*18*/
 104	"C_OVER_CURRENT",	/*19*/
 105	"C_RESET",		/*20*/
 106	"C_BH_RESET",		/*21*/
 107	"C_LINK_STATE",		/*22*/
 108	"C_CONFIG_ERROR",	/*23*/
 109	"R24",			/*24*/
 110	"R25",			/*25*/
 111	"R26",			/*26*/
 112	"R27",			/*27*/
 113	"R28",			/*28*/
 114	"R29",			/*29*/
 115	"R30",			/*30*/
 116	"R31",			/*31*/
 117};
 118
 119static void dump_port_status_diff(u32 prev_status, u32 new_status, bool usb3)
 120{
 121	int i = 0;
 122	u32 bit = 1;
 123	const char * const *desc = bit_desc;
 124
 125	if (usb3)
 126		desc = bit_desc_ss;
 127
 128	pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status);
 129	while (bit) {
 130		u32 prev = prev_status & bit;
 131		u32 new = new_status & bit;
 132		char change;
 133
 134		if (!prev && new)
 135			change = '+';
 136		else if (prev && !new)
 137			change = '-';
 138		else
 139			change = ' ';
 140
 141		if (prev || new) {
 142			pr_debug(" %c%s\n", change, desc[i]);
 143
 144			if (bit == 1) /* USB_PORT_STAT_CONNECTION */
 145				pr_debug(" %c%s\n", change, "USB_PORT_STAT_SPEED_5GBPS");
 146		}
 147		bit <<= 1;
 148		i++;
 149	}
 150	pr_debug("\n");
 151}
 152
 153void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed)
 154{
 155	struct vhci_hcd	*vhci_hcd = vdev_to_vhci_hcd(vdev);
 156	struct vhci *vhci = vhci_hcd->vhci;
 157	int		rhport = vdev->rhport;
 158	u32		status;
 159	unsigned long	flags;
 160
 161	usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport);
 162
 163	spin_lock_irqsave(&vhci->lock, flags);
 164
 165	status = vhci_hcd->port_status[rhport];
 166
 167	status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION);
 168
 169	switch (speed) {
 170	case USB_SPEED_HIGH:
 171		status |= USB_PORT_STAT_HIGH_SPEED;
 172		break;
 173	case USB_SPEED_LOW:
 174		status |= USB_PORT_STAT_LOW_SPEED;
 175		break;
 176	default:
 177		break;
 178	}
 179
 180	vhci_hcd->port_status[rhport] = status;
 181
 182	spin_unlock_irqrestore(&vhci->lock, flags);
 183
 184	usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
 185}
 186
 187static void rh_port_disconnect(struct vhci_device *vdev)
 188{
 189	struct vhci_hcd	*vhci_hcd = vdev_to_vhci_hcd(vdev);
 190	struct vhci *vhci = vhci_hcd->vhci;
 191	int		rhport = vdev->rhport;
 192	u32		status;
 193	unsigned long	flags;
 194
 195	usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
 196
 197	spin_lock_irqsave(&vhci->lock, flags);
 198
 199	status = vhci_hcd->port_status[rhport];
 200
 201	status &= ~USB_PORT_STAT_CONNECTION;
 202	status |= (1 << USB_PORT_FEAT_C_CONNECTION);
 203
 204	vhci_hcd->port_status[rhport] = status;
 205
 206	spin_unlock_irqrestore(&vhci->lock, flags);
 207	usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
 208}
 209
 210#define PORT_C_MASK				\
 211	((USB_PORT_STAT_C_CONNECTION		\
 212	  | USB_PORT_STAT_C_ENABLE		\
 213	  | USB_PORT_STAT_C_SUSPEND		\
 214	  | USB_PORT_STAT_C_OVERCURRENT		\
 215	  | USB_PORT_STAT_C_RESET) << 16)
 216
 217/*
 218 * Returns 0 if the status hasn't changed, or the number of bytes in buf.
 219 * Ports are 0-indexed from the HCD point of view,
 220 * and 1-indexed from the USB core pointer of view.
 221 *
 222 * @buf: a bitmap to show which port status has been changed.
 223 *  bit  0: reserved
 224 *  bit  1: the status of port 0 has been changed.
 225 *  bit  2: the status of port 1 has been changed.
 226 *  ...
 227 */
 228static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
 229{
 230	struct vhci_hcd	*vhci_hcd = hcd_to_vhci_hcd(hcd);
 231	struct vhci *vhci = vhci_hcd->vhci;
 232	int		retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8);
 233	int		rhport;
 234	int		changed = 0;
 235	unsigned long	flags;
 236
 237	memset(buf, 0, retval);
 238
 239	spin_lock_irqsave(&vhci->lock, flags);
 240	if (!HCD_HW_ACCESSIBLE(hcd)) {
 241		usbip_dbg_vhci_rh("hw accessible flag not on?\n");
 242		goto done;
 243	}
 244
 245	/* check pseudo status register for each port */
 246	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
 247		if ((vhci_hcd->port_status[rhport] & PORT_C_MASK)) {
 248			/* The status of a port has been changed, */
 249			usbip_dbg_vhci_rh("port %d status changed\n", rhport);
 250
 251			buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8;
 252			changed = 1;
 253		}
 254	}
 255
 256	if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1))
 257		usb_hcd_resume_root_hub(hcd);
 258
 259done:
 260	spin_unlock_irqrestore(&vhci->lock, flags);
 261	return changed ? retval : 0;
 262}
 263
 264/* usb 3.0 root hub device descriptor */
 265static struct {
 266	struct usb_bos_descriptor bos;
 267	struct usb_ss_cap_descriptor ss_cap;
 268} __packed usb3_bos_desc = {
 269
 270	.bos = {
 271		.bLength		= USB_DT_BOS_SIZE,
 272		.bDescriptorType	= USB_DT_BOS,
 273		.wTotalLength		= cpu_to_le16(sizeof(usb3_bos_desc)),
 274		.bNumDeviceCaps		= 1,
 275	},
 276	.ss_cap = {
 277		.bLength		= USB_DT_USB_SS_CAP_SIZE,
 278		.bDescriptorType	= USB_DT_DEVICE_CAPABILITY,
 279		.bDevCapabilityType	= USB_SS_CAP_TYPE,
 280		.wSpeedSupported	= cpu_to_le16(USB_5GBPS_OPERATION),
 281		.bFunctionalitySupport	= ilog2(USB_5GBPS_OPERATION),
 282	},
 283};
 284
 285static inline void
 286ss_hub_descriptor(struct usb_hub_descriptor *desc)
 287{
 288	memset(desc, 0, sizeof *desc);
 289	desc->bDescriptorType = USB_DT_SS_HUB;
 290	desc->bDescLength = 12;
 291	desc->wHubCharacteristics = cpu_to_le16(
 292		HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
 293	desc->bNbrPorts = VHCI_HC_PORTS;
 294	desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
 295	desc->u.ss.DeviceRemovable = 0xffff;
 296}
 297
 298static inline void hub_descriptor(struct usb_hub_descriptor *desc)
 299{
 300	int width;
 301
 302	memset(desc, 0, sizeof(*desc));
 303	desc->bDescriptorType = USB_DT_HUB;
 304	desc->wHubCharacteristics = cpu_to_le16(
 305		HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
 306
 307	desc->bNbrPorts = VHCI_HC_PORTS;
 308	BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN);
 309	width = desc->bNbrPorts / 8 + 1;
 310	desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width;
 311	memset(&desc->u.hs.DeviceRemovable[0], 0, width);
 312	memset(&desc->u.hs.DeviceRemovable[width], 0xff, width);
 313}
 314
 315static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 316			    u16 wIndex, char *buf, u16 wLength)
 317{
 318	struct vhci_hcd	*vhci_hcd;
 319	struct vhci	*vhci;
 320	int             retval = 0;
 321	int		rhport = -1;
 322	unsigned long	flags;
 323	bool invalid_rhport = false;
 324
 325	u32 prev_port_status[VHCI_HC_PORTS];
 326
 327	if (!HCD_HW_ACCESSIBLE(hcd))
 328		return -ETIMEDOUT;
 329
 330	/*
 331	 * NOTE:
 332	 * wIndex (bits 0-7) shows the port number and begins from 1?
