Loading...
1/*
2 asb100.c - Part of lm_sensors, Linux kernel modules for hardware
3 monitoring
4
5 Copyright (C) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
6
7 (derived from w83781d.c)
8
9 Copyright (C) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>,
10 Philip Edelbrock <phil@netroedge.com>, and
11 Mark Studebaker <mdsxyz123@yahoo.com>
12
13 This program is free software; you can redistribute it and/or modify
14 it under the terms of the GNU General Public License as published by
15 the Free Software Foundation; either version 2 of the License, or
16 (at your option) any later version.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 You should have received a copy of the GNU General Public License
24 along with this program; if not, write to the Free Software
25 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26*/
27
28/*
29 This driver supports the hardware sensor chips: Asus ASB100 and
30 ASB100-A "BACH".
31
32 ASB100-A supports pwm1, while plain ASB100 does not. There is no known
33 way for the driver to tell which one is there.
34
35 Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
36 asb100 7 3 1 4 0x31 0x0694 yes no
37*/
38
39#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
40
41#include <linux/module.h>
42#include <linux/slab.h>
43#include <linux/i2c.h>
44#include <linux/hwmon.h>
45#include <linux/hwmon-sysfs.h>
46#include <linux/hwmon-vid.h>
47#include <linux/err.h>
48#include <linux/init.h>
49#include <linux/jiffies.h>
50#include <linux/mutex.h>
51#include "lm75.h"
52
53/* I2C addresses to scan */
54static const unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
55
56static unsigned short force_subclients[4];
57module_param_array(force_subclients, short, NULL, 0);
58MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
59 "{bus, clientaddr, subclientaddr1, subclientaddr2}");
60
61/* Voltage IN registers 0-6 */
62#define ASB100_REG_IN(nr) (0x20 + (nr))
63#define ASB100_REG_IN_MAX(nr) (0x2b + (nr * 2))
64#define ASB100_REG_IN_MIN(nr) (0x2c + (nr * 2))
65
66/* FAN IN registers 1-3 */
67#define ASB100_REG_FAN(nr) (0x28 + (nr))
68#define ASB100_REG_FAN_MIN(nr) (0x3b + (nr))
69
70/* TEMPERATURE registers 1-4 */
71static const u16 asb100_reg_temp[] = {0, 0x27, 0x150, 0x250, 0x17};
72static const u16 asb100_reg_temp_max[] = {0, 0x39, 0x155, 0x255, 0x18};
73static const u16 asb100_reg_temp_hyst[] = {0, 0x3a, 0x153, 0x253, 0x19};
74
75#define ASB100_REG_TEMP(nr) (asb100_reg_temp[nr])
76#define ASB100_REG_TEMP_MAX(nr) (asb100_reg_temp_max[nr])
77#define ASB100_REG_TEMP_HYST(nr) (asb100_reg_temp_hyst[nr])
78
79#define ASB100_REG_TEMP2_CONFIG 0x0152
80#define ASB100_REG_TEMP3_CONFIG 0x0252
81
82
83#define ASB100_REG_CONFIG 0x40
84#define ASB100_REG_ALARM1 0x41
85#define ASB100_REG_ALARM2 0x42
86#define ASB100_REG_SMIM1 0x43
87#define ASB100_REG_SMIM2 0x44
88#define ASB100_REG_VID_FANDIV 0x47
89#define ASB100_REG_I2C_ADDR 0x48
90#define ASB100_REG_CHIPID 0x49
91#define ASB100_REG_I2C_SUBADDR 0x4a
92#define ASB100_REG_PIN 0x4b
93#define ASB100_REG_IRQ 0x4c
94#define ASB100_REG_BANK 0x4e
95#define ASB100_REG_CHIPMAN 0x4f
96
97#define ASB100_REG_WCHIPID 0x58
98
99/* bit 7 -> enable, bits 0-3 -> duty cycle */
100#define ASB100_REG_PWM1 0x59
101
102/* CONVERSIONS
103 Rounding and limit checking is only done on the TO_REG variants. */
104
105/* These constants are a guess, consistent w/ w83781d */
106#define ASB100_IN_MIN ( 0)
107#define ASB100_IN_MAX (4080)
108
109/* IN: 1/1000 V (0V to 4.08V)
110 REG: 16mV/bit */
111static u8 IN_TO_REG(unsigned val)
112{
113 unsigned nval = SENSORS_LIMIT(val, ASB100_IN_MIN, ASB100_IN_MAX);
114 return (nval + 8) / 16;
115}
116
117static unsigned IN_FROM_REG(u8 reg)
118{
119 return reg * 16;
120}
121
122static u8 FAN_TO_REG(long rpm, int div)
123{
124 if (rpm == -1)
125 return 0;
126 if (rpm == 0)
127 return 255;
128 rpm = SENSORS_LIMIT(rpm, 1, 1000000);
129 return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
130}
131
132static int FAN_FROM_REG(u8 val, int div)
133{
134 return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
135}
136
137/* These constants are a guess, consistent w/ w83781d */
138#define ASB100_TEMP_MIN (-128000)
139#define ASB100_TEMP_MAX ( 127000)
140
141/* TEMP: 0.001C/bit (-128C to +127C)
142 REG: 1C/bit, two's complement */
143static u8 TEMP_TO_REG(long temp)
144{
145 int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
146 ntemp += (ntemp<0 ? -500 : 500);
147 return (u8)(ntemp / 1000);
148}
149
150static int TEMP_FROM_REG(u8 reg)
151{
152 return (s8)reg * 1000;
153}
154
155/* PWM: 0 - 255 per sensors documentation
156 REG: (6.25% duty cycle per bit) */
157static u8 ASB100_PWM_TO_REG(int pwm)
158{
159 pwm = SENSORS_LIMIT(pwm, 0, 255);
160 return (u8)(pwm / 16);
161}
162
163static int ASB100_PWM_FROM_REG(u8 reg)
164{
165 return reg * 16;
166}
167
168#define DIV_FROM_REG(val) (1 << (val))
169
170/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
171 REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */
172static u8 DIV_TO_REG(long val)
173{
174 return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1;
175}
176
177/* For each registered client, we need to keep some data in memory. That
178 data is pointed to by client->data. The structure itself is
179 dynamically allocated, at the same time the client itself is allocated. */
180struct asb100_data {
181 struct device *hwmon_dev;
182 struct mutex lock;
183
184 struct mutex update_lock;
185 unsigned long last_updated; /* In jiffies */
186
187 /* array of 2 pointers to subclients */
188 struct i2c_client *lm75[2];
189
190 char valid; /* !=0 if following fields are valid */
191 u8 in[7]; /* Register value */
192 u8 in_max[7]; /* Register value */
193 u8 in_min[7]; /* Register value */
194 u8 fan[3]; /* Register value */
195 u8 fan_min[3]; /* Register value */
196 u16 temp[4]; /* Register value (0 and 3 are u8 only) */
197 u16 temp_max[4]; /* Register value (0 and 3 are u8 only) */
198 u16 temp_hyst[4]; /* Register value (0 and 3 are u8 only) */
199 u8 fan_div[3]; /* Register encoding, right justified */
200 u8 pwm; /* Register encoding */
201 u8 vid; /* Register encoding, combined */
202 u32 alarms; /* Register encoding, combined */
203 u8 vrm;
204};
205
206static int asb100_read_value(struct i2c_client *client, u16 reg);
207static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val);
208
209static int asb100_probe(struct i2c_client *client,
210 const struct i2c_device_id *id);
211static int asb100_detect(struct i2c_client *client,
212 struct i2c_board_info *info);
213static int asb100_remove(struct i2c_client *client);
214static struct asb100_data *asb100_update_device(struct device *dev);
215static void asb100_init_client(struct i2c_client *client);
216
217static const struct i2c_device_id asb100_id[] = {
218 { "asb100", 0 },
219 { }
220};
221MODULE_DEVICE_TABLE(i2c, asb100_id);
222
223static struct i2c_driver asb100_driver = {
224 .class = I2C_CLASS_HWMON,
225 .driver = {
226 .name = "asb100",
227 },
228 .probe = asb100_probe,
229 .remove = asb100_remove,
230 .id_table = asb100_id,
231 .detect = asb100_detect,
232 .address_list = normal_i2c,
233};
234
235/* 7 Voltages */
236#define show_in_reg(reg) \
237static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
238 char *buf) \
239{ \
240 int nr = to_sensor_dev_attr(attr)->index; \
241 struct asb100_data *data = asb100_update_device(dev); \
242 return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \
243}
244
245show_in_reg(in)
246show_in_reg(in_min)
247show_in_reg(in_max)
248
249#define set_in_reg(REG, reg) \
250static ssize_t set_in_##reg(struct device *dev, struct device_attribute *attr, \
251 const char *buf, size_t count) \
252{ \
253 int nr = to_sensor_dev_attr(attr)->index; \
