Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0+
2/* Copyright (C) 2021 Maxlinear Corporation
3 * Copyright (C) 2020 Intel Corporation
4 *
5 * Drivers for Maxlinear Ethernet GPY
6 *
7 */
8
9#include <linux/module.h>
10#include <linux/bitfield.h>
11#include <linux/hwmon.h>
12#include <linux/mutex.h>
13#include <linux/phy.h>
14#include <linux/polynomial.h>
15#include <linux/netdevice.h>
16
17/* PHY ID */
18#define PHY_ID_GPYx15B_MASK 0xFFFFFFFC
19#define PHY_ID_GPY21xB_MASK 0xFFFFFFF9
20#define PHY_ID_GPY2xx 0x67C9DC00
21#define PHY_ID_GPY115B 0x67C9DF00
22#define PHY_ID_GPY115C 0x67C9DF10
23#define PHY_ID_GPY211B 0x67C9DE08
24#define PHY_ID_GPY211C 0x67C9DE10
25#define PHY_ID_GPY212B 0x67C9DE09
26#define PHY_ID_GPY212C 0x67C9DE20
27#define PHY_ID_GPY215B 0x67C9DF04
28#define PHY_ID_GPY215C 0x67C9DF20
29#define PHY_ID_GPY241B 0x67C9DE40
30#define PHY_ID_GPY241BM 0x67C9DE80
31#define PHY_ID_GPY245B 0x67C9DEC0
32
33#define PHY_CTL1 0x13
34#define PHY_CTL1_MDICD BIT(3)
35#define PHY_CTL1_MDIAB BIT(2)
36#define PHY_CTL1_AMDIX BIT(0)
37#define PHY_MIISTAT 0x18 /* MII state */
38#define PHY_IMASK 0x19 /* interrupt mask */
39#define PHY_ISTAT 0x1A /* interrupt status */
40#define PHY_FWV 0x1E /* firmware version */
41
42#define PHY_MIISTAT_SPD_MASK GENMASK(2, 0)
43#define PHY_MIISTAT_DPX BIT(3)
44#define PHY_MIISTAT_LS BIT(10)
45
46#define PHY_MIISTAT_SPD_10 0
47#define PHY_MIISTAT_SPD_100 1
48#define PHY_MIISTAT_SPD_1000 2
49#define PHY_MIISTAT_SPD_2500 4
50
51#define PHY_IMASK_WOL BIT(15) /* Wake-on-LAN */
52#define PHY_IMASK_ANC BIT(10) /* Auto-Neg complete */
53#define PHY_IMASK_ADSC BIT(5) /* Link auto-downspeed detect */
54#define PHY_IMASK_DXMC BIT(2) /* Duplex mode change */
55#define PHY_IMASK_LSPC BIT(1) /* Link speed change */
56#define PHY_IMASK_LSTC BIT(0) /* Link state change */
57#define PHY_IMASK_MASK (PHY_IMASK_LSTC | \
58 PHY_IMASK_LSPC | \
59 PHY_IMASK_DXMC | \
60 PHY_IMASK_ADSC | \
61 PHY_IMASK_ANC)
62
63#define PHY_FWV_REL_MASK BIT(15)
64#define PHY_FWV_MAJOR_MASK GENMASK(11, 8)
65#define PHY_FWV_MINOR_MASK GENMASK(7, 0)
66
67#define PHY_PMA_MGBT_POLARITY 0x82
68#define PHY_MDI_MDI_X_MASK GENMASK(1, 0)
69#define PHY_MDI_MDI_X_NORMAL 0x3
70#define PHY_MDI_MDI_X_AB 0x2
71#define PHY_MDI_MDI_X_CD 0x1
72#define PHY_MDI_MDI_X_CROSS 0x0
73
74/* SGMII */
75#define VSPEC1_SGMII_CTRL 0x08
76#define VSPEC1_SGMII_CTRL_ANEN BIT(12) /* Aneg enable */
77#define VSPEC1_SGMII_CTRL_ANRS BIT(9) /* Restart Aneg */
78#define VSPEC1_SGMII_ANEN_ANRS (VSPEC1_SGMII_CTRL_ANEN | \
79 VSPEC1_SGMII_CTRL_ANRS)
80
81/* Temperature sensor */
82#define VSPEC1_TEMP_STA 0x0E
83#define VSPEC1_TEMP_STA_DATA GENMASK(9, 0)
84
85/* Mailbox */
86#define VSPEC1_MBOX_DATA 0x5
87#define VSPEC1_MBOX_ADDRLO 0x6
88#define VSPEC1_MBOX_CMD 0x7
89#define VSPEC1_MBOX_CMD_ADDRHI GENMASK(7, 0)
90#define VSPEC1_MBOX_CMD_RD (0 << 8)
91#define VSPEC1_MBOX_CMD_READY BIT(15)
92
93/* WoL */
94#define VPSPEC2_WOL_CTL 0x0E06
95#define VPSPEC2_WOL_AD01 0x0E08
96#define VPSPEC2_WOL_AD23 0x0E09
97#define VPSPEC2_WOL_AD45 0x0E0A
98#define WOL_EN BIT(0)
99
100/* Internal registers, access via mbox */
101#define REG_GPIO0_OUT 0xd3ce00
102
103struct gpy_priv {
104 /* serialize mailbox acesses */
105 struct mutex mbox_lock;
106
107 u8 fw_major;
108 u8 fw_minor;
109};
110
111static const struct {
112 int major;
113 int minor;
114} ver_need_sgmii_reaneg[] = {
115 {7, 0x6D},
116 {8, 0x6D},
117 {9, 0x73},
118};
119
120#if IS_ENABLED(CONFIG_HWMON)
121/* The original translation formulae of the temperature (in degrees of Celsius)
122 * are as follows:
123 *
124 * T = -2.5761e-11*(N^4) + 9.7332e-8*(N^3) + -1.9165e-4*(N^2) +
125 * 3.0762e-1*(N^1) + -5.2156e1
126 *
127 * where [-52.156, 137.961]C and N = [0, 1023].
128 *
129 * They must be accordingly altered to be suitable for the integer arithmetics.
130 * The technique is called 'factor redistribution', which just makes sure the
131 * multiplications and divisions are made so to have a result of the operations
132 * within the integer numbers limit. In addition we need to translate the
133 * formulae to accept millidegrees of Celsius. Here what it looks like after
134 * the alterations:
135 *
136 * T = -25761e-12*(N^4) + 97332e-9*(N^3) + -191650e-6*(N^2) +
137 * 307620e-3*(N^1) + -52156
138 *
139 * where T = [-52156, 137961]mC and N = [0, 1023].
140 */
141static const struct polynomial poly_N_to_temp = {
142 .terms = {
143 {4, -25761, 1000, 1},
144 {3, 97332, 1000, 1},
145 {2, -191650, 1000, 1},
146 {1, 307620, 1000, 1},
147 {0, -52156, 1, 1}
148 }
149};
150
151static int gpy_hwmon_read(struct device *dev,
152 enum hwmon_sensor_types type,
153 u32 attr, int channel, long *value)
154{
155 struct phy_device *phydev = dev_get_drvdata(dev);
156 int ret;
157
158 ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_TEMP_STA);
159 if (ret < 0)
160 return ret;
161 if (!ret)
162 return -ENODATA;
163
164 *value = polynomial_calc(&poly_N_to_temp,
165 FIELD_GET(VSPEC1_TEMP_STA_DATA, ret));
166
167 return 0;
168}
169
170static umode_t gpy_hwmon_is_visible(const void *data,
171 enum hwmon_sensor_types type,
172 u32 attr, int channel)
173{
174 return 0444;
175}
176
177static const struct hwmon_channel_info *gpy_hwmon_info[] = {
178 HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
179 NULL
180};
181
182static const struct hwmon_ops gpy_hwmon_hwmon_ops = {
183 .is_visible = gpy_hwmon_is_visible,
184 .read = gpy_hwmon_read,
185};
186
187static const struct hwmon_chip_info gpy_hwmon_chip_info = {
188 .ops = &gpy_hwmon_hwmon_ops,
189 .info = gpy_hwmon_info,
190};
191
192static int gpy_hwmon_register(struct phy_device *phydev)
193{
194 struct device *dev = &phydev->mdio.dev;
195 struct device *hwmon_dev;
196 char *hwmon_name;
197
198 hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev));
199 if (IS_ERR(hwmon_name))
200 return PTR_ERR(hwmon_name);
201
202 hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name,
203 phydev,
204 &gpy_hwmon_chip_info,
205 NULL);
206
207 return PTR_ERR_OR_ZERO(hwmon_dev);
208}
209#else
210static int gpy_hwmon_register(struct phy_device *phydev)
211{
212 return 0;
213}
214#endif
215
216static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
217{
218 struct gpy_priv *priv = phydev->priv;
219 int val, ret;
220 u16 cmd;
221
222 mutex_lock(&priv->mbox_lock);
223
224 ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_MBOX_ADDRLO,
225 addr);
226 if (ret)
227 goto out;
228
229 cmd = VSPEC1_MBOX_CMD_RD;
230 cmd |= FIELD_PREP(VSPEC1_MBOX_CMD_ADDRHI, addr >> 16);
231
232 ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_MBOX_CMD, cmd);
233 if (ret)
234 goto out;
235
236 /* The mbox read is used in the interrupt workaround. It was observed
237 * that a read might take up to 2.5ms. This is also the time for which
238 * the interrupt line is stuck low. To be on the safe side, poll the
239 * ready bit for 10ms.
240 */
241 ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
242 VSPEC1_MBOX_CMD, val,
243 (val & VSPEC1_MBOX_CMD_READY),
244 500, 10000, false);
245 if (ret)
246 goto out;
247
248 ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_MBOX_DATA);
249
250out:
251 mutex_unlock(&priv->mbox_lock);
252 return ret;
253}
254
255static int gpy_config_init(struct phy_device *phydev)
256{
257 int ret;
258
259 /* Mask all interrupts */
260 ret = phy_write(phydev, PHY_IMASK, 0);
261 if (ret)
262 return ret;
263
264 /* Clear all pending interrupts */
265 ret = phy_read(phydev, PHY_ISTAT);
266 return ret < 0 ? ret : 0;
267}
268
269static bool gpy_has_broken_mdint(struct phy_device *phydev)
270{
271 /* At least these PHYs are known to have broken interrupt handling */
272 return phydev->drv->phy_id == PHY_ID_GPY215B ||
273 phydev->drv->phy_id == PHY_ID_GPY215C;
274}
275
276static int gpy_probe(struct phy_device *phydev)
277{
278 struct device *dev = &phydev->mdio.dev;
279 struct gpy_priv *priv;
280 int fw_version;
281 int ret;
282
283 if (!phydev->is_c45) {
284 ret = phy_get_c45_ids(phydev);
285 if (ret < 0)
286 return ret;
287 }
288
289 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
290 if (!priv)
291 return -ENOMEM;
292 phydev->priv = priv;
293 mutex_init(&priv->mbox_lock);
294
295 fw_version = phy_read(phydev, PHY_FWV);
296 if (fw_version < 0)
297 return fw_version;
298 priv->fw_major = FIELD_GET(PHY_FWV_MAJOR_MASK, fw_version);
299 priv->fw_minor = FIELD_GET(PHY_FWV_MINOR_MASK, fw_version);
300
301 ret = gpy_hwmon_register(phydev);
302 if (ret)
303 return ret;
304
305 /* Show GPY PHY FW version in dmesg */
306 phydev_info(phydev, "Firmware Version: %d.%d (0x%04X%s)\n",
307 priv->fw_major, priv->fw_minor, fw_version,
308 fw_version & PHY_FWV_REL_MASK ? "" : " test version");
309
310 return 0;
311}
312
313static bool gpy_sgmii_need_reaneg(struct phy_device *phydev)
314{
315 struct gpy_priv *priv = phydev->priv;
316 size_t i;
317
318 for (i = 0; i < ARRAY_SIZE(ver_need_sgmii_reaneg); i++) {
319 if (priv->fw_major != ver_need_sgmii_reaneg[i].major)
320 continue;
321 if (priv->fw_minor < ver_need_sgmii_reaneg[i].minor)
322 return true;
323 break;
324 }
325
326 return false;
327}
328
329static bool gpy_2500basex_chk(struct phy_device *phydev)
330{
331 int ret;
332
333 ret = phy_read(phydev, PHY_MIISTAT);
334 if (ret < 0) {
335 phydev_err(phydev, "Error: MDIO register access failed: %d\n",
336 ret);
337 return false;
338 }
339
340 if (!(ret & PHY_MIISTAT_LS) ||
341 FIELD_GET(PHY_MIISTAT_SPD_MASK, ret) != PHY_MIISTAT_SPD_2500)
342 return false;
343
344 phydev->speed = SPEED_2500;
345 phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
346 phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
347 VSPEC1_SGMII_CTRL_ANEN, 0);
348 return true;
349}
350
351static bool gpy_sgmii_aneg_en(struct phy_device *phydev)
352{
353 int ret;
354
355 ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL);
356 if (ret < 0) {
357 phydev_err(phydev, "Error: MMD register access failed: %d\n",
358 ret);
359 return true;
360 }
361
362 return (ret & VSPEC1_SGMII_CTRL_ANEN) ? true : false;
363}
364
365static int gpy_config_mdix(struct phy_device *phydev, u8 ctrl)
366{
367 int ret;
368 u16 val;
369
370 switch (ctrl) {
371 case ETH_TP_MDI_AUTO:
372 val = PHY_CTL1_AMDIX;
373 break;
374 case ETH_TP_MDI_X:
375 val = (PHY_CTL1_MDIAB | PHY_CTL1_MDICD);
376 break;
377 case ETH_TP_MDI:
378 val = 0;
379 break;
380 default:
381 return 0;
382 }
383
384 ret = phy_modify(phydev, PHY_CTL1, PHY_CTL1_AMDIX | PHY_CTL1_MDIAB |
385 PHY_CTL1_MDICD, val);
386 if (ret < 0)
387 return ret;
388
389 return genphy_c45_restart_aneg(phydev);
390}
391
392static int gpy_config_aneg(struct phy_device *phydev)
393{
394 bool changed = false;
395 u32 adv;
396 int ret;
397
398 if (phydev->autoneg == AUTONEG_DISABLE) {
399 /* Configure half duplex with genphy_setup_forced,
400 * because genphy_c45_pma_setup_forced does not support.
401 */
402 return phydev->duplex != DUPLEX_FULL
403 ? genphy_setup_forced(phydev)
404 : genphy_c45_pma_setup_forced(phydev);
405 }
406
407 ret = gpy_config_mdix(phydev, phydev->mdix_ctrl);
408 if (ret < 0)
409 return ret;
410
411 ret = genphy_c45_an_config_aneg(phydev);
412 if (ret < 0)
413 return ret;
414 if (ret > 0)
415 changed = true;
416
417 adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
418 ret = phy_modify_changed(phydev, MII_CTRL1000,
419 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
420 adv);
421 if (ret < 0)
422 return ret;
423 if (ret > 0)
424 changed = true;
425
426 ret = genphy_c45_check_and_restart_aneg(phydev, changed);
427 if (ret < 0)
428 return ret;
429
430 if (phydev->interface == PHY_INTERFACE_MODE_USXGMII ||
431 phydev->interface == PHY_INTERFACE_MODE_INTERNAL)
432 return 0;
433
434 /* No need to trigger re-ANEG if link speed is 2.5G or SGMII ANEG is
435 * disabled.
436 */
437 if (!gpy_sgmii_need_reaneg(phydev) || gpy_2500basex_chk(phydev) ||
438 !gpy_sgmii_aneg_en(phydev))
439 return 0;
440
441 /* There is a design constraint in GPY2xx device where SGMII AN is
442 * only triggered when there is change of speed. If, PHY link
443 * partner`s speed is still same even after PHY TPI is down and up
444 * again, SGMII AN is not triggered and hence no new in-band message
445 * from GPY to MAC side SGMII.
446 * This could cause an issue during power up, when PHY is up prior to
447 * MAC. At this condition, once MAC side SGMII is up, MAC side SGMII
448 * wouldn`t receive new in-band message from GPY with correct link
449 * status, speed and duplex info.
450 *
451 * 1) If PHY is already up and TPI link status is still down (such as
452 * hard reboot), TPI link status is polled for 4 seconds before
453 * retriggerring SGMII AN.
454 * 2) If PHY is already up and TPI link status is also up (such as soft
455 * reboot), polling of TPI link status is not needed and SGMII AN is
456 * immediately retriggered.
457 * 3) Other conditions such as PHY is down, speed change etc, skip
458 * retriggering SGMII AN. Note: in case of speed change, GPY FW will
459 * initiate SGMII AN.
460 */
461
462 if (phydev->state != PHY_UP)
463 return 0;
464
465 ret = phy_read_poll_timeout(phydev, MII_BMSR, ret, ret & BMSR_LSTATUS,
466 20000, 4000000, false);
467 if (ret == -ETIMEDOUT)
468 return 0;
469 else if (ret < 0)
470 return ret;
471
472 /* Trigger SGMII AN. */
473 return phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
474 VSPEC1_SGMII_CTRL_ANRS, VSPEC1_SGMII_CTRL_ANRS);
475}
476
477static int gpy_update_mdix(struct phy_device *phydev)
478{
479 int ret;
480
481 ret = phy_read(phydev, PHY_CTL1);
482 if (ret < 0)
483 return ret;
484
485 if (ret & PHY_CTL1_AMDIX)
486 phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
487 else
488 if (ret & PHY_CTL1_MDICD || ret & PHY_CTL1_MDIAB)
489 phydev->mdix_ctrl = ETH_TP_MDI_X;
490 else
491 phydev->mdix_ctrl = ETH_TP_MDI;
492
493 ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, PHY_PMA_MGBT_POLARITY);
494 if (ret < 0)
495 return ret;
496
497 if ((ret & PHY_MDI_MDI_X_MASK) < PHY_MDI_MDI_X_NORMAL)
498 phydev->mdix = ETH_TP_MDI_X;
499 else
500 phydev->mdix = ETH_TP_MDI;
501
502 return 0;
503}
504
505static int gpy_update_interface(struct phy_device *phydev)
506{
507 int ret;
508
509 /* Interface mode is fixed for USXGMII and integrated PHY */
510 if (phydev->interface == PHY_INTERFACE_MODE_USXGMII ||
511 phydev->interface == PHY_INTERFACE_MODE_INTERNAL)
512 return -EINVAL;
513
514 /* Automatically switch SERDES interface between SGMII and 2500-BaseX
515 * according to speed. Disable ANEG in 2500-BaseX mode.
516 */
517 switch (phydev->speed) {
518 case SPEED_2500:
519 phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
520 ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
521 VSPEC1_SGMII_CTRL_ANEN, 0);
522 if (ret < 0) {
523 phydev_err(phydev,
524 "Error: Disable of SGMII ANEG failed: %d\n",
525 ret);
526 return ret;
527 }
528 break;
529 case SPEED_1000:
530 case SPEED_100:
531 case SPEED_10:
532 phydev->interface = PHY_INTERFACE_MODE_SGMII;
533 if (gpy_sgmii_aneg_en(phydev))
534 break;
535 /* Enable and restart SGMII ANEG for 10/100/1000Mbps link speed
536 * if ANEG is disabled (in 2500-BaseX mode).
537 */
538 ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
539 VSPEC1_SGMII_ANEN_ANRS,
540 VSPEC1_SGMII_ANEN_ANRS);
541 if (ret < 0) {
542 phydev_err(phydev,
543 "Error: Enable of SGMII ANEG failed: %d\n",
544 ret);
545 return ret;
546 }
547 break;
548 }
549
550 if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000) {
551 ret = genphy_read_master_slave(phydev);
552 if (ret < 0)
553 return ret;
554 }
555
556 return gpy_update_mdix(phydev);
557}
558
559static int gpy_read_status(struct phy_device *phydev)
560{
561 int ret;
562
563 ret = genphy_update_link(phydev);
564 if (ret)
565 return ret;
566
567 phydev->speed = SPEED_UNKNOWN;
568 phydev->duplex = DUPLEX_UNKNOWN;
569 phydev->pause = 0;
570 phydev->asym_pause = 0;
571
572 if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
573 ret = genphy_c45_read_lpa(phydev);
574 if (ret < 0)
575 return ret;
576
577 /* Read the link partner's 1G advertisement */
578 ret = phy_read(phydev, MII_STAT1000);
579 if (ret < 0)
580 return ret;
581 mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
582 } else if (phydev->autoneg == AUTONEG_DISABLE) {
583 linkmode_zero(phydev->lp_advertising);
584 }
585
586 ret = phy_read(phydev, PHY_MIISTAT);
587 if (ret < 0)
588 return ret;
589
590 phydev->link = (ret & PHY_MIISTAT_LS) ? 1 : 0;
591 phydev->duplex = (ret & PHY_MIISTAT_DPX) ? DUPLEX_FULL : DUPLEX_HALF;
592 switch (FIELD_GET(PHY_MIISTAT_SPD_MASK, ret)) {
593 case PHY_MIISTAT_SPD_10:
594 phydev->speed = SPEED_10;
595 break;
596 case PHY_MIISTAT_SPD_100:
597 phydev->speed = SPEED_100;
598 break;
599 case PHY_MIISTAT_SPD_1000:
600 phydev->speed = SPEED_1000;
601 break;
602 case PHY_MIISTAT_SPD_2500:
603 phydev->speed = SPEED_2500;
604 break;
605 }
606
607 if (phydev->link) {
608 ret = gpy_update_interface(phydev);
609 if (ret < 0)
610 return ret;
611 }
612
613 return 0;
614}
615
616static int gpy_config_intr(struct phy_device *phydev)
617{
618 u16 mask = 0;
619
620 if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
621 mask = PHY_IMASK_MASK;
622
623 return phy_write(phydev, PHY_IMASK, mask);
624}
625
626static irqreturn_t gpy_handle_interrupt(struct phy_device *phydev)
627{
628 int reg;
629
630 reg = phy_read(phydev, PHY_ISTAT);
631 if (reg < 0) {
632 phy_error(phydev);
633 return IRQ_NONE;
634 }
635
636 if (!(reg & PHY_IMASK_MASK))
637 return IRQ_NONE;
638
639 /* The PHY might leave the interrupt line asserted even after PHY_ISTAT
640 * is read. To avoid interrupt storms, delay the interrupt handling as
641 * long as the PHY drives the interrupt line. An internal bus read will
642 * stall as long as the interrupt line is asserted, thus just read a
643 * random register here.
644 * Because we cannot access the internal bus at all while the interrupt
645 * is driven by the PHY, there is no way to make the interrupt line
646 * unstuck (e.g. by changing the pinmux to GPIO input) during that time
647 * frame. Therefore, polling is the best we can do and won't do any more
648 * harm.
649 * It was observed that this bug happens on link state and link speed
650 * changes on a GPY215B and GYP215C independent of the firmware version
651 * (which doesn't mean that this list is exhaustive).
652 */
653 if (gpy_has_broken_mdint(phydev) &&
654 (reg & (PHY_IMASK_LSTC | PHY_IMASK_LSPC))) {
655 reg = gpy_mbox_read(phydev, REG_GPIO0_OUT);
656 if (reg < 0) {
657 phy_error(phydev);
658 return IRQ_NONE;
659 }
660 }
661
662 phy_trigger_machine(phydev);
663
664 return IRQ_HANDLED;
665}
666
667static int gpy_set_wol(struct phy_device *phydev,
668 struct ethtool_wolinfo *wol)
669{
670 struct net_device *attach_dev = phydev->attached_dev;
671 int ret;
672
673 if (wol->wolopts & WAKE_MAGIC) {
674 /* MAC address - Byte0:Byte1:Byte2:Byte3:Byte4:Byte5
675 * VPSPEC2_WOL_AD45 = Byte0:Byte1
676 * VPSPEC2_WOL_AD23 = Byte2:Byte3
677 * VPSPEC2_WOL_AD01 = Byte4:Byte5
678 */
679 ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
680 VPSPEC2_WOL_AD45,
681 ((attach_dev->dev_addr[0] << 8) |
682 attach_dev->dev_addr[1]));
683 if (ret < 0)
684 return ret;
685
686 ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
687 VPSPEC2_WOL_AD23,
688 ((attach_dev->dev_addr[2] << 8) |
689 attach_dev->dev_addr[3]));
690 if (ret < 0)
691 return ret;
692
693 ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
694 VPSPEC2_WOL_AD01,
695 ((attach_dev->dev_addr[4] << 8) |
696 attach_dev->dev_addr[5]));
697 if (ret < 0)
698 return ret;
699
700 /* Enable the WOL interrupt */
701 ret = phy_write(phydev, PHY_IMASK, PHY_IMASK_WOL);
702 if (ret < 0)
703 return ret;
704
705 /* Enable magic packet matching */
706 ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
707 VPSPEC2_WOL_CTL,
708 WOL_EN);
709 if (ret < 0)
710 return ret;
711
712 /* Clear the interrupt status register.
713 * Only WoL is enabled so clear all.
714 */
715 ret = phy_read(phydev, PHY_ISTAT);
716 if (ret < 0)
717 return ret;
718 } else {
719 /* Disable magic packet matching */
720 ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
721 VPSPEC2_WOL_CTL,
722 WOL_EN);
723 if (ret < 0)
724 return ret;
725 }
726
727 if (wol->wolopts & WAKE_PHY) {
728 /* Enable the link state change interrupt */
729 ret = phy_set_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
730 if (ret < 0)
731 return ret;
732
733 /* Clear the interrupt status register */
734 ret = phy_read(phydev, PHY_ISTAT);
735 if (ret < 0)
736 return ret;
737
738 if (ret & (PHY_IMASK_MASK & ~PHY_IMASK_LSTC))
739 phy_trigger_machine(phydev);
740
741 return 0;
742 }
743
744 /* Disable the link state change interrupt */
745 return phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
746}
747
748static void gpy_get_wol(struct phy_device *phydev,
749 struct ethtool_wolinfo *wol)
750{
751 int ret;
752
753 wol->supported = WAKE_MAGIC | WAKE_PHY;
754 wol->wolopts = 0;
755
756 ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, VPSPEC2_WOL_CTL);
757 if (ret & WOL_EN)
758 wol->wolopts |= WAKE_MAGIC;
759
760 ret = phy_read(phydev, PHY_IMASK);
761 if (ret & PHY_IMASK_LSTC)
762 wol->wolopts |= WAKE_PHY;
763}
764
765static int gpy_loopback(struct phy_device *phydev, bool enable)
766{
767 int ret;
768
769 ret = phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK,
770 enable ? BMCR_LOOPBACK : 0);
771 if (!ret) {
772 /* It takes some time for PHY device to switch
773 * into/out-of loopback mode.
774 */
775 msleep(100);
776 }
777
778 return ret;
779}
780
781static int gpy115_loopback(struct phy_device *phydev, bool enable)
782{
783 struct gpy_priv *priv = phydev->priv;
784
785 if (enable)
786 return gpy_loopback(phydev, enable);
787
788 if (priv->fw_minor > 0x76)
789 return gpy_loopback(phydev, 0);
790
791 return genphy_soft_reset(phydev);
792}
793
794static struct phy_driver gpy_drivers[] = {
795 {
796 PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx),
797 .name = "Maxlinear Ethernet GPY2xx",
798 .get_features = genphy_c45_pma_read_abilities,
799 .config_init = gpy_config_init,
800 .probe = gpy_probe,
801 .suspend = genphy_suspend,
802 .resume = genphy_resume,
803 .config_aneg = gpy_config_aneg,
804 .aneg_done = genphy_c45_aneg_done,
805 .read_status = gpy_read_status,
806 .config_intr = gpy_config_intr,
807 .handle_interrupt = gpy_handle_interrupt,
808 .set_wol = gpy_set_wol,
809 .get_wol = gpy_get_wol,
810 .set_loopback = gpy_loopback,
811 },
812 {
813 .phy_id = PHY_ID_GPY115B,
814 .phy_id_mask = PHY_ID_GPYx15B_MASK,
815 .name = "Maxlinear Ethernet GPY115B",
816 .get_features = genphy_c45_pma_read_abilities,
817 .config_init = gpy_config_init,
818 .probe = gpy_probe,
819 .suspend = genphy_suspend,
820 .resume = genphy_resume,
821 .config_aneg = gpy_config_aneg,
822 .aneg_done = genphy_c45_aneg_done,
823 .read_status = gpy_read_status,
824 .config_intr = gpy_config_intr,
825 .handle_interrupt = gpy_handle_interrupt,
826 .set_wol = gpy_set_wol,
827 .get_wol = gpy_get_wol,
828 .set_loopback = gpy115_loopback,
829 },
830 {
831 PHY_ID_MATCH_MODEL(PHY_ID_GPY115C),
832 .name = "Maxlinear Ethernet GPY115C",
833 .get_features = genphy_c45_pma_read_abilities,
834 .config_init = gpy_config_init,
835 .probe = gpy_probe,
836 .suspend = genphy_suspend,
837 .resume = genphy_resume,
838 .config_aneg = gpy_config_aneg,
839 .aneg_done = genphy_c45_aneg_done,
840 .read_status = gpy_read_status,
841 .config_intr = gpy_config_intr,
842 .handle_interrupt = gpy_handle_interrupt,
843 .set_wol = gpy_set_wol,
844 .get_wol = gpy_get_wol,
845 .set_loopback = gpy115_loopback,
846 },
847 {
848 .phy_id = PHY_ID_GPY211B,
849 .phy_id_mask = PHY_ID_GPY21xB_MASK,
850 .name = "Maxlinear Ethernet GPY211B",
851 .get_features = genphy_c45_pma_read_abilities,
852 .config_init = gpy_config_init,
853 .probe = gpy_probe,
854 .suspend = genphy_suspend,
855 .resume = genphy_resume,
856 .config_aneg = gpy_config_aneg,
857 .aneg_done = genphy_c45_aneg_done,
858 .read_status = gpy_read_status,
859 .config_intr = gpy_config_intr,
860 .handle_interrupt = gpy_handle_interrupt,
861 .set_wol = gpy_set_wol,
862 .get_wol = gpy_get_wol,
863 .set_loopback = gpy_loopback,
864 },
865 {
866 PHY_ID_MATCH_MODEL(PHY_ID_GPY211C),
867 .name = "Maxlinear Ethernet GPY211C",
868 .get_features = genphy_c45_pma_read_abilities,
869 .config_init = gpy_config_init,
870 .probe = gpy_probe,
871 .suspend = genphy_suspend,
872 .resume = genphy_resume,
873 .config_aneg = gpy_config_aneg,
874 .aneg_done = genphy_c45_aneg_done,
875 .read_status = gpy_read_status,
876 .config_intr = gpy_config_intr,
877 .handle_interrupt = gpy_handle_interrupt,
878 .set_wol = gpy_set_wol,
879 .get_wol = gpy_get_wol,
880 .set_loopback = gpy_loopback,
881 },
882 {
883 .phy_id = PHY_ID_GPY212B,
884 .phy_id_mask = PHY_ID_GPY21xB_MASK,
885 .name = "Maxlinear Ethernet GPY212B",
886 .get_features = genphy_c45_pma_read_abilities,
887 .config_init = gpy_config_init,
888 .probe = gpy_probe,
889 .suspend = genphy_suspend,
890 .resume = genphy_resume,
891 .config_aneg = gpy_config_aneg,
892 .aneg_done = genphy_c45_aneg_done,
893 .read_status = gpy_read_status,
894 .config_intr = gpy_config_intr,
895 .handle_interrupt = gpy_handle_interrupt,
896 .set_wol = gpy_set_wol,
897 .get_wol = gpy_get_wol,
898 .set_loopback = gpy_loopback,
899 },
900 {
901 PHY_ID_MATCH_MODEL(PHY_ID_GPY212C),
902 .name = "Maxlinear Ethernet GPY212C",
903 .get_features = genphy_c45_pma_read_abilities,
904 .config_init = gpy_config_init,
905 .probe = gpy_probe,
906 .suspend = genphy_suspend,
907 .resume = genphy_resume,
908 .config_aneg = gpy_config_aneg,
909 .aneg_done = genphy_c45_aneg_done,
910 .read_status = gpy_read_status,
911 .config_intr = gpy_config_intr,
912 .handle_interrupt = gpy_handle_interrupt,
913 .set_wol = gpy_set_wol,
914 .get_wol = gpy_get_wol,
915 .set_loopback = gpy_loopback,
916 },
917 {
918 .phy_id = PHY_ID_GPY215B,
919 .phy_id_mask = PHY_ID_GPYx15B_MASK,
920 .name = "Maxlinear Ethernet GPY215B",
921 .get_features = genphy_c45_pma_read_abilities,
922 .config_init = gpy_config_init,
923 .probe = gpy_probe,
924 .suspend = genphy_suspend,
925 .resume = genphy_resume,
926 .config_aneg = gpy_config_aneg,
927 .aneg_done = genphy_c45_aneg_done,
928 .read_status = gpy_read_status,
929 .config_intr = gpy_config_intr,
930 .handle_interrupt = gpy_handle_interrupt,
931 .set_wol = gpy_set_wol,
932 .get_wol = gpy_get_wol,
933 .set_loopback = gpy_loopback,
934 },
935 {
936 PHY_ID_MATCH_MODEL(PHY_ID_GPY215C),
937 .name = "Maxlinear Ethernet GPY215C",
938 .get_features = genphy_c45_pma_read_abilities,
939 .config_init = gpy_config_init,
940 .probe = gpy_probe,
941 .suspend = genphy_suspend,
942 .resume = genphy_resume,
943 .config_aneg = gpy_config_aneg,
944 .aneg_done = genphy_c45_aneg_done,
945 .read_status = gpy_read_status,
946 .config_intr = gpy_config_intr,
947 .handle_interrupt = gpy_handle_interrupt,
948 .set_wol = gpy_set_wol,
949 .get_wol = gpy_get_wol,
950 .set_loopback = gpy_loopback,
951 },
952 {
953 PHY_ID_MATCH_MODEL(PHY_ID_GPY241B),
954 .name = "Maxlinear Ethernet GPY241B",
955 .get_features = genphy_c45_pma_read_abilities,
956 .config_init = gpy_config_init,
957 .probe = gpy_probe,
958 .suspend = genphy_suspend,
959 .resume = genphy_resume,
960 .config_aneg = gpy_config_aneg,
961 .aneg_done = genphy_c45_aneg_done,
962 .read_status = gpy_read_status,
963 .config_intr = gpy_config_intr,
964 .handle_interrupt = gpy_handle_interrupt,
965 .set_wol = gpy_set_wol,
966 .get_wol = gpy_get_wol,
967 .set_loopback = gpy_loopback,
968 },
969 {
970 PHY_ID_MATCH_MODEL(PHY_ID_GPY241BM),
971 .name = "Maxlinear Ethernet GPY241BM",
972 .get_features = genphy_c45_pma_read_abilities,
973 .config_init = gpy_config_init,
974 .probe = gpy_probe,
975 .suspend = genphy_suspend,
976 .resume = genphy_resume,
977 .config_aneg = gpy_config_aneg,
978 .aneg_done = genphy_c45_aneg_done,
979 .read_status = gpy_read_status,
980 .config_intr = gpy_config_intr,
981 .handle_interrupt = gpy_handle_interrupt,
982 .set_wol = gpy_set_wol,
983 .get_wol = gpy_get_wol,
984 .set_loopback = gpy_loopback,
985 },
986 {
987 PHY_ID_MATCH_MODEL(PHY_ID_GPY245B),
988 .name = "Maxlinear Ethernet GPY245B",
989 .get_features = genphy_c45_pma_read_abilities,
990 .config_init = gpy_config_init,
991 .probe = gpy_probe,
992 .suspend = genphy_suspend,
993 .resume = genphy_resume,
994 .config_aneg = gpy_config_aneg,
995 .aneg_done = genphy_c45_aneg_done,
996 .read_status = gpy_read_status,
997 .config_intr = gpy_config_intr,
998 .handle_interrupt = gpy_handle_interrupt,
999 .set_wol = gpy_set_wol,
1000 .get_wol = gpy_get_wol,
1001 .set_loopback = gpy_loopback,
1002 },
1003};
1004module_phy_driver(gpy_drivers);
1005
1006static struct mdio_device_id __maybe_unused gpy_tbl[] = {
1007 {PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx)},
1008 {PHY_ID_GPY115B, PHY_ID_GPYx15B_MASK},
1009 {PHY_ID_MATCH_MODEL(PHY_ID_GPY115C)},
1010 {PHY_ID_GPY211B, PHY_ID_GPY21xB_MASK},
1011 {PHY_ID_MATCH_MODEL(PHY_ID_GPY211C)},
1012 {PHY_ID_GPY212B, PHY_ID_GPY21xB_MASK},
1013 {PHY_ID_MATCH_MODEL(PHY_ID_GPY212C)},
1014 {PHY_ID_GPY215B, PHY_ID_GPYx15B_MASK},
1015 {PHY_ID_MATCH_MODEL(PHY_ID_GPY215C)},
1016 {PHY_ID_MATCH_MODEL(PHY_ID_GPY241B)},
1017 {PHY_ID_MATCH_MODEL(PHY_ID_GPY241BM)},
1018 {PHY_ID_MATCH_MODEL(PHY_ID_GPY245B)},
1019 { }
1020};
1021MODULE_DEVICE_TABLE(mdio, gpy_tbl);
1022
1023MODULE_DESCRIPTION("Maxlinear Ethernet GPY Driver");
1024MODULE_AUTHOR("Xu Liang");
1025MODULE_LICENSE("GPL");