Linux Audio

Check our new training course

Linux BSP development engineering services

Need help to port Linux and bootloaders to your hardware?
Loading...
v3.1
 
  1/*
  2 * xHCI host controller driver
  3 *
  4 * Copyright (C) 2008 Intel Corp.
  5 *
  6 * Author: Sarah Sharp
  7 * Some code borrowed from the Linux EHCI driver.
  8 *
  9 * This program is free software; you can redistribute it and/or modify
 10 * it under the terms of the GNU General Public License version 2 as
 11 * published by the Free Software Foundation.
 12 *
 13 * This program is distributed in the hope that it will be useful, but
 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 15 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 16 * for more details.
 17 *
 18 * You should have received a copy of the GNU General Public License
 19 * along with this program; if not, write to the Free Software Foundation,
 20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 21 */
 22/* Up to 16 ms to halt an HC */
 23#define XHCI_MAX_HALT_USEC	(16*1000)
 
 24/* HC not running - set to 1 when run/stop bit is cleared. */
 25#define XHCI_STS_HALT		(1<<0)
 26
 27/* HCCPARAMS offset from PCI base address */
 28#define XHCI_HCC_PARAMS_OFFSET	0x10
 29/* HCCPARAMS contains the first extended capability pointer */
 30#define XHCI_HCC_EXT_CAPS(p)	(((p)>>16)&0xffff)
 31
 32/* Command and Status registers offset from the Operational Registers address */
 33#define XHCI_CMD_OFFSET		0x00
 34#define XHCI_STS_OFFSET		0x04
 35
 36#define XHCI_MAX_EXT_CAPS		50
 37
 38/* Capability Register */
 39/* bits 7:0 - how long is the Capabilities register */
 40#define XHCI_HC_LENGTH(p)	(((p)>>00)&0x00ff)
 41
 42/* Extended capability register fields */
 43#define XHCI_EXT_CAPS_ID(p)	(((p)>>0)&0xff)
 44#define XHCI_EXT_CAPS_NEXT(p)	(((p)>>8)&0xff)
 45#define	XHCI_EXT_CAPS_VAL(p)	((p)>>16)
 46/* Extended capability IDs - ID 0 reserved */
 47#define XHCI_EXT_CAPS_LEGACY	1
 48#define XHCI_EXT_CAPS_PROTOCOL	2
 49#define XHCI_EXT_CAPS_PM	3
 50#define XHCI_EXT_CAPS_VIRT	4
 51#define XHCI_EXT_CAPS_ROUTE	5
 52/* IDs 6-9 reserved */
 53#define XHCI_EXT_CAPS_DEBUG	10
 
 
 54/* USB Legacy Support Capability - section 7.1.1 */
 55#define XHCI_HC_BIOS_OWNED	(1 << 16)
 56#define XHCI_HC_OS_OWNED	(1 << 24)
 57
 58/* USB Legacy Support Capability - section 7.1.1 */
 59/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
 60#define XHCI_LEGACY_SUPPORT_OFFSET	(0x00)
 61
 62/* USB Legacy Support Control and Status Register  - section 7.1.2 */
 63/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
 64#define XHCI_LEGACY_CONTROL_OFFSET	(0x04)
 65/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
 66#define	XHCI_LEGACY_DISABLE_SMI		((0x3 << 1) + (0xff << 5) + (0x7 << 17))
 
 
 
 
 
 
 