254 struct i2c_client *client = to_i2c_client(dev); \
255 struct asb100_data *data = i2c_get_clientdata(client); \
256 unsigned long val = simple_strtoul(buf, NULL, 10); \
257 \
258 mutex_lock(&data->update_lock); \
259 data->in_##reg[nr] = IN_TO_REG(val); \
260 asb100_write_value(client, ASB100_REG_IN_##REG(nr), \
261 data->in_##reg[nr]); \
262 mutex_unlock(&data->update_lock); \
263 return count; \
264}
265
266set_in_reg(MIN, min)
267set_in_reg(MAX, max)
268
269#define sysfs_in(offset) \
270static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
271 show_in, NULL, offset); \
272static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
273 show_in_min, set_in_min, offset); \
274static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
275 show_in_max, set_in_max, offset)
276
277sysfs_in(0);
278sysfs_in(1);
279sysfs_in(2);
280sysfs_in(3);
281sysfs_in(4);
282sysfs_in(5);
283sysfs_in(6);
284
285/* 3 Fans */
286static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
287 char *buf)
288{
289 int nr = to_sensor_dev_attr(attr)->index;
290 struct asb100_data *data = asb100_update_device(dev);
291 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
292 DIV_FROM_REG(data->fan_div[nr])));
293}
294
295static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
296 char *buf)
297{
298 int nr = to_sensor_dev_attr(attr)->index;
299 struct asb100_data *data = asb100_update_device(dev);
300 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
301 DIV_FROM_REG(data->fan_div[nr])));
302}
303
304static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
305 char *buf)
306{
307 int nr = to_sensor_dev_attr(attr)->index;
308 struct asb100_data *data = asb100_update_device(dev);
309 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
310}
311
312static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
313 const char *buf, size_t count)
314{
315 int nr = to_sensor_dev_attr(attr)->index;
316 struct i2c_client *client = to_i2c_client(dev);
317 struct asb100_data *data = i2c_get_clientdata(client);
318 u32 val = simple_strtoul(buf, NULL, 10);
319
320 mutex_lock(&data->update_lock);
321 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
322 asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
323 mutex_unlock(&data->update_lock);
324 return count;
325}
326
327/* Note: we save and restore the fan minimum here, because its value is
328 determined in part by the fan divisor. This follows the principle of
329 least surprise; the user doesn't expect the fan minimum to change just
330 because the divisor changed. */
331static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
332 const char *buf, size_t count)
333{
334 int nr = to_sensor_dev_attr(attr)->index;
335 struct i2c_client *client = to_i2c_client(dev);
336 struct asb100_data *data = i2c_get_clientdata(client);
337 unsigned long min;
338 unsigned long val = simple_strtoul(buf, NULL, 10);
339 int reg;
340
341 mutex_lock(&data->update_lock);
342
343 min = FAN_FROM_REG(data->fan_min[nr],
344 DIV_FROM_REG(data->fan_div[nr]));
345 data->fan_div[nr] = DIV_TO_REG(val);
346
347 switch (nr) {
348 case 0: /* fan 1 */
349 reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
350 reg = (reg & 0xcf) | (data->fan_div[0] << 4);
351 asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
352 break;
353
354 case 1: /* fan 2 */
355 reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
356 reg = (reg & 0x3f) | (data->fan_div[1] << 6);
357 asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
358 break;
359
360 case 2: /* fan 3 */
361 reg = asb100_read_value(client, ASB100_REG_PIN);
362 reg = (reg & 0x3f) | (data->fan_div[2] << 6);
363 asb100_write_value(client, ASB100_REG_PIN, reg);
364 break;
365 }
366
367 data->fan_min[nr] =
368 FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
369 asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
370
371 mutex_unlock(&data->update_lock);
372
373 return count;
374}
375
376#define sysfs_fan(offset) \
377static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
378 show_fan, NULL, offset - 1); \
379static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
380 show_fan_min, set_fan_min, offset - 1); \
381static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
382 show_fan_div, set_fan_div, offset - 1)
383
384sysfs_fan(1);
385sysfs_fan(2);
386sysfs_fan(3);
387
388/* 4 Temp. Sensors */
389static int sprintf_temp_from_reg(u16 reg, char *buf, int nr)
390{
391 int ret = 0;
392
393 switch (nr) {
394 case 1: case 2:
395 ret = sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(reg));
396 break;
397 case 0: case 3: default:
398 ret = sprintf(buf, "%d\n", TEMP_FROM_REG(reg));
399 break;
400 }
401 return ret;
402}
403
404#define show_temp_reg(reg) \
405static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
406 char *buf) \
407{ \
408 int nr = to_sensor_dev_attr(attr)->index; \
409 struct asb100_data *data = asb100_update_device(dev); \
410 return sprintf_temp_from_reg(data->reg[nr], buf, nr); \
411}
412
413show_temp_reg(temp);
414show_temp_reg(temp_max);
415show_temp_reg(temp_hyst);
416
417#define set_temp_reg(REG, reg) \
418static ssize_t set_##reg(struct device *dev, struct device_attribute *attr, \
419 const char *buf, size_t count) \
420{ \
421 int nr = to_sensor_dev_attr(attr)->index; \
422 struct i2c_client *client = to_i2c_client(dev); \
423 struct asb100_data *data = i2c_get_clientdata(client); \
424 long val = simple_strtol(buf, NULL, 10); \
425 \
426 mutex_lock(&data->update_lock); \
427 switch (nr) { \
428 case 1: case 2: \
429 data->reg[nr] = LM75_TEMP_TO_REG(val); \
430 break; \
431 case 0: case 3: default: \
432 data->reg[nr] = TEMP_TO_REG(val); \
433 break; \
434 } \
435 asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \
436 data->reg[nr]); \
437 mutex_unlock(&data->update_lock); \
438 return count; \
439}
440
441set_temp_reg(MAX, temp_max);
442set_temp_reg(HYST, temp_hyst);
443
444#define sysfs_temp(num) \
445static SENSOR_DEVICE_ATTR(temp##num##_input, S_IRUGO, \
446 show_temp, NULL, num - 1); \
447static SENSOR_DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \
448 show_temp_max, set_temp_max, num - 1); \
449static SENSOR_DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \
450 show_temp_hyst, set_temp_hyst, num - 1)
451
452sysfs_temp(1);
453sysfs_temp(2);
454sysfs_temp(3);
455sysfs_temp(4);
456
457/* VID */
458static ssize_t show_vid(struct device *dev, struct device_attribute *attr,
459 char *buf)
460{
461 struct asb100_data *data = asb100_update_device(dev);
462 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
463}
464
465static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
466
467/* VRM */
468static ssize_t show_vrm(struct device *dev, struct device_attribute *attr,
469 char *buf)
470{
471 struct asb100_data *data = dev_get_drvdata(dev);
472 return sprintf(buf, "%d\n", data->vrm);
473}
474
475static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
476 const char *buf, size_t count)
477{
478 struct asb100_data *data = dev_get_drvdata(dev);
479 data->vrm = simple_strtoul(buf, NULL, 10);
480 return count;
481}
482
483/* Alarms */
484static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
485
486static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
487 char *buf)
488{
489 struct asb100_data *data = asb100_update_device(dev);
490 return sprintf(buf, "%u\n", data->alarms);
491}
492
493static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
494
495static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
496 char *buf)
497{
498 int bitnr = to_sensor_dev_attr(attr)->index;
499 struct asb100_data *data = asb100_update_device(dev);
500 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
501}
502static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
503static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