 333	 */
 334	wIndex = ((__u8)(wIndex & 0x00ff));
 335	usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
 336			  wIndex);
 337
 338	/*
 339	 * wIndex can be 0 for some request types (typeReq). rhport is
 340	 * in valid range when wIndex >= 1 and < VHCI_HC_PORTS.
 341	 *
 342	 * Reference port_status[] only with valid rhport when
 343	 * invalid_rhport is false.
 344	 */
 345	if (wIndex < 1 || wIndex > VHCI_HC_PORTS) {
 346		invalid_rhport = true;
 347		if (wIndex > VHCI_HC_PORTS)
 348			pr_err("invalid port number %d\n", wIndex);
 349	} else
 350		rhport = wIndex - 1;
 351
 352	vhci_hcd = hcd_to_vhci_hcd(hcd);
 353	vhci = vhci_hcd->vhci;
 354
 355	spin_lock_irqsave(&vhci->lock, flags);
 356
 357	/* store old status and compare now and old later */
 358	if (usbip_dbg_flag_vhci_rh) {
 359		if (!invalid_rhport)
 360			memcpy(prev_port_status, vhci_hcd->port_status,
 361				sizeof(prev_port_status));
 362	}
 363
 364	switch (typeReq) {
 365	case ClearHubFeature:
 366		usbip_dbg_vhci_rh(" ClearHubFeature\n");
 367		break;
 368	case ClearPortFeature:
 369		if (invalid_rhport) {
 370			pr_err("invalid port number %d\n", wIndex);
 371			goto error;
 372		}
 373		switch (wValue) {
 374		case USB_PORT_FEAT_SUSPEND:
 375			if (hcd->speed == HCD_USB3) {
 376				pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not "
 377				       "supported for USB 3.0 roothub\n");
 378				goto error;
 379			}
 380			usbip_dbg_vhci_rh(
 381				" ClearPortFeature: USB_PORT_FEAT_SUSPEND\n");
 382			if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
 383				/* 20msec signaling */
 384				vhci_hcd->resuming = 1;
 385				vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
 386			}
 387			break;
 388		case USB_PORT_FEAT_POWER:
 389			usbip_dbg_vhci_rh(
 390				" ClearPortFeature: USB_PORT_FEAT_POWER\n");
 391			if (hcd->speed == HCD_USB3)
 392				vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER;
 393			else
 394				vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER;
 395			break;
 396		default:
 397			usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
 398					  wValue);
 399			if (wValue >= 32)
 400				goto error;
 401			vhci_hcd->port_status[rhport] &= ~(1 << wValue);
 402			break;
 403		}
 404		break;
 405	case GetHubDescriptor:
 406		usbip_dbg_vhci_rh(" GetHubDescriptor\n");
 407		if (hcd->speed == HCD_USB3 &&
 408				(wLength < USB_DT_SS_HUB_SIZE ||
 409				 wValue != (USB_DT_SS_HUB << 8))) {
 410			pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n");
 411			goto error;
 412		}
 413		if (hcd->speed == HCD_USB3)
 414			ss_hub_descriptor((struct usb_hub_descriptor *) buf);
 415		else
 416			hub_descriptor((struct usb_hub_descriptor *) buf);
 417		break;
 418	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 419		if (hcd->speed != HCD_USB3)
 420			goto error;
 421
 422		if ((wValue >> 8) != USB_DT_BOS)
 423			goto error;
 424
 425		memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
 426		retval = sizeof(usb3_bos_desc);
 427		break;
 428	case GetHubStatus:
 429		usbip_dbg_vhci_rh(" GetHubStatus\n");
 430		*(__le32 *) buf = cpu_to_le32(0);
 431		break;
 432	case GetPortStatus:
 433		usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
 434		if (invalid_rhport) {
 435			pr_err("invalid port number %d\n", wIndex);
 436			retval = -EPIPE;
 437			goto error;
 438		}
 439
 440		/* we do not care about resume. */
 441
 442		/* whoever resets or resumes must GetPortStatus to
 443		 * complete it!!
