Loading...
Note: File does not exist in v3.1.
1/* SPDX-License-Identifier: ISC */
2/*
3 * Copyright (c) 2005-2011 Atheros Communications Inc.
4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
6 */
7
8#ifndef _WMI_H_
9#define _WMI_H_
10
11#include <linux/types.h>
12#include <linux/ieee80211.h>
13
14/*
15 * This file specifies the WMI interface for the Unified Software
16 * Architecture.
17 *
18 * It includes definitions of all the commands and events. Commands are
19 * messages from the host to the target. Events and Replies are messages
20 * from the target to the host.
21 *
22 * Ownership of correctness in regards to WMI commands belongs to the host
23 * driver and the target is not required to validate parameters for value,
24 * proper range, or any other checking.
25 *
26 * Guidelines for extending this interface are below.
27 *
28 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
29 *
30 * 2. Use ONLY u32 type for defining member variables within WMI
31 * command/event structures. Do not use u8, u16, bool or
32 * enum types within these structures.
33 *
34 * 3. DO NOT define bit fields within structures. Implement bit fields
35 * using masks if necessary. Do not use the programming language's bit
36 * field definition.
37 *
38 * 4. Define macros for encode/decode of u8, u16 fields within
39 * the u32 variables. Use these macros for set/get of these fields.
40 * Try to use this to optimize the structure without bloating it with
41 * u32 variables for every lower sized field.
42 *
43 * 5. Do not use PACK/UNPACK attributes for the structures as each member
44 * variable is already 4-byte aligned by virtue of being a u32
45 * type.
46 *
47 * 6. Comment each parameter part of the WMI command/event structure by
48 * using the 2 stars at the beginning of C comment instead of one star to
49 * enable HTML document generation using Doxygen.
50 *
51 */
52
53/* Control Path */
54struct wmi_cmd_hdr {
55 __le32 cmd_id;
56} __packed;
57
58#define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF
59#define WMI_CMD_HDR_CMD_ID_LSB 0
60#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
61#define WMI_CMD_HDR_PLT_PRIV_LSB 24
62
63#define HTC_PROTOCOL_VERSION 0x0002
64#define WMI_PROTOCOL_VERSION 0x0002
65
66/*
67 * There is no signed version of __le32, so for a temporary solution come
68 * up with our own version. The idea is from fs/ntfs/endian.h.
69 *
70 * Use a_ prefix so that it doesn't conflict if we get proper support to
71 * linux/types.h.
72 */
73typedef __s32 __bitwise a_sle32;
74
75static inline a_sle32 a_cpu_to_sle32(s32 val)
76{
77 return (__force a_sle32)cpu_to_le32(val);
78}
79
80static inline s32 a_sle32_to_cpu(a_sle32 val)
81{
82 return le32_to_cpu((__force __le32)val);
83}
84
85enum wmi_service {
86 WMI_SERVICE_BEACON_OFFLOAD = 0,
87 WMI_SERVICE_SCAN_OFFLOAD,
88 WMI_SERVICE_ROAM_OFFLOAD,
89 WMI_SERVICE_BCN_MISS_OFFLOAD,
90 WMI_SERVICE_STA_PWRSAVE,
91 WMI_SERVICE_STA_ADVANCED_PWRSAVE,
92 WMI_SERVICE_AP_UAPSD,
93 WMI_SERVICE_AP_DFS,
94 WMI_SERVICE_11AC,
95 WMI_SERVICE_BLOCKACK,
96 WMI_SERVICE_PHYERR,
97 WMI_SERVICE_BCN_FILTER,
98 WMI_SERVICE_RTT,
99 WMI_SERVICE_RATECTRL,
100 WMI_SERVICE_WOW,
101 WMI_SERVICE_RATECTRL_CACHE,
102 WMI_SERVICE_IRAM_TIDS,
103 WMI_SERVICE_ARPNS_OFFLOAD,
104 WMI_SERVICE_NLO,
105 WMI_SERVICE_GTK_OFFLOAD,
106 WMI_SERVICE_SCAN_SCH,
107 WMI_SERVICE_CSA_OFFLOAD,
108 WMI_SERVICE_CHATTER,
109 WMI_SERVICE_COEX_FREQAVOID,
110 WMI_SERVICE_PACKET_POWER_SAVE,
111 WMI_SERVICE_FORCE_FW_HANG,
112 WMI_SERVICE_GPIO,
113 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
114 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
115 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
116 WMI_SERVICE_STA_KEEP_ALIVE,
117 WMI_SERVICE_TX_ENCAP,
118 WMI_SERVICE_BURST,
119 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
120 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
121 WMI_SERVICE_ROAM_SCAN_OFFLOAD,
122 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
123 WMI_SERVICE_EARLY_RX,
124 WMI_SERVICE_STA_SMPS,
125 WMI_SERVICE_FWTEST,
126 WMI_SERVICE_STA_WMMAC,
127 WMI_SERVICE_TDLS,
128 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
129 WMI_SERVICE_ADAPTIVE_OCS,
130 WMI_SERVICE_BA_SSN_SUPPORT,
131 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
132 WMI_SERVICE_WLAN_HB,
133 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
134 WMI_SERVICE_BATCH_SCAN,
135 WMI_SERVICE_QPOWER,
136 WMI_SERVICE_PLMREQ,
137 WMI_SERVICE_THERMAL_MGMT,
138 WMI_SERVICE_RMC,
139 WMI_SERVICE_MHF_OFFLOAD,
140 WMI_SERVICE_COEX_SAR,
141 WMI_SERVICE_BCN_TXRATE_OVERRIDE,
142 WMI_SERVICE_NAN,
143 WMI_SERVICE_L1SS_STAT,
144 WMI_SERVICE_ESTIMATE_LINKSPEED,
145 WMI_SERVICE_OBSS_SCAN,
146 WMI_SERVICE_TDLS_OFFCHAN,
147 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
148 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
149 WMI_SERVICE_IBSS_PWRSAVE,
150 WMI_SERVICE_LPASS,
151 WMI_SERVICE_EXTSCAN,
152 WMI_SERVICE_D0WOW,
153 WMI_SERVICE_HSOFFLOAD,
154 WMI_SERVICE_ROAM_HO_OFFLOAD,
155 WMI_SERVICE_RX_FULL_REORDER,
156 WMI_SERVICE_DHCP_OFFLOAD,
157 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
158 WMI_SERVICE_MDNS_OFFLOAD,
159 WMI_SERVICE_SAP_AUTH_OFFLOAD,
160 WMI_SERVICE_ATF,
161 WMI_SERVICE_COEX_GPIO,
162 WMI_SERVICE_ENHANCED_PROXY_STA,
163 WMI_SERVICE_TT,
164 WMI_SERVICE_PEER_CACHING,
165 WMI_SERVICE_AUX_SPECTRAL_INTF,
166 WMI_SERVICE_AUX_CHAN_LOAD_INTF,
167 WMI_SERVICE_BSS_CHANNEL_INFO_64,
168 WMI_SERVICE_EXT_RES_CFG_SUPPORT,
169 WMI_SERVICE_MESH_11S,
170 WMI_SERVICE_MESH_NON_11S,
171 WMI_SERVICE_PEER_STATS,
172 WMI_SERVICE_RESTRT_CHNL_SUPPORT,
173 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
174 WMI_SERVICE_TX_MODE_PUSH_ONLY,
175 WMI_SERVICE_TX_MODE_PUSH_PULL,
176 WMI_SERVICE_TX_MODE_DYNAMIC,
177 WMI_SERVICE_VDEV_RX_FILTER,
178 WMI_SERVICE_BTCOEX,
179 WMI_SERVICE_CHECK_CAL_VERSION,
180 WMI_SERVICE_DBGLOG_WARN2,
181 WMI_SERVICE_BTCOEX_DUTY_CYCLE,
182 WMI_SERVICE_4_WIRE_COEX_SUPPORT,
183 WMI_SERVICE_EXTENDED_NSS_SUPPORT,
184 WMI_SERVICE_PROG_GPIO_BAND_SELECT,
185 WMI_SERVICE_SMART_LOGGING_SUPPORT,
186 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
187 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
188 WMI_SERVICE_MGMT_TX_WMI,
189 WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
190 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
191 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
192 WMI_SERVICE_TPC_STATS_FINAL,
193 WMI_SERVICE_RESET_CHIP,
194 WMI_SERVICE_SPOOF_MAC_SUPPORT,
195 WMI_SERVICE_TX_DATA_ACK_RSSI,
196 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
197 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
198 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
199 WMI_SERVICE_THERM_THROT,
200 WMI_SERVICE_RTT_RESPONDER_ROLE,
201 WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
202 WMI_SERVICE_REPORT_AIRTIME,
203 WMI_SERVICE_SYNC_DELETE_CMDS,
204 WMI_SERVICE_TX_PWR_PER_PEER,
205 WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
206 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
207 WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
208
209 /* Remember to add the new value to wmi_service_name()! */
210
211 /* keep last */
212 WMI_SERVICE_MAX,
213};
214
215enum wmi_10x_service {
216 WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
217 WMI_10X_SERVICE_SCAN_OFFLOAD,
218 WMI_10X_SERVICE_ROAM_OFFLOAD,
219 WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
220 WMI_10X_SERVICE_STA_PWRSAVE,
221 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
222 WMI_10X_SERVICE_AP_UAPSD,
223 WMI_10X_SERVICE_AP_DFS,
224 WMI_10X_SERVICE_11AC,
225 WMI_10X_SERVICE_BLOCKACK,
226 WMI_10X_SERVICE_PHYERR,
227 WMI_10X_SERVICE_BCN_FILTER,
228 WMI_10X_SERVICE_RTT,
229 WMI_10X_SERVICE_RATECTRL,
230 WMI_10X_SERVICE_WOW,
231 WMI_10X_SERVICE_RATECTRL_CACHE,
232 WMI_10X_SERVICE_IRAM_TIDS,
233 WMI_10X_SERVICE_BURST,
234
235 /* introduced in 10.2 */
236 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
237 WMI_10X_SERVICE_FORCE_FW_HANG,
238 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
239 WMI_10X_SERVICE_ATF,
240 WMI_10X_SERVICE_COEX_GPIO,
241 WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
242 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
243 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
244 WMI_10X_SERVICE_MESH,
245 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
246 WMI_10X_SERVICE_PEER_STATS,
247 WMI_10X_SERVICE_RESET_CHIP,
248 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
249 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
250 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
251 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
252};
253
254enum wmi_main_service {
255 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
256 WMI_MAIN_SERVICE_SCAN_OFFLOAD,
257 WMI_MAIN_SERVICE_ROAM_OFFLOAD,
258 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
259 WMI_MAIN_SERVICE_STA_PWRSAVE,
260 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
261 WMI_MAIN_SERVICE_AP_UAPSD,
262 WMI_MAIN_SERVICE_AP_DFS,
263 WMI_MAIN_SERVICE_11AC,
264 WMI_MAIN_SERVICE_BLOCKACK,
265 WMI_MAIN_SERVICE_PHYERR,
266 WMI_MAIN_SERVICE_BCN_FILTER,
267 WMI_MAIN_SERVICE_RTT,
268 WMI_MAIN_SERVICE_RATECTRL,
269 WMI_MAIN_SERVICE_WOW,
270 WMI_MAIN_SERVICE_RATECTRL_CACHE,
271 WMI_MAIN_SERVICE_IRAM_TIDS,
272 WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
273 WMI_MAIN_SERVICE_NLO,
274 WMI_MAIN_SERVICE_GTK_OFFLOAD,
275 WMI_MAIN_SERVICE_SCAN_SCH,
276 WMI_MAIN_SERVICE_CSA_OFFLOAD,
277 WMI_MAIN_SERVICE_CHATTER,
278 WMI_MAIN_SERVICE_COEX_FREQAVOID,
279 WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
280 WMI_MAIN_SERVICE_FORCE_FW_HANG,
281 WMI_MAIN_SERVICE_GPIO,
282 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
283 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
284 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
285 WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
286 WMI_MAIN_SERVICE_TX_ENCAP,
287};
288
289enum wmi_10_4_service {
290 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
291 WMI_10_4_SERVICE_SCAN_OFFLOAD,
292 WMI_10_4_SERVICE_ROAM_OFFLOAD,
293 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
294 WMI_10_4_SERVICE_STA_PWRSAVE,
295 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
296 WMI_10_4_SERVICE_AP_UAPSD,
297 WMI_10_4_SERVICE_AP_DFS,
298 WMI_10_4_SERVICE_11AC,
299 WMI_10_4_SERVICE_BLOCKACK,
300 WMI_10_4_SERVICE_PHYERR,
301 WMI_10_4_SERVICE_BCN_FILTER,
302 WMI_10_4_SERVICE_RTT,
303 WMI_10_4_SERVICE_RATECTRL,
304 WMI_10_4_SERVICE_WOW,
305 WMI_10_4_SERVICE_RATECTRL_CACHE,
306 WMI_10_4_SERVICE_IRAM_TIDS,
307 WMI_10_4_SERVICE_BURST,
308 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
309 WMI_10_4_SERVICE_GTK_OFFLOAD,
310 WMI_10_4_SERVICE_SCAN_SCH,
311 WMI_10_4_SERVICE_CSA_OFFLOAD,
312 WMI_10_4_SERVICE_CHATTER,
313 WMI_10_4_SERVICE_COEX_FREQAVOID,
314 WMI_10_4_SERVICE_PACKET_POWER_SAVE,
315 WMI_10_4_SERVICE_FORCE_FW_HANG,
316 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
317 WMI_10_4_SERVICE_GPIO,
318 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
319 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
320 WMI_10_4_SERVICE_STA_KEEP_ALIVE,
321 WMI_10_4_SERVICE_TX_ENCAP,
322 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
323 WMI_10_4_SERVICE_EARLY_RX,
324 WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
325 WMI_10_4_SERVICE_TT,
326 WMI_10_4_SERVICE_ATF,
327 WMI_10_4_SERVICE_PEER_CACHING,
328 WMI_10_4_SERVICE_COEX_GPIO,
329 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
330 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
331 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
332 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
333 WMI_10_4_SERVICE_MESH_NON_11S,
334 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
335 WMI_10_4_SERVICE_PEER_STATS,
336 WMI_10_4_SERVICE_MESH_11S,
337 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
338 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
339 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
340 WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
341 WMI_10_4_SERVICE_VDEV_RX_FILTER,
342 WMI_10_4_SERVICE_BTCOEX,
343 WMI_10_4_SERVICE_CHECK_CAL_VERSION,
344 WMI_10_4_SERVICE_DBGLOG_WARN2,
345 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
346 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
347 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
348 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
349 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
350 WMI_10_4_SERVICE_TDLS,
351 WMI_10_4_SERVICE_TDLS_OFFCHAN,
352 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
353 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
354 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
355 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
356 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
357 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
358 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
359 WMI_10_4_SERVICE_TPC_STATS_FINAL,
360 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
361 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
362 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
363 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
364 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
365 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
366 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
367 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
368 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
369 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
370 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
371 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
372 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
373 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
374 WMI_10_4_SERVICE_REPORT_AIRTIME,
375 WMI_10_4_SERVICE_TX_PWR_PER_PEER,
376 WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
377 WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
378 WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
379 WMI_10_4_SERVICE_QINQ_SUPPORT,
380 WMI_10_4_SERVICE_RESET_CHIP,
381};
382
383static inline char *wmi_service_name(enum wmi_service service_id)
384{
385#define SVCSTR(x) case x: return #x
386
387 switch (service_id) {
388 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
389 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
390 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
391 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
392 SVCSTR(WMI_SERVICE_STA_PWRSAVE);
393 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
394 SVCSTR(WMI_SERVICE_AP_UAPSD);
395 SVCSTR(WMI_SERVICE_AP_DFS);
396 SVCSTR(WMI_SERVICE_11AC);
397 SVCSTR(WMI_SERVICE_BLOCKACK);
398 SVCSTR(WMI_SERVICE_PHYERR);
399 SVCSTR(WMI_SERVICE_BCN_FILTER);
400 SVCSTR(WMI_SERVICE_RTT);
401 SVCSTR(WMI_SERVICE_RATECTRL);
402 SVCSTR(WMI_SERVICE_WOW);
403 SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
404 SVCSTR(WMI_SERVICE_IRAM_TIDS);
405 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
406 SVCSTR(WMI_SERVICE_NLO);
407 SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
408 SVCSTR(WMI_SERVICE_SCAN_SCH);
409 SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
410 SVCSTR(WMI_SERVICE_CHATTER);
411 SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
412 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
413 SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
414 SVCSTR(WMI_SERVICE_GPIO);
415 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
416 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
417 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
418 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
419 SVCSTR(WMI_SERVICE_TX_ENCAP);
420 SVCSTR(WMI_SERVICE_BURST);
421 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
422 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
423 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
424 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
425 SVCSTR(WMI_SERVICE_EARLY_RX);
426 SVCSTR(WMI_SERVICE_STA_SMPS);
427 SVCSTR(WMI_SERVICE_FWTEST);
428 SVCSTR(WMI_SERVICE_STA_WMMAC);
429 SVCSTR(WMI_SERVICE_TDLS);
430 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
431 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
432 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
433 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
434 SVCSTR(WMI_SERVICE_WLAN_HB);
435 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
436 SVCSTR(WMI_SERVICE_BATCH_SCAN);
437 SVCSTR(WMI_SERVICE_QPOWER);
438 SVCSTR(WMI_SERVICE_PLMREQ);
439 SVCSTR(WMI_SERVICE_THERMAL_MGMT);
440 SVCSTR(WMI_SERVICE_RMC);
441 SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
442 SVCSTR(WMI_SERVICE_COEX_SAR);
443 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
444 SVCSTR(WMI_SERVICE_NAN);
445 SVCSTR(WMI_SERVICE_L1SS_STAT);
446 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
447 SVCSTR(WMI_SERVICE_OBSS_SCAN);
448 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
449 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
450 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
451 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
452 SVCSTR(WMI_SERVICE_LPASS);
453 SVCSTR(WMI_SERVICE_EXTSCAN);
454 SVCSTR(WMI_SERVICE_D0WOW);
455 SVCSTR(WMI_SERVICE_HSOFFLOAD);
456 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
457 SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
458 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
459 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
460 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
461 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
462 SVCSTR(WMI_SERVICE_ATF);
463 SVCSTR(WMI_SERVICE_COEX_GPIO);
464 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
465 SVCSTR(WMI_SERVICE_TT);
466 SVCSTR(WMI_SERVICE_PEER_CACHING);
467 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
468 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
469 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
470 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
471 SVCSTR(WMI_SERVICE_MESH_11S);
472 SVCSTR(WMI_SERVICE_MESH_NON_11S);
473 SVCSTR(WMI_SERVICE_PEER_STATS);
474 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
475 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
476 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
477 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
478 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
479 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
480 SVCSTR(WMI_SERVICE_BTCOEX);
481 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
482 SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
483 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
484 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
485 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
486 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
487 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
488 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
489 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
490 SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
491 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
492 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
493 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
494 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
495 SVCSTR(WMI_SERVICE_RESET_CHIP);
496 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
497 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
498 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
499 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
500 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
501 SVCSTR(WMI_SERVICE_THERM_THROT);
502 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
503 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
504 SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
505 SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
506 SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
507 SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
508 SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
509 SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
510
511 case WMI_SERVICE_MAX:
512 return NULL;
513 }
514
515#undef SVCSTR
516
517 return NULL;
518}
519
520#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
521 ((svc_id) < (len) && \
522 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
523 BIT((svc_id) % (sizeof(u32))))
524
525/* This extension is required to accommodate new services, current limit
526 * for wmi_services is 64 as target is using only 4-bits of each 32-bit
527 * wmi_service word. Extending this to make use of remaining unused bits
528 * for new services.
529 */
530#define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
531 ((svc_id) >= (len) && \
532 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
533 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
534
535#define SVCMAP(x, y, len) \
536 do { \
537 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
538 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
539 __set_bit(y, out); \
540 } while (0)
541
542static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
543 size_t len)
544{
545 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
546 WMI_SERVICE_BEACON_OFFLOAD, len);
547 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
548 WMI_SERVICE_SCAN_OFFLOAD, len);
549 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
550 WMI_SERVICE_ROAM_OFFLOAD, len);
551 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
552 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
553 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
554 WMI_SERVICE_STA_PWRSAVE, len);
555 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
556 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
557 SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
558 WMI_SERVICE_AP_UAPSD, len);
559 SVCMAP(WMI_10X_SERVICE_AP_DFS,
560 WMI_SERVICE_AP_DFS, len);
561 SVCMAP(WMI_10X_SERVICE_11AC,
562 WMI_SERVICE_11AC, len);
563 SVCMAP(WMI_10X_SERVICE_BLOCKACK,
564 WMI_SERVICE_BLOCKACK, len);
565 SVCMAP(WMI_10X_SERVICE_PHYERR,
566 WMI_SERVICE_PHYERR, len);
567 SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
568 WMI_SERVICE_BCN_FILTER, len);
569 SVCMAP(WMI_10X_SERVICE_RTT,
570 WMI_SERVICE_RTT, len);
571 SVCMAP(WMI_10X_SERVICE_RATECTRL,
572 WMI_SERVICE_RATECTRL, len);
573 SVCMAP(WMI_10X_SERVICE_WOW,
574 WMI_SERVICE_WOW, len);
575 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
576 WMI_SERVICE_RATECTRL_CACHE, len);
577 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
578 WMI_SERVICE_IRAM_TIDS, len);
579 SVCMAP(WMI_10X_SERVICE_BURST,
580 WMI_SERVICE_BURST, len);
581 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
582 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
583 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
584 WMI_SERVICE_FORCE_FW_HANG, len);
585 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
586 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
587 SVCMAP(WMI_10X_SERVICE_ATF,
588 WMI_SERVICE_ATF, len);
589 SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
590 WMI_SERVICE_COEX_GPIO, len);
591 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
592 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
593 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
594 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
595 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
596 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
597 SVCMAP(WMI_10X_SERVICE_MESH,
598 WMI_SERVICE_MESH_11S, len);
599 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
600 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
601 SVCMAP(WMI_10X_SERVICE_PEER_STATS,
602 WMI_SERVICE_PEER_STATS, len);
603 SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
604 WMI_SERVICE_RESET_CHIP, len);
605 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
606 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
607 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
608 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
609 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
610 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
611}
612
613static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
614 size_t len)
615{
616 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
617 WMI_SERVICE_BEACON_OFFLOAD, len);
618 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
619 WMI_SERVICE_SCAN_OFFLOAD, len);
620 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
621 WMI_SERVICE_ROAM_OFFLOAD, len);
622 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
623 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
624 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
625 WMI_SERVICE_STA_PWRSAVE, len);
626 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
627 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
628 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
629 WMI_SERVICE_AP_UAPSD, len);
630 SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
631 WMI_SERVICE_AP_DFS, len);
632 SVCMAP(WMI_MAIN_SERVICE_11AC,
633 WMI_SERVICE_11AC, len);
634 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
635 WMI_SERVICE_BLOCKACK, len);
636 SVCMAP(WMI_MAIN_SERVICE_PHYERR,
637 WMI_SERVICE_PHYERR, len);
638 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
639 WMI_SERVICE_BCN_FILTER, len);
640 SVCMAP(WMI_MAIN_SERVICE_RTT,
641 WMI_SERVICE_RTT, len);
642 SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
643 WMI_SERVICE_RATECTRL, len);
644 SVCMAP(WMI_MAIN_SERVICE_WOW,
645 WMI_SERVICE_WOW, len);
646 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
647 WMI_SERVICE_RATECTRL_CACHE, len);
648 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
649 WMI_SERVICE_IRAM_TIDS, len);
650 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
651 WMI_SERVICE_ARPNS_OFFLOAD, len);
652 SVCMAP(WMI_MAIN_SERVICE_NLO,
653 WMI_SERVICE_NLO, len);
654 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
655 WMI_SERVICE_GTK_OFFLOAD, len);
656 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
657 WMI_SERVICE_SCAN_SCH, len);
658 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
659 WMI_SERVICE_CSA_OFFLOAD, len);
660 SVCMAP(WMI_MAIN_SERVICE_CHATTER,
661 WMI_SERVICE_CHATTER, len);
662 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
663 WMI_SERVICE_COEX_FREQAVOID, len);
664 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
665 WMI_SERVICE_PACKET_POWER_SAVE, len);
666 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
667 WMI_SERVICE_FORCE_FW_HANG, len);
668 SVCMAP(WMI_MAIN_SERVICE_GPIO,
669 WMI_SERVICE_GPIO, len);
670 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
671 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
672 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
673 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
674 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
675 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
676 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
677 WMI_SERVICE_STA_KEEP_ALIVE, len);
678 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
679 WMI_SERVICE_TX_ENCAP, len);
680}
681
682static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
683 size_t len)
684{
685 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
686 WMI_SERVICE_BEACON_OFFLOAD, len);
687 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
688 WMI_SERVICE_SCAN_OFFLOAD, len);
689 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
690 WMI_SERVICE_ROAM_OFFLOAD, len);
691 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
692 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
693 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
694 WMI_SERVICE_STA_PWRSAVE, len);
695 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
696 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
697 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
698 WMI_SERVICE_AP_UAPSD, len);
699 SVCMAP(WMI_10_4_SERVICE_AP_DFS,
700 WMI_SERVICE_AP_DFS, len);
701 SVCMAP(WMI_10_4_SERVICE_11AC,
702 WMI_SERVICE_11AC, len);
703 SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
704 WMI_SERVICE_BLOCKACK, len);
705 SVCMAP(WMI_10_4_SERVICE_PHYERR,
706 WMI_SERVICE_PHYERR, len);
707 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
708 WMI_SERVICE_BCN_FILTER, len);
709 SVCMAP(WMI_10_4_SERVICE_RTT,
710 WMI_SERVICE_RTT, len);
711 SVCMAP(WMI_10_4_SERVICE_RATECTRL,
712 WMI_SERVICE_RATECTRL, len);
713 SVCMAP(WMI_10_4_SERVICE_WOW,
714 WMI_SERVICE_WOW, len);
715 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
716 WMI_SERVICE_RATECTRL_CACHE, len);
717 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
718 WMI_SERVICE_IRAM_TIDS, len);
719 SVCMAP(WMI_10_4_SERVICE_BURST,
720 WMI_SERVICE_BURST, len);
721 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
722 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
723 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
724 WMI_SERVICE_GTK_OFFLOAD, len);
725 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
726 WMI_SERVICE_SCAN_SCH, len);
727 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
728 WMI_SERVICE_CSA_OFFLOAD, len);
729 SVCMAP(WMI_10_4_SERVICE_CHATTER,
730 WMI_SERVICE_CHATTER, len);
731 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
732 WMI_SERVICE_COEX_FREQAVOID, len);
733 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
734 WMI_SERVICE_PACKET_POWER_SAVE, len);
735 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
736 WMI_SERVICE_FORCE_FW_HANG, len);
737 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
738 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
739 SVCMAP(WMI_10_4_SERVICE_GPIO,
740 WMI_SERVICE_GPIO, len);
741 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
742 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
743 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
744 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
745 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
746 WMI_SERVICE_STA_KEEP_ALIVE, len);
747 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
748 WMI_SERVICE_TX_ENCAP, len);
749 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
750 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
751 SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
752 WMI_SERVICE_EARLY_RX, len);
753 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
754 WMI_SERVICE_ENHANCED_PROXY_STA, len);
755 SVCMAP(WMI_10_4_SERVICE_TT,
756 WMI_SERVICE_TT, len);
757 SVCMAP(WMI_10_4_SERVICE_ATF,
758 WMI_SERVICE_ATF, len);
759 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
760 WMI_SERVICE_PEER_CACHING, len);
761 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
762 WMI_SERVICE_COEX_GPIO, len);
763 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
764 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
765 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
766 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
767 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
768 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
769 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
770 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
771 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
772 WMI_SERVICE_MESH_NON_11S, len);
773 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
774 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
775 SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
776 WMI_SERVICE_PEER_STATS, len);
777 SVCMAP(WMI_10_4_SERVICE_MESH_11S,
778 WMI_SERVICE_MESH_11S, len);
779 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
780 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
781 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
782 WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
783 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
784 WMI_SERVICE_TX_MODE_PUSH_PULL, len);
785 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
786 WMI_SERVICE_TX_MODE_DYNAMIC, len);
787 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
788 WMI_SERVICE_VDEV_RX_FILTER, len);
789 SVCMAP(WMI_10_4_SERVICE_BTCOEX,
790 WMI_SERVICE_BTCOEX, len);
791 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
792 WMI_SERVICE_CHECK_CAL_VERSION, len);
793 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
794 WMI_SERVICE_DBGLOG_WARN2, len);
795 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
796 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
797 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
798 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
799 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
800 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
801 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
802 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
803 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
804 WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
805 SVCMAP(WMI_10_4_SERVICE_TDLS,
806 WMI_SERVICE_TDLS, len);
807 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
808 WMI_SERVICE_TDLS_OFFCHAN, len);
809 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
810 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
811 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
812 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
813 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
814 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
815 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
816 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
817 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
818 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
819 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
820 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
821 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
822 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
823 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
824 WMI_SERVICE_TPC_STATS_FINAL, len);
825 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
826 WMI_SERVICE_TX_DATA_ACK_RSSI, len);
827 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
828 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
829 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
830 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
831 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
832 WMI_SERVICE_RTT_RESPONDER_ROLE, len);
833 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
834 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
835 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
836 WMI_SERVICE_REPORT_AIRTIME, len);
837 SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
838 WMI_SERVICE_TX_PWR_PER_PEER, len);
839 SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
840 WMI_SERVICE_RESET_CHIP, len);
841 SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
842 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
843 SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
844 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
845}
846
847#undef SVCMAP
848
849/* 2 word representation of MAC addr */
850struct wmi_mac_addr {
851 union {
852 u8 addr[6];
853 struct {
854 u32 word0;
855 u32 word1;
856 } __packed;
857 } __packed;
858} __packed;
859
860struct wmi_cmd_map {
861 u32 init_cmdid;
862 u32 start_scan_cmdid;
863 u32 stop_scan_cmdid;
864 u32 scan_chan_list_cmdid;
865 u32 scan_sch_prio_tbl_cmdid;
866 u32 scan_prob_req_oui_cmdid;
867 u32 pdev_set_regdomain_cmdid;
868 u32 pdev_set_channel_cmdid;
869 u32 pdev_set_param_cmdid;
870 u32 pdev_pktlog_enable_cmdid;
871 u32 pdev_pktlog_disable_cmdid;
872 u32 pdev_set_wmm_params_cmdid;
873 u32 pdev_set_ht_cap_ie_cmdid;
874 u32 pdev_set_vht_cap_ie_cmdid;
875 u32 pdev_set_dscp_tid_map_cmdid;
876 u32 pdev_set_quiet_mode_cmdid;
877 u32 pdev_green_ap_ps_enable_cmdid;
878 u32 pdev_get_tpc_config_cmdid;
879 u32 pdev_set_base_macaddr_cmdid;
880 u32 vdev_create_cmdid;
881 u32 vdev_delete_cmdid;
882 u32 vdev_start_request_cmdid;
883 u32 vdev_restart_request_cmdid;
884 u32 vdev_up_cmdid;
885 u32 vdev_stop_cmdid;
886 u32 vdev_down_cmdid;
887 u32 vdev_set_param_cmdid;
888 u32 vdev_install_key_cmdid;
889 u32 peer_create_cmdid;
890 u32 peer_delete_cmdid;
891 u32 peer_flush_tids_cmdid;
892 u32 peer_set_param_cmdid;
893 u32 peer_assoc_cmdid;
894 u32 peer_add_wds_entry_cmdid;
895 u32 peer_remove_wds_entry_cmdid;
896 u32 peer_mcast_group_cmdid;
897 u32 bcn_tx_cmdid;
898 u32 pdev_send_bcn_cmdid;
899 u32 bcn_tmpl_cmdid;
900 u32 bcn_filter_rx_cmdid;
901 u32 prb_req_filter_rx_cmdid;
902 u32 mgmt_tx_cmdid;
903 u32 mgmt_tx_send_cmdid;
904 u32 prb_tmpl_cmdid;
905 u32 addba_clear_resp_cmdid;
906 u32 addba_send_cmdid;
907 u32 addba_status_cmdid;
908 u32 delba_send_cmdid;
909 u32 addba_set_resp_cmdid;
910 u32 send_singleamsdu_cmdid;
911 u32 sta_powersave_mode_cmdid;
912 u32 sta_powersave_param_cmdid;
913 u32 sta_mimo_ps_mode_cmdid;
914 u32 pdev_dfs_enable_cmdid;
915 u32 pdev_dfs_disable_cmdid;
916 u32 roam_scan_mode;
917 u32 roam_scan_rssi_threshold;
918 u32 roam_scan_period;
919 u32 roam_scan_rssi_change_threshold;
920 u32 roam_ap_profile;
921 u32 ofl_scan_add_ap_profile;
922 u32 ofl_scan_remove_ap_profile;
923 u32 ofl_scan_period;
924 u32 p2p_dev_set_device_info;
925 u32 p2p_dev_set_discoverability;
926 u32 p2p_go_set_beacon_ie;
927 u32 p2p_go_set_probe_resp_ie;
928 u32 p2p_set_vendor_ie_data_cmdid;
929 u32 ap_ps_peer_param_cmdid;
930 u32 ap_ps_peer_uapsd_coex_cmdid;
931 u32 peer_rate_retry_sched_cmdid;
932 u32 wlan_profile_trigger_cmdid;
933 u32 wlan_profile_set_hist_intvl_cmdid;
934 u32 wlan_profile_get_profile_data_cmdid;
935 u32 wlan_profile_enable_profile_id_cmdid;
936 u32 wlan_profile_list_profile_id_cmdid;
937 u32 pdev_suspend_cmdid;
938 u32 pdev_resume_cmdid;
939 u32 add_bcn_filter_cmdid;
940 u32 rmv_bcn_filter_cmdid;
941 u32 wow_add_wake_pattern_cmdid;
942 u32 wow_del_wake_pattern_cmdid;
943 u32 wow_enable_disable_wake_event_cmdid;
944 u32 wow_enable_cmdid;
945 u32 wow_hostwakeup_from_sleep_cmdid;
946 u32 rtt_measreq_cmdid;
947 u32 rtt_tsf_cmdid;
948 u32 vdev_spectral_scan_configure_cmdid;
949 u32 vdev_spectral_scan_enable_cmdid;
950 u32 request_stats_cmdid;
951 u32 request_peer_stats_info_cmdid;
952 u32 set_arp_ns_offload_cmdid;
953 u32 network_list_offload_config_cmdid;
954 u32 gtk_offload_cmdid;
955 u32 csa_offload_enable_cmdid;
956 u32 csa_offload_chanswitch_cmdid;
957 u32 chatter_set_mode_cmdid;
958 u32 peer_tid_addba_cmdid;
959 u32 peer_tid_delba_cmdid;
960 u32 sta_dtim_ps_method_cmdid;
961 u32 sta_uapsd_auto_trig_cmdid;
962 u32 sta_keepalive_cmd;
963 u32 echo_cmdid;
964 u32 pdev_utf_cmdid;
965 u32 dbglog_cfg_cmdid;
966 u32 pdev_qvit_cmdid;
967 u32 pdev_ftm_intg_cmdid;
968 u32 vdev_set_keepalive_cmdid;
969 u32 vdev_get_keepalive_cmdid;
970 u32 force_fw_hang_cmdid;
971 u32 gpio_config_cmdid;
972 u32 gpio_output_cmdid;
973 u32 pdev_get_temperature_cmdid;
974 u32 vdev_set_wmm_params_cmdid;
975 u32 tdls_set_state_cmdid;
976 u32 tdls_peer_update_cmdid;
977 u32 adaptive_qcs_cmdid;
978 u32 scan_update_request_cmdid;
979 u32 vdev_standby_response_cmdid;
980 u32 vdev_resume_response_cmdid;
981 u32 wlan_peer_caching_add_peer_cmdid;
982 u32 wlan_peer_caching_evict_peer_cmdid;
983 u32 wlan_peer_caching_restore_peer_cmdid;
984 u32 wlan_peer_caching_print_all_peers_info_cmdid;
985 u32 peer_update_wds_entry_cmdid;
986 u32 peer_add_proxy_sta_entry_cmdid;
987 u32 rtt_keepalive_cmdid;
988 u32 oem_req_cmdid;
989 u32 nan_cmdid;
990 u32 vdev_ratemask_cmdid;
991 u32 qboost_cfg_cmdid;
992 u32 pdev_smart_ant_enable_cmdid;
993 u32 pdev_smart_ant_set_rx_antenna_cmdid;
994 u32 peer_smart_ant_set_tx_antenna_cmdid;
995 u32 peer_smart_ant_set_train_info_cmdid;
996 u32 peer_smart_ant_set_node_config_ops_cmdid;
997 u32 pdev_set_antenna_switch_table_cmdid;
998 u32 pdev_set_ctl_table_cmdid;
999 u32 pdev_set_mimogain_table_cmdid;
1000 u32 pdev_ratepwr_table_cmdid;
1001 u32 pdev_ratepwr_chainmsk_table_cmdid;
1002 u32 pdev_fips_cmdid;
1003 u32 tt_set_conf_cmdid;
1004 u32 fwtest_cmdid;
1005 u32 vdev_atf_request_cmdid;
1006 u32 peer_atf_request_cmdid;
1007 u32 pdev_get_ani_cck_config_cmdid;
1008 u32 pdev_get_ani_ofdm_config_cmdid;
1009 u32 pdev_reserve_ast_entry_cmdid;
1010 u32 pdev_get_nfcal_power_cmdid;
1011 u32 pdev_get_tpc_cmdid;
1012 u32 pdev_get_ast_info_cmdid;
1013 u32 vdev_set_dscp_tid_map_cmdid;
1014 u32 pdev_get_info_cmdid;
1015 u32 vdev_get_info_cmdid;
1016 u32 vdev_filter_neighbor_rx_packets_cmdid;
1017 u32 mu_cal_start_cmdid;
1018 u32 set_cca_params_cmdid;
1019 u32 pdev_bss_chan_info_request_cmdid;
1020 u32 pdev_enable_adaptive_cca_cmdid;
1021 u32 ext_resource_cfg_cmdid;
1022 u32 vdev_set_ie_cmdid;
1023 u32 set_lteu_config_cmdid;
1024 u32 atf_ssid_grouping_request_cmdid;
1025 u32 peer_atf_ext_request_cmdid;
1026 u32 set_periodic_channel_stats_cfg_cmdid;
1027 u32 peer_bwf_request_cmdid;
1028 u32 btcoex_cfg_cmdid;
1029 u32 peer_tx_mu_txmit_count_cmdid;
1030 u32 peer_tx_mu_txmit_rstcnt_cmdid;
1031 u32 peer_gid_userpos_list_cmdid;
1032 u32 pdev_check_cal_version_cmdid;
1033 u32 coex_version_cfg_cmid;
1034 u32 pdev_get_rx_filter_cmdid;
1035 u32 pdev_extended_nss_cfg_cmdid;
1036 u32 vdev_set_scan_nac_rssi_cmdid;
1037 u32 prog_gpio_band_select_cmdid;
1038 u32 config_smart_logging_cmdid;
1039 u32 debug_fatal_condition_cmdid;
1040 u32 get_tsf_timer_cmdid;
1041 u32 pdev_get_tpc_table_cmdid;
1042 u32 vdev_sifs_trigger_time_cmdid;
1043 u32 pdev_wds_entry_list_cmdid;
1044 u32 tdls_set_offchan_mode_cmdid;
1045 u32 radar_found_cmdid;
1046 u32 set_bb_timing_cmdid;
1047 u32 per_peer_per_tid_config_cmdid;
1048};
1049
1050/*
1051 * wmi command groups.