504static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
505static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
506static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
507static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
508static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
509static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
510static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
511static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
512static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13);
513
514/* 1 PWM */
515static ssize_t show_pwm1(struct device *dev, struct device_attribute *attr,
516 char *buf)
517{
518 struct asb100_data *data = asb100_update_device(dev);
519 return sprintf(buf, "%d\n", ASB100_PWM_FROM_REG(data->pwm & 0x0f));
520}
521
522static ssize_t set_pwm1(struct device *dev, struct device_attribute *attr,
523 const char *buf, size_t count)
524{
525 struct i2c_client *client = to_i2c_client(dev);
526 struct asb100_data *data = i2c_get_clientdata(client);
527 unsigned long val = simple_strtoul(buf, NULL, 10);
528
529 mutex_lock(&data->update_lock);
530 data->pwm &= 0x80; /* keep the enable bit */
531 data->pwm |= (0x0f & ASB100_PWM_TO_REG(val));
532 asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
533 mutex_unlock(&data->update_lock);
534 return count;
535}
536
537static ssize_t show_pwm_enable1(struct device *dev,
538 struct device_attribute *attr, char *buf)
539{
540 struct asb100_data *data = asb100_update_device(dev);
541 return sprintf(buf, "%d\n", (data->pwm & 0x80) ? 1 : 0);
542}
543
544static ssize_t set_pwm_enable1(struct device *dev,
545 struct device_attribute *attr, const char *buf, size_t count)
546{
547 struct i2c_client *client = to_i2c_client(dev);
548 struct asb100_data *data = i2c_get_clientdata(client);
549 unsigned long val = simple_strtoul(buf, NULL, 10);
550
551 mutex_lock(&data->update_lock);
552 data->pwm &= 0x0f; /* keep the duty cycle bits */
553 data->pwm |= (val ? 0x80 : 0x00);
554 asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
555 mutex_unlock(&data->update_lock);
556 return count;
557}
558
559static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1);
560static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
561 show_pwm_enable1, set_pwm_enable1);
562
563static struct attribute *asb100_attributes[] = {
564 &sensor_dev_attr_in0_input.dev_attr.attr,
565 &sensor_dev_attr_in0_min.dev_attr.attr,
566 &sensor_dev_attr_in0_max.dev_attr.attr,
567 &sensor_dev_attr_in1_input.dev_attr.attr,
568 &sensor_dev_attr_in1_min.dev_attr.attr,
569 &sensor_dev_attr_in1_max.dev_attr.attr,
570 &sensor_dev_attr_in2_input.dev_attr.attr,
571 &sensor_dev_attr_in2_min.dev_attr.attr,
572 &sensor_dev_attr_in2_max.dev_attr.attr,
573 &sensor_dev_attr_in3_input.dev_attr.attr,
574 &sensor_dev_attr_in3_min.dev_attr.attr,
575 &sensor_dev_attr_in3_max.dev_attr.attr,
576 &sensor_dev_attr_in4_input.dev_attr.attr,
577 &sensor_dev_attr_in4_min.dev_attr.attr,
578 &sensor_dev_attr_in4_max.dev_attr.attr,
579 &sensor_dev_attr_in5_input.dev_attr.attr,
580 &sensor_dev_attr_in5_min.dev_attr.attr,
581 &sensor_dev_attr_in5_max.dev_attr.attr,
582 &sensor_dev_attr_in6_input.dev_attr.attr,
583 &sensor_dev_attr_in6_min.dev_attr.attr,
584 &sensor_dev_attr_in6_max.dev_attr.attr,
585
586 &sensor_dev_attr_fan1_input.dev_attr.attr,
587 &sensor_dev_attr_fan1_min.dev_attr.attr,
588 &sensor_dev_attr_fan1_div.dev_attr.attr,
589 &sensor_dev_attr_fan2_input.dev_attr.attr,
590 &sensor_dev_attr_fan2_min.dev_attr.attr,
591 &sensor_dev_attr_fan2_div.dev_attr.attr,
592 &sensor_dev_attr_fan3_input.dev_attr.attr,
593 &sensor_dev_attr_fan3_min.dev_attr.attr,
594 &sensor_dev_attr_fan3_div.dev_attr.attr,
595
596 &sensor_dev_attr_temp1_input.dev_attr.attr,
597 &sensor_dev_attr_temp1_max.dev_attr.attr,
598 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
599 &sensor_dev_attr_temp2_input.dev_attr.attr,
600 &sensor_dev_attr_temp2_max.dev_attr.attr,
601 &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
602 &sensor_dev_attr_temp3_input.dev_attr.attr,
603 &sensor_dev_attr_temp3_max.dev_attr.attr,
604 &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
605 &sensor_dev_attr_temp4_input.dev_attr.attr,
606 &sensor_dev_attr_temp4_max.dev_attr.attr,
607 &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
608
609 &sensor_dev_attr_in0_alarm.dev_attr.attr,
610 &sensor_dev_attr_in1_alarm.dev_attr.attr,
611 &sensor_dev_attr_in2_alarm.dev_attr.attr,
612 &sensor_dev_attr_in3_alarm.dev_attr.attr,
613 &sensor_dev_attr_in4_alarm.dev_attr.attr,
614 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
615 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
616 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
617 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
618 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
619 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
620
621 &dev_attr_cpu0_vid.attr,
622 &dev_attr_vrm.attr,
623 &dev_attr_alarms.attr,
624 &dev_attr_pwm1.attr,
625 &dev_attr_pwm1_enable.attr,
626
627 NULL
628};
629
630static const struct attribute_group asb100_group = {
631 .attrs = asb100_attributes,
632};
633
634static int asb100_detect_subclients(struct i2c_client *client)
635{
636 int i, id, err;
637 int address = client->addr;
638 unsigned short sc_addr[2];
639 struct asb100_data *data = i2c_get_clientdata(client);
640 struct i2c_adapter *adapter = client->adapter;
641
642 id = i2c_adapter_id(adapter);
643
644 if (force_subclients[0] == id && force_subclients[1] == address) {
645 for (i = 2; i <= 3; i++) {
646 if (force_subclients[i] < 0x48 ||
647 force_subclients[i] > 0x4f) {
648 dev_err(&client->dev, "invalid subclient "
649 "address %d; must be 0x48-0x4f\n",
650 force_subclients[i]);
651 err = -ENODEV;
652 goto ERROR_SC_2;
653 }
654 }
655 asb100_write_value(client, ASB100_REG_I2C_SUBADDR,
656 (force_subclients[2] & 0x07) |
657 ((force_subclients[3] & 0x07) << 4));
658 sc_addr[0] = force_subclients[2];
659 sc_addr[1] = force_subclients[3];
660 } else {
661 int val = asb100_read_value(client, ASB100_REG_I2C_SUBADDR);
662 sc_addr[0] = 0x48 + (val & 0x07);
663 sc_addr[1] = 0x48 + ((val >> 4) & 0x07);
664 }
665
666 if (sc_addr[0] == sc_addr[1]) {
667 dev_err(&client->dev, "duplicate addresses 0x%x "
668 "for subclients\n", sc_addr[0]);
669 err = -ENODEV;
670 goto ERROR_SC_2;
671 }
672
673 data->lm75[0] = i2c_new_dummy(adapter, sc_addr[0]);
674 if (!data->lm75[0]) {
675 dev_err(&client->dev, "subclient %d registration "
676 "at address 0x%x failed.\n", 1, sc_addr[0]);
677 err = -ENOMEM;
678 goto ERROR_SC_2;
679 }
680
681 data->lm75[1] = i2c_new_dummy(adapter, sc_addr[1]);
682 if (!data->lm75[1]) {
683 dev_err(&client->dev, "subclient %d registration "
684 "at address 0x%x failed.\n", 2, sc_addr[1]);
685 err = -ENOMEM;
686 goto ERROR_SC_3;
687 }
688
689 return 0;
690
691/* Undo inits in case of errors */
692ERROR_SC_3:
693 i2c_unregister_device(data->lm75[0]);
694ERROR_SC_2:
695 return err;
696}
697
698/* Return 0 if detection is successful, -ENODEV otherwise */
699static int asb100_detect(struct i2c_client *client,
700 struct i2c_board_info *info)
701{
702 struct i2c_adapter *adapter = client->adapter;
703 int val1, val2;
704
705 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
706 pr_debug("detect failed, smbus byte data not supported!\n");
707 return -ENODEV;
708 }
709
710 val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
711 val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
712
713 /* If we're in bank 0 */
714 if ((!(val1 & 0x07)) &&
715 /* Check for ASB100 ID (low byte) */
716 (((!(val1 & 0x80)) && (val2 != 0x94)) ||
717 /* Check for ASB100 ID (high byte ) */
718 ((val1 & 0x80) && (val2 != 0x06)))) {