 444		 */
 445		if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) {
 446			vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND);
 447			vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND);
 448			vhci_hcd->resuming = 0;
 449			vhci_hcd->re_timeout = 0;
 450		}
 451
 452		if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
 453		    0 && time_after(jiffies, vhci_hcd->re_timeout)) {
 454			vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET);
 455			vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET);
 456			vhci_hcd->re_timeout = 0;
 457
 458			/*
 459			 * A few drivers do usb reset during probe when
 460			 * the device could be in VDEV_ST_USED state
 461			 */
 462			if (vhci_hcd->vdev[rhport].ud.status ==
 463				VDEV_ST_NOTASSIGNED ||
 464			    vhci_hcd->vdev[rhport].ud.status ==
 465				VDEV_ST_USED) {
 466				usbip_dbg_vhci_rh(
 467					" enable rhport %d (status %u)\n",
 468					rhport,
 469					vhci_hcd->vdev[rhport].ud.status);
 470				vhci_hcd->port_status[rhport] |=
 471					USB_PORT_STAT_ENABLE;
 472			}
 473
 474			if (hcd->speed < HCD_USB3) {
 475				switch (vhci_hcd->vdev[rhport].speed) {
 476				case USB_SPEED_HIGH:
 477					vhci_hcd->port_status[rhport] |=
 478					      USB_PORT_STAT_HIGH_SPEED;
 479					break;
 480				case USB_SPEED_LOW:
 481					vhci_hcd->port_status[rhport] |=
 482						USB_PORT_STAT_LOW_SPEED;
 483					break;
 484				default:
 485					pr_err("vhci_device speed not set\n");
 486					break;
 487				}
 488			}
 489		}
 490		((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]);
 491		((__le16 *) buf)[1] =
 492			cpu_to_le16(vhci_hcd->port_status[rhport] >> 16);
 493
 494		usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
 495				  ((u16 *)buf)[1]);
 496		break;
 497	case SetHubFeature:
 498		usbip_dbg_vhci_rh(" SetHubFeature\n");
 499		retval = -EPIPE;
 500		break;
 501	case SetPortFeature:
 502		switch (wValue) {
 503		case USB_PORT_FEAT_LINK_STATE:
 504			usbip_dbg_vhci_rh(
 505				" SetPortFeature: USB_PORT_FEAT_LINK_STATE\n");
 506			if (hcd->speed != HCD_USB3) {
 507				pr_err("USB_PORT_FEAT_LINK_STATE req not "
 508				       "supported for USB 2.0 roothub\n");
 509				goto error;
 510			}
 511			/*
 512			 * Since this is dummy we don't have an actual link so
 513			 * there is nothing to do for the SET_LINK_STATE cmd
 514			 */
 515			break;
 516		case USB_PORT_FEAT_U1_TIMEOUT:
 517			usbip_dbg_vhci_rh(
 518				" SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n");
 519			fallthrough;
 520		case USB_PORT_FEAT_U2_TIMEOUT:
 521			usbip_dbg_vhci_rh(
 522				" SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n");
 523			/* TODO: add suspend/resume support! */
 524			if (hcd->speed != HCD_USB3) {
 525				pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not "
 526				       "supported for USB 2.0 roothub\n");
 527				goto error;
 528			}
 529			break;
 530		case USB_PORT_FEAT_SUSPEND:
 531			usbip_dbg_vhci_rh(
 532				" SetPortFeature: USB_PORT_FEAT_SUSPEND\n");
 533			/* Applicable only for USB2.0 hub */
 534			if (hcd->speed == HCD_USB3) {
 535				pr_err("USB_PORT_FEAT_SUSPEND req not "
 536				       "supported for USB 3.0 roothub\n");
 537				goto error;
 538			}
 539
 540			if (invalid_rhport) {
 541				pr_err("invalid port number %d\n", wIndex);
 542				goto error;
 543			}
 544
 545			vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND;
 546			break;
 547		case USB_PORT_FEAT_POWER:
 548			usbip_dbg_vhci_rh(
 549				" SetPortFeature: USB_PORT_FEAT_POWER\n");
 550			if (invalid_rhport) {
 551				pr_err("invalid port number %d\n", wIndex);
 552				goto error;
 553			}
 554			if (hcd->speed == HCD_USB3)
 555				vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
 556			else
 557				vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER;
 558			break;
 559		case USB_PORT_FEAT_BH_PORT_RESET:
 560			usbip_dbg_vhci_rh(
 561				" SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n");
 562			if (invalid_rhport) {
 563				pr_err("invalid port number %d\n", wIndex);
 564				goto error;
 565			}
 566			/* Applicable only for USB3.0 hub */
 567			if (hcd->speed != HCD_USB3) {
 568				pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
 569				       "supported for USB 2.0 roothub\n");
 570				goto error;
 571			}
 572			fallthrough;
 573		case USB_PORT_FEAT_RESET:
 574			usbip_dbg_vhci_rh(
 575				" SetPortFeature: USB_PORT_FEAT_RESET\n");
 576			if (invalid_rhport) {
 577				pr_err("invalid port number %d\n", wIndex);
 578				goto error;
 579			}
 580			/* if it's already enabled, disable */
 581			if (hcd->speed == HCD_USB3) {
 582				vhci_hcd->port_status[rhport] = 0;
 583				vhci_hcd->port_status[rhport] =
 584					(USB_SS_PORT_STAT_POWER |
 585					 USB_PORT_STAT_CONNECTION |
 586					 USB_PORT_STAT_RESET);
 587			} else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) {
 588				vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE
 589					| USB_PORT_STAT_LOW_SPEED
 590					| USB_PORT_STAT_HIGH_SPEED);
 591			}
 592
 593			/* 50msec reset signaling */
 594			vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
 595			fallthrough;
 596		default:
 597			usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
 598					  wValue);
 599			if (invalid_rhport) {
 600				pr_err("invalid port number %d\n", wIndex);
 601				goto error;
 602			}
 603			if (wValue >= 32)
 604				goto error;
 605			if (hcd->speed == HCD_USB3) {
 606				if ((vhci_hcd->port_status[rhport] &
 607				     USB_SS_PORT_STAT_POWER) != 0) {
 608					vhci_hcd->port_status[rhport] |= (1 << wValue);
 609				}
 610			} else
 611				if ((vhci_hcd->port_status[rhport] &
 612				     USB_PORT_STAT_POWER) != 0) {
 613					vhci_hcd->port_status[rhport] |= (1 << wValue);
 614				}
 615		}
 616		break;
 617	case GetPortErrorCount:
 618		usbip_dbg_vhci_rh(" GetPortErrorCount\n");
 619		if (hcd->speed != HCD_USB3) {
 620			pr_err("GetPortErrorCount req not "
 621			       "supported for USB 2.0 roothub\n");