 
 67
 68/* command register values to disable interrupts and halt the HC */
 69/* start/stop HC execution - do not write unless HC is halted*/
 70#define XHCI_CMD_RUN		(1 << 0)
 71/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
 72#define XHCI_CMD_EIE		(1 << 2)
 73/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
 74#define XHCI_CMD_HSEIE		(1 << 3)
 75/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
 76#define XHCI_CMD_EWE		(1 << 10)
 77
 78#define XHCI_IRQS		(XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
 79
 80/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
 81#define XHCI_STS_CNR		(1 << 11)
 82
 83#include <linux/io.h>
 84
 85/**
 86 * Return the next extended capability pointer register.
 87 *
 88 * @base	PCI register base address.
 89 *
 90 * @ext_offset	Offset of the 32-bit register that contains the extended
 91 * capabilites pointer.  If searching for the first extended capability, pass
 92 * in XHCI_HCC_PARAMS_OFFSET.  If searching for the next extended capability,
 93 * pass in the offset of the current extended capability register.
 94 *
 95 * Returns 0 if there is no next extended capability register or returns the register offset
 96 * from the PCI registers base address.
 97 */
 98static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset)
 99{
100	u32 next;
101
102	next = readl(base + ext_offset);
103
104	if (ext_offset == XHCI_HCC_PARAMS_OFFSET) {
105		/* Find the first extended capability */
106		next = XHCI_HCC_EXT_CAPS(next);
107		ext_offset = 0;
108	} else {
109		/* Find the next extended capability */
110		next = XHCI_EXT_CAPS_NEXT(next);
111	}
112
113	if (!next)
114		return 0;
115	/*
116	 * Address calculation from offset of extended capabilities
117	 * (or HCCPARAMS) register - see section 5.3.6 and section 7.
118	 */
119	return ext_offset + (next << 2);
120}
121
122/**
123 * Find the offset of the extended capabilities with capability ID id.
124 *
125 * @base PCI MMIO registers base address.
126 * @ext_offset Offset from base of the first extended capability to look at,
127 * 		or the address of HCCPARAMS.
128 * @id Extended capability ID to search for.
129 *
130 * This uses an arbitrary limit of XHCI_MAX_EXT_CAPS extended capabilities
131 * to make sure that the list doesn't contain a loop.
 
 
132 */
133static inline int xhci_find_ext_cap_by_id(void __iomem *base, int ext_offset, int id)
 
134{
135	u32 val;
136	int limit = XHCI_MAX_EXT_CAPS;
 
137
138	while (ext_offset && limit > 0) {
139		val = readl(base + ext_offset);
140		if (XHCI_EXT_CAPS_ID(val) == id)
141			break;
142		ext_offset = xhci_find_next_cap_offset(base, ext_offset);
143		limit--;
 
 
144	}
145	if (limit > 0)
146		return ext_offset;
 
 
 
 
 
 
 
 
 
147	return 0;
148}
v6.2
  1/* SPDX-License-Identifier: GPL-2.0 */
  2/*
  3 * xHCI host controller driver
  4 *
  5 * Copyright (C) 2008 Intel Corp.
  6 *
  7 * Author: Sarah Sharp
  8 * Some code borrowed from the Linux EHCI driver.
 
 
 
 
 
 
 
 
 
 
 
 
 
