Loading...
1/*
2 * Driver for DEC VSXXX-AA mouse (hockey-puck mouse, ball or two rollers)
3 * DEC VSXXX-GA mouse (rectangular mouse, with ball)
4 * DEC VSXXX-AB tablet (digitizer with hair cross or stylus)
5 *
6 * Copyright (C) 2003-2004 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
7 *
8 * The packet format was initially taken from a patch to GPM which is (C) 2001
9 * by Karsten Merker <merker@linuxtag.org>
10 * and Maciej W. Rozycki <macro@ds2.pg.gda.pl>
11 * Later on, I had access to the device's documentation (referenced below).
12 */
13
14/*
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
28 */
29
30/*
31 * Building an adaptor to DE9 / DB25 RS232
32 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
33 *
34 * DISCLAIMER: Use this description AT YOUR OWN RISK! I'll not pay for
35 * anything if you break your mouse, your computer or whatever!
36 *
37 * In theory, this mouse is a simple RS232 device. In practice, it has got
38 * a quite uncommon plug and the requirement to additionally get a power
39 * supply at +5V and -12V.
40 *
41 * If you look at the socket/jack (_not_ at the plug), we use this pin
42 * numbering:
43 * _______
44 * / 7 6 5 \
45 * | 4 --- 3 |
46 * \ 2 1 /
47 * -------
48 *
49 * DEC socket DE9 DB25 Note
50 * 1 (GND) 5 7 -
51 * 2 (RxD) 2 3 -
52 * 3 (TxD) 3 2 -
53 * 4 (-12V) - - Somewhere from the PSU. At ATX, it's
54 * the thin blue wire at pin 12 of the
55 * ATX power connector. Only required for
56 * VSXXX-AA/-GA mice.
57 * 5 (+5V) - - PSU (red wires of ATX power connector
58 * on pin 4, 6, 19 or 20) or HDD power
59 * connector (also red wire).
60 * 6 (+12V) - - HDD power connector, yellow wire. Only
61 * required for VSXXX-AB digitizer.
62 * 7 (dev. avail.) - - The mouse shorts this one to pin 1.
63 * This way, the host computer can detect
64 * the mouse. To use it with the adaptor,
65 * simply don't connect this pin.
66 *
67 * So to get a working adaptor, you need to connect the mouse with three
68 * wires to a RS232 port and two or three additional wires for +5V, +12V and
69 * -12V to the PSU.
70 *
71 * Flow specification for the link is 4800, 8o1.
72 *
73 * The mice and tablet are described in "VCB02 Video Subsystem - Technical
74 * Manual", DEC EK-104AA-TM-001. You'll find it at MANX, a search engine
75 * specific for DEC documentation. Try
76 * http://www.vt100.net/manx/details?pn=EK-104AA-TM-001;id=21;cp=1
77 */
78
79#include <linux/delay.h>
80#include <linux/module.h>
81#include <linux/slab.h>
82#include <linux/interrupt.h>
83#include <linux/input.h>
84#include <linux/serio.h>
85#include <linux/init.h>
86
87#define DRIVER_DESC "Driver for DEC VSXXX-AA and -GA mice and VSXXX-AB tablet"
88
89MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
90MODULE_DESCRIPTION(DRIVER_DESC);
91MODULE_LICENSE("GPL");
92
93#undef VSXXXAA_DEBUG
94#ifdef VSXXXAA_DEBUG
95#define DBG(x...) printk(x)
96#else
97#define DBG(x...) do {} while (0)
98#endif
99
100#define VSXXXAA_INTRO_MASK 0x80
101#define VSXXXAA_INTRO_HEAD 0x80
102#define IS_HDR_BYTE(x) \
103 (((x) & VSXXXAA_INTRO_MASK) == VSXXXAA_INTRO_HEAD)
104
105#define VSXXXAA_PACKET_MASK 0xe0
106#define VSXXXAA_PACKET_REL 0x80
107#define VSXXXAA_PACKET_ABS 0xc0
108#define VSXXXAA_PACKET_POR 0xa0
109#define MATCH_PACKET_TYPE(data, type) \
110 (((data) & VSXXXAA_PACKET_MASK) == (type))
111
112
113
114struct vsxxxaa {
115 struct input_dev *dev;
116 struct serio *serio;
117#define BUFLEN 15 /* At least 5 is needed for a full tablet packet */
118 unsigned char buf[BUFLEN];
119 unsigned char count;
120 unsigned char version;
121 unsigned char country;
122 unsigned char type;
123 char name[64];
124 char phys[32];
125};
126
127static void vsxxxaa_drop_bytes(struct vsxxxaa *mouse, int num)
128{
129 if (num >= mouse->count) {
130 mouse->count = 0;
131 } else {
132 memmove(mouse->buf, mouse->buf + num - 1, BUFLEN - num);
133 mouse->count -= num;
134 }
135}
136
137static void vsxxxaa_queue_byte(struct vsxxxaa *mouse, unsigned char byte)
138{
139 if (mouse->count == BUFLEN) {
140 printk(KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
141 mouse->name, mouse->phys);
142 vsxxxaa_drop_bytes(mouse, 1);
143 }
144
145 DBG(KERN_INFO "Queueing byte 0x%02x\n", byte);
146
147 mouse->buf[mouse->count++] = byte;
148}
149
150static void vsxxxaa_detection_done(struct vsxxxaa *mouse)
151{
152 switch (mouse->type) {
153 case 0x02:
154 strlcpy(mouse->name, "DEC VSXXX-AA/-GA mouse",
155 sizeof(mouse->name));
156 break;
157
158 case 0x04:
159 strlcpy(mouse->name, "DEC VSXXX-AB digitizer",
160 sizeof(mouse->name));
161 break;
162
163 default:
164 snprintf(mouse->name, sizeof(mouse->name),
165 "unknown DEC pointer device (type = 0x%02x)",
166 mouse->type);
167 break;
168 }
169
170 printk(KERN_INFO
171 "Found %s version 0x%02x from country 0x%02x on port %s\n",
172 mouse->name, mouse->version, mouse->country, mouse->phys);
173}
174
175/*
176 * Returns number of bytes to be dropped, 0 if packet is okay.