 622			goto error;
 623		}
 624		/* We'll always return 0 since this is a dummy hub */
 625		*(__le32 *) buf = cpu_to_le32(0);
 626		break;
 627	case SetHubDepth:
 628		usbip_dbg_vhci_rh(" SetHubDepth\n");
 629		if (hcd->speed != HCD_USB3) {
 630			pr_err("SetHubDepth req not supported for "
 631			       "USB 2.0 roothub\n");
 632			goto error;
 633		}
 634		break;
 635	default:
 636		pr_err("default hub control req: %04x v%04x i%04x l%d\n",
 637			typeReq, wValue, wIndex, wLength);
 638error:
 639		/* "protocol stall" on error */
 640		retval = -EPIPE;
 641	}
 642
 643	if (usbip_dbg_flag_vhci_rh) {
 644		pr_debug("port %d\n", rhport);
 645		/* Only dump valid port status */
 646		if (!invalid_rhport) {
 647			dump_port_status_diff(prev_port_status[rhport],
 648					      vhci_hcd->port_status[rhport],
 649					      hcd->speed == HCD_USB3);
 650		}
 651	}
 652	usbip_dbg_vhci_rh(" bye\n");
 653
 654	spin_unlock_irqrestore(&vhci->lock, flags);
 655
 656	if (!invalid_rhport &&
 657	    (vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0) {
 658		usb_hcd_poll_rh_status(hcd);
 659	}
 660
 661	return retval;
 662}
 663
 664static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev)
 665{
 666	struct vhci_priv *priv;
 667	struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
 668	unsigned long flags;
 669
 670	priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);
 671	if (!priv) {
 672		usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
 673		return;
 674	}
 675
 676	spin_lock_irqsave(&vdev->priv_lock, flags);
 677
 678	priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
 679	if (priv->seqnum == 0xffff)
 680		dev_info(&urb->dev->dev, "seqnum max\n");
 681
 682	priv->vdev = vdev;
 683	priv->urb = urb;
 684
 685	urb->hcpriv = (void *) priv;
 686
 687	list_add_tail(&priv->list, &vdev->priv_tx);
 688
 689	wake_up(&vdev->waitq_tx);
 690	spin_unlock_irqrestore(&vdev->priv_lock, flags);
 691}
 692
 693static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 694{
 695	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
 696	struct vhci *vhci = vhci_hcd->vhci;
 697	struct device *dev = &urb->dev->dev;
 698	u8 portnum = urb->dev->portnum;
 699	int ret = 0;
 700	struct vhci_device *vdev;
 701	unsigned long flags;
 702
 703	if (portnum > VHCI_HC_PORTS) {
 704		pr_err("invalid port number %d\n", portnum);
 705		return -ENODEV;
 706	}
 707	vdev = &vhci_hcd->vdev[portnum-1];
 708
 709	if (!urb->transfer_buffer && !urb->num_sgs &&
 710	     urb->transfer_buffer_length) {
 711		dev_dbg(dev, "Null URB transfer buffer\n");
 712		return -EINVAL;
 713	}
 714
 715	spin_lock_irqsave(&vhci->lock, flags);
 716
 717	if (urb->status != -EINPROGRESS) {
 718		dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
 719		spin_unlock_irqrestore(&vhci->lock, flags);
 720		return urb->status;
 721	}
 722
 723	/* refuse enqueue for dead connection */
 724	spin_lock(&vdev->ud.lock);
 725	if (vdev->ud.status == VDEV_ST_NULL ||
 726	    vdev->ud.status == VDEV_ST_ERROR) {
 727		dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport);
 728		spin_unlock(&vdev->ud.lock);
 729		spin_unlock_irqrestore(&vhci->lock, flags);
 730		return -ENODEV;
 731	}
 732	spin_unlock(&vdev->ud.lock);
 733
 734	ret = usb_hcd_link_urb_to_ep(hcd, urb);
 735	if (ret)
 736		goto no_need_unlink;
 737
 738	/*
 739	 * The enumeration process is as follows;
 740	 *
 741	 *  1. Get_Descriptor request to DevAddrs(0) EndPoint(0)
 742	 *     to get max packet length of default pipe
 743	 *
 744	 *  2. Set_Address request to DevAddr(0) EndPoint(0)
 745	 *
 746	 */
 747	if (usb_pipedevice(urb->pipe) == 0) {
 748		__u8 type = usb_pipetype(urb->pipe);
 749		struct usb_ctrlrequest *ctrlreq =
 750			(struct usb_ctrlrequest *) urb->setup_packet;
 751
 752		if (type != PIPE_CONTROL || !ctrlreq) {
 753			dev_err(dev, "invalid request to devnum 0\n");
 754			ret = -EINVAL;
 755			goto no_need_xmit;
 756		}
 757
 758		switch (ctrlreq->bRequest) {
 759		case USB_REQ_SET_ADDRESS:
 760			/* set_address may come when a device is reset */
 761			dev_info(dev, "SetAddress Request (%d) to port %d\n",
 762				 ctrlreq->wValue, vdev->rhport);
 763
 764			usb_put_dev(vdev->udev);
 765			vdev->udev = usb_get_dev(urb->dev);
 766
 767			spin_lock(&vdev->ud.lock);
 768			vdev->ud.status = VDEV_ST_USED;
 769			spin_unlock(&vdev->ud.lock);
 770
 771			if (urb->status == -EINPROGRESS) {
 772				/* This request is successfully completed. */
 773				/* If not -EINPROGRESS, possibly unlinked. */
 774				urb->status = 0;
 775			}
 776
 777			goto no_need_xmit;
 778
 779		case USB_REQ_GET_DESCRIPTOR:
 780			if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8))
 781				usbip_dbg_vhci_hc(
 782					"Not yet?:Get_Descriptor to device 0 (get max pipe size)\n");
 783
 784			usb_put_dev(vdev->udev);
 785			vdev->udev = usb_get_dev(urb->dev);
 786			goto out;
 787
 788		default:
 789			/* NOT REACHED */
 790			dev_err(dev,
 791				"invalid request to devnum 0 bRequest %u, wValue %u\n",
 792				ctrlreq->bRequest,
 793				ctrlreq->wValue);
 794			ret =  -EINVAL;
 795			goto no_need_xmit;
 796		}
 797
 798	}
 799
 800out:
 801	vhci_tx_urb(urb, vdev);
 802	spin_unlock_irqrestore(&vhci->lock, flags);
 803
 804	return 0;
 805
 806no_need_xmit:
 807	usb_hcd_unlink_urb_from_ep(hcd, urb);
 808no_need_unlink:
 809	spin_unlock_irqrestore(&vhci->lock, flags);
 810	if (!ret) {
 811		/* usb_hcd_giveback_urb() should be called with
 812		 * irqs disabled
 813		 */
 814		local_irq_disable();
 815		usb_hcd_giveback_urb(hcd, urb, urb->status);
 816		local_irq_enable();
 817	}
 818	return ret;
 819}
 820
 821/*
 822 * vhci_rx gives back the urb after receiving the reply of the urb.  If an
 823 * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives
 824 * back its urb. For the driver unlinking the urb, the content of the urb is
 825 * not important, but the calling to its completion handler is important; the
 826 * completion of unlinking is notified by the completion handler.