719 pr_debug("detect failed, bad chip id 0x%02x!\n", val2);
720 return -ENODEV;
721 }
722
723 /* Put it now into bank 0 and Vendor ID High Byte */
724 i2c_smbus_write_byte_data(client, ASB100_REG_BANK,
725 (i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78)
726 | 0x80);
727
728 /* Determine the chip type. */
729 val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
730 val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
731
732 if (val1 != 0x31 || val2 != 0x06)
733 return -ENODEV;
734
735 strlcpy(info->type, "asb100", I2C_NAME_SIZE);
736
737 return 0;
738}
739
740static int asb100_probe(struct i2c_client *client,
741 const struct i2c_device_id *id)
742{
743 int err;
744 struct asb100_data *data;
745
746 data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL);
747 if (!data) {
748 pr_debug("probe failed, kzalloc failed!\n");
749 err = -ENOMEM;
750 goto ERROR0;
751 }
752
753 i2c_set_clientdata(client, data);
754 mutex_init(&data->lock);
755 mutex_init(&data->update_lock);
756
757 /* Attach secondary lm75 clients */
758 err = asb100_detect_subclients(client);
759 if (err)
760 goto ERROR1;
761
762 /* Initialize the chip */
763 asb100_init_client(client);
764
765 /* A few vars need to be filled upon startup */
766 data->fan_min[0] = asb100_read_value(client, ASB100_REG_FAN_MIN(0));
767 data->fan_min[1] = asb100_read_value(client, ASB100_REG_FAN_MIN(1));
768 data->fan_min[2] = asb100_read_value(client, ASB100_REG_FAN_MIN(2));
769
770 /* Register sysfs hooks */
771 if ((err = sysfs_create_group(&client->dev.kobj, &asb100_group)))
772 goto ERROR3;
773
774 data->hwmon_dev = hwmon_device_register(&client->dev);
775 if (IS_ERR(data->hwmon_dev)) {
776 err = PTR_ERR(data->hwmon_dev);
777 goto ERROR4;
778 }
779
780 return 0;
781
782ERROR4:
783 sysfs_remove_group(&client->dev.kobj, &asb100_group);
784ERROR3:
785 i2c_unregister_device(data->lm75[1]);
786 i2c_unregister_device(data->lm75[0]);
787ERROR1:
788 kfree(data);
789ERROR0:
790 return err;
791}
792
793static int asb100_remove(struct i2c_client *client)
794{
795 struct asb100_data *data = i2c_get_clientdata(client);
796
797 hwmon_device_unregister(data->hwmon_dev);
798 sysfs_remove_group(&client->dev.kobj, &asb100_group);
799
800 i2c_unregister_device(data->lm75[1]);
801 i2c_unregister_device(data->lm75[0]);
802
803 kfree(data);
804
805 return 0;
806}
807
808/* The SMBus locks itself, usually, but nothing may access the chip between
809 bank switches. */
810static int asb100_read_value(struct i2c_client *client, u16 reg)
811{
812 struct asb100_data *data = i2c_get_clientdata(client);
813 struct i2c_client *cl;
814 int res, bank;
815
816 mutex_lock(&data->lock);
817
818 bank = (reg >> 8) & 0x0f;
819 if (bank > 2)
820 /* switch banks */
821 i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
822
823 if (bank == 0 || bank > 2) {
824 res = i2c_smbus_read_byte_data(client, reg & 0xff);
825 } else {
826 /* switch to subclient */
827 cl = data->lm75[bank - 1];
828
829 /* convert from ISA to LM75 I2C addresses */
830 switch (reg & 0xff) {
831 case 0x50: /* TEMP */
832 res = swab16(i2c_smbus_read_word_data(cl, 0));
833 break;
834 case 0x52: /* CONFIG */
835 res = i2c_smbus_read_byte_data(cl, 1);
836 break;
837 case 0x53: /* HYST */
838 res = swab16(i2c_smbus_read_word_data(cl, 2));
839 break;
840 case 0x55: /* MAX */
841 default:
842 res = swab16(i2c_smbus_read_word_data(cl, 3));
843 break;
844 }
845 }
846
847 if (bank > 2)
848 i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
849
850 mutex_unlock(&data->lock);
851
852 return res;
853}
854
855static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value)
856{
857 struct asb100_data *data = i2c_get_clientdata(client);
858 struct i2c_client *cl;
859 int bank;
860
861 mutex_lock(&data->lock);
862
863 bank = (reg >> 8) & 0x0f;
864 if (bank > 2)
865 /* switch banks */
866 i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
867
868 if (bank == 0 || bank > 2) {
869 i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff);
870 } else {
871 /* switch to subclient */
872 cl = data->lm75[bank - 1];
873
874 /* convert from ISA to LM75 I2C addresses */
875 switch (reg & 0xff) {
876 case 0x52: /* CONFIG */
877 i2c_smbus_write_byte_data(cl, 1, value & 0xff);
878 break;
879 case 0x53: /* HYST */
880 i2c_smbus_write_word_data(cl, 2, swab16(value));
881 break;
882 case 0x55: /* MAX */
883 i2c_smbus_write_word_data(cl, 3, swab16(value));
884 break;
885 }
886 }
887
888 if (bank > 2)
889 i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
890
891 mutex_unlock(&data->lock);
892}
893
894static void asb100_init_client(struct i2c_client *client)
895{
896 struct asb100_data *data = i2c_get_clientdata(client);
897
898 data->vrm = vid_which_vrm();
899
900 /* Start monitoring */
901 asb100_write_value(client, ASB100_REG_CONFIG,
902 (asb100_read_value(client, ASB100_REG_CONFIG) & 0xf7) | 0x01);
903}
904
905static struct asb100_data *asb100_update_device(struct device *dev)
906{
907 struct i2c_client *client = to_i2c_client(dev);
908 struct asb100_data *data = i2c_get_clientdata(client);
909 int i;
910
911 mutex_lock(&data->update_lock);
912
913 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
914 || !data->valid) {
915
916 dev_dbg(&client->dev, "starting device update...\n");
917
918 /* 7 voltage inputs */
919 for (i = 0; i < 7; i++) {
920 data->in[i] = asb100_read_value(client,
921 ASB100_REG_IN(i));
922 data->in_min[i] = asb100_read_value(client,
923 ASB100_REG_IN_MIN(i));
924 data->in_max[i] = asb100_read_value(client,
925 ASB100_REG_IN_MAX(i));
926 }
927
928 /* 3 fan inputs */
929 for (i = 0; i < 3; i++) {
930 data->fan[i] = asb100_read_value(client,
931 ASB100_REG_FAN(i));
932 data->fan_min[i] = asb100_read_value(client,
933 ASB100_REG_FAN_MIN(i));
934 }
935
936 /* 4 temperature inputs */
937 for (i = 1; i <= 4; i++) {
938 data->temp[i-1] = asb100_read_value(client,
939 ASB100_REG_TEMP(i));
940 data->temp_max[i-1] = asb100_read_value(client,
941 ASB100_REG_TEMP_MAX(i));
942 data->temp_hyst[i-1] = asb100_read_value(client,
943 ASB100_REG_TEMP_HYST(i));
944 }
945
946 /* VID and fan divisors */
947 i = asb100_read_value(client, ASB100_REG_VID_FANDIV);
948 data->vid = i & 0x0f;
949 data->vid |= (asb100_read_value(client,
950 ASB100_REG_CHIPID) & 0x01) << 4;
951 data->fan_div[0] = (i >> 4) & 0x03;
952 data->fan_div[1] = (i >> 6) & 0x03;
953 data->fan_div[2] = (asb100_read_value(client,
954 ASB100_REG_PIN) >> 6) & 0x03;
955
956 /* PWM */
957 data->pwm = asb100_read_value(client, ASB100_REG_PWM1);
958
959 /* alarms */
960 data->alarms = asb100_read_value(client, ASB100_REG_ALARM1) +
961 (asb100_read_value(client, ASB100_REG_ALARM2) << 8);
962
963 data->last_updated = jiffies;
964 data->valid = 1;
965
966 dev_dbg(&client->dev, "... device update complete\n");
967 }
968
969 mutex_unlock(&data->update_lock);
970
971 return data;
972}
973
974static int __init asb100_init(void)
975{
976 return i2c_add_driver(&asb100_driver);
977}
978
979static void __exit asb100_exit(void)
980{
981 i2c_del_driver(&asb100_driver);
982}
983
984MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
985MODULE_DESCRIPTION("ASB100 Bach driver");
986MODULE_LICENSE("GPL");
987
988module_init(asb100_init);
989module_exit(asb100_exit);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * asb100.c - Part of lm_sensors, Linux kernel modules for hardware
4 * monitoring
5 *
6 * Copyright (C) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
7 *
8 * (derived from w83781d.c)
9 *
10 * Copyright (C) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>,
11 * Philip Edelbrock <phil@netroedge.com>, and
12 * Mark Studebaker <mdsxyz123@yahoo.com>
13 */
14
15/*
16 * This driver supports the hardware sensor chips: Asus ASB100 and
17 * ASB100-A "BACH".
