Loading...
1/*
2 * Driver for Motorola IMX serial ports
3 *
4 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
5 *
6 * Author: Sascha Hauer <sascha@saschahauer.de>
7 * Copyright (C) 2004 Pengutronix
8 *
9 * Copyright (C) 2009 emlix GmbH
10 * Author: Fabian Godehardt (added IrDA support for iMX)
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 *
26 * [29-Mar-2005] Mike Lee
27 * Added hardware handshake
28 */
29
30#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
31#define SUPPORT_SYSRQ
32#endif
33
34#include <linux/module.h>
35#include <linux/ioport.h>
36#include <linux/init.h>
37#include <linux/console.h>
38#include <linux/sysrq.h>
39#include <linux/platform_device.h>
40#include <linux/tty.h>
41#include <linux/tty_flip.h>
42#include <linux/serial_core.h>
43#include <linux/serial.h>
44#include <linux/clk.h>
45#include <linux/delay.h>
46#include <linux/rational.h>
47#include <linux/slab.h>
48#include <linux/of.h>
49#include <linux/of_device.h>
50
51#include <asm/io.h>
52#include <asm/irq.h>
53#include <mach/imx-uart.h>
54
55/* Register definitions */
56#define URXD0 0x0 /* Receiver Register */
57#define URTX0 0x40 /* Transmitter Register */
58#define UCR1 0x80 /* Control Register 1 */
59#define UCR2 0x84 /* Control Register 2 */
60#define UCR3 0x88 /* Control Register 3 */
61#define UCR4 0x8c /* Control Register 4 */
62#define UFCR 0x90 /* FIFO Control Register */
63#define USR1 0x94 /* Status Register 1 */
64#define USR2 0x98 /* Status Register 2 */
65#define UESC 0x9c /* Escape Character Register */
66#define UTIM 0xa0 /* Escape Timer Register */
67#define UBIR 0xa4 /* BRM Incremental Register */
68#define UBMR 0xa8 /* BRM Modulator Register */
69#define UBRC 0xac /* Baud Rate Count Register */
70#define IMX21_ONEMS 0xb0 /* One Millisecond register */
71#define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */
72#define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/
73
74/* UART Control Register Bit Fields.*/
75#define URXD_CHARRDY (1<<15)
76#define URXD_ERR (1<<14)
77#define URXD_OVRRUN (1<<13)
78#define URXD_FRMERR (1<<12)
79#define URXD_BRK (1<<11)
80#define URXD_PRERR (1<<10)
81#define UCR1_ADEN (1<<15) /* Auto detect interrupt */
82#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
83#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
84#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
85#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
86#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
87#define UCR1_IREN (1<<7) /* Infrared interface enable */
88#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
89#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
90#define UCR1_SNDBRK (1<<4) /* Send break */
91#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
92#define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */
93#define UCR1_DOZE (1<<1) /* Doze */
94#define UCR1_UARTEN (1<<0) /* UART enabled */
95#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
96#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
97#define UCR2_CTSC (1<<13) /* CTS pin control */
98#define UCR2_CTS (1<<12) /* Clear to send */
99#define UCR2_ESCEN (1<<11) /* Escape enable */
100#define UCR2_PREN (1<<8) /* Parity enable */
101#define UCR2_PROE (1<<7) /* Parity odd/even */
102#define UCR2_STPB (1<<6) /* Stop */
103#define UCR2_WS (1<<5) /* Word size */
104#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
105#define UCR2_TXEN (1<<2) /* Transmitter enabled */
106#define UCR2_RXEN (1<<1) /* Receiver enabled */
107#define UCR2_SRST (1<<0) /* SW reset */
108#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
109#define UCR3_PARERREN (1<<12) /* Parity enable */
110#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
111#define UCR3_DSR (1<<10) /* Data set ready */
112#define UCR3_DCD (1<<9) /* Data carrier detect */
113#define UCR3_RI (1<<8) /* Ring indicator */
114#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
115#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
116#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
117#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
118#define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */
119#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
120#define UCR3_BPEN (1<<0) /* Preset registers enable */
121#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
122#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */
123#define UCR4_INVR (1<<9) /* Inverted infrared reception */
124#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
125#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
126#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
127#define UCR4_IRSC (1<<5) /* IR special case */
128#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
129#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
130#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
131#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
132#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
133#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
134#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
135#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
136#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
137#define USR1_RTSS (1<<14) /* RTS pin status */
138#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
139#define USR1_RTSD (1<<12) /* RTS delta */
140#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
141#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
142#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
143#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
144#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
145#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
146#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
147#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
148#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
149#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
150#define USR2_IDLE (1<<12) /* Idle condition */
151#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
152#define USR2_WAKE (1<<7) /* Wake */
153#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
154#define USR2_TXDC (1<<3) /* Transmitter complete */
155#define USR2_BRCD (1<<2) /* Break condition */
156#define USR2_ORE (1<<1) /* Overrun error */
157#define USR2_RDR (1<<0) /* Recv data ready */
158#define UTS_FRCPERR (1<<13) /* Force parity error */
159#define UTS_LOOP (1<<12) /* Loop tx and rx */
160#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
161#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
162#define UTS_TXFULL (1<<4) /* TxFIFO full */
163#define UTS_RXFULL (1<<3) /* RxFIFO full */
164#define UTS_SOFTRST (1<<0) /* Software reset */
165
166/* We've been assigned a range on the "Low-density serial ports" major */
167#define SERIAL_IMX_MAJOR 207
168#define MINOR_START 16
169#define DEV_NAME "ttymxc"
170#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
171
172/*
173 * This determines how often we check the modem status signals
174 * for any change. They generally aren't connected to an IRQ
175 * so we have to poll them. We also check immediately before
176 * filling the TX fifo incase CTS has been dropped.
177 */
178#define MCTRL_TIMEOUT (250*HZ/1000)
179
180#define DRIVER_NAME "IMX-uart"
181
182#define UART_NR 8
183
184/* i.mx21 type uart runs on all i.mx except i.mx1 */
185enum imx_uart_type {
186 IMX1_UART,
187 IMX21_UART,
188};
189
190/* device type dependent stuff */
191struct imx_uart_data {
192 unsigned uts_reg;
193 enum imx_uart_type devtype;
194};
195
196struct imx_port {
197 struct uart_port port;
198 struct timer_list timer;
199 unsigned int old_status;
200 int txirq,rxirq,rtsirq;
201 unsigned int have_rtscts:1;
202 unsigned int use_irda:1;
203 unsigned int irda_inv_rx:1;
204 unsigned int irda_inv_tx:1;
205 unsigned short trcv_delay; /* transceiver delay */
206 struct clk *clk;
207 struct imx_uart_data *devdata;
208};
209
210#ifdef CONFIG_IRDA
211#define USE_IRDA(sport) ((sport)->use_irda)
212#else
213#define USE_IRDA(sport) (0)
214#endif
215
216static struct imx_uart_data imx_uart_devdata[] = {
217 [IMX1_UART] = {
218 .uts_reg = IMX1_UTS,
219 .devtype = IMX1_UART,
220 },
221 [IMX21_UART] = {
222 .uts_reg = IMX21_UTS,
223 .devtype = IMX21_UART,
224 },
225};
226
227static struct platform_device_id imx_uart_devtype[] = {
228 {
229 .name = "imx1-uart",
230 .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART],
231 }, {
232 .name = "imx21-uart",
233 .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART],
234 }, {
235 /* sentinel */
236 }
237};
238MODULE_DEVICE_TABLE(platform, imx_uart_devtype);
239
240static struct of_device_id imx_uart_dt_ids[] = {
241 { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
242 { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
243 { /* sentinel */ }
244};
245MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
246
247static inline unsigned uts_reg(struct imx_port *sport)
248{
249 return sport->devdata->uts_reg;
250}
251
252static inline int is_imx1_uart(struct imx_port *sport)
253{
254 return sport->devdata->devtype == IMX1_UART;
255}
256
257static inline int is_imx21_uart(struct imx_port *sport)
258{
259 return sport->devdata->devtype == IMX21_UART;
260}
261
262/*
263 * Handle any change of modem status signal since we were last called.
264 */
265static void imx_mctrl_check(struct imx_port *sport)
266{
267 unsigned int status, changed;
268
269 status = sport->port.ops->get_mctrl(&sport->port);
270 changed = status ^ sport->old_status;
271
272 if (changed == 0)
273 return;
274
275 sport->old_status = status;
276
277 if (changed & TIOCM_RI)
278 sport->port.icount.rng++;
279 if (changed & TIOCM_DSR)
280 sport->port.icount.dsr++;
281 if (changed & TIOCM_CAR)
282 uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
283 if (changed & TIOCM_CTS)
284 uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
285
286 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
287}
288
289/*
290 * This is our per-port timeout handler, for checking the
291 * modem status signals.
292 */
293static void imx_timeout(unsigned long data)
294{
295 struct imx_port *sport = (struct imx_port *)data;
296 unsigned long flags;
297
298 if (sport->port.state) {
299 spin_lock_irqsave(&sport->port.lock, flags);
300 imx_mctrl_check(sport);
301 spin_unlock_irqrestore(&sport->port.lock, flags);
302
303 mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
304 }
305}
306
307/*
308 * interrupts disabled on entry
309 */
310static void imx_stop_tx(struct uart_port *port)
311{
312 struct imx_port *sport = (struct imx_port *)port;
313 unsigned long temp;
314
315 if (USE_IRDA(sport)) {
316 /* half duplex - wait for end of transmission */
317 int n = 256;
318 while ((--n > 0) &&
319 !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
320 udelay(5);
321 barrier();
322 }
323 /*
324 * irda transceiver - wait a bit more to avoid
325 * cutoff, hardware dependent
326 */
327 udelay(sport->trcv_delay);
328
329 /*
330 * half duplex - reactivate receive mode,
331 * flush receive pipe echo crap
332 */
333 if (readl(sport->port.membase + USR2) & USR2_TXDC) {
334 temp = readl(sport->port.membase + UCR1);
335 temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
336 writel(temp, sport->port.membase + UCR1);
337
338 temp = readl(sport->port.membase + UCR4);
339 temp &= ~(UCR4_TCEN);
340 writel(temp, sport->port.membase + UCR4);
341
342 while (readl(sport->port.membase + URXD0) &
343 URXD_CHARRDY)
344 barrier();
345
346 temp = readl(sport->port.membase + UCR1);
347 temp |= UCR1_RRDYEN;
348 writel(temp, sport->port.membase + UCR1);
349
350 temp = readl(sport->port.membase + UCR4);
351 temp |= UCR4_DREN;
352 writel(temp, sport->port.membase + UCR4);
353 }
354 return;
355 }
356
357 temp = readl(sport->port.membase + UCR1);
358 writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
359}
360
361/*
362 * interrupts disabled on entry
363 */
364static void imx_stop_rx(struct uart_port *port)
365{
366 struct imx_port *sport = (struct imx_port *)port;
367 unsigned long temp;
368
369 temp = readl(sport->port.membase + UCR2);
370 writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2);
371}
372
373/*
374 * Set the modem control timer to fire immediately.
375 */
376static void imx_enable_ms(struct uart_port *port)
377{
378 struct imx_port *sport = (struct imx_port *)port;
379
380 mod_timer(&sport->timer, jiffies);
381}
382
383static inline void imx_transmit_buffer(struct imx_port *sport)
384{
385 struct circ_buf *xmit = &sport->port.state->xmit;
386
387 while (!uart_circ_empty(xmit) &&
388 !(readl(sport->port.membase + uts_reg(sport))
389 & UTS_TXFULL)) {
390 /* send xmit->buf[xmit->tail]
391 * out the port here */
392 writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
393 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
394 sport->port.icount.tx++;
395 }
396
397 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
398 uart_write_wakeup(&sport->port);
399
400 if (uart_circ_empty(xmit))
401 imx_stop_tx(&sport->port);
402}
403
404/*
405 * interrupts disabled on entry
406 */
407static void imx_start_tx(struct uart_port *port)
408{
409 struct imx_port *sport = (struct imx_port *)port;
410 unsigned long temp;
411
412 if (USE_IRDA(sport)) {
413 /* half duplex in IrDA mode; have to disable receive mode */
414 temp = readl(sport->port.membase + UCR4);
415 temp &= ~(UCR4_DREN);
416 writel(temp, sport->port.membase + UCR4);
417
418 temp = readl(sport->port.membase + UCR1);
419 temp &= ~(UCR1_RRDYEN);
420 writel(temp, sport->port.membase + UCR1);
421 }
422
423 temp = readl(sport->port.membase + UCR1);
424 writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
425
426 if (USE_IRDA(sport)) {
427 temp = readl(sport->port.membase + UCR1);
428 temp |= UCR1_TRDYEN;
429 writel(temp, sport->port.membase + UCR1);
430
431 temp = readl(sport->port.membase + UCR4);
432 temp |= UCR4_TCEN;
433 writel(temp, sport->port.membase + UCR4);
434 }
435
436 if (readl(sport->port.membase + uts_reg(sport)) & UTS_TXEMPTY)
437 imx_transmit_buffer(sport);
438}
439
440static irqreturn_t imx_rtsint(int irq, void *dev_id)
441{
442 struct imx_port *sport = dev_id;
443 unsigned int val;
444 unsigned long flags;
445
446 spin_lock_irqsave(&sport->port.lock, flags);
447
448 writel(USR1_RTSD, sport->port.membase + USR1);
449 val = readl(sport->port.membase + USR1) & USR1_RTSS;
450 uart_handle_cts_change(&sport->port, !!val);
451 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
452
453 spin_unlock_irqrestore(&sport->port.lock, flags);
454 return IRQ_HANDLED;
455}
456
457static irqreturn_t imx_txint(int irq, void *dev_id)
458{
459 struct imx_port *sport = dev_id;
460 struct circ_buf *xmit = &sport->port.state->xmit;
461 unsigned long flags;
462
463 spin_lock_irqsave(&sport->port.lock,flags);
464 if (sport->port.x_char)
465 {
466 /* Send next char */
467 writel(sport->port.x_char, sport->port.membase + URTX0);
468 goto out;
469 }
470
471 if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
472 imx_stop_tx(&sport->port);
473 goto out;
474 }
475
476 imx_transmit_buffer(sport);
477
478 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
479 uart_write_wakeup(&sport->port);
480
481out:
482 spin_unlock_irqrestore(&sport->port.lock,flags);
483 return IRQ_HANDLED;
484}
485
486static irqreturn_t imx_rxint(int irq, void *dev_id)
487{
488 struct imx_port *sport = dev_id;
489 unsigned int rx,flg,ignored = 0;
490 struct tty_struct *tty = sport->port.state->port.tty;
491 unsigned long flags, temp;
492
493 spin_lock_irqsave(&sport->port.lock,flags);
494
495 while (readl(sport->port.membase + USR2) & USR2_RDR) {
496 flg = TTY_NORMAL;
497 sport->port.icount.rx++;
498
499 rx = readl(sport->port.membase + URXD0);
500
501 temp = readl(sport->port.membase + USR2);
502 if (temp & USR2_BRCD) {
503 writel(USR2_BRCD, sport->port.membase + USR2);
504 if (uart_handle_break(&sport->port))
505 continue;
506 }
507
508 if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
509 continue;
510
511 if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
512 if (rx & URXD_PRERR)
513 sport->port.icount.parity++;
514 else if (rx & URXD_FRMERR)
515 sport->port.icount.frame++;
516 if (rx & URXD_OVRRUN)
517 sport->port.icount.overrun++;
518
519 if (rx & sport->port.ignore_status_mask) {
520 if (++ignored > 100)
521 goto out;
522 continue;
523 }
524
525 rx &= sport->port.read_status_mask;
526
527 if (rx & URXD_PRERR)
528 flg = TTY_PARITY;
529 else if (rx & URXD_FRMERR)
530 flg = TTY_FRAME;
531 if (rx & URXD_OVRRUN)
532 flg = TTY_OVERRUN;
533
534#ifdef SUPPORT_SYSRQ
535 sport->port.sysrq = 0;
536#endif
537 }
538
539 tty_insert_flip_char(tty, rx, flg);
540 }
541
542out:
543 spin_unlock_irqrestore(&sport->port.lock,flags);
544 tty_flip_buffer_push(tty);
545 return IRQ_HANDLED;
546}
547
548static irqreturn_t imx_int(int irq, void *dev_id)
549{
550 struct imx_port *sport = dev_id;
551 unsigned int sts;
552
553 sts = readl(sport->port.membase + USR1);
554
555 if (sts & USR1_RRDY)
556 imx_rxint(irq, dev_id);
557
558 if (sts & USR1_TRDY &&
559 readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
560 imx_txint(irq, dev_id);
561
562 if (sts & USR1_RTSD)
563 imx_rtsint(irq, dev_id);
564
565 return IRQ_HANDLED;
566}
567
568/*
569 * Return TIOCSER_TEMT when transmitter is not busy.
570 */
571static unsigned int imx_tx_empty(struct uart_port *port)
572{
573 struct imx_port *sport = (struct imx_port *)port;
574
575 return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
576}
577
578/*
579 * We have a modem side uart, so the meanings of RTS and CTS are inverted.
580 */
581static unsigned int imx_get_mctrl(struct uart_port *port)
582{
583 struct imx_port *sport = (struct imx_port *)port;
584 unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
585
586 if (readl(sport->port.membase + USR1) & USR1_RTSS)
587 tmp |= TIOCM_CTS;
588
589 if (readl(sport->port.membase + UCR2) & UCR2_CTS)
590 tmp |= TIOCM_RTS;
591
592 return tmp;
593}
594
595static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
596{
597 struct imx_port *sport = (struct imx_port *)port;
598 unsigned long temp;
599
600 temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
601
602 if (mctrl & TIOCM_RTS)
603 temp |= UCR2_CTS;
604
605 writel(temp, sport->port.membase + UCR2);
606}
607
608/*
609 * Interrupts always disabled.