1052 */
1053enum wmi_cmd_group {
1054 /* 0 to 2 are reserved */
1055 WMI_GRP_START = 0x3,
1056 WMI_GRP_SCAN = WMI_GRP_START,
1057 WMI_GRP_PDEV,
1058 WMI_GRP_VDEV,
1059 WMI_GRP_PEER,
1060 WMI_GRP_MGMT,
1061 WMI_GRP_BA_NEG,
1062 WMI_GRP_STA_PS,
1063 WMI_GRP_DFS,
1064 WMI_GRP_ROAM,
1065 WMI_GRP_OFL_SCAN,
1066 WMI_GRP_P2P,
1067 WMI_GRP_AP_PS,
1068 WMI_GRP_RATE_CTRL,
1069 WMI_GRP_PROFILE,
1070 WMI_GRP_SUSPEND,
1071 WMI_GRP_BCN_FILTER,
1072 WMI_GRP_WOW,
1073 WMI_GRP_RTT,
1074 WMI_GRP_SPECTRAL,
1075 WMI_GRP_STATS,
1076 WMI_GRP_ARP_NS_OFL,
1077 WMI_GRP_NLO_OFL,
1078 WMI_GRP_GTK_OFL,
1079 WMI_GRP_CSA_OFL,
1080 WMI_GRP_CHATTER,
1081 WMI_GRP_TID_ADDBA,
1082 WMI_GRP_MISC,
1083 WMI_GRP_GPIO,
1084};
1085
1086#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1087#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1088
1089#define WMI_CMD_UNSUPPORTED 0
1090
1091/* Command IDs and command events for MAIN FW. */
1092enum wmi_cmd_id {
1093 WMI_INIT_CMDID = 0x1,
1094
1095 /* Scan specific commands */
1096 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1097 WMI_STOP_SCAN_CMDID,
1098 WMI_SCAN_CHAN_LIST_CMDID,
1099 WMI_SCAN_SCH_PRIO_TBL_CMDID,
1100
1101 /* PDEV (physical device) specific commands */
1102 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1103 WMI_PDEV_SET_CHANNEL_CMDID,
1104 WMI_PDEV_SET_PARAM_CMDID,
1105 WMI_PDEV_PKTLOG_ENABLE_CMDID,
1106 WMI_PDEV_PKTLOG_DISABLE_CMDID,
1107 WMI_PDEV_SET_WMM_PARAMS_CMDID,
1108 WMI_PDEV_SET_HT_CAP_IE_CMDID,
1109 WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1110 WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1111 WMI_PDEV_SET_QUIET_MODE_CMDID,
1112 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1113 WMI_PDEV_GET_TPC_CONFIG_CMDID,
1114 WMI_PDEV_SET_BASE_MACADDR_CMDID,
1115
1116 /* VDEV (virtual device) specific commands */
1117 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1118 WMI_VDEV_DELETE_CMDID,
1119 WMI_VDEV_START_REQUEST_CMDID,
1120 WMI_VDEV_RESTART_REQUEST_CMDID,
1121 WMI_VDEV_UP_CMDID,
1122 WMI_VDEV_STOP_CMDID,
1123 WMI_VDEV_DOWN_CMDID,
1124 WMI_VDEV_SET_PARAM_CMDID,
1125 WMI_VDEV_INSTALL_KEY_CMDID,
1126
1127 /* peer specific commands */
1128 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1129 WMI_PEER_DELETE_CMDID,
1130 WMI_PEER_FLUSH_TIDS_CMDID,
1131 WMI_PEER_SET_PARAM_CMDID,
1132 WMI_PEER_ASSOC_CMDID,
1133 WMI_PEER_ADD_WDS_ENTRY_CMDID,
1134 WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1135 WMI_PEER_MCAST_GROUP_CMDID,
1136
1137 /* beacon/management specific commands */
1138 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1139 WMI_PDEV_SEND_BCN_CMDID,
1140 WMI_BCN_TMPL_CMDID,
1141 WMI_BCN_FILTER_RX_CMDID,
1142 WMI_PRB_REQ_FILTER_RX_CMDID,
1143 WMI_MGMT_TX_CMDID,
1144 WMI_PRB_TMPL_CMDID,
1145
1146 /* commands to directly control BA negotiation directly from host. */
1147 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1148 WMI_ADDBA_SEND_CMDID,
1149 WMI_ADDBA_STATUS_CMDID,
1150 WMI_DELBA_SEND_CMDID,
1151 WMI_ADDBA_SET_RESP_CMDID,
1152 WMI_SEND_SINGLEAMSDU_CMDID,
1153
1154 /* Station power save specific config */
1155 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1156 WMI_STA_POWERSAVE_PARAM_CMDID,
1157 WMI_STA_MIMO_PS_MODE_CMDID,
1158
1159 /** DFS-specific commands */
1160 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1161 WMI_PDEV_DFS_DISABLE_CMDID,
1162
1163 /* Roaming specific commands */
1164 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1165 WMI_ROAM_SCAN_RSSI_THRESHOLD,
1166 WMI_ROAM_SCAN_PERIOD,
1167 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1168 WMI_ROAM_AP_PROFILE,
1169
1170 /* offload scan specific commands */
1171 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1172 WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1173 WMI_OFL_SCAN_PERIOD,
1174
1175 /* P2P specific commands */
1176 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1177 WMI_P2P_DEV_SET_DISCOVERABILITY,
1178 WMI_P2P_GO_SET_BEACON_IE,
1179 WMI_P2P_GO_SET_PROBE_RESP_IE,
1180 WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1181
1182 /* AP power save specific config */
1183 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1184 WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1185
1186 /* Rate-control specific commands */
1187 WMI_PEER_RATE_RETRY_SCHED_CMDID =
1188 WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1189
1190 /* WLAN Profiling commands. */
1191 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1192 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1193 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1194 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1195 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1196
1197 /* Suspend resume command Ids */
1198 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1199 WMI_PDEV_RESUME_CMDID,
1200
1201 /* Beacon filter commands */
1202 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1203 WMI_RMV_BCN_FILTER_CMDID,
1204
1205 /* WOW Specific WMI commands*/
1206 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1207 WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1208 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1209 WMI_WOW_ENABLE_CMDID,
1210 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1211
1212 /* RTT measurement related cmd */
1213 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1214 WMI_RTT_TSF_CMDID,
1215
1216 /* spectral scan commands */
1217 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1218 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1219
1220 /* F/W stats */
1221 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1222
1223 /* ARP OFFLOAD REQUEST*/
1224 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1225
1226 /* NS offload confid*/
1227 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1228
1229 /* GTK offload Specific WMI commands*/
1230 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1231
1232 /* CSA offload Specific WMI commands*/
1233 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1234 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1235
1236 /* Chatter commands*/
1237 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1238
1239 /* addba specific commands */
1240 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1241 WMI_PEER_TID_DELBA_CMDID,
1242
1243 /* set station mimo powersave method */
1244 WMI_STA_DTIM_PS_METHOD_CMDID,
1245 /* Configure the Station UAPSD AC Auto Trigger Parameters */
1246 WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1247
1248 /* STA Keep alive parameter configuration,
1249 * Requires WMI_SERVICE_STA_KEEP_ALIVE
1250 */
1251 WMI_STA_KEEPALIVE_CMD,
1252
1253 /* misc command group */
1254 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1255 WMI_PDEV_UTF_CMDID,
1256 WMI_DBGLOG_CFG_CMDID,
1257 WMI_PDEV_QVIT_CMDID,
1258 WMI_PDEV_FTM_INTG_CMDID,
1259 WMI_VDEV_SET_KEEPALIVE_CMDID,
1260 WMI_VDEV_GET_KEEPALIVE_CMDID,
1261 WMI_FORCE_FW_HANG_CMDID,
1262
1263 /* GPIO Configuration */
1264 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1265 WMI_GPIO_OUTPUT_CMDID,
1266};
1267
1268enum wmi_event_id {
1269 WMI_SERVICE_READY_EVENTID = 0x1,
1270 WMI_READY_EVENTID,
1271 WMI_SERVICE_AVAILABLE_EVENTID,
1272
1273 /* Scan specific events */
1274 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1275
1276 /* PDEV specific events */
1277 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1278 WMI_CHAN_INFO_EVENTID,
1279 WMI_PHYERR_EVENTID,
1280
1281 /* VDEV specific events */
1282 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1283 WMI_VDEV_STOPPED_EVENTID,
1284 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1285
1286 /* peer specific events */
1287 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1288
1289 /* beacon/mgmt specific events */
1290 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1291 WMI_HOST_SWBA_EVENTID,
1292 WMI_TBTTOFFSET_UPDATE_EVENTID,
1293
1294 /* ADDBA Related WMI Events*/
1295 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1296 WMI_TX_ADDBA_COMPLETE_EVENTID,
1297
1298 /* Roam event to trigger roaming on host */
1299 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1300 WMI_PROFILE_MATCH,
1301
1302 /* WoW */
1303 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1304
1305 /* RTT */
1306 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1307 WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1308 WMI_RTT_ERROR_REPORT_EVENTID,
1309
1310 /* GTK offload */
1311 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1312 WMI_GTK_REKEY_FAIL_EVENTID,
1313
1314 /* CSA IE received event */
1315 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1316
1317 /* Misc events */
1318 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1319 WMI_PDEV_UTF_EVENTID,
1320 WMI_DEBUG_MESG_EVENTID,
1321 WMI_UPDATE_STATS_EVENTID,
1322 WMI_DEBUG_PRINT_EVENTID,
1323 WMI_DCS_INTERFERENCE_EVENTID,
1324 WMI_PDEV_QVIT_EVENTID,
1325 WMI_WLAN_PROFILE_DATA_EVENTID,
1326 WMI_PDEV_FTM_INTG_EVENTID,
1327 WMI_WLAN_FREQ_AVOID_EVENTID,
1328 WMI_VDEV_GET_KEEPALIVE_EVENTID,
1329
1330 /* GPIO Event */
1331 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1332};
1333
1334/* Command IDs and command events for 10.X firmware */
1335enum wmi_10x_cmd_id {
1336 WMI_10X_START_CMDID = 0x9000,
1337 WMI_10X_END_CMDID = 0x9FFF,
1338
1339 /* initialize the wlan sub system */
1340 WMI_10X_INIT_CMDID,
1341
1342 /* Scan specific commands */
1343
1344 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1345 WMI_10X_STOP_SCAN_CMDID,
1346 WMI_10X_SCAN_CHAN_LIST_CMDID,
1347 WMI_10X_ECHO_CMDID,
1348
1349 /* PDEV(physical device) specific commands */
1350 WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1351 WMI_10X_PDEV_SET_CHANNEL_CMDID,
1352 WMI_10X_PDEV_SET_PARAM_CMDID,
1353 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1354 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1355 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1356 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1357 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1358 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1359 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1360 WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1361 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1362 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1363
1364 /* VDEV(virtual device) specific commands */
1365 WMI_10X_VDEV_CREATE_CMDID,
1366 WMI_10X_VDEV_DELETE_CMDID,
1367 WMI_10X_VDEV_START_REQUEST_CMDID,
1368 WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1369 WMI_10X_VDEV_UP_CMDID,
1370 WMI_10X_VDEV_STOP_CMDID,
1371 WMI_10X_VDEV_DOWN_CMDID,
1372 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1373 WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1374 WMI_10X_VDEV_SET_PARAM_CMDID,
1375 WMI_10X_VDEV_INSTALL_KEY_CMDID,
1376
1377 /* peer specific commands */
1378 WMI_10X_PEER_CREATE_CMDID,
1379 WMI_10X_PEER_DELETE_CMDID,
1380 WMI_10X_PEER_FLUSH_TIDS_CMDID,
1381 WMI_10X_PEER_SET_PARAM_CMDID,
1382 WMI_10X_PEER_ASSOC_CMDID,
1383 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1384 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1385 WMI_10X_PEER_MCAST_GROUP_CMDID,
1386
1387 /* beacon/management specific commands */
1388
1389 WMI_10X_BCN_TX_CMDID,
1390 WMI_10X_BCN_PRB_TMPL_CMDID,
1391 WMI_10X_BCN_FILTER_RX_CMDID,
1392 WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1393 WMI_10X_MGMT_TX_CMDID,
1394
1395 /* commands to directly control ba negotiation directly from host. */
1396 WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1397 WMI_10X_ADDBA_SEND_CMDID,
1398 WMI_10X_ADDBA_STATUS_CMDID,
1399 WMI_10X_DELBA_SEND_CMDID,
1400 WMI_10X_ADDBA_SET_RESP_CMDID,
1401 WMI_10X_SEND_SINGLEAMSDU_CMDID,
1402
1403 /* Station power save specific config */
1404 WMI_10X_STA_POWERSAVE_MODE_CMDID,
1405 WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1406 WMI_10X_STA_MIMO_PS_MODE_CMDID,
1407
1408 /* set debug log config */
1409 WMI_10X_DBGLOG_CFG_CMDID,
1410
1411 /* DFS-specific commands */
1412 WMI_10X_PDEV_DFS_ENABLE_CMDID,
1413 WMI_10X_PDEV_DFS_DISABLE_CMDID,
1414
1415 /* QVIT specific command id */
1416 WMI_10X_PDEV_QVIT_CMDID,
1417
1418 /* Offload Scan and Roaming related commands */
1419 WMI_10X_ROAM_SCAN_MODE,
1420 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1421 WMI_10X_ROAM_SCAN_PERIOD,
1422 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1423 WMI_10X_ROAM_AP_PROFILE,
1424 WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1425 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1426 WMI_10X_OFL_SCAN_PERIOD,
1427
1428 /* P2P specific commands */
1429 WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1430 WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1431 WMI_10X_P2P_GO_SET_BEACON_IE,
1432 WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1433
1434 /* AP power save specific config */
1435 WMI_10X_AP_PS_PEER_PARAM_CMDID,
1436 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1437
1438 /* Rate-control specific commands */
1439 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1440
1441 /* WLAN Profiling commands. */
1442 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1443 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1444 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1445 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1446 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1447
1448 /* Suspend resume command Ids */
1449 WMI_10X_PDEV_SUSPEND_CMDID,
1450 WMI_10X_PDEV_RESUME_CMDID,
1451
1452 /* Beacon filter commands */
1453 WMI_10X_ADD_BCN_FILTER_CMDID,
1454 WMI_10X_RMV_BCN_FILTER_CMDID,
1455
1456 /* WOW Specific WMI commands*/
1457 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1458 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1459 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1460 WMI_10X_WOW_ENABLE_CMDID,
1461 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1462
1463 /* RTT measurement related cmd */
1464 WMI_10X_RTT_MEASREQ_CMDID,
1465 WMI_10X_RTT_TSF_CMDID,
1466
1467 /* transmit beacon by value */
1468 WMI_10X_PDEV_SEND_BCN_CMDID,
1469
1470 /* F/W stats */
1471 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1472 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1473 WMI_10X_REQUEST_STATS_CMDID,
1474
1475 /* GPIO Configuration */
1476 WMI_10X_GPIO_CONFIG_CMDID,
1477 WMI_10X_GPIO_OUTPUT_CMDID,
1478
1479 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1480};
1481
1482enum wmi_10x_event_id {
1483 WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1484 WMI_10X_READY_EVENTID,
1485 WMI_10X_START_EVENTID = 0x9000,
1486 WMI_10X_END_EVENTID = 0x9FFF,
1487
1488 /* Scan specific events */
1489 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1490 WMI_10X_ECHO_EVENTID,
1491 WMI_10X_DEBUG_MESG_EVENTID,
1492 WMI_10X_UPDATE_STATS_EVENTID,
1493
1494 /* Instantaneous RSSI event */
1495 WMI_10X_INST_RSSI_STATS_EVENTID,
1496
1497 /* VDEV specific events */
1498 WMI_10X_VDEV_START_RESP_EVENTID,
1499 WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1500 WMI_10X_VDEV_RESUME_REQ_EVENTID,
1501 WMI_10X_VDEV_STOPPED_EVENTID,
1502
1503 /* peer specific events */
1504 WMI_10X_PEER_STA_KICKOUT_EVENTID,
1505
1506 /* beacon/mgmt specific events */
1507 WMI_10X_HOST_SWBA_EVENTID,
1508 WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1509 WMI_10X_MGMT_RX_EVENTID,
1510
1511 /* Channel stats event */
1512 WMI_10X_CHAN_INFO_EVENTID,
1513
1514 /* PHY Error specific WMI event */
1515 WMI_10X_PHYERR_EVENTID,
1516
1517 /* Roam event to trigger roaming on host */
1518 WMI_10X_ROAM_EVENTID,
1519
1520 /* matching AP found from list of profiles */
1521 WMI_10X_PROFILE_MATCH,
1522
1523 /* debug print message used for tracing FW code while debugging */
1524 WMI_10X_DEBUG_PRINT_EVENTID,
1525 /* VI spoecific event */
1526 WMI_10X_PDEV_QVIT_EVENTID,
1527 /* FW code profile data in response to profile request */
1528 WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1529
1530 /*RTT related event ID*/
1531 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1532 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1533 WMI_10X_RTT_ERROR_REPORT_EVENTID,
1534
1535 WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1536 WMI_10X_DCS_INTERFERENCE_EVENTID,
1537
1538 /* TPC config for the current operating channel */
1539 WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1540
1541 WMI_10X_GPIO_INPUT_EVENTID,
1542 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1543};
1544
1545enum wmi_10_2_cmd_id {
1546 WMI_10_2_START_CMDID = 0x9000,
1547 WMI_10_2_END_CMDID = 0x9FFF,
1548 WMI_10_2_INIT_CMDID,
1549 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1550 WMI_10_2_STOP_SCAN_CMDID,
1551 WMI_10_2_SCAN_CHAN_LIST_CMDID,
1552 WMI_10_2_ECHO_CMDID,
1553 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1554 WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1555 WMI_10_2_PDEV_SET_PARAM_CMDID,
1556 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1557 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1558 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1559 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1560 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1561 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1562 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1563 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1564 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1565 WMI_10_2_VDEV_CREATE_CMDID,
1566 WMI_10_2_VDEV_DELETE_CMDID,
1567 WMI_10_2_VDEV_START_REQUEST_CMDID,
1568 WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1569 WMI_10_2_VDEV_UP_CMDID,
1570 WMI_10_2_VDEV_STOP_CMDID,
1571 WMI_10_2_VDEV_DOWN_CMDID,
1572 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1573 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1574 WMI_10_2_VDEV_SET_PARAM_CMDID,
1575 WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1576 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1577 WMI_10_2_PEER_CREATE_CMDID,
1578 WMI_10_2_PEER_DELETE_CMDID,
1579 WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1580 WMI_10_2_PEER_SET_PARAM_CMDID,
1581 WMI_10_2_PEER_ASSOC_CMDID,
1582 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1583 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1584 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1585 WMI_10_2_PEER_MCAST_GROUP_CMDID,
1586 WMI_10_2_BCN_TX_CMDID,
1587 WMI_10_2_BCN_PRB_TMPL_CMDID,
1588 WMI_10_2_BCN_FILTER_RX_CMDID,
1589 WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1590 WMI_10_2_MGMT_TX_CMDID,
1591 WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1592 WMI_10_2_ADDBA_SEND_CMDID,
1593 WMI_10_2_ADDBA_STATUS_CMDID,
1594 WMI_10_2_DELBA_SEND_CMDID,
1595 WMI_10_2_ADDBA_SET_RESP_CMDID,
1596 WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1597 WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1598 WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1599 WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1600 WMI_10_2_DBGLOG_CFG_CMDID,
1601 WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1602 WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1603 WMI_10_2_PDEV_QVIT_CMDID,
1604 WMI_10_2_ROAM_SCAN_MODE,
1605 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1606 WMI_10_2_ROAM_SCAN_PERIOD,
1607 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1608 WMI_10_2_ROAM_AP_PROFILE,
1609 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1610 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1611 WMI_10_2_OFL_SCAN_PERIOD,
1612 WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1613 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1614 WMI_10_2_P2P_GO_SET_BEACON_IE,
1615 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1616 WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1617 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1618 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1619 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1620 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1621 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1622 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1623 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1624 WMI_10_2_PDEV_SUSPEND_CMDID,
1625 WMI_10_2_PDEV_RESUME_CMDID,
1626 WMI_10_2_ADD_BCN_FILTER_CMDID,
1627 WMI_10_2_RMV_BCN_FILTER_CMDID,
1628 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1629 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1630 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1631 WMI_10_2_WOW_ENABLE_CMDID,
1632 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1633 WMI_10_2_RTT_MEASREQ_CMDID,
1634 WMI_10_2_RTT_TSF_CMDID,
1635 WMI_10_2_RTT_KEEPALIVE_CMDID,
1636 WMI_10_2_PDEV_SEND_BCN_CMDID,
1637 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1638 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1639 WMI_10_2_REQUEST_STATS_CMDID,
1640 WMI_10_2_GPIO_CONFIG_CMDID,
1641 WMI_10_2_GPIO_OUTPUT_CMDID,
1642 WMI_10_2_VDEV_RATEMASK_CMDID,
1643 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1644 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1645 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1646 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1647 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1648 WMI_10_2_FORCE_FW_HANG_CMDID,
1649 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1650 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1651 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1652 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1653 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1654 WMI_10_2_PDEV_GET_INFO,
1655 WMI_10_2_VDEV_GET_INFO,
1656 WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1657 WMI_10_2_PEER_ATF_REQUEST_CMDID,
1658 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1659 WMI_10_2_MU_CAL_START_CMDID,
1660 WMI_10_2_SET_LTEU_CONFIG_CMDID,
1661 WMI_10_2_SET_CCA_PARAMS,
1662 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1663 WMI_10_2_FWTEST_CMDID,
1664 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1665 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1666};
1667
1668enum wmi_10_2_event_id {
1669 WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1670 WMI_10_2_READY_EVENTID,
1671 WMI_10_2_DEBUG_MESG_EVENTID,
1672 WMI_10_2_START_EVENTID = 0x9000,
1673 WMI_10_2_END_EVENTID = 0x9FFF,
1674 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1675 WMI_10_2_ECHO_EVENTID,
1676 WMI_10_2_UPDATE_STATS_EVENTID,
1677 WMI_10_2_INST_RSSI_STATS_EVENTID,
1678 WMI_10_2_VDEV_START_RESP_EVENTID,
1679 WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1680 WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1681 WMI_10_2_VDEV_STOPPED_EVENTID,
1682 WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1683 WMI_10_2_HOST_SWBA_EVENTID,
1684 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1685 WMI_10_2_MGMT_RX_EVENTID,
1686 WMI_10_2_CHAN_INFO_EVENTID,
1687 WMI_10_2_PHYERR_EVENTID,
1688 WMI_10_2_ROAM_EVENTID,
1689 WMI_10_2_PROFILE_MATCH,
1690 WMI_10_2_DEBUG_PRINT_EVENTID,
1691 WMI_10_2_PDEV_QVIT_EVENTID,
1692 WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1693 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1694 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1695 WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1696 WMI_10_2_RTT_KEEPALIVE_EVENTID,
1697 WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1698 WMI_10_2_DCS_INTERFERENCE_EVENTID,
1699 WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1700 WMI_10_2_GPIO_INPUT_EVENTID,
1701 WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1702 WMI_10_2_GENERIC_BUFFER_EVENTID,
1703 WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1704 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1705 WMI_10_2_WDS_PEER_EVENTID,
1706 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1707 WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1708 WMI_10_2_MU_REPORT_EVENTID,
1709 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1710 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1711};
1712
1713enum wmi_10_4_cmd_id {
1714 WMI_10_4_START_CMDID = 0x9000,
1715 WMI_10_4_END_CMDID = 0x9FFF,
1716 WMI_10_4_INIT_CMDID,
1717 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1718 WMI_10_4_STOP_SCAN_CMDID,
1719 WMI_10_4_SCAN_CHAN_LIST_CMDID,
1720 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1721 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1722 WMI_10_4_ECHO_CMDID,
1723 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1724 WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1725 WMI_10_4_PDEV_SET_PARAM_CMDID,
1726 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1727 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1728 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1729 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1730 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1731 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1732 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1733 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1734 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1735 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1736 WMI_10_4_VDEV_CREATE_CMDID,
1737 WMI_10_4_VDEV_DELETE_CMDID,
1738 WMI_10_4_VDEV_START_REQUEST_CMDID,
1739 WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1740 WMI_10_4_VDEV_UP_CMDID,
1741 WMI_10_4_VDEV_STOP_CMDID,
1742 WMI_10_4_VDEV_DOWN_CMDID,
1743 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1744 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1745 WMI_10_4_VDEV_SET_PARAM_CMDID,
1746 WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1747 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1748 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1749 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1750 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1751 WMI_10_4_PEER_CREATE_CMDID,
1752 WMI_10_4_PEER_DELETE_CMDID,
1753 WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1754 WMI_10_4_PEER_SET_PARAM_CMDID,
1755 WMI_10_4_PEER_ASSOC_CMDID,
1756 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1757 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1758 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1759 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1760 WMI_10_4_PEER_MCAST_GROUP_CMDID,
1761 WMI_10_4_BCN_TX_CMDID,
1762 WMI_10_4_PDEV_SEND_BCN_CMDID,
1763 WMI_10_4_BCN_PRB_TMPL_CMDID,
1764 WMI_10_4_BCN_FILTER_RX_CMDID,
1765 WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1766 WMI_10_4_MGMT_TX_CMDID,
1767 WMI_10_4_PRB_TMPL_CMDID,
1768 WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1769 WMI_10_4_ADDBA_SEND_CMDID,
1770 WMI_10_4_ADDBA_STATUS_CMDID,
1771 WMI_10_4_DELBA_SEND_CMDID,
1772 WMI_10_4_ADDBA_SET_RESP_CMDID,
1773 WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1774 WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1775 WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1776 WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1777 WMI_10_4_DBGLOG_CFG_CMDID,
1778 WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1779 WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1780 WMI_10_4_PDEV_QVIT_CMDID,
1781 WMI_10_4_ROAM_SCAN_MODE,
1782 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1783 WMI_10_4_ROAM_SCAN_PERIOD,
1784 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1785 WMI_10_4_ROAM_AP_PROFILE,
1786 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1787 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1788 WMI_10_4_OFL_SCAN_PERIOD,
1789 WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1790 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1791 WMI_10_4_P2P_GO_SET_BEACON_IE,
1792 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1793 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1794 WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1795 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1796 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1797 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1798 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1799 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1800 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1801 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1802 WMI_10_4_PDEV_SUSPEND_CMDID,
1803 WMI_10_4_PDEV_RESUME_CMDID,
1804 WMI_10_4_ADD_BCN_FILTER_CMDID,
1805 WMI_10_4_RMV_BCN_FILTER_CMDID,
1806 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1807 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1808 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1809 WMI_10_4_WOW_ENABLE_CMDID,
1810 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1811 WMI_10_4_RTT_MEASREQ_CMDID,
1812 WMI_10_4_RTT_TSF_CMDID,
1813 WMI_10_4_RTT_KEEPALIVE_CMDID,
1814 WMI_10_4_OEM_REQ_CMDID,
1815 WMI_10_4_NAN_CMDID,
1816 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1817 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1818 WMI_10_4_REQUEST_STATS_CMDID,
1819 WMI_10_4_GPIO_CONFIG_CMDID,
1820 WMI_10_4_GPIO_OUTPUT_CMDID,
1821 WMI_10_4_VDEV_RATEMASK_CMDID,
1822 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1823 WMI_10_4_GTK_OFFLOAD_CMDID,
1824 WMI_10_4_QBOOST_CFG_CMDID,
1825 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1826 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1827 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1828 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1829 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1830 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1831 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1832 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1833 WMI_10_4_FORCE_FW_HANG_CMDID,
1834 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1835 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1836 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1837 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1838 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1839 WMI_10_4_PDEV_FIPS_CMDID,
1840 WMI_10_4_TT_SET_CONF_CMDID,
1841 WMI_10_4_FWTEST_CMDID,
1842 WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1843 WMI_10_4_PEER_ATF_REQUEST_CMDID,
1844 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1845 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1846 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1847 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1848 WMI_10_4_PDEV_GET_TPC_CMDID,
1849 WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1850 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1851 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1852 WMI_10_4_PDEV_GET_INFO_CMDID,
1853 WMI_10_4_VDEV_GET_INFO_CMDID,
1854 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1855 WMI_10_4_MU_CAL_START_CMDID,
1856 WMI_10_4_SET_CCA_PARAMS_CMDID,
1857 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1858 WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1859 WMI_10_4_VDEV_SET_IE_CMDID,
1860 WMI_10_4_SET_LTEU_CONFIG_CMDID,
1861 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1862 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1863 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1864 WMI_10_4_PEER_BWF_REQUEST_CMDID,