 827 *
 828 *
 829 * CLIENT SIDE
 830 *
 831 * - When vhci_hcd receives RET_SUBMIT,
 832 *
 833 *	- case 1a). the urb of the pdu is not unlinking.
 834 *		- normal case
 835 *		=> just give back the urb
 836 *
 837 *	- case 1b). the urb of the pdu is unlinking.
 838 *		- usbip.ko will return a reply of the unlinking request.
 839 *		=> give back the urb now and go to case 2b).
 840 *
 841 * - When vhci_hcd receives RET_UNLINK,
 842 *
 843 *	- case 2a). a submit request is still pending in vhci_hcd.
 844 *		- urb was really pending in usbip.ko and urb_unlink_urb() was
 845 *		  completed there.
 846 *		=> free a pending submit request
 847 *		=> notify unlink completeness by giving back the urb
 848 *
 849 *	- case 2b). a submit request is *not* pending in vhci_hcd.
 850 *		- urb was already given back to the core driver.
 851 *		=> do not give back the urb
 852 *
 853 *
 854 * SERVER SIDE
 855 *
 856 * - When usbip receives CMD_UNLINK,
 857 *
 858 *	- case 3a). the urb of the unlink request is now in submission.
 859 *		=> do usb_unlink_urb().
 860 *		=> after the unlink is completed, send RET_UNLINK.
 861 *
 862 *	- case 3b). the urb of the unlink request is not in submission.
 863 *		- may be already completed or never be received
 864 *		=> send RET_UNLINK
 865 *
 866 */
 867static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 868{
 869	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
 870	struct vhci *vhci = vhci_hcd->vhci;
 871	struct vhci_priv *priv;
 872	struct vhci_device *vdev;
 873	unsigned long flags;
 874
 875	spin_lock_irqsave(&vhci->lock, flags);
 876
 877	priv = urb->hcpriv;
 878	if (!priv) {
 879		/* URB was never linked! or will be soon given back by
 880		 * vhci_rx. */
 881		spin_unlock_irqrestore(&vhci->lock, flags);
 882		return -EIDRM;
 883	}
 884
 885	{
 886		int ret = 0;
 887
 888		ret = usb_hcd_check_unlink_urb(hcd, urb, status);
 889		if (ret) {
 890			spin_unlock_irqrestore(&vhci->lock, flags);
 891			return ret;
 892		}
 893	}
 894
 895	 /* send unlink request here? */
 896	vdev = priv->vdev;
 897
 898	if (!vdev->ud.tcp_socket) {
 899		/* tcp connection is closed */
 900		spin_lock(&vdev->priv_lock);
 901
 902		list_del(&priv->list);
 903		kfree(priv);
 904		urb->hcpriv = NULL;
 905
 906		spin_unlock(&vdev->priv_lock);
 907
 908		/*
 909		 * If tcp connection is alive, we have sent CMD_UNLINK.
 910		 * vhci_rx will receive RET_UNLINK and give back the URB.
 911		 * Otherwise, we give back it here.
 912		 */
 913		usb_hcd_unlink_urb_from_ep(hcd, urb);
 914
 915		spin_unlock_irqrestore(&vhci->lock, flags);
 916		usb_hcd_giveback_urb(hcd, urb, urb->status);
 917		spin_lock_irqsave(&vhci->lock, flags);
 918
 919	} else {
 920		/* tcp connection is alive */
 921		struct vhci_unlink *unlink;
 922
 923		spin_lock(&vdev->priv_lock);
 924
 925		/* setup CMD_UNLINK pdu */
 926		unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
 927		if (!unlink) {
 928			spin_unlock(&vdev->priv_lock);
 929			spin_unlock_irqrestore(&vhci->lock, flags);
 930			usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
 931			return -ENOMEM;
 932		}
 933
 934		unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
 935		if (unlink->seqnum == 0xffff)
 936			pr_info("seqnum max\n");
 937
 938		unlink->unlink_seqnum = priv->seqnum;
 939
 940		/* send cmd_unlink and try to cancel the pending URB in the
 941		 * peer */
 942		list_add_tail(&unlink->list, &vdev->unlink_tx);
 943		wake_up(&vdev->waitq_tx);
 944
 945		spin_unlock(&vdev->priv_lock);
 946	}
 947
 948	spin_unlock_irqrestore(&vhci->lock, flags);
 949
 950	usbip_dbg_vhci_hc("leave\n");
 951	return 0;
 952}
 953
 954static void vhci_cleanup_unlink_list(struct vhci_device *vdev,
 955		struct list_head *unlink_list)
 956{
 957	struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
 958	struct usb_hcd *hcd = vhci_hcd_to_hcd(vhci_hcd);
 959	struct vhci *vhci = vhci_hcd->vhci;
 960	struct vhci_unlink *unlink, *tmp;
 961	unsigned long flags;
 962
 963	spin_lock_irqsave(&vhci->lock, flags);
 964	spin_lock(&vdev->priv_lock);
 965
 966	list_for_each_entry_safe(unlink, tmp, unlink_list, list) {
 967		struct urb *urb;
 968
 969		urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
 970		if (!urb) {
 971			list_del(&unlink->list);
 972			kfree(unlink);
 973			continue;
 974		}
 975
 976		urb->status = -ENODEV;
 977
 978		usb_hcd_unlink_urb_from_ep(hcd, urb);
 979
 980		list_del(&unlink->list);
 981
 982		spin_unlock(&vdev->priv_lock);
 983		spin_unlock_irqrestore(&vhci->lock, flags);
 984
 985		usb_hcd_giveback_urb(hcd, urb, urb->status);
 986
 987		spin_lock_irqsave(&vhci->lock, flags);
 988		spin_lock(&vdev->priv_lock);
 989
 990		kfree(unlink);
 991	}
 992
 993	spin_unlock(&vdev->priv_lock);
 994	spin_unlock_irqrestore(&vhci->lock, flags);
 995}
 996
 997static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
 998{
 999	/* give back URB of unsent unlink request */
1000	vhci_cleanup_unlink_list(vdev, &vdev->unlink_tx);
1001
1002	/* give back URB of unanswered unlink request */
1003	vhci_cleanup_unlink_list(vdev, &vdev->unlink_rx);
1004}
1005
1006/*
1007 * The important thing is that only one context begins cleanup.