610 */
611static void imx_break_ctl(struct uart_port *port, int break_state)
612{
613 struct imx_port *sport = (struct imx_port *)port;
614 unsigned long flags, temp;
615
616 spin_lock_irqsave(&sport->port.lock, flags);
617
618 temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK;
619
620 if ( break_state != 0 )
621 temp |= UCR1_SNDBRK;
622
623 writel(temp, sport->port.membase + UCR1);
624
625 spin_unlock_irqrestore(&sport->port.lock, flags);
626}
627
628#define TXTL 2 /* reset default */
629#define RXTL 1 /* reset default */
630
631static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
632{
633 unsigned int val;
634 unsigned int ufcr_rfdiv;
635
636 /* set receiver / transmitter trigger level.
637 * RFDIV is set such way to satisfy requested uartclk value
638 */
639 val = TXTL << 10 | RXTL;
640 ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
641 / sport->port.uartclk;
642
643 if(!ufcr_rfdiv)
644 ufcr_rfdiv = 1;
645
646 val |= UFCR_RFDIV_REG(ufcr_rfdiv);
647
648 writel(val, sport->port.membase + UFCR);
649
650 return 0;
651}
652
653/* half the RX buffer size */
654#define CTSTL 16
655
656static int imx_startup(struct uart_port *port)
657{
658 struct imx_port *sport = (struct imx_port *)port;
659 int retval;
660 unsigned long flags, temp;
661
662 imx_setup_ufcr(sport, 0);
663
664 /* disable the DREN bit (Data Ready interrupt enable) before
665 * requesting IRQs
666 */
667 temp = readl(sport->port.membase + UCR4);
668
669 if (USE_IRDA(sport))
670 temp |= UCR4_IRSC;
671
672 /* set the trigger level for CTS */
673 temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF);
674 temp |= CTSTL<< UCR4_CTSTL_SHF;
675
676 writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
677
678 if (USE_IRDA(sport)) {
679 /* reset fifo's and state machines */
680 int i = 100;
681 temp = readl(sport->port.membase + UCR2);
682 temp &= ~UCR2_SRST;
683 writel(temp, sport->port.membase + UCR2);
684 while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
685 (--i > 0)) {
686 udelay(1);
687 }
688 }
689
690 /*
691 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
692 * chips only have one interrupt.
693 */
694 if (sport->txirq > 0) {
695 retval = request_irq(sport->rxirq, imx_rxint, 0,
696 DRIVER_NAME, sport);
697 if (retval)
698 goto error_out1;
699
700 retval = request_irq(sport->txirq, imx_txint, 0,
701 DRIVER_NAME, sport);
702 if (retval)
703 goto error_out2;
704
705 /* do not use RTS IRQ on IrDA */
706 if (!USE_IRDA(sport)) {
707 retval = request_irq(sport->rtsirq, imx_rtsint,
708 (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
709 IRQF_TRIGGER_FALLING |
710 IRQF_TRIGGER_RISING,
711 DRIVER_NAME, sport);
712 if (retval)
713 goto error_out3;
714 }
715 } else {
716 retval = request_irq(sport->port.irq, imx_int, 0,
717 DRIVER_NAME, sport);
718 if (retval) {
719 free_irq(sport->port.irq, sport);
720 goto error_out1;
721 }
722 }
723
724 /*
725 * Finally, clear and enable interrupts
726 */
727 writel(USR1_RTSD, sport->port.membase + USR1);
728
729 temp = readl(sport->port.membase + UCR1);
730 temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
731
732 if (USE_IRDA(sport)) {
733 temp |= UCR1_IREN;
734 temp &= ~(UCR1_RTSDEN);
735 }
736
737 writel(temp, sport->port.membase + UCR1);
738
739 temp = readl(sport->port.membase + UCR2);
740 temp |= (UCR2_RXEN | UCR2_TXEN);
741 writel(temp, sport->port.membase + UCR2);
742
743 if (USE_IRDA(sport)) {
744 /* clear RX-FIFO */
745 int i = 64;
746 while ((--i > 0) &&
747 (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
748 barrier();
749 }
750 }
751
752 if (is_imx21_uart(sport)) {
753 temp = readl(sport->port.membase + UCR3);
754 temp |= IMX21_UCR3_RXDMUXSEL;
755 writel(temp, sport->port.membase + UCR3);
756 }
757
758 if (USE_IRDA(sport)) {
759 temp = readl(sport->port.membase + UCR4);
760 if (sport->irda_inv_rx)
761 temp |= UCR4_INVR;
762 else
763 temp &= ~(UCR4_INVR);
764 writel(temp | UCR4_DREN, sport->port.membase + UCR4);
765
766 temp = readl(sport->port.membase + UCR3);
767 if (sport->irda_inv_tx)
768 temp |= UCR3_INVT;
769 else
770 temp &= ~(UCR3_INVT);
771 writel(temp, sport->port.membase + UCR3);
772 }
773
774 /*
775 * Enable modem status interrupts
776 */
777 spin_lock_irqsave(&sport->port.lock,flags);
778 imx_enable_ms(&sport->port);
779 spin_unlock_irqrestore(&sport->port.lock,flags);
780
781 if (USE_IRDA(sport)) {
782 struct imxuart_platform_data *pdata;
783 pdata = sport->port.dev->platform_data;
784 sport->irda_inv_rx = pdata->irda_inv_rx;
785 sport->irda_inv_tx = pdata->irda_inv_tx;
786 sport->trcv_delay = pdata->transceiver_delay;
787 if (pdata->irda_enable)
788 pdata->irda_enable(1);
789 }
790
791 return 0;
792
793error_out3:
794 if (sport->txirq)
795 free_irq(sport->txirq, sport);
796error_out2:
797 if (sport->rxirq)
798 free_irq(sport->rxirq, sport);
799error_out1:
800 return retval;
801}
802
803static void imx_shutdown(struct uart_port *port)
804{
805 struct imx_port *sport = (struct imx_port *)port;
806 unsigned long temp;
807
808 temp = readl(sport->port.membase + UCR2);
809 temp &= ~(UCR2_TXEN);
810 writel(temp, sport->port.membase + UCR2);
811
812 if (USE_IRDA(sport)) {
813 struct imxuart_platform_data *pdata;
814 pdata = sport->port.dev->platform_data;
815 if (pdata->irda_enable)
816 pdata->irda_enable(0);
817 }
818
819 /*
820 * Stop our timer.
821 */
822 del_timer_sync(&sport->timer);
823
824 /*
825 * Free the interrupts
826 */
827 if (sport->txirq > 0) {
828 if (!USE_IRDA(sport))
829 free_irq(sport->rtsirq, sport);
830 free_irq(sport->txirq, sport);
831 free_irq(sport->rxirq, sport);
832 } else
833 free_irq(sport->port.irq, sport);
834
835 /*
836 * Disable all interrupts, port and break condition.
837 */
838
839 temp = readl(sport->port.membase + UCR1);
840 temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
841 if (USE_IRDA(sport))
842 temp &= ~(UCR1_IREN);
843
844 writel(temp, sport->port.membase + UCR1);
845}
846
847static void
848imx_set_termios(struct uart_port *port, struct ktermios *termios,
849 struct ktermios *old)
850{
851 struct imx_port *sport = (struct imx_port *)port;
852 unsigned long flags;
853 unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
854 unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
855 unsigned int div, ufcr;
856 unsigned long num, denom;
857 uint64_t tdiv64;
858
859 /*
860 * If we don't support modem control lines, don't allow
861 * these to be set.
862 */
863 if (0) {
864 termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
865 termios->c_cflag |= CLOCAL;
866 }
867
868 /*
869 * We only support CS7 and CS8.
870 */
871 while ((termios->c_cflag & CSIZE) != CS7 &&
872 (termios->c_cflag & CSIZE) != CS8) {
873 termios->c_cflag &= ~CSIZE;
874 termios->c_cflag |= old_csize;
875 old_csize = CS8;
876 }
877
878 if ((termios->c_cflag & CSIZE) == CS8)
879 ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
880 else
881 ucr2 = UCR2_SRST | UCR2_IRTS;
882
883 if (termios->c_cflag & CRTSCTS) {
884 if( sport->have_rtscts ) {
885 ucr2 &= ~UCR2_IRTS;
886 ucr2 |= UCR2_CTSC;
887 } else {
888 termios->c_cflag &= ~CRTSCTS;
889 }
890 }
891
892 if (termios->c_cflag & CSTOPB)
893 ucr2 |= UCR2_STPB;
894 if (termios->c_cflag & PARENB) {
895 ucr2 |= UCR2_PREN;
896 if (termios->c_cflag & PARODD)
897 ucr2 |= UCR2_PROE;
898 }
899
900 /*
901 * Ask the core to calculate the divisor for us.
902 */
903 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
904 quot = uart_get_divisor(port, baud);
905
906 spin_lock_irqsave(&sport->port.lock, flags);
907
908 sport->port.read_status_mask = 0;
909 if (termios->c_iflag & INPCK)
910 sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
911 if (termios->c_iflag & (BRKINT | PARMRK))
912 sport->port.read_status_mask |= URXD_BRK;
913
914 /*
915 * Characters to ignore
916 */
917 sport->port.ignore_status_mask = 0;
918 if (termios->c_iflag & IGNPAR)
919 sport->port.ignore_status_mask |= URXD_PRERR;
920 if (termios->c_iflag & IGNBRK) {
921 sport->port.ignore_status_mask |= URXD_BRK;
922 /*
923 * If we're ignoring parity and break indicators,
924 * ignore overruns too (for real raw support).
925 */
926 if (termios->c_iflag & IGNPAR)
927 sport->port.ignore_status_mask |= URXD_OVRRUN;
928 }
929
930 del_timer_sync(&sport->timer);
931
932 /*
933 * Update the per-port timeout.
934 */
935 uart_update_timeout(port, termios->c_cflag, baud);
936
937 /*
938 * disable interrupts and drain transmitter
939 */
940 old_ucr1 = readl(sport->port.membase + UCR1);
941 writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
942 sport->port.membase + UCR1);
943
944 while ( !(readl(sport->port.membase + USR2) & USR2_TXDC))
945 barrier();
946
947 /* then, disable everything */
948 old_txrxen = readl(sport->port.membase + UCR2);
949 writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN),
950 sport->port.membase + UCR2);
951 old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
952
953 if (USE_IRDA(sport)) {
954 /*
955 * use maximum available submodule frequency to
956 * avoid missing short pulses due to low sampling rate
957 */
958 div = 1;
959 } else {
960 div = sport->port.uartclk / (baud * 16);
961 if (div > 7)
962 div = 7;
963 if (!div)
964 div = 1;
965 }
966
967 rational_best_approximation(16 * div * baud, sport->port.uartclk,
968 1 << 16, 1 << 16, &num, &denom);
969
970 tdiv64 = sport->port.uartclk;
971 tdiv64 *= num;
972 do_div(tdiv64, denom * 16 * div);
973 tty_termios_encode_baud_rate(termios,
974 (speed_t)tdiv64, (speed_t)tdiv64);
975
976 num -= 1;
977 denom -= 1;
978
979 ufcr = readl(sport->port.membase + UFCR);
980 ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
981 writel(ufcr, sport->port.membase + UFCR);
982
983 writel(num, sport->port.membase + UBIR);
984 writel(denom, sport->port.membase + UBMR);
985
986 if (is_imx21_uart(sport))
987 writel(sport->port.uartclk / div / 1000,
988 sport->port.membase + IMX21_ONEMS);
989
990 writel(old_ucr1, sport->port.membase + UCR1);
991
992 /* set the parity, stop bits and data size */
993 writel(ucr2 | old_txrxen, sport->port.membase + UCR2);
994
995 if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
996 imx_enable_ms(&sport->port);
997
998 spin_unlock_irqrestore(&sport->port.lock, flags);
999}
1000
1001static const char *imx_type(struct uart_port *port)
1002{
1003 struct imx_port *sport = (struct imx_port *)port;
1004
1005 return sport->port.type == PORT_IMX ? "IMX" : NULL;
1006}
1007
1008/*
1009 * Release the memory region(s) being used by 'port'.
1010 */
1011static void imx_release_port(struct uart_port *port)
1012{
1013 struct platform_device *pdev = to_platform_device(port->dev);
1014 struct resource *mmres;
1015
1016 mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1017 release_mem_region(mmres->start, resource_size(mmres));
1018}
1019
1020/*
1021 * Request the memory region(s) being used by 'port'.
1022 */
1023static int imx_request_port(struct uart_port *port)
1024{
1025 struct platform_device *pdev = to_platform_device(port->dev);
1026 struct resource *mmres;
1027 void *ret;
1028
1029 mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1030 if (!mmres)
1031 return -ENODEV;
1032
1033 ret = request_mem_region(mmres->start, resource_size(mmres), "imx-uart");
1034
1035 return ret ? 0 : -EBUSY;
1036}
1037
1038/*
1039 * Configure/autoconfigure the port.
1040 */
1041static void imx_config_port(struct uart_port *port, int flags)
1042{
1043 struct imx_port *sport = (struct imx_port *)port;
1044
1045 if (flags & UART_CONFIG_TYPE &&
1046 imx_request_port(&sport->port) == 0)
1047 sport->port.type = PORT_IMX;
1048}
1049
1050/*
1051 * Verify the new serial_struct (for TIOCSSERIAL).
1052 * The only change we allow are to the flags and type, and
1053 * even then only between PORT_IMX and PORT_UNKNOWN
1054 */
1055static int
1056imx_verify_port(struct uart_port *port, struct serial_struct *ser)
1057{
1058 struct imx_port *sport = (struct imx_port *)port;
1059 int ret = 0;
1060
1061 if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
1062 ret = -EINVAL;
1063 if (sport->port.irq != ser->irq)
1064 ret = -EINVAL;
1065 if (ser->io_type != UPIO_MEM)
1066 ret = -EINVAL;
1067 if (sport->port.uartclk / 16 != ser->baud_base)
1068 ret = -EINVAL;
1069 if ((void *)sport->port.mapbase != ser->iomem_base)
1070 ret = -EINVAL;
1071 if (sport->port.iobase != ser->port)
1072 ret = -EINVAL;
1073 if (ser->hub6 != 0)
1074 ret = -EINVAL;
1075 return ret;
1076}
1077
1078static struct uart_ops imx_pops = {
1079 .tx_empty = imx_tx_empty,
1080 .set_mctrl = imx_set_mctrl,
1081 .get_mctrl = imx_get_mctrl,
1082 .stop_tx = imx_stop_tx,
1083 .start_tx = imx_start_tx,
1084 .stop_rx = imx_stop_rx,
1085 .enable_ms = imx_enable_ms,
1086 .break_ctl = imx_break_ctl,
1087 .startup = imx_startup,
1088 .shutdown = imx_shutdown,
1089 .set_termios = imx_set_termios,
1090 .type = imx_type,
1091 .release_port = imx_release_port,
1092 .request_port = imx_request_port,
1093 .config_port = imx_config_port,
1094 .verify_port = imx_verify_port,
1095};
1096
1097static struct imx_port *imx_ports[UART_NR];
1098
1099#ifdef CONFIG_SERIAL_IMX_CONSOLE
1100static void imx_console_putchar(struct uart_port *port, int ch)
1101{
1102 struct imx_port *sport = (struct imx_port *)port;
1103
1104 while (readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)
1105 barrier();
1106
1107 writel(ch, sport->port.membase + URTX0);
1108}
1109
1110/*
1111 * Interrupts are disabled on entering
1112 */
1113static void
1114imx_console_write(struct console *co, const char *s, unsigned int count)
1115{
1116 struct imx_port *sport = imx_ports[co->index];
1117 unsigned int old_ucr1, old_ucr2, ucr1;
1118
1119 /*
1120 * First, save UCR1/2 and then disable interrupts
1121 */
1122 ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
1123 old_ucr2 = readl(sport->port.membase + UCR2);
1124
1125 if (is_imx1_uart(sport))
1126 ucr1 |= IMX1_UCR1_UARTCLKEN;
1127 ucr1 |= UCR1_UARTEN;
1128 ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
1129
1130 writel(ucr1, sport->port.membase + UCR1);
1131
1132 writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
1133
1134 uart_console_write(&sport->port, s, count, imx_console_putchar);
1135
1136 /*
1137 * Finally, wait for transmitter to become empty
1138 * and restore UCR1/2
1139 */
1140 while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
1141
1142 writel(old_ucr1, sport->port.membase + UCR1);
1143 writel(old_ucr2, sport->port.membase + UCR2);
1144}
1145
1146/*
1147 * If the port was already initialised (eg, by a boot loader),
1148 * try to determine the current setup.
1149 */
1150static void __init
1151imx_console_get_options(struct imx_port *sport, int *baud,
1152 int *parity, int *bits)
1153{
1154
1155 if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
1156 /* ok, the port was enabled */
1157 unsigned int ucr2, ubir,ubmr, uartclk;
1158 unsigned int baud_raw;
1159 unsigned int ucfr_rfdiv;
1160
1161 ucr2 = readl(sport->port.membase + UCR2);
1162
1163 *parity = 'n';
1164 if (ucr2 & UCR2_PREN) {
1165 if (ucr2 & UCR2_PROE)
1166 *parity = 'o';
1167 else
1168 *parity = 'e';
1169 }
1170
1171 if (ucr2 & UCR2_WS)
1172 *bits = 8;
1173 else
1174 *bits = 7;
1175
1176 ubir = readl(sport->port.membase + UBIR) & 0xffff;
1177 ubmr = readl(sport->port.membase + UBMR) & 0xffff;
1178
1179 ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7;
1180 if (ucfr_rfdiv == 6)
1181 ucfr_rfdiv = 7;
1182 else
1183 ucfr_rfdiv = 6 - ucfr_rfdiv;
1184
1185 uartclk = clk_get_rate(sport->clk);
1186 uartclk /= ucfr_rfdiv;
1187
1188 { /*
1189 * The next code provides exact computation of
1190 * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
1191 * without need of float support or long long division,
1192 * which would be required to prevent 32bit arithmetic overflow
1193 */
1194 unsigned int mul = ubir + 1;
1195 unsigned int div = 16 * (ubmr + 1);
1196 unsigned int rem = uartclk % div;
1197
1198 baud_raw = (uartclk / div) * mul;
1199 baud_raw += (rem * mul + div / 2) / div;
1200 *baud = (baud_raw + 50) / 100 * 100;
1201 }
1202
1203 if(*baud != baud_raw)
1204 printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n",
1205 baud_raw, *baud);
1206 }
1207}
1208
1209static int __init
1210imx_console_setup(struct console *co, char *options)
1211{
1212 struct imx_port *sport;
1213 int baud = 9600;
1214 int bits = 8;
1215 int parity = 'n';
1216 int flow = 'n';
1217
1218 /*
1219 * Check whether an invalid uart number has been specified, and
1220 * if so, search for the first available port that does have
1221 * console support.