1865 WMI_10_4_BTCOEX_CFG_CMDID,
1866 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1867 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1868 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1869 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1870 WMI_10_4_COEX_VERSION_CFG_CMID,
1871 WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1872 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1873 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1874 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1875 WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1876 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1877 WMI_10_4_GET_TSF_TIMER_CMDID,
1878 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1879 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1880 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1881 WMI_10_4_TDLS_SET_STATE_CMDID,
1882 WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1883 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1884 WMI_10_4_PDEV_SEND_FD_CMDID,
1885 WMI_10_4_ENABLE_FILS_CMDID,
1886 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1887 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1888 WMI_10_4_RADAR_FOUND_CMDID,
1889 WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1890 WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1891 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1892};
1893
1894enum wmi_10_4_event_id {
1895 WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1896 WMI_10_4_READY_EVENTID,
1897 WMI_10_4_DEBUG_MESG_EVENTID,
1898 WMI_10_4_START_EVENTID = 0x9000,
1899 WMI_10_4_END_EVENTID = 0x9FFF,
1900 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1901 WMI_10_4_ECHO_EVENTID,
1902 WMI_10_4_UPDATE_STATS_EVENTID,
1903 WMI_10_4_INST_RSSI_STATS_EVENTID,
1904 WMI_10_4_VDEV_START_RESP_EVENTID,
1905 WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1906 WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1907 WMI_10_4_VDEV_STOPPED_EVENTID,
1908 WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1909 WMI_10_4_HOST_SWBA_EVENTID,
1910 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1911 WMI_10_4_MGMT_RX_EVENTID,
1912 WMI_10_4_CHAN_INFO_EVENTID,
1913 WMI_10_4_PHYERR_EVENTID,
1914 WMI_10_4_ROAM_EVENTID,
1915 WMI_10_4_PROFILE_MATCH,
1916 WMI_10_4_DEBUG_PRINT_EVENTID,
1917 WMI_10_4_PDEV_QVIT_EVENTID,
1918 WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1919 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1920 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1921 WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1922 WMI_10_4_RTT_KEEPALIVE_EVENTID,
1923 WMI_10_4_OEM_CAPABILITY_EVENTID,
1924 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1925 WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1926 WMI_10_4_NAN_EVENTID,
1927 WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1928 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1929 WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1930 WMI_10_4_DCS_INTERFERENCE_EVENTID,
1931 WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1932 WMI_10_4_CSA_HANDLING_EVENTID,
1933 WMI_10_4_GPIO_INPUT_EVENTID,
1934 WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1935 WMI_10_4_GENERIC_BUFFER_EVENTID,
1936 WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1937 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1938 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1939 WMI_10_4_WDS_PEER_EVENTID,
1940 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1941 WMI_10_4_PDEV_FIPS_EVENTID,
1942 WMI_10_4_TT_STATS_EVENTID,
1943 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1944 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1945 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1946 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1947 WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1948 WMI_10_4_PDEV_TPC_EVENTID,
1949 WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1950 WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1951 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1952 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1953 WMI_10_4_MU_REPORT_EVENTID,
1954 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1955 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1956 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1957 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1958 WMI_10_4_ATF_PEER_STATS_EVENTID,
1959 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1960 WMI_10_4_NAC_RSSI_EVENTID,
1961 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1962 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1963 WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1964 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1965 WMI_10_4_TDLS_PEER_EVENTID,
1966 WMI_10_4_HOST_SWFDA_EVENTID,
1967 WMI_10_4_ESP_ESTIMATE_EVENTID,
1968 WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1969 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1970};
1971
1972enum wmi_phy_mode {
1973 MODE_11A = 0, /* 11a Mode */
1974 MODE_11G = 1, /* 11b/g Mode */
1975 MODE_11B = 2, /* 11b Mode */
1976 MODE_11GONLY = 3, /* 11g only Mode */
1977 MODE_11NA_HT20 = 4, /* 11a HT20 mode */
1978 MODE_11NG_HT20 = 5, /* 11g HT20 mode */
1979 MODE_11NA_HT40 = 6, /* 11a HT40 mode */
1980 MODE_11NG_HT40 = 7, /* 11g HT40 mode */
1981 MODE_11AC_VHT20 = 8,
1982 MODE_11AC_VHT40 = 9,
1983 MODE_11AC_VHT80 = 10,
1984 /* MODE_11AC_VHT160 = 11, */
1985 MODE_11AC_VHT20_2G = 11,
1986 MODE_11AC_VHT40_2G = 12,
1987 MODE_11AC_VHT80_2G = 13,
1988 MODE_11AC_VHT80_80 = 14,
1989 MODE_11AC_VHT160 = 15,
1990 MODE_UNKNOWN = 16,
1991 MODE_MAX = 16
1992};
1993
1994static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1995{
1996 switch (mode) {
1997 case MODE_11A:
1998 return "11a";
1999 case MODE_11G:
2000 return "11g";
2001 case MODE_11B:
2002 return "11b";
2003 case MODE_11GONLY:
2004 return "11gonly";
2005 case MODE_11NA_HT20:
2006 return "11na-ht20";
2007 case MODE_11NG_HT20:
2008 return "11ng-ht20";
2009 case MODE_11NA_HT40:
2010 return "11na-ht40";
2011 case MODE_11NG_HT40:
2012 return "11ng-ht40";
2013 case MODE_11AC_VHT20:
2014 return "11ac-vht20";
2015 case MODE_11AC_VHT40:
2016 return "11ac-vht40";
2017 case MODE_11AC_VHT80:
2018 return "11ac-vht80";
2019 case MODE_11AC_VHT160:
2020 return "11ac-vht160";
2021 case MODE_11AC_VHT80_80:
2022 return "11ac-vht80+80";
2023 case MODE_11AC_VHT20_2G:
2024 return "11ac-vht20-2g";
2025 case MODE_11AC_VHT40_2G:
2026 return "11ac-vht40-2g";
2027 case MODE_11AC_VHT80_2G:
2028 return "11ac-vht80-2g";
2029 case MODE_UNKNOWN:
2030 /* skip */
2031 break;
2032
2033 /* no default handler to allow compiler to check that the
2034 * enum is fully handled
2035 */
2036 }
2037
2038 return "<unknown>";
2039}
2040
2041#define WMI_CHAN_LIST_TAG 0x1
2042#define WMI_SSID_LIST_TAG 0x2
2043#define WMI_BSSID_LIST_TAG 0x3
2044#define WMI_IE_TAG 0x4
2045
2046struct wmi_channel {
2047 __le32 mhz;
2048 __le32 band_center_freq1;
2049 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2050 union {
2051 __le32 flags; /* WMI_CHAN_FLAG_ */
2052 struct {
2053 u8 mode; /* only 6 LSBs */
2054 } __packed;
2055 } __packed;
2056 union {
2057 __le32 reginfo0;
2058 struct {
2059 /* note: power unit is 0.5 dBm */
2060 u8 min_power;
2061 u8 max_power;
2062 u8 reg_power;
2063 u8 reg_classid;
2064 } __packed;
2065 } __packed;
2066 union {
2067 __le32 reginfo1;
2068 struct {
2069 /* note: power unit is 1 dBm */
2070 u8 antenna_max;
2071 /* note: power unit is 0.5 dBm */
2072 u8 max_tx_power;
2073 } __packed;
2074 } __packed;
2075} __packed;
2076
2077struct wmi_channel_arg {
2078 u32 freq;
2079 u32 band_center_freq1;
2080 u32 band_center_freq2;
2081 bool passive;
2082 bool allow_ibss;
2083 bool allow_ht;
2084 bool allow_vht;
2085 bool ht40plus;
2086 bool chan_radar;
2087 /* note: power unit is 0.5 dBm */
2088 u32 min_power;
2089 u32 max_power;
2090 u32 max_reg_power;
2091 /* note: power unit is 1 dBm */
2092 u32 max_antenna_gain;
2093 u32 reg_class_id;
2094 enum wmi_phy_mode mode;
2095};
2096
2097enum wmi_channel_change_cause {
2098 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2099 WMI_CHANNEL_CHANGE_CAUSE_CSA,
2100};
2101
2102#define WMI_CHAN_FLAG_HT40_PLUS (1 << 6)
2103#define WMI_CHAN_FLAG_PASSIVE (1 << 7)
2104#define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8)
2105#define WMI_CHAN_FLAG_AP_DISABLED (1 << 9)
2106#define WMI_CHAN_FLAG_DFS (1 << 10)
2107#define WMI_CHAN_FLAG_ALLOW_HT (1 << 11)
2108#define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12)
2109
2110/* Indicate reason for channel switch */
2111#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2112/* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2113#define WMI_CHAN_FLAG_DFS_CFREQ2 (1 << 15)
2114#define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
2115
2116/* HT Capabilities*/
2117#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
2118#define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */
2119#define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */
2120#define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */
2121#define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3
2122#define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */
2123#define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4
2124#define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */
2125#define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */
2126#define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
2127#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2128#define WMI_HT_CAP_HT40_SGI 0x0800
2129#define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */
2130#define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */
2131
2132#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \
2133 WMI_HT_CAP_HT20_SGI | \
2134 WMI_HT_CAP_HT40_SGI | \
2135 WMI_HT_CAP_TX_STBC | \
2136 WMI_HT_CAP_RX_STBC | \
2137 WMI_HT_CAP_LDPC)
2138
2139/*
2140 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2141 * field. The fields not defined here are not supported, or reserved.
2142 * Do not change these masks and if you have to add new one follow the
2143 * bitmask as specified by 802.11ac draft.
2144 */
2145
2146#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
2147#define WMI_VHT_CAP_RX_LDPC 0x00000010
2148#define WMI_VHT_CAP_SGI_80MHZ 0x00000020
2149#define WMI_VHT_CAP_SGI_160MHZ 0x00000040
2150#define WMI_VHT_CAP_TX_STBC 0x00000080
2151#define WMI_VHT_CAP_RX_STBC_MASK 0x00000300
2152#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8
2153#define WMI_VHT_CAP_SU_BFER 0x00000800
2154#define WMI_VHT_CAP_SU_BFEE 0x00001000
2155#define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000
2156#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13
2157#define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000
2158#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16
2159#define WMI_VHT_CAP_MU_BFER 0x00080000
2160#define WMI_VHT_CAP_MU_BFEE 0x00100000
2161#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
2162#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
2163#define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
2164#define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
2165
2166/* The following also refer for max HT AMSDU */
2167#define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000
2168#define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001
2169#define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
2170
2171#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \
2172 WMI_VHT_CAP_RX_LDPC | \
2173 WMI_VHT_CAP_SGI_80MHZ | \
2174 WMI_VHT_CAP_TX_STBC | \
2175 WMI_VHT_CAP_RX_STBC_MASK | \
2176 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
2177 WMI_VHT_CAP_RX_FIXED_ANT | \
2178 WMI_VHT_CAP_TX_FIXED_ANT)
2179
2180/*
2181 * Interested readers refer to Rx/Tx MCS Map definition as defined in
2182 * 802.11ac
2183 */
2184#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
2185#define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
2186#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
2187
2188enum {
2189 REGDMN_MODE_11A = 0x00001, /* 11a channels */
2190 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */
2191 REGDMN_MODE_11B = 0x00004, /* 11b channels */
2192 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */
2193 REGDMN_MODE_11G = 0x00008, /* XXX historical */
2194 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */
2195 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */
2196 REGDMN_MODE_XR = 0x00100, /* XR channels */
2197 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */
2198 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2199 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */
2200 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */
2201 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */
2202 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */
2203 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */
2204 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */
2205 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */
2206 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */
2207 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */
2208 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */
2209 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */
2210 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */
2211 REGDMN_MODE_ALL = 0xffffffff
2212};
2213
2214#define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001
2215#define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002
2216#define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004
2217
2218/* regulatory capabilities */
2219#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040
2220#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080
2221#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100
2222#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200
2223#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400
2224#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800
2225
2226struct hal_reg_capabilities {
2227 /* regdomain value specified in EEPROM */
2228 __le32 eeprom_rd;
2229 /*regdomain */
2230 __le32 eeprom_rd_ext;
2231 /* CAP1 capabilities bit map. */
2232 __le32 regcap1;
2233 /* REGDMN EEPROM CAP. */
2234 __le32 regcap2;
2235 /* REGDMN MODE */
2236 __le32 wireless_modes;
2237 __le32 low_2ghz_chan;
2238 __le32 high_2ghz_chan;
2239 __le32 low_5ghz_chan;
2240 __le32 high_5ghz_chan;
2241} __packed;
2242
2243enum wlan_mode_capability {
2244 WHAL_WLAN_11A_CAPABILITY = 0x1,
2245 WHAL_WLAN_11G_CAPABILITY = 0x2,
2246 WHAL_WLAN_11AG_CAPABILITY = 0x3,
2247};
2248
2249/* structure used by FW for requesting host memory */
2250struct wlan_host_mem_req {
2251 /* ID of the request */
2252 __le32 req_id;
2253 /* size of the of each unit */
2254 __le32 unit_size;
2255 /* flags to indicate that
2256 * the number units is dependent
2257 * on number of resources(num vdevs num peers .. etc)
2258 */
2259 __le32 num_unit_info;
2260 /*
2261 * actual number of units to allocate . if flags in the num_unit_info
2262 * indicate that number of units is tied to number of a particular
2263 * resource to allocate then num_units filed is set to 0 and host
2264 * will derive the number units from number of the resources it is
2265 * requesting.
2266 */
2267 __le32 num_units;
2268} __packed;
2269
2270/*
2271 * The following struct holds optional payload for
2272 * wmi_service_ready_event,e.g., 11ac pass some of the
2273 * device capability to the host.
2274 */
2275struct wmi_service_ready_event {
2276 __le32 sw_version;
2277 __le32 sw_version_1;
2278 __le32 abi_version;
2279 /* WMI_PHY_CAPABILITY */
2280 __le32 phy_capability;
2281 /* Maximum number of frag table entries that SW will populate less 1 */
2282 __le32 max_frag_entry;
2283 __le32 wmi_service_bitmap[16];
2284 __le32 num_rf_chains;
2285 /*
2286 * The following field is only valid for service type
2287 * WMI_SERVICE_11AC
2288 */
2289 __le32 ht_cap_info; /* WMI HT Capability */
2290 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2291 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2292 __le32 hw_min_tx_power;
2293 __le32 hw_max_tx_power;
2294 struct hal_reg_capabilities hal_reg_capabilities;
2295 __le32 sys_cap_info;
2296 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2297 /*
2298 * Max beacon and Probe Response IE offload size
2299 * (includes optional P2P IEs)
2300 */
2301 __le32 max_bcn_ie_size;
2302 /*
2303 * request to host to allocate a chuck of memory and pss it down to FW
2304 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2305 * data structures. Only valid for low latency interfaces like PCIE
2306 * where FW can access this memory directly (or) by DMA.
2307 */
2308 __le32 num_mem_reqs;
2309 struct wlan_host_mem_req mem_reqs[];
2310} __packed;
2311
2312/* This is the definition from 10.X firmware branch */
2313struct wmi_10x_service_ready_event {
2314 __le32 sw_version;
2315 __le32 abi_version;
2316
2317 /* WMI_PHY_CAPABILITY */
2318 __le32 phy_capability;
2319
2320 /* Maximum number of frag table entries that SW will populate less 1 */
2321 __le32 max_frag_entry;
2322 __le32 wmi_service_bitmap[16];
2323 __le32 num_rf_chains;
2324
2325 /*
2326 * The following field is only valid for service type
2327 * WMI_SERVICE_11AC
2328 */
2329 __le32 ht_cap_info; /* WMI HT Capability */
2330 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2331 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2332 __le32 hw_min_tx_power;
2333 __le32 hw_max_tx_power;
2334
2335 struct hal_reg_capabilities hal_reg_capabilities;
2336
2337 __le32 sys_cap_info;
2338 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2339
2340 /*
2341 * request to host to allocate a chuck of memory and pss it down to FW
2342 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2343 * data structures. Only valid for low latency interfaces like PCIE
2344 * where FW can access this memory directly (or) by DMA.
2345 */
2346 __le32 num_mem_reqs;
2347
2348 struct wlan_host_mem_req mem_reqs[];
2349} __packed;
2350
2351#define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2352#define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2353
2354struct wmi_ready_event {
2355 __le32 sw_version;
2356 __le32 abi_version;
2357 struct wmi_mac_addr mac_addr;
2358 __le32 status;
2359} __packed;
2360
2361struct wmi_resource_config {
2362 /* number of virtual devices (VAPs) to support */
2363 __le32 num_vdevs;
2364
2365 /* number of peer nodes to support */
2366 __le32 num_peers;
2367
2368 /*
2369 * In offload mode target supports features like WOW, chatter and
2370 * other protocol offloads. In order to support them some
2371 * functionalities like reorder buffering, PN checking need to be
2372 * done in target. This determines maximum number of peers supported
2373 * by target in offload mode
2374 */
2375 __le32 num_offload_peers;
2376
2377 /* For target-based RX reordering */
2378 __le32 num_offload_reorder_bufs;
2379
2380 /* number of keys per peer */
2381 __le32 num_peer_keys;
2382
2383 /* total number of TX/RX data TIDs */
2384 __le32 num_tids;
2385
2386 /*
2387 * max skid for resolving hash collisions
2388 *
2389 * The address search table is sparse, so that if two MAC addresses
2390 * result in the same hash value, the second of these conflicting
2391 * entries can slide to the next index in the address search table,
2392 * and use it, if it is unoccupied. This ast_skid_limit parameter
2393 * specifies the upper bound on how many subsequent indices to search
2394 * over to find an unoccupied space.
2395 */
2396 __le32 ast_skid_limit;
2397
2398 /*
2399 * the nominal chain mask for transmit
2400 *
2401 * The chain mask may be modified dynamically, e.g. to operate AP
2402 * tx with a reduced number of chains if no clients are associated.
2403 * This configuration parameter specifies the nominal chain-mask that
2404 * should be used when not operating with a reduced set of tx chains.
2405 */
2406 __le32 tx_chain_mask;
2407
2408 /*
2409 * the nominal chain mask for receive
2410 *
2411 * The chain mask may be modified dynamically, e.g. for a client
2412 * to use a reduced number of chains for receive if the traffic to
2413 * the client is low enough that it doesn't require downlink MIMO
2414 * or antenna diversity.
2415 * This configuration parameter specifies the nominal chain-mask that
2416 * should be used when not operating with a reduced set of rx chains.
2417 */
2418 __le32 rx_chain_mask;
2419
2420 /*
2421 * what rx reorder timeout (ms) to use for the AC
2422 *
2423 * Each WMM access class (voice, video, best-effort, background) will
2424 * have its own timeout value to dictate how long to wait for missing
2425 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2426 * already been received.
2427 * This parameter specifies the timeout in milliseconds for each
2428 * class.
2429 */
2430 __le32 rx_timeout_pri_vi;
2431 __le32 rx_timeout_pri_vo;
2432 __le32 rx_timeout_pri_be;
2433 __le32 rx_timeout_pri_bk;
2434
2435 /*
2436 * what mode the rx should decap packets to
2437 *
2438 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2439 * THis setting also determines the default TX behavior, however TX
2440 * behavior can be modified on a per VAP basis during VAP init
2441 */
2442 __le32 rx_decap_mode;
2443
2444 /* what is the maximum number of scan requests that can be queued */
2445 __le32 scan_max_pending_reqs;
2446
2447 /* maximum VDEV that could use BMISS offload */
2448 __le32 bmiss_offload_max_vdev;
2449
2450 /* maximum VDEV that could use offload roaming */
2451 __le32 roam_offload_max_vdev;
2452
2453 /* maximum AP profiles that would push to offload roaming */
2454 __le32 roam_offload_max_ap_profiles;
2455
2456 /*
2457 * how many groups to use for mcast->ucast conversion
2458 *
2459 * The target's WAL maintains a table to hold information regarding
2460 * which peers belong to a given multicast group, so that if
2461 * multicast->unicast conversion is enabled, the target can convert
2462 * multicast tx frames to a series of unicast tx frames, to each
2463 * peer within the multicast group.
2464 This num_mcast_groups configuration parameter tells the target how
2465 * many multicast groups to provide storage for within its multicast
2466 * group membership table.
2467 */
2468 __le32 num_mcast_groups;
2469
2470 /*
2471 * size to alloc for the mcast membership table
2472 *
2473 * This num_mcast_table_elems configuration parameter tells the
2474 * target how many peer elements it needs to provide storage for in
2475 * its multicast group membership table.
2476 * These multicast group membership table elements are shared by the
2477 * multicast groups stored within the table.
2478 */
2479 __le32 num_mcast_table_elems;
2480
2481 /*
2482 * whether/how to do multicast->unicast conversion
2483 *
2484 * This configuration parameter specifies whether the target should
2485 * perform multicast --> unicast conversion on transmit, and if so,
2486 * what to do if it finds no entries in its multicast group
2487 * membership table for the multicast IP address in the tx frame.
2488 * Configuration value:
2489 * 0 -> Do not perform multicast to unicast conversion.
2490 * 1 -> Convert multicast frames to unicast, if the IP multicast
2491 * address from the tx frame is found in the multicast group
2492 * membership table. If the IP multicast address is not found,
2493 * drop the frame.
2494 * 2 -> Convert multicast frames to unicast, if the IP multicast
2495 * address from the tx frame is found in the multicast group
2496 * membership table. If the IP multicast address is not found,
2497 * transmit the frame as multicast.
2498 */
2499 __le32 mcast2ucast_mode;
2500
2501 /*
2502 * how much memory to allocate for a tx PPDU dbg log
2503 *
2504 * This parameter controls how much memory the target will allocate
2505 * to store a log of tx PPDU meta-information (how large the PPDU
2506 * was, when it was sent, whether it was successful, etc.)
2507 */
2508 __le32 tx_dbg_log_size;
2509
2510 /* how many AST entries to be allocated for WDS */
2511 __le32 num_wds_entries;
2512
2513 /*
2514 * MAC DMA burst size, e.g., For target PCI limit can be
2515 * 0 -default, 1 256B
2516 */
2517 __le32 dma_burst_size;
2518
2519 /*
2520 * Fixed delimiters to be inserted after every MPDU to
2521 * account for interface latency to avoid underrun.
2522 */
2523 __le32 mac_aggr_delim;
2524
2525 /*
2526 * determine whether target is responsible for detecting duplicate
2527 * non-aggregate MPDU and timing out stale fragments.
2528 *
2529 * A-MPDU reordering is always performed on the target.
2530 *
2531 * 0: target responsible for frag timeout and dup checking
2532 * 1: host responsible for frag timeout and dup checking
2533 */
2534 __le32 rx_skip_defrag_timeout_dup_detection_check;
2535
2536 /*
2537 * Configuration for VoW :
2538 * No of Video Nodes to be supported
2539 * and Max no of descriptors for each Video link (node).
2540 */
2541 __le32 vow_config;
2542
2543 /* maximum VDEV that could use GTK offload */
2544 __le32 gtk_offload_max_vdev;
2545
2546 /* Number of msdu descriptors target should use */
2547 __le32 num_msdu_desc;
2548
2549 /*
2550 * Max. number of Tx fragments per MSDU
2551 * This parameter controls the max number of Tx fragments per MSDU.
2552 * This is sent by the target as part of the WMI_SERVICE_READY event
2553 * and is overridden by the OS shim as required.
2554 */
2555 __le32 max_frag_entries;
2556} __packed;
2557
2558struct wmi_resource_config_10x {
2559 /* number of virtual devices (VAPs) to support */
2560 __le32 num_vdevs;
2561
2562 /* number of peer nodes to support */
2563 __le32 num_peers;
2564
2565 /* number of keys per peer */
2566 __le32 num_peer_keys;
2567
2568 /* total number of TX/RX data TIDs */
2569 __le32 num_tids;
2570
2571 /*
2572 * max skid for resolving hash collisions
2573 *
2574 * The address search table is sparse, so that if two MAC addresses
2575 * result in the same hash value, the second of these conflicting
2576 * entries can slide to the next index in the address search table,
2577 * and use it, if it is unoccupied. This ast_skid_limit parameter
2578 * specifies the upper bound on how many subsequent indices to search
2579 * over to find an unoccupied space.
2580 */
2581 __le32 ast_skid_limit;
2582
2583 /*
2584 * the nominal chain mask for transmit
2585 *
2586 * The chain mask may be modified dynamically, e.g. to operate AP
2587 * tx with a reduced number of chains if no clients are associated.
2588 * This configuration parameter specifies the nominal chain-mask that
2589 * should be used when not operating with a reduced set of tx chains.
2590 */
2591 __le32 tx_chain_mask;
2592
2593 /*
2594 * the nominal chain mask for receive
2595 *
2596 * The chain mask may be modified dynamically, e.g. for a client
2597 * to use a reduced number of chains for receive if the traffic to
2598 * the client is low enough that it doesn't require downlink MIMO
2599 * or antenna diversity.
2600 * This configuration parameter specifies the nominal chain-mask that
2601 * should be used when not operating with a reduced set of rx chains.
2602 */
2603 __le32 rx_chain_mask;
2604
2605 /*
2606 * what rx reorder timeout (ms) to use for the AC
2607 *
2608 * Each WMM access class (voice, video, best-effort, background) will
2609 * have its own timeout value to dictate how long to wait for missing
2610 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2611 * already been received.
2612 * This parameter specifies the timeout in milliseconds for each
2613 * class.
2614 */
2615 __le32 rx_timeout_pri_vi;
2616 __le32 rx_timeout_pri_vo;
2617 __le32 rx_timeout_pri_be;
2618 __le32 rx_timeout_pri_bk;
2619
2620 /*
2621 * what mode the rx should decap packets to
2622 *
2623 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2624 * THis setting also determines the default TX behavior, however TX
2625 * behavior can be modified on a per VAP basis during VAP init
2626 */
2627 __le32 rx_decap_mode;
2628
2629 /* what is the maximum number of scan requests that can be queued */
2630 __le32 scan_max_pending_reqs;
2631
2632 /* maximum VDEV that could use BMISS offload */
2633 __le32 bmiss_offload_max_vdev;
2634
2635 /* maximum VDEV that could use offload roaming */
2636 __le32 roam_offload_max_vdev;
2637
2638 /* maximum AP profiles that would push to offload roaming */
2639 __le32 roam_offload_max_ap_profiles;
2640
2641 /*
2642 * how many groups to use for mcast->ucast conversion
2643 *
2644 * The target's WAL maintains a table to hold information regarding
2645 * which peers belong to a given multicast group, so that if
2646 * multicast->unicast conversion is enabled, the target can convert
2647 * multicast tx frames to a series of unicast tx frames, to each
2648 * peer within the multicast group.
2649 This num_mcast_groups configuration parameter tells the target how
2650 * many multicast groups to provide storage for within its multicast
2651 * group membership table.
2652 */
2653 __le32 num_mcast_groups;
2654
2655 /*
2656 * size to alloc for the mcast membership table
2657 *
2658 * This num_mcast_table_elems configuration parameter tells the
2659 * target how many peer elements it needs to provide storage for in
2660 * its multicast group membership table.
2661 * These multicast group membership table elements are shared by the
2662 * multicast groups stored within the table.
2663 */
2664 __le32 num_mcast_table_elems;
2665
2666 /*
2667 * whether/how to do multicast->unicast conversion
2668 *
2669 * This configuration parameter specifies whether the target should
2670 * perform multicast --> unicast conversion on transmit, and if so,
2671 * what to do if it finds no entries in its multicast group
2672 * membership table for the multicast IP address in the tx frame.
2673 * Configuration value:
2674 * 0 -> Do not perform multicast to unicast conversion.
2675 * 1 -> Convert multicast frames to unicast, if the IP multicast
2676 * address from the tx frame is found in the multicast group
2677 * membership table. If the IP multicast address is not found,
2678 * drop the frame.
2679 * 2 -> Convert multicast frames to unicast, if the IP multicast
2680 * address from the tx frame is found in the multicast group
2681 * membership table. If the IP multicast address is not found,
2682 * transmit the frame as multicast.
2683 */
2684 __le32 mcast2ucast_mode;
2685
2686 /*
2687 * how much memory to allocate for a tx PPDU dbg log
2688 *
2689 * This parameter controls how much memory the target will allocate
2690 * to store a log of tx PPDU meta-information (how large the PPDU
2691 * was, when it was sent, whether it was successful, etc.)
2692 */
2693 __le32 tx_dbg_log_size;
2694
2695 /* how many AST entries to be allocated for WDS */
2696 __le32 num_wds_entries;
2697
2698 /*
2699 * MAC DMA burst size, e.g., For target PCI limit can be
2700 * 0 -default, 1 256B
2701 */
2702 __le32 dma_burst_size;
2703
2704 /*
2705 * Fixed delimiters to be inserted after every MPDU to
2706 * account for interface latency to avoid underrun.