177 */
178static int vsxxxaa_check_packet(struct vsxxxaa *mouse, int packet_len)
179{
180 int i;
181
182 /* First byte must be a header byte */
183 if (!IS_HDR_BYTE(mouse->buf[0])) {
184 DBG("vsck: len=%d, 1st=0x%02x\n", packet_len, mouse->buf[0]);
185 return 1;
186 }
187
188 /* Check all following bytes */
189 for (i = 1; i < packet_len; i++) {
190 if (IS_HDR_BYTE(mouse->buf[i])) {
191 printk(KERN_ERR
192 "Need to drop %d bytes of a broken packet.\n",
193 i - 1);
194 DBG(KERN_INFO "check: len=%d, b[%d]=0x%02x\n",
195 packet_len, i, mouse->buf[i]);
196 return i - 1;
197 }
198 }
199
200 return 0;
201}
202
203static inline int vsxxxaa_smells_like_packet(struct vsxxxaa *mouse,
204 unsigned char type, size_t len)
205{
206 return mouse->count >= len && MATCH_PACKET_TYPE(mouse->buf[0], type);
207}
208
209static void vsxxxaa_handle_REL_packet(struct vsxxxaa *mouse)
210{
211 struct input_dev *dev = mouse->dev;
212 unsigned char *buf = mouse->buf;
213 int left, middle, right;
214 int dx, dy;
215
216 /*
217 * Check for normal stream packets. This is three bytes,
218 * with the first byte's 3 MSB set to 100.
219 *
220 * [0]: 1 0 0 SignX SignY Left Middle Right
221 * [1]: 0 dx dx dx dx dx dx dx
222 * [2]: 0 dy dy dy dy dy dy dy
223 */
224
225 /*
226 * Low 7 bit of byte 1 are abs(dx), bit 7 is
227 * 0, bit 4 of byte 0 is direction.
228 */
229 dx = buf[1] & 0x7f;
230 dx *= ((buf[0] >> 4) & 0x01) ? 1 : -1;
231
232 /*
233 * Low 7 bit of byte 2 are abs(dy), bit 7 is
234 * 0, bit 3 of byte 0 is direction.
235 */
236 dy = buf[2] & 0x7f;
237 dy *= ((buf[0] >> 3) & 0x01) ? -1 : 1;
238
239 /*
240 * Get button state. It's the low three bits
241 * (for three buttons) of byte 0.
242 */
243 left = buf[0] & 0x04;
244 middle = buf[0] & 0x02;
245 right = buf[0] & 0x01;
246
247 vsxxxaa_drop_bytes(mouse, 3);
248
249 DBG(KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
250 mouse->name, mouse->phys, dx, dy,
251 left ? "L" : "l", middle ? "M" : "m", right ? "R" : "r");
252
253 /*
254 * Report what we've found so far...
255 */
256 input_report_key(dev, BTN_LEFT, left);
257 input_report_key(dev, BTN_MIDDLE, middle);
258 input_report_key(dev, BTN_RIGHT, right);
259 input_report_key(dev, BTN_TOUCH, 0);
260 input_report_rel(dev, REL_X, dx);
261 input_report_rel(dev, REL_Y, dy);
262 input_sync(dev);
263}
264
265static void vsxxxaa_handle_ABS_packet(struct vsxxxaa *mouse)
266{
267 struct input_dev *dev = mouse->dev;
268 unsigned char *buf = mouse->buf;
269 int left, middle, right, touch;
270 int x, y;
271
272 /*
273 * Tablet position / button packet
274 *
275 * [0]: 1 1 0 B4 B3 B2 B1 Pr
276 * [1]: 0 0 X5 X4 X3 X2 X1 X0
277 * [2]: 0 0 X11 X10 X9 X8 X7 X6
278 * [3]: 0 0 Y5 Y4 Y3 Y2 Y1 Y0
279 * [4]: 0 0 Y11 Y10 Y9 Y8 Y7 Y6
280 */
281
282 /*
283 * Get X/Y position. Y axis needs to be inverted since VSXXX-AB
284 * counts down->top while monitor counts top->bottom.