1222 */
1223 if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
1224 co->index = 0;
1225 sport = imx_ports[co->index];
1226 if(sport == NULL)
1227 return -ENODEV;
1228
1229 if (options)
1230 uart_parse_options(options, &baud, &parity, &bits, &flow);
1231 else
1232 imx_console_get_options(sport, &baud, &parity, &bits);
1233
1234 imx_setup_ufcr(sport, 0);
1235
1236 return uart_set_options(&sport->port, co, baud, parity, bits, flow);
1237}
1238
1239static struct uart_driver imx_reg;
1240static struct console imx_console = {
1241 .name = DEV_NAME,
1242 .write = imx_console_write,
1243 .device = uart_console_device,
1244 .setup = imx_console_setup,
1245 .flags = CON_PRINTBUFFER,
1246 .index = -1,
1247 .data = &imx_reg,
1248};
1249
1250#define IMX_CONSOLE &imx_console
1251#else
1252#define IMX_CONSOLE NULL
1253#endif
1254
1255static struct uart_driver imx_reg = {
1256 .owner = THIS_MODULE,
1257 .driver_name = DRIVER_NAME,
1258 .dev_name = DEV_NAME,
1259 .major = SERIAL_IMX_MAJOR,
1260 .minor = MINOR_START,
1261 .nr = ARRAY_SIZE(imx_ports),
1262 .cons = IMX_CONSOLE,
1263};
1264
1265static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
1266{
1267 struct imx_port *sport = platform_get_drvdata(dev);
1268
1269 if (sport)
1270 uart_suspend_port(&imx_reg, &sport->port);
1271
1272 return 0;
1273}
1274
1275static int serial_imx_resume(struct platform_device *dev)
1276{
1277 struct imx_port *sport = platform_get_drvdata(dev);
1278
1279 if (sport)
1280 uart_resume_port(&imx_reg, &sport->port);
1281
1282 return 0;
1283}
1284
1285#ifdef CONFIG_OF
1286static int serial_imx_probe_dt(struct imx_port *sport,
1287 struct platform_device *pdev)
1288{
1289 static int portnum = 0;
1290 struct device_node *np = pdev->dev.of_node;
1291 const struct of_device_id *of_id =
1292 of_match_device(imx_uart_dt_ids, &pdev->dev);
1293
1294 if (!np)
1295 return -ENODEV;
1296
1297 sport->port.line = portnum++;
1298 if (sport->port.line >= UART_NR)
1299 return -EINVAL;
1300
1301 if (of_get_property(np, "fsl,uart-has-rtscts", NULL))
1302 sport->have_rtscts = 1;
1303
1304 if (of_get_property(np, "fsl,irda-mode", NULL))
1305 sport->use_irda = 1;
1306
1307 sport->devdata = of_id->data;
1308
1309 return 0;
1310}
1311#else
1312static inline int serial_imx_probe_dt(struct imx_port *sport,
1313 struct platform_device *pdev)
1314{
1315 return -ENODEV;
1316}
1317#endif
1318
1319static void serial_imx_probe_pdata(struct imx_port *sport,
1320 struct platform_device *pdev)
1321{
1322 struct imxuart_platform_data *pdata = pdev->dev.platform_data;
1323
1324 sport->port.line = pdev->id;
1325 sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data;
1326
1327 if (!pdata)
1328 return;
1329
1330 if (pdata->flags & IMXUART_HAVE_RTSCTS)
1331 sport->have_rtscts = 1;
1332
1333 if (pdata->flags & IMXUART_IRDA)
1334 sport->use_irda = 1;
1335}
1336
1337static int serial_imx_probe(struct platform_device *pdev)
1338{
1339 struct imx_port *sport;
1340 struct imxuart_platform_data *pdata;
1341 void __iomem *base;
1342 int ret = 0;
1343 struct resource *res;
1344
1345 sport = kzalloc(sizeof(*sport), GFP_KERNEL);
1346 if (!sport)
1347 return -ENOMEM;
1348
1349 ret = serial_imx_probe_dt(sport, pdev);
1350 if (ret == -ENODEV)
1351 serial_imx_probe_pdata(sport, pdev);
1352
1353 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1354 if (!res) {
1355 ret = -ENODEV;
1356 goto free;
1357 }
1358
1359 base = ioremap(res->start, PAGE_SIZE);
1360 if (!base) {
1361 ret = -ENOMEM;
1362 goto free;
1363 }
1364
1365 sport->port.dev = &pdev->dev;
1366 sport->port.mapbase = res->start;
1367 sport->port.membase = base;
1368 sport->port.type = PORT_IMX,
1369 sport->port.iotype = UPIO_MEM;
1370 sport->port.irq = platform_get_irq(pdev, 0);
1371 sport->rxirq = platform_get_irq(pdev, 0);
1372 sport->txirq = platform_get_irq(pdev, 1);
1373 sport->rtsirq = platform_get_irq(pdev, 2);
1374 sport->port.fifosize = 32;
1375 sport->port.ops = &imx_pops;
1376 sport->port.flags = UPF_BOOT_AUTOCONF;
1377 init_timer(&sport->timer);
1378 sport->timer.function = imx_timeout;
1379 sport->timer.data = (unsigned long)sport;
1380
1381 sport->clk = clk_get(&pdev->dev, "uart");
1382 if (IS_ERR(sport->clk)) {
1383 ret = PTR_ERR(sport->clk);
1384 goto unmap;
1385 }
1386 clk_enable(sport->clk);
1387
1388 sport->port.uartclk = clk_get_rate(sport->clk);
1389
1390 imx_ports[sport->port.line] = sport;
1391
1392 pdata = pdev->dev.platform_data;
1393 if (pdata && pdata->init) {
1394 ret = pdata->init(pdev);
1395 if (ret)
1396 goto clkput;
1397 }
1398
1399 ret = uart_add_one_port(&imx_reg, &sport->port);
1400 if (ret)
1401 goto deinit;
1402 platform_set_drvdata(pdev, &sport->port);
1403
1404 return 0;
1405deinit:
1406 if (pdata && pdata->exit)
1407 pdata->exit(pdev);
1408clkput:
1409 clk_put(sport->clk);
1410 clk_disable(sport->clk);
1411unmap:
1412 iounmap(sport->port.membase);
1413free:
1414 kfree(sport);
1415
1416 return ret;
1417}
1418
1419static int serial_imx_remove(struct platform_device *pdev)
1420{
1421 struct imxuart_platform_data *pdata;
1422 struct imx_port *sport = platform_get_drvdata(pdev);
1423
1424 pdata = pdev->dev.platform_data;
1425
1426 platform_set_drvdata(pdev, NULL);
1427
1428 if (sport) {
1429 uart_remove_one_port(&imx_reg, &sport->port);
1430 clk_put(sport->clk);
1431 }
1432
1433 clk_disable(sport->clk);
1434
1435 if (pdata && pdata->exit)
1436 pdata->exit(pdev);
1437
1438 iounmap(sport->port.membase);
1439 kfree(sport);
1440
1441 return 0;
1442}
1443
1444static struct platform_driver serial_imx_driver = {
1445 .probe = serial_imx_probe,
1446 .remove = serial_imx_remove,
1447
1448 .suspend = serial_imx_suspend,
1449 .resume = serial_imx_resume,
1450 .id_table = imx_uart_devtype,
1451 .driver = {
1452 .name = "imx-uart",
1453 .owner = THIS_MODULE,
1454 .of_match_table = imx_uart_dt_ids,
1455 },
1456};
1457
1458static int __init imx_serial_init(void)
1459{
1460 int ret;
1461
1462 printk(KERN_INFO "Serial: IMX driver\n");
1463
1464 ret = uart_register_driver(&imx_reg);
1465 if (ret)
1466 return ret;
1467
1468 ret = platform_driver_register(&serial_imx_driver);
1469 if (ret != 0)
1470 uart_unregister_driver(&imx_reg);
1471
1472 return 0;
1473}
1474
1475static void __exit imx_serial_exit(void)
1476{
1477 platform_driver_unregister(&serial_imx_driver);
1478 uart_unregister_driver(&imx_reg);
1479}
1480
1481module_init(imx_serial_init);
1482module_exit(imx_serial_exit);
1483
1484MODULE_AUTHOR("Sascha Hauer");
1485MODULE_DESCRIPTION("IMX generic serial port driver");
1486MODULE_LICENSE("GPL");
1487MODULE_ALIAS("platform:imx-uart");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Driver for Motorola/Freescale IMX serial ports
4 *
5 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
6 *
7 * Author: Sascha Hauer <sascha@saschahauer.de>
8 * Copyright (C) 2004 Pengutronix
9 */
10
11#include <linux/module.h>
12#include <linux/ioport.h>
13#include <linux/init.h>
14#include <linux/console.h>
15#include <linux/sysrq.h>
16#include <linux/platform_device.h>
17#include <linux/tty.h>
18#include <linux/tty_flip.h>
19#include <linux/serial_core.h>
20#include <linux/serial.h>
21#include <linux/clk.h>
22#include <linux/delay.h>
23#include <linux/ktime.h>
24#include <linux/pinctrl/consumer.h>
25#include <linux/rational.h>
26#include <linux/slab.h>
27#include <linux/of.h>
28#include <linux/of_device.h>
29#include <linux/io.h>
30#include <linux/dma-mapping.h>
31
32#include <asm/irq.h>
33#include <linux/dma/imx-dma.h>
34
35#include "serial_mctrl_gpio.h"
36
37/* Register definitions */
38#define URXD0 0x0 /* Receiver Register */
39#define URTX0 0x40 /* Transmitter Register */
40#define UCR1 0x80 /* Control Register 1 */
41#define UCR2 0x84 /* Control Register 2 */
42#define UCR3 0x88 /* Control Register 3 */
43#define UCR4 0x8c /* Control Register 4 */
44#define UFCR 0x90 /* FIFO Control Register */
45#define USR1 0x94 /* Status Register 1 */
46#define USR2 0x98 /* Status Register 2 */
47#define UESC 0x9c /* Escape Character Register */
48#define UTIM 0xa0 /* Escape Timer Register */
49#define UBIR 0xa4 /* BRM Incremental Register */
50#define UBMR 0xa8 /* BRM Modulator Register */
51#define UBRC 0xac /* Baud Rate Count Register */
52#define IMX21_ONEMS 0xb0 /* One Millisecond register */
53#define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */
54#define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/
55
56/* UART Control Register Bit Fields.*/
57#define URXD_DUMMY_READ (1<<16)
58#define URXD_CHARRDY (1<<15)
59#define URXD_ERR (1<<14)
60#define URXD_OVRRUN (1<<13)
61#define URXD_FRMERR (1<<12)
62#define URXD_BRK (1<<11)
63#define URXD_PRERR (1<<10)
64#define URXD_RX_DATA (0xFF<<0)
65#define UCR1_ADEN (1<<15) /* Auto detect interrupt */
66#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
67#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
68#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
69#define UCR1_ICD_REG(x) (((x) & 3) << 10) /* idle condition detect */
70#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
71#define UCR1_RXDMAEN (1<<8) /* Recv ready DMA enable */
72#define UCR1_IREN (1<<7) /* Infrared interface enable */
73#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
74#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
75#define UCR1_SNDBRK (1<<4) /* Send break */
76#define UCR1_TXDMAEN (1<<3) /* Transmitter ready DMA enable */
77#define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */
78#define UCR1_ATDMAEN (1<<2) /* Aging DMA Timer Enable */
79#define UCR1_DOZE (1<<1) /* Doze */
80#define UCR1_UARTEN (1<<0) /* UART enabled */
81#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
82#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
83#define UCR2_CTSC (1<<13) /* CTS pin control */
84#define UCR2_CTS (1<<12) /* Clear to send */
85#define UCR2_ESCEN (1<<11) /* Escape enable */
86#define UCR2_PREN (1<<8) /* Parity enable */
87#define UCR2_PROE (1<<7) /* Parity odd/even */
88#define UCR2_STPB (1<<6) /* Stop */
89#define UCR2_WS (1<<5) /* Word size */
90#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
91#define UCR2_ATEN (1<<3) /* Aging Timer Enable */
92#define UCR2_TXEN (1<<2) /* Transmitter enabled */
93#define UCR2_RXEN (1<<1) /* Receiver enabled */
94#define UCR2_SRST (1<<0) /* SW reset */
95#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
96#define UCR3_PARERREN (1<<12) /* Parity enable */
97#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
98#define UCR3_DSR (1<<10) /* Data set ready */
99#define UCR3_DCD (1<<9) /* Data carrier detect */
100#define UCR3_RI (1<<8) /* Ring indicator */
101#define UCR3_ADNIMP (1<<7) /* Autobaud Detection Not Improved */
102#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
103#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
104#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
105#define UCR3_DTRDEN (1<<3) /* Data Terminal Ready Delta Enable. */
106#define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */
107#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
108#define UCR3_BPEN (1<<0) /* Preset registers enable */
109#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
110#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */
111#define UCR4_INVR (1<<9) /* Inverted infrared reception */
112#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
113#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
114#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
115#define UCR4_IDDMAEN (1<<6) /* DMA IDLE Condition Detected */
116#define UCR4_IRSC (1<<5) /* IR special case */
117#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
118#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
119#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
120#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
121#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
122#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */
123#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
124#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
125#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
126#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
127#define USR1_RTSS (1<<14) /* RTS pin status */
128#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
129#define USR1_RTSD (1<<12) /* RTS delta */
130#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
131#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
132#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
133#define USR1_AGTIM (1<<8) /* Ageing timer interrupt flag */
134#define USR1_DTRD (1<<7) /* DTR Delta */
135#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
136#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
137#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
138#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
139#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
140#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
141#define USR2_IDLE (1<<12) /* Idle condition */
142#define USR2_RIDELT (1<<10) /* Ring Interrupt Delta */
143#define USR2_RIIN (1<<9) /* Ring Indicator Input */
144#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
145#define USR2_WAKE (1<<7) /* Wake */
146#define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */
147#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
148#define USR2_TXDC (1<<3) /* Transmitter complete */
149#define USR2_BRCD (1<<2) /* Break condition */
150#define USR2_ORE (1<<1) /* Overrun error */
151#define USR2_RDR (1<<0) /* Recv data ready */
152#define UTS_FRCPERR (1<<13) /* Force parity error */
153#define UTS_LOOP (1<<12) /* Loop tx and rx */
154#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
155#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
156#define UTS_TXFULL (1<<4) /* TxFIFO full */
157#define UTS_RXFULL (1<<3) /* RxFIFO full */
158#define UTS_SOFTRST (1<<0) /* Software reset */
159
160/* We've been assigned a range on the "Low-density serial ports" major */
161#define SERIAL_IMX_MAJOR 207
162#define MINOR_START 16
163#define DEV_NAME "ttymxc"
164
165/*
166 * This determines how often we check the modem status signals
167 * for any change. They generally aren't connected to an IRQ
168 * so we have to poll them. We also check immediately before
169 * filling the TX fifo incase CTS has been dropped.
170 */
171#define MCTRL_TIMEOUT (250*HZ/1000)
172
173#define DRIVER_NAME "IMX-uart"
174
175#define UART_NR 8
176
177/* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */
178enum imx_uart_type {
179 IMX1_UART,
180 IMX21_UART,
181 IMX53_UART,
182 IMX6Q_UART,
183};
184
185/* device type dependent stuff */
186struct imx_uart_data {
187 unsigned uts_reg;
188 enum imx_uart_type devtype;
189};
190
191enum imx_tx_state {
192 OFF,
193 WAIT_AFTER_RTS,
194 SEND,
195 WAIT_AFTER_SEND,
196};
197
198struct imx_port {
199 struct uart_port port;
200 struct timer_list timer;
201 unsigned int old_status;
202 unsigned int have_rtscts:1;
203 unsigned int have_rtsgpio:1;
204 unsigned int dte_mode:1;
205 unsigned int inverted_tx:1;
206 unsigned int inverted_rx:1;
207 struct clk *clk_ipg;
208 struct clk *clk_per;
209 const struct imx_uart_data *devdata;
210
211 struct mctrl_gpios *gpios;
212
213 /* shadow registers */
214 unsigned int ucr1;
215 unsigned int ucr2;
216 unsigned int ucr3;
217 unsigned int ucr4;
218 unsigned int ufcr;
219
220 /* DMA fields */
221 unsigned int dma_is_enabled:1;
222 unsigned int dma_is_rxing:1;
223 unsigned int dma_is_txing:1;
224 struct dma_chan *dma_chan_rx, *dma_chan_tx;
225 struct scatterlist rx_sgl, tx_sgl[2];
226 void *rx_buf;
227 struct circ_buf rx_ring;
228 unsigned int rx_buf_size;
229 unsigned int rx_period_length;
230 unsigned int rx_periods;
231 dma_cookie_t rx_cookie;
232 unsigned int tx_bytes;
233 unsigned int dma_tx_nents;
234 unsigned int saved_reg[10];
235 bool context_saved;
236
237 enum imx_tx_state tx_state;
238 struct hrtimer trigger_start_tx;
239 struct hrtimer trigger_stop_tx;
240};
241
242struct imx_port_ucrs {
243 unsigned int ucr1;
244 unsigned int ucr2;
245 unsigned int ucr3;
246};
247
248static struct imx_uart_data imx_uart_devdata[] = {
249 [IMX1_UART] = {
250 .uts_reg = IMX1_UTS,
251 .devtype = IMX1_UART,
252 },
253 [IMX21_UART] = {
254 .uts_reg = IMX21_UTS,
255 .devtype = IMX21_UART,
256 },
257 [IMX53_UART] = {
258 .uts_reg = IMX21_UTS,
259 .devtype = IMX53_UART,
260 },
261 [IMX6Q_UART] = {
262 .uts_reg = IMX21_UTS,
263 .devtype = IMX6Q_UART,
264 },
265};
266
267static const struct of_device_id imx_uart_dt_ids[] = {
268 { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
269 { .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], },
270 { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
271 { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
272 { /* sentinel */ }
273};
274MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
275
276static void imx_uart_writel(struct imx_port *sport, u32 val, u32 offset)
277{
278 switch (offset) {
279 case UCR1:
280 sport->ucr1 = val;
281 break;
282 case UCR2:
283 sport->ucr2 = val;
284 break;
285 case UCR3:
286 sport->ucr3 = val;
287 break;
288 case UCR4:
289 sport->ucr4 = val;
290 break;
291 case UFCR:
292 sport->ufcr = val;
293 break;
294 default:
295 break;
296 }
297 writel(val, sport->port.membase + offset);
298}
299
300static u32 imx_uart_readl(struct imx_port *sport, u32 offset)
301{
302 switch (offset) {
303 case UCR1:
304 return sport->ucr1;
305 break;
306 case UCR2:
307 /*
308 * UCR2_SRST is the only bit in the cached registers that might
309 * differ from the value that was last written. As it only
310 * automatically becomes one after being cleared, reread
311 * conditionally.