2707 */
2708 __le32 mac_aggr_delim;
2709
2710 /*
2711 * determine whether target is responsible for detecting duplicate
2712 * non-aggregate MPDU and timing out stale fragments.
2713 *
2714 * A-MPDU reordering is always performed on the target.
2715 *
2716 * 0: target responsible for frag timeout and dup checking
2717 * 1: host responsible for frag timeout and dup checking
2718 */
2719 __le32 rx_skip_defrag_timeout_dup_detection_check;
2720
2721 /*
2722 * Configuration for VoW :
2723 * No of Video Nodes to be supported
2724 * and Max no of descriptors for each Video link (node).
2725 */
2726 __le32 vow_config;
2727
2728 /* Number of msdu descriptors target should use */
2729 __le32 num_msdu_desc;
2730
2731 /*
2732 * Max. number of Tx fragments per MSDU
2733 * This parameter controls the max number of Tx fragments per MSDU.
2734 * This is sent by the target as part of the WMI_SERVICE_READY event
2735 * and is overridden by the OS shim as required.
2736 */
2737 __le32 max_frag_entries;
2738} __packed;
2739
2740enum wmi_10_2_feature_mask {
2741 WMI_10_2_RX_BATCH_MODE = BIT(0),
2742 WMI_10_2_ATF_CONFIG = BIT(1),
2743 WMI_10_2_COEX_GPIO = BIT(3),
2744 WMI_10_2_BSS_CHAN_INFO = BIT(6),
2745 WMI_10_2_PEER_STATS = BIT(7),
2746};
2747
2748struct wmi_resource_config_10_2 {
2749 struct wmi_resource_config_10x common;
2750 __le32 max_peer_ext_stats;
2751 __le32 smart_ant_cap; /* 0-disable, 1-enable */
2752 __le32 bk_min_free;
2753 __le32 be_min_free;
2754 __le32 vi_min_free;
2755 __le32 vo_min_free;
2756 __le32 feature_mask;
2757} __packed;
2758
2759#define NUM_UNITS_IS_NUM_VDEVS BIT(0)
2760#define NUM_UNITS_IS_NUM_PEERS BIT(1)
2761#define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2)
2762
2763struct wmi_resource_config_10_4 {
2764 /* Number of virtual devices (VAPs) to support */
2765 __le32 num_vdevs;
2766
2767 /* Number of peer nodes to support */
2768 __le32 num_peers;
2769
2770 /* Number of active peer nodes to support */
2771 __le32 num_active_peers;
2772
2773 /* In offload mode, target supports features like WOW, chatter and other
2774 * protocol offloads. In order to support them some functionalities like
2775 * reorder buffering, PN checking need to be done in target.
2776 * This determines maximum number of peers supported by target in
2777 * offload mode.
2778 */
2779 __le32 num_offload_peers;
2780
2781 /* Number of reorder buffers available for doing target based reorder
2782 * Rx reorder buffering
2783 */
2784 __le32 num_offload_reorder_buffs;
2785
2786 /* Number of keys per peer */
2787 __le32 num_peer_keys;
2788
2789 /* Total number of TX/RX data TIDs */
2790 __le32 num_tids;
2791
2792 /* Max skid for resolving hash collisions.
2793 * The address search table is sparse, so that if two MAC addresses
2794 * result in the same hash value, the second of these conflicting
2795 * entries can slide to the next index in the address search table,
2796 * and use it, if it is unoccupied. This ast_skid_limit parameter
2797 * specifies the upper bound on how many subsequent indices to search
2798 * over to find an unoccupied space.
2799 */
2800 __le32 ast_skid_limit;
2801
2802 /* The nominal chain mask for transmit.
2803 * The chain mask may be modified dynamically, e.g. to operate AP tx
2804 * with a reduced number of chains if no clients are associated.
2805 * This configuration parameter specifies the nominal chain-mask that
2806 * should be used when not operating with a reduced set of tx chains.
2807 */
2808 __le32 tx_chain_mask;
2809
2810 /* The nominal chain mask for receive.
2811 * The chain mask may be modified dynamically, e.g. for a client to use
2812 * a reduced number of chains for receive if the traffic to the client
2813 * is low enough that it doesn't require downlink MIMO or antenna
2814 * diversity. This configuration parameter specifies the nominal
2815 * chain-mask that should be used when not operating with a reduced
2816 * set of rx chains.
2817 */
2818 __le32 rx_chain_mask;
2819
2820 /* What rx reorder timeout (ms) to use for the AC.
2821 * Each WMM access class (voice, video, best-effort, background) will
2822 * have its own timeout value to dictate how long to wait for missing
2823 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2824 * been received. This parameter specifies the timeout in milliseconds
2825 * for each class.
2826 */
2827 __le32 rx_timeout_pri[4];
2828
2829 /* What mode the rx should decap packets to.
2830 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2831 * This setting also determines the default TX behavior, however TX
2832 * behavior can be modified on a per VAP basis during VAP init
2833 */
2834 __le32 rx_decap_mode;
2835
2836 __le32 scan_max_pending_req;
2837
2838 __le32 bmiss_offload_max_vdev;
2839
2840 __le32 roam_offload_max_vdev;
2841
2842 __le32 roam_offload_max_ap_profiles;
2843
2844 /* How many groups to use for mcast->ucast conversion.
2845 * The target's WAL maintains a table to hold information regarding
2846 * which peers belong to a given multicast group, so that if
2847 * multicast->unicast conversion is enabled, the target can convert
2848 * multicast tx frames to a series of unicast tx frames, to each peer
2849 * within the multicast group. This num_mcast_groups configuration
2850 * parameter tells the target how many multicast groups to provide
2851 * storage for within its multicast group membership table.
2852 */
2853 __le32 num_mcast_groups;
2854
2855 /* Size to alloc for the mcast membership table.
2856 * This num_mcast_table_elems configuration parameter tells the target
2857 * how many peer elements it needs to provide storage for in its
2858 * multicast group membership table. These multicast group membership
2859 * table elements are shared by the multicast groups stored within
2860 * the table.
2861 */
2862 __le32 num_mcast_table_elems;
2863
2864 /* Whether/how to do multicast->unicast conversion.
2865 * This configuration parameter specifies whether the target should
2866 * perform multicast --> unicast conversion on transmit, and if so,
2867 * what to do if it finds no entries in its multicast group membership
2868 * table for the multicast IP address in the tx frame.
2869 * Configuration value:
2870 * 0 -> Do not perform multicast to unicast conversion.
2871 * 1 -> Convert multicast frames to unicast, if the IP multicast address
2872 * from the tx frame is found in the multicast group membership
2873 * table. If the IP multicast address is not found, drop the frame
2874 * 2 -> Convert multicast frames to unicast, if the IP multicast address
2875 * from the tx frame is found in the multicast group membership
2876 * table. If the IP multicast address is not found, transmit the
2877 * frame as multicast.
2878 */
2879 __le32 mcast2ucast_mode;
2880
2881 /* How much memory to allocate for a tx PPDU dbg log.
2882 * This parameter controls how much memory the target will allocate to
2883 * store a log of tx PPDU meta-information (how large the PPDU was,
2884 * when it was sent, whether it was successful, etc.)
2885 */
2886 __le32 tx_dbg_log_size;
2887
2888 /* How many AST entries to be allocated for WDS */
2889 __le32 num_wds_entries;
2890
2891 /* MAC DMA burst size. 0 -default, 1 -256B */
2892 __le32 dma_burst_size;
2893
2894 /* Fixed delimiters to be inserted after every MPDU to account for
2895 * interface latency to avoid underrun.
2896 */
2897 __le32 mac_aggr_delim;
2898
2899 /* Determine whether target is responsible for detecting duplicate
2900 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2901 * is always performed on the target.
2902 *
2903 * 0: target responsible for frag timeout and dup checking
2904 * 1: host responsible for frag timeout and dup checking
2905 */
2906 __le32 rx_skip_defrag_timeout_dup_detection_check;
2907
2908 /* Configuration for VoW : No of Video nodes to be supported and max
2909 * no of descriptors for each video link (node).
2910 */
2911 __le32 vow_config;
2912
2913 /* Maximum vdev that could use gtk offload */
2914 __le32 gtk_offload_max_vdev;
2915
2916 /* Number of msdu descriptors target should use */
2917 __le32 num_msdu_desc;
2918
2919 /* Max number of tx fragments per MSDU.
2920 * This parameter controls the max number of tx fragments per MSDU.
2921 * This will passed by target as part of the WMI_SERVICE_READY event
2922 * and is overridden by the OS shim as required.
2923 */
2924 __le32 max_frag_entries;
2925
2926 /* Max number of extended peer stats.
2927 * This parameter controls the max number of peers for which extended
2928 * statistics are supported by target
2929 */
2930 __le32 max_peer_ext_stats;
2931
2932 /* Smart antenna capabilities information.
2933 * 1 - Smart antenna is enabled
2934 * 0 - Smart antenna is disabled
2935 * In future this can contain smart antenna specific capabilities.
2936 */
2937 __le32 smart_ant_cap;
2938
2939 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2940 * during init.
2941 */
2942 __le32 bk_minfree;
2943 __le32 be_minfree;
2944 __le32 vi_minfree;
2945 __le32 vo_minfree;
2946
2947 /* Rx batch mode capability.
2948 * 1 - Rx batch mode enabled
2949 * 0 - Rx batch mode disabled
2950 */
2951 __le32 rx_batchmode;
2952
2953 /* Thermal throttling capability.
2954 * 1 - Capable of thermal throttling
2955 * 0 - Not capable of thermal throttling
2956 */
2957 __le32 tt_support;
2958
2959 /* ATF configuration.
2960 * 1 - Enable ATF
2961 * 0 - Disable ATF
2962 */
2963 __le32 atf_config;
2964
2965 /* Configure padding to manage IP header un-alignment
2966 * 1 - Enable padding
2967 * 0 - Disable padding
2968 */
2969 __le32 iphdr_pad_config;
2970
2971 /* qwrap configuration (bits 15-0)
2972 * 1 - This is qwrap configuration
2973 * 0 - This is not qwrap
2974 *
2975 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2976 * In order to get ack-RSSI reporting and to specify the tx-rate for
2977 * individual frames, this option must be enabled. This uses an extra
2978 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2979 */
2980 __le32 qwrap_config;
2981} __packed;
2982
2983enum wmi_coex_version {
2984 WMI_NO_COEX_VERSION_SUPPORT = 0,
2985 /* 3 wire coex support*/
2986 WMI_COEX_VERSION_1 = 1,
2987 /* 2.5 wire coex support*/
2988 WMI_COEX_VERSION_2 = 2,
2989 /* 2.5 wire coex with duty cycle support */
2990 WMI_COEX_VERSION_3 = 3,
2991 /* 4 wire coex support*/
2992 WMI_COEX_VERSION_4 = 4,
2993};
2994
2995/**
2996 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2997 * @WMI_10_4_LTEU_SUPPORT: LTEU config
2998 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
2999 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
3000 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
3001 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
3002 * @WMI_10_4_PEER_STATS: Per station stats
3003 * @WMI_10_4_VDEV_STATS: Per vdev stats
3004 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3005 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3006 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3007 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3008 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3009 * enable/disable
3010 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
3011 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3012 */
3013enum wmi_10_4_feature_mask {
3014 WMI_10_4_LTEU_SUPPORT = BIT(0),
3015 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1),
3016 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2),
3017 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3),
3018 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4),
3019 WMI_10_4_PEER_STATS = BIT(5),
3020 WMI_10_4_VDEV_STATS = BIT(6),
3021 WMI_10_4_TDLS = BIT(7),
3022 WMI_10_4_TDLS_OFFCHAN = BIT(8),
3023 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9),
3024 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10),
3025 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3026 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12),
3027 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16),
3028 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17),
3029 WMI_10_4_REPORT_AIRTIME = BIT(18),
3030
3031};
3032
3033struct wmi_ext_resource_config_10_4_cmd {
3034 /* contains enum wmi_host_platform_type */
3035 __le32 host_platform_config;
3036 /* see enum wmi_10_4_feature_mask */
3037 __le32 fw_feature_bitmap;
3038 /* WLAN priority GPIO number */
3039 __le32 wlan_gpio_priority;
3040 /* see enum wmi_coex_version */
3041 __le32 coex_version;
3042 /* COEX GPIO config */
3043 __le32 coex_gpio_pin1;
3044 __le32 coex_gpio_pin2;
3045 __le32 coex_gpio_pin3;
3046 /* number of vdevs allowed to perform tdls */
3047 __le32 num_tdls_vdevs;
3048 /* number of peers to track per TDLS vdev */
3049 __le32 num_tdls_conn_table_entries;
3050 /* number of tdls sleep sta supported */
3051 __le32 max_tdls_concurrent_sleep_sta;
3052 /* number of tdls buffer sta supported */
3053 __le32 max_tdls_concurrent_buffer_sta;
3054};
3055
3056/* structure describing host memory chunk. */
3057struct host_memory_chunk {
3058 /* id of the request that is passed up in service ready */
3059 __le32 req_id;
3060 /* the physical address the memory chunk */
3061 __le32 ptr;
3062 /* size of the chunk */
3063 __le32 size;
3064} __packed;
3065
3066#define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3067
3068struct wmi_host_mem_chunks {
3069 __le32 count;
3070 /* some fw revisions require at least 1 chunk regardless of count */
3071 struct host_memory_chunk items[1];
3072} __packed;
3073
3074struct wmi_init_cmd {
3075 struct wmi_resource_config resource_config;
3076 struct wmi_host_mem_chunks mem_chunks;
3077} __packed;
3078
3079/* _10x structure is from 10.X FW API */
3080struct wmi_init_cmd_10x {
3081 struct wmi_resource_config_10x resource_config;
3082 struct wmi_host_mem_chunks mem_chunks;
3083} __packed;
3084
3085struct wmi_init_cmd_10_2 {
3086 struct wmi_resource_config_10_2 resource_config;
3087 struct wmi_host_mem_chunks mem_chunks;
3088} __packed;
3089
3090struct wmi_init_cmd_10_4 {
3091 struct wmi_resource_config_10_4 resource_config;
3092 struct wmi_host_mem_chunks mem_chunks;
3093} __packed;
3094
3095struct wmi_chan_list_entry {
3096 __le16 freq;
3097 u8 phy_mode; /* valid for 10.2 only */
3098 u8 reserved;
3099} __packed;
3100
3101/* TLV for channel list */
3102struct wmi_chan_list {
3103 __le32 tag; /* WMI_CHAN_LIST_TAG */
3104 __le32 num_chan;
3105 struct wmi_chan_list_entry channel_list[];
3106} __packed;
3107
3108struct wmi_bssid_list {
3109 __le32 tag; /* WMI_BSSID_LIST_TAG */
3110 __le32 num_bssid;
3111 struct wmi_mac_addr bssid_list[];
3112} __packed;
3113
3114struct wmi_ie_data {
3115 __le32 tag; /* WMI_IE_TAG */
3116 __le32 ie_len;
3117 u8 ie_data[];
3118} __packed;
3119
3120struct wmi_ssid {
3121 __le32 ssid_len;
3122 u8 ssid[32];
3123} __packed;
3124
3125struct wmi_ssid_list {
3126 __le32 tag; /* WMI_SSID_LIST_TAG */
3127 __le32 num_ssids;
3128 struct wmi_ssid ssids[];
3129} __packed;
3130
3131/* prefix used by scan requestor ids on the host */
3132#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3133
3134/* prefix used by scan request ids generated on the host */
3135/* host cycles through the lower 12 bits to generate ids */
3136#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3137
3138#define WLAN_SCAN_PARAMS_MAX_SSID 16
3139#define WLAN_SCAN_PARAMS_MAX_BSSID 4
3140#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
3141
3142/* Values lower than this may be refused by some firmware revisions with a scan
3143 * completion with a timedout reason.
3144 */
3145#define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3146
3147/* Scan priority numbers must be sequential, starting with 0 */
3148enum wmi_scan_priority {
3149 WMI_SCAN_PRIORITY_VERY_LOW = 0,
3150 WMI_SCAN_PRIORITY_LOW,
3151 WMI_SCAN_PRIORITY_MEDIUM,
3152 WMI_SCAN_PRIORITY_HIGH,
3153 WMI_SCAN_PRIORITY_VERY_HIGH,
3154 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
3155};
3156
3157struct wmi_start_scan_common {
3158 /* Scan ID */
3159 __le32 scan_id;
3160 /* Scan requestor ID */
3161 __le32 scan_req_id;
3162 /* VDEV id(interface) that is requesting scan */
3163 __le32 vdev_id;
3164 /* Scan Priority, input to scan scheduler */
3165 __le32 scan_priority;
3166 /* Scan events subscription */
3167 __le32 notify_scan_events;
3168 /* dwell time in msec on active channels */
3169 __le32 dwell_time_active;
3170 /* dwell time in msec on passive channels */
3171 __le32 dwell_time_passive;
3172 /*
3173 * min time in msec on the BSS channel,only valid if at least one
3174 * VDEV is active
3175 */
3176 __le32 min_rest_time;
3177 /*
3178 * max rest time in msec on the BSS channel,only valid if at least
3179 * one VDEV is active
3180 */
3181 /*
3182 * the scanner will rest on the bss channel at least min_rest_time
3183 * after min_rest_time the scanner will start checking for tx/rx
3184 * activity on all VDEVs. if there is no activity the scanner will
3185 * switch to off channel. if there is activity the scanner will let
3186 * the radio on the bss channel until max_rest_time expires.at
3187 * max_rest_time scanner will switch to off channel irrespective of
3188 * activity. activity is determined by the idle_time parameter.
3189 */
3190 __le32 max_rest_time;
3191 /*
3192 * time before sending next set of probe requests.
3193 * The scanner keeps repeating probe requests transmission with
3194 * period specified by repeat_probe_time.
3195 * The number of probe requests specified depends on the ssid_list
3196 * and bssid_list
3197 */
3198 __le32 repeat_probe_time;
3199 /* time in msec between 2 consecutive probe requests with in a set. */
3200 __le32 probe_spacing_time;
3201 /*
3202 * data inactivity time in msec on bss channel that will be used by
3203 * scanner for measuring the inactivity.
3204 */
3205 __le32 idle_time;
3206 /* maximum time in msec allowed for scan */
3207 __le32 max_scan_time;
3208 /*
3209 * delay in msec before sending first probe request after switching
3210 * to a channel
3211 */
3212 __le32 probe_delay;
3213 /* Scan control flags */
3214 __le32 scan_ctrl_flags;
3215} __packed;
3216
3217struct wmi_start_scan_tlvs {
3218 /* TLV parameters. These includes channel list, ssid list, bssid list,
3219 * extra ies.
3220 */
3221 u8 tlvs[0];
3222} __packed;
3223
3224struct wmi_start_scan_cmd {
3225 struct wmi_start_scan_common common;
3226 __le32 burst_duration_ms;
3227 struct wmi_start_scan_tlvs tlvs;
3228} __packed;
3229
3230/* This is the definition from 10.X firmware branch */
3231struct wmi_10x_start_scan_cmd {
3232 struct wmi_start_scan_common common;
3233 struct wmi_start_scan_tlvs tlvs;
3234} __packed;
3235
3236struct wmi_ssid_arg {
3237 int len;
3238 const u8 *ssid;
3239};
3240
3241struct wmi_bssid_arg {
3242 const u8 *bssid;
3243};
3244
3245struct wmi_start_scan_arg {
3246 u32 scan_id;
3247 u32 scan_req_id;
3248 u32 vdev_id;
3249 u32 scan_priority;
3250 u32 notify_scan_events;
3251 u32 dwell_time_active;
3252 u32 dwell_time_passive;
3253 u32 min_rest_time;
3254 u32 max_rest_time;
3255 u32 repeat_probe_time;
3256 u32 probe_spacing_time;
3257 u32 idle_time;
3258 u32 max_scan_time;
3259 u32 probe_delay;
3260 u32 scan_ctrl_flags;
3261 u32 burst_duration_ms;
3262
3263 u32 ie_len;
3264 u32 n_channels;
3265 u32 n_ssids;
3266 u32 n_bssids;
3267
3268 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3269 u16 channels[64];
3270 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3271 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3272 struct wmi_mac_addr mac_addr;
3273 struct wmi_mac_addr mac_mask;
3274};
3275
3276/* scan control flags */
3277
3278/* passively scan all channels including active channels */
3279#define WMI_SCAN_FLAG_PASSIVE 0x1
3280/* add wild card ssid probe request even though ssid_list is specified. */
3281#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3282/* add cck rates to rates/xrate ie for the generated probe request */
3283#define WMI_SCAN_ADD_CCK_RATES 0x4
3284/* add ofdm rates to rates/xrate ie for the generated probe request */
3285#define WMI_SCAN_ADD_OFDM_RATES 0x8
3286/* To enable indication of Chan load and Noise floor to host */
3287#define WMI_SCAN_CHAN_STAT_EVENT 0x10
3288/* Filter Probe request frames */
3289#define WMI_SCAN_FILTER_PROBE_REQ 0x20
3290/* When set, DFS channels will not be scanned */
3291#define WMI_SCAN_BYPASS_DFS_CHN 0x40
3292/* Different FW scan engine may choose to bail out on errors.
3293 * Allow the driver to have influence over that.
3294 */
3295#define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3296
3297/* Use random MAC address for TA for Probe Request frame and add
3298 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3299 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3300 */
3301#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000
3302
3303/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3304#define WMI_SCAN_CLASS_MASK 0xFF000000
3305
3306enum wmi_stop_scan_type {
3307 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */
3308 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */
3309 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */
3310};
3311
3312struct wmi_stop_scan_cmd {
3313 __le32 scan_req_id;
3314 __le32 scan_id;
3315 __le32 req_type;
3316 __le32 vdev_id;
3317} __packed;
3318
3319struct wmi_stop_scan_arg {
3320 u32 req_id;
3321 enum wmi_stop_scan_type req_type;
3322 union {
3323 u32 scan_id;
3324 u32 vdev_id;
3325 } u;
3326};
3327
3328struct wmi_scan_chan_list_cmd {
3329 __le32 num_scan_chans;
3330 struct wmi_channel chan_info[];
3331} __packed;
3332
3333struct wmi_scan_chan_list_arg {
3334 u32 n_channels;
3335 struct wmi_channel_arg *channels;
3336};
3337
3338enum wmi_bss_filter {
3339 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */
3340 WMI_BSS_FILTER_ALL, /* all beacons forwarded */
3341 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */
3342 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3343 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */
3344 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */
3345 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */
3346 WMI_BSS_FILTER_LAST_BSS, /* marker only */
3347};
3348
3349enum wmi_scan_event_type {
3350 WMI_SCAN_EVENT_STARTED = BIT(0),
3351 WMI_SCAN_EVENT_COMPLETED = BIT(1),
3352 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2),
3353 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3),
3354 WMI_SCAN_EVENT_DEQUEUED = BIT(4),
3355 /* possibly by high-prio scan */
3356 WMI_SCAN_EVENT_PREEMPTED = BIT(5),
3357 WMI_SCAN_EVENT_START_FAILED = BIT(6),
3358 WMI_SCAN_EVENT_RESTARTED = BIT(7),
3359 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3360 WMI_SCAN_EVENT_MAX = BIT(15),
3361};
3362
3363enum wmi_scan_completion_reason {
3364 WMI_SCAN_REASON_COMPLETED,
3365 WMI_SCAN_REASON_CANCELLED,
3366 WMI_SCAN_REASON_PREEMPTED,
3367 WMI_SCAN_REASON_TIMEDOUT,
3368 WMI_SCAN_REASON_INTERNAL_FAILURE,
3369 WMI_SCAN_REASON_MAX,
3370};
3371
3372struct wmi_scan_event {
3373 __le32 event_type; /* %WMI_SCAN_EVENT_ */
3374 __le32 reason; /* %WMI_SCAN_REASON_ */
3375 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3376 __le32 scan_req_id;
3377 __le32 scan_id;
3378 __le32 vdev_id;
3379} __packed;
3380
3381/*
3382 * This defines how much headroom is kept in the
3383 * receive frame between the descriptor and the
3384 * payload, in order for the WMI PHY error and
3385 * management handler to insert header contents.
3386 *
3387 * This is in bytes.
3388 */
3389#define WMI_MGMT_RX_HDR_HEADROOM 52
3390
3391/*
3392 * This event will be used for sending scan results
3393 * as well as rx mgmt frames to the host. The rx buffer
3394 * will be sent as part of this WMI event. It would be a
3395 * good idea to pass all the fields in the RX status
3396 * descriptor up to the host.
3397 */
3398struct wmi_mgmt_rx_hdr_v1 {
3399 __le32 channel;
3400 __le32 snr;
3401 __le32 rate;
3402 __le32 phy_mode;
3403 __le32 buf_len;
3404 __le32 status; /* %WMI_RX_STATUS_ */
3405} __packed;
3406
3407struct wmi_mgmt_rx_hdr_v2 {
3408 struct wmi_mgmt_rx_hdr_v1 v1;
3409 __le32 rssi_ctl[4];
3410} __packed;
3411
3412struct wmi_mgmt_rx_event_v1 {
3413 struct wmi_mgmt_rx_hdr_v1 hdr;
3414 u8 buf[];
3415} __packed;
3416
3417struct wmi_mgmt_rx_event_v2 {
3418 struct wmi_mgmt_rx_hdr_v2 hdr;
3419 u8 buf[];
3420} __packed;
3421
3422struct wmi_10_4_mgmt_rx_hdr {
3423 __le32 channel;
3424 __le32 snr;
3425 u8 rssi_ctl[4];
3426 __le32 rate;
3427 __le32 phy_mode;
3428 __le32 buf_len;
3429 __le32 status;
3430} __packed;
3431
3432struct wmi_10_4_mgmt_rx_event {
3433 struct wmi_10_4_mgmt_rx_hdr hdr;
3434 u8 buf[];
3435} __packed;
3436
3437struct wmi_mgmt_rx_ext_info {
3438 __le64 rx_mac_timestamp;
3439} __packed __aligned(4);
3440
3441#define WMI_RX_STATUS_OK 0x00
3442#define WMI_RX_STATUS_ERR_CRC 0x01
3443#define WMI_RX_STATUS_ERR_DECRYPT 0x08
3444#define WMI_RX_STATUS_ERR_MIC 0x10
3445#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
3446/* Extension data at the end of mgmt frame */
3447#define WMI_RX_STATUS_EXT_INFO 0x40
3448
3449#define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26
3450#define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24
3451#define PHY_ERROR_GEN_RADAR 0x05
3452
3453#define PHY_ERROR_10_4_RADAR_MASK 0x4
3454#define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000
3455
3456enum phy_err_type {
3457 PHY_ERROR_UNKNOWN,
3458 PHY_ERROR_SPECTRAL_SCAN,
3459 PHY_ERROR_FALSE_RADAR_EXT,
3460 PHY_ERROR_RADAR
3461};
3462
3463struct wmi_phyerr {
3464 __le32 tsf_timestamp;
3465 __le16 freq1;
3466 __le16 freq2;
3467 u8 rssi_combined;
3468 u8 chan_width_mhz;
3469 u8 phy_err_code;
3470 u8 rsvd0;
3471 __le32 rssi_chains[4];
3472 __le16 nf_chains[4];
3473 __le32 buf_len;
3474 u8 buf[];
3475} __packed;
3476
3477struct wmi_phyerr_event {
3478 __le32 num_phyerrs;
3479 __le32 tsf_l32;
3480 __le32 tsf_u32;
3481
3482 /* array of struct wmi_phyerr */
3483 u8 phyerrs[];
3484} __packed;
3485
3486struct wmi_10_4_phyerr_event {
3487 __le32 tsf_l32;
3488 __le32 tsf_u32;
3489 __le16 freq1;
3490 __le16 freq2;
3491 u8 rssi_combined;
3492 u8 chan_width_mhz;
3493 u8 phy_err_code;
3494 u8 rsvd0;
3495 __le32 rssi_chains[4];
3496 __le16 nf_chains[4];
3497 __le32 phy_err_mask[2];
3498 __le32 tsf_timestamp;
3499 __le32 buf_len;
3500 u8 buf[];
3501} __packed;
3502
3503struct wmi_radar_found_info {
3504 __le32 pri_min;
3505 __le32 pri_max;
3506 __le32 width_min;
3507 __le32 width_max;
3508 __le32 sidx_min;
3509 __le32 sidx_max;
3510} __packed;
3511
3512enum wmi_radar_confirmation_status {
3513 /* Detected radar was due to SW pulses */
3514 WMI_SW_RADAR_DETECTED = 0,
3515
3516 WMI_RADAR_DETECTION_FAIL = 1,
3517
3518 /* Real radar detected */
3519 WMI_HW_RADAR_DETECTED = 2,
3520};
3521
3522#define PHYERR_TLV_SIG 0xBB
3523#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
3524#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
3525#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
3526
3527struct phyerr_radar_report {
3528 __le32 reg0; /* RADAR_REPORT_REG0_* */
3529 __le32 reg1; /* RADAR_REPORT_REG1_* */
3530} __packed;
3531
3532#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
3533#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
3534
3535#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
3536#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
3537
3538#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
3539#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
3540
3541#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
3542#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
3543
3544#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
3545#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
3546
3547#define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
3548#define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
3549
3550#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
3551#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
3552
3553#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
3554#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
3555
3556#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
3557#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
3558
3559#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
3560#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
3561
3562#define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
3563#define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
3564
3565struct phyerr_fft_report {
3566 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3567 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3568} __packed;
3569
3570#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
3571#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
3572
3573#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
3574#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
3575
3576#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
3577#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
3578
3579#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
3580#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
3581
3582#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
3583#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
3584
3585#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
3586#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
3587
3588#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
3589#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
3590
3591#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
3592#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
3593
3594struct phyerr_tlv {
3595 __le16 len;
3596 u8 tag;
3597 u8 sig;
3598} __packed;
3599
3600#define DFS_RSSI_POSSIBLY_FALSE 50
3601#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
3602
3603struct wmi_mgmt_tx_hdr {
3604 __le32 vdev_id;
3605 struct wmi_mac_addr peer_macaddr;
3606 __le32 tx_rate;
3607 __le32 tx_power;
3608 __le32 buf_len;
3609} __packed;
3610
3611struct wmi_mgmt_tx_cmd {
3612 struct wmi_mgmt_tx_hdr hdr;
3613 u8 buf[];
3614} __packed;
3615
3616struct wmi_echo_event {
3617 __le32 value;
3618} __packed;
3619
3620struct wmi_echo_cmd {
3621 __le32 value;
3622} __packed;
3623
3624struct wmi_pdev_set_regdomain_cmd {
3625 __le32 reg_domain;
3626 __le32 reg_domain_2G;
3627 __le32 reg_domain_5G;
3628 __le32 conformance_test_limit_2G;
3629 __le32 conformance_test_limit_5G;
3630} __packed;
3631
3632enum wmi_dfs_region {
3633 /* Uninitialized dfs domain */
3634 WMI_UNINIT_DFS_DOMAIN = 0,
3635
3636 /* FCC3 dfs domain */
3637 WMI_FCC_DFS_DOMAIN = 1,
3638
3639 /* ETSI dfs domain */
3640 WMI_ETSI_DFS_DOMAIN = 2,
3641
3642 /*Japan dfs domain */
3643 WMI_MKK4_DFS_DOMAIN = 3,
3644};
3645
3646struct wmi_pdev_set_regdomain_cmd_10x {
3647 __le32 reg_domain;
3648 __le32 reg_domain_2G;
3649 __le32 reg_domain_5G;
3650 __le32 conformance_test_limit_2G;
3651 __le32 conformance_test_limit_5G;
3652
3653 /* dfs domain from wmi_dfs_region */
3654 __le32 dfs_domain;
3655} __packed;
3656
3657/* Command to set/unset chip in quiet mode */
3658struct wmi_pdev_set_quiet_cmd {
3659 /* period in TUs */
3660 __le32 period;
3661
3662 /* duration in TUs */
3663 __le32 duration;
3664
3665 /* offset in TUs */
3666 __le32 next_start;
3667
3668 /* enable/disable */
3669 __le32 enabled;
3670} __packed;
3671
3672/*
3673 * 802.11g protection mode.