285 */
286 x = ((buf[2] & 0x3f) << 6) | (buf[1] & 0x3f);
287 y = ((buf[4] & 0x3f) << 6) | (buf[3] & 0x3f);
288 y = 1023 - y;
289
290 /*
291 * Get button state. It's bits <4..1> of byte 0.
292 */
293 left = buf[0] & 0x02;
294 middle = buf[0] & 0x04;
295 right = buf[0] & 0x08;
296 touch = buf[0] & 0x10;
297
298 vsxxxaa_drop_bytes(mouse, 5);
299
300 DBG(KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
301 mouse->name, mouse->phys, x, y,
302 left ? "L" : "l", middle ? "M" : "m",
303 right ? "R" : "r", touch ? "T" : "t");
304
305 /*
306 * Report what we've found so far...
307 */
308 input_report_key(dev, BTN_LEFT, left);
309 input_report_key(dev, BTN_MIDDLE, middle);
310 input_report_key(dev, BTN_RIGHT, right);
311 input_report_key(dev, BTN_TOUCH, touch);
312 input_report_abs(dev, ABS_X, x);
313 input_report_abs(dev, ABS_Y, y);
314 input_sync(dev);
315}
316
317static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
318{
319 struct input_dev *dev = mouse->dev;
320 unsigned char *buf = mouse->buf;
321 int left, middle, right;
322 unsigned char error;
323
324 /*
325 * Check for Power-On-Reset packets. These are sent out
326 * after plugging the mouse in, or when explicitly
327 * requested by sending 'T'.
328 *
329 * [0]: 1 0 1 0 R3 R2 R1 R0
330 * [1]: 0 M2 M1 M0 D3 D2 D1 D0
331 * [2]: 0 E6 E5 E4 E3 E2 E1 E0
332 * [3]: 0 0 0 0 0 Left Middle Right
333 *
334 * M: manufacturer location code
335 * R: revision code
336 * E: Error code. If it's in the range of 0x00..0x1f, only some
337 * minor problem occurred. Errors >= 0x20 are considered bad
338 * and the device may not work properly...
339 * D: <0010> == mouse, <0100> == tablet
340 */
341
342 mouse->version = buf[0] & 0x0f;
343 mouse->country = (buf[1] >> 4) & 0x07;
344 mouse->type = buf[1] & 0x0f;
345 error = buf[2] & 0x7f;
346
347 /*
348 * Get button state. It's the low three bits
349 * (for three buttons) of byte 0. Maybe even the bit <3>
350 * has some meaning if a tablet is attached.
351 */
352 left = buf[0] & 0x04;
353 middle = buf[0] & 0x02;
354 right = buf[0] & 0x01;
355
356 vsxxxaa_drop_bytes(mouse, 4);
357 vsxxxaa_detection_done(mouse);
358
359 if (error <= 0x1f) {
360 /* No (serious) error. Report buttons */
361 input_report_key(dev, BTN_LEFT, left);
362 input_report_key(dev, BTN_MIDDLE, middle);
363 input_report_key(dev, BTN_RIGHT, right);
364 input_report_key(dev, BTN_TOUCH, 0);
365 input_sync(dev);
366
367 if (error != 0)
368 printk(KERN_INFO "Your %s on %s reports error=0x%02x\n",
369 mouse->name, mouse->phys, error);
370
371 }
372
373 /*
374 * If the mouse was hot-plugged, we need to force differential mode
375 * now... However, give it a second to recover from it's reset.
376 */
377 printk(KERN_NOTICE
378 "%s on %s: Forcing standard packet format, "
379 "incremental streaming mode and 72 samples/sec\n",
380 mouse->name, mouse->phys);
381 serio_write(mouse->serio, 'S'); /* Standard format */
382 mdelay(50);
383 serio_write(mouse->serio, 'R'); /* Incremental */
384 mdelay(50);
385 serio_write(mouse->serio, 'L'); /* 72 samples/sec */
386}
387
388static void vsxxxaa_parse_buffer(struct vsxxxaa *mouse)
389{
390 unsigned char *buf = mouse->buf;
391 int stray_bytes;
392
393 /*
394 * Parse buffer to death...
395 */
396 do {
397 /*
398 * Out of sync? Throw away what we don't understand. Each
399 * packet starts with a byte whose bit 7 is set. Unhandled
400 * packets (ie. which we don't know about or simply b0rk3d
401 * data...) will get shifted out of the buffer after some
402 * activity on the mouse.
403 */
404 while (mouse->count > 0 && !IS_HDR_BYTE(buf[0])) {
405 printk(KERN_ERR "%s on %s: Dropping a byte to regain "
406 "sync with mouse data stream...\n",
407 mouse->name, mouse->phys);
408 vsxxxaa_drop_bytes(mouse, 1);
409 }
410
411 /*
412 * Check for packets we know about.