312 */
313 if (!(sport->ucr2 & UCR2_SRST))
314 sport->ucr2 = readl(sport->port.membase + offset);
315 return sport->ucr2;
316 break;
317 case UCR3:
318 return sport->ucr3;
319 break;
320 case UCR4:
321 return sport->ucr4;
322 break;
323 case UFCR:
324 return sport->ufcr;
325 break;
326 default:
327 return readl(sport->port.membase + offset);
328 }
329}
330
331static inline unsigned imx_uart_uts_reg(struct imx_port *sport)
332{
333 return sport->devdata->uts_reg;
334}
335
336static inline int imx_uart_is_imx1(struct imx_port *sport)
337{
338 return sport->devdata->devtype == IMX1_UART;
339}
340
341static inline int imx_uart_is_imx21(struct imx_port *sport)
342{
343 return sport->devdata->devtype == IMX21_UART;
344}
345
346static inline int imx_uart_is_imx53(struct imx_port *sport)
347{
348 return sport->devdata->devtype == IMX53_UART;
349}
350
351static inline int imx_uart_is_imx6q(struct imx_port *sport)
352{
353 return sport->devdata->devtype == IMX6Q_UART;
354}
355/*
356 * Save and restore functions for UCR1, UCR2 and UCR3 registers
357 */
358#if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE)
359static void imx_uart_ucrs_save(struct imx_port *sport,
360 struct imx_port_ucrs *ucr)
361{
362 /* save control registers */
363 ucr->ucr1 = imx_uart_readl(sport, UCR1);
364 ucr->ucr2 = imx_uart_readl(sport, UCR2);
365 ucr->ucr3 = imx_uart_readl(sport, UCR3);
366}
367
368static void imx_uart_ucrs_restore(struct imx_port *sport,
369 struct imx_port_ucrs *ucr)
370{
371 /* restore control registers */
372 imx_uart_writel(sport, ucr->ucr1, UCR1);
373 imx_uart_writel(sport, ucr->ucr2, UCR2);
374 imx_uart_writel(sport, ucr->ucr3, UCR3);
375}
376#endif
377
378/* called with port.lock taken and irqs caller dependent */
379static void imx_uart_rts_active(struct imx_port *sport, u32 *ucr2)
380{
381 *ucr2 &= ~(UCR2_CTSC | UCR2_CTS);
382
383 mctrl_gpio_set(sport->gpios, sport->port.mctrl | TIOCM_RTS);
384}
385
386/* called with port.lock taken and irqs caller dependent */
387static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2)
388{
389 *ucr2 &= ~UCR2_CTSC;
390 *ucr2 |= UCR2_CTS;
391
392 mctrl_gpio_set(sport->gpios, sport->port.mctrl & ~TIOCM_RTS);
393}
394
395static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec)
396{
397 hrtimer_start(hrt, ms_to_ktime(msec), HRTIMER_MODE_REL);
398}
399
400/* called with port.lock taken and irqs off */
401static void imx_uart_start_rx(struct uart_port *port)
402{
403 struct imx_port *sport = (struct imx_port *)port;
404 unsigned int ucr1, ucr2;
405
406 ucr1 = imx_uart_readl(sport, UCR1);
407 ucr2 = imx_uart_readl(sport, UCR2);
408
409 ucr2 |= UCR2_RXEN;
410
411 if (sport->dma_is_enabled) {
412 ucr1 |= UCR1_RXDMAEN | UCR1_ATDMAEN;
413 } else {
414 ucr1 |= UCR1_RRDYEN;
415 ucr2 |= UCR2_ATEN;
416 }
417
418 /* Write UCR2 first as it includes RXEN */
419 imx_uart_writel(sport, ucr2, UCR2);
420 imx_uart_writel(sport, ucr1, UCR1);
421}
422
423/* called with port.lock taken and irqs off */
424static void imx_uart_stop_tx(struct uart_port *port)
425{
426 struct imx_port *sport = (struct imx_port *)port;
427 u32 ucr1, ucr4, usr2;
428
429 if (sport->tx_state == OFF)
430 return;
431
432 /*
433 * We are maybe in the SMP context, so if the DMA TX thread is running
434 * on other cpu, we have to wait for it to finish.
435 */
436 if (sport->dma_is_txing)
437 return;
438
439 ucr1 = imx_uart_readl(sport, UCR1);
440 imx_uart_writel(sport, ucr1 & ~UCR1_TRDYEN, UCR1);
441
442 usr2 = imx_uart_readl(sport, USR2);
443 if (!(usr2 & USR2_TXDC)) {
444 /* The shifter is still busy, so retry once TC triggers */
445 return;
446 }
447
448 ucr4 = imx_uart_readl(sport, UCR4);
449 ucr4 &= ~UCR4_TCEN;
450 imx_uart_writel(sport, ucr4, UCR4);
451
452 /* in rs485 mode disable transmitter */
453 if (port->rs485.flags & SER_RS485_ENABLED) {
454 if (sport->tx_state == SEND) {
455 sport->tx_state = WAIT_AFTER_SEND;
456
457 if (port->rs485.delay_rts_after_send > 0) {
458 start_hrtimer_ms(&sport->trigger_stop_tx,
459 port->rs485.delay_rts_after_send);
460 return;
461 }
462
463 /* continue without any delay */
464 }
465
466 if (sport->tx_state == WAIT_AFTER_RTS ||
467 sport->tx_state == WAIT_AFTER_SEND) {
468 u32 ucr2;
469
470 hrtimer_try_to_cancel(&sport->trigger_start_tx);
471
472 ucr2 = imx_uart_readl(sport, UCR2);
473 if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
474 imx_uart_rts_active(sport, &ucr2);
475 else
476 imx_uart_rts_inactive(sport, &ucr2);
477 imx_uart_writel(sport, ucr2, UCR2);
478
479 imx_uart_start_rx(port);
480
481 sport->tx_state = OFF;
482 }
483 } else {
484 sport->tx_state = OFF;
485 }
486}
487
488/* called with port.lock taken and irqs off */
489static void imx_uart_stop_rx(struct uart_port *port)
490{
491 struct imx_port *sport = (struct imx_port *)port;
492 u32 ucr1, ucr2, ucr4, uts;
493
494 ucr1 = imx_uart_readl(sport, UCR1);
495 ucr2 = imx_uart_readl(sport, UCR2);
496 ucr4 = imx_uart_readl(sport, UCR4);
497
498 if (sport->dma_is_enabled) {
499 ucr1 &= ~(UCR1_RXDMAEN | UCR1_ATDMAEN);
500 } else {
501 ucr1 &= ~UCR1_RRDYEN;
502 ucr2 &= ~UCR2_ATEN;
503 ucr4 &= ~UCR4_OREN;
504 }
505 imx_uart_writel(sport, ucr1, UCR1);
506 imx_uart_writel(sport, ucr4, UCR4);
507
508 /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
509 if (port->rs485.flags & SER_RS485_ENABLED &&
510 port->rs485.flags & SER_RS485_RTS_ON_SEND &&
511 sport->have_rtscts && !sport->have_rtsgpio) {
512 uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
513 uts |= UTS_LOOP;
514 imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
515 ucr2 |= UCR2_RXEN;
516 } else {
517 ucr2 &= ~UCR2_RXEN;
518 }
519
520 imx_uart_writel(sport, ucr2, UCR2);
521}
522
523/* called with port.lock taken and irqs off */
524static void imx_uart_enable_ms(struct uart_port *port)
525{
526 struct imx_port *sport = (struct imx_port *)port;
527
528 mod_timer(&sport->timer, jiffies);
529
530 mctrl_gpio_enable_ms(sport->gpios);
531}
532
533static void imx_uart_dma_tx(struct imx_port *sport);
534
535/* called with port.lock taken and irqs off */
536static inline void imx_uart_transmit_buffer(struct imx_port *sport)
537{
538 struct circ_buf *xmit = &sport->port.state->xmit;
539
540 if (sport->port.x_char) {
541 /* Send next char */
542 imx_uart_writel(sport, sport->port.x_char, URTX0);
543 sport->port.icount.tx++;
544 sport->port.x_char = 0;
545 return;
546 }
547
548 if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
549 imx_uart_stop_tx(&sport->port);
550 return;
551 }
552
553 if (sport->dma_is_enabled) {
554 u32 ucr1;
555 /*
556 * We've just sent a X-char Ensure the TX DMA is enabled
557 * and the TX IRQ is disabled.
558 **/
559 ucr1 = imx_uart_readl(sport, UCR1);
560 ucr1 &= ~UCR1_TRDYEN;
561 if (sport->dma_is_txing) {
562 ucr1 |= UCR1_TXDMAEN;
563 imx_uart_writel(sport, ucr1, UCR1);
564 } else {
565 imx_uart_writel(sport, ucr1, UCR1);
566 imx_uart_dma_tx(sport);
567 }
568
569 return;
570 }
571
572 while (!uart_circ_empty(xmit) &&
573 !(imx_uart_readl(sport, imx_uart_uts_reg(sport)) & UTS_TXFULL)) {
574 /* send xmit->buf[xmit->tail]
575 * out the port here */
576 imx_uart_writel(sport, xmit->buf[xmit->tail], URTX0);
577 uart_xmit_advance(&sport->port, 1);
578 }
579
580 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
581 uart_write_wakeup(&sport->port);
582
583 if (uart_circ_empty(xmit))
584 imx_uart_stop_tx(&sport->port);
585}
586
587static void imx_uart_dma_tx_callback(void *data)
588{
589 struct imx_port *sport = data;
590 struct scatterlist *sgl = &sport->tx_sgl[0];
591 struct circ_buf *xmit = &sport->port.state->xmit;
592 unsigned long flags;
593 u32 ucr1;
594
595 spin_lock_irqsave(&sport->port.lock, flags);
596
597 dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
598
599 ucr1 = imx_uart_readl(sport, UCR1);
600 ucr1 &= ~UCR1_TXDMAEN;
601 imx_uart_writel(sport, ucr1, UCR1);
602
603 uart_xmit_advance(&sport->port, sport->tx_bytes);
604
605 dev_dbg(sport->port.dev, "we finish the TX DMA.\n");
606
607 sport->dma_is_txing = 0;
608
609 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
610 uart_write_wakeup(&sport->port);
611
612 if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port))
613 imx_uart_dma_tx(sport);
614 else if (sport->port.rs485.flags & SER_RS485_ENABLED) {
615 u32 ucr4 = imx_uart_readl(sport, UCR4);
616 ucr4 |= UCR4_TCEN;
617 imx_uart_writel(sport, ucr4, UCR4);
618 }
619
620 spin_unlock_irqrestore(&sport->port.lock, flags);
621}
622
623/* called with port.lock taken and irqs off */
624static void imx_uart_dma_tx(struct imx_port *sport)
625{
626 struct circ_buf *xmit = &sport->port.state->xmit;
627 struct scatterlist *sgl = sport->tx_sgl;
628 struct dma_async_tx_descriptor *desc;
629 struct dma_chan *chan = sport->dma_chan_tx;
630 struct device *dev = sport->port.dev;
631 u32 ucr1, ucr4;
632 int ret;
633
634 if (sport->dma_is_txing)
635 return;
636
637 ucr4 = imx_uart_readl(sport, UCR4);
638 ucr4 &= ~UCR4_TCEN;
639 imx_uart_writel(sport, ucr4, UCR4);
640
641 sport->tx_bytes = uart_circ_chars_pending(xmit);
642
643 if (xmit->tail < xmit->head || xmit->head == 0) {
644 sport->dma_tx_nents = 1;
645 sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes);
646 } else {
647 sport->dma_tx_nents = 2;
648 sg_init_table(sgl, 2);
649 sg_set_buf(sgl, xmit->buf + xmit->tail,
650 UART_XMIT_SIZE - xmit->tail);
651 sg_set_buf(sgl + 1, xmit->buf, xmit->head);
652 }
653
654 ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
655 if (ret == 0) {
656 dev_err(dev, "DMA mapping error for TX.\n");
657 return;
658 }
659 desc = dmaengine_prep_slave_sg(chan, sgl, ret,
660 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
661 if (!desc) {
662 dma_unmap_sg(dev, sgl, sport->dma_tx_nents,
663 DMA_TO_DEVICE);
664 dev_err(dev, "We cannot prepare for the TX slave dma!\n");
665 return;
666 }
667 desc->callback = imx_uart_dma_tx_callback;
668 desc->callback_param = sport;
669
670 dev_dbg(dev, "TX: prepare to send %lu bytes by DMA.\n",
671 uart_circ_chars_pending(xmit));
672
673 ucr1 = imx_uart_readl(sport, UCR1);
674 ucr1 |= UCR1_TXDMAEN;
675 imx_uart_writel(sport, ucr1, UCR1);
676
677 /* fire it */
678 sport->dma_is_txing = 1;
679 dmaengine_submit(desc);
680 dma_async_issue_pending(chan);
681 return;
682}
683
684/* called with port.lock taken and irqs off */
685static void imx_uart_start_tx(struct uart_port *port)
686{
687 struct imx_port *sport = (struct imx_port *)port;
688 u32 ucr1;
689
690 if (!sport->port.x_char && uart_circ_empty(&port->state->xmit))
691 return;
692
693 /*
694 * We cannot simply do nothing here if sport->tx_state == SEND already
695 * because UCR1_TXMPTYEN might already have been cleared in
696 * imx_uart_stop_tx(), but tx_state is still SEND.
697 */
698
699 if (port->rs485.flags & SER_RS485_ENABLED) {
700 if (sport->tx_state == OFF) {
701 u32 ucr2 = imx_uart_readl(sport, UCR2);
702 if (port->rs485.flags & SER_RS485_RTS_ON_SEND)
703 imx_uart_rts_active(sport, &ucr2);
704 else
705 imx_uart_rts_inactive(sport, &ucr2);
706 imx_uart_writel(sport, ucr2, UCR2);
707
708 if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
709 imx_uart_stop_rx(port);
710
711 sport->tx_state = WAIT_AFTER_RTS;
712
713 if (port->rs485.delay_rts_before_send > 0) {
714 start_hrtimer_ms(&sport->trigger_start_tx,
715 port->rs485.delay_rts_before_send);
716 return;
717 }
718
719 /* continue without any delay */
720 }
721
722 if (sport->tx_state == WAIT_AFTER_SEND
723 || sport->tx_state == WAIT_AFTER_RTS) {
724
725 hrtimer_try_to_cancel(&sport->trigger_stop_tx);
726
727 /*
728 * Enable transmitter and shifter empty irq only if DMA
729 * is off. In the DMA case this is done in the
730 * tx-callback.