18 *
19 * ASB100-A supports pwm1, while plain ASB100 does not. There is no known
20 * way for the driver to tell which one is there.
21 *
22 * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
23 * asb100 7 3 1 4 0x31 0x0694 yes no
24 */
25
26#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
27
28#include <linux/module.h>
29#include <linux/slab.h>
30#include <linux/i2c.h>
31#include <linux/hwmon.h>
32#include <linux/hwmon-sysfs.h>
33#include <linux/hwmon-vid.h>
34#include <linux/err.h>
35#include <linux/init.h>
36#include <linux/jiffies.h>
37#include <linux/mutex.h>
38#include "lm75.h"
39
40/* I2C addresses to scan */
41static const unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
42
43static unsigned short force_subclients[4];
44module_param_array(force_subclients, short, NULL, 0);
45MODULE_PARM_DESC(force_subclients,
46 "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
47
48/* Voltage IN registers 0-6 */
49#define ASB100_REG_IN(nr) (0x20 + (nr))
50#define ASB100_REG_IN_MAX(nr) (0x2b + (nr * 2))
51#define ASB100_REG_IN_MIN(nr) (0x2c + (nr * 2))
52
53/* FAN IN registers 1-3 */
54#define ASB100_REG_FAN(nr) (0x28 + (nr))
55#define ASB100_REG_FAN_MIN(nr) (0x3b + (nr))
56
57/* TEMPERATURE registers 1-4 */
58static const u16 asb100_reg_temp[] = {0, 0x27, 0x150, 0x250, 0x17};
59static const u16 asb100_reg_temp_max[] = {0, 0x39, 0x155, 0x255, 0x18};
60static const u16 asb100_reg_temp_hyst[] = {0, 0x3a, 0x153, 0x253, 0x19};
61
62#define ASB100_REG_TEMP(nr) (asb100_reg_temp[nr])
63#define ASB100_REG_TEMP_MAX(nr) (asb100_reg_temp_max[nr])
64#define ASB100_REG_TEMP_HYST(nr) (asb100_reg_temp_hyst[nr])
65
66#define ASB100_REG_TEMP2_CONFIG 0x0152
67#define ASB100_REG_TEMP3_CONFIG 0x0252
68
69
70#define ASB100_REG_CONFIG 0x40
71#define ASB100_REG_ALARM1 0x41
72#define ASB100_REG_ALARM2 0x42
73#define ASB100_REG_SMIM1 0x43
74#define ASB100_REG_SMIM2 0x44
75#define ASB100_REG_VID_FANDIV 0x47
76#define ASB100_REG_I2C_ADDR 0x48
77#define ASB100_REG_CHIPID 0x49
78#define ASB100_REG_I2C_SUBADDR 0x4a
79#define ASB100_REG_PIN 0x4b
80#define ASB100_REG_IRQ 0x4c
81#define ASB100_REG_BANK 0x4e
82#define ASB100_REG_CHIPMAN 0x4f
83
84#define ASB100_REG_WCHIPID 0x58
85
86/* bit 7 -> enable, bits 0-3 -> duty cycle */
87#define ASB100_REG_PWM1 0x59
88
89/*
90 * CONVERSIONS
91 * Rounding and limit checking is only done on the TO_REG variants.
92 */
93
94/* These constants are a guess, consistent w/ w83781d */
95#define ASB100_IN_MIN 0
96#define ASB100_IN_MAX 4080
97
98/*
99 * IN: 1/1000 V (0V to 4.08V)
100 * REG: 16mV/bit
101 */
102static u8 IN_TO_REG(unsigned val)
103{
104 unsigned nval = clamp_val(val, ASB100_IN_MIN, ASB100_IN_MAX);
105 return (nval + 8) / 16;
106}
107
108static unsigned IN_FROM_REG(u8 reg)
109{
110 return reg * 16;
111}
112
113static u8 FAN_TO_REG(long rpm, int div)
114{
115 if (rpm == -1)
116 return 0;
117 if (rpm == 0)
118 return 255;
119 rpm = clamp_val(rpm, 1, 1000000);
120 return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
121}
122
123static int FAN_FROM_REG(u8 val, int div)
124{
125 return val == 0 ? -1 : val == 255 ? 0 : 1350000 / (val * div);
126}
127
128/* These constants are a guess, consistent w/ w83781d */
129#define ASB100_TEMP_MIN -128000
130#define ASB100_TEMP_MAX 127000
131
132/*
133 * TEMP: 0.001C/bit (-128C to +127C)
134 * REG: 1C/bit, two's complement
135 */
136static u8 TEMP_TO_REG(long temp)
137{
138 int ntemp = clamp_val(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
139 ntemp += (ntemp < 0 ? -500 : 500);
140 return (u8)(ntemp / 1000);
141}
142
143static int TEMP_FROM_REG(u8 reg)
144{
145 return (s8)reg * 1000;
146}
147
148/*
149 * PWM: 0 - 255 per sensors documentation
150 * REG: (6.25% duty cycle per bit)
151 */
152static u8 ASB100_PWM_TO_REG(int pwm)
153{
154 pwm = clamp_val(pwm, 0, 255);
155 return (u8)(pwm / 16);
156}
157
158static int ASB100_PWM_FROM_REG(u8 reg)
159{
160 return reg * 16;
161}
162
163#define DIV_FROM_REG(val) (1 << (val))
164
165/*
166 * FAN DIV: 1, 2, 4, or 8 (defaults to 2)
167 * REG: 0, 1, 2, or 3 (respectively) (defaults to 1)
168 */
169static u8 DIV_TO_REG(long val)
170{
171 return val == 8 ? 3 : val == 4 ? 2 : val == 1 ? 0 : 1;
172}
173
174/*
175 * For each registered client, we need to keep some data in memory. That
176 * data is pointed to by client->data. The structure itself is
177 * dynamically allocated, at the same time the client itself is allocated.