3674 */
3675enum ath10k_protmode {
3676 ATH10K_PROT_NONE = 0, /* no protection */
3677 ATH10K_PROT_CTSONLY = 1, /* CTS to self */
3678 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */
3679};
3680
3681enum wmi_rtscts_profile {
3682 WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3683 WMI_RTSCTS_FOR_SECOND_RATESERIES,
3684 WMI_RTSCTS_ACROSS_SW_RETRIES
3685};
3686
3687#define WMI_RTSCTS_ENABLED 1
3688#define WMI_RTSCTS_SET_MASK 0x0f
3689#define WMI_RTSCTS_SET_LSB 0
3690
3691#define WMI_RTSCTS_PROFILE_MASK 0xf0
3692#define WMI_RTSCTS_PROFILE_LSB 4
3693
3694enum wmi_beacon_gen_mode {
3695 WMI_BEACON_STAGGERED_MODE = 0,
3696 WMI_BEACON_BURST_MODE = 1
3697};
3698
3699enum wmi_csa_event_ies_present_flag {
3700 WMI_CSA_IE_PRESENT = 0x00000001,
3701 WMI_XCSA_IE_PRESENT = 0x00000002,
3702 WMI_WBW_IE_PRESENT = 0x00000004,
3703 WMI_CSWARP_IE_PRESENT = 0x00000008,
3704};
3705
3706/* wmi CSA receive event from beacon frame */
3707struct wmi_csa_event {
3708 __le32 i_fc_dur;
3709 /* Bit 0-15: FC */
3710 /* Bit 16-31: DUR */
3711 struct wmi_mac_addr i_addr1;
3712 struct wmi_mac_addr i_addr2;
3713 __le32 csa_ie[2];
3714 __le32 xcsa_ie[2];
3715 __le32 wb_ie[2];
3716 __le32 cswarp_ie;
3717 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3718} __packed;
3719
3720/* the definition of different PDEV parameters */
3721#define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3722#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3723#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
3724
3725struct wmi_pdev_param_map {
3726 u32 tx_chain_mask;
3727 u32 rx_chain_mask;
3728 u32 txpower_limit2g;
3729 u32 txpower_limit5g;
3730 u32 txpower_scale;
3731 u32 beacon_gen_mode;
3732 u32 beacon_tx_mode;
3733 u32 resmgr_offchan_mode;
3734 u32 protection_mode;
3735 u32 dynamic_bw;
3736 u32 non_agg_sw_retry_th;
3737 u32 agg_sw_retry_th;
3738 u32 sta_kickout_th;
3739 u32 ac_aggrsize_scaling;
3740 u32 ltr_enable;
3741 u32 ltr_ac_latency_be;
3742 u32 ltr_ac_latency_bk;
3743 u32 ltr_ac_latency_vi;
3744 u32 ltr_ac_latency_vo;
3745 u32 ltr_ac_latency_timeout;
3746 u32 ltr_sleep_override;
3747 u32 ltr_rx_override;
3748 u32 ltr_tx_activity_timeout;
3749 u32 l1ss_enable;
3750 u32 dsleep_enable;
3751 u32 pcielp_txbuf_flush;
3752 u32 pcielp_txbuf_watermark;
3753 u32 pcielp_txbuf_tmo_en;
3754 u32 pcielp_txbuf_tmo_value;
3755 u32 pdev_stats_update_period;
3756 u32 vdev_stats_update_period;
3757 u32 peer_stats_update_period;
3758 u32 bcnflt_stats_update_period;
3759 u32 pmf_qos;
3760 u32 arp_ac_override;
3761 u32 dcs;
3762 u32 ani_enable;
3763 u32 ani_poll_period;
3764 u32 ani_listen_period;
3765 u32 ani_ofdm_level;
3766 u32 ani_cck_level;
3767 u32 dyntxchain;
3768 u32 proxy_sta;
3769 u32 idle_ps_config;
3770 u32 power_gating_sleep;
3771 u32 fast_channel_reset;
3772 u32 burst_dur;
3773 u32 burst_enable;
3774 u32 cal_period;
3775 u32 aggr_burst;
3776 u32 rx_decap_mode;
3777 u32 smart_antenna_default_antenna;
3778 u32 igmpmld_override;
3779 u32 igmpmld_tid;
3780 u32 antenna_gain;
3781 u32 rx_filter;
3782 u32 set_mcast_to_ucast_tid;
3783 u32 proxy_sta_mode;
3784 u32 set_mcast2ucast_mode;
3785 u32 set_mcast2ucast_buffer;
3786 u32 remove_mcast2ucast_buffer;
3787 u32 peer_sta_ps_statechg_enable;
3788 u32 igmpmld_ac_override;
3789 u32 block_interbss;
3790 u32 set_disable_reset_cmdid;
3791 u32 set_msdu_ttl_cmdid;
3792 u32 set_ppdu_duration_cmdid;
3793 u32 txbf_sound_period_cmdid;
3794 u32 set_promisc_mode_cmdid;
3795 u32 set_burst_mode_cmdid;
3796 u32 en_stats;
3797 u32 mu_group_policy;
3798 u32 noise_detection;
3799 u32 noise_threshold;
3800 u32 dpd_enable;
3801 u32 set_mcast_bcast_echo;
3802 u32 atf_strict_sch;
3803 u32 atf_sched_duration;
3804 u32 ant_plzn;
3805 u32 mgmt_retry_limit;
3806 u32 sensitivity_level;
3807 u32 signed_txpower_2g;
3808 u32 signed_txpower_5g;
3809 u32 enable_per_tid_amsdu;
3810 u32 enable_per_tid_ampdu;
3811 u32 cca_threshold;
3812 u32 rts_fixed_rate;
3813 u32 pdev_reset;
3814 u32 wapi_mbssid_offset;
3815 u32 arp_srcaddr;
3816 u32 arp_dstaddr;
3817 u32 enable_btcoex;
3818 u32 rfkill_config;
3819 u32 rfkill_enable;
3820 u32 peer_stats_info_enable;
3821};
3822
3823#define WMI_PDEV_PARAM_UNSUPPORTED 0
3824
3825enum wmi_pdev_param {
3826 /* TX chain mask */
3827 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3828 /* RX chain mask */
3829 WMI_PDEV_PARAM_RX_CHAIN_MASK,
3830 /* TX power limit for 2G Radio */
3831 WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3832 /* TX power limit for 5G Radio */
3833 WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3834 /* TX power scale */
3835 WMI_PDEV_PARAM_TXPOWER_SCALE,
3836 /* Beacon generation mode . 0: host, 1: target */
3837 WMI_PDEV_PARAM_BEACON_GEN_MODE,
3838 /* Beacon generation mode . 0: staggered 1: bursted */
3839 WMI_PDEV_PARAM_BEACON_TX_MODE,
3840 /*
3841 * Resource manager off chan mode .
3842 * 0: turn off offchan mode. 1: turn on offchan mode
3843 */
3844 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3845 /*
3846 * Protection mode:
3847 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3848 */
3849 WMI_PDEV_PARAM_PROTECTION_MODE,
3850 /*
3851 * Dynamic bandwidth - 0: disable, 1: enable
3852 *
3853 * When enabled HW rate control tries different bandwidths when
3854 * retransmitting frames.
3855 */
3856 WMI_PDEV_PARAM_DYNAMIC_BW,
3857 /* Non aggregrate/ 11g sw retry threshold.0-disable */
3858 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3859 /* aggregrate sw retry threshold. 0-disable*/
3860 WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3861 /* Station kickout threshold (non of consecutive failures).0-disable */
3862 WMI_PDEV_PARAM_STA_KICKOUT_TH,
3863 /* Aggerate size scaling configuration per AC */
3864 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3865 /* LTR enable */
3866 WMI_PDEV_PARAM_LTR_ENABLE,
3867 /* LTR latency for BE, in us */
3868 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3869 /* LTR latency for BK, in us */
3870 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3871 /* LTR latency for VI, in us */
3872 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3873 /* LTR latency for VO, in us */
3874 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3875 /* LTR AC latency timeout, in ms */
3876 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3877 /* LTR platform latency override, in us */
3878 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3879 /* LTR-RX override, in us */
3880 WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3881 /* Tx activity timeout for LTR, in us */
3882 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3883 /* L1SS state machine enable */
3884 WMI_PDEV_PARAM_L1SS_ENABLE,
3885 /* Deep sleep state machine enable */
3886 WMI_PDEV_PARAM_DSLEEP_ENABLE,
3887 /* RX buffering flush enable */
3888 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3889 /* RX buffering matermark */
3890 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3891 /* RX buffering timeout enable */
3892 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3893 /* RX buffering timeout value */
3894 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3895 /* pdev level stats update period in ms */
3896 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3897 /* vdev level stats update period in ms */
3898 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3899 /* peer level stats update period in ms */
3900 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3901 /* beacon filter status update period */
3902 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3903 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3904 WMI_PDEV_PARAM_PMF_QOS,
3905 /* Access category on which ARP frames are sent */
3906 WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3907 /* DCS configuration */
3908 WMI_PDEV_PARAM_DCS,
3909 /* Enable/Disable ANI on target */
3910 WMI_PDEV_PARAM_ANI_ENABLE,
3911 /* configure the ANI polling period */
3912 WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3913 /* configure the ANI listening period */
3914 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3915 /* configure OFDM immunity level */
3916 WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3917 /* configure CCK immunity level */
3918 WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3919 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3920 WMI_PDEV_PARAM_DYNTXCHAIN,
3921 /* Enable/Disable proxy STA */
3922 WMI_PDEV_PARAM_PROXY_STA,
3923 /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3924 WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3925 /* Enable/Disable power gating sleep */
3926 WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3927};
3928
3929enum wmi_10x_pdev_param {
3930 /* TX chian mask */
3931 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3932 /* RX chian mask */
3933 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3934 /* TX power limit for 2G Radio */
3935 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3936 /* TX power limit for 5G Radio */
3937 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3938 /* TX power scale */
3939 WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3940 /* Beacon generation mode . 0: host, 1: target */
3941 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3942 /* Beacon generation mode . 0: staggered 1: bursted */
3943 WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3944 /*
3945 * Resource manager off chan mode .
3946 * 0: turn off offchan mode. 1: turn on offchan mode
3947 */
3948 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3949 /*
3950 * Protection mode:
3951 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3952 */
3953 WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3954 /* Dynamic bandwidth 0: disable 1: enable */
3955 WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3956 /* Non aggregrate/ 11g sw retry threshold.0-disable */
3957 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3958 /* aggregrate sw retry threshold. 0-disable*/
3959 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3960 /* Station kickout threshold (non of consecutive failures).0-disable */
3961 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3962 /* Aggerate size scaling configuration per AC */
3963 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3964 /* LTR enable */
3965 WMI_10X_PDEV_PARAM_LTR_ENABLE,
3966 /* LTR latency for BE, in us */
3967 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3968 /* LTR latency for BK, in us */
3969 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3970 /* LTR latency for VI, in us */
3971 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3972 /* LTR latency for VO, in us */
3973 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3974 /* LTR AC latency timeout, in ms */
3975 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3976 /* LTR platform latency override, in us */
3977 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3978 /* LTR-RX override, in us */
3979 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3980 /* Tx activity timeout for LTR, in us */
3981 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3982 /* L1SS state machine enable */
3983 WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3984 /* Deep sleep state machine enable */
3985 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3986 /* pdev level stats update period in ms */
3987 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3988 /* vdev level stats update period in ms */
3989 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3990 /* peer level stats update period in ms */
3991 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3992 /* beacon filter status update period */
3993 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3994 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3995 WMI_10X_PDEV_PARAM_PMF_QOS,
3996 /* Access category on which ARP and DHCP frames are sent */
3997 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3998 /* DCS configuration */
3999 WMI_10X_PDEV_PARAM_DCS,
4000 /* Enable/Disable ANI on target */
4001 WMI_10X_PDEV_PARAM_ANI_ENABLE,
4002 /* configure the ANI polling period */
4003 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
4004 /* configure the ANI listening period */
4005 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4006 /* configure OFDM immunity level */
4007 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4008 /* configure CCK immunity level */
4009 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4010 /* Enable/Disable CDD for 1x1 STAs in rate control module */
4011 WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4012 /* Enable/Disable Fast channel reset*/
4013 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4014 /* Set Bursting DUR */
4015 WMI_10X_PDEV_PARAM_BURST_DUR,
4016 /* Set Bursting Enable*/
4017 WMI_10X_PDEV_PARAM_BURST_ENABLE,
4018
4019 /* following are available as of firmware 10.2 */
4020 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4021 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4022 WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4023 WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4024 WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4025 WMI_10X_PDEV_PARAM_RX_FILTER,
4026 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4027 WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4028 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4029 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4030 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4031 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4032 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4033 WMI_10X_PDEV_PARAM_CAL_PERIOD,
4034 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4035 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4036 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4037 WMI_10X_PDEV_PARAM_PDEV_RESET
4038};
4039
4040enum wmi_10_4_pdev_param {
4041 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4042 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4043 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4044 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4045 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4046 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4047 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4048 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4049 WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4050 WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4051 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4052 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4053 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4054 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4055 WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4056 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4057 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4058 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4059 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4060 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4061 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4062 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4063 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4064 WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4065 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4066 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4067 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4068 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4069 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4070 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4071 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4072 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4073 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4074 WMI_10_4_PDEV_PARAM_PMF_QOS,
4075 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4076 WMI_10_4_PDEV_PARAM_DCS,
4077 WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4078 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4079 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4080 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4081 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4082 WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4083 WMI_10_4_PDEV_PARAM_PROXY_STA,
4084 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4085 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4086 WMI_10_4_PDEV_PARAM_AGGR_BURST,
4087 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4088 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4089 WMI_10_4_PDEV_PARAM_BURST_DUR,
4090 WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4091 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4092 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4093 WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4094 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4095 WMI_10_4_PDEV_PARAM_RX_FILTER,
4096 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4097 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4098 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4099 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4100 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4101 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4102 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4103 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4104 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4105 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4106 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4107 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4108 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4109 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4110 WMI_10_4_PDEV_PARAM_EN_STATS,
4111 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4112 WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4113 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4114 WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4115 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4116 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4117 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4118 WMI_10_4_PDEV_PARAM_ANT_PLZN,
4119 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4120 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4121 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4122 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4123 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4124 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4125 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4126 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4127 WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4128 WMI_10_4_PDEV_PARAM_PDEV_RESET,
4129 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4130 WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4131 WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4132 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4133 WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4134 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4135 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4136 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4137 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4138 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4139 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4140 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4141};
4142
4143struct wmi_pdev_set_param_cmd {
4144 __le32 param_id;
4145 __le32 param_value;
4146} __packed;
4147
4148struct wmi_pdev_set_base_macaddr_cmd {
4149 struct wmi_mac_addr mac_addr;
4150} __packed;
4151
4152/* valid period is 1 ~ 60000ms, unit in millisecond */
4153#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4154
4155struct wmi_pdev_get_tpc_config_cmd {
4156 /* parameter */
4157 __le32 param;
4158} __packed;
4159
4160#define WMI_TPC_CONFIG_PARAM 1
4161#define WMI_TPC_FINAL_RATE_MAX 240
4162#define WMI_TPC_TX_N_CHAIN 4
4163#define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65)
4164#define WMI_TPC_PREAM_TABLE_MAX 10
4165#define WMI_TPC_FLAG 3
4166#define WMI_TPC_BUF_SIZE 10
4167#define WMI_TPC_BEAMFORMING 2
4168
4169enum wmi_tpc_table_type {
4170 WMI_TPC_TABLE_TYPE_CDD = 0,
4171 WMI_TPC_TABLE_TYPE_STBC = 1,
4172 WMI_TPC_TABLE_TYPE_TXBF = 2,
4173};
4174
4175enum wmi_tpc_config_event_flag {
4176 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
4177 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
4178 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
4179};
4180
4181struct wmi_pdev_tpc_config_event {
4182 __le32 reg_domain;
4183 __le32 chan_freq;
4184 __le32 phy_mode;
4185 __le32 twice_antenna_reduction;
4186 __le32 twice_max_rd_power;
4187 a_sle32 twice_antenna_gain;
4188 __le32 power_limit;
4189 __le32 rate_max;
4190 __le32 num_tx_chain;
4191 __le32 ctl;
4192 __le32 flags;
4193 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4194 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4195 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4196 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4197 u8 rates_array[WMI_TPC_RATE_MAX];
4198} __packed;
4199
4200/* Transmit power scale factor. */
4201enum wmi_tp_scale {
4202 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */
4203 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
4204 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
4205 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
4206 WMI_TP_SCALE_MIN = 4, /* min, but still on */
4207 WMI_TP_SCALE_SIZE = 5, /* max num of enum */
4208};
4209
4210struct wmi_pdev_tpc_final_table_event {
4211 __le32 reg_domain;
4212 __le32 chan_freq;
4213 __le32 phy_mode;
4214 __le32 twice_antenna_reduction;
4215 __le32 twice_max_rd_power;
4216 a_sle32 twice_antenna_gain;
4217 __le32 power_limit;
4218 __le32 rate_max;
4219 __le32 num_tx_chain;
4220 __le32 ctl;
4221 __le32 flags;
4222 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4223 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4224 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4225 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4226 u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4227 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4228 [WMI_TPC_TX_N_CHAIN];
4229} __packed;
4230
4231struct wmi_pdev_get_tpc_table_cmd {
4232 __le32 param;
4233} __packed;
4234
4235enum wmi_tpc_pream_2ghz {
4236 WMI_TPC_PREAM_2GHZ_CCK = 0,
4237 WMI_TPC_PREAM_2GHZ_OFDM,
4238 WMI_TPC_PREAM_2GHZ_HT20,
4239 WMI_TPC_PREAM_2GHZ_HT40,
4240 WMI_TPC_PREAM_2GHZ_VHT20,
4241 WMI_TPC_PREAM_2GHZ_VHT40,
4242 WMI_TPC_PREAM_2GHZ_VHT80,
4243};
4244
4245enum wmi_tpc_pream_5ghz {
4246 WMI_TPC_PREAM_5GHZ_OFDM = 1,
4247 WMI_TPC_PREAM_5GHZ_HT20,
4248 WMI_TPC_PREAM_5GHZ_HT40,
4249 WMI_TPC_PREAM_5GHZ_VHT20,
4250 WMI_TPC_PREAM_5GHZ_VHT40,
4251 WMI_TPC_PREAM_5GHZ_VHT80,
4252 WMI_TPC_PREAM_5GHZ_HTCUP,
4253};
4254
4255#define WMI_PEER_PS_STATE_DISABLED 2
4256
4257struct wmi_peer_sta_ps_state_chg_event {
4258 struct wmi_mac_addr peer_macaddr;
4259 __le32 peer_ps_state;
4260} __packed;
4261
4262struct wmi_pdev_chanlist_update_event {
4263 /* number of channels */
4264 __le32 num_chan;
4265 /* array of channels */
4266 struct wmi_channel channel_list[1];
4267} __packed;
4268
4269#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4270
4271struct wmi_debug_mesg_event {
4272 /* message buffer, NULL terminated */
4273 char bufp[WMI_MAX_DEBUG_MESG];
4274} __packed;
4275
4276enum {
4277 /* P2P device */
4278 VDEV_SUBTYPE_P2PDEV = 0,
4279 /* P2P client */
4280 VDEV_SUBTYPE_P2PCLI,
4281 /* P2P GO */
4282 VDEV_SUBTYPE_P2PGO,
4283 /* BT3.0 HS */
4284 VDEV_SUBTYPE_BT,
4285};
4286
4287struct wmi_pdev_set_channel_cmd {
4288 /* idnore power , only use flags , mode and freq */
4289 struct wmi_channel chan;
4290} __packed;
4291
4292struct wmi_pdev_pktlog_enable_cmd {
4293 __le32 ev_bitmap;
4294} __packed;
4295
4296/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4297#define WMI_DSCP_MAP_MAX (64)
4298struct wmi_pdev_set_dscp_tid_map_cmd {
4299 /* map indicating DSCP to TID conversion */
4300 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4301} __packed;
4302
4303enum mcast_bcast_rate_id {
4304 WMI_SET_MCAST_RATE,
4305 WMI_SET_BCAST_RATE
4306};
4307
4308struct mcast_bcast_rate {
4309 enum mcast_bcast_rate_id rate_id;
4310 __le32 rate;
4311} __packed;
4312
4313struct wmi_wmm_params {
4314 __le32 cwmin;
4315 __le32 cwmax;
4316 __le32 aifs;
4317 __le32 txop;
4318 __le32 acm;
4319 __le32 no_ack;
4320} __packed;
4321
4322struct wmi_pdev_set_wmm_params {
4323 struct wmi_wmm_params ac_be;
4324 struct wmi_wmm_params ac_bk;
4325 struct wmi_wmm_params ac_vi;
4326 struct wmi_wmm_params ac_vo;
4327} __packed;
4328
4329struct wmi_wmm_params_arg {
4330 u32 cwmin;
4331 u32 cwmax;
4332 u32 aifs;
4333 u32 txop;
4334 u32 acm;
4335 u32 no_ack;
4336};
4337
4338struct wmi_wmm_params_all_arg {
4339 struct wmi_wmm_params_arg ac_be;
4340 struct wmi_wmm_params_arg ac_bk;
4341 struct wmi_wmm_params_arg ac_vi;
4342 struct wmi_wmm_params_arg ac_vo;
4343};
4344
4345struct wmi_pdev_stats_tx {
4346 /* Num HTT cookies queued to dispatch list */
4347 __le32 comp_queued;
4348
4349 /* Num HTT cookies dispatched */
4350 __le32 comp_delivered;
4351
4352 /* Num MSDU queued to WAL */
4353 __le32 msdu_enqued;
4354
4355 /* Num MPDU queue to WAL */
4356 __le32 mpdu_enqued;
4357
4358 /* Num MSDUs dropped by WMM limit */
4359 __le32 wmm_drop;
4360
4361 /* Num Local frames queued */
4362 __le32 local_enqued;
4363
4364 /* Num Local frames done */
4365 __le32 local_freed;
4366
4367 /* Num queued to HW */
4368 __le32 hw_queued;
4369
4370 /* Num PPDU reaped from HW */
4371 __le32 hw_reaped;
4372
4373 /* Num underruns */
4374 __le32 underrun;
4375
4376 /* Num PPDUs cleaned up in TX abort */
4377 __le32 tx_abort;
4378
4379 /* Num MPDUs requeued by SW */
4380 __le32 mpdus_requeued;
4381
4382 /* excessive retries */
4383 __le32 tx_ko;
4384
4385 /* data hw rate code */
4386 __le32 data_rc;
4387
4388 /* Scheduler self triggers */
4389 __le32 self_triggers;
4390
4391 /* frames dropped due to excessive sw retries */
4392 __le32 sw_retry_failure;
4393
4394 /* illegal rate phy errors */
4395 __le32 illgl_rate_phy_err;
4396
4397 /* wal pdev continuous xretry */
4398 __le32 pdev_cont_xretry;
4399
4400 /* wal pdev continuous xretry */
4401 __le32 pdev_tx_timeout;
4402
4403 /* wal pdev resets */
4404 __le32 pdev_resets;
4405
4406 /* frames dropped due to non-availability of stateless TIDs */
4407 __le32 stateless_tid_alloc_failure;
4408
4409 __le32 phy_underrun;
4410
4411 /* MPDU is more than txop limit */
4412 __le32 txop_ovf;
4413} __packed;
4414
4415struct wmi_10_4_pdev_stats_tx {
4416 /* Num HTT cookies queued to dispatch list */
4417 __le32 comp_queued;
4418
4419 /* Num HTT cookies dispatched */
4420 __le32 comp_delivered;
4421
4422 /* Num MSDU queued to WAL */
4423 __le32 msdu_enqued;
4424
4425 /* Num MPDU queue to WAL */
4426 __le32 mpdu_enqued;
4427
4428 /* Num MSDUs dropped by WMM limit */
4429 __le32 wmm_drop;
4430
4431 /* Num Local frames queued */
4432 __le32 local_enqued;
4433
4434 /* Num Local frames done */
4435 __le32 local_freed;
4436
4437 /* Num queued to HW */
4438 __le32 hw_queued;
4439
4440 /* Num PPDU reaped from HW */
4441 __le32 hw_reaped;
4442
4443 /* Num underruns */
4444 __le32 underrun;
4445
4446 /* HW Paused. */
4447 __le32 hw_paused;
4448
4449 /* Num PPDUs cleaned up in TX abort */
4450 __le32 tx_abort;
4451
4452 /* Num MPDUs requeued by SW */
4453 __le32 mpdus_requeued;
4454
4455 /* excessive retries */
4456 __le32 tx_ko;
4457
4458 /* data hw rate code */
4459 __le32 data_rc;
4460
4461 /* Scheduler self triggers */
4462 __le32 self_triggers;
4463
4464 /* frames dropped due to excessive sw retries */
4465 __le32 sw_retry_failure;
4466
4467 /* illegal rate phy errors */
4468 __le32 illgl_rate_phy_err;
4469
4470 /* wal pdev continuous xretry */
4471 __le32 pdev_cont_xretry;
4472
4473 /* wal pdev tx timeouts */
4474 __le32 pdev_tx_timeout;
4475
4476 /* wal pdev resets */
4477 __le32 pdev_resets;
4478
4479 /* frames dropped due to non-availability of stateless TIDs */
4480 __le32 stateless_tid_alloc_failure;
4481
4482 __le32 phy_underrun;
4483
4484 /* MPDU is more than txop limit */
4485 __le32 txop_ovf;
4486
4487 /* Number of Sequences posted */
4488 __le32 seq_posted;
4489
4490 /* Number of Sequences failed queueing */
4491 __le32 seq_failed_queueing;
4492
4493 /* Number of Sequences completed */
4494 __le32 seq_completed;
4495
4496 /* Number of Sequences restarted */
4497 __le32 seq_restarted;
4498
4499 /* Number of MU Sequences posted */
4500 __le32 mu_seq_posted;
4501
4502 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4503 __le32 mpdus_sw_flush;
4504
4505 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4506 __le32 mpdus_hw_filter;
4507
4508 /* Num MPDUs truncated by PDG
4509 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4510 */
4511 __le32 mpdus_truncated;
4512
4513 /* Num MPDUs that was tried but didn't receive ACK or BA */
4514 __le32 mpdus_ack_failed;
4515
4516 /* Num MPDUs that was dropped due to expiry. */
4517 __le32 mpdus_expired;
4518} __packed;
4519
4520struct wmi_pdev_stats_rx {
4521 /* Cnts any change in ring routing mid-ppdu */
4522 __le32 mid_ppdu_route_change;
4523
4524 /* Total number of statuses processed */
4525 __le32 status_rcvd;
4526
4527 /* Extra frags on rings 0-3 */
4528 __le32 r0_frags;
4529 __le32 r1_frags;
4530 __le32 r2_frags;
4531 __le32 r3_frags;
4532
4533 /* MSDUs / MPDUs delivered to HTT */
4534 __le32 htt_msdus;
4535 __le32 htt_mpdus;
4536
4537 /* MSDUs / MPDUs delivered to local stack */
4538 __le32 loc_msdus;
4539 __le32 loc_mpdus;
4540
4541 /* AMSDUs that have more MSDUs than the status ring size */
4542 __le32 oversize_amsdu;
4543
4544 /* Number of PHY errors */
4545 __le32 phy_errs;
4546
4547 /* Number of PHY errors drops */
4548 __le32 phy_err_drop;
4549
4550 /* Number of mpdu errors - FCS, MIC, ENC etc. */
4551 __le32 mpdu_errs;
4552} __packed;
4553
4554struct wmi_pdev_stats_peer {
4555 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4556 __le32 dummy;
4557} __packed;
4558
4559enum wmi_stats_id {
4560 WMI_STAT_PEER = BIT(0),
4561 WMI_STAT_AP = BIT(1),
4562 WMI_STAT_PDEV = BIT(2),
4563 WMI_STAT_VDEV = BIT(3),
4564 WMI_STAT_BCNFLT = BIT(4),
4565 WMI_STAT_VDEV_RATE = BIT(5),
4566};
4567
4568enum wmi_10_4_stats_id {
4569 WMI_10_4_STAT_PEER = BIT(0),
4570 WMI_10_4_STAT_AP = BIT(1),
4571 WMI_10_4_STAT_INST = BIT(2),
4572 WMI_10_4_STAT_PEER_EXTD = BIT(3),
4573 WMI_10_4_STAT_VDEV_EXTD = BIT(4),
4574};
4575
4576enum wmi_tlv_stats_id {
4577 WMI_TLV_STAT_PEER = BIT(0),
4578 WMI_TLV_STAT_AP = BIT(1),
4579 WMI_TLV_STAT_PDEV = BIT(2),
4580 WMI_TLV_STAT_VDEV = BIT(3),
4581 WMI_TLV_STAT_PEER_EXTD = BIT(10),
4582};
4583
4584struct wlan_inst_rssi_args {
4585 __le16 cfg_retry_count;
4586 __le16 retry_count;
4587};
4588
4589struct wmi_request_stats_cmd {
4590 __le32 stats_id;
4591
4592 __le32 vdev_id;
4593
4594 /* peer MAC address */
4595 struct wmi_mac_addr peer_macaddr;
4596
4597 /* Instantaneous RSSI arguments */
4598 struct wlan_inst_rssi_args inst_rssi_args;
4599} __packed;
4600
4601enum wmi_peer_stats_info_request_type {
4602 /* request stats of one specified peer */
4603 WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4604 /* request stats of all peers belong to specified VDEV */
4605 WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4606};
4607
4608/* Suspend option */
4609enum {
4610 /* suspend */
4611 WMI_PDEV_SUSPEND,
4612
4613 /* suspend and disable all interrupts */
4614 WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4615};
4616
4617struct wmi_pdev_suspend_cmd {
4618 /* suspend option sent to target */
4619 __le32 suspend_opt;
4620} __packed;
4621
4622struct wmi_stats_event {
4623 __le32 stats_id; /* WMI_STAT_ */
4624 /*
4625 * number of pdev stats event structures
4626 * (wmi_pdev_stats) 0 or 1
4627 */
4628 __le32 num_pdev_stats;
4629 /*
4630 * number of vdev stats event structures
4631 * (wmi_vdev_stats) 0 or max vdevs
4632 */
4633 __le32 num_vdev_stats;
4634 /*
4635 * number of peer stats event structures
4636 * (wmi_peer_stats) 0 or max peers
4637 */
4638 __le32 num_peer_stats;
4639 __le32 num_bcnflt_stats;
4640 /*
4641 * followed by
4642 * num_pdev_stats * size of(struct wmi_pdev_stats)
4643 * num_vdev_stats * size of(struct wmi_vdev_stats)
4644 * num_peer_stats * size of(struct wmi_peer_stats)
4645 *
4646 * By having a zero sized array, the pointer to data area
4647 * becomes available without increasing the struct size
4648 */
4649 u8 data[];
4650} __packed;
4651
4652struct wmi_10_2_stats_event {
4653 __le32 stats_id; /* %WMI_REQUEST_ */
4654 __le32 num_pdev_stats;
4655 __le32 num_pdev_ext_stats;
4656 __le32 num_vdev_stats;
4657 __le32 num_peer_stats;
4658 __le32 num_bcnflt_stats;
4659 u8 data[];
4660} __packed;
4661
4662/*
4663 * PDEV statistics
4664 * TODO: add all PDEV stats here
4665 */
4666struct wmi_pdev_stats_base {
4667 __le32 chan_nf;
4668 __le32 tx_frame_count; /* Cycles spent transmitting frames */
4669 __le32 rx_frame_count; /* Cycles spent receiving frames */
4670 __le32 rx_clear_count; /* Total channel busy time, evidently */
4671 __le32 cycle_count; /* Total on-channel time */
4672 __le32 phy_err_count;
4673 __le32 chan_tx_pwr;
4674} __packed;
4675
4676struct wmi_pdev_stats {
4677 struct wmi_pdev_stats_base base;
4678 struct wmi_pdev_stats_tx tx;
4679 struct wmi_pdev_stats_rx rx;
4680 struct wmi_pdev_stats_peer peer;
4681} __packed;
4682
4683struct wmi_pdev_stats_extra {
4684 __le32 ack_rx_bad;
4685 __le32 rts_bad;
4686 __le32 rts_good;
4687 __le32 fcs_bad;
4688 __le32 no_beacons;
4689 __le32 mib_int_count;
4690} __packed;
4691
4692struct wmi_10x_pdev_stats {
4693 struct wmi_pdev_stats_base base;
4694 struct wmi_pdev_stats_tx tx;
4695 struct wmi_pdev_stats_rx rx;
4696 struct wmi_pdev_stats_peer peer;
4697 struct wmi_pdev_stats_extra extra;
4698} __packed;
4699
4700struct wmi_pdev_stats_mem {
4701 __le32 dram_free;
4702 __le32 iram_free;
4703} __packed;
4704
4705struct wmi_10_2_pdev_stats {
4706 struct wmi_pdev_stats_base base;
4707 struct wmi_pdev_stats_tx tx;
4708 __le32 mc_drop;
4709 struct wmi_pdev_stats_rx rx;
4710 __le32 pdev_rx_timeout;
4711 struct wmi_pdev_stats_mem mem;
4712 struct wmi_pdev_stats_peer peer;
4713 struct wmi_pdev_stats_extra extra;
4714} __packed;
4715
4716struct wmi_10_4_pdev_stats {
4717 struct wmi_pdev_stats_base base;
4718 struct wmi_10_4_pdev_stats_tx tx;
4719 struct wmi_pdev_stats_rx rx;
4720 __le32 rx_ovfl_errs;
4721 struct wmi_pdev_stats_mem mem;
4722 __le32 sram_free_size;
4723 struct wmi_pdev_stats_extra extra;
4724} __packed;
4725
4726/*
4727 * VDEV statistics
4728 */
4729
4730#define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31)
4731#define WMI_VDEV_STATS_FTM_COUNT_LSB 0
4732#define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff
4733
4734struct wmi_vdev_stats {
4735 __le32 vdev_id;
4736} __packed;
4737
4738struct wmi_vdev_stats_extd {
4739 __le32 vdev_id;
4740 __le32 ppdu_aggr_cnt;
4741 __le32 ppdu_noack;
4742 __le32 mpdu_queued;
4743 __le32 ppdu_nonaggr_cnt;
4744 __le32 mpdu_sw_requeued;
4745 __le32 mpdu_suc_retry;
4746 __le32 mpdu_suc_multitry;
4747 __le32 mpdu_fail_retry;
4748 __le32 tx_ftm_suc;
4749 __le32 tx_ftm_suc_retry;
4750 __le32 tx_ftm_fail;
4751 __le32 rx_ftmr_cnt;
4752 __le32 rx_ftmr_dup_cnt;
4753 __le32 rx_iftmr_cnt;
4754 __le32 rx_iftmr_dup_cnt;
4755 __le32 reserved[6];
4756} __packed;
4757
4758/*
4759 * peer statistics.