413 */
414
415 if (vsxxxaa_smells_like_packet(mouse, VSXXXAA_PACKET_REL, 3)) {
416 /* Check for broken packet */
417 stray_bytes = vsxxxaa_check_packet(mouse, 3);
418 if (!stray_bytes)
419 vsxxxaa_handle_REL_packet(mouse);
420
421 } else if (vsxxxaa_smells_like_packet(mouse,
422 VSXXXAA_PACKET_ABS, 5)) {
423 /* Check for broken packet */
424 stray_bytes = vsxxxaa_check_packet(mouse, 5);
425 if (!stray_bytes)
426 vsxxxaa_handle_ABS_packet(mouse);
427
428 } else if (vsxxxaa_smells_like_packet(mouse,
429 VSXXXAA_PACKET_POR, 4)) {
430 /* Check for broken packet */
431 stray_bytes = vsxxxaa_check_packet(mouse, 4);
432 if (!stray_bytes)
433 vsxxxaa_handle_POR_packet(mouse);
434
435 } else {
436 break; /* No REL, ABS or POR packet found */
437 }
438
439 if (stray_bytes > 0) {
440 printk(KERN_ERR "Dropping %d bytes now...\n",
441 stray_bytes);
442 vsxxxaa_drop_bytes(mouse, stray_bytes);
443 }
444
445 } while (1);
446}
447
448static irqreturn_t vsxxxaa_interrupt(struct serio *serio,
449 unsigned char data, unsigned int flags)
450{
451 struct vsxxxaa *mouse = serio_get_drvdata(serio);
452
453 vsxxxaa_queue_byte(mouse, data);
454 vsxxxaa_parse_buffer(mouse);
455
456 return IRQ_HANDLED;
457}
458
459static void vsxxxaa_disconnect(struct serio *serio)
460{
461 struct vsxxxaa *mouse = serio_get_drvdata(serio);
462
463 serio_close(serio);
464 serio_set_drvdata(serio, NULL);
465 input_unregister_device(mouse->dev);
466 kfree(mouse);
467}
468
469static int vsxxxaa_connect(struct serio *serio, struct serio_driver *drv)
470{
471 struct vsxxxaa *mouse;
472 struct input_dev *input_dev;
473 int err = -ENOMEM;
474
475 mouse = kzalloc(sizeof(struct vsxxxaa), GFP_KERNEL);
476 input_dev = input_allocate_device();
477 if (!mouse || !input_dev)
478 goto fail1;
479
480 mouse->dev = input_dev;
481 mouse->serio = serio;
482 strlcat(mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer",
483 sizeof(mouse->name));
484 snprintf(mouse->phys, sizeof(mouse->phys), "%s/input0", serio->phys);
485
486 input_dev->name = mouse->name;
487 input_dev->phys = mouse->phys;
488 input_dev->id.bustype = BUS_RS232;
489 input_dev->dev.parent = &serio->dev;
490
491 __set_bit(EV_KEY, input_dev->evbit); /* We have buttons */
492 __set_bit(EV_REL, input_dev->evbit);
493 __set_bit(EV_ABS, input_dev->evbit);
494 __set_bit(BTN_LEFT, input_dev->keybit); /* We have 3 buttons */
495 __set_bit(BTN_MIDDLE, input_dev->keybit);
496 __set_bit(BTN_RIGHT, input_dev->keybit);
497 __set_bit(BTN_TOUCH, input_dev->keybit); /* ...and Tablet */
498 __set_bit(REL_X, input_dev->relbit);
499 __set_bit(REL_Y, input_dev->relbit);
500 input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
501 input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
502
503 serio_set_drvdata(serio, mouse);
504
505 err = serio_open(serio, drv);
506 if (err)
507 goto fail2;
508
509 /*
510 * Request selftest. Standard packet format and differential
511 * mode will be requested after the device ID'ed successfully.
512 */
513 serio_write(serio, 'T'); /* Test */
514
515 err = input_register_device(input_dev);
516 if (err)
517 goto fail3;
518
519 return 0;
520
521 fail3: serio_close(serio);
522 fail2: serio_set_drvdata(serio, NULL);
523 fail1: input_free_device(input_dev);
524 kfree(mouse);
525 return err;
526}
527
528static struct serio_device_id vsxxaa_serio_ids[] = {
529 {
530 .type = SERIO_RS232,
531 .proto = SERIO_VSXXXAA,
532 .id = SERIO_ANY,
533 .extra = SERIO_ANY,
534 },
535 { 0 }
536};
537
538MODULE_DEVICE_TABLE(serio, vsxxaa_serio_ids);
539
540static struct serio_driver vsxxxaa_drv = {
541 .driver = {
542 .name = "vsxxxaa",
543 },
544 .description = DRIVER_DESC,
545 .id_table = vsxxaa_serio_ids,
546 .connect = vsxxxaa_connect,
547 .interrupt = vsxxxaa_interrupt,
548 .disconnect = vsxxxaa_disconnect,
549};
550
551static int __init vsxxxaa_init(void)
552{
553 return serio_register_driver(&vsxxxaa_drv);
554}
555
556static void __exit vsxxxaa_exit(void)
557{
558 serio_unregister_driver(&vsxxxaa_drv);
559}
560
561module_init(vsxxxaa_init);
562module_exit(vsxxxaa_exit);
563
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Driver for DEC VSXXX-AA mouse (hockey-puck mouse, ball or two rollers)
4 * DEC VSXXX-GA mouse (rectangular mouse, with ball)
5 * DEC VSXXX-AB tablet (digitizer with hair cross or stylus)
6 *
7 * Copyright (C) 2003-2004 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
8 *
9 * The packet format was initially taken from a patch to GPM which is (C) 2001
10 * by Karsten Merker <merker@linuxtag.org>
11 * and Maciej W. Rozycki <macro@ds2.pg.gda.pl>
12 * Later on, I had access to the device's documentation (referenced below).