  9 */
 10
 11/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */
 12#define XHCI_MAX_HALT_USEC	(32 * 1000)
 13/* HC not running - set to 1 when run/stop bit is cleared. */
 14#define XHCI_STS_HALT		(1<<0)
 15
 16/* HCCPARAMS offset from PCI base address */
 17#define XHCI_HCC_PARAMS_OFFSET	0x10
 18/* HCCPARAMS contains the first extended capability pointer */
 19#define XHCI_HCC_EXT_CAPS(p)	(((p)>>16)&0xffff)
 20
 21/* Command and Status registers offset from the Operational Registers address */
 22#define XHCI_CMD_OFFSET		0x00
 23#define XHCI_STS_OFFSET		0x04
 24
 25#define XHCI_MAX_EXT_CAPS		50
 26
 27/* Capability Register */
 28/* bits 7:0 - how long is the Capabilities register */
 29#define XHCI_HC_LENGTH(p)	(((p)>>00)&0x00ff)
 30
 31/* Extended capability register fields */
 32#define XHCI_EXT_CAPS_ID(p)	(((p)>>0)&0xff)
 33#define XHCI_EXT_CAPS_NEXT(p)	(((p)>>8)&0xff)
 34#define	XHCI_EXT_CAPS_VAL(p)	((p)>>16)
 35/* Extended capability IDs - ID 0 reserved */
 36#define XHCI_EXT_CAPS_LEGACY	1
 37#define XHCI_EXT_CAPS_PROTOCOL	2
 38#define XHCI_EXT_CAPS_PM	3
 39#define XHCI_EXT_CAPS_VIRT	4
 40#define XHCI_EXT_CAPS_ROUTE	5
 41/* IDs 6-9 reserved */
 42#define XHCI_EXT_CAPS_DEBUG	10
 43/* Vendor caps */
 44#define XHCI_EXT_CAPS_VENDOR_INTEL	192
 45/* USB Legacy Support Capability - section 7.1.1 */
 46#define XHCI_HC_BIOS_OWNED	(1 << 16)
 47#define XHCI_HC_OS_OWNED	(1 << 24)
 48
 49/* USB Legacy Support Capability - section 7.1.1 */
 50/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
 51#define XHCI_LEGACY_SUPPORT_OFFSET	(0x00)
 52
 53/* USB Legacy Support Control and Status Register  - section 7.1.2 */
 54/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
 55#define XHCI_LEGACY_CONTROL_OFFSET	(0x04)
 56/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
 57#define	XHCI_LEGACY_DISABLE_SMI		((0x7 << 1) + (0xff << 5) + (0x7 << 17))
 58#define XHCI_LEGACY_SMI_EVENTS		(0x7 << 29)
 59
 60/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
 61#define XHCI_L1C               (1 << 16)
 62
 63/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
 64#define XHCI_HLC               (1 << 19)
 65#define XHCI_BLC               (1 << 20)
 66
 67/* command register values to disable interrupts and halt the HC */
 68/* start/stop HC execution - do not write unless HC is halted*/
 69#define XHCI_CMD_RUN		(1 << 0)
 70/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
 71#define XHCI_CMD_EIE		(1 << 2)
 72/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
 73#define XHCI_CMD_HSEIE		(1 << 3)
 74/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
 75#define XHCI_CMD_EWE		(1 << 10)
 76
 77#define XHCI_IRQS		(XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
 78
 79/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
 80#define XHCI_STS_CNR		(1 << 11)
 81
 82#include <linux/io.h>
 83
 84/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 85 * Find the offset of the extended capabilities with capability ID id.
 86 *
 87 * @base	PCI MMIO registers base address.
 88 * @start	address at which to start looking, (0 or HCC_PARAMS to start at
 89 *		beginning of list)
 90 * @id		Extended capability ID to search for, or 0 for the next
 91 *		capability
 92 *
 93 * Returns the offset of the next matching extended capability structure.
 94 * Some capabilities can occur several times, e.g., the XHCI_EXT_CAPS_PROTOCOL,
 95 * and this provides a way to find them all.
 96 */
 97
 98static inline int xhci_find_next_ext_cap(void __iomem *base, u32 start, int id)
 99{
100	u32 val;
101	u32 next;
102	u32 offset;
103
104	offset = start;
105	if (!start || start == XHCI_HCC_PARAMS_OFFSET) {
106		val = readl(base + XHCI_HCC_PARAMS_OFFSET);
107		if (val == ~0)
108			return 0;
109		offset = XHCI_HCC_EXT_CAPS(val) << 2;
110		if (!offset)
111			return 0;
112	}
113	do {
114		val = readl(base + offset);
115		if (val == ~0)
116			return 0;
117		if (offset != start && (id == 0 || XHCI_EXT_CAPS_ID(val) == id))
118			return offset;
119
120		next = XHCI_EXT_CAPS_NEXT(val);
121		offset += next << 2;
122	} while (next);
123
124	return 0;
125}