178 */
179struct asb100_data {
180 struct device *hwmon_dev;
181 struct mutex lock;
182
183 struct mutex update_lock;
184 unsigned long last_updated; /* In jiffies */
185
186 /* array of 2 pointers to subclients */
187 struct i2c_client *lm75[2];
188
189 bool valid; /* true if following fields are valid */
190 u8 in[7]; /* Register value */
191 u8 in_max[7]; /* Register value */
192 u8 in_min[7]; /* Register value */
193 u8 fan[3]; /* Register value */
194 u8 fan_min[3]; /* Register value */
195 u16 temp[4]; /* Register value (0 and 3 are u8 only) */
196 u16 temp_max[4]; /* Register value (0 and 3 are u8 only) */
197 u16 temp_hyst[4]; /* Register value (0 and 3 are u8 only) */
198 u8 fan_div[3]; /* Register encoding, right justified */
199 u8 pwm; /* Register encoding */
200 u8 vid; /* Register encoding, combined */
201 u32 alarms; /* Register encoding, combined */
202 u8 vrm;
203};
204
205static int asb100_read_value(struct i2c_client *client, u16 reg);
206static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val);
207
208static int asb100_probe(struct i2c_client *client);
209static int asb100_detect(struct i2c_client *client,
210 struct i2c_board_info *info);
211static void asb100_remove(struct i2c_client *client);
212static struct asb100_data *asb100_update_device(struct device *dev);
213static void asb100_init_client(struct i2c_client *client);
214
215static const struct i2c_device_id asb100_id[] = {
216 { "asb100", 0 },
217 { }
218};
219MODULE_DEVICE_TABLE(i2c, asb100_id);
220
221static struct i2c_driver asb100_driver = {
222 .class = I2C_CLASS_HWMON,
223 .driver = {
224 .name = "asb100",
225 },
226 .probe_new = asb100_probe,
227 .remove = asb100_remove,
228 .id_table = asb100_id,
229 .detect = asb100_detect,
230 .address_list = normal_i2c,
231};
232
233/* 7 Voltages */
234#define show_in_reg(reg) \
235static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
236 char *buf) \
237{ \
238 int nr = to_sensor_dev_attr(attr)->index; \
239 struct asb100_data *data = asb100_update_device(dev); \
240 return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \
241}
242
243show_in_reg(in)
244show_in_reg(in_min)
245show_in_reg(in_max)
246
247#define set_in_reg(REG, reg) \
248static ssize_t set_in_##reg(struct device *dev, struct device_attribute *attr, \
249 const char *buf, size_t count) \
250{ \
251 int nr = to_sensor_dev_attr(attr)->index; \
252 struct i2c_client *client = to_i2c_client(dev); \
253 struct asb100_data *data = i2c_get_clientdata(client); \
254 unsigned long val; \
255 int err = kstrtoul(buf, 10, &val); \
256 if (err) \
257 return err; \
258 mutex_lock(&data->update_lock); \
259 data->in_##reg[nr] = IN_TO_REG(val); \
260 asb100_write_value(client, ASB100_REG_IN_##REG(nr), \
261 data->in_##reg[nr]); \
262 mutex_unlock(&data->update_lock); \
263 return count; \
264}
265
266set_in_reg(MIN, min)
267set_in_reg(MAX, max)
268
269#define sysfs_in(offset) \
270static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
271 show_in, NULL, offset); \
272static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
273 show_in_min, set_in_min, offset); \
274static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
275 show_in_max, set_in_max, offset)
276
277sysfs_in(0);
278sysfs_in(1);
279sysfs_in(2);
280sysfs_in(3);
281sysfs_in(4);
282sysfs_in(5);
283sysfs_in(6);
284
285/* 3 Fans */
286static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
287 char *buf)
288{
289 int nr = to_sensor_dev_attr(attr)->index;
290 struct asb100_data *data = asb100_update_device(dev);
291 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
292 DIV_FROM_REG(data->fan_div[nr])));
293}
294
295static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
296 char *buf)
297{
298 int nr = to_sensor_dev_attr(attr)->index;
299 struct asb100_data *data = asb100_update_device(dev);
300 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
301 DIV_FROM_REG(data->fan_div[nr])));
302}
303
304static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
305 char *buf)
306{
307 int nr = to_sensor_dev_attr(attr)->index;
308 struct asb100_data *data = asb100_update_device(dev);
309 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
310}
311
312static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
313 const char *buf, size_t count)
314{
315 int nr = to_sensor_dev_attr(attr)->index;
316 struct i2c_client *client = to_i2c_client(dev);
317 struct asb100_data *data = i2c_get_clientdata(client);
318 unsigned long val;
319 int err;
320
321 err = kstrtoul(buf, 10, &val);
322 if (err)
323 return err;
324
325 mutex_lock(&data->update_lock);
326 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
327 asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
328 mutex_unlock(&data->update_lock);
329 return count;
330}
331
332/*
333 * Note: we save and restore the fan minimum here, because its value is
334 * determined in part by the fan divisor. This follows the principle of
335 * least surprise; the user doesn't expect the fan minimum to change just
336 * because the divisor changed.
337 */
338static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
339 const char *buf, size_t count)
340{
341 int nr = to_sensor_dev_attr(attr)->index;
342 struct i2c_client *client = to_i2c_client(dev);
343 struct asb100_data *data = i2c_get_clientdata(client);
344 unsigned long min;
345 int reg;
346 unsigned long val;
347 int err;
348
349 err = kstrtoul(buf, 10, &val);
350 if (err)
351 return err;
352
353 mutex_lock(&data->update_lock);
354
355 min = FAN_FROM_REG(data->fan_min[nr],
356 DIV_FROM_REG(data->fan_div[nr]));
357 data->fan_div[nr] = DIV_TO_REG(val);
358
359 switch (nr) {
360 case 0: /* fan 1 */
361 reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
362 reg = (reg & 0xcf) | (data->fan_div[0] << 4);
363 asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
364 break;
365
366 case 1: /* fan 2 */
367 reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
368 reg = (reg & 0x3f) | (data->fan_div[1] << 6);
369 asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
370 break;
371
372 case 2: /* fan 3 */
373 reg = asb100_read_value(client, ASB100_REG_PIN);
374 reg = (reg & 0x3f) | (data->fan_div[2] << 6);
375 asb100_write_value(client, ASB100_REG_PIN, reg);
376 break;
377 }
378
379 data->fan_min[nr] =
380 FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
381 asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
382
383 mutex_unlock(&data->update_lock);
384
385 return count;
386}
387
388#define sysfs_fan(offset) \
389static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
390 show_fan, NULL, offset - 1); \
391static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
392 show_fan_min, set_fan_min, offset - 1); \
393static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
394 show_fan_div, set_fan_div, offset - 1)
395
396sysfs_fan(1);
397sysfs_fan(2);
398sysfs_fan(3);
399
400/* 4 Temp. Sensors */
401static int sprintf_temp_from_reg(u16 reg, char *buf, int nr)
402{
403 int ret = 0;
404
405 switch (nr) {
406 case 1: case 2:
407 ret = sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(reg));
408 break;
409 case 0: case 3: default:
410 ret = sprintf(buf, "%d\n", TEMP_FROM_REG(reg));
411 break;
412 }
413 return ret;
414}
415
416#define show_temp_reg(reg) \
417static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
418 char *buf) \
419{ \
420 int nr = to_sensor_dev_attr(attr)->index; \
421 struct asb100_data *data = asb100_update_device(dev); \
422 return sprintf_temp_from_reg(data->reg[nr], buf, nr); \
423}
424
425show_temp_reg(temp);
426show_temp_reg(temp_max);
427show_temp_reg(temp_hyst);
428
429#define set_temp_reg(REG, reg) \
430static ssize_t set_##reg(struct device *dev, struct device_attribute *attr, \
431 const char *buf, size_t count) \
432{ \
433 int nr = to_sensor_dev_attr(attr)->index; \
434 struct i2c_client *client = to_i2c_client(dev); \
435 struct asb100_data *data = i2c_get_clientdata(client); \
436 long val; \
437 int err = kstrtol(buf, 10, &val); \
438 if (err) \
439 return err; \
440 mutex_lock(&data->update_lock); \
441 switch (nr) { \
442 case 1: case 2: \
443 data->reg[nr] = LM75_TEMP_TO_REG(val); \
444 break; \
445 case 0: case 3: default: \
446 data->reg[nr] = TEMP_TO_REG(val); \
447 break; \
448 } \
449 asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \
450 data->reg[nr]); \
451 mutex_unlock(&data->update_lock); \