13 */
14
15/*
16 * Building an adaptor to DE9 / DB25 RS232
17 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18 *
19 * DISCLAIMER: Use this description AT YOUR OWN RISK! I'll not pay for
20 * anything if you break your mouse, your computer or whatever!
21 *
22 * In theory, this mouse is a simple RS232 device. In practice, it has got
23 * a quite uncommon plug and the requirement to additionally get a power
24 * supply at +5V and -12V.
25 *
26 * If you look at the socket/jack (_not_ at the plug), we use this pin
27 * numbering:
28 * _______
29 * / 7 6 5 \
30 * | 4 --- 3 |
31 * \ 2 1 /
32 * -------
33 *
34 * DEC socket DE9 DB25 Note
35 * 1 (GND) 5 7 -
36 * 2 (RxD) 2 3 -
37 * 3 (TxD) 3 2 -
38 * 4 (-12V) - - Somewhere from the PSU. At ATX, it's
39 * the thin blue wire at pin 12 of the
40 * ATX power connector. Only required for
41 * VSXXX-AA/-GA mice.
42 * 5 (+5V) - - PSU (red wires of ATX power connector
43 * on pin 4, 6, 19 or 20) or HDD power
44 * connector (also red wire).
45 * 6 (+12V) - - HDD power connector, yellow wire. Only
46 * required for VSXXX-AB digitizer.
47 * 7 (dev. avail.) - - The mouse shorts this one to pin 1.
48 * This way, the host computer can detect
49 * the mouse. To use it with the adaptor,
50 * simply don't connect this pin.
51 *
52 * So to get a working adaptor, you need to connect the mouse with three
53 * wires to a RS232 port and two or three additional wires for +5V, +12V and
54 * -12V to the PSU.
55 *
56 * Flow specification for the link is 4800, 8o1.
57 *
58 * The mice and tablet are described in "VCB02 Video Subsystem - Technical
59 * Manual", DEC EK-104AA-TM-001. You'll find it at MANX, a search engine
60 * specific for DEC documentation. Try
61 * http://www.vt100.net/manx/details?pn=EK-104AA-TM-001;id=21;cp=1
62 */
63
64#include <linux/delay.h>
65#include <linux/module.h>
66#include <linux/slab.h>
67#include <linux/interrupt.h>
68#include <linux/input.h>
69#include <linux/serio.h>
70
71#define DRIVER_DESC "Driver for DEC VSXXX-AA and -GA mice and VSXXX-AB tablet"
72
73MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
74MODULE_DESCRIPTION(DRIVER_DESC);
75MODULE_LICENSE("GPL");
76
77#undef VSXXXAA_DEBUG
78#ifdef VSXXXAA_DEBUG
79#define DBG(x...) printk(x)
80#else
81#define DBG(x...) do {} while (0)
82#endif
83
84#define VSXXXAA_INTRO_MASK 0x80
85#define VSXXXAA_INTRO_HEAD 0x80
86#define IS_HDR_BYTE(x) \
87 (((x) & VSXXXAA_INTRO_MASK) == VSXXXAA_INTRO_HEAD)
88
89#define VSXXXAA_PACKET_MASK 0xe0
90#define VSXXXAA_PACKET_REL 0x80
91#define VSXXXAA_PACKET_ABS 0xc0
92#define VSXXXAA_PACKET_POR 0xa0
93#define MATCH_PACKET_TYPE(data, type) \
94 (((data) & VSXXXAA_PACKET_MASK) == (type))
95
96
97
98struct vsxxxaa {
99 struct input_dev *dev;
100 struct serio *serio;
101#define BUFLEN 15 /* At least 5 is needed for a full tablet packet */
102 unsigned char buf[BUFLEN];
103 unsigned char count;
104 unsigned char version;
105 unsigned char country;
106 unsigned char type;
107 char name[64];
108 char phys[32];
109};
110
111static void vsxxxaa_drop_bytes(struct vsxxxaa *mouse, int num)
112{
113 if (num >= mouse->count) {
114 mouse->count = 0;
115 } else {
116 memmove(mouse->buf, mouse->buf + num, BUFLEN - num);
117 mouse->count -= num;
118 }
119}
120
121static void vsxxxaa_queue_byte(struct vsxxxaa *mouse, unsigned char byte)
122{
123 if (mouse->count == BUFLEN) {
124 printk(KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
125 mouse->name, mouse->phys);
126 vsxxxaa_drop_bytes(mouse, 1);
127 }
128
129 DBG(KERN_INFO "Queueing byte 0x%02x\n", byte);
130
131 mouse->buf[mouse->count++] = byte;
132}
133
134static void vsxxxaa_detection_done(struct vsxxxaa *mouse)
135{
136 switch (mouse->type) {
137 case 0x02:
138 strscpy(mouse->name, "DEC VSXXX-AA/-GA mouse",
139 sizeof(mouse->name));
140 break;
141
142 case 0x04:
143 strscpy(mouse->name, "DEC VSXXX-AB digitizer",
144 sizeof(mouse->name));
145 break;
146
147 default:
148 snprintf(mouse->name, sizeof(mouse->name),
149 "unknown DEC pointer device (type = 0x%02x)",
150 mouse->type);
151 break;
152 }
153
154 printk(KERN_INFO
155 "Found %s version 0x%02x from country 0x%02x on port %s\n",
156 mouse->name, mouse->version, mouse->country, mouse->phys);
157}
158
159/*
160 * Returns number of bytes to be dropped, 0 if packet is okay.