4760 * TODO: add more stats
4761 */
4762struct wmi_peer_stats {
4763 struct wmi_mac_addr peer_macaddr;
4764 __le32 peer_rssi;
4765 __le32 peer_tx_rate;
4766} __packed;
4767
4768struct wmi_10x_peer_stats {
4769 struct wmi_peer_stats old;
4770 __le32 peer_rx_rate;
4771} __packed;
4772
4773struct wmi_10_2_peer_stats {
4774 struct wmi_peer_stats old;
4775 __le32 peer_rx_rate;
4776 __le32 current_per;
4777 __le32 retries;
4778 __le32 tx_rate_count;
4779 __le32 max_4ms_frame_len;
4780 __le32 total_sub_frames;
4781 __le32 tx_bytes;
4782 __le32 num_pkt_loss_overflow[4];
4783 __le32 num_pkt_loss_excess_retry[4];
4784} __packed;
4785
4786struct wmi_10_2_4_peer_stats {
4787 struct wmi_10_2_peer_stats common;
4788 __le32 peer_rssi_changed;
4789} __packed;
4790
4791struct wmi_10_2_4_ext_peer_stats {
4792 struct wmi_10_2_peer_stats common;
4793 __le32 peer_rssi_changed;
4794 __le32 rx_duration;
4795} __packed;
4796
4797struct wmi_10_4_peer_stats {
4798 struct wmi_mac_addr peer_macaddr;
4799 __le32 peer_rssi;
4800 __le32 peer_rssi_seq_num;
4801 __le32 peer_tx_rate;
4802 __le32 peer_rx_rate;
4803 __le32 current_per;
4804 __le32 retries;
4805 __le32 tx_rate_count;
4806 __le32 max_4ms_frame_len;
4807 __le32 total_sub_frames;
4808 __le32 tx_bytes;
4809 __le32 num_pkt_loss_overflow[4];
4810 __le32 num_pkt_loss_excess_retry[4];
4811 __le32 peer_rssi_changed;
4812} __packed;
4813
4814struct wmi_10_4_peer_extd_stats {
4815 struct wmi_mac_addr peer_macaddr;
4816 __le32 inactive_time;
4817 __le32 peer_chain_rssi;
4818 __le32 rx_duration;
4819 __le32 reserved[10];
4820} __packed;
4821
4822struct wmi_10_4_bss_bcn_stats {
4823 __le32 vdev_id;
4824 __le32 bss_bcns_dropped;
4825 __le32 bss_bcn_delivered;
4826} __packed;
4827
4828struct wmi_10_4_bss_bcn_filter_stats {
4829 __le32 bcns_dropped;
4830 __le32 bcns_delivered;
4831 __le32 active_filters;
4832 struct wmi_10_4_bss_bcn_stats bss_stats;
4833} __packed;
4834
4835struct wmi_10_2_pdev_ext_stats {
4836 __le32 rx_rssi_comb;
4837 __le32 rx_rssi[4];
4838 __le32 rx_mcs[10];
4839 __le32 tx_mcs[10];
4840 __le32 ack_rssi;
4841} __packed;
4842
4843struct wmi_vdev_create_cmd {
4844 __le32 vdev_id;
4845 __le32 vdev_type;
4846 __le32 vdev_subtype;
4847 struct wmi_mac_addr vdev_macaddr;
4848} __packed;
4849
4850enum wmi_vdev_type {
4851 WMI_VDEV_TYPE_AP = 1,
4852 WMI_VDEV_TYPE_STA = 2,
4853 WMI_VDEV_TYPE_IBSS = 3,
4854 WMI_VDEV_TYPE_MONITOR = 4,
4855};
4856
4857enum wmi_vdev_subtype {
4858 WMI_VDEV_SUBTYPE_NONE,
4859 WMI_VDEV_SUBTYPE_P2P_DEVICE,
4860 WMI_VDEV_SUBTYPE_P2P_CLIENT,
4861 WMI_VDEV_SUBTYPE_P2P_GO,
4862 WMI_VDEV_SUBTYPE_PROXY_STA,
4863 WMI_VDEV_SUBTYPE_MESH_11S,
4864 WMI_VDEV_SUBTYPE_MESH_NON_11S,
4865};
4866
4867enum wmi_vdev_subtype_legacy {
4868 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0,
4869 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1,
4870 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2,
4871 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3,
4872 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4873};
4874
4875enum wmi_vdev_subtype_10_2_4 {
4876 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0,
4877 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1,
4878 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2,
4879 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3,
4880 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4881 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5,
4882};
4883
4884enum wmi_vdev_subtype_10_4 {
4885 WMI_VDEV_SUBTYPE_10_4_NONE = 0,
4886 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1,
4887 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2,
4888 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3,
4889 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4,
4890 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4891 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6,
4892};
4893
4894/* values for vdev_subtype */
4895
4896/* values for vdev_start_request flags */
4897/*
4898 * Indicates that AP VDEV uses hidden ssid. only valid for
4899 * AP/GO
4900 */
4901#define WMI_VDEV_START_HIDDEN_SSID (1 << 0)
4902/*
4903 * Indicates if robust management frame/management frame
4904 * protection is enabled. For GO/AP vdevs, it indicates that
4905 * it may support station/client associations with RMF enabled.
4906 * For STA/client vdevs, it indicates that sta will
4907 * associate with AP with RMF enabled.
4908 */
4909#define WMI_VDEV_START_PMF_ENABLED (1 << 1)
4910
4911struct wmi_p2p_noa_descriptor {
4912 __le32 type_count; /* 255: continuous schedule, 0: reserved */
4913 __le32 duration; /* Absent period duration in micro seconds */
4914 __le32 interval; /* Absent period interval in micro seconds */
4915 __le32 start_time; /* 32 bit tsf time when in starts */
4916} __packed;
4917
4918struct wmi_vdev_start_request_cmd {
4919 /* WMI channel */
4920 struct wmi_channel chan;
4921 /* unique id identifying the VDEV, generated by the caller */
4922 __le32 vdev_id;
4923 /* requestor id identifying the caller module */
4924 __le32 requestor_id;
4925 /* beacon interval from received beacon */
4926 __le32 beacon_interval;
4927 /* DTIM Period from the received beacon */
4928 __le32 dtim_period;
4929 /* Flags */
4930 __le32 flags;
4931 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4932 struct wmi_ssid ssid;
4933 /* beacon/probe response xmit rate. Applicable for SoftAP. */
4934 __le32 bcn_tx_rate;
4935 /* beacon/probe response xmit power. Applicable for SoftAP. */
4936 __le32 bcn_tx_power;
4937 /* number of p2p NOA descriptor(s) from scan entry */
4938 __le32 num_noa_descriptors;
4939 /*
4940 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4941 * During CAC, Our HW shouldn't ack ditected frames
4942 */
4943 __le32 disable_hw_ack;
4944 /* actual p2p NOA descriptor from scan entry */
4945 struct wmi_p2p_noa_descriptor noa_descriptors[2];
4946} __packed;
4947
4948struct wmi_vdev_restart_request_cmd {
4949 struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4950} __packed;
4951
4952struct wmi_vdev_start_request_arg {
4953 u32 vdev_id;
4954 struct wmi_channel_arg channel;
4955 u32 bcn_intval;
4956 u32 dtim_period;
4957 u8 *ssid;
4958 u32 ssid_len;
4959 u32 bcn_tx_rate;
4960 u32 bcn_tx_power;
4961 bool disable_hw_ack;
4962 bool hidden_ssid;
4963 bool pmf_enabled;
4964};
4965
4966struct wmi_vdev_delete_cmd {
4967 /* unique id identifying the VDEV, generated by the caller */
4968 __le32 vdev_id;
4969} __packed;
4970
4971struct wmi_vdev_up_cmd {
4972 __le32 vdev_id;
4973 __le32 vdev_assoc_id;
4974 struct wmi_mac_addr vdev_bssid;
4975} __packed;
4976
4977struct wmi_vdev_stop_cmd {
4978 __le32 vdev_id;
4979} __packed;
4980
4981struct wmi_vdev_down_cmd {
4982 __le32 vdev_id;
4983} __packed;
4984
4985struct wmi_vdev_standby_response_cmd {
4986 /* unique id identifying the VDEV, generated by the caller */
4987 __le32 vdev_id;
4988} __packed;
4989
4990struct wmi_vdev_resume_response_cmd {
4991 /* unique id identifying the VDEV, generated by the caller */
4992 __le32 vdev_id;
4993} __packed;
4994
4995struct wmi_vdev_set_param_cmd {
4996 __le32 vdev_id;
4997 __le32 param_id;
4998 __le32 param_value;
4999} __packed;
5000
5001#define WMI_MAX_KEY_INDEX 3
5002#define WMI_MAX_KEY_LEN 32
5003
5004#define WMI_KEY_PAIRWISE 0x00
5005#define WMI_KEY_GROUP 0x01
5006#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5007
5008struct wmi_key_seq_counter {
5009 __le32 key_seq_counter_l;
5010 __le32 key_seq_counter_h;
5011} __packed;
5012
5013enum wmi_cipher_suites {
5014 WMI_CIPHER_NONE,
5015 WMI_CIPHER_WEP,
5016 WMI_CIPHER_TKIP,
5017 WMI_CIPHER_AES_OCB,
5018 WMI_CIPHER_AES_CCM,
5019 WMI_CIPHER_WAPI,
5020 WMI_CIPHER_CKIP,
5021 WMI_CIPHER_AES_CMAC,
5022 WMI_CIPHER_AES_GCM,
5023};
5024
5025enum wmi_tlv_cipher_suites {
5026 WMI_TLV_CIPHER_NONE,
5027 WMI_TLV_CIPHER_WEP,
5028 WMI_TLV_CIPHER_TKIP,
5029 WMI_TLV_CIPHER_AES_OCB,
5030 WMI_TLV_CIPHER_AES_CCM,
5031 WMI_TLV_CIPHER_WAPI,
5032 WMI_TLV_CIPHER_CKIP,
5033 WMI_TLV_CIPHER_AES_CMAC,
5034 WMI_TLV_CIPHER_ANY,
5035 WMI_TLV_CIPHER_AES_GCM,
5036};
5037
5038struct wmi_vdev_install_key_cmd {
5039 __le32 vdev_id;
5040 struct wmi_mac_addr peer_macaddr;
5041 __le32 key_idx;
5042 __le32 key_flags;
5043 __le32 key_cipher; /* %WMI_CIPHER_ */
5044 struct wmi_key_seq_counter key_rsc_counter;
5045 struct wmi_key_seq_counter key_global_rsc_counter;
5046 struct wmi_key_seq_counter key_tsc_counter;
5047 u8 wpi_key_rsc_counter[16];
5048 u8 wpi_key_tsc_counter[16];
5049 __le32 key_len;
5050 __le32 key_txmic_len;
5051 __le32 key_rxmic_len;
5052
5053 /* contains key followed by tx mic followed by rx mic */
5054 u8 key_data[];
5055} __packed;
5056
5057struct wmi_vdev_install_key_arg {
5058 u32 vdev_id;
5059 const u8 *macaddr;
5060 u32 key_idx;
5061 u32 key_flags;
5062 u32 key_cipher;
5063 u32 key_len;
5064 u32 key_txmic_len;
5065 u32 key_rxmic_len;
5066 const void *key_data;
5067};
5068
5069/*
5070 * vdev fixed rate format:
5071 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5072 * - nss - b5:b4 - ss number (0 mean 1ss)
5073 * - rate_mcs - b3:b0 - as below
5074 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5075 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5076 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5077 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5078 * HT/VHT: MCS index
5079 */
5080
5081/* Preamble types to be used with VDEV fixed rate configuration */
5082enum wmi_rate_preamble {
5083 WMI_RATE_PREAMBLE_OFDM,
5084 WMI_RATE_PREAMBLE_CCK,
5085 WMI_RATE_PREAMBLE_HT,
5086 WMI_RATE_PREAMBLE_VHT,
5087};
5088
5089#define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
5090#define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
5091#define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf)
5092#define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f)
5093#define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3)
5094#define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1)
5095#define ATH10K_HW_RATECODE(rate, nss, preamble) \
5096 (((preamble) << 6) | ((nss) << 4) | (rate))
5097#define ATH10K_HW_AMPDU(flags) ((flags) & 0x1)
5098#define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3)
5099#define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1)
5100
5101#define ATH10K_VHT_MCS_NUM 10
5102#define ATH10K_BW_NUM 6
5103#define ATH10K_NSS_NUM 4
5104#define ATH10K_LEGACY_NUM 12
5105#define ATH10K_GI_NUM 2
5106#define ATH10K_HT_MCS_NUM 32
5107#define ATH10K_RATE_TABLE_NUM 320
5108#define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2
5109
5110/* Value to disable fixed rate setting */
5111#define WMI_FIXED_RATE_NONE (0xff)
5112
5113struct wmi_peer_param_map {
5114 u32 smps_state;
5115 u32 ampdu;
5116 u32 authorize;
5117 u32 chan_width;
5118 u32 nss;
5119 u32 use_4addr;
5120 u32 membership;
5121 u32 use_fixed_power;
5122 u32 user_pos;
5123 u32 crit_proto_hint_enabled;
5124 u32 tx_fail_cnt_thr;
5125 u32 set_hw_retry_cts2s;
5126 u32 ibss_atim_win_len;
5127 u32 debug;
5128 u32 phymode;
5129 u32 dummy_var;
5130};
5131
5132struct wmi_vdev_param_map {
5133 u32 rts_threshold;
5134 u32 fragmentation_threshold;
5135 u32 beacon_interval;
5136 u32 listen_interval;
5137 u32 multicast_rate;
5138 u32 mgmt_tx_rate;
5139 u32 slot_time;
5140 u32 preamble;
5141 u32 swba_time;
5142 u32 wmi_vdev_stats_update_period;
5143 u32 wmi_vdev_pwrsave_ageout_time;
5144 u32 wmi_vdev_host_swba_interval;
5145 u32 dtim_period;
5146 u32 wmi_vdev_oc_scheduler_air_time_limit;
5147 u32 wds;
5148 u32 atim_window;
5149 u32 bmiss_count_max;
5150 u32 bmiss_first_bcnt;
5151 u32 bmiss_final_bcnt;
5152 u32 feature_wmm;
5153 u32 chwidth;
5154 u32 chextoffset;
5155 u32 disable_htprotection;
5156 u32 sta_quickkickout;
5157 u32 mgmt_rate;
5158 u32 protection_mode;
5159 u32 fixed_rate;
5160 u32 sgi;
5161 u32 ldpc;
5162 u32 tx_stbc;
5163 u32 rx_stbc;
5164 u32 intra_bss_fwd;
5165 u32 def_keyid;
5166 u32 nss;
5167 u32 bcast_data_rate;
5168 u32 mcast_data_rate;
5169 u32 mcast_indicate;
5170 u32 dhcp_indicate;
5171 u32 unknown_dest_indicate;
5172 u32 ap_keepalive_min_idle_inactive_time_secs;
5173 u32 ap_keepalive_max_idle_inactive_time_secs;
5174 u32 ap_keepalive_max_unresponsive_time_secs;
5175 u32 ap_enable_nawds;
5176 u32 mcast2ucast_set;
5177 u32 enable_rtscts;
5178 u32 txbf;
5179 u32 packet_powersave;
5180 u32 drop_unencry;
5181 u32 tx_encap_type;
5182 u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5183 u32 rc_num_retries;
5184 u32 cabq_maxdur;
5185 u32 mfptest_set;
5186 u32 rts_fixed_rate;
5187 u32 vht_sgimask;
5188 u32 vht80_ratemask;
5189 u32 early_rx_adjust_enable;
5190 u32 early_rx_tgt_bmiss_num;
5191 u32 early_rx_bmiss_sample_cycle;
5192 u32 early_rx_slop_step;
5193 u32 early_rx_init_slop;
5194 u32 early_rx_adjust_pause;
5195 u32 proxy_sta;
5196 u32 meru_vc;
5197 u32 rx_decap_type;
5198 u32 bw_nss_ratemask;
5199 u32 inc_tsf;
5200 u32 dec_tsf;
5201 u32 disable_4addr_src_lrn;
5202 u32 rtt_responder_role;
5203};
5204
5205#define WMI_VDEV_PARAM_UNSUPPORTED 0
5206
5207/* the definition of different VDEV parameters */
5208enum wmi_vdev_param {
5209 /* RTS Threshold */
5210 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5211 /* Fragmentation threshold */
5212 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5213 /* beacon interval in TUs */
5214 WMI_VDEV_PARAM_BEACON_INTERVAL,
5215 /* Listen interval in TUs */
5216 WMI_VDEV_PARAM_LISTEN_INTERVAL,
5217 /* multicast rate in Mbps */
5218 WMI_VDEV_PARAM_MULTICAST_RATE,
5219 /* management frame rate in Mbps */
5220 WMI_VDEV_PARAM_MGMT_TX_RATE,
5221 /* slot time (long vs short) */
5222 WMI_VDEV_PARAM_SLOT_TIME,
5223 /* preamble (long vs short) */
5224 WMI_VDEV_PARAM_PREAMBLE,
5225 /* SWBA time (time before tbtt in msec) */
5226 WMI_VDEV_PARAM_SWBA_TIME,
5227 /* time period for updating VDEV stats */
5228 WMI_VDEV_STATS_UPDATE_PERIOD,
5229 /* age out time in msec for frames queued for station in power save */
5230 WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5231 /*
5232 * Host SWBA interval (time in msec before tbtt for SWBA event
5233 * generation).
5234 */
5235 WMI_VDEV_HOST_SWBA_INTERVAL,
5236 /* DTIM period (specified in units of num beacon intervals) */
5237 WMI_VDEV_PARAM_DTIM_PERIOD,
5238 /*
5239 * scheduler air time limit for this VDEV. used by off chan
5240 * scheduler.
5241 */
5242 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5243 /* enable/disable WDS for this VDEV */
5244 WMI_VDEV_PARAM_WDS,
5245 /* ATIM Window */
5246 WMI_VDEV_PARAM_ATIM_WINDOW,
5247 /* BMISS max */
5248 WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5249 /* BMISS first time */
5250 WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5251 /* BMISS final time */
5252 WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5253 /* WMM enables/disabled */
5254 WMI_VDEV_PARAM_FEATURE_WMM,
5255 /* Channel width */
5256 WMI_VDEV_PARAM_CHWIDTH,
5257 /* Channel Offset */
5258 WMI_VDEV_PARAM_CHEXTOFFSET,
5259 /* Disable HT Protection */
5260 WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5261 /* Quick STA Kickout */
5262 WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5263 /* Rate to be used with Management frames */
5264 WMI_VDEV_PARAM_MGMT_RATE,
5265 /* Protection Mode */
5266 WMI_VDEV_PARAM_PROTECTION_MODE,
5267 /* Fixed rate setting */
5268 WMI_VDEV_PARAM_FIXED_RATE,
5269 /* Short GI Enable/Disable */
5270 WMI_VDEV_PARAM_SGI,
5271 /* Enable LDPC */
5272 WMI_VDEV_PARAM_LDPC,
5273 /* Enable Tx STBC */
5274 WMI_VDEV_PARAM_TX_STBC,
5275 /* Enable Rx STBC */
5276 WMI_VDEV_PARAM_RX_STBC,
5277 /* Intra BSS forwarding */
5278 WMI_VDEV_PARAM_INTRA_BSS_FWD,
5279 /* Setting Default xmit key for Vdev */
5280 WMI_VDEV_PARAM_DEF_KEYID,
5281 /* NSS width */
5282 WMI_VDEV_PARAM_NSS,
5283 /* Set the custom rate for the broadcast data frames */
5284 WMI_VDEV_PARAM_BCAST_DATA_RATE,
5285 /* Set the custom rate (rate-code) for multicast data frames */
5286 WMI_VDEV_PARAM_MCAST_DATA_RATE,
5287 /* Tx multicast packet indicate Enable/Disable */
5288 WMI_VDEV_PARAM_MCAST_INDICATE,
5289 /* Tx DHCP packet indicate Enable/Disable */
5290 WMI_VDEV_PARAM_DHCP_INDICATE,
5291 /* Enable host inspection of Tx unicast packet to unknown destination */
5292 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5293
5294 /* The minimum amount of time AP begins to consider STA inactive */
5295 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5296
5297 /*
5298 * An associated STA is considered inactive when there is no recent
5299 * TX/RX activity and no downlink frames are buffered for it. Once a
5300 * STA exceeds the maximum idle inactive time, the AP will send an
5301 * 802.11 data-null as a keep alive to verify the STA is still
5302 * associated. If the STA does ACK the data-null, or if the data-null
5303 * is buffered and the STA does not retrieve it, the STA will be
5304 * considered unresponsive
5305 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5306 */
5307 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5308
5309 /*
5310 * An associated STA is considered unresponsive if there is no recent
5311 * TX/RX activity and downlink frames are buffered for it. Once a STA
5312 * exceeds the maximum unresponsive time, the AP will send a
5313 * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5314 */
5315 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5316
5317 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5318 WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5319 /* Enable/Disable RTS-CTS */
5320 WMI_VDEV_PARAM_ENABLE_RTSCTS,
5321 /* Enable TXBFee/er */
5322 WMI_VDEV_PARAM_TXBF,
5323
5324 /* Set packet power save */
5325 WMI_VDEV_PARAM_PACKET_POWERSAVE,
5326
5327 /*
5328 * Drops un-encrypted packets if eceived in an encrypted connection
5329 * otherwise forwards to host.
5330 */
5331 WMI_VDEV_PARAM_DROP_UNENCRY,
5332
5333 /*
5334 * Set the encapsulation type for frames.
5335 */
5336 WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5337};
5338
5339/* the definition of different VDEV parameters */
5340enum wmi_10x_vdev_param {
5341 /* RTS Threshold */
5342 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5343 /* Fragmentation threshold */
5344 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5345 /* beacon interval in TUs */
5346 WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5347 /* Listen interval in TUs */
5348 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5349 /* multicast rate in Mbps */
5350 WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5351 /* management frame rate in Mbps */
5352 WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5353 /* slot time (long vs short) */
5354 WMI_10X_VDEV_PARAM_SLOT_TIME,
5355 /* preamble (long vs short) */
5356 WMI_10X_VDEV_PARAM_PREAMBLE,
5357 /* SWBA time (time before tbtt in msec) */
5358 WMI_10X_VDEV_PARAM_SWBA_TIME,
5359 /* time period for updating VDEV stats */
5360 WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5361 /* age out time in msec for frames queued for station in power save */
5362 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5363 /*
5364 * Host SWBA interval (time in msec before tbtt for SWBA event
5365 * generation).
5366 */
5367 WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5368 /* DTIM period (specified in units of num beacon intervals) */
5369 WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5370 /*
5371 * scheduler air time limit for this VDEV. used by off chan
5372 * scheduler.
5373 */
5374 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5375 /* enable/disable WDS for this VDEV */
5376 WMI_10X_VDEV_PARAM_WDS,
5377 /* ATIM Window */
5378 WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5379 /* BMISS max */
5380 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5381 /* WMM enables/disabled */
5382 WMI_10X_VDEV_PARAM_FEATURE_WMM,
5383 /* Channel width */
5384 WMI_10X_VDEV_PARAM_CHWIDTH,
5385 /* Channel Offset */
5386 WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5387 /* Disable HT Protection */
5388 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5389 /* Quick STA Kickout */
5390 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5391 /* Rate to be used with Management frames */
5392 WMI_10X_VDEV_PARAM_MGMT_RATE,
5393 /* Protection Mode */
5394 WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5395 /* Fixed rate setting */
5396 WMI_10X_VDEV_PARAM_FIXED_RATE,
5397 /* Short GI Enable/Disable */
5398 WMI_10X_VDEV_PARAM_SGI,
5399 /* Enable LDPC */
5400 WMI_10X_VDEV_PARAM_LDPC,
5401 /* Enable Tx STBC */
5402 WMI_10X_VDEV_PARAM_TX_STBC,
5403 /* Enable Rx STBC */
5404 WMI_10X_VDEV_PARAM_RX_STBC,
5405 /* Intra BSS forwarding */
5406 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5407 /* Setting Default xmit key for Vdev */
5408 WMI_10X_VDEV_PARAM_DEF_KEYID,
5409 /* NSS width */
5410 WMI_10X_VDEV_PARAM_NSS,
5411 /* Set the custom rate for the broadcast data frames */
5412 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5413 /* Set the custom rate (rate-code) for multicast data frames */
5414 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5415 /* Tx multicast packet indicate Enable/Disable */
5416 WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5417 /* Tx DHCP packet indicate Enable/Disable */
5418 WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5419 /* Enable host inspection of Tx unicast packet to unknown destination */
5420 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5421
5422 /* The minimum amount of time AP begins to consider STA inactive */
5423 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5424
5425 /*
5426 * An associated STA is considered inactive when there is no recent
5427 * TX/RX activity and no downlink frames are buffered for it. Once a
5428 * STA exceeds the maximum idle inactive time, the AP will send an
5429 * 802.11 data-null as a keep alive to verify the STA is still
5430 * associated. If the STA does ACK the data-null, or if the data-null
5431 * is buffered and the STA does not retrieve it, the STA will be
5432 * considered unresponsive
5433 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5434 */
5435 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5436
5437 /*
5438 * An associated STA is considered unresponsive if there is no recent
5439 * TX/RX activity and downlink frames are buffered for it. Once a STA
5440 * exceeds the maximum unresponsive time, the AP will send a
5441 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5442 */
5443 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5444
5445 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5446 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5447
5448 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5449 /* Enable/Disable RTS-CTS */
5450 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5451
5452 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5453
5454 /* following are available as of firmware 10.2 */
5455 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5456 WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5457 WMI_10X_VDEV_PARAM_MFPTEST_SET,
5458 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5459 WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5460 WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5461 WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5462};
5463
5464enum wmi_10_4_vdev_param {
5465 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5466 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5467 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5468 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5469 WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5470 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5471 WMI_10_4_VDEV_PARAM_SLOT_TIME,
5472 WMI_10_4_VDEV_PARAM_PREAMBLE,
5473 WMI_10_4_VDEV_PARAM_SWBA_TIME,
5474 WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5475 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5476 WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5477 WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5478 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5479 WMI_10_4_VDEV_PARAM_WDS,
5480 WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5481 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5482 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5483 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5484 WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5485 WMI_10_4_VDEV_PARAM_CHWIDTH,
5486 WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5487 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5488 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5489 WMI_10_4_VDEV_PARAM_MGMT_RATE,
5490 WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5491 WMI_10_4_VDEV_PARAM_FIXED_RATE,
5492 WMI_10_4_VDEV_PARAM_SGI,
5493 WMI_10_4_VDEV_PARAM_LDPC,
5494 WMI_10_4_VDEV_PARAM_TX_STBC,
5495 WMI_10_4_VDEV_PARAM_RX_STBC,
5496 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5497 WMI_10_4_VDEV_PARAM_DEF_KEYID,
5498 WMI_10_4_VDEV_PARAM_NSS,
5499 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5500 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5501 WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5502 WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5503 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5504 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5505 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5506 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5507 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5508 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5509 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5510 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5511 WMI_10_4_VDEV_PARAM_TXBF,
5512 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5513 WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5514 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5515 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5516 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5517 WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5518 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5519 WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5520 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5521 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5522 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5523 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5524 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5525 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5526 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5527 WMI_10_4_VDEV_PARAM_PROXY_STA,
5528 WMI_10_4_VDEV_PARAM_MERU_VC,
5529 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5530 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5531 WMI_10_4_VDEV_PARAM_SENSOR_AP,
5532 WMI_10_4_VDEV_PARAM_BEACON_RATE,
5533 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5534 WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5535 WMI_10_4_VDEV_PARAM_CAPABILITIES,
5536 WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5537 WMI_10_4_VDEV_PARAM_RX_FILTER,
5538 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5539 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5540 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5541 WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5542 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5543 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5544 WMI_10_4_VDEV_PARAM_NSS_VHT160,
5545 WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5546 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5547 WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5548 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5549 WMI_10_4_VDEV_PARAM_TX_POWER,
5550 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5551 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5552};
5553
5554#define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5555
5556#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5557#define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5558#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5559#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5560
5561#define WMI_TXBF_STS_CAP_OFFSET_LSB 4
5562#define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70
5563#define WMI_TXBF_CONF_IMPLICIT_BF BIT(7)
5564#define WMI_BF_SOUND_DIM_OFFSET_LSB 8
5565#define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
5566
5567/* slot time long */
5568#define WMI_VDEV_SLOT_TIME_LONG 0x1
5569/* slot time short */
5570#define WMI_VDEV_SLOT_TIME_SHORT 0x2
5571/* preablbe long */
5572#define WMI_VDEV_PREAMBLE_LONG 0x1
5573/* preablbe short */
5574#define WMI_VDEV_PREAMBLE_SHORT 0x2
5575
5576enum wmi_start_event_param {
5577 WMI_VDEV_RESP_START_EVENT = 0,
5578 WMI_VDEV_RESP_RESTART_EVENT,
5579};
5580
5581struct wmi_vdev_start_response_event {
5582 __le32 vdev_id;
5583 __le32 req_id;
5584 __le32 resp_type; /* %WMI_VDEV_RESP_ */
5585 __le32 status;
5586} __packed;
5587
5588struct wmi_vdev_standby_req_event {
5589 /* unique id identifying the VDEV, generated by the caller */
5590 __le32 vdev_id;
5591} __packed;
5592
5593struct wmi_vdev_resume_req_event {
5594 /* unique id identifying the VDEV, generated by the caller */
5595 __le32 vdev_id;
5596} __packed;
5597
5598struct wmi_vdev_stopped_event {
5599 /* unique id identifying the VDEV, generated by the caller */
5600 __le32 vdev_id;
5601} __packed;
5602
5603/*
5604 * common structure used for simple events
5605 * (stopped, resume_req, standby response)
5606 */
5607struct wmi_vdev_simple_event {
5608 /* unique id identifying the VDEV, generated by the caller */
5609 __le32 vdev_id;
5610} __packed;
5611
5612/* VDEV start response status codes */
5613/* VDEV successfully started */
5614#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0
5615
5616/* requested VDEV not found */
5617#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1
5618
5619/* unsupported VDEV combination */
5620#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
5621
5622/* TODO: please add more comments if you have in-depth information */
5623struct wmi_vdev_spectral_conf_cmd {
5624 __le32 vdev_id;
5625
5626 /* number of fft samples to send (0 for infinite) */
5627 __le32 scan_count;
5628 __le32 scan_period;
5629 __le32 scan_priority;
5630
5631 /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5632 __le32 scan_fft_size;
5633 __le32 scan_gc_ena;
5634 __le32 scan_restart_ena;
5635 __le32 scan_noise_floor_ref;
5636 __le32 scan_init_delay;
5637 __le32 scan_nb_tone_thr;
5638 __le32 scan_str_bin_thr;
5639 __le32 scan_wb_rpt_mode;
5640 __le32 scan_rssi_rpt_mode;
5641 __le32 scan_rssi_thr;
5642 __le32 scan_pwr_format;
5643
5644 /* rpt_mode: Format of FFT report to software for spectral scan
5645 * triggered FFTs:
5646 * 0: No FFT report (only spectral scan summary report)
5647 * 1: 2-dword summary of metrics for each completed FFT + spectral
5648 * scan summary report
5649 * 2: 2-dword summary of metrics for each completed FFT +
5650 * 1x- oversampled bins(in-band) per FFT + spectral scan summary
5651 * report
5652 * 3: 2-dword summary of metrics for each completed FFT +
5653 * 2x- oversampled bins (all) per FFT + spectral scan summary
5654 */
5655 __le32 scan_rpt_mode;
5656 __le32 scan_bin_scale;
5657 __le32 scan_dbm_adj;
5658 __le32 scan_chn_mask;
5659} __packed;
5660
5661struct wmi_vdev_spectral_conf_arg {
5662 u32 vdev_id;
5663 u32 scan_count;
5664 u32 scan_period;
5665 u32 scan_priority;
5666 u32 scan_fft_size;
5667 u32 scan_gc_ena;
5668 u32 scan_restart_ena;
5669 u32 scan_noise_floor_ref;
5670 u32 scan_init_delay;
5671 u32 scan_nb_tone_thr;
5672 u32 scan_str_bin_thr;
5673 u32 scan_wb_rpt_mode;
5674 u32 scan_rssi_rpt_mode;
5675 u32 scan_rssi_thr;
5676 u32 scan_pwr_format;
5677 u32 scan_rpt_mode;
5678 u32 scan_bin_scale;
5679 u32 scan_dbm_adj;
5680 u32 scan_chn_mask;
5681};
5682
5683#define WMI_SPECTRAL_ENABLE_DEFAULT 0
5684#define WMI_SPECTRAL_COUNT_DEFAULT 0
5685#define WMI_SPECTRAL_PERIOD_DEFAULT 35
5686#define WMI_SPECTRAL_PRIORITY_DEFAULT 1
5687#define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
5688#define WMI_SPECTRAL_GC_ENA_DEFAULT 1
5689#define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
5690#define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
5691#define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
5692#define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
5693#define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
5694#define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
5695#define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
5696#define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
5697#define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
5698#define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
5699#define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
5700#define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
5701#define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
5702
5703struct wmi_vdev_spectral_enable_cmd {
5704 __le32 vdev_id;
5705 __le32 trigger_cmd;
5706 __le32 enable_cmd;
5707} __packed;
5708
5709#define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
5710#define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
5711#define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
5712#define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
5713
5714/* Beacon processing related command and event structures */
5715struct wmi_bcn_tx_hdr {
5716 __le32 vdev_id;
5717 __le32 tx_rate;
5718 __le32 tx_power;
5719 __le32 bcn_len;
5720} __packed;
5721
5722struct wmi_bcn_tx_cmd {
5723 struct wmi_bcn_tx_hdr hdr;
5724 u8 *bcn[];
5725} __packed;
5726
5727struct wmi_bcn_tx_arg {
5728 u32 vdev_id;
5729 u32 tx_rate;
5730 u32 tx_power;
5731 u32 bcn_len;
5732 const void *bcn;
5733};
5734
5735enum wmi_bcn_tx_ref_flags {
5736 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5737 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5738};
5739
5740/* TODO: It is unclear why "no antenna" works while any other seemingly valid
5741 * chainmask yields no beacons on the air at all.