452 return count; \
453}
454
455set_temp_reg(MAX, temp_max);
456set_temp_reg(HYST, temp_hyst);
457
458#define sysfs_temp(num) \
459static SENSOR_DEVICE_ATTR(temp##num##_input, S_IRUGO, \
460 show_temp, NULL, num - 1); \
461static SENSOR_DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \
462 show_temp_max, set_temp_max, num - 1); \
463static SENSOR_DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \
464 show_temp_hyst, set_temp_hyst, num - 1)
465
466sysfs_temp(1);
467sysfs_temp(2);
468sysfs_temp(3);
469sysfs_temp(4);
470
471/* VID */
472static ssize_t cpu0_vid_show(struct device *dev,
473 struct device_attribute *attr, char *buf)
474{
475 struct asb100_data *data = asb100_update_device(dev);
476 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
477}
478
479static DEVICE_ATTR_RO(cpu0_vid);
480
481/* VRM */
482static ssize_t vrm_show(struct device *dev, struct device_attribute *attr,
483 char *buf)
484{
485 struct asb100_data *data = dev_get_drvdata(dev);
486 return sprintf(buf, "%d\n", data->vrm);
487}
488
489static ssize_t vrm_store(struct device *dev, struct device_attribute *attr,
490 const char *buf, size_t count)
491{
492 struct asb100_data *data = dev_get_drvdata(dev);
493 unsigned long val;
494 int err;
495
496 err = kstrtoul(buf, 10, &val);
497 if (err)
498 return err;
499
500 if (val > 255)
501 return -EINVAL;
502
503 data->vrm = val;
504 return count;
505}
506
507/* Alarms */
508static DEVICE_ATTR_RW(vrm);
509
510static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
511 char *buf)
512{
513 struct asb100_data *data = asb100_update_device(dev);
514 return sprintf(buf, "%u\n", data->alarms);
515}
516
517static DEVICE_ATTR_RO(alarms);
518
519static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
520 char *buf)
521{
522 int bitnr = to_sensor_dev_attr(attr)->index;
523 struct asb100_data *data = asb100_update_device(dev);
524 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
525}
526static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
527static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
528static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
529static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
530static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
531static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
532static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
533static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
534static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
535static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
536static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13);
537
538/* 1 PWM */
539static ssize_t pwm1_show(struct device *dev, struct device_attribute *attr,
540 char *buf)
541{
542 struct asb100_data *data = asb100_update_device(dev);
543 return sprintf(buf, "%d\n", ASB100_PWM_FROM_REG(data->pwm & 0x0f));
544}
545
546static ssize_t pwm1_store(struct device *dev, struct device_attribute *attr,
547 const char *buf, size_t count)
548{
549 struct i2c_client *client = to_i2c_client(dev);
550 struct asb100_data *data = i2c_get_clientdata(client);
551 unsigned long val;
552 int err;
553
554 err = kstrtoul(buf, 10, &val);
555 if (err)
556 return err;
557
558 mutex_lock(&data->update_lock);
559 data->pwm &= 0x80; /* keep the enable bit */
560 data->pwm |= (0x0f & ASB100_PWM_TO_REG(val));
561 asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
562 mutex_unlock(&data->update_lock);
563 return count;
564}
565
566static ssize_t pwm1_enable_show(struct device *dev,
567 struct device_attribute *attr, char *buf)
568{
569 struct asb100_data *data = asb100_update_device(dev);
570 return sprintf(buf, "%d\n", (data->pwm & 0x80) ? 1 : 0);
571}
572
573static ssize_t pwm1_enable_store(struct device *dev,
574 struct device_attribute *attr,
575 const char *buf, size_t count)
576{
577 struct i2c_client *client = to_i2c_client(dev);
578 struct asb100_data *data = i2c_get_clientdata(client);
579 unsigned long val;
580 int err;
581
582 err = kstrtoul(buf, 10, &val);
583 if (err)
584 return err;
585
586 mutex_lock(&data->update_lock);
587 data->pwm &= 0x0f; /* keep the duty cycle bits */
588 data->pwm |= (val ? 0x80 : 0x00);
589 asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
590 mutex_unlock(&data->update_lock);
591 return count;
592}
593
594static DEVICE_ATTR_RW(pwm1);
595static DEVICE_ATTR_RW(pwm1_enable);
596
597static struct attribute *asb100_attributes[] = {
598 &sensor_dev_attr_in0_input.dev_attr.attr,
599 &sensor_dev_attr_in0_min.dev_attr.attr,
600 &sensor_dev_attr_in0_max.dev_attr.attr,
601 &sensor_dev_attr_in1_input.dev_attr.attr,
602 &sensor_dev_attr_in1_min.dev_attr.attr,
603 &sensor_dev_attr_in1_max.dev_attr.attr,
604 &sensor_dev_attr_in2_input.dev_attr.attr,
605 &sensor_dev_attr_in2_min.dev_attr.attr,
606 &sensor_dev_attr_in2_max.dev_attr.attr,
607 &sensor_dev_attr_in3_input.dev_attr.attr,
608 &sensor_dev_attr_in3_min.dev_attr.attr,
609 &sensor_dev_attr_in3_max.dev_attr.attr,
610 &sensor_dev_attr_in4_input.dev_attr.attr,
611 &sensor_dev_attr_in4_min.dev_attr.attr,
612 &sensor_dev_attr_in4_max.dev_attr.attr,
613 &sensor_dev_attr_in5_input.dev_attr.attr,
614 &sensor_dev_attr_in5_min.dev_attr.attr,
615 &sensor_dev_attr_in5_max.dev_attr.attr,
616 &sensor_dev_attr_in6_input.dev_attr.attr,
617 &sensor_dev_attr_in6_min.dev_attr.attr,
618 &sensor_dev_attr_in6_max.dev_attr.attr,
619
620 &sensor_dev_attr_fan1_input.dev_attr.attr,
621 &sensor_dev_attr_fan1_min.dev_attr.attr,
622 &sensor_dev_attr_fan1_div.dev_attr.attr,
623 &sensor_dev_attr_fan2_input.dev_attr.attr,
624 &sensor_dev_attr_fan2_min.dev_attr.attr,
625 &sensor_dev_attr_fan2_div.dev_attr.attr,
626 &sensor_dev_attr_fan3_input.dev_attr.attr,
627 &sensor_dev_attr_fan3_min.dev_attr.attr,
628 &sensor_dev_attr_fan3_div.dev_attr.attr,
629
630 &sensor_dev_attr_temp1_input.dev_attr.attr,
631 &sensor_dev_attr_temp1_max.dev_attr.attr,
632 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
633 &sensor_dev_attr_temp2_input.dev_attr.attr,
634 &sensor_dev_attr_temp2_max.dev_attr.attr,
635 &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
636 &sensor_dev_attr_temp3_input.dev_attr.attr,
637 &sensor_dev_attr_temp3_max.dev_attr.attr,
638 &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
639 &sensor_dev_attr_temp4_input.dev_attr.attr,
640 &sensor_dev_attr_temp4_max.dev_attr.attr,
641 &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
642
643 &sensor_dev_attr_in0_alarm.dev_attr.attr,
644 &sensor_dev_attr_in1_alarm.dev_attr.attr,
645 &sensor_dev_attr_in2_alarm.dev_attr.attr,
646 &sensor_dev_attr_in3_alarm.dev_attr.attr,
647 &sensor_dev_attr_in4_alarm.dev_attr.attr,
648 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
649 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
650 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
651 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
652 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
653 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
654
655 &dev_attr_cpu0_vid.attr,
656 &dev_attr_vrm.attr,
657 &dev_attr_alarms.attr,
658 &dev_attr_pwm1.attr,
659 &dev_attr_pwm1_enable.attr,
660
661 NULL
662};
663
664static const struct attribute_group asb100_group = {
665 .attrs = asb100_attributes,
666};
667
668static int asb100_detect_subclients(struct i2c_client *client)
669{
670 int i, id, err;
671 int address = client->addr;
672 unsigned short sc_addr[2];
673 struct asb100_data *data = i2c_get_clientdata(client);
674 struct i2c_adapter *adapter = client->adapter;
675
676 id = i2c_adapter_id(adapter);
677
678 if (force_subclients[0] == id && force_subclients[1] == address) {
679 for (i = 2; i <= 3; i++) {
680 if (force_subclients[i] < 0x48 ||
681 force_subclients[i] > 0x4f) {
682 dev_err(&client->dev,
683 "invalid subclient address %d; must be 0x48-0x4f\n",
684 force_subclients[i]);
685 err = -ENODEV;
686 goto ERROR_SC_2;
687 }
688 }
689 asb100_write_value(client, ASB100_REG_I2C_SUBADDR,
690 (force_subclients[2] & 0x07) |
691 ((force_subclients[3] & 0x07) << 4));
692 sc_addr[0] = force_subclients[2];
693 sc_addr[1] = force_subclients[3];
694 } else {
695 int val = asb100_read_value(client, ASB100_REG_I2C_SUBADDR);
696 sc_addr[0] = 0x48 + (val & 0x07);
697 sc_addr[1] = 0x48 + ((val >> 4) & 0x07);
698 }
699
700 if (sc_addr[0] == sc_addr[1]) {
701 dev_err(&client->dev,