161 */
162static int vsxxxaa_check_packet(struct vsxxxaa *mouse, int packet_len)
163{
164 int i;
165
166 /* First byte must be a header byte */
167 if (!IS_HDR_BYTE(mouse->buf[0])) {
168 DBG("vsck: len=%d, 1st=0x%02x\n", packet_len, mouse->buf[0]);
169 return 1;
170 }
171
172 /* Check all following bytes */
173 for (i = 1; i < packet_len; i++) {
174 if (IS_HDR_BYTE(mouse->buf[i])) {
175 printk(KERN_ERR
176 "Need to drop %d bytes of a broken packet.\n",
177 i - 1);
178 DBG(KERN_INFO "check: len=%d, b[%d]=0x%02x\n",
179 packet_len, i, mouse->buf[i]);
180 return i - 1;
181 }
182 }
183
184 return 0;
185}
186
187static inline int vsxxxaa_smells_like_packet(struct vsxxxaa *mouse,
188 unsigned char type, size_t len)
189{
190 return mouse->count >= len && MATCH_PACKET_TYPE(mouse->buf[0], type);
191}
192
193static void vsxxxaa_handle_REL_packet(struct vsxxxaa *mouse)
194{
195 struct input_dev *dev = mouse->dev;
196 unsigned char *buf = mouse->buf;
197 int left, middle, right;
198 int dx, dy;
199
200 /*
201 * Check for normal stream packets. This is three bytes,
202 * with the first byte's 3 MSB set to 100.
203 *
204 * [0]: 1 0 0 SignX SignY Left Middle Right
205 * [1]: 0 dx dx dx dx dx dx dx
206 * [2]: 0 dy dy dy dy dy dy dy
207 */
208
209 /*
210 * Low 7 bit of byte 1 are abs(dx), bit 7 is
211 * 0, bit 4 of byte 0 is direction.
212 */
213 dx = buf[1] & 0x7f;
214 dx *= ((buf[0] >> 4) & 0x01) ? 1 : -1;
215
216 /*
217 * Low 7 bit of byte 2 are abs(dy), bit 7 is
218 * 0, bit 3 of byte 0 is direction.
219 */
220 dy = buf[2] & 0x7f;
221 dy *= ((buf[0] >> 3) & 0x01) ? -1 : 1;
222
223 /*
224 * Get button state. It's the low three bits
225 * (for three buttons) of byte 0.
226 */
227 left = buf[0] & 0x04;
228 middle = buf[0] & 0x02;
229 right = buf[0] & 0x01;
230
231 vsxxxaa_drop_bytes(mouse, 3);
232
233 DBG(KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
234 mouse->name, mouse->phys, dx, dy,
235 left ? "L" : "l", middle ? "M" : "m", right ? "R" : "r");
236
237 /*
238 * Report what we've found so far...
239 */
240 input_report_key(dev, BTN_LEFT, left);
241 input_report_key(dev, BTN_MIDDLE, middle);
242 input_report_key(dev, BTN_RIGHT, right);
243 input_report_key(dev, BTN_TOUCH, 0);
244 input_report_rel(dev, REL_X, dx);
245 input_report_rel(dev, REL_Y, dy);
246 input_sync(dev);
247}
248
249static void vsxxxaa_handle_ABS_packet(struct vsxxxaa *mouse)
250{
251 struct input_dev *dev = mouse->dev;
252 unsigned char *buf = mouse->buf;
253 int left, middle, right, touch;
254 int x, y;
255
256 /*
257 * Tablet position / button packet
258 *
259 * [0]: 1 1 0 B4 B3 B2 B1 Pr
260 * [1]: 0 0 X5 X4 X3 X2 X1 X0
261 * [2]: 0 0 X11 X10 X9 X8 X7 X6
262 * [3]: 0 0 Y5 Y4 Y3 Y2 Y1 Y0
263 * [4]: 0 0 Y11 Y10 Y9 Y8 Y7 Y6
264 */
265
266 /*
267 * Get X/Y position. Y axis needs to be inverted since VSXXX-AB
268 * counts down->top while monitor counts top->bottom.