1008 * This is why error handling and cleanup become simple.
1009 * We do not want to consider race condition as possible.
1010 */
1011static void vhci_shutdown_connection(struct usbip_device *ud)
1012{
1013	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
1014
1015	/* need this? see stub_dev.c */
1016	if (ud->tcp_socket) {
1017		pr_debug("shutdown tcp_socket %d\n", ud->sockfd);
1018		kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
1019	}
1020
1021	/* kill threads related to this sdev */
1022	if (vdev->ud.tcp_rx) {
1023		kthread_stop_put(vdev->ud.tcp_rx);
1024		vdev->ud.tcp_rx = NULL;
1025	}
1026	if (vdev->ud.tcp_tx) {
1027		kthread_stop_put(vdev->ud.tcp_tx);
1028		vdev->ud.tcp_tx = NULL;
1029	}
1030	pr_info("stop threads\n");
1031
1032	/* active connection is closed */
1033	if (vdev->ud.tcp_socket) {
1034		sockfd_put(vdev->ud.tcp_socket);
1035		vdev->ud.tcp_socket = NULL;
1036		vdev->ud.sockfd = -1;
1037	}
1038	pr_info("release socket\n");
1039
1040	vhci_device_unlink_cleanup(vdev);
1041
1042	/*
1043	 * rh_port_disconnect() is a trigger of ...
1044	 *   usb_disable_device():
1045	 *	disable all the endpoints for a USB device.
1046	 *   usb_disable_endpoint():
1047	 *	disable endpoints. pending urbs are unlinked(dequeued).
1048	 *
1049	 * NOTE: After calling rh_port_disconnect(), the USB device drivers of a
1050	 * detached device should release used urbs in a cleanup function (i.e.
1051	 * xxx_disconnect()). Therefore, vhci_hcd does not need to release
1052	 * pushed urbs and their private data in this function.
1053	 *
1054	 * NOTE: vhci_dequeue() must be considered carefully. When shutting down
1055	 * a connection, vhci_shutdown_connection() expects vhci_dequeue()
1056	 * gives back pushed urbs and frees their private data by request of
1057	 * the cleanup function of a USB driver. When unlinking a urb with an
1058	 * active connection, vhci_dequeue() does not give back the urb which
1059	 * is actually given back by vhci_rx after receiving its return pdu.
1060	 *
1061	 */
1062	rh_port_disconnect(vdev);
1063
1064	pr_info("disconnect device\n");
1065}
1066
1067static void vhci_device_reset(struct usbip_device *ud)
1068{
1069	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
1070	unsigned long flags;
1071
1072	spin_lock_irqsave(&ud->lock, flags);
1073
1074	vdev->speed  = 0;
1075	vdev->devid  = 0;
1076
1077	usb_put_dev(vdev->udev);
1078	vdev->udev = NULL;
1079
1080	if (ud->tcp_socket) {
1081		sockfd_put(ud->tcp_socket);
1082		ud->tcp_socket = NULL;
1083		ud->sockfd = -1;
1084	}
1085	ud->status = VDEV_ST_NULL;
1086
1087	spin_unlock_irqrestore(&ud->lock, flags);
1088}
1089
1090static void vhci_device_unusable(struct usbip_device *ud)
1091{
1092	unsigned long flags;
1093
1094	spin_lock_irqsave(&ud->lock, flags);
1095	ud->status = VDEV_ST_ERROR;
1096	spin_unlock_irqrestore(&ud->lock, flags);
1097}
1098
1099static void vhci_device_init(struct vhci_device *vdev)
1100{
1101	memset(vdev, 0, sizeof(struct vhci_device));
1102
1103	vdev->ud.side   = USBIP_VHCI;
1104	vdev->ud.status = VDEV_ST_NULL;
1105	spin_lock_init(&vdev->ud.lock);
1106	mutex_init(&vdev->ud.sysfs_lock);
1107
1108	INIT_LIST_HEAD(&vdev->priv_rx);
1109	INIT_LIST_HEAD(&vdev->priv_tx);
1110	INIT_LIST_HEAD(&vdev->unlink_tx);
1111	INIT_LIST_HEAD(&vdev->unlink_rx);
1112	spin_lock_init(&vdev->priv_lock);
1113
1114	init_waitqueue_head(&vdev->waitq_tx);
1115
1116	vdev->ud.eh_ops.shutdown = vhci_shutdown_connection;
1117	vdev->ud.eh_ops.reset = vhci_device_reset;
1118	vdev->ud.eh_ops.unusable = vhci_device_unusable;
1119
1120	usbip_start_eh(&vdev->ud);
1121}
1122
1123static int hcd_name_to_id(const char *name)
1124{
1125	char *c;
1126	long val;
1127	int ret;
1128
1129	c = strchr(name, '.');
1130	if (c == NULL)
1131		return 0;
1132
1133	ret = kstrtol(c+1, 10, &val);
1134	if (ret < 0)
1135		return ret;
1136
1137	return val;
1138}
1139
1140static int vhci_setup(struct usb_hcd *hcd)
1141{
1142	struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
1143	if (usb_hcd_is_primary_hcd(hcd)) {
1144		vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd);
1145		vhci->vhci_hcd_hs->vhci = vhci;
1146		/*
1147		 * Mark the first roothub as being USB 2.0.
1148		 * The USB 3.0 roothub will be registered later by
1149		 * vhci_hcd_probe()
1150		 */
1151		hcd->speed = HCD_USB2;
1152		hcd->self.root_hub->speed = USB_SPEED_HIGH;
1153	} else {
1154		vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd);
1155		vhci->vhci_hcd_ss->vhci = vhci;
1156		hcd->speed = HCD_USB3;
1157		hcd->self.root_hub->speed = USB_SPEED_SUPER;
1158	}
1159
1160	/*
1161	 * Support SG.
1162	 * sg_tablesize is an arbitrary value to alleviate memory pressure
1163	 * on the host.