731 */
732 if (!sport->dma_is_enabled) {
733 u32 ucr4 = imx_uart_readl(sport, UCR4);
734 ucr4 |= UCR4_TCEN;
735 imx_uart_writel(sport, ucr4, UCR4);
736 }
737
738 sport->tx_state = SEND;
739 }
740 } else {
741 sport->tx_state = SEND;
742 }
743
744 if (!sport->dma_is_enabled) {
745 ucr1 = imx_uart_readl(sport, UCR1);
746 imx_uart_writel(sport, ucr1 | UCR1_TRDYEN, UCR1);
747 }
748
749 if (sport->dma_is_enabled) {
750 if (sport->port.x_char) {
751 /* We have X-char to send, so enable TX IRQ and
752 * disable TX DMA to let TX interrupt to send X-char */
753 ucr1 = imx_uart_readl(sport, UCR1);
754 ucr1 &= ~UCR1_TXDMAEN;
755 ucr1 |= UCR1_TRDYEN;
756 imx_uart_writel(sport, ucr1, UCR1);
757 return;
758 }
759
760 if (!uart_circ_empty(&port->state->xmit) &&
761 !uart_tx_stopped(port))
762 imx_uart_dma_tx(sport);
763 return;
764 }
765}
766
767static irqreturn_t __imx_uart_rtsint(int irq, void *dev_id)
768{
769 struct imx_port *sport = dev_id;
770 u32 usr1;
771
772 imx_uart_writel(sport, USR1_RTSD, USR1);
773 usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS;
774 uart_handle_cts_change(&sport->port, !!usr1);
775 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
776
777 return IRQ_HANDLED;
778}
779
780static irqreturn_t imx_uart_rtsint(int irq, void *dev_id)
781{
782 struct imx_port *sport = dev_id;
783 irqreturn_t ret;
784
785 spin_lock(&sport->port.lock);
786
787 ret = __imx_uart_rtsint(irq, dev_id);
788
789 spin_unlock(&sport->port.lock);
790
791 return ret;
792}
793
794static irqreturn_t imx_uart_txint(int irq, void *dev_id)
795{
796 struct imx_port *sport = dev_id;
797
798 spin_lock(&sport->port.lock);
799 imx_uart_transmit_buffer(sport);
800 spin_unlock(&sport->port.lock);
801 return IRQ_HANDLED;
802}
803
804static irqreturn_t __imx_uart_rxint(int irq, void *dev_id)
805{
806 struct imx_port *sport = dev_id;
807 unsigned int rx, flg, ignored = 0;
808 struct tty_port *port = &sport->port.state->port;
809
810 while (imx_uart_readl(sport, USR2) & USR2_RDR) {
811 u32 usr2;
812
813 flg = TTY_NORMAL;
814 sport->port.icount.rx++;
815
816 rx = imx_uart_readl(sport, URXD0);
817
818 usr2 = imx_uart_readl(sport, USR2);
819 if (usr2 & USR2_BRCD) {
820 imx_uart_writel(sport, USR2_BRCD, USR2);
821 if (uart_handle_break(&sport->port))
822 continue;
823 }
824
825 if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
826 continue;
827
828 if (unlikely(rx & URXD_ERR)) {
829 if (rx & URXD_BRK)
830 sport->port.icount.brk++;
831 else if (rx & URXD_PRERR)
832 sport->port.icount.parity++;
833 else if (rx & URXD_FRMERR)
834 sport->port.icount.frame++;
835 if (rx & URXD_OVRRUN)
836 sport->port.icount.overrun++;
837
838 if (rx & sport->port.ignore_status_mask) {
839 if (++ignored > 100)
840 goto out;
841 continue;
842 }
843
844 rx &= (sport->port.read_status_mask | 0xFF);
845
846 if (rx & URXD_BRK)
847 flg = TTY_BREAK;
848 else if (rx & URXD_PRERR)
849 flg = TTY_PARITY;
850 else if (rx & URXD_FRMERR)
851 flg = TTY_FRAME;
852 if (rx & URXD_OVRRUN)
853 flg = TTY_OVERRUN;
854
855 sport->port.sysrq = 0;
856 }
857
858 if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
859 goto out;
860
861 if (tty_insert_flip_char(port, rx, flg) == 0)
862 sport->port.icount.buf_overrun++;
863 }
864
865out:
866 tty_flip_buffer_push(port);
867
868 return IRQ_HANDLED;
869}
870
871static irqreturn_t imx_uart_rxint(int irq, void *dev_id)
872{
873 struct imx_port *sport = dev_id;
874 irqreturn_t ret;
875
876 spin_lock(&sport->port.lock);
877
878 ret = __imx_uart_rxint(irq, dev_id);
879
880 spin_unlock(&sport->port.lock);
881
882 return ret;
883}
884
885static void imx_uart_clear_rx_errors(struct imx_port *sport);
886
887/*
888 * We have a modem side uart, so the meanings of RTS and CTS are inverted.
889 */
890static unsigned int imx_uart_get_hwmctrl(struct imx_port *sport)
891{
892 unsigned int tmp = TIOCM_DSR;
893 unsigned usr1 = imx_uart_readl(sport, USR1);
894 unsigned usr2 = imx_uart_readl(sport, USR2);
895
896 if (usr1 & USR1_RTSS)
897 tmp |= TIOCM_CTS;
898
899 /* in DCE mode DCDIN is always 0 */
900 if (!(usr2 & USR2_DCDIN))
901 tmp |= TIOCM_CAR;
902
903 if (sport->dte_mode)
904 if (!(imx_uart_readl(sport, USR2) & USR2_RIIN))
905 tmp |= TIOCM_RI;
906
907 return tmp;
908}
909
910/*
911 * Handle any change of modem status signal since we were last called.
912 */
913static void imx_uart_mctrl_check(struct imx_port *sport)
914{
915 unsigned int status, changed;
916
917 status = imx_uart_get_hwmctrl(sport);
918 changed = status ^ sport->old_status;
919
920 if (changed == 0)
921 return;
922
923 sport->old_status = status;
924
925 if (changed & TIOCM_RI && status & TIOCM_RI)
926 sport->port.icount.rng++;
927 if (changed & TIOCM_DSR)
928 sport->port.icount.dsr++;
929 if (changed & TIOCM_CAR)
930 uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
931 if (changed & TIOCM_CTS)
932 uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
933
934 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
935}
936
937static irqreturn_t imx_uart_int(int irq, void *dev_id)
938{
939 struct imx_port *sport = dev_id;
940 unsigned int usr1, usr2, ucr1, ucr2, ucr3, ucr4;
941 irqreturn_t ret = IRQ_NONE;
942
943 spin_lock(&sport->port.lock);
944
945 usr1 = imx_uart_readl(sport, USR1);
946 usr2 = imx_uart_readl(sport, USR2);
947 ucr1 = imx_uart_readl(sport, UCR1);
948 ucr2 = imx_uart_readl(sport, UCR2);
949 ucr3 = imx_uart_readl(sport, UCR3);
950 ucr4 = imx_uart_readl(sport, UCR4);
951
952 /*
953 * Even if a condition is true that can trigger an irq only handle it if
954 * the respective irq source is enabled. This prevents some undesired
955 * actions, for example if a character that sits in the RX FIFO and that
956 * should be fetched via DMA is tried to be fetched using PIO. Or the
957 * receiver is currently off and so reading from URXD0 results in an
958 * exception. So just mask the (raw) status bits for disabled irqs.
959 */
960 if ((ucr1 & UCR1_RRDYEN) == 0)
961 usr1 &= ~USR1_RRDY;
962 if ((ucr2 & UCR2_ATEN) == 0)
963 usr1 &= ~USR1_AGTIM;
964 if ((ucr1 & UCR1_TRDYEN) == 0)
965 usr1 &= ~USR1_TRDY;
966 if ((ucr4 & UCR4_TCEN) == 0)
967 usr2 &= ~USR2_TXDC;
968 if ((ucr3 & UCR3_DTRDEN) == 0)
969 usr1 &= ~USR1_DTRD;
970 if ((ucr1 & UCR1_RTSDEN) == 0)
971 usr1 &= ~USR1_RTSD;
972 if ((ucr3 & UCR3_AWAKEN) == 0)
973 usr1 &= ~USR1_AWAKE;
974 if ((ucr4 & UCR4_OREN) == 0)
975 usr2 &= ~USR2_ORE;
976
977 if (usr1 & (USR1_RRDY | USR1_AGTIM)) {
978 imx_uart_writel(sport, USR1_AGTIM, USR1);
979
980 __imx_uart_rxint(irq, dev_id);
981 ret = IRQ_HANDLED;
982 }
983
984 if ((usr1 & USR1_TRDY) || (usr2 & USR2_TXDC)) {
985 imx_uart_transmit_buffer(sport);
986 ret = IRQ_HANDLED;
987 }
988
989 if (usr1 & USR1_DTRD) {
990 imx_uart_writel(sport, USR1_DTRD, USR1);
991
992 imx_uart_mctrl_check(sport);
993
994 ret = IRQ_HANDLED;
995 }
996
997 if (usr1 & USR1_RTSD) {
998 __imx_uart_rtsint(irq, dev_id);
999 ret = IRQ_HANDLED;
1000 }
1001
1002 if (usr1 & USR1_AWAKE) {
1003 imx_uart_writel(sport, USR1_AWAKE, USR1);
1004 ret = IRQ_HANDLED;
1005 }
1006
1007 if (usr2 & USR2_ORE) {
1008 sport->port.icount.overrun++;
1009 imx_uart_writel(sport, USR2_ORE, USR2);
1010 ret = IRQ_HANDLED;
1011 }
1012
1013 spin_unlock(&sport->port.lock);
1014
1015 return ret;
1016}
1017
1018/*
1019 * Return TIOCSER_TEMT when transmitter is not busy.
1020 */
1021static unsigned int imx_uart_tx_empty(struct uart_port *port)
1022{
1023 struct imx_port *sport = (struct imx_port *)port;
1024 unsigned int ret;
1025
1026 ret = (imx_uart_readl(sport, USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
1027
1028 /* If the TX DMA is working, return 0. */
1029 if (sport->dma_is_txing)
1030 ret = 0;
1031
1032 return ret;
1033}
1034
1035/* called with port.lock taken and irqs off */
1036static unsigned int imx_uart_get_mctrl(struct uart_port *port)
1037{
1038 struct imx_port *sport = (struct imx_port *)port;
1039 unsigned int ret = imx_uart_get_hwmctrl(sport);
1040
1041 mctrl_gpio_get(sport->gpios, &ret);
1042
1043 return ret;
1044}
1045
1046/* called with port.lock taken and irqs off */
1047static void imx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1048{
1049 struct imx_port *sport = (struct imx_port *)port;
1050 u32 ucr3, uts;
1051
1052 if (!(port->rs485.flags & SER_RS485_ENABLED)) {
1053 u32 ucr2;
1054
1055 /*
1056 * Turn off autoRTS if RTS is lowered and restore autoRTS
1057 * setting if RTS is raised.
1058 */
1059 ucr2 = imx_uart_readl(sport, UCR2);
1060 ucr2 &= ~(UCR2_CTS | UCR2_CTSC);
1061 if (mctrl & TIOCM_RTS) {
1062 ucr2 |= UCR2_CTS;
1063 /*
1064 * UCR2_IRTS is unset if and only if the port is
1065 * configured for CRTSCTS, so we use inverted UCR2_IRTS
1066 * to get the state to restore to.
1067 */
1068 if (!(ucr2 & UCR2_IRTS))
1069 ucr2 |= UCR2_CTSC;
1070 }
1071 imx_uart_writel(sport, ucr2, UCR2);
1072 }
1073
1074 ucr3 = imx_uart_readl(sport, UCR3) & ~UCR3_DSR;
1075 if (!(mctrl & TIOCM_DTR))
1076 ucr3 |= UCR3_DSR;
1077 imx_uart_writel(sport, ucr3, UCR3);
1078
1079 uts = imx_uart_readl(sport, imx_uart_uts_reg(sport)) & ~UTS_LOOP;
1080 if (mctrl & TIOCM_LOOP)
1081 uts |= UTS_LOOP;
1082 imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
1083
1084 mctrl_gpio_set(sport->gpios, mctrl);
1085}
1086
1087/*
1088 * Interrupts always disabled.
1089 */
1090static void imx_uart_break_ctl(struct uart_port *port, int break_state)
1091{
1092 struct imx_port *sport = (struct imx_port *)port;
1093 unsigned long flags;
1094 u32 ucr1;
1095
1096 spin_lock_irqsave(&sport->port.lock, flags);
1097
1098 ucr1 = imx_uart_readl(sport, UCR1) & ~UCR1_SNDBRK;
1099
1100 if (break_state != 0)
1101 ucr1 |= UCR1_SNDBRK;
1102
1103 imx_uart_writel(sport, ucr1, UCR1);
1104
1105 spin_unlock_irqrestore(&sport->port.lock, flags);
1106}
1107
1108/*
1109 * This is our per-port timeout handler, for checking the
1110 * modem status signals.
1111 */
1112static void imx_uart_timeout(struct timer_list *t)
1113{
1114 struct imx_port *sport = from_timer(sport, t, timer);
1115 unsigned long flags;
1116
1117 if (sport->port.state) {
1118 spin_lock_irqsave(&sport->port.lock, flags);
1119 imx_uart_mctrl_check(sport);
1120 spin_unlock_irqrestore(&sport->port.lock, flags);
1121
1122 mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
1123 }
1124}
1125
1126/*
1127 * There are two kinds of RX DMA interrupts(such as in the MX6Q):
1128 * [1] the RX DMA buffer is full.
1129 * [2] the aging timer expires
1130 *
1131 * Condition [2] is triggered when a character has been sitting in the FIFO
1132 * for at least 8 byte durations.
1133 */
1134static void imx_uart_dma_rx_callback(void *data)
1135{
1136 struct imx_port *sport = data;
1137 struct dma_chan *chan = sport->dma_chan_rx;
1138 struct scatterlist *sgl = &sport->rx_sgl;
1139 struct tty_port *port = &sport->port.state->port;
1140 struct dma_tx_state state;
1141 struct circ_buf *rx_ring = &sport->rx_ring;
1142 enum dma_status status;
1143 unsigned int w_bytes = 0;
1144 unsigned int r_bytes;
1145 unsigned int bd_size;
1146
1147 status = dmaengine_tx_status(chan, sport->rx_cookie, &state);
1148
1149 if (status == DMA_ERROR) {
1150 imx_uart_clear_rx_errors(sport);
1151 return;
1152 }
1153
1154 if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) {
1155
1156 /*
1157 * The state-residue variable represents the empty space
1158 * relative to the entire buffer. Taking this in consideration
1159 * the head is always calculated base on the buffer total
1160 * length - DMA transaction residue. The UART script from the
1161 * SDMA firmware will jump to the next buffer descriptor,
1162 * once a DMA transaction if finalized (IMX53 RM - A.4.1.2.4).
1163 * Taking this in consideration the tail is always at the
1164 * beginning of the buffer descriptor that contains the head.