269 */
270 x = ((buf[2] & 0x3f) << 6) | (buf[1] & 0x3f);
271 y = ((buf[4] & 0x3f) << 6) | (buf[3] & 0x3f);
272 y = 1023 - y;
273
274 /*
275 * Get button state. It's bits <4..1> of byte 0.
276 */
277 left = buf[0] & 0x02;
278 middle = buf[0] & 0x04;
279 right = buf[0] & 0x08;
280 touch = buf[0] & 0x10;
281
282 vsxxxaa_drop_bytes(mouse, 5);
283
284 DBG(KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
285 mouse->name, mouse->phys, x, y,
286 left ? "L" : "l", middle ? "M" : "m",
287 right ? "R" : "r", touch ? "T" : "t");
288
289 /*
290 * Report what we've found so far...
291 */
292 input_report_key(dev, BTN_LEFT, left);
293 input_report_key(dev, BTN_MIDDLE, middle);
294 input_report_key(dev, BTN_RIGHT, right);
295 input_report_key(dev, BTN_TOUCH, touch);
296 input_report_abs(dev, ABS_X, x);
297 input_report_abs(dev, ABS_Y, y);
298 input_sync(dev);
299}
300
301static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
302{
303 struct input_dev *dev = mouse->dev;
304 unsigned char *buf = mouse->buf;
305 int left, middle, right;
306 unsigned char error;
307
308 /*
309 * Check for Power-On-Reset packets. These are sent out
310 * after plugging the mouse in, or when explicitly
311 * requested by sending 'T'.
312 *
313 * [0]: 1 0 1 0 R3 R2 R1 R0
314 * [1]: 0 M2 M1 M0 D3 D2 D1 D0
315 * [2]: 0 E6 E5 E4 E3 E2 E1 E0
316 * [3]: 0 0 0 0 0 Left Middle Right
317 *
318 * M: manufacturer location code
319 * R: revision code
320 * E: Error code. If it's in the range of 0x00..0x1f, only some
321 * minor problem occurred. Errors >= 0x20 are considered bad
322 * and the device may not work properly...
323 * D: <0010> == mouse, <0100> == tablet
324 */
325
326 mouse->version = buf[0] & 0x0f;
327 mouse->country = (buf[1] >> 4) & 0x07;
328 mouse->type = buf[1] & 0x0f;
329 error = buf[2] & 0x7f;
330
331 /*
332 * Get button state. It's the low three bits
333 * (for three buttons) of byte 0. Maybe even the bit <3>
334 * has some meaning if a tablet is attached.
335 */
336 left = buf[0] & 0x04;
337 middle = buf[0] & 0x02;
338 right = buf[0] & 0x01;
339
340 vsxxxaa_drop_bytes(mouse, 4);
341 vsxxxaa_detection_done(mouse);
342
343 if (error <= 0x1f) {
344 /* No (serious) error. Report buttons */
345 input_report_key(dev, BTN_LEFT, left);
346 input_report_key(dev, BTN_MIDDLE, middle);
347 input_report_key(dev, BTN_RIGHT, right);
348 input_report_key(dev, BTN_TOUCH, 0);
349 input_sync(dev);
350
351 if (error != 0)
352 printk(KERN_INFO "Your %s on %s reports error=0x%02x\n",
353 mouse->name, mouse->phys, error);
354
355 }
356
357 /*
358 * If the mouse was hot-plugged, we need to force differential mode
359 * now... However, give it a second to recover from it's reset.
360 */
361 printk(KERN_NOTICE
362 "%s on %s: Forcing standard packet format, "
363 "incremental streaming mode and 72 samples/sec\n",
364 mouse->name, mouse->phys);
365 serio_write(mouse->serio, 'S'); /* Standard format */
366 mdelay(50);
367 serio_write(mouse->serio, 'R'); /* Incremental */
368 mdelay(50);
369 serio_write(mouse->serio, 'L'); /* 72 samples/sec */
370}
371
372static void vsxxxaa_parse_buffer(struct vsxxxaa *mouse)
373{
374 unsigned char *buf = mouse->buf;
375 int stray_bytes;
376
377 /*
378 * Parse buffer to death...
379 */
380 do {
381 /*
382 * Out of sync? Throw away what we don't understand. Each
383 * packet starts with a byte whose bit 7 is set. Unhandled
384 * packets (ie. which we don't know about or simply b0rk3d
385 * data...) will get shifted out of the buffer after some
386 * activity on the mouse.
387 */
388 while (mouse->count > 0 && !IS_HDR_BYTE(buf[0])) {
389 printk(KERN_ERR "%s on %s: Dropping a byte to regain "
390 "sync with mouse data stream...\n",
391 mouse->name, mouse->phys);
392 vsxxxaa_drop_bytes(mouse, 1);
393 }
394
395 /*
396 * Check for packets we know about.