5742 */
5743#define WMI_BCN_TX_REF_DEF_ANTENNA 0
5744
5745struct wmi_bcn_tx_ref_cmd {
5746 __le32 vdev_id;
5747 __le32 data_len;
5748 /* physical address of the frame - dma pointer */
5749 __le32 data_ptr;
5750 /* id for host to track */
5751 __le32 msdu_id;
5752 /* frame ctrl to setup PPDU desc */
5753 __le32 frame_control;
5754 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5755 __le32 flags;
5756 /* introduced in 10.2 */
5757 __le32 antenna_mask;
5758} __packed;
5759
5760/* Beacon filter */
5761#define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */
5762#define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */
5763#define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */
5764#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5765#define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */
5766
5767struct wmi_bcn_filter_rx_cmd {
5768 /* Filter ID */
5769 __le32 bcn_filter_id;
5770 /* Filter type - wmi_bcn_filter */
5771 __le32 bcn_filter;
5772 /* Buffer len */
5773 __le32 bcn_filter_len;
5774 /* Filter info (threshold, BSSID, RSSI) */
5775 u8 *bcn_filter_buf;
5776} __packed;
5777
5778/* Capabilities and IEs to be passed to firmware */
5779struct wmi_bcn_prb_info {
5780 /* Capabilities */
5781 __le32 caps;
5782 /* ERP info */
5783 __le32 erp;
5784 /* Advanced capabilities */
5785 /* HT capabilities */
5786 /* HT Info */
5787 /* ibss_dfs */
5788 /* wpa Info */
5789 /* rsn Info */
5790 /* rrm info */
5791 /* ath_ext */
5792 /* app IE */
5793} __packed;
5794
5795struct wmi_bcn_tmpl_cmd {
5796 /* unique id identifying the VDEV, generated by the caller */
5797 __le32 vdev_id;
5798 /* TIM IE offset from the beginning of the template. */
5799 __le32 tim_ie_offset;
5800 /* beacon probe capabilities and IEs */
5801 struct wmi_bcn_prb_info bcn_prb_info;
5802 /* beacon buffer length */
5803 __le32 buf_len;
5804 /* variable length data */
5805 u8 data[1];
5806} __packed;
5807
5808struct wmi_prb_tmpl_cmd {
5809 /* unique id identifying the VDEV, generated by the caller */
5810 __le32 vdev_id;
5811 /* beacon probe capabilities and IEs */
5812 struct wmi_bcn_prb_info bcn_prb_info;
5813 /* beacon buffer length */
5814 __le32 buf_len;
5815 /* Variable length data */
5816 u8 data[1];
5817} __packed;
5818
5819enum wmi_sta_ps_mode {
5820 /* enable power save for the given STA VDEV */
5821 WMI_STA_PS_MODE_DISABLED = 0,
5822 /* disable power save for a given STA VDEV */
5823 WMI_STA_PS_MODE_ENABLED = 1,
5824};
5825
5826struct wmi_sta_powersave_mode_cmd {
5827 /* unique id identifying the VDEV, generated by the caller */
5828 __le32 vdev_id;
5829
5830 /*
5831 * Power save mode
5832 * (see enum wmi_sta_ps_mode)
5833 */
5834 __le32 sta_ps_mode;
5835} __packed;
5836
5837enum wmi_csa_offload_en {
5838 WMI_CSA_OFFLOAD_DISABLE = 0,
5839 WMI_CSA_OFFLOAD_ENABLE = 1,
5840};
5841
5842struct wmi_csa_offload_enable_cmd {
5843 __le32 vdev_id;
5844 __le32 csa_offload_enable;
5845} __packed;
5846
5847struct wmi_csa_offload_chanswitch_cmd {
5848 __le32 vdev_id;
5849 struct wmi_channel chan;
5850} __packed;
5851
5852/*
5853 * This parameter controls the policy for retrieving frames from AP while the
5854 * STA is in sleep state.
5855 *
5856 * Only takes affect if the sta_ps_mode is enabled
5857 */
5858enum wmi_sta_ps_param_rx_wake_policy {
5859 /*
5860 * Wake up when ever there is an RX activity on the VDEV. In this mode
5861 * the Power save SM(state machine) will come out of sleep by either
5862 * sending null frame (or) a data frame (with PS==0) in response to TIM
5863 * bit set in the received beacon frame from AP.
5864 */
5865 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5866
5867 /*
5868 * Here the power save state machine will not wakeup in response to TIM
5869 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5870 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
5871 * access categories are delivery-enabled, the station will send a
5872 * UAPSD trigger frame, otherwise it will send a PS-Poll.
5873 */
5874 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5875};
5876
5877/*
5878 * Number of tx frames/beacon that cause the power save SM to wake up.
5879 *
5880 * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5881 * meaning, It will cause the SM to never wake up. This is useful if you want
5882 * to keep the system to sleep all the time for some kind of test mode . host
5883 * can change this parameter any time. It will affect at the next tx frame.
5884 */
5885enum wmi_sta_ps_param_tx_wake_threshold {
5886 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5887 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5888
5889 /*
5890 * Values greater than one indicate that many TX attempts per beacon
5891 * interval before the STA will wake up
5892 */
5893};
5894
5895/*
5896 * The maximum number of PS-Poll frames the FW will send in response to
5897 * traffic advertised in TIM before waking up (by sending a null frame with PS
5898 * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5899 * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5900 * parameter is used when the RX wake policy is
5901 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5902 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5903 */
5904enum wmi_sta_ps_param_pspoll_count {
5905 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5906 /*
5907 * Values greater than 0 indicate the maximum number of PS-Poll frames
5908 * FW will send before waking up.
5909 */
5910
5911 /* When u-APSD is enabled the firmware will be very reluctant to exit
5912 * STA PS. This could result in very poor Rx performance with STA doing
5913 * PS-Poll for each and every buffered frame. This value is a bit
5914 * arbitrary.
5915 */
5916 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5917};
5918
5919/*
5920 * This will include the delivery and trigger enabled state for every AC.
5921 * This is the negotiated state with AP. The host MLME needs to set this based
5922 * on AP capability and the state Set in the association request by the
5923 * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5924 */
5925#define WMI_UAPSD_AC_TYPE_DELI 0
5926#define WMI_UAPSD_AC_TYPE_TRIG 1
5927
5928#define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5929 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5930
5931enum wmi_sta_ps_param_uapsd {
5932 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5933 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
5934 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5935 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
5936 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5937 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
5938 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5939 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
5940};
5941
5942#define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5943
5944struct wmi_sta_uapsd_auto_trig_param {
5945 __le32 wmm_ac;
5946 __le32 user_priority;
5947 __le32 service_interval;
5948 __le32 suspend_interval;
5949 __le32 delay_interval;
5950};
5951
5952struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5953 __le32 vdev_id;
5954 struct wmi_mac_addr peer_macaddr;
5955 __le32 num_ac;
5956};
5957
5958struct wmi_sta_uapsd_auto_trig_arg {
5959 u32 wmm_ac;
5960 u32 user_priority;
5961 u32 service_interval;
5962 u32 suspend_interval;
5963 u32 delay_interval;
5964};
5965
5966enum wmi_sta_powersave_param {
5967 /*
5968 * Controls how frames are retrievd from AP while STA is sleeping
5969 *
5970 * (see enum wmi_sta_ps_param_rx_wake_policy)
5971 */
5972 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5973
5974 /*
5975 * The STA will go active after this many TX
5976 *
5977 * (see enum wmi_sta_ps_param_tx_wake_threshold)
5978 */
5979 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5980
5981 /*
5982 * Number of PS-Poll to send before STA wakes up
5983 *
5984 * (see enum wmi_sta_ps_param_pspoll_count)
5985 *
5986 */
5987 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5988
5989 /*
5990 * TX/RX inactivity time in msec before going to sleep.
5991 *
5992 * The power save SM will monitor tx/rx activity on the VDEV, if no
5993 * activity for the specified msec of the parameter the Power save
5994 * SM will go to sleep.
5995 */
5996 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5997
5998 /*
5999 * Set uapsd configuration.
6000 *
6001 * (see enum wmi_sta_ps_param_uapsd)
6002 */
6003 WMI_STA_PS_PARAM_UAPSD = 4,
6004};
6005
6006struct wmi_sta_powersave_param_cmd {
6007 __le32 vdev_id;
6008 __le32 param_id; /* %WMI_STA_PS_PARAM_ */
6009 __le32 param_value;
6010} __packed;
6011
6012/* No MIMO power save */
6013#define WMI_STA_MIMO_PS_MODE_DISABLE
6014/* mimo powersave mode static*/
6015#define WMI_STA_MIMO_PS_MODE_STATIC
6016/* mimo powersave mode dynamic */
6017#define WMI_STA_MIMO_PS_MODE_DYNAMIC
6018
6019struct wmi_sta_mimo_ps_mode_cmd {
6020 /* unique id identifying the VDEV, generated by the caller */
6021 __le32 vdev_id;
6022 /* mimo powersave mode as defined above */
6023 __le32 mimo_pwrsave_mode;
6024} __packed;
6025
6026/* U-APSD configuration of peer station from (re)assoc request and TSPECs */
6027enum wmi_ap_ps_param_uapsd {
6028 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
6029 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
6030 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6031 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
6032 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6033 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
6034 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6035 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
6036};
6037
6038/* U-APSD maximum service period of peer station */
6039enum wmi_ap_ps_peer_param_max_sp {
6040 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6041 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6042 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6043 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6044 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6045};
6046
6047/*
6048 * AP power save parameter
6049 * Set a power save specific parameter for a peer station
6050 */
6051enum wmi_ap_ps_peer_param {
6052 /* Set uapsd configuration for a given peer.
6053 *
6054 * Include the delivery and trigger enabled state for every AC.
6055 * The host MLME needs to set this based on AP capability and stations
6056 * request Set in the association request received from the station.
6057 *
6058 * Lower 8 bits of the value specify the UAPSD configuration.
6059 *
6060 * (see enum wmi_ap_ps_param_uapsd)
6061 * The default value is 0.
6062 */
6063 WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6064
6065 /*
6066 * Set the service period for a UAPSD capable station
6067 *
6068 * The service period from wme ie in the (re)assoc request frame.
6069 *
6070 * (see enum wmi_ap_ps_peer_param_max_sp)
6071 */
6072 WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6073
6074 /* Time in seconds for aging out buffered frames for STA in PS */
6075 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6076};
6077
6078struct wmi_ap_ps_peer_cmd {
6079 /* unique id identifying the VDEV, generated by the caller */
6080 __le32 vdev_id;
6081
6082 /* peer MAC address */
6083 struct wmi_mac_addr peer_macaddr;
6084
6085 /* AP powersave param (see enum wmi_ap_ps_peer_param) */
6086 __le32 param_id;
6087
6088 /* AP powersave param value */
6089 __le32 param_value;
6090} __packed;
6091
6092/* 128 clients = 4 words */
6093#define WMI_TIM_BITMAP_ARRAY_SIZE 4
6094
6095struct wmi_tim_info {
6096 __le32 tim_len;
6097 __le32 tim_mcast;
6098 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6099 __le32 tim_changed;
6100 __le32 tim_num_ps_pending;
6101} __packed;
6102
6103struct wmi_tim_info_arg {
6104 __le32 tim_len;
6105 __le32 tim_mcast;
6106 const __le32 *tim_bitmap;
6107 __le32 tim_changed;
6108 __le32 tim_num_ps_pending;
6109} __packed;
6110
6111/* Maximum number of NOA Descriptors supported */
6112#define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6113#define WMI_P2P_OPPPS_ENABLE_BIT BIT(0)
6114#define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1
6115#define WMI_P2P_NOA_CHANGED_BIT BIT(0)
6116
6117struct wmi_p2p_noa_info {
6118 /* Bit 0 - Flag to indicate an update in NOA schedule
6119 * Bits 7-1 - Reserved
6120 */
6121 u8 changed;
6122 /* NOA index */
6123 u8 index;
6124 /* Bit 0 - Opp PS state of the AP
6125 * Bits 1-7 - Ctwindow in TUs
6126 */
6127 u8 ctwindow_oppps;
6128 /* Number of NOA descriptors */
6129 u8 num_descriptors;
6130
6131 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6132} __packed;
6133
6134struct wmi_bcn_info {
6135 struct wmi_tim_info tim_info;
6136 struct wmi_p2p_noa_info p2p_noa_info;
6137} __packed;
6138
6139struct wmi_host_swba_event {
6140 __le32 vdev_map;
6141 struct wmi_bcn_info bcn_info[];
6142} __packed;
6143
6144struct wmi_10_2_4_bcn_info {
6145 struct wmi_tim_info tim_info;
6146 /* The 10.2.4 FW doesn't have p2p NOA info */
6147} __packed;
6148
6149struct wmi_10_2_4_host_swba_event {
6150 __le32 vdev_map;
6151 struct wmi_10_2_4_bcn_info bcn_info[];
6152} __packed;
6153
6154/* 16 words = 512 client + 1 word = for guard */
6155#define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6156
6157struct wmi_10_4_tim_info {
6158 __le32 tim_len;
6159 __le32 tim_mcast;
6160 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6161 __le32 tim_changed;
6162 __le32 tim_num_ps_pending;
6163} __packed;
6164
6165#define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6166
6167struct wmi_10_4_p2p_noa_info {
6168 /* Bit 0 - Flag to indicate an update in NOA schedule
6169 * Bits 7-1 - Reserved
6170 */
6171 u8 changed;
6172 /* NOA index */
6173 u8 index;
6174 /* Bit 0 - Opp PS state of the AP
6175 * Bits 1-7 - Ctwindow in TUs
6176 */
6177 u8 ctwindow_oppps;
6178 /* Number of NOA descriptors */
6179 u8 num_descriptors;
6180
6181 struct wmi_p2p_noa_descriptor
6182 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6183} __packed;
6184
6185struct wmi_10_4_bcn_info {
6186 struct wmi_10_4_tim_info tim_info;
6187 struct wmi_10_4_p2p_noa_info p2p_noa_info;
6188} __packed;
6189
6190struct wmi_10_4_host_swba_event {
6191 __le32 vdev_map;
6192 struct wmi_10_4_bcn_info bcn_info[];
6193} __packed;
6194
6195#define WMI_MAX_AP_VDEV 16
6196
6197struct wmi_tbtt_offset_event {
6198 __le32 vdev_map;
6199 __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6200} __packed;
6201
6202struct wmi_peer_create_cmd {
6203 __le32 vdev_id;
6204 struct wmi_mac_addr peer_macaddr;
6205 __le32 peer_type;
6206} __packed;
6207
6208enum wmi_peer_type {
6209 WMI_PEER_TYPE_DEFAULT = 0,
6210 WMI_PEER_TYPE_BSS = 1,
6211 WMI_PEER_TYPE_TDLS = 2,
6212};
6213
6214struct wmi_peer_delete_cmd {
6215 __le32 vdev_id;
6216 struct wmi_mac_addr peer_macaddr;
6217} __packed;
6218
6219struct wmi_peer_flush_tids_cmd {
6220 __le32 vdev_id;
6221 struct wmi_mac_addr peer_macaddr;
6222 __le32 peer_tid_bitmap;
6223} __packed;
6224
6225struct wmi_fixed_rate {
6226 /*
6227 * rate mode . 0: disable fixed rate (auto rate)
6228 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps
6229 * 2: ht20 11n rate specified as mcs index
6230 * 3: ht40 11n rate specified as mcs index
6231 */
6232 __le32 rate_mode;
6233 /*
6234 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6235 * and series 3 is stored at byte 3 (MSB)
6236 */
6237 __le32 rate_series;
6238 /*
6239 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6240 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6241 * (MSB)
6242 */
6243 __le32 rate_retries;
6244} __packed;
6245
6246struct wmi_peer_fixed_rate_cmd {
6247 /* unique id identifying the VDEV, generated by the caller */
6248 __le32 vdev_id;
6249 /* peer MAC address */
6250 struct wmi_mac_addr peer_macaddr;
6251 /* fixed rate */
6252 struct wmi_fixed_rate peer_fixed_rate;
6253} __packed;
6254
6255#define WMI_MGMT_TID 17
6256
6257struct wmi_addba_clear_resp_cmd {
6258 /* unique id identifying the VDEV, generated by the caller */
6259 __le32 vdev_id;
6260 /* peer MAC address */
6261 struct wmi_mac_addr peer_macaddr;
6262} __packed;
6263
6264struct wmi_addba_send_cmd {
6265 /* unique id identifying the VDEV, generated by the caller */
6266 __le32 vdev_id;
6267 /* peer MAC address */
6268 struct wmi_mac_addr peer_macaddr;
6269 /* Tid number */
6270 __le32 tid;
6271 /* Buffer/Window size*/
6272 __le32 buffersize;
6273} __packed;
6274
6275struct wmi_delba_send_cmd {
6276 /* unique id identifying the VDEV, generated by the caller */
6277 __le32 vdev_id;
6278 /* peer MAC address */
6279 struct wmi_mac_addr peer_macaddr;
6280 /* Tid number */
6281 __le32 tid;
6282 /* Is Initiator */
6283 __le32 initiator;
6284 /* Reason code */
6285 __le32 reasoncode;
6286} __packed;
6287
6288struct wmi_addba_setresponse_cmd {
6289 /* unique id identifying the vdev, generated by the caller */
6290 __le32 vdev_id;
6291 /* peer mac address */
6292 struct wmi_mac_addr peer_macaddr;
6293 /* Tid number */
6294 __le32 tid;
6295 /* status code */
6296 __le32 statuscode;
6297} __packed;
6298
6299struct wmi_send_singleamsdu_cmd {
6300 /* unique id identifying the vdev, generated by the caller */
6301 __le32 vdev_id;
6302 /* peer mac address */
6303 struct wmi_mac_addr peer_macaddr;
6304 /* Tid number */
6305 __le32 tid;
6306} __packed;
6307
6308enum wmi_peer_smps_state {
6309 WMI_PEER_SMPS_PS_NONE = 0x0,
6310 WMI_PEER_SMPS_STATIC = 0x1,
6311 WMI_PEER_SMPS_DYNAMIC = 0x2
6312};
6313
6314enum wmi_peer_chwidth {
6315 WMI_PEER_CHWIDTH_20MHZ = 0,
6316 WMI_PEER_CHWIDTH_40MHZ = 1,
6317 WMI_PEER_CHWIDTH_80MHZ = 2,
6318 WMI_PEER_CHWIDTH_160MHZ = 3,
6319};
6320
6321enum wmi_peer_param {
6322 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6323 WMI_PEER_AMPDU = 0x2,
6324 WMI_PEER_AUTHORIZE = 0x3,
6325 WMI_PEER_CHAN_WIDTH = 0x4,
6326 WMI_PEER_NSS = 0x5,
6327 WMI_PEER_USE_4ADDR = 0x6,
6328 WMI_PEER_USE_FIXED_PWR = 0x8,
6329 WMI_PEER_PARAM_FIXED_RATE = 0x9,
6330 WMI_PEER_DEBUG = 0xa,
6331 WMI_PEER_PHYMODE = 0xd,
6332 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */
6333};
6334
6335struct wmi_peer_set_param_cmd {
6336 __le32 vdev_id;
6337 struct wmi_mac_addr peer_macaddr;
6338 __le32 param_id;
6339 __le32 param_value;
6340} __packed;
6341
6342#define MAX_SUPPORTED_RATES 128
6343
6344struct wmi_rate_set {
6345 /* total number of rates */
6346 __le32 num_rates;
6347 /*
6348 * rates (each 8bit value) packed into a 32 bit word.
6349 * the rates are filled from least significant byte to most
6350 * significant byte.
6351 */
6352 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6353} __packed;
6354
6355struct wmi_rate_set_arg {
6356 unsigned int num_rates;
6357 u8 rates[MAX_SUPPORTED_RATES];
6358};
6359
6360/*
6361 * NOTE: It would bea good idea to represent the Tx MCS
6362 * info in one word and Rx in another word. This is split
6363 * into multiple words for convenience
6364 */
6365struct wmi_vht_rate_set {
6366 __le32 rx_max_rate; /* Max Rx data rate */
6367 __le32 rx_mcs_set; /* Negotiated RX VHT rates */
6368 __le32 tx_max_rate; /* Max Tx data rate */
6369 __le32 tx_mcs_set; /* Negotiated TX VHT rates */
6370} __packed;
6371
6372struct wmi_vht_rate_set_arg {
6373 u32 rx_max_rate;
6374 u32 rx_mcs_set;
6375 u32 tx_max_rate;
6376 u32 tx_mcs_set;
6377};
6378
6379struct wmi_peer_set_rates_cmd {
6380 /* peer MAC address */
6381 struct wmi_mac_addr peer_macaddr;
6382 /* legacy rate set */
6383 struct wmi_rate_set peer_legacy_rates;
6384 /* ht rate set */
6385 struct wmi_rate_set peer_ht_rates;
6386} __packed;
6387
6388struct wmi_peer_set_q_empty_callback_cmd {
6389 /* unique id identifying the VDEV, generated by the caller */
6390 __le32 vdev_id;
6391 /* peer MAC address */
6392 struct wmi_mac_addr peer_macaddr;
6393 __le32 callback_enable;
6394} __packed;
6395
6396struct wmi_peer_flags_map {
6397 u32 auth;
6398 u32 qos;
6399 u32 need_ptk_4_way;
6400 u32 need_gtk_2_way;
6401 u32 apsd;
6402 u32 ht;
6403 u32 bw40;
6404 u32 stbc;
6405 u32 ldbc;
6406 u32 dyn_mimops;
6407 u32 static_mimops;
6408 u32 spatial_mux;
6409 u32 vht;
6410 u32 bw80;
6411 u32 vht_2g;
6412 u32 pmf;
6413 u32 bw160;
6414};
6415
6416enum wmi_peer_flags {
6417 WMI_PEER_AUTH = 0x00000001,
6418 WMI_PEER_QOS = 0x00000002,
6419 WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6420 WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6421 WMI_PEER_APSD = 0x00000800,
6422 WMI_PEER_HT = 0x00001000,
6423 WMI_PEER_40MHZ = 0x00002000,
6424 WMI_PEER_STBC = 0x00008000,
6425 WMI_PEER_LDPC = 0x00010000,
6426 WMI_PEER_DYN_MIMOPS = 0x00020000,
6427 WMI_PEER_STATIC_MIMOPS = 0x00040000,
6428 WMI_PEER_SPATIAL_MUX = 0x00200000,
6429 WMI_PEER_VHT = 0x02000000,
6430 WMI_PEER_80MHZ = 0x04000000,
6431 WMI_PEER_VHT_2G = 0x08000000,
6432 WMI_PEER_PMF = 0x10000000,
6433 WMI_PEER_160MHZ = 0x20000000
6434};
6435
6436enum wmi_10x_peer_flags {
6437 WMI_10X_PEER_AUTH = 0x00000001,
6438 WMI_10X_PEER_QOS = 0x00000002,
6439 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6440 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6441 WMI_10X_PEER_APSD = 0x00000800,
6442 WMI_10X_PEER_HT = 0x00001000,
6443 WMI_10X_PEER_40MHZ = 0x00002000,
6444 WMI_10X_PEER_STBC = 0x00008000,
6445 WMI_10X_PEER_LDPC = 0x00010000,
6446 WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6447 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6448 WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6449 WMI_10X_PEER_VHT = 0x02000000,
6450 WMI_10X_PEER_80MHZ = 0x04000000,
6451 WMI_10X_PEER_160MHZ = 0x20000000
6452};
6453
6454enum wmi_10_2_peer_flags {
6455 WMI_10_2_PEER_AUTH = 0x00000001,
6456 WMI_10_2_PEER_QOS = 0x00000002,
6457 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6458 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6459 WMI_10_2_PEER_APSD = 0x00000800,
6460 WMI_10_2_PEER_HT = 0x00001000,
6461 WMI_10_2_PEER_40MHZ = 0x00002000,
6462 WMI_10_2_PEER_STBC = 0x00008000,
6463 WMI_10_2_PEER_LDPC = 0x00010000,
6464 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6465 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6466 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6467 WMI_10_2_PEER_VHT = 0x02000000,
6468 WMI_10_2_PEER_80MHZ = 0x04000000,
6469 WMI_10_2_PEER_VHT_2G = 0x08000000,
6470 WMI_10_2_PEER_PMF = 0x10000000,
6471 WMI_10_2_PEER_160MHZ = 0x20000000
6472};
6473
6474/*
6475 * Peer rate capabilities.
6476 *
6477 * This is of interest to the ratecontrol
6478 * module which resides in the firmware. The bit definitions are
6479 * consistent with that defined in if_athrate.c.
6480 */
6481#define WMI_RC_DS_FLAG 0x01
6482#define WMI_RC_CW40_FLAG 0x02
6483#define WMI_RC_SGI_FLAG 0x04
6484#define WMI_RC_HT_FLAG 0x08
6485#define WMI_RC_RTSCTS_FLAG 0x10
6486#define WMI_RC_TX_STBC_FLAG 0x20
6487#define WMI_RC_RX_STBC_FLAG 0xC0
6488#define WMI_RC_RX_STBC_FLAG_S 6
6489#define WMI_RC_WEP_TKIP_FLAG 0x100
6490#define WMI_RC_TS_FLAG 0x200
6491#define WMI_RC_UAPSD_FLAG 0x400
6492
6493/* Maximum listen interval supported by hw in units of beacon interval */
6494#define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6495
6496struct wmi_common_peer_assoc_complete_cmd {
6497 struct wmi_mac_addr peer_macaddr;
6498 __le32 vdev_id;
6499 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6500 __le32 peer_associd; /* 16 LSBs */
6501 __le32 peer_flags;
6502 __le32 peer_caps; /* 16 LSBs */
6503 __le32 peer_listen_intval;
6504 __le32 peer_ht_caps;
6505 __le32 peer_max_mpdu;
6506 __le32 peer_mpdu_density; /* 0..16 */
6507 __le32 peer_rate_caps;
6508 struct wmi_rate_set peer_legacy_rates;
6509 struct wmi_rate_set peer_ht_rates;
6510 __le32 peer_nss; /* num of spatial streams */
6511 __le32 peer_vht_caps;
6512 __le32 peer_phymode;
6513 struct wmi_vht_rate_set peer_vht_rates;
6514};
6515
6516struct wmi_main_peer_assoc_complete_cmd {
6517 struct wmi_common_peer_assoc_complete_cmd cmd;
6518
6519 /* HT Operation Element of the peer. Five bytes packed in 2
6520 * INT32 array and filled from lsb to msb.