1165 */
1166
1167 /* Calculate the head */
1168 rx_ring->head = sg_dma_len(sgl) - state.residue;
1169
1170 /* Calculate the tail. */
1171 bd_size = sg_dma_len(sgl) / sport->rx_periods;
1172 rx_ring->tail = ((rx_ring->head-1) / bd_size) * bd_size;
1173
1174 if (rx_ring->head <= sg_dma_len(sgl) &&
1175 rx_ring->head > rx_ring->tail) {
1176
1177 /* Move data from tail to head */
1178 r_bytes = rx_ring->head - rx_ring->tail;
1179
1180 /* CPU claims ownership of RX DMA buffer */
1181 dma_sync_sg_for_cpu(sport->port.dev, sgl, 1,
1182 DMA_FROM_DEVICE);
1183
1184 w_bytes = tty_insert_flip_string(port,
1185 sport->rx_buf + rx_ring->tail, r_bytes);
1186
1187 /* UART retrieves ownership of RX DMA buffer */
1188 dma_sync_sg_for_device(sport->port.dev, sgl, 1,
1189 DMA_FROM_DEVICE);
1190
1191 if (w_bytes != r_bytes)
1192 sport->port.icount.buf_overrun++;
1193
1194 sport->port.icount.rx += w_bytes;
1195 } else {
1196 WARN_ON(rx_ring->head > sg_dma_len(sgl));
1197 WARN_ON(rx_ring->head <= rx_ring->tail);
1198 }
1199 }
1200
1201 if (w_bytes) {
1202 tty_flip_buffer_push(port);
1203 dev_dbg(sport->port.dev, "We get %d bytes.\n", w_bytes);
1204 }
1205}
1206
1207static int imx_uart_start_rx_dma(struct imx_port *sport)
1208{
1209 struct scatterlist *sgl = &sport->rx_sgl;
1210 struct dma_chan *chan = sport->dma_chan_rx;
1211 struct device *dev = sport->port.dev;
1212 struct dma_async_tx_descriptor *desc;
1213 int ret;
1214
1215 sport->rx_ring.head = 0;
1216 sport->rx_ring.tail = 0;
1217
1218 sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size);
1219 ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE);
1220 if (ret == 0) {
1221 dev_err(dev, "DMA mapping error for RX.\n");
1222 return -EINVAL;
1223 }
1224
1225 desc = dmaengine_prep_dma_cyclic(chan, sg_dma_address(sgl),
1226 sg_dma_len(sgl), sg_dma_len(sgl) / sport->rx_periods,
1227 DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
1228
1229 if (!desc) {
1230 dma_unmap_sg(dev, sgl, 1, DMA_FROM_DEVICE);
1231 dev_err(dev, "We cannot prepare for the RX slave dma!\n");
1232 return -EINVAL;
1233 }
1234 desc->callback = imx_uart_dma_rx_callback;
1235 desc->callback_param = sport;
1236
1237 dev_dbg(dev, "RX: prepare for the DMA.\n");
1238 sport->dma_is_rxing = 1;
1239 sport->rx_cookie = dmaengine_submit(desc);
1240 dma_async_issue_pending(chan);
1241 return 0;
1242}
1243
1244static void imx_uart_clear_rx_errors(struct imx_port *sport)
1245{
1246 struct tty_port *port = &sport->port.state->port;
1247 u32 usr1, usr2;
1248
1249 usr1 = imx_uart_readl(sport, USR1);
1250 usr2 = imx_uart_readl(sport, USR2);
1251
1252 if (usr2 & USR2_BRCD) {
1253 sport->port.icount.brk++;
1254 imx_uart_writel(sport, USR2_BRCD, USR2);
1255 uart_handle_break(&sport->port);
1256 if (tty_insert_flip_char(port, 0, TTY_BREAK) == 0)
1257 sport->port.icount.buf_overrun++;
1258 tty_flip_buffer_push(port);
1259 } else {
1260 if (usr1 & USR1_FRAMERR) {
1261 sport->port.icount.frame++;
1262 imx_uart_writel(sport, USR1_FRAMERR, USR1);
1263 } else if (usr1 & USR1_PARITYERR) {
1264 sport->port.icount.parity++;
1265 imx_uart_writel(sport, USR1_PARITYERR, USR1);
1266 }
1267 }
1268
1269 if (usr2 & USR2_ORE) {
1270 sport->port.icount.overrun++;
1271 imx_uart_writel(sport, USR2_ORE, USR2);
1272 }
1273
1274}
1275
1276#define TXTL_DEFAULT 2 /* reset default */
1277#define RXTL_DEFAULT 8 /* 8 characters or aging timer */
1278#define TXTL_DMA 8 /* DMA burst setting */
1279#define RXTL_DMA 9 /* DMA burst setting */
1280
1281static void imx_uart_setup_ufcr(struct imx_port *sport,
1282 unsigned char txwl, unsigned char rxwl)
1283{
1284 unsigned int val;
1285
1286 /* set receiver / transmitter trigger level */
1287 val = imx_uart_readl(sport, UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
1288 val |= txwl << UFCR_TXTL_SHF | rxwl;
1289 imx_uart_writel(sport, val, UFCR);
1290}
1291
1292static void imx_uart_dma_exit(struct imx_port *sport)
1293{
1294 if (sport->dma_chan_rx) {
1295 dmaengine_terminate_sync(sport->dma_chan_rx);
1296 dma_release_channel(sport->dma_chan_rx);
1297 sport->dma_chan_rx = NULL;
1298 sport->rx_cookie = -EINVAL;
1299 kfree(sport->rx_buf);
1300 sport->rx_buf = NULL;
1301 }
1302
1303 if (sport->dma_chan_tx) {
1304 dmaengine_terminate_sync(sport->dma_chan_tx);
1305 dma_release_channel(sport->dma_chan_tx);
1306 sport->dma_chan_tx = NULL;
1307 }
1308}
1309
1310static int imx_uart_dma_init(struct imx_port *sport)
1311{
1312 struct dma_slave_config slave_config = {};
1313 struct device *dev = sport->port.dev;
1314 int ret;
1315
1316 /* Prepare for RX : */
1317 sport->dma_chan_rx = dma_request_slave_channel(dev, "rx");
1318 if (!sport->dma_chan_rx) {
1319 dev_dbg(dev, "cannot get the DMA channel.\n");
1320 ret = -EINVAL;
1321 goto err;
1322 }
1323
1324 slave_config.direction = DMA_DEV_TO_MEM;
1325 slave_config.src_addr = sport->port.mapbase + URXD0;
1326 slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1327 /* one byte less than the watermark level to enable the aging timer */
1328 slave_config.src_maxburst = RXTL_DMA - 1;
1329 ret = dmaengine_slave_config(sport->dma_chan_rx, &slave_config);
1330 if (ret) {
1331 dev_err(dev, "error in RX dma configuration.\n");
1332 goto err;
1333 }
1334
1335 sport->rx_buf_size = sport->rx_period_length * sport->rx_periods;
1336 sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL);
1337 if (!sport->rx_buf) {
1338 ret = -ENOMEM;
1339 goto err;
1340 }
1341 sport->rx_ring.buf = sport->rx_buf;
1342
1343 /* Prepare for TX : */
1344 sport->dma_chan_tx = dma_request_slave_channel(dev, "tx");
1345 if (!sport->dma_chan_tx) {
1346 dev_err(dev, "cannot get the TX DMA channel!\n");
1347 ret = -EINVAL;
1348 goto err;
1349 }
1350
1351 slave_config.direction = DMA_MEM_TO_DEV;
1352 slave_config.dst_addr = sport->port.mapbase + URTX0;
1353 slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1354 slave_config.dst_maxburst = TXTL_DMA;
1355 ret = dmaengine_slave_config(sport->dma_chan_tx, &slave_config);
1356 if (ret) {
1357 dev_err(dev, "error in TX dma configuration.");
1358 goto err;
1359 }
1360
1361 return 0;
1362err:
1363 imx_uart_dma_exit(sport);
1364 return ret;
1365}
1366
1367static void imx_uart_enable_dma(struct imx_port *sport)
1368{
1369 u32 ucr1;
1370
1371 imx_uart_setup_ufcr(sport, TXTL_DMA, RXTL_DMA);
1372
1373 /* set UCR1 */
1374 ucr1 = imx_uart_readl(sport, UCR1);
1375 ucr1 |= UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN;
1376 imx_uart_writel(sport, ucr1, UCR1);
1377
1378 sport->dma_is_enabled = 1;
1379}
1380
1381static void imx_uart_disable_dma(struct imx_port *sport)
1382{
1383 u32 ucr1;
1384
1385 /* clear UCR1 */
1386 ucr1 = imx_uart_readl(sport, UCR1);
1387 ucr1 &= ~(UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN);
1388 imx_uart_writel(sport, ucr1, UCR1);
1389
1390 imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
1391
1392 sport->dma_is_enabled = 0;
1393}
1394
1395/* half the RX buffer size */
1396#define CTSTL 16
1397
1398static int imx_uart_startup(struct uart_port *port)
1399{
1400 struct imx_port *sport = (struct imx_port *)port;
1401 int retval, i;
1402 unsigned long flags;
1403 int dma_is_inited = 0;
1404 u32 ucr1, ucr2, ucr3, ucr4, uts;
1405
1406 retval = clk_prepare_enable(sport->clk_per);
1407 if (retval)
1408 return retval;
1409 retval = clk_prepare_enable(sport->clk_ipg);
1410 if (retval) {
1411 clk_disable_unprepare(sport->clk_per);
1412 return retval;
1413 }
1414
1415 imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
1416
1417 /* disable the DREN bit (Data Ready interrupt enable) before
1418 * requesting IRQs
1419 */
1420 ucr4 = imx_uart_readl(sport, UCR4);
1421
1422 /* set the trigger level for CTS */
1423 ucr4 &= ~(UCR4_CTSTL_MASK << UCR4_CTSTL_SHF);
1424 ucr4 |= CTSTL << UCR4_CTSTL_SHF;
1425
1426 imx_uart_writel(sport, ucr4 & ~UCR4_DREN, UCR4);
1427
1428 /* Can we enable the DMA support? */
1429 if (!uart_console(port) && imx_uart_dma_init(sport) == 0)
1430 dma_is_inited = 1;
1431
1432 spin_lock_irqsave(&sport->port.lock, flags);
1433 /* Reset fifo's and state machines */
1434 i = 100;
1435
1436 ucr2 = imx_uart_readl(sport, UCR2);
1437 ucr2 &= ~UCR2_SRST;
1438 imx_uart_writel(sport, ucr2, UCR2);
1439
1440 while (!(imx_uart_readl(sport, UCR2) & UCR2_SRST) && (--i > 0))
1441 udelay(1);
1442
1443 /*
1444 * Finally, clear and enable interrupts
1445 */
1446 imx_uart_writel(sport, USR1_RTSD | USR1_DTRD, USR1);
1447 imx_uart_writel(sport, USR2_ORE, USR2);
1448
1449 ucr1 = imx_uart_readl(sport, UCR1) & ~UCR1_RRDYEN;
1450 ucr1 |= UCR1_UARTEN;
1451 if (sport->have_rtscts)
1452 ucr1 |= UCR1_RTSDEN;
1453
1454 imx_uart_writel(sport, ucr1, UCR1);
1455
1456 ucr4 = imx_uart_readl(sport, UCR4) & ~(UCR4_OREN | UCR4_INVR);
1457 if (!dma_is_inited)
1458 ucr4 |= UCR4_OREN;
1459 if (sport->inverted_rx)
1460 ucr4 |= UCR4_INVR;
1461 imx_uart_writel(sport, ucr4, UCR4);
1462
1463 ucr3 = imx_uart_readl(sport, UCR3) & ~UCR3_INVT;
1464 /*
1465 * configure tx polarity before enabling tx
1466 */
1467 if (sport->inverted_tx)
1468 ucr3 |= UCR3_INVT;
1469
1470 if (!imx_uart_is_imx1(sport)) {
1471 ucr3 |= UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
1472
1473 if (sport->dte_mode)
1474 /* disable broken interrupts */
1475 ucr3 &= ~(UCR3_RI | UCR3_DCD);
1476 }
1477 imx_uart_writel(sport, ucr3, UCR3);
1478
1479 ucr2 = imx_uart_readl(sport, UCR2) & ~UCR2_ATEN;
1480 ucr2 |= (UCR2_RXEN | UCR2_TXEN);
1481 if (!sport->have_rtscts)
1482 ucr2 |= UCR2_IRTS;
1483 /*
1484 * make sure the edge sensitive RTS-irq is disabled,
1485 * we're using RTSD instead.
1486 */
1487 if (!imx_uart_is_imx1(sport))
1488 ucr2 &= ~UCR2_RTSEN;
1489 imx_uart_writel(sport, ucr2, UCR2);
1490
1491 /*
1492 * Enable modem status interrupts
1493 */
1494 imx_uart_enable_ms(&sport->port);
1495
1496 if (dma_is_inited) {
1497 imx_uart_enable_dma(sport);
1498 imx_uart_start_rx_dma(sport);
1499 } else {
1500 ucr1 = imx_uart_readl(sport, UCR1);
1501 ucr1 |= UCR1_RRDYEN;
1502 imx_uart_writel(sport, ucr1, UCR1);
1503
1504 ucr2 = imx_uart_readl(sport, UCR2);
1505 ucr2 |= UCR2_ATEN;
1506 imx_uart_writel(sport, ucr2, UCR2);
1507 }
1508
1509 /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
1510 uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
1511 uts &= ~UTS_LOOP;
1512 imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
1513
1514 spin_unlock_irqrestore(&sport->port.lock, flags);
1515
1516 return 0;
1517}
1518
1519static void imx_uart_shutdown(struct uart_port *port)
1520{
1521 struct imx_port *sport = (struct imx_port *)port;
1522 unsigned long flags;
1523 u32 ucr1, ucr2, ucr4, uts;
1524
1525 if (sport->dma_is_enabled) {
1526 dmaengine_terminate_sync(sport->dma_chan_tx);
1527 if (sport->dma_is_txing) {
1528 dma_unmap_sg(sport->port.dev, &sport->tx_sgl[0],
1529 sport->dma_tx_nents, DMA_TO_DEVICE);
1530 sport->dma_is_txing = 0;
1531 }
1532 dmaengine_terminate_sync(sport->dma_chan_rx);
1533 if (sport->dma_is_rxing) {
1534 dma_unmap_sg(sport->port.dev, &sport->rx_sgl,
1535 1, DMA_FROM_DEVICE);
1536 sport->dma_is_rxing = 0;
1537 }
1538
1539 spin_lock_irqsave(&sport->port.lock, flags);
1540 imx_uart_stop_tx(port);
1541 imx_uart_stop_rx(port);
1542 imx_uart_disable_dma(sport);
1543 spin_unlock_irqrestore(&sport->port.lock, flags);
1544 imx_uart_dma_exit(sport);
1545 }
1546
1547 mctrl_gpio_disable_ms(sport->gpios);
1548
1549 spin_lock_irqsave(&sport->port.lock, flags);
1550 ucr2 = imx_uart_readl(sport, UCR2);
1551 ucr2 &= ~(UCR2_TXEN | UCR2_ATEN);
1552 imx_uart_writel(sport, ucr2, UCR2);
1553 spin_unlock_irqrestore(&sport->port.lock, flags);
1554
1555 /*
1556 * Stop our timer.
1557 */
1558 del_timer_sync(&sport->timer);
1559
1560 /*
1561 * Disable all interrupts, port and break condition.
1562 */
1563
1564 spin_lock_irqsave(&sport->port.lock, flags);
1565
1566 ucr1 = imx_uart_readl(sport, UCR1);
1567 ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_RXDMAEN | UCR1_ATDMAEN);
1568 /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
1569 if (port->rs485.flags & SER_RS485_ENABLED &&
1570 port->rs485.flags & SER_RS485_RTS_ON_SEND &&
1571 sport->have_rtscts && !sport->have_rtsgpio) {
1572 uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
1573 uts |= UTS_LOOP;
1574 imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
1575 ucr1 |= UCR1_UARTEN;
1576 } else {
1577 ucr1 &= ~UCR1_UARTEN;
1578 }
1579 imx_uart_writel(sport, ucr1, UCR1);
1580
1581 ucr4 = imx_uart_readl(sport, UCR4);
1582 ucr4 &= ~UCR4_TCEN;
1583 imx_uart_writel(sport, ucr4, UCR4);
1584
1585 spin_unlock_irqrestore(&sport->port.lock, flags);
1586
1587 clk_disable_unprepare(sport->clk_per);
1588 clk_disable_unprepare(sport->clk_ipg);
1589}
1590
1591/* called with port.lock taken and irqs off */
1592static void imx_uart_flush_buffer(struct uart_port *port)
1593{
1594 struct imx_port *sport = (struct imx_port *)port;
1595 struct scatterlist *sgl = &sport->tx_sgl[0];
1596 u32 ucr2;
1597 int i = 100, ubir, ubmr, uts;
1598
1599 if (!sport->dma_chan_tx)
1600 return;
1601
1602 sport->tx_bytes = 0;
1603 dmaengine_terminate_all(sport->dma_chan_tx);
1604 if (sport->dma_is_txing) {
1605 u32 ucr1;
1606
1607 dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents,
1608 DMA_TO_DEVICE);
1609 ucr1 = imx_uart_readl(sport, UCR1);
1610 ucr1 &= ~UCR1_TXDMAEN;
1611 imx_uart_writel(sport, ucr1, UCR1);
1612 sport->dma_is_txing = 0;
1613 }
1614
1615 /*
1616 * According to the Reference Manual description of the UART SRST bit:
1617 *
1618 * "Reset the transmit and receive state machines,
1619 * all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD
1620 * and UTS[6-3]".
1621 *
1622 * We don't need to restore the old values from USR1, USR2, URXD and
1623 * UTXD. UBRC is read only, so only save/restore the other three
1624 * registers.
1625 */
1626 ubir = imx_uart_readl(sport, UBIR);
1627 ubmr = imx_uart_readl(sport, UBMR);
1628 uts = imx_uart_readl(sport, IMX21_UTS);
1629
1630 ucr2 = imx_uart_readl(sport, UCR2);
1631 ucr2 &= ~UCR2_SRST;
1632 imx_uart_writel(sport, ucr2, UCR2);
1633
1634 while (!(imx_uart_readl(sport, UCR2) & UCR2_SRST) && (--i > 0))
1635 udelay(1);
1636
1637 /* Restore the registers */
1638 imx_uart_writel(sport, ubir, UBIR);
1639 imx_uart_writel(sport, ubmr, UBMR);
1640 imx_uart_writel(sport, uts, IMX21_UTS);
1641}
1642
1643static void
1644imx_uart_set_termios(struct uart_port *port, struct ktermios *termios,
1645 const struct ktermios *old)
1646{
1647 struct imx_port *sport = (struct imx_port *)port;
1648 unsigned long flags;
1649 u32 ucr2, old_ucr2, ufcr;
1650 unsigned int baud, quot;
1651 unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
1652 unsigned long div;
1653 unsigned long num, denom, old_ubir, old_ubmr;
1654 uint64_t tdiv64;
1655
1656 /*
1657 * We only support CS7 and CS8.
1658 */
1659 while ((termios->c_cflag & CSIZE) != CS7 &&
1660 (termios->c_cflag & CSIZE) != CS8) {
1661 termios->c_cflag &= ~CSIZE;
1662 termios->c_cflag |= old_csize;
1663 old_csize = CS8;
1664 }
1665
1666 del_timer_sync(&sport->timer);
1667
1668 /*
1669 * Ask the core to calculate the divisor for us.
1670 */
1671 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
1672 quot = uart_get_divisor(port, baud);
1673
1674 spin_lock_irqsave(&sport->port.lock, flags);
1675
1676 /*
1677 * Read current UCR2 and save it for future use, then clear all the bits
1678 * except those we will or may need to preserve.
1679 */
1680 old_ucr2 = imx_uart_readl(sport, UCR2);
1681 ucr2 = old_ucr2 & (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN | UCR2_CTS);
1682
1683 ucr2 |= UCR2_SRST | UCR2_IRTS;
1684 if ((termios->c_cflag & CSIZE) == CS8)
1685 ucr2 |= UCR2_WS;
1686
1687 if (!sport->have_rtscts)
1688 termios->c_cflag &= ~CRTSCTS;
1689
1690 if (port->rs485.flags & SER_RS485_ENABLED) {
1691 /*
1692 * RTS is mandatory for rs485 operation, so keep
1693 * it under manual control and keep transmitter
1694 * disabled.
1695 */
1696 if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
1697 imx_uart_rts_active(sport, &ucr2);
1698 else
1699 imx_uart_rts_inactive(sport, &ucr2);
1700
1701 } else if (termios->c_cflag & CRTSCTS) {
1702 /*
1703 * Only let receiver control RTS output if we were not requested
1704 * to have RTS inactive (which then should take precedence).
1705 */
1706 if (ucr2 & UCR2_CTS)
1707 ucr2 |= UCR2_CTSC;
1708 }
1709
1710 if (termios->c_cflag & CRTSCTS)
1711 ucr2 &= ~UCR2_IRTS;
1712 if (termios->c_cflag & CSTOPB)
1713 ucr2 |= UCR2_STPB;
1714 if (termios->c_cflag & PARENB) {
1715 ucr2 |= UCR2_PREN;
1716 if (termios->c_cflag & PARODD)
1717 ucr2 |= UCR2_PROE;
1718 }
1719
1720 sport->port.read_status_mask = 0;
1721 if (termios->c_iflag & INPCK)
1722 sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
1723 if (termios->c_iflag & (BRKINT | PARMRK))
1724 sport->port.read_status_mask |= URXD_BRK;
1725
1726 /*
1727 * Characters to ignore
1728 */
1729 sport->port.ignore_status_mask = 0;
1730 if (termios->c_iflag & IGNPAR)
1731 sport->port.ignore_status_mask |= URXD_PRERR | URXD_FRMERR;
1732 if (termios->c_iflag & IGNBRK) {
1733 sport->port.ignore_status_mask |= URXD_BRK;
1734 /*
1735 * If we're ignoring parity and break indicators,
1736 * ignore overruns too (for real raw support).
1737 */
1738 if (termios->c_iflag & IGNPAR)
1739 sport->port.ignore_status_mask |= URXD_OVRRUN;
1740 }
1741
1742 if ((termios->c_cflag & CREAD) == 0)
1743 sport->port.ignore_status_mask |= URXD_DUMMY_READ;
1744
1745 /*
1746 * Update the per-port timeout.