702 "duplicate addresses 0x%x for subclients\n",
703 sc_addr[0]);
704 err = -ENODEV;
705 goto ERROR_SC_2;
706 }
707
708 data->lm75[0] = i2c_new_dummy_device(adapter, sc_addr[0]);
709 if (IS_ERR(data->lm75[0])) {
710 dev_err(&client->dev,
711 "subclient %d registration at address 0x%x failed.\n",
712 1, sc_addr[0]);
713 err = PTR_ERR(data->lm75[0]);
714 goto ERROR_SC_2;
715 }
716
717 data->lm75[1] = i2c_new_dummy_device(adapter, sc_addr[1]);
718 if (IS_ERR(data->lm75[1])) {
719 dev_err(&client->dev,
720 "subclient %d registration at address 0x%x failed.\n",
721 2, sc_addr[1]);
722 err = PTR_ERR(data->lm75[1]);
723 goto ERROR_SC_3;
724 }
725
726 return 0;
727
728/* Undo inits in case of errors */
729ERROR_SC_3:
730 i2c_unregister_device(data->lm75[0]);
731ERROR_SC_2:
732 return err;
733}
734
735/* Return 0 if detection is successful, -ENODEV otherwise */
736static int asb100_detect(struct i2c_client *client,
737 struct i2c_board_info *info)
738{
739 struct i2c_adapter *adapter = client->adapter;
740 int val1, val2;
741
742 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
743 pr_debug("detect failed, smbus byte data not supported!\n");
744 return -ENODEV;
745 }
746
747 val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
748 val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
749
750 /* If we're in bank 0 */
751 if ((!(val1 & 0x07)) &&
752 /* Check for ASB100 ID (low byte) */
753 (((!(val1 & 0x80)) && (val2 != 0x94)) ||
754 /* Check for ASB100 ID (high byte ) */
755 ((val1 & 0x80) && (val2 != 0x06)))) {
756 pr_debug("detect failed, bad chip id 0x%02x!\n", val2);
757 return -ENODEV;
758 }
759
760 /* Put it now into bank 0 and Vendor ID High Byte */
761 i2c_smbus_write_byte_data(client, ASB100_REG_BANK,
762 (i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78)
763 | 0x80);
764
765 /* Determine the chip type. */
766 val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
767 val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
768
769 if (val1 != 0x31 || val2 != 0x06)
770 return -ENODEV;
771
772 strscpy(info->type, "asb100", I2C_NAME_SIZE);
773
774 return 0;
775}
776
777static int asb100_probe(struct i2c_client *client)
778{
779 int err;
780 struct asb100_data *data;
781
782 data = devm_kzalloc(&client->dev, sizeof(struct asb100_data),
783 GFP_KERNEL);
784 if (!data)
785 return -ENOMEM;
786
787 i2c_set_clientdata(client, data);
788 mutex_init(&data->lock);
789 mutex_init(&data->update_lock);
790
791 /* Attach secondary lm75 clients */
792 err = asb100_detect_subclients(client);
793 if (err)
794 return err;
795
796 /* Initialize the chip */
797 asb100_init_client(client);
798
799 /* A few vars need to be filled upon startup */
800 data->fan_min[0] = asb100_read_value(client, ASB100_REG_FAN_MIN(0));
801 data->fan_min[1] = asb100_read_value(client, ASB100_REG_FAN_MIN(1));
802 data->fan_min[2] = asb100_read_value(client, ASB100_REG_FAN_MIN(2));
803
804 /* Register sysfs hooks */
805 err = sysfs_create_group(&client->dev.kobj, &asb100_group);
806 if (err)
807 goto ERROR3;
808
809 data->hwmon_dev = hwmon_device_register(&client->dev);
810 if (IS_ERR(data->hwmon_dev)) {
811 err = PTR_ERR(data->hwmon_dev);
812 goto ERROR4;
813 }
814
815 return 0;
816
817ERROR4:
818 sysfs_remove_group(&client->dev.kobj, &asb100_group);
819ERROR3:
820 i2c_unregister_device(data->lm75[1]);
821 i2c_unregister_device(data->lm75[0]);
822 return err;
823}
824
825static void asb100_remove(struct i2c_client *client)
826{
827 struct asb100_data *data = i2c_get_clientdata(client);
828
829 hwmon_device_unregister(data->hwmon_dev);
830 sysfs_remove_group(&client->dev.kobj, &asb100_group);
831
832 i2c_unregister_device(data->lm75[1]);
833 i2c_unregister_device(data->lm75[0]);
834}
835
836/*
837 * The SMBus locks itself, usually, but nothing may access the chip between
838 * bank switches.
839 */
840static int asb100_read_value(struct i2c_client *client, u16 reg)
841{
842 struct asb100_data *data = i2c_get_clientdata(client);
843 struct i2c_client *cl;
844 int res, bank;
845
846 mutex_lock(&data->lock);
847
848 bank = (reg >> 8) & 0x0f;
849 if (bank > 2)
850 /* switch banks */
851 i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
852
853 if (bank == 0 || bank > 2) {
854 res = i2c_smbus_read_byte_data(client, reg & 0xff);
855 } else {
856 /* switch to subclient */
857 cl = data->lm75[bank - 1];
858
859 /* convert from ISA to LM75 I2C addresses */
860 switch (reg & 0xff) {
861 case 0x50: /* TEMP */
862 res = i2c_smbus_read_word_swapped(cl, 0);
863 break;
864 case 0x52: /* CONFIG */
865 res = i2c_smbus_read_byte_data(cl, 1);
866 break;
867 case 0x53: /* HYST */
868 res = i2c_smbus_read_word_swapped(cl, 2);
869 break;
870 case 0x55: /* MAX */
871 default:
872 res = i2c_smbus_read_word_swapped(cl, 3);
873 break;
874 }
875 }
876
877 if (bank > 2)
878 i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
879
880 mutex_unlock(&data->lock);
881
882 return res;
883}
884
885static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value)
886{
887 struct asb100_data *data = i2c_get_clientdata(client);
888 struct i2c_client *cl;
889 int bank;
890
891 mutex_lock(&data->lock);
892
893 bank = (reg >> 8) & 0x0f;
894 if (bank > 2)
895 /* switch banks */
896 i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
897
898 if (bank == 0 || bank > 2) {
899 i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff);
900 } else {
901 /* switch to subclient */
902 cl = data->lm75[bank - 1];
903
904 /* convert from ISA to LM75 I2C addresses */
905 switch (reg & 0xff) {
906 case 0x52: /* CONFIG */
907 i2c_smbus_write_byte_data(cl, 1, value & 0xff);
908 break;
909 case 0x53: /* HYST */
910 i2c_smbus_write_word_swapped(cl, 2, value);
911 break;
912 case 0x55: /* MAX */
913 i2c_smbus_write_word_swapped(cl, 3, value);
914 break;
915 }
916 }
917
918 if (bank > 2)
919 i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
920
921 mutex_unlock(&data->lock);
922}
923
924static void asb100_init_client(struct i2c_client *client)
925{
926 struct asb100_data *data = i2c_get_clientdata(client);
927
928 data->vrm = vid_which_vrm();
929
930 /* Start monitoring */
931 asb100_write_value(client, ASB100_REG_CONFIG,
932 (asb100_read_value(client, ASB100_REG_CONFIG) & 0xf7) | 0x01);
933}
934
935static struct asb100_data *asb100_update_device(struct device *dev)
936{
937 struct i2c_client *client = to_i2c_client(dev);
938 struct asb100_data *data = i2c_get_clientdata(client);
939 int i;
940
941 mutex_lock(&data->update_lock);
942
943 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
944 || !data->valid) {
945
946 dev_dbg(&client->dev, "starting device update...\n");
947
948 /* 7 voltage inputs */
949 for (i = 0; i < 7; i++) {
950 data->in[i] = asb100_read_value(client,
951 ASB100_REG_IN(i));
952 data->in_min[i] = asb100_read_value(client,
953 ASB100_REG_IN_MIN(i));
954 data->in_max[i] = asb100_read_value(client,
955 ASB100_REG_IN_MAX(i));
956 }
957
958 /* 3 fan inputs */
959 for (i = 0; i < 3; i++) {
960 data->fan[i] = asb100_read_value(client,
961 ASB100_REG_FAN(i));
962 data->fan_min[i] = asb100_read_value(client,
963 ASB100_REG_FAN_MIN(i));
964 }
965
966 /* 4 temperature inputs */
967 for (i = 1; i <= 4; i++) {
968 data->temp[i-1] = asb100_read_value(client,
969 ASB100_REG_TEMP(i));
970 data->temp_max[i-1] = asb100_read_value(client,
971 ASB100_REG_TEMP_MAX(i));
972 data->temp_hyst[i-1] = asb100_read_value(client,
973 ASB100_REG_TEMP_HYST(i));
974 }
975
976 /* VID and fan divisors */
977 i = asb100_read_value(client, ASB100_REG_VID_FANDIV);
978 data->vid = i & 0x0f;
979 data->vid |= (asb100_read_value(client,
980 ASB100_REG_CHIPID) & 0x01) << 4;
981 data->fan_div[0] = (i >> 4) & 0x03;
982 data->fan_div[1] = (i >> 6) & 0x03;
983 data->fan_div[2] = (asb100_read_value(client,
984 ASB100_REG_PIN) >> 6) & 0x03;
985
986 /* PWM */
987 data->pwm = asb100_read_value(client, ASB100_REG_PWM1);
988
989 /* alarms */
990 data->alarms = asb100_read_value(client, ASB100_REG_ALARM1) +
991 (asb100_read_value(client, ASB100_REG_ALARM2) << 8);
992
993 data->last_updated = jiffies;
994 data->valid = true;
995
996 dev_dbg(&client->dev, "... device update complete\n");
997 }
998
999 mutex_unlock(&data->update_lock);
1000
1001 return data;
1002}
1003
1004module_i2c_driver(asb100_driver);
1005
1006MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
1007MODULE_DESCRIPTION("ASB100 Bach driver");
1008MODULE_LICENSE("GPL");