6521 */
6522 __le32 peer_ht_info[2];
6523} __packed;
6524
6525struct wmi_10_1_peer_assoc_complete_cmd {
6526 struct wmi_common_peer_assoc_complete_cmd cmd;
6527} __packed;
6528
6529#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6530#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6531#define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6532#define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6533
6534struct wmi_10_2_peer_assoc_complete_cmd {
6535 struct wmi_common_peer_assoc_complete_cmd cmd;
6536 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6537} __packed;
6538
6539/* NSS Mapping to FW */
6540#define WMI_PEER_NSS_MAP_ENABLE BIT(31)
6541#define WMI_PEER_NSS_160MHZ_MASK GENMASK(2, 0)
6542#define WMI_PEER_NSS_80_80MHZ_MASK GENMASK(5, 3)
6543
6544struct wmi_10_4_peer_assoc_complete_cmd {
6545 struct wmi_10_2_peer_assoc_complete_cmd cmd;
6546 __le32 peer_bw_rxnss_override;
6547} __packed;
6548
6549struct wmi_peer_assoc_complete_arg {
6550 u8 addr[ETH_ALEN];
6551 u32 vdev_id;
6552 bool peer_reassoc;
6553 u16 peer_aid;
6554 u32 peer_flags; /* see %WMI_PEER_ */
6555 u16 peer_caps;
6556 u32 peer_listen_intval;
6557 u32 peer_ht_caps;
6558 u32 peer_max_mpdu;
6559 u32 peer_mpdu_density; /* 0..16 */
6560 u32 peer_rate_caps; /* see %WMI_RC_ */
6561 struct wmi_rate_set_arg peer_legacy_rates;
6562 struct wmi_rate_set_arg peer_ht_rates;
6563 u32 peer_num_spatial_streams;
6564 u32 peer_vht_caps;
6565 enum wmi_phy_mode peer_phymode;
6566 struct wmi_vht_rate_set_arg peer_vht_rates;
6567 u32 peer_bw_rxnss_override;
6568};
6569
6570struct wmi_peer_add_wds_entry_cmd {
6571 /* peer MAC address */
6572 struct wmi_mac_addr peer_macaddr;
6573 /* wds MAC addr */
6574 struct wmi_mac_addr wds_macaddr;
6575} __packed;
6576
6577struct wmi_peer_remove_wds_entry_cmd {
6578 /* wds MAC addr */
6579 struct wmi_mac_addr wds_macaddr;
6580} __packed;
6581
6582struct wmi_peer_q_empty_callback_event {
6583 /* peer MAC address */
6584 struct wmi_mac_addr peer_macaddr;
6585} __packed;
6586
6587/*
6588 * Channel info WMI event
6589 */
6590struct wmi_chan_info_event {
6591 __le32 err_code;
6592 __le32 freq;
6593 __le32 cmd_flags;
6594 __le32 noise_floor;
6595 __le32 rx_clear_count;
6596 __le32 cycle_count;
6597} __packed;
6598
6599struct wmi_10_4_chan_info_event {
6600 __le32 err_code;
6601 __le32 freq;
6602 __le32 cmd_flags;
6603 __le32 noise_floor;
6604 __le32 rx_clear_count;
6605 __le32 cycle_count;
6606 __le32 chan_tx_pwr_range;
6607 __le32 chan_tx_pwr_tp;
6608 __le32 rx_frame_count;
6609} __packed;
6610
6611struct wmi_peer_sta_kickout_event {
6612 struct wmi_mac_addr peer_macaddr;
6613} __packed;
6614
6615#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6616#define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6617
6618/* Beacon filter wmi command info */
6619#define BCN_FLT_MAX_SUPPORTED_IES 256
6620#define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
6621
6622struct bss_bcn_stats {
6623 __le32 vdev_id;
6624 __le32 bss_bcnsdropped;
6625 __le32 bss_bcnsdelivered;
6626} __packed;
6627
6628struct bcn_filter_stats {
6629 __le32 bcns_dropped;
6630 __le32 bcns_delivered;
6631 __le32 activefilters;
6632 struct bss_bcn_stats bss_stats;
6633} __packed;
6634
6635struct wmi_add_bcn_filter_cmd {
6636 u32 vdev_id;
6637 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6638} __packed;
6639
6640enum wmi_sta_keepalive_method {
6641 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6642 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6643};
6644
6645#define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6646
6647/* Firmware crashes if keepalive interval exceeds this limit */
6648#define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6649
6650/* note: ip4 addresses are in network byte order, i.e. big endian */
6651struct wmi_sta_keepalive_arp_resp {
6652 __be32 src_ip4_addr;
6653 __be32 dest_ip4_addr;
6654 struct wmi_mac_addr dest_mac_addr;
6655} __packed;
6656
6657struct wmi_sta_keepalive_cmd {
6658 __le32 vdev_id;
6659 __le32 enabled;
6660 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6661 __le32 interval; /* in seconds */
6662 struct wmi_sta_keepalive_arp_resp arp_resp;
6663} __packed;
6664
6665struct wmi_sta_keepalive_arg {
6666 u32 vdev_id;
6667 u32 enabled;
6668 u32 method;
6669 u32 interval;
6670 __be32 src_ip4_addr;
6671 __be32 dest_ip4_addr;
6672 const u8 dest_mac_addr[ETH_ALEN];
6673};
6674
6675enum wmi_force_fw_hang_type {
6676 WMI_FORCE_FW_HANG_ASSERT = 1,
6677 WMI_FORCE_FW_HANG_NO_DETECT,
6678 WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6679 WMI_FORCE_FW_HANG_EMPTY_POINT,
6680 WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6681 WMI_FORCE_FW_HANG_INFINITE_LOOP,
6682};
6683
6684#define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6685
6686struct wmi_force_fw_hang_cmd {
6687 __le32 type;
6688 __le32 delay_ms;
6689} __packed;
6690
6691enum wmi_pdev_reset_mode_type {
6692 WMI_RST_MODE_TX_FLUSH = 1,
6693 WMI_RST_MODE_WARM_RESET,
6694 WMI_RST_MODE_COLD_RESET,
6695 WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6696 WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6697 WMI_RST_MODE_MAX,
6698};
6699
6700enum ath10k_dbglog_level {
6701 ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6702 ATH10K_DBGLOG_LEVEL_INFO = 1,
6703 ATH10K_DBGLOG_LEVEL_WARN = 2,
6704 ATH10K_DBGLOG_LEVEL_ERR = 3,
6705};
6706
6707/* VAP ids to enable dbglog */
6708#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
6709#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
6710
6711/* to enable dbglog in the firmware */
6712#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
6713#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6714
6715/* timestamp resolution */
6716#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
6717#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
6718
6719/* number of queued messages before sending them to the host */
6720#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
6721#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
6722
6723/*
6724 * Log levels to enable. This defines the minimum level to enable, this is
6725 * not a bitmask. See enum ath10k_dbglog_level for the values.
6726 */
6727#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
6728#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
6729
6730/*
6731 * Note: this is a cleaned up version of a struct firmware uses. For
6732 * example, config_valid was hidden inside an array.
6733 */
6734struct wmi_dbglog_cfg_cmd {
6735 /* bitmask to hold mod id config*/
6736 __le32 module_enable;
6737
6738 /* see ATH10K_DBGLOG_CFG_ */
6739 __le32 config_enable;
6740
6741 /* mask of module id bits to be changed */
6742 __le32 module_valid;
6743
6744 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6745 __le32 config_valid;
6746} __packed;
6747
6748struct wmi_10_4_dbglog_cfg_cmd {
6749 /* bitmask to hold mod id config*/
6750 __le64 module_enable;
6751
6752 /* see ATH10K_DBGLOG_CFG_ */
6753 __le32 config_enable;
6754
6755 /* mask of module id bits to be changed */
6756 __le64 module_valid;
6757
6758 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6759 __le32 config_valid;
6760} __packed;
6761
6762enum wmi_roam_reason {
6763 WMI_ROAM_REASON_BETTER_AP = 1,
6764 WMI_ROAM_REASON_BEACON_MISS = 2,
6765 WMI_ROAM_REASON_LOW_RSSI = 3,
6766 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6767 WMI_ROAM_REASON_HO_FAILED = 5,
6768
6769 /* keep last */
6770 WMI_ROAM_REASON_MAX,
6771};
6772
6773struct wmi_roam_ev {
6774 __le32 vdev_id;
6775 __le32 reason;
6776} __packed;
6777
6778#define ATH10K_FRAGMT_THRESHOLD_MIN 540
6779#define ATH10K_FRAGMT_THRESHOLD_MAX 2346
6780
6781#define WMI_MAX_EVENT 0x1000
6782/* Maximum number of pending TXed WMI packets */
6783#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6784
6785/* By default disable power save for IBSS */
6786#define ATH10K_DEFAULT_ATIM 0
6787
6788#define WMI_MAX_MEM_REQS 16
6789
6790struct wmi_scan_ev_arg {
6791 __le32 event_type; /* %WMI_SCAN_EVENT_ */
6792 __le32 reason; /* %WMI_SCAN_REASON_ */
6793 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6794 __le32 scan_req_id;
6795 __le32 scan_id;
6796 __le32 vdev_id;
6797};
6798
6799struct mgmt_tx_compl_params {
6800 u32 desc_id;
6801 u32 status;
6802 u32 ppdu_id;
6803 int ack_rssi;
6804};
6805
6806struct wmi_tlv_mgmt_tx_compl_ev_arg {
6807 __le32 desc_id;
6808 __le32 status;
6809 __le32 pdev_id;
6810 __le32 ppdu_id;
6811 __le32 ack_rssi;
6812};
6813
6814struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6815 __le32 num_reports;
6816 const __le32 *desc_ids;
6817 const __le32 *status;
6818 const __le32 *ppdu_ids;
6819 const __le32 *ack_rssi;
6820};
6821
6822struct wmi_peer_delete_resp_ev_arg {
6823 __le32 vdev_id;
6824 struct wmi_mac_addr peer_addr;
6825};
6826
6827#define WMI_MGMT_RX_NUM_RSSI 4
6828struct wmi_mgmt_rx_ev_arg {
6829 __le32 channel;
6830 __le32 snr;
6831 __le32 rate;
6832 __le32 phy_mode;
6833 __le32 buf_len;
6834 __le32 status; /* %WMI_RX_STATUS_ */
6835 struct wmi_mgmt_rx_ext_info ext_info;
6836 __le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6837};
6838
6839struct wmi_ch_info_ev_arg {
6840 __le32 err_code;
6841 __le32 freq;
6842 __le32 cmd_flags;
6843 __le32 noise_floor;
6844 __le32 rx_clear_count;
6845 __le32 cycle_count;
6846 __le32 chan_tx_pwr_range;
6847 __le32 chan_tx_pwr_tp;
6848 __le32 rx_frame_count;
6849 __le32 my_bss_rx_cycle_count;
6850 __le32 rx_11b_mode_data_duration;
6851 __le32 tx_frame_cnt;
6852 __le32 mac_clk_mhz;
6853};
6854
6855/* From 10.4 firmware, not sure all have the same values. */
6856enum wmi_vdev_start_status {
6857 WMI_VDEV_START_OK = 0,
6858 WMI_VDEV_START_CHAN_INVALID,
6859};
6860
6861struct wmi_vdev_start_ev_arg {
6862 __le32 vdev_id;
6863 __le32 req_id;
6864 __le32 resp_type; /* %WMI_VDEV_RESP_ */
6865 __le32 status; /* See wmi_vdev_start_status enum above */
6866};
6867
6868struct wmi_peer_kick_ev_arg {
6869 const u8 *mac_addr;
6870};
6871
6872struct wmi_swba_ev_arg {
6873 __le32 vdev_map;
6874 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6875 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6876};
6877
6878struct wmi_phyerr_ev_arg {
6879 u32 tsf_timestamp;
6880 u16 freq1;
6881 u16 freq2;
6882 u8 rssi_combined;
6883 u8 chan_width_mhz;
6884 u8 phy_err_code;
6885 u16 nf_chains[4];
6886 u32 buf_len;
6887 const u8 *buf;
6888 u8 hdr_len;
6889};
6890
6891struct wmi_phyerr_hdr_arg {
6892 u32 num_phyerrs;
6893 u32 tsf_l32;
6894 u32 tsf_u32;
6895 u32 buf_len;
6896 const void *phyerrs;
6897};
6898
6899struct wmi_dfs_status_ev_arg {
6900 u32 status;
6901};
6902
6903struct wmi_svc_rdy_ev_arg {
6904 __le32 min_tx_power;
6905 __le32 max_tx_power;
6906 __le32 ht_cap;
6907 __le32 vht_cap;
6908 __le32 vht_supp_mcs;
6909 __le32 sw_ver0;
6910 __le32 sw_ver1;
6911 __le32 fw_build;
6912 __le32 phy_capab;
6913 __le32 num_rf_chains;
6914 __le32 eeprom_rd;
6915 __le32 num_mem_reqs;
6916 __le32 low_2ghz_chan;
6917 __le32 high_2ghz_chan;
6918 __le32 low_5ghz_chan;
6919 __le32 high_5ghz_chan;
6920 __le32 sys_cap_info;
6921 const __le32 *service_map;
6922 size_t service_map_len;
6923 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6924};
6925
6926struct wmi_svc_avail_ev_arg {
6927 bool service_map_ext_valid;
6928 __le32 service_map_ext_len;
6929 const __le32 *service_map_ext;
6930};
6931
6932struct wmi_rdy_ev_arg {
6933 __le32 sw_version;
6934 __le32 abi_version;
6935 __le32 status;
6936 const u8 *mac_addr;
6937};
6938
6939struct wmi_roam_ev_arg {
6940 __le32 vdev_id;
6941 __le32 reason;
6942 __le32 rssi;
6943};
6944
6945struct wmi_echo_ev_arg {
6946 __le32 value;
6947};
6948
6949struct wmi_pdev_temperature_event {
6950 /* temperature value in Celsius degree */
6951 __le32 temperature;
6952} __packed;
6953
6954struct wmi_pdev_bss_chan_info_event {
6955 __le32 freq;
6956 __le32 noise_floor;
6957 __le64 cycle_busy;
6958 __le64 cycle_total;
6959 __le64 cycle_tx;
6960 __le64 cycle_rx;
6961 __le64 cycle_rx_bss;
6962 __le32 reserved;
6963} __packed;
6964
6965/* WOW structures */
6966enum wmi_wow_wakeup_event {
6967 WOW_BMISS_EVENT = 0,
6968 WOW_BETTER_AP_EVENT,
6969 WOW_DEAUTH_RECVD_EVENT,
6970 WOW_MAGIC_PKT_RECVD_EVENT,
6971 WOW_GTK_ERR_EVENT,
6972 WOW_FOURWAY_HSHAKE_EVENT,
6973 WOW_EAPOL_RECVD_EVENT,
6974 WOW_NLO_DETECTED_EVENT,
6975 WOW_DISASSOC_RECVD_EVENT,
6976 WOW_PATTERN_MATCH_EVENT,
6977 WOW_CSA_IE_EVENT,
6978 WOW_PROBE_REQ_WPS_IE_EVENT,
6979 WOW_AUTH_REQ_EVENT,
6980 WOW_ASSOC_REQ_EVENT,
6981 WOW_HTT_EVENT,
6982 WOW_RA_MATCH_EVENT,
6983 WOW_HOST_AUTO_SHUTDOWN_EVENT,
6984 WOW_IOAC_MAGIC_EVENT,
6985 WOW_IOAC_SHORT_EVENT,
6986 WOW_IOAC_EXTEND_EVENT,
6987 WOW_IOAC_TIMER_EVENT,
6988 WOW_DFS_PHYERR_RADAR_EVENT,
6989 WOW_BEACON_EVENT,
6990 WOW_CLIENT_KICKOUT_EVENT,
6991 WOW_EVENT_MAX,
6992};
6993
6994#define C2S(x) case x: return #x
6995
6996static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6997{
6998 switch (ev) {
6999 C2S(WOW_BMISS_EVENT);
7000 C2S(WOW_BETTER_AP_EVENT);
7001 C2S(WOW_DEAUTH_RECVD_EVENT);
7002 C2S(WOW_MAGIC_PKT_RECVD_EVENT);
7003 C2S(WOW_GTK_ERR_EVENT);
7004 C2S(WOW_FOURWAY_HSHAKE_EVENT);
7005 C2S(WOW_EAPOL_RECVD_EVENT);
7006 C2S(WOW_NLO_DETECTED_EVENT);
7007 C2S(WOW_DISASSOC_RECVD_EVENT);
7008 C2S(WOW_PATTERN_MATCH_EVENT);
7009 C2S(WOW_CSA_IE_EVENT);
7010 C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
7011 C2S(WOW_AUTH_REQ_EVENT);
7012 C2S(WOW_ASSOC_REQ_EVENT);
7013 C2S(WOW_HTT_EVENT);
7014 C2S(WOW_RA_MATCH_EVENT);
7015 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
7016 C2S(WOW_IOAC_MAGIC_EVENT);
7017 C2S(WOW_IOAC_SHORT_EVENT);
7018 C2S(WOW_IOAC_EXTEND_EVENT);
7019 C2S(WOW_IOAC_TIMER_EVENT);
7020 C2S(WOW_DFS_PHYERR_RADAR_EVENT);
7021 C2S(WOW_BEACON_EVENT);
7022 C2S(WOW_CLIENT_KICKOUT_EVENT);
7023 C2S(WOW_EVENT_MAX);
7024 default:
7025 return NULL;
7026 }
7027}
7028
7029enum wmi_wow_wake_reason {
7030 WOW_REASON_UNSPECIFIED = -1,
7031 WOW_REASON_NLOD = 0,
7032 WOW_REASON_AP_ASSOC_LOST,
7033 WOW_REASON_LOW_RSSI,
7034 WOW_REASON_DEAUTH_RECVD,
7035 WOW_REASON_DISASSOC_RECVD,
7036 WOW_REASON_GTK_HS_ERR,
7037 WOW_REASON_EAP_REQ,
7038 WOW_REASON_FOURWAY_HS_RECV,
7039 WOW_REASON_TIMER_INTR_RECV,
7040 WOW_REASON_PATTERN_MATCH_FOUND,
7041 WOW_REASON_RECV_MAGIC_PATTERN,
7042 WOW_REASON_P2P_DISC,
7043 WOW_REASON_WLAN_HB,
7044 WOW_REASON_CSA_EVENT,
7045 WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7046 WOW_REASON_AUTH_REQ_RECV,
7047 WOW_REASON_ASSOC_REQ_RECV,
7048 WOW_REASON_HTT_EVENT,
7049 WOW_REASON_RA_MATCH,
7050 WOW_REASON_HOST_AUTO_SHUTDOWN,
7051 WOW_REASON_IOAC_MAGIC_EVENT,
7052 WOW_REASON_IOAC_SHORT_EVENT,
7053 WOW_REASON_IOAC_EXTEND_EVENT,
7054 WOW_REASON_IOAC_TIMER_EVENT,
7055 WOW_REASON_ROAM_HO,
7056 WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7057 WOW_REASON_BEACON_RECV,
7058 WOW_REASON_CLIENT_KICKOUT_EVENT,
7059 WOW_REASON_DEBUG_TEST = 0xFF,
7060};
7061
7062static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7063{
7064 switch (reason) {
7065 C2S(WOW_REASON_UNSPECIFIED);
7066 C2S(WOW_REASON_NLOD);
7067 C2S(WOW_REASON_AP_ASSOC_LOST);
7068 C2S(WOW_REASON_LOW_RSSI);
7069 C2S(WOW_REASON_DEAUTH_RECVD);
7070 C2S(WOW_REASON_DISASSOC_RECVD);
7071 C2S(WOW_REASON_GTK_HS_ERR);
7072 C2S(WOW_REASON_EAP_REQ);
7073 C2S(WOW_REASON_FOURWAY_HS_RECV);
7074 C2S(WOW_REASON_TIMER_INTR_RECV);
7075 C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7076 C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7077 C2S(WOW_REASON_P2P_DISC);
7078 C2S(WOW_REASON_WLAN_HB);
7079 C2S(WOW_REASON_CSA_EVENT);
7080 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7081 C2S(WOW_REASON_AUTH_REQ_RECV);
7082 C2S(WOW_REASON_ASSOC_REQ_RECV);
7083 C2S(WOW_REASON_HTT_EVENT);
7084 C2S(WOW_REASON_RA_MATCH);
7085 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7086 C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7087 C2S(WOW_REASON_IOAC_SHORT_EVENT);
7088 C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7089 C2S(WOW_REASON_IOAC_TIMER_EVENT);
7090 C2S(WOW_REASON_ROAM_HO);
7091 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7092 C2S(WOW_REASON_BEACON_RECV);
7093 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7094 C2S(WOW_REASON_DEBUG_TEST);
7095 default:
7096 return NULL;
7097 }
7098}
7099
7100#undef C2S
7101
7102struct wmi_wow_ev_arg {
7103 u32 vdev_id;
7104 u32 flag;
7105 enum wmi_wow_wake_reason wake_reason;
7106 u32 data_len;
7107};
7108
7109#define WOW_MIN_PATTERN_SIZE 1
7110#define WOW_MAX_PATTERN_SIZE 148
7111#define WOW_MAX_PKT_OFFSET 128
7112#define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \
7113 sizeof(struct rfc1042_hdr))
7114#define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \
7115 offsetof(struct ieee80211_hdr_3addr, addr1))
7116
7117enum wmi_tdls_state {
7118 WMI_TDLS_DISABLE,
7119 WMI_TDLS_ENABLE_PASSIVE,
7120 WMI_TDLS_ENABLE_ACTIVE,
7121 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7122};
7123
7124enum wmi_tdls_peer_state {
7125 WMI_TDLS_PEER_STATE_PEERING,
7126 WMI_TDLS_PEER_STATE_CONNECTED,
7127 WMI_TDLS_PEER_STATE_TEARDOWN,
7128};
7129
7130struct wmi_tdls_peer_update_cmd_arg {
7131 u32 vdev_id;
7132 enum wmi_tdls_peer_state peer_state;
7133 u8 addr[ETH_ALEN];
7134};
7135
7136#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7137
7138#define WMI_TDLS_PEER_SP_MASK 0x60
7139#define WMI_TDLS_PEER_SP_LSB 5
7140
7141enum wmi_tdls_options {
7142 WMI_TDLS_OFFCHAN_EN = BIT(0),
7143 WMI_TDLS_BUFFER_STA_EN = BIT(1),
7144 WMI_TDLS_SLEEP_STA_EN = BIT(2),
7145};
7146
7147enum {
7148 WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7149 WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7150 WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7151 WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7152};
7153
7154struct wmi_tdls_peer_capab_arg {
7155 u8 peer_uapsd_queues;
7156 u8 peer_max_sp;
7157 u32 buff_sta_support;
7158 u32 off_chan_support;
7159 u32 peer_curr_operclass;
7160 u32 self_curr_operclass;
7161 u32 peer_chan_len;
7162 u32 peer_operclass_len;
7163 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7164 u32 is_peer_responder;
7165 u32 pref_offchan_num;
7166 u32 pref_offchan_bw;
7167};
7168
7169struct wmi_10_4_tdls_set_state_cmd {
7170 __le32 vdev_id;
7171 __le32 state;
7172 __le32 notification_interval_ms;
7173 __le32 tx_discovery_threshold;
7174 __le32 tx_teardown_threshold;
7175 __le32 rssi_teardown_threshold;
7176 __le32 rssi_delta;
7177 __le32 tdls_options;
7178 __le32 tdls_peer_traffic_ind_window;
7179 __le32 tdls_peer_traffic_response_timeout_ms;
7180 __le32 tdls_puapsd_mask;
7181 __le32 tdls_puapsd_inactivity_time_ms;
7182 __le32 tdls_puapsd_rx_frame_threshold;
7183 __le32 teardown_notification_ms;
7184 __le32 tdls_peer_kickout_threshold;
7185} __packed;
7186
7187struct wmi_tdls_peer_capabilities {
7188 __le32 peer_qos;
7189 __le32 buff_sta_support;
7190 __le32 off_chan_support;
7191 __le32 peer_curr_operclass;
7192 __le32 self_curr_operclass;
7193 __le32 peer_chan_len;
7194 __le32 peer_operclass_len;
7195 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7196 __le32 is_peer_responder;
7197 __le32 pref_offchan_num;
7198 __le32 pref_offchan_bw;
7199 struct wmi_channel peer_chan_list[1];
7200} __packed;
7201
7202struct wmi_10_4_tdls_peer_update_cmd {
7203 __le32 vdev_id;
7204 struct wmi_mac_addr peer_macaddr;
7205 __le32 peer_state;
7206 __le32 reserved[4];
7207 struct wmi_tdls_peer_capabilities peer_capab;
7208} __packed;
7209
7210enum wmi_tdls_peer_reason {
7211 WMI_TDLS_TEARDOWN_REASON_TX,
7212 WMI_TDLS_TEARDOWN_REASON_RSSI,
7213 WMI_TDLS_TEARDOWN_REASON_SCAN,
7214 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7215 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7216 WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7217 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7218 WMI_TDLS_ENTER_BUF_STA,
7219 WMI_TDLS_EXIT_BUF_STA,
7220 WMI_TDLS_ENTER_BT_BUSY_MODE,
7221 WMI_TDLS_EXIT_BT_BUSY_MODE,
7222 WMI_TDLS_SCAN_STARTED_EVENT,
7223 WMI_TDLS_SCAN_COMPLETED_EVENT,
7224};
7225
7226enum wmi_tdls_peer_notification {
7227 WMI_TDLS_SHOULD_DISCOVER,
7228 WMI_TDLS_SHOULD_TEARDOWN,
7229 WMI_TDLS_PEER_DISCONNECTED,
7230 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7231};
7232
7233struct wmi_tdls_peer_event {
7234 struct wmi_mac_addr peer_macaddr;
7235 /* see enum wmi_tdls_peer_notification*/
7236 __le32 peer_status;
7237 /* see enum wmi_tdls_peer_reason */
7238 __le32 peer_reason;
7239 __le32 vdev_id;
7240} __packed;
7241
7242enum wmi_tid_aggr_control_conf {
7243 WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7244 WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7245 WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7246};
7247
7248enum wmi_noack_tid_conf {
7249 WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7250 WMI_PEER_TID_CONFIG_ACK,
7251 WMI_PEER_TID_CONFIG_NOACK,
7252};
7253
7254enum wmi_tid_rate_ctrl_conf {
7255 WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7256 WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7257 WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7258 WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7259 WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7260};
7261
7262enum wmi_tid_rtscts_control_conf {
7263 WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7264 WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7265};
7266
7267enum wmi_ext_tid_config_map {
7268 WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7269};
7270
7271struct wmi_per_peer_per_tid_cfg_arg {
7272 u32 vdev_id;
7273 struct wmi_mac_addr peer_macaddr;
7274 u32 tid;
7275 enum wmi_noack_tid_conf ack_policy;
7276 enum wmi_tid_aggr_control_conf aggr_control;
7277 u8 rate_ctrl;
7278 u32 retry_count;
7279 u32 rcode_flags;
7280 u32 ext_tid_cfg_bitmap;
7281 u32 rtscts_ctrl;
7282};
7283
7284struct wmi_peer_per_tid_cfg_cmd {
7285 __le32 vdev_id;
7286 struct wmi_mac_addr peer_macaddr;
7287 __le32 tid;
7288
7289 /* see enum wmi_noack_tid_conf */
7290 __le32 ack_policy;
7291
7292 /* see enum wmi_tid_aggr_control_conf */
7293 __le32 aggr_control;
7294
7295 /* see enum wmi_tid_rate_ctrl_conf */
7296 __le32 rate_control;
7297 __le32 rcode_flags;
7298 __le32 retry_count;
7299
7300 /* See enum wmi_ext_tid_config_map */
7301 __le32 ext_tid_cfg_bitmap;
7302
7303 /* see enum wmi_tid_rtscts_control_conf */
7304 __le32 rtscts_ctrl;
7305} __packed;
7306
7307enum wmi_txbf_conf {
7308 WMI_TXBF_CONF_UNSUPPORTED,
7309 WMI_TXBF_CONF_BEFORE_ASSOC,
7310 WMI_TXBF_CONF_AFTER_ASSOC,
7311};
7312
7313#define WMI_CCA_DETECT_LEVEL_AUTO 0
7314#define WMI_CCA_DETECT_MARGIN_AUTO 0
7315
7316struct wmi_pdev_set_adaptive_cca_params {
7317 __le32 enable;
7318 __le32 cca_detect_level;
7319 __le32 cca_detect_margin;
7320} __packed;
7321
7322#define WMI_PNO_MAX_SCHED_SCAN_PLANS 2
7323#define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200
7324#define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7325#define WMI_PNO_MAX_NETW_CHANNELS 26
7326#define WMI_PNO_MAX_NETW_CHANNELS_EX 60
7327#define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID
7328#define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN
7329
7330/*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7331#define WMI_PNO_MAX_PB_REQ_SIZE 450
7332
7333#define WMI_PNO_24G_DEFAULT_CH 1
7334#define WMI_PNO_5G_DEFAULT_CH 36
7335
7336#define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7337#define WMI_PASSIVE_MAX_CHANNEL_TIME 110
7338
7339/* SSID broadcast type */
7340enum wmi_SSID_bcast_type {
7341 BCAST_UNKNOWN = 0,
7342 BCAST_NORMAL = 1,
7343 BCAST_HIDDEN = 2,
7344};
7345
7346struct wmi_network_type {
7347 struct wmi_ssid ssid;
7348 u32 authentication;
7349 u32 encryption;
7350 u32 bcast_nw_type;
7351 u8 channel_count;
7352 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7353 s32 rssi_threshold;
7354} __packed;
7355
7356struct wmi_pno_scan_req {
7357 u8 enable;
7358 u8 vdev_id;
7359 u8 uc_networks_count;
7360 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7361 u32 fast_scan_period;
7362 u32 slow_scan_period;
7363 u8 fast_scan_max_cycles;
7364
7365 bool do_passive_scan;
7366
7367 u32 delay_start_time;
7368 u32 active_min_time;
7369 u32 active_max_time;
7370 u32 passive_min_time;
7371 u32 passive_max_time;
7372
7373 /* mac address randomization attributes */
7374 u32 enable_pno_scan_randomization;
7375 u8 mac_addr[ETH_ALEN];
7376 u8 mac_addr_mask[ETH_ALEN];
7377} __packed;
7378
7379enum wmi_host_platform_type {
7380 WMI_HOST_PLATFORM_HIGH_PERF,
7381 WMI_HOST_PLATFORM_LOW_PERF,
7382};
7383
7384enum wmi_bss_survey_req_type {
7385 WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7386 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7387};
7388
7389struct wmi_pdev_chan_info_req_cmd {
7390 __le32 type;
7391 __le32 reserved;
7392} __packed;
7393
7394/* bb timing register configurations */
7395struct wmi_bb_timing_cfg_arg {
7396 /* Tx_end to pa off timing */
7397 u32 bb_tx_timing;
7398
7399 /* Tx_end to external pa off timing */
7400 u32 bb_xpa_timing;
7401};
7402
7403struct wmi_pdev_bb_timing_cfg_cmd {
7404 /* Tx_end to pa off timing */
7405 __le32 bb_tx_timing;
7406
7407 /* Tx_end to external pa off timing */
7408 __le32 bb_xpa_timing;
7409} __packed;
7410
7411struct ath10k;
7412struct ath10k_vif;
7413struct ath10k_fw_stats_pdev;
7414struct ath10k_fw_stats_peer;
7415struct ath10k_fw_stats;
7416
7417int ath10k_wmi_attach(struct ath10k *ar);
7418void ath10k_wmi_detach(struct ath10k *ar);
7419void ath10k_wmi_free_host_mem(struct ath10k *ar);
7420int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7421int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7422
7423struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7424int ath10k_wmi_connect(struct ath10k *ar);
7425
7426int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7427int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7428 u32 cmd_id);
7429void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7430
7431void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7432 struct ath10k_fw_stats_pdev *dst);
7433void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7434 struct ath10k_fw_stats_pdev *dst);
7435void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7436 struct ath10k_fw_stats_pdev *dst);
7437void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7438 struct ath10k_fw_stats_pdev *dst);
7439void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7440 struct ath10k_fw_stats_peer *dst);
7441void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7442 struct wmi_host_mem_chunks *chunks);
7443void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7444 const struct wmi_start_scan_arg *arg);
7445void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7446 const struct wmi_wmm_params_arg *arg);
7447void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7448 const struct wmi_channel_arg *arg);
7449int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7450
7451int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7452int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7453int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7454int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7455void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7456void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7457int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7458void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7459void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7460void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7461void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7462void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7463void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7464void ath10k_wmi_event_dfs(struct ath10k *ar,
7465 struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7466void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7467 struct wmi_phyerr_ev_arg *phyerr,
7468 u64 tsf);
7469void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7470void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7471void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7472void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7473void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7474void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7475void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7476 struct sk_buff *skb);
7477void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7478 struct sk_buff *skb);
7479void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7480void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7481void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7482void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7483void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7484void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7485 struct sk_buff *skb);
7486void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7487void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7488void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7489void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7490 struct sk_buff *skb);
7491void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7492void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7493void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7494void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7495int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7496void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7497int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7498 int left_len, struct wmi_phyerr_ev_arg *arg);
7499void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7500 struct ath10k_fw_stats *fw_stats,
7501 char *buf);
7502void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7503 struct ath10k_fw_stats *fw_stats,
7504 char *buf);
7505size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
7506size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
7507void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7508 struct ath10k_fw_stats *fw_stats,
7509 char *buf);
7510int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7511 enum wmi_vdev_subtype subtype);
7512int ath10k_wmi_barrier(struct ath10k *ar);
7513void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7514 u32 num_tx_chain);
7515void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7516
7517#endif /* _WMI_H_ */