1747 */
1748 uart_update_timeout(port, termios->c_cflag, baud);
1749
1750 /* custom-baudrate handling */
1751 div = sport->port.uartclk / (baud * 16);
1752 if (baud == 38400 && quot != div)
1753 baud = sport->port.uartclk / (quot * 16);
1754
1755 div = sport->port.uartclk / (baud * 16);
1756 if (div > 7)
1757 div = 7;
1758 if (!div)
1759 div = 1;
1760
1761 rational_best_approximation(16 * div * baud, sport->port.uartclk,
1762 1 << 16, 1 << 16, &num, &denom);
1763
1764 tdiv64 = sport->port.uartclk;
1765 tdiv64 *= num;
1766 do_div(tdiv64, denom * 16 * div);
1767 tty_termios_encode_baud_rate(termios,
1768 (speed_t)tdiv64, (speed_t)tdiv64);
1769
1770 num -= 1;
1771 denom -= 1;
1772
1773 ufcr = imx_uart_readl(sport, UFCR);
1774 ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
1775 imx_uart_writel(sport, ufcr, UFCR);
1776
1777 /*
1778 * Two registers below should always be written both and in this
1779 * particular order. One consequence is that we need to check if any of
1780 * them changes and then update both. We do need the check for change
1781 * as even writing the same values seem to "restart"
1782 * transmission/receiving logic in the hardware, that leads to data
1783 * breakage even when rate doesn't in fact change. E.g., user switches
1784 * RTS/CTS handshake and suddenly gets broken bytes.
1785 */
1786 old_ubir = imx_uart_readl(sport, UBIR);
1787 old_ubmr = imx_uart_readl(sport, UBMR);
1788 if (old_ubir != num || old_ubmr != denom) {
1789 imx_uart_writel(sport, num, UBIR);
1790 imx_uart_writel(sport, denom, UBMR);
1791 }
1792
1793 if (!imx_uart_is_imx1(sport))
1794 imx_uart_writel(sport, sport->port.uartclk / div / 1000,
1795 IMX21_ONEMS);
1796
1797 imx_uart_writel(sport, ucr2, UCR2);
1798
1799 if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
1800 imx_uart_enable_ms(&sport->port);
1801
1802 spin_unlock_irqrestore(&sport->port.lock, flags);
1803}
1804
1805static const char *imx_uart_type(struct uart_port *port)
1806{
1807 struct imx_port *sport = (struct imx_port *)port;
1808
1809 return sport->port.type == PORT_IMX ? "IMX" : NULL;
1810}
1811
1812/*
1813 * Configure/autoconfigure the port.
1814 */
1815static void imx_uart_config_port(struct uart_port *port, int flags)
1816{
1817 struct imx_port *sport = (struct imx_port *)port;
1818
1819 if (flags & UART_CONFIG_TYPE)
1820 sport->port.type = PORT_IMX;
1821}
1822
1823/*
1824 * Verify the new serial_struct (for TIOCSSERIAL).
1825 * The only change we allow are to the flags and type, and
1826 * even then only between PORT_IMX and PORT_UNKNOWN
1827 */
1828static int
1829imx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
1830{
1831 struct imx_port *sport = (struct imx_port *)port;
1832 int ret = 0;
1833
1834 if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
1835 ret = -EINVAL;
1836 if (sport->port.irq != ser->irq)
1837 ret = -EINVAL;
1838 if (ser->io_type != UPIO_MEM)
1839 ret = -EINVAL;
1840 if (sport->port.uartclk / 16 != ser->baud_base)
1841 ret = -EINVAL;
1842 if (sport->port.mapbase != (unsigned long)ser->iomem_base)
1843 ret = -EINVAL;
1844 if (sport->port.iobase != ser->port)
1845 ret = -EINVAL;
1846 if (ser->hub6 != 0)
1847 ret = -EINVAL;
1848 return ret;
1849}
1850
1851#if defined(CONFIG_CONSOLE_POLL)
1852
1853static int imx_uart_poll_init(struct uart_port *port)
1854{
1855 struct imx_port *sport = (struct imx_port *)port;
1856 unsigned long flags;
1857 u32 ucr1, ucr2;
1858 int retval;
1859
1860 retval = clk_prepare_enable(sport->clk_ipg);
1861 if (retval)
1862 return retval;
1863 retval = clk_prepare_enable(sport->clk_per);
1864 if (retval)
1865 clk_disable_unprepare(sport->clk_ipg);
1866
1867 imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
1868
1869 spin_lock_irqsave(&sport->port.lock, flags);
1870
1871 /*
1872 * Be careful about the order of enabling bits here. First enable the
1873 * receiver (UARTEN + RXEN) and only then the corresponding irqs.
1874 * This prevents that a character that already sits in the RX fifo is
1875 * triggering an irq but the try to fetch it from there results in an
1876 * exception because UARTEN or RXEN is still off.
1877 */
1878 ucr1 = imx_uart_readl(sport, UCR1);
1879 ucr2 = imx_uart_readl(sport, UCR2);
1880
1881 if (imx_uart_is_imx1(sport))
1882 ucr1 |= IMX1_UCR1_UARTCLKEN;
1883
1884 ucr1 |= UCR1_UARTEN;
1885 ucr1 &= ~(UCR1_TRDYEN | UCR1_RTSDEN | UCR1_RRDYEN);
1886
1887 ucr2 |= UCR2_RXEN | UCR2_TXEN;
1888 ucr2 &= ~UCR2_ATEN;
1889
1890 imx_uart_writel(sport, ucr1, UCR1);
1891 imx_uart_writel(sport, ucr2, UCR2);
1892
1893 /* now enable irqs */
1894 imx_uart_writel(sport, ucr1 | UCR1_RRDYEN, UCR1);
1895 imx_uart_writel(sport, ucr2 | UCR2_ATEN, UCR2);
1896
1897 spin_unlock_irqrestore(&sport->port.lock, flags);
1898
1899 return 0;
1900}
1901
1902static int imx_uart_poll_get_char(struct uart_port *port)
1903{
1904 struct imx_port *sport = (struct imx_port *)port;
1905 if (!(imx_uart_readl(sport, USR2) & USR2_RDR))
1906 return NO_POLL_CHAR;
1907
1908 return imx_uart_readl(sport, URXD0) & URXD_RX_DATA;
1909}
1910
1911static void imx_uart_poll_put_char(struct uart_port *port, unsigned char c)
1912{
1913 struct imx_port *sport = (struct imx_port *)port;
1914 unsigned int status;
1915
1916 /* drain */
1917 do {
1918 status = imx_uart_readl(sport, USR1);
1919 } while (~status & USR1_TRDY);
1920
1921 /* write */
1922 imx_uart_writel(sport, c, URTX0);
1923
1924 /* flush */
1925 do {
1926 status = imx_uart_readl(sport, USR2);
1927 } while (~status & USR2_TXDC);
1928}
1929#endif
1930
1931/* called with port.lock taken and irqs off or from .probe without locking */
1932static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termios,
1933 struct serial_rs485 *rs485conf)
1934{
1935 struct imx_port *sport = (struct imx_port *)port;
1936 u32 ucr2;
1937
1938 if (rs485conf->flags & SER_RS485_ENABLED) {
1939 /* Enable receiver if low-active RTS signal is requested */
1940 if (sport->have_rtscts && !sport->have_rtsgpio &&
1941 !(rs485conf->flags & SER_RS485_RTS_ON_SEND))
1942 rs485conf->flags |= SER_RS485_RX_DURING_TX;
1943
1944 /* disable transmitter */
1945 ucr2 = imx_uart_readl(sport, UCR2);
1946 if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
1947 imx_uart_rts_active(sport, &ucr2);
1948 else
1949 imx_uart_rts_inactive(sport, &ucr2);
1950 imx_uart_writel(sport, ucr2, UCR2);
1951 }
1952
1953 /* Make sure Rx is enabled in case Tx is active with Rx disabled */
1954 if (!(rs485conf->flags & SER_RS485_ENABLED) ||
1955 rs485conf->flags & SER_RS485_RX_DURING_TX)
1956 imx_uart_start_rx(port);
1957
1958 return 0;
1959}
1960
1961static const struct uart_ops imx_uart_pops = {
1962 .tx_empty = imx_uart_tx_empty,
1963 .set_mctrl = imx_uart_set_mctrl,
1964 .get_mctrl = imx_uart_get_mctrl,
1965 .stop_tx = imx_uart_stop_tx,
1966 .start_tx = imx_uart_start_tx,
1967 .stop_rx = imx_uart_stop_rx,
1968 .enable_ms = imx_uart_enable_ms,
1969 .break_ctl = imx_uart_break_ctl,
1970 .startup = imx_uart_startup,
1971 .shutdown = imx_uart_shutdown,
1972 .flush_buffer = imx_uart_flush_buffer,
1973 .set_termios = imx_uart_set_termios,
1974 .type = imx_uart_type,
1975 .config_port = imx_uart_config_port,
1976 .verify_port = imx_uart_verify_port,
1977#if defined(CONFIG_CONSOLE_POLL)
1978 .poll_init = imx_uart_poll_init,
1979 .poll_get_char = imx_uart_poll_get_char,
1980 .poll_put_char = imx_uart_poll_put_char,
1981#endif
1982};
1983
1984static struct imx_port *imx_uart_ports[UART_NR];
1985
1986#if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE)
1987static void imx_uart_console_putchar(struct uart_port *port, unsigned char ch)
1988{
1989 struct imx_port *sport = (struct imx_port *)port;
1990
1991 while (imx_uart_readl(sport, imx_uart_uts_reg(sport)) & UTS_TXFULL)
1992 barrier();
1993
1994 imx_uart_writel(sport, ch, URTX0);
1995}
1996
1997/*
1998 * Interrupts are disabled on entering
1999 */
2000static void
2001imx_uart_console_write(struct console *co, const char *s, unsigned int count)
2002{
2003 struct imx_port *sport = imx_uart_ports[co->index];
2004 struct imx_port_ucrs old_ucr;
2005 unsigned long flags;
2006 unsigned int ucr1;
2007 int locked = 1;
2008
2009 if (sport->port.sysrq)
2010 locked = 0;
2011 else if (oops_in_progress)
2012 locked = spin_trylock_irqsave(&sport->port.lock, flags);
2013 else
2014 spin_lock_irqsave(&sport->port.lock, flags);
2015
2016 /*
2017 * First, save UCR1/2/3 and then disable interrupts
2018 */
2019 imx_uart_ucrs_save(sport, &old_ucr);
2020 ucr1 = old_ucr.ucr1;
2021
2022 if (imx_uart_is_imx1(sport))
2023 ucr1 |= IMX1_UCR1_UARTCLKEN;
2024 ucr1 |= UCR1_UARTEN;
2025 ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN);
2026
2027 imx_uart_writel(sport, ucr1, UCR1);
2028
2029 imx_uart_writel(sport, old_ucr.ucr2 | UCR2_TXEN, UCR2);
2030
2031 uart_console_write(&sport->port, s, count, imx_uart_console_putchar);
2032
2033 /*
2034 * Finally, wait for transmitter to become empty
2035 * and restore UCR1/2/3
2036 */
2037 while (!(imx_uart_readl(sport, USR2) & USR2_TXDC));
2038
2039 imx_uart_ucrs_restore(sport, &old_ucr);
2040
2041 if (locked)
2042 spin_unlock_irqrestore(&sport->port.lock, flags);
2043}
2044
2045/*
2046 * If the port was already initialised (eg, by a boot loader),
2047 * try to determine the current setup.
2048 */
2049static void
2050imx_uart_console_get_options(struct imx_port *sport, int *baud,
2051 int *parity, int *bits)
2052{
2053
2054 if (imx_uart_readl(sport, UCR1) & UCR1_UARTEN) {
2055 /* ok, the port was enabled */
2056 unsigned int ucr2, ubir, ubmr, uartclk;
2057 unsigned int baud_raw;
2058 unsigned int ucfr_rfdiv;
2059
2060 ucr2 = imx_uart_readl(sport, UCR2);
2061
2062 *parity = 'n';
2063 if (ucr2 & UCR2_PREN) {
2064 if (ucr2 & UCR2_PROE)
2065 *parity = 'o';
2066 else
2067 *parity = 'e';
2068 }
2069
2070 if (ucr2 & UCR2_WS)
2071 *bits = 8;
2072 else
2073 *bits = 7;
2074
2075 ubir = imx_uart_readl(sport, UBIR) & 0xffff;
2076 ubmr = imx_uart_readl(sport, UBMR) & 0xffff;
2077
2078 ucfr_rfdiv = (imx_uart_readl(sport, UFCR) & UFCR_RFDIV) >> 7;
2079 if (ucfr_rfdiv == 6)
2080 ucfr_rfdiv = 7;
2081 else
2082 ucfr_rfdiv = 6 - ucfr_rfdiv;
2083
2084 uartclk = clk_get_rate(sport->clk_per);
2085 uartclk /= ucfr_rfdiv;
2086
2087 { /*
2088 * The next code provides exact computation of
2089 * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
2090 * without need of float support or long long division,
2091 * which would be required to prevent 32bit arithmetic overflow
2092 */
2093 unsigned int mul = ubir + 1;
2094 unsigned int div = 16 * (ubmr + 1);
2095 unsigned int rem = uartclk % div;
2096
2097 baud_raw = (uartclk / div) * mul;
2098 baud_raw += (rem * mul + div / 2) / div;
2099 *baud = (baud_raw + 50) / 100 * 100;
2100 }
2101
2102 if (*baud != baud_raw)
2103 dev_info(sport->port.dev, "Console IMX rounded baud rate from %d to %d\n",
2104 baud_raw, *baud);
2105 }
2106}
2107
2108static int
2109imx_uart_console_setup(struct console *co, char *options)
2110{
2111 struct imx_port *sport;
2112 int baud = 9600;
2113 int bits = 8;
2114 int parity = 'n';
2115 int flow = 'n';
2116 int retval;
2117
2118 /*
2119 * Check whether an invalid uart number has been specified, and
2120 * if so, search for the first available port that does have
2121 * console support.