1164	 */
1165	hcd->self.sg_tablesize = 32;
1166	hcd->self.no_sg_constraint = 1;
1167
1168	return 0;
1169}
1170
1171static int vhci_start(struct usb_hcd *hcd)
1172{
1173	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
1174	int id, rhport;
1175	int err;
1176
1177	usbip_dbg_vhci_hc("enter vhci_start\n");
1178
1179	if (usb_hcd_is_primary_hcd(hcd))
1180		spin_lock_init(&vhci_hcd->vhci->lock);
1181
1182	/* initialize private data of usb_hcd */
1183
1184	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
1185		struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
1186
1187		vhci_device_init(vdev);
1188		vdev->rhport = rhport;
1189	}
1190
1191	atomic_set(&vhci_hcd->seqnum, 0);
1192
1193	hcd->power_budget = 0; /* no limit */
1194	hcd->uses_new_polling = 1;
1195
1196#ifdef CONFIG_USB_OTG
1197	hcd->self.otg_port = 1;
1198#endif
1199
1200	id = hcd_name_to_id(hcd_name(hcd));
1201	if (id < 0) {
1202		pr_err("invalid vhci name %s\n", hcd_name(hcd));
1203		return -EINVAL;
1204	}
1205
1206	/* vhci_hcd is now ready to be controlled through sysfs */
1207	if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
1208		err = vhci_init_attr_group();
1209		if (err) {
1210			dev_err(hcd_dev(hcd), "init attr group failed, err = %d\n", err);
1211			return err;
1212		}
1213		err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
1214		if (err) {
1215			dev_err(hcd_dev(hcd), "create sysfs files failed, err = %d\n", err);
1216			vhci_finish_attr_group();
1217			return err;
1218		}
1219		pr_info("created sysfs %s\n", hcd_name(hcd));
1220	}
1221
1222	return 0;
1223}
1224
1225static void vhci_stop(struct usb_hcd *hcd)
1226{
1227	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
1228	int id, rhport;
1229
1230	usbip_dbg_vhci_hc("stop VHCI controller\n");
1231
1232	/* 1. remove the userland interface of vhci_hcd */
1233	id = hcd_name_to_id(hcd_name(hcd));
1234	if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
1235		sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
1236		vhci_finish_attr_group();
1237	}
1238
1239	/* 2. shutdown all the ports of vhci_hcd */
1240	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
1241		struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
1242
1243		usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
1244		usbip_stop_eh(&vdev->ud);
1245	}
1246}
1247
1248static int vhci_get_frame_number(struct usb_hcd *hcd)
1249{
1250	dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n");
1251	return 0;
1252}
1253
1254#ifdef CONFIG_PM
1255
1256/* FIXME: suspend/resume */
1257static int vhci_bus_suspend(struct usb_hcd *hcd)
1258{
1259	struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
1260	unsigned long flags;
1261
1262	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
1263
1264	spin_lock_irqsave(&vhci->lock, flags);
1265	hcd->state = HC_STATE_SUSPENDED;
1266	spin_unlock_irqrestore(&vhci->lock, flags);
1267
1268	return 0;
1269}
1270
1271static int vhci_bus_resume(struct usb_hcd *hcd)
1272{
1273	struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
1274	int rc = 0;
1275	unsigned long flags;
1276
1277	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
1278
1279	spin_lock_irqsave(&vhci->lock, flags);
1280	if (!HCD_HW_ACCESSIBLE(hcd))
1281		rc = -ESHUTDOWN;
1282	else
1283		hcd->state = HC_STATE_RUNNING;
1284	spin_unlock_irqrestore(&vhci->lock, flags);
1285
1286	return rc;
1287}
1288
1289#else
1290
1291#define vhci_bus_suspend      NULL
1292#define vhci_bus_resume       NULL
1293#endif
1294
1295/* Change a group of bulk endpoints to support multiple stream IDs */
1296static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
1297	struct usb_host_endpoint **eps, unsigned int num_eps,
1298	unsigned int num_streams, gfp_t mem_flags)
1299{
1300	dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n");
1301	return 0;
1302}
1303
1304/* Reverts a group of bulk endpoints back to not using stream IDs. */
1305static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
1306	struct usb_host_endpoint **eps, unsigned int num_eps,
1307	gfp_t mem_flags)
1308{
1309	dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n");
1310	return 0;
1311}
1312
1313static const struct hc_driver vhci_hc_driver = {
1314	.description	= driver_name,
1315	.product_desc	= driver_desc,
1316	.hcd_priv_size	= sizeof(struct vhci_hcd),
1317
1318	.flags		= HCD_USB3 | HCD_SHARED,
1319
1320	.reset		= vhci_setup,
1321	.start		= vhci_start,
1322	.stop		= vhci_stop,
1323
1324	.urb_enqueue	= vhci_urb_enqueue,
1325	.urb_dequeue	= vhci_urb_dequeue,
1326
1327	.get_frame_number = vhci_get_frame_number,
1328
1329	.hub_status_data = vhci_hub_status,
1330	.hub_control    = vhci_hub_control,
1331	.bus_suspend	= vhci_bus_suspend,
1332	.bus_resume	= vhci_bus_resume,
1333
1334	.alloc_streams	= vhci_alloc_streams,
1335	.free_streams	= vhci_free_streams,
1336};
1337
1338static int vhci_hcd_probe(struct platform_device *pdev)
1339{
1340	struct vhci             *vhci = *((void **)dev_get_platdata(&pdev->dev));
1341	struct usb_hcd		*hcd_hs;
1342	struct usb_hcd		*hcd_ss;
1343	int			ret;
1344
1345	usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
1346
1347	/*
1348	 * Allocate and initialize hcd.
1349	 * Our private data is also allocated automatically.
1350	 */
1351	hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
1352	if (!hcd_hs) {
1353		pr_err("create primary hcd failed\n");
1354		return -ENOMEM;
1355	}
1356	hcd_hs->has_tt = 1;
1357
1358	/*
1359	 * Finish generic HCD structure initialization and register.
1360	 * Call the driver's reset() and start() routines.