397 */
398
399 if (vsxxxaa_smells_like_packet(mouse, VSXXXAA_PACKET_REL, 3)) {
400 /* Check for broken packet */
401 stray_bytes = vsxxxaa_check_packet(mouse, 3);
402 if (!stray_bytes)
403 vsxxxaa_handle_REL_packet(mouse);
404
405 } else if (vsxxxaa_smells_like_packet(mouse,
406 VSXXXAA_PACKET_ABS, 5)) {
407 /* Check for broken packet */
408 stray_bytes = vsxxxaa_check_packet(mouse, 5);
409 if (!stray_bytes)
410 vsxxxaa_handle_ABS_packet(mouse);
411
412 } else if (vsxxxaa_smells_like_packet(mouse,
413 VSXXXAA_PACKET_POR, 4)) {
414 /* Check for broken packet */
415 stray_bytes = vsxxxaa_check_packet(mouse, 4);
416 if (!stray_bytes)
417 vsxxxaa_handle_POR_packet(mouse);
418
419 } else {
420 break; /* No REL, ABS or POR packet found */
421 }
422
423 if (stray_bytes > 0) {
424 printk(KERN_ERR "Dropping %d bytes now...\n",
425 stray_bytes);
426 vsxxxaa_drop_bytes(mouse, stray_bytes);
427 }
428
429 } while (1);
430}
431
432static irqreturn_t vsxxxaa_interrupt(struct serio *serio,
433 unsigned char data, unsigned int flags)
434{
435 struct vsxxxaa *mouse = serio_get_drvdata(serio);
436
437 vsxxxaa_queue_byte(mouse, data);
438 vsxxxaa_parse_buffer(mouse);
439
440 return IRQ_HANDLED;
441}
442
443static void vsxxxaa_disconnect(struct serio *serio)
444{
445 struct vsxxxaa *mouse = serio_get_drvdata(serio);
446
447 serio_close(serio);
448 serio_set_drvdata(serio, NULL);
449 input_unregister_device(mouse->dev);
450 kfree(mouse);
451}
452
453static int vsxxxaa_connect(struct serio *serio, struct serio_driver *drv)
454{
455 struct vsxxxaa *mouse;
456 struct input_dev *input_dev;
457 int err = -ENOMEM;
458
459 mouse = kzalloc(sizeof(struct vsxxxaa), GFP_KERNEL);
460 input_dev = input_allocate_device();
461 if (!mouse || !input_dev)
462 goto fail1;
463
464 mouse->dev = input_dev;
465 mouse->serio = serio;
466 strlcat(mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer",
467 sizeof(mouse->name));
468 snprintf(mouse->phys, sizeof(mouse->phys), "%s/input0", serio->phys);
469
470 input_dev->name = mouse->name;
471 input_dev->phys = mouse->phys;
472 input_dev->id.bustype = BUS_RS232;
473 input_dev->dev.parent = &serio->dev;
474
475 __set_bit(EV_KEY, input_dev->evbit); /* We have buttons */
476 __set_bit(EV_REL, input_dev->evbit);
477 __set_bit(EV_ABS, input_dev->evbit);
478 __set_bit(BTN_LEFT, input_dev->keybit); /* We have 3 buttons */
479 __set_bit(BTN_MIDDLE, input_dev->keybit);
480 __set_bit(BTN_RIGHT, input_dev->keybit);
481 __set_bit(BTN_TOUCH, input_dev->keybit); /* ...and Tablet */
482 __set_bit(REL_X, input_dev->relbit);
483 __set_bit(REL_Y, input_dev->relbit);
484 input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
485 input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
486
487 serio_set_drvdata(serio, mouse);
488
489 err = serio_open(serio, drv);
490 if (err)
491 goto fail2;
492
493 /*
494 * Request selftest. Standard packet format and differential
495 * mode will be requested after the device ID'ed successfully.
496 */
497 serio_write(serio, 'T'); /* Test */
498
499 err = input_register_device(input_dev);
500 if (err)
501 goto fail3;
502
503 return 0;
504
505 fail3: serio_close(serio);
506 fail2: serio_set_drvdata(serio, NULL);
507 fail1: input_free_device(input_dev);
508 kfree(mouse);
509 return err;
510}
511
512static struct serio_device_id vsxxaa_serio_ids[] = {
513 {
514 .type = SERIO_RS232,
515 .proto = SERIO_VSXXXAA,
516 .id = SERIO_ANY,
517 .extra = SERIO_ANY,
518 },
519 { 0 }
520};
521
522MODULE_DEVICE_TABLE(serio, vsxxaa_serio_ids);
523
524static struct serio_driver vsxxxaa_drv = {
525 .driver = {
526 .name = "vsxxxaa",
527 },
528 .description = DRIVER_DESC,
529 .id_table = vsxxaa_serio_ids,
530 .connect = vsxxxaa_connect,
531 .interrupt = vsxxxaa_interrupt,
532 .disconnect = vsxxxaa_disconnect,
533};
534
535module_serio_driver(vsxxxaa_drv);