2122 */
2123 if (co->index == -1 || co->index >= ARRAY_SIZE(imx_uart_ports))
2124 co->index = 0;
2125 sport = imx_uart_ports[co->index];
2126 if (sport == NULL)
2127 return -ENODEV;
2128
2129 /* For setting the registers, we only need to enable the ipg clock. */
2130 retval = clk_prepare_enable(sport->clk_ipg);
2131 if (retval)
2132 goto error_console;
2133
2134 if (options)
2135 uart_parse_options(options, &baud, &parity, &bits, &flow);
2136 else
2137 imx_uart_console_get_options(sport, &baud, &parity, &bits);
2138
2139 imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
2140
2141 retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
2142
2143 if (retval) {
2144 clk_disable_unprepare(sport->clk_ipg);
2145 goto error_console;
2146 }
2147
2148 retval = clk_prepare_enable(sport->clk_per);
2149 if (retval)
2150 clk_disable_unprepare(sport->clk_ipg);
2151
2152error_console:
2153 return retval;
2154}
2155
2156static int
2157imx_uart_console_exit(struct console *co)
2158{
2159 struct imx_port *sport = imx_uart_ports[co->index];
2160
2161 clk_disable_unprepare(sport->clk_per);
2162 clk_disable_unprepare(sport->clk_ipg);
2163
2164 return 0;
2165}
2166
2167static struct uart_driver imx_uart_uart_driver;
2168static struct console imx_uart_console = {
2169 .name = DEV_NAME,
2170 .write = imx_uart_console_write,
2171 .device = uart_console_device,
2172 .setup = imx_uart_console_setup,
2173 .exit = imx_uart_console_exit,
2174 .flags = CON_PRINTBUFFER,
2175 .index = -1,
2176 .data = &imx_uart_uart_driver,
2177};
2178
2179#define IMX_CONSOLE &imx_uart_console
2180
2181#else
2182#define IMX_CONSOLE NULL
2183#endif
2184
2185static struct uart_driver imx_uart_uart_driver = {
2186 .owner = THIS_MODULE,
2187 .driver_name = DRIVER_NAME,
2188 .dev_name = DEV_NAME,
2189 .major = SERIAL_IMX_MAJOR,
2190 .minor = MINOR_START,
2191 .nr = ARRAY_SIZE(imx_uart_ports),
2192 .cons = IMX_CONSOLE,
2193};
2194
2195static enum hrtimer_restart imx_trigger_start_tx(struct hrtimer *t)
2196{
2197 struct imx_port *sport = container_of(t, struct imx_port, trigger_start_tx);
2198 unsigned long flags;
2199
2200 spin_lock_irqsave(&sport->port.lock, flags);
2201 if (sport->tx_state == WAIT_AFTER_RTS)
2202 imx_uart_start_tx(&sport->port);
2203 spin_unlock_irqrestore(&sport->port.lock, flags);
2204
2205 return HRTIMER_NORESTART;
2206}
2207
2208static enum hrtimer_restart imx_trigger_stop_tx(struct hrtimer *t)
2209{
2210 struct imx_port *sport = container_of(t, struct imx_port, trigger_stop_tx);
2211 unsigned long flags;
2212
2213 spin_lock_irqsave(&sport->port.lock, flags);
2214 if (sport->tx_state == WAIT_AFTER_SEND)
2215 imx_uart_stop_tx(&sport->port);
2216 spin_unlock_irqrestore(&sport->port.lock, flags);
2217
2218 return HRTIMER_NORESTART;
2219}
2220
2221static const struct serial_rs485 imx_no_rs485 = {}; /* No RS485 if no RTS */
2222static const struct serial_rs485 imx_rs485_supported = {
2223 .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
2224 SER_RS485_RX_DURING_TX,
2225 .delay_rts_before_send = 1,
2226 .delay_rts_after_send = 1,
2227};
2228
2229/* Default RX DMA buffer configuration */
2230#define RX_DMA_PERIODS 16
2231#define RX_DMA_PERIOD_LEN (PAGE_SIZE / 4)
2232
2233static int imx_uart_probe(struct platform_device *pdev)
2234{
2235 struct device_node *np = pdev->dev.of_node;
2236 struct imx_port *sport;
2237 void __iomem *base;
2238 u32 dma_buf_conf[2];
2239 int ret = 0;
2240 u32 ucr1, ucr2, uts;
2241 struct resource *res;
2242 int txirq, rxirq, rtsirq;
2243
2244 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
2245 if (!sport)
2246 return -ENOMEM;
2247
2248 sport->devdata = of_device_get_match_data(&pdev->dev);
2249
2250 ret = of_alias_get_id(np, "serial");
2251 if (ret < 0) {
2252 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
2253 return ret;
2254 }
2255 sport->port.line = ret;
2256
2257 if (of_get_property(np, "uart-has-rtscts", NULL) ||
2258 of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */)
2259 sport->have_rtscts = 1;
2260
2261 if (of_get_property(np, "fsl,dte-mode", NULL))
2262 sport->dte_mode = 1;
2263
2264 if (of_get_property(np, "rts-gpios", NULL))
2265 sport->have_rtsgpio = 1;
2266
2267 if (of_get_property(np, "fsl,inverted-tx", NULL))
2268 sport->inverted_tx = 1;
2269
2270 if (of_get_property(np, "fsl,inverted-rx", NULL))
2271 sport->inverted_rx = 1;
2272
2273 if (!of_property_read_u32_array(np, "fsl,dma-info", dma_buf_conf, 2)) {
2274 sport->rx_period_length = dma_buf_conf[0];
2275 sport->rx_periods = dma_buf_conf[1];
2276 } else {
2277 sport->rx_period_length = RX_DMA_PERIOD_LEN;
2278 sport->rx_periods = RX_DMA_PERIODS;
2279 }
2280
2281 if (sport->port.line >= ARRAY_SIZE(imx_uart_ports)) {
2282 dev_err(&pdev->dev, "serial%d out of range\n",
2283 sport->port.line);
2284 return -EINVAL;
2285 }
2286
2287 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2288 base = devm_ioremap_resource(&pdev->dev, res);
2289 if (IS_ERR(base))
2290 return PTR_ERR(base);
2291
2292 rxirq = platform_get_irq(pdev, 0);
2293 if (rxirq < 0)
2294 return rxirq;
2295 txirq = platform_get_irq_optional(pdev, 1);
2296 rtsirq = platform_get_irq_optional(pdev, 2);
2297
2298 sport->port.dev = &pdev->dev;
2299 sport->port.mapbase = res->start;
2300 sport->port.membase = base;
2301 sport->port.type = PORT_IMX;
2302 sport->port.iotype = UPIO_MEM;
2303 sport->port.irq = rxirq;
2304 sport->port.fifosize = 32;
2305 sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE);
2306 sport->port.ops = &imx_uart_pops;
2307 sport->port.rs485_config = imx_uart_rs485_config;
2308 /* RTS is required to control the RS485 transmitter */
2309 if (sport->have_rtscts || sport->have_rtsgpio)
2310 sport->port.rs485_supported = imx_rs485_supported;
2311 else
2312 sport->port.rs485_supported = imx_no_rs485;
2313 sport->port.flags = UPF_BOOT_AUTOCONF;
2314 timer_setup(&sport->timer, imx_uart_timeout, 0);
2315
2316 sport->gpios = mctrl_gpio_init(&sport->port, 0);
2317 if (IS_ERR(sport->gpios))
2318 return PTR_ERR(sport->gpios);
2319
2320 sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
2321 if (IS_ERR(sport->clk_ipg)) {
2322 ret = PTR_ERR(sport->clk_ipg);
2323 dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret);
2324 return ret;
2325 }
2326
2327 sport->clk_per = devm_clk_get(&pdev->dev, "per");
2328 if (IS_ERR(sport->clk_per)) {
2329 ret = PTR_ERR(sport->clk_per);
2330 dev_err(&pdev->dev, "failed to get per clk: %d\n", ret);
2331 return ret;
2332 }
2333
2334 sport->port.uartclk = clk_get_rate(sport->clk_per);
2335
2336 /* For register access, we only need to enable the ipg clock. */
2337 ret = clk_prepare_enable(sport->clk_ipg);
2338 if (ret) {
2339 dev_err(&pdev->dev, "failed to enable per clk: %d\n", ret);
2340 return ret;
2341 }
2342
2343 /* initialize shadow register values */
2344 sport->ucr1 = readl(sport->port.membase + UCR1);
2345 sport->ucr2 = readl(sport->port.membase + UCR2);
2346 sport->ucr3 = readl(sport->port.membase + UCR3);
2347 sport->ucr4 = readl(sport->port.membase + UCR4);
2348 sport->ufcr = readl(sport->port.membase + UFCR);
2349
2350 ret = uart_get_rs485_mode(&sport->port);
2351 if (ret) {
2352 clk_disable_unprepare(sport->clk_ipg);
2353 return ret;
2354 }
2355
2356 if (sport->port.rs485.flags & SER_RS485_ENABLED &&
2357 (!sport->have_rtscts && !sport->have_rtsgpio))
2358 dev_err(&pdev->dev, "no RTS control, disabling rs485\n");
2359
2360 /*
2361 * If using the i.MX UART RTS/CTS control then the RTS (CTS_B)
2362 * signal cannot be set low during transmission in case the
2363 * receiver is off (limitation of the i.MX UART IP).
2364 */
2365 if (sport->port.rs485.flags & SER_RS485_ENABLED &&
2366 sport->have_rtscts && !sport->have_rtsgpio &&
2367 (!(sport->port.rs485.flags & SER_RS485_RTS_ON_SEND) &&
2368 !(sport->port.rs485.flags & SER_RS485_RX_DURING_TX)))
2369 dev_err(&pdev->dev,
2370 "low-active RTS not possible when receiver is off, enabling receiver\n");
2371
2372 /* Disable interrupts before requesting them */
2373 ucr1 = imx_uart_readl(sport, UCR1);
2374 ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN);
2375 imx_uart_writel(sport, ucr1, UCR1);
2376
2377 /*
2378 * In case RS485 is enabled without GPIO RTS control, the UART IP
2379 * is used to control CTS signal. Keep both the UART and Receiver
2380 * enabled, otherwise the UART IP pulls CTS signal always HIGH no
2381 * matter how the UCR2 CTSC and CTS bits are set. To prevent any
2382 * data from being fed into the RX FIFO, enable loopback mode in
2383 * UTS register, which disconnects the RX path from external RXD
2384 * pin and connects it to the Transceiver, which is disabled, so
2385 * no data can be fed to the RX FIFO that way.
2386 */
2387 if (sport->port.rs485.flags & SER_RS485_ENABLED &&
2388 sport->have_rtscts && !sport->have_rtsgpio) {
2389 uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
2390 uts |= UTS_LOOP;
2391 imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
2392
2393 ucr1 = imx_uart_readl(sport, UCR1);
2394 ucr1 |= UCR1_UARTEN;
2395 imx_uart_writel(sport, ucr1, UCR1);
2396
2397 ucr2 = imx_uart_readl(sport, UCR2);
2398 ucr2 |= UCR2_RXEN;
2399 imx_uart_writel(sport, ucr2, UCR2);
2400 }
2401
2402 if (!imx_uart_is_imx1(sport) && sport->dte_mode) {
2403 /*
2404 * The DCEDTE bit changes the direction of DSR, DCD, DTR and RI
2405 * and influences if UCR3_RI and UCR3_DCD changes the level of RI
2406 * and DCD (when they are outputs) or enables the respective
2407 * irqs. So set this bit early, i.e. before requesting irqs.
2408 */
2409 u32 ufcr = imx_uart_readl(sport, UFCR);
2410 if (!(ufcr & UFCR_DCEDTE))
2411 imx_uart_writel(sport, ufcr | UFCR_DCEDTE, UFCR);
2412
2413 /*
2414 * Disable UCR3_RI and UCR3_DCD irqs. They are also not
2415 * enabled later because they cannot be cleared
2416 * (confirmed on i.MX25) which makes them unusable.
2417 */
2418 imx_uart_writel(sport,
2419 IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP | UCR3_DSR,
2420 UCR3);
2421
2422 } else {
2423 u32 ucr3 = UCR3_DSR;
2424 u32 ufcr = imx_uart_readl(sport, UFCR);
2425 if (ufcr & UFCR_DCEDTE)
2426 imx_uart_writel(sport, ufcr & ~UFCR_DCEDTE, UFCR);
2427
2428 if (!imx_uart_is_imx1(sport))
2429 ucr3 |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP;
2430 imx_uart_writel(sport, ucr3, UCR3);
2431 }
2432
2433 clk_disable_unprepare(sport->clk_ipg);
2434
2435 hrtimer_init(&sport->trigger_start_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
2436 hrtimer_init(&sport->trigger_stop_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
2437 sport->trigger_start_tx.function = imx_trigger_start_tx;
2438 sport->trigger_stop_tx.function = imx_trigger_stop_tx;
2439
2440 /*
2441 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
2442 * chips only have one interrupt.
2443 */
2444 if (txirq > 0) {
2445 ret = devm_request_irq(&pdev->dev, rxirq, imx_uart_rxint, 0,
2446 dev_name(&pdev->dev), sport);
2447 if (ret) {
2448 dev_err(&pdev->dev, "failed to request rx irq: %d\n",
2449 ret);
2450 return ret;
2451 }
2452
2453 ret = devm_request_irq(&pdev->dev, txirq, imx_uart_txint, 0,
2454 dev_name(&pdev->dev), sport);
2455 if (ret) {
2456 dev_err(&pdev->dev, "failed to request tx irq: %d\n",
2457 ret);
2458 return ret;
2459 }
2460
2461 ret = devm_request_irq(&pdev->dev, rtsirq, imx_uart_rtsint, 0,
2462 dev_name(&pdev->dev), sport);
2463 if (ret) {
2464 dev_err(&pdev->dev, "failed to request rts irq: %d\n",
2465 ret);
2466 return ret;
2467 }
2468 } else {
2469 ret = devm_request_irq(&pdev->dev, rxirq, imx_uart_int, 0,
2470 dev_name(&pdev->dev), sport);
2471 if (ret) {
2472 dev_err(&pdev->dev, "failed to request irq: %d\n", ret);
2473 return ret;
2474 }
2475 }
2476
2477 imx_uart_ports[sport->port.line] = sport;
2478
2479 platform_set_drvdata(pdev, sport);
2480
2481 return uart_add_one_port(&imx_uart_uart_driver, &sport->port);
2482}
2483
2484static int imx_uart_remove(struct platform_device *pdev)
2485{
2486 struct imx_port *sport = platform_get_drvdata(pdev);
2487
2488 return uart_remove_one_port(&imx_uart_uart_driver, &sport->port);
2489}
2490
2491static void imx_uart_restore_context(struct imx_port *sport)
2492{
2493 unsigned long flags;
2494
2495 spin_lock_irqsave(&sport->port.lock, flags);
2496 if (!sport->context_saved) {
2497 spin_unlock_irqrestore(&sport->port.lock, flags);
2498 return;
2499 }
2500
2501 imx_uart_writel(sport, sport->saved_reg[4], UFCR);
2502 imx_uart_writel(sport, sport->saved_reg[5], UESC);
2503 imx_uart_writel(sport, sport->saved_reg[6], UTIM);
2504 imx_uart_writel(sport, sport->saved_reg[7], UBIR);
2505 imx_uart_writel(sport, sport->saved_reg[8], UBMR);
2506 imx_uart_writel(sport, sport->saved_reg[9], IMX21_UTS);
2507 imx_uart_writel(sport, sport->saved_reg[0], UCR1);
2508 imx_uart_writel(sport, sport->saved_reg[1] | UCR2_SRST, UCR2);
2509 imx_uart_writel(sport, sport->saved_reg[2], UCR3);
2510 imx_uart_writel(sport, sport->saved_reg[3], UCR4);
2511 sport->context_saved = false;
2512 spin_unlock_irqrestore(&sport->port.lock, flags);
2513}
2514
2515static void imx_uart_save_context(struct imx_port *sport)
2516{
2517 unsigned long flags;
2518
2519 /* Save necessary regs */
2520 spin_lock_irqsave(&sport->port.lock, flags);
2521 sport->saved_reg[0] = imx_uart_readl(sport, UCR1);
2522 sport->saved_reg[1] = imx_uart_readl(sport, UCR2);
2523 sport->saved_reg[2] = imx_uart_readl(sport, UCR3);
2524 sport->saved_reg[3] = imx_uart_readl(sport, UCR4);
2525 sport->saved_reg[4] = imx_uart_readl(sport, UFCR);
2526 sport->saved_reg[5] = imx_uart_readl(sport, UESC);
2527 sport->saved_reg[6] = imx_uart_readl(sport, UTIM);
2528 sport->saved_reg[7] = imx_uart_readl(sport, UBIR);
2529 sport->saved_reg[8] = imx_uart_readl(sport, UBMR);
2530 sport->saved_reg[9] = imx_uart_readl(sport, IMX21_UTS);
2531 sport->context_saved = true;
2532 spin_unlock_irqrestore(&sport->port.lock, flags);
2533}
2534
2535static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
2536{
2537 u32 ucr3;
2538
2539 ucr3 = imx_uart_readl(sport, UCR3);
2540 if (on) {
2541 imx_uart_writel(sport, USR1_AWAKE, USR1);
2542 ucr3 |= UCR3_AWAKEN;
2543 } else {
2544 ucr3 &= ~UCR3_AWAKEN;
2545 }
2546 imx_uart_writel(sport, ucr3, UCR3);
2547
2548 if (sport->have_rtscts) {
2549 u32 ucr1 = imx_uart_readl(sport, UCR1);
2550 if (on) {
2551 imx_uart_writel(sport, USR1_RTSD, USR1);
2552 ucr1 |= UCR1_RTSDEN;
2553 } else {
2554 ucr1 &= ~UCR1_RTSDEN;
2555 }
2556 imx_uart_writel(sport, ucr1, UCR1);
2557 }
2558}
2559
2560static int imx_uart_suspend_noirq(struct device *dev)
2561{
2562 struct imx_port *sport = dev_get_drvdata(dev);
2563
2564 imx_uart_save_context(sport);
2565
2566 clk_disable(sport->clk_ipg);
2567
2568 pinctrl_pm_select_sleep_state(dev);
2569
2570 return 0;
2571}
2572
2573static int imx_uart_resume_noirq(struct device *dev)
2574{
2575 struct imx_port *sport = dev_get_drvdata(dev);
2576 int ret;
2577
2578 pinctrl_pm_select_default_state(dev);
2579
2580 ret = clk_enable(sport->clk_ipg);
2581 if (ret)
2582 return ret;
2583
2584 imx_uart_restore_context(sport);
2585
2586 return 0;
2587}
2588
2589static int imx_uart_suspend(struct device *dev)
2590{
2591 struct imx_port *sport = dev_get_drvdata(dev);
2592 int ret;
2593
2594 uart_suspend_port(&imx_uart_uart_driver, &sport->port);
2595 disable_irq(sport->port.irq);
2596
2597 ret = clk_prepare_enable(sport->clk_ipg);
2598 if (ret)
2599 return ret;
2600
2601 /* enable wakeup from i.MX UART */
2602 imx_uart_enable_wakeup(sport, true);
2603
2604 return 0;
2605}
2606
2607static int imx_uart_resume(struct device *dev)
2608{
2609 struct imx_port *sport = dev_get_drvdata(dev);
2610
2611 /* disable wakeup from i.MX UART */
2612 imx_uart_enable_wakeup(sport, false);
2613
2614 uart_resume_port(&imx_uart_uart_driver, &sport->port);
2615 enable_irq(sport->port.irq);
2616
2617 clk_disable_unprepare(sport->clk_ipg);
2618
2619 return 0;
2620}
2621
2622static int imx_uart_freeze(struct device *dev)
2623{
2624 struct imx_port *sport = dev_get_drvdata(dev);
2625
2626 uart_suspend_port(&imx_uart_uart_driver, &sport->port);
2627
2628 return clk_prepare_enable(sport->clk_ipg);
2629}
2630
2631static int imx_uart_thaw(struct device *dev)
2632{
2633 struct imx_port *sport = dev_get_drvdata(dev);
2634
2635 uart_resume_port(&imx_uart_uart_driver, &sport->port);
2636
2637 clk_disable_unprepare(sport->clk_ipg);
2638
2639 return 0;
2640}
2641
2642static const struct dev_pm_ops imx_uart_pm_ops = {
2643 .suspend_noirq = imx_uart_suspend_noirq,
2644 .resume_noirq = imx_uart_resume_noirq,
2645 .freeze_noirq = imx_uart_suspend_noirq,
2646 .thaw_noirq = imx_uart_resume_noirq,
2647 .restore_noirq = imx_uart_resume_noirq,
2648 .suspend = imx_uart_suspend,
2649 .resume = imx_uart_resume,
2650 .freeze = imx_uart_freeze,
2651 .thaw = imx_uart_thaw,
2652 .restore = imx_uart_thaw,
2653};
2654
2655static struct platform_driver imx_uart_platform_driver = {
2656 .probe = imx_uart_probe,
2657 .remove = imx_uart_remove,
2658
2659 .driver = {
2660 .name = "imx-uart",
2661 .of_match_table = imx_uart_dt_ids,
2662 .pm = &imx_uart_pm_ops,
2663 },
2664};
2665
2666static int __init imx_uart_init(void)
2667{
2668 int ret = uart_register_driver(&imx_uart_uart_driver);
2669
2670 if (ret)
2671 return ret;
2672
2673 ret = platform_driver_register(&imx_uart_platform_driver);
2674 if (ret != 0)
2675 uart_unregister_driver(&imx_uart_uart_driver);
2676
2677 return ret;
2678}
2679
2680static void __exit imx_uart_exit(void)
2681{
2682 platform_driver_unregister(&imx_uart_platform_driver);
2683 uart_unregister_driver(&imx_uart_uart_driver);
2684}
2685
2686module_init(imx_uart_init);
2687module_exit(imx_uart_exit);
2688
2689MODULE_AUTHOR("Sascha Hauer");
2690MODULE_DESCRIPTION("IMX generic serial port driver");
2691MODULE_LICENSE("GPL");
2692MODULE_ALIAS("platform:imx-uart");