1361	 */
1362	ret = usb_add_hcd(hcd_hs, 0, 0);
1363	if (ret != 0) {
1364		pr_err("usb_add_hcd hs failed %d\n", ret);
1365		goto put_usb2_hcd;
1366	}
1367
1368	hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev,
1369				       dev_name(&pdev->dev), hcd_hs);
1370	if (!hcd_ss) {
1371		ret = -ENOMEM;
1372		pr_err("create shared hcd failed\n");
1373		goto remove_usb2_hcd;
1374	}
1375
1376	ret = usb_add_hcd(hcd_ss, 0, 0);
1377	if (ret) {
1378		pr_err("usb_add_hcd ss failed %d\n", ret);
1379		goto put_usb3_hcd;
1380	}
1381
1382	usbip_dbg_vhci_hc("bye\n");
1383	return 0;
1384
1385put_usb3_hcd:
1386	usb_put_hcd(hcd_ss);
1387remove_usb2_hcd:
1388	usb_remove_hcd(hcd_hs);
1389put_usb2_hcd:
1390	usb_put_hcd(hcd_hs);
1391	vhci->vhci_hcd_hs = NULL;
1392	vhci->vhci_hcd_ss = NULL;
1393	return ret;
1394}
1395
1396static int vhci_hcd_remove(struct platform_device *pdev)
1397{
1398	struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev));
1399
1400	/*
1401	 * Disconnects the root hub,
1402	 * then reverses the effects of usb_add_hcd(),
1403	 * invoking the HCD's stop() methods.
1404	 */
1405	usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
1406	usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
1407
1408	usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
1409	usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
1410
1411	vhci->vhci_hcd_hs = NULL;
1412	vhci->vhci_hcd_ss = NULL;
1413
1414	return 0;
1415}
1416
1417#ifdef CONFIG_PM
1418
1419/* what should happen for USB/IP under suspend/resume? */
1420static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
1421{
1422	struct usb_hcd *hcd;
1423	struct vhci *vhci;
1424	int rhport;
1425	int connected = 0;
1426	int ret = 0;
1427	unsigned long flags;
1428
1429	dev_dbg(&pdev->dev, "%s\n", __func__);
1430
1431	hcd = platform_get_drvdata(pdev);
1432	if (!hcd)
1433		return 0;
1434
1435	vhci = *((void **)dev_get_platdata(hcd->self.controller));
1436
1437	spin_lock_irqsave(&vhci->lock, flags);
1438
1439	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
1440		if (vhci->vhci_hcd_hs->port_status[rhport] &
1441		    USB_PORT_STAT_CONNECTION)
1442			connected += 1;
1443
1444		if (vhci->vhci_hcd_ss->port_status[rhport] &
1445		    USB_PORT_STAT_CONNECTION)
1446			connected += 1;
1447	}
1448
1449	spin_unlock_irqrestore(&vhci->lock, flags);
1450
1451	if (connected > 0) {
1452		dev_info(&pdev->dev,
1453			 "We have %d active connection%s. Do not suspend.\n",
1454			 connected, (connected == 1 ? "" : "s"));
1455		ret =  -EBUSY;
1456	} else {
1457		dev_info(&pdev->dev, "suspend vhci_hcd");
1458		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
1459	}
1460
1461	return ret;
1462}
1463
1464static int vhci_hcd_resume(struct platform_device *pdev)
1465{
1466	struct usb_hcd *hcd;
1467
1468	dev_dbg(&pdev->dev, "%s\n", __func__);
1469
1470	hcd = platform_get_drvdata(pdev);
1471	if (!hcd)
1472		return 0;
1473	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
1474	usb_hcd_poll_rh_status(hcd);
1475
1476	return 0;
1477}
1478
1479#else
1480
1481#define vhci_hcd_suspend	NULL
1482#define vhci_hcd_resume		NULL
1483
1484#endif
1485
1486static struct platform_driver vhci_driver = {
1487	.probe	= vhci_hcd_probe,
1488	.remove	= vhci_hcd_remove,
1489	.suspend = vhci_hcd_suspend,
1490	.resume	= vhci_hcd_resume,
1491	.driver	= {
1492		.name = driver_name,
1493	},
1494};
1495
1496static void del_platform_devices(void)
1497{
1498	struct platform_device *pdev;
1499	int i;
1500
1501	for (i = 0; i < vhci_num_controllers; i++) {
1502		pdev = vhcis[i].pdev;
1503		if (pdev != NULL)
1504			platform_device_unregister(pdev);
1505		vhcis[i].pdev = NULL;
1506	}
1507	sysfs_remove_link(&platform_bus.kobj, driver_name);
1508}
1509
1510static int __init vhci_hcd_init(void)
1511{
1512	int i, ret;
1513
1514	if (usb_disabled())
1515		return -ENODEV;
1516
1517	if (vhci_num_controllers < 1)
1518		vhci_num_controllers = 1;
1519
1520	vhcis = kcalloc(vhci_num_controllers, sizeof(struct vhci), GFP_KERNEL);
1521	if (vhcis == NULL)
1522		return -ENOMEM;
1523
1524	for (i = 0; i < vhci_num_controllers; i++) {
1525		vhcis[i].pdev = platform_device_alloc(driver_name, i);
1526		if (!vhcis[i].pdev) {
1527			i--;
1528			while (i >= 0)
1529				platform_device_put(vhcis[i--].pdev);
1530			ret = -ENOMEM;
1531			goto err_device_alloc;
1532		}
1533	}
1534	for (i = 0; i < vhci_num_controllers; i++) {
1535		void *vhci = &vhcis[i];
1536		ret = platform_device_add_data(vhcis[i].pdev, &vhci, sizeof(void *));
1537		if (ret)
1538			goto err_driver_register;
1539	}
1540
1541	ret = platform_driver_register(&vhci_driver);
1542	if (ret)
1543		goto err_driver_register;
1544
1545	for (i = 0; i < vhci_num_controllers; i++) {
1546		ret = platform_device_add(vhcis[i].pdev);
1547		if (ret < 0) {
1548			i--;
1549			while (i >= 0)
1550				platform_device_del(vhcis[i--].pdev);
1551			goto err_add_hcd;
1552		}
1553	}
1554
1555	return ret;
1556
1557err_add_hcd:
1558	platform_driver_unregister(&vhci_driver);
1559err_driver_register:
1560	for (i = 0; i < vhci_num_controllers; i++)
1561		platform_device_put(vhcis[i].pdev);
1562err_device_alloc:
1563	kfree(vhcis);
1564	return ret;
1565}
1566
1567static void __exit vhci_hcd_exit(void)
1568{
1569	del_platform_devices();
1570	platform_driver_unregister(&vhci_driver);
1571	kfree(vhcis);
1572}
1573
1574module_init(vhci_hcd_init);
1575module_exit(vhci_hcd_exit);
1576
1577MODULE_AUTHOR(DRIVER_AUTHOR);
1578MODULE_DESCRIPTION(DRIVER_DESC);
1579MODULE_LICENSE